circuit-json-to-gerber 0.0.62 → 0.0.64

package/dist/{chunk-KJGFE3X3.js → chunk-I77ERJH4.js}

@@ -1579,6 +1579,64 @@ var getApertureConfigFromPcbPlatedHole = (elm) => {
     `Unsupported shape in getApertureConfigFromPcbPlatedHole: ${elm.shape}`
   );
 };
+var getApertureConfigFromPcbPlatedHoleSoldermask = (elm) => {
+  let soldermaskMargin = 0;
+  if ("soldermask_margin" in elm && typeof elm.soldermask_margin === "number") {
+    soldermaskMargin = elm.soldermask_margin;
+  }
+  if (elm.shape === "circle") {
+    if (!("outer_diameter" in elm && "hole_diameter" in elm)) {
+      throw new Error(
+        "Invalid circle shape in getApertureConfigFromPcbPlatedHoleSoldermask: missing diameters"
+      );
+    }
+    return {
+      standard_template_code: "C",
+      diameter: elm.outer_diameter + soldermaskMargin * 2
+    };
+  }
+  if (elm.shape === "pill") {
+    if (!("outer_width" in elm && "outer_height" in elm)) {
+      throw new Error(
+        "Invalid pill shape in getApertureConfigFromPcbPlatedHoleSoldermask: missing dimensions"
+      );
+    }
+    const outerWidth = elm.outer_width + soldermaskMargin * 2;
+    const outerHeight = elm.outer_height + soldermaskMargin * 2;
+    if (outerWidth > outerHeight) {
+      return {
+        macro_name: "HORZPILL",
+        x_size: outerWidth,
+        y_size: outerHeight,
+        circle_diameter: Math.min(outerWidth, outerHeight),
+        circle_center_offset: outerWidth / 2
+      };
+    }
+    return {
+      macro_name: "VERTPILL",
+      x_size: outerWidth,
+      y_size: outerHeight,
+      circle_diameter: Math.min(outerWidth, outerHeight),
+      circle_center_offset: outerHeight / 2
+    };
+  }
+  const shape = elm.shape;
+  if (shape === "circular_hole_with_rect_pad" || shape === "pill_hole_with_rect_pad" || shape === "rotated_pill_hole_with_rect_pad") {
+    if (!("rect_pad_width" in elm && "rect_pad_height" in elm)) {
+      throw new Error(
+        `Invalid ${shape} shape in getApertureConfigFromPcbPlatedHoleSoldermask: missing dimensions`
+      );
+    }
+    return {
+      standard_template_code: "R",
+      x_size: elm.rect_pad_width + soldermaskMargin * 2,
+      y_size: elm.rect_pad_height + soldermaskMargin * 2
+    };
+  }
+  throw new Error(
+    `Unsupported shape in getApertureConfigFromPcbPlatedHoleSoldermask: ${elm.shape}`
+  );
+};
 var getApertureConfigFromCirclePcbHole = (elm) => {
   if (!("hole_diameter" in elm)) {
     throw new Error(
@@ -1590,6 +1648,21 @@ var getApertureConfigFromCirclePcbHole = (elm) => {
     diameter: elm.hole_diameter
   };
 };
+var getApertureConfigFromCirclePcbHoleSoldermask = (elm) => {
+  if (!("hole_diameter" in elm)) {
+    throw new Error(
+      `Invalid shape called in getApertureConfigFromCirclePcbHoleSoldermask: ${elm.hole_shape}`
+    );
+  }
+  let soldermaskMargin = 0;
+  if ("soldermask_margin" in elm && typeof elm.soldermask_margin === "number") {
+    soldermaskMargin = elm.soldermask_margin;
+  }
+  return {
+    standard_template_code: "C",
+    diameter: elm.hole_diameter + soldermaskMargin * 2
+  };
+};
 var getApertureConfigFromOuterDiameter = (elm) => {
   if (typeof elm.outer_diameter !== "number") {
     throw new Error(
@@ -1643,15 +1716,24 @@ function getAllApertureTemplateConfigsForLayer({
         if (glayer_name.endsWith("_Mask") && elm.is_covered_with_solder_mask === true) {
           continue;
         }
-        addConfigIfNew(getApertureConfigFromPcbPlatedHole(elm));
+        if (isSoldermaskLayer) {
+          addConfigIfNew(getApertureConfigFromPcbPlatedHoleSoldermask(elm));
+        } else {
+          addConfigIfNew(getApertureConfigFromPcbPlatedHole(elm));
+        }
       }
     } else if (elm.type === "pcb_hole") {
       if (glayer_name.endsWith("_Mask") && elm.is_covered_with_solder_mask === true) {
         continue;
       }
-      if (elm.hole_shape === "circle")
-        addConfigIfNew(getApertureConfigFromCirclePcbHole(elm));
-      else console.warn("NOT IMPLEMENTED: drawing gerber for non circle holes");
+      if (elm.hole_shape === "circle") {
+        if (isSoldermaskLayer) {
+          addConfigIfNew(getApertureConfigFromCirclePcbHoleSoldermask(elm));
+        } else {
+          addConfigIfNew(getApertureConfigFromCirclePcbHole(elm));
+        }
+      } else
+        console.warn("NOT IMPLEMENTED: drawing gerber for non circle holes");
     } else if (elm.type === "pcb_via") {
       addConfigIfNew(getApertureConfigFromOuterDiameter(elm));
     } else if (elm.type === "pcb_trace") {
@@ -1698,7 +1780,7 @@ var findApertureNumber = (glayer, search_params) => {
 // package.json
 var package_default = {
   name: "circuit-json-to-gerber",
-  version: "0.0.61",
+  version: "0.0.63",
   main: "dist/index.js",
   type: "module",
   scripts: {
@@ -2534,10 +2616,17 @@ var convertSoupToGerberCommands = (circuitJson, opts = {}) => {
               }
               glayer.push(...gb.build());
             } else {
-              const apertureConfig = getApertureConfigFromPcbPlatedHole({
+              const soldermaskGlayer = glayers[getGerberLayerName(layer, "soldermask")];
+              let apertureConfig = getApertureConfigFromPcbPlatedHole({
                 ...element,
                 ...element.shape !== "circle" ? { outer_width: padW, outer_height: padH } : {}
               });
+              if (glayer === soldermaskGlayer) {
+                apertureConfig = getApertureConfigFromPcbPlatedHoleSoldermask({
+                  ...element,
+                  ...element.shape !== "circle" ? { outer_width: padW, outer_height: padH } : {}
+                });
+              }
               const rotation = "rect_ccw_rotation" in element && typeof element.rect_ccw_rotation === "number" && Math.abs(padW - padH) > 1e-9 ? element.rect_ccw_rotation : void 0;
               const gb = gerberBuilder().add("select_aperture", {
                 aperture_number: findApertureNumber(glayer, apertureConfig)
@@ -2565,7 +2654,7 @@ var convertSoupToGerberCommands = (circuitJson, opts = {}) => {
               ...gerberBuilder().add("select_aperture", {
                 aperture_number: findApertureNumber(
                   glayer,
-                  getApertureConfigFromCirclePcbHole(element)
+                  getApertureConfigFromCirclePcbHoleSoldermask(element)
                 )
               }).add("flash_operation", { x: element.x, y: mfy(element.y) }).build()
             );
@@ -2819,4 +2908,4 @@ export {
   stringifyGerberCommands,
   convertSoupToGerberCommands
 };
-//# sourceMappingURL=chunk-KJGFE3X3.js.map
+//# sourceMappingURL=chunk-I77ERJH4.js.map

package/dist/chunk-I77ERJH4.js.map

@@ -0,0 +1 @@
+{"version":3,"sources":["../src/excellon-drill/commands/FMAT.ts","../src/excellon-drill/define-excellon-drill-command.ts","../src/excellon-drill/commands/G00.ts","../src/excellon-drill/commands/G01.ts","../src/excellon-drill/commands/G05.ts","../src/excellon-drill/commands/G85.ts","../src/excellon-drill/commands/G90.ts","../src/excellon-drill/commands/M15.ts","../src/excellon-drill/commands/M16.ts","../src/excellon-drill/commands/M30.ts","../src/excellon-drill/commands/M48.ts","../src/excellon-drill/commands/M95.ts","../src/excellon-drill/commands/define_tool.ts","../src/excellon-drill/commands/drill_at.ts","../src/excellon-drill/commands/header_attribute.ts","../src/excellon-drill/commands/header_comment.ts","../src/excellon-drill/commands/rewind.ts","../src/excellon-drill/commands/unit_format.ts","../src/excellon-drill/commands/use_tool.ts","../src/excellon-drill/commands/aper_function_header.ts","../src/excellon-drill/commands/percent_sign.ts","../src/excellon-drill/any-excellon-drill-command-map.ts","../src/excellon-drill/stringify-excellon-drill.ts","../src/excellon-drill/excellon-drill-builder.ts","../src/excellon-drill/convert-soup-to-excellon-drill-commands.ts","../src/gerber/commands/add_attribute_on_aperture.ts","../src/gerber/define-gerber-command.ts","../src/gerber/commands/add_attribute_on_file.ts","../src/gerber/commands/add_attribute_on_object.ts","../src/gerber/commands/aperture_block.ts","../src/gerber/commands/comment.ts","../src/gerber/commands/create_arc.ts","../src/gerber/commands/define_aperture.ts","../src/gerber/commands/define_macro_aperture_template.ts","../src/gerber/commands/delete_attribute.ts","../src/gerber/commands/end_of_file.ts","../src/gerber/commands/end_region_statement.ts","../src/gerber/commands/flash_operation.ts","../src/gerber/stringify-gerber/get-gerber-coordinate-with-padding.ts","../src/gerber/commands/load_mirroring.ts","../src/gerber/commands/load_polarity.ts","../src/gerber/commands/load_rotation.ts","../src/gerber/commands/load_scaling.ts","../src/gerber/commands/move_operation.ts","../src/gerber/commands/plot_operation.ts","../src/gerber/commands/set_coordinate_format.ts","../src/gerber/commands/set_current_aperture_d_code.ts","../src/gerber/commands/set_movement_mode_to_clockwise_circular.ts","../src/gerber/commands/set_movement_mode_to_counterclockwise_circular.ts","../src/gerber/commands/set_movement_mode_to_linear.ts","../src/gerber/commands/set_unit.ts","../src/gerber/commands/start_region_statement.ts","../src/gerber/commands/step_and_repeat.ts","../src/gerber/commands/format_specification.ts","../src/gerber/commands/set_layer_polarity.ts","../src/gerber/commands/define_aperture_template.ts","../src/gerber/commands/select_aperture.ts","../src/gerber/any_gerber_command.ts","../src/gerber/gerber-builder.ts","../src/gerber/stringify-gerber/stringify-gerber-command.ts","../src/gerber/stringify-gerber/stringify-gerber-command-layers.ts","../src/gerber/stringify-gerber/stringify-gerber-commands.ts","../src/gerber/utils/pairs.ts","../src/gerber/convert-soup-to-gerber-commands/define-common-macros.ts","../src/gerber/convert-soup-to-gerber-commands/defineAperturesForLayer.ts","../src/gerber/convert-soup-to-gerber-commands/getAllTraceWidths.ts","../src/gerber/convert-soup-to-gerber-commands/findApertureNumber.ts","../package.json","../src/gerber/convert-soup-to-gerber-commands/getCommandHeaders.ts","../src/gerber/convert-soup-to-gerber-commands/getGerberLayerName.ts","../src/gerber/convert-soup-to-gerber-commands/index.ts"],"sourcesContent":["import { z } from \"zod\"\nimport { defineExcellonDrillCommand } from \"../define-excellon-drill-command\"\n\nexport const FMAT = defineExcellonDrillCommand({\n  command_code: \"FMAT\",\n  schema: z.object({\n    command_code: z.literal(\"FMAT\").default(\"FMAT\"),\n    format: z.number(),\n  }),\n  stringify: (c) => `FMAT,${c.format}`,\n})\n","import type { AnyZodObject, z } from \"zod\"\n\nexport interface ExcellonDrillCommandDef<\n  K extends string,\n  T extends AnyZodObject | z.ZodIntersection<any, any>,\n> {\n  command_code: K\n  schema: T\n  stringify: (c: z.infer<T>) => string\n}\n\nexport const defineExcellonDrillCommand = <\n  K extends string,\n  T extends AnyZodObject | z.ZodIntersection<any, any>,\n>({\n  command_code,\n  schema,\n  stringify,\n}: {\n  command_code: K\n  schema: T\n  stringify: (c: z.infer<T>) => string\n}): ExcellonDrillCommandDef<K, T> => {\n  return {\n    command_code,\n    schema,\n    stringify,\n  }\n}\n","import { z } from \"zod\"\nimport { defineExcellonDrillCommand } from \"../define-excellon-drill-command\"\n\n/**\n * Rapid move without drilling\n */\nexport const G00 = defineExcellonDrillCommand({\n  command_code: \"G00\",\n  schema: z.object({\n    command_code: z.literal(\"G00\").default(\"G00\"),\n  }),\n  stringify: () => \"G00\",\n})\n","import { z } from \"zod\"\nimport { defineExcellonDrillCommand } from \"../define-excellon-drill-command\"\n\n/**\n * Linear move with drilling\n */\nexport const G01 = defineExcellonDrillCommand({\n  command_code: \"G01\",\n  schema: z.object({\n    command_code: z.literal(\"G01\").default(\"G01\"),\n  }),\n  stringify: () => \"G01\",\n})\n","import { z } from \"zod\"\nimport { defineExcellonDrillCommand } from \"../define-excellon-drill-command\"\n\nexport const G05 = defineExcellonDrillCommand({\n  command_code: \"G05\",\n  schema: z.object({\n    command_code: z.literal(\"G05\").default(\"G05\"),\n  }),\n  stringify: () => \"G05\",\n})\n","import { z } from \"zod\"\nimport { defineExcellonDrillCommand } from \"../define-excellon-drill-command\"\n\nexport const G85 = defineExcellonDrillCommand({\n  command_code: \"G85\",\n  schema: z.object({\n    command_code: z.literal(\"G85\").default(\"G85\"),\n    x: z.number(),\n    y: z.number(),\n    width: z.number(), // slot width = tool diameter\n  }),\n  stringify: ({ x, y }) => `G85X${x.toFixed(3)}Y${y.toFixed(3)}`,\n})\n","import { z } from \"zod\"\nimport { defineExcellonDrillCommand } from \"../define-excellon-drill-command\"\n\nexport const G90 = defineExcellonDrillCommand({\n  command_code: \"G90\",\n  schema: z.object({\n    command_code: z.literal(\"G90\").default(\"G90\"),\n  }),\n  stringify: () => \"G90\",\n})\n","import { z } from \"zod\"\nimport { defineExcellonDrillCommand } from \"../define-excellon-drill-command\"\n\n/**\n * Z-Axis Feed Down\n */\nexport const M15 = defineExcellonDrillCommand({\n  command_code: \"M15\",\n  schema: z.object({\n    command_code: z.literal(\"M15\").default(\"M15\"),\n  }),\n  stringify: () => \"M15\",\n})\n","import { z } from \"zod\"\nimport { defineExcellonDrillCommand } from \"../define-excellon-drill-command\"\n\n/**\n * Z-Axis Feed Up (lift drill up)\n */\nexport const M16 = defineExcellonDrillCommand({\n  command_code: \"M16\",\n  schema: z.object({\n    command_code: z.literal(\"M16\").default(\"M16\"),\n  }),\n  stringify: () => \"M16\",\n})\n","import { z } from \"zod\"\nimport { defineExcellonDrillCommand } from \"../define-excellon-drill-command\"\n\nexport const M30 = defineExcellonDrillCommand({\n  command_code: \"M30\",\n  schema: z.object({\n    command_code: z.literal(\"M30\").default(\"M30\"),\n  }),\n  stringify: () => \"M30\",\n})\n","import { z } from \"zod\"\nimport { defineExcellonDrillCommand } from \"../define-excellon-drill-command\"\n\nexport const M48 = defineExcellonDrillCommand({\n  command_code: \"M48\",\n  schema: z.object({\n    command_code: z.literal(\"M48\").default(\"M48\"),\n  }),\n  stringify: () => \"M48\",\n})\n","import { z } from \"zod\"\nimport { defineExcellonDrillCommand } from \"../define-excellon-drill-command\"\n\nexport const M95 = defineExcellonDrillCommand({\n  command_code: \"M95\",\n  schema: z.object({\n    command_code: z.literal(\"M95\").default(\"M95\"),\n  }),\n  stringify: () => \"M95\",\n})\n","import { z } from \"zod\"\nimport { defineExcellonDrillCommand } from \"../define-excellon-drill-command\"\n\nexport const define_tool = defineExcellonDrillCommand({\n  command_code: \"define_tool\",\n  schema: z.object({\n    command_code: z.literal(\"define_tool\").default(\"define_tool\"),\n    tool_number: z.number(),\n    diameter: z.number(),\n  }),\n  stringify: (c) => `T${c.tool_number}C${c.diameter.toFixed(6)}`,\n})\n","import { z } from \"zod\"\nimport { defineExcellonDrillCommand } from \"../define-excellon-drill-command\"\n\nexport const drill_at = defineExcellonDrillCommand({\n  command_code: \"drill_at\",\n  schema: z.object({\n    command_code: z.literal(\"drill_at\").default(\"drill_at\"),\n    x: z.number(),\n    y: z.number(),\n  }),\n  stringify: (c) => `X${c.x.toFixed(4)}Y${c.y.toFixed(4)}`,\n})\n","import { z } from \"zod\"\nimport { defineExcellonDrillCommand } from \"../define-excellon-drill-command\"\n\nexport const header_attribute = defineExcellonDrillCommand({\n  command_code: \"header_attribute\",\n  schema: z.object({\n    command_code: z.literal(\"header_attribute\").default(\"header_attribute\"),\n    attribute_name: z.string(),\n    attribute_value: z.string(),\n  }),\n  stringify({ attribute_name, attribute_value }) {\n    return `; #@! ${attribute_name},${attribute_value}`\n  },\n})\n","import { z } from \"zod\"\nimport { defineExcellonDrillCommand } from \"../define-excellon-drill-command\"\n\nexport const header_comment = defineExcellonDrillCommand({\n  command_code: \"header_comment\",\n  schema: z.object({\n    command_code: z.literal(\"header_comment\").default(\"header_comment\"),\n    text: z.string(),\n  }),\n  stringify({ text }) {\n    return `; ${text}`\n  },\n})\n","import { z } from \"zod\"\nimport { defineExcellonDrillCommand } from \"../define-excellon-drill-command\"\n\nexport const rewind = defineExcellonDrillCommand({\n  command_code: \"rewind\",\n  schema: z.object({\n    command_code: z.literal(\"rewind\").default(\"rewind\"),\n  }),\n  stringify: () => \"%\",\n})\n","import { z } from \"zod\"\nimport { defineExcellonDrillCommand } from \"../define-excellon-drill-command\"\n\nexport const unit_format = defineExcellonDrillCommand({\n  command_code: \"unit_format\",\n  schema: z.object({\n    command_code: z.literal(\"unit_format\").default(\"unit_format\"),\n    unit: z.union([z.literal(\"INCH\"), z.literal(\"METRIC\")]),\n    lz: z\n      .union([z.literal(\"LZ\"), z.literal(\"TZ\")])\n      .nullable()\n      .default(null),\n  }),\n  stringify(c) {\n    return `${c.unit}${!c.lz ? \"\" : `,${c.lz}`}`\n  },\n})\n","import { z } from \"zod\"\nimport { defineExcellonDrillCommand } from \"../define-excellon-drill-command\"\n\nexport const use_tool = defineExcellonDrillCommand({\n  command_code: \"use_tool\",\n  schema: z.object({\n    command_code: z.literal(\"use_tool\").default(\"use_tool\"),\n    tool_number: z.number(),\n  }),\n  stringify: (c) => `T${c.tool_number}`,\n})\n","import { z } from \"zod\"\nimport { defineExcellonDrillCommand } from \"../define-excellon-drill-command\"\n\nexport const aper_function_header = defineExcellonDrillCommand({\n  command_code: \"aper_function_header\",\n  schema: z.object({\n    command_code: z\n      .literal(\"aper_function_header\")\n      .default(\"aper_function_header\"),\n    is_plated: z.boolean(),\n  }),\n  stringify({ is_plated }) {\n    return is_plated\n      ? \"; #@! TA.AperFunction,Plated,PTH,ComponentDrill\"\n      : \"; #@! TA.AperFunction,NonPlated,NPTH,ComponentDrill\"\n  },\n})\n","import { z } from \"zod\"\nimport { defineExcellonDrillCommand } from \"../define-excellon-drill-command\"\n\nexport const percent_sign = defineExcellonDrillCommand({\n  command_code: \"percent_sign\",\n  schema: z.object({\n    command_code: z.literal(\"percent_sign\").default(\"percent_sign\"),\n  }),\n  stringify: () => \"%\",\n})\n","import type { z } from \"zod\"\nimport type { ExcellonDrillCommandDef } from \"./define-excellon-drill-command\"\nimport * as EDCMD from \"./commands\"\n\nexport const excellon_drill_command_map = {\n  G00: EDCMD.G00,\n  G01: EDCMD.G01,\n  G85: EDCMD.G85,\n  M48: EDCMD.M48,\n  M95: EDCMD.M95,\n  FMAT: EDCMD.FMAT,\n  unit_format: EDCMD.unit_format,\n  aper_function_header: EDCMD.aper_function_header,\n  percent_sign: EDCMD.percent_sign,\n  T: EDCMD.define_tool,\n  define_tool: EDCMD.define_tool,\n  use_tool: EDCMD.use_tool,\n  G90: EDCMD.G90,\n  G05: EDCMD.G05,\n  M15: EDCMD.M15,\n  M16: EDCMD.M16,\n  M30: EDCMD.M30,\n  drill_at: EDCMD.drill_at,\n  header_comment: EDCMD.header_comment,\n  header_attribute: EDCMD.header_attribute,\n  rewind: EDCMD.rewind,\n} satisfies Record<string, ExcellonDrillCommandDef<string, any>>\n\nexport type AnyExcellonDrillCommand = z.infer<\n  (typeof excellon_drill_command_map)[keyof typeof excellon_drill_command_map][\"schema\"]\n>\n","import {\n  type AnyExcellonDrillCommand,\n  excellon_drill_command_map,\n} from \"./any-excellon-drill-command-map\"\n\nexport const stringifyExcellonDrill = (\n  commands: Array<AnyExcellonDrillCommand>,\n) => {\n  return commands\n    .map((c) => {\n      const def = excellon_drill_command_map[c.command_code]\n      return def.stringify(c as any)\n    })\n    .join(\"\\n\")\n}\n","import type { z } from \"zod\"\nimport {\n  type AnyExcellonDrillCommand,\n  excellon_drill_command_map,\n} from \"./any-excellon-drill-command-map\"\n\nclass ExcellonDrillBuilder {\n  commands: Array<AnyExcellonDrillCommand>\n\n  constructor() {\n    this.commands = []\n  }\n\n  add<T extends keyof typeof excellon_drill_command_map>(\n    cmd: T,\n    props: z.input<(typeof excellon_drill_command_map)[T][\"schema\"]>,\n  ): ExcellonDrillBuilder {\n    this.commands.push({\n      ...({\n        command_code: excellon_drill_command_map[cmd].command_code,\n      } as any),\n      ...props,\n    })\n    return this\n  }\n\n  build(): Array<AnyExcellonDrillCommand> {\n    return this.commands\n  }\n}\n\nexport const excellonDrill = () => new ExcellonDrillBuilder()\n","import type { AnyCircuitElement, LayerRef } from \"circuit-json\"\nimport type { AnyExcellonDrillCommand } from \"./any-excellon-drill-command-map\"\nimport { excellonDrill } from \"./excellon-drill-builder\"\n\nexport type DrillLayerSpan = {\n  from_layer: LayerRef\n  to_layer: LayerRef\n}\n\nconst getLayerCount = (circuitJson: Array<AnyCircuitElement>) => {\n  const board = circuitJson.find((element) => element.type === \"pcb_board\") as\n    | { num_layers?: number }\n    | undefined\n  if (!board || typeof board.num_layers !== \"number\") {\n    return 2\n  }\n  return Math.max(2, board.num_layers)\n}\n\nconst getLayerNumber = (layer: LayerRef, layerCount: number) => {\n  if (layer === \"top\") return 1\n  if (layer === \"bottom\") return layerCount\n\n  const innerLayerMatch = layer.match(/^inner([1-6])$/)\n  if (innerLayerMatch) {\n    const innerLayerNumber = Number(innerLayerMatch[1])\n    if (innerLayerNumber >= 1 && innerLayerNumber <= layerCount - 2) {\n      return innerLayerNumber + 1\n    }\n  }\n\n  throw new Error(`Invalid layer \"${layer}\" for ${layerCount}-layer board`)\n}\n\nconst normalizeLayerSpan = (\n  span: DrillLayerSpan,\n  layerCount: number,\n): DrillLayerSpan => {\n  const fromLayerNumber = getLayerNumber(span.from_layer, layerCount)\n  const toLayerNumber = getLayerNumber(span.to_layer, layerCount)\n\n  if (fromLayerNumber <= toLayerNumber) {\n    return span\n  }\n\n  return {\n    from_layer: span.to_layer,\n    to_layer: span.from_layer,\n  }\n}\n\nconst getPlatedElementLayerSpan = (\n  element: AnyCircuitElement,\n  layerCount: number,\n): DrillLayerSpan | undefined => {\n  if (element.type !== \"pcb_plated_hole\" && element.type !== \"pcb_via\") {\n    return undefined\n  }\n\n  if (\n    \"from_layer\" in element &&\n    typeof element.from_layer === \"string\" &&\n    \"to_layer\" in element &&\n    typeof element.to_layer === \"string\"\n  ) {\n    return normalizeLayerSpan(\n      {\n        from_layer: element.from_layer as LayerRef,\n        to_layer: element.to_layer as LayerRef,\n      },\n      layerCount,\n    )\n  }\n\n  let layers: LayerRef[] = []\n  if (\"layers\" in element && Array.isArray(element.layers)) {\n    layers = element.layers as LayerRef[]\n  }\n  if (layers.length > 0) {\n    const sortedLayers = [...layers].sort(\n      (a, b) => getLayerNumber(a, layerCount) - getLayerNumber(b, layerCount),\n    )\n    return {\n      from_layer: sortedLayers[0],\n      to_layer: sortedLayers[sortedLayers.length - 1],\n    }\n  }\n\n  return {\n    from_layer: \"top\",\n    to_layer: \"bottom\",\n  }\n}\n\nconst getDefaultPlatedDrillLayerSpan = (): DrillLayerSpan => ({\n  from_layer: \"top\",\n  to_layer: \"bottom\",\n})\n\nconst getRequestedLayerSpan = (layer_span?: DrillLayerSpan) => {\n  if (layer_span) {\n    return layer_span\n  }\n  return getDefaultPlatedDrillLayerSpan()\n}\n\nconst isSameLayerSpan = (\n  a: DrillLayerSpan,\n  b: DrillLayerSpan,\n  layerCount: number,\n) => {\n  const normalizedA = normalizeLayerSpan(a, layerCount)\n  const normalizedB = normalizeLayerSpan(b, layerCount)\n  return (\n    normalizedA.from_layer === normalizedB.from_layer &&\n    normalizedA.to_layer === normalizedB.to_layer\n  )\n}\n\nconst shouldIncludeElement = ({\n  element,\n  is_plated,\n  layer_span,\n  layerCount,\n}: {\n  element: AnyCircuitElement\n  is_plated: boolean\n  layer_span?: DrillLayerSpan\n  layerCount: number\n}) => {\n  if (\n    element.type !== \"pcb_plated_hole\" &&\n    element.type !== \"pcb_hole\" &&\n    element.type !== \"pcb_via\"\n  ) {\n    return false\n  }\n\n  if (!is_plated) return element.type === \"pcb_hole\"\n  if (element.type === \"pcb_hole\") return false\n\n  const elementLayerSpan = getPlatedElementLayerSpan(element, layerCount)\n  if (!elementLayerSpan) return false\n  const requestedLayerSpan = getRequestedLayerSpan(layer_span)\n\n  return isSameLayerSpan(elementLayerSpan, requestedLayerSpan, layerCount)\n}\n\nconst getFileFunctionLayerSpan = ({\n  circuitJson,\n  is_plated,\n  layer_span,\n}: {\n  circuitJson: Array<AnyCircuitElement>\n  is_plated: boolean\n  layer_span?: DrillLayerSpan\n}) => {\n  const layerCount = getLayerCount(circuitJson)\n  if (!is_plated) return `NonPlated,1,${layerCount},NPTH`\n\n  const requestedLayerSpan = getRequestedLayerSpan(layer_span)\n  const span = normalizeLayerSpan(requestedLayerSpan, layerCount)\n  return `Plated,${getLayerNumber(span.from_layer, layerCount)},${getLayerNumber(span.to_layer, layerCount)},PTH`\n}\n\nconst getTraceRouteViaElements = (\n  circuitJson: Array<AnyCircuitElement>,\n): Array<AnyCircuitElement> => {\n  const routeVias: Array<AnyCircuitElement> = []\n\n  for (const element of circuitJson) {\n    if (element.type !== \"pcb_trace\") {\n      continue\n    }\n\n    for (const [index, point] of element.route.entries()) {\n      if (\n        point.route_type !== \"via\" ||\n        typeof point.hole_diameter !== \"number\" ||\n        typeof point.outer_diameter !== \"number\"\n      ) {\n        continue\n      }\n\n      routeVias.push({\n        type: \"pcb_via\",\n        pcb_via_id: `${element.pcb_trace_id}_route_via_${index}`,\n        x: point.x,\n        y: point.y,\n        hole_diameter: point.hole_diameter,\n        outer_diameter: point.outer_diameter,\n        from_layer: point.from_layer,\n        to_layer: point.to_layer,\n        layers: [point.from_layer, point.to_layer],\n      })\n    }\n  }\n\n  return routeVias\n}\n\nconst getDrillableElements = (circuitJson: Array<AnyCircuitElement>) => [\n  ...circuitJson,\n  ...getTraceRouteViaElements(circuitJson),\n]\n\nexport const convertSoupToExcellonDrillCommands = ({\n  circuitJson,\n  is_plated,\n  flip_y_axis = false,\n  layer_span,\n}: {\n  circuitJson: Array<AnyCircuitElement>\n  is_plated: boolean\n  flip_y_axis?: boolean\n  layer_span?: DrillLayerSpan\n}): Array<AnyExcellonDrillCommand> => {\n  const builder = excellonDrill()\n  const layerCount = getLayerCount(circuitJson)\n  const drillableElements = getDrillableElements(circuitJson)\n\n  // Start sequence commands\n  builder.add(\"M48\", {})\n\n  // Add header comments\n  const date_str = new Date().toISOString()\n  builder\n    .add(\"header_comment\", {\n      text: `DRILL file {tscircuit} date ${date_str}`,\n    })\n    .add(\"header_comment\", {\n      text: \"FORMAT={-:-/ absolute / metric / decimal}\",\n    })\n    .add(\"header_attribute\", {\n      attribute_name: \"TF.CreationDate\",\n      attribute_value: date_str,\n    })\n    .add(\"header_attribute\", {\n      attribute_name: \"TF.GenerationSoftware\",\n      attribute_value: \"tscircuit\",\n    })\n    .add(\"header_attribute\", {\n      attribute_name: \"TF.FileFunction\",\n      attribute_value: getFileFunctionLayerSpan({\n        circuitJson,\n        is_plated,\n        layer_span,\n      }),\n    })\n    .add(\"FMAT\", { format: 2 }) // Assuming format 2 for the example\n    .add(\"unit_format\", { unit: \"METRIC\", lz: null })\n\n  let tool_counter = 10 // Start tool numbering from 10 for example\n\n  const diameterToToolNumber: Record<number, number> = {}\n\n  // Define tools\n  for (const element of drillableElements) {\n    if (\n      !shouldIncludeElement({\n        element,\n        is_plated,\n        layer_span,\n        layerCount,\n      })\n    ) {\n      continue\n    }\n\n    const holeDiameter =\n      \"hole_diameter\" in element && typeof element.hole_diameter === \"number\"\n        ? element.hole_diameter\n        : \"hole_width\" in element &&\n            typeof element.hole_width === \"number\" &&\n            \"hole_height\" in element &&\n            typeof element.hole_height === \"number\"\n          ? Math.min(element.hole_width, element.hole_height)\n          : undefined\n\n    if (!holeDiameter) continue\n\n    if (!diameterToToolNumber[holeDiameter]) {\n      builder.add(\"aper_function_header\", {\n        is_plated,\n      })\n      builder.add(\"define_tool\", {\n        tool_number: tool_counter,\n        diameter: holeDiameter,\n      })\n      diameterToToolNumber[holeDiameter] = tool_counter\n      tool_counter++\n    }\n  }\n\n  builder.add(\"percent_sign\", {})\n  builder.add(\"G90\", {})\n  builder.add(\"G05\", {})\n\n  // --------------------\n  // Execute drills/slots\n  // --------------------\n  for (let i = 10; i < tool_counter; i++) {\n    builder.add(\"use_tool\", { tool_number: i })\n    for (const element of drillableElements) {\n      if (\n        element.type === \"pcb_plated_hole\" ||\n        element.type === \"pcb_hole\" ||\n        element.type === \"pcb_via\"\n      ) {\n        if (\n          !shouldIncludeElement({\n            element,\n            is_plated,\n            layer_span,\n            layerCount,\n          })\n        ) {\n          continue\n        }\n\n        const holeDiameter =\n          \"hole_diameter\" in element &&\n          typeof element.hole_diameter === \"number\"\n            ? element.hole_diameter\n            : \"hole_width\" in element &&\n                typeof element.hole_width === \"number\" &&\n                \"hole_height\" in element &&\n                typeof element.hole_height === \"number\"\n              ? Math.min(element.hole_width, element.hole_height)\n              : undefined\n\n        if (!holeDiameter || diameterToToolNumber[holeDiameter] !== i) {\n          continue\n        }\n\n        const elementX =\n          \"x\" in element && typeof element.x === \"number\" ? element.x : 0\n        const elementY =\n          \"y\" in element && typeof element.y === \"number\" ? element.y : 0\n        const offsetX =\n          \"hole_offset_x\" in element &&\n          typeof element.hole_offset_x === \"number\"\n            ? element.hole_offset_x\n            : 0\n        const offsetY =\n          \"hole_offset_y\" in element &&\n          typeof element.hole_offset_y === \"number\"\n            ? element.hole_offset_y\n            : 0\n        const centerX = elementX + offsetX\n        const centerY = elementY + offsetY\n        const yMultiplier = flip_y_axis ? -1 : 1\n\n        if (\n          \"hole_width\" in element &&\n          typeof element.hole_width === \"number\" &&\n          \"hole_height\" in element &&\n          typeof element.hole_height === \"number\"\n        ) {\n          const holeWidth = element.hole_width\n          const holeHeight = element.hole_height\n          const maxDim = Math.max(holeWidth, holeHeight)\n          const minDim = Math.min(holeWidth, holeHeight)\n\n          if (Math.abs(maxDim - minDim) <= 1e-6) {\n            builder.add(\"drill_at\", {\n              x: centerX,\n              y: centerY * yMultiplier,\n            })\n            continue\n          }\n\n          const rotationDegrees =\n            \"hole_ccw_rotation\" in element &&\n            typeof element.hole_ccw_rotation === \"number\"\n              ? element.hole_ccw_rotation\n              : \"ccw_rotation\" in element &&\n                  typeof element.ccw_rotation === \"number\"\n                ? element.ccw_rotation\n                : 0\n          const rotationRadians = (rotationDegrees * Math.PI) / 180\n          const cosTheta = Math.cos(rotationRadians)\n          const sinTheta = Math.sin(rotationRadians)\n\n          const isWidthMajor = holeWidth >= holeHeight\n          const slotHalfLength = (maxDim - minDim) / 2\n          const startRelative = isWidthMajor\n            ? { x: -slotHalfLength, y: 0 }\n            : { x: 0, y: -slotHalfLength }\n          const endRelative = isWidthMajor\n            ? { x: slotHalfLength, y: 0 }\n            : { x: 0, y: slotHalfLength }\n\n          const rotatePoint = ({ x, y }: { x: number; y: number }) => ({\n            x: x * cosTheta - y * sinTheta,\n            y: x * sinTheta + y * cosTheta,\n          })\n\n          const startPoint = rotatePoint(startRelative)\n          const endPoint = rotatePoint(endRelative)\n\n          const startX = centerX + startPoint.x\n          const startY = (centerY + startPoint.y) * yMultiplier\n          const endX = centerX + endPoint.x\n          const endY = (centerY + endPoint.y) * yMultiplier\n\n          builder\n            .add(\"drill_at\", {\n              x: startX,\n              y: startY,\n            })\n            .add(\"G85\", {\n              x: endX,\n              y: endY,\n              width: minDim,\n            })\n          continue\n        }\n\n        builder.add(\"drill_at\", {\n          x: centerX,\n          y: centerY * yMultiplier,\n        })\n      }\n    }\n  }\n\n  builder.add(\"M30\", {})\n\n  return builder.build()\n}\n\nconst getDrillLayerSpanKey = (span: DrillLayerSpan, layerCount: number) => {\n  const normalizedSpan = normalizeLayerSpan(span, layerCount)\n  return `L${getLayerNumber(normalizedSpan.from_layer, layerCount)}-L${getLayerNumber(normalizedSpan.to_layer, layerCount)}`\n}\n\nconst hasDrillGeometry = (element: AnyCircuitElement) => {\n  if (\"hole_diameter\" in element && typeof element.hole_diameter === \"number\") {\n    return true\n  }\n\n  return (\n    \"hole_width\" in element &&\n    typeof element.hole_width === \"number\" &&\n    \"hole_height\" in element &&\n    typeof element.hole_height === \"number\"\n  )\n}\n\nexport const convertSoupToExcellonDrillCommandLayers = ({\n  circuitJson,\n  flip_y_axis = false,\n}: {\n  circuitJson: Array<AnyCircuitElement>\n  flip_y_axis?: boolean\n}): Record<string, Array<AnyExcellonDrillCommand>> => {\n  const layerCount = getLayerCount(circuitJson)\n  const platedSpans = new Map(\n    getDrillableElements(circuitJson).flatMap(\n      (element): Array<[string, DrillLayerSpan]> => {\n        const span = getPlatedElementLayerSpan(element, layerCount)\n        if (!span) {\n          return []\n        }\n        return [[getDrillLayerSpanKey(span, layerCount), span]]\n      },\n    ),\n  )\n  const platedDrillLayers = Object.fromEntries(\n    [...platedSpans.entries()].sort().map(([spanKey, span]) => [\n      `drill-${spanKey}.drl`,\n      convertSoupToExcellonDrillCommands({\n        circuitJson,\n        is_plated: true,\n        flip_y_axis,\n        layer_span: span,\n      }),\n    ]),\n  )\n  const hasNonPlatedDrill = circuitJson.some((element) => {\n    if (element.type !== \"pcb_hole\") {\n      return false\n    }\n\n    return hasDrillGeometry(element)\n  })\n\n  if (!hasNonPlatedDrill) {\n    return platedDrillLayers\n  }\n\n  return {\n    ...platedDrillLayers,\n    \"drill_npth.drl\": convertSoupToExcellonDrillCommands({\n      circuitJson,\n      is_plated: false,\n      flip_y_axis,\n    }),\n  }\n}\n","import { z } from \"zod\"\nimport { defineGerberCommand } from \"../define-gerber-command\"\n\nexport const add_attribute_on_aperture = defineGerberCommand({\n  command_code: \"TA\",\n  schema: z\n    .object({\n      command_code: z.literal(\"TA\").default(\"TA\"),\n      attribute_name: z.string(),\n      attribute_value: z.string(),\n    })\n    .describe(\n      \"Add attribute on aperture: Add an aperture attribute to the dictionary or modify it.\",\n    ),\n  stringify: ({ attribute_name, attribute_value }) => {\n    return `%TA${attribute_name},${attribute_value}*%`\n  },\n})\n","import type { AnyZodObject, z, ZodObject, ZodUnion } from \"zod\"\n\nexport interface GerberCommandDef<\n  K extends string,\n  T extends AnyZodObject | z.ZodIntersection<any, any>,\n> {\n  command_code: K\n  schema: T\n  stringify: (c: z.infer<T>) => string\n}\n\nexport const defineGerberCommand = <\n  K extends string,\n  T extends AnyZodObject | z.ZodIntersection<any, any>,\n>({\n  command_code,\n  schema,\n  stringify,\n}: {\n  command_code: K\n  schema: T\n  stringify: (c: z.infer<T>) => string\n}): GerberCommandDef<K, T> => {\n  return {\n    command_code,\n    schema,\n    stringify,\n  }\n}\n","import { z } from \"zod\"\nimport { defineGerberCommand } from \"../define-gerber-command\"\n\nexport const add_attribute_on_file = defineGerberCommand({\n  command_code: \"TF\",\n  schema: z\n    .object({\n      command_code: z.literal(\"TF\").default(\"TF\"),\n      attribute_name: z.string(),\n      attribute_value: z.string(),\n    })\n    .describe(\"Add attribute on file: Set a file attribute.\"),\n  stringify: ({ attribute_name, attribute_value }) => {\n    return `%TF.${attribute_name},${attribute_value}*%`\n  },\n})\n","import { z } from \"zod\"\nimport { defineGerberCommand } from \"../define-gerber-command\"\n\nexport const add_attribute_on_object = defineGerberCommand({\n  command_code: \"TO\",\n  schema: z\n    .object({\n      command_code: z.literal(\"TO\").default(\"TO\"),\n      attribute_name: z.string(),\n      attribute_value: z.string(),\n    })\n    .describe(\n      \"Add attribute on object: Add an object attribute to the dictionary or modify it.\",\n    ),\n  stringify: ({ attribute_name, attribute_value }) => {\n    return `%TO${attribute_name},${attribute_value}*%`\n  },\n})\n\nexport type AddAttributeOnObject = z.infer<\n  typeof add_attribute_on_object.schema\n>\n","import { z } from \"zod\"\nimport { defineGerberCommand } from \"../define-gerber-command\"\n\nexport const aperture_block = defineGerberCommand({\n  command_code: \"AB\",\n  schema: z\n    .object({\n      command_code: z.literal(\"AB\").default(\"AB\"),\n      block: z.string(),\n    })\n    .describe(\n      \"Aperture block: Opens a block aperture statement and assigns its aperture number or closes a block aperture statement\",\n    ),\n  stringify() {\n    return \"\"\n  },\n})\n\nexport type ApertureBlock = z.infer<typeof aperture_block.schema>\n","import { z } from \"zod\"\nimport { defineGerberCommand } from \"../define-gerber-command\"\n\nexport const comment = defineGerberCommand({\n  command_code: \"G04\",\n  schema: z\n    .object({\n      command_code: z.literal(\"G04\").default(\"G04\"),\n      comment: z.string(),\n    })\n    .describe(\n      \"Comment: A human readable comment, does not affect the image. 4.1\",\n    ),\n  stringify: (c) => {\n    return `G04 ${c.comment}*`\n  },\n})\n\nexport type Comment = z.infer<typeof comment.schema>\n","import { z } from \"zod\"\nimport { defineGerberCommand } from \"../define-gerber-command\"\n\nexport const create_arc = defineGerberCommand({\n  command_code: \"G75\",\n  schema: z\n    .object({\n      command_code: z.literal(\"G75\").default(\"G75\"),\n    })\n    .describe(\n      \"Create arc: A G75 must be called before creating the first arc.\",\n    ),\n  stringify() {\n    return \"G75*\"\n  },\n})\n\nexport type CreateArc = z.infer<typeof create_arc.schema>\n","import { z } from \"zod\"\nimport { defineGerberCommand } from \"../define-gerber-command\"\n\nexport const define_aperture = defineGerberCommand({\n  command_code: \"AD\",\n  schema: z\n    .object({\n      command_code: z.literal(\"AD\").default(\"AD\"),\n      aperture_code: z.string(),\n    })\n    .describe(\n      \"Aperture define: Defines a template-based aperture, assigns a D code to it. 4.3\",\n    ),\n  stringify() {\n    return \"\"\n  },\n})\n\nexport type DefineAperture = z.infer<typeof define_aperture.schema>\n","import { z } from \"zod\"\nimport { defineGerberCommand } from \"../define-gerber-command\"\n\nexport const define_macro_aperture_template = defineGerberCommand({\n  command_code: \"AM\",\n  schema: z\n    .object({\n      command_code: z.literal(\"AM\").default(\"AM\"),\n      macro_name: z.string(),\n      template_code: z.string(),\n    })\n    .describe(\"Aperture macro: Defines a macro aperture template. 4.5\"),\n  stringify({ macro_name, template_code }) {\n    return `%AM${macro_name}*\\n${template_code}%`\n  },\n})\n\nexport type DefineMacroApertureTemplate = z.infer<\n  typeof define_macro_aperture_template.schema\n>\n","import { z } from \"zod\"\nimport { defineGerberCommand } from \"../define-gerber-command\"\n\nexport const delete_attribute = defineGerberCommand({\n  command_code: \"TD\",\n  schema: z\n    .object({\n      command_code: z.literal(\"TD\").default(\"TD\"),\n      attribute: z.string().optional(),\n    })\n    .describe(\n      \"Delete attribute: Attribute delete Delete one or all attributes in the dictionary.\",\n    ),\n  stringify({ attribute }) {\n    if (!attribute) {\n      return \"%TD*%\"\n    }\n    return `%TD${attribute}*%`\n  },\n})\n","import { z } from \"zod\"\nimport { defineGerberCommand } from \"../define-gerber-command\"\n\nexport const end_of_file = defineGerberCommand({\n  command_code: \"M02\",\n  schema: z\n    .object({\n      command_code: z.literal(\"M02\").default(\"M02\"),\n    })\n    .describe(\"End of file: 4.13\"),\n  stringify() {\n    return \"M02*\"\n  },\n})\n","import { z } from \"zod\"\nimport { defineGerberCommand } from \"../define-gerber-command\"\n\nexport const end_region_statement = defineGerberCommand({\n  command_code: \"G37\",\n  schema: z\n    .object({\n      command_code: z.literal(\"G37\").default(\"G37\"),\n    })\n    .describe(\"End region statement: Ends the region statement\"),\n  stringify() {\n    return \"G37*\"\n  },\n})\n\nexport type EndRegionStatement = z.infer<typeof end_region_statement.schema>\n","import { z } from \"zod\"\nimport { defineGerberCommand } from \"../define-gerber-command\"\nimport { getGerberCoordinateWithPadding } from \"../stringify-gerber/get-gerber-coordinate-with-padding\"\n\nexport const flash_operation = defineGerberCommand({\n  command_code: \"D03\",\n  schema: z\n    .object({\n      command_code: z.literal(\"D03\").default(\"D03\"),\n      x: z.number(),\n      y: z.number(),\n    })\n    .describe(\n      \"Flash operation: Creates a flash object with the current aperture. The current point is moved to the flash point.\",\n    ),\n  stringify({ x, y }) {\n    const [gx, gy] = [x, y].map((coord) =>\n      getGerberCoordinateWithPadding(coord),\n    )\n    return `X${gx}Y${gy}D03*`\n  },\n})\n\nexport type FlashOperation = z.infer<typeof flash_operation.schema>\n","/**\n * Retrieves the Gerber coordinate with padding.\n *\n * Example Gerber coordinate strings:\n * full string: X110550000Y-85000000D03*\n * formatted coordinate for X: 110550000\n *\n * Example inputs/outputs:\n * input: 110.55\n * output: 110550000\n *\n * @param coordinate_mm - The coordinate value in millimeters.\n * @returns The Gerber coordinate with padding.\n */\nexport const getGerberCoordinateWithPadding = (\n  coordinate_mm: number,\n): string => {\n  const coordinate_um = coordinate_mm * 1000000 // Convert millimeters to micrometers\n  let coordinate_str = coordinate_um.toFixed(0) // Convert to string without decimal places\n  // add left padding\n  while (coordinate_str.length < 9) {\n    if (coordinate_um < 0) {\n      coordinate_str = `-0${coordinate_str.slice(1)}`\n    } else {\n      coordinate_str = `0${coordinate_str}`\n    }\n  }\n  return coordinate_str\n}\n","import { z } from \"zod\"\n\nexport const load_mirroring = z\n  .object({\n    command_code: z.literal(\"LM\"),\n    mirroring: z.string(),\n  })\n  .describe(\"Load mirroring: Loads the mirror object transformation parameter.\")\n\nexport type LoadMirroring = z.infer<typeof load_mirroring>\n","import { z } from \"zod\"\n\nexport const load_polarity = z\n  .object({\n    command_code: z.literal(\"LP\"),\n    polarity: z.string(),\n  })\n  .describe(\n    \"Load polarity: Loads the polarity object transformation parameter.\",\n  )\n\nexport type LoadPolarity = z.infer<typeof load_polarity>\n","import { z } from \"zod\"\nimport { defineGerberCommand } from \"../define-gerber-command\"\n\nexport const load_rotation = defineGerberCommand({\n  command_code: \"LR\",\n  schema: z\n    .object({\n      command_code: z.literal(\"LR\").default(\"LR\"),\n      rotation_degrees: z.number(),\n    })\n    .describe(\n      \"Load rotation: Loads the rotation object transformation parameter.\",\n    ),\n  stringify: ({ rotation_degrees }) => {\n    return `%LR${rotation_degrees}*%`\n  },\n})\n\nexport type LoadRotation = z.infer<typeof load_rotation.schema>\n","import { z } from \"zod\"\n\nexport const load_scaling = z\n  .object({\n    command_code: z.literal(\"LS\"),\n    scaling: z.string(),\n  })\n  .describe(\"Load scaling: Loads the scale object transformation parameter.\")\n\nexport type LoadScaling = z.infer<typeof load_scaling>\n","import { getGerberCoordinateWithPadding } from \"./../stringify-gerber/get-gerber-coordinate-with-padding\"\nimport { z } from \"zod\"\nimport { defineGerberCommand } from \"../define-gerber-command\"\n\nexport const move_operation = defineGerberCommand({\n  command_code: \"D02\",\n  schema: z\n    .object({\n      command_code: z.literal(\"D02\").default(\"D02\"),\n      x: z.number(),\n      y: z.number(),\n    })\n    .describe(\n      \"Move operation: D02 moves the current point to the coordinate in the command. It does not create an object.\",\n    ),\n  stringify({ x, y }) {\n    const [gx, gy] = [x, y].map((coord) =>\n      getGerberCoordinateWithPadding(coord),\n    )\n    return `X${gx}Y${gy}D02*`\n  },\n})\n","import { z } from \"zod\"\nimport { defineGerberCommand } from \"../define-gerber-command\"\nimport { getGerberCoordinateWithPadding } from \"../stringify-gerber/get-gerber-coordinate-with-padding\"\n\nexport const plot_operation = defineGerberCommand({\n  command_code: \"D01\",\n  schema: z\n    .object({\n      command_code: z.literal(\"D01\").default(\"D01\"),\n      x: z.number(),\n      y: z.number(),\n      i: z.number().optional(),\n      j: z.number().optional(),\n    })\n    .describe(\n      \"Plot operation: Outside a region statement D01 creates a draw or arc object with the current aperture. Inside it adds a draw/arc segment to the contour under construction. The current point is moved to draw/arc end point after the creation of the draw/arc.\",\n    ),\n  stringify({ x, y, i, j }) {\n    const gx = getGerberCoordinateWithPadding(x)\n    const gy = getGerberCoordinateWithPadding(y)\n    let cmd = `X${gx}Y${gy}`\n    if (i !== undefined && j !== undefined) {\n      const gi = getGerberCoordinateWithPadding(i)\n      const gj = getGerberCoordinateWithPadding(j)\n      cmd += `I${gi}J${gj}`\n    }\n    return `${cmd}D01*`\n  },\n})\n","import { z } from \"zod\"\n\nexport const set_coordinate_format = z\n  .object({\n    command_code: z.literal(\"FS\"),\n    format: z.string(),\n  })\n  .describe(\"Sets the coordinate format, e.g. the number of decimals.\")\nexport type SetCoordinateFormat = z.infer<typeof set_coordinate_format>\n","import { z } from \"zod\"\n\nexport const set_current_aperture_d_code = z\n  .object({\n    command_code: z.literal(\"Dnn\"),\n    d_code: z.string(),\n  })\n  .describe(\"(nn≥10) Sets the current aperture to D code nn. 4.6\")\n\nexport type SetCurrentApertureDCode = z.infer<\n  typeof set_current_aperture_d_code\n>\n","import { z } from \"zod\"\nimport { defineGerberCommand } from \"../define-gerber-command\"\n\nexport const set_movement_mode_to_clockwise_circular = defineGerberCommand({\n  command_code: \"G02\",\n  schema: z\n    .object({\n      command_code: z.literal(\"G02\").default(\"G02\"),\n    })\n    .describe(\n      \"Set movement mode to clockwise circular: Sets linear/circular mode to clockwise circular.\",\n    ),\n  stringify() {\n    return \"G02*\"\n  },\n})\n","import { z } from \"zod\"\nimport { defineGerberCommand } from \"../define-gerber-command\"\n\nexport const set_movement_mode_to_counterclockwise_circular =\n  defineGerberCommand({\n    command_code: \"G03\", // Add the missing command_code property\n    schema: z\n      .object({\n        command_code: z.literal(\"G03\").default(\"G03\"),\n      })\n      .describe(\n        \"Set movement mode to counterclockwise circular: Sets linear/circular mode to counterclockwise circular.\",\n      ),\n    stringify() {\n      return \"G03*\"\n    },\n  })\n","import { z } from \"zod\"\nimport { defineGerberCommand } from \"../define-gerber-command\"\n\nexport const set_movement_mode_to_linear = defineGerberCommand({\n  command_code: \"G01\",\n  schema: z\n    .object({\n      command_code: z.literal(\"G01\").default(\"G01\"),\n    })\n    .describe(\n      \"Set movement mode to linear: Sets linear/circular mode to linear.\",\n    ),\n  stringify() {\n    return \"G01*\"\n  },\n})\n","import { z } from \"zod\"\nimport { defineGerberCommand } from \"../define-gerber-command\"\n\nexport const set_unit = defineGerberCommand({\n  command_code: \"MO\",\n  schema: z\n    .object({\n      command_code: z.literal(\"MO\").default(\"MO\"),\n      unit: z.enum([\"MM\", \"in\"]),\n    })\n    .describe(\"Mode: Sets the unit to mm or inch. 4.2.1\"),\n  stringify({ unit }) {\n    return `%MO${unit}*%`\n  },\n})\n","import { z } from \"zod\"\nimport { defineGerberCommand } from \"../define-gerber-command\"\n\nexport const start_region_statement = defineGerberCommand({\n  command_code: \"G36\",\n  schema: z\n    .object({\n      command_code: z.literal(\"G36\").default(\"G36\"),\n    })\n    .describe(\n      \"Start region statement: Starts a region statement which creates a region by defining its contours.\",\n    ),\n  stringify() {\n    return \"G36*\"\n  },\n})\n\nexport type StartRegionStatement = z.infer<typeof start_region_statement.schema>\n","import { z } from \"zod\"\n\nexport const step_and_repeat = z\n  .object({\n    command_code: z.literal(\"SR\"),\n    statement: z.string(),\n  })\n  .describe(\"Step and repeat: Open or closes a step and repeat statement.\")\n\nexport type StepAndRepeat = z.infer<typeof step_and_repeat>\n","import { z } from \"zod\"\nimport { defineGerberCommand } from \"../define-gerber-command\"\n\nexport const format_specification = defineGerberCommand({\n  command_code: \"FS\",\n  schema: z.object({\n    command_code: z.literal(\"FS\").default(\"FS\"),\n    zero_omission_mode: z\n      .union([z.literal(\"L\").describe(\"leading zeros omitted\"), z.literal(\"T\")])\n      .nullable()\n      .default(null),\n    coordinate_notation: z\n      .union([\n        z.literal(\"A\").describe(\"absolute notation\"),\n        z.literal(\"I\").describe(\"incremental notation\"),\n      ])\n      .default(\"A\"),\n    x_integer_digits: z.number().int().default(4),\n    x_decimal_digits: z.number().int().default(6),\n    y_integer_digits: z.number().int().default(4),\n    y_decimal_digits: z.number().int().default(6),\n  }),\n  stringify: () => {\n    return \"%FSLAX46Y46*%\"\n  },\n})\n\nexport type FormatSpecification = z.infer<typeof format_specification.schema>\n","import { z } from \"zod\"\nimport { defineGerberCommand } from \"../define-gerber-command\"\n\nexport const set_layer_polarity = defineGerberCommand({\n  command_code: \"LP\",\n  schema: z\n    .object({\n      command_code: z.literal(\"LP\").default(\"LP\"),\n      polarity: z.enum([\"D\", \"C\"]),\n    })\n    .describe(\n      \"Layer Polarity: Sets the layer polarity to dark or clear. 4.2.1\",\n    ),\n  stringify({ polarity }) {\n    return `%LP${polarity}*%`\n  },\n})\n","import { z } from \"zod\"\nimport { defineGerberCommand } from \"../define-gerber-command\"\nimport { getGerberCoordinateWithPadding } from \"../stringify-gerber/get-gerber-coordinate-with-padding\"\n\nconst circle_template = z.object({\n  standard_template_code: z.literal(\"C\").describe(\"circle\"),\n  diameter: z.number(),\n  hole_diameter: z.number().optional(),\n})\n\nconst rectangle_template = z.object({\n  standard_template_code: z.literal(\"R\").describe(\"rectangle\"),\n  x_size: z.number(),\n  y_size: z.number(),\n  hole_diameter: z.number().optional(),\n})\n\nconst obround_template = z.object({\n  standard_template_code: z.literal(\"O\").describe(\"obround\"),\n  x_size: z.number(),\n  y_size: z.number(),\n  hole_diameter: z.number().optional(),\n})\n\nconst polygon_template = z.object({\n  standard_template_code: z.literal(\"P\").describe(\"polygon\"),\n  outer_diameter: z.number(),\n  number_of_vertices: z.number().int(),\n  rotation: z.number().optional(),\n  hole_diameter: z.number().optional(),\n})\n\nconst standard_aperture_template_config = z.discriminatedUnion(\n  \"standard_template_code\",\n  [circle_template, rectangle_template, obround_template, polygon_template],\n)\n\nconst horz_pill_template = z.object({\n  macro_name: z.literal(\"HORZPILL\"),\n  x_size: z.number(),\n  y_size: z.number(),\n  circle_diameter: z.number(),\n  circle_center_offset: z.number(),\n})\n\nconst vert_pill_template = z.object({\n  macro_name: z.literal(\"VERTPILL\"),\n  x_size: z.number(),\n  y_size: z.number(),\n  circle_diameter: z.number(),\n  circle_center_offset: z.number(),\n})\n\nconst roundrect_template = z.object({\n  macro_name: z.literal(\"ROUNDRECT\"),\n  corner_radius: z.number(),\n  corner_1_x: z.number(),\n  corner_1_y: z.number(),\n  corner_2_x: z.number(),\n  corner_2_y: z.number(),\n  corner_3_x: z.number(),\n  corner_3_y: z.number(),\n  corner_4_x: z.number(),\n  corner_4_y: z.number(),\n})\n\nconst macro_aperture_template_config = z.discriminatedUnion(\"macro_name\", [\n  horz_pill_template,\n  vert_pill_template,\n  roundrect_template,\n])\n\nconst aperture_template_config = z.union([\n  standard_aperture_template_config,\n  macro_aperture_template_config,\n])\n\nexport const define_aperture_template = defineGerberCommand({\n  command_code: \"ADD\",\n  schema: aperture_template_config.and(\n    z.object({\n      command_code: z.literal(\"ADD\").default(\"ADD\"),\n      aperture_number: z.number().int(),\n    }),\n  ),\n  stringify(props) {\n    if (\"macro_name\" in props) {\n      const { aperture_number, macro_name } = props\n      let commandString = `%ADD${aperture_number}${macro_name},`\n\n      if (macro_name === \"HORZPILL\" || macro_name === \"VERTPILL\") {\n        commandString += `${props.x_size.toFixed(6)}X${props.y_size.toFixed(6)}X${props.circle_diameter.toFixed(6)}X${props.circle_center_offset.toFixed(6)}`\n      } else if (macro_name === \"ROUNDRECT\") {\n        // Handle ROUNDRECT if needed\n        throw new Error(\"ROUNDRECT macro not implemented yet\")\n      }\n\n      commandString += \"*%\"\n      return commandString\n    }\n    if (\"standard_template_code\" in props) {\n      const { aperture_number, standard_template_code } = props\n      let commandString = `%ADD${aperture_number}${standard_template_code},`\n\n      if (standard_template_code === \"C\") {\n        commandString += `${props.diameter.toFixed(6)}`\n      } else if (\n        standard_template_code === \"R\" ||\n        standard_template_code === \"O\"\n      ) {\n        commandString += `${props.x_size.toFixed(6)}X${props.y_size.toFixed(6)}`\n      } else if (standard_template_code === \"P\") {\n        commandString += `${props.outer_diameter}X${props.number_of_vertices}X${\n          props.rotation ? `X${props.rotation}` : \"\"\n        }`\n      }\n\n      if (props.hole_diameter) {\n        commandString += `X${props.hole_diameter.toFixed(6)}`\n      }\n\n      commandString += \"*%\"\n\n      return commandString\n    }\n    throw new Error(\n      `Invalid aperture template config: ${JSON.stringify(props)}`,\n    )\n  },\n})\n\nexport type DefineAperatureTemplateCommand = z.infer<\n  typeof define_aperture_template.schema\n>\n\nexport type ApertureTemplateConfig = z.infer<typeof aperture_template_config>\n","import { z } from \"zod\"\nimport { defineGerberCommand } from \"../define-gerber-command\"\n\nexport const select_aperture = defineGerberCommand({\n  command_code: \"D\",\n  schema: z.object({\n    command_code: z.literal(\"D\").default(\"D\"),\n    aperture_number: z.number().int(),\n  }),\n  stringify({ aperture_number }) {\n    return `D${aperture_number}*`\n  },\n})\n","import type { GerberCommandDef } from \"./define-gerber-command\"\nimport type { z } from \"zod\"\n\nimport { add_attribute_on_aperture } from \"./commands/add_attribute_on_aperture\"\nimport { add_attribute_on_file } from \"./commands/add_attribute_on_file\"\nimport { add_attribute_on_object } from \"./commands/add_attribute_on_object\"\nimport { aperture_block } from \"./commands/aperture_block\"\nimport { comment } from \"./commands/comment\"\nimport { create_arc } from \"./commands/create_arc\"\nimport { define_aperture } from \"./commands/define_aperture\"\nimport { define_macro_aperture_template } from \"./commands/define_macro_aperture_template\"\nimport { delete_attribute } from \"./commands/delete_attribute\"\nimport { end_of_file } from \"./commands/end_of_file\"\nimport { end_region_statement } from \"./commands/end_region_statement\"\nimport { flash_operation } from \"./commands/flash_operation\"\nimport { load_mirroring } from \"./commands/load_mirroring\"\nimport { load_polarity } from \"./commands/load_polarity\"\nimport { load_rotation } from \"./commands/load_rotation\"\nimport { load_scaling } from \"./commands/load_scaling\"\nimport { move_operation } from \"./commands/move_operation\"\nimport { plot_operation } from \"./commands/plot_operation\"\nimport { set_coordinate_format } from \"./commands/set_coordinate_format\"\nimport { set_current_aperture_d_code } from \"./commands/set_current_aperture_d_code\"\nimport { set_movement_mode_to_clockwise_circular } from \"./commands/set_movement_mode_to_clockwise_circular\"\nimport { set_movement_mode_to_counterclockwise_circular } from \"./commands/set_movement_mode_to_counterclockwise_circular\"\nimport { set_movement_mode_to_linear } from \"./commands/set_movement_mode_to_linear\"\nimport { set_unit } from \"./commands/set_unit\"\nimport { start_region_statement } from \"./commands/start_region_statement\"\nimport { step_and_repeat } from \"./commands/step_and_repeat\"\nimport { format_specification } from \"./commands/format_specification\"\nimport { set_layer_polarity } from \"./commands/set_layer_polarity\"\nimport { define_aperture_template } from \"./commands/define_aperture_template\"\nimport { select_aperture } from \"./commands/select_aperture\"\n\nexport const gerber_command_map = {\n  add_attribute_on_aperture,\n  add_attribute_on_file,\n  add_attribute_on_object,\n  aperture_block,\n  comment,\n  create_arc,\n  define_aperture,\n  define_macro_aperture_template,\n  delete_attribute,\n  end_of_file,\n  move_operation,\n  flash_operation,\n  end_region_statement,\n  format_specification,\n  // load_mirroring,\n  // load_polarity,\n  load_rotation,\n  // load_scaling,\n  plot_operation,\n  // set_coordinate_format,\n  // set_current_aperture_d_code,\n  define_aperture_template,\n  set_movement_mode_to_clockwise_circular,\n  set_movement_mode_to_counterclockwise_circular,\n  set_movement_mode_to_linear,\n  select_aperture,\n  set_unit,\n  set_layer_polarity,\n  start_region_statement,\n  // step_and_repeat,\n} as const satisfies Record<string, GerberCommandDef<any, any>>\n\nexport type AnyGerberCommand = z.infer<\n  (typeof gerber_command_map)[keyof typeof gerber_command_map][\"schema\"]\n>\n","import type { AnyGerberCommand } from \"./any_gerber_command\"\nimport type { z } from \"zod\"\nimport { gerber_command_map } from \"./any_gerber_command\"\n\nexport const gerberBuilder = () => new GerberBuilder()\n\nclass GerberBuilder {\n  commands: Array<AnyGerberCommand>\n\n  constructor() {\n    this.commands = []\n  }\n\n  $if(\n    condition: boolean,\n    fn: (gb: GerberBuilder) => GerberBuilder,\n  ): GerberBuilder {\n    if (condition) {\n      return fn(this)\n    }\n    return this\n  }\n\n  add<T extends keyof typeof gerber_command_map>(\n    cmd: T,\n    props: z.input<(typeof gerber_command_map)[T][\"schema\"]>,\n  ): GerberBuilder {\n    this.commands.push({\n      ...({ command_code: gerber_command_map[cmd].command_code } as any),\n      ...props,\n    })\n    return this\n  }\n\n  build(): Array<AnyGerberCommand> {\n    return this.commands\n  }\n}\n\n// Type test:\n// gerber()\n//   .add(\"add_attribute_on_aperture\", {\n//     attribute_name: \"foo\",\n//     attribute_value: \"bar\",\n//   })\n//   .add(\"end_of_file\", {})\n//   .build()\n","import type { AnyGerberCommand } from \"../any_gerber_command\"\nimport { gerber_command_map } from \"../any_gerber_command\"\n\nexport const stringifyGerberCommand = (command: AnyGerberCommand): string => {\n  const command_def = Object.values(gerber_command_map).find(\n    (cmd) => cmd.command_code === command.command_code,\n  )\n\n  if (!command_def) {\n    throw new Error(\n      `Command for command_code:\"${command.command_code}\" not found`,\n    )\n  }\n\n  if (!command_def.stringify) {\n    throw new Error(\n      `Command for command_code:\"${command.command_code}\" does not have a stringify method`,\n    )\n  }\n\n  return command_def.stringify(command as any)\n}\n","import type { AnyGerberCommand } from \"../any_gerber_command\"\nimport { stringifyGerberCommand } from \"./stringify-gerber-command\"\n\nexport const stringifyGerberCommandLayers = (\n  commandLayers: Record<string, AnyGerberCommand[]>,\n): Record<string, string> => {\n  const stringifiedCommandLayers: Record<string, string> = {}\n  for (const layerName of Object.keys(commandLayers)) {\n    stringifiedCommandLayers[layerName] = commandLayers[layerName]\n      .map((command) => {\n        return stringifyGerberCommand(command)\n      })\n      .join(\"\\n\")\n  }\n  return stringifiedCommandLayers\n}\n","import type { AnyGerberCommand } from \"../any_gerber_command\"\nimport { stringifyGerberCommand } from \"./stringify-gerber-command\"\n\nexport const stringifyGerberCommands = (\n  commands: AnyGerberCommand[],\n): string => {\n  return commands\n    .map((command) => {\n      return stringifyGerberCommand(command)\n    })\n    .join(\"\\n\")\n}\n","/**\n * Return pairs of adjacent elements in an array.\n */\nexport function pairs<T>(arr: Array<T>): Array<[T, T]> {\n  const result: Array<[T, T]> = []\n  for (let i = 0; i < arr.length - 1; i++) {\n    result.push([arr[i], arr[i + 1]])\n  }\n  return result\n}\n","import type { AnyGerberCommand } from \"../any_gerber_command\"\nimport { gerberBuilder } from \"../gerber-builder\"\n\nexport const defineCommonMacros = (glayer: Array<AnyGerberCommand>) => {\n  glayer.push(\n    ...gerberBuilder()\n      .add(\"comment\", { comment: \"APERTURE MACROS START\" })\n      .add(\"define_macro_aperture_template\", {\n        macro_name: \"HORZPILL\",\n        template_code: `\n0 Horizontal pill (stadium) shape macro*\n0 Parameters:*\n0 $1 = Total width*\n0 $2 = Total height*\n0 $3 = Circle diameter (equal to height)*\n0 $4 = Circle center offset\n0 21 = Center Line(Exposure, Width, Height, Center X, Center Y, Rotation)*\n0 1 = Circle(Exposure, Diameter, Center X, Center Y, Rotation)*\n21,1,$1,$2,0.0,0.0,0.0*\n1,1,$3,0.0-$4,0.0*\n1,1,$3,$4,0.0*\n`.trim(),\n      })\n      .add(\"define_macro_aperture_template\", {\n        macro_name: \"VERTPILL\",\n        template_code: `\n0 Vertical pill (stadium) shape macro*\n0 Parameters:*\n0 $1 = Total width*\n0 $2 = Total height*\n0 $3 = Circle diameter (equal to width)*\n0 $4 = Circle center offset\n0 21 = Center Line(Exposure, Width, Height, Center X, Center Y, Rotation)*\n21,1,$1,$2,0.0,0.0,0.0*\n1,1,$3,0.0,0.0-$4*\n1,1,$3,0.0,$4*\n`.trim(),\n      })\n      .add(\"define_macro_aperture_template\", {\n        macro_name: \"RoundRect\",\n        template_code: `\n0 Rectangle with rounded corners*\n0 $1 Corner radius*\n0 $2 $3 $4 $5 $6 $7 $8 $9 X,Y Position of each corner*\n0 Polygon box body*\n4,1,4,$2,$3,$4,$5,$6,$7,$8,$9,$2,$3,0*\n0 Circles for rounded corners*\n1,1,$1+$1,$2,$3*\n1,1,$1+$1,$4,$5*\n1,1,$1+$1,$6,$7*\n1,1,$1+$1,$8,$9*\n0 Rectangles between the rounded corners*\n20,1,$1+$1,$2,$3,$4,$5,0*\n20,1,$1+$1,$4,$5,$6,$7,0*\n20,1,$1+$1,$6,$7,$8,$9,0*\n20,1,$1+$1,$8,$9,$2,$3,0*\n`.trim(),\n      })\n      .add(\"comment\", { comment: \"APERTURE MACROS END\" })\n      .build(),\n  )\n}\n","import type {\n  PCBHole,\n  LayerRef,\n  PCBPlatedHole,\n  PCBSMTPad,\n  PcbCopperText,\n  PcbHole,\n  PcbSolderPaste,\n  PcbSilkscreenPath,\n  PcbSilkscreenText,\n} from \"circuit-json\"\nimport stableStringify from \"fast-json-stable-stringify\"\nimport type { AnyGerberCommand } from \"../any_gerber_command\"\nimport type { ApertureTemplateConfig } from \"../commands/define_aperture_template\"\nimport { gerberBuilder } from \"../gerber-builder\"\nimport type { GerberLayerName } from \"./GerberLayerName\"\nimport { getAllTraceWidths } from \"./getAllTraceWidths\"\nimport type { AnyCircuitElement } from \"circuit-json\"\n\nconst getLayerRefFromGerberLayerName = (\n  glayer_name: GerberLayerName,\n): LayerRef => {\n  if (glayer_name.startsWith(\"F_\")) return \"top\"\n  if (glayer_name.startsWith(\"B_\")) return \"bottom\"\n\n  const innerLayerMatch = glayer_name.match(/^In([1-6])_/)\n  if (innerLayerMatch) return `inner${innerLayerMatch[1]}` as LayerRef\n\n  throw new Error(`Could not infer layer ref from ${glayer_name}`)\n}\n\nexport function defineAperturesForLayer({\n  glayer,\n  circuitJson,\n  glayer_name,\n}: {\n  glayer: AnyGerberCommand[]\n  circuitJson: AnyCircuitElement[]\n  glayer_name: GerberLayerName\n}) {\n  const getNextApertureNumber = () => {\n    const highest_aperture_number = glayer.reduce((acc, command) => {\n      if (command.command_code === \"ADD\") {\n        return Math.max(acc, command.aperture_number)\n      }\n      return acc\n    }, 0)\n    if (highest_aperture_number === 0) {\n      return 10\n    }\n    return highest_aperture_number + 1\n  }\n\n  glayer.push(\n    ...gerberBuilder()\n      .add(\"comment\", { comment: \"aperture START LIST\" })\n      .build(),\n  )\n\n  // Add all trace width apertures\n  const traceWidths: Record<LayerRef, number[]> = getAllTraceWidths(circuitJson)\n  const layerRef = getLayerRefFromGerberLayerName(glayer_name)\n  for (const width of traceWidths[layerRef]) {\n    glayer.push(\n      ...gerberBuilder()\n        .add(\"define_aperture_template\", {\n          aperture_number: getNextApertureNumber(),\n          standard_template_code: \"C\",\n          diameter: width,\n        })\n        .build(),\n    )\n  }\n\n  // Add all pcb smtpad, plated hole etc. aperatures\n  const apertureConfigs = getAllApertureTemplateConfigsForLayer({\n    circuitJson,\n    layer: layerRef,\n    glayer_name,\n  })\n\n  for (const apertureConfig of apertureConfigs) {\n    glayer.push(\n      ...gerberBuilder()\n        .add(\"define_aperture_template\", {\n          aperture_number: getNextApertureNumber(),\n          ...apertureConfig,\n        })\n        .build(),\n    )\n  }\n\n  glayer.push(\n    ...gerberBuilder()\n      .add(\"delete_attribute\", {})\n      .add(\"comment\", { comment: \"aperture END LIST\" })\n      .build(),\n  )\n}\n\nexport const getApertureConfigFromPcbSmtpad = (\n  elm: PCBSMTPad,\n): ApertureTemplateConfig => {\n  if (elm.shape === \"rect\") {\n    return {\n      standard_template_code: \"R\",\n      x_size: elm.width,\n      y_size: elm.height,\n    }\n  }\n  if (elm.shape === \"circle\") {\n    return {\n      standard_template_code: \"C\",\n      diameter: elm.radius * 2,\n    }\n  }\n  if (elm.shape === \"rotated_rect\") {\n    // Rotation is handled by the LR command, not the aperture definition\n    return {\n      standard_template_code: \"R\",\n      x_size: elm.width,\n      y_size: elm.height,\n    }\n  }\n  if (elm.shape === \"polygon\") {\n    // Polygon shapes don't use apertures - they're drawn as regions\n    throw new Error(\"Polygon SMT pads are drawn as regions, not apertures\")\n  }\n  throw new Error(`Unsupported shape ${(elm as any).shape}`)\n}\n\nexport const getApertureConfigFromPcbSmtpadSoldermask = (\n  elm: PCBSMTPad,\n): ApertureTemplateConfig => {\n  let soldermaskMargin = 0\n  if (\"soldermask_margin\" in elm && typeof elm.soldermask_margin === \"number\") {\n    soldermaskMargin = elm.soldermask_margin\n  }\n\n  if (elm.shape === \"rect\") {\n    return {\n      standard_template_code: \"R\",\n      x_size: elm.width + soldermaskMargin * 2,\n      y_size: elm.height + soldermaskMargin * 2,\n    }\n  }\n  if (elm.shape === \"circle\") {\n    return {\n      standard_template_code: \"C\",\n      diameter: elm.radius * 2 + soldermaskMargin * 2,\n    }\n  }\n  if (elm.shape === \"rotated_rect\") {\n    return {\n      standard_template_code: \"R\",\n      x_size: elm.width + soldermaskMargin * 2,\n      y_size: elm.height + soldermaskMargin * 2,\n    }\n  }\n  if (elm.shape === \"polygon\") {\n    throw new Error(\"Polygon SMT pads are drawn as regions, not apertures\")\n  }\n  throw new Error(`Unsupported shape ${(elm as any).shape}`)\n}\n\nexport const getApertureConfigFromPcbSilkscreenPath = (\n  elm: PcbSilkscreenPath,\n): ApertureTemplateConfig => {\n  if (\"stroke_width\" in elm) {\n    return {\n      standard_template_code: \"C\",\n      diameter: elm.stroke_width,\n    }\n  }\n  throw new Error(`Provide stroke_width for: ${elm as any}`)\n}\n\nexport const getApertureConfigFromPcbSilkscreenText = (\n  elm: PcbSilkscreenText,\n): ApertureTemplateConfig => {\n  if (\"font_size\" in elm) {\n    return {\n      standard_template_code: \"C\",\n      diameter: elm.font_size / 8, // font size and diamater have different units of measurement\n    }\n  }\n  throw new Error(`Provide font_size for: ${elm as any}`)\n}\n\nexport const getApertureConfigFromPcbCopperText = (\n  elm: PcbCopperText,\n): ApertureTemplateConfig => {\n  if (\"font_size\" in elm) {\n    return {\n      standard_template_code: \"C\",\n      diameter: elm.font_size / 8, // font size and diamater have different units of measurement\n    }\n  }\n  throw new Error(`Provide font_size for: ${elm as any}`)\n}\n\nexport const getApertureConfigFromPcbSolderPaste = (\n  elm: PcbSolderPaste,\n): ApertureTemplateConfig => {\n  if (elm.shape === \"rect\") {\n    return {\n      standard_template_code: \"R\",\n      x_size: elm.width,\n      y_size: elm.height,\n    }\n  }\n  if (elm.shape === \"rotated_rect\") {\n    // Rotation is handled by the LR command, not the aperture definition\n    return {\n      standard_template_code: \"R\",\n      x_size: elm.width,\n      y_size: elm.height,\n    }\n  }\n  if (elm.shape === \"circle\") {\n    return {\n      standard_template_code: \"C\",\n      diameter: elm.radius * 2,\n    }\n  }\n  if (elm.shape === \"pill\") {\n    if (!(\"width\" in elm && \"height\" in elm)) {\n      throw new Error(\n        \"Invalid pill shape in getApertureConfigFromPcbPlatedHole: missing dimensions\",\n      )\n    }\n    if (elm.width >= elm.height) {\n      return {\n        macro_name: \"HORZPILL\",\n        x_size: elm.width,\n        y_size: elm.height,\n        circle_diameter: Math.min(elm.width, elm.height),\n        circle_center_offset: elm.width / 2,\n      }\n    }\n    return {\n      macro_name: \"VERTPILL\",\n      x_size: elm.width,\n      y_size: elm.height,\n      circle_diameter: Math.min(elm.width, elm.height),\n      circle_center_offset: elm.height / 2,\n    }\n  }\n  throw new Error(`Unsupported shape ${(elm as any).shape}`)\n}\n\nexport const getApertureConfigFromPcbPlatedHole = (\n  elm: PCBPlatedHole,\n): ApertureTemplateConfig => {\n  if (elm.shape === \"circle\") {\n    if (!(\"outer_diameter\" in elm && \"hole_diameter\" in elm)) {\n      throw new Error(\n        \"Invalid circle shape in getApertureConfigFromPcbPlatedHole: missing diameters\",\n      )\n    }\n    return {\n      standard_template_code: \"C\",\n      diameter: elm.outer_diameter,\n    }\n  }\n  if (elm.shape === \"pill\") {\n    if (!(\"outer_width\" in elm && \"outer_height\" in elm)) {\n      throw new Error(\n        \"Invalid pill shape in getApertureConfigFromPcbPlatedHole: missing dimensions\",\n      )\n    }\n\n    if (elm.outer_width > elm.outer_height) {\n      return {\n        macro_name: \"HORZPILL\",\n        x_size: elm.outer_width,\n        y_size: elm.outer_height,\n        circle_diameter: Math.min(elm.outer_width, elm.outer_height),\n        circle_center_offset: elm.outer_width / 2,\n      }\n    }\n    return {\n      macro_name: \"VERTPILL\",\n      x_size: elm.outer_width,\n      y_size: elm.outer_height,\n      circle_diameter: Math.min(elm.outer_width, elm.outer_height),\n      circle_center_offset: elm.outer_height / 2,\n    }\n  }\n  const shape = elm.shape\n  if (\n    shape === \"circular_hole_with_rect_pad\" ||\n    shape === \"pill_hole_with_rect_pad\" ||\n    shape === \"rotated_pill_hole_with_rect_pad\"\n  ) {\n    if (!(\"rect_pad_width\" in elm && \"rect_pad_height\" in elm)) {\n      throw new Error(\n        `Invalid ${shape} shape in getApertureConfigFromPcbPlatedHole: missing dimensions`,\n      )\n    }\n    return {\n      standard_template_code: \"R\",\n      x_size: elm.rect_pad_width,\n      y_size: elm.rect_pad_height,\n    }\n  }\n  throw new Error(\n    `Unsupported shape in getApertureConfigFromPcbPlatedHole: ${elm.shape}`,\n  )\n}\n\nexport const getApertureConfigFromPcbPlatedHoleSoldermask = (\n  elm: PCBPlatedHole,\n): ApertureTemplateConfig => {\n  let soldermaskMargin = 0\n  if (\"soldermask_margin\" in elm && typeof elm.soldermask_margin === \"number\") {\n    soldermaskMargin = elm.soldermask_margin\n  }\n\n  if (elm.shape === \"circle\") {\n    if (!(\"outer_diameter\" in elm && \"hole_diameter\" in elm)) {\n      throw new Error(\n        \"Invalid circle shape in getApertureConfigFromPcbPlatedHoleSoldermask: missing diameters\",\n      )\n    }\n    return {\n      standard_template_code: \"C\",\n      diameter: elm.outer_diameter + soldermaskMargin * 2,\n    }\n  }\n\n  if (elm.shape === \"pill\") {\n    if (!(\"outer_width\" in elm && \"outer_height\" in elm)) {\n      throw new Error(\n        \"Invalid pill shape in getApertureConfigFromPcbPlatedHoleSoldermask: missing dimensions\",\n      )\n    }\n\n    const outerWidth = elm.outer_width + soldermaskMargin * 2\n    const outerHeight = elm.outer_height + soldermaskMargin * 2\n\n    if (outerWidth > outerHeight) {\n      return {\n        macro_name: \"HORZPILL\",\n        x_size: outerWidth,\n        y_size: outerHeight,\n        circle_diameter: Math.min(outerWidth, outerHeight),\n        circle_center_offset: outerWidth / 2,\n      }\n    }\n    return {\n      macro_name: \"VERTPILL\",\n      x_size: outerWidth,\n      y_size: outerHeight,\n      circle_diameter: Math.min(outerWidth, outerHeight),\n      circle_center_offset: outerHeight / 2,\n    }\n  }\n\n  const shape = elm.shape\n  if (\n    shape === \"circular_hole_with_rect_pad\" ||\n    shape === \"pill_hole_with_rect_pad\" ||\n    shape === \"rotated_pill_hole_with_rect_pad\"\n  ) {\n    if (!(\"rect_pad_width\" in elm && \"rect_pad_height\" in elm)) {\n      throw new Error(\n        `Invalid ${shape} shape in getApertureConfigFromPcbPlatedHoleSoldermask: missing dimensions`,\n      )\n    }\n    return {\n      standard_template_code: \"R\",\n      x_size: elm.rect_pad_width + soldermaskMargin * 2,\n      y_size: elm.rect_pad_height + soldermaskMargin * 2,\n    }\n  }\n\n  throw new Error(\n    `Unsupported shape in getApertureConfigFromPcbPlatedHoleSoldermask: ${elm.shape}`,\n  )\n}\n\nexport const getApertureConfigFromCirclePcbHole = (\n  elm: PcbHole,\n): ApertureTemplateConfig => {\n  if (!(\"hole_diameter\" in elm)) {\n    throw new Error(\n      `Invalid shape called in getApertureConfigFromCirclePcbHole: ${elm.hole_shape}`,\n    )\n  }\n  return {\n    standard_template_code: \"C\",\n    diameter: elm.hole_diameter,\n  }\n}\n\nexport const getApertureConfigFromCirclePcbHoleSoldermask = (\n  elm: PcbHole,\n): ApertureTemplateConfig => {\n  if (!(\"hole_diameter\" in elm)) {\n    throw new Error(\n      `Invalid shape called in getApertureConfigFromCirclePcbHoleSoldermask: ${elm.hole_shape}`,\n    )\n  }\n  let soldermaskMargin = 0\n  if (\"soldermask_margin\" in elm && typeof elm.soldermask_margin === \"number\") {\n    soldermaskMargin = elm.soldermask_margin\n  }\n  return {\n    standard_template_code: \"C\",\n    diameter: elm.hole_diameter + soldermaskMargin * 2,\n  }\n}\n\nexport const getApertureConfigFromOuterDiameter = (elm: {\n  outer_diameter?: number\n}): ApertureTemplateConfig => {\n  if (typeof elm.outer_diameter !== \"number\") {\n    throw new Error(\n      \"outer_diameter not specified in getApertureConfigFromOuterDiameter\",\n    )\n  }\n  return {\n    standard_template_code: \"C\",\n    diameter: elm.outer_diameter,\n  }\n}\n\nfunction getAllApertureTemplateConfigsForLayer({\n  circuitJson,\n  layer,\n  glayer_name,\n}: {\n  circuitJson: AnyCircuitElement[]\n  layer: LayerRef\n  glayer_name: GerberLayerName\n}): ApertureTemplateConfig[] {\n  const configs: ApertureTemplateConfig[] = []\n  const configHashMap = new Set<string>()\n  const isSoldermaskLayer = glayer_name.endsWith(\"_Mask\")\n\n  const addConfigIfNew = (config: ApertureTemplateConfig) => {\n    const hash = stableStringify(config)\n    if (!configHashMap.has(hash)) {\n      configs.push(config)\n      configHashMap.add(hash)\n    }\n  }\n\n  for (const elm of circuitJson) {\n    if (elm.type === \"pcb_smtpad\") {\n      if (elm.layer === layer && elm.shape !== \"polygon\") {\n        if (isSoldermaskLayer) {\n          addConfigIfNew(getApertureConfigFromPcbSmtpadSoldermask(elm))\n        } else {\n          addConfigIfNew(getApertureConfigFromPcbSmtpad(elm))\n        }\n      }\n    } else if (elm.type === \"pcb_solder_paste\") {\n      if (elm.layer === layer) {\n        addConfigIfNew(getApertureConfigFromPcbSolderPaste(elm))\n        if (elm.shape === \"pill\") {\n          addConfigIfNew(\n            getApertureConfigFromPcbSolderPaste({\n              ...elm,\n              width: elm.height,\n              height: elm.width,\n            }),\n          )\n        }\n      }\n    } else if (elm.type === \"pcb_plated_hole\") {\n      if (elm.layers.includes(layer)) {\n        if (\n          glayer_name.endsWith(\"_Mask\") &&\n          elm.is_covered_with_solder_mask === true\n        ) {\n          continue\n        }\n        if (isSoldermaskLayer) {\n          addConfigIfNew(getApertureConfigFromPcbPlatedHoleSoldermask(elm))\n        } else {\n          addConfigIfNew(getApertureConfigFromPcbPlatedHole(elm))\n        }\n      }\n    } else if (elm.type === \"pcb_hole\") {\n      if (\n        glayer_name.endsWith(\"_Mask\") &&\n        elm.is_covered_with_solder_mask === true\n      ) {\n        continue\n      }\n      if (elm.hole_shape === \"circle\") {\n        if (isSoldermaskLayer) {\n          addConfigIfNew(getApertureConfigFromCirclePcbHoleSoldermask(elm))\n        } else {\n          addConfigIfNew(getApertureConfigFromCirclePcbHole(elm))\n        }\n      } else\n        console.warn(\"NOT IMPLEMENTED: drawing gerber for non circle holes\")\n    } else if (elm.type === \"pcb_via\") {\n      addConfigIfNew(getApertureConfigFromOuterDiameter(elm))\n    } else if (elm.type === \"pcb_trace\") {\n      for (const point of elm.route) {\n        if (\n          point.route_type === \"via\" &&\n          typeof point.outer_diameter === \"number\" &&\n          (point.from_layer === layer || point.to_layer === layer)\n        ) {\n          addConfigIfNew(getApertureConfigFromOuterDiameter(point))\n        }\n      }\n    } else if (elm.type === \"pcb_silkscreen_path\")\n      addConfigIfNew(getApertureConfigFromPcbSilkscreenPath(elm))\n    else if (elm.type === \"pcb_silkscreen_text\")\n      addConfigIfNew(getApertureConfigFromPcbSilkscreenText(elm))\n    else if (elm.type === \"pcb_copper_text\") {\n      if (elm.layer === layer)\n        addConfigIfNew(getApertureConfigFromPcbCopperText(elm))\n    }\n  }\n\n  return configs\n}\n","import type { AnyCircuitElement, LayerRef, PCBTrace } from \"circuit-json\"\n\nexport function getAllTraceWidths(\n  soup: AnyCircuitElement[],\n): Record<LayerRef, number[]> {\n  const pcb_traces = soup.filter(\n    (elm): elm is PCBTrace => elm.type === \"pcb_trace\",\n  )\n\n  const widths: Record<LayerRef, Set<number>> = {} as any\n\n  for (const trace of pcb_traces) {\n    for (const segment of trace.route) {\n      if (segment.route_type === \"wire\") {\n        widths[segment.layer] = widths[segment.layer] || new Set<number>()\n        widths[segment.layer].add(segment.width)\n      }\n    }\n  }\n\n  return {\n    top: Array.from(widths.top || []),\n    inner1: Array.from(widths.inner1 || []),\n    inner2: Array.from(widths.inner2 || []),\n    inner3: Array.from(widths.inner3 || []),\n    inner4: Array.from(widths.inner4 || []),\n    inner5: Array.from(widths.inner5 || []),\n    inner6: Array.from(widths.inner6 || []),\n    bottom: Array.from(widths.bottom || []),\n  } as any\n}\n","import type {\n  ApertureTemplateConfig,\n  DefineAperatureTemplateCommand,\n} from \"../commands/define_aperture_template\"\nimport type { AnyGerberCommand } from \"../any_gerber_command\"\n\nexport const findApertureNumber = (\n  glayer: AnyGerberCommand[],\n  search_params:\n    | {\n        trace_width?: number\n      }\n    | ApertureTemplateConfig,\n): number => {\n  let aperture: any\n  if (\"trace_width\" in search_params) {\n    const trace_width = search_params.trace_width\n    aperture = glayer.find(\n      (command): command is DefineAperatureTemplateCommand =>\n        \"standard_template_code\" in command &&\n        command.command_code === \"ADD\" &&\n        command.standard_template_code === \"C\" &&\n        command.diameter === trace_width,\n    )\n  } else if (\n    \"standard_template_code\" in search_params ||\n    \"macro_name\" in search_params\n  ) {\n    aperture = glayer.find(\n      (command): command is DefineAperatureTemplateCommand =>\n        command.command_code === \"ADD\" &&\n        Object.keys(search_params).every(\n          (param_name) =>\n            command[param_name as keyof typeof search_params] ===\n            search_params[param_name as keyof typeof search_params],\n        ),\n    )\n  }\n\n  if (!aperture) {\n    // TODO add FileFunction/layer name to this error to help narrow it\n    throw new Error(\n      `Aperture not found for search params ${JSON.stringify(search_params)}`,\n    )\n  }\n  return aperture.aperture_number\n}\n","{\n  \"name\": \"circuit-json-to-gerber\",\n  \"version\": \"0.0.63\",\n  \"main\": \"dist/index.js\",\n  \"type\": \"module\",\n  \"scripts\": {\n    \"build\": \"tsup-node src/index.ts src/cli.ts --format esm --dts --sourcemap\",\n    \"format\": \"biome format --write .\",\n    \"format:check\": \"biome format .\",\n    \"start\": \"bun --bun site/index.html\",\n    \"build:site\": \"bun build site/index.html --outdir ./site-export\"\n  },\n  \"files\": [\n    \"dist\"\n  ],\n  \"bin\": {\n    \"circuit-to-gerber\": \"./dist/cli.js\"\n  },\n  \"devDependencies\": {\n    \"@biomejs/biome\": \"^1.8.3\",\n    \"@types/archiver\": \"^6.0.3\",\n    \"@types/bun\": \"^1.1.8\",\n    \"@types/node\": \"^22.5.2\",\n    \"@types/react\": \"^19.2.7\",\n    \"@types/react-dom\": \"^19.1.5\",\n    \"archiver\": \"^7.0.1\",\n    \"bun-match-svg\": \"^0.0.13\",\n    \"circuit-json\": \"^0.0.421\",\n    \"commander\": \"^12.1.0\",\n    \"gerber-to-svg\": \"^4.2.8\",\n    \"gerberts\": \"^0.0.3\",\n    \"jszip\": \"^3.10.1\",\n    \"pcb-stackup\": \"^4.2.8\",\n    \"react\": \"^19.2.1\",\n    \"react-dom\": \"^19.2.1\",\n    \"tscircuit\": \"^0.0.1705\",\n    \"tsup\": \"^8.2.4\"\n  },\n  \"peerDependencies\": {\n    \"typescript\": \"^5.0.0\",\n    \"tscircuit\": \"*\",\n    \"circuit-json\": \"*\"\n  },\n  \"dependencies\": {\n    \"@tscircuit/alphabet\": \"^0.0.25\",\n    \"fast-json-stable-stringify\": \"^2.1.0\",\n    \"transformation-matrix\": \"^3.0.0\"\n  }\n}\n","import type { LayerRef } from \"circuit-json\"\nimport type { AnyGerberCommand } from \"src/gerber/any_gerber_command\"\nimport { gerberBuilder } from \"../gerber-builder\"\nimport packageJson from \"../../../package.json\"\n\nconst layerAndTypeToFileFunction = {\n  \"top-copper\": \"Copper,L1,Top\",\n  \"top-soldermask\": \"Soldermask,Top\",\n  \"bottom-soldermask\": \"Soldermask,Bot\",\n  \"top-silkscreen\": \"Legend,Top\",\n  \"bottom-silkscreen\": \"Legend,Bot\",\n  \"top-paste\": \"Paste,Top\",\n  \"bottom-paste\": \"Paste,Bot\",\n  edgecut: \"Profile,NP\",\n}\n\nconst getCopperLayerNumber = (layer: LayerRef, total_layer_count: number) => {\n  if (layer === \"top\") return 1\n  if (layer === \"bottom\") return total_layer_count\n  return Number(layer.replace(\"inner\", \"\")) + 1\n}\n\n/**\n * Returns headers for a Gerber file. Here's a typical header:\n *\n * %TF.GenerationSoftware,KiCad,Pcbnew,8.0.1*%\n * %TF.CreationDate,2024-04-08T11:14:22-07:00*%\n * %TF.ProjectId,,58585858-5858-4585-9858-585858585858,rev?*%\n * %TF.SameCoordinates,Original*%\n * %TF.FileFunction,Copper,L1,Top*%\n * %TF.FilePolarity,Positive*%\n * %FSLAX46Y46*%\n * G04 Gerber Fmt 4.6, Leading zero omitted, Abs format (unit mm)*\n * G04 Created by KiCad (PCBNEW 8.0.1) date 2024-04-08 11:14:22*\n * %MOMM*%\n * %LPD*%\n */\nexport const getCommandHeaders = (opts: {\n  layer: \"edgecut\" | LayerRef\n  layer_type?: \"copper\" | \"soldermask\" | \"silkscreen\" | \"paste\"\n  total_layer_count?: number\n}): AnyGerberCommand[] => {\n  const total_layer_count = opts.total_layer_count ?? 2\n  let file_function: string | undefined\n  if (opts.layer_type === \"copper\" && opts.layer !== \"edgecut\") {\n    const layerNumber = getCopperLayerNumber(opts.layer, total_layer_count)\n    const layerPosition =\n      opts.layer === \"top\" ? \"Top\" : opts.layer === \"bottom\" ? \"Bot\" : \"Inr\"\n    file_function = `Copper,L${layerNumber},${layerPosition}`\n  } else {\n    file_function =\n      layerAndTypeToFileFunction[\n        (opts.layer_type\n          ? `${opts.layer}-${opts.layer_type}`\n          : opts.layer) as keyof typeof layerAndTypeToFileFunction\n      ]\n  }\n  return (\n    gerberBuilder()\n      .add(\"add_attribute_on_file\", {\n        attribute_name: \"GenerationSoftware\",\n        attribute_value: `tscircuit,circuit-json-to-gerber,${packageJson.version}`,\n      })\n      .add(\"add_attribute_on_file\", {\n        attribute_name: \"CreationDate\",\n        attribute_value: new Date().toISOString(),\n      })\n      // .add(\"add_attribute_on_file\", {\n      //   attribute_name: \"ProjectId\",\n      //   attribute_value: \"\",\n      // })\n      .add(\"add_attribute_on_file\", {\n        attribute_name: \"SameCoordinates\",\n        attribute_value: \"Original\",\n      })\n      .add(\"add_attribute_on_file\", {\n        attribute_name: \"FileFunction\",\n        attribute_value: file_function,\n      })\n      .$if(opts.layer !== \"edgecut\", (gb) =>\n        gb.add(\"add_attribute_on_file\", {\n          attribute_name: \"FilePolarity\",\n          attribute_value:\n            opts.layer_type === \"soldermask\" ? \"Negative\" : \"Positive\",\n        }),\n      )\n      .add(\"format_specification\", {})\n      .add(\"set_unit\", {\n        unit: \"MM\",\n      })\n      .add(\"comment\", {\n        comment: \"Gerber Fmt 4.6, Leading zero omitted, Abs format (unit mm)\",\n      })\n      .add(\"comment\", {\n        comment: `Created by tscircuit (builder) date ${new Date().toISOString()}`,\n      })\n      .add(\"set_movement_mode_to_linear\", {})\n      .add(\"set_layer_polarity\", {\n        polarity: \"D\",\n      })\n      .add(\"create_arc\", {})\n      .build()\n  )\n}\n","import type { LayerRef } from \"circuit-json\"\nimport type { GerberLayerName } from \"./GerberLayerName\"\n\nconst layerRefToGerberPrefix = {\n  top: \"F_\",\n  bottom: \"B_\",\n  inner1: \"In1_\",\n  inner2: \"In2_\",\n  inner3: \"In3_\",\n  inner4: \"In4_\",\n  inner5: \"In5_\",\n  inner6: \"In6_\",\n} as const\nconst layerTypeToGerberSuffix = {\n  copper: \"Cu\",\n  silkscreen: \"SilkScreen\",\n  soldermask: \"Mask\",\n  mask: \"Mask\",\n  paste: \"Paste\",\n} as const\n\nexport const getGerberLayerName = (\n  layer_ref: LayerRef | \"edgecut\",\n  layer_type: \"copper\" | \"silkscreen\" | \"soldermask\" | \"paste\",\n): GerberLayerName => {\n  if (layer_ref === \"edgecut\") return \"Edge_Cuts\"\n  if (layer_ref.startsWith(\"inner\") && layer_type !== \"copper\") {\n    throw new Error(`Inner layer ${layer_ref} only supports copper gerbers`)\n  }\n  return `${layerRefToGerberPrefix[layer_ref as keyof typeof layerRefToGerberPrefix]}${layerTypeToGerberSuffix[layer_type]}` as GerberLayerName\n}\n","import type { AnyCircuitElement, PcbPlatedHole } from \"circuit-json\"\nimport { pairs } from \"../utils/pairs\"\nimport { gerberBuilder } from \"../gerber-builder\"\nimport type { LayerToGerberCommandsMap } from \"./GerberLayerName\"\nimport { defineCommonMacros } from \"./define-common-macros\"\nimport {\n  defineAperturesForLayer,\n  getApertureConfigFromCirclePcbHole,\n  getApertureConfigFromPcbPlatedHole,\n  getApertureConfigFromPcbPlatedHoleSoldermask,\n  getApertureConfigFromCirclePcbHoleSoldermask,\n  getApertureConfigFromPcbCopperText,\n  getApertureConfigFromPcbSilkscreenPath,\n  getApertureConfigFromPcbSilkscreenText,\n  getApertureConfigFromPcbSmtpad,\n  getApertureConfigFromPcbSmtpadSoldermask,\n  getApertureConfigFromPcbSolderPaste,\n  getApertureConfigFromOuterDiameter,\n} from \"./defineAperturesForLayer\"\nimport type { PcbCutout } from \"circuit-json\"\nimport { findApertureNumber } from \"./findApertureNumber\"\nimport { getCommandHeaders } from \"./getCommandHeaders\"\nimport { getGerberLayerName } from \"./getGerberLayerName\"\nimport { lineAlphabet } from \"@tscircuit/alphabet\"\nimport {\n  applyToPoint,\n  compose,\n  identity,\n  rotate,\n  translate,\n  type Matrix,\n} from \"transformation-matrix\"\nimport type { AnyGerberCommand } from \"../any_gerber_command\"\nimport type { LayerRef } from \"circuit-json\"\n\nconst getLayerCount = (circuitJson: AnyCircuitElement[]) => {\n  const board = circuitJson.find((element) => element.type === \"pcb_board\") as\n    | { num_layers?: number }\n    | undefined\n  const numLayers = board?.num_layers ?? 2\n  return Math.max(2, Math.min(8, numLayers))\n}\n\nconst getInnerLayerRefs = (layerCount: number): LayerRef[] =>\n  Array.from({ length: layerCount - 2 }, (_, i) => `inner${i + 1}` as LayerRef)\n\nconst getGerberInnerLayerName = (layerRef: LayerRef) => {\n  if (!layerRef.startsWith(\"inner\")) {\n    throw new Error(`Expected inner layer, got ${layerRef}`)\n  }\n  return `In${layerRef.replace(\"inner\", \"\")}_Cu` as const\n}\n\n/**\n * Converts Circuit JSON to arrays of Gerber commands for each layer\n */\nexport const convertSoupToGerberCommands = (\n  circuitJson: AnyCircuitElement[],\n  opts: { flip_y_axis?: boolean } = {},\n): LayerToGerberCommandsMap => {\n  opts.flip_y_axis ??= false\n  const hasPanel = circuitJson.some((e) => e.type === \"pcb_panel\")\n  const layerCount = getLayerCount(circuitJson)\n  const innerLayerRefs = getInnerLayerRefs(layerCount)\n  const copperLayerRefs = [\"top\", ...innerLayerRefs, \"bottom\"] as LayerRef[]\n  const outerLayerRefs = [\"top\", \"bottom\"] as const\n  const glayers: LayerToGerberCommandsMap = {\n    F_Cu: getCommandHeaders({\n      layer: \"top\",\n      layer_type: \"copper\",\n      total_layer_count: layerCount,\n    }),\n    F_SilkScreen: getCommandHeaders({\n      layer: \"top\",\n      layer_type: \"silkscreen\",\n    }),\n    F_Mask: getCommandHeaders({\n      layer: \"top\",\n      layer_type: \"soldermask\",\n    }),\n    F_Paste: getCommandHeaders({\n      layer: \"top\",\n      layer_type: \"paste\",\n    }),\n    B_Cu: getCommandHeaders({\n      layer: \"bottom\",\n      layer_type: \"copper\",\n      total_layer_count: layerCount,\n    }),\n    B_SilkScreen: getCommandHeaders({\n      layer: \"bottom\",\n      layer_type: \"silkscreen\",\n    }),\n    B_Mask: getCommandHeaders({\n      layer: \"bottom\",\n      layer_type: \"soldermask\",\n    }),\n    B_Paste: getCommandHeaders({\n      layer: \"bottom\",\n      layer_type: \"paste\",\n    }),\n    Edge_Cuts: getCommandHeaders({\n      layer: \"edgecut\",\n    }),\n  }\n\n  for (const innerLayerRef of innerLayerRefs) {\n    glayers[getGerberInnerLayerName(innerLayerRef)] = getCommandHeaders({\n      layer: innerLayerRef,\n      layer_type: \"copper\",\n      total_layer_count: layerCount,\n    })\n  }\n\n  const copperGerberLayerNames = copperLayerRefs.map((layerRef) =>\n    getGerberLayerName(layerRef, \"copper\"),\n  )\n  const outerGerberLayerNames = outerLayerRefs.flatMap((layerRef) => [\n    getGerberLayerName(layerRef, \"soldermask\"),\n    getGerberLayerName(layerRef, \"paste\"),\n    getGerberLayerName(layerRef, \"silkscreen\"),\n  ])\n\n  for (const glayer_name of [\n    \"F_Cu\",\n    ...copperGerberLayerNames.filter((name) => name !== \"F_Cu\"),\n    ...outerGerberLayerNames,\n  ] as const) {\n    const glayer = glayers[glayer_name]\n    defineCommonMacros(glayer)\n    defineAperturesForLayer({\n      circuitJson,\n      glayer,\n      glayer_name,\n    })\n  }\n\n  // Edgecuts has a single aperature\n  glayers.Edge_Cuts.push(\n    ...gerberBuilder()\n      .add(\"define_aperture_template\", {\n        aperture_number: 10,\n        standard_template_code: \"C\",\n        diameter: 0.05, //mm\n      })\n      .build(),\n  )\n\n  /**\n   * \"maybe flip y axis\" to handle y axis negating\n   */\n  const mfy = (y: number) => (opts.flip_y_axis ? -y : y)\n\n  const renderVectorText = (\n    element: any,\n    layer: LayerRef,\n    layerType: \"copper\" | \"silkscreen\",\n    getApertureConfig: (elm: any) => any,\n  ) => {\n    if (element.layer !== layer) return\n    // The acctual Uppercase letters are 70% of the font size\n    // sources: https://forum.generic-mapping-tools.org/t/what-exactly-is-the-custom-font-s-height-point-size-ratio/1265/2\n    const CAP_HEIGHT_SCALE = 0.7 // Adjust based on your font's metrics\n    const glayer = glayers[getGerberLayerName(layer, layerType)]\n    const apertureConfig = getApertureConfig(element)\n    const gerber = gerberBuilder().add(\"select_aperture\", {\n      aperture_number: findApertureNumber(glayer, apertureConfig),\n    })\n\n    let initialX = element.anchor_position.x\n    let initialY = element.anchor_position.y\n    const fontSize = element.font_size * CAP_HEIGHT_SCALE\n    const letterSpacing = fontSize * 0.4\n    const spaceWidth = fontSize * 0.5\n\n    const textWidth =\n      element.text.split(\"\").reduce((width: number, char: string) => {\n        if (char === \" \") {\n          return width + spaceWidth + letterSpacing\n        }\n        return width + fontSize + letterSpacing\n      }, 0) - letterSpacing\n\n    const textHeight = fontSize\n\n    const anchorAlignment =\n      element.anchor_alignment ||\n      (():\n        | \"top_center\"\n        | \"bottom_center\"\n        | \"center_left\"\n        | \"center_right\"\n        | undefined => {\n        const side = element.anchor_side as\n          | \"top\"\n          | \"bottom\"\n          | \"left\"\n          | \"right\"\n          | undefined\n        if (!side) return undefined\n        switch (side) {\n          case \"top\":\n            return \"top_center\"\n          case \"bottom\":\n            return \"bottom_center\"\n          case \"left\":\n            return \"center_left\"\n          case \"right\":\n            return \"center_right\"\n        }\n      })() ||\n      \"center\"\n\n    switch (anchorAlignment) {\n      case \"top_left\":\n        break\n      case \"top_center\":\n        initialX -= textWidth / 2\n        break\n      case \"top_right\":\n        initialX -= textWidth\n        break\n      case \"center_right\":\n        initialY -= textHeight / 2\n        break\n      case \"center_left\":\n        initialX -= textWidth\n        initialY -= textHeight / 2\n        break\n      case \"bottom_left\":\n        initialY -= textHeight\n        break\n      case \"bottom_center\":\n        initialX -= textWidth / 2\n        initialY -= textHeight\n        break\n      case \"bottom_right\":\n        initialX -= textWidth\n        initialY -= textHeight\n        break\n      default:\n        initialX -= textWidth / 2\n        initialY -= textHeight / 2\n        break\n    }\n\n    let anchoredX = initialX\n    const anchoredY = initialY\n\n    let rotation = element.ccw_rotation || 0\n    const cx = anchoredX + textWidth / 2\n    const cy = anchoredY + textHeight / 2\n    const transforms: Matrix[] = []\n\n    const shouldMirror =\n      element.is_mirrored !== undefined\n        ? element.is_mirrored\n        : element.layer === \"bottom\"\n\n    if (shouldMirror) {\n      transforms.push(\n        translate(cx, cy),\n        { a: -1, b: 0, c: 0, d: 1, e: 0, f: 0 },\n        translate(-cx, -cy),\n      )\n      rotation = -rotation\n    }\n\n    if (rotation) {\n      const rad = (rotation * Math.PI) / 180\n      transforms.push(translate(cx, cy), rotate(rad), translate(-cx, -cy))\n    }\n\n    const transformMatrix =\n      transforms.length > 0 ? compose(...transforms) : undefined\n\n    const applyTransform = (point: { x: number; y: number }) =>\n      transformMatrix ? applyToPoint(transformMatrix, point) : point\n\n    if (layerType === \"copper\" && element.is_knockout) {\n      const padding = element.knockout_padding ?? {\n        left: 0.2,\n        right: 0.2,\n        top: 0.2,\n        bottom: 0.2,\n      }\n\n      const paddedRect = [\n        { x: initialX - padding.left, y: initialY - padding.top },\n        {\n          x: initialX + textWidth + padding.right,\n          y: initialY - padding.top,\n        },\n        {\n          x: initialX + textWidth + padding.right,\n          y: initialY + textHeight + padding.bottom,\n        },\n        {\n          x: initialX - padding.left,\n          y: initialY + textHeight + padding.bottom,\n        },\n      ].map(applyTransform)\n\n      glayer.push(\n        ...gerberBuilder()\n          .add(\"select_aperture\", {\n            aperture_number: findApertureNumber(glayer, apertureConfig),\n          })\n          .add(\"start_region_statement\", {})\n          .add(\"move_operation\", {\n            x: paddedRect[0].x,\n            y: mfy(paddedRect[0].y),\n          })\n          .add(\"plot_operation\", {\n            x: paddedRect[1].x,\n            y: mfy(paddedRect[1].y),\n          })\n          .add(\"plot_operation\", {\n            x: paddedRect[2].x,\n            y: mfy(paddedRect[2].y),\n          })\n          .add(\"plot_operation\", {\n            x: paddedRect[3].x,\n            y: mfy(paddedRect[3].y),\n          })\n          .add(\"plot_operation\", {\n            x: paddedRect[0].x,\n            y: mfy(paddedRect[0].y),\n          })\n          .add(\"end_region_statement\", {})\n          .build(),\n      )\n\n      glayer.push(\n        ...gerberBuilder().add(\"set_layer_polarity\", { polarity: \"C\" }).build(),\n      )\n    }\n\n    for (const char of element.text.toUpperCase()) {\n      if (char === \" \") {\n        anchoredX += spaceWidth + letterSpacing\n        continue\n      }\n\n      const letterPaths = lineAlphabet[char] || []\n      for (const path of letterPaths) {\n        const x1 = anchoredX + path.x1 * fontSize\n        const y1 = anchoredY + path.y1 * fontSize\n        const x2 = anchoredX + path.x2 * fontSize\n        const y2 = anchoredY + path.y2 * fontSize\n\n        const p1 = applyTransform({ x: x1, y: y1 })\n        const p2 = applyTransform({ x: x2, y: y2 })\n\n        gerber.add(\"move_operation\", { x: p1.x, y: mfy(p1.y) })\n        gerber.add(\"plot_operation\", { x: p2.x, y: mfy(p2.y) })\n      }\n\n      anchoredX += fontSize + letterSpacing\n    }\n\n    glayer.push(...gerber.build())\n\n    if (layerType === \"copper\" && element.is_knockout) {\n      glayer.push(\n        ...gerberBuilder().add(\"set_layer_polarity\", { polarity: \"D\" }).build(),\n      )\n    }\n  }\n\n  // Helper to draw a ring into a gerber builder (used for copper pours)\n  const drawRingToBuilder = (\n    builder: ReturnType<typeof gerberBuilder>,\n    ring: {\n      vertices: Array<{ x: number; y: number; bulge?: number }>\n    },\n  ) => {\n    if (!ring || ring.vertices.length === 0) return\n\n    builder.add(\"move_operation\", {\n      x: ring.vertices[0].x,\n      y: mfy(ring.vertices[0].y),\n    })\n\n    const vertices_loop = [...ring.vertices, ring.vertices[0]]\n\n    for (let i = 0; i < vertices_loop.length - 1; i++) {\n      const start = vertices_loop[i]\n      const end = vertices_loop[i + 1]\n\n      if (start.bulge && Math.abs(start.bulge) > 1e-9) {\n        const bulge = (opts.flip_y_axis ? -1 : 1) * (start.bulge as number)\n        if (bulge > 0) {\n          // CCW\n          builder.add(\"set_movement_mode_to_counterclockwise_circular\", {})\n        } else {\n          // CW\n          builder.add(\"set_movement_mode_to_clockwise_circular\", {})\n        }\n\n        const p1 = { x: start.x, y: start.y }\n        const p2 = { x: end.x, y: end.y }\n\n        const dx = p2.x - p1.x\n        const dy = p2.y - p1.y\n        const d = Math.sqrt(dx * dx + dy * dy)\n\n        if (d < 1e-9) {\n          builder.add(\"set_movement_mode_to_linear\", {})\n          builder.add(\"plot_operation\", {\n            x: end.x,\n            y: mfy(end.y),\n          })\n          continue\n        }\n\n        const abs_b = Math.abs(bulge)\n        const theta = 4 * Math.atan(abs_b)\n        if (Math.abs(Math.sin(theta / 2)) < 1e-9) {\n          builder.add(\"set_movement_mode_to_linear\", {})\n          builder.add(\"plot_operation\", {\n            x: end.x,\n            y: mfy(end.y),\n          })\n          continue\n        }\n        const R = d / (2 * Math.sin(theta / 2))\n        const alpha = (Math.PI - theta) / 2\n        const phi = Math.atan2(dy, dx)\n        const delta_angle = bulge > 0 ? alpha : -alpha\n        const angle_p1_center = phi + delta_angle\n        const Cx = p1.x + R * Math.cos(angle_p1_center)\n        const Cy = p1.y + R * Math.sin(angle_p1_center)\n\n        const i_offset = Cx - p1.x\n        const j_offset = Cy - p1.y\n\n        builder.add(\"plot_operation\", {\n          x: end.x,\n          y: mfy(end.y),\n          i: i_offset,\n          j: opts.flip_y_axis ? -j_offset : j_offset,\n        })\n      } else {\n        // line\n        builder.add(\"set_movement_mode_to_linear\", {})\n        builder.add(\"plot_operation\", { x: end.x, y: mfy(end.y) })\n      }\n    }\n  }\n\n  // To conform to Gerber spec (CCW outer, CW inner) from tscircuit\n  // spec (CW outer, CCW inner), we must reverse both.\n  const reverseRing = (ring: {\n    vertices: Array<{ x: number; y: number; bulge?: number }>\n  }): {\n    vertices: Array<{ x: number; y: number; bulge?: number }>\n  } => {\n    const { vertices } = ring\n    if (!vertices || vertices.length === 0) return { vertices: [] }\n    const n = vertices.length\n\n    const reversed_pts = [...vertices].reverse()\n\n    const new_vertices = reversed_pts.map((pt, i) => {\n      const bulge_v_idx = (n - 2 - i + n) % n\n      const bulge = vertices[bulge_v_idx].bulge\n      return { ...pt, bulge: bulge ? -bulge : undefined }\n    })\n\n    return { vertices: new_vertices }\n  }\n\n  // FIRST PASS: Process copper pours first\n  // Copper pours must be rendered before traces/pads/vias so that:\n  // 1. Pour is drawn (LPD - dark)\n  // 2. Cutouts are drawn (LPC - clear)\n  // 3. Traces/pads/vias are drawn on top (LPD - dark)\n  for (const layer of copperLayerRefs) {\n    for (const element of circuitJson) {\n      if (element.type === \"pcb_copper_pour\" && layer === element.layer) {\n        const copper_glayer = glayers[getGerberLayerName(layer, \"copper\")]\n\n        // Collect all pour commands for this element\n        const all_pour_commands: AnyGerberCommand[] = []\n\n        if (element.shape === \"brep\") {\n          const { brep_shape } = element\n          if (!brep_shape) continue\n          const { outer_ring, inner_rings } = brep_shape\n\n          // Draw outer ring as a filled region (dark polarity - default)\n          const outer_builder = gerberBuilder()\n            .add(\"select_aperture\", { aperture_number: 10 })\n            .add(\"start_region_statement\", {})\n\n          drawRingToBuilder(outer_builder, reverseRing(outer_ring))\n\n          outer_builder.add(\"end_region_statement\", {})\n          all_pour_commands.push(...outer_builder.build())\n\n          // Draw inner rings (cutouts) using clear polarity\n          // Each inner ring is drawn as a separate region with LPC (clear)\n          if (inner_rings && inner_rings.length > 0) {\n            // Switch to clear polarity\n            all_pour_commands.push(\n              ...gerberBuilder()\n                .add(\"set_layer_polarity\", { polarity: \"C\" })\n                .build(),\n            )\n\n            for (const inner_ring of inner_rings) {\n              const inner_builder = gerberBuilder()\n                .add(\"select_aperture\", { aperture_number: 10 })\n                .add(\"start_region_statement\", {})\n\n              // For clear polarity, we don't need to reverse - draw as-is\n              // The polarity handles the \"hole\" semantics\n              drawRingToBuilder(inner_builder, inner_ring)\n\n              inner_builder.add(\"end_region_statement\", {})\n              all_pour_commands.push(...inner_builder.build())\n            }\n\n            // Switch back to dark polarity\n            all_pour_commands.push(\n              ...gerberBuilder()\n                .add(\"set_layer_polarity\", { polarity: \"D\" })\n                .build(),\n            )\n          }\n        } else if (element.shape === \"rect\") {\n          const { center, width, height, rotation } = element\n          const w = (width as number) / 2\n          const h = (height as number) / 2\n\n          const points = [\n            { x: -w, y: h }, // Top-left\n            { x: w, y: h }, // Top-right\n            { x: w, y: -h }, // Bottom-right\n            { x: -w, y: -h }, // Bottom-left\n          ]\n\n          let transformMatrix = identity()\n          if (rotation) {\n            const angle_rad = ((rotation as number) * Math.PI) / 180\n            transformMatrix = rotate(angle_rad)\n          }\n          transformMatrix = compose(\n            translate(center.x, center.y),\n            transformMatrix,\n          )\n\n          const transformedPoints = points.map((p) =>\n            applyToPoint(transformMatrix, p),\n          )\n\n          const rect_builder = gerberBuilder()\n            .add(\"select_aperture\", { aperture_number: 10 })\n            .add(\"start_region_statement\", {})\n\n          rect_builder.add(\"move_operation\", {\n            x: transformedPoints[0].x,\n            y: mfy(transformedPoints[0].y),\n          })\n          for (let i = 1; i < transformedPoints.length; i++) {\n            rect_builder.add(\"plot_operation\", {\n              x: transformedPoints[i].x,\n              y: mfy(transformedPoints[i].y),\n            })\n          }\n          rect_builder.add(\"plot_operation\", {\n            x: transformedPoints[0].x,\n            y: mfy(transformedPoints[0].y),\n          })\n\n          rect_builder.add(\"end_region_statement\", {})\n          all_pour_commands.push(...rect_builder.build())\n        } else if (element.shape === \"polygon\") {\n          const { points } = element\n          if (points.length > 0) {\n            const poly_builder = gerberBuilder()\n              .add(\"select_aperture\", { aperture_number: 10 })\n              .add(\"start_region_statement\", {})\n\n            poly_builder.add(\"move_operation\", {\n              x: points[0].x,\n              y: mfy(points[0].y),\n            })\n            for (let i = 1; i < points.length; i++) {\n              poly_builder.add(\"plot_operation\", {\n                x: points[i].x,\n                y: mfy(points[i].y),\n              })\n            }\n            poly_builder.add(\"plot_operation\", {\n              x: points[0].x,\n              y: mfy(points[0].y),\n            })\n\n            poly_builder.add(\"end_region_statement\", {})\n            all_pour_commands.push(...poly_builder.build())\n          }\n        }\n\n        copper_glayer.push(...all_pour_commands)\n\n        if (element.covered_with_solder_mask === false) {\n          const mask_layer = glayers[getGerberLayerName(layer, \"soldermask\")]\n          mask_layer.push(...all_pour_commands)\n        }\n      }\n    }\n  }\n\n  // SECOND PASS: Process all other elements (traces, pads, vias, etc.)\n  for (const layer of [...copperLayerRefs, \"edgecut\"] as const) {\n    for (const element of circuitJson) {\n      if (element.type === \"pcb_trace\") {\n        const { route } = element\n        for (const [a, b] of pairs(route)) {\n          // TODO b kind of matters here, this doesn't handle a bunch of cases\n          // but the definition of a route is also kind of broken, a \"wire\" is\n          // a relationship between two points and can't really be a type of\n          // point\n          if (a.route_type === \"wire\") {\n            if (a.layer === layer) {\n              const glayer = glayers[getGerberLayerName(layer, \"copper\")]\n              glayer.push(\n                ...gerberBuilder()\n                  .add(\"select_aperture\", {\n                    aperture_number: findApertureNumber(glayer, {\n                      trace_width: a.width,\n                    }),\n                  })\n                  .add(\"move_operation\", { x: a.x, y: mfy(a.y) })\n                  .add(\"plot_operation\", { x: b.x, y: mfy(b.y) })\n                  .build(),\n              )\n            }\n          } else if (a.route_type === \"via\" && b.route_type === \"wire\") {\n            if (b.layer === layer) {\n              const glayer = glayers[getGerberLayerName(layer, \"copper\")]\n              glayer.push(\n                ...gerberBuilder()\n                  .add(\"select_aperture\", {\n                    aperture_number: findApertureNumber(glayer, {\n                      trace_width: b.width,\n                    }),\n                  })\n                  .add(\"move_operation\", { x: a.x, y: mfy(a.y) })\n                  .add(\"plot_operation\", { x: b.x, y: mfy(b.y) })\n                  .build(),\n              )\n            }\n          }\n        }\n        for (const point of route) {\n          if (\n            point.route_type === \"via\" &&\n            typeof point.outer_diameter === \"number\" &&\n            (point.from_layer === layer || point.to_layer === layer)\n          ) {\n            const glayer = glayers[getGerberLayerName(layer, \"copper\")]\n            glayer.push(\n              ...gerberBuilder()\n                .add(\"select_aperture\", {\n                  aperture_number: findApertureNumber(\n                    glayer,\n                    getApertureConfigFromOuterDiameter(point),\n                  ),\n                })\n                .add(\"flash_operation\", { x: point.x, y: mfy(point.y) })\n                .build(),\n            )\n          }\n        }\n      } else if (\n        element.type === \"pcb_silkscreen_path\" &&\n        outerLayerRefs.includes(layer as any)\n      ) {\n        if (element.layer === layer) {\n          const glayer = glayers[getGerberLayerName(layer, \"silkscreen\")]\n          const apertureConfig = getApertureConfigFromPcbSilkscreenPath(element)\n          const gerber = gerberBuilder().add(\"select_aperture\", {\n            aperture_number: findApertureNumber(glayer, apertureConfig),\n          })\n          // Move to the first point\n          if (element.route.length > 0) {\n            gerber.add(\"move_operation\", {\n              x: element.route[0].x,\n              y: mfy(element.route[0].y),\n            })\n          }\n\n          // Plot lines to subsequent points\n          for (let i = 1; i < element.route.length; i++) {\n            gerber.add(\"plot_operation\", {\n              x: element.route[i].x,\n              y: mfy(element.route[i].y),\n            })\n          }\n\n          glayer.push(...gerber.build())\n        }\n      } else if (\n        element.type === \"pcb_silkscreen_text\" &&\n        outerLayerRefs.includes(layer as any)\n      ) {\n        renderVectorText(\n          element,\n          layer as LayerRef,\n          \"silkscreen\",\n          getApertureConfigFromPcbSilkscreenText,\n        )\n      } else if (element.type === \"pcb_copper_text\" && layer !== \"edgecut\") {\n        renderVectorText(\n          element,\n          layer,\n          \"copper\",\n          getApertureConfigFromPcbCopperText,\n        )\n      } else if (element.type === \"pcb_smtpad\" && element.shape !== \"polygon\") {\n        if (element.layer === layer && outerLayerRefs.includes(layer as any)) {\n          for (const { glayer, apertureConfig } of [\n            {\n              glayer: glayers[getGerberLayerName(layer, \"copper\")],\n              apertureConfig: getApertureConfigFromPcbSmtpad(element),\n            },\n            {\n              glayer: glayers[getGerberLayerName(layer, \"soldermask\")],\n              apertureConfig: getApertureConfigFromPcbSmtpadSoldermask(element),\n            },\n          ]) {\n            const apertureNumber = findApertureNumber(glayer, apertureConfig)\n            const gb = gerberBuilder().add(\"select_aperture\", {\n              aperture_number: apertureNumber,\n            })\n\n            if (element.shape === \"rotated_rect\" && element.ccw_rotation) {\n              gb.add(\"load_rotation\", {\n                rotation_degrees: element.ccw_rotation,\n              })\n            }\n\n            gb.add(\"flash_operation\", { x: element.x, y: mfy(element.y) })\n\n            if (element.shape === \"rotated_rect\" && element.ccw_rotation) {\n              // Reset rotation\n              gb.add(\"load_rotation\", { rotation_degrees: 0 })\n            }\n\n            glayer.push(...gb.build())\n          }\n        }\n      } else if (element.type === \"pcb_smtpad\" && element.shape === \"polygon\") {\n        if (element.layer === layer && outerLayerRefs.includes(layer as any)) {\n          const layers_to_add_to = [\n            glayers[getGerberLayerName(layer, \"copper\")],\n          ]\n\n          if (element.is_covered_with_solder_mask !== true) {\n            layers_to_add_to.push(\n              glayers[getGerberLayerName(layer, \"soldermask\")],\n            )\n          }\n\n          for (const glayer of layers_to_add_to) {\n            const pad_builder = gerberBuilder()\n              .add(\"select_aperture\", { aperture_number: 10 })\n              .add(\"start_region_statement\", {})\n\n            const { points } = element\n            if (points && points.length > 0) {\n              pad_builder.add(\"move_operation\", {\n                x: points[0].x,\n                y: mfy(points[0].y),\n              })\n              for (let i = 1; i < points.length; i++) {\n                pad_builder.add(\"plot_operation\", {\n                  x: points[i].x,\n                  y: mfy(points[i].y),\n                })\n              }\n              pad_builder.add(\"plot_operation\", {\n                x: points[0].x,\n                y: mfy(points[0].y),\n              })\n            }\n\n            pad_builder.add(\"end_region_statement\", {})\n\n            glayer.push(...pad_builder.build())\n          }\n        }\n      } else if (element.type === \"pcb_solder_paste\") {\n        if (element.layer === layer && outerLayerRefs.includes(layer as any)) {\n          const glayer = glayers[getGerberLayerName(layer, \"paste\")]\n          let rotation = 0\n          if (\n            \"ccw_rotation\" in element &&\n            typeof element.ccw_rotation === \"number\"\n          ) {\n            rotation = element.ccw_rotation\n          } else {\n            // Solder paste has no rotation, so use the matching plated hole's rotation.\n            const platedHole = circuitJson.find(\n              (\n                candidate,\n              ): candidate is PcbPlatedHole & { ccw_rotation: number } =>\n                candidate.type === \"pcb_plated_hole\" &&\n                candidate.x === element.x &&\n                candidate.y === element.y &&\n                \"ccw_rotation\" in candidate &&\n                typeof candidate.ccw_rotation === \"number\",\n            )\n            if (platedHole) {\n              rotation = platedHole.ccw_rotation\n            }\n          }\n\n          let apertureConfig = getApertureConfigFromPcbSolderPaste(element)\n          if (\n            element.shape === \"pill\" &&\n            (rotation === 90 || rotation === 270)\n          ) {\n            apertureConfig = getApertureConfigFromPcbSolderPaste({\n              ...element,\n              width: element.height,\n              height: element.width,\n            })\n            rotation = 0\n          }\n\n          const aperture_number = findApertureNumber(glayer, apertureConfig)\n\n          const gb = gerberBuilder().add(\"select_aperture\", {\n            aperture_number,\n          })\n          if (rotation) {\n            gb.add(\"load_rotation\", {\n              rotation_degrees: rotation,\n            })\n          }\n          gb.add(\"flash_operation\", { x: element.x, y: mfy(element.y) })\n          if (rotation) {\n            gb.add(\"load_rotation\", { rotation_degrees: 0 })\n          }\n          glayer.push(...gb.build())\n        }\n      } else if (element.type === \"pcb_plated_hole\") {\n        if (element.layers.includes(layer as any)) {\n          const layersToAddTo = [\n            glayers[getGerberLayerName(layer, \"copper\")],\n          ] as AnyGerberCommand[][]\n          if (\n            outerLayerRefs.includes(layer as any) &&\n            element.is_covered_with_solder_mask !== true\n          ) {\n            layersToAddTo.push(glayers[getGerberLayerName(layer, \"soldermask\")])\n          }\n          for (const glayer of layersToAddTo) {\n            // --- Compute effective copper pad dimensions ---\n            const holeW =\n              \"hole_width\" in element && typeof element.hole_width === \"number\"\n                ? element.hole_width\n                : 0\n            const holeH =\n              \"hole_height\" in element &&\n              typeof element.hole_height === \"number\"\n                ? element.hole_height\n                : 0\n\n            const padWidthCandidates: number[] = [holeW]\n            if (\n              \"outer_width\" in element &&\n              typeof element.outer_width === \"number\"\n            ) {\n              padWidthCandidates.push(element.outer_width)\n            }\n            if (\n              \"rect_pad_width\" in element &&\n              typeof element.rect_pad_width === \"number\"\n            ) {\n              padWidthCandidates.push(element.rect_pad_width)\n            }\n            const padW = Math.max(...padWidthCandidates)\n\n            const padHeightCandidates: number[] = [holeH]\n            if (\n              \"outer_height\" in element &&\n              typeof element.outer_height === \"number\"\n            ) {\n              padHeightCandidates.push(element.outer_height)\n            }\n            if (\n              \"rect_pad_height\" in element &&\n              typeof element.rect_pad_height === \"number\"\n            ) {\n              padHeightCandidates.push(element.rect_pad_height)\n            }\n            const padH = Math.max(...padHeightCandidates)\n\n            if (element.shape === \"pill\") {\n              // Use min dimension as slot width (aperture circle)\n              const circleApertureConfig = {\n                standard_template_code: \"C\" as const,\n                diameter: Math.min(padW, padH),\n              }\n\n              let aperture_number: number\n              try {\n                aperture_number = findApertureNumber(\n                  glayer,\n                  circleApertureConfig,\n                )\n              } catch {\n                aperture_number =\n                  Math.max(\n                    ...glayer\n                      .filter((cmd) => \"aperture_number\" in cmd)\n                      .map((cmd) => cmd.aperture_number),\n                    9,\n                  ) + 1\n\n                glayer.push(\n                  ...gerberBuilder()\n                    .add(\"define_aperture_template\", {\n                      aperture_number,\n                      ...circleApertureConfig,\n                    })\n                    .build(),\n                )\n              }\n\n              const gb = gerberBuilder().add(\"select_aperture\", {\n                aperture_number,\n              })\n\n              const rotationRadians =\n                ((element.ccw_rotation ?? 0) * Math.PI) / 180\n              const cosTheta = Math.cos(rotationRadians)\n              const sinTheta = Math.sin(rotationRadians)\n\n              const rotateAndTranslate = (dx: number, dy: number) => {\n                const rotatedX = dx * cosTheta - dy * sinTheta\n                const rotatedY = dx * sinTheta + dy * cosTheta\n                return {\n                  x: element.x + rotatedX,\n                  y: element.y + rotatedY,\n                }\n              }\n\n              const isHorizontal = padW >= padH\n              const offset = isHorizontal\n                ? (padW - padH) / 2\n                : (padH - padW) / 2\n\n              if (offset <= 0) {\n                const center = rotateAndTranslate(0, 0)\n                gb.add(\"flash_operation\", { x: center.x, y: mfy(center.y) })\n              } else {\n                const startRelative = isHorizontal\n                  ? { x: -offset, y: 0 }\n                  : { x: 0, y: -offset }\n                const endRelative = isHorizontal\n                  ? { x: offset, y: 0 }\n                  : { x: 0, y: offset }\n\n                const startPoint = rotateAndTranslate(\n                  startRelative.x,\n                  startRelative.y,\n                )\n                const endPoint = rotateAndTranslate(\n                  endRelative.x,\n                  endRelative.y,\n                )\n\n                gb.add(\"flash_operation\", {\n                  x: startPoint.x,\n                  y: mfy(startPoint.y),\n                })\n                  .add(\"move_operation\", {\n                    x: startPoint.x,\n                    y: mfy(startPoint.y),\n                  })\n                  .add(\"plot_operation\", {\n                    x: endPoint.x,\n                    y: mfy(endPoint.y),\n                  })\n                  .add(\"flash_operation\", {\n                    x: endPoint.x,\n                    y: mfy(endPoint.y),\n                  })\n              }\n\n              glayer.push(...gb.build())\n            } else {\n              // Non-pill shapes (rect, circle)\n              const soldermaskGlayer =\n                glayers[getGerberLayerName(layer, \"soldermask\")]\n              let apertureConfig = getApertureConfigFromPcbPlatedHole({\n                ...element,\n                ...(element.shape !== \"circle\"\n                  ? { outer_width: padW, outer_height: padH }\n                  : {}),\n              })\n              if (glayer === soldermaskGlayer) {\n                apertureConfig = getApertureConfigFromPcbPlatedHoleSoldermask({\n                  ...element,\n                  ...(element.shape !== \"circle\"\n                    ? { outer_width: padW, outer_height: padH }\n                    : {}),\n                })\n              }\n              const rotation =\n                \"rect_ccw_rotation\" in element &&\n                typeof element.rect_ccw_rotation === \"number\" &&\n                Math.abs(padW - padH) > 1e-9\n                  ? element.rect_ccw_rotation\n                  : undefined\n\n              const gb = gerberBuilder().add(\"select_aperture\", {\n                aperture_number: findApertureNumber(glayer, apertureConfig),\n              })\n\n              if (rotation)\n                gb.add(\"load_rotation\", { rotation_degrees: rotation })\n\n              gb.add(\"flash_operation\", { x: element.x, y: mfy(element.y) })\n\n              if (rotation) gb.add(\"load_rotation\", { rotation_degrees: 0 })\n\n              glayer.push(...gb.build())\n            }\n          }\n        }\n      } else if (element.type === \"pcb_hole\") {\n        if (\n          outerLayerRefs.includes(layer as any) &&\n          element.is_covered_with_solder_mask !== true\n        ) {\n          for (const glayer of [\n            glayers[getGerberLayerName(layer, \"soldermask\")],\n          ]) {\n            if (element.hole_shape !== \"circle\") {\n              console.warn(\n                \"NOT IMPLEMENTED: drawing gerber for non-round holes\",\n              )\n              continue\n            }\n            glayer.push(\n              ...gerberBuilder()\n                .add(\"select_aperture\", {\n                  aperture_number: findApertureNumber(\n                    glayer,\n                    getApertureConfigFromCirclePcbHoleSoldermask(element),\n                  ),\n                })\n                .add(\"flash_operation\", { x: element.x, y: mfy(element.y) })\n                .build(),\n            )\n          }\n        }\n      } else if (element.type === \"pcb_via\") {\n        if (element.layers.includes(layer as any)) {\n          const layersToAddTo = [\n            glayers[getGerberLayerName(layer, \"copper\")],\n          ] as AnyGerberCommand[][]\n          if (\n            element.is_tented === false &&\n            outerLayerRefs.includes(layer as any)\n          ) {\n            layersToAddTo.push(glayers[getGerberLayerName(layer, \"soldermask\")])\n          }\n          for (const glayer of layersToAddTo) {\n            glayer.push(\n              ...gerberBuilder()\n                .add(\"select_aperture\", {\n                  aperture_number: findApertureNumber(\n                    glayer,\n                    getApertureConfigFromOuterDiameter(element),\n                  ),\n                })\n                .add(\"flash_operation\", { x: element.x, y: mfy(element.y) })\n                .build(),\n            )\n          }\n        }\n      } else if (element.type === \"pcb_board\" && layer === \"edgecut\") {\n        // Skip boards when a panel exists\n        if (hasPanel) continue\n\n        const glayer = glayers.Edge_Cuts\n        const { width, height, center, outline } = element\n        const gerberBuild = gerberBuilder().add(\"select_aperture\", {\n          aperture_number: 10,\n        })\n        if (outline && outline.length > 2) {\n          const outlinePoints = outline.map((point) => ({\n            x: point.x,\n            y: mfy(point.y),\n          }))\n\n          const firstPoint = outlinePoints[0]\n          gerberBuild.add(\"move_operation\", firstPoint)\n          for (let i = 1; i < outlinePoints.length; i++) {\n            gerberBuild.add(\"plot_operation\", outlinePoints[i])\n          }\n\n          const lastPoint = outlinePoints[outlinePoints.length - 1]\n          if (lastPoint.x !== firstPoint.x || lastPoint.y !== firstPoint.y) {\n            gerberBuild.add(\"plot_operation\", firstPoint)\n          }\n        } else {\n          gerberBuild\n            .add(\"move_operation\", {\n              x: center!.x - width! / 2,\n              y: mfy(center!.y - height! / 2),\n            })\n            .add(\"plot_operation\", {\n              x: center!.x + width! / 2,\n              y: mfy(center!.y - height! / 2),\n            })\n            // .add(\"move_operation\", {\n            //   x: center.x + width / 2,\n            //   y: center.y - height / 2,\n            // })\n            .add(\"plot_operation\", {\n              x: center!.x + width! / 2,\n              y: mfy(center!.y + height! / 2),\n            })\n            // .add(\"move_operation\", {\n            //   x: center.x + width / 2,\n            //   y: center.y + height / 2,\n            // })\n            .add(\"plot_operation\", {\n              x: center!.x - width! / 2,\n              y: mfy(center!.y + height! / 2),\n            })\n            // .add(\"move_operation\", {\n            //   x: center.x - width / 2,\n            //   y: center.y + height / 2,\n            // })\n            .add(\"plot_operation\", {\n              x: center!.x - width! / 2,\n              y: mfy(center!.y - height! / 2),\n            })\n        }\n\n        glayer.push(...gerberBuild.build())\n      } else if (element.type === \"pcb_panel\" && layer === \"edgecut\") {\n        const glayer = glayers.Edge_Cuts\n        const panel = element\n        const { width, height, center } = panel\n        const gerberBuild = gerberBuilder()\n          .add(\"select_aperture\", {\n            aperture_number: 10,\n          })\n          .add(\"move_operation\", {\n            x: center!.x - width! / 2,\n            y: mfy(center!.y - height! / 2),\n          })\n          .add(\"plot_operation\", {\n            x: center!.x + width! / 2,\n            y: mfy(center!.y - height! / 2),\n          })\n          .add(\"plot_operation\", {\n            x: center!.x + width! / 2,\n            y: mfy(center!.y + height! / 2),\n          })\n          .add(\"plot_operation\", {\n            x: center!.x - width! / 2,\n            y: mfy(center!.y + height! / 2),\n          })\n          .add(\"plot_operation\", {\n            x: center!.x - width! / 2,\n            y: mfy(center!.y - height! / 2),\n          })\n\n        glayer.push(...gerberBuild.build())\n      } else if (element.type === \"pcb_cutout\") {\n        if (layer === \"edgecut\") {\n          const ec_layer = glayers.Edge_Cuts\n          const cutout_builder = gerberBuilder().add(\"select_aperture\", {\n            aperture_number: 10,\n          })\n\n          const el = element as PcbCutout\n\n          if (el.shape === \"rect\") {\n            const { center, width, height, rotation, corner_radius } = el\n            const w = width / 2\n            const h = height / 2\n            const r = Math.max(\n              0,\n              Math.min(corner_radius ?? 0, Math.abs(w), Math.abs(h)),\n            )\n\n            const makeTransformMatrix = () => {\n              let transformMatrix = identity()\n              if (rotation) {\n                const angle_rad = (rotation * Math.PI) / 180\n                transformMatrix = rotate(angle_rad)\n              }\n              return compose(translate(center.x, center.y), transformMatrix)\n            }\n\n            const transformMatrix = makeTransformMatrix()\n\n            if (r > 0) {\n              const startPoint = { x: -w + r, y: h }\n\n              let currentPoint = applyToPoint(transformMatrix, startPoint)\n\n              cutout_builder.add(\"move_operation\", {\n                x: currentPoint.x,\n                y: mfy(currentPoint.y),\n              })\n\n              const addLine = (point: { x: number; y: number }) => {\n                const transformedPoint = applyToPoint(transformMatrix, point)\n                cutout_builder.add(\"plot_operation\", {\n                  x: transformedPoint.x,\n                  y: mfy(transformedPoint.y),\n                })\n                currentPoint = transformedPoint\n              }\n\n              const addArc = (options: {\n                point: { x: number; y: number }\n                center: { x: number; y: number }\n              }) => {\n                const transformedPoint = applyToPoint(\n                  transformMatrix,\n                  options.point,\n                )\n                const transformedCenter = applyToPoint(\n                  transformMatrix,\n                  options.center,\n                )\n\n                cutout_builder\n                  .add(\"set_movement_mode_to_clockwise_circular\", {})\n                  .add(\"plot_operation\", {\n                    x: transformedPoint.x,\n                    y: mfy(transformedPoint.y),\n                    i: transformedCenter.x - currentPoint.x,\n                    j: mfy(transformedCenter.y) - mfy(currentPoint.y),\n                  })\n                  .add(\"set_movement_mode_to_linear\", {})\n\n                currentPoint = transformedPoint\n              }\n\n              addLine({ x: w - r, y: h })\n              addArc({\n                point: { x: w, y: h - r },\n                center: { x: w - r, y: h - r },\n              })\n              addLine({ x: w, y: -h + r })\n              addArc({\n                point: { x: w - r, y: -h },\n                center: { x: w - r, y: -h + r },\n              })\n              addLine({ x: -w + r, y: -h })\n              addArc({\n                point: { x: -w, y: -h + r },\n                center: { x: -w + r, y: -h + r },\n              })\n              addLine({ x: -w, y: h - r })\n              addArc({\n                point: { x: -w + r, y: h },\n                center: { x: -w + r, y: h - r },\n              })\n            } else {\n              const points = [\n                { x: -w, y: h }, // Top-left\n                { x: w, y: h }, // Top-right\n                { x: w, y: -h }, // Bottom-right\n                { x: -w, y: -h }, // Bottom-left\n              ]\n\n              const transformedPoints = points.map((p) =>\n                applyToPoint(transformMatrix, p),\n              )\n\n              cutout_builder.add(\"move_operation\", {\n                x: transformedPoints[0].x,\n                y: mfy(transformedPoints[0].y),\n              })\n              for (let i = 1; i < transformedPoints.length; i++) {\n                cutout_builder.add(\"plot_operation\", {\n                  x: transformedPoints[i].x,\n                  y: mfy(transformedPoints[i].y),\n                })\n              }\n              cutout_builder.add(\"plot_operation\", {\n                x: transformedPoints[0].x,\n                y: mfy(transformedPoints[0].y),\n              })\n            }\n          } else if (el.shape === \"circle\") {\n            const { center, radius } = el\n\n            // To draw a circle, we draw two semi-circles\n            const p1 = { x: center.x + radius, y: center.y }\n            const p2 = { x: center.x - radius, y: center.y }\n\n            cutout_builder\n              .add(\"move_operation\", {\n                x: p1.x,\n                y: mfy(p1.y),\n              })\n              .add(\"set_movement_mode_to_counterclockwise_circular\", {})\n              // Draw the first semi-circle (top half if we start from rightmost point)\n              .add(\"plot_operation\", {\n                x: p2.x,\n                y: mfy(p2.y),\n                i: -radius,\n                j: 0,\n              })\n              // Draw the second semi-circle (bottom half)\n              .add(\"plot_operation\", {\n                x: p1.x,\n                y: mfy(p1.y),\n                i: radius,\n                j: 0,\n              })\n              .add(\"set_movement_mode_to_linear\", {})\n          } else if (el.shape === \"polygon\") {\n            const { points } = el\n            if (points.length > 0) {\n              cutout_builder.add(\"move_operation\", {\n                x: points[0].x,\n                y: mfy(points[0].y),\n              })\n              for (let i = 1; i < points.length; i++) {\n                cutout_builder.add(\"plot_operation\", {\n                  x: points[i].x,\n                  y: mfy(points[i].y),\n                })\n              }\n              cutout_builder.add(\"plot_operation\", {\n                x: points[0].x,\n                y: mfy(points[0].y),\n              })\n            }\n          }\n          ec_layer.push(...cutout_builder.build())\n        }\n      }\n    }\n  }\n\n  for (const key of Object.keys(glayers)) {\n    glayers[key as keyof LayerToGerberCommandsMap].push(\n      ...gerberBuilder().add(\"end_of_file\", {}).build(),\n    )\n  }\n\n  return glayers\n}\n"],"mappings":";AAAA,SAAS,SAAS;;;ACWX,IAAM,6BAA6B,CAGxC;AAAA,EACA;AAAA,EACA;AAAA,EACA;AACF,MAIqC;AACnC,SAAO;AAAA,IACL;AAAA,IACA;AAAA,IACA;AAAA,EACF;AACF;;;ADzBO,IAAM,OAAO,2BAA2B;AAAA,EAC7C,cAAc;AAAA,EACd,QAAQ,EAAE,OAAO;AAAA,IACf,cAAc,EAAE,QAAQ,MAAM,EAAE,QAAQ,MAAM;AAAA,IAC9C,QAAQ,EAAE,OAAO;AAAA,EACnB,CAAC;AAAA,EACD,WAAW,CAAC,MAAM,QAAQ,EAAE,MAAM;AACpC,CAAC;;;AEVD,SAAS,KAAAA,UAAS;AAMX,IAAM,MAAM,2BAA2B;AAAA,EAC5C,cAAc;AAAA,EACd,QAAQC,GAAE,OAAO;AAAA,IACf,cAAcA,GAAE,QAAQ,KAAK,EAAE,QAAQ,KAAK;AAAA,EAC9C,CAAC;AAAA,EACD,WAAW,MAAM;AACnB,CAAC;;;ACZD,SAAS,KAAAC,UAAS;AAMX,IAAM,MAAM,2BAA2B;AAAA,EAC5C,cAAc;AAAA,EACd,QAAQC,GAAE,OAAO;AAAA,IACf,cAAcA,GAAE,QAAQ,KAAK,EAAE,QAAQ,KAAK;AAAA,EAC9C,CAAC;AAAA,EACD,WAAW,MAAM;AACnB,CAAC;;;ACZD,SAAS,KAAAC,UAAS;AAGX,IAAM,MAAM,2BAA2B;AAAA,EAC5C,cAAc;AAAA,EACd,QAAQC,GAAE,OAAO;AAAA,IACf,cAAcA,GAAE,QAAQ,KAAK,EAAE,QAAQ,KAAK;AAAA,EAC9C,CAAC;AAAA,EACD,WAAW,MAAM;AACnB,CAAC;;;ACTD,SAAS,KAAAC,UAAS;AAGX,IAAM,MAAM,2BAA2B;AAAA,EAC5C,cAAc;AAAA,EACd,QAAQC,GAAE,OAAO;AAAA,IACf,cAAcA,GAAE,QAAQ,KAAK,EAAE,QAAQ,KAAK;AAAA,IAC5C,GAAGA,GAAE,OAAO;AAAA,IACZ,GAAGA,GAAE,OAAO;AAAA,IACZ,OAAOA,GAAE,OAAO;AAAA;AAAA,EAClB,CAAC;AAAA,EACD,WAAW,CAAC,EAAE,GAAG,EAAE,MAAM,OAAO,EAAE,QAAQ,CAAC,CAAC,IAAI,EAAE,QAAQ,CAAC,CAAC;AAC9D,CAAC;;;ACZD,SAAS,KAAAC,UAAS;AAGX,IAAM,MAAM,2BAA2B;AAAA,EAC5C,cAAc;AAAA,EACd,QAAQC,GAAE,OAAO;AAAA,IACf,cAAcA,GAAE,QAAQ,KAAK,EAAE,QAAQ,KAAK;AAAA,EAC9C,CAAC;AAAA,EACD,WAAW,MAAM;AACnB,CAAC;;;ACTD,SAAS,KAAAC,UAAS;AAMX,IAAM,MAAM,2BAA2B;AAAA,EAC5C,cAAc;AAAA,EACd,QAAQC,GAAE,OAAO;AAAA,IACf,cAAcA,GAAE,QAAQ,KAAK,EAAE,QAAQ,KAAK;AAAA,EAC9C,CAAC;AAAA,EACD,WAAW,MAAM;AACnB,CAAC;;;ACZD,SAAS,KAAAC,UAAS;AAMX,IAAM,MAAM,2BAA2B;AAAA,EAC5C,cAAc;AAAA,EACd,QAAQC,GAAE,OAAO;AAAA,IACf,cAAcA,GAAE,QAAQ,KAAK,EAAE,QAAQ,KAAK;AAAA,EAC9C,CAAC;AAAA,EACD,WAAW,MAAM;AACnB,CAAC;;;ACZD,SAAS,KAAAC,UAAS;AAGX,IAAM,MAAM,2BAA2B;AAAA,EAC5C,cAAc;AAAA,EACd,QAAQC,GAAE,OAAO;AAAA,IACf,cAAcA,GAAE,QAAQ,KAAK,EAAE,QAAQ,KAAK;AAAA,EAC9C,CAAC;AAAA,EACD,WAAW,MAAM;AACnB,CAAC;;;ACTD,SAAS,KAAAC,WAAS;AAGX,IAAM,MAAM,2BAA2B;AAAA,EAC5C,cAAc;AAAA,EACd,QAAQC,IAAE,OAAO;AAAA,IACf,cAAcA,IAAE,QAAQ,KAAK,EAAE,QAAQ,KAAK;AAAA,EAC9C,CAAC;AAAA,EACD,WAAW,MAAM;AACnB,CAAC;;;ACTD,SAAS,KAAAC,WAAS;AAGX,IAAM,MAAM,2BAA2B;AAAA,EAC5C,cAAc;AAAA,EACd,QAAQC,IAAE,OAAO;AAAA,IACf,cAAcA,IAAE,QAAQ,KAAK,EAAE,QAAQ,KAAK;AAAA,EAC9C,CAAC;AAAA,EACD,WAAW,MAAM;AACnB,CAAC;;;ACTD,SAAS,KAAAC,WAAS;AAGX,IAAM,cAAc,2BAA2B;AAAA,EACpD,cAAc;AAAA,EACd,QAAQC,IAAE,OAAO;AAAA,IACf,cAAcA,IAAE,QAAQ,aAAa,EAAE,QAAQ,aAAa;AAAA,IAC5D,aAAaA,IAAE,OAAO;AAAA,IACtB,UAAUA,IAAE,OAAO;AAAA,EACrB,CAAC;AAAA,EACD,WAAW,CAAC,MAAM,IAAI,EAAE,WAAW,IAAI,EAAE,SAAS,QAAQ,CAAC,CAAC;AAC9D,CAAC;;;ACXD,SAAS,KAAAC,WAAS;AAGX,IAAM,WAAW,2BAA2B;AAAA,EACjD,cAAc;AAAA,EACd,QAAQC,IAAE,OAAO;AAAA,IACf,cAAcA,IAAE,QAAQ,UAAU,EAAE,QAAQ,UAAU;AAAA,IACtD,GAAGA,IAAE,OAAO;AAAA,IACZ,GAAGA,IAAE,OAAO;AAAA,EACd,CAAC;AAAA,EACD,WAAW,CAAC,MAAM,IAAI,EAAE,EAAE,QAAQ,CAAC,CAAC,IAAI,EAAE,EAAE,QAAQ,CAAC,CAAC;AACxD,CAAC;;;ACXD,SAAS,KAAAC,WAAS;AAGX,IAAM,mBAAmB,2BAA2B;AAAA,EACzD,cAAc;AAAA,EACd,QAAQC,IAAE,OAAO;AAAA,IACf,cAAcA,IAAE,QAAQ,kBAAkB,EAAE,QAAQ,kBAAkB;AAAA,IACtE,gBAAgBA,IAAE,OAAO;AAAA,IACzB,iBAAiBA,IAAE,OAAO;AAAA,EAC5B,CAAC;AAAA,EACD,UAAU,EAAE,gBAAgB,gBAAgB,GAAG;AAC7C,WAAO,SAAS,cAAc,IAAI,eAAe;AAAA,EACnD;AACF,CAAC;;;ACbD,SAAS,KAAAC,WAAS;AAGX,IAAM,iBAAiB,2BAA2B;AAAA,EACvD,cAAc;AAAA,EACd,QAAQC,IAAE,OAAO;AAAA,IACf,cAAcA,IAAE,QAAQ,gBAAgB,EAAE,QAAQ,gBAAgB;AAAA,IAClE,MAAMA,IAAE,OAAO;AAAA,EACjB,CAAC;AAAA,EACD,UAAU,EAAE,KAAK,GAAG;AAClB,WAAO,KAAK,IAAI;AAAA,EAClB;AACF,CAAC;;;ACZD,SAAS,KAAAC,WAAS;AAGX,IAAM,SAAS,2BAA2B;AAAA,EAC/C,cAAc;AAAA,EACd,QAAQC,IAAE,OAAO;AAAA,IACf,cAAcA,IAAE,QAAQ,QAAQ,EAAE,QAAQ,QAAQ;AAAA,EACpD,CAAC;AAAA,EACD,WAAW,MAAM;AACnB,CAAC;;;ACTD,SAAS,KAAAC,WAAS;AAGX,IAAM,cAAc,2BAA2B;AAAA,EACpD,cAAc;AAAA,EACd,QAAQC,IAAE,OAAO;AAAA,IACf,cAAcA,IAAE,QAAQ,aAAa,EAAE,QAAQ,aAAa;AAAA,IAC5D,MAAMA,IAAE,MAAM,CAACA,IAAE,QAAQ,MAAM,GAAGA,IAAE,QAAQ,QAAQ,CAAC,CAAC;AAAA,IACtD,IAAIA,IACD,MAAM,CAACA,IAAE,QAAQ,IAAI,GAAGA,IAAE,QAAQ,IAAI,CAAC,CAAC,EACxC,SAAS,EACT,QAAQ,IAAI;AAAA,EACjB,CAAC;AAAA,EACD,UAAU,GAAG;AACX,WAAO,GAAG,EAAE,IAAI,GAAG,CAAC,EAAE,KAAK,KAAK,IAAI,EAAE,EAAE,EAAE;AAAA,EAC5C;AACF,CAAC;;;AChBD,SAAS,KAAAC,WAAS;AAGX,IAAM,WAAW,2BAA2B;AAAA,EACjD,cAAc;AAAA,EACd,QAAQC,IAAE,OAAO;AAAA,IACf,cAAcA,IAAE,QAAQ,UAAU,EAAE,QAAQ,UAAU;AAAA,IACtD,aAAaA,IAAE,OAAO;AAAA,EACxB,CAAC;AAAA,EACD,WAAW,CAAC,MAAM,IAAI,EAAE,WAAW;AACrC,CAAC;;;ACVD,SAAS,KAAAC,WAAS;AAGX,IAAM,uBAAuB,2BAA2B;AAAA,EAC7D,cAAc;AAAA,EACd,QAAQC,IAAE,OAAO;AAAA,IACf,cAAcA,IACX,QAAQ,sBAAsB,EAC9B,QAAQ,sBAAsB;AAAA,IACjC,WAAWA,IAAE,QAAQ;AAAA,EACvB,CAAC;AAAA,EACD,UAAU,EAAE,UAAU,GAAG;AACvB,WAAO,YACH,oDACA;AAAA,EACN;AACF,CAAC;;;AChBD,SAAS,KAAAC,WAAS;AAGX,IAAM,eAAe,2BAA2B;AAAA,EACrD,cAAc;AAAA,EACd,QAAQC,IAAE,OAAO;AAAA,IACf,cAAcA,IAAE,QAAQ,cAAc,EAAE,QAAQ,cAAc;AAAA,EAChE,CAAC;AAAA,EACD,WAAW,MAAM;AACnB,CAAC;;;ACLM,IAAM,6BAA6B;AAAA,EACxC;AAAA,EACA;AAAA,EACA;AAAA,EACA;AAAA,EACA;AAAA,EACA;AAAA,EACA;AAAA,EACA;AAAA,EACA;AAAA,EACA,GAAS;AAAA,EACT;AAAA,EACA;AAAA,EACA;AAAA,EACA;AAAA,EACA;AAAA,EACA;AAAA,EACA;AAAA,EACA;AAAA,EACA;AAAA,EACA;AAAA,EACA;AACF;;;ACrBO,IAAM,yBAAyB,CACpC,aACG;AACH,SAAO,SACJ,IAAI,CAAC,MAAM;AACV,UAAM,MAAM,2BAA2B,EAAE,YAAY;AACrD,WAAO,IAAI,UAAU,CAAQ;AAAA,EAC/B,CAAC,EACA,KAAK,IAAI;AACd;;;ACRA,IAAM,uBAAN,MAA2B;AAAA,EACzB;AAAA,EAEA,cAAc;AACZ,SAAK,WAAW,CAAC;AAAA,EACnB;AAAA,EAEA,IACE,KACA,OACsB;AACtB,SAAK,SAAS,KAAK;AAAA,MACjB,GAAI;AAAA,QACF,cAAc,2BAA2B,GAAG,EAAE;AAAA,MAChD;AAAA,MACA,GAAG;AAAA,IACL,CAAC;AACD,WAAO;AAAA,EACT;AAAA,EAEA,QAAwC;AACtC,WAAO,KAAK;AAAA,EACd;AACF;AAEO,IAAM,gBAAgB,MAAM,IAAI,qBAAqB;;;ACtB5D,IAAM,gBAAgB,CAAC,gBAA0C;AAC/D,QAAM,QAAQ,YAAY,KAAK,CAAC,YAAY,QAAQ,SAAS,WAAW;AAGxE,MAAI,CAAC,SAAS,OAAO,MAAM,eAAe,UAAU;AAClD,WAAO;AAAA,EACT;AACA,SAAO,KAAK,IAAI,GAAG,MAAM,UAAU;AACrC;AAEA,IAAM,iBAAiB,CAAC,OAAiB,eAAuB;AAC9D,MAAI,UAAU,MAAO,QAAO;AAC5B,MAAI,UAAU,SAAU,QAAO;AAE/B,QAAM,kBAAkB,MAAM,MAAM,gBAAgB;AACpD,MAAI,iBAAiB;AACnB,UAAM,mBAAmB,OAAO,gBAAgB,CAAC,CAAC;AAClD,QAAI,oBAAoB,KAAK,oBAAoB,aAAa,GAAG;AAC/D,aAAO,mBAAmB;AAAA,IAC5B;AAAA,EACF;AAEA,QAAM,IAAI,MAAM,kBAAkB,KAAK,SAAS,UAAU,cAAc;AAC1E;AAEA,IAAM,qBAAqB,CACzB,MACA,eACmB;AACnB,QAAM,kBAAkB,eAAe,KAAK,YAAY,UAAU;AAClE,QAAM,gBAAgB,eAAe,KAAK,UAAU,UAAU;AAE9D,MAAI,mBAAmB,eAAe;AACpC,WAAO;AAAA,EACT;AAEA,SAAO;AAAA,IACL,YAAY,KAAK;AAAA,IACjB,UAAU,KAAK;AAAA,EACjB;AACF;AAEA,IAAM,4BAA4B,CAChC,SACA,eAC+B;AAC/B,MAAI,QAAQ,SAAS,qBAAqB,QAAQ,SAAS,WAAW;AACpE,WAAO;AAAA,EACT;AAEA,MACE,gBAAgB,WAChB,OAAO,QAAQ,eAAe,YAC9B,cAAc,WACd,OAAO,QAAQ,aAAa,UAC5B;AACA,WAAO;AAAA,MACL;AAAA,QACE,YAAY,QAAQ;AAAA,QACpB,UAAU,QAAQ;AAAA,MACpB;AAAA,MACA;AAAA,IACF;AAAA,EACF;AAEA,MAAI,SAAqB,CAAC;AAC1B,MAAI,YAAY,WAAW,MAAM,QAAQ,QAAQ,MAAM,GAAG;AACxD,aAAS,QAAQ;AAAA,EACnB;AACA,MAAI,OAAO,SAAS,GAAG;AACrB,UAAM,eAAe,CAAC,GAAG,MAAM,EAAE;AAAA,MAC/B,CAAC,GAAG,MAAM,eAAe,GAAG,UAAU,IAAI,eAAe,GAAG,UAAU;AAAA,IACxE;AACA,WAAO;AAAA,MACL,YAAY,aAAa,CAAC;AAAA,MAC1B,UAAU,aAAa,aAAa,SAAS,CAAC;AAAA,IAChD;AAAA,EACF;AAEA,SAAO;AAAA,IACL,YAAY;AAAA,IACZ,UAAU;AAAA,EACZ;AACF;AAEA,IAAM,iCAAiC,OAAuB;AAAA,EAC5D,YAAY;AAAA,EACZ,UAAU;AACZ;AAEA,IAAM,wBAAwB,CAAC,eAAgC;AAC7D,MAAI,YAAY;AACd,WAAO;AAAA,EACT;AACA,SAAO,+BAA+B;AACxC;AAEA,IAAM,kBAAkB,CACtB,GACA,GACA,eACG;AACH,QAAM,cAAc,mBAAmB,GAAG,UAAU;AACpD,QAAM,cAAc,mBAAmB,GAAG,UAAU;AACpD,SACE,YAAY,eAAe,YAAY,cACvC,YAAY,aAAa,YAAY;AAEzC;AAEA,IAAM,uBAAuB,CAAC;AAAA,EAC5B;AAAA,EACA;AAAA,EACA;AAAA,EACA;AACF,MAKM;AACJ,MACE,QAAQ,SAAS,qBACjB,QAAQ,SAAS,cACjB,QAAQ,SAAS,WACjB;AACA,WAAO;AAAA,EACT;AAEA,MAAI,CAAC,UAAW,QAAO,QAAQ,SAAS;AACxC,MAAI,QAAQ,SAAS,WAAY,QAAO;AAExC,QAAM,mBAAmB,0BAA0B,SAAS,UAAU;AACtE,MAAI,CAAC,iBAAkB,QAAO;AAC9B,QAAM,qBAAqB,sBAAsB,UAAU;AAE3D,SAAO,gBAAgB,kBAAkB,oBAAoB,UAAU;AACzE;AAEA,IAAM,2BAA2B,CAAC;AAAA,EAChC;AAAA,EACA;AAAA,EACA;AACF,MAIM;AACJ,QAAM,aAAa,cAAc,WAAW;AAC5C,MAAI,CAAC,UAAW,QAAO,eAAe,UAAU;AAEhD,QAAM,qBAAqB,sBAAsB,UAAU;AAC3D,QAAM,OAAO,mBAAmB,oBAAoB,UAAU;AAC9D,SAAO,UAAU,eAAe,KAAK,YAAY,UAAU,CAAC,IAAI,eAAe,KAAK,UAAU,UAAU,CAAC;AAC3G;AAEA,IAAM,2BAA2B,CAC/B,gBAC6B;AAC7B,QAAM,YAAsC,CAAC;AAE7C,aAAW,WAAW,aAAa;AACjC,QAAI,QAAQ,SAAS,aAAa;AAChC;AAAA,IACF;AAEA,eAAW,CAAC,OAAO,KAAK,KAAK,QAAQ,MAAM,QAAQ,GAAG;AACpD,UACE,MAAM,eAAe,SACrB,OAAO,MAAM,kBAAkB,YAC/B,OAAO,MAAM,mBAAmB,UAChC;AACA;AAAA,MACF;AAEA,gBAAU,KAAK;AAAA,QACb,MAAM;AAAA,QACN,YAAY,GAAG,QAAQ,YAAY,cAAc,KAAK;AAAA,QACtD,GAAG,MAAM;AAAA,QACT,GAAG,MAAM;AAAA,QACT,eAAe,MAAM;AAAA,QACrB,gBAAgB,MAAM;AAAA,QACtB,YAAY,MAAM;AAAA,QAClB,UAAU,MAAM;AAAA,QAChB,QAAQ,CAAC,MAAM,YAAY,MAAM,QAAQ;AAAA,MAC3C,CAAC;AAAA,IACH;AAAA,EACF;AAEA,SAAO;AACT;AAEA,IAAM,uBAAuB,CAAC,gBAA0C;AAAA,EACtE,GAAG;AAAA,EACH,GAAG,yBAAyB,WAAW;AACzC;AAEO,IAAM,qCAAqC,CAAC;AAAA,EACjD;AAAA,EACA;AAAA,EACA,cAAc;AAAA,EACd;AACF,MAKsC;AACpC,QAAM,UAAU,cAAc;AAC9B,QAAM,aAAa,cAAc,WAAW;AAC5C,QAAM,oBAAoB,qBAAqB,WAAW;AAG1D,UAAQ,IAAI,OAAO,CAAC,CAAC;AAGrB,QAAM,YAAW,oBAAI,KAAK,GAAE,YAAY;AACxC,UACG,IAAI,kBAAkB;AAAA,IACrB,MAAM,+BAA+B,QAAQ;AAAA,EAC/C,CAAC,EACA,IAAI,kBAAkB;AAAA,IACrB,MAAM;AAAA,EACR,CAAC,EACA,IAAI,oBAAoB;AAAA,IACvB,gBAAgB;AAAA,IAChB,iBAAiB;AAAA,EACnB,CAAC,EACA,IAAI,oBAAoB;AAAA,IACvB,gBAAgB;AAAA,IAChB,iBAAiB;AAAA,EACnB,CAAC,EACA,IAAI,oBAAoB;AAAA,IACvB,gBAAgB;AAAA,IAChB,iBAAiB,yBAAyB;AAAA,MACxC;AAAA,MACA;AAAA,MACA;AAAA,IACF,CAAC;AAAA,EACH,CAAC,EACA,IAAI,QAAQ,EAAE,QAAQ,EAAE,CAAC,EACzB,IAAI,eAAe,EAAE,MAAM,UAAU,IAAI,KAAK,CAAC;AAElD,MAAI,eAAe;AAEnB,QAAM,uBAA+C,CAAC;AAGtD,aAAW,WAAW,mBAAmB;AACvC,QACE,CAAC,qBAAqB;AAAA,MACpB;AAAA,MACA;AAAA,MACA;AAAA,MACA;AAAA,IACF,CAAC,GACD;AACA;AAAA,IACF;AAEA,UAAM,eACJ,mBAAmB,WAAW,OAAO,QAAQ,kBAAkB,WAC3D,QAAQ,gBACR,gBAAgB,WACd,OAAO,QAAQ,eAAe,YAC9B,iBAAiB,WACjB,OAAO,QAAQ,gBAAgB,WAC/B,KAAK,IAAI,QAAQ,YAAY,QAAQ,WAAW,IAChD;AAER,QAAI,CAAC,aAAc;AAEnB,QAAI,CAAC,qBAAqB,YAAY,GAAG;AACvC,cAAQ,IAAI,wBAAwB;AAAA,QAClC;AAAA,MACF,CAAC;AACD,cAAQ,IAAI,eAAe;AAAA,QACzB,aAAa;AAAA,QACb,UAAU;AAAA,MACZ,CAAC;AACD,2BAAqB,YAAY,IAAI;AACrC;AAAA,IACF;AAAA,EACF;AAEA,UAAQ,IAAI,gBAAgB,CAAC,CAAC;AAC9B,UAAQ,IAAI,OAAO,CAAC,CAAC;AACrB,UAAQ,IAAI,OAAO,CAAC,CAAC;AAKrB,WAAS,IAAI,IAAI,IAAI,cAAc,KAAK;AACtC,YAAQ,IAAI,YAAY,EAAE,aAAa,EAAE,CAAC;AAC1C,eAAW,WAAW,mBAAmB;AACvC,UACE,QAAQ,SAAS,qBACjB,QAAQ,SAAS,cACjB,QAAQ,SAAS,WACjB;AACA,YACE,CAAC,qBAAqB;AAAA,UACpB;AAAA,UACA;AAAA,UACA;AAAA,UACA;AAAA,QACF,CAAC,GACD;AACA;AAAA,QACF;AAEA,cAAM,eACJ,mBAAmB,WACnB,OAAO,QAAQ,kBAAkB,WAC7B,QAAQ,gBACR,gBAAgB,WACd,OAAO,QAAQ,eAAe,YAC9B,iBAAiB,WACjB,OAAO,QAAQ,gBAAgB,WAC/B,KAAK,IAAI,QAAQ,YAAY,QAAQ,WAAW,IAChD;AAER,YAAI,CAAC,gBAAgB,qBAAqB,YAAY,MAAM,GAAG;AAC7D;AAAA,QACF;AAEA,cAAM,WACJ,OAAO,WAAW,OAAO,QAAQ,MAAM,WAAW,QAAQ,IAAI;AAChE,cAAM,WACJ,OAAO,WAAW,OAAO,QAAQ,MAAM,WAAW,QAAQ,IAAI;AAChE,cAAM,UACJ,mBAAmB,WACnB,OAAO,QAAQ,kBAAkB,WAC7B,QAAQ,gBACR;AACN,cAAM,UACJ,mBAAmB,WACnB,OAAO,QAAQ,kBAAkB,WAC7B,QAAQ,gBACR;AACN,cAAM,UAAU,WAAW;AAC3B,cAAM,UAAU,WAAW;AAC3B,cAAM,cAAc,cAAc,KAAK;AAEvC,YACE,gBAAgB,WAChB,OAAO,QAAQ,eAAe,YAC9B,iBAAiB,WACjB,OAAO,QAAQ,gBAAgB,UAC/B;AACA,gBAAM,YAAY,QAAQ;AAC1B,gBAAM,aAAa,QAAQ;AAC3B,gBAAM,SAAS,KAAK,IAAI,WAAW,UAAU;AAC7C,gBAAM,SAAS,KAAK,IAAI,WAAW,UAAU;AAE7C,cAAI,KAAK,IAAI,SAAS,MAAM,KAAK,MAAM;AACrC,oBAAQ,IAAI,YAAY;AAAA,cACtB,GAAG;AAAA,cACH,GAAG,UAAU;AAAA,YACf,CAAC;AACD;AAAA,UACF;AAEA,gBAAM,kBACJ,uBAAuB,WACvB,OAAO,QAAQ,sBAAsB,WACjC,QAAQ,oBACR,kBAAkB,WAChB,OAAO,QAAQ,iBAAiB,WAChC,QAAQ,eACR;AACR,gBAAM,kBAAmB,kBAAkB,KAAK,KAAM;AACtD,gBAAM,WAAW,KAAK,IAAI,eAAe;AACzC,gBAAM,WAAW,KAAK,IAAI,eAAe;AAEzC,gBAAM,eAAe,aAAa;AAClC,gBAAM,kBAAkB,SAAS,UAAU;AAC3C,gBAAM,gBAAgB,eAClB,EAAE,GAAG,CAAC,gBAAgB,GAAG,EAAE,IAC3B,EAAE,GAAG,GAAG,GAAG,CAAC,eAAe;AAC/B,gBAAM,cAAc,eAChB,EAAE,GAAG,gBAAgB,GAAG,EAAE,IAC1B,EAAE,GAAG,GAAG,GAAG,eAAe;AAE9B,gBAAM,cAAc,CAAC,EAAE,GAAG,EAAE,OAAiC;AAAA,YAC3D,GAAG,IAAI,WAAW,IAAI;AAAA,YACtB,GAAG,IAAI,WAAW,IAAI;AAAA,UACxB;AAEA,gBAAM,aAAa,YAAY,aAAa;AAC5C,gBAAM,WAAW,YAAY,WAAW;AAExC,gBAAM,SAAS,UAAU,WAAW;AACpC,gBAAM,UAAU,UAAU,WAAW,KAAK;AAC1C,gBAAM,OAAO,UAAU,SAAS;AAChC,gBAAM,QAAQ,UAAU,SAAS,KAAK;AAEtC,kBACG,IAAI,YAAY;AAAA,YACf,GAAG;AAAA,YACH,GAAG;AAAA,UACL,CAAC,EACA,IAAI,OAAO;AAAA,YACV,GAAG;AAAA,YACH,GAAG;AAAA,YACH,OAAO;AAAA,UACT,CAAC;AACH;AAAA,QACF;AAEA,gBAAQ,IAAI,YAAY;AAAA,UACtB,GAAG;AAAA,UACH,GAAG,UAAU;AAAA,QACf,CAAC;AAAA,MACH;AAAA,IACF;AAAA,EACF;AAEA,UAAQ,IAAI,OAAO,CAAC,CAAC;AAErB,SAAO,QAAQ,MAAM;AACvB;AAEA,IAAM,uBAAuB,CAAC,MAAsB,eAAuB;AACzE,QAAM,iBAAiB,mBAAmB,MAAM,UAAU;AAC1D,SAAO,IAAI,eAAe,eAAe,YAAY,UAAU,CAAC,KAAK,eAAe,eAAe,UAAU,UAAU,CAAC;AAC1H;AAEA,IAAM,mBAAmB,CAAC,YAA+B;AACvD,MAAI,mBAAmB,WAAW,OAAO,QAAQ,kBAAkB,UAAU;AAC3E,WAAO;AAAA,EACT;AAEA,SACE,gBAAgB,WAChB,OAAO,QAAQ,eAAe,YAC9B,iBAAiB,WACjB,OAAO,QAAQ,gBAAgB;AAEnC;AAEO,IAAM,0CAA0C,CAAC;AAAA,EACtD;AAAA,EACA,cAAc;AAChB,MAGsD;AACpD,QAAM,aAAa,cAAc,WAAW;AAC5C,QAAM,cAAc,IAAI;AAAA,IACtB,qBAAqB,WAAW,EAAE;AAAA,MAChC,CAAC,YAA6C;AAC5C,cAAM,OAAO,0BAA0B,SAAS,UAAU;AAC1D,YAAI,CAAC,MAAM;AACT,iBAAO,CAAC;AAAA,QACV;AACA,eAAO,CAAC,CAAC,qBAAqB,MAAM,UAAU,GAAG,IAAI,CAAC;AAAA,MACxD;AAAA,IACF;AAAA,EACF;AACA,QAAM,oBAAoB,OAAO;AAAA,IAC/B,CAAC,GAAG,YAAY,QAAQ,CAAC,EAAE,KAAK,EAAE,IAAI,CAAC,CAAC,SAAS,IAAI,MAAM;AAAA,MACzD,SAAS,OAAO;AAAA,MAChB,mCAAmC;AAAA,QACjC;AAAA,QACA,WAAW;AAAA,QACX;AAAA,QACA,YAAY;AAAA,MACd,CAAC;AAAA,IACH,CAAC;AAAA,EACH;AACA,QAAM,oBAAoB,YAAY,KAAK,CAAC,YAAY;AACtD,QAAI,QAAQ,SAAS,YAAY;AAC/B,aAAO;AAAA,IACT;AAEA,WAAO,iBAAiB,OAAO;AAAA,EACjC,CAAC;AAED,MAAI,CAAC,mBAAmB;AACtB,WAAO;AAAA,EACT;AAEA,SAAO;AAAA,IACL,GAAG;AAAA,IACH,kBAAkB,mCAAmC;AAAA,MACnD;AAAA,MACA,WAAW;AAAA,MACX;AAAA,IACF,CAAC;AAAA,EACH;AACF;;;ACpfA,SAAS,KAAAC,WAAS;;;ACWX,IAAM,sBAAsB,CAGjC;AAAA,EACA;AAAA,EACA;AAAA,EACA;AACF,MAI8B;AAC5B,SAAO;AAAA,IACL;AAAA,IACA;AAAA,IACA;AAAA,EACF;AACF;;;ADzBO,IAAM,4BAA4B,oBAAoB;AAAA,EAC3D,cAAc;AAAA,EACd,QAAQC,IACL,OAAO;AAAA,IACN,cAAcA,IAAE,QAAQ,IAAI,EAAE,QAAQ,IAAI;AAAA,IAC1C,gBAAgBA,IAAE,OAAO;AAAA,IACzB,iBAAiBA,IAAE,OAAO;AAAA,EAC5B,CAAC,EACA;AAAA,IACC;AAAA,EACF;AAAA,EACF,WAAW,CAAC,EAAE,gBAAgB,gBAAgB,MAAM;AAClD,WAAO,MAAM,cAAc,IAAI,eAAe;AAAA,EAChD;AACF,CAAC;;;AEjBD,SAAS,KAAAC,WAAS;AAGX,IAAM,wBAAwB,oBAAoB;AAAA,EACvD,cAAc;AAAA,EACd,QAAQC,IACL,OAAO;AAAA,IACN,cAAcA,IAAE,QAAQ,IAAI,EAAE,QAAQ,IAAI;AAAA,IAC1C,gBAAgBA,IAAE,OAAO;AAAA,IACzB,iBAAiBA,IAAE,OAAO;AAAA,EAC5B,CAAC,EACA,SAAS,8CAA8C;AAAA,EAC1D,WAAW,CAAC,EAAE,gBAAgB,gBAAgB,MAAM;AAClD,WAAO,OAAO,cAAc,IAAI,eAAe;AAAA,EACjD;AACF,CAAC;;;ACfD,SAAS,KAAAC,WAAS;AAGX,IAAM,0BAA0B,oBAAoB;AAAA,EACzD,cAAc;AAAA,EACd,QAAQC,IACL,OAAO;AAAA,IACN,cAAcA,IAAE,QAAQ,IAAI,EAAE,QAAQ,IAAI;AAAA,IAC1C,gBAAgBA,IAAE,OAAO;AAAA,IACzB,iBAAiBA,IAAE,OAAO;AAAA,EAC5B,CAAC,EACA;AAAA,IACC;AAAA,EACF;AAAA,EACF,WAAW,CAAC,EAAE,gBAAgB,gBAAgB,MAAM;AAClD,WAAO,MAAM,cAAc,IAAI,eAAe;AAAA,EAChD;AACF,CAAC;;;ACjBD,SAAS,KAAAC,WAAS;AAGX,IAAM,iBAAiB,oBAAoB;AAAA,EAChD,cAAc;AAAA,EACd,QAAQC,IACL,OAAO;AAAA,IACN,cAAcA,IAAE,QAAQ,IAAI,EAAE,QAAQ,IAAI;AAAA,IAC1C,OAAOA,IAAE,OAAO;AAAA,EAClB,CAAC,EACA;AAAA,IACC;AAAA,EACF;AAAA,EACF,YAAY;AACV,WAAO;AAAA,EACT;AACF,CAAC;;;AChBD,SAAS,KAAAC,WAAS;AAGX,IAAM,UAAU,oBAAoB;AAAA,EACzC,cAAc;AAAA,EACd,QAAQC,IACL,OAAO;AAAA,IACN,cAAcA,IAAE,QAAQ,KAAK,EAAE,QAAQ,KAAK;AAAA,IAC5C,SAASA,IAAE,OAAO;AAAA,EACpB,CAAC,EACA;AAAA,IACC;AAAA,EACF;AAAA,EACF,WAAW,CAAC,MAAM;AAChB,WAAO,OAAO,EAAE,OAAO;AAAA,EACzB;AACF,CAAC;;;AChBD,SAAS,KAAAC,WAAS;AAGX,IAAM,aAAa,oBAAoB;AAAA,EAC5C,cAAc;AAAA,EACd,QAAQC,IACL,OAAO;AAAA,IACN,cAAcA,IAAE,QAAQ,KAAK,EAAE,QAAQ,KAAK;AAAA,EAC9C,CAAC,EACA;AAAA,IACC;AAAA,EACF;AAAA,EACF,YAAY;AACV,WAAO;AAAA,EACT;AACF,CAAC;;;ACfD,SAAS,KAAAC,WAAS;AAGX,IAAM,kBAAkB,oBAAoB;AAAA,EACjD,cAAc;AAAA,EACd,QAAQC,IACL,OAAO;AAAA,IACN,cAAcA,IAAE,QAAQ,IAAI,EAAE,QAAQ,IAAI;AAAA,IAC1C,eAAeA,IAAE,OAAO;AAAA,EAC1B,CAAC,EACA;AAAA,IACC;AAAA,EACF;AAAA,EACF,YAAY;AACV,WAAO;AAAA,EACT;AACF,CAAC;;;AChBD,SAAS,KAAAC,WAAS;AAGX,IAAM,iCAAiC,oBAAoB;AAAA,EAChE,cAAc;AAAA,EACd,QAAQC,IACL,OAAO;AAAA,IACN,cAAcA,IAAE,QAAQ,IAAI,EAAE,QAAQ,IAAI;AAAA,IAC1C,YAAYA,IAAE,OAAO;AAAA,IACrB,eAAeA,IAAE,OAAO;AAAA,EAC1B,CAAC,EACA,SAAS,wDAAwD;AAAA,EACpE,UAAU,EAAE,YAAY,cAAc,GAAG;AACvC,WAAO,MAAM,UAAU;AAAA,EAAM,aAAa;AAAA,EAC5C;AACF,CAAC;;;ACfD,SAAS,KAAAC,WAAS;AAGX,IAAM,mBAAmB,oBAAoB;AAAA,EAClD,cAAc;AAAA,EACd,QAAQC,IACL,OAAO;AAAA,IACN,cAAcA,IAAE,QAAQ,IAAI,EAAE,QAAQ,IAAI;AAAA,IAC1C,WAAWA,IAAE,OAAO,EAAE,SAAS;AAAA,EACjC,CAAC,EACA;AAAA,IACC;AAAA,EACF;AAAA,EACF,UAAU,EAAE,UAAU,GAAG;AACvB,QAAI,CAAC,WAAW;AACd,aAAO;AAAA,IACT;AACA,WAAO,MAAM,SAAS;AAAA,EACxB;AACF,CAAC;;;ACnBD,SAAS,KAAAC,WAAS;AAGX,IAAM,cAAc,oBAAoB;AAAA,EAC7C,cAAc;AAAA,EACd,QAAQC,IACL,OAAO;AAAA,IACN,cAAcA,IAAE,QAAQ,KAAK,EAAE,QAAQ,KAAK;AAAA,EAC9C,CAAC,EACA,SAAS,mBAAmB;AAAA,EAC/B,YAAY;AACV,WAAO;AAAA,EACT;AACF,CAAC;;;ACbD,SAAS,KAAAC,WAAS;AAGX,IAAM,uBAAuB,oBAAoB;AAAA,EACtD,cAAc;AAAA,EACd,QAAQC,IACL,OAAO;AAAA,IACN,cAAcA,IAAE,QAAQ,KAAK,EAAE,QAAQ,KAAK;AAAA,EAC9C,CAAC,EACA,SAAS,iDAAiD;AAAA,EAC7D,YAAY;AACV,WAAO;AAAA,EACT;AACF,CAAC;;;ACbD,SAAS,KAAAC,WAAS;;;ACcX,IAAM,iCAAiC,CAC5C,kBACW;AACX,QAAM,gBAAgB,gBAAgB;AACtC,MAAI,iBAAiB,cAAc,QAAQ,CAAC;AAE5C,SAAO,eAAe,SAAS,GAAG;AAChC,QAAI,gBAAgB,GAAG;AACrB,uBAAiB,KAAK,eAAe,MAAM,CAAC,CAAC;AAAA,IAC/C,OAAO;AACL,uBAAiB,IAAI,cAAc;AAAA,IACrC;AAAA,EACF;AACA,SAAO;AACT;;;ADxBO,IAAM,kBAAkB,oBAAoB;AAAA,EACjD,cAAc;AAAA,EACd,QAAQC,IACL,OAAO;AAAA,IACN,cAAcA,IAAE,QAAQ,KAAK,EAAE,QAAQ,KAAK;AAAA,IAC5C,GAAGA,IAAE,OAAO;AAAA,IACZ,GAAGA,IAAE,OAAO;AAAA,EACd,CAAC,EACA;AAAA,IACC;AAAA,EACF;AAAA,EACF,UAAU,EAAE,GAAG,EAAE,GAAG;AAClB,UAAM,CAAC,IAAI,EAAE,IAAI,CAAC,GAAG,CAAC,EAAE;AAAA,MAAI,CAAC,UAC3B,+BAA+B,KAAK;AAAA,IACtC;AACA,WAAO,IAAI,EAAE,IAAI,EAAE;AAAA,EACrB;AACF,CAAC;;;AErBD,SAAS,KAAAC,WAAS;AAEX,IAAM,iBAAiBA,IAC3B,OAAO;AAAA,EACN,cAAcA,IAAE,QAAQ,IAAI;AAAA,EAC5B,WAAWA,IAAE,OAAO;AACtB,CAAC,EACA,SAAS,mEAAmE;;;ACP/E,SAAS,KAAAC,WAAS;AAEX,IAAM,gBAAgBA,IAC1B,OAAO;AAAA,EACN,cAAcA,IAAE,QAAQ,IAAI;AAAA,EAC5B,UAAUA,IAAE,OAAO;AACrB,CAAC,EACA;AAAA,EACC;AACF;;;ACTF,SAAS,KAAAC,WAAS;AAGX,IAAM,gBAAgB,oBAAoB;AAAA,EAC/C,cAAc;AAAA,EACd,QAAQC,IACL,OAAO;AAAA,IACN,cAAcA,IAAE,QAAQ,IAAI,EAAE,QAAQ,IAAI;AAAA,IAC1C,kBAAkBA,IAAE,OAAO;AAAA,EAC7B,CAAC,EACA;AAAA,IACC;AAAA,EACF;AAAA,EACF,WAAW,CAAC,EAAE,iBAAiB,MAAM;AACnC,WAAO,MAAM,gBAAgB;AAAA,EAC/B;AACF,CAAC;;;AChBD,SAAS,KAAAC,WAAS;AAEX,IAAM,eAAeA,IACzB,OAAO;AAAA,EACN,cAAcA,IAAE,QAAQ,IAAI;AAAA,EAC5B,SAASA,IAAE,OAAO;AACpB,CAAC,EACA,SAAS,gEAAgE;;;ACN5E,SAAS,KAAAC,WAAS;AAGX,IAAM,iBAAiB,oBAAoB;AAAA,EAChD,cAAc;AAAA,EACd,QAAQC,IACL,OAAO;AAAA,IACN,cAAcA,IAAE,QAAQ,KAAK,EAAE,QAAQ,KAAK;AAAA,IAC5C,GAAGA,IAAE,OAAO;AAAA,IACZ,GAAGA,IAAE,OAAO;AAAA,EACd,CAAC,EACA;AAAA,IACC;AAAA,EACF;AAAA,EACF,UAAU,EAAE,GAAG,EAAE,GAAG;AAClB,UAAM,CAAC,IAAI,EAAE,IAAI,CAAC,GAAG,CAAC,EAAE;AAAA,MAAI,CAAC,UAC3B,+BAA+B,KAAK;AAAA,IACtC;AACA,WAAO,IAAI,EAAE,IAAI,EAAE;AAAA,EACrB;AACF,CAAC;;;ACrBD,SAAS,KAAAC,WAAS;AAIX,IAAM,iBAAiB,oBAAoB;AAAA,EAChD,cAAc;AAAA,EACd,QAAQC,IACL,OAAO;AAAA,IACN,cAAcA,IAAE,QAAQ,KAAK,EAAE,QAAQ,KAAK;AAAA,IAC5C,GAAGA,IAAE,OAAO;AAAA,IACZ,GAAGA,IAAE,OAAO;AAAA,IACZ,GAAGA,IAAE,OAAO,EAAE,SAAS;AAAA,IACvB,GAAGA,IAAE,OAAO,EAAE,SAAS;AAAA,EACzB,CAAC,EACA;AAAA,IACC;AAAA,EACF;AAAA,EACF,UAAU,EAAE,GAAG,GAAG,GAAG,EAAE,GAAG;AACxB,UAAM,KAAK,+BAA+B,CAAC;AAC3C,UAAM,KAAK,+BAA+B,CAAC;AAC3C,QAAI,MAAM,IAAI,EAAE,IAAI,EAAE;AACtB,QAAI,MAAM,UAAa,MAAM,QAAW;AACtC,YAAM,KAAK,+BAA+B,CAAC;AAC3C,YAAM,KAAK,+BAA+B,CAAC;AAC3C,aAAO,IAAI,EAAE,IAAI,EAAE;AAAA,IACrB;AACA,WAAO,GAAG,GAAG;AAAA,EACf;AACF,CAAC;;;AC5BD,SAAS,KAAAC,WAAS;AAEX,IAAM,wBAAwBA,IAClC,OAAO;AAAA,EACN,cAAcA,IAAE,QAAQ,IAAI;AAAA,EAC5B,QAAQA,IAAE,OAAO;AACnB,CAAC,EACA,SAAS,0DAA0D;;;ACPtE,SAAS,KAAAC,WAAS;AAEX,IAAM,8BAA8BA,IACxC,OAAO;AAAA,EACN,cAAcA,IAAE,QAAQ,KAAK;AAAA,EAC7B,QAAQA,IAAE,OAAO;AACnB,CAAC,EACA,SAAS,0DAAqD;;;ACPjE,SAAS,KAAAC,WAAS;AAGX,IAAM,0CAA0C,oBAAoB;AAAA,EACzE,cAAc;AAAA,EACd,QAAQC,IACL,OAAO;AAAA,IACN,cAAcA,IAAE,QAAQ,KAAK,EAAE,QAAQ,KAAK;AAAA,EAC9C,CAAC,EACA;AAAA,IACC;AAAA,EACF;AAAA,EACF,YAAY;AACV,WAAO;AAAA,EACT;AACF,CAAC;;;ACfD,SAAS,KAAAC,WAAS;AAGX,IAAM,iDACX,oBAAoB;AAAA,EAClB,cAAc;AAAA;AAAA,EACd,QAAQC,IACL,OAAO;AAAA,IACN,cAAcA,IAAE,QAAQ,KAAK,EAAE,QAAQ,KAAK;AAAA,EAC9C,CAAC,EACA;AAAA,IACC;AAAA,EACF;AAAA,EACF,YAAY;AACV,WAAO;AAAA,EACT;AACF,CAAC;;;AChBH,SAAS,KAAAC,WAAS;AAGX,IAAM,8BAA8B,oBAAoB;AAAA,EAC7D,cAAc;AAAA,EACd,QAAQC,IACL,OAAO;AAAA,IACN,cAAcA,IAAE,QAAQ,KAAK,EAAE,QAAQ,KAAK;AAAA,EAC9C,CAAC,EACA;AAAA,IACC;AAAA,EACF;AAAA,EACF,YAAY;AACV,WAAO;AAAA,EACT;AACF,CAAC;;;ACfD,SAAS,KAAAC,WAAS;AAGX,IAAM,WAAW,oBAAoB;AAAA,EAC1C,cAAc;AAAA,EACd,QAAQC,IACL,OAAO;AAAA,IACN,cAAcA,IAAE,QAAQ,IAAI,EAAE,QAAQ,IAAI;AAAA,IAC1C,MAAMA,IAAE,KAAK,CAAC,MAAM,IAAI,CAAC;AAAA,EAC3B,CAAC,EACA,SAAS,0CAA0C;AAAA,EACtD,UAAU,EAAE,KAAK,GAAG;AAClB,WAAO,MAAM,IAAI;AAAA,EACnB;AACF,CAAC;;;ACdD,SAAS,KAAAC,WAAS;AAGX,IAAM,yBAAyB,oBAAoB;AAAA,EACxD,cAAc;AAAA,EACd,QAAQC,IACL,OAAO;AAAA,IACN,cAAcA,IAAE,QAAQ,KAAK,EAAE,QAAQ,KAAK;AAAA,EAC9C,CAAC,EACA;AAAA,IACC;AAAA,EACF;AAAA,EACF,YAAY;AACV,WAAO;AAAA,EACT;AACF,CAAC;;;ACfD,SAAS,KAAAC,WAAS;AAEX,IAAM,kBAAkBA,IAC5B,OAAO;AAAA,EACN,cAAcA,IAAE,QAAQ,IAAI;AAAA,EAC5B,WAAWA,IAAE,OAAO;AACtB,CAAC,EACA,SAAS,8DAA8D;;;ACP1E,SAAS,KAAAC,WAAS;AAGX,IAAM,uBAAuB,oBAAoB;AAAA,EACtD,cAAc;AAAA,EACd,QAAQC,IAAE,OAAO;AAAA,IACf,cAAcA,IAAE,QAAQ,IAAI,EAAE,QAAQ,IAAI;AAAA,IAC1C,oBAAoBA,IACjB,MAAM,CAACA,IAAE,QAAQ,GAAG,EAAE,SAAS,uBAAuB,GAAGA,IAAE,QAAQ,GAAG,CAAC,CAAC,EACxE,SAAS,EACT,QAAQ,IAAI;AAAA,IACf,qBAAqBA,IAClB,MAAM;AAAA,MACLA,IAAE,QAAQ,GAAG,EAAE,SAAS,mBAAmB;AAAA,MAC3CA,IAAE,QAAQ,GAAG,EAAE,SAAS,sBAAsB;AAAA,IAChD,CAAC,EACA,QAAQ,GAAG;AAAA,IACd,kBAAkBA,IAAE,OAAO,EAAE,IAAI,EAAE,QAAQ,CAAC;AAAA,IAC5C,kBAAkBA,IAAE,OAAO,EAAE,IAAI,EAAE,QAAQ,CAAC;AAAA,IAC5C,kBAAkBA,IAAE,OAAO,EAAE,IAAI,EAAE,QAAQ,CAAC;AAAA,IAC5C,kBAAkBA,IAAE,OAAO,EAAE,IAAI,EAAE,QAAQ,CAAC;AAAA,EAC9C,CAAC;AAAA,EACD,WAAW,MAAM;AACf,WAAO;AAAA,EACT;AACF,CAAC;;;ACzBD,SAAS,KAAAC,WAAS;AAGX,IAAM,qBAAqB,oBAAoB;AAAA,EACpD,cAAc;AAAA,EACd,QAAQC,IACL,OAAO;AAAA,IACN,cAAcA,IAAE,QAAQ,IAAI,EAAE,QAAQ,IAAI;AAAA,IAC1C,UAAUA,IAAE,KAAK,CAAC,KAAK,GAAG,CAAC;AAAA,EAC7B,CAAC,EACA;AAAA,IACC;AAAA,EACF;AAAA,EACF,UAAU,EAAE,SAAS,GAAG;AACtB,WAAO,MAAM,QAAQ;AAAA,EACvB;AACF,CAAC;;;AChBD,SAAS,KAAAC,WAAS;AAIlB,IAAM,kBAAkBC,IAAE,OAAO;AAAA,EAC/B,wBAAwBA,IAAE,QAAQ,GAAG,EAAE,SAAS,QAAQ;AAAA,EACxD,UAAUA,IAAE,OAAO;AAAA,EACnB,eAAeA,IAAE,OAAO,EAAE,SAAS;AACrC,CAAC;AAED,IAAM,qBAAqBA,IAAE,OAAO;AAAA,EAClC,wBAAwBA,IAAE,QAAQ,GAAG,EAAE,SAAS,WAAW;AAAA,EAC3D,QAAQA,IAAE,OAAO;AAAA,EACjB,QAAQA,IAAE,OAAO;AAAA,EACjB,eAAeA,IAAE,OAAO,EAAE,SAAS;AACrC,CAAC;AAED,IAAM,mBAAmBA,IAAE,OAAO;AAAA,EAChC,wBAAwBA,IAAE,QAAQ,GAAG,EAAE,SAAS,SAAS;AAAA,EACzD,QAAQA,IAAE,OAAO;AAAA,EACjB,QAAQA,IAAE,OAAO;AAAA,EACjB,eAAeA,IAAE,OAAO,EAAE,SAAS;AACrC,CAAC;AAED,IAAM,mBAAmBA,IAAE,OAAO;AAAA,EAChC,wBAAwBA,IAAE,QAAQ,GAAG,EAAE,SAAS,SAAS;AAAA,EACzD,gBAAgBA,IAAE,OAAO;AAAA,EACzB,oBAAoBA,IAAE,OAAO,EAAE,IAAI;AAAA,EACnC,UAAUA,IAAE,OAAO,EAAE,SAAS;AAAA,EAC9B,eAAeA,IAAE,OAAO,EAAE,SAAS;AACrC,CAAC;AAED,IAAM,oCAAoCA,IAAE;AAAA,EAC1C;AAAA,EACA,CAAC,iBAAiB,oBAAoB,kBAAkB,gBAAgB;AAC1E;AAEA,IAAM,qBAAqBA,IAAE,OAAO;AAAA,EAClC,YAAYA,IAAE,QAAQ,UAAU;AAAA,EAChC,QAAQA,IAAE,OAAO;AAAA,EACjB,QAAQA,IAAE,OAAO;AAAA,EACjB,iBAAiBA,IAAE,OAAO;AAAA,EAC1B,sBAAsBA,IAAE,OAAO;AACjC,CAAC;AAED,IAAM,qBAAqBA,IAAE,OAAO;AAAA,EAClC,YAAYA,IAAE,QAAQ,UAAU;AAAA,EAChC,QAAQA,IAAE,OAAO;AAAA,EACjB,QAAQA,IAAE,OAAO;AAAA,EACjB,iBAAiBA,IAAE,OAAO;AAAA,EAC1B,sBAAsBA,IAAE,OAAO;AACjC,CAAC;AAED,IAAM,qBAAqBA,IAAE,OAAO;AAAA,EAClC,YAAYA,IAAE,QAAQ,WAAW;AAAA,EACjC,eAAeA,IAAE,OAAO;AAAA,EACxB,YAAYA,IAAE,OAAO;AAAA,EACrB,YAAYA,IAAE,OAAO;AAAA,EACrB,YAAYA,IAAE,OAAO;AAAA,EACrB,YAAYA,IAAE,OAAO;AAAA,EACrB,YAAYA,IAAE,OAAO;AAAA,EACrB,YAAYA,IAAE,OAAO;AAAA,EACrB,YAAYA,IAAE,OAAO;AAAA,EACrB,YAAYA,IAAE,OAAO;AACvB,CAAC;AAED,IAAM,iCAAiCA,IAAE,mBAAmB,cAAc;AAAA,EACxE;AAAA,EACA;AAAA,EACA;AACF,CAAC;AAED,IAAM,2BAA2BA,IAAE,MAAM;AAAA,EACvC;AAAA,EACA;AACF,CAAC;AAEM,IAAM,2BAA2B,oBAAoB;AAAA,EAC1D,cAAc;AAAA,EACd,QAAQ,yBAAyB;AAAA,IAC/BA,IAAE,OAAO;AAAA,MACP,cAAcA,IAAE,QAAQ,KAAK,EAAE,QAAQ,KAAK;AAAA,MAC5C,iBAAiBA,IAAE,OAAO,EAAE,IAAI;AAAA,IAClC,CAAC;AAAA,EACH;AAAA,EACA,UAAU,OAAO;AACf,QAAI,gBAAgB,OAAO;AACzB,YAAM,EAAE,iBAAiB,WAAW,IAAI;AACxC,UAAI,gBAAgB,OAAO,eAAe,GAAG,UAAU;AAEvD,UAAI,eAAe,cAAc,eAAe,YAAY;AAC1D,yBAAiB,GAAG,MAAM,OAAO,QAAQ,CAAC,CAAC,IAAI,MAAM,OAAO,QAAQ,CAAC,CAAC,IAAI,MAAM,gBAAgB,QAAQ,CAAC,CAAC,IAAI,MAAM,qBAAqB,QAAQ,CAAC,CAAC;AAAA,MACrJ,WAAW,eAAe,aAAa;AAErC,cAAM,IAAI,MAAM,qCAAqC;AAAA,MACvD;AAEA,uBAAiB;AACjB,aAAO;AAAA,IACT;AACA,QAAI,4BAA4B,OAAO;AACrC,YAAM,EAAE,iBAAiB,uBAAuB,IAAI;AACpD,UAAI,gBAAgB,OAAO,eAAe,GAAG,sBAAsB;AAEnE,UAAI,2BAA2B,KAAK;AAClC,yBAAiB,GAAG,MAAM,SAAS,QAAQ,CAAC,CAAC;AAAA,MAC/C,WACE,2BAA2B,OAC3B,2BAA2B,KAC3B;AACA,yBAAiB,GAAG,MAAM,OAAO,QAAQ,CAAC,CAAC,IAAI,MAAM,OAAO,QAAQ,CAAC,CAAC;AAAA,MACxE,WAAW,2BAA2B,KAAK;AACzC,yBAAiB,GAAG,MAAM,cAAc,IAAI,MAAM,kBAAkB,IAClE,MAAM,WAAW,IAAI,MAAM,QAAQ,KAAK,EAC1C;AAAA,MACF;AAEA,UAAI,MAAM,eAAe;AACvB,yBAAiB,IAAI,MAAM,cAAc,QAAQ,CAAC,CAAC;AAAA,MACrD;AAEA,uBAAiB;AAEjB,aAAO;AAAA,IACT;AACA,UAAM,IAAI;AAAA,MACR,qCAAqC,KAAK,UAAU,KAAK,CAAC;AAAA,IAC5D;AAAA,EACF;AACF,CAAC;;;ACjID,SAAS,KAAAC,WAAS;AAGX,IAAM,kBAAkB,oBAAoB;AAAA,EACjD,cAAc;AAAA,EACd,QAAQC,IAAE,OAAO;AAAA,IACf,cAAcA,IAAE,QAAQ,GAAG,EAAE,QAAQ,GAAG;AAAA,IACxC,iBAAiBA,IAAE,OAAO,EAAE,IAAI;AAAA,EAClC,CAAC;AAAA,EACD,UAAU,EAAE,gBAAgB,GAAG;AAC7B,WAAO,IAAI,eAAe;AAAA,EAC5B;AACF,CAAC;;;ACsBM,IAAM,qBAAqB;AAAA,EAChC;AAAA,EACA;AAAA,EACA;AAAA,EACA;AAAA,EACA;AAAA,EACA;AAAA,EACA;AAAA,EACA;AAAA,EACA;AAAA,EACA;AAAA,EACA;AAAA,EACA;AAAA,EACA;AAAA,EACA;AAAA;AAAA;AAAA,EAGA;AAAA;AAAA,EAEA;AAAA;AAAA;AAAA,EAGA;AAAA,EACA;AAAA,EACA;AAAA,EACA;AAAA,EACA;AAAA,EACA;AAAA,EACA;AAAA,EACA;AAAA;AAEF;;;AC7DO,IAAM,gBAAgB,MAAM,IAAI,cAAc;AAErD,IAAM,gBAAN,MAAoB;AAAA,EAClB;AAAA,EAEA,cAAc;AACZ,SAAK,WAAW,CAAC;AAAA,EACnB;AAAA,EAEA,IACE,WACA,IACe;AACf,QAAI,WAAW;AACb,aAAO,GAAG,IAAI;AAAA,IAChB;AACA,WAAO;AAAA,EACT;AAAA,EAEA,IACE,KACA,OACe;AACf,SAAK,SAAS,KAAK;AAAA,MACjB,GAAI,EAAE,cAAc,mBAAmB,GAAG,EAAE,aAAa;AAAA,MACzD,GAAG;AAAA,IACL,CAAC;AACD,WAAO;AAAA,EACT;AAAA,EAEA,QAAiC;AAC/B,WAAO,KAAK;AAAA,EACd;AACF;;;AClCO,IAAM,yBAAyB,CAAC,YAAsC;AAC3E,QAAM,cAAc,OAAO,OAAO,kBAAkB,EAAE;AAAA,IACpD,CAAC,QAAQ,IAAI,iBAAiB,QAAQ;AAAA,EACxC;AAEA,MAAI,CAAC,aAAa;AAChB,UAAM,IAAI;AAAA,MACR,6BAA6B,QAAQ,YAAY;AAAA,IACnD;AAAA,EACF;AAEA,MAAI,CAAC,YAAY,WAAW;AAC1B,UAAM,IAAI;AAAA,MACR,6BAA6B,QAAQ,YAAY;AAAA,IACnD;AAAA,EACF;AAEA,SAAO,YAAY,UAAU,OAAc;AAC7C;;;AClBO,IAAM,+BAA+B,CAC1C,kBAC2B;AAC3B,QAAM,2BAAmD,CAAC;AAC1D,aAAW,aAAa,OAAO,KAAK,aAAa,GAAG;AAClD,6BAAyB,SAAS,IAAI,cAAc,SAAS,EAC1D,IAAI,CAAC,YAAY;AAChB,aAAO,uBAAuB,OAAO;AAAA,IACvC,CAAC,EACA,KAAK,IAAI;AAAA,EACd;AACA,SAAO;AACT;;;ACZO,IAAM,0BAA0B,CACrC,aACW;AACX,SAAO,SACJ,IAAI,CAAC,YAAY;AAChB,WAAO,uBAAuB,OAAO;AAAA,EACvC,CAAC,EACA,KAAK,IAAI;AACd;;;ACRO,SAAS,MAAS,KAA8B;AACrD,QAAM,SAAwB,CAAC;AAC/B,WAAS,IAAI,GAAG,IAAI,IAAI,SAAS,GAAG,KAAK;AACvC,WAAO,KAAK,CAAC,IAAI,CAAC,GAAG,IAAI,IAAI,CAAC,CAAC,CAAC;AAAA,EAClC;AACA,SAAO;AACT;;;ACNO,IAAM,qBAAqB,CAAC,WAAoC;AACrE,SAAO;AAAA,IACL,GAAG,cAAc,EACd,IAAI,WAAW,EAAE,SAAS,wBAAwB,CAAC,EACnD,IAAI,kCAAkC;AAAA,MACrC,YAAY;AAAA,MACZ,eAAe;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA,EAYrB,KAAK;AAAA,IACD,CAAC,EACA,IAAI,kCAAkC;AAAA,MACrC,YAAY;AAAA,MACZ,eAAe;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA,EAWrB,KAAK;AAAA,IACD,CAAC,EACA,IAAI,kCAAkC;AAAA,MACrC,YAAY;AAAA,MACZ,eAAe;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA,EAgBrB,KAAK;AAAA,IACD,CAAC,EACA,IAAI,WAAW,EAAE,SAAS,sBAAsB,CAAC,EACjD,MAAM;AAAA,EACX;AACF;;;AClDA,OAAO,qBAAqB;;;ACTrB,SAAS,kBACd,MAC4B;AAC5B,QAAM,aAAa,KAAK;AAAA,IACtB,CAAC,QAAyB,IAAI,SAAS;AAAA,EACzC;AAEA,QAAM,SAAwC,CAAC;AAE/C,aAAW,SAAS,YAAY;AAC9B,eAAW,WAAW,MAAM,OAAO;AACjC,UAAI,QAAQ,eAAe,QAAQ;AACjC,eAAO,QAAQ,KAAK,IAAI,OAAO,QAAQ,KAAK,KAAK,oBAAI,IAAY;AACjE,eAAO,QAAQ,KAAK,EAAE,IAAI,QAAQ,KAAK;AAAA,MACzC;AAAA,IACF;AAAA,EACF;AAEA,SAAO;AAAA,IACL,KAAK,MAAM,KAAK,OAAO,OAAO,CAAC,CAAC;AAAA,IAChC,QAAQ,MAAM,KAAK,OAAO,UAAU,CAAC,CAAC;AAAA,IACtC,QAAQ,MAAM,KAAK,OAAO,UAAU,CAAC,CAAC;AAAA,IACtC,QAAQ,MAAM,KAAK,OAAO,UAAU,CAAC,CAAC;AAAA,IACtC,QAAQ,MAAM,KAAK,OAAO,UAAU,CAAC,CAAC;AAAA,IACtC,QAAQ,MAAM,KAAK,OAAO,UAAU,CAAC,CAAC;AAAA,IACtC,QAAQ,MAAM,KAAK,OAAO,UAAU,CAAC,CAAC;AAAA,IACtC,QAAQ,MAAM,KAAK,OAAO,UAAU,CAAC,CAAC;AAAA,EACxC;AACF;;;ADXA,IAAM,iCAAiC,CACrC,gBACa;AACb,MAAI,YAAY,WAAW,IAAI,EAAG,QAAO;AACzC,MAAI,YAAY,WAAW,IAAI,EAAG,QAAO;AAEzC,QAAM,kBAAkB,YAAY,MAAM,aAAa;AACvD,MAAI,gBAAiB,QAAO,QAAQ,gBAAgB,CAAC,CAAC;AAEtD,QAAM,IAAI,MAAM,kCAAkC,WAAW,EAAE;AACjE;AAEO,SAAS,wBAAwB;AAAA,EACtC;AAAA,EACA;AAAA,EACA;AACF,GAIG;AACD,QAAM,wBAAwB,MAAM;AAClC,UAAM,0BAA0B,OAAO,OAAO,CAAC,KAAK,YAAY;AAC9D,UAAI,QAAQ,iBAAiB,OAAO;AAClC,eAAO,KAAK,IAAI,KAAK,QAAQ,eAAe;AAAA,MAC9C;AACA,aAAO;AAAA,IACT,GAAG,CAAC;AACJ,QAAI,4BAA4B,GAAG;AACjC,aAAO;AAAA,IACT;AACA,WAAO,0BAA0B;AAAA,EACnC;AAEA,SAAO;AAAA,IACL,GAAG,cAAc,EACd,IAAI,WAAW,EAAE,SAAS,sBAAsB,CAAC,EACjD,MAAM;AAAA,EACX;AAGA,QAAM,cAA0C,kBAAkB,WAAW;AAC7E,QAAM,WAAW,+BAA+B,WAAW;AAC3D,aAAW,SAAS,YAAY,QAAQ,GAAG;AACzC,WAAO;AAAA,MACL,GAAG,cAAc,EACd,IAAI,4BAA4B;AAAA,QAC/B,iBAAiB,sBAAsB;AAAA,QACvC,wBAAwB;AAAA,QACxB,UAAU;AAAA,MACZ,CAAC,EACA,MAAM;AAAA,IACX;AAAA,EACF;AAGA,QAAM,kBAAkB,sCAAsC;AAAA,IAC5D;AAAA,IACA,OAAO;AAAA,IACP;AAAA,EACF,CAAC;AAED,aAAW,kBAAkB,iBAAiB;AAC5C,WAAO;AAAA,MACL,GAAG,cAAc,EACd,IAAI,4BAA4B;AAAA,QAC/B,iBAAiB,sBAAsB;AAAA,QACvC,GAAG;AAAA,MACL,CAAC,EACA,MAAM;AAAA,IACX;AAAA,EACF;AAEA,SAAO;AAAA,IACL,GAAG,cAAc,EACd,IAAI,oBAAoB,CAAC,CAAC,EAC1B,IAAI,WAAW,EAAE,SAAS,oBAAoB,CAAC,EAC/C,MAAM;AAAA,EACX;AACF;AAEO,IAAM,iCAAiC,CAC5C,QAC2B;AAC3B,MAAI,IAAI,UAAU,QAAQ;AACxB,WAAO;AAAA,MACL,wBAAwB;AAAA,MACxB,QAAQ,IAAI;AAAA,MACZ,QAAQ,IAAI;AAAA,IACd;AAAA,EACF;AACA,MAAI,IAAI,UAAU,UAAU;AAC1B,WAAO;AAAA,MACL,wBAAwB;AAAA,MACxB,UAAU,IAAI,SAAS;AAAA,IACzB;AAAA,EACF;AACA,MAAI,IAAI,UAAU,gBAAgB;AAEhC,WAAO;AAAA,MACL,wBAAwB;AAAA,MACxB,QAAQ,IAAI;AAAA,MACZ,QAAQ,IAAI;AAAA,IACd;AAAA,EACF;AACA,MAAI,IAAI,UAAU,WAAW;AAE3B,UAAM,IAAI,MAAM,sDAAsD;AAAA,EACxE;AACA,QAAM,IAAI,MAAM,qBAAsB,IAAY,KAAK,EAAE;AAC3D;AAEO,IAAM,2CAA2C,CACtD,QAC2B;AAC3B,MAAI,mBAAmB;AACvB,MAAI,uBAAuB,OAAO,OAAO,IAAI,sBAAsB,UAAU;AAC3E,uBAAmB,IAAI;AAAA,EACzB;AAEA,MAAI,IAAI,UAAU,QAAQ;AACxB,WAAO;AAAA,MACL,wBAAwB;AAAA,MACxB,QAAQ,IAAI,QAAQ,mBAAmB;AAAA,MACvC,QAAQ,IAAI,SAAS,mBAAmB;AAAA,IAC1C;AAAA,EACF;AACA,MAAI,IAAI,UAAU,UAAU;AAC1B,WAAO;AAAA,MACL,wBAAwB;AAAA,MACxB,UAAU,IAAI,SAAS,IAAI,mBAAmB;AAAA,IAChD;AAAA,EACF;AACA,MAAI,IAAI,UAAU,gBAAgB;AAChC,WAAO;AAAA,MACL,wBAAwB;AAAA,MACxB,QAAQ,IAAI,QAAQ,mBAAmB;AAAA,MACvC,QAAQ,IAAI,SAAS,mBAAmB;AAAA,IAC1C;AAAA,EACF;AACA,MAAI,IAAI,UAAU,WAAW;AAC3B,UAAM,IAAI,MAAM,sDAAsD;AAAA,EACxE;AACA,QAAM,IAAI,MAAM,qBAAsB,IAAY,KAAK,EAAE;AAC3D;AAEO,IAAM,yCAAyC,CACpD,QAC2B;AAC3B,MAAI,kBAAkB,KAAK;AACzB,WAAO;AAAA,MACL,wBAAwB;AAAA,MACxB,UAAU,IAAI;AAAA,IAChB;AAAA,EACF;AACA,QAAM,IAAI,MAAM,6BAA6B,GAAU,EAAE;AAC3D;AAEO,IAAM,yCAAyC,CACpD,QAC2B;AAC3B,MAAI,eAAe,KAAK;AACtB,WAAO;AAAA,MACL,wBAAwB;AAAA,MACxB,UAAU,IAAI,YAAY;AAAA;AAAA,IAC5B;AAAA,EACF;AACA,QAAM,IAAI,MAAM,0BAA0B,GAAU,EAAE;AACxD;AAEO,IAAM,qCAAqC,CAChD,QAC2B;AAC3B,MAAI,eAAe,KAAK;AACtB,WAAO;AAAA,MACL,wBAAwB;AAAA,MACxB,UAAU,IAAI,YAAY;AAAA;AAAA,IAC5B;AAAA,EACF;AACA,QAAM,IAAI,MAAM,0BAA0B,GAAU,EAAE;AACxD;AAEO,IAAM,sCAAsC,CACjD,QAC2B;AAC3B,MAAI,IAAI,UAAU,QAAQ;AACxB,WAAO;AAAA,MACL,wBAAwB;AAAA,MACxB,QAAQ,IAAI;AAAA,MACZ,QAAQ,IAAI;AAAA,IACd;AAAA,EACF;AACA,MAAI,IAAI,UAAU,gBAAgB;AAEhC,WAAO;AAAA,MACL,wBAAwB;AAAA,MACxB,QAAQ,IAAI;AAAA,MACZ,QAAQ,IAAI;AAAA,IACd;AAAA,EACF;AACA,MAAI,IAAI,UAAU,UAAU;AAC1B,WAAO;AAAA,MACL,wBAAwB;AAAA,MACxB,UAAU,IAAI,SAAS;AAAA,IACzB;AAAA,EACF;AACA,MAAI,IAAI,UAAU,QAAQ;AACxB,QAAI,EAAE,WAAW,OAAO,YAAY,MAAM;AACxC,YAAM,IAAI;AAAA,QACR;AAAA,MACF;AAAA,IACF;AACA,QAAI,IAAI,SAAS,IAAI,QAAQ;AAC3B,aAAO;AAAA,QACL,YAAY;AAAA,QACZ,QAAQ,IAAI;AAAA,QACZ,QAAQ,IAAI;AAAA,QACZ,iBAAiB,KAAK,IAAI,IAAI,OAAO,IAAI,MAAM;AAAA,QAC/C,sBAAsB,IAAI,QAAQ;AAAA,MACpC;AAAA,IACF;AACA,WAAO;AAAA,MACL,YAAY;AAAA,MACZ,QAAQ,IAAI;AAAA,MACZ,QAAQ,IAAI;AAAA,MACZ,iBAAiB,KAAK,IAAI,IAAI,OAAO,IAAI,MAAM;AAAA,MAC/C,sBAAsB,IAAI,SAAS;AAAA,IACrC;AAAA,EACF;AACA,QAAM,IAAI,MAAM,qBAAsB,IAAY,KAAK,EAAE;AAC3D;AAEO,IAAM,qCAAqC,CAChD,QAC2B;AAC3B,MAAI,IAAI,UAAU,UAAU;AAC1B,QAAI,EAAE,oBAAoB,OAAO,mBAAmB,MAAM;AACxD,YAAM,IAAI;AAAA,QACR;AAAA,MACF;AAAA,IACF;AACA,WAAO;AAAA,MACL,wBAAwB;AAAA,MACxB,UAAU,IAAI;AAAA,IAChB;AAAA,EACF;AACA,MAAI,IAAI,UAAU,QAAQ;AACxB,QAAI,EAAE,iBAAiB,OAAO,kBAAkB,MAAM;AACpD,YAAM,IAAI;AAAA,QACR;AAAA,MACF;AAAA,IACF;AAEA,QAAI,IAAI,cAAc,IAAI,cAAc;AACtC,aAAO;AAAA,QACL,YAAY;AAAA,QACZ,QAAQ,IAAI;AAAA,QACZ,QAAQ,IAAI;AAAA,QACZ,iBAAiB,KAAK,IAAI,IAAI,aAAa,IAAI,YAAY;AAAA,QAC3D,sBAAsB,IAAI,cAAc;AAAA,MAC1C;AAAA,IACF;AACA,WAAO;AAAA,MACL,YAAY;AAAA,MACZ,QAAQ,IAAI;AAAA,MACZ,QAAQ,IAAI;AAAA,MACZ,iBAAiB,KAAK,IAAI,IAAI,aAAa,IAAI,YAAY;AAAA,MAC3D,sBAAsB,IAAI,eAAe;AAAA,IAC3C;AAAA,EACF;AACA,QAAM,QAAQ,IAAI;AAClB,MACE,UAAU,iCACV,UAAU,6BACV,UAAU,mCACV;AACA,QAAI,EAAE,oBAAoB,OAAO,qBAAqB,MAAM;AAC1D,YAAM,IAAI;AAAA,QACR,WAAW,KAAK;AAAA,MAClB;AAAA,IACF;AACA,WAAO;AAAA,MACL,wBAAwB;AAAA,MACxB,QAAQ,IAAI;AAAA,MACZ,QAAQ,IAAI;AAAA,IACd;AAAA,EACF;AACA,QAAM,IAAI;AAAA,IACR,4DAA4D,IAAI,KAAK;AAAA,EACvE;AACF;AAEO,IAAM,+CAA+C,CAC1D,QAC2B;AAC3B,MAAI,mBAAmB;AACvB,MAAI,uBAAuB,OAAO,OAAO,IAAI,sBAAsB,UAAU;AAC3E,uBAAmB,IAAI;AAAA,EACzB;AAEA,MAAI,IAAI,UAAU,UAAU;AAC1B,QAAI,EAAE,oBAAoB,OAAO,mBAAmB,MAAM;AACxD,YAAM,IAAI;AAAA,QACR;AAAA,MACF;AAAA,IACF;AACA,WAAO;AAAA,MACL,wBAAwB;AAAA,MACxB,UAAU,IAAI,iBAAiB,mBAAmB;AAAA,IACpD;AAAA,EACF;AAEA,MAAI,IAAI,UAAU,QAAQ;AACxB,QAAI,EAAE,iBAAiB,OAAO,kBAAkB,MAAM;AACpD,YAAM,IAAI;AAAA,QACR;AAAA,MACF;AAAA,IACF;AAEA,UAAM,aAAa,IAAI,cAAc,mBAAmB;AACxD,UAAM,cAAc,IAAI,eAAe,mBAAmB;AAE1D,QAAI,aAAa,aAAa;AAC5B,aAAO;AAAA,QACL,YAAY;AAAA,QACZ,QAAQ;AAAA,QACR,QAAQ;AAAA,QACR,iBAAiB,KAAK,IAAI,YAAY,WAAW;AAAA,QACjD,sBAAsB,aAAa;AAAA,MACrC;AAAA,IACF;AACA,WAAO;AAAA,MACL,YAAY;AAAA,MACZ,QAAQ;AAAA,MACR,QAAQ;AAAA,MACR,iBAAiB,KAAK,IAAI,YAAY,WAAW;AAAA,MACjD,sBAAsB,cAAc;AAAA,IACtC;AAAA,EACF;AAEA,QAAM,QAAQ,IAAI;AAClB,MACE,UAAU,iCACV,UAAU,6BACV,UAAU,mCACV;AACA,QAAI,EAAE,oBAAoB,OAAO,qBAAqB,MAAM;AAC1D,YAAM,IAAI;AAAA,QACR,WAAW,KAAK;AAAA,MAClB;AAAA,IACF;AACA,WAAO;AAAA,MACL,wBAAwB;AAAA,MACxB,QAAQ,IAAI,iBAAiB,mBAAmB;AAAA,MAChD,QAAQ,IAAI,kBAAkB,mBAAmB;AAAA,IACnD;AAAA,EACF;AAEA,QAAM,IAAI;AAAA,IACR,sEAAsE,IAAI,KAAK;AAAA,EACjF;AACF;AAEO,IAAM,qCAAqC,CAChD,QAC2B;AAC3B,MAAI,EAAE,mBAAmB,MAAM;AAC7B,UAAM,IAAI;AAAA,MACR,+DAA+D,IAAI,UAAU;AAAA,IAC/E;AAAA,EACF;AACA,SAAO;AAAA,IACL,wBAAwB;AAAA,IACxB,UAAU,IAAI;AAAA,EAChB;AACF;AAEO,IAAM,+CAA+C,CAC1D,QAC2B;AAC3B,MAAI,EAAE,mBAAmB,MAAM;AAC7B,UAAM,IAAI;AAAA,MACR,yEAAyE,IAAI,UAAU;AAAA,IACzF;AAAA,EACF;AACA,MAAI,mBAAmB;AACvB,MAAI,uBAAuB,OAAO,OAAO,IAAI,sBAAsB,UAAU;AAC3E,uBAAmB,IAAI;AAAA,EACzB;AACA,SAAO;AAAA,IACL,wBAAwB;AAAA,IACxB,UAAU,IAAI,gBAAgB,mBAAmB;AAAA,EACnD;AACF;AAEO,IAAM,qCAAqC,CAAC,QAErB;AAC5B,MAAI,OAAO,IAAI,mBAAmB,UAAU;AAC1C,UAAM,IAAI;AAAA,MACR;AAAA,IACF;AAAA,EACF;AACA,SAAO;AAAA,IACL,wBAAwB;AAAA,IACxB,UAAU,IAAI;AAAA,EAChB;AACF;AAEA,SAAS,sCAAsC;AAAA,EAC7C;AAAA,EACA;AAAA,EACA;AACF,GAI6B;AAC3B,QAAM,UAAoC,CAAC;AAC3C,QAAM,gBAAgB,oBAAI,IAAY;AACtC,QAAM,oBAAoB,YAAY,SAAS,OAAO;AAEtD,QAAM,iBAAiB,CAAC,WAAmC;AACzD,UAAM,OAAO,gBAAgB,MAAM;AACnC,QAAI,CAAC,cAAc,IAAI,IAAI,GAAG;AAC5B,cAAQ,KAAK,MAAM;AACnB,oBAAc,IAAI,IAAI;AAAA,IACxB;AAAA,EACF;AAEA,aAAW,OAAO,aAAa;AAC7B,QAAI,IAAI,SAAS,cAAc;AAC7B,UAAI,IAAI,UAAU,SAAS,IAAI,UAAU,WAAW;AAClD,YAAI,mBAAmB;AACrB,yBAAe,yCAAyC,GAAG,CAAC;AAAA,QAC9D,OAAO;AACL,yBAAe,+BAA+B,GAAG,CAAC;AAAA,QACpD;AAAA,MACF;AAAA,IACF,WAAW,IAAI,SAAS,oBAAoB;AAC1C,UAAI,IAAI,UAAU,OAAO;AACvB,uBAAe,oCAAoC,GAAG,CAAC;AACvD,YAAI,IAAI,UAAU,QAAQ;AACxB;AAAA,YACE,oCAAoC;AAAA,cAClC,GAAG;AAAA,cACH,OAAO,IAAI;AAAA,cACX,QAAQ,IAAI;AAAA,YACd,CAAC;AAAA,UACH;AAAA,QACF;AAAA,MACF;AAAA,IACF,WAAW,IAAI,SAAS,mBAAmB;AACzC,UAAI,IAAI,OAAO,SAAS,KAAK,GAAG;AAC9B,YACE,YAAY,SAAS,OAAO,KAC5B,IAAI,gCAAgC,MACpC;AACA;AAAA,QACF;AACA,YAAI,mBAAmB;AACrB,yBAAe,6CAA6C,GAAG,CAAC;AAAA,QAClE,OAAO;AACL,yBAAe,mCAAmC,GAAG,CAAC;AAAA,QACxD;AAAA,MACF;AAAA,IACF,WAAW,IAAI,SAAS,YAAY;AAClC,UACE,YAAY,SAAS,OAAO,KAC5B,IAAI,gCAAgC,MACpC;AACA;AAAA,MACF;AACA,UAAI,IAAI,eAAe,UAAU;AAC/B,YAAI,mBAAmB;AACrB,yBAAe,6CAA6C,GAAG,CAAC;AAAA,QAClE,OAAO;AACL,yBAAe,mCAAmC,GAAG,CAAC;AAAA,QACxD;AAAA,MACF;AACE,gBAAQ,KAAK,sDAAsD;AAAA,IACvE,WAAW,IAAI,SAAS,WAAW;AACjC,qBAAe,mCAAmC,GAAG,CAAC;AAAA,IACxD,WAAW,IAAI,SAAS,aAAa;AACnC,iBAAW,SAAS,IAAI,OAAO;AAC7B,YACE,MAAM,eAAe,SACrB,OAAO,MAAM,mBAAmB,aAC/B,MAAM,eAAe,SAAS,MAAM,aAAa,QAClD;AACA,yBAAe,mCAAmC,KAAK,CAAC;AAAA,QAC1D;AAAA,MACF;AAAA,IACF,WAAW,IAAI,SAAS;AACtB,qBAAe,uCAAuC,GAAG,CAAC;AAAA,aACnD,IAAI,SAAS;AACpB,qBAAe,uCAAuC,GAAG,CAAC;AAAA,aACnD,IAAI,SAAS,mBAAmB;AACvC,UAAI,IAAI,UAAU;AAChB,uBAAe,mCAAmC,GAAG,CAAC;AAAA,IAC1D;AAAA,EACF;AAEA,SAAO;AACT;;;AErgBO,IAAM,qBAAqB,CAChC,QACA,kBAKW;AACX,MAAI;AACJ,MAAI,iBAAiB,eAAe;AAClC,UAAM,cAAc,cAAc;AAClC,eAAW,OAAO;AAAA,MAChB,CAAC,YACC,4BAA4B,WAC5B,QAAQ,iBAAiB,SACzB,QAAQ,2BAA2B,OACnC,QAAQ,aAAa;AAAA,IACzB;AAAA,EACF,WACE,4BAA4B,iBAC5B,gBAAgB,eAChB;AACA,eAAW,OAAO;AAAA,MAChB,CAAC,YACC,QAAQ,iBAAiB,SACzB,OAAO,KAAK,aAAa,EAAE;AAAA,QACzB,CAAC,eACC,QAAQ,UAAwC,MAChD,cAAc,UAAwC;AAAA,MAC1D;AAAA,IACJ;AAAA,EACF;AAEA,MAAI,CAAC,UAAU;AAEb,UAAM,IAAI;AAAA,MACR,wCAAwC,KAAK,UAAU,aAAa,CAAC;AAAA,IACvE;AAAA,EACF;AACA,SAAO,SAAS;AAClB;;;AC9CA;AAAA,EACE,MAAQ;AAAA,EACR,SAAW;AAAA,EACX,MAAQ;AAAA,EACR,MAAQ;AAAA,EACR,SAAW;AAAA,IACT,OAAS;AAAA,IACT,QAAU;AAAA,IACV,gBAAgB;AAAA,IAChB,OAAS;AAAA,IACT,cAAc;AAAA,EAChB;AAAA,EACA,OAAS;AAAA,IACP;AAAA,EACF;AAAA,EACA,KAAO;AAAA,IACL,qBAAqB;AAAA,EACvB;AAAA,EACA,iBAAmB;AAAA,IACjB,kBAAkB;AAAA,IAClB,mBAAmB;AAAA,IACnB,cAAc;AAAA,IACd,eAAe;AAAA,IACf,gBAAgB;AAAA,IAChB,oBAAoB;AAAA,IACpB,UAAY;AAAA,IACZ,iBAAiB;AAAA,IACjB,gBAAgB;AAAA,IAChB,WAAa;AAAA,IACb,iBAAiB;AAAA,IACjB,UAAY;AAAA,IACZ,OAAS;AAAA,IACT,eAAe;AAAA,IACf,OAAS;AAAA,IACT,aAAa;AAAA,IACb,WAAa;AAAA,IACb,MAAQ;AAAA,EACV;AAAA,EACA,kBAAoB;AAAA,IAClB,YAAc;AAAA,IACd,WAAa;AAAA,IACb,gBAAgB;AAAA,EAClB;AAAA,EACA,cAAgB;AAAA,IACd,uBAAuB;AAAA,IACvB,8BAA8B;AAAA,IAC9B,yBAAyB;AAAA,EAC3B;AACF;;;AC3CA,IAAM,6BAA6B;AAAA,EACjC,cAAc;AAAA,EACd,kBAAkB;AAAA,EAClB,qBAAqB;AAAA,EACrB,kBAAkB;AAAA,EAClB,qBAAqB;AAAA,EACrB,aAAa;AAAA,EACb,gBAAgB;AAAA,EAChB,SAAS;AACX;AAEA,IAAM,uBAAuB,CAAC,OAAiB,sBAA8B;AAC3E,MAAI,UAAU,MAAO,QAAO;AAC5B,MAAI,UAAU,SAAU,QAAO;AAC/B,SAAO,OAAO,MAAM,QAAQ,SAAS,EAAE,CAAC,IAAI;AAC9C;AAiBO,IAAM,oBAAoB,CAAC,SAIR;AACxB,QAAM,oBAAoB,KAAK,qBAAqB;AACpD,MAAI;AACJ,MAAI,KAAK,eAAe,YAAY,KAAK,UAAU,WAAW;AAC5D,UAAM,cAAc,qBAAqB,KAAK,OAAO,iBAAiB;AACtE,UAAM,gBACJ,KAAK,UAAU,QAAQ,QAAQ,KAAK,UAAU,WAAW,QAAQ;AACnE,oBAAgB,WAAW,WAAW,IAAI,aAAa;AAAA,EACzD,OAAO;AACL,oBACE,2BACG,KAAK,aACF,GAAG,KAAK,KAAK,IAAI,KAAK,UAAU,KAChC,KAAK,KACX;AAAA,EACJ;AACA,SACE,cAAc,EACX,IAAI,yBAAyB;AAAA,IAC5B,gBAAgB;AAAA,IAChB,iBAAiB,oCAAoC,gBAAY,OAAO;AAAA,EAC1E,CAAC,EACA,IAAI,yBAAyB;AAAA,IAC5B,gBAAgB;AAAA,IAChB,kBAAiB,oBAAI,KAAK,GAAE,YAAY;AAAA,EAC1C,CAAC,EAKA,IAAI,yBAAyB;AAAA,IAC5B,gBAAgB;AAAA,IAChB,iBAAiB;AAAA,EACnB,CAAC,EACA,IAAI,yBAAyB;AAAA,IAC5B,gBAAgB;AAAA,IAChB,iBAAiB;AAAA,EACnB,CAAC,EACA;AAAA,IAAI,KAAK,UAAU;AAAA,IAAW,CAAC,OAC9B,GAAG,IAAI,yBAAyB;AAAA,MAC9B,gBAAgB;AAAA,MAChB,iBACE,KAAK,eAAe,eAAe,aAAa;AAAA,IACpD,CAAC;AAAA,EACH,EACC,IAAI,wBAAwB,CAAC,CAAC,EAC9B,IAAI,YAAY;AAAA,IACf,MAAM;AAAA,EACR,CAAC,EACA,IAAI,WAAW;AAAA,IACd,SAAS;AAAA,EACX,CAAC,EACA,IAAI,WAAW;AAAA,IACd,SAAS,wCAAuC,oBAAI,KAAK,GAAE,YAAY,CAAC;AAAA,EAC1E,CAAC,EACA,IAAI,+BAA+B,CAAC,CAAC,EACrC,IAAI,sBAAsB;AAAA,IACzB,UAAU;AAAA,EACZ,CAAC,EACA,IAAI,cAAc,CAAC,CAAC,EACpB,MAAM;AAEb;;;ACpGA,IAAM,yBAAyB;AAAA,EAC7B,KAAK;AAAA,EACL,QAAQ;AAAA,EACR,QAAQ;AAAA,EACR,QAAQ;AAAA,EACR,QAAQ;AAAA,EACR,QAAQ;AAAA,EACR,QAAQ;AAAA,EACR,QAAQ;AACV;AACA,IAAM,0BAA0B;AAAA,EAC9B,QAAQ;AAAA,EACR,YAAY;AAAA,EACZ,YAAY;AAAA,EACZ,MAAM;AAAA,EACN,OAAO;AACT;AAEO,IAAM,qBAAqB,CAChC,WACA,eACoB;AACpB,MAAI,cAAc,UAAW,QAAO;AACpC,MAAI,UAAU,WAAW,OAAO,KAAK,eAAe,UAAU;AAC5D,UAAM,IAAI,MAAM,eAAe,SAAS,+BAA+B;AAAA,EACzE;AACA,SAAO,GAAG,uBAAuB,SAAgD,CAAC,GAAG,wBAAwB,UAAU,CAAC;AAC1H;;;ACPA,SAAS,oBAAoB;AAC7B;AAAA,EACE;AAAA,EACA;AAAA,EACA;AAAA,EACA;AAAA,EACA;AAAA,OAEK;AAIP,IAAMC,iBAAgB,CAAC,gBAAqC;AAC1D,QAAM,QAAQ,YAAY,KAAK,CAAC,YAAY,QAAQ,SAAS,WAAW;AAGxE,QAAM,YAAY,OAAO,cAAc;AACvC,SAAO,KAAK,IAAI,GAAG,KAAK,IAAI,GAAG,SAAS,CAAC;AAC3C;AAEA,IAAM,oBAAoB,CAAC,eACzB,MAAM,KAAK,EAAE,QAAQ,aAAa,EAAE,GAAG,CAAC,GAAG,MAAM,QAAQ,IAAI,CAAC,EAAc;AAE9E,IAAM,0BAA0B,CAAC,aAAuB;AACtD,MAAI,CAAC,SAAS,WAAW,OAAO,GAAG;AACjC,UAAM,IAAI,MAAM,6BAA6B,QAAQ,EAAE;AAAA,EACzD;AACA,SAAO,KAAK,SAAS,QAAQ,SAAS,EAAE,CAAC;AAC3C;AAKO,IAAM,8BAA8B,CACzC,aACA,OAAkC,CAAC,MACN;AAC7B,OAAK,gBAAgB;AACrB,QAAM,WAAW,YAAY,KAAK,CAAC,MAAM,EAAE,SAAS,WAAW;AAC/D,QAAM,aAAaA,eAAc,WAAW;AAC5C,QAAM,iBAAiB,kBAAkB,UAAU;AACnD,QAAM,kBAAkB,CAAC,OAAO,GAAG,gBAAgB,QAAQ;AAC3D,QAAM,iBAAiB,CAAC,OAAO,QAAQ;AACvC,QAAM,UAAoC;AAAA,IACxC,MAAM,kBAAkB;AAAA,MACtB,OAAO;AAAA,MACP,YAAY;AAAA,MACZ,mBAAmB;AAAA,IACrB,CAAC;AAAA,IACD,cAAc,kBAAkB;AAAA,MAC9B,OAAO;AAAA,MACP,YAAY;AAAA,IACd,CAAC;AAAA,IACD,QAAQ,kBAAkB;AAAA,MACxB,OAAO;AAAA,MACP,YAAY;AAAA,IACd,CAAC;AAAA,IACD,SAAS,kBAAkB;AAAA,MACzB,OAAO;AAAA,MACP,YAAY;AAAA,IACd,CAAC;AAAA,IACD,MAAM,kBAAkB;AAAA,MACtB,OAAO;AAAA,MACP,YAAY;AAAA,MACZ,mBAAmB;AAAA,IACrB,CAAC;AAAA,IACD,cAAc,kBAAkB;AAAA,MAC9B,OAAO;AAAA,MACP,YAAY;AAAA,IACd,CAAC;AAAA,IACD,QAAQ,kBAAkB;AAAA,MACxB,OAAO;AAAA,MACP,YAAY;AAAA,IACd,CAAC;AAAA,IACD,SAAS,kBAAkB;AAAA,MACzB,OAAO;AAAA,MACP,YAAY;AAAA,IACd,CAAC;AAAA,IACD,WAAW,kBAAkB;AAAA,MAC3B,OAAO;AAAA,IACT,CAAC;AAAA,EACH;AAEA,aAAW,iBAAiB,gBAAgB;AAC1C,YAAQ,wBAAwB,aAAa,CAAC,IAAI,kBAAkB;AAAA,MAClE,OAAO;AAAA,MACP,YAAY;AAAA,MACZ,mBAAmB;AAAA,IACrB,CAAC;AAAA,EACH;AAEA,QAAM,yBAAyB,gBAAgB;AAAA,IAAI,CAAC,aAClD,mBAAmB,UAAU,QAAQ;AAAA,EACvC;AACA,QAAM,wBAAwB,eAAe,QAAQ,CAAC,aAAa;AAAA,IACjE,mBAAmB,UAAU,YAAY;AAAA,IACzC,mBAAmB,UAAU,OAAO;AAAA,IACpC,mBAAmB,UAAU,YAAY;AAAA,EAC3C,CAAC;AAED,aAAW,eAAe;AAAA,IACxB;AAAA,IACA,GAAG,uBAAuB,OAAO,CAAC,SAAS,SAAS,MAAM;AAAA,IAC1D,GAAG;AAAA,EACL,GAAY;AACV,UAAM,SAAS,QAAQ,WAAW;AAClC,uBAAmB,MAAM;AACzB,4BAAwB;AAAA,MACtB;AAAA,MACA;AAAA,MACA;AAAA,IACF,CAAC;AAAA,EACH;AAGA,UAAQ,UAAU;AAAA,IAChB,GAAG,cAAc,EACd,IAAI,4BAA4B;AAAA,MAC/B,iBAAiB;AAAA,MACjB,wBAAwB;AAAA,MACxB,UAAU;AAAA;AAAA,IACZ,CAAC,EACA,MAAM;AAAA,EACX;AAKA,QAAM,MAAM,CAAC,MAAe,KAAK,cAAc,CAAC,IAAI;AAEpD,QAAM,mBAAmB,CACvB,SACA,OACA,WACA,sBACG;AACH,QAAI,QAAQ,UAAU,MAAO;AAG7B,UAAM,mBAAmB;AACzB,UAAM,SAAS,QAAQ,mBAAmB,OAAO,SAAS,CAAC;AAC3D,UAAM,iBAAiB,kBAAkB,OAAO;AAChD,UAAM,SAAS,cAAc,EAAE,IAAI,mBAAmB;AAAA,MACpD,iBAAiB,mBAAmB,QAAQ,cAAc;AAAA,IAC5D,CAAC;AAED,QAAI,WAAW,QAAQ,gBAAgB;AACvC,QAAI,WAAW,QAAQ,gBAAgB;AACvC,UAAM,WAAW,QAAQ,YAAY;AACrC,UAAM,gBAAgB,WAAW;AACjC,UAAM,aAAa,WAAW;AAE9B,UAAM,YACJ,QAAQ,KAAK,MAAM,EAAE,EAAE,OAAO,CAAC,OAAe,SAAiB;AAC7D,UAAI,SAAS,KAAK;AAChB,eAAO,QAAQ,aAAa;AAAA,MAC9B;AACA,aAAO,QAAQ,WAAW;AAAA,IAC5B,GAAG,CAAC,IAAI;AAEV,UAAM,aAAa;AAEnB,UAAM,kBACJ,QAAQ,qBACP,MAKgB;AACf,YAAM,OAAO,QAAQ;AAMrB,UAAI,CAAC,KAAM,QAAO;AAClB,cAAQ,MAAM;AAAA,QACZ,KAAK;AACH,iBAAO;AAAA,QACT,KAAK;AACH,iBAAO;AAAA,QACT,KAAK;AACH,iBAAO;AAAA,QACT,KAAK;AACH,iBAAO;AAAA,MACX;AAAA,IACF,GAAG,KACH;AAEF,YAAQ,iBAAiB;AAAA,MACvB,KAAK;AACH;AAAA,MACF,KAAK;AACH,oBAAY,YAAY;AACxB;AAAA,MACF,KAAK;AACH,oBAAY;AACZ;AAAA,MACF,KAAK;AACH,oBAAY,aAAa;AACzB;AAAA,MACF,KAAK;AACH,oBAAY;AACZ,oBAAY,aAAa;AACzB;AAAA,MACF,KAAK;AACH,oBAAY;AACZ;AAAA,MACF,KAAK;AACH,oBAAY,YAAY;AACxB,oBAAY;AACZ;AAAA,MACF,KAAK;AACH,oBAAY;AACZ,oBAAY;AACZ;AAAA,MACF;AACE,oBAAY,YAAY;AACxB,oBAAY,aAAa;AACzB;AAAA,IACJ;AAEA,QAAI,YAAY;AAChB,UAAM,YAAY;AAElB,QAAI,WAAW,QAAQ,gBAAgB;AACvC,UAAM,KAAK,YAAY,YAAY;AACnC,UAAM,KAAK,YAAY,aAAa;AACpC,UAAM,aAAuB,CAAC;AAE9B,UAAM,eACJ,QAAQ,gBAAgB,SACpB,QAAQ,cACR,QAAQ,UAAU;AAExB,QAAI,cAAc;AAChB,iBAAW;AAAA,QACT,UAAU,IAAI,EAAE;AAAA,QAChB,EAAE,GAAG,IAAI,GAAG,GAAG,GAAG,GAAG,GAAG,GAAG,GAAG,GAAG,GAAG,EAAE;AAAA,QACtC,UAAU,CAAC,IAAI,CAAC,EAAE;AAAA,MACpB;AACA,iBAAW,CAAC;AAAA,IACd;AAEA,QAAI,UAAU;AACZ,YAAM,MAAO,WAAW,KAAK,KAAM;AACnC,iBAAW,KAAK,UAAU,IAAI,EAAE,GAAG,OAAO,GAAG,GAAG,UAAU,CAAC,IAAI,CAAC,EAAE,CAAC;AAAA,IACrE;AAEA,UAAM,kBACJ,WAAW,SAAS,IAAI,QAAQ,GAAG,UAAU,IAAI;AAEnD,UAAM,iBAAiB,CAAC,UACtB,kBAAkB,aAAa,iBAAiB,KAAK,IAAI;AAE3D,QAAI,cAAc,YAAY,QAAQ,aAAa;AACjD,YAAM,UAAU,QAAQ,oBAAoB;AAAA,QAC1C,MAAM;AAAA,QACN,OAAO;AAAA,QACP,KAAK;AAAA,QACL,QAAQ;AAAA,MACV;AAEA,YAAM,aAAa;AAAA,QACjB,EAAE,GAAG,WAAW,QAAQ,MAAM,GAAG,WAAW,QAAQ,IAAI;AAAA,QACxD;AAAA,UACE,GAAG,WAAW,YAAY,QAAQ;AAAA,UAClC,GAAG,WAAW,QAAQ;AAAA,QACxB;AAAA,QACA;AAAA,UACE,GAAG,WAAW,YAAY,QAAQ;AAAA,UAClC,GAAG,WAAW,aAAa,QAAQ;AAAA,QACrC;AAAA,QACA;AAAA,UACE,GAAG,WAAW,QAAQ;AAAA,UACtB,GAAG,WAAW,aAAa,QAAQ;AAAA,QACrC;AAAA,MACF,EAAE,IAAI,cAAc;AAEpB,aAAO;AAAA,QACL,GAAG,cAAc,EACd,IAAI,mBAAmB;AAAA,UACtB,iBAAiB,mBAAmB,QAAQ,cAAc;AAAA,QAC5D,CAAC,EACA,IAAI,0BAA0B,CAAC,CAAC,EAChC,IAAI,kBAAkB;AAAA,UACrB,GAAG,WAAW,CAAC,EAAE;AAAA,UACjB,GAAG,IAAI,WAAW,CAAC,EAAE,CAAC;AAAA,QACxB,CAAC,EACA,IAAI,kBAAkB;AAAA,UACrB,GAAG,WAAW,CAAC,EAAE;AAAA,UACjB,GAAG,IAAI,WAAW,CAAC,EAAE,CAAC;AAAA,QACxB,CAAC,EACA,IAAI,kBAAkB;AAAA,UACrB,GAAG,WAAW,CAAC,EAAE;AAAA,UACjB,GAAG,IAAI,WAAW,CAAC,EAAE,CAAC;AAAA,QACxB,CAAC,EACA,IAAI,kBAAkB;AAAA,UACrB,GAAG,WAAW,CAAC,EAAE;AAAA,UACjB,GAAG,IAAI,WAAW,CAAC,EAAE,CAAC;AAAA,QACxB,CAAC,EACA,IAAI,kBAAkB;AAAA,UACrB,GAAG,WAAW,CAAC,EAAE;AAAA,UACjB,GAAG,IAAI,WAAW,CAAC,EAAE,CAAC;AAAA,QACxB,CAAC,EACA,IAAI,wBAAwB,CAAC,CAAC,EAC9B,MAAM;AAAA,MACX;AAEA,aAAO;AAAA,QACL,GAAG,cAAc,EAAE,IAAI,sBAAsB,EAAE,UAAU,IAAI,CAAC,EAAE,MAAM;AAAA,MACxE;AAAA,IACF;AAEA,eAAW,QAAQ,QAAQ,KAAK,YAAY,GAAG;AAC7C,UAAI,SAAS,KAAK;AAChB,qBAAa,aAAa;AAC1B;AAAA,MACF;AAEA,YAAM,cAAc,aAAa,IAAI,KAAK,CAAC;AAC3C,iBAAW,QAAQ,aAAa;AAC9B,cAAM,KAAK,YAAY,KAAK,KAAK;AACjC,cAAM,KAAK,YAAY,KAAK,KAAK;AACjC,cAAM,KAAK,YAAY,KAAK,KAAK;AACjC,cAAM,KAAK,YAAY,KAAK,KAAK;AAEjC,cAAM,KAAK,eAAe,EAAE,GAAG,IAAI,GAAG,GAAG,CAAC;AAC1C,cAAM,KAAK,eAAe,EAAE,GAAG,IAAI,GAAG,GAAG,CAAC;AAE1C,eAAO,IAAI,kBAAkB,EAAE,GAAG,GAAG,GAAG,GAAG,IAAI,GAAG,CAAC,EAAE,CAAC;AACtD,eAAO,IAAI,kBAAkB,EAAE,GAAG,GAAG,GAAG,GAAG,IAAI,GAAG,CAAC,EAAE,CAAC;AAAA,MACxD;AAEA,mBAAa,WAAW;AAAA,IAC1B;AAEA,WAAO,KAAK,GAAG,OAAO,MAAM,CAAC;AAE7B,QAAI,cAAc,YAAY,QAAQ,aAAa;AACjD,aAAO;AAAA,QACL,GAAG,cAAc,EAAE,IAAI,sBAAsB,EAAE,UAAU,IAAI,CAAC,EAAE,MAAM;AAAA,MACxE;AAAA,IACF;AAAA,EACF;AAGA,QAAM,oBAAoB,CACxB,SACA,SAGG;AACH,QAAI,CAAC,QAAQ,KAAK,SAAS,WAAW,EAAG;AAEzC,YAAQ,IAAI,kBAAkB;AAAA,MAC5B,GAAG,KAAK,SAAS,CAAC,EAAE;AAAA,MACpB,GAAG,IAAI,KAAK,SAAS,CAAC,EAAE,CAAC;AAAA,IAC3B,CAAC;AAED,UAAM,gBAAgB,CAAC,GAAG,KAAK,UAAU,KAAK,SAAS,CAAC,CAAC;AAEzD,aAAS,IAAI,GAAG,IAAI,cAAc,SAAS,GAAG,KAAK;AACjD,YAAM,QAAQ,cAAc,CAAC;AAC7B,YAAM,MAAM,cAAc,IAAI,CAAC;AAE/B,UAAI,MAAM,SAAS,KAAK,IAAI,MAAM,KAAK,IAAI,MAAM;AAC/C,cAAM,SAAS,KAAK,cAAc,KAAK,KAAM,MAAM;AACnD,YAAI,QAAQ,GAAG;AAEb,kBAAQ,IAAI,kDAAkD,CAAC,CAAC;AAAA,QAClE,OAAO;AAEL,kBAAQ,IAAI,2CAA2C,CAAC,CAAC;AAAA,QAC3D;AAEA,cAAM,KAAK,EAAE,GAAG,MAAM,GAAG,GAAG,MAAM,EAAE;AACpC,cAAM,KAAK,EAAE,GAAG,IAAI,GAAG,GAAG,IAAI,EAAE;AAEhC,cAAM,KAAK,GAAG,IAAI,GAAG;AACrB,cAAM,KAAK,GAAG,IAAI,GAAG;AACrB,cAAM,IAAI,KAAK,KAAK,KAAK,KAAK,KAAK,EAAE;AAErC,YAAI,IAAI,MAAM;AACZ,kBAAQ,IAAI,+BAA+B,CAAC,CAAC;AAC7C,kBAAQ,IAAI,kBAAkB;AAAA,YAC5B,GAAG,IAAI;AAAA,YACP,GAAG,IAAI,IAAI,CAAC;AAAA,UACd,CAAC;AACD;AAAA,QACF;AAEA,cAAM,QAAQ,KAAK,IAAI,KAAK;AAC5B,cAAM,QAAQ,IAAI,KAAK,KAAK,KAAK;AACjC,YAAI,KAAK,IAAI,KAAK,IAAI,QAAQ,CAAC,CAAC,IAAI,MAAM;AACxC,kBAAQ,IAAI,+BAA+B,CAAC,CAAC;AAC7C,kBAAQ,IAAI,kBAAkB;AAAA,YAC5B,GAAG,IAAI;AAAA,YACP,GAAG,IAAI,IAAI,CAAC;AAAA,UACd,CAAC;AACD;AAAA,QACF;AACA,cAAM,IAAI,KAAK,IAAI,KAAK,IAAI,QAAQ,CAAC;AACrC,cAAM,SAAS,KAAK,KAAK,SAAS;AAClC,cAAM,MAAM,KAAK,MAAM,IAAI,EAAE;AAC7B,cAAM,cAAc,QAAQ,IAAI,QAAQ,CAAC;AACzC,cAAM,kBAAkB,MAAM;AAC9B,cAAM,KAAK,GAAG,IAAI,IAAI,KAAK,IAAI,eAAe;AAC9C,cAAM,KAAK,GAAG,IAAI,IAAI,KAAK,IAAI,eAAe;AAE9C,cAAM,WAAW,KAAK,GAAG;AACzB,cAAM,WAAW,KAAK,GAAG;AAEzB,gBAAQ,IAAI,kBAAkB;AAAA,UAC5B,GAAG,IAAI;AAAA,UACP,GAAG,IAAI,IAAI,CAAC;AAAA,UACZ,GAAG;AAAA,UACH,GAAG,KAAK,cAAc,CAAC,WAAW;AAAA,QACpC,CAAC;AAAA,MACH,OAAO;AAEL,gBAAQ,IAAI,+BAA+B,CAAC,CAAC;AAC7C,gBAAQ,IAAI,kBAAkB,EAAE,GAAG,IAAI,GAAG,GAAG,IAAI,IAAI,CAAC,EAAE,CAAC;AAAA,MAC3D;AAAA,IACF;AAAA,EACF;AAIA,QAAM,cAAc,CAAC,SAIhB;AACH,UAAM,EAAE,SAAS,IAAI;AACrB,QAAI,CAAC,YAAY,SAAS,WAAW,EAAG,QAAO,EAAE,UAAU,CAAC,EAAE;AAC9D,UAAM,IAAI,SAAS;AAEnB,UAAM,eAAe,CAAC,GAAG,QAAQ,EAAE,QAAQ;AAE3C,UAAM,eAAe,aAAa,IAAI,CAAC,IAAI,MAAM;AAC/C,YAAM,eAAe,IAAI,IAAI,IAAI,KAAK;AACtC,YAAM,QAAQ,SAAS,WAAW,EAAE;AACpC,aAAO,EAAE,GAAG,IAAI,OAAO,QAAQ,CAAC,QAAQ,OAAU;AAAA,IACpD,CAAC;AAED,WAAO,EAAE,UAAU,aAAa;AAAA,EAClC;AAOA,aAAW,SAAS,iBAAiB;AACnC,eAAW,WAAW,aAAa;AACjC,UAAI,QAAQ,SAAS,qBAAqB,UAAU,QAAQ,OAAO;AACjE,cAAM,gBAAgB,QAAQ,mBAAmB,OAAO,QAAQ,CAAC;AAGjE,cAAM,oBAAwC,CAAC;AAE/C,YAAI,QAAQ,UAAU,QAAQ;AAC5B,gBAAM,EAAE,WAAW,IAAI;AACvB,cAAI,CAAC,WAAY;AACjB,gBAAM,EAAE,YAAY,YAAY,IAAI;AAGpC,gBAAM,gBAAgB,cAAc,EACjC,IAAI,mBAAmB,EAAE,iBAAiB,GAAG,CAAC,EAC9C,IAAI,0BAA0B,CAAC,CAAC;AAEnC,4BAAkB,eAAe,YAAY,UAAU,CAAC;AAExD,wBAAc,IAAI,wBAAwB,CAAC,CAAC;AAC5C,4BAAkB,KAAK,GAAG,cAAc,MAAM,CAAC;AAI/C,cAAI,eAAe,YAAY,SAAS,GAAG;AAEzC,8BAAkB;AAAA,cAChB,GAAG,cAAc,EACd,IAAI,sBAAsB,EAAE,UAAU,IAAI,CAAC,EAC3C,MAAM;AAAA,YACX;AAEA,uBAAW,cAAc,aAAa;AACpC,oBAAM,gBAAgB,cAAc,EACjC,IAAI,mBAAmB,EAAE,iBAAiB,GAAG,CAAC,EAC9C,IAAI,0BAA0B,CAAC,CAAC;AAInC,gCAAkB,eAAe,UAAU;AAE3C,4BAAc,IAAI,wBAAwB,CAAC,CAAC;AAC5C,gCAAkB,KAAK,GAAG,cAAc,MAAM,CAAC;AAAA,YACjD;AAGA,8BAAkB;AAAA,cAChB,GAAG,cAAc,EACd,IAAI,sBAAsB,EAAE,UAAU,IAAI,CAAC,EAC3C,MAAM;AAAA,YACX;AAAA,UACF;AAAA,QACF,WAAW,QAAQ,UAAU,QAAQ;AACnC,gBAAM,EAAE,QAAQ,OAAO,QAAQ,SAAS,IAAI;AAC5C,gBAAM,IAAK,QAAmB;AAC9B,gBAAM,IAAK,SAAoB;AAE/B,gBAAM,SAAS;AAAA,YACb,EAAE,GAAG,CAAC,GAAG,GAAG,EAAE;AAAA;AAAA,YACd,EAAE,GAAG,GAAG,GAAG,EAAE;AAAA;AAAA,YACb,EAAE,GAAG,GAAG,GAAG,CAAC,EAAE;AAAA;AAAA,YACd,EAAE,GAAG,CAAC,GAAG,GAAG,CAAC,EAAE;AAAA;AAAA,UACjB;AAEA,cAAI,kBAAkB,SAAS;AAC/B,cAAI,UAAU;AACZ,kBAAM,YAAc,WAAsB,KAAK,KAAM;AACrD,8BAAkB,OAAO,SAAS;AAAA,UACpC;AACA,4BAAkB;AAAA,YAChB,UAAU,OAAO,GAAG,OAAO,CAAC;AAAA,YAC5B;AAAA,UACF;AAEA,gBAAM,oBAAoB,OAAO;AAAA,YAAI,CAAC,MACpC,aAAa,iBAAiB,CAAC;AAAA,UACjC;AAEA,gBAAM,eAAe,cAAc,EAChC,IAAI,mBAAmB,EAAE,iBAAiB,GAAG,CAAC,EAC9C,IAAI,0BAA0B,CAAC,CAAC;AAEnC,uBAAa,IAAI,kBAAkB;AAAA,YACjC,GAAG,kBAAkB,CAAC,EAAE;AAAA,YACxB,GAAG,IAAI,kBAAkB,CAAC,EAAE,CAAC;AAAA,UAC/B,CAAC;AACD,mBAAS,IAAI,GAAG,IAAI,kBAAkB,QAAQ,KAAK;AACjD,yBAAa,IAAI,kBAAkB;AAAA,cACjC,GAAG,kBAAkB,CAAC,EAAE;AAAA,cACxB,GAAG,IAAI,kBAAkB,CAAC,EAAE,CAAC;AAAA,YAC/B,CAAC;AAAA,UACH;AACA,uBAAa,IAAI,kBAAkB;AAAA,YACjC,GAAG,kBAAkB,CAAC,EAAE;AAAA,YACxB,GAAG,IAAI,kBAAkB,CAAC,EAAE,CAAC;AAAA,UAC/B,CAAC;AAED,uBAAa,IAAI,wBAAwB,CAAC,CAAC;AAC3C,4BAAkB,KAAK,GAAG,aAAa,MAAM,CAAC;AAAA,QAChD,WAAW,QAAQ,UAAU,WAAW;AACtC,gBAAM,EAAE,OAAO,IAAI;AACnB,cAAI,OAAO,SAAS,GAAG;AACrB,kBAAM,eAAe,cAAc,EAChC,IAAI,mBAAmB,EAAE,iBAAiB,GAAG,CAAC,EAC9C,IAAI,0BAA0B,CAAC,CAAC;AAEnC,yBAAa,IAAI,kBAAkB;AAAA,cACjC,GAAG,OAAO,CAAC,EAAE;AAAA,cACb,GAAG,IAAI,OAAO,CAAC,EAAE,CAAC;AAAA,YACpB,CAAC;AACD,qBAAS,IAAI,GAAG,IAAI,OAAO,QAAQ,KAAK;AACtC,2BAAa,IAAI,kBAAkB;AAAA,gBACjC,GAAG,OAAO,CAAC,EAAE;AAAA,gBACb,GAAG,IAAI,OAAO,CAAC,EAAE,CAAC;AAAA,cACpB,CAAC;AAAA,YACH;AACA,yBAAa,IAAI,kBAAkB;AAAA,cACjC,GAAG,OAAO,CAAC,EAAE;AAAA,cACb,GAAG,IAAI,OAAO,CAAC,EAAE,CAAC;AAAA,YACpB,CAAC;AAED,yBAAa,IAAI,wBAAwB,CAAC,CAAC;AAC3C,8BAAkB,KAAK,GAAG,aAAa,MAAM,CAAC;AAAA,UAChD;AAAA,QACF;AAEA,sBAAc,KAAK,GAAG,iBAAiB;AAEvC,YAAI,QAAQ,6BAA6B,OAAO;AAC9C,gBAAM,aAAa,QAAQ,mBAAmB,OAAO,YAAY,CAAC;AAClE,qBAAW,KAAK,GAAG,iBAAiB;AAAA,QACtC;AAAA,MACF;AAAA,IACF;AAAA,EACF;AAGA,aAAW,SAAS,CAAC,GAAG,iBAAiB,SAAS,GAAY;AAC5D,eAAW,WAAW,aAAa;AACjC,UAAI,QAAQ,SAAS,aAAa;AAChC,cAAM,EAAE,MAAM,IAAI;AAClB,mBAAW,CAAC,GAAG,CAAC,KAAK,MAAM,KAAK,GAAG;AAKjC,cAAI,EAAE,eAAe,QAAQ;AAC3B,gBAAI,EAAE,UAAU,OAAO;AACrB,oBAAM,SAAS,QAAQ,mBAAmB,OAAO,QAAQ,CAAC;AAC1D,qBAAO;AAAA,gBACL,GAAG,cAAc,EACd,IAAI,mBAAmB;AAAA,kBACtB,iBAAiB,mBAAmB,QAAQ;AAAA,oBAC1C,aAAa,EAAE;AAAA,kBACjB,CAAC;AAAA,gBACH,CAAC,EACA,IAAI,kBAAkB,EAAE,GAAG,EAAE,GAAG,GAAG,IAAI,EAAE,CAAC,EAAE,CAAC,EAC7C,IAAI,kBAAkB,EAAE,GAAG,EAAE,GAAG,GAAG,IAAI,EAAE,CAAC,EAAE,CAAC,EAC7C,MAAM;AAAA,cACX;AAAA,YACF;AAAA,UACF,WAAW,EAAE,eAAe,SAAS,EAAE,eAAe,QAAQ;AAC5D,gBAAI,EAAE,UAAU,OAAO;AACrB,oBAAM,SAAS,QAAQ,mBAAmB,OAAO,QAAQ,CAAC;AAC1D,qBAAO;AAAA,gBACL,GAAG,cAAc,EACd,IAAI,mBAAmB;AAAA,kBACtB,iBAAiB,mBAAmB,QAAQ;AAAA,oBAC1C,aAAa,EAAE;AAAA,kBACjB,CAAC;AAAA,gBACH,CAAC,EACA,IAAI,kBAAkB,EAAE,GAAG,EAAE,GAAG,GAAG,IAAI,EAAE,CAAC,EAAE,CAAC,EAC7C,IAAI,kBAAkB,EAAE,GAAG,EAAE,GAAG,GAAG,IAAI,EAAE,CAAC,EAAE,CAAC,EAC7C,MAAM;AAAA,cACX;AAAA,YACF;AAAA,UACF;AAAA,QACF;AACA,mBAAW,SAAS,OAAO;AACzB,cACE,MAAM,eAAe,SACrB,OAAO,MAAM,mBAAmB,aAC/B,MAAM,eAAe,SAAS,MAAM,aAAa,QAClD;AACA,kBAAM,SAAS,QAAQ,mBAAmB,OAAO,QAAQ,CAAC;AAC1D,mBAAO;AAAA,cACL,GAAG,cAAc,EACd,IAAI,mBAAmB;AAAA,gBACtB,iBAAiB;AAAA,kBACf;AAAA,kBACA,mCAAmC,KAAK;AAAA,gBAC1C;AAAA,cACF,CAAC,EACA,IAAI,mBAAmB,EAAE,GAAG,MAAM,GAAG,GAAG,IAAI,MAAM,CAAC,EAAE,CAAC,EACtD,MAAM;AAAA,YACX;AAAA,UACF;AAAA,QACF;AAAA,MACF,WACE,QAAQ,SAAS,yBACjB,eAAe,SAAS,KAAY,GACpC;AACA,YAAI,QAAQ,UAAU,OAAO;AAC3B,gBAAM,SAAS,QAAQ,mBAAmB,OAAO,YAAY,CAAC;AAC9D,gBAAM,iBAAiB,uCAAuC,OAAO;AACrE,gBAAM,SAAS,cAAc,EAAE,IAAI,mBAAmB;AAAA,YACpD,iBAAiB,mBAAmB,QAAQ,cAAc;AAAA,UAC5D,CAAC;AAED,cAAI,QAAQ,MAAM,SAAS,GAAG;AAC5B,mBAAO,IAAI,kBAAkB;AAAA,cAC3B,GAAG,QAAQ,MAAM,CAAC,EAAE;AAAA,cACpB,GAAG,IAAI,QAAQ,MAAM,CAAC,EAAE,CAAC;AAAA,YAC3B,CAAC;AAAA,UACH;AAGA,mBAAS,IAAI,GAAG,IAAI,QAAQ,MAAM,QAAQ,KAAK;AAC7C,mBAAO,IAAI,kBAAkB;AAAA,cAC3B,GAAG,QAAQ,MAAM,CAAC,EAAE;AAAA,cACpB,GAAG,IAAI,QAAQ,MAAM,CAAC,EAAE,CAAC;AAAA,YAC3B,CAAC;AAAA,UACH;AAEA,iBAAO,KAAK,GAAG,OAAO,MAAM,CAAC;AAAA,QAC/B;AAAA,MACF,WACE,QAAQ,SAAS,yBACjB,eAAe,SAAS,KAAY,GACpC;AACA;AAAA,UACE;AAAA,UACA;AAAA,UACA;AAAA,UACA;AAAA,QACF;AAAA,MACF,WAAW,QAAQ,SAAS,qBAAqB,UAAU,WAAW;AACpE;AAAA,UACE;AAAA,UACA;AAAA,UACA;AAAA,UACA;AAAA,QACF;AAAA,MACF,WAAW,QAAQ,SAAS,gBAAgB,QAAQ,UAAU,WAAW;AACvE,YAAI,QAAQ,UAAU,SAAS,eAAe,SAAS,KAAY,GAAG;AACpE,qBAAW,EAAE,QAAQ,eAAe,KAAK;AAAA,YACvC;AAAA,cACE,QAAQ,QAAQ,mBAAmB,OAAO,QAAQ,CAAC;AAAA,cACnD,gBAAgB,+BAA+B,OAAO;AAAA,YACxD;AAAA,YACA;AAAA,cACE,QAAQ,QAAQ,mBAAmB,OAAO,YAAY,CAAC;AAAA,cACvD,gBAAgB,yCAAyC,OAAO;AAAA,YAClE;AAAA,UACF,GAAG;AACD,kBAAM,iBAAiB,mBAAmB,QAAQ,cAAc;AAChE,kBAAM,KAAK,cAAc,EAAE,IAAI,mBAAmB;AAAA,cAChD,iBAAiB;AAAA,YACnB,CAAC;AAED,gBAAI,QAAQ,UAAU,kBAAkB,QAAQ,cAAc;AAC5D,iBAAG,IAAI,iBAAiB;AAAA,gBACtB,kBAAkB,QAAQ;AAAA,cAC5B,CAAC;AAAA,YACH;AAEA,eAAG,IAAI,mBAAmB,EAAE,GAAG,QAAQ,GAAG,GAAG,IAAI,QAAQ,CAAC,EAAE,CAAC;AAE7D,gBAAI,QAAQ,UAAU,kBAAkB,QAAQ,cAAc;AAE5D,iBAAG,IAAI,iBAAiB,EAAE,kBAAkB,EAAE,CAAC;AAAA,YACjD;AAEA,mBAAO,KAAK,GAAG,GAAG,MAAM,CAAC;AAAA,UAC3B;AAAA,QACF;AAAA,MACF,WAAW,QAAQ,SAAS,gBAAgB,QAAQ,UAAU,WAAW;AACvE,YAAI,QAAQ,UAAU,SAAS,eAAe,SAAS,KAAY,GAAG;AACpE,gBAAM,mBAAmB;AAAA,YACvB,QAAQ,mBAAmB,OAAO,QAAQ,CAAC;AAAA,UAC7C;AAEA,cAAI,QAAQ,gCAAgC,MAAM;AAChD,6BAAiB;AAAA,cACf,QAAQ,mBAAmB,OAAO,YAAY,CAAC;AAAA,YACjD;AAAA,UACF;AAEA,qBAAW,UAAU,kBAAkB;AACrC,kBAAM,cAAc,cAAc,EAC/B,IAAI,mBAAmB,EAAE,iBAAiB,GAAG,CAAC,EAC9C,IAAI,0BAA0B,CAAC,CAAC;AAEnC,kBAAM,EAAE,OAAO,IAAI;AACnB,gBAAI,UAAU,OAAO,SAAS,GAAG;AAC/B,0BAAY,IAAI,kBAAkB;AAAA,gBAChC,GAAG,OAAO,CAAC,EAAE;AAAA,gBACb,GAAG,IAAI,OAAO,CAAC,EAAE,CAAC;AAAA,cACpB,CAAC;AACD,uBAAS,IAAI,GAAG,IAAI,OAAO,QAAQ,KAAK;AACtC,4BAAY,IAAI,kBAAkB;AAAA,kBAChC,GAAG,OAAO,CAAC,EAAE;AAAA,kBACb,GAAG,IAAI,OAAO,CAAC,EAAE,CAAC;AAAA,gBACpB,CAAC;AAAA,cACH;AACA,0BAAY,IAAI,kBAAkB;AAAA,gBAChC,GAAG,OAAO,CAAC,EAAE;AAAA,gBACb,GAAG,IAAI,OAAO,CAAC,EAAE,CAAC;AAAA,cACpB,CAAC;AAAA,YACH;AAEA,wBAAY,IAAI,wBAAwB,CAAC,CAAC;AAE1C,mBAAO,KAAK,GAAG,YAAY,MAAM,CAAC;AAAA,UACpC;AAAA,QACF;AAAA,MACF,WAAW,QAAQ,SAAS,oBAAoB;AAC9C,YAAI,QAAQ,UAAU,SAAS,eAAe,SAAS,KAAY,GAAG;AACpE,gBAAM,SAAS,QAAQ,mBAAmB,OAAO,OAAO,CAAC;AACzD,cAAI,WAAW;AACf,cACE,kBAAkB,WAClB,OAAO,QAAQ,iBAAiB,UAChC;AACA,uBAAW,QAAQ;AAAA,UACrB,OAAO;AAEL,kBAAM,aAAa,YAAY;AAAA,cAC7B,CACE,cAEA,UAAU,SAAS,qBACnB,UAAU,MAAM,QAAQ,KACxB,UAAU,MAAM,QAAQ,KACxB,kBAAkB,aAClB,OAAO,UAAU,iBAAiB;AAAA,YACtC;AACA,gBAAI,YAAY;AACd,yBAAW,WAAW;AAAA,YACxB;AAAA,UACF;AAEA,cAAI,iBAAiB,oCAAoC,OAAO;AAChE,cACE,QAAQ,UAAU,WACjB,aAAa,MAAM,aAAa,MACjC;AACA,6BAAiB,oCAAoC;AAAA,cACnD,GAAG;AAAA,cACH,OAAO,QAAQ;AAAA,cACf,QAAQ,QAAQ;AAAA,YAClB,CAAC;AACD,uBAAW;AAAA,UACb;AAEA,gBAAM,kBAAkB,mBAAmB,QAAQ,cAAc;AAEjE,gBAAM,KAAK,cAAc,EAAE,IAAI,mBAAmB;AAAA,YAChD;AAAA,UACF,CAAC;AACD,cAAI,UAAU;AACZ,eAAG,IAAI,iBAAiB;AAAA,cACtB,kBAAkB;AAAA,YACpB,CAAC;AAAA,UACH;AACA,aAAG,IAAI,mBAAmB,EAAE,GAAG,QAAQ,GAAG,GAAG,IAAI,QAAQ,CAAC,EAAE,CAAC;AAC7D,cAAI,UAAU;AACZ,eAAG,IAAI,iBAAiB,EAAE,kBAAkB,EAAE,CAAC;AAAA,UACjD;AACA,iBAAO,KAAK,GAAG,GAAG,MAAM,CAAC;AAAA,QAC3B;AAAA,MACF,WAAW,QAAQ,SAAS,mBAAmB;AAC7C,YAAI,QAAQ,OAAO,SAAS,KAAY,GAAG;AACzC,gBAAM,gBAAgB;AAAA,YACpB,QAAQ,mBAAmB,OAAO,QAAQ,CAAC;AAAA,UAC7C;AACA,cACE,eAAe,SAAS,KAAY,KACpC,QAAQ,gCAAgC,MACxC;AACA,0BAAc,KAAK,QAAQ,mBAAmB,OAAO,YAAY,CAAC,CAAC;AAAA,UACrE;AACA,qBAAW,UAAU,eAAe;AAElC,kBAAM,QACJ,gBAAgB,WAAW,OAAO,QAAQ,eAAe,WACrD,QAAQ,aACR;AACN,kBAAM,QACJ,iBAAiB,WACjB,OAAO,QAAQ,gBAAgB,WAC3B,QAAQ,cACR;AAEN,kBAAM,qBAA+B,CAAC,KAAK;AAC3C,gBACE,iBAAiB,WACjB,OAAO,QAAQ,gBAAgB,UAC/B;AACA,iCAAmB,KAAK,QAAQ,WAAW;AAAA,YAC7C;AACA,gBACE,oBAAoB,WACpB,OAAO,QAAQ,mBAAmB,UAClC;AACA,iCAAmB,KAAK,QAAQ,cAAc;AAAA,YAChD;AACA,kBAAM,OAAO,KAAK,IAAI,GAAG,kBAAkB;AAE3C,kBAAM,sBAAgC,CAAC,KAAK;AAC5C,gBACE,kBAAkB,WAClB,OAAO,QAAQ,iBAAiB,UAChC;AACA,kCAAoB,KAAK,QAAQ,YAAY;AAAA,YAC/C;AACA,gBACE,qBAAqB,WACrB,OAAO,QAAQ,oBAAoB,UACnC;AACA,kCAAoB,KAAK,QAAQ,eAAe;AAAA,YAClD;AACA,kBAAM,OAAO,KAAK,IAAI,GAAG,mBAAmB;AAE5C,gBAAI,QAAQ,UAAU,QAAQ;AAE5B,oBAAM,uBAAuB;AAAA,gBAC3B,wBAAwB;AAAA,gBACxB,UAAU,KAAK,IAAI,MAAM,IAAI;AAAA,cAC/B;AAEA,kBAAI;AACJ,kBAAI;AACF,kCAAkB;AAAA,kBAChB;AAAA,kBACA;AAAA,gBACF;AAAA,cACF,QAAQ;AACN,kCACE,KAAK;AAAA,kBACH,GAAG,OACA,OAAO,CAAC,QAAQ,qBAAqB,GAAG,EACxC,IAAI,CAAC,QAAQ,IAAI,eAAe;AAAA,kBACnC;AAAA,gBACF,IAAI;AAEN,uBAAO;AAAA,kBACL,GAAG,cAAc,EACd,IAAI,4BAA4B;AAAA,oBAC/B;AAAA,oBACA,GAAG;AAAA,kBACL,CAAC,EACA,MAAM;AAAA,gBACX;AAAA,cACF;AAEA,oBAAM,KAAK,cAAc,EAAE,IAAI,mBAAmB;AAAA,gBAChD;AAAA,cACF,CAAC;AAED,oBAAM,mBACF,QAAQ,gBAAgB,KAAK,KAAK,KAAM;AAC5C,oBAAM,WAAW,KAAK,IAAI,eAAe;AACzC,oBAAM,WAAW,KAAK,IAAI,eAAe;AAEzC,oBAAM,qBAAqB,CAAC,IAAY,OAAe;AACrD,sBAAM,WAAW,KAAK,WAAW,KAAK;AACtC,sBAAM,WAAW,KAAK,WAAW,KAAK;AACtC,uBAAO;AAAA,kBACL,GAAG,QAAQ,IAAI;AAAA,kBACf,GAAG,QAAQ,IAAI;AAAA,gBACjB;AAAA,cACF;AAEA,oBAAM,eAAe,QAAQ;AAC7B,oBAAM,SAAS,gBACV,OAAO,QAAQ,KACf,OAAO,QAAQ;AAEpB,kBAAI,UAAU,GAAG;AACf,sBAAM,SAAS,mBAAmB,GAAG,CAAC;AACtC,mBAAG,IAAI,mBAAmB,EAAE,GAAG,OAAO,GAAG,GAAG,IAAI,OAAO,CAAC,EAAE,CAAC;AAAA,cAC7D,OAAO;AACL,sBAAM,gBAAgB,eAClB,EAAE,GAAG,CAAC,QAAQ,GAAG,EAAE,IACnB,EAAE,GAAG,GAAG,GAAG,CAAC,OAAO;AACvB,sBAAM,cAAc,eAChB,EAAE,GAAG,QAAQ,GAAG,EAAE,IAClB,EAAE,GAAG,GAAG,GAAG,OAAO;AAEtB,sBAAM,aAAa;AAAA,kBACjB,cAAc;AAAA,kBACd,cAAc;AAAA,gBAChB;AACA,sBAAM,WAAW;AAAA,kBACf,YAAY;AAAA,kBACZ,YAAY;AAAA,gBACd;AAEA,mBAAG,IAAI,mBAAmB;AAAA,kBACxB,GAAG,WAAW;AAAA,kBACd,GAAG,IAAI,WAAW,CAAC;AAAA,gBACrB,CAAC,EACE,IAAI,kBAAkB;AAAA,kBACrB,GAAG,WAAW;AAAA,kBACd,GAAG,IAAI,WAAW,CAAC;AAAA,gBACrB,CAAC,EACA,IAAI,kBAAkB;AAAA,kBACrB,GAAG,SAAS;AAAA,kBACZ,GAAG,IAAI,SAAS,CAAC;AAAA,gBACnB,CAAC,EACA,IAAI,mBAAmB;AAAA,kBACtB,GAAG,SAAS;AAAA,kBACZ,GAAG,IAAI,SAAS,CAAC;AAAA,gBACnB,CAAC;AAAA,cACL;AAEA,qBAAO,KAAK,GAAG,GAAG,MAAM,CAAC;AAAA,YAC3B,OAAO;AAEL,oBAAM,mBACJ,QAAQ,mBAAmB,OAAO,YAAY,CAAC;AACjD,kBAAI,iBAAiB,mCAAmC;AAAA,gBACtD,GAAG;AAAA,gBACH,GAAI,QAAQ,UAAU,WAClB,EAAE,aAAa,MAAM,cAAc,KAAK,IACxC,CAAC;AAAA,cACP,CAAC;AACD,kBAAI,WAAW,kBAAkB;AAC/B,iCAAiB,6CAA6C;AAAA,kBAC5D,GAAG;AAAA,kBACH,GAAI,QAAQ,UAAU,WAClB,EAAE,aAAa,MAAM,cAAc,KAAK,IACxC,CAAC;AAAA,gBACP,CAAC;AAAA,cACH;AACA,oBAAM,WACJ,uBAAuB,WACvB,OAAO,QAAQ,sBAAsB,YACrC,KAAK,IAAI,OAAO,IAAI,IAAI,OACpB,QAAQ,oBACR;AAEN,oBAAM,KAAK,cAAc,EAAE,IAAI,mBAAmB;AAAA,gBAChD,iBAAiB,mBAAmB,QAAQ,cAAc;AAAA,cAC5D,CAAC;AAED,kBAAI;AACF,mBAAG,IAAI,iBAAiB,EAAE,kBAAkB,SAAS,CAAC;AAExD,iBAAG,IAAI,mBAAmB,EAAE,GAAG,QAAQ,GAAG,GAAG,IAAI,QAAQ,CAAC,EAAE,CAAC;AAE7D,kBAAI,SAAU,IAAG,IAAI,iBAAiB,EAAE,kBAAkB,EAAE,CAAC;AAE7D,qBAAO,KAAK,GAAG,GAAG,MAAM,CAAC;AAAA,YAC3B;AAAA,UACF;AAAA,QACF;AAAA,MACF,WAAW,QAAQ,SAAS,YAAY;AACtC,YACE,eAAe,SAAS,KAAY,KACpC,QAAQ,gCAAgC,MACxC;AACA,qBAAW,UAAU;AAAA,YACnB,QAAQ,mBAAmB,OAAO,YAAY,CAAC;AAAA,UACjD,GAAG;AACD,gBAAI,QAAQ,eAAe,UAAU;AACnC,sBAAQ;AAAA,gBACN;AAAA,cACF;AACA;AAAA,YACF;AACA,mBAAO;AAAA,cACL,GAAG,cAAc,EACd,IAAI,mBAAmB;AAAA,gBACtB,iBAAiB;AAAA,kBACf;AAAA,kBACA,6CAA6C,OAAO;AAAA,gBACtD;AAAA,cACF,CAAC,EACA,IAAI,mBAAmB,EAAE,GAAG,QAAQ,GAAG,GAAG,IAAI,QAAQ,CAAC,EAAE,CAAC,EAC1D,MAAM;AAAA,YACX;AAAA,UACF;AAAA,QACF;AAAA,MACF,WAAW,QAAQ,SAAS,WAAW;AACrC,YAAI,QAAQ,OAAO,SAAS,KAAY,GAAG;AACzC,gBAAM,gBAAgB;AAAA,YACpB,QAAQ,mBAAmB,OAAO,QAAQ,CAAC;AAAA,UAC7C;AACA,cACE,QAAQ,cAAc,SACtB,eAAe,SAAS,KAAY,GACpC;AACA,0BAAc,KAAK,QAAQ,mBAAmB,OAAO,YAAY,CAAC,CAAC;AAAA,UACrE;AACA,qBAAW,UAAU,eAAe;AAClC,mBAAO;AAAA,cACL,GAAG,cAAc,EACd,IAAI,mBAAmB;AAAA,gBACtB,iBAAiB;AAAA,kBACf;AAAA,kBACA,mCAAmC,OAAO;AAAA,gBAC5C;AAAA,cACF,CAAC,EACA,IAAI,mBAAmB,EAAE,GAAG,QAAQ,GAAG,GAAG,IAAI,QAAQ,CAAC,EAAE,CAAC,EAC1D,MAAM;AAAA,YACX;AAAA,UACF;AAAA,QACF;AAAA,MACF,WAAW,QAAQ,SAAS,eAAe,UAAU,WAAW;AAE9D,YAAI,SAAU;AAEd,cAAM,SAAS,QAAQ;AACvB,cAAM,EAAE,OAAO,QAAQ,QAAQ,QAAQ,IAAI;AAC3C,cAAM,cAAc,cAAc,EAAE,IAAI,mBAAmB;AAAA,UACzD,iBAAiB;AAAA,QACnB,CAAC;AACD,YAAI,WAAW,QAAQ,SAAS,GAAG;AACjC,gBAAM,gBAAgB,QAAQ,IAAI,CAAC,WAAW;AAAA,YAC5C,GAAG,MAAM;AAAA,YACT,GAAG,IAAI,MAAM,CAAC;AAAA,UAChB,EAAE;AAEF,gBAAM,aAAa,cAAc,CAAC;AAClC,sBAAY,IAAI,kBAAkB,UAAU;AAC5C,mBAAS,IAAI,GAAG,IAAI,cAAc,QAAQ,KAAK;AAC7C,wBAAY,IAAI,kBAAkB,cAAc,CAAC,CAAC;AAAA,UACpD;AAEA,gBAAM,YAAY,cAAc,cAAc,SAAS,CAAC;AACxD,cAAI,UAAU,MAAM,WAAW,KAAK,UAAU,MAAM,WAAW,GAAG;AAChE,wBAAY,IAAI,kBAAkB,UAAU;AAAA,UAC9C;AAAA,QACF,OAAO;AACL,sBACG,IAAI,kBAAkB;AAAA,YACrB,GAAG,OAAQ,IAAI,QAAS;AAAA,YACxB,GAAG,IAAI,OAAQ,IAAI,SAAU,CAAC;AAAA,UAChC,CAAC,EACA,IAAI,kBAAkB;AAAA,YACrB,GAAG,OAAQ,IAAI,QAAS;AAAA,YACxB,GAAG,IAAI,OAAQ,IAAI,SAAU,CAAC;AAAA,UAChC,CAAC,EAKA,IAAI,kBAAkB;AAAA,YACrB,GAAG,OAAQ,IAAI,QAAS;AAAA,YACxB,GAAG,IAAI,OAAQ,IAAI,SAAU,CAAC;AAAA,UAChC,CAAC,EAKA,IAAI,kBAAkB;AAAA,YACrB,GAAG,OAAQ,IAAI,QAAS;AAAA,YACxB,GAAG,IAAI,OAAQ,IAAI,SAAU,CAAC;AAAA,UAChC,CAAC,EAKA,IAAI,kBAAkB;AAAA,YACrB,GAAG,OAAQ,IAAI,QAAS;AAAA,YACxB,GAAG,IAAI,OAAQ,IAAI,SAAU,CAAC;AAAA,UAChC,CAAC;AAAA,QACL;AAEA,eAAO,KAAK,GAAG,YAAY,MAAM,CAAC;AAAA,MACpC,WAAW,QAAQ,SAAS,eAAe,UAAU,WAAW;AAC9D,cAAM,SAAS,QAAQ;AACvB,cAAM,QAAQ;AACd,cAAM,EAAE,OAAO,QAAQ,OAAO,IAAI;AAClC,cAAM,cAAc,cAAc,EAC/B,IAAI,mBAAmB;AAAA,UACtB,iBAAiB;AAAA,QACnB,CAAC,EACA,IAAI,kBAAkB;AAAA,UACrB,GAAG,OAAQ,IAAI,QAAS;AAAA,UACxB,GAAG,IAAI,OAAQ,IAAI,SAAU,CAAC;AAAA,QAChC,CAAC,EACA,IAAI,kBAAkB;AAAA,UACrB,GAAG,OAAQ,IAAI,QAAS;AAAA,UACxB,GAAG,IAAI,OAAQ,IAAI,SAAU,CAAC;AAAA,QAChC,CAAC,EACA,IAAI,kBAAkB;AAAA,UACrB,GAAG,OAAQ,IAAI,QAAS;AAAA,UACxB,GAAG,IAAI,OAAQ,IAAI,SAAU,CAAC;AAAA,QAChC,CAAC,EACA,IAAI,kBAAkB;AAAA,UACrB,GAAG,OAAQ,IAAI,QAAS;AAAA,UACxB,GAAG,IAAI,OAAQ,IAAI,SAAU,CAAC;AAAA,QAChC,CAAC,EACA,IAAI,kBAAkB;AAAA,UACrB,GAAG,OAAQ,IAAI,QAAS;AAAA,UACxB,GAAG,IAAI,OAAQ,IAAI,SAAU,CAAC;AAAA,QAChC,CAAC;AAEH,eAAO,KAAK,GAAG,YAAY,MAAM,CAAC;AAAA,MACpC,WAAW,QAAQ,SAAS,cAAc;AACxC,YAAI,UAAU,WAAW;AACvB,gBAAM,WAAW,QAAQ;AACzB,gBAAM,iBAAiB,cAAc,EAAE,IAAI,mBAAmB;AAAA,YAC5D,iBAAiB;AAAA,UACnB,CAAC;AAED,gBAAM,KAAK;AAEX,cAAI,GAAG,UAAU,QAAQ;AACvB,kBAAM,EAAE,QAAQ,OAAO,QAAQ,UAAU,cAAc,IAAI;AAC3D,kBAAM,IAAI,QAAQ;AAClB,kBAAM,IAAI,SAAS;AACnB,kBAAM,IAAI,KAAK;AAAA,cACb;AAAA,cACA,KAAK,IAAI,iBAAiB,GAAG,KAAK,IAAI,CAAC,GAAG,KAAK,IAAI,CAAC,CAAC;AAAA,YACvD;AAEA,kBAAM,sBAAsB,MAAM;AAChC,kBAAIC,mBAAkB,SAAS;AAC/B,kBAAI,UAAU;AACZ,sBAAM,YAAa,WAAW,KAAK,KAAM;AACzC,gBAAAA,mBAAkB,OAAO,SAAS;AAAA,cACpC;AACA,qBAAO,QAAQ,UAAU,OAAO,GAAG,OAAO,CAAC,GAAGA,gBAAe;AAAA,YAC/D;AAEA,kBAAM,kBAAkB,oBAAoB;AAE5C,gBAAI,IAAI,GAAG;AACT,oBAAM,aAAa,EAAE,GAAG,CAAC,IAAI,GAAG,GAAG,EAAE;AAErC,kBAAI,eAAe,aAAa,iBAAiB,UAAU;AAE3D,6BAAe,IAAI,kBAAkB;AAAA,gBACnC,GAAG,aAAa;AAAA,gBAChB,GAAG,IAAI,aAAa,CAAC;AAAA,cACvB,CAAC;AAED,oBAAM,UAAU,CAAC,UAAoC;AACnD,sBAAM,mBAAmB,aAAa,iBAAiB,KAAK;AAC5D,+BAAe,IAAI,kBAAkB;AAAA,kBACnC,GAAG,iBAAiB;AAAA,kBACpB,GAAG,IAAI,iBAAiB,CAAC;AAAA,gBAC3B,CAAC;AACD,+BAAe;AAAA,cACjB;AAEA,oBAAM,SAAS,CAAC,YAGV;AACJ,sBAAM,mBAAmB;AAAA,kBACvB;AAAA,kBACA,QAAQ;AAAA,gBACV;AACA,sBAAM,oBAAoB;AAAA,kBACxB;AAAA,kBACA,QAAQ;AAAA,gBACV;AAEA,+BACG,IAAI,2CAA2C,CAAC,CAAC,EACjD,IAAI,kBAAkB;AAAA,kBACrB,GAAG,iBAAiB;AAAA,kBACpB,GAAG,IAAI,iBAAiB,CAAC;AAAA,kBACzB,GAAG,kBAAkB,IAAI,aAAa;AAAA,kBACtC,GAAG,IAAI,kBAAkB,CAAC,IAAI,IAAI,aAAa,CAAC;AAAA,gBAClD,CAAC,EACA,IAAI,+BAA+B,CAAC,CAAC;AAExC,+BAAe;AAAA,cACjB;AAEA,sBAAQ,EAAE,GAAG,IAAI,GAAG,GAAG,EAAE,CAAC;AAC1B,qBAAO;AAAA,gBACL,OAAO,EAAE,GAAG,GAAG,GAAG,IAAI,EAAE;AAAA,gBACxB,QAAQ,EAAE,GAAG,IAAI,GAAG,GAAG,IAAI,EAAE;AAAA,cAC/B,CAAC;AACD,sBAAQ,EAAE,GAAG,GAAG,GAAG,CAAC,IAAI,EAAE,CAAC;AAC3B,qBAAO;AAAA,gBACL,OAAO,EAAE,GAAG,IAAI,GAAG,GAAG,CAAC,EAAE;AAAA,gBACzB,QAAQ,EAAE,GAAG,IAAI,GAAG,GAAG,CAAC,IAAI,EAAE;AAAA,cAChC,CAAC;AACD,sBAAQ,EAAE,GAAG,CAAC,IAAI,GAAG,GAAG,CAAC,EAAE,CAAC;AAC5B,qBAAO;AAAA,gBACL,OAAO,EAAE,GAAG,CAAC,GAAG,GAAG,CAAC,IAAI,EAAE;AAAA,gBAC1B,QAAQ,EAAE,GAAG,CAAC,IAAI,GAAG,GAAG,CAAC,IAAI,EAAE;AAAA,cACjC,CAAC;AACD,sBAAQ,EAAE,GAAG,CAAC,GAAG,GAAG,IAAI,EAAE,CAAC;AAC3B,qBAAO;AAAA,gBACL,OAAO,EAAE,GAAG,CAAC,IAAI,GAAG,GAAG,EAAE;AAAA,gBACzB,QAAQ,EAAE,GAAG,CAAC,IAAI,GAAG,GAAG,IAAI,EAAE;AAAA,cAChC,CAAC;AAAA,YACH,OAAO;AACL,oBAAM,SAAS;AAAA,gBACb,EAAE,GAAG,CAAC,GAAG,GAAG,EAAE;AAAA;AAAA,gBACd,EAAE,GAAG,GAAG,GAAG,EAAE;AAAA;AAAA,gBACb,EAAE,GAAG,GAAG,GAAG,CAAC,EAAE;AAAA;AAAA,gBACd,EAAE,GAAG,CAAC,GAAG,GAAG,CAAC,EAAE;AAAA;AAAA,cACjB;AAEA,oBAAM,oBAAoB,OAAO;AAAA,gBAAI,CAAC,MACpC,aAAa,iBAAiB,CAAC;AAAA,cACjC;AAEA,6BAAe,IAAI,kBAAkB;AAAA,gBACnC,GAAG,kBAAkB,CAAC,EAAE;AAAA,gBACxB,GAAG,IAAI,kBAAkB,CAAC,EAAE,CAAC;AAAA,cAC/B,CAAC;AACD,uBAAS,IAAI,GAAG,IAAI,kBAAkB,QAAQ,KAAK;AACjD,+BAAe,IAAI,kBAAkB;AAAA,kBACnC,GAAG,kBAAkB,CAAC,EAAE;AAAA,kBACxB,GAAG,IAAI,kBAAkB,CAAC,EAAE,CAAC;AAAA,gBAC/B,CAAC;AAAA,cACH;AACA,6BAAe,IAAI,kBAAkB;AAAA,gBACnC,GAAG,kBAAkB,CAAC,EAAE;AAAA,gBACxB,GAAG,IAAI,kBAAkB,CAAC,EAAE,CAAC;AAAA,cAC/B,CAAC;AAAA,YACH;AAAA,UACF,WAAW,GAAG,UAAU,UAAU;AAChC,kBAAM,EAAE,QAAQ,OAAO,IAAI;AAG3B,kBAAM,KAAK,EAAE,GAAG,OAAO,IAAI,QAAQ,GAAG,OAAO,EAAE;AAC/C,kBAAM,KAAK,EAAE,GAAG,OAAO,IAAI,QAAQ,GAAG,OAAO,EAAE;AAE/C,2BACG,IAAI,kBAAkB;AAAA,cACrB,GAAG,GAAG;AAAA,cACN,GAAG,IAAI,GAAG,CAAC;AAAA,YACb,CAAC,EACA,IAAI,kDAAkD,CAAC,CAAC,EAExD,IAAI,kBAAkB;AAAA,cACrB,GAAG,GAAG;AAAA,cACN,GAAG,IAAI,GAAG,CAAC;AAAA,cACX,GAAG,CAAC;AAAA,cACJ,GAAG;AAAA,YACL,CAAC,EAEA,IAAI,kBAAkB;AAAA,cACrB,GAAG,GAAG;AAAA,cACN,GAAG,IAAI,GAAG,CAAC;AAAA,cACX,GAAG;AAAA,cACH,GAAG;AAAA,YACL,CAAC,EACA,IAAI,+BAA+B,CAAC,CAAC;AAAA,UAC1C,WAAW,GAAG,UAAU,WAAW;AACjC,kBAAM,EAAE,OAAO,IAAI;AACnB,gBAAI,OAAO,SAAS,GAAG;AACrB,6BAAe,IAAI,kBAAkB;AAAA,gBACnC,GAAG,OAAO,CAAC,EAAE;AAAA,gBACb,GAAG,IAAI,OAAO,CAAC,EAAE,CAAC;AAAA,cACpB,CAAC;AACD,uBAAS,IAAI,GAAG,IAAI,OAAO,QAAQ,KAAK;AACtC,+BAAe,IAAI,kBAAkB;AAAA,kBACnC,GAAG,OAAO,CAAC,EAAE;AAAA,kBACb,GAAG,IAAI,OAAO,CAAC,EAAE,CAAC;AAAA,gBACpB,CAAC;AAAA,cACH;AACA,6BAAe,IAAI,kBAAkB;AAAA,gBACnC,GAAG,OAAO,CAAC,EAAE;AAAA,gBACb,GAAG,IAAI,OAAO,CAAC,EAAE,CAAC;AAAA,cACpB,CAAC;AAAA,YACH;AAAA,UACF;AACA,mBAAS,KAAK,GAAG,eAAe,MAAM,CAAC;AAAA,QACzC;AAAA,MACF;AAAA,IACF;AAAA,EACF;AAEA,aAAW,OAAO,OAAO,KAAK,OAAO,GAAG;AACtC,YAAQ,GAAqC,EAAE;AAAA,MAC7C,GAAG,cAAc,EAAE,IAAI,eAAe,CAAC,CAAC,EAAE,MAAM;AAAA,IAClD;AAAA,EACF;AAEA,SAAO;AACT;","names":["z","z","z","z","z","z","z","z","z","z","z","z","z","z","z","z","z","z","z","z","z","z","z","z","z","z","z","z","z","z","z","z","z","z","z","z","z","z","z","z","z","z","z","z","z","z","z","z","z","z","z","z","z","z","z","z","z","z","z","z","z","z","z","z","z","z","z","z","z","z","z","z","z","z","z","z","z","z","z","z","z","z","z","z","z","z","z","z","z","z","z","z","getLayerCount","transformMatrix"]}

package/dist/cli.js

@@ -4,7 +4,7 @@ import {
   convertSoupToGerberCommands,
   stringifyExcellonDrill,
   stringifyGerberCommandLayers
-} from "./chunk-KJGFE3X3.js";
+} from "./chunk-I77ERJH4.js";
 
 // src/cli.ts
 import { program } from "commander";

package/dist/index.d.ts

@@ -483,14 +483,14 @@ declare const gerber_command_map: {
         rotation: z.ZodOptional<z.ZodNumber>;
         hole_diameter: z.ZodOptional<z.ZodNumber>;
     }, "strip", z.ZodTypeAny, {
-        outer_diameter: number;
         standard_template_code: "P";
+        outer_diameter: number;
         number_of_vertices: number;
         hole_diameter?: number | undefined;
         rotation?: number | undefined;
     }, {
-        outer_diameter: number;
         standard_template_code: "P";
+        outer_diameter: number;
         number_of_vertices: number;
         hole_diameter?: number | undefined;
         rotation?: number | undefined;
@@ -619,9 +619,9 @@ declare const gerber_command_map: {
         polarity: z.ZodEnum<["D", "C"]>;
     }, "strip", z.ZodTypeAny, {
         command_code: "LP";
-        polarity: "D" | "C";
+        polarity: "C" | "D";
     }, {
-        polarity: "D" | "C";
+        polarity: "C" | "D";
         command_code?: "LP" | undefined;
     }>>;
     readonly start_region_statement: GerberCommandDef<"G36", z.ZodObject<{

package/dist/index.js

@@ -8,7 +8,7 @@ import {
   stringifyGerberCommand,
   stringifyGerberCommandLayers,
   stringifyGerberCommands
-} from "./chunk-KJGFE3X3.js";
+} from "./chunk-I77ERJH4.js";
 export {
   convertSoupToExcellonDrillCommandLayers,
   convertSoupToExcellonDrillCommands,

package/package.json

@@ -1,6 +1,6 @@
 {
   "name": "circuit-json-to-gerber",
-  "version": "0.0.62",
+  "version": "0.0.64",
   "main": "dist/index.js",
   "type": "module",
   "scripts": {

package/dist/chunk-KJGFE3X3.js.map

@@ -1 +0,0 @@
-{"version":3,"sources":["../src/excellon-drill/commands/FMAT.ts","../src/excellon-drill/define-excellon-drill-command.ts","../src/excellon-drill/commands/G00.ts","../src/excellon-drill/commands/G01.ts","../src/excellon-drill/commands/G05.ts","../src/excellon-drill/commands/G85.ts","../src/excellon-drill/commands/G90.ts","../src/excellon-drill/commands/M15.ts","../src/excellon-drill/commands/M16.ts","../src/excellon-drill/commands/M30.ts","../src/excellon-drill/commands/M48.ts","../src/excellon-drill/commands/M95.ts","../src/excellon-drill/commands/define_tool.ts","../src/excellon-drill/commands/drill_at.ts","../src/excellon-drill/commands/header_attribute.ts","../src/excellon-drill/commands/header_comment.ts","../src/excellon-drill/commands/rewind.ts","../src/excellon-drill/commands/unit_format.ts","../src/excellon-drill/commands/use_tool.ts","../src/excellon-drill/commands/aper_function_header.ts","../src/excellon-drill/commands/percent_sign.ts","../src/excellon-drill/any-excellon-drill-command-map.ts","../src/excellon-drill/stringify-excellon-drill.ts","../src/excellon-drill/excellon-drill-builder.ts","../src/excellon-drill/convert-soup-to-excellon-drill-commands.ts","../src/gerber/commands/add_attribute_on_aperture.ts","../src/gerber/define-gerber-command.ts","../src/gerber/commands/add_attribute_on_file.ts","../src/gerber/commands/add_attribute_on_object.ts","../src/gerber/commands/aperture_block.ts","../src/gerber/commands/comment.ts","../src/gerber/commands/create_arc.ts","../src/gerber/commands/define_aperture.ts","../src/gerber/commands/define_macro_aperture_template.ts","../src/gerber/commands/delete_attribute.ts","../src/gerber/commands/end_of_file.ts","../src/gerber/commands/end_region_statement.ts","../src/gerber/commands/flash_operation.ts","../src/gerber/stringify-gerber/get-gerber-coordinate-with-padding.ts","../src/gerber/commands/load_mirroring.ts","../src/gerber/commands/load_polarity.ts","../src/gerber/commands/load_rotation.ts","../src/gerber/commands/load_scaling.ts","../src/gerber/commands/move_operation.ts","../src/gerber/commands/plot_operation.ts","../src/gerber/commands/set_coordinate_format.ts","../src/gerber/commands/set_current_aperture_d_code.ts","../src/gerber/commands/set_movement_mode_to_clockwise_circular.ts","../src/gerber/commands/set_movement_mode_to_counterclockwise_circular.ts","../src/gerber/commands/set_movement_mode_to_linear.ts","../src/gerber/commands/set_unit.ts","../src/gerber/commands/start_region_statement.ts","../src/gerber/commands/step_and_repeat.ts","../src/gerber/commands/format_specification.ts","../src/gerber/commands/set_layer_polarity.ts","../src/gerber/commands/define_aperture_template.ts","../src/gerber/commands/select_aperture.ts","../src/gerber/any_gerber_command.ts","../src/gerber/gerber-builder.ts","../src/gerber/stringify-gerber/stringify-gerber-command.ts","../src/gerber/stringify-gerber/stringify-gerber-command-layers.ts","../src/gerber/stringify-gerber/stringify-gerber-commands.ts","../src/gerber/utils/pairs.ts","../src/gerber/convert-soup-to-gerber-commands/define-common-macros.ts","../src/gerber/convert-soup-to-gerber-commands/defineAperturesForLayer.ts","../src/gerber/convert-soup-to-gerber-commands/getAllTraceWidths.ts","../src/gerber/convert-soup-to-gerber-commands/findApertureNumber.ts","../package.json","../src/gerber/convert-soup-to-gerber-commands/getCommandHeaders.ts","../src/gerber/convert-soup-to-gerber-commands/getGerberLayerName.ts","../src/gerber/convert-soup-to-gerber-commands/index.ts"],"sourcesContent":["import { z } from \"zod\"\nimport { defineExcellonDrillCommand } from \"../define-excellon-drill-command\"\n\nexport const FMAT = defineExcellonDrillCommand({\n  command_code: \"FMAT\",\n  schema: z.object({\n    command_code: z.literal(\"FMAT\").default(\"FMAT\"),\n    format: z.number(),\n  }),\n  stringify: (c) => `FMAT,${c.format}`,\n})\n","import type { AnyZodObject, z } from \"zod\"\n\nexport interface ExcellonDrillCommandDef<\n  K extends string,\n  T extends AnyZodObject | z.ZodIntersection<any, any>,\n> {\n  command_code: K\n  schema: T\n  stringify: (c: z.infer<T>) => string\n}\n\nexport const defineExcellonDrillCommand = <\n  K extends string,\n  T extends AnyZodObject | z.ZodIntersection<any, any>,\n>({\n  command_code,\n  schema,\n  stringify,\n}: {\n  command_code: K\n  schema: T\n  stringify: (c: z.infer<T>) => string\n}): ExcellonDrillCommandDef<K, T> => {\n  return {\n    command_code,\n    schema,\n    stringify,\n  }\n}\n","import { z } from \"zod\"\nimport { defineExcellonDrillCommand } from \"../define-excellon-drill-command\"\n\n/**\n * Rapid move without drilling\n */\nexport const G00 = defineExcellonDrillCommand({\n  command_code: \"G00\",\n  schema: z.object({\n    command_code: z.literal(\"G00\").default(\"G00\"),\n  }),\n  stringify: () => \"G00\",\n})\n","import { z } from \"zod\"\nimport { defineExcellonDrillCommand } from \"../define-excellon-drill-command\"\n\n/**\n * Linear move with drilling\n */\nexport const G01 = defineExcellonDrillCommand({\n  command_code: \"G01\",\n  schema: z.object({\n    command_code: z.literal(\"G01\").default(\"G01\"),\n  }),\n  stringify: () => \"G01\",\n})\n","import { z } from \"zod\"\nimport { defineExcellonDrillCommand } from \"../define-excellon-drill-command\"\n\nexport const G05 = defineExcellonDrillCommand({\n  command_code: \"G05\",\n  schema: z.object({\n    command_code: z.literal(\"G05\").default(\"G05\"),\n  }),\n  stringify: () => \"G05\",\n})\n","import { z } from \"zod\"\nimport { defineExcellonDrillCommand } from \"../define-excellon-drill-command\"\n\nexport const G85 = defineExcellonDrillCommand({\n  command_code: \"G85\",\n  schema: z.object({\n    command_code: z.literal(\"G85\").default(\"G85\"),\n    x: z.number(),\n    y: z.number(),\n    width: z.number(), // slot width = tool diameter\n  }),\n  stringify: ({ x, y }) => `G85X${x.toFixed(3)}Y${y.toFixed(3)}`,\n})\n","import { z } from \"zod\"\nimport { defineExcellonDrillCommand } from \"../define-excellon-drill-command\"\n\nexport const G90 = defineExcellonDrillCommand({\n  command_code: \"G90\",\n  schema: z.object({\n    command_code: z.literal(\"G90\").default(\"G90\"),\n  }),\n  stringify: () => \"G90\",\n})\n","import { z } from \"zod\"\nimport { defineExcellonDrillCommand } from \"../define-excellon-drill-command\"\n\n/**\n * Z-Axis Feed Down\n */\nexport const M15 = defineExcellonDrillCommand({\n  command_code: \"M15\",\n  schema: z.object({\n    command_code: z.literal(\"M15\").default(\"M15\"),\n  }),\n  stringify: () => \"M15\",\n})\n","import { z } from \"zod\"\nimport { defineExcellonDrillCommand } from \"../define-excellon-drill-command\"\n\n/**\n * Z-Axis Feed Up (lift drill up)\n */\nexport const M16 = defineExcellonDrillCommand({\n  command_code: \"M16\",\n  schema: z.object({\n    command_code: z.literal(\"M16\").default(\"M16\"),\n  }),\n  stringify: () => \"M16\",\n})\n","import { z } from \"zod\"\nimport { defineExcellonDrillCommand } from \"../define-excellon-drill-command\"\n\nexport const M30 = defineExcellonDrillCommand({\n  command_code: \"M30\",\n  schema: z.object({\n    command_code: z.literal(\"M30\").default(\"M30\"),\n  }),\n  stringify: () => \"M30\",\n})\n","import { z } from \"zod\"\nimport { defineExcellonDrillCommand } from \"../define-excellon-drill-command\"\n\nexport const M48 = defineExcellonDrillCommand({\n  command_code: \"M48\",\n  schema: z.object({\n    command_code: z.literal(\"M48\").default(\"M48\"),\n  }),\n  stringify: () => \"M48\",\n})\n","import { z } from \"zod\"\nimport { defineExcellonDrillCommand } from \"../define-excellon-drill-command\"\n\nexport const M95 = defineExcellonDrillCommand({\n  command_code: \"M95\",\n  schema: z.object({\n    command_code: z.literal(\"M95\").default(\"M95\"),\n  }),\n  stringify: () => \"M95\",\n})\n","import { z } from \"zod\"\nimport { defineExcellonDrillCommand } from \"../define-excellon-drill-command\"\n\nexport const define_tool = defineExcellonDrillCommand({\n  command_code: \"define_tool\",\n  schema: z.object({\n    command_code: z.literal(\"define_tool\").default(\"define_tool\"),\n    tool_number: z.number(),\n    diameter: z.number(),\n  }),\n  stringify: (c) => `T${c.tool_number}C${c.diameter.toFixed(6)}`,\n})\n","import { z } from \"zod\"\nimport { defineExcellonDrillCommand } from \"../define-excellon-drill-command\"\n\nexport const drill_at = defineExcellonDrillCommand({\n  command_code: \"drill_at\",\n  schema: z.object({\n    command_code: z.literal(\"drill_at\").default(\"drill_at\"),\n    x: z.number(),\n    y: z.number(),\n  }),\n  stringify: (c) => `X${c.x.toFixed(4)}Y${c.y.toFixed(4)}`,\n})\n","import { z } from \"zod\"\nimport { defineExcellonDrillCommand } from \"../define-excellon-drill-command\"\n\nexport const header_attribute = defineExcellonDrillCommand({\n  command_code: \"header_attribute\",\n  schema: z.object({\n    command_code: z.literal(\"header_attribute\").default(\"header_attribute\"),\n    attribute_name: z.string(),\n    attribute_value: z.string(),\n  }),\n  stringify({ attribute_name, attribute_value }) {\n    return `; #@! ${attribute_name},${attribute_value}`\n  },\n})\n","import { z } from \"zod\"\nimport { defineExcellonDrillCommand } from \"../define-excellon-drill-command\"\n\nexport const header_comment = defineExcellonDrillCommand({\n  command_code: \"header_comment\",\n  schema: z.object({\n    command_code: z.literal(\"header_comment\").default(\"header_comment\"),\n    text: z.string(),\n  }),\n  stringify({ text }) {\n    return `; ${text}`\n  },\n})\n","import { z } from \"zod\"\nimport { defineExcellonDrillCommand } from \"../define-excellon-drill-command\"\n\nexport const rewind = defineExcellonDrillCommand({\n  command_code: \"rewind\",\n  schema: z.object({\n    command_code: z.literal(\"rewind\").default(\"rewind\"),\n  }),\n  stringify: () => \"%\",\n})\n","import { z } from \"zod\"\nimport { defineExcellonDrillCommand } from \"../define-excellon-drill-command\"\n\nexport const unit_format = defineExcellonDrillCommand({\n  command_code: \"unit_format\",\n  schema: z.object({\n    command_code: z.literal(\"unit_format\").default(\"unit_format\"),\n    unit: z.union([z.literal(\"INCH\"), z.literal(\"METRIC\")]),\n    lz: z\n      .union([z.literal(\"LZ\"), z.literal(\"TZ\")])\n      .nullable()\n      .default(null),\n  }),\n  stringify(c) {\n    return `${c.unit}${!c.lz ? \"\" : `,${c.lz}`}`\n  },\n})\n","import { z } from \"zod\"\nimport { defineExcellonDrillCommand } from \"../define-excellon-drill-command\"\n\nexport const use_tool = defineExcellonDrillCommand({\n  command_code: \"use_tool\",\n  schema: z.object({\n    command_code: z.literal(\"use_tool\").default(\"use_tool\"),\n    tool_number: z.number(),\n  }),\n  stringify: (c) => `T${c.tool_number}`,\n})\n","import { z } from \"zod\"\nimport { defineExcellonDrillCommand } from \"../define-excellon-drill-command\"\n\nexport const aper_function_header = defineExcellonDrillCommand({\n  command_code: \"aper_function_header\",\n  schema: z.object({\n    command_code: z\n      .literal(\"aper_function_header\")\n      .default(\"aper_function_header\"),\n    is_plated: z.boolean(),\n  }),\n  stringify({ is_plated }) {\n    return is_plated\n      ? \"; #@! TA.AperFunction,Plated,PTH,ComponentDrill\"\n      : \"; #@! TA.AperFunction,NonPlated,NPTH,ComponentDrill\"\n  },\n})\n","import { z } from \"zod\"\nimport { defineExcellonDrillCommand } from \"../define-excellon-drill-command\"\n\nexport const percent_sign = defineExcellonDrillCommand({\n  command_code: \"percent_sign\",\n  schema: z.object({\n    command_code: z.literal(\"percent_sign\").default(\"percent_sign\"),\n  }),\n  stringify: () => \"%\",\n})\n","import type { z } from \"zod\"\nimport type { ExcellonDrillCommandDef } from \"./define-excellon-drill-command\"\nimport * as EDCMD from \"./commands\"\n\nexport const excellon_drill_command_map = {\n  G00: EDCMD.G00,\n  G01: EDCMD.G01,\n  G85: EDCMD.G85,\n  M48: EDCMD.M48,\n  M95: EDCMD.M95,\n  FMAT: EDCMD.FMAT,\n  unit_format: EDCMD.unit_format,\n  aper_function_header: EDCMD.aper_function_header,\n  percent_sign: EDCMD.percent_sign,\n  T: EDCMD.define_tool,\n  define_tool: EDCMD.define_tool,\n  use_tool: EDCMD.use_tool,\n  G90: EDCMD.G90,\n  G05: EDCMD.G05,\n  M15: EDCMD.M15,\n  M16: EDCMD.M16,\n  M30: EDCMD.M30,\n  drill_at: EDCMD.drill_at,\n  header_comment: EDCMD.header_comment,\n  header_attribute: EDCMD.header_attribute,\n  rewind: EDCMD.rewind,\n} satisfies Record<string, ExcellonDrillCommandDef<string, any>>\n\nexport type AnyExcellonDrillCommand = z.infer<\n  (typeof excellon_drill_command_map)[keyof typeof excellon_drill_command_map][\"schema\"]\n>\n","import {\n  type AnyExcellonDrillCommand,\n  excellon_drill_command_map,\n} from \"./any-excellon-drill-command-map\"\n\nexport const stringifyExcellonDrill = (\n  commands: Array<AnyExcellonDrillCommand>,\n) => {\n  return commands\n    .map((c) => {\n      const def = excellon_drill_command_map[c.command_code]\n      return def.stringify(c as any)\n    })\n    .join(\"\\n\")\n}\n","import type { z } from \"zod\"\nimport {\n  type AnyExcellonDrillCommand,\n  excellon_drill_command_map,\n} from \"./any-excellon-drill-command-map\"\n\nclass ExcellonDrillBuilder {\n  commands: Array<AnyExcellonDrillCommand>\n\n  constructor() {\n    this.commands = []\n  }\n\n  add<T extends keyof typeof excellon_drill_command_map>(\n    cmd: T,\n    props: z.input<(typeof excellon_drill_command_map)[T][\"schema\"]>,\n  ): ExcellonDrillBuilder {\n    this.commands.push({\n      ...({\n        command_code: excellon_drill_command_map[cmd].command_code,\n      } as any),\n      ...props,\n    })\n    return this\n  }\n\n  build(): Array<AnyExcellonDrillCommand> {\n    return this.commands\n  }\n}\n\nexport const excellonDrill = () => new ExcellonDrillBuilder()\n","import type { AnyCircuitElement, LayerRef } from \"circuit-json\"\nimport type { AnyExcellonDrillCommand } from \"./any-excellon-drill-command-map\"\nimport { excellonDrill } from \"./excellon-drill-builder\"\n\nexport type DrillLayerSpan = {\n  from_layer: LayerRef\n  to_layer: LayerRef\n}\n\nconst getLayerCount = (circuitJson: Array<AnyCircuitElement>) => {\n  const board = circuitJson.find((element) => element.type === \"pcb_board\") as\n    | { num_layers?: number }\n    | undefined\n  if (!board || typeof board.num_layers !== \"number\") {\n    return 2\n  }\n  return Math.max(2, board.num_layers)\n}\n\nconst getLayerNumber = (layer: LayerRef, layerCount: number) => {\n  if (layer === \"top\") return 1\n  if (layer === \"bottom\") return layerCount\n\n  const innerLayerMatch = layer.match(/^inner([1-6])$/)\n  if (innerLayerMatch) {\n    const innerLayerNumber = Number(innerLayerMatch[1])\n    if (innerLayerNumber >= 1 && innerLayerNumber <= layerCount - 2) {\n      return innerLayerNumber + 1\n    }\n  }\n\n  throw new Error(`Invalid layer \"${layer}\" for ${layerCount}-layer board`)\n}\n\nconst normalizeLayerSpan = (\n  span: DrillLayerSpan,\n  layerCount: number,\n): DrillLayerSpan => {\n  const fromLayerNumber = getLayerNumber(span.from_layer, layerCount)\n  const toLayerNumber = getLayerNumber(span.to_layer, layerCount)\n\n  if (fromLayerNumber <= toLayerNumber) {\n    return span\n  }\n\n  return {\n    from_layer: span.to_layer,\n    to_layer: span.from_layer,\n  }\n}\n\nconst getPlatedElementLayerSpan = (\n  element: AnyCircuitElement,\n  layerCount: number,\n): DrillLayerSpan | undefined => {\n  if (element.type !== \"pcb_plated_hole\" && element.type !== \"pcb_via\") {\n    return undefined\n  }\n\n  if (\n    \"from_layer\" in element &&\n    typeof element.from_layer === \"string\" &&\n    \"to_layer\" in element &&\n    typeof element.to_layer === \"string\"\n  ) {\n    return normalizeLayerSpan(\n      {\n        from_layer: element.from_layer as LayerRef,\n        to_layer: element.to_layer as LayerRef,\n      },\n      layerCount,\n    )\n  }\n\n  let layers: LayerRef[] = []\n  if (\"layers\" in element && Array.isArray(element.layers)) {\n    layers = element.layers as LayerRef[]\n  }\n  if (layers.length > 0) {\n    const sortedLayers = [...layers].sort(\n      (a, b) => getLayerNumber(a, layerCount) - getLayerNumber(b, layerCount),\n    )\n    return {\n      from_layer: sortedLayers[0],\n      to_layer: sortedLayers[sortedLayers.length - 1],\n    }\n  }\n\n  return {\n    from_layer: \"top\",\n    to_layer: \"bottom\",\n  }\n}\n\nconst getDefaultPlatedDrillLayerSpan = (): DrillLayerSpan => ({\n  from_layer: \"top\",\n  to_layer: \"bottom\",\n})\n\nconst getRequestedLayerSpan = (layer_span?: DrillLayerSpan) => {\n  if (layer_span) {\n    return layer_span\n  }\n  return getDefaultPlatedDrillLayerSpan()\n}\n\nconst isSameLayerSpan = (\n  a: DrillLayerSpan,\n  b: DrillLayerSpan,\n  layerCount: number,\n) => {\n  const normalizedA = normalizeLayerSpan(a, layerCount)\n  const normalizedB = normalizeLayerSpan(b, layerCount)\n  return (\n    normalizedA.from_layer === normalizedB.from_layer &&\n    normalizedA.to_layer === normalizedB.to_layer\n  )\n}\n\nconst shouldIncludeElement = ({\n  element,\n  is_plated,\n  layer_span,\n  layerCount,\n}: {\n  element: AnyCircuitElement\n  is_plated: boolean\n  layer_span?: DrillLayerSpan\n  layerCount: number\n}) => {\n  if (\n    element.type !== \"pcb_plated_hole\" &&\n    element.type !== \"pcb_hole\" &&\n    element.type !== \"pcb_via\"\n  ) {\n    return false\n  }\n\n  if (!is_plated) return element.type === \"pcb_hole\"\n  if (element.type === \"pcb_hole\") return false\n\n  const elementLayerSpan = getPlatedElementLayerSpan(element, layerCount)\n  if (!elementLayerSpan) return false\n  const requestedLayerSpan = getRequestedLayerSpan(layer_span)\n\n  return isSameLayerSpan(elementLayerSpan, requestedLayerSpan, layerCount)\n}\n\nconst getFileFunctionLayerSpan = ({\n  circuitJson,\n  is_plated,\n  layer_span,\n}: {\n  circuitJson: Array<AnyCircuitElement>\n  is_plated: boolean\n  layer_span?: DrillLayerSpan\n}) => {\n  const layerCount = getLayerCount(circuitJson)\n  if (!is_plated) return `NonPlated,1,${layerCount},NPTH`\n\n  const requestedLayerSpan = getRequestedLayerSpan(layer_span)\n  const span = normalizeLayerSpan(requestedLayerSpan, layerCount)\n  return `Plated,${getLayerNumber(span.from_layer, layerCount)},${getLayerNumber(span.to_layer, layerCount)},PTH`\n}\n\nconst getTraceRouteViaElements = (\n  circuitJson: Array<AnyCircuitElement>,\n): Array<AnyCircuitElement> => {\n  const routeVias: Array<AnyCircuitElement> = []\n\n  for (const element of circuitJson) {\n    if (element.type !== \"pcb_trace\") {\n      continue\n    }\n\n    for (const [index, point] of element.route.entries()) {\n      if (\n        point.route_type !== \"via\" ||\n        typeof point.hole_diameter !== \"number\" ||\n        typeof point.outer_diameter !== \"number\"\n      ) {\n        continue\n      }\n\n      routeVias.push({\n        type: \"pcb_via\",\n        pcb_via_id: `${element.pcb_trace_id}_route_via_${index}`,\n        x: point.x,\n        y: point.y,\n        hole_diameter: point.hole_diameter,\n        outer_diameter: point.outer_diameter,\n        from_layer: point.from_layer,\n        to_layer: point.to_layer,\n        layers: [point.from_layer, point.to_layer],\n      })\n    }\n  }\n\n  return routeVias\n}\n\nconst getDrillableElements = (circuitJson: Array<AnyCircuitElement>) => [\n  ...circuitJson,\n  ...getTraceRouteViaElements(circuitJson),\n]\n\nexport const convertSoupToExcellonDrillCommands = ({\n  circuitJson,\n  is_plated,\n  flip_y_axis = false,\n  layer_span,\n}: {\n  circuitJson: Array<AnyCircuitElement>\n  is_plated: boolean\n  flip_y_axis?: boolean\n  layer_span?: DrillLayerSpan\n}): Array<AnyExcellonDrillCommand> => {\n  const builder = excellonDrill()\n  const layerCount = getLayerCount(circuitJson)\n  const drillableElements = getDrillableElements(circuitJson)\n\n  // Start sequence commands\n  builder.add(\"M48\", {})\n\n  // Add header comments\n  const date_str = new Date().toISOString()\n  builder\n    .add(\"header_comment\", {\n      text: `DRILL file {tscircuit} date ${date_str}`,\n    })\n    .add(\"header_comment\", {\n      text: \"FORMAT={-:-/ absolute / metric / decimal}\",\n    })\n    .add(\"header_attribute\", {\n      attribute_name: \"TF.CreationDate\",\n      attribute_value: date_str,\n    })\n    .add(\"header_attribute\", {\n      attribute_name: \"TF.GenerationSoftware\",\n      attribute_value: \"tscircuit\",\n    })\n    .add(\"header_attribute\", {\n      attribute_name: \"TF.FileFunction\",\n      attribute_value: getFileFunctionLayerSpan({\n        circuitJson,\n        is_plated,\n        layer_span,\n      }),\n    })\n    .add(\"FMAT\", { format: 2 }) // Assuming format 2 for the example\n    .add(\"unit_format\", { unit: \"METRIC\", lz: null })\n\n  let tool_counter = 10 // Start tool numbering from 10 for example\n\n  const diameterToToolNumber: Record<number, number> = {}\n\n  // Define tools\n  for (const element of drillableElements) {\n    if (\n      !shouldIncludeElement({\n        element,\n        is_plated,\n        layer_span,\n        layerCount,\n      })\n    ) {\n      continue\n    }\n\n    const holeDiameter =\n      \"hole_diameter\" in element && typeof element.hole_diameter === \"number\"\n        ? element.hole_diameter\n        : \"hole_width\" in element &&\n            typeof element.hole_width === \"number\" &&\n            \"hole_height\" in element &&\n            typeof element.hole_height === \"number\"\n          ? Math.min(element.hole_width, element.hole_height)\n          : undefined\n\n    if (!holeDiameter) continue\n\n    if (!diameterToToolNumber[holeDiameter]) {\n      builder.add(\"aper_function_header\", {\n        is_plated,\n      })\n      builder.add(\"define_tool\", {\n        tool_number: tool_counter,\n        diameter: holeDiameter,\n      })\n      diameterToToolNumber[holeDiameter] = tool_counter\n      tool_counter++\n    }\n  }\n\n  builder.add(\"percent_sign\", {})\n  builder.add(\"G90\", {})\n  builder.add(\"G05\", {})\n\n  // --------------------\n  // Execute drills/slots\n  // --------------------\n  for (let i = 10; i < tool_counter; i++) {\n    builder.add(\"use_tool\", { tool_number: i })\n    for (const element of drillableElements) {\n      if (\n        element.type === \"pcb_plated_hole\" ||\n        element.type === \"pcb_hole\" ||\n        element.type === \"pcb_via\"\n      ) {\n        if (\n          !shouldIncludeElement({\n            element,\n            is_plated,\n            layer_span,\n            layerCount,\n          })\n        ) {\n          continue\n        }\n\n        const holeDiameter =\n          \"hole_diameter\" in element &&\n          typeof element.hole_diameter === \"number\"\n            ? element.hole_diameter\n            : \"hole_width\" in element &&\n                typeof element.hole_width === \"number\" &&\n                \"hole_height\" in element &&\n                typeof element.hole_height === \"number\"\n              ? Math.min(element.hole_width, element.hole_height)\n              : undefined\n\n        if (!holeDiameter || diameterToToolNumber[holeDiameter] !== i) {\n          continue\n        }\n\n        const elementX =\n          \"x\" in element && typeof element.x === \"number\" ? element.x : 0\n        const elementY =\n          \"y\" in element && typeof element.y === \"number\" ? element.y : 0\n        const offsetX =\n          \"hole_offset_x\" in element &&\n          typeof element.hole_offset_x === \"number\"\n            ? element.hole_offset_x\n            : 0\n        const offsetY =\n          \"hole_offset_y\" in element &&\n          typeof element.hole_offset_y === \"number\"\n            ? element.hole_offset_y\n            : 0\n        const centerX = elementX + offsetX\n        const centerY = elementY + offsetY\n        const yMultiplier = flip_y_axis ? -1 : 1\n\n        if (\n          \"hole_width\" in element &&\n          typeof element.hole_width === \"number\" &&\n          \"hole_height\" in element &&\n          typeof element.hole_height === \"number\"\n        ) {\n          const holeWidth = element.hole_width\n          const holeHeight = element.hole_height\n          const maxDim = Math.max(holeWidth, holeHeight)\n          const minDim = Math.min(holeWidth, holeHeight)\n\n          if (Math.abs(maxDim - minDim) <= 1e-6) {\n            builder.add(\"drill_at\", {\n              x: centerX,\n              y: centerY * yMultiplier,\n            })\n            continue\n          }\n\n          const rotationDegrees =\n            \"hole_ccw_rotation\" in element &&\n            typeof element.hole_ccw_rotation === \"number\"\n              ? element.hole_ccw_rotation\n              : \"ccw_rotation\" in element &&\n                  typeof element.ccw_rotation === \"number\"\n                ? element.ccw_rotation\n                : 0\n          const rotationRadians = (rotationDegrees * Math.PI) / 180\n          const cosTheta = Math.cos(rotationRadians)\n          const sinTheta = Math.sin(rotationRadians)\n\n          const isWidthMajor = holeWidth >= holeHeight\n          const slotHalfLength = (maxDim - minDim) / 2\n          const startRelative = isWidthMajor\n            ? { x: -slotHalfLength, y: 0 }\n            : { x: 0, y: -slotHalfLength }\n          const endRelative = isWidthMajor\n            ? { x: slotHalfLength, y: 0 }\n            : { x: 0, y: slotHalfLength }\n\n          const rotatePoint = ({ x, y }: { x: number; y: number }) => ({\n            x: x * cosTheta - y * sinTheta,\n            y: x * sinTheta + y * cosTheta,\n          })\n\n          const startPoint = rotatePoint(startRelative)\n          const endPoint = rotatePoint(endRelative)\n\n          const startX = centerX + startPoint.x\n          const startY = (centerY + startPoint.y) * yMultiplier\n          const endX = centerX + endPoint.x\n          const endY = (centerY + endPoint.y) * yMultiplier\n\n          builder\n            .add(\"drill_at\", {\n              x: startX,\n              y: startY,\n            })\n            .add(\"G85\", {\n              x: endX,\n              y: endY,\n              width: minDim,\n            })\n          continue\n        }\n\n        builder.add(\"drill_at\", {\n          x: centerX,\n          y: centerY * yMultiplier,\n        })\n      }\n    }\n  }\n\n  builder.add(\"M30\", {})\n\n  return builder.build()\n}\n\nconst getDrillLayerSpanKey = (span: DrillLayerSpan, layerCount: number) => {\n  const normalizedSpan = normalizeLayerSpan(span, layerCount)\n  return `L${getLayerNumber(normalizedSpan.from_layer, layerCount)}-L${getLayerNumber(normalizedSpan.to_layer, layerCount)}`\n}\n\nconst hasDrillGeometry = (element: AnyCircuitElement) => {\n  if (\"hole_diameter\" in element && typeof element.hole_diameter === \"number\") {\n    return true\n  }\n\n  return (\n    \"hole_width\" in element &&\n    typeof element.hole_width === \"number\" &&\n    \"hole_height\" in element &&\n    typeof element.hole_height === \"number\"\n  )\n}\n\nexport const convertSoupToExcellonDrillCommandLayers = ({\n  circuitJson,\n  flip_y_axis = false,\n}: {\n  circuitJson: Array<AnyCircuitElement>\n  flip_y_axis?: boolean\n}): Record<string, Array<AnyExcellonDrillCommand>> => {\n  const layerCount = getLayerCount(circuitJson)\n  const platedSpans = new Map(\n    getDrillableElements(circuitJson).flatMap(\n      (element): Array<[string, DrillLayerSpan]> => {\n        const span = getPlatedElementLayerSpan(element, layerCount)\n        if (!span) {\n          return []\n        }\n        return [[getDrillLayerSpanKey(span, layerCount), span]]\n      },\n    ),\n  )\n  const platedDrillLayers = Object.fromEntries(\n    [...platedSpans.entries()].sort().map(([spanKey, span]) => [\n      `drill-${spanKey}.drl`,\n      convertSoupToExcellonDrillCommands({\n        circuitJson,\n        is_plated: true,\n        flip_y_axis,\n        layer_span: span,\n      }),\n    ]),\n  )\n  const hasNonPlatedDrill = circuitJson.some((element) => {\n    if (element.type !== \"pcb_hole\") {\n      return false\n    }\n\n    return hasDrillGeometry(element)\n  })\n\n  if (!hasNonPlatedDrill) {\n    return platedDrillLayers\n  }\n\n  return {\n    ...platedDrillLayers,\n    \"drill_npth.drl\": convertSoupToExcellonDrillCommands({\n      circuitJson,\n      is_plated: false,\n      flip_y_axis,\n    }),\n  }\n}\n","import { z } from \"zod\"\nimport { defineGerberCommand } from \"../define-gerber-command\"\n\nexport const add_attribute_on_aperture = defineGerberCommand({\n  command_code: \"TA\",\n  schema: z\n    .object({\n      command_code: z.literal(\"TA\").default(\"TA\"),\n      attribute_name: z.string(),\n      attribute_value: z.string(),\n    })\n    .describe(\n      \"Add attribute on aperture: Add an aperture attribute to the dictionary or modify it.\",\n    ),\n  stringify: ({ attribute_name, attribute_value }) => {\n    return `%TA${attribute_name},${attribute_value}*%`\n  },\n})\n","import type { AnyZodObject, z, ZodObject, ZodUnion } from \"zod\"\n\nexport interface GerberCommandDef<\n  K extends string,\n  T extends AnyZodObject | z.ZodIntersection<any, any>,\n> {\n  command_code: K\n  schema: T\n  stringify: (c: z.infer<T>) => string\n}\n\nexport const defineGerberCommand = <\n  K extends string,\n  T extends AnyZodObject | z.ZodIntersection<any, any>,\n>({\n  command_code,\n  schema,\n  stringify,\n}: {\n  command_code: K\n  schema: T\n  stringify: (c: z.infer<T>) => string\n}): GerberCommandDef<K, T> => {\n  return {\n    command_code,\n    schema,\n    stringify,\n  }\n}\n","import { z } from \"zod\"\nimport { defineGerberCommand } from \"../define-gerber-command\"\n\nexport const add_attribute_on_file = defineGerberCommand({\n  command_code: \"TF\",\n  schema: z\n    .object({\n      command_code: z.literal(\"TF\").default(\"TF\"),\n      attribute_name: z.string(),\n      attribute_value: z.string(),\n    })\n    .describe(\"Add attribute on file: Set a file attribute.\"),\n  stringify: ({ attribute_name, attribute_value }) => {\n    return `%TF.${attribute_name},${attribute_value}*%`\n  },\n})\n","import { z } from \"zod\"\nimport { defineGerberCommand } from \"../define-gerber-command\"\n\nexport const add_attribute_on_object = defineGerberCommand({\n  command_code: \"TO\",\n  schema: z\n    .object({\n      command_code: z.literal(\"TO\").default(\"TO\"),\n      attribute_name: z.string(),\n      attribute_value: z.string(),\n    })\n    .describe(\n      \"Add attribute on object: Add an object attribute to the dictionary or modify it.\",\n    ),\n  stringify: ({ attribute_name, attribute_value }) => {\n    return `%TO${attribute_name},${attribute_value}*%`\n  },\n})\n\nexport type AddAttributeOnObject = z.infer<\n  typeof add_attribute_on_object.schema\n>\n","import { z } from \"zod\"\nimport { defineGerberCommand } from \"../define-gerber-command\"\n\nexport const aperture_block = defineGerberCommand({\n  command_code: \"AB\",\n  schema: z\n    .object({\n      command_code: z.literal(\"AB\").default(\"AB\"),\n      block: z.string(),\n    })\n    .describe(\n      \"Aperture block: Opens a block aperture statement and assigns its aperture number or closes a block aperture statement\",\n    ),\n  stringify() {\n    return \"\"\n  },\n})\n\nexport type ApertureBlock = z.infer<typeof aperture_block.schema>\n","import { z } from \"zod\"\nimport { defineGerberCommand } from \"../define-gerber-command\"\n\nexport const comment = defineGerberCommand({\n  command_code: \"G04\",\n  schema: z\n    .object({\n      command_code: z.literal(\"G04\").default(\"G04\"),\n      comment: z.string(),\n    })\n    .describe(\n      \"Comment: A human readable comment, does not affect the image. 4.1\",\n    ),\n  stringify: (c) => {\n    return `G04 ${c.comment}*`\n  },\n})\n\nexport type Comment = z.infer<typeof comment.schema>\n","import { z } from \"zod\"\nimport { defineGerberCommand } from \"../define-gerber-command\"\n\nexport const create_arc = defineGerberCommand({\n  command_code: \"G75\",\n  schema: z\n    .object({\n      command_code: z.literal(\"G75\").default(\"G75\"),\n    })\n    .describe(\n      \"Create arc: A G75 must be called before creating the first arc.\",\n    ),\n  stringify() {\n    return \"G75*\"\n  },\n})\n\nexport type CreateArc = z.infer<typeof create_arc.schema>\n","import { z } from \"zod\"\nimport { defineGerberCommand } from \"../define-gerber-command\"\n\nexport const define_aperture = defineGerberCommand({\n  command_code: \"AD\",\n  schema: z\n    .object({\n      command_code: z.literal(\"AD\").default(\"AD\"),\n      aperture_code: z.string(),\n    })\n    .describe(\n      \"Aperture define: Defines a template-based aperture, assigns a D code to it. 4.3\",\n    ),\n  stringify() {\n    return \"\"\n  },\n})\n\nexport type DefineAperture = z.infer<typeof define_aperture.schema>\n","import { z } from \"zod\"\nimport { defineGerberCommand } from \"../define-gerber-command\"\n\nexport const define_macro_aperture_template = defineGerberCommand({\n  command_code: \"AM\",\n  schema: z\n    .object({\n      command_code: z.literal(\"AM\").default(\"AM\"),\n      macro_name: z.string(),\n      template_code: z.string(),\n    })\n    .describe(\"Aperture macro: Defines a macro aperture template. 4.5\"),\n  stringify({ macro_name, template_code }) {\n    return `%AM${macro_name}*\\n${template_code}%`\n  },\n})\n\nexport type DefineMacroApertureTemplate = z.infer<\n  typeof define_macro_aperture_template.schema\n>\n","import { z } from \"zod\"\nimport { defineGerberCommand } from \"../define-gerber-command\"\n\nexport const delete_attribute = defineGerberCommand({\n  command_code: \"TD\",\n  schema: z\n    .object({\n      command_code: z.literal(\"TD\").default(\"TD\"),\n      attribute: z.string().optional(),\n    })\n    .describe(\n      \"Delete attribute: Attribute delete Delete one or all attributes in the dictionary.\",\n    ),\n  stringify({ attribute }) {\n    if (!attribute) {\n      return \"%TD*%\"\n    }\n    return `%TD${attribute}*%`\n  },\n})\n","import { z } from \"zod\"\nimport { defineGerberCommand } from \"../define-gerber-command\"\n\nexport const end_of_file = defineGerberCommand({\n  command_code: \"M02\",\n  schema: z\n    .object({\n      command_code: z.literal(\"M02\").default(\"M02\"),\n    })\n    .describe(\"End of file: 4.13\"),\n  stringify() {\n    return \"M02*\"\n  },\n})\n","import { z } from \"zod\"\nimport { defineGerberCommand } from \"../define-gerber-command\"\n\nexport const end_region_statement = defineGerberCommand({\n  command_code: \"G37\",\n  schema: z\n    .object({\n      command_code: z.literal(\"G37\").default(\"G37\"),\n    })\n    .describe(\"End region statement: Ends the region statement\"),\n  stringify() {\n    return \"G37*\"\n  },\n})\n\nexport type EndRegionStatement = z.infer<typeof end_region_statement.schema>\n","import { z } from \"zod\"\nimport { defineGerberCommand } from \"../define-gerber-command\"\nimport { getGerberCoordinateWithPadding } from \"../stringify-gerber/get-gerber-coordinate-with-padding\"\n\nexport const flash_operation = defineGerberCommand({\n  command_code: \"D03\",\n  schema: z\n    .object({\n      command_code: z.literal(\"D03\").default(\"D03\"),\n      x: z.number(),\n      y: z.number(),\n    })\n    .describe(\n      \"Flash operation: Creates a flash object with the current aperture. The current point is moved to the flash point.\",\n    ),\n  stringify({ x, y }) {\n    const [gx, gy] = [x, y].map((coord) =>\n      getGerberCoordinateWithPadding(coord),\n    )\n    return `X${gx}Y${gy}D03*`\n  },\n})\n\nexport type FlashOperation = z.infer<typeof flash_operation.schema>\n","/**\n * Retrieves the Gerber coordinate with padding.\n *\n * Example Gerber coordinate strings:\n * full string: X110550000Y-85000000D03*\n * formatted coordinate for X: 110550000\n *\n * Example inputs/outputs:\n * input: 110.55\n * output: 110550000\n *\n * @param coordinate_mm - The coordinate value in millimeters.\n * @returns The Gerber coordinate with padding.\n */\nexport const getGerberCoordinateWithPadding = (\n  coordinate_mm: number,\n): string => {\n  const coordinate_um = coordinate_mm * 1000000 // Convert millimeters to micrometers\n  let coordinate_str = coordinate_um.toFixed(0) // Convert to string without decimal places\n  // add left padding\n  while (coordinate_str.length < 9) {\n    if (coordinate_um < 0) {\n      coordinate_str = `-0${coordinate_str.slice(1)}`\n    } else {\n      coordinate_str = `0${coordinate_str}`\n    }\n  }\n  return coordinate_str\n}\n","import { z } from \"zod\"\n\nexport const load_mirroring = z\n  .object({\n    command_code: z.literal(\"LM\"),\n    mirroring: z.string(),\n  })\n  .describe(\"Load mirroring: Loads the mirror object transformation parameter.\")\n\nexport type LoadMirroring = z.infer<typeof load_mirroring>\n","import { z } from \"zod\"\n\nexport const load_polarity = z\n  .object({\n    command_code: z.literal(\"LP\"),\n    polarity: z.string(),\n  })\n  .describe(\n    \"Load polarity: Loads the polarity object transformation parameter.\",\n  )\n\nexport type LoadPolarity = z.infer<typeof load_polarity>\n","import { z } from \"zod\"\nimport { defineGerberCommand } from \"../define-gerber-command\"\n\nexport const load_rotation = defineGerberCommand({\n  command_code: \"LR\",\n  schema: z\n    .object({\n      command_code: z.literal(\"LR\").default(\"LR\"),\n      rotation_degrees: z.number(),\n    })\n    .describe(\n      \"Load rotation: Loads the rotation object transformation parameter.\",\n    ),\n  stringify: ({ rotation_degrees }) => {\n    return `%LR${rotation_degrees}*%`\n  },\n})\n\nexport type LoadRotation = z.infer<typeof load_rotation.schema>\n","import { z } from \"zod\"\n\nexport const load_scaling = z\n  .object({\n    command_code: z.literal(\"LS\"),\n    scaling: z.string(),\n  })\n  .describe(\"Load scaling: Loads the scale object transformation parameter.\")\n\nexport type LoadScaling = z.infer<typeof load_scaling>\n","import { getGerberCoordinateWithPadding } from \"./../stringify-gerber/get-gerber-coordinate-with-padding\"\nimport { z } from \"zod\"\nimport { defineGerberCommand } from \"../define-gerber-command\"\n\nexport const move_operation = defineGerberCommand({\n  command_code: \"D02\",\n  schema: z\n    .object({\n      command_code: z.literal(\"D02\").default(\"D02\"),\n      x: z.number(),\n      y: z.number(),\n    })\n    .describe(\n      \"Move operation: D02 moves the current point to the coordinate in the command. It does not create an object.\",\n    ),\n  stringify({ x, y }) {\n    const [gx, gy] = [x, y].map((coord) =>\n      getGerberCoordinateWithPadding(coord),\n    )\n    return `X${gx}Y${gy}D02*`\n  },\n})\n","import { z } from \"zod\"\nimport { defineGerberCommand } from \"../define-gerber-command\"\nimport { getGerberCoordinateWithPadding } from \"../stringify-gerber/get-gerber-coordinate-with-padding\"\n\nexport const plot_operation = defineGerberCommand({\n  command_code: \"D01\",\n  schema: z\n    .object({\n      command_code: z.literal(\"D01\").default(\"D01\"),\n      x: z.number(),\n      y: z.number(),\n      i: z.number().optional(),\n      j: z.number().optional(),\n    })\n    .describe(\n      \"Plot operation: Outside a region statement D01 creates a draw or arc object with the current aperture. Inside it adds a draw/arc segment to the contour under construction. The current point is moved to draw/arc end point after the creation of the draw/arc.\",\n    ),\n  stringify({ x, y, i, j }) {\n    const gx = getGerberCoordinateWithPadding(x)\n    const gy = getGerberCoordinateWithPadding(y)\n    let cmd = `X${gx}Y${gy}`\n    if (i !== undefined && j !== undefined) {\n      const gi = getGerberCoordinateWithPadding(i)\n      const gj = getGerberCoordinateWithPadding(j)\n      cmd += `I${gi}J${gj}`\n    }\n    return `${cmd}D01*`\n  },\n})\n","import { z } from \"zod\"\n\nexport const set_coordinate_format = z\n  .object({\n    command_code: z.literal(\"FS\"),\n    format: z.string(),\n  })\n  .describe(\"Sets the coordinate format, e.g. the number of decimals.\")\nexport type SetCoordinateFormat = z.infer<typeof set_coordinate_format>\n","import { z } from \"zod\"\n\nexport const set_current_aperture_d_code = z\n  .object({\n    command_code: z.literal(\"Dnn\"),\n    d_code: z.string(),\n  })\n  .describe(\"(nn≥10) Sets the current aperture to D code nn. 4.6\")\n\nexport type SetCurrentApertureDCode = z.infer<\n  typeof set_current_aperture_d_code\n>\n","import { z } from \"zod\"\nimport { defineGerberCommand } from \"../define-gerber-command\"\n\nexport const set_movement_mode_to_clockwise_circular = defineGerberCommand({\n  command_code: \"G02\",\n  schema: z\n    .object({\n      command_code: z.literal(\"G02\").default(\"G02\"),\n    })\n    .describe(\n      \"Set movement mode to clockwise circular: Sets linear/circular mode to clockwise circular.\",\n    ),\n  stringify() {\n    return \"G02*\"\n  },\n})\n","import { z } from \"zod\"\nimport { defineGerberCommand } from \"../define-gerber-command\"\n\nexport const set_movement_mode_to_counterclockwise_circular =\n  defineGerberCommand({\n    command_code: \"G03\", // Add the missing command_code property\n    schema: z\n      .object({\n        command_code: z.literal(\"G03\").default(\"G03\"),\n      })\n      .describe(\n        \"Set movement mode to counterclockwise circular: Sets linear/circular mode to counterclockwise circular.\",\n      ),\n    stringify() {\n      return \"G03*\"\n    },\n  })\n","import { z } from \"zod\"\nimport { defineGerberCommand } from \"../define-gerber-command\"\n\nexport const set_movement_mode_to_linear = defineGerberCommand({\n  command_code: \"G01\",\n  schema: z\n    .object({\n      command_code: z.literal(\"G01\").default(\"G01\"),\n    })\n    .describe(\n      \"Set movement mode to linear: Sets linear/circular mode to linear.\",\n    ),\n  stringify() {\n    return \"G01*\"\n  },\n})\n","import { z } from \"zod\"\nimport { defineGerberCommand } from \"../define-gerber-command\"\n\nexport const set_unit = defineGerberCommand({\n  command_code: \"MO\",\n  schema: z\n    .object({\n      command_code: z.literal(\"MO\").default(\"MO\"),\n      unit: z.enum([\"MM\", \"in\"]),\n    })\n    .describe(\"Mode: Sets the unit to mm or inch. 4.2.1\"),\n  stringify({ unit }) {\n    return `%MO${unit}*%`\n  },\n})\n","import { z } from \"zod\"\nimport { defineGerberCommand } from \"../define-gerber-command\"\n\nexport const start_region_statement = defineGerberCommand({\n  command_code: \"G36\",\n  schema: z\n    .object({\n      command_code: z.literal(\"G36\").default(\"G36\"),\n    })\n    .describe(\n      \"Start region statement: Starts a region statement which creates a region by defining its contours.\",\n    ),\n  stringify() {\n    return \"G36*\"\n  },\n})\n\nexport type StartRegionStatement = z.infer<typeof start_region_statement.schema>\n","import { z } from \"zod\"\n\nexport const step_and_repeat = z\n  .object({\n    command_code: z.literal(\"SR\"),\n    statement: z.string(),\n  })\n  .describe(\"Step and repeat: Open or closes a step and repeat statement.\")\n\nexport type StepAndRepeat = z.infer<typeof step_and_repeat>\n","import { z } from \"zod\"\nimport { defineGerberCommand } from \"../define-gerber-command\"\n\nexport const format_specification = defineGerberCommand({\n  command_code: \"FS\",\n  schema: z.object({\n    command_code: z.literal(\"FS\").default(\"FS\"),\n    zero_omission_mode: z\n      .union([z.literal(\"L\").describe(\"leading zeros omitted\"), z.literal(\"T\")])\n      .nullable()\n      .default(null),\n    coordinate_notation: z\n      .union([\n        z.literal(\"A\").describe(\"absolute notation\"),\n        z.literal(\"I\").describe(\"incremental notation\"),\n      ])\n      .default(\"A\"),\n    x_integer_digits: z.number().int().default(4),\n    x_decimal_digits: z.number().int().default(6),\n    y_integer_digits: z.number().int().default(4),\n    y_decimal_digits: z.number().int().default(6),\n  }),\n  stringify: () => {\n    return \"%FSLAX46Y46*%\"\n  },\n})\n\nexport type FormatSpecification = z.infer<typeof format_specification.schema>\n","import { z } from \"zod\"\nimport { defineGerberCommand } from \"../define-gerber-command\"\n\nexport const set_layer_polarity = defineGerberCommand({\n  command_code: \"LP\",\n  schema: z\n    .object({\n      command_code: z.literal(\"LP\").default(\"LP\"),\n      polarity: z.enum([\"D\", \"C\"]),\n    })\n    .describe(\n      \"Layer Polarity: Sets the layer polarity to dark or clear. 4.2.1\",\n    ),\n  stringify({ polarity }) {\n    return `%LP${polarity}*%`\n  },\n})\n","import { z } from \"zod\"\nimport { defineGerberCommand } from \"../define-gerber-command\"\nimport { getGerberCoordinateWithPadding } from \"../stringify-gerber/get-gerber-coordinate-with-padding\"\n\nconst circle_template = z.object({\n  standard_template_code: z.literal(\"C\").describe(\"circle\"),\n  diameter: z.number(),\n  hole_diameter: z.number().optional(),\n})\n\nconst rectangle_template = z.object({\n  standard_template_code: z.literal(\"R\").describe(\"rectangle\"),\n  x_size: z.number(),\n  y_size: z.number(),\n  hole_diameter: z.number().optional(),\n})\n\nconst obround_template = z.object({\n  standard_template_code: z.literal(\"O\").describe(\"obround\"),\n  x_size: z.number(),\n  y_size: z.number(),\n  hole_diameter: z.number().optional(),\n})\n\nconst polygon_template = z.object({\n  standard_template_code: z.literal(\"P\").describe(\"polygon\"),\n  outer_diameter: z.number(),\n  number_of_vertices: z.number().int(),\n  rotation: z.number().optional(),\n  hole_diameter: z.number().optional(),\n})\n\nconst standard_aperture_template_config = z.discriminatedUnion(\n  \"standard_template_code\",\n  [circle_template, rectangle_template, obround_template, polygon_template],\n)\n\nconst horz_pill_template = z.object({\n  macro_name: z.literal(\"HORZPILL\"),\n  x_size: z.number(),\n  y_size: z.number(),\n  circle_diameter: z.number(),\n  circle_center_offset: z.number(),\n})\n\nconst vert_pill_template = z.object({\n  macro_name: z.literal(\"VERTPILL\"),\n  x_size: z.number(),\n  y_size: z.number(),\n  circle_diameter: z.number(),\n  circle_center_offset: z.number(),\n})\n\nconst roundrect_template = z.object({\n  macro_name: z.literal(\"ROUNDRECT\"),\n  corner_radius: z.number(),\n  corner_1_x: z.number(),\n  corner_1_y: z.number(),\n  corner_2_x: z.number(),\n  corner_2_y: z.number(),\n  corner_3_x: z.number(),\n  corner_3_y: z.number(),\n  corner_4_x: z.number(),\n  corner_4_y: z.number(),\n})\n\nconst macro_aperture_template_config = z.discriminatedUnion(\"macro_name\", [\n  horz_pill_template,\n  vert_pill_template,\n  roundrect_template,\n])\n\nconst aperture_template_config = z.union([\n  standard_aperture_template_config,\n  macro_aperture_template_config,\n])\n\nexport const define_aperture_template = defineGerberCommand({\n  command_code: \"ADD\",\n  schema: aperture_template_config.and(\n    z.object({\n      command_code: z.literal(\"ADD\").default(\"ADD\"),\n      aperture_number: z.number().int(),\n    }),\n  ),\n  stringify(props) {\n    if (\"macro_name\" in props) {\n      const { aperture_number, macro_name } = props\n      let commandString = `%ADD${aperture_number}${macro_name},`\n\n      if (macro_name === \"HORZPILL\" || macro_name === \"VERTPILL\") {\n        commandString += `${props.x_size.toFixed(6)}X${props.y_size.toFixed(6)}X${props.circle_diameter.toFixed(6)}X${props.circle_center_offset.toFixed(6)}`\n      } else if (macro_name === \"ROUNDRECT\") {\n        // Handle ROUNDRECT if needed\n        throw new Error(\"ROUNDRECT macro not implemented yet\")\n      }\n\n      commandString += \"*%\"\n      return commandString\n    }\n    if (\"standard_template_code\" in props) {\n      const { aperture_number, standard_template_code } = props\n      let commandString = `%ADD${aperture_number}${standard_template_code},`\n\n      if (standard_template_code === \"C\") {\n        commandString += `${props.diameter.toFixed(6)}`\n      } else if (\n        standard_template_code === \"R\" ||\n        standard_template_code === \"O\"\n      ) {\n        commandString += `${props.x_size.toFixed(6)}X${props.y_size.toFixed(6)}`\n      } else if (standard_template_code === \"P\") {\n        commandString += `${props.outer_diameter}X${props.number_of_vertices}X${\n          props.rotation ? `X${props.rotation}` : \"\"\n        }`\n      }\n\n      if (props.hole_diameter) {\n        commandString += `X${props.hole_diameter.toFixed(6)}`\n      }\n\n      commandString += \"*%\"\n\n      return commandString\n    }\n    throw new Error(\n      `Invalid aperture template config: ${JSON.stringify(props)}`,\n    )\n  },\n})\n\nexport type DefineAperatureTemplateCommand = z.infer<\n  typeof define_aperture_template.schema\n>\n\nexport type ApertureTemplateConfig = z.infer<typeof aperture_template_config>\n","import { z } from \"zod\"\nimport { defineGerberCommand } from \"../define-gerber-command\"\n\nexport const select_aperture = defineGerberCommand({\n  command_code: \"D\",\n  schema: z.object({\n    command_code: z.literal(\"D\").default(\"D\"),\n    aperture_number: z.number().int(),\n  }),\n  stringify({ aperture_number }) {\n    return `D${aperture_number}*`\n  },\n})\n","import type { GerberCommandDef } from \"./define-gerber-command\"\nimport type { z } from \"zod\"\n\nimport { add_attribute_on_aperture } from \"./commands/add_attribute_on_aperture\"\nimport { add_attribute_on_file } from \"./commands/add_attribute_on_file\"\nimport { add_attribute_on_object } from \"./commands/add_attribute_on_object\"\nimport { aperture_block } from \"./commands/aperture_block\"\nimport { comment } from \"./commands/comment\"\nimport { create_arc } from \"./commands/create_arc\"\nimport { define_aperture } from \"./commands/define_aperture\"\nimport { define_macro_aperture_template } from \"./commands/define_macro_aperture_template\"\nimport { delete_attribute } from \"./commands/delete_attribute\"\nimport { end_of_file } from \"./commands/end_of_file\"\nimport { end_region_statement } from \"./commands/end_region_statement\"\nimport { flash_operation } from \"./commands/flash_operation\"\nimport { load_mirroring } from \"./commands/load_mirroring\"\nimport { load_polarity } from \"./commands/load_polarity\"\nimport { load_rotation } from \"./commands/load_rotation\"\nimport { load_scaling } from \"./commands/load_scaling\"\nimport { move_operation } from \"./commands/move_operation\"\nimport { plot_operation } from \"./commands/plot_operation\"\nimport { set_coordinate_format } from \"./commands/set_coordinate_format\"\nimport { set_current_aperture_d_code } from \"./commands/set_current_aperture_d_code\"\nimport { set_movement_mode_to_clockwise_circular } from \"./commands/set_movement_mode_to_clockwise_circular\"\nimport { set_movement_mode_to_counterclockwise_circular } from \"./commands/set_movement_mode_to_counterclockwise_circular\"\nimport { set_movement_mode_to_linear } from \"./commands/set_movement_mode_to_linear\"\nimport { set_unit } from \"./commands/set_unit\"\nimport { start_region_statement } from \"./commands/start_region_statement\"\nimport { step_and_repeat } from \"./commands/step_and_repeat\"\nimport { format_specification } from \"./commands/format_specification\"\nimport { set_layer_polarity } from \"./commands/set_layer_polarity\"\nimport { define_aperture_template } from \"./commands/define_aperture_template\"\nimport { select_aperture } from \"./commands/select_aperture\"\n\nexport const gerber_command_map = {\n  add_attribute_on_aperture,\n  add_attribute_on_file,\n  add_attribute_on_object,\n  aperture_block,\n  comment,\n  create_arc,\n  define_aperture,\n  define_macro_aperture_template,\n  delete_attribute,\n  end_of_file,\n  move_operation,\n  flash_operation,\n  end_region_statement,\n  format_specification,\n  // load_mirroring,\n  // load_polarity,\n  load_rotation,\n  // load_scaling,\n  plot_operation,\n  // set_coordinate_format,\n  // set_current_aperture_d_code,\n  define_aperture_template,\n  set_movement_mode_to_clockwise_circular,\n  set_movement_mode_to_counterclockwise_circular,\n  set_movement_mode_to_linear,\n  select_aperture,\n  set_unit,\n  set_layer_polarity,\n  start_region_statement,\n  // step_and_repeat,\n} as const satisfies Record<string, GerberCommandDef<any, any>>\n\nexport type AnyGerberCommand = z.infer<\n  (typeof gerber_command_map)[keyof typeof gerber_command_map][\"schema\"]\n>\n","import type { AnyGerberCommand } from \"./any_gerber_command\"\nimport type { z } from \"zod\"\nimport { gerber_command_map } from \"./any_gerber_command\"\n\nexport const gerberBuilder = () => new GerberBuilder()\n\nclass GerberBuilder {\n  commands: Array<AnyGerberCommand>\n\n  constructor() {\n    this.commands = []\n  }\n\n  $if(\n    condition: boolean,\n    fn: (gb: GerberBuilder) => GerberBuilder,\n  ): GerberBuilder {\n    if (condition) {\n      return fn(this)\n    }\n    return this\n  }\n\n  add<T extends keyof typeof gerber_command_map>(\n    cmd: T,\n    props: z.input<(typeof gerber_command_map)[T][\"schema\"]>,\n  ): GerberBuilder {\n    this.commands.push({\n      ...({ command_code: gerber_command_map[cmd].command_code } as any),\n      ...props,\n    })\n    return this\n  }\n\n  build(): Array<AnyGerberCommand> {\n    return this.commands\n  }\n}\n\n// Type test:\n// gerber()\n//   .add(\"add_attribute_on_aperture\", {\n//     attribute_name: \"foo\",\n//     attribute_value: \"bar\",\n//   })\n//   .add(\"end_of_file\", {})\n//   .build()\n","import type { AnyGerberCommand } from \"../any_gerber_command\"\nimport { gerber_command_map } from \"../any_gerber_command\"\n\nexport const stringifyGerberCommand = (command: AnyGerberCommand): string => {\n  const command_def = Object.values(gerber_command_map).find(\n    (cmd) => cmd.command_code === command.command_code,\n  )\n\n  if (!command_def) {\n    throw new Error(\n      `Command for command_code:\"${command.command_code}\" not found`,\n    )\n  }\n\n  if (!command_def.stringify) {\n    throw new Error(\n      `Command for command_code:\"${command.command_code}\" does not have a stringify method`,\n    )\n  }\n\n  return command_def.stringify(command as any)\n}\n","import type { AnyGerberCommand } from \"../any_gerber_command\"\nimport { stringifyGerberCommand } from \"./stringify-gerber-command\"\n\nexport const stringifyGerberCommandLayers = (\n  commandLayers: Record<string, AnyGerberCommand[]>,\n): Record<string, string> => {\n  const stringifiedCommandLayers: Record<string, string> = {}\n  for (const layerName of Object.keys(commandLayers)) {\n    stringifiedCommandLayers[layerName] = commandLayers[layerName]\n      .map((command) => {\n        return stringifyGerberCommand(command)\n      })\n      .join(\"\\n\")\n  }\n  return stringifiedCommandLayers\n}\n","import type { AnyGerberCommand } from \"../any_gerber_command\"\nimport { stringifyGerberCommand } from \"./stringify-gerber-command\"\n\nexport const stringifyGerberCommands = (\n  commands: AnyGerberCommand[],\n): string => {\n  return commands\n    .map((command) => {\n      return stringifyGerberCommand(command)\n    })\n    .join(\"\\n\")\n}\n","/**\n * Return pairs of adjacent elements in an array.\n */\nexport function pairs<T>(arr: Array<T>): Array<[T, T]> {\n  const result: Array<[T, T]> = []\n  for (let i = 0; i < arr.length - 1; i++) {\n    result.push([arr[i], arr[i + 1]])\n  }\n  return result\n}\n","import type { AnyGerberCommand } from \"../any_gerber_command\"\nimport { gerberBuilder } from \"../gerber-builder\"\n\nexport const defineCommonMacros = (glayer: Array<AnyGerberCommand>) => {\n  glayer.push(\n    ...gerberBuilder()\n      .add(\"comment\", { comment: \"APERTURE MACROS START\" })\n      .add(\"define_macro_aperture_template\", {\n        macro_name: \"HORZPILL\",\n        template_code: `\n0 Horizontal pill (stadium) shape macro*\n0 Parameters:*\n0 $1 = Total width*\n0 $2 = Total height*\n0 $3 = Circle diameter (equal to height)*\n0 $4 = Circle center offset\n0 21 = Center Line(Exposure, Width, Height, Center X, Center Y, Rotation)*\n0 1 = Circle(Exposure, Diameter, Center X, Center Y, Rotation)*\n21,1,$1,$2,0.0,0.0,0.0*\n1,1,$3,0.0-$4,0.0*\n1,1,$3,$4,0.0*\n`.trim(),\n      })\n      .add(\"define_macro_aperture_template\", {\n        macro_name: \"VERTPILL\",\n        template_code: `\n0 Vertical pill (stadium) shape macro*\n0 Parameters:*\n0 $1 = Total width*\n0 $2 = Total height*\n0 $3 = Circle diameter (equal to width)*\n0 $4 = Circle center offset\n0 21 = Center Line(Exposure, Width, Height, Center X, Center Y, Rotation)*\n21,1,$1,$2,0.0,0.0,0.0*\n1,1,$3,0.0,0.0-$4*\n1,1,$3,0.0,$4*\n`.trim(),\n      })\n      .add(\"define_macro_aperture_template\", {\n        macro_name: \"RoundRect\",\n        template_code: `\n0 Rectangle with rounded corners*\n0 $1 Corner radius*\n0 $2 $3 $4 $5 $6 $7 $8 $9 X,Y Position of each corner*\n0 Polygon box body*\n4,1,4,$2,$3,$4,$5,$6,$7,$8,$9,$2,$3,0*\n0 Circles for rounded corners*\n1,1,$1+$1,$2,$3*\n1,1,$1+$1,$4,$5*\n1,1,$1+$1,$6,$7*\n1,1,$1+$1,$8,$9*\n0 Rectangles between the rounded corners*\n20,1,$1+$1,$2,$3,$4,$5,0*\n20,1,$1+$1,$4,$5,$6,$7,0*\n20,1,$1+$1,$6,$7,$8,$9,0*\n20,1,$1+$1,$8,$9,$2,$3,0*\n`.trim(),\n      })\n      .add(\"comment\", { comment: \"APERTURE MACROS END\" })\n      .build(),\n  )\n}\n","import type {\n  PCBHole,\n  LayerRef,\n  PCBPlatedHole,\n  PCBSMTPad,\n  PcbCopperText,\n  PcbHole,\n  PcbSolderPaste,\n  PcbSilkscreenPath,\n  PcbSilkscreenText,\n} from \"circuit-json\"\nimport stableStringify from \"fast-json-stable-stringify\"\nimport type { AnyGerberCommand } from \"../any_gerber_command\"\nimport type { ApertureTemplateConfig } from \"../commands/define_aperture_template\"\nimport { gerberBuilder } from \"../gerber-builder\"\nimport type { GerberLayerName } from \"./GerberLayerName\"\nimport { getAllTraceWidths } from \"./getAllTraceWidths\"\nimport type { AnyCircuitElement } from \"circuit-json\"\n\nconst getLayerRefFromGerberLayerName = (\n  glayer_name: GerberLayerName,\n): LayerRef => {\n  if (glayer_name.startsWith(\"F_\")) return \"top\"\n  if (glayer_name.startsWith(\"B_\")) return \"bottom\"\n\n  const innerLayerMatch = glayer_name.match(/^In([1-6])_/)\n  if (innerLayerMatch) return `inner${innerLayerMatch[1]}` as LayerRef\n\n  throw new Error(`Could not infer layer ref from ${glayer_name}`)\n}\n\nexport function defineAperturesForLayer({\n  glayer,\n  circuitJson,\n  glayer_name,\n}: {\n  glayer: AnyGerberCommand[]\n  circuitJson: AnyCircuitElement[]\n  glayer_name: GerberLayerName\n}) {\n  const getNextApertureNumber = () => {\n    const highest_aperture_number = glayer.reduce((acc, command) => {\n      if (command.command_code === \"ADD\") {\n        return Math.max(acc, command.aperture_number)\n      }\n      return acc\n    }, 0)\n    if (highest_aperture_number === 0) {\n      return 10\n    }\n    return highest_aperture_number + 1\n  }\n\n  glayer.push(\n    ...gerberBuilder()\n      .add(\"comment\", { comment: \"aperture START LIST\" })\n      .build(),\n  )\n\n  // Add all trace width apertures\n  const traceWidths: Record<LayerRef, number[]> = getAllTraceWidths(circuitJson)\n  const layerRef = getLayerRefFromGerberLayerName(glayer_name)\n  for (const width of traceWidths[layerRef]) {\n    glayer.push(\n      ...gerberBuilder()\n        .add(\"define_aperture_template\", {\n          aperture_number: getNextApertureNumber(),\n          standard_template_code: \"C\",\n          diameter: width,\n        })\n        .build(),\n    )\n  }\n\n  // Add all pcb smtpad, plated hole etc. aperatures\n  const apertureConfigs = getAllApertureTemplateConfigsForLayer({\n    circuitJson,\n    layer: layerRef,\n    glayer_name,\n  })\n\n  for (const apertureConfig of apertureConfigs) {\n    glayer.push(\n      ...gerberBuilder()\n        .add(\"define_aperture_template\", {\n          aperture_number: getNextApertureNumber(),\n          ...apertureConfig,\n        })\n        .build(),\n    )\n  }\n\n  glayer.push(\n    ...gerberBuilder()\n      .add(\"delete_attribute\", {})\n      .add(\"comment\", { comment: \"aperture END LIST\" })\n      .build(),\n  )\n}\n\nexport const getApertureConfigFromPcbSmtpad = (\n  elm: PCBSMTPad,\n): ApertureTemplateConfig => {\n  if (elm.shape === \"rect\") {\n    return {\n      standard_template_code: \"R\",\n      x_size: elm.width,\n      y_size: elm.height,\n    }\n  }\n  if (elm.shape === \"circle\") {\n    return {\n      standard_template_code: \"C\",\n      diameter: elm.radius * 2,\n    }\n  }\n  if (elm.shape === \"rotated_rect\") {\n    // Rotation is handled by the LR command, not the aperture definition\n    return {\n      standard_template_code: \"R\",\n      x_size: elm.width,\n      y_size: elm.height,\n    }\n  }\n  if (elm.shape === \"polygon\") {\n    // Polygon shapes don't use apertures - they're drawn as regions\n    throw new Error(\"Polygon SMT pads are drawn as regions, not apertures\")\n  }\n  throw new Error(`Unsupported shape ${(elm as any).shape}`)\n}\n\nexport const getApertureConfigFromPcbSmtpadSoldermask = (\n  elm: PCBSMTPad,\n): ApertureTemplateConfig => {\n  let soldermaskMargin = 0\n  if (\"soldermask_margin\" in elm && typeof elm.soldermask_margin === \"number\") {\n    soldermaskMargin = elm.soldermask_margin\n  }\n\n  if (elm.shape === \"rect\") {\n    return {\n      standard_template_code: \"R\",\n      x_size: elm.width + soldermaskMargin * 2,\n      y_size: elm.height + soldermaskMargin * 2,\n    }\n  }\n  if (elm.shape === \"circle\") {\n    return {\n      standard_template_code: \"C\",\n      diameter: elm.radius * 2 + soldermaskMargin * 2,\n    }\n  }\n  if (elm.shape === \"rotated_rect\") {\n    return {\n      standard_template_code: \"R\",\n      x_size: elm.width + soldermaskMargin * 2,\n      y_size: elm.height + soldermaskMargin * 2,\n    }\n  }\n  if (elm.shape === \"polygon\") {\n    throw new Error(\"Polygon SMT pads are drawn as regions, not apertures\")\n  }\n  throw new Error(`Unsupported shape ${(elm as any).shape}`)\n}\n\nexport const getApertureConfigFromPcbSilkscreenPath = (\n  elm: PcbSilkscreenPath,\n): ApertureTemplateConfig => {\n  if (\"stroke_width\" in elm) {\n    return {\n      standard_template_code: \"C\",\n      diameter: elm.stroke_width,\n    }\n  }\n  throw new Error(`Provide stroke_width for: ${elm as any}`)\n}\n\nexport const getApertureConfigFromPcbSilkscreenText = (\n  elm: PcbSilkscreenText,\n): ApertureTemplateConfig => {\n  if (\"font_size\" in elm) {\n    return {\n      standard_template_code: \"C\",\n      diameter: elm.font_size / 8, // font size and diamater have different units of measurement\n    }\n  }\n  throw new Error(`Provide font_size for: ${elm as any}`)\n}\n\nexport const getApertureConfigFromPcbCopperText = (\n  elm: PcbCopperText,\n): ApertureTemplateConfig => {\n  if (\"font_size\" in elm) {\n    return {\n      standard_template_code: \"C\",\n      diameter: elm.font_size / 8, // font size and diamater have different units of measurement\n    }\n  }\n  throw new Error(`Provide font_size for: ${elm as any}`)\n}\n\nexport const getApertureConfigFromPcbSolderPaste = (\n  elm: PcbSolderPaste,\n): ApertureTemplateConfig => {\n  if (elm.shape === \"rect\") {\n    return {\n      standard_template_code: \"R\",\n      x_size: elm.width,\n      y_size: elm.height,\n    }\n  }\n  if (elm.shape === \"rotated_rect\") {\n    // Rotation is handled by the LR command, not the aperture definition\n    return {\n      standard_template_code: \"R\",\n      x_size: elm.width,\n      y_size: elm.height,\n    }\n  }\n  if (elm.shape === \"circle\") {\n    return {\n      standard_template_code: \"C\",\n      diameter: elm.radius * 2,\n    }\n  }\n  if (elm.shape === \"pill\") {\n    if (!(\"width\" in elm && \"height\" in elm)) {\n      throw new Error(\n        \"Invalid pill shape in getApertureConfigFromPcbPlatedHole: missing dimensions\",\n      )\n    }\n    if (elm.width >= elm.height) {\n      return {\n        macro_name: \"HORZPILL\",\n        x_size: elm.width,\n        y_size: elm.height,\n        circle_diameter: Math.min(elm.width, elm.height),\n        circle_center_offset: elm.width / 2,\n      }\n    }\n    return {\n      macro_name: \"VERTPILL\",\n      x_size: elm.width,\n      y_size: elm.height,\n      circle_diameter: Math.min(elm.width, elm.height),\n      circle_center_offset: elm.height / 2,\n    }\n  }\n  throw new Error(`Unsupported shape ${(elm as any).shape}`)\n}\n\nexport const getApertureConfigFromPcbPlatedHole = (\n  elm: PCBPlatedHole,\n): ApertureTemplateConfig => {\n  if (elm.shape === \"circle\") {\n    if (!(\"outer_diameter\" in elm && \"hole_diameter\" in elm)) {\n      throw new Error(\n        \"Invalid circle shape in getApertureConfigFromPcbPlatedHole: missing diameters\",\n      )\n    }\n    return {\n      standard_template_code: \"C\",\n      diameter: elm.outer_diameter,\n    }\n  }\n  if (elm.shape === \"pill\") {\n    if (!(\"outer_width\" in elm && \"outer_height\" in elm)) {\n      throw new Error(\n        \"Invalid pill shape in getApertureConfigFromPcbPlatedHole: missing dimensions\",\n      )\n    }\n\n    if (elm.outer_width > elm.outer_height) {\n      return {\n        macro_name: \"HORZPILL\",\n        x_size: elm.outer_width,\n        y_size: elm.outer_height,\n        circle_diameter: Math.min(elm.outer_width, elm.outer_height),\n        circle_center_offset: elm.outer_width / 2,\n      }\n    }\n    return {\n      macro_name: \"VERTPILL\",\n      x_size: elm.outer_width,\n      y_size: elm.outer_height,\n      circle_diameter: Math.min(elm.outer_width, elm.outer_height),\n      circle_center_offset: elm.outer_height / 2,\n    }\n  }\n  const shape = elm.shape\n  if (\n    shape === \"circular_hole_with_rect_pad\" ||\n    shape === \"pill_hole_with_rect_pad\" ||\n    shape === \"rotated_pill_hole_with_rect_pad\"\n  ) {\n    if (!(\"rect_pad_width\" in elm && \"rect_pad_height\" in elm)) {\n      throw new Error(\n        `Invalid ${shape} shape in getApertureConfigFromPcbPlatedHole: missing dimensions`,\n      )\n    }\n    return {\n      standard_template_code: \"R\",\n      x_size: elm.rect_pad_width,\n      y_size: elm.rect_pad_height,\n    }\n  }\n  throw new Error(\n    `Unsupported shape in getApertureConfigFromPcbPlatedHole: ${elm.shape}`,\n  )\n}\n\nexport const getApertureConfigFromCirclePcbHole = (\n  elm: PcbHole,\n): ApertureTemplateConfig => {\n  if (!(\"hole_diameter\" in elm)) {\n    throw new Error(\n      `Invalid shape called in getApertureConfigFromCirclePcbHole: ${elm.hole_shape}`,\n    )\n  }\n  return {\n    standard_template_code: \"C\",\n    diameter: elm.hole_diameter,\n  }\n}\n\nexport const getApertureConfigFromOuterDiameter = (elm: {\n  outer_diameter?: number\n}): ApertureTemplateConfig => {\n  if (typeof elm.outer_diameter !== \"number\") {\n    throw new Error(\n      \"outer_diameter not specified in getApertureConfigFromOuterDiameter\",\n    )\n  }\n  return {\n    standard_template_code: \"C\",\n    diameter: elm.outer_diameter,\n  }\n}\n\nfunction getAllApertureTemplateConfigsForLayer({\n  circuitJson,\n  layer,\n  glayer_name,\n}: {\n  circuitJson: AnyCircuitElement[]\n  layer: LayerRef\n  glayer_name: GerberLayerName\n}): ApertureTemplateConfig[] {\n  const configs: ApertureTemplateConfig[] = []\n  const configHashMap = new Set<string>()\n  const isSoldermaskLayer = glayer_name.endsWith(\"_Mask\")\n\n  const addConfigIfNew = (config: ApertureTemplateConfig) => {\n    const hash = stableStringify(config)\n    if (!configHashMap.has(hash)) {\n      configs.push(config)\n      configHashMap.add(hash)\n    }\n  }\n\n  for (const elm of circuitJson) {\n    if (elm.type === \"pcb_smtpad\") {\n      if (elm.layer === layer && elm.shape !== \"polygon\") {\n        if (isSoldermaskLayer) {\n          addConfigIfNew(getApertureConfigFromPcbSmtpadSoldermask(elm))\n        } else {\n          addConfigIfNew(getApertureConfigFromPcbSmtpad(elm))\n        }\n      }\n    } else if (elm.type === \"pcb_solder_paste\") {\n      if (elm.layer === layer) {\n        addConfigIfNew(getApertureConfigFromPcbSolderPaste(elm))\n        if (elm.shape === \"pill\") {\n          addConfigIfNew(\n            getApertureConfigFromPcbSolderPaste({\n              ...elm,\n              width: elm.height,\n              height: elm.width,\n            }),\n          )\n        }\n      }\n    } else if (elm.type === \"pcb_plated_hole\") {\n      if (elm.layers.includes(layer)) {\n        if (\n          glayer_name.endsWith(\"_Mask\") &&\n          elm.is_covered_with_solder_mask === true\n        ) {\n          continue\n        }\n        addConfigIfNew(getApertureConfigFromPcbPlatedHole(elm))\n      }\n    } else if (elm.type === \"pcb_hole\") {\n      if (\n        glayer_name.endsWith(\"_Mask\") &&\n        elm.is_covered_with_solder_mask === true\n      ) {\n        continue\n      }\n      if (elm.hole_shape === \"circle\")\n        addConfigIfNew(getApertureConfigFromCirclePcbHole(elm))\n      else console.warn(\"NOT IMPLEMENTED: drawing gerber for non circle holes\")\n    } else if (elm.type === \"pcb_via\") {\n      addConfigIfNew(getApertureConfigFromOuterDiameter(elm))\n    } else if (elm.type === \"pcb_trace\") {\n      for (const point of elm.route) {\n        if (\n          point.route_type === \"via\" &&\n          typeof point.outer_diameter === \"number\" &&\n          (point.from_layer === layer || point.to_layer === layer)\n        ) {\n          addConfigIfNew(getApertureConfigFromOuterDiameter(point))\n        }\n      }\n    } else if (elm.type === \"pcb_silkscreen_path\")\n      addConfigIfNew(getApertureConfigFromPcbSilkscreenPath(elm))\n    else if (elm.type === \"pcb_silkscreen_text\")\n      addConfigIfNew(getApertureConfigFromPcbSilkscreenText(elm))\n    else if (elm.type === \"pcb_copper_text\") {\n      if (elm.layer === layer)\n        addConfigIfNew(getApertureConfigFromPcbCopperText(elm))\n    }\n  }\n\n  return configs\n}\n","import type { AnyCircuitElement, LayerRef, PCBTrace } from \"circuit-json\"\n\nexport function getAllTraceWidths(\n  soup: AnyCircuitElement[],\n): Record<LayerRef, number[]> {\n  const pcb_traces = soup.filter(\n    (elm): elm is PCBTrace => elm.type === \"pcb_trace\",\n  )\n\n  const widths: Record<LayerRef, Set<number>> = {} as any\n\n  for (const trace of pcb_traces) {\n    for (const segment of trace.route) {\n      if (segment.route_type === \"wire\") {\n        widths[segment.layer] = widths[segment.layer] || new Set<number>()\n        widths[segment.layer].add(segment.width)\n      }\n    }\n  }\n\n  return {\n    top: Array.from(widths.top || []),\n    inner1: Array.from(widths.inner1 || []),\n    inner2: Array.from(widths.inner2 || []),\n    inner3: Array.from(widths.inner3 || []),\n    inner4: Array.from(widths.inner4 || []),\n    inner5: Array.from(widths.inner5 || []),\n    inner6: Array.from(widths.inner6 || []),\n    bottom: Array.from(widths.bottom || []),\n  } as any\n}\n","import type {\n  ApertureTemplateConfig,\n  DefineAperatureTemplateCommand,\n} from \"../commands/define_aperture_template\"\nimport type { AnyGerberCommand } from \"../any_gerber_command\"\n\nexport const findApertureNumber = (\n  glayer: AnyGerberCommand[],\n  search_params:\n    | {\n        trace_width?: number\n      }\n    | ApertureTemplateConfig,\n): number => {\n  let aperture: any\n  if (\"trace_width\" in search_params) {\n    const trace_width = search_params.trace_width\n    aperture = glayer.find(\n      (command): command is DefineAperatureTemplateCommand =>\n        \"standard_template_code\" in command &&\n        command.command_code === \"ADD\" &&\n        command.standard_template_code === \"C\" &&\n        command.diameter === trace_width,\n    )\n  } else if (\n    \"standard_template_code\" in search_params ||\n    \"macro_name\" in search_params\n  ) {\n    aperture = glayer.find(\n      (command): command is DefineAperatureTemplateCommand =>\n        command.command_code === \"ADD\" &&\n        Object.keys(search_params).every(\n          (param_name) =>\n            command[param_name as keyof typeof search_params] ===\n            search_params[param_name as keyof typeof search_params],\n        ),\n    )\n  }\n\n  if (!aperture) {\n    // TODO add FileFunction/layer name to this error to help narrow it\n    throw new Error(\n      `Aperture not found for search params ${JSON.stringify(search_params)}`,\n    )\n  }\n  return aperture.aperture_number\n}\n","{\n  \"name\": \"circuit-json-to-gerber\",\n  \"version\": \"0.0.61\",\n  \"main\": \"dist/index.js\",\n  \"type\": \"module\",\n  \"scripts\": {\n    \"build\": \"tsup-node src/index.ts src/cli.ts --format esm --dts --sourcemap\",\n    \"format\": \"biome format --write .\",\n    \"format:check\": \"biome format .\",\n    \"start\": \"bun --bun site/index.html\",\n    \"build:site\": \"bun build site/index.html --outdir ./site-export\"\n  },\n  \"files\": [\n    \"dist\"\n  ],\n  \"bin\": {\n    \"circuit-to-gerber\": \"./dist/cli.js\"\n  },\n  \"devDependencies\": {\n    \"@biomejs/biome\": \"^1.8.3\",\n    \"@types/archiver\": \"^6.0.3\",\n    \"@types/bun\": \"^1.1.8\",\n    \"@types/node\": \"^22.5.2\",\n    \"@types/react\": \"^19.2.7\",\n    \"@types/react-dom\": \"^19.1.5\",\n    \"archiver\": \"^7.0.1\",\n    \"bun-match-svg\": \"^0.0.13\",\n    \"circuit-json\": \"^0.0.421\",\n    \"commander\": \"^12.1.0\",\n    \"gerber-to-svg\": \"^4.2.8\",\n    \"gerberts\": \"^0.0.3\",\n    \"jszip\": \"^3.10.1\",\n    \"pcb-stackup\": \"^4.2.8\",\n    \"react\": \"^19.2.1\",\n    \"react-dom\": \"^19.2.1\",\n    \"tscircuit\": \"^0.0.1705\",\n    \"tsup\": \"^8.2.4\"\n  },\n  \"peerDependencies\": {\n    \"typescript\": \"^5.0.0\",\n    \"tscircuit\": \"*\",\n    \"circuit-json\": \"*\"\n  },\n  \"dependencies\": {\n    \"@tscircuit/alphabet\": \"^0.0.25\",\n    \"fast-json-stable-stringify\": \"^2.1.0\",\n    \"transformation-matrix\": \"^3.0.0\"\n  }\n}\n","import type { LayerRef } from \"circuit-json\"\nimport type { AnyGerberCommand } from \"src/gerber/any_gerber_command\"\nimport { gerberBuilder } from \"../gerber-builder\"\nimport packageJson from \"../../../package.json\"\n\nconst layerAndTypeToFileFunction = {\n  \"top-copper\": \"Copper,L1,Top\",\n  \"top-soldermask\": \"Soldermask,Top\",\n  \"bottom-soldermask\": \"Soldermask,Bot\",\n  \"top-silkscreen\": \"Legend,Top\",\n  \"bottom-silkscreen\": \"Legend,Bot\",\n  \"top-paste\": \"Paste,Top\",\n  \"bottom-paste\": \"Paste,Bot\",\n  edgecut: \"Profile,NP\",\n}\n\nconst getCopperLayerNumber = (layer: LayerRef, total_layer_count: number) => {\n  if (layer === \"top\") return 1\n  if (layer === \"bottom\") return total_layer_count\n  return Number(layer.replace(\"inner\", \"\")) + 1\n}\n\n/**\n * Returns headers for a Gerber file. Here's a typical header:\n *\n * %TF.GenerationSoftware,KiCad,Pcbnew,8.0.1*%\n * %TF.CreationDate,2024-04-08T11:14:22-07:00*%\n * %TF.ProjectId,,58585858-5858-4585-9858-585858585858,rev?*%\n * %TF.SameCoordinates,Original*%\n * %TF.FileFunction,Copper,L1,Top*%\n * %TF.FilePolarity,Positive*%\n * %FSLAX46Y46*%\n * G04 Gerber Fmt 4.6, Leading zero omitted, Abs format (unit mm)*\n * G04 Created by KiCad (PCBNEW 8.0.1) date 2024-04-08 11:14:22*\n * %MOMM*%\n * %LPD*%\n */\nexport const getCommandHeaders = (opts: {\n  layer: \"edgecut\" | LayerRef\n  layer_type?: \"copper\" | \"soldermask\" | \"silkscreen\" | \"paste\"\n  total_layer_count?: number\n}): AnyGerberCommand[] => {\n  const total_layer_count = opts.total_layer_count ?? 2\n  let file_function: string | undefined\n  if (opts.layer_type === \"copper\" && opts.layer !== \"edgecut\") {\n    const layerNumber = getCopperLayerNumber(opts.layer, total_layer_count)\n    const layerPosition =\n      opts.layer === \"top\" ? \"Top\" : opts.layer === \"bottom\" ? \"Bot\" : \"Inr\"\n    file_function = `Copper,L${layerNumber},${layerPosition}`\n  } else {\n    file_function =\n      layerAndTypeToFileFunction[\n        (opts.layer_type\n          ? `${opts.layer}-${opts.layer_type}`\n          : opts.layer) as keyof typeof layerAndTypeToFileFunction\n      ]\n  }\n  return (\n    gerberBuilder()\n      .add(\"add_attribute_on_file\", {\n        attribute_name: \"GenerationSoftware\",\n        attribute_value: `tscircuit,circuit-json-to-gerber,${packageJson.version}`,\n      })\n      .add(\"add_attribute_on_file\", {\n        attribute_name: \"CreationDate\",\n        attribute_value: new Date().toISOString(),\n      })\n      // .add(\"add_attribute_on_file\", {\n      //   attribute_name: \"ProjectId\",\n      //   attribute_value: \"\",\n      // })\n      .add(\"add_attribute_on_file\", {\n        attribute_name: \"SameCoordinates\",\n        attribute_value: \"Original\",\n      })\n      .add(\"add_attribute_on_file\", {\n        attribute_name: \"FileFunction\",\n        attribute_value: file_function,\n      })\n      .$if(opts.layer !== \"edgecut\", (gb) =>\n        gb.add(\"add_attribute_on_file\", {\n          attribute_name: \"FilePolarity\",\n          attribute_value:\n            opts.layer_type === \"soldermask\" ? \"Negative\" : \"Positive\",\n        }),\n      )\n      .add(\"format_specification\", {})\n      .add(\"set_unit\", {\n        unit: \"MM\",\n      })\n      .add(\"comment\", {\n        comment: \"Gerber Fmt 4.6, Leading zero omitted, Abs format (unit mm)\",\n      })\n      .add(\"comment\", {\n        comment: `Created by tscircuit (builder) date ${new Date().toISOString()}`,\n      })\n      .add(\"set_movement_mode_to_linear\", {})\n      .add(\"set_layer_polarity\", {\n        polarity: \"D\",\n      })\n      .add(\"create_arc\", {})\n      .build()\n  )\n}\n","import type { LayerRef } from \"circuit-json\"\nimport type { GerberLayerName } from \"./GerberLayerName\"\n\nconst layerRefToGerberPrefix = {\n  top: \"F_\",\n  bottom: \"B_\",\n  inner1: \"In1_\",\n  inner2: \"In2_\",\n  inner3: \"In3_\",\n  inner4: \"In4_\",\n  inner5: \"In5_\",\n  inner6: \"In6_\",\n} as const\nconst layerTypeToGerberSuffix = {\n  copper: \"Cu\",\n  silkscreen: \"SilkScreen\",\n  soldermask: \"Mask\",\n  mask: \"Mask\",\n  paste: \"Paste\",\n} as const\n\nexport const getGerberLayerName = (\n  layer_ref: LayerRef | \"edgecut\",\n  layer_type: \"copper\" | \"silkscreen\" | \"soldermask\" | \"paste\",\n): GerberLayerName => {\n  if (layer_ref === \"edgecut\") return \"Edge_Cuts\"\n  if (layer_ref.startsWith(\"inner\") && layer_type !== \"copper\") {\n    throw new Error(`Inner layer ${layer_ref} only supports copper gerbers`)\n  }\n  return `${layerRefToGerberPrefix[layer_ref as keyof typeof layerRefToGerberPrefix]}${layerTypeToGerberSuffix[layer_type]}` as GerberLayerName\n}\n","import type { AnyCircuitElement, PcbPlatedHole } from \"circuit-json\"\nimport { pairs } from \"../utils/pairs\"\nimport { gerberBuilder } from \"../gerber-builder\"\nimport type { LayerToGerberCommandsMap } from \"./GerberLayerName\"\nimport { defineCommonMacros } from \"./define-common-macros\"\nimport {\n  defineAperturesForLayer,\n  getApertureConfigFromCirclePcbHole,\n  getApertureConfigFromPcbPlatedHole,\n  getApertureConfigFromPcbCopperText,\n  getApertureConfigFromPcbSilkscreenPath,\n  getApertureConfigFromPcbSilkscreenText,\n  getApertureConfigFromPcbSmtpad,\n  getApertureConfigFromPcbSmtpadSoldermask,\n  getApertureConfigFromPcbSolderPaste,\n  getApertureConfigFromOuterDiameter,\n} from \"./defineAperturesForLayer\"\nimport type { PcbCutout } from \"circuit-json\"\nimport { findApertureNumber } from \"./findApertureNumber\"\nimport { getCommandHeaders } from \"./getCommandHeaders\"\nimport { getGerberLayerName } from \"./getGerberLayerName\"\nimport { lineAlphabet } from \"@tscircuit/alphabet\"\nimport {\n  applyToPoint,\n  compose,\n  identity,\n  rotate,\n  translate,\n  type Matrix,\n} from \"transformation-matrix\"\nimport type { AnyGerberCommand } from \"../any_gerber_command\"\nimport type { LayerRef } from \"circuit-json\"\n\nconst getLayerCount = (circuitJson: AnyCircuitElement[]) => {\n  const board = circuitJson.find((element) => element.type === \"pcb_board\") as\n    | { num_layers?: number }\n    | undefined\n  const numLayers = board?.num_layers ?? 2\n  return Math.max(2, Math.min(8, numLayers))\n}\n\nconst getInnerLayerRefs = (layerCount: number): LayerRef[] =>\n  Array.from({ length: layerCount - 2 }, (_, i) => `inner${i + 1}` as LayerRef)\n\nconst getGerberInnerLayerName = (layerRef: LayerRef) => {\n  if (!layerRef.startsWith(\"inner\")) {\n    throw new Error(`Expected inner layer, got ${layerRef}`)\n  }\n  return `In${layerRef.replace(\"inner\", \"\")}_Cu` as const\n}\n\n/**\n * Converts Circuit JSON to arrays of Gerber commands for each layer\n */\nexport const convertSoupToGerberCommands = (\n  circuitJson: AnyCircuitElement[],\n  opts: { flip_y_axis?: boolean } = {},\n): LayerToGerberCommandsMap => {\n  opts.flip_y_axis ??= false\n  const hasPanel = circuitJson.some((e) => e.type === \"pcb_panel\")\n  const layerCount = getLayerCount(circuitJson)\n  const innerLayerRefs = getInnerLayerRefs(layerCount)\n  const copperLayerRefs = [\"top\", ...innerLayerRefs, \"bottom\"] as LayerRef[]\n  const outerLayerRefs = [\"top\", \"bottom\"] as const\n  const glayers: LayerToGerberCommandsMap = {\n    F_Cu: getCommandHeaders({\n      layer: \"top\",\n      layer_type: \"copper\",\n      total_layer_count: layerCount,\n    }),\n    F_SilkScreen: getCommandHeaders({\n      layer: \"top\",\n      layer_type: \"silkscreen\",\n    }),\n    F_Mask: getCommandHeaders({\n      layer: \"top\",\n      layer_type: \"soldermask\",\n    }),\n    F_Paste: getCommandHeaders({\n      layer: \"top\",\n      layer_type: \"paste\",\n    }),\n    B_Cu: getCommandHeaders({\n      layer: \"bottom\",\n      layer_type: \"copper\",\n      total_layer_count: layerCount,\n    }),\n    B_SilkScreen: getCommandHeaders({\n      layer: \"bottom\",\n      layer_type: \"silkscreen\",\n    }),\n    B_Mask: getCommandHeaders({\n      layer: \"bottom\",\n      layer_type: \"soldermask\",\n    }),\n    B_Paste: getCommandHeaders({\n      layer: \"bottom\",\n      layer_type: \"paste\",\n    }),\n    Edge_Cuts: getCommandHeaders({\n      layer: \"edgecut\",\n    }),\n  }\n\n  for (const innerLayerRef of innerLayerRefs) {\n    glayers[getGerberInnerLayerName(innerLayerRef)] = getCommandHeaders({\n      layer: innerLayerRef,\n      layer_type: \"copper\",\n      total_layer_count: layerCount,\n    })\n  }\n\n  const copperGerberLayerNames = copperLayerRefs.map((layerRef) =>\n    getGerberLayerName(layerRef, \"copper\"),\n  )\n  const outerGerberLayerNames = outerLayerRefs.flatMap((layerRef) => [\n    getGerberLayerName(layerRef, \"soldermask\"),\n    getGerberLayerName(layerRef, \"paste\"),\n    getGerberLayerName(layerRef, \"silkscreen\"),\n  ])\n\n  for (const glayer_name of [\n    \"F_Cu\",\n    ...copperGerberLayerNames.filter((name) => name !== \"F_Cu\"),\n    ...outerGerberLayerNames,\n  ] as const) {\n    const glayer = glayers[glayer_name]\n    defineCommonMacros(glayer)\n    defineAperturesForLayer({\n      circuitJson,\n      glayer,\n      glayer_name,\n    })\n  }\n\n  // Edgecuts has a single aperature\n  glayers.Edge_Cuts.push(\n    ...gerberBuilder()\n      .add(\"define_aperture_template\", {\n        aperture_number: 10,\n        standard_template_code: \"C\",\n        diameter: 0.05, //mm\n      })\n      .build(),\n  )\n\n  /**\n   * \"maybe flip y axis\" to handle y axis negating\n   */\n  const mfy = (y: number) => (opts.flip_y_axis ? -y : y)\n\n  const renderVectorText = (\n    element: any,\n    layer: LayerRef,\n    layerType: \"copper\" | \"silkscreen\",\n    getApertureConfig: (elm: any) => any,\n  ) => {\n    if (element.layer !== layer) return\n    // The acctual Uppercase letters are 70% of the font size\n    // sources: https://forum.generic-mapping-tools.org/t/what-exactly-is-the-custom-font-s-height-point-size-ratio/1265/2\n    const CAP_HEIGHT_SCALE = 0.7 // Adjust based on your font's metrics\n    const glayer = glayers[getGerberLayerName(layer, layerType)]\n    const apertureConfig = getApertureConfig(element)\n    const gerber = gerberBuilder().add(\"select_aperture\", {\n      aperture_number: findApertureNumber(glayer, apertureConfig),\n    })\n\n    let initialX = element.anchor_position.x\n    let initialY = element.anchor_position.y\n    const fontSize = element.font_size * CAP_HEIGHT_SCALE\n    const letterSpacing = fontSize * 0.4\n    const spaceWidth = fontSize * 0.5\n\n    const textWidth =\n      element.text.split(\"\").reduce((width: number, char: string) => {\n        if (char === \" \") {\n          return width + spaceWidth + letterSpacing\n        }\n        return width + fontSize + letterSpacing\n      }, 0) - letterSpacing\n\n    const textHeight = fontSize\n\n    const anchorAlignment =\n      element.anchor_alignment ||\n      (():\n        | \"top_center\"\n        | \"bottom_center\"\n        | \"center_left\"\n        | \"center_right\"\n        | undefined => {\n        const side = element.anchor_side as\n          | \"top\"\n          | \"bottom\"\n          | \"left\"\n          | \"right\"\n          | undefined\n        if (!side) return undefined\n        switch (side) {\n          case \"top\":\n            return \"top_center\"\n          case \"bottom\":\n            return \"bottom_center\"\n          case \"left\":\n            return \"center_left\"\n          case \"right\":\n            return \"center_right\"\n        }\n      })() ||\n      \"center\"\n\n    switch (anchorAlignment) {\n      case \"top_left\":\n        break\n      case \"top_center\":\n        initialX -= textWidth / 2\n        break\n      case \"top_right\":\n        initialX -= textWidth\n        break\n      case \"center_right\":\n        initialY -= textHeight / 2\n        break\n      case \"center_left\":\n        initialX -= textWidth\n        initialY -= textHeight / 2\n        break\n      case \"bottom_left\":\n        initialY -= textHeight\n        break\n      case \"bottom_center\":\n        initialX -= textWidth / 2\n        initialY -= textHeight\n        break\n      case \"bottom_right\":\n        initialX -= textWidth\n        initialY -= textHeight\n        break\n      default:\n        initialX -= textWidth / 2\n        initialY -= textHeight / 2\n        break\n    }\n\n    let anchoredX = initialX\n    const anchoredY = initialY\n\n    let rotation = element.ccw_rotation || 0\n    const cx = anchoredX + textWidth / 2\n    const cy = anchoredY + textHeight / 2\n    const transforms: Matrix[] = []\n\n    const shouldMirror =\n      element.is_mirrored !== undefined\n        ? element.is_mirrored\n        : element.layer === \"bottom\"\n\n    if (shouldMirror) {\n      transforms.push(\n        translate(cx, cy),\n        { a: -1, b: 0, c: 0, d: 1, e: 0, f: 0 },\n        translate(-cx, -cy),\n      )\n      rotation = -rotation\n    }\n\n    if (rotation) {\n      const rad = (rotation * Math.PI) / 180\n      transforms.push(translate(cx, cy), rotate(rad), translate(-cx, -cy))\n    }\n\n    const transformMatrix =\n      transforms.length > 0 ? compose(...transforms) : undefined\n\n    const applyTransform = (point: { x: number; y: number }) =>\n      transformMatrix ? applyToPoint(transformMatrix, point) : point\n\n    if (layerType === \"copper\" && element.is_knockout) {\n      const padding = element.knockout_padding ?? {\n        left: 0.2,\n        right: 0.2,\n        top: 0.2,\n        bottom: 0.2,\n      }\n\n      const paddedRect = [\n        { x: initialX - padding.left, y: initialY - padding.top },\n        {\n          x: initialX + textWidth + padding.right,\n          y: initialY - padding.top,\n        },\n        {\n          x: initialX + textWidth + padding.right,\n          y: initialY + textHeight + padding.bottom,\n        },\n        {\n          x: initialX - padding.left,\n          y: initialY + textHeight + padding.bottom,\n        },\n      ].map(applyTransform)\n\n      glayer.push(\n        ...gerberBuilder()\n          .add(\"select_aperture\", {\n            aperture_number: findApertureNumber(glayer, apertureConfig),\n          })\n          .add(\"start_region_statement\", {})\n          .add(\"move_operation\", {\n            x: paddedRect[0].x,\n            y: mfy(paddedRect[0].y),\n          })\n          .add(\"plot_operation\", {\n            x: paddedRect[1].x,\n            y: mfy(paddedRect[1].y),\n          })\n          .add(\"plot_operation\", {\n            x: paddedRect[2].x,\n            y: mfy(paddedRect[2].y),\n          })\n          .add(\"plot_operation\", {\n            x: paddedRect[3].x,\n            y: mfy(paddedRect[3].y),\n          })\n          .add(\"plot_operation\", {\n            x: paddedRect[0].x,\n            y: mfy(paddedRect[0].y),\n          })\n          .add(\"end_region_statement\", {})\n          .build(),\n      )\n\n      glayer.push(\n        ...gerberBuilder().add(\"set_layer_polarity\", { polarity: \"C\" }).build(),\n      )\n    }\n\n    for (const char of element.text.toUpperCase()) {\n      if (char === \" \") {\n        anchoredX += spaceWidth + letterSpacing\n        continue\n      }\n\n      const letterPaths = lineAlphabet[char] || []\n      for (const path of letterPaths) {\n        const x1 = anchoredX + path.x1 * fontSize\n        const y1 = anchoredY + path.y1 * fontSize\n        const x2 = anchoredX + path.x2 * fontSize\n        const y2 = anchoredY + path.y2 * fontSize\n\n        const p1 = applyTransform({ x: x1, y: y1 })\n        const p2 = applyTransform({ x: x2, y: y2 })\n\n        gerber.add(\"move_operation\", { x: p1.x, y: mfy(p1.y) })\n        gerber.add(\"plot_operation\", { x: p2.x, y: mfy(p2.y) })\n      }\n\n      anchoredX += fontSize + letterSpacing\n    }\n\n    glayer.push(...gerber.build())\n\n    if (layerType === \"copper\" && element.is_knockout) {\n      glayer.push(\n        ...gerberBuilder().add(\"set_layer_polarity\", { polarity: \"D\" }).build(),\n      )\n    }\n  }\n\n  // Helper to draw a ring into a gerber builder (used for copper pours)\n  const drawRingToBuilder = (\n    builder: ReturnType<typeof gerberBuilder>,\n    ring: {\n      vertices: Array<{ x: number; y: number; bulge?: number }>\n    },\n  ) => {\n    if (!ring || ring.vertices.length === 0) return\n\n    builder.add(\"move_operation\", {\n      x: ring.vertices[0].x,\n      y: mfy(ring.vertices[0].y),\n    })\n\n    const vertices_loop = [...ring.vertices, ring.vertices[0]]\n\n    for (let i = 0; i < vertices_loop.length - 1; i++) {\n      const start = vertices_loop[i]\n      const end = vertices_loop[i + 1]\n\n      if (start.bulge && Math.abs(start.bulge) > 1e-9) {\n        const bulge = (opts.flip_y_axis ? -1 : 1) * (start.bulge as number)\n        if (bulge > 0) {\n          // CCW\n          builder.add(\"set_movement_mode_to_counterclockwise_circular\", {})\n        } else {\n          // CW\n          builder.add(\"set_movement_mode_to_clockwise_circular\", {})\n        }\n\n        const p1 = { x: start.x, y: start.y }\n        const p2 = { x: end.x, y: end.y }\n\n        const dx = p2.x - p1.x\n        const dy = p2.y - p1.y\n        const d = Math.sqrt(dx * dx + dy * dy)\n\n        if (d < 1e-9) {\n          builder.add(\"set_movement_mode_to_linear\", {})\n          builder.add(\"plot_operation\", {\n            x: end.x,\n            y: mfy(end.y),\n          })\n          continue\n        }\n\n        const abs_b = Math.abs(bulge)\n        const theta = 4 * Math.atan(abs_b)\n        if (Math.abs(Math.sin(theta / 2)) < 1e-9) {\n          builder.add(\"set_movement_mode_to_linear\", {})\n          builder.add(\"plot_operation\", {\n            x: end.x,\n            y: mfy(end.y),\n          })\n          continue\n        }\n        const R = d / (2 * Math.sin(theta / 2))\n        const alpha = (Math.PI - theta) / 2\n        const phi = Math.atan2(dy, dx)\n        const delta_angle = bulge > 0 ? alpha : -alpha\n        const angle_p1_center = phi + delta_angle\n        const Cx = p1.x + R * Math.cos(angle_p1_center)\n        const Cy = p1.y + R * Math.sin(angle_p1_center)\n\n        const i_offset = Cx - p1.x\n        const j_offset = Cy - p1.y\n\n        builder.add(\"plot_operation\", {\n          x: end.x,\n          y: mfy(end.y),\n          i: i_offset,\n          j: opts.flip_y_axis ? -j_offset : j_offset,\n        })\n      } else {\n        // line\n        builder.add(\"set_movement_mode_to_linear\", {})\n        builder.add(\"plot_operation\", { x: end.x, y: mfy(end.y) })\n      }\n    }\n  }\n\n  // To conform to Gerber spec (CCW outer, CW inner) from tscircuit\n  // spec (CW outer, CCW inner), we must reverse both.\n  const reverseRing = (ring: {\n    vertices: Array<{ x: number; y: number; bulge?: number }>\n  }): {\n    vertices: Array<{ x: number; y: number; bulge?: number }>\n  } => {\n    const { vertices } = ring\n    if (!vertices || vertices.length === 0) return { vertices: [] }\n    const n = vertices.length\n\n    const reversed_pts = [...vertices].reverse()\n\n    const new_vertices = reversed_pts.map((pt, i) => {\n      const bulge_v_idx = (n - 2 - i + n) % n\n      const bulge = vertices[bulge_v_idx].bulge\n      return { ...pt, bulge: bulge ? -bulge : undefined }\n    })\n\n    return { vertices: new_vertices }\n  }\n\n  // FIRST PASS: Process copper pours first\n  // Copper pours must be rendered before traces/pads/vias so that:\n  // 1. Pour is drawn (LPD - dark)\n  // 2. Cutouts are drawn (LPC - clear)\n  // 3. Traces/pads/vias are drawn on top (LPD - dark)\n  for (const layer of copperLayerRefs) {\n    for (const element of circuitJson) {\n      if (element.type === \"pcb_copper_pour\" && layer === element.layer) {\n        const copper_glayer = glayers[getGerberLayerName(layer, \"copper\")]\n\n        // Collect all pour commands for this element\n        const all_pour_commands: AnyGerberCommand[] = []\n\n        if (element.shape === \"brep\") {\n          const { brep_shape } = element\n          if (!brep_shape) continue\n          const { outer_ring, inner_rings } = brep_shape\n\n          // Draw outer ring as a filled region (dark polarity - default)\n          const outer_builder = gerberBuilder()\n            .add(\"select_aperture\", { aperture_number: 10 })\n            .add(\"start_region_statement\", {})\n\n          drawRingToBuilder(outer_builder, reverseRing(outer_ring))\n\n          outer_builder.add(\"end_region_statement\", {})\n          all_pour_commands.push(...outer_builder.build())\n\n          // Draw inner rings (cutouts) using clear polarity\n          // Each inner ring is drawn as a separate region with LPC (clear)\n          if (inner_rings && inner_rings.length > 0) {\n            // Switch to clear polarity\n            all_pour_commands.push(\n              ...gerberBuilder()\n                .add(\"set_layer_polarity\", { polarity: \"C\" })\n                .build(),\n            )\n\n            for (const inner_ring of inner_rings) {\n              const inner_builder = gerberBuilder()\n                .add(\"select_aperture\", { aperture_number: 10 })\n                .add(\"start_region_statement\", {})\n\n              // For clear polarity, we don't need to reverse - draw as-is\n              // The polarity handles the \"hole\" semantics\n              drawRingToBuilder(inner_builder, inner_ring)\n\n              inner_builder.add(\"end_region_statement\", {})\n              all_pour_commands.push(...inner_builder.build())\n            }\n\n            // Switch back to dark polarity\n            all_pour_commands.push(\n              ...gerberBuilder()\n                .add(\"set_layer_polarity\", { polarity: \"D\" })\n                .build(),\n            )\n          }\n        } else if (element.shape === \"rect\") {\n          const { center, width, height, rotation } = element\n          const w = (width as number) / 2\n          const h = (height as number) / 2\n\n          const points = [\n            { x: -w, y: h }, // Top-left\n            { x: w, y: h }, // Top-right\n            { x: w, y: -h }, // Bottom-right\n            { x: -w, y: -h }, // Bottom-left\n          ]\n\n          let transformMatrix = identity()\n          if (rotation) {\n            const angle_rad = ((rotation as number) * Math.PI) / 180\n            transformMatrix = rotate(angle_rad)\n          }\n          transformMatrix = compose(\n            translate(center.x, center.y),\n            transformMatrix,\n          )\n\n          const transformedPoints = points.map((p) =>\n            applyToPoint(transformMatrix, p),\n          )\n\n          const rect_builder = gerberBuilder()\n            .add(\"select_aperture\", { aperture_number: 10 })\n            .add(\"start_region_statement\", {})\n\n          rect_builder.add(\"move_operation\", {\n            x: transformedPoints[0].x,\n            y: mfy(transformedPoints[0].y),\n          })\n          for (let i = 1; i < transformedPoints.length; i++) {\n            rect_builder.add(\"plot_operation\", {\n              x: transformedPoints[i].x,\n              y: mfy(transformedPoints[i].y),\n            })\n          }\n          rect_builder.add(\"plot_operation\", {\n            x: transformedPoints[0].x,\n            y: mfy(transformedPoints[0].y),\n          })\n\n          rect_builder.add(\"end_region_statement\", {})\n          all_pour_commands.push(...rect_builder.build())\n        } else if (element.shape === \"polygon\") {\n          const { points } = element\n          if (points.length > 0) {\n            const poly_builder = gerberBuilder()\n              .add(\"select_aperture\", { aperture_number: 10 })\n              .add(\"start_region_statement\", {})\n\n            poly_builder.add(\"move_operation\", {\n              x: points[0].x,\n              y: mfy(points[0].y),\n            })\n            for (let i = 1; i < points.length; i++) {\n              poly_builder.add(\"plot_operation\", {\n                x: points[i].x,\n                y: mfy(points[i].y),\n              })\n            }\n            poly_builder.add(\"plot_operation\", {\n              x: points[0].x,\n              y: mfy(points[0].y),\n            })\n\n            poly_builder.add(\"end_region_statement\", {})\n            all_pour_commands.push(...poly_builder.build())\n          }\n        }\n\n        copper_glayer.push(...all_pour_commands)\n\n        if (element.covered_with_solder_mask === false) {\n          const mask_layer = glayers[getGerberLayerName(layer, \"soldermask\")]\n          mask_layer.push(...all_pour_commands)\n        }\n      }\n    }\n  }\n\n  // SECOND PASS: Process all other elements (traces, pads, vias, etc.)\n  for (const layer of [...copperLayerRefs, \"edgecut\"] as const) {\n    for (const element of circuitJson) {\n      if (element.type === \"pcb_trace\") {\n        const { route } = element\n        for (const [a, b] of pairs(route)) {\n          // TODO b kind of matters here, this doesn't handle a bunch of cases\n          // but the definition of a route is also kind of broken, a \"wire\" is\n          // a relationship between two points and can't really be a type of\n          // point\n          if (a.route_type === \"wire\") {\n            if (a.layer === layer) {\n              const glayer = glayers[getGerberLayerName(layer, \"copper\")]\n              glayer.push(\n                ...gerberBuilder()\n                  .add(\"select_aperture\", {\n                    aperture_number: findApertureNumber(glayer, {\n                      trace_width: a.width,\n                    }),\n                  })\n                  .add(\"move_operation\", { x: a.x, y: mfy(a.y) })\n                  .add(\"plot_operation\", { x: b.x, y: mfy(b.y) })\n                  .build(),\n              )\n            }\n          } else if (a.route_type === \"via\" && b.route_type === \"wire\") {\n            if (b.layer === layer) {\n              const glayer = glayers[getGerberLayerName(layer, \"copper\")]\n              glayer.push(\n                ...gerberBuilder()\n                  .add(\"select_aperture\", {\n                    aperture_number: findApertureNumber(glayer, {\n                      trace_width: b.width,\n                    }),\n                  })\n                  .add(\"move_operation\", { x: a.x, y: mfy(a.y) })\n                  .add(\"plot_operation\", { x: b.x, y: mfy(b.y) })\n                  .build(),\n              )\n            }\n          }\n        }\n        for (const point of route) {\n          if (\n            point.route_type === \"via\" &&\n            typeof point.outer_diameter === \"number\" &&\n            (point.from_layer === layer || point.to_layer === layer)\n          ) {\n            const glayer = glayers[getGerberLayerName(layer, \"copper\")]\n            glayer.push(\n              ...gerberBuilder()\n                .add(\"select_aperture\", {\n                  aperture_number: findApertureNumber(\n                    glayer,\n                    getApertureConfigFromOuterDiameter(point),\n                  ),\n                })\n                .add(\"flash_operation\", { x: point.x, y: mfy(point.y) })\n                .build(),\n            )\n          }\n        }\n      } else if (\n        element.type === \"pcb_silkscreen_path\" &&\n        outerLayerRefs.includes(layer as any)\n      ) {\n        if (element.layer === layer) {\n          const glayer = glayers[getGerberLayerName(layer, \"silkscreen\")]\n          const apertureConfig = getApertureConfigFromPcbSilkscreenPath(element)\n          const gerber = gerberBuilder().add(\"select_aperture\", {\n            aperture_number: findApertureNumber(glayer, apertureConfig),\n          })\n          // Move to the first point\n          if (element.route.length > 0) {\n            gerber.add(\"move_operation\", {\n              x: element.route[0].x,\n              y: mfy(element.route[0].y),\n            })\n          }\n\n          // Plot lines to subsequent points\n          for (let i = 1; i < element.route.length; i++) {\n            gerber.add(\"plot_operation\", {\n              x: element.route[i].x,\n              y: mfy(element.route[i].y),\n            })\n          }\n\n          glayer.push(...gerber.build())\n        }\n      } else if (\n        element.type === \"pcb_silkscreen_text\" &&\n        outerLayerRefs.includes(layer as any)\n      ) {\n        renderVectorText(\n          element,\n          layer as LayerRef,\n          \"silkscreen\",\n          getApertureConfigFromPcbSilkscreenText,\n        )\n      } else if (element.type === \"pcb_copper_text\" && layer !== \"edgecut\") {\n        renderVectorText(\n          element,\n          layer,\n          \"copper\",\n          getApertureConfigFromPcbCopperText,\n        )\n      } else if (element.type === \"pcb_smtpad\" && element.shape !== \"polygon\") {\n        if (element.layer === layer && outerLayerRefs.includes(layer as any)) {\n          for (const { glayer, apertureConfig } of [\n            {\n              glayer: glayers[getGerberLayerName(layer, \"copper\")],\n              apertureConfig: getApertureConfigFromPcbSmtpad(element),\n            },\n            {\n              glayer: glayers[getGerberLayerName(layer, \"soldermask\")],\n              apertureConfig: getApertureConfigFromPcbSmtpadSoldermask(element),\n            },\n          ]) {\n            const apertureNumber = findApertureNumber(glayer, apertureConfig)\n            const gb = gerberBuilder().add(\"select_aperture\", {\n              aperture_number: apertureNumber,\n            })\n\n            if (element.shape === \"rotated_rect\" && element.ccw_rotation) {\n              gb.add(\"load_rotation\", {\n                rotation_degrees: element.ccw_rotation,\n              })\n            }\n\n            gb.add(\"flash_operation\", { x: element.x, y: mfy(element.y) })\n\n            if (element.shape === \"rotated_rect\" && element.ccw_rotation) {\n              // Reset rotation\n              gb.add(\"load_rotation\", { rotation_degrees: 0 })\n            }\n\n            glayer.push(...gb.build())\n          }\n        }\n      } else if (element.type === \"pcb_smtpad\" && element.shape === \"polygon\") {\n        if (element.layer === layer && outerLayerRefs.includes(layer as any)) {\n          const layers_to_add_to = [\n            glayers[getGerberLayerName(layer, \"copper\")],\n          ]\n\n          if (element.is_covered_with_solder_mask !== true) {\n            layers_to_add_to.push(\n              glayers[getGerberLayerName(layer, \"soldermask\")],\n            )\n          }\n\n          for (const glayer of layers_to_add_to) {\n            const pad_builder = gerberBuilder()\n              .add(\"select_aperture\", { aperture_number: 10 })\n              .add(\"start_region_statement\", {})\n\n            const { points } = element\n            if (points && points.length > 0) {\n              pad_builder.add(\"move_operation\", {\n                x: points[0].x,\n                y: mfy(points[0].y),\n              })\n              for (let i = 1; i < points.length; i++) {\n                pad_builder.add(\"plot_operation\", {\n                  x: points[i].x,\n                  y: mfy(points[i].y),\n                })\n              }\n              pad_builder.add(\"plot_operation\", {\n                x: points[0].x,\n                y: mfy(points[0].y),\n              })\n            }\n\n            pad_builder.add(\"end_region_statement\", {})\n\n            glayer.push(...pad_builder.build())\n          }\n        }\n      } else if (element.type === \"pcb_solder_paste\") {\n        if (element.layer === layer && outerLayerRefs.includes(layer as any)) {\n          const glayer = glayers[getGerberLayerName(layer, \"paste\")]\n          let rotation = 0\n          if (\n            \"ccw_rotation\" in element &&\n            typeof element.ccw_rotation === \"number\"\n          ) {\n            rotation = element.ccw_rotation\n          } else {\n            // Solder paste has no rotation, so use the matching plated hole's rotation.\n            const platedHole = circuitJson.find(\n              (\n                candidate,\n              ): candidate is PcbPlatedHole & { ccw_rotation: number } =>\n                candidate.type === \"pcb_plated_hole\" &&\n                candidate.x === element.x &&\n                candidate.y === element.y &&\n                \"ccw_rotation\" in candidate &&\n                typeof candidate.ccw_rotation === \"number\",\n            )\n            if (platedHole) {\n              rotation = platedHole.ccw_rotation\n            }\n          }\n\n          let apertureConfig = getApertureConfigFromPcbSolderPaste(element)\n          if (\n            element.shape === \"pill\" &&\n            (rotation === 90 || rotation === 270)\n          ) {\n            apertureConfig = getApertureConfigFromPcbSolderPaste({\n              ...element,\n              width: element.height,\n              height: element.width,\n            })\n            rotation = 0\n          }\n\n          const aperture_number = findApertureNumber(glayer, apertureConfig)\n\n          const gb = gerberBuilder().add(\"select_aperture\", {\n            aperture_number,\n          })\n          if (rotation) {\n            gb.add(\"load_rotation\", {\n              rotation_degrees: rotation,\n            })\n          }\n          gb.add(\"flash_operation\", { x: element.x, y: mfy(element.y) })\n          if (rotation) {\n            gb.add(\"load_rotation\", { rotation_degrees: 0 })\n          }\n          glayer.push(...gb.build())\n        }\n      } else if (element.type === \"pcb_plated_hole\") {\n        if (element.layers.includes(layer as any)) {\n          const layersToAddTo = [\n            glayers[getGerberLayerName(layer, \"copper\")],\n          ] as AnyGerberCommand[][]\n          if (\n            outerLayerRefs.includes(layer as any) &&\n            element.is_covered_with_solder_mask !== true\n          ) {\n            layersToAddTo.push(glayers[getGerberLayerName(layer, \"soldermask\")])\n          }\n          for (const glayer of layersToAddTo) {\n            // --- Compute effective copper pad dimensions ---\n            const holeW =\n              \"hole_width\" in element && typeof element.hole_width === \"number\"\n                ? element.hole_width\n                : 0\n            const holeH =\n              \"hole_height\" in element &&\n              typeof element.hole_height === \"number\"\n                ? element.hole_height\n                : 0\n\n            const padWidthCandidates: number[] = [holeW]\n            if (\n              \"outer_width\" in element &&\n              typeof element.outer_width === \"number\"\n            ) {\n              padWidthCandidates.push(element.outer_width)\n            }\n            if (\n              \"rect_pad_width\" in element &&\n              typeof element.rect_pad_width === \"number\"\n            ) {\n              padWidthCandidates.push(element.rect_pad_width)\n            }\n            const padW = Math.max(...padWidthCandidates)\n\n            const padHeightCandidates: number[] = [holeH]\n            if (\n              \"outer_height\" in element &&\n              typeof element.outer_height === \"number\"\n            ) {\n              padHeightCandidates.push(element.outer_height)\n            }\n            if (\n              \"rect_pad_height\" in element &&\n              typeof element.rect_pad_height === \"number\"\n            ) {\n              padHeightCandidates.push(element.rect_pad_height)\n            }\n            const padH = Math.max(...padHeightCandidates)\n\n            if (element.shape === \"pill\") {\n              // Use min dimension as slot width (aperture circle)\n              const circleApertureConfig = {\n                standard_template_code: \"C\" as const,\n                diameter: Math.min(padW, padH),\n              }\n\n              let aperture_number: number\n              try {\n                aperture_number = findApertureNumber(\n                  glayer,\n                  circleApertureConfig,\n                )\n              } catch {\n                aperture_number =\n                  Math.max(\n                    ...glayer\n                      .filter((cmd) => \"aperture_number\" in cmd)\n                      .map((cmd) => cmd.aperture_number),\n                    9,\n                  ) + 1\n\n                glayer.push(\n                  ...gerberBuilder()\n                    .add(\"define_aperture_template\", {\n                      aperture_number,\n                      ...circleApertureConfig,\n                    })\n                    .build(),\n                )\n              }\n\n              const gb = gerberBuilder().add(\"select_aperture\", {\n                aperture_number,\n              })\n\n              const rotationRadians =\n                ((element.ccw_rotation ?? 0) * Math.PI) / 180\n              const cosTheta = Math.cos(rotationRadians)\n              const sinTheta = Math.sin(rotationRadians)\n\n              const rotateAndTranslate = (dx: number, dy: number) => {\n                const rotatedX = dx * cosTheta - dy * sinTheta\n                const rotatedY = dx * sinTheta + dy * cosTheta\n                return {\n                  x: element.x + rotatedX,\n                  y: element.y + rotatedY,\n                }\n              }\n\n              const isHorizontal = padW >= padH\n              const offset = isHorizontal\n                ? (padW - padH) / 2\n                : (padH - padW) / 2\n\n              if (offset <= 0) {\n                const center = rotateAndTranslate(0, 0)\n                gb.add(\"flash_operation\", { x: center.x, y: mfy(center.y) })\n              } else {\n                const startRelative = isHorizontal\n                  ? { x: -offset, y: 0 }\n                  : { x: 0, y: -offset }\n                const endRelative = isHorizontal\n                  ? { x: offset, y: 0 }\n                  : { x: 0, y: offset }\n\n                const startPoint = rotateAndTranslate(\n                  startRelative.x,\n                  startRelative.y,\n                )\n                const endPoint = rotateAndTranslate(\n                  endRelative.x,\n                  endRelative.y,\n                )\n\n                gb.add(\"flash_operation\", {\n                  x: startPoint.x,\n                  y: mfy(startPoint.y),\n                })\n                  .add(\"move_operation\", {\n                    x: startPoint.x,\n                    y: mfy(startPoint.y),\n                  })\n                  .add(\"plot_operation\", {\n                    x: endPoint.x,\n                    y: mfy(endPoint.y),\n                  })\n                  .add(\"flash_operation\", {\n                    x: endPoint.x,\n                    y: mfy(endPoint.y),\n                  })\n              }\n\n              glayer.push(...gb.build())\n            } else {\n              // Non-pill shapes (rect, circle)\n              const apertureConfig = getApertureConfigFromPcbPlatedHole({\n                ...element,\n                ...(element.shape !== \"circle\"\n                  ? { outer_width: padW, outer_height: padH }\n                  : {}),\n              })\n              const rotation =\n                \"rect_ccw_rotation\" in element &&\n                typeof element.rect_ccw_rotation === \"number\" &&\n                Math.abs(padW - padH) > 1e-9\n                  ? element.rect_ccw_rotation\n                  : undefined\n\n              const gb = gerberBuilder().add(\"select_aperture\", {\n                aperture_number: findApertureNumber(glayer, apertureConfig),\n              })\n\n              if (rotation)\n                gb.add(\"load_rotation\", { rotation_degrees: rotation })\n\n              gb.add(\"flash_operation\", { x: element.x, y: mfy(element.y) })\n\n              if (rotation) gb.add(\"load_rotation\", { rotation_degrees: 0 })\n\n              glayer.push(...gb.build())\n            }\n          }\n        }\n      } else if (element.type === \"pcb_hole\") {\n        if (\n          outerLayerRefs.includes(layer as any) &&\n          element.is_covered_with_solder_mask !== true\n        ) {\n          for (const glayer of [\n            glayers[getGerberLayerName(layer, \"soldermask\")],\n          ]) {\n            if (element.hole_shape !== \"circle\") {\n              console.warn(\n                \"NOT IMPLEMENTED: drawing gerber for non-round holes\",\n              )\n              continue\n            }\n            glayer.push(\n              ...gerberBuilder()\n                .add(\"select_aperture\", {\n                  aperture_number: findApertureNumber(\n                    glayer,\n                    getApertureConfigFromCirclePcbHole(element),\n                  ),\n                })\n                .add(\"flash_operation\", { x: element.x, y: mfy(element.y) })\n                .build(),\n            )\n          }\n        }\n      } else if (element.type === \"pcb_via\") {\n        if (element.layers.includes(layer as any)) {\n          const layersToAddTo = [\n            glayers[getGerberLayerName(layer, \"copper\")],\n          ] as AnyGerberCommand[][]\n          if (\n            element.is_tented === false &&\n            outerLayerRefs.includes(layer as any)\n          ) {\n            layersToAddTo.push(glayers[getGerberLayerName(layer, \"soldermask\")])\n          }\n          for (const glayer of layersToAddTo) {\n            glayer.push(\n              ...gerberBuilder()\n                .add(\"select_aperture\", {\n                  aperture_number: findApertureNumber(\n                    glayer,\n                    getApertureConfigFromOuterDiameter(element),\n                  ),\n                })\n                .add(\"flash_operation\", { x: element.x, y: mfy(element.y) })\n                .build(),\n            )\n          }\n        }\n      } else if (element.type === \"pcb_board\" && layer === \"edgecut\") {\n        // Skip boards when a panel exists\n        if (hasPanel) continue\n\n        const glayer = glayers.Edge_Cuts\n        const { width, height, center, outline } = element\n        const gerberBuild = gerberBuilder().add(\"select_aperture\", {\n          aperture_number: 10,\n        })\n        if (outline && outline.length > 2) {\n          const outlinePoints = outline.map((point) => ({\n            x: point.x,\n            y: mfy(point.y),\n          }))\n\n          const firstPoint = outlinePoints[0]\n          gerberBuild.add(\"move_operation\", firstPoint)\n          for (let i = 1; i < outlinePoints.length; i++) {\n            gerberBuild.add(\"plot_operation\", outlinePoints[i])\n          }\n\n          const lastPoint = outlinePoints[outlinePoints.length - 1]\n          if (lastPoint.x !== firstPoint.x || lastPoint.y !== firstPoint.y) {\n            gerberBuild.add(\"plot_operation\", firstPoint)\n          }\n        } else {\n          gerberBuild\n            .add(\"move_operation\", {\n              x: center!.x - width! / 2,\n              y: mfy(center!.y - height! / 2),\n            })\n            .add(\"plot_operation\", {\n              x: center!.x + width! / 2,\n              y: mfy(center!.y - height! / 2),\n            })\n            // .add(\"move_operation\", {\n            //   x: center.x + width / 2,\n            //   y: center.y - height / 2,\n            // })\n            .add(\"plot_operation\", {\n              x: center!.x + width! / 2,\n              y: mfy(center!.y + height! / 2),\n            })\n            // .add(\"move_operation\", {\n            //   x: center.x + width / 2,\n            //   y: center.y + height / 2,\n            // })\n            .add(\"plot_operation\", {\n              x: center!.x - width! / 2,\n              y: mfy(center!.y + height! / 2),\n            })\n            // .add(\"move_operation\", {\n            //   x: center.x - width / 2,\n            //   y: center.y + height / 2,\n            // })\n            .add(\"plot_operation\", {\n              x: center!.x - width! / 2,\n              y: mfy(center!.y - height! / 2),\n            })\n        }\n\n        glayer.push(...gerberBuild.build())\n      } else if (element.type === \"pcb_panel\" && layer === \"edgecut\") {\n        const glayer = glayers.Edge_Cuts\n        const panel = element\n        const { width, height, center } = panel\n        const gerberBuild = gerberBuilder()\n          .add(\"select_aperture\", {\n            aperture_number: 10,\n          })\n          .add(\"move_operation\", {\n            x: center!.x - width! / 2,\n            y: mfy(center!.y - height! / 2),\n          })\n          .add(\"plot_operation\", {\n            x: center!.x + width! / 2,\n            y: mfy(center!.y - height! / 2),\n          })\n          .add(\"plot_operation\", {\n            x: center!.x + width! / 2,\n            y: mfy(center!.y + height! / 2),\n          })\n          .add(\"plot_operation\", {\n            x: center!.x - width! / 2,\n            y: mfy(center!.y + height! / 2),\n          })\n          .add(\"plot_operation\", {\n            x: center!.x - width! / 2,\n            y: mfy(center!.y - height! / 2),\n          })\n\n        glayer.push(...gerberBuild.build())\n      } else if (element.type === \"pcb_cutout\") {\n        if (layer === \"edgecut\") {\n          const ec_layer = glayers.Edge_Cuts\n          const cutout_builder = gerberBuilder().add(\"select_aperture\", {\n            aperture_number: 10,\n          })\n\n          const el = element as PcbCutout\n\n          if (el.shape === \"rect\") {\n            const { center, width, height, rotation, corner_radius } = el\n            const w = width / 2\n            const h = height / 2\n            const r = Math.max(\n              0,\n              Math.min(corner_radius ?? 0, Math.abs(w), Math.abs(h)),\n            )\n\n            const makeTransformMatrix = () => {\n              let transformMatrix = identity()\n              if (rotation) {\n                const angle_rad = (rotation * Math.PI) / 180\n                transformMatrix = rotate(angle_rad)\n              }\n              return compose(translate(center.x, center.y), transformMatrix)\n            }\n\n            const transformMatrix = makeTransformMatrix()\n\n            if (r > 0) {\n              const startPoint = { x: -w + r, y: h }\n\n              let currentPoint = applyToPoint(transformMatrix, startPoint)\n\n              cutout_builder.add(\"move_operation\", {\n                x: currentPoint.x,\n                y: mfy(currentPoint.y),\n              })\n\n              const addLine = (point: { x: number; y: number }) => {\n                const transformedPoint = applyToPoint(transformMatrix, point)\n                cutout_builder.add(\"plot_operation\", {\n                  x: transformedPoint.x,\n                  y: mfy(transformedPoint.y),\n                })\n                currentPoint = transformedPoint\n              }\n\n              const addArc = (options: {\n                point: { x: number; y: number }\n                center: { x: number; y: number }\n              }) => {\n                const transformedPoint = applyToPoint(\n                  transformMatrix,\n                  options.point,\n                )\n                const transformedCenter = applyToPoint(\n                  transformMatrix,\n                  options.center,\n                )\n\n                cutout_builder\n                  .add(\"set_movement_mode_to_clockwise_circular\", {})\n                  .add(\"plot_operation\", {\n                    x: transformedPoint.x,\n                    y: mfy(transformedPoint.y),\n                    i: transformedCenter.x - currentPoint.x,\n                    j: mfy(transformedCenter.y) - mfy(currentPoint.y),\n                  })\n                  .add(\"set_movement_mode_to_linear\", {})\n\n                currentPoint = transformedPoint\n              }\n\n              addLine({ x: w - r, y: h })\n              addArc({\n                point: { x: w, y: h - r },\n                center: { x: w - r, y: h - r },\n              })\n              addLine({ x: w, y: -h + r })\n              addArc({\n                point: { x: w - r, y: -h },\n                center: { x: w - r, y: -h + r },\n              })\n              addLine({ x: -w + r, y: -h })\n              addArc({\n                point: { x: -w, y: -h + r },\n                center: { x: -w + r, y: -h + r },\n              })\n              addLine({ x: -w, y: h - r })\n              addArc({\n                point: { x: -w + r, y: h },\n                center: { x: -w + r, y: h - r },\n              })\n            } else {\n              const points = [\n                { x: -w, y: h }, // Top-left\n                { x: w, y: h }, // Top-right\n                { x: w, y: -h }, // Bottom-right\n                { x: -w, y: -h }, // Bottom-left\n              ]\n\n              const transformedPoints = points.map((p) =>\n                applyToPoint(transformMatrix, p),\n              )\n\n              cutout_builder.add(\"move_operation\", {\n                x: transformedPoints[0].x,\n                y: mfy(transformedPoints[0].y),\n              })\n              for (let i = 1; i < transformedPoints.length; i++) {\n                cutout_builder.add(\"plot_operation\", {\n                  x: transformedPoints[i].x,\n                  y: mfy(transformedPoints[i].y),\n                })\n              }\n              cutout_builder.add(\"plot_operation\", {\n                x: transformedPoints[0].x,\n                y: mfy(transformedPoints[0].y),\n              })\n            }\n          } else if (el.shape === \"circle\") {\n            const { center, radius } = el\n\n            // To draw a circle, we draw two semi-circles\n            const p1 = { x: center.x + radius, y: center.y }\n            const p2 = { x: center.x - radius, y: center.y }\n\n            cutout_builder\n              .add(\"move_operation\", {\n                x: p1.x,\n                y: mfy(p1.y),\n              })\n              .add(\"set_movement_mode_to_counterclockwise_circular\", {})\n              // Draw the first semi-circle (top half if we start from rightmost point)\n              .add(\"plot_operation\", {\n                x: p2.x,\n                y: mfy(p2.y),\n                i: -radius,\n                j: 0,\n              })\n              // Draw the second semi-circle (bottom half)\n              .add(\"plot_operation\", {\n                x: p1.x,\n                y: mfy(p1.y),\n                i: radius,\n                j: 0,\n              })\n              .add(\"set_movement_mode_to_linear\", {})\n          } else if (el.shape === \"polygon\") {\n            const { points } = el\n            if (points.length > 0) {\n              cutout_builder.add(\"move_operation\", {\n                x: points[0].x,\n                y: mfy(points[0].y),\n              })\n              for (let i = 1; i < points.length; i++) {\n                cutout_builder.add(\"plot_operation\", {\n                  x: points[i].x,\n                  y: mfy(points[i].y),\n                })\n              }\n              cutout_builder.add(\"plot_operation\", {\n                x: points[0].x,\n                y: mfy(points[0].y),\n              })\n            }\n          }\n          ec_layer.push(...cutout_builder.build())\n        }\n      }\n    }\n  }\n\n  for (const key of Object.keys(glayers)) {\n    glayers[key as keyof LayerToGerberCommandsMap].push(\n      ...gerberBuilder().add(\"end_of_file\", {}).build(),\n    )\n  }\n\n  return glayers\n}\n"],"mappings":";AAAA,SAAS,SAAS;;;ACWX,IAAM,6BAA6B,CAGxC;AAAA,EACA;AAAA,EACA;AAAA,EACA;AACF,MAIqC;AACnC,SAAO;AAAA,IACL;AAAA,IACA;AAAA,IACA;AAAA,EACF;AACF;;;ADzBO,IAAM,OAAO,2BAA2B;AAAA,EAC7C,cAAc;AAAA,EACd,QAAQ,EAAE,OAAO;AAAA,IACf,cAAc,EAAE,QAAQ,MAAM,EAAE,QAAQ,MAAM;AAAA,IAC9C,QAAQ,EAAE,OAAO;AAAA,EACnB,CAAC;AAAA,EACD,WAAW,CAAC,MAAM,QAAQ,EAAE,MAAM;AACpC,CAAC;;;AEVD,SAAS,KAAAA,UAAS;AAMX,IAAM,MAAM,2BAA2B;AAAA,EAC5C,cAAc;AAAA,EACd,QAAQC,GAAE,OAAO;AAAA,IACf,cAAcA,GAAE,QAAQ,KAAK,EAAE,QAAQ,KAAK;AAAA,EAC9C,CAAC;AAAA,EACD,WAAW,MAAM;AACnB,CAAC;;;ACZD,SAAS,KAAAC,UAAS;AAMX,IAAM,MAAM,2BAA2B;AAAA,EAC5C,cAAc;AAAA,EACd,QAAQC,GAAE,OAAO;AAAA,IACf,cAAcA,GAAE,QAAQ,KAAK,EAAE,QAAQ,KAAK;AAAA,EAC9C,CAAC;AAAA,EACD,WAAW,MAAM;AACnB,CAAC;;;ACZD,SAAS,KAAAC,UAAS;AAGX,IAAM,MAAM,2BAA2B;AAAA,EAC5C,cAAc;AAAA,EACd,QAAQC,GAAE,OAAO;AAAA,IACf,cAAcA,GAAE,QAAQ,KAAK,EAAE,QAAQ,KAAK;AAAA,EAC9C,CAAC;AAAA,EACD,WAAW,MAAM;AACnB,CAAC;;;ACTD,SAAS,KAAAC,UAAS;AAGX,IAAM,MAAM,2BAA2B;AAAA,EAC5C,cAAc;AAAA,EACd,QAAQC,GAAE,OAAO;AAAA,IACf,cAAcA,GAAE,QAAQ,KAAK,EAAE,QAAQ,KAAK;AAAA,IAC5C,GAAGA,GAAE,OAAO;AAAA,IACZ,GAAGA,GAAE,OAAO;AAAA,IACZ,OAAOA,GAAE,OAAO;AAAA;AAAA,EAClB,CAAC;AAAA,EACD,WAAW,CAAC,EAAE,GAAG,EAAE,MAAM,OAAO,EAAE,QAAQ,CAAC,CAAC,IAAI,EAAE,QAAQ,CAAC,CAAC;AAC9D,CAAC;;;ACZD,SAAS,KAAAC,UAAS;AAGX,IAAM,MAAM,2BAA2B;AAAA,EAC5C,cAAc;AAAA,EACd,QAAQC,GAAE,OAAO;AAAA,IACf,cAAcA,GAAE,QAAQ,KAAK,EAAE,QAAQ,KAAK;AAAA,EAC9C,CAAC;AAAA,EACD,WAAW,MAAM;AACnB,CAAC;;;ACTD,SAAS,KAAAC,UAAS;AAMX,IAAM,MAAM,2BAA2B;AAAA,EAC5C,cAAc;AAAA,EACd,QAAQC,GAAE,OAAO;AAAA,IACf,cAAcA,GAAE,QAAQ,KAAK,EAAE,QAAQ,KAAK;AAAA,EAC9C,CAAC;AAAA,EACD,WAAW,MAAM;AACnB,CAAC;;;ACZD,SAAS,KAAAC,UAAS;AAMX,IAAM,MAAM,2BAA2B;AAAA,EAC5C,cAAc;AAAA,EACd,QAAQC,GAAE,OAAO;AAAA,IACf,cAAcA,GAAE,QAAQ,KAAK,EAAE,QAAQ,KAAK;AAAA,EAC9C,CAAC;AAAA,EACD,WAAW,MAAM;AACnB,CAAC;;;ACZD,SAAS,KAAAC,UAAS;AAGX,IAAM,MAAM,2BAA2B;AAAA,EAC5C,cAAc;AAAA,EACd,QAAQC,GAAE,OAAO;AAAA,IACf,cAAcA,GAAE,QAAQ,KAAK,EAAE,QAAQ,KAAK;AAAA,EAC9C,CAAC;AAAA,EACD,WAAW,MAAM;AACnB,CAAC;;;ACTD,SAAS,KAAAC,WAAS;AAGX,IAAM,MAAM,2BAA2B;AAAA,EAC5C,cAAc;AAAA,EACd,QAAQC,IAAE,OAAO;AAAA,IACf,cAAcA,IAAE,QAAQ,KAAK,EAAE,QAAQ,KAAK;AAAA,EAC9C,CAAC;AAAA,EACD,WAAW,MAAM;AACnB,CAAC;;;ACTD,SAAS,KAAAC,WAAS;AAGX,IAAM,MAAM,2BAA2B;AAAA,EAC5C,cAAc;AAAA,EACd,QAAQC,IAAE,OAAO;AAAA,IACf,cAAcA,IAAE,QAAQ,KAAK,EAAE,QAAQ,KAAK;AAAA,EAC9C,CAAC;AAAA,EACD,WAAW,MAAM;AACnB,CAAC;;;ACTD,SAAS,KAAAC,WAAS;AAGX,IAAM,cAAc,2BAA2B;AAAA,EACpD,cAAc;AAAA,EACd,QAAQC,IAAE,OAAO;AAAA,IACf,cAAcA,IAAE,QAAQ,aAAa,EAAE,QAAQ,aAAa;AAAA,IAC5D,aAAaA,IAAE,OAAO;AAAA,IACtB,UAAUA,IAAE,OAAO;AAAA,EACrB,CAAC;AAAA,EACD,WAAW,CAAC,MAAM,IAAI,EAAE,WAAW,IAAI,EAAE,SAAS,QAAQ,CAAC,CAAC;AAC9D,CAAC;;;ACXD,SAAS,KAAAC,WAAS;AAGX,IAAM,WAAW,2BAA2B;AAAA,EACjD,cAAc;AAAA,EACd,QAAQC,IAAE,OAAO;AAAA,IACf,cAAcA,IAAE,QAAQ,UAAU,EAAE,QAAQ,UAAU;AAAA,IACtD,GAAGA,IAAE,OAAO;AAAA,IACZ,GAAGA,IAAE,OAAO;AAAA,EACd,CAAC;AAAA,EACD,WAAW,CAAC,MAAM,IAAI,EAAE,EAAE,QAAQ,CAAC,CAAC,IAAI,EAAE,EAAE,QAAQ,CAAC,CAAC;AACxD,CAAC;;;ACXD,SAAS,KAAAC,WAAS;AAGX,IAAM,mBAAmB,2BAA2B;AAAA,EACzD,cAAc;AAAA,EACd,QAAQC,IAAE,OAAO;AAAA,IACf,cAAcA,IAAE,QAAQ,kBAAkB,EAAE,QAAQ,kBAAkB;AAAA,IACtE,gBAAgBA,IAAE,OAAO;AAAA,IACzB,iBAAiBA,IAAE,OAAO;AAAA,EAC5B,CAAC;AAAA,EACD,UAAU,EAAE,gBAAgB,gBAAgB,GAAG;AAC7C,WAAO,SAAS,cAAc,IAAI,eAAe;AAAA,EACnD;AACF,CAAC;;;ACbD,SAAS,KAAAC,WAAS;AAGX,IAAM,iBAAiB,2BAA2B;AAAA,EACvD,cAAc;AAAA,EACd,QAAQC,IAAE,OAAO;AAAA,IACf,cAAcA,IAAE,QAAQ,gBAAgB,EAAE,QAAQ,gBAAgB;AAAA,IAClE,MAAMA,IAAE,OAAO;AAAA,EACjB,CAAC;AAAA,EACD,UAAU,EAAE,KAAK,GAAG;AAClB,WAAO,KAAK,IAAI;AAAA,EAClB;AACF,CAAC;;;ACZD,SAAS,KAAAC,WAAS;AAGX,IAAM,SAAS,2BAA2B;AAAA,EAC/C,cAAc;AAAA,EACd,QAAQC,IAAE,OAAO;AAAA,IACf,cAAcA,IAAE,QAAQ,QAAQ,EAAE,QAAQ,QAAQ;AAAA,EACpD,CAAC;AAAA,EACD,WAAW,MAAM;AACnB,CAAC;;;ACTD,SAAS,KAAAC,WAAS;AAGX,IAAM,cAAc,2BAA2B;AAAA,EACpD,cAAc;AAAA,EACd,QAAQC,IAAE,OAAO;AAAA,IACf,cAAcA,IAAE,QAAQ,aAAa,EAAE,QAAQ,aAAa;AAAA,IAC5D,MAAMA,IAAE,MAAM,CAACA,IAAE,QAAQ,MAAM,GAAGA,IAAE,QAAQ,QAAQ,CAAC,CAAC;AAAA,IACtD,IAAIA,IACD,MAAM,CAACA,IAAE,QAAQ,IAAI,GAAGA,IAAE,QAAQ,IAAI,CAAC,CAAC,EACxC,SAAS,EACT,QAAQ,IAAI;AAAA,EACjB,CAAC;AAAA,EACD,UAAU,GAAG;AACX,WAAO,GAAG,EAAE,IAAI,GAAG,CAAC,EAAE,KAAK,KAAK,IAAI,EAAE,EAAE,EAAE;AAAA,EAC5C;AACF,CAAC;;;AChBD,SAAS,KAAAC,WAAS;AAGX,IAAM,WAAW,2BAA2B;AAAA,EACjD,cAAc;AAAA,EACd,QAAQC,IAAE,OAAO;AAAA,IACf,cAAcA,IAAE,QAAQ,UAAU,EAAE,QAAQ,UAAU;AAAA,IACtD,aAAaA,IAAE,OAAO;AAAA,EACxB,CAAC;AAAA,EACD,WAAW,CAAC,MAAM,IAAI,EAAE,WAAW;AACrC,CAAC;;;ACVD,SAAS,KAAAC,WAAS;AAGX,IAAM,uBAAuB,2BAA2B;AAAA,EAC7D,cAAc;AAAA,EACd,QAAQC,IAAE,OAAO;AAAA,IACf,cAAcA,IACX,QAAQ,sBAAsB,EAC9B,QAAQ,sBAAsB;AAAA,IACjC,WAAWA,IAAE,QAAQ;AAAA,EACvB,CAAC;AAAA,EACD,UAAU,EAAE,UAAU,GAAG;AACvB,WAAO,YACH,oDACA;AAAA,EACN;AACF,CAAC;;;AChBD,SAAS,KAAAC,WAAS;AAGX,IAAM,eAAe,2BAA2B;AAAA,EACrD,cAAc;AAAA,EACd,QAAQC,IAAE,OAAO;AAAA,IACf,cAAcA,IAAE,QAAQ,cAAc,EAAE,QAAQ,cAAc;AAAA,EAChE,CAAC;AAAA,EACD,WAAW,MAAM;AACnB,CAAC;;;ACLM,IAAM,6BAA6B;AAAA,EACxC;AAAA,EACA;AAAA,EACA;AAAA,EACA;AAAA,EACA;AAAA,EACA;AAAA,EACA;AAAA,EACA;AAAA,EACA;AAAA,EACA,GAAS;AAAA,EACT;AAAA,EACA;AAAA,EACA;AAAA,EACA;AAAA,EACA;AAAA,EACA;AAAA,EACA;AAAA,EACA;AAAA,EACA;AAAA,EACA;AAAA,EACA;AACF;;;ACrBO,IAAM,yBAAyB,CACpC,aACG;AACH,SAAO,SACJ,IAAI,CAAC,MAAM;AACV,UAAM,MAAM,2BAA2B,EAAE,YAAY;AACrD,WAAO,IAAI,UAAU,CAAQ;AAAA,EAC/B,CAAC,EACA,KAAK,IAAI;AACd;;;ACRA,IAAM,uBAAN,MAA2B;AAAA,EACzB;AAAA,EAEA,cAAc;AACZ,SAAK,WAAW,CAAC;AAAA,EACnB;AAAA,EAEA,IACE,KACA,OACsB;AACtB,SAAK,SAAS,KAAK;AAAA,MACjB,GAAI;AAAA,QACF,cAAc,2BAA2B,GAAG,EAAE;AAAA,MAChD;AAAA,MACA,GAAG;AAAA,IACL,CAAC;AACD,WAAO;AAAA,EACT;AAAA,EAEA,QAAwC;AACtC,WAAO,KAAK;AAAA,EACd;AACF;AAEO,IAAM,gBAAgB,MAAM,IAAI,qBAAqB;;;ACtB5D,IAAM,gBAAgB,CAAC,gBAA0C;AAC/D,QAAM,QAAQ,YAAY,KAAK,CAAC,YAAY,QAAQ,SAAS,WAAW;AAGxE,MAAI,CAAC,SAAS,OAAO,MAAM,eAAe,UAAU;AAClD,WAAO;AAAA,EACT;AACA,SAAO,KAAK,IAAI,GAAG,MAAM,UAAU;AACrC;AAEA,IAAM,iBAAiB,CAAC,OAAiB,eAAuB;AAC9D,MAAI,UAAU,MAAO,QAAO;AAC5B,MAAI,UAAU,SAAU,QAAO;AAE/B,QAAM,kBAAkB,MAAM,MAAM,gBAAgB;AACpD,MAAI,iBAAiB;AACnB,UAAM,mBAAmB,OAAO,gBAAgB,CAAC,CAAC;AAClD,QAAI,oBAAoB,KAAK,oBAAoB,aAAa,GAAG;AAC/D,aAAO,mBAAmB;AAAA,IAC5B;AAAA,EACF;AAEA,QAAM,IAAI,MAAM,kBAAkB,KAAK,SAAS,UAAU,cAAc;AAC1E;AAEA,IAAM,qBAAqB,CACzB,MACA,eACmB;AACnB,QAAM,kBAAkB,eAAe,KAAK,YAAY,UAAU;AAClE,QAAM,gBAAgB,eAAe,KAAK,UAAU,UAAU;AAE9D,MAAI,mBAAmB,eAAe;AACpC,WAAO;AAAA,EACT;AAEA,SAAO;AAAA,IACL,YAAY,KAAK;AAAA,IACjB,UAAU,KAAK;AAAA,EACjB;AACF;AAEA,IAAM,4BAA4B,CAChC,SACA,eAC+B;AAC/B,MAAI,QAAQ,SAAS,qBAAqB,QAAQ,SAAS,WAAW;AACpE,WAAO;AAAA,EACT;AAEA,MACE,gBAAgB,WAChB,OAAO,QAAQ,eAAe,YAC9B,cAAc,WACd,OAAO,QAAQ,aAAa,UAC5B;AACA,WAAO;AAAA,MACL;AAAA,QACE,YAAY,QAAQ;AAAA,QACpB,UAAU,QAAQ;AAAA,MACpB;AAAA,MACA;AAAA,IACF;AAAA,EACF;AAEA,MAAI,SAAqB,CAAC;AAC1B,MAAI,YAAY,WAAW,MAAM,QAAQ,QAAQ,MAAM,GAAG;AACxD,aAAS,QAAQ;AAAA,EACnB;AACA,MAAI,OAAO,SAAS,GAAG;AACrB,UAAM,eAAe,CAAC,GAAG,MAAM,EAAE;AAAA,MAC/B,CAAC,GAAG,MAAM,eAAe,GAAG,UAAU,IAAI,eAAe,GAAG,UAAU;AAAA,IACxE;AACA,WAAO;AAAA,MACL,YAAY,aAAa,CAAC;AAAA,MAC1B,UAAU,aAAa,aAAa,SAAS,CAAC;AAAA,IAChD;AAAA,EACF;AAEA,SAAO;AAAA,IACL,YAAY;AAAA,IACZ,UAAU;AAAA,EACZ;AACF;AAEA,IAAM,iCAAiC,OAAuB;AAAA,EAC5D,YAAY;AAAA,EACZ,UAAU;AACZ;AAEA,IAAM,wBAAwB,CAAC,eAAgC;AAC7D,MAAI,YAAY;AACd,WAAO;AAAA,EACT;AACA,SAAO,+BAA+B;AACxC;AAEA,IAAM,kBAAkB,CACtB,GACA,GACA,eACG;AACH,QAAM,cAAc,mBAAmB,GAAG,UAAU;AACpD,QAAM,cAAc,mBAAmB,GAAG,UAAU;AACpD,SACE,YAAY,eAAe,YAAY,cACvC,YAAY,aAAa,YAAY;AAEzC;AAEA,IAAM,uBAAuB,CAAC;AAAA,EAC5B;AAAA,EACA;AAAA,EACA;AAAA,EACA;AACF,MAKM;AACJ,MACE,QAAQ,SAAS,qBACjB,QAAQ,SAAS,cACjB,QAAQ,SAAS,WACjB;AACA,WAAO;AAAA,EACT;AAEA,MAAI,CAAC,UAAW,QAAO,QAAQ,SAAS;AACxC,MAAI,QAAQ,SAAS,WAAY,QAAO;AAExC,QAAM,mBAAmB,0BAA0B,SAAS,UAAU;AACtE,MAAI,CAAC,iBAAkB,QAAO;AAC9B,QAAM,qBAAqB,sBAAsB,UAAU;AAE3D,SAAO,gBAAgB,kBAAkB,oBAAoB,UAAU;AACzE;AAEA,IAAM,2BAA2B,CAAC;AAAA,EAChC;AAAA,EACA;AAAA,EACA;AACF,MAIM;AACJ,QAAM,aAAa,cAAc,WAAW;AAC5C,MAAI,CAAC,UAAW,QAAO,eAAe,UAAU;AAEhD,QAAM,qBAAqB,sBAAsB,UAAU;AAC3D,QAAM,OAAO,mBAAmB,oBAAoB,UAAU;AAC9D,SAAO,UAAU,eAAe,KAAK,YAAY,UAAU,CAAC,IAAI,eAAe,KAAK,UAAU,UAAU,CAAC;AAC3G;AAEA,IAAM,2BAA2B,CAC/B,gBAC6B;AAC7B,QAAM,YAAsC,CAAC;AAE7C,aAAW,WAAW,aAAa;AACjC,QAAI,QAAQ,SAAS,aAAa;AAChC;AAAA,IACF;AAEA,eAAW,CAAC,OAAO,KAAK,KAAK,QAAQ,MAAM,QAAQ,GAAG;AACpD,UACE,MAAM,eAAe,SACrB,OAAO,MAAM,kBAAkB,YAC/B,OAAO,MAAM,mBAAmB,UAChC;AACA;AAAA,MACF;AAEA,gBAAU,KAAK;AAAA,QACb,MAAM;AAAA,QACN,YAAY,GAAG,QAAQ,YAAY,cAAc,KAAK;AAAA,QACtD,GAAG,MAAM;AAAA,QACT,GAAG,MAAM;AAAA,QACT,eAAe,MAAM;AAAA,QACrB,gBAAgB,MAAM;AAAA,QACtB,YAAY,MAAM;AAAA,QAClB,UAAU,MAAM;AAAA,QAChB,QAAQ,CAAC,MAAM,YAAY,MAAM,QAAQ;AAAA,MAC3C,CAAC;AAAA,IACH;AAAA,EACF;AAEA,SAAO;AACT;AAEA,IAAM,uBAAuB,CAAC,gBAA0C;AAAA,EACtE,GAAG;AAAA,EACH,GAAG,yBAAyB,WAAW;AACzC;AAEO,IAAM,qCAAqC,CAAC;AAAA,EACjD;AAAA,EACA;AAAA,EACA,cAAc;AAAA,EACd;AACF,MAKsC;AACpC,QAAM,UAAU,cAAc;AAC9B,QAAM,aAAa,cAAc,WAAW;AAC5C,QAAM,oBAAoB,qBAAqB,WAAW;AAG1D,UAAQ,IAAI,OAAO,CAAC,CAAC;AAGrB,QAAM,YAAW,oBAAI,KAAK,GAAE,YAAY;AACxC,UACG,IAAI,kBAAkB;AAAA,IACrB,MAAM,+BAA+B,QAAQ;AAAA,EAC/C,CAAC,EACA,IAAI,kBAAkB;AAAA,IACrB,MAAM;AAAA,EACR,CAAC,EACA,IAAI,oBAAoB;AAAA,IACvB,gBAAgB;AAAA,IAChB,iBAAiB;AAAA,EACnB,CAAC,EACA,IAAI,oBAAoB;AAAA,IACvB,gBAAgB;AAAA,IAChB,iBAAiB;AAAA,EACnB,CAAC,EACA,IAAI,oBAAoB;AAAA,IACvB,gBAAgB;AAAA,IAChB,iBAAiB,yBAAyB;AAAA,MACxC;AAAA,MACA;AAAA,MACA;AAAA,IACF,CAAC;AAAA,EACH,CAAC,EACA,IAAI,QAAQ,EAAE,QAAQ,EAAE,CAAC,EACzB,IAAI,eAAe,EAAE,MAAM,UAAU,IAAI,KAAK,CAAC;AAElD,MAAI,eAAe;AAEnB,QAAM,uBAA+C,CAAC;AAGtD,aAAW,WAAW,mBAAmB;AACvC,QACE,CAAC,qBAAqB;AAAA,MACpB;AAAA,MACA;AAAA,MACA;AAAA,MACA;AAAA,IACF,CAAC,GACD;AACA;AAAA,IACF;AAEA,UAAM,eACJ,mBAAmB,WAAW,OAAO,QAAQ,kBAAkB,WAC3D,QAAQ,gBACR,gBAAgB,WACd,OAAO,QAAQ,eAAe,YAC9B,iBAAiB,WACjB,OAAO,QAAQ,gBAAgB,WAC/B,KAAK,IAAI,QAAQ,YAAY,QAAQ,WAAW,IAChD;AAER,QAAI,CAAC,aAAc;AAEnB,QAAI,CAAC,qBAAqB,YAAY,GAAG;AACvC,cAAQ,IAAI,wBAAwB;AAAA,QAClC;AAAA,MACF,CAAC;AACD,cAAQ,IAAI,eAAe;AAAA,QACzB,aAAa;AAAA,QACb,UAAU;AAAA,MACZ,CAAC;AACD,2BAAqB,YAAY,IAAI;AACrC;AAAA,IACF;AAAA,EACF;AAEA,UAAQ,IAAI,gBAAgB,CAAC,CAAC;AAC9B,UAAQ,IAAI,OAAO,CAAC,CAAC;AACrB,UAAQ,IAAI,OAAO,CAAC,CAAC;AAKrB,WAAS,IAAI,IAAI,IAAI,cAAc,KAAK;AACtC,YAAQ,IAAI,YAAY,EAAE,aAAa,EAAE,CAAC;AAC1C,eAAW,WAAW,mBAAmB;AACvC,UACE,QAAQ,SAAS,qBACjB,QAAQ,SAAS,cACjB,QAAQ,SAAS,WACjB;AACA,YACE,CAAC,qBAAqB;AAAA,UACpB;AAAA,UACA;AAAA,UACA;AAAA,UACA;AAAA,QACF,CAAC,GACD;AACA;AAAA,QACF;AAEA,cAAM,eACJ,mBAAmB,WACnB,OAAO,QAAQ,kBAAkB,WAC7B,QAAQ,gBACR,gBAAgB,WACd,OAAO,QAAQ,eAAe,YAC9B,iBAAiB,WACjB,OAAO,QAAQ,gBAAgB,WAC/B,KAAK,IAAI,QAAQ,YAAY,QAAQ,WAAW,IAChD;AAER,YAAI,CAAC,gBAAgB,qBAAqB,YAAY,MAAM,GAAG;AAC7D;AAAA,QACF;AAEA,cAAM,WACJ,OAAO,WAAW,OAAO,QAAQ,MAAM,WAAW,QAAQ,IAAI;AAChE,cAAM,WACJ,OAAO,WAAW,OAAO,QAAQ,MAAM,WAAW,QAAQ,IAAI;AAChE,cAAM,UACJ,mBAAmB,WACnB,OAAO,QAAQ,kBAAkB,WAC7B,QAAQ,gBACR;AACN,cAAM,UACJ,mBAAmB,WACnB,OAAO,QAAQ,kBAAkB,WAC7B,QAAQ,gBACR;AACN,cAAM,UAAU,WAAW;AAC3B,cAAM,UAAU,WAAW;AAC3B,cAAM,cAAc,cAAc,KAAK;AAEvC,YACE,gBAAgB,WAChB,OAAO,QAAQ,eAAe,YAC9B,iBAAiB,WACjB,OAAO,QAAQ,gBAAgB,UAC/B;AACA,gBAAM,YAAY,QAAQ;AAC1B,gBAAM,aAAa,QAAQ;AAC3B,gBAAM,SAAS,KAAK,IAAI,WAAW,UAAU;AAC7C,gBAAM,SAAS,KAAK,IAAI,WAAW,UAAU;AAE7C,cAAI,KAAK,IAAI,SAAS,MAAM,KAAK,MAAM;AACrC,oBAAQ,IAAI,YAAY;AAAA,cACtB,GAAG;AAAA,cACH,GAAG,UAAU;AAAA,YACf,CAAC;AACD;AAAA,UACF;AAEA,gBAAM,kBACJ,uBAAuB,WACvB,OAAO,QAAQ,sBAAsB,WACjC,QAAQ,oBACR,kBAAkB,WAChB,OAAO,QAAQ,iBAAiB,WAChC,QAAQ,eACR;AACR,gBAAM,kBAAmB,kBAAkB,KAAK,KAAM;AACtD,gBAAM,WAAW,KAAK,IAAI,eAAe;AACzC,gBAAM,WAAW,KAAK,IAAI,eAAe;AAEzC,gBAAM,eAAe,aAAa;AAClC,gBAAM,kBAAkB,SAAS,UAAU;AAC3C,gBAAM,gBAAgB,eAClB,EAAE,GAAG,CAAC,gBAAgB,GAAG,EAAE,IAC3B,EAAE,GAAG,GAAG,GAAG,CAAC,eAAe;AAC/B,gBAAM,cAAc,eAChB,EAAE,GAAG,gBAAgB,GAAG,EAAE,IAC1B,EAAE,GAAG,GAAG,GAAG,eAAe;AAE9B,gBAAM,cAAc,CAAC,EAAE,GAAG,EAAE,OAAiC;AAAA,YAC3D,GAAG,IAAI,WAAW,IAAI;AAAA,YACtB,GAAG,IAAI,WAAW,IAAI;AAAA,UACxB;AAEA,gBAAM,aAAa,YAAY,aAAa;AAC5C,gBAAM,WAAW,YAAY,WAAW;AAExC,gBAAM,SAAS,UAAU,WAAW;AACpC,gBAAM,UAAU,UAAU,WAAW,KAAK;AAC1C,gBAAM,OAAO,UAAU,SAAS;AAChC,gBAAM,QAAQ,UAAU,SAAS,KAAK;AAEtC,kBACG,IAAI,YAAY;AAAA,YACf,GAAG;AAAA,YACH,GAAG;AAAA,UACL,CAAC,EACA,IAAI,OAAO;AAAA,YACV,GAAG;AAAA,YACH,GAAG;AAAA,YACH,OAAO;AAAA,UACT,CAAC;AACH;AAAA,QACF;AAEA,gBAAQ,IAAI,YAAY;AAAA,UACtB,GAAG;AAAA,UACH,GAAG,UAAU;AAAA,QACf,CAAC;AAAA,MACH;AAAA,IACF;AAAA,EACF;AAEA,UAAQ,IAAI,OAAO,CAAC,CAAC;AAErB,SAAO,QAAQ,MAAM;AACvB;AAEA,IAAM,uBAAuB,CAAC,MAAsB,eAAuB;AACzE,QAAM,iBAAiB,mBAAmB,MAAM,UAAU;AAC1D,SAAO,IAAI,eAAe,eAAe,YAAY,UAAU,CAAC,KAAK,eAAe,eAAe,UAAU,UAAU,CAAC;AAC1H;AAEA,IAAM,mBAAmB,CAAC,YAA+B;AACvD,MAAI,mBAAmB,WAAW,OAAO,QAAQ,kBAAkB,UAAU;AAC3E,WAAO;AAAA,EACT;AAEA,SACE,gBAAgB,WAChB,OAAO,QAAQ,eAAe,YAC9B,iBAAiB,WACjB,OAAO,QAAQ,gBAAgB;AAEnC;AAEO,IAAM,0CAA0C,CAAC;AAAA,EACtD;AAAA,EACA,cAAc;AAChB,MAGsD;AACpD,QAAM,aAAa,cAAc,WAAW;AAC5C,QAAM,cAAc,IAAI;AAAA,IACtB,qBAAqB,WAAW,EAAE;AAAA,MAChC,CAAC,YAA6C;AAC5C,cAAM,OAAO,0BAA0B,SAAS,UAAU;AAC1D,YAAI,CAAC,MAAM;AACT,iBAAO,CAAC;AAAA,QACV;AACA,eAAO,CAAC,CAAC,qBAAqB,MAAM,UAAU,GAAG,IAAI,CAAC;AAAA,MACxD;AAAA,IACF;AAAA,EACF;AACA,QAAM,oBAAoB,OAAO;AAAA,IAC/B,CAAC,GAAG,YAAY,QAAQ,CAAC,EAAE,KAAK,EAAE,IAAI,CAAC,CAAC,SAAS,IAAI,MAAM;AAAA,MACzD,SAAS,OAAO;AAAA,MAChB,mCAAmC;AAAA,QACjC;AAAA,QACA,WAAW;AAAA,QACX;AAAA,QACA,YAAY;AAAA,MACd,CAAC;AAAA,IACH,CAAC;AAAA,EACH;AACA,QAAM,oBAAoB,YAAY,KAAK,CAAC,YAAY;AACtD,QAAI,QAAQ,SAAS,YAAY;AAC/B,aAAO;AAAA,IACT;AAEA,WAAO,iBAAiB,OAAO;AAAA,EACjC,CAAC;AAED,MAAI,CAAC,mBAAmB;AACtB,WAAO;AAAA,EACT;AAEA,SAAO;AAAA,IACL,GAAG;AAAA,IACH,kBAAkB,mCAAmC;AAAA,MACnD;AAAA,MACA,WAAW;AAAA,MACX;AAAA,IACF,CAAC;AAAA,EACH;AACF;;;ACpfA,SAAS,KAAAC,WAAS;;;ACWX,IAAM,sBAAsB,CAGjC;AAAA,EACA;AAAA,EACA;AAAA,EACA;AACF,MAI8B;AAC5B,SAAO;AAAA,IACL;AAAA,IACA;AAAA,IACA;AAAA,EACF;AACF;;;ADzBO,IAAM,4BAA4B,oBAAoB;AAAA,EAC3D,cAAc;AAAA,EACd,QAAQC,IACL,OAAO;AAAA,IACN,cAAcA,IAAE,QAAQ,IAAI,EAAE,QAAQ,IAAI;AAAA,IAC1C,gBAAgBA,IAAE,OAAO;AAAA,IACzB,iBAAiBA,IAAE,OAAO;AAAA,EAC5B,CAAC,EACA;AAAA,IACC;AAAA,EACF;AAAA,EACF,WAAW,CAAC,EAAE,gBAAgB,gBAAgB,MAAM;AAClD,WAAO,MAAM,cAAc,IAAI,eAAe;AAAA,EAChD;AACF,CAAC;;;AEjBD,SAAS,KAAAC,WAAS;AAGX,IAAM,wBAAwB,oBAAoB;AAAA,EACvD,cAAc;AAAA,EACd,QAAQC,IACL,OAAO;AAAA,IACN,cAAcA,IAAE,QAAQ,IAAI,EAAE,QAAQ,IAAI;AAAA,IAC1C,gBAAgBA,IAAE,OAAO;AAAA,IACzB,iBAAiBA,IAAE,OAAO;AAAA,EAC5B,CAAC,EACA,SAAS,8CAA8C;AAAA,EAC1D,WAAW,CAAC,EAAE,gBAAgB,gBAAgB,MAAM;AAClD,WAAO,OAAO,cAAc,IAAI,eAAe;AAAA,EACjD;AACF,CAAC;;;ACfD,SAAS,KAAAC,WAAS;AAGX,IAAM,0BAA0B,oBAAoB;AAAA,EACzD,cAAc;AAAA,EACd,QAAQC,IACL,OAAO;AAAA,IACN,cAAcA,IAAE,QAAQ,IAAI,EAAE,QAAQ,IAAI;AAAA,IAC1C,gBAAgBA,IAAE,OAAO;AAAA,IACzB,iBAAiBA,IAAE,OAAO;AAAA,EAC5B,CAAC,EACA;AAAA,IACC;AAAA,EACF;AAAA,EACF,WAAW,CAAC,EAAE,gBAAgB,gBAAgB,MAAM;AAClD,WAAO,MAAM,cAAc,IAAI,eAAe;AAAA,EAChD;AACF,CAAC;;;ACjBD,SAAS,KAAAC,WAAS;AAGX,IAAM,iBAAiB,oBAAoB;AAAA,EAChD,cAAc;AAAA,EACd,QAAQC,IACL,OAAO;AAAA,IACN,cAAcA,IAAE,QAAQ,IAAI,EAAE,QAAQ,IAAI;AAAA,IAC1C,OAAOA,IAAE,OAAO;AAAA,EAClB,CAAC,EACA;AAAA,IACC;AAAA,EACF;AAAA,EACF,YAAY;AACV,WAAO;AAAA,EACT;AACF,CAAC;;;AChBD,SAAS,KAAAC,WAAS;AAGX,IAAM,UAAU,oBAAoB;AAAA,EACzC,cAAc;AAAA,EACd,QAAQC,IACL,OAAO;AAAA,IACN,cAAcA,IAAE,QAAQ,KAAK,EAAE,QAAQ,KAAK;AAAA,IAC5C,SAASA,IAAE,OAAO;AAAA,EACpB,CAAC,EACA;AAAA,IACC;AAAA,EACF;AAAA,EACF,WAAW,CAAC,MAAM;AAChB,WAAO,OAAO,EAAE,OAAO;AAAA,EACzB;AACF,CAAC;;;AChBD,SAAS,KAAAC,WAAS;AAGX,IAAM,aAAa,oBAAoB;AAAA,EAC5C,cAAc;AAAA,EACd,QAAQC,IACL,OAAO;AAAA,IACN,cAAcA,IAAE,QAAQ,KAAK,EAAE,QAAQ,KAAK;AAAA,EAC9C,CAAC,EACA;AAAA,IACC;AAAA,EACF;AAAA,EACF,YAAY;AACV,WAAO;AAAA,EACT;AACF,CAAC;;;ACfD,SAAS,KAAAC,WAAS;AAGX,IAAM,kBAAkB,oBAAoB;AAAA,EACjD,cAAc;AAAA,EACd,QAAQC,IACL,OAAO;AAAA,IACN,cAAcA,IAAE,QAAQ,IAAI,EAAE,QAAQ,IAAI;AAAA,IAC1C,eAAeA,IAAE,OAAO;AAAA,EAC1B,CAAC,EACA;AAAA,IACC;AAAA,EACF;AAAA,EACF,YAAY;AACV,WAAO;AAAA,EACT;AACF,CAAC;;;AChBD,SAAS,KAAAC,WAAS;AAGX,IAAM,iCAAiC,oBAAoB;AAAA,EAChE,cAAc;AAAA,EACd,QAAQC,IACL,OAAO;AAAA,IACN,cAAcA,IAAE,QAAQ,IAAI,EAAE,QAAQ,IAAI;AAAA,IAC1C,YAAYA,IAAE,OAAO;AAAA,IACrB,eAAeA,IAAE,OAAO;AAAA,EAC1B,CAAC,EACA,SAAS,wDAAwD;AAAA,EACpE,UAAU,EAAE,YAAY,cAAc,GAAG;AACvC,WAAO,MAAM,UAAU;AAAA,EAAM,aAAa;AAAA,EAC5C;AACF,CAAC;;;ACfD,SAAS,KAAAC,WAAS;AAGX,IAAM,mBAAmB,oBAAoB;AAAA,EAClD,cAAc;AAAA,EACd,QAAQC,IACL,OAAO;AAAA,IACN,cAAcA,IAAE,QAAQ,IAAI,EAAE,QAAQ,IAAI;AAAA,IAC1C,WAAWA,IAAE,OAAO,EAAE,SAAS;AAAA,EACjC,CAAC,EACA;AAAA,IACC;AAAA,EACF;AAAA,EACF,UAAU,EAAE,UAAU,GAAG;AACvB,QAAI,CAAC,WAAW;AACd,aAAO;AAAA,IACT;AACA,WAAO,MAAM,SAAS;AAAA,EACxB;AACF,CAAC;;;ACnBD,SAAS,KAAAC,WAAS;AAGX,IAAM,cAAc,oBAAoB;AAAA,EAC7C,cAAc;AAAA,EACd,QAAQC,IACL,OAAO;AAAA,IACN,cAAcA,IAAE,QAAQ,KAAK,EAAE,QAAQ,KAAK;AAAA,EAC9C,CAAC,EACA,SAAS,mBAAmB;AAAA,EAC/B,YAAY;AACV,WAAO;AAAA,EACT;AACF,CAAC;;;ACbD,SAAS,KAAAC,WAAS;AAGX,IAAM,uBAAuB,oBAAoB;AAAA,EACtD,cAAc;AAAA,EACd,QAAQC,IACL,OAAO;AAAA,IACN,cAAcA,IAAE,QAAQ,KAAK,EAAE,QAAQ,KAAK;AAAA,EAC9C,CAAC,EACA,SAAS,iDAAiD;AAAA,EAC7D,YAAY;AACV,WAAO;AAAA,EACT;AACF,CAAC;;;ACbD,SAAS,KAAAC,WAAS;;;ACcX,IAAM,iCAAiC,CAC5C,kBACW;AACX,QAAM,gBAAgB,gBAAgB;AACtC,MAAI,iBAAiB,cAAc,QAAQ,CAAC;AAE5C,SAAO,eAAe,SAAS,GAAG;AAChC,QAAI,gBAAgB,GAAG;AACrB,uBAAiB,KAAK,eAAe,MAAM,CAAC,CAAC;AAAA,IAC/C,OAAO;AACL,uBAAiB,IAAI,cAAc;AAAA,IACrC;AAAA,EACF;AACA,SAAO;AACT;;;ADxBO,IAAM,kBAAkB,oBAAoB;AAAA,EACjD,cAAc;AAAA,EACd,QAAQC,IACL,OAAO;AAAA,IACN,cAAcA,IAAE,QAAQ,KAAK,EAAE,QAAQ,KAAK;AAAA,IAC5C,GAAGA,IAAE,OAAO;AAAA,IACZ,GAAGA,IAAE,OAAO;AAAA,EACd,CAAC,EACA;AAAA,IACC;AAAA,EACF;AAAA,EACF,UAAU,EAAE,GAAG,EAAE,GAAG;AAClB,UAAM,CAAC,IAAI,EAAE,IAAI,CAAC,GAAG,CAAC,EAAE;AAAA,MAAI,CAAC,UAC3B,+BAA+B,KAAK;AAAA,IACtC;AACA,WAAO,IAAI,EAAE,IAAI,EAAE;AAAA,EACrB;AACF,CAAC;;;AErBD,SAAS,KAAAC,WAAS;AAEX,IAAM,iBAAiBA,IAC3B,OAAO;AAAA,EACN,cAAcA,IAAE,QAAQ,IAAI;AAAA,EAC5B,WAAWA,IAAE,OAAO;AACtB,CAAC,EACA,SAAS,mEAAmE;;;ACP/E,SAAS,KAAAC,WAAS;AAEX,IAAM,gBAAgBA,IAC1B,OAAO;AAAA,EACN,cAAcA,IAAE,QAAQ,IAAI;AAAA,EAC5B,UAAUA,IAAE,OAAO;AACrB,CAAC,EACA;AAAA,EACC;AACF;;;ACTF,SAAS,KAAAC,WAAS;AAGX,IAAM,gBAAgB,oBAAoB;AAAA,EAC/C,cAAc;AAAA,EACd,QAAQC,IACL,OAAO;AAAA,IACN,cAAcA,IAAE,QAAQ,IAAI,EAAE,QAAQ,IAAI;AAAA,IAC1C,kBAAkBA,IAAE,OAAO;AAAA,EAC7B,CAAC,EACA;AAAA,IACC;AAAA,EACF;AAAA,EACF,WAAW,CAAC,EAAE,iBAAiB,MAAM;AACnC,WAAO,MAAM,gBAAgB;AAAA,EAC/B;AACF,CAAC;;;AChBD,SAAS,KAAAC,WAAS;AAEX,IAAM,eAAeA,IACzB,OAAO;AAAA,EACN,cAAcA,IAAE,QAAQ,IAAI;AAAA,EAC5B,SAASA,IAAE,OAAO;AACpB,CAAC,EACA,SAAS,gEAAgE;;;ACN5E,SAAS,KAAAC,WAAS;AAGX,IAAM,iBAAiB,oBAAoB;AAAA,EAChD,cAAc;AAAA,EACd,QAAQC,IACL,OAAO;AAAA,IACN,cAAcA,IAAE,QAAQ,KAAK,EAAE,QAAQ,KAAK;AAAA,IAC5C,GAAGA,IAAE,OAAO;AAAA,IACZ,GAAGA,IAAE,OAAO;AAAA,EACd,CAAC,EACA;AAAA,IACC;AAAA,EACF;AAAA,EACF,UAAU,EAAE,GAAG,EAAE,GAAG;AAClB,UAAM,CAAC,IAAI,EAAE,IAAI,CAAC,GAAG,CAAC,EAAE;AAAA,MAAI,CAAC,UAC3B,+BAA+B,KAAK;AAAA,IACtC;AACA,WAAO,IAAI,EAAE,IAAI,EAAE;AAAA,EACrB;AACF,CAAC;;;ACrBD,SAAS,KAAAC,WAAS;AAIX,IAAM,iBAAiB,oBAAoB;AAAA,EAChD,cAAc;AAAA,EACd,QAAQC,IACL,OAAO;AAAA,IACN,cAAcA,IAAE,QAAQ,KAAK,EAAE,QAAQ,KAAK;AAAA,IAC5C,GAAGA,IAAE,OAAO;AAAA,IACZ,GAAGA,IAAE,OAAO;AAAA,IACZ,GAAGA,IAAE,OAAO,EAAE,SAAS;AAAA,IACvB,GAAGA,IAAE,OAAO,EAAE,SAAS;AAAA,EACzB,CAAC,EACA;AAAA,IACC;AAAA,EACF;AAAA,EACF,UAAU,EAAE,GAAG,GAAG,GAAG,EAAE,GAAG;AACxB,UAAM,KAAK,+BAA+B,CAAC;AAC3C,UAAM,KAAK,+BAA+B,CAAC;AAC3C,QAAI,MAAM,IAAI,EAAE,IAAI,EAAE;AACtB,QAAI,MAAM,UAAa,MAAM,QAAW;AACtC,YAAM,KAAK,+BAA+B,CAAC;AAC3C,YAAM,KAAK,+BAA+B,CAAC;AAC3C,aAAO,IAAI,EAAE,IAAI,EAAE;AAAA,IACrB;AACA,WAAO,GAAG,GAAG;AAAA,EACf;AACF,CAAC;;;AC5BD,SAAS,KAAAC,WAAS;AAEX,IAAM,wBAAwBA,IAClC,OAAO;AAAA,EACN,cAAcA,IAAE,QAAQ,IAAI;AAAA,EAC5B,QAAQA,IAAE,OAAO;AACnB,CAAC,EACA,SAAS,0DAA0D;;;ACPtE,SAAS,KAAAC,WAAS;AAEX,IAAM,8BAA8BA,IACxC,OAAO;AAAA,EACN,cAAcA,IAAE,QAAQ,KAAK;AAAA,EAC7B,QAAQA,IAAE,OAAO;AACnB,CAAC,EACA,SAAS,0DAAqD;;;ACPjE,SAAS,KAAAC,WAAS;AAGX,IAAM,0CAA0C,oBAAoB;AAAA,EACzE,cAAc;AAAA,EACd,QAAQC,IACL,OAAO;AAAA,IACN,cAAcA,IAAE,QAAQ,KAAK,EAAE,QAAQ,KAAK;AAAA,EAC9C,CAAC,EACA;AAAA,IACC;AAAA,EACF;AAAA,EACF,YAAY;AACV,WAAO;AAAA,EACT;AACF,CAAC;;;ACfD,SAAS,KAAAC,WAAS;AAGX,IAAM,iDACX,oBAAoB;AAAA,EAClB,cAAc;AAAA;AAAA,EACd,QAAQC,IACL,OAAO;AAAA,IACN,cAAcA,IAAE,QAAQ,KAAK,EAAE,QAAQ,KAAK;AAAA,EAC9C,CAAC,EACA;AAAA,IACC;AAAA,EACF;AAAA,EACF,YAAY;AACV,WAAO;AAAA,EACT;AACF,CAAC;;;AChBH,SAAS,KAAAC,WAAS;AAGX,IAAM,8BAA8B,oBAAoB;AAAA,EAC7D,cAAc;AAAA,EACd,QAAQC,IACL,OAAO;AAAA,IACN,cAAcA,IAAE,QAAQ,KAAK,EAAE,QAAQ,KAAK;AAAA,EAC9C,CAAC,EACA;AAAA,IACC;AAAA,EACF;AAAA,EACF,YAAY;AACV,WAAO;AAAA,EACT;AACF,CAAC;;;ACfD,SAAS,KAAAC,WAAS;AAGX,IAAM,WAAW,oBAAoB;AAAA,EAC1C,cAAc;AAAA,EACd,QAAQC,IACL,OAAO;AAAA,IACN,cAAcA,IAAE,QAAQ,IAAI,EAAE,QAAQ,IAAI;AAAA,IAC1C,MAAMA,IAAE,KAAK,CAAC,MAAM,IAAI,CAAC;AAAA,EAC3B,CAAC,EACA,SAAS,0CAA0C;AAAA,EACtD,UAAU,EAAE,KAAK,GAAG;AAClB,WAAO,MAAM,IAAI;AAAA,EACnB;AACF,CAAC;;;ACdD,SAAS,KAAAC,WAAS;AAGX,IAAM,yBAAyB,oBAAoB;AAAA,EACxD,cAAc;AAAA,EACd,QAAQC,IACL,OAAO;AAAA,IACN,cAAcA,IAAE,QAAQ,KAAK,EAAE,QAAQ,KAAK;AAAA,EAC9C,CAAC,EACA;AAAA,IACC;AAAA,EACF;AAAA,EACF,YAAY;AACV,WAAO;AAAA,EACT;AACF,CAAC;;;ACfD,SAAS,KAAAC,WAAS;AAEX,IAAM,kBAAkBA,IAC5B,OAAO;AAAA,EACN,cAAcA,IAAE,QAAQ,IAAI;AAAA,EAC5B,WAAWA,IAAE,OAAO;AACtB,CAAC,EACA,SAAS,8DAA8D;;;ACP1E,SAAS,KAAAC,WAAS;AAGX,IAAM,uBAAuB,oBAAoB;AAAA,EACtD,cAAc;AAAA,EACd,QAAQC,IAAE,OAAO;AAAA,IACf,cAAcA,IAAE,QAAQ,IAAI,EAAE,QAAQ,IAAI;AAAA,IAC1C,oBAAoBA,IACjB,MAAM,CAACA,IAAE,QAAQ,GAAG,EAAE,SAAS,uBAAuB,GAAGA,IAAE,QAAQ,GAAG,CAAC,CAAC,EACxE,SAAS,EACT,QAAQ,IAAI;AAAA,IACf,qBAAqBA,IAClB,MAAM;AAAA,MACLA,IAAE,QAAQ,GAAG,EAAE,SAAS,mBAAmB;AAAA,MAC3CA,IAAE,QAAQ,GAAG,EAAE,SAAS,sBAAsB;AAAA,IAChD,CAAC,EACA,QAAQ,GAAG;AAAA,IACd,kBAAkBA,IAAE,OAAO,EAAE,IAAI,EAAE,QAAQ,CAAC;AAAA,IAC5C,kBAAkBA,IAAE,OAAO,EAAE,IAAI,EAAE,QAAQ,CAAC;AAAA,IAC5C,kBAAkBA,IAAE,OAAO,EAAE,IAAI,EAAE,QAAQ,CAAC;AAAA,IAC5C,kBAAkBA,IAAE,OAAO,EAAE,IAAI,EAAE,QAAQ,CAAC;AAAA,EAC9C,CAAC;AAAA,EACD,WAAW,MAAM;AACf,WAAO;AAAA,EACT;AACF,CAAC;;;ACzBD,SAAS,KAAAC,WAAS;AAGX,IAAM,qBAAqB,oBAAoB;AAAA,EACpD,cAAc;AAAA,EACd,QAAQC,IACL,OAAO;AAAA,IACN,cAAcA,IAAE,QAAQ,IAAI,EAAE,QAAQ,IAAI;AAAA,IAC1C,UAAUA,IAAE,KAAK,CAAC,KAAK,GAAG,CAAC;AAAA,EAC7B,CAAC,EACA;AAAA,IACC;AAAA,EACF;AAAA,EACF,UAAU,EAAE,SAAS,GAAG;AACtB,WAAO,MAAM,QAAQ;AAAA,EACvB;AACF,CAAC;;;AChBD,SAAS,KAAAC,WAAS;AAIlB,IAAM,kBAAkBC,IAAE,OAAO;AAAA,EAC/B,wBAAwBA,IAAE,QAAQ,GAAG,EAAE,SAAS,QAAQ;AAAA,EACxD,UAAUA,IAAE,OAAO;AAAA,EACnB,eAAeA,IAAE,OAAO,EAAE,SAAS;AACrC,CAAC;AAED,IAAM,qBAAqBA,IAAE,OAAO;AAAA,EAClC,wBAAwBA,IAAE,QAAQ,GAAG,EAAE,SAAS,WAAW;AAAA,EAC3D,QAAQA,IAAE,OAAO;AAAA,EACjB,QAAQA,IAAE,OAAO;AAAA,EACjB,eAAeA,IAAE,OAAO,EAAE,SAAS;AACrC,CAAC;AAED,IAAM,mBAAmBA,IAAE,OAAO;AAAA,EAChC,wBAAwBA,IAAE,QAAQ,GAAG,EAAE,SAAS,SAAS;AAAA,EACzD,QAAQA,IAAE,OAAO;AAAA,EACjB,QAAQA,IAAE,OAAO;AAAA,EACjB,eAAeA,IAAE,OAAO,EAAE,SAAS;AACrC,CAAC;AAED,IAAM,mBAAmBA,IAAE,OAAO;AAAA,EAChC,wBAAwBA,IAAE,QAAQ,GAAG,EAAE,SAAS,SAAS;AAAA,EACzD,gBAAgBA,IAAE,OAAO;AAAA,EACzB,oBAAoBA,IAAE,OAAO,EAAE,IAAI;AAAA,EACnC,UAAUA,IAAE,OAAO,EAAE,SAAS;AAAA,EAC9B,eAAeA,IAAE,OAAO,EAAE,SAAS;AACrC,CAAC;AAED,IAAM,oCAAoCA,IAAE;AAAA,EAC1C;AAAA,EACA,CAAC,iBAAiB,oBAAoB,kBAAkB,gBAAgB;AAC1E;AAEA,IAAM,qBAAqBA,IAAE,OAAO;AAAA,EAClC,YAAYA,IAAE,QAAQ,UAAU;AAAA,EAChC,QAAQA,IAAE,OAAO;AAAA,EACjB,QAAQA,IAAE,OAAO;AAAA,EACjB,iBAAiBA,IAAE,OAAO;AAAA,EAC1B,sBAAsBA,IAAE,OAAO;AACjC,CAAC;AAED,IAAM,qBAAqBA,IAAE,OAAO;AAAA,EAClC,YAAYA,IAAE,QAAQ,UAAU;AAAA,EAChC,QAAQA,IAAE,OAAO;AAAA,EACjB,QAAQA,IAAE,OAAO;AAAA,EACjB,iBAAiBA,IAAE,OAAO;AAAA,EAC1B,sBAAsBA,IAAE,OAAO;AACjC,CAAC;AAED,IAAM,qBAAqBA,IAAE,OAAO;AAAA,EAClC,YAAYA,IAAE,QAAQ,WAAW;AAAA,EACjC,eAAeA,IAAE,OAAO;AAAA,EACxB,YAAYA,IAAE,OAAO;AAAA,EACrB,YAAYA,IAAE,OAAO;AAAA,EACrB,YAAYA,IAAE,OAAO;AAAA,EACrB,YAAYA,IAAE,OAAO;AAAA,EACrB,YAAYA,IAAE,OAAO;AAAA,EACrB,YAAYA,IAAE,OAAO;AAAA,EACrB,YAAYA,IAAE,OAAO;AAAA,EACrB,YAAYA,IAAE,OAAO;AACvB,CAAC;AAED,IAAM,iCAAiCA,IAAE,mBAAmB,cAAc;AAAA,EACxE;AAAA,EACA;AAAA,EACA;AACF,CAAC;AAED,IAAM,2BAA2BA,IAAE,MAAM;AAAA,EACvC;AAAA,EACA;AACF,CAAC;AAEM,IAAM,2BAA2B,oBAAoB;AAAA,EAC1D,cAAc;AAAA,EACd,QAAQ,yBAAyB;AAAA,IAC/BA,IAAE,OAAO;AAAA,MACP,cAAcA,IAAE,QAAQ,KAAK,EAAE,QAAQ,KAAK;AAAA,MAC5C,iBAAiBA,IAAE,OAAO,EAAE,IAAI;AAAA,IAClC,CAAC;AAAA,EACH;AAAA,EACA,UAAU,OAAO;AACf,QAAI,gBAAgB,OAAO;AACzB,YAAM,EAAE,iBAAiB,WAAW,IAAI;AACxC,UAAI,gBAAgB,OAAO,eAAe,GAAG,UAAU;AAEvD,UAAI,eAAe,cAAc,eAAe,YAAY;AAC1D,yBAAiB,GAAG,MAAM,OAAO,QAAQ,CAAC,CAAC,IAAI,MAAM,OAAO,QAAQ,CAAC,CAAC,IAAI,MAAM,gBAAgB,QAAQ,CAAC,CAAC,IAAI,MAAM,qBAAqB,QAAQ,CAAC,CAAC;AAAA,MACrJ,WAAW,eAAe,aAAa;AAErC,cAAM,IAAI,MAAM,qCAAqC;AAAA,MACvD;AAEA,uBAAiB;AACjB,aAAO;AAAA,IACT;AACA,QAAI,4BAA4B,OAAO;AACrC,YAAM,EAAE,iBAAiB,uBAAuB,IAAI;AACpD,UAAI,gBAAgB,OAAO,eAAe,GAAG,sBAAsB;AAEnE,UAAI,2BAA2B,KAAK;AAClC,yBAAiB,GAAG,MAAM,SAAS,QAAQ,CAAC,CAAC;AAAA,MAC/C,WACE,2BAA2B,OAC3B,2BAA2B,KAC3B;AACA,yBAAiB,GAAG,MAAM,OAAO,QAAQ,CAAC,CAAC,IAAI,MAAM,OAAO,QAAQ,CAAC,CAAC;AAAA,MACxE,WAAW,2BAA2B,KAAK;AACzC,yBAAiB,GAAG,MAAM,cAAc,IAAI,MAAM,kBAAkB,IAClE,MAAM,WAAW,IAAI,MAAM,QAAQ,KAAK,EAC1C;AAAA,MACF;AAEA,UAAI,MAAM,eAAe;AACvB,yBAAiB,IAAI,MAAM,cAAc,QAAQ,CAAC,CAAC;AAAA,MACrD;AAEA,uBAAiB;AAEjB,aAAO;AAAA,IACT;AACA,UAAM,IAAI;AAAA,MACR,qCAAqC,KAAK,UAAU,KAAK,CAAC;AAAA,IAC5D;AAAA,EACF;AACF,CAAC;;;ACjID,SAAS,KAAAC,WAAS;AAGX,IAAM,kBAAkB,oBAAoB;AAAA,EACjD,cAAc;AAAA,EACd,QAAQC,IAAE,OAAO;AAAA,IACf,cAAcA,IAAE,QAAQ,GAAG,EAAE,QAAQ,GAAG;AAAA,IACxC,iBAAiBA,IAAE,OAAO,EAAE,IAAI;AAAA,EAClC,CAAC;AAAA,EACD,UAAU,EAAE,gBAAgB,GAAG;AAC7B,WAAO,IAAI,eAAe;AAAA,EAC5B;AACF,CAAC;;;ACsBM,IAAM,qBAAqB;AAAA,EAChC;AAAA,EACA;AAAA,EACA;AAAA,EACA;AAAA,EACA;AAAA,EACA;AAAA,EACA;AAAA,EACA;AAAA,EACA;AAAA,EACA;AAAA,EACA;AAAA,EACA;AAAA,EACA;AAAA,EACA;AAAA;AAAA;AAAA,EAGA;AAAA;AAAA,EAEA;AAAA;AAAA;AAAA,EAGA;AAAA,EACA;AAAA,EACA;AAAA,EACA;AAAA,EACA;AAAA,EACA;AAAA,EACA;AAAA,EACA;AAAA;AAEF;;;AC7DO,IAAM,gBAAgB,MAAM,IAAI,cAAc;AAErD,IAAM,gBAAN,MAAoB;AAAA,EAClB;AAAA,EAEA,cAAc;AACZ,SAAK,WAAW,CAAC;AAAA,EACnB;AAAA,EAEA,IACE,WACA,IACe;AACf,QAAI,WAAW;AACb,aAAO,GAAG,IAAI;AAAA,IAChB;AACA,WAAO;AAAA,EACT;AAAA,EAEA,IACE,KACA,OACe;AACf,SAAK,SAAS,KAAK;AAAA,MACjB,GAAI,EAAE,cAAc,mBAAmB,GAAG,EAAE,aAAa;AAAA,MACzD,GAAG;AAAA,IACL,CAAC;AACD,WAAO;AAAA,EACT;AAAA,EAEA,QAAiC;AAC/B,WAAO,KAAK;AAAA,EACd;AACF;;;AClCO,IAAM,yBAAyB,CAAC,YAAsC;AAC3E,QAAM,cAAc,OAAO,OAAO,kBAAkB,EAAE;AAAA,IACpD,CAAC,QAAQ,IAAI,iBAAiB,QAAQ;AAAA,EACxC;AAEA,MAAI,CAAC,aAAa;AAChB,UAAM,IAAI;AAAA,MACR,6BAA6B,QAAQ,YAAY;AAAA,IACnD;AAAA,EACF;AAEA,MAAI,CAAC,YAAY,WAAW;AAC1B,UAAM,IAAI;AAAA,MACR,6BAA6B,QAAQ,YAAY;AAAA,IACnD;AAAA,EACF;AAEA,SAAO,YAAY,UAAU,OAAc;AAC7C;;;AClBO,IAAM,+BAA+B,CAC1C,kBAC2B;AAC3B,QAAM,2BAAmD,CAAC;AAC1D,aAAW,aAAa,OAAO,KAAK,aAAa,GAAG;AAClD,6BAAyB,SAAS,IAAI,cAAc,SAAS,EAC1D,IAAI,CAAC,YAAY;AAChB,aAAO,uBAAuB,OAAO;AAAA,IACvC,CAAC,EACA,KAAK,IAAI;AAAA,EACd;AACA,SAAO;AACT;;;ACZO,IAAM,0BAA0B,CACrC,aACW;AACX,SAAO,SACJ,IAAI,CAAC,YAAY;AAChB,WAAO,uBAAuB,OAAO;AAAA,EACvC,CAAC,EACA,KAAK,IAAI;AACd;;;ACRO,SAAS,MAAS,KAA8B;AACrD,QAAM,SAAwB,CAAC;AAC/B,WAAS,IAAI,GAAG,IAAI,IAAI,SAAS,GAAG,KAAK;AACvC,WAAO,KAAK,CAAC,IAAI,CAAC,GAAG,IAAI,IAAI,CAAC,CAAC,CAAC;AAAA,EAClC;AACA,SAAO;AACT;;;ACNO,IAAM,qBAAqB,CAAC,WAAoC;AACrE,SAAO;AAAA,IACL,GAAG,cAAc,EACd,IAAI,WAAW,EAAE,SAAS,wBAAwB,CAAC,EACnD,IAAI,kCAAkC;AAAA,MACrC,YAAY;AAAA,MACZ,eAAe;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA,EAYrB,KAAK;AAAA,IACD,CAAC,EACA,IAAI,kCAAkC;AAAA,MACrC,YAAY;AAAA,MACZ,eAAe;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA,EAWrB,KAAK;AAAA,IACD,CAAC,EACA,IAAI,kCAAkC;AAAA,MACrC,YAAY;AAAA,MACZ,eAAe;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA,EAgBrB,KAAK;AAAA,IACD,CAAC,EACA,IAAI,WAAW,EAAE,SAAS,sBAAsB,CAAC,EACjD,MAAM;AAAA,EACX;AACF;;;AClDA,OAAO,qBAAqB;;;ACTrB,SAAS,kBACd,MAC4B;AAC5B,QAAM,aAAa,KAAK;AAAA,IACtB,CAAC,QAAyB,IAAI,SAAS;AAAA,EACzC;AAEA,QAAM,SAAwC,CAAC;AAE/C,aAAW,SAAS,YAAY;AAC9B,eAAW,WAAW,MAAM,OAAO;AACjC,UAAI,QAAQ,eAAe,QAAQ;AACjC,eAAO,QAAQ,KAAK,IAAI,OAAO,QAAQ,KAAK,KAAK,oBAAI,IAAY;AACjE,eAAO,QAAQ,KAAK,EAAE,IAAI,QAAQ,KAAK;AAAA,MACzC;AAAA,IACF;AAAA,EACF;AAEA,SAAO;AAAA,IACL,KAAK,MAAM,KAAK,OAAO,OAAO,CAAC,CAAC;AAAA,IAChC,QAAQ,MAAM,KAAK,OAAO,UAAU,CAAC,CAAC;AAAA,IACtC,QAAQ,MAAM,KAAK,OAAO,UAAU,CAAC,CAAC;AAAA,IACtC,QAAQ,MAAM,KAAK,OAAO,UAAU,CAAC,CAAC;AAAA,IACtC,QAAQ,MAAM,KAAK,OAAO,UAAU,CAAC,CAAC;AAAA,IACtC,QAAQ,MAAM,KAAK,OAAO,UAAU,CAAC,CAAC;AAAA,IACtC,QAAQ,MAAM,KAAK,OAAO,UAAU,CAAC,CAAC;AAAA,IACtC,QAAQ,MAAM,KAAK,OAAO,UAAU,CAAC,CAAC;AAAA,EACxC;AACF;;;ADXA,IAAM,iCAAiC,CACrC,gBACa;AACb,MAAI,YAAY,WAAW,IAAI,EAAG,QAAO;AACzC,MAAI,YAAY,WAAW,IAAI,EAAG,QAAO;AAEzC,QAAM,kBAAkB,YAAY,MAAM,aAAa;AACvD,MAAI,gBAAiB,QAAO,QAAQ,gBAAgB,CAAC,CAAC;AAEtD,QAAM,IAAI,MAAM,kCAAkC,WAAW,EAAE;AACjE;AAEO,SAAS,wBAAwB;AAAA,EACtC;AAAA,EACA;AAAA,EACA;AACF,GAIG;AACD,QAAM,wBAAwB,MAAM;AAClC,UAAM,0BAA0B,OAAO,OAAO,CAAC,KAAK,YAAY;AAC9D,UAAI,QAAQ,iBAAiB,OAAO;AAClC,eAAO,KAAK,IAAI,KAAK,QAAQ,eAAe;AAAA,MAC9C;AACA,aAAO;AAAA,IACT,GAAG,CAAC;AACJ,QAAI,4BAA4B,GAAG;AACjC,aAAO;AAAA,IACT;AACA,WAAO,0BAA0B;AAAA,EACnC;AAEA,SAAO;AAAA,IACL,GAAG,cAAc,EACd,IAAI,WAAW,EAAE,SAAS,sBAAsB,CAAC,EACjD,MAAM;AAAA,EACX;AAGA,QAAM,cAA0C,kBAAkB,WAAW;AAC7E,QAAM,WAAW,+BAA+B,WAAW;AAC3D,aAAW,SAAS,YAAY,QAAQ,GAAG;AACzC,WAAO;AAAA,MACL,GAAG,cAAc,EACd,IAAI,4BAA4B;AAAA,QAC/B,iBAAiB,sBAAsB;AAAA,QACvC,wBAAwB;AAAA,QACxB,UAAU;AAAA,MACZ,CAAC,EACA,MAAM;AAAA,IACX;AAAA,EACF;AAGA,QAAM,kBAAkB,sCAAsC;AAAA,IAC5D;AAAA,IACA,OAAO;AAAA,IACP;AAAA,EACF,CAAC;AAED,aAAW,kBAAkB,iBAAiB;AAC5C,WAAO;AAAA,MACL,GAAG,cAAc,EACd,IAAI,4BAA4B;AAAA,QAC/B,iBAAiB,sBAAsB;AAAA,QACvC,GAAG;AAAA,MACL,CAAC,EACA,MAAM;AAAA,IACX;AAAA,EACF;AAEA,SAAO;AAAA,IACL,GAAG,cAAc,EACd,IAAI,oBAAoB,CAAC,CAAC,EAC1B,IAAI,WAAW,EAAE,SAAS,oBAAoB,CAAC,EAC/C,MAAM;AAAA,EACX;AACF;AAEO,IAAM,iCAAiC,CAC5C,QAC2B;AAC3B,MAAI,IAAI,UAAU,QAAQ;AACxB,WAAO;AAAA,MACL,wBAAwB;AAAA,MACxB,QAAQ,IAAI;AAAA,MACZ,QAAQ,IAAI;AAAA,IACd;AAAA,EACF;AACA,MAAI,IAAI,UAAU,UAAU;AAC1B,WAAO;AAAA,MACL,wBAAwB;AAAA,MACxB,UAAU,IAAI,SAAS;AAAA,IACzB;AAAA,EACF;AACA,MAAI,IAAI,UAAU,gBAAgB;AAEhC,WAAO;AAAA,MACL,wBAAwB;AAAA,MACxB,QAAQ,IAAI;AAAA,MACZ,QAAQ,IAAI;AAAA,IACd;AAAA,EACF;AACA,MAAI,IAAI,UAAU,WAAW;AAE3B,UAAM,IAAI,MAAM,sDAAsD;AAAA,EACxE;AACA,QAAM,IAAI,MAAM,qBAAsB,IAAY,KAAK,EAAE;AAC3D;AAEO,IAAM,2CAA2C,CACtD,QAC2B;AAC3B,MAAI,mBAAmB;AACvB,MAAI,uBAAuB,OAAO,OAAO,IAAI,sBAAsB,UAAU;AAC3E,uBAAmB,IAAI;AAAA,EACzB;AAEA,MAAI,IAAI,UAAU,QAAQ;AACxB,WAAO;AAAA,MACL,wBAAwB;AAAA,MACxB,QAAQ,IAAI,QAAQ,mBAAmB;AAAA,MACvC,QAAQ,IAAI,SAAS,mBAAmB;AAAA,IAC1C;AAAA,EACF;AACA,MAAI,IAAI,UAAU,UAAU;AAC1B,WAAO;AAAA,MACL,wBAAwB;AAAA,MACxB,UAAU,IAAI,SAAS,IAAI,mBAAmB;AAAA,IAChD;AAAA,EACF;AACA,MAAI,IAAI,UAAU,gBAAgB;AAChC,WAAO;AAAA,MACL,wBAAwB;AAAA,MACxB,QAAQ,IAAI,QAAQ,mBAAmB;AAAA,MACvC,QAAQ,IAAI,SAAS,mBAAmB;AAAA,IAC1C;AAAA,EACF;AACA,MAAI,IAAI,UAAU,WAAW;AAC3B,UAAM,IAAI,MAAM,sDAAsD;AAAA,EACxE;AACA,QAAM,IAAI,MAAM,qBAAsB,IAAY,KAAK,EAAE;AAC3D;AAEO,IAAM,yCAAyC,CACpD,QAC2B;AAC3B,MAAI,kBAAkB,KAAK;AACzB,WAAO;AAAA,MACL,wBAAwB;AAAA,MACxB,UAAU,IAAI;AAAA,IAChB;AAAA,EACF;AACA,QAAM,IAAI,MAAM,6BAA6B,GAAU,EAAE;AAC3D;AAEO,IAAM,yCAAyC,CACpD,QAC2B;AAC3B,MAAI,eAAe,KAAK;AACtB,WAAO;AAAA,MACL,wBAAwB;AAAA,MACxB,UAAU,IAAI,YAAY;AAAA;AAAA,IAC5B;AAAA,EACF;AACA,QAAM,IAAI,MAAM,0BAA0B,GAAU,EAAE;AACxD;AAEO,IAAM,qCAAqC,CAChD,QAC2B;AAC3B,MAAI,eAAe,KAAK;AACtB,WAAO;AAAA,MACL,wBAAwB;AAAA,MACxB,UAAU,IAAI,YAAY;AAAA;AAAA,IAC5B;AAAA,EACF;AACA,QAAM,IAAI,MAAM,0BAA0B,GAAU,EAAE;AACxD;AAEO,IAAM,sCAAsC,CACjD,QAC2B;AAC3B,MAAI,IAAI,UAAU,QAAQ;AACxB,WAAO;AAAA,MACL,wBAAwB;AAAA,MACxB,QAAQ,IAAI;AAAA,MACZ,QAAQ,IAAI;AAAA,IACd;AAAA,EACF;AACA,MAAI,IAAI,UAAU,gBAAgB;AAEhC,WAAO;AAAA,MACL,wBAAwB;AAAA,MACxB,QAAQ,IAAI;AAAA,MACZ,QAAQ,IAAI;AAAA,IACd;AAAA,EACF;AACA,MAAI,IAAI,UAAU,UAAU;AAC1B,WAAO;AAAA,MACL,wBAAwB;AAAA,MACxB,UAAU,IAAI,SAAS;AAAA,IACzB;AAAA,EACF;AACA,MAAI,IAAI,UAAU,QAAQ;AACxB,QAAI,EAAE,WAAW,OAAO,YAAY,MAAM;AACxC,YAAM,IAAI;AAAA,QACR;AAAA,MACF;AAAA,IACF;AACA,QAAI,IAAI,SAAS,IAAI,QAAQ;AAC3B,aAAO;AAAA,QACL,YAAY;AAAA,QACZ,QAAQ,IAAI;AAAA,QACZ,QAAQ,IAAI;AAAA,QACZ,iBAAiB,KAAK,IAAI,IAAI,OAAO,IAAI,MAAM;AAAA,QAC/C,sBAAsB,IAAI,QAAQ;AAAA,MACpC;AAAA,IACF;AACA,WAAO;AAAA,MACL,YAAY;AAAA,MACZ,QAAQ,IAAI;AAAA,MACZ,QAAQ,IAAI;AAAA,MACZ,iBAAiB,KAAK,IAAI,IAAI,OAAO,IAAI,MAAM;AAAA,MAC/C,sBAAsB,IAAI,SAAS;AAAA,IACrC;AAAA,EACF;AACA,QAAM,IAAI,MAAM,qBAAsB,IAAY,KAAK,EAAE;AAC3D;AAEO,IAAM,qCAAqC,CAChD,QAC2B;AAC3B,MAAI,IAAI,UAAU,UAAU;AAC1B,QAAI,EAAE,oBAAoB,OAAO,mBAAmB,MAAM;AACxD,YAAM,IAAI;AAAA,QACR;AAAA,MACF;AAAA,IACF;AACA,WAAO;AAAA,MACL,wBAAwB;AAAA,MACxB,UAAU,IAAI;AAAA,IAChB;AAAA,EACF;AACA,MAAI,IAAI,UAAU,QAAQ;AACxB,QAAI,EAAE,iBAAiB,OAAO,kBAAkB,MAAM;AACpD,YAAM,IAAI;AAAA,QACR;AAAA,MACF;AAAA,IACF;AAEA,QAAI,IAAI,cAAc,IAAI,cAAc;AACtC,aAAO;AAAA,QACL,YAAY;AAAA,QACZ,QAAQ,IAAI;AAAA,QACZ,QAAQ,IAAI;AAAA,QACZ,iBAAiB,KAAK,IAAI,IAAI,aAAa,IAAI,YAAY;AAAA,QAC3D,sBAAsB,IAAI,cAAc;AAAA,MAC1C;AAAA,IACF;AACA,WAAO;AAAA,MACL,YAAY;AAAA,MACZ,QAAQ,IAAI;AAAA,MACZ,QAAQ,IAAI;AAAA,MACZ,iBAAiB,KAAK,IAAI,IAAI,aAAa,IAAI,YAAY;AAAA,MAC3D,sBAAsB,IAAI,eAAe;AAAA,IAC3C;AAAA,EACF;AACA,QAAM,QAAQ,IAAI;AAClB,MACE,UAAU,iCACV,UAAU,6BACV,UAAU,mCACV;AACA,QAAI,EAAE,oBAAoB,OAAO,qBAAqB,MAAM;AAC1D,YAAM,IAAI;AAAA,QACR,WAAW,KAAK;AAAA,MAClB;AAAA,IACF;AACA,WAAO;AAAA,MACL,wBAAwB;AAAA,MACxB,QAAQ,IAAI;AAAA,MACZ,QAAQ,IAAI;AAAA,IACd;AAAA,EACF;AACA,QAAM,IAAI;AAAA,IACR,4DAA4D,IAAI,KAAK;AAAA,EACvE;AACF;AAEO,IAAM,qCAAqC,CAChD,QAC2B;AAC3B,MAAI,EAAE,mBAAmB,MAAM;AAC7B,UAAM,IAAI;AAAA,MACR,+DAA+D,IAAI,UAAU;AAAA,IAC/E;AAAA,EACF;AACA,SAAO;AAAA,IACL,wBAAwB;AAAA,IACxB,UAAU,IAAI;AAAA,EAChB;AACF;AAEO,IAAM,qCAAqC,CAAC,QAErB;AAC5B,MAAI,OAAO,IAAI,mBAAmB,UAAU;AAC1C,UAAM,IAAI;AAAA,MACR;AAAA,IACF;AAAA,EACF;AACA,SAAO;AAAA,IACL,wBAAwB;AAAA,IACxB,UAAU,IAAI;AAAA,EAChB;AACF;AAEA,SAAS,sCAAsC;AAAA,EAC7C;AAAA,EACA;AAAA,EACA;AACF,GAI6B;AAC3B,QAAM,UAAoC,CAAC;AAC3C,QAAM,gBAAgB,oBAAI,IAAY;AACtC,QAAM,oBAAoB,YAAY,SAAS,OAAO;AAEtD,QAAM,iBAAiB,CAAC,WAAmC;AACzD,UAAM,OAAO,gBAAgB,MAAM;AACnC,QAAI,CAAC,cAAc,IAAI,IAAI,GAAG;AAC5B,cAAQ,KAAK,MAAM;AACnB,oBAAc,IAAI,IAAI;AAAA,IACxB;AAAA,EACF;AAEA,aAAW,OAAO,aAAa;AAC7B,QAAI,IAAI,SAAS,cAAc;AAC7B,UAAI,IAAI,UAAU,SAAS,IAAI,UAAU,WAAW;AAClD,YAAI,mBAAmB;AACrB,yBAAe,yCAAyC,GAAG,CAAC;AAAA,QAC9D,OAAO;AACL,yBAAe,+BAA+B,GAAG,CAAC;AAAA,QACpD;AAAA,MACF;AAAA,IACF,WAAW,IAAI,SAAS,oBAAoB;AAC1C,UAAI,IAAI,UAAU,OAAO;AACvB,uBAAe,oCAAoC,GAAG,CAAC;AACvD,YAAI,IAAI,UAAU,QAAQ;AACxB;AAAA,YACE,oCAAoC;AAAA,cAClC,GAAG;AAAA,cACH,OAAO,IAAI;AAAA,cACX,QAAQ,IAAI;AAAA,YACd,CAAC;AAAA,UACH;AAAA,QACF;AAAA,MACF;AAAA,IACF,WAAW,IAAI,SAAS,mBAAmB;AACzC,UAAI,IAAI,OAAO,SAAS,KAAK,GAAG;AAC9B,YACE,YAAY,SAAS,OAAO,KAC5B,IAAI,gCAAgC,MACpC;AACA;AAAA,QACF;AACA,uBAAe,mCAAmC,GAAG,CAAC;AAAA,MACxD;AAAA,IACF,WAAW,IAAI,SAAS,YAAY;AAClC,UACE,YAAY,SAAS,OAAO,KAC5B,IAAI,gCAAgC,MACpC;AACA;AAAA,MACF;AACA,UAAI,IAAI,eAAe;AACrB,uBAAe,mCAAmC,GAAG,CAAC;AAAA,UACnD,SAAQ,KAAK,sDAAsD;AAAA,IAC1E,WAAW,IAAI,SAAS,WAAW;AACjC,qBAAe,mCAAmC,GAAG,CAAC;AAAA,IACxD,WAAW,IAAI,SAAS,aAAa;AACnC,iBAAW,SAAS,IAAI,OAAO;AAC7B,YACE,MAAM,eAAe,SACrB,OAAO,MAAM,mBAAmB,aAC/B,MAAM,eAAe,SAAS,MAAM,aAAa,QAClD;AACA,yBAAe,mCAAmC,KAAK,CAAC;AAAA,QAC1D;AAAA,MACF;AAAA,IACF,WAAW,IAAI,SAAS;AACtB,qBAAe,uCAAuC,GAAG,CAAC;AAAA,aACnD,IAAI,SAAS;AACpB,qBAAe,uCAAuC,GAAG,CAAC;AAAA,aACnD,IAAI,SAAS,mBAAmB;AACvC,UAAI,IAAI,UAAU;AAChB,uBAAe,mCAAmC,GAAG,CAAC;AAAA,IAC1D;AAAA,EACF;AAEA,SAAO;AACT;;;AEnaO,IAAM,qBAAqB,CAChC,QACA,kBAKW;AACX,MAAI;AACJ,MAAI,iBAAiB,eAAe;AAClC,UAAM,cAAc,cAAc;AAClC,eAAW,OAAO;AAAA,MAChB,CAAC,YACC,4BAA4B,WAC5B,QAAQ,iBAAiB,SACzB,QAAQ,2BAA2B,OACnC,QAAQ,aAAa;AAAA,IACzB;AAAA,EACF,WACE,4BAA4B,iBAC5B,gBAAgB,eAChB;AACA,eAAW,OAAO;AAAA,MAChB,CAAC,YACC,QAAQ,iBAAiB,SACzB,OAAO,KAAK,aAAa,EAAE;AAAA,QACzB,CAAC,eACC,QAAQ,UAAwC,MAChD,cAAc,UAAwC;AAAA,MAC1D;AAAA,IACJ;AAAA,EACF;AAEA,MAAI,CAAC,UAAU;AAEb,UAAM,IAAI;AAAA,MACR,wCAAwC,KAAK,UAAU,aAAa,CAAC;AAAA,IACvE;AAAA,EACF;AACA,SAAO,SAAS;AAClB;;;AC9CA;AAAA,EACE,MAAQ;AAAA,EACR,SAAW;AAAA,EACX,MAAQ;AAAA,EACR,MAAQ;AAAA,EACR,SAAW;AAAA,IACT,OAAS;AAAA,IACT,QAAU;AAAA,IACV,gBAAgB;AAAA,IAChB,OAAS;AAAA,IACT,cAAc;AAAA,EAChB;AAAA,EACA,OAAS;AAAA,IACP;AAAA,EACF;AAAA,EACA,KAAO;AAAA,IACL,qBAAqB;AAAA,EACvB;AAAA,EACA,iBAAmB;AAAA,IACjB,kBAAkB;AAAA,IAClB,mBAAmB;AAAA,IACnB,cAAc;AAAA,IACd,eAAe;AAAA,IACf,gBAAgB;AAAA,IAChB,oBAAoB;AAAA,IACpB,UAAY;AAAA,IACZ,iBAAiB;AAAA,IACjB,gBAAgB;AAAA,IAChB,WAAa;AAAA,IACb,iBAAiB;AAAA,IACjB,UAAY;AAAA,IACZ,OAAS;AAAA,IACT,eAAe;AAAA,IACf,OAAS;AAAA,IACT,aAAa;AAAA,IACb,WAAa;AAAA,IACb,MAAQ;AAAA,EACV;AAAA,EACA,kBAAoB;AAAA,IAClB,YAAc;AAAA,IACd,WAAa;AAAA,IACb,gBAAgB;AAAA,EAClB;AAAA,EACA,cAAgB;AAAA,IACd,uBAAuB;AAAA,IACvB,8BAA8B;AAAA,IAC9B,yBAAyB;AAAA,EAC3B;AACF;;;AC3CA,IAAM,6BAA6B;AAAA,EACjC,cAAc;AAAA,EACd,kBAAkB;AAAA,EAClB,qBAAqB;AAAA,EACrB,kBAAkB;AAAA,EAClB,qBAAqB;AAAA,EACrB,aAAa;AAAA,EACb,gBAAgB;AAAA,EAChB,SAAS;AACX;AAEA,IAAM,uBAAuB,CAAC,OAAiB,sBAA8B;AAC3E,MAAI,UAAU,MAAO,QAAO;AAC5B,MAAI,UAAU,SAAU,QAAO;AAC/B,SAAO,OAAO,MAAM,QAAQ,SAAS,EAAE,CAAC,IAAI;AAC9C;AAiBO,IAAM,oBAAoB,CAAC,SAIR;AACxB,QAAM,oBAAoB,KAAK,qBAAqB;AACpD,MAAI;AACJ,MAAI,KAAK,eAAe,YAAY,KAAK,UAAU,WAAW;AAC5D,UAAM,cAAc,qBAAqB,KAAK,OAAO,iBAAiB;AACtE,UAAM,gBACJ,KAAK,UAAU,QAAQ,QAAQ,KAAK,UAAU,WAAW,QAAQ;AACnE,oBAAgB,WAAW,WAAW,IAAI,aAAa;AAAA,EACzD,OAAO;AACL,oBACE,2BACG,KAAK,aACF,GAAG,KAAK,KAAK,IAAI,KAAK,UAAU,KAChC,KAAK,KACX;AAAA,EACJ;AACA,SACE,cAAc,EACX,IAAI,yBAAyB;AAAA,IAC5B,gBAAgB;AAAA,IAChB,iBAAiB,oCAAoC,gBAAY,OAAO;AAAA,EAC1E,CAAC,EACA,IAAI,yBAAyB;AAAA,IAC5B,gBAAgB;AAAA,IAChB,kBAAiB,oBAAI,KAAK,GAAE,YAAY;AAAA,EAC1C,CAAC,EAKA,IAAI,yBAAyB;AAAA,IAC5B,gBAAgB;AAAA,IAChB,iBAAiB;AAAA,EACnB,CAAC,EACA,IAAI,yBAAyB;AAAA,IAC5B,gBAAgB;AAAA,IAChB,iBAAiB;AAAA,EACnB,CAAC,EACA;AAAA,IAAI,KAAK,UAAU;AAAA,IAAW,CAAC,OAC9B,GAAG,IAAI,yBAAyB;AAAA,MAC9B,gBAAgB;AAAA,MAChB,iBACE,KAAK,eAAe,eAAe,aAAa;AAAA,IACpD,CAAC;AAAA,EACH,EACC,IAAI,wBAAwB,CAAC,CAAC,EAC9B,IAAI,YAAY;AAAA,IACf,MAAM;AAAA,EACR,CAAC,EACA,IAAI,WAAW;AAAA,IACd,SAAS;AAAA,EACX,CAAC,EACA,IAAI,WAAW;AAAA,IACd,SAAS,wCAAuC,oBAAI,KAAK,GAAE,YAAY,CAAC;AAAA,EAC1E,CAAC,EACA,IAAI,+BAA+B,CAAC,CAAC,EACrC,IAAI,sBAAsB;AAAA,IACzB,UAAU;AAAA,EACZ,CAAC,EACA,IAAI,cAAc,CAAC,CAAC,EACpB,MAAM;AAEb;;;ACpGA,IAAM,yBAAyB;AAAA,EAC7B,KAAK;AAAA,EACL,QAAQ;AAAA,EACR,QAAQ;AAAA,EACR,QAAQ;AAAA,EACR,QAAQ;AAAA,EACR,QAAQ;AAAA,EACR,QAAQ;AAAA,EACR,QAAQ;AACV;AACA,IAAM,0BAA0B;AAAA,EAC9B,QAAQ;AAAA,EACR,YAAY;AAAA,EACZ,YAAY;AAAA,EACZ,MAAM;AAAA,EACN,OAAO;AACT;AAEO,IAAM,qBAAqB,CAChC,WACA,eACoB;AACpB,MAAI,cAAc,UAAW,QAAO;AACpC,MAAI,UAAU,WAAW,OAAO,KAAK,eAAe,UAAU;AAC5D,UAAM,IAAI,MAAM,eAAe,SAAS,+BAA+B;AAAA,EACzE;AACA,SAAO,GAAG,uBAAuB,SAAgD,CAAC,GAAG,wBAAwB,UAAU,CAAC;AAC1H;;;ACTA,SAAS,oBAAoB;AAC7B;AAAA,EACE;AAAA,EACA;AAAA,EACA;AAAA,EACA;AAAA,EACA;AAAA,OAEK;AAIP,IAAMC,iBAAgB,CAAC,gBAAqC;AAC1D,QAAM,QAAQ,YAAY,KAAK,CAAC,YAAY,QAAQ,SAAS,WAAW;AAGxE,QAAM,YAAY,OAAO,cAAc;AACvC,SAAO,KAAK,IAAI,GAAG,KAAK,IAAI,GAAG,SAAS,CAAC;AAC3C;AAEA,IAAM,oBAAoB,CAAC,eACzB,MAAM,KAAK,EAAE,QAAQ,aAAa,EAAE,GAAG,CAAC,GAAG,MAAM,QAAQ,IAAI,CAAC,EAAc;AAE9E,IAAM,0BAA0B,CAAC,aAAuB;AACtD,MAAI,CAAC,SAAS,WAAW,OAAO,GAAG;AACjC,UAAM,IAAI,MAAM,6BAA6B,QAAQ,EAAE;AAAA,EACzD;AACA,SAAO,KAAK,SAAS,QAAQ,SAAS,EAAE,CAAC;AAC3C;AAKO,IAAM,8BAA8B,CACzC,aACA,OAAkC,CAAC,MACN;AAC7B,OAAK,gBAAgB;AACrB,QAAM,WAAW,YAAY,KAAK,CAAC,MAAM,EAAE,SAAS,WAAW;AAC/D,QAAM,aAAaA,eAAc,WAAW;AAC5C,QAAM,iBAAiB,kBAAkB,UAAU;AACnD,QAAM,kBAAkB,CAAC,OAAO,GAAG,gBAAgB,QAAQ;AAC3D,QAAM,iBAAiB,CAAC,OAAO,QAAQ;AACvC,QAAM,UAAoC;AAAA,IACxC,MAAM,kBAAkB;AAAA,MACtB,OAAO;AAAA,MACP,YAAY;AAAA,MACZ,mBAAmB;AAAA,IACrB,CAAC;AAAA,IACD,cAAc,kBAAkB;AAAA,MAC9B,OAAO;AAAA,MACP,YAAY;AAAA,IACd,CAAC;AAAA,IACD,QAAQ,kBAAkB;AAAA,MACxB,OAAO;AAAA,MACP,YAAY;AAAA,IACd,CAAC;AAAA,IACD,SAAS,kBAAkB;AAAA,MACzB,OAAO;AAAA,MACP,YAAY;AAAA,IACd,CAAC;AAAA,IACD,MAAM,kBAAkB;AAAA,MACtB,OAAO;AAAA,MACP,YAAY;AAAA,MACZ,mBAAmB;AAAA,IACrB,CAAC;AAAA,IACD,cAAc,kBAAkB;AAAA,MAC9B,OAAO;AAAA,MACP,YAAY;AAAA,IACd,CAAC;AAAA,IACD,QAAQ,kBAAkB;AAAA,MACxB,OAAO;AAAA,MACP,YAAY;AAAA,IACd,CAAC;AAAA,IACD,SAAS,kBAAkB;AAAA,MACzB,OAAO;AAAA,MACP,YAAY;AAAA,IACd,CAAC;AAAA,IACD,WAAW,kBAAkB;AAAA,MAC3B,OAAO;AAAA,IACT,CAAC;AAAA,EACH;AAEA,aAAW,iBAAiB,gBAAgB;AAC1C,YAAQ,wBAAwB,aAAa,CAAC,IAAI,kBAAkB;AAAA,MAClE,OAAO;AAAA,MACP,YAAY;AAAA,MACZ,mBAAmB;AAAA,IACrB,CAAC;AAAA,EACH;AAEA,QAAM,yBAAyB,gBAAgB;AAAA,IAAI,CAAC,aAClD,mBAAmB,UAAU,QAAQ;AAAA,EACvC;AACA,QAAM,wBAAwB,eAAe,QAAQ,CAAC,aAAa;AAAA,IACjE,mBAAmB,UAAU,YAAY;AAAA,IACzC,mBAAmB,UAAU,OAAO;AAAA,IACpC,mBAAmB,UAAU,YAAY;AAAA,EAC3C,CAAC;AAED,aAAW,eAAe;AAAA,IACxB;AAAA,IACA,GAAG,uBAAuB,OAAO,CAAC,SAAS,SAAS,MAAM;AAAA,IAC1D,GAAG;AAAA,EACL,GAAY;AACV,UAAM,SAAS,QAAQ,WAAW;AAClC,uBAAmB,MAAM;AACzB,4BAAwB;AAAA,MACtB;AAAA,MACA;AAAA,MACA;AAAA,IACF,CAAC;AAAA,EACH;AAGA,UAAQ,UAAU;AAAA,IAChB,GAAG,cAAc,EACd,IAAI,4BAA4B;AAAA,MAC/B,iBAAiB;AAAA,MACjB,wBAAwB;AAAA,MACxB,UAAU;AAAA;AAAA,IACZ,CAAC,EACA,MAAM;AAAA,EACX;AAKA,QAAM,MAAM,CAAC,MAAe,KAAK,cAAc,CAAC,IAAI;AAEpD,QAAM,mBAAmB,CACvB,SACA,OACA,WACA,sBACG;AACH,QAAI,QAAQ,UAAU,MAAO;AAG7B,UAAM,mBAAmB;AACzB,UAAM,SAAS,QAAQ,mBAAmB,OAAO,SAAS,CAAC;AAC3D,UAAM,iBAAiB,kBAAkB,OAAO;AAChD,UAAM,SAAS,cAAc,EAAE,IAAI,mBAAmB;AAAA,MACpD,iBAAiB,mBAAmB,QAAQ,cAAc;AAAA,IAC5D,CAAC;AAED,QAAI,WAAW,QAAQ,gBAAgB;AACvC,QAAI,WAAW,QAAQ,gBAAgB;AACvC,UAAM,WAAW,QAAQ,YAAY;AACrC,UAAM,gBAAgB,WAAW;AACjC,UAAM,aAAa,WAAW;AAE9B,UAAM,YACJ,QAAQ,KAAK,MAAM,EAAE,EAAE,OAAO,CAAC,OAAe,SAAiB;AAC7D,UAAI,SAAS,KAAK;AAChB,eAAO,QAAQ,aAAa;AAAA,MAC9B;AACA,aAAO,QAAQ,WAAW;AAAA,IAC5B,GAAG,CAAC,IAAI;AAEV,UAAM,aAAa;AAEnB,UAAM,kBACJ,QAAQ,qBACP,MAKgB;AACf,YAAM,OAAO,QAAQ;AAMrB,UAAI,CAAC,KAAM,QAAO;AAClB,cAAQ,MAAM;AAAA,QACZ,KAAK;AACH,iBAAO;AAAA,QACT,KAAK;AACH,iBAAO;AAAA,QACT,KAAK;AACH,iBAAO;AAAA,QACT,KAAK;AACH,iBAAO;AAAA,MACX;AAAA,IACF,GAAG,KACH;AAEF,YAAQ,iBAAiB;AAAA,MACvB,KAAK;AACH;AAAA,MACF,KAAK;AACH,oBAAY,YAAY;AACxB;AAAA,MACF,KAAK;AACH,oBAAY;AACZ;AAAA,MACF,KAAK;AACH,oBAAY,aAAa;AACzB;AAAA,MACF,KAAK;AACH,oBAAY;AACZ,oBAAY,aAAa;AACzB;AAAA,MACF,KAAK;AACH,oBAAY;AACZ;AAAA,MACF,KAAK;AACH,oBAAY,YAAY;AACxB,oBAAY;AACZ;AAAA,MACF,KAAK;AACH,oBAAY;AACZ,oBAAY;AACZ;AAAA,MACF;AACE,oBAAY,YAAY;AACxB,oBAAY,aAAa;AACzB;AAAA,IACJ;AAEA,QAAI,YAAY;AAChB,UAAM,YAAY;AAElB,QAAI,WAAW,QAAQ,gBAAgB;AACvC,UAAM,KAAK,YAAY,YAAY;AACnC,UAAM,KAAK,YAAY,aAAa;AACpC,UAAM,aAAuB,CAAC;AAE9B,UAAM,eACJ,QAAQ,gBAAgB,SACpB,QAAQ,cACR,QAAQ,UAAU;AAExB,QAAI,cAAc;AAChB,iBAAW;AAAA,QACT,UAAU,IAAI,EAAE;AAAA,QAChB,EAAE,GAAG,IAAI,GAAG,GAAG,GAAG,GAAG,GAAG,GAAG,GAAG,GAAG,GAAG,EAAE;AAAA,QACtC,UAAU,CAAC,IAAI,CAAC,EAAE;AAAA,MACpB;AACA,iBAAW,CAAC;AAAA,IACd;AAEA,QAAI,UAAU;AACZ,YAAM,MAAO,WAAW,KAAK,KAAM;AACnC,iBAAW,KAAK,UAAU,IAAI,EAAE,GAAG,OAAO,GAAG,GAAG,UAAU,CAAC,IAAI,CAAC,EAAE,CAAC;AAAA,IACrE;AAEA,UAAM,kBACJ,WAAW,SAAS,IAAI,QAAQ,GAAG,UAAU,IAAI;AAEnD,UAAM,iBAAiB,CAAC,UACtB,kBAAkB,aAAa,iBAAiB,KAAK,IAAI;AAE3D,QAAI,cAAc,YAAY,QAAQ,aAAa;AACjD,YAAM,UAAU,QAAQ,oBAAoB;AAAA,QAC1C,MAAM;AAAA,QACN,OAAO;AAAA,QACP,KAAK;AAAA,QACL,QAAQ;AAAA,MACV;AAEA,YAAM,aAAa;AAAA,QACjB,EAAE,GAAG,WAAW,QAAQ,MAAM,GAAG,WAAW,QAAQ,IAAI;AAAA,QACxD;AAAA,UACE,GAAG,WAAW,YAAY,QAAQ;AAAA,UAClC,GAAG,WAAW,QAAQ;AAAA,QACxB;AAAA,QACA;AAAA,UACE,GAAG,WAAW,YAAY,QAAQ;AAAA,UAClC,GAAG,WAAW,aAAa,QAAQ;AAAA,QACrC;AAAA,QACA;AAAA,UACE,GAAG,WAAW,QAAQ;AAAA,UACtB,GAAG,WAAW,aAAa,QAAQ;AAAA,QACrC;AAAA,MACF,EAAE,IAAI,cAAc;AAEpB,aAAO;AAAA,QACL,GAAG,cAAc,EACd,IAAI,mBAAmB;AAAA,UACtB,iBAAiB,mBAAmB,QAAQ,cAAc;AAAA,QAC5D,CAAC,EACA,IAAI,0BAA0B,CAAC,CAAC,EAChC,IAAI,kBAAkB;AAAA,UACrB,GAAG,WAAW,CAAC,EAAE;AAAA,UACjB,GAAG,IAAI,WAAW,CAAC,EAAE,CAAC;AAAA,QACxB,CAAC,EACA,IAAI,kBAAkB;AAAA,UACrB,GAAG,WAAW,CAAC,EAAE;AAAA,UACjB,GAAG,IAAI,WAAW,CAAC,EAAE,CAAC;AAAA,QACxB,CAAC,EACA,IAAI,kBAAkB;AAAA,UACrB,GAAG,WAAW,CAAC,EAAE;AAAA,UACjB,GAAG,IAAI,WAAW,CAAC,EAAE,CAAC;AAAA,QACxB,CAAC,EACA,IAAI,kBAAkB;AAAA,UACrB,GAAG,WAAW,CAAC,EAAE;AAAA,UACjB,GAAG,IAAI,WAAW,CAAC,EAAE,CAAC;AAAA,QACxB,CAAC,EACA,IAAI,kBAAkB;AAAA,UACrB,GAAG,WAAW,CAAC,EAAE;AAAA,UACjB,GAAG,IAAI,WAAW,CAAC,EAAE,CAAC;AAAA,QACxB,CAAC,EACA,IAAI,wBAAwB,CAAC,CAAC,EAC9B,MAAM;AAAA,MACX;AAEA,aAAO;AAAA,QACL,GAAG,cAAc,EAAE,IAAI,sBAAsB,EAAE,UAAU,IAAI,CAAC,EAAE,MAAM;AAAA,MACxE;AAAA,IACF;AAEA,eAAW,QAAQ,QAAQ,KAAK,YAAY,GAAG;AAC7C,UAAI,SAAS,KAAK;AAChB,qBAAa,aAAa;AAC1B;AAAA,MACF;AAEA,YAAM,cAAc,aAAa,IAAI,KAAK,CAAC;AAC3C,iBAAW,QAAQ,aAAa;AAC9B,cAAM,KAAK,YAAY,KAAK,KAAK;AACjC,cAAM,KAAK,YAAY,KAAK,KAAK;AACjC,cAAM,KAAK,YAAY,KAAK,KAAK;AACjC,cAAM,KAAK,YAAY,KAAK,KAAK;AAEjC,cAAM,KAAK,eAAe,EAAE,GAAG,IAAI,GAAG,GAAG,CAAC;AAC1C,cAAM,KAAK,eAAe,EAAE,GAAG,IAAI,GAAG,GAAG,CAAC;AAE1C,eAAO,IAAI,kBAAkB,EAAE,GAAG,GAAG,GAAG,GAAG,IAAI,GAAG,CAAC,EAAE,CAAC;AACtD,eAAO,IAAI,kBAAkB,EAAE,GAAG,GAAG,GAAG,GAAG,IAAI,GAAG,CAAC,EAAE,CAAC;AAAA,MACxD;AAEA,mBAAa,WAAW;AAAA,IAC1B;AAEA,WAAO,KAAK,GAAG,OAAO,MAAM,CAAC;AAE7B,QAAI,cAAc,YAAY,QAAQ,aAAa;AACjD,aAAO;AAAA,QACL,GAAG,cAAc,EAAE,IAAI,sBAAsB,EAAE,UAAU,IAAI,CAAC,EAAE,MAAM;AAAA,MACxE;AAAA,IACF;AAAA,EACF;AAGA,QAAM,oBAAoB,CACxB,SACA,SAGG;AACH,QAAI,CAAC,QAAQ,KAAK,SAAS,WAAW,EAAG;AAEzC,YAAQ,IAAI,kBAAkB;AAAA,MAC5B,GAAG,KAAK,SAAS,CAAC,EAAE;AAAA,MACpB,GAAG,IAAI,KAAK,SAAS,CAAC,EAAE,CAAC;AAAA,IAC3B,CAAC;AAED,UAAM,gBAAgB,CAAC,GAAG,KAAK,UAAU,KAAK,SAAS,CAAC,CAAC;AAEzD,aAAS,IAAI,GAAG,IAAI,cAAc,SAAS,GAAG,KAAK;AACjD,YAAM,QAAQ,cAAc,CAAC;AAC7B,YAAM,MAAM,cAAc,IAAI,CAAC;AAE/B,UAAI,MAAM,SAAS,KAAK,IAAI,MAAM,KAAK,IAAI,MAAM;AAC/C,cAAM,SAAS,KAAK,cAAc,KAAK,KAAM,MAAM;AACnD,YAAI,QAAQ,GAAG;AAEb,kBAAQ,IAAI,kDAAkD,CAAC,CAAC;AAAA,QAClE,OAAO;AAEL,kBAAQ,IAAI,2CAA2C,CAAC,CAAC;AAAA,QAC3D;AAEA,cAAM,KAAK,EAAE,GAAG,MAAM,GAAG,GAAG,MAAM,EAAE;AACpC,cAAM,KAAK,EAAE,GAAG,IAAI,GAAG,GAAG,IAAI,EAAE;AAEhC,cAAM,KAAK,GAAG,IAAI,GAAG;AACrB,cAAM,KAAK,GAAG,IAAI,GAAG;AACrB,cAAM,IAAI,KAAK,KAAK,KAAK,KAAK,KAAK,EAAE;AAErC,YAAI,IAAI,MAAM;AACZ,kBAAQ,IAAI,+BAA+B,CAAC,CAAC;AAC7C,kBAAQ,IAAI,kBAAkB;AAAA,YAC5B,GAAG,IAAI;AAAA,YACP,GAAG,IAAI,IAAI,CAAC;AAAA,UACd,CAAC;AACD;AAAA,QACF;AAEA,cAAM,QAAQ,KAAK,IAAI,KAAK;AAC5B,cAAM,QAAQ,IAAI,KAAK,KAAK,KAAK;AACjC,YAAI,KAAK,IAAI,KAAK,IAAI,QAAQ,CAAC,CAAC,IAAI,MAAM;AACxC,kBAAQ,IAAI,+BAA+B,CAAC,CAAC;AAC7C,kBAAQ,IAAI,kBAAkB;AAAA,YAC5B,GAAG,IAAI;AAAA,YACP,GAAG,IAAI,IAAI,CAAC;AAAA,UACd,CAAC;AACD;AAAA,QACF;AACA,cAAM,IAAI,KAAK,IAAI,KAAK,IAAI,QAAQ,CAAC;AACrC,cAAM,SAAS,KAAK,KAAK,SAAS;AAClC,cAAM,MAAM,KAAK,MAAM,IAAI,EAAE;AAC7B,cAAM,cAAc,QAAQ,IAAI,QAAQ,CAAC;AACzC,cAAM,kBAAkB,MAAM;AAC9B,cAAM,KAAK,GAAG,IAAI,IAAI,KAAK,IAAI,eAAe;AAC9C,cAAM,KAAK,GAAG,IAAI,IAAI,KAAK,IAAI,eAAe;AAE9C,cAAM,WAAW,KAAK,GAAG;AACzB,cAAM,WAAW,KAAK,GAAG;AAEzB,gBAAQ,IAAI,kBAAkB;AAAA,UAC5B,GAAG,IAAI;AAAA,UACP,GAAG,IAAI,IAAI,CAAC;AAAA,UACZ,GAAG;AAAA,UACH,GAAG,KAAK,cAAc,CAAC,WAAW;AAAA,QACpC,CAAC;AAAA,MACH,OAAO;AAEL,gBAAQ,IAAI,+BAA+B,CAAC,CAAC;AAC7C,gBAAQ,IAAI,kBAAkB,EAAE,GAAG,IAAI,GAAG,GAAG,IAAI,IAAI,CAAC,EAAE,CAAC;AAAA,MAC3D;AAAA,IACF;AAAA,EACF;AAIA,QAAM,cAAc,CAAC,SAIhB;AACH,UAAM,EAAE,SAAS,IAAI;AACrB,QAAI,CAAC,YAAY,SAAS,WAAW,EAAG,QAAO,EAAE,UAAU,CAAC,EAAE;AAC9D,UAAM,IAAI,SAAS;AAEnB,UAAM,eAAe,CAAC,GAAG,QAAQ,EAAE,QAAQ;AAE3C,UAAM,eAAe,aAAa,IAAI,CAAC,IAAI,MAAM;AAC/C,YAAM,eAAe,IAAI,IAAI,IAAI,KAAK;AACtC,YAAM,QAAQ,SAAS,WAAW,EAAE;AACpC,aAAO,EAAE,GAAG,IAAI,OAAO,QAAQ,CAAC,QAAQ,OAAU;AAAA,IACpD,CAAC;AAED,WAAO,EAAE,UAAU,aAAa;AAAA,EAClC;AAOA,aAAW,SAAS,iBAAiB;AACnC,eAAW,WAAW,aAAa;AACjC,UAAI,QAAQ,SAAS,qBAAqB,UAAU,QAAQ,OAAO;AACjE,cAAM,gBAAgB,QAAQ,mBAAmB,OAAO,QAAQ,CAAC;AAGjE,cAAM,oBAAwC,CAAC;AAE/C,YAAI,QAAQ,UAAU,QAAQ;AAC5B,gBAAM,EAAE,WAAW,IAAI;AACvB,cAAI,CAAC,WAAY;AACjB,gBAAM,EAAE,YAAY,YAAY,IAAI;AAGpC,gBAAM,gBAAgB,cAAc,EACjC,IAAI,mBAAmB,EAAE,iBAAiB,GAAG,CAAC,EAC9C,IAAI,0BAA0B,CAAC,CAAC;AAEnC,4BAAkB,eAAe,YAAY,UAAU,CAAC;AAExD,wBAAc,IAAI,wBAAwB,CAAC,CAAC;AAC5C,4BAAkB,KAAK,GAAG,cAAc,MAAM,CAAC;AAI/C,cAAI,eAAe,YAAY,SAAS,GAAG;AAEzC,8BAAkB;AAAA,cAChB,GAAG,cAAc,EACd,IAAI,sBAAsB,EAAE,UAAU,IAAI,CAAC,EAC3C,MAAM;AAAA,YACX;AAEA,uBAAW,cAAc,aAAa;AACpC,oBAAM,gBAAgB,cAAc,EACjC,IAAI,mBAAmB,EAAE,iBAAiB,GAAG,CAAC,EAC9C,IAAI,0BAA0B,CAAC,CAAC;AAInC,gCAAkB,eAAe,UAAU;AAE3C,4BAAc,IAAI,wBAAwB,CAAC,CAAC;AAC5C,gCAAkB,KAAK,GAAG,cAAc,MAAM,CAAC;AAAA,YACjD;AAGA,8BAAkB;AAAA,cAChB,GAAG,cAAc,EACd,IAAI,sBAAsB,EAAE,UAAU,IAAI,CAAC,EAC3C,MAAM;AAAA,YACX;AAAA,UACF;AAAA,QACF,WAAW,QAAQ,UAAU,QAAQ;AACnC,gBAAM,EAAE,QAAQ,OAAO,QAAQ,SAAS,IAAI;AAC5C,gBAAM,IAAK,QAAmB;AAC9B,gBAAM,IAAK,SAAoB;AAE/B,gBAAM,SAAS;AAAA,YACb,EAAE,GAAG,CAAC,GAAG,GAAG,EAAE;AAAA;AAAA,YACd,EAAE,GAAG,GAAG,GAAG,EAAE;AAAA;AAAA,YACb,EAAE,GAAG,GAAG,GAAG,CAAC,EAAE;AAAA;AAAA,YACd,EAAE,GAAG,CAAC,GAAG,GAAG,CAAC,EAAE;AAAA;AAAA,UACjB;AAEA,cAAI,kBAAkB,SAAS;AAC/B,cAAI,UAAU;AACZ,kBAAM,YAAc,WAAsB,KAAK,KAAM;AACrD,8BAAkB,OAAO,SAAS;AAAA,UACpC;AACA,4BAAkB;AAAA,YAChB,UAAU,OAAO,GAAG,OAAO,CAAC;AAAA,YAC5B;AAAA,UACF;AAEA,gBAAM,oBAAoB,OAAO;AAAA,YAAI,CAAC,MACpC,aAAa,iBAAiB,CAAC;AAAA,UACjC;AAEA,gBAAM,eAAe,cAAc,EAChC,IAAI,mBAAmB,EAAE,iBAAiB,GAAG,CAAC,EAC9C,IAAI,0BAA0B,CAAC,CAAC;AAEnC,uBAAa,IAAI,kBAAkB;AAAA,YACjC,GAAG,kBAAkB,CAAC,EAAE;AAAA,YACxB,GAAG,IAAI,kBAAkB,CAAC,EAAE,CAAC;AAAA,UAC/B,CAAC;AACD,mBAAS,IAAI,GAAG,IAAI,kBAAkB,QAAQ,KAAK;AACjD,yBAAa,IAAI,kBAAkB;AAAA,cACjC,GAAG,kBAAkB,CAAC,EAAE;AAAA,cACxB,GAAG,IAAI,kBAAkB,CAAC,EAAE,CAAC;AAAA,YAC/B,CAAC;AAAA,UACH;AACA,uBAAa,IAAI,kBAAkB;AAAA,YACjC,GAAG,kBAAkB,CAAC,EAAE;AAAA,YACxB,GAAG,IAAI,kBAAkB,CAAC,EAAE,CAAC;AAAA,UAC/B,CAAC;AAED,uBAAa,IAAI,wBAAwB,CAAC,CAAC;AAC3C,4BAAkB,KAAK,GAAG,aAAa,MAAM,CAAC;AAAA,QAChD,WAAW,QAAQ,UAAU,WAAW;AACtC,gBAAM,EAAE,OAAO,IAAI;AACnB,cAAI,OAAO,SAAS,GAAG;AACrB,kBAAM,eAAe,cAAc,EAChC,IAAI,mBAAmB,EAAE,iBAAiB,GAAG,CAAC,EAC9C,IAAI,0BAA0B,CAAC,CAAC;AAEnC,yBAAa,IAAI,kBAAkB;AAAA,cACjC,GAAG,OAAO,CAAC,EAAE;AAAA,cACb,GAAG,IAAI,OAAO,CAAC,EAAE,CAAC;AAAA,YACpB,CAAC;AACD,qBAAS,IAAI,GAAG,IAAI,OAAO,QAAQ,KAAK;AACtC,2BAAa,IAAI,kBAAkB;AAAA,gBACjC,GAAG,OAAO,CAAC,EAAE;AAAA,gBACb,GAAG,IAAI,OAAO,CAAC,EAAE,CAAC;AAAA,cACpB,CAAC;AAAA,YACH;AACA,yBAAa,IAAI,kBAAkB;AAAA,cACjC,GAAG,OAAO,CAAC,EAAE;AAAA,cACb,GAAG,IAAI,OAAO,CAAC,EAAE,CAAC;AAAA,YACpB,CAAC;AAED,yBAAa,IAAI,wBAAwB,CAAC,CAAC;AAC3C,8BAAkB,KAAK,GAAG,aAAa,MAAM,CAAC;AAAA,UAChD;AAAA,QACF;AAEA,sBAAc,KAAK,GAAG,iBAAiB;AAEvC,YAAI,QAAQ,6BAA6B,OAAO;AAC9C,gBAAM,aAAa,QAAQ,mBAAmB,OAAO,YAAY,CAAC;AAClE,qBAAW,KAAK,GAAG,iBAAiB;AAAA,QACtC;AAAA,MACF;AAAA,IACF;AAAA,EACF;AAGA,aAAW,SAAS,CAAC,GAAG,iBAAiB,SAAS,GAAY;AAC5D,eAAW,WAAW,aAAa;AACjC,UAAI,QAAQ,SAAS,aAAa;AAChC,cAAM,EAAE,MAAM,IAAI;AAClB,mBAAW,CAAC,GAAG,CAAC,KAAK,MAAM,KAAK,GAAG;AAKjC,cAAI,EAAE,eAAe,QAAQ;AAC3B,gBAAI,EAAE,UAAU,OAAO;AACrB,oBAAM,SAAS,QAAQ,mBAAmB,OAAO,QAAQ,CAAC;AAC1D,qBAAO;AAAA,gBACL,GAAG,cAAc,EACd,IAAI,mBAAmB;AAAA,kBACtB,iBAAiB,mBAAmB,QAAQ;AAAA,oBAC1C,aAAa,EAAE;AAAA,kBACjB,CAAC;AAAA,gBACH,CAAC,EACA,IAAI,kBAAkB,EAAE,GAAG,EAAE,GAAG,GAAG,IAAI,EAAE,CAAC,EAAE,CAAC,EAC7C,IAAI,kBAAkB,EAAE,GAAG,EAAE,GAAG,GAAG,IAAI,EAAE,CAAC,EAAE,CAAC,EAC7C,MAAM;AAAA,cACX;AAAA,YACF;AAAA,UACF,WAAW,EAAE,eAAe,SAAS,EAAE,eAAe,QAAQ;AAC5D,gBAAI,EAAE,UAAU,OAAO;AACrB,oBAAM,SAAS,QAAQ,mBAAmB,OAAO,QAAQ,CAAC;AAC1D,qBAAO;AAAA,gBACL,GAAG,cAAc,EACd,IAAI,mBAAmB;AAAA,kBACtB,iBAAiB,mBAAmB,QAAQ;AAAA,oBAC1C,aAAa,EAAE;AAAA,kBACjB,CAAC;AAAA,gBACH,CAAC,EACA,IAAI,kBAAkB,EAAE,GAAG,EAAE,GAAG,GAAG,IAAI,EAAE,CAAC,EAAE,CAAC,EAC7C,IAAI,kBAAkB,EAAE,GAAG,EAAE,GAAG,GAAG,IAAI,EAAE,CAAC,EAAE,CAAC,EAC7C,MAAM;AAAA,cACX;AAAA,YACF;AAAA,UACF;AAAA,QACF;AACA,mBAAW,SAAS,OAAO;AACzB,cACE,MAAM,eAAe,SACrB,OAAO,MAAM,mBAAmB,aAC/B,MAAM,eAAe,SAAS,MAAM,aAAa,QAClD;AACA,kBAAM,SAAS,QAAQ,mBAAmB,OAAO,QAAQ,CAAC;AAC1D,mBAAO;AAAA,cACL,GAAG,cAAc,EACd,IAAI,mBAAmB;AAAA,gBACtB,iBAAiB;AAAA,kBACf;AAAA,kBACA,mCAAmC,KAAK;AAAA,gBAC1C;AAAA,cACF,CAAC,EACA,IAAI,mBAAmB,EAAE,GAAG,MAAM,GAAG,GAAG,IAAI,MAAM,CAAC,EAAE,CAAC,EACtD,MAAM;AAAA,YACX;AAAA,UACF;AAAA,QACF;AAAA,MACF,WACE,QAAQ,SAAS,yBACjB,eAAe,SAAS,KAAY,GACpC;AACA,YAAI,QAAQ,UAAU,OAAO;AAC3B,gBAAM,SAAS,QAAQ,mBAAmB,OAAO,YAAY,CAAC;AAC9D,gBAAM,iBAAiB,uCAAuC,OAAO;AACrE,gBAAM,SAAS,cAAc,EAAE,IAAI,mBAAmB;AAAA,YACpD,iBAAiB,mBAAmB,QAAQ,cAAc;AAAA,UAC5D,CAAC;AAED,cAAI,QAAQ,MAAM,SAAS,GAAG;AAC5B,mBAAO,IAAI,kBAAkB;AAAA,cAC3B,GAAG,QAAQ,MAAM,CAAC,EAAE;AAAA,cACpB,GAAG,IAAI,QAAQ,MAAM,CAAC,EAAE,CAAC;AAAA,YAC3B,CAAC;AAAA,UACH;AAGA,mBAAS,IAAI,GAAG,IAAI,QAAQ,MAAM,QAAQ,KAAK;AAC7C,mBAAO,IAAI,kBAAkB;AAAA,cAC3B,GAAG,QAAQ,MAAM,CAAC,EAAE;AAAA,cACpB,GAAG,IAAI,QAAQ,MAAM,CAAC,EAAE,CAAC;AAAA,YAC3B,CAAC;AAAA,UACH;AAEA,iBAAO,KAAK,GAAG,OAAO,MAAM,CAAC;AAAA,QAC/B;AAAA,MACF,WACE,QAAQ,SAAS,yBACjB,eAAe,SAAS,KAAY,GACpC;AACA;AAAA,UACE;AAAA,UACA;AAAA,UACA;AAAA,UACA;AAAA,QACF;AAAA,MACF,WAAW,QAAQ,SAAS,qBAAqB,UAAU,WAAW;AACpE;AAAA,UACE;AAAA,UACA;AAAA,UACA;AAAA,UACA;AAAA,QACF;AAAA,MACF,WAAW,QAAQ,SAAS,gBAAgB,QAAQ,UAAU,WAAW;AACvE,YAAI,QAAQ,UAAU,SAAS,eAAe,SAAS,KAAY,GAAG;AACpE,qBAAW,EAAE,QAAQ,eAAe,KAAK;AAAA,YACvC;AAAA,cACE,QAAQ,QAAQ,mBAAmB,OAAO,QAAQ,CAAC;AAAA,cACnD,gBAAgB,+BAA+B,OAAO;AAAA,YACxD;AAAA,YACA;AAAA,cACE,QAAQ,QAAQ,mBAAmB,OAAO,YAAY,CAAC;AAAA,cACvD,gBAAgB,yCAAyC,OAAO;AAAA,YAClE;AAAA,UACF,GAAG;AACD,kBAAM,iBAAiB,mBAAmB,QAAQ,cAAc;AAChE,kBAAM,KAAK,cAAc,EAAE,IAAI,mBAAmB;AAAA,cAChD,iBAAiB;AAAA,YACnB,CAAC;AAED,gBAAI,QAAQ,UAAU,kBAAkB,QAAQ,cAAc;AAC5D,iBAAG,IAAI,iBAAiB;AAAA,gBACtB,kBAAkB,QAAQ;AAAA,cAC5B,CAAC;AAAA,YACH;AAEA,eAAG,IAAI,mBAAmB,EAAE,GAAG,QAAQ,GAAG,GAAG,IAAI,QAAQ,CAAC,EAAE,CAAC;AAE7D,gBAAI,QAAQ,UAAU,kBAAkB,QAAQ,cAAc;AAE5D,iBAAG,IAAI,iBAAiB,EAAE,kBAAkB,EAAE,CAAC;AAAA,YACjD;AAEA,mBAAO,KAAK,GAAG,GAAG,MAAM,CAAC;AAAA,UAC3B;AAAA,QACF;AAAA,MACF,WAAW,QAAQ,SAAS,gBAAgB,QAAQ,UAAU,WAAW;AACvE,YAAI,QAAQ,UAAU,SAAS,eAAe,SAAS,KAAY,GAAG;AACpE,gBAAM,mBAAmB;AAAA,YACvB,QAAQ,mBAAmB,OAAO,QAAQ,CAAC;AAAA,UAC7C;AAEA,cAAI,QAAQ,gCAAgC,MAAM;AAChD,6BAAiB;AAAA,cACf,QAAQ,mBAAmB,OAAO,YAAY,CAAC;AAAA,YACjD;AAAA,UACF;AAEA,qBAAW,UAAU,kBAAkB;AACrC,kBAAM,cAAc,cAAc,EAC/B,IAAI,mBAAmB,EAAE,iBAAiB,GAAG,CAAC,EAC9C,IAAI,0BAA0B,CAAC,CAAC;AAEnC,kBAAM,EAAE,OAAO,IAAI;AACnB,gBAAI,UAAU,OAAO,SAAS,GAAG;AAC/B,0BAAY,IAAI,kBAAkB;AAAA,gBAChC,GAAG,OAAO,CAAC,EAAE;AAAA,gBACb,GAAG,IAAI,OAAO,CAAC,EAAE,CAAC;AAAA,cACpB,CAAC;AACD,uBAAS,IAAI,GAAG,IAAI,OAAO,QAAQ,KAAK;AACtC,4BAAY,IAAI,kBAAkB;AAAA,kBAChC,GAAG,OAAO,CAAC,EAAE;AAAA,kBACb,GAAG,IAAI,OAAO,CAAC,EAAE,CAAC;AAAA,gBACpB,CAAC;AAAA,cACH;AACA,0BAAY,IAAI,kBAAkB;AAAA,gBAChC,GAAG,OAAO,CAAC,EAAE;AAAA,gBACb,GAAG,IAAI,OAAO,CAAC,EAAE,CAAC;AAAA,cACpB,CAAC;AAAA,YACH;AAEA,wBAAY,IAAI,wBAAwB,CAAC,CAAC;AAE1C,mBAAO,KAAK,GAAG,YAAY,MAAM,CAAC;AAAA,UACpC;AAAA,QACF;AAAA,MACF,WAAW,QAAQ,SAAS,oBAAoB;AAC9C,YAAI,QAAQ,UAAU,SAAS,eAAe,SAAS,KAAY,GAAG;AACpE,gBAAM,SAAS,QAAQ,mBAAmB,OAAO,OAAO,CAAC;AACzD,cAAI,WAAW;AACf,cACE,kBAAkB,WAClB,OAAO,QAAQ,iBAAiB,UAChC;AACA,uBAAW,QAAQ;AAAA,UACrB,OAAO;AAEL,kBAAM,aAAa,YAAY;AAAA,cAC7B,CACE,cAEA,UAAU,SAAS,qBACnB,UAAU,MAAM,QAAQ,KACxB,UAAU,MAAM,QAAQ,KACxB,kBAAkB,aAClB,OAAO,UAAU,iBAAiB;AAAA,YACtC;AACA,gBAAI,YAAY;AACd,yBAAW,WAAW;AAAA,YACxB;AAAA,UACF;AAEA,cAAI,iBAAiB,oCAAoC,OAAO;AAChE,cACE,QAAQ,UAAU,WACjB,aAAa,MAAM,aAAa,MACjC;AACA,6BAAiB,oCAAoC;AAAA,cACnD,GAAG;AAAA,cACH,OAAO,QAAQ;AAAA,cACf,QAAQ,QAAQ;AAAA,YAClB,CAAC;AACD,uBAAW;AAAA,UACb;AAEA,gBAAM,kBAAkB,mBAAmB,QAAQ,cAAc;AAEjE,gBAAM,KAAK,cAAc,EAAE,IAAI,mBAAmB;AAAA,YAChD;AAAA,UACF,CAAC;AACD,cAAI,UAAU;AACZ,eAAG,IAAI,iBAAiB;AAAA,cACtB,kBAAkB;AAAA,YACpB,CAAC;AAAA,UACH;AACA,aAAG,IAAI,mBAAmB,EAAE,GAAG,QAAQ,GAAG,GAAG,IAAI,QAAQ,CAAC,EAAE,CAAC;AAC7D,cAAI,UAAU;AACZ,eAAG,IAAI,iBAAiB,EAAE,kBAAkB,EAAE,CAAC;AAAA,UACjD;AACA,iBAAO,KAAK,GAAG,GAAG,MAAM,CAAC;AAAA,QAC3B;AAAA,MACF,WAAW,QAAQ,SAAS,mBAAmB;AAC7C,YAAI,QAAQ,OAAO,SAAS,KAAY,GAAG;AACzC,gBAAM,gBAAgB;AAAA,YACpB,QAAQ,mBAAmB,OAAO,QAAQ,CAAC;AAAA,UAC7C;AACA,cACE,eAAe,SAAS,KAAY,KACpC,QAAQ,gCAAgC,MACxC;AACA,0BAAc,KAAK,QAAQ,mBAAmB,OAAO,YAAY,CAAC,CAAC;AAAA,UACrE;AACA,qBAAW,UAAU,eAAe;AAElC,kBAAM,QACJ,gBAAgB,WAAW,OAAO,QAAQ,eAAe,WACrD,QAAQ,aACR;AACN,kBAAM,QACJ,iBAAiB,WACjB,OAAO,QAAQ,gBAAgB,WAC3B,QAAQ,cACR;AAEN,kBAAM,qBAA+B,CAAC,KAAK;AAC3C,gBACE,iBAAiB,WACjB,OAAO,QAAQ,gBAAgB,UAC/B;AACA,iCAAmB,KAAK,QAAQ,WAAW;AAAA,YAC7C;AACA,gBACE,oBAAoB,WACpB,OAAO,QAAQ,mBAAmB,UAClC;AACA,iCAAmB,KAAK,QAAQ,cAAc;AAAA,YAChD;AACA,kBAAM,OAAO,KAAK,IAAI,GAAG,kBAAkB;AAE3C,kBAAM,sBAAgC,CAAC,KAAK;AAC5C,gBACE,kBAAkB,WAClB,OAAO,QAAQ,iBAAiB,UAChC;AACA,kCAAoB,KAAK,QAAQ,YAAY;AAAA,YAC/C;AACA,gBACE,qBAAqB,WACrB,OAAO,QAAQ,oBAAoB,UACnC;AACA,kCAAoB,KAAK,QAAQ,eAAe;AAAA,YAClD;AACA,kBAAM,OAAO,KAAK,IAAI,GAAG,mBAAmB;AAE5C,gBAAI,QAAQ,UAAU,QAAQ;AAE5B,oBAAM,uBAAuB;AAAA,gBAC3B,wBAAwB;AAAA,gBACxB,UAAU,KAAK,IAAI,MAAM,IAAI;AAAA,cAC/B;AAEA,kBAAI;AACJ,kBAAI;AACF,kCAAkB;AAAA,kBAChB;AAAA,kBACA;AAAA,gBACF;AAAA,cACF,QAAQ;AACN,kCACE,KAAK;AAAA,kBACH,GAAG,OACA,OAAO,CAAC,QAAQ,qBAAqB,GAAG,EACxC,IAAI,CAAC,QAAQ,IAAI,eAAe;AAAA,kBACnC;AAAA,gBACF,IAAI;AAEN,uBAAO;AAAA,kBACL,GAAG,cAAc,EACd,IAAI,4BAA4B;AAAA,oBAC/B;AAAA,oBACA,GAAG;AAAA,kBACL,CAAC,EACA,MAAM;AAAA,gBACX;AAAA,cACF;AAEA,oBAAM,KAAK,cAAc,EAAE,IAAI,mBAAmB;AAAA,gBAChD;AAAA,cACF,CAAC;AAED,oBAAM,mBACF,QAAQ,gBAAgB,KAAK,KAAK,KAAM;AAC5C,oBAAM,WAAW,KAAK,IAAI,eAAe;AACzC,oBAAM,WAAW,KAAK,IAAI,eAAe;AAEzC,oBAAM,qBAAqB,CAAC,IAAY,OAAe;AACrD,sBAAM,WAAW,KAAK,WAAW,KAAK;AACtC,sBAAM,WAAW,KAAK,WAAW,KAAK;AACtC,uBAAO;AAAA,kBACL,GAAG,QAAQ,IAAI;AAAA,kBACf,GAAG,QAAQ,IAAI;AAAA,gBACjB;AAAA,cACF;AAEA,oBAAM,eAAe,QAAQ;AAC7B,oBAAM,SAAS,gBACV,OAAO,QAAQ,KACf,OAAO,QAAQ;AAEpB,kBAAI,UAAU,GAAG;AACf,sBAAM,SAAS,mBAAmB,GAAG,CAAC;AACtC,mBAAG,IAAI,mBAAmB,EAAE,GAAG,OAAO,GAAG,GAAG,IAAI,OAAO,CAAC,EAAE,CAAC;AAAA,cAC7D,OAAO;AACL,sBAAM,gBAAgB,eAClB,EAAE,GAAG,CAAC,QAAQ,GAAG,EAAE,IACnB,EAAE,GAAG,GAAG,GAAG,CAAC,OAAO;AACvB,sBAAM,cAAc,eAChB,EAAE,GAAG,QAAQ,GAAG,EAAE,IAClB,EAAE,GAAG,GAAG,GAAG,OAAO;AAEtB,sBAAM,aAAa;AAAA,kBACjB,cAAc;AAAA,kBACd,cAAc;AAAA,gBAChB;AACA,sBAAM,WAAW;AAAA,kBACf,YAAY;AAAA,kBACZ,YAAY;AAAA,gBACd;AAEA,mBAAG,IAAI,mBAAmB;AAAA,kBACxB,GAAG,WAAW;AAAA,kBACd,GAAG,IAAI,WAAW,CAAC;AAAA,gBACrB,CAAC,EACE,IAAI,kBAAkB;AAAA,kBACrB,GAAG,WAAW;AAAA,kBACd,GAAG,IAAI,WAAW,CAAC;AAAA,gBACrB,CAAC,EACA,IAAI,kBAAkB;AAAA,kBACrB,GAAG,SAAS;AAAA,kBACZ,GAAG,IAAI,SAAS,CAAC;AAAA,gBACnB,CAAC,EACA,IAAI,mBAAmB;AAAA,kBACtB,GAAG,SAAS;AAAA,kBACZ,GAAG,IAAI,SAAS,CAAC;AAAA,gBACnB,CAAC;AAAA,cACL;AAEA,qBAAO,KAAK,GAAG,GAAG,MAAM,CAAC;AAAA,YAC3B,OAAO;AAEL,oBAAM,iBAAiB,mCAAmC;AAAA,gBACxD,GAAG;AAAA,gBACH,GAAI,QAAQ,UAAU,WAClB,EAAE,aAAa,MAAM,cAAc,KAAK,IACxC,CAAC;AAAA,cACP,CAAC;AACD,oBAAM,WACJ,uBAAuB,WACvB,OAAO,QAAQ,sBAAsB,YACrC,KAAK,IAAI,OAAO,IAAI,IAAI,OACpB,QAAQ,oBACR;AAEN,oBAAM,KAAK,cAAc,EAAE,IAAI,mBAAmB;AAAA,gBAChD,iBAAiB,mBAAmB,QAAQ,cAAc;AAAA,cAC5D,CAAC;AAED,kBAAI;AACF,mBAAG,IAAI,iBAAiB,EAAE,kBAAkB,SAAS,CAAC;AAExD,iBAAG,IAAI,mBAAmB,EAAE,GAAG,QAAQ,GAAG,GAAG,IAAI,QAAQ,CAAC,EAAE,CAAC;AAE7D,kBAAI,SAAU,IAAG,IAAI,iBAAiB,EAAE,kBAAkB,EAAE,CAAC;AAE7D,qBAAO,KAAK,GAAG,GAAG,MAAM,CAAC;AAAA,YAC3B;AAAA,UACF;AAAA,QACF;AAAA,MACF,WAAW,QAAQ,SAAS,YAAY;AACtC,YACE,eAAe,SAAS,KAAY,KACpC,QAAQ,gCAAgC,MACxC;AACA,qBAAW,UAAU;AAAA,YACnB,QAAQ,mBAAmB,OAAO,YAAY,CAAC;AAAA,UACjD,GAAG;AACD,gBAAI,QAAQ,eAAe,UAAU;AACnC,sBAAQ;AAAA,gBACN;AAAA,cACF;AACA;AAAA,YACF;AACA,mBAAO;AAAA,cACL,GAAG,cAAc,EACd,IAAI,mBAAmB;AAAA,gBACtB,iBAAiB;AAAA,kBACf;AAAA,kBACA,mCAAmC,OAAO;AAAA,gBAC5C;AAAA,cACF,CAAC,EACA,IAAI,mBAAmB,EAAE,GAAG,QAAQ,GAAG,GAAG,IAAI,QAAQ,CAAC,EAAE,CAAC,EAC1D,MAAM;AAAA,YACX;AAAA,UACF;AAAA,QACF;AAAA,MACF,WAAW,QAAQ,SAAS,WAAW;AACrC,YAAI,QAAQ,OAAO,SAAS,KAAY,GAAG;AACzC,gBAAM,gBAAgB;AAAA,YACpB,QAAQ,mBAAmB,OAAO,QAAQ,CAAC;AAAA,UAC7C;AACA,cACE,QAAQ,cAAc,SACtB,eAAe,SAAS,KAAY,GACpC;AACA,0BAAc,KAAK,QAAQ,mBAAmB,OAAO,YAAY,CAAC,CAAC;AAAA,UACrE;AACA,qBAAW,UAAU,eAAe;AAClC,mBAAO;AAAA,cACL,GAAG,cAAc,EACd,IAAI,mBAAmB;AAAA,gBACtB,iBAAiB;AAAA,kBACf;AAAA,kBACA,mCAAmC,OAAO;AAAA,gBAC5C;AAAA,cACF,CAAC,EACA,IAAI,mBAAmB,EAAE,GAAG,QAAQ,GAAG,GAAG,IAAI,QAAQ,CAAC,EAAE,CAAC,EAC1D,MAAM;AAAA,YACX;AAAA,UACF;AAAA,QACF;AAAA,MACF,WAAW,QAAQ,SAAS,eAAe,UAAU,WAAW;AAE9D,YAAI,SAAU;AAEd,cAAM,SAAS,QAAQ;AACvB,cAAM,EAAE,OAAO,QAAQ,QAAQ,QAAQ,IAAI;AAC3C,cAAM,cAAc,cAAc,EAAE,IAAI,mBAAmB;AAAA,UACzD,iBAAiB;AAAA,QACnB,CAAC;AACD,YAAI,WAAW,QAAQ,SAAS,GAAG;AACjC,gBAAM,gBAAgB,QAAQ,IAAI,CAAC,WAAW;AAAA,YAC5C,GAAG,MAAM;AAAA,YACT,GAAG,IAAI,MAAM,CAAC;AAAA,UAChB,EAAE;AAEF,gBAAM,aAAa,cAAc,CAAC;AAClC,sBAAY,IAAI,kBAAkB,UAAU;AAC5C,mBAAS,IAAI,GAAG,IAAI,cAAc,QAAQ,KAAK;AAC7C,wBAAY,IAAI,kBAAkB,cAAc,CAAC,CAAC;AAAA,UACpD;AAEA,gBAAM,YAAY,cAAc,cAAc,SAAS,CAAC;AACxD,cAAI,UAAU,MAAM,WAAW,KAAK,UAAU,MAAM,WAAW,GAAG;AAChE,wBAAY,IAAI,kBAAkB,UAAU;AAAA,UAC9C;AAAA,QACF,OAAO;AACL,sBACG,IAAI,kBAAkB;AAAA,YACrB,GAAG,OAAQ,IAAI,QAAS;AAAA,YACxB,GAAG,IAAI,OAAQ,IAAI,SAAU,CAAC;AAAA,UAChC,CAAC,EACA,IAAI,kBAAkB;AAAA,YACrB,GAAG,OAAQ,IAAI,QAAS;AAAA,YACxB,GAAG,IAAI,OAAQ,IAAI,SAAU,CAAC;AAAA,UAChC,CAAC,EAKA,IAAI,kBAAkB;AAAA,YACrB,GAAG,OAAQ,IAAI,QAAS;AAAA,YACxB,GAAG,IAAI,OAAQ,IAAI,SAAU,CAAC;AAAA,UAChC,CAAC,EAKA,IAAI,kBAAkB;AAAA,YACrB,GAAG,OAAQ,IAAI,QAAS;AAAA,YACxB,GAAG,IAAI,OAAQ,IAAI,SAAU,CAAC;AAAA,UAChC,CAAC,EAKA,IAAI,kBAAkB;AAAA,YACrB,GAAG,OAAQ,IAAI,QAAS;AAAA,YACxB,GAAG,IAAI,OAAQ,IAAI,SAAU,CAAC;AAAA,UAChC,CAAC;AAAA,QACL;AAEA,eAAO,KAAK,GAAG,YAAY,MAAM,CAAC;AAAA,MACpC,WAAW,QAAQ,SAAS,eAAe,UAAU,WAAW;AAC9D,cAAM,SAAS,QAAQ;AACvB,cAAM,QAAQ;AACd,cAAM,EAAE,OAAO,QAAQ,OAAO,IAAI;AAClC,cAAM,cAAc,cAAc,EAC/B,IAAI,mBAAmB;AAAA,UACtB,iBAAiB;AAAA,QACnB,CAAC,EACA,IAAI,kBAAkB;AAAA,UACrB,GAAG,OAAQ,IAAI,QAAS;AAAA,UACxB,GAAG,IAAI,OAAQ,IAAI,SAAU,CAAC;AAAA,QAChC,CAAC,EACA,IAAI,kBAAkB;AAAA,UACrB,GAAG,OAAQ,IAAI,QAAS;AAAA,UACxB,GAAG,IAAI,OAAQ,IAAI,SAAU,CAAC;AAAA,QAChC,CAAC,EACA,IAAI,kBAAkB;AAAA,UACrB,GAAG,OAAQ,IAAI,QAAS;AAAA,UACxB,GAAG,IAAI,OAAQ,IAAI,SAAU,CAAC;AAAA,QAChC,CAAC,EACA,IAAI,kBAAkB;AAAA,UACrB,GAAG,OAAQ,IAAI,QAAS;AAAA,UACxB,GAAG,IAAI,OAAQ,IAAI,SAAU,CAAC;AAAA,QAChC,CAAC,EACA,IAAI,kBAAkB;AAAA,UACrB,GAAG,OAAQ,IAAI,QAAS;AAAA,UACxB,GAAG,IAAI,OAAQ,IAAI,SAAU,CAAC;AAAA,QAChC,CAAC;AAEH,eAAO,KAAK,GAAG,YAAY,MAAM,CAAC;AAAA,MACpC,WAAW,QAAQ,SAAS,cAAc;AACxC,YAAI,UAAU,WAAW;AACvB,gBAAM,WAAW,QAAQ;AACzB,gBAAM,iBAAiB,cAAc,EAAE,IAAI,mBAAmB;AAAA,YAC5D,iBAAiB;AAAA,UACnB,CAAC;AAED,gBAAM,KAAK;AAEX,cAAI,GAAG,UAAU,QAAQ;AACvB,kBAAM,EAAE,QAAQ,OAAO,QAAQ,UAAU,cAAc,IAAI;AAC3D,kBAAM,IAAI,QAAQ;AAClB,kBAAM,IAAI,SAAS;AACnB,kBAAM,IAAI,KAAK;AAAA,cACb;AAAA,cACA,KAAK,IAAI,iBAAiB,GAAG,KAAK,IAAI,CAAC,GAAG,KAAK,IAAI,CAAC,CAAC;AAAA,YACvD;AAEA,kBAAM,sBAAsB,MAAM;AAChC,kBAAIC,mBAAkB,SAAS;AAC/B,kBAAI,UAAU;AACZ,sBAAM,YAAa,WAAW,KAAK,KAAM;AACzC,gBAAAA,mBAAkB,OAAO,SAAS;AAAA,cACpC;AACA,qBAAO,QAAQ,UAAU,OAAO,GAAG,OAAO,CAAC,GAAGA,gBAAe;AAAA,YAC/D;AAEA,kBAAM,kBAAkB,oBAAoB;AAE5C,gBAAI,IAAI,GAAG;AACT,oBAAM,aAAa,EAAE,GAAG,CAAC,IAAI,GAAG,GAAG,EAAE;AAErC,kBAAI,eAAe,aAAa,iBAAiB,UAAU;AAE3D,6BAAe,IAAI,kBAAkB;AAAA,gBACnC,GAAG,aAAa;AAAA,gBAChB,GAAG,IAAI,aAAa,CAAC;AAAA,cACvB,CAAC;AAED,oBAAM,UAAU,CAAC,UAAoC;AACnD,sBAAM,mBAAmB,aAAa,iBAAiB,KAAK;AAC5D,+BAAe,IAAI,kBAAkB;AAAA,kBACnC,GAAG,iBAAiB;AAAA,kBACpB,GAAG,IAAI,iBAAiB,CAAC;AAAA,gBAC3B,CAAC;AACD,+BAAe;AAAA,cACjB;AAEA,oBAAM,SAAS,CAAC,YAGV;AACJ,sBAAM,mBAAmB;AAAA,kBACvB;AAAA,kBACA,QAAQ;AAAA,gBACV;AACA,sBAAM,oBAAoB;AAAA,kBACxB;AAAA,kBACA,QAAQ;AAAA,gBACV;AAEA,+BACG,IAAI,2CAA2C,CAAC,CAAC,EACjD,IAAI,kBAAkB;AAAA,kBACrB,GAAG,iBAAiB;AAAA,kBACpB,GAAG,IAAI,iBAAiB,CAAC;AAAA,kBACzB,GAAG,kBAAkB,IAAI,aAAa;AAAA,kBACtC,GAAG,IAAI,kBAAkB,CAAC,IAAI,IAAI,aAAa,CAAC;AAAA,gBAClD,CAAC,EACA,IAAI,+BAA+B,CAAC,CAAC;AAExC,+BAAe;AAAA,cACjB;AAEA,sBAAQ,EAAE,GAAG,IAAI,GAAG,GAAG,EAAE,CAAC;AAC1B,qBAAO;AAAA,gBACL,OAAO,EAAE,GAAG,GAAG,GAAG,IAAI,EAAE;AAAA,gBACxB,QAAQ,EAAE,GAAG,IAAI,GAAG,GAAG,IAAI,EAAE;AAAA,cAC/B,CAAC;AACD,sBAAQ,EAAE,GAAG,GAAG,GAAG,CAAC,IAAI,EAAE,CAAC;AAC3B,qBAAO;AAAA,gBACL,OAAO,EAAE,GAAG,IAAI,GAAG,GAAG,CAAC,EAAE;AAAA,gBACzB,QAAQ,EAAE,GAAG,IAAI,GAAG,GAAG,CAAC,IAAI,EAAE;AAAA,cAChC,CAAC;AACD,sBAAQ,EAAE,GAAG,CAAC,IAAI,GAAG,GAAG,CAAC,EAAE,CAAC;AAC5B,qBAAO;AAAA,gBACL,OAAO,EAAE,GAAG,CAAC,GAAG,GAAG,CAAC,IAAI,EAAE;AAAA,gBAC1B,QAAQ,EAAE,GAAG,CAAC,IAAI,GAAG,GAAG,CAAC,IAAI,EAAE;AAAA,cACjC,CAAC;AACD,sBAAQ,EAAE,GAAG,CAAC,GAAG,GAAG,IAAI,EAAE,CAAC;AAC3B,qBAAO;AAAA,gBACL,OAAO,EAAE,GAAG,CAAC,IAAI,GAAG,GAAG,EAAE;AAAA,gBACzB,QAAQ,EAAE,GAAG,CAAC,IAAI,GAAG,GAAG,IAAI,EAAE;AAAA,cAChC,CAAC;AAAA,YACH,OAAO;AACL,oBAAM,SAAS;AAAA,gBACb,EAAE,GAAG,CAAC,GAAG,GAAG,EAAE;AAAA;AAAA,gBACd,EAAE,GAAG,GAAG,GAAG,EAAE;AAAA;AAAA,gBACb,EAAE,GAAG,GAAG,GAAG,CAAC,EAAE;AAAA;AAAA,gBACd,EAAE,GAAG,CAAC,GAAG,GAAG,CAAC,EAAE;AAAA;AAAA,cACjB;AAEA,oBAAM,oBAAoB,OAAO;AAAA,gBAAI,CAAC,MACpC,aAAa,iBAAiB,CAAC;AAAA,cACjC;AAEA,6BAAe,IAAI,kBAAkB;AAAA,gBACnC,GAAG,kBAAkB,CAAC,EAAE;AAAA,gBACxB,GAAG,IAAI,kBAAkB,CAAC,EAAE,CAAC;AAAA,cAC/B,CAAC;AACD,uBAAS,IAAI,GAAG,IAAI,kBAAkB,QAAQ,KAAK;AACjD,+BAAe,IAAI,kBAAkB;AAAA,kBACnC,GAAG,kBAAkB,CAAC,EAAE;AAAA,kBACxB,GAAG,IAAI,kBAAkB,CAAC,EAAE,CAAC;AAAA,gBAC/B,CAAC;AAAA,cACH;AACA,6BAAe,IAAI,kBAAkB;AAAA,gBACnC,GAAG,kBAAkB,CAAC,EAAE;AAAA,gBACxB,GAAG,IAAI,kBAAkB,CAAC,EAAE,CAAC;AAAA,cAC/B,CAAC;AAAA,YACH;AAAA,UACF,WAAW,GAAG,UAAU,UAAU;AAChC,kBAAM,EAAE,QAAQ,OAAO,IAAI;AAG3B,kBAAM,KAAK,EAAE,GAAG,OAAO,IAAI,QAAQ,GAAG,OAAO,EAAE;AAC/C,kBAAM,KAAK,EAAE,GAAG,OAAO,IAAI,QAAQ,GAAG,OAAO,EAAE;AAE/C,2BACG,IAAI,kBAAkB;AAAA,cACrB,GAAG,GAAG;AAAA,cACN,GAAG,IAAI,GAAG,CAAC;AAAA,YACb,CAAC,EACA,IAAI,kDAAkD,CAAC,CAAC,EAExD,IAAI,kBAAkB;AAAA,cACrB,GAAG,GAAG;AAAA,cACN,GAAG,IAAI,GAAG,CAAC;AAAA,cACX,GAAG,CAAC;AAAA,cACJ,GAAG;AAAA,YACL,CAAC,EAEA,IAAI,kBAAkB;AAAA,cACrB,GAAG,GAAG;AAAA,cACN,GAAG,IAAI,GAAG,CAAC;AAAA,cACX,GAAG;AAAA,cACH,GAAG;AAAA,YACL,CAAC,EACA,IAAI,+BAA+B,CAAC,CAAC;AAAA,UAC1C,WAAW,GAAG,UAAU,WAAW;AACjC,kBAAM,EAAE,OAAO,IAAI;AACnB,gBAAI,OAAO,SAAS,GAAG;AACrB,6BAAe,IAAI,kBAAkB;AAAA,gBACnC,GAAG,OAAO,CAAC,EAAE;AAAA,gBACb,GAAG,IAAI,OAAO,CAAC,EAAE,CAAC;AAAA,cACpB,CAAC;AACD,uBAAS,IAAI,GAAG,IAAI,OAAO,QAAQ,KAAK;AACtC,+BAAe,IAAI,kBAAkB;AAAA,kBACnC,GAAG,OAAO,CAAC,EAAE;AAAA,kBACb,GAAG,IAAI,OAAO,CAAC,EAAE,CAAC;AAAA,gBACpB,CAAC;AAAA,cACH;AACA,6BAAe,IAAI,kBAAkB;AAAA,gBACnC,GAAG,OAAO,CAAC,EAAE;AAAA,gBACb,GAAG,IAAI,OAAO,CAAC,EAAE,CAAC;AAAA,cACpB,CAAC;AAAA,YACH;AAAA,UACF;AACA,mBAAS,KAAK,GAAG,eAAe,MAAM,CAAC;AAAA,QACzC;AAAA,MACF;AAAA,IACF;AAAA,EACF;AAEA,aAAW,OAAO,OAAO,KAAK,OAAO,GAAG;AACtC,YAAQ,GAAqC,EAAE;AAAA,MAC7C,GAAG,cAAc,EAAE,IAAI,eAAe,CAAC,CAAC,EAAE,MAAM;AAAA,IAClD;AAAA,EACF;AAEA,SAAO;AACT;","names":["z","z","z","z","z","z","z","z","z","z","z","z","z","z","z","z","z","z","z","z","z","z","z","z","z","z","z","z","z","z","z","z","z","z","z","z","z","z","z","z","z","z","z","z","z","z","z","z","z","z","z","z","z","z","z","z","z","z","z","z","z","z","z","z","z","z","z","z","z","z","z","z","z","z","z","z","z","z","z","z","z","z","z","z","z","z","z","z","z","z","z","z","getLayerCount","transformMatrix"]}