circuit-json-to-gerber 0.0.30 → 0.0.32

package/dist/{chunk-S7RCL42B.js → chunk-GERIAHNJ.js}

@@ -484,13 +484,12 @@ import { z as z26 } from "zod";
 var create_arc = defineGerberCommand({
   command_code: "G75",
   schema: z26.object({
-    command_code: z26.literal("G75").default("G75"),
-    arc_parameters: z26.string()
+    command_code: z26.literal("G75").default("G75")
   }).describe(
     "Create arc: A G75 must be called before creating the first arc."
   ),
   stringify() {
-    return "";
+    return "G75*";
   }
 });
 
@@ -556,10 +555,15 @@ var end_of_file = defineGerberCommand({
 
 // src/gerber/commands/end_region_statement.ts
 import { z as z31 } from "zod";
-var end_region_statement = z31.object({
-  command_code: z31.literal("G37"),
-  statement: z31.string()
-}).describe("End region statement: Ends the region statement");
+var end_region_statement = defineGerberCommand({
+  command_code: "G37",
+  schema: z31.object({
+    command_code: z31.literal("G37").default("G37")
+  }).describe("End region statement: Ends the region statement"),
+  stringify() {
+    return "G37*";
+  }
+});
 
 // src/gerber/commands/flash_operation.ts
 import { z as z32 } from "zod";
@@ -660,15 +664,22 @@ var plot_operation = defineGerberCommand({
   schema: z38.object({
     command_code: z38.literal("D01").default("D01"),
     x: z38.number(),
-    y: z38.number()
+    y: z38.number(),
+    i: z38.number().optional(),
+    j: z38.number().optional()
   }).describe(
     "Plot operation: Outside a region statement D01 creates a draw or arc object with the current aperture. Inside it adds a draw/arc segment to the contour under construction. The current point is moved to draw/arc end point after the creation of the draw/arc."
   ),
-  stringify({ x, y }) {
-    const [gx, gy] = [x, y].map(
-      (coord) => getGerberCoordinateWithPadding(coord)
-    );
-    return `X${gx}Y${gy}D01*`;
+  stringify({ x, y, i, j }) {
+    const gx = getGerberCoordinateWithPadding(x);
+    const gy = getGerberCoordinateWithPadding(y);
+    let cmd = `X${gx}Y${gy}`;
+    if (i !== void 0 && j !== void 0) {
+      const gi = getGerberCoordinateWithPadding(i);
+      const gj = getGerberCoordinateWithPadding(j);
+      cmd += `I${gi}J${gj}`;
+    }
+    return `${cmd}D01*`;
   }
 });
 
@@ -691,7 +702,7 @@ import { z as z41 } from "zod";
 var set_movement_mode_to_clockwise_circular = defineGerberCommand({
   command_code: "G02",
   schema: z41.object({
-    command_code: z41.literal("G02")
+    command_code: z41.literal("G02").default("G02")
   }).describe(
     "Set movement mode to clockwise circular: Sets linear/circular mode to clockwise circular."
   ),
@@ -706,7 +717,7 @@ var set_movement_mode_to_counterclockwise_circular = defineGerberCommand({
   command_code: "G03",
   // Add the missing command_code property
   schema: z42.object({
-    command_code: z42.literal("G03")
+    command_code: z42.literal("G03").default("G03")
   }).describe(
     "Set movement mode to counterclockwise circular: Sets linear/circular mode to counterclockwise circular."
   ),
@@ -744,12 +755,17 @@ var set_unit = defineGerberCommand({
 
 // src/gerber/commands/start_region_statement.ts
 import { z as z45 } from "zod";
-var start_region_statement = z45.object({
-  command_code: z45.literal("G36"),
-  statement: z45.string()
-}).describe(
-  "Start region statement: Starts a region statement which creates a region by defining its contours."
-);
+var start_region_statement = defineGerberCommand({
+  command_code: "G36",
+  schema: z45.object({
+    command_code: z45.literal("G36").default("G36")
+  }).describe(
+    "Start region statement: Starts a region statement which creates a region by defining its contours."
+  ),
+  stringify() {
+    return "G36*";
+  }
+});
 
 // src/gerber/commands/step_and_repeat.ts
 import { z as z46 } from "zod";
@@ -928,8 +944,7 @@ var gerber_command_map = {
   end_of_file,
   move_operation,
   flash_operation,
-  // end_region_statement,
-  // flash_operation,
+  end_region_statement,
   format_specification,
   // load_mirroring,
   // load_polarity,
@@ -944,8 +959,8 @@ var gerber_command_map = {
   set_movement_mode_to_linear,
   select_aperture,
   set_unit,
-  set_layer_polarity
-  // start_region_statement,
+  set_layer_polarity,
+  start_region_statement
   // step_and_repeat,
 };
 
@@ -1368,7 +1383,7 @@ var findApertureNumber = (glayer, search_params) => {
 // package.json
 var package_default = {
   name: "circuit-json-to-gerber",
-  version: "0.0.29",
+  version: "0.0.31",
   main: "dist/index.js",
   type: "module",
   scripts: {
@@ -1384,23 +1399,22 @@ var package_default = {
   },
   devDependencies: {
     "@biomejs/biome": "^1.8.3",
-    "@tscircuit/core": "^0.0.580",
     "@types/archiver": "^6.0.3",
     "@types/bun": "^1.1.8",
     "@types/node": "^22.5.2",
-    "@types/react": "^18.3.12",
     archiver: "^7.0.1",
-    "bun-match-svg": "^0.0.3",
+    react: "^19.1.0",
+    "@types/react": "^19.1.8",
+    "bun-match-svg": "^0.0.13",
     commander: "^12.1.0",
     "gerber-to-svg": "^4.2.8",
     "pcb-stackup": "^4.2.8",
-    react: "^18.3.1",
     tsup: "^8.2.4",
-    "circuit-json": "^0.0.220"
+    tscircuit: "^0.0.643"
   },
   peerDependencies: {
     typescript: "^5.0.0",
-    "circuit-json": "*"
+    tscircuit: "*"
   },
   dependencies: {
     "@tscircuit/alphabet": "^0.0.2",
@@ -1448,7 +1462,9 @@ var getCommandHeaders = (opts) => {
     comment: "Gerber Fmt 4.6, Leading zero omitted, Abs format (unit mm)"
   }).add("comment", {
     comment: `Created by tscircuit (builder) date ${(/* @__PURE__ */ new Date()).toISOString()}`
-  }).add("set_movement_mode_to_linear", {}).build();
+  }).add("set_movement_mode_to_linear", {}).add("set_layer_polarity", {
+    polarity: "D"
+  }).add("create_arc", {}).build();
 };
 
 // src/gerber/convert-soup-to-gerber-commands/getGerberLayerName.ts
@@ -1922,29 +1938,22 @@ var convertSoupToGerberCommands = (soup, opts = {}) => {
             });
           } else if (el.shape === "circle") {
             const { center, radius } = el;
-            const numSegments = 36;
-            const angleStep = 2 * Math.PI / numSegments;
-            const points = [];
-            for (let i = 0; i < numSegments; i++) {
-              points.push({
-                x: center.x + radius * Math.cos(i * angleStep),
-                y: center.y + radius * Math.sin(i * angleStep)
-              });
-            }
+            const p1 = { x: center.x + radius, y: center.y };
+            const p2 = { x: center.x - radius, y: center.y };
             cutout_builder.add("move_operation", {
-              x: points[0].x,
-              y: mfy(points[0].y)
-            });
-            for (let i = 1; i < points.length; i++) {
-              cutout_builder.add("plot_operation", {
-                x: points[i].x,
-                y: mfy(points[i].y)
-              });
-            }
-            cutout_builder.add("plot_operation", {
-              x: points[0].x,
-              y: mfy(points[0].y)
-            });
+              x: p1.x,
+              y: mfy(p1.y)
+            }).add("set_movement_mode_to_counterclockwise_circular", {}).add("plot_operation", {
+              x: p2.x,
+              y: mfy(p2.y),
+              i: -radius,
+              j: 0
+            }).add("plot_operation", {
+              x: p1.x,
+              y: mfy(p1.y),
+              i: radius,
+              j: 0
+            }).add("set_movement_mode_to_linear", {});
           } else if (el.shape === "polygon") {
             const { points } = el;
             if (points.length > 0) {
@@ -1966,6 +1975,159 @@ var convertSoupToGerberCommands = (soup, opts = {}) => {
           }
           ec_layer.push(...cutout_builder.build());
         }
+      } else if (element.type === "pcb_copper_pour" && layer === element.layer) {
+        const glayer = glayers[getGerberLayerName(layer, "copper")];
+        const pour_builder = gerberBuilder().add("select_aperture", { aperture_number: 10 }).add("start_region_statement", {});
+        if (element.shape === "brep") {
+          const { brep_shape } = element;
+          if (!brep_shape) continue;
+          const { outer_ring, inner_rings } = brep_shape;
+          const drawRing = (ring) => {
+            if (!ring || ring.vertices.length === 0) return;
+            pour_builder.add("move_operation", {
+              x: ring.vertices[0].x,
+              y: mfy(ring.vertices[0].y)
+            });
+            const vertices_loop = [...ring.vertices, ring.vertices[0]];
+            for (let i = 0; i < vertices_loop.length - 1; i++) {
+              const start = vertices_loop[i];
+              const end = vertices_loop[i + 1];
+              if (start.bulge && Math.abs(start.bulge) > 1e-9) {
+                const bulge = (opts.flip_y_axis ? -1 : 1) * start.bulge;
+                if (bulge > 0) {
+                  pour_builder.add(
+                    "set_movement_mode_to_counterclockwise_circular",
+                    {}
+                  );
+                } else {
+                  pour_builder.add(
+                    "set_movement_mode_to_clockwise_circular",
+                    {}
+                  );
+                }
+                const p1 = { x: start.x, y: start.y };
+                const p2 = { x: end.x, y: end.y };
+                const dx = p2.x - p1.x;
+                const dy = p2.y - p1.y;
+                const d = Math.sqrt(dx * dx + dy * dy);
+                if (d < 1e-9) {
+                  pour_builder.add("set_movement_mode_to_linear", {});
+                  pour_builder.add("plot_operation", {
+                    x: end.x,
+                    y: mfy(end.y)
+                  });
+                  continue;
+                }
+                const abs_b = Math.abs(bulge);
+                const theta = 4 * Math.atan(abs_b);
+                if (Math.abs(Math.sin(theta / 2)) < 1e-9) {
+                  pour_builder.add("set_movement_mode_to_linear", {});
+                  pour_builder.add("plot_operation", {
+                    x: end.x,
+                    y: mfy(end.y)
+                  });
+                  continue;
+                }
+                const R = d / (2 * Math.sin(theta / 2));
+                const alpha = (Math.PI - theta) / 2;
+                const phi = Math.atan2(dy, dx);
+                const delta_angle = bulge > 0 ? alpha : -alpha;
+                const angle_p1_center = phi + delta_angle;
+                const Cx = p1.x + R * Math.cos(angle_p1_center);
+                const Cy = p1.y + R * Math.sin(angle_p1_center);
+                const i_offset = Cx - p1.x;
+                const j_offset = Cy - p1.y;
+                pour_builder.add("plot_operation", {
+                  x: end.x,
+                  y: mfy(end.y),
+                  i: i_offset,
+                  j: opts.flip_y_axis ? -j_offset : j_offset
+                });
+              } else {
+                pour_builder.add("set_movement_mode_to_linear", {});
+                pour_builder.add("plot_operation", { x: end.x, y: mfy(end.y) });
+              }
+            }
+          };
+          const reverseRing = (ring) => {
+            const { vertices } = ring;
+            if (!vertices || vertices.length === 0) return { vertices: [] };
+            const n = vertices.length;
+            const reversed_pts = [...vertices].reverse();
+            const new_vertices = reversed_pts.map((pt, i) => {
+              const bulge_v_idx = (n - 2 - i + n) % n;
+              const bulge = vertices[bulge_v_idx].bulge;
+              return { ...pt, bulge: bulge ? -bulge : void 0 };
+            });
+            return { vertices: new_vertices };
+          };
+          drawRing(reverseRing(outer_ring));
+          if (inner_rings) {
+            for (const inner_ring of inner_rings) {
+              drawRing(reverseRing(inner_ring));
+            }
+          }
+        } else if (element.shape === "rect") {
+          const { center, width, height, rotation } = element;
+          const w = width / 2;
+          const h = height / 2;
+          const points = [
+            { x: -w, y: h },
+            // Top-left
+            { x: w, y: h },
+            // Top-right
+            { x: w, y: -h },
+            // Bottom-right
+            { x: -w, y: -h }
+            // Bottom-left
+          ];
+          let transformMatrix = identity();
+          if (rotation) {
+            const angle_rad = rotation * Math.PI / 180;
+            transformMatrix = rotate(angle_rad);
+          }
+          transformMatrix = compose(
+            translate(center.x, center.y),
+            transformMatrix
+          );
+          const transformedPoints = points.map(
+            (p) => applyToPoint(transformMatrix, p)
+          );
+          pour_builder.add("move_operation", {
+            x: transformedPoints[0].x,
+            y: mfy(transformedPoints[0].y)
+          });
+          for (let i = 1; i < transformedPoints.length; i++) {
+            pour_builder.add("plot_operation", {
+              x: transformedPoints[i].x,
+              y: mfy(transformedPoints[i].y)
+            });
+          }
+          pour_builder.add("plot_operation", {
+            x: transformedPoints[0].x,
+            y: mfy(transformedPoints[0].y)
+          });
+        } else if (element.shape === "polygon") {
+          const { points } = element;
+          if (points.length > 0) {
+            pour_builder.add("move_operation", {
+              x: points[0].x,
+              y: mfy(points[0].y)
+            });
+            for (let i = 1; i < points.length; i++) {
+              pour_builder.add("plot_operation", {
+                x: points[i].x,
+                y: mfy(points[i].y)
+              });
+            }
+            pour_builder.add("plot_operation", {
+              x: points[0].x,
+              y: mfy(points[0].y)
+            });
+          }
+        }
+        pour_builder.add("end_region_statement", {});
+        glayer.push(...pour_builder.build());
       }
     }
   }
@@ -1987,4 +2149,4 @@ export {
   stringifyGerberCommands,
   convertSoupToGerberCommands
 };
-//# sourceMappingURL=chunk-S7RCL42B.js.map
+//# sourceMappingURL=chunk-GERIAHNJ.js.map

package/dist/chunk-GERIAHNJ.js.map

@@ -0,0 +1 @@
+{"version":3,"sources":["../src/excellon-drill/commands/FMAT.ts","../src/excellon-drill/define-excellon-drill-command.ts","../src/excellon-drill/commands/G00.ts","../src/excellon-drill/commands/G01.ts","../src/excellon-drill/commands/G05.ts","../src/excellon-drill/commands/G85.ts","../src/excellon-drill/commands/G90.ts","../src/excellon-drill/commands/M15.ts","../src/excellon-drill/commands/M16.ts","../src/excellon-drill/commands/M30.ts","../src/excellon-drill/commands/M48.ts","../src/excellon-drill/commands/M95.ts","../src/excellon-drill/commands/define_tool.ts","../src/excellon-drill/commands/drill_at.ts","../src/excellon-drill/commands/header_attribute.ts","../src/excellon-drill/commands/header_comment.ts","../src/excellon-drill/commands/rewind.ts","../src/excellon-drill/commands/unit_format.ts","../src/excellon-drill/commands/use_tool.ts","../src/excellon-drill/commands/aper_function_header.ts","../src/excellon-drill/commands/percent_sign.ts","../src/excellon-drill/any-excellon-drill-command-map.ts","../src/excellon-drill/stringify-excellon-drill.ts","../src/excellon-drill/excellon-drill-builder.ts","../src/excellon-drill/convert-soup-to-excellon-drill-commands.ts","../src/gerber/commands/add_attribute_on_aperture.ts","../src/gerber/define-gerber-command.ts","../src/gerber/commands/add_attribute_on_file.ts","../src/gerber/commands/add_attribute_on_object.ts","../src/gerber/commands/aperture_block.ts","../src/gerber/commands/comment.ts","../src/gerber/commands/create_arc.ts","../src/gerber/commands/define_aperture.ts","../src/gerber/commands/define_macro_aperture_template.ts","../src/gerber/commands/delete_attribute.ts","../src/gerber/commands/end_of_file.ts","../src/gerber/commands/end_region_statement.ts","../src/gerber/commands/flash_operation.ts","../src/gerber/stringify-gerber/get-gerber-coordinate-with-padding.ts","../src/gerber/commands/load_mirroring.ts","../src/gerber/commands/load_polarity.ts","../src/gerber/commands/load_rotation.ts","../src/gerber/commands/load_scaling.ts","../src/gerber/commands/move_operation.ts","../src/gerber/commands/plot_operation.ts","../src/gerber/commands/set_coordinate_format.ts","../src/gerber/commands/set_current_aperture_d_code.ts","../src/gerber/commands/set_movement_mode_to_clockwise_circular.ts","../src/gerber/commands/set_movement_mode_to_counterclockwise_circular.ts","../src/gerber/commands/set_movement_mode_to_linear.ts","../src/gerber/commands/set_unit.ts","../src/gerber/commands/start_region_statement.ts","../src/gerber/commands/step_and_repeat.ts","../src/gerber/commands/format_specification.ts","../src/gerber/commands/set_layer_polarity.ts","../src/gerber/commands/define_aperture_template.ts","../src/gerber/commands/select_aperture.ts","../src/gerber/any_gerber_command.ts","../src/gerber/gerber-builder.ts","../src/gerber/stringify-gerber/stringify-gerber-command.ts","../src/gerber/stringify-gerber/stringify-gerber-command-layers.ts","../src/gerber/stringify-gerber/stringify-gerber-commands.ts","../src/gerber/utils/pairs.ts","../src/gerber/convert-soup-to-gerber-commands/define-common-macros.ts","../src/gerber/convert-soup-to-gerber-commands/defineAperturesForLayer.ts","../src/gerber/convert-soup-to-gerber-commands/getAllTraceWidths.ts","../src/gerber/convert-soup-to-gerber-commands/findApertureNumber.ts","../package.json","../src/gerber/convert-soup-to-gerber-commands/getCommandHeaders.ts","../src/gerber/convert-soup-to-gerber-commands/getGerberLayerName.ts","../src/gerber/convert-soup-to-gerber-commands/index.ts"],"sourcesContent":["import { z } from \"zod\"\nimport { defineExcellonDrillCommand } from \"../define-excellon-drill-command\"\n\nexport const FMAT = defineExcellonDrillCommand({\n  command_code: \"FMAT\",\n  schema: z.object({\n    command_code: z.literal(\"FMAT\").default(\"FMAT\"),\n    format: z.number(),\n  }),\n  stringify: (c) => `FMAT,${c.format}`,\n})\n","import type { AnyZodObject, z } from \"zod\"\n\nexport interface ExcellonDrillCommandDef<\n  K extends string,\n  T extends AnyZodObject | z.ZodIntersection<any, any>,\n> {\n  command_code: K\n  schema: T\n  stringify: (c: z.infer<T>) => string\n}\n\nexport const defineExcellonDrillCommand = <\n  K extends string,\n  T extends AnyZodObject | z.ZodIntersection<any, any>,\n>({\n  command_code,\n  schema,\n  stringify,\n}: {\n  command_code: K\n  schema: T\n  stringify: (c: z.infer<T>) => string\n}): ExcellonDrillCommandDef<K, T> => {\n  return {\n    command_code,\n    schema,\n    stringify,\n  }\n}\n","import { z } from \"zod\"\nimport { defineExcellonDrillCommand } from \"../define-excellon-drill-command\"\n\n/**\n * Rapid move without drilling\n */\nexport const G00 = defineExcellonDrillCommand({\n  command_code: \"G00\",\n  schema: z.object({\n    command_code: z.literal(\"G00\").default(\"G00\"),\n  }),\n  stringify: () => \"G00\",\n})\n","import { z } from \"zod\"\nimport { defineExcellonDrillCommand } from \"../define-excellon-drill-command\"\n\n/**\n * Linear move with drilling\n */\nexport const G01 = defineExcellonDrillCommand({\n  command_code: \"G01\",\n  schema: z.object({\n    command_code: z.literal(\"G01\").default(\"G01\"),\n  }),\n  stringify: () => \"G01\",\n})\n","import { z } from \"zod\"\nimport { defineExcellonDrillCommand } from \"../define-excellon-drill-command\"\n\nexport const G05 = defineExcellonDrillCommand({\n  command_code: \"G05\",\n  schema: z.object({\n    command_code: z.literal(\"G05\").default(\"G05\"),\n  }),\n  stringify: () => \"G05\",\n})\n","import { z } from \"zod\"\nimport { defineExcellonDrillCommand } from \"../define-excellon-drill-command\"\n\nexport const G85 = defineExcellonDrillCommand({\n  command_code: \"G85\",\n  schema: z.object({\n    command_code: z.literal(\"G85\").default(\"G85\"),\n  }),\n  stringify: () => \"G85\",\n})\n","import { z } from \"zod\"\nimport { defineExcellonDrillCommand } from \"../define-excellon-drill-command\"\n\nexport const G90 = defineExcellonDrillCommand({\n  command_code: \"G90\",\n  schema: z.object({\n    command_code: z.literal(\"G90\").default(\"G90\"),\n  }),\n  stringify: () => \"G90\",\n})\n","import { z } from \"zod\"\nimport { defineExcellonDrillCommand } from \"../define-excellon-drill-command\"\n\n/**\n * Z-Axis Feed Down\n */\nexport const M15 = defineExcellonDrillCommand({\n  command_code: \"M15\",\n  schema: z.object({\n    command_code: z.literal(\"M15\").default(\"M15\"),\n  }),\n  stringify: () => \"M15\",\n})\n","import { z } from \"zod\"\nimport { defineExcellonDrillCommand } from \"../define-excellon-drill-command\"\n\n/**\n * Z-Axis Feed Up (lift drill up)\n */\nexport const M16 = defineExcellonDrillCommand({\n  command_code: \"M16\",\n  schema: z.object({\n    command_code: z.literal(\"M16\").default(\"M16\"),\n  }),\n  stringify: () => \"M16\",\n})\n","import { z } from \"zod\"\nimport { defineExcellonDrillCommand } from \"../define-excellon-drill-command\"\n\nexport const M30 = defineExcellonDrillCommand({\n  command_code: \"M30\",\n  schema: z.object({\n    command_code: z.literal(\"M30\").default(\"M30\"),\n  }),\n  stringify: () => \"M30\",\n})\n","import { z } from \"zod\"\nimport { defineExcellonDrillCommand } from \"../define-excellon-drill-command\"\n\nexport const M48 = defineExcellonDrillCommand({\n  command_code: \"M48\",\n  schema: z.object({\n    command_code: z.literal(\"M48\").default(\"M48\"),\n  }),\n  stringify: () => \"M48\",\n})\n","import { z } from \"zod\"\nimport { defineExcellonDrillCommand } from \"../define-excellon-drill-command\"\n\nexport const M95 = defineExcellonDrillCommand({\n  command_code: \"M95\",\n  schema: z.object({\n    command_code: z.literal(\"M95\").default(\"M95\"),\n  }),\n  stringify: () => \"M95\",\n})\n","import { z } from \"zod\"\nimport { defineExcellonDrillCommand } from \"../define-excellon-drill-command\"\n\nexport const define_tool = defineExcellonDrillCommand({\n  command_code: \"define_tool\",\n  schema: z.object({\n    command_code: z.literal(\"define_tool\").default(\"define_tool\"),\n    tool_number: z.number(),\n    diameter: z.number(),\n  }),\n  stringify: (c) => `T${c.tool_number}C${c.diameter.toFixed(6)}`,\n})\n","import { z } from \"zod\"\nimport { defineExcellonDrillCommand } from \"../define-excellon-drill-command\"\n\nexport const drill_at = defineExcellonDrillCommand({\n  command_code: \"drill_at\",\n  schema: z.object({\n    command_code: z.literal(\"drill_at\").default(\"drill_at\"),\n    x: z.number(),\n    y: z.number(),\n  }),\n  stringify: (c) => `X${c.x.toFixed(4)}Y${c.y.toFixed(4)}`,\n})\n","import { z } from \"zod\"\nimport { defineExcellonDrillCommand } from \"../define-excellon-drill-command\"\n\nexport const header_attribute = defineExcellonDrillCommand({\n  command_code: \"header_attribute\",\n  schema: z.object({\n    command_code: z.literal(\"header_attribute\").default(\"header_attribute\"),\n    attribute_name: z.string(),\n    attribute_value: z.string(),\n  }),\n  stringify({ attribute_name, attribute_value }) {\n    return `; #@! ${attribute_name},${attribute_value}`\n  },\n})\n","import { z } from \"zod\"\nimport { defineExcellonDrillCommand } from \"../define-excellon-drill-command\"\n\nexport const header_comment = defineExcellonDrillCommand({\n  command_code: \"header_comment\",\n  schema: z.object({\n    command_code: z.literal(\"header_comment\").default(\"header_comment\"),\n    text: z.string(),\n  }),\n  stringify({ text }) {\n    return `; ${text}`\n  },\n})\n","import { z } from \"zod\"\nimport { defineExcellonDrillCommand } from \"../define-excellon-drill-command\"\n\nexport const rewind = defineExcellonDrillCommand({\n  command_code: \"rewind\",\n  schema: z.object({\n    command_code: z.literal(\"rewind\").default(\"rewind\"),\n  }),\n  stringify: () => \"%\",\n})\n","import { z } from \"zod\"\nimport { defineExcellonDrillCommand } from \"../define-excellon-drill-command\"\n\nexport const unit_format = defineExcellonDrillCommand({\n  command_code: \"unit_format\",\n  schema: z.object({\n    command_code: z.literal(\"unit_format\").default(\"unit_format\"),\n    unit: z.union([z.literal(\"INCH\"), z.literal(\"METRIC\")]),\n    lz: z\n      .union([z.literal(\"LZ\"), z.literal(\"TZ\")])\n      .nullable()\n      .default(null),\n  }),\n  stringify(c) {\n    return `${c.unit}${!c.lz ? \"\" : `,${c.lz}`}`\n  },\n})\n","import { z } from \"zod\"\nimport { defineExcellonDrillCommand } from \"../define-excellon-drill-command\"\n\nexport const use_tool = defineExcellonDrillCommand({\n  command_code: \"use_tool\",\n  schema: z.object({\n    command_code: z.literal(\"use_tool\").default(\"use_tool\"),\n    tool_number: z.number(),\n  }),\n  stringify: (c) => `T${c.tool_number}`,\n})\n","import { z } from \"zod\"\nimport { defineExcellonDrillCommand } from \"../define-excellon-drill-command\"\n\nexport const aper_function_header = defineExcellonDrillCommand({\n  command_code: \"aper_function_header\",\n  schema: z.object({\n    command_code: z\n      .literal(\"aper_function_header\")\n      .default(\"aper_function_header\"),\n    is_plated: z.boolean(),\n  }),\n  stringify({ is_plated }) {\n    if (!is_plated) {\n      throw new Error(\"not implemented\")\n    }\n    return \"; #@! TA.AperFunction,Plated,PTH,ComponentDrill\"\n  },\n})\n","import { z } from \"zod\"\nimport { defineExcellonDrillCommand } from \"../define-excellon-drill-command\"\n\nexport const percent_sign = defineExcellonDrillCommand({\n  command_code: \"percent_sign\",\n  schema: z.object({\n    command_code: z.literal(\"percent_sign\").default(\"percent_sign\"),\n  }),\n  stringify: () => \"%\",\n})\n","import type { z } from \"zod\"\nimport type { ExcellonDrillCommandDef } from \"./define-excellon-drill-command\"\nimport * as EDCMD from \"./commands\"\n\nexport const excellon_drill_command_map = {\n  G00: EDCMD.G00,\n  G01: EDCMD.G01,\n  G85: EDCMD.G85,\n  M48: EDCMD.M48,\n  M95: EDCMD.M95,\n  FMAT: EDCMD.FMAT,\n  unit_format: EDCMD.unit_format,\n  aper_function_header: EDCMD.aper_function_header,\n  percent_sign: EDCMD.percent_sign,\n  T: EDCMD.define_tool,\n  define_tool: EDCMD.define_tool,\n  use_tool: EDCMD.use_tool,\n  G90: EDCMD.G90,\n  G05: EDCMD.G05,\n  M15: EDCMD.M15,\n  M16: EDCMD.M16,\n  M30: EDCMD.M30,\n  drill_at: EDCMD.drill_at,\n  header_comment: EDCMD.header_comment,\n  header_attribute: EDCMD.header_attribute,\n  rewind: EDCMD.rewind,\n} satisfies Record<string, ExcellonDrillCommandDef<string, any>>\n\nexport type AnyExcellonDrillCommand = z.infer<\n  (typeof excellon_drill_command_map)[keyof typeof excellon_drill_command_map][\"schema\"]\n>\n","import {\n  type AnyExcellonDrillCommand,\n  excellon_drill_command_map,\n} from \"./any-excellon-drill-command-map\"\n\nexport const stringifyExcellonDrill = (\n  commands: Array<AnyExcellonDrillCommand>,\n) => {\n  return commands\n    .map((c) => {\n      const def = excellon_drill_command_map[c.command_code]\n      return def.stringify(c as any)\n    })\n    .join(\"\\n\")\n}\n","import type { z } from \"zod\"\nimport {\n  type AnyExcellonDrillCommand,\n  excellon_drill_command_map,\n} from \"./any-excellon-drill-command-map\"\n\nclass ExcellonDrillBuilder {\n  commands: Array<AnyExcellonDrillCommand>\n\n  constructor() {\n    this.commands = []\n  }\n\n  add<T extends keyof typeof excellon_drill_command_map>(\n    cmd: T,\n    props: z.input<(typeof excellon_drill_command_map)[T][\"schema\"]>,\n  ): ExcellonDrillBuilder {\n    this.commands.push({\n      ...({\n        command_code: excellon_drill_command_map[cmd].command_code,\n      } as any),\n      ...props,\n    })\n    return this\n  }\n\n  build(): Array<AnyExcellonDrillCommand> {\n    return this.commands\n  }\n}\n\nexport const excellonDrill = () => new ExcellonDrillBuilder()\n","import type { AnyCircuitElement } from \"circuit-json\"\nimport type { AnyExcellonDrillCommand } from \"./any-excellon-drill-command-map\"\nimport { excellonDrill } from \"./excellon-drill-builder\"\n\nexport const convertSoupToExcellonDrillCommands = ({\n  circuitJson,\n  is_plated,\n  flip_y_axis = false,\n}: {\n  circuitJson: Array<AnyCircuitElement>\n  is_plated: boolean\n  flip_y_axis?: boolean\n}): Array<AnyExcellonDrillCommand> => {\n  const builder = excellonDrill()\n\n  // Start sequence commands\n  builder.add(\"M48\", {})\n\n  // Add header comments\n  const date_str = new Date().toISOString()\n  builder\n    .add(\"header_comment\", {\n      text: `DRILL file {tscircuit} date ${date_str}`,\n    })\n    .add(\"header_comment\", {\n      text: \"FORMAT={-:-/ absolute / metric / decimal}\",\n    })\n    .add(\"header_attribute\", {\n      attribute_name: \"TF.CreationDate\",\n      attribute_value: date_str,\n    })\n    .add(\"header_attribute\", {\n      attribute_name: \"TF.GenerationSoftware\",\n      attribute_value: \"tscircuit\",\n    })\n    .add(\"header_attribute\", {\n      attribute_name: \"TF.FileFunction\",\n      attribute_value: \"Plated,1,2,PTH\",\n    })\n    .add(\"FMAT\", { format: 2 }) // Assuming format 2 for the example\n    .add(\"unit_format\", { unit: \"METRIC\", lz: null })\n\n  let tool_counter = 10 // Start tool numbering from 10 for example\n\n  const diameterToToolNumber: Record<number, number> = {}\n\n  // Define tools\n  for (const element of circuitJson) {\n    if (\n      element.type === \"pcb_plated_hole\" ||\n      element.type === \"pcb_hole\" ||\n      element.type === \"pcb_via\"\n    ) {\n      let hole_diameter: number | undefined\n\n      if (\"hole_diameter\" in element) {\n        hole_diameter = element.hole_diameter\n      } else if (\n        element.type === \"pcb_plated_hole\" &&\n        element.shape === \"pill\"\n      ) {\n        // For pill shapes, use the minimum dimension as the hole diameter\n        hole_diameter = Math.min(element.hole_width, element.hole_height)\n      }\n\n      if (!hole_diameter) continue\n\n      if (!diameterToToolNumber[hole_diameter]) {\n        builder.add(\"aper_function_header\", {\n          is_plated: true,\n        })\n        builder.add(\"define_tool\", {\n          tool_number: tool_counter,\n          diameter: hole_diameter,\n        })\n        diameterToToolNumber[hole_diameter] = tool_counter\n        tool_counter++\n      }\n    }\n  }\n\n  builder.add(\"percent_sign\", {})\n  builder.add(\"G90\", {})\n  builder.add(\"G05\", {})\n\n  // Execute drills for tool N\n  for (let i = 10; i < tool_counter; i++) {\n    builder.add(\"use_tool\", { tool_number: i })\n    for (const element of circuitJson) {\n      if (\n        element.type === \"pcb_plated_hole\" ||\n        element.type === \"pcb_hole\" ||\n        element.type === \"pcb_via\"\n      ) {\n        if (\n          !is_plated &&\n          (element.type === \"pcb_plated_hole\" || element.type === \"pcb_via\")\n        )\n          continue\n        let hole_diameter: number | undefined\n\n        if (\"hole_diameter\" in element) {\n          hole_diameter = element.hole_diameter\n        }\n\n        if (element.type === \"pcb_plated_hole\" && element.shape === \"pill\") {\n          hole_diameter = Math.min(element.hole_width, element.hole_height)\n\n          // For pill shapes, we need to route the hole\n          if (diameterToToolNumber[hole_diameter] === i) {\n            const y_multiplier = flip_y_axis ? -1 : 1\n\n            if (element.hole_width > element.hole_height) {\n              // Horizontal pill\n              const offset = (element.hole_width - element.hole_height) / 2\n              builder\n                .add(\"G00\", {})\n                .add(\"drill_at\", {\n                  x: element.x - offset,\n                  y: element.y * y_multiplier,\n                })\n                .add(\"M15\", {})\n                .add(\"G01\", {})\n                .add(\"drill_at\", {\n                  x: element.x + offset,\n                  y: element.y * y_multiplier,\n                })\n                .add(\"M16\", {})\n                .add(\"G05\", {})\n            } else {\n              // Vertical pill\n              const offset = (element.hole_height - element.hole_width) / 2\n              builder\n                .add(\"G00\", {})\n                .add(\"drill_at\", {\n                  x: element.x,\n                  y: (element.y - offset) * y_multiplier,\n                })\n                .add(\"M15\", {})\n                .add(\"G01\", {})\n                .add(\"drill_at\", {\n                  x: element.x,\n                  y: (element.y + offset) * y_multiplier,\n                })\n                .add(\"M16\", {})\n                .add(\"G05\", {})\n            }\n          }\n        } else if (!hole_diameter) continue\n        else if (diameterToToolNumber[hole_diameter] === i) {\n          builder.add(\"drill_at\", {\n            x: element.x,\n            y: element.y * (flip_y_axis ? -1 : 1),\n          })\n        }\n      }\n    }\n  }\n\n  builder.add(\"M30\", {})\n\n  return builder.build()\n}\n","import { z } from \"zod\"\nimport { defineGerberCommand } from \"../define-gerber-command\"\n\nexport const add_attribute_on_aperture = defineGerberCommand({\n  command_code: \"TA\",\n  schema: z\n    .object({\n      command_code: z.literal(\"TA\").default(\"TA\"),\n      attribute_name: z.string(),\n      attribute_value: z.string(),\n    })\n    .describe(\n      \"Add attribute on aperture: Add an aperture attribute to the dictionary or modify it.\",\n    ),\n  stringify: ({ attribute_name, attribute_value }) => {\n    return `%TA${attribute_name},${attribute_value}*%`\n  },\n})\n","import type { AnyZodObject, z, ZodObject, ZodUnion } from \"zod\"\n\nexport interface GerberCommandDef<\n  K extends string,\n  T extends AnyZodObject | z.ZodIntersection<any, any>,\n> {\n  command_code: K\n  schema: T\n  stringify: (c: z.infer<T>) => string\n}\n\nexport const defineGerberCommand = <\n  K extends string,\n  T extends AnyZodObject | z.ZodIntersection<any, any>,\n>({\n  command_code,\n  schema,\n  stringify,\n}: {\n  command_code: K\n  schema: T\n  stringify: (c: z.infer<T>) => string\n}): GerberCommandDef<K, T> => {\n  return {\n    command_code,\n    schema,\n    stringify,\n  }\n}\n","import { z } from \"zod\"\nimport { defineGerberCommand } from \"../define-gerber-command\"\n\nexport const add_attribute_on_file = defineGerberCommand({\n  command_code: \"TF\",\n  schema: z\n    .object({\n      command_code: z.literal(\"TF\").default(\"TF\"),\n      attribute_name: z.string(),\n      attribute_value: z.string(),\n    })\n    .describe(\"Add attribute on file: Set a file attribute.\"),\n  stringify: ({ attribute_name, attribute_value }) => {\n    return `%TF.${attribute_name},${attribute_value}*%`\n  },\n})\n","import { z } from \"zod\"\nimport { defineGerberCommand } from \"../define-gerber-command\"\n\nexport const add_attribute_on_object = defineGerberCommand({\n  command_code: \"TO\",\n  schema: z\n    .object({\n      command_code: z.literal(\"TO\").default(\"TO\"),\n      attribute_name: z.string(),\n      attribute_value: z.string(),\n    })\n    .describe(\n      \"Add attribute on object: Add an object attribute to the dictionary or modify it.\",\n    ),\n  stringify: ({ attribute_name, attribute_value }) => {\n    return `%TO${attribute_name},${attribute_value}*%`\n  },\n})\n\nexport type AddAttributeOnObject = z.infer<\n  typeof add_attribute_on_object.schema\n>\n","import { z } from \"zod\"\nimport { defineGerberCommand } from \"../define-gerber-command\"\n\nexport const aperture_block = defineGerberCommand({\n  command_code: \"AB\",\n  schema: z\n    .object({\n      command_code: z.literal(\"AB\").default(\"AB\"),\n      block: z.string(),\n    })\n    .describe(\n      \"Aperture block: Opens a block aperture statement and assigns its aperture number or closes a block aperture statement\",\n    ),\n  stringify() {\n    return \"\"\n  },\n})\n\nexport type ApertureBlock = z.infer<typeof aperture_block.schema>\n","import { z } from \"zod\"\nimport { defineGerberCommand } from \"../define-gerber-command\"\n\nexport const comment = defineGerberCommand({\n  command_code: \"G04\",\n  schema: z\n    .object({\n      command_code: z.literal(\"G04\").default(\"G04\"),\n      comment: z.string(),\n    })\n    .describe(\n      \"Comment: A human readable comment, does not affect the image. 4.1\",\n    ),\n  stringify: (c) => {\n    return `G04 ${c.comment}*`\n  },\n})\n\nexport type Comment = z.infer<typeof comment.schema>\n","import { z } from \"zod\"\nimport { defineGerberCommand } from \"../define-gerber-command\"\n\nexport const create_arc = defineGerberCommand({\n  command_code: \"G75\",\n  schema: z\n    .object({\n      command_code: z.literal(\"G75\").default(\"G75\"),\n    })\n    .describe(\n      \"Create arc: A G75 must be called before creating the first arc.\",\n    ),\n  stringify() {\n    return \"G75*\"\n  },\n})\n\nexport type CreateArc = z.infer<typeof create_arc.schema>\n","import { z } from \"zod\"\nimport { defineGerberCommand } from \"../define-gerber-command\"\n\nexport const define_aperture = defineGerberCommand({\n  command_code: \"AD\",\n  schema: z\n    .object({\n      command_code: z.literal(\"AD\").default(\"AD\"),\n      aperture_code: z.string(),\n    })\n    .describe(\n      \"Aperture define: Defines a template-based aperture, assigns a D code to it. 4.3\",\n    ),\n  stringify() {\n    return \"\"\n  },\n})\n\nexport type DefineAperture = z.infer<typeof define_aperture.schema>\n","import { z } from \"zod\"\nimport { defineGerberCommand } from \"../define-gerber-command\"\n\nexport const define_macro_aperture_template = defineGerberCommand({\n  command_code: \"AM\",\n  schema: z\n    .object({\n      command_code: z.literal(\"AM\").default(\"AM\"),\n      macro_name: z.string(),\n      template_code: z.string(),\n    })\n    .describe(\"Aperture macro: Defines a macro aperture template. 4.5\"),\n  stringify({ macro_name, template_code }) {\n    return `%AM${macro_name}*\\n${template_code}%`\n  },\n})\n\nexport type DefineMacroApertureTemplate = z.infer<\n  typeof define_macro_aperture_template.schema\n>\n","import { z } from \"zod\"\nimport { defineGerberCommand } from \"../define-gerber-command\"\n\nexport const delete_attribute = defineGerberCommand({\n  command_code: \"TD\",\n  schema: z\n    .object({\n      command_code: z.literal(\"TD\").default(\"TD\"),\n      attribute: z.string().optional(),\n    })\n    .describe(\n      \"Delete attribute: Attribute delete Delete one or all attributes in the dictionary.\",\n    ),\n  stringify({ attribute }) {\n    if (!attribute) {\n      return \"%TD*%\"\n    }\n    return `%TD${attribute}*%`\n  },\n})\n","import { z } from \"zod\"\nimport { defineGerberCommand } from \"../define-gerber-command\"\n\nexport const end_of_file = defineGerberCommand({\n  command_code: \"M02\",\n  schema: z\n    .object({\n      command_code: z.literal(\"M02\").default(\"M02\"),\n    })\n    .describe(\"End of file: 4.13\"),\n  stringify() {\n    return \"M02*\"\n  },\n})\n","import { z } from \"zod\"\nimport { defineGerberCommand } from \"../define-gerber-command\"\n\nexport const end_region_statement = defineGerberCommand({\n  command_code: \"G37\",\n  schema: z\n    .object({\n      command_code: z.literal(\"G37\").default(\"G37\"),\n    })\n    .describe(\"End region statement: Ends the region statement\"),\n  stringify() {\n    return \"G37*\"\n  },\n})\n\nexport type EndRegionStatement = z.infer<typeof end_region_statement.schema>\n","import { z } from \"zod\"\nimport { defineGerberCommand } from \"../define-gerber-command\"\nimport { getGerberCoordinateWithPadding } from \"../stringify-gerber/get-gerber-coordinate-with-padding\"\n\nexport const flash_operation = defineGerberCommand({\n  command_code: \"D03\",\n  schema: z\n    .object({\n      command_code: z.literal(\"D03\").default(\"D03\"),\n      x: z.number(),\n      y: z.number(),\n    })\n    .describe(\n      \"Flash operation: Creates a flash object with the current aperture. The current point is moved to the flash point.\",\n    ),\n  stringify({ x, y }) {\n    const [gx, gy] = [x, y].map((coord) =>\n      getGerberCoordinateWithPadding(coord),\n    )\n    return `X${gx}Y${gy}D03*`\n  },\n})\n\nexport type FlashOperation = z.infer<typeof flash_operation.schema>\n","/**\n * Retrieves the Gerber coordinate with padding.\n *\n * Example Gerber coordinate strings:\n * full string: X110550000Y-85000000D03*\n * formatted coordinate for X: 110550000\n *\n * Example inputs/outputs:\n * input: 110.55\n * output: 110550000\n *\n * @param coordinate_mm - The coordinate value in millimeters.\n * @returns The Gerber coordinate with padding.\n */\nexport const getGerberCoordinateWithPadding = (\n  coordinate_mm: number,\n): string => {\n  const coordinate_um = coordinate_mm * 1000000 // Convert millimeters to micrometers\n  let coordinate_str = coordinate_um.toFixed(0) // Convert to string without decimal places\n  // add left padding\n  while (coordinate_str.length < 9) {\n    if (coordinate_um < 0) {\n      coordinate_str = `-0${coordinate_str.slice(1)}`\n    } else {\n      coordinate_str = `0${coordinate_str}`\n    }\n  }\n  return coordinate_str\n}\n","import { z } from \"zod\"\n\nexport const load_mirroring = z\n  .object({\n    command_code: z.literal(\"LM\"),\n    mirroring: z.string(),\n  })\n  .describe(\"Load mirroring: Loads the mirror object transformation parameter.\")\n\nexport type LoadMirroring = z.infer<typeof load_mirroring>\n","import { z } from \"zod\"\n\nexport const load_polarity = z\n  .object({\n    command_code: z.literal(\"LP\"),\n    polarity: z.string(),\n  })\n  .describe(\n    \"Load polarity: Loads the polarity object transformation parameter.\",\n  )\n\nexport type LoadPolarity = z.infer<typeof load_polarity>\n","import { z } from \"zod\"\nimport { defineGerberCommand } from \"../define-gerber-command\"\n\nexport const load_rotation = defineGerberCommand({\n  command_code: \"LR\",\n  schema: z\n    .object({\n      command_code: z.literal(\"LR\").default(\"LR\"),\n      rotation_degrees: z.number(),\n    })\n    .describe(\n      \"Load rotation: Loads the rotation object transformation parameter.\",\n    ),\n  stringify: ({ rotation_degrees }) => {\n    return `%LR${rotation_degrees}*%`\n  },\n})\n\nexport type LoadRotation = z.infer<typeof load_rotation.schema>\n","import { z } from \"zod\"\n\nexport const load_scaling = z\n  .object({\n    command_code: z.literal(\"LS\"),\n    scaling: z.string(),\n  })\n  .describe(\"Load scaling: Loads the scale object transformation parameter.\")\n\nexport type LoadScaling = z.infer<typeof load_scaling>\n","import { getGerberCoordinateWithPadding } from \"./../stringify-gerber/get-gerber-coordinate-with-padding\"\nimport { z } from \"zod\"\nimport { defineGerberCommand } from \"../define-gerber-command\"\n\nexport const move_operation = defineGerberCommand({\n  command_code: \"D02\",\n  schema: z\n    .object({\n      command_code: z.literal(\"D02\").default(\"D02\"),\n      x: z.number(),\n      y: z.number(),\n    })\n    .describe(\n      \"Move operation: D02 moves the current point to the coordinate in the command. It does not create an object.\",\n    ),\n  stringify({ x, y }) {\n    const [gx, gy] = [x, y].map((coord) =>\n      getGerberCoordinateWithPadding(coord),\n    )\n    return `X${gx}Y${gy}D02*`\n  },\n})\n","import { z } from \"zod\"\nimport { defineGerberCommand } from \"../define-gerber-command\"\nimport { getGerberCoordinateWithPadding } from \"../stringify-gerber/get-gerber-coordinate-with-padding\"\n\nexport const plot_operation = defineGerberCommand({\n  command_code: \"D01\",\n  schema: z\n    .object({\n      command_code: z.literal(\"D01\").default(\"D01\"),\n      x: z.number(),\n      y: z.number(),\n      i: z.number().optional(),\n      j: z.number().optional(),\n    })\n    .describe(\n      \"Plot operation: Outside a region statement D01 creates a draw or arc object with the current aperture. Inside it adds a draw/arc segment to the contour under construction. The current point is moved to draw/arc end point after the creation of the draw/arc.\",\n    ),\n  stringify({ x, y, i, j }) {\n    const gx = getGerberCoordinateWithPadding(x)\n    const gy = getGerberCoordinateWithPadding(y)\n    let cmd = `X${gx}Y${gy}`\n    if (i !== undefined && j !== undefined) {\n      const gi = getGerberCoordinateWithPadding(i)\n      const gj = getGerberCoordinateWithPadding(j)\n      cmd += `I${gi}J${gj}`\n    }\n    return `${cmd}D01*`\n  },\n})\n","import { z } from \"zod\"\n\nexport const set_coordinate_format = z\n  .object({\n    command_code: z.literal(\"FS\"),\n    format: z.string(),\n  })\n  .describe(\"Sets the coordinate format, e.g. the number of decimals.\")\nexport type SetCoordinateFormat = z.infer<typeof set_coordinate_format>\n","import { z } from \"zod\"\n\nexport const set_current_aperture_d_code = z\n  .object({\n    command_code: z.literal(\"Dnn\"),\n    d_code: z.string(),\n  })\n  .describe(\"(nn≥10) Sets the current aperture to D code nn. 4.6\")\n\nexport type SetCurrentApertureDCode = z.infer<\n  typeof set_current_aperture_d_code\n>\n","import { z } from \"zod\"\nimport { defineGerberCommand } from \"../define-gerber-command\"\n\nexport const set_movement_mode_to_clockwise_circular = defineGerberCommand({\n  command_code: \"G02\",\n  schema: z\n    .object({\n      command_code: z.literal(\"G02\").default(\"G02\"),\n    })\n    .describe(\n      \"Set movement mode to clockwise circular: Sets linear/circular mode to clockwise circular.\",\n    ),\n  stringify() {\n    return \"G02*\"\n  },\n})\n","import { z } from \"zod\"\nimport { defineGerberCommand } from \"../define-gerber-command\"\n\nexport const set_movement_mode_to_counterclockwise_circular =\n  defineGerberCommand({\n    command_code: \"G03\", // Add the missing command_code property\n    schema: z\n      .object({\n        command_code: z.literal(\"G03\").default(\"G03\"),\n      })\n      .describe(\n        \"Set movement mode to counterclockwise circular: Sets linear/circular mode to counterclockwise circular.\",\n      ),\n    stringify() {\n      return \"G03*\"\n    },\n  })\n","import { z } from \"zod\"\nimport { defineGerberCommand } from \"../define-gerber-command\"\n\nexport const set_movement_mode_to_linear = defineGerberCommand({\n  command_code: \"G01\",\n  schema: z\n    .object({\n      command_code: z.literal(\"G01\").default(\"G01\"),\n    })\n    .describe(\n      \"Set movement mode to linear: Sets linear/circular mode to linear.\",\n    ),\n  stringify() {\n    return \"G01*\"\n  },\n})\n","import { z } from \"zod\"\nimport { defineGerberCommand } from \"../define-gerber-command\"\n\nexport const set_unit = defineGerberCommand({\n  command_code: \"MO\",\n  schema: z\n    .object({\n      command_code: z.literal(\"MO\").default(\"MO\"),\n      unit: z.enum([\"MM\", \"in\"]),\n    })\n    .describe(\"Mode: Sets the unit to mm or inch. 4.2.1\"),\n  stringify({ unit }) {\n    return `%MO${unit}*%`\n  },\n})\n","import { z } from \"zod\"\nimport { defineGerberCommand } from \"../define-gerber-command\"\n\nexport const start_region_statement = defineGerberCommand({\n  command_code: \"G36\",\n  schema: z\n    .object({\n      command_code: z.literal(\"G36\").default(\"G36\"),\n    })\n    .describe(\n      \"Start region statement: Starts a region statement which creates a region by defining its contours.\",\n    ),\n  stringify() {\n    return \"G36*\"\n  },\n})\n\nexport type StartRegionStatement = z.infer<typeof start_region_statement.schema>\n","import { z } from \"zod\"\n\nexport const step_and_repeat = z\n  .object({\n    command_code: z.literal(\"SR\"),\n    statement: z.string(),\n  })\n  .describe(\"Step and repeat: Open or closes a step and repeat statement.\")\n\nexport type StepAndRepeat = z.infer<typeof step_and_repeat>\n","import { z } from \"zod\"\nimport { defineGerberCommand } from \"../define-gerber-command\"\n\nexport const format_specification = defineGerberCommand({\n  command_code: \"FS\",\n  schema: z.object({\n    command_code: z.literal(\"FS\").default(\"FS\"),\n    zero_omission_mode: z\n      .union([z.literal(\"L\").describe(\"leading zeros omitted\"), z.literal(\"T\")])\n      .nullable()\n      .default(null),\n    coordinate_notation: z\n      .union([\n        z.literal(\"A\").describe(\"absolute notation\"),\n        z.literal(\"I\").describe(\"incremental notation\"),\n      ])\n      .default(\"A\"),\n    x_integer_digits: z.number().int().default(4),\n    x_decimal_digits: z.number().int().default(6),\n    y_integer_digits: z.number().int().default(4),\n    y_decimal_digits: z.number().int().default(6),\n  }),\n  stringify: () => {\n    return \"%FSLAX46Y46*%\"\n  },\n})\n\nexport type FormatSpecification = z.infer<typeof format_specification.schema>\n","import { z } from \"zod\"\nimport { defineGerberCommand } from \"../define-gerber-command\"\n\nexport const set_layer_polarity = defineGerberCommand({\n  command_code: \"LP\",\n  schema: z\n    .object({\n      command_code: z.literal(\"LP\").default(\"LP\"),\n      polarity: z.enum([\"D\", \"C\"]),\n    })\n    .describe(\n      \"Layer Polarity: Sets the layer polarity to dark or clear. 4.2.1\",\n    ),\n  stringify({ polarity }) {\n    return `%LP${polarity}*%`\n  },\n})\n","import { z } from \"zod\"\nimport { defineGerberCommand } from \"../define-gerber-command\"\nimport { getGerberCoordinateWithPadding } from \"../stringify-gerber/get-gerber-coordinate-with-padding\"\n\nconst circle_template = z.object({\n  standard_template_code: z.literal(\"C\").describe(\"circle\"),\n  diameter: z.number(),\n  hole_diameter: z.number().optional(),\n})\n\nconst rectangle_template = z.object({\n  standard_template_code: z.literal(\"R\").describe(\"rectangle\"),\n  x_size: z.number(),\n  y_size: z.number(),\n  hole_diameter: z.number().optional(),\n})\n\nconst obround_template = z.object({\n  standard_template_code: z.literal(\"O\").describe(\"obround\"),\n  x_size: z.number(),\n  y_size: z.number(),\n  hole_diameter: z.number().optional(),\n})\n\nconst polygon_template = z.object({\n  standard_template_code: z.literal(\"P\").describe(\"polygon\"),\n  outer_diameter: z.number(),\n  number_of_vertices: z.number().int(),\n  rotation: z.number().optional(),\n  hole_diameter: z.number().optional(),\n})\n\nconst standard_aperture_template_config = z.discriminatedUnion(\n  \"standard_template_code\",\n  [circle_template, rectangle_template, obround_template, polygon_template],\n)\n\nconst horz_pill_template = z.object({\n  macro_name: z.literal(\"HORZPILL\"),\n  x_size: z.number(),\n  y_size: z.number(),\n  circle_diameter: z.number(),\n  circle_center_offset: z.number(),\n})\n\nconst vert_pill_template = z.object({\n  macro_name: z.literal(\"VERTPILL\"),\n  x_size: z.number(),\n  y_size: z.number(),\n  circle_diameter: z.number(),\n  circle_center_offset: z.number(),\n})\n\nconst roundrect_template = z.object({\n  macro_name: z.literal(\"ROUNDRECT\"),\n  corner_radius: z.number(),\n  corner_1_x: z.number(),\n  corner_1_y: z.number(),\n  corner_2_x: z.number(),\n  corner_2_y: z.number(),\n  corner_3_x: z.number(),\n  corner_3_y: z.number(),\n  corner_4_x: z.number(),\n  corner_4_y: z.number(),\n})\n\nconst macro_aperture_template_config = z.discriminatedUnion(\"macro_name\", [\n  horz_pill_template,\n  vert_pill_template,\n  roundrect_template,\n])\n\nconst aperture_template_config = z.union([\n  standard_aperture_template_config,\n  macro_aperture_template_config,\n])\n\nexport const define_aperture_template = defineGerberCommand({\n  command_code: \"ADD\",\n  schema: aperture_template_config.and(\n    z.object({\n      command_code: z.literal(\"ADD\").default(\"ADD\"),\n      aperture_number: z.number().int(),\n    }),\n  ),\n  stringify(props) {\n    if (\"macro_name\" in props) {\n      const { aperture_number, macro_name } = props\n      let commandString = `%ADD${aperture_number}${macro_name},`\n\n      if (macro_name === \"HORZPILL\" || macro_name === \"VERTPILL\") {\n        commandString += `${props.x_size.toFixed(6)}X${props.y_size.toFixed(6)}X${props.circle_diameter.toFixed(6)}X${props.circle_center_offset.toFixed(6)}`\n      } else if (macro_name === \"ROUNDRECT\") {\n        // Handle ROUNDRECT if needed\n        throw new Error(\"ROUNDRECT macro not implemented yet\")\n      }\n\n      commandString += \"*%\"\n      return commandString\n    }\n    if (\"standard_template_code\" in props) {\n      const { aperture_number, standard_template_code } = props\n      let commandString = `%ADD${aperture_number}${standard_template_code},`\n\n      if (standard_template_code === \"C\") {\n        commandString += `${props.diameter.toFixed(6)}`\n      } else if (\n        standard_template_code === \"R\" ||\n        standard_template_code === \"O\"\n      ) {\n        commandString += `${props.x_size.toFixed(6)}X${props.y_size.toFixed(6)}`\n      } else if (standard_template_code === \"P\") {\n        commandString += `${props.outer_diameter}X${props.number_of_vertices}X${\n          props.rotation ? `X${props.rotation}` : \"\"\n        }`\n      }\n\n      if (props.hole_diameter) {\n        commandString += `X${props.hole_diameter.toFixed(6)}`\n      }\n\n      commandString += \"*%\"\n\n      return commandString\n    }\n    throw new Error(\n      `Invalid aperture template config: ${JSON.stringify(props)}`,\n    )\n  },\n})\n\nexport type DefineAperatureTemplateCommand = z.infer<\n  typeof define_aperture_template.schema\n>\n\nexport type ApertureTemplateConfig = z.infer<typeof aperture_template_config>\n","import { z } from \"zod\"\nimport { defineGerberCommand } from \"../define-gerber-command\"\n\nexport const select_aperture = defineGerberCommand({\n  command_code: \"D\",\n  schema: z.object({\n    command_code: z.literal(\"D\").default(\"D\"),\n    aperture_number: z.number().int(),\n  }),\n  stringify({ aperture_number }) {\n    return `D${aperture_number}*`\n  },\n})\n","import type { GerberCommandDef } from \"./define-gerber-command\"\nimport type { z } from \"zod\"\n\nimport { add_attribute_on_aperture } from \"./commands/add_attribute_on_aperture\"\nimport { add_attribute_on_file } from \"./commands/add_attribute_on_file\"\nimport { add_attribute_on_object } from \"./commands/add_attribute_on_object\"\nimport { aperture_block } from \"./commands/aperture_block\"\nimport { comment } from \"./commands/comment\"\nimport { create_arc } from \"./commands/create_arc\"\nimport { define_aperture } from \"./commands/define_aperture\"\nimport { define_macro_aperture_template } from \"./commands/define_macro_aperture_template\"\nimport { delete_attribute } from \"./commands/delete_attribute\"\nimport { end_of_file } from \"./commands/end_of_file\"\nimport { end_region_statement } from \"./commands/end_region_statement\"\nimport { flash_operation } from \"./commands/flash_operation\"\nimport { load_mirroring } from \"./commands/load_mirroring\"\nimport { load_polarity } from \"./commands/load_polarity\"\nimport { load_rotation } from \"./commands/load_rotation\"\nimport { load_scaling } from \"./commands/load_scaling\"\nimport { move_operation } from \"./commands/move_operation\"\nimport { plot_operation } from \"./commands/plot_operation\"\nimport { set_coordinate_format } from \"./commands/set_coordinate_format\"\nimport { set_current_aperture_d_code } from \"./commands/set_current_aperture_d_code\"\nimport { set_movement_mode_to_clockwise_circular } from \"./commands/set_movement_mode_to_clockwise_circular\"\nimport { set_movement_mode_to_counterclockwise_circular } from \"./commands/set_movement_mode_to_counterclockwise_circular\"\nimport { set_movement_mode_to_linear } from \"./commands/set_movement_mode_to_linear\"\nimport { set_unit } from \"./commands/set_unit\"\nimport { start_region_statement } from \"./commands/start_region_statement\"\nimport { step_and_repeat } from \"./commands/step_and_repeat\"\nimport { format_specification } from \"./commands/format_specification\"\nimport { set_layer_polarity } from \"./commands/set_layer_polarity\"\nimport { define_aperture_template } from \"./commands/define_aperture_template\"\nimport { select_aperture } from \"./commands/select_aperture\"\n\nexport const gerber_command_map = {\n  add_attribute_on_aperture,\n  add_attribute_on_file,\n  add_attribute_on_object,\n  aperture_block,\n  comment,\n  create_arc,\n  define_aperture,\n  define_macro_aperture_template,\n  delete_attribute,\n  end_of_file,\n  move_operation,\n  flash_operation,\n  end_region_statement,\n  format_specification,\n  // load_mirroring,\n  // load_polarity,\n  load_rotation,\n  // load_scaling,\n  plot_operation,\n  // set_coordinate_format,\n  // set_current_aperture_d_code,\n  define_aperture_template,\n  set_movement_mode_to_clockwise_circular,\n  set_movement_mode_to_counterclockwise_circular,\n  set_movement_mode_to_linear,\n  select_aperture,\n  set_unit,\n  set_layer_polarity,\n  start_region_statement,\n  // step_and_repeat,\n} as const satisfies Record<string, GerberCommandDef<any, any>>\n\nexport type AnyGerberCommand = z.infer<\n  (typeof gerber_command_map)[keyof typeof gerber_command_map][\"schema\"]\n>\n","import type { AnyGerberCommand } from \"./any_gerber_command\"\nimport type { z } from \"zod\"\nimport { gerber_command_map } from \"./any_gerber_command\"\n\nexport const gerberBuilder = () => new GerberBuilder()\n\nclass GerberBuilder {\n  commands: Array<AnyGerberCommand>\n\n  constructor() {\n    this.commands = []\n  }\n\n  $if(\n    condition: boolean,\n    fn: (gb: GerberBuilder) => GerberBuilder,\n  ): GerberBuilder {\n    if (condition) {\n      return fn(this)\n    }\n    return this\n  }\n\n  add<T extends keyof typeof gerber_command_map>(\n    cmd: T,\n    props: z.input<(typeof gerber_command_map)[T][\"schema\"]>,\n  ): GerberBuilder {\n    this.commands.push({\n      ...({ command_code: gerber_command_map[cmd].command_code } as any),\n      ...props,\n    })\n    return this\n  }\n\n  build(): Array<AnyGerberCommand> {\n    return this.commands\n  }\n}\n\n// Type test:\n// gerber()\n//   .add(\"add_attribute_on_aperture\", {\n//     attribute_name: \"foo\",\n//     attribute_value: \"bar\",\n//   })\n//   .add(\"end_of_file\", {})\n//   .build()\n","import type { AnyGerberCommand } from \"../any_gerber_command\"\nimport { gerber_command_map } from \"../any_gerber_command\"\n\nexport const stringifyGerberCommand = (command: AnyGerberCommand): string => {\n  const command_def = Object.values(gerber_command_map).find(\n    (cmd) => cmd.command_code === command.command_code,\n  )\n\n  if (!command_def) {\n    throw new Error(\n      `Command for command_code:\"${command.command_code}\" not found`,\n    )\n  }\n\n  if (!command_def.stringify) {\n    throw new Error(\n      `Command for command_code:\"${command.command_code}\" does not have a stringify method`,\n    )\n  }\n\n  return command_def.stringify(command as any)\n}\n","import type { AnyGerberCommand } from \"../any_gerber_command\"\nimport type { GerberLayerName } from \"../convert-soup-to-gerber-commands/GerberLayerName\"\nimport { stringifyGerberCommand } from \"./stringify-gerber-command\"\n\nexport const stringifyGerberCommandLayers = (\n  commandLayers: Record<GerberLayerName, AnyGerberCommand[]>,\n): Record<GerberLayerName, string> => {\n  const stringifiedCommandLayers: Record<GerberLayerName, string> = {} as any\n  for (const layerName of Object.keys(commandLayers) as GerberLayerName[]) {\n    stringifiedCommandLayers[layerName] = commandLayers[layerName]\n      .map((command) => {\n        return stringifyGerberCommand(command)\n      })\n      .join(\"\\n\")\n  }\n  return stringifiedCommandLayers\n}\n","import type { AnyGerberCommand } from \"../any_gerber_command\"\nimport { stringifyGerberCommand } from \"./stringify-gerber-command\"\n\nexport const stringifyGerberCommands = (\n  commands: AnyGerberCommand[],\n): string => {\n  return commands\n    .map((command) => {\n      return stringifyGerberCommand(command)\n    })\n    .join(\"\\n\")\n}\n","/**\n * Return pairs of adjacent elements in an array.\n */\nexport function pairs<T>(arr: Array<T>): Array<[T, T]> {\n  const result: Array<[T, T]> = []\n  for (let i = 0; i < arr.length - 1; i++) {\n    result.push([arr[i], arr[i + 1]])\n  }\n  return result\n}\n","import type { AnyGerberCommand } from \"../any_gerber_command\"\nimport { gerberBuilder } from \"../gerber-builder\"\n\nexport const defineCommonMacros = (glayer: Array<AnyGerberCommand>) => {\n  glayer.push(\n    ...gerberBuilder()\n      .add(\"comment\", { comment: \"APERTURE MACROS START\" })\n      .add(\"define_macro_aperture_template\", {\n        macro_name: \"HORZPILL\",\n        template_code: `\n0 Horizontal pill (stadium) shape macro*\n0 Parameters:*\n0 $1 = Total width*\n0 $2 = Total height*\n0 $3 = Circle diameter (equal to height)*\n0 $4 = Circle center offset\n0 21 = Center Line(Exposure, Width, Height, Center X, Center Y, Rotation)*\n0 1 = Circle(Exposure, Diameter, Center X, Center Y, Rotation)*\n21,1,$1,$2,0.0,0.0,0.0*\n1,1,$3,0.0-$4,0.0*\n1,1,$3,$4,0.0*\n`.trim(),\n      })\n      .add(\"define_macro_aperture_template\", {\n        macro_name: \"VERTPILL\",\n        template_code: `\n0 Vertical pill (stadium) shape macro*\n0 Parameters:*\n0 $1 = Total width*\n0 $2 = Total height*\n0 $3 = Circle diameter (equal to width)*\n0 $4 = Circle center offset\n0 21 = Center Line(Exposure, Width, Height, Center X, Center Y, Rotation)*\n21,1,$1,$2,0.0,0.0,0.0*\n1,1,$3,0.0,0.0-$4*\n1,1,$3,0.0,$4*\n`.trim(),\n      })\n      .add(\"define_macro_aperture_template\", {\n        macro_name: \"RoundRect\",\n        template_code: `\n0 Rectangle with rounded corners*\n0 $1 Corner radius*\n0 $2 $3 $4 $5 $6 $7 $8 $9 X,Y Position of each corner*\n0 Polygon box body*\n4,1,4,$2,$3,$4,$5,$6,$7,$8,$9,$2,$3,0*\n0 Circles for rounded corners*\n1,1,$1+$1,$2,$3*\n1,1,$1+$1,$4,$5*\n1,1,$1+$1,$6,$7*\n1,1,$1+$1,$8,$9*\n0 Rectangles between the rounded corners*\n20,1,$1+$1,$2,$3,$4,$5,0*\n20,1,$1+$1,$4,$5,$6,$7,0*\n20,1,$1+$1,$6,$7,$8,$9,0*\n20,1,$1+$1,$8,$9,$2,$3,0*\n`.trim(),\n      })\n      .add(\"comment\", { comment: \"APERTURE MACROS END\" })\n      .build(),\n  )\n}\n","import type {\n  PCBHole,\n  LayerRef,\n  PCBPlatedHole,\n  PCBSMTPad,\n  PcbVia,\n  PcbHole,\n  PcbSolderPaste,\n  PcbSilkscreenPath,\n  PcbSilkscreenText,\n} from \"circuit-json\"\nimport stableStringify from \"fast-json-stable-stringify\"\nimport type { AnyGerberCommand } from \"../any_gerber_command\"\nimport type { ApertureTemplateConfig } from \"../commands/define_aperture_template\"\nimport { gerberBuilder } from \"../gerber-builder\"\nimport type { GerberLayerName } from \"./GerberLayerName\"\nimport { getAllTraceWidths } from \"./getAllTraceWidths\"\nimport type { AnyCircuitElement } from \"circuit-json\"\n\nexport function defineAperturesForLayer({\n  glayer,\n  soup,\n  glayer_name,\n}: {\n  glayer: AnyGerberCommand[]\n  soup: AnyCircuitElement[]\n  glayer_name: GerberLayerName\n}) {\n  const getNextApertureNumber = () => {\n    const highest_aperture_number = glayer.reduce((acc, command) => {\n      if (command.command_code === \"ADD\") {\n        return Math.max(acc, command.aperture_number)\n      }\n      return acc\n    }, 0)\n    if (highest_aperture_number === 0) {\n      return 10\n    }\n    return highest_aperture_number + 1\n  }\n\n  glayer.push(\n    ...gerberBuilder()\n      .add(\"comment\", { comment: \"aperture START LIST\" })\n      .build(),\n  )\n\n  // Add all trace width apertures\n  const traceWidths: Record<LayerRef, number[]> = getAllTraceWidths(soup)\n  for (const width of traceWidths[\n    glayer_name.startsWith(\"F_\") ? \"top\" : \"bottom\"\n  ]) {\n    glayer.push(\n      ...gerberBuilder()\n        .add(\"define_aperture_template\", {\n          aperture_number: getNextApertureNumber(),\n          standard_template_code: \"C\",\n          diameter: width,\n        })\n        .build(),\n    )\n  }\n\n  // Add all pcb smtpad, plated hole etc. aperatures\n  const apertureConfigs = getAllApertureTemplateConfigsForLayer(\n    soup,\n    glayer_name.startsWith(\"F_\") ? \"top\" : \"bottom\",\n  )\n\n  for (const apertureConfig of apertureConfigs) {\n    glayer.push(\n      ...gerberBuilder()\n        .add(\"define_aperture_template\", {\n          aperture_number: getNextApertureNumber(),\n          ...apertureConfig,\n        })\n        .build(),\n    )\n  }\n\n  glayer.push(\n    ...gerberBuilder()\n      .add(\"delete_attribute\", {})\n      .add(\"comment\", { comment: \"aperture END LIST\" })\n      .build(),\n  )\n}\n\nexport const getApertureConfigFromPcbSmtpad = (\n  elm: PCBSMTPad,\n): ApertureTemplateConfig => {\n  if (elm.shape === \"rect\") {\n    return {\n      standard_template_code: \"R\",\n      x_size: elm.width,\n      y_size: elm.height,\n    }\n  }\n  if (elm.shape === \"circle\") {\n    return {\n      standard_template_code: \"C\",\n      diameter: elm.radius * 2,\n    }\n  }\n  if (elm.shape === \"rotated_rect\") {\n    // Rotation is handled by the LR command, not the aperture definition\n    return {\n      standard_template_code: \"R\",\n      x_size: elm.width,\n      y_size: elm.height,\n    }\n  }\n  throw new Error(`Unsupported shape ${(elm as any).shape}`)\n}\n\nexport const getApertureConfigFromPcbSilkscreenPath = (\n  elm: PcbSilkscreenPath,\n): ApertureTemplateConfig => {\n  if (\"stroke_width\" in elm) {\n    return {\n      standard_template_code: \"C\",\n      diameter: elm.stroke_width,\n    }\n  }\n  throw new Error(`Provide stroke_width for: ${elm as any}`)\n}\n\nexport const getApertureConfigFromPcbSilkscreenText = (\n  elm: PcbSilkscreenText,\n): ApertureTemplateConfig => {\n  if (\"font_size\" in elm) {\n    return {\n      standard_template_code: \"C\",\n      diameter: elm.font_size / 8, // font size and diamater have different units of measurement\n    }\n  }\n  throw new Error(`Provide font_size for: ${elm as any}`)\n}\n\nexport const getApertureConfigFromPcbSolderPaste = (\n  elm: PcbSolderPaste,\n): ApertureTemplateConfig => {\n  if (elm.shape === \"rect\") {\n    return {\n      standard_template_code: \"R\",\n      x_size: elm.width,\n      y_size: elm.height,\n    }\n  }\n  if (elm.shape === \"rotated_rect\") {\n    // Rotation is handled by the LR command, not the aperture definition\n    return {\n      standard_template_code: \"R\",\n      x_size: elm.width,\n      y_size: elm.height,\n    }\n  }\n  if (elm.shape === \"circle\") {\n    return {\n      standard_template_code: \"C\",\n      diameter: elm.radius * 2,\n    }\n  }\n  if (elm.shape === \"pill\") {\n    if (!(\"width\" in elm && \"height\" in elm)) {\n      throw new Error(\n        \"Invalid pill shape in getApertureConfigFromPcbPlatedHole: missing dimensions\",\n      )\n    }\n    if (elm.width >= elm.height) {\n      return {\n        macro_name: \"HORZPILL\",\n        x_size: elm.width,\n        y_size: elm.height,\n        circle_diameter: Math.min(elm.width, elm.height),\n        circle_center_offset: elm.width / 2,\n      }\n    }\n    return {\n      macro_name: \"VERTPILL\",\n      x_size: elm.width,\n      y_size: elm.height,\n      circle_diameter: Math.min(elm.width, elm.height),\n      circle_center_offset: elm.height / 2,\n    }\n  }\n  throw new Error(`Unsupported shape ${(elm as any).shape}`)\n}\n\nexport const getApertureConfigFromPcbPlatedHole = (\n  elm: PCBPlatedHole,\n): ApertureTemplateConfig => {\n  if (elm.shape === \"circle\") {\n    if (!(\"outer_diameter\" in elm && \"hole_diameter\" in elm)) {\n      throw new Error(\n        \"Invalid circle shape in getApertureConfigFromPcbPlatedHole: missing diameters\",\n      )\n    }\n    return {\n      standard_template_code: \"C\",\n      diameter: elm.outer_diameter,\n    }\n  }\n  if (elm.shape === \"pill\") {\n    if (!(\"outer_width\" in elm && \"outer_height\" in elm)) {\n      throw new Error(\n        \"Invalid pill shape in getApertureConfigFromPcbPlatedHole: missing dimensions\",\n      )\n    }\n\n    if (elm.outer_width > elm.outer_height) {\n      return {\n        macro_name: \"HORZPILL\",\n        x_size: elm.outer_width,\n        y_size: elm.outer_height,\n        circle_diameter: Math.min(elm.outer_width, elm.outer_height),\n        circle_center_offset: elm.outer_width / 2,\n      }\n    }\n    return {\n      macro_name: \"VERTPILL\",\n      x_size: elm.outer_width,\n      y_size: elm.outer_height,\n      circle_diameter: Math.min(elm.outer_width, elm.outer_height),\n      circle_center_offset: elm.outer_height / 2,\n    }\n  }\n  if (elm.shape === \"circular_hole_with_rect_pad\") {\n    if (!(\"rect_pad_width\" in elm && \"rect_pad_height\" in elm)) {\n      throw new Error(\n        \"Invalid circular_hole_with_rect_pad shape in getApertureConfigFromPcbPlatedHole: missing dimensions\",\n      )\n    }\n    return {\n      standard_template_code: \"R\",\n      x_size: elm.rect_pad_width,\n      y_size: elm.rect_pad_height,\n    }\n  }\n  throw new Error(\n    `Unsupported shape in getApertureConfigFromPcbPlatedHole: ${elm.shape}`,\n  )\n}\n\nexport const getApertureConfigFromCirclePcbHole = (\n  elm: PcbHole,\n): ApertureTemplateConfig => {\n  if (!(\"hole_diameter\" in elm)) {\n    throw new Error(\n      `Invalid shape called in getApertureConfigFromCirclePcbHole: ${elm.hole_shape}`,\n    )\n  }\n  return {\n    standard_template_code: \"C\",\n    diameter: elm.hole_diameter,\n  }\n}\n\nexport const getApertureConfigFromPcbVia = (\n  elm: PcbVia,\n): ApertureTemplateConfig => {\n  if (!(\"outer_diameter\" in elm)) {\n    throw new Error(\n      \"outer_diameter not specified in getApertureConfigFromPcbVia\",\n    )\n  }\n  return {\n    standard_template_code: \"C\",\n    diameter: elm.outer_diameter,\n  }\n}\n\nfunction getAllApertureTemplateConfigsForLayer(\n  soup: AnyCircuitElement[],\n  layer: \"top\" | \"bottom\",\n): ApertureTemplateConfig[] {\n  const configs: ApertureTemplateConfig[] = []\n  const configHashMap = new Set<string>()\n\n  const addConfigIfNew = (config: ApertureTemplateConfig) => {\n    const hash = stableStringify(config)\n    if (!configHashMap.has(hash)) {\n      configs.push(config)\n      configHashMap.add(hash)\n    }\n  }\n\n  for (const elm of soup) {\n    if (elm.type === \"pcb_smtpad\") {\n      if (elm.layer === layer) {\n        addConfigIfNew(getApertureConfigFromPcbSmtpad(elm))\n      }\n    } else if (elm.type === \"pcb_solder_paste\") {\n      if (elm.layer === layer) {\n        addConfigIfNew(getApertureConfigFromPcbSolderPaste(elm))\n      }\n    } else if (elm.type === \"pcb_plated_hole\") {\n      if (elm.layers.includes(layer)) {\n        addConfigIfNew(getApertureConfigFromPcbPlatedHole(elm))\n      }\n    } else if (elm.type === \"pcb_hole\") {\n      if (elm.hole_shape === \"circle\")\n        addConfigIfNew(getApertureConfigFromCirclePcbHole(elm))\n      else console.warn(\"NOT IMPLEMENTED: drawing gerber for non circle holes\")\n    } else if (elm.type === \"pcb_via\") {\n      addConfigIfNew(getApertureConfigFromPcbVia(elm))\n    } else if (elm.type === \"pcb_silkscreen_path\")\n      addConfigIfNew(getApertureConfigFromPcbSilkscreenPath(elm))\n    else if (elm.type === \"pcb_silkscreen_text\")\n      addConfigIfNew(getApertureConfigFromPcbSilkscreenText(elm))\n  }\n\n  return configs\n}\n","import type { AnyCircuitElement, LayerRef, PCBTrace } from \"circuit-json\"\n\nexport function getAllTraceWidths(\n  soup: AnyCircuitElement[],\n): Record<LayerRef, number[]> {\n  const pcb_traces = soup.filter(\n    (elm): elm is PCBTrace => elm.type === \"pcb_trace\",\n  )\n\n  const widths: Record<LayerRef, Set<number>> = {} as any\n\n  for (const trace of pcb_traces) {\n    for (const segment of trace.route) {\n      if (segment.route_type === \"wire\") {\n        widths[segment.layer] = widths[segment.layer] || new Set<number>()\n        widths[segment.layer].add(segment.width)\n      }\n    }\n  }\n\n  return {\n    top: Array.from(widths.top || []),\n    bottom: Array.from(widths.bottom || []),\n  } as any\n}\n","import type {\n  ApertureTemplateConfig,\n  DefineAperatureTemplateCommand,\n} from \"../commands/define_aperture_template\"\nimport type { AnyGerberCommand } from \"../any_gerber_command\"\n\nexport const findApertureNumber = (\n  glayer: AnyGerberCommand[],\n  search_params:\n    | {\n        trace_width?: number\n      }\n    | ApertureTemplateConfig,\n): number => {\n  let aperture: any\n  if (\"trace_width\" in search_params) {\n    const trace_width = search_params.trace_width\n    aperture = glayer.find(\n      (command): command is DefineAperatureTemplateCommand =>\n        \"standard_template_code\" in command &&\n        command.command_code === \"ADD\" &&\n        command.standard_template_code === \"C\" &&\n        command.diameter === trace_width,\n    )\n  } else if (\n    \"standard_template_code\" in search_params ||\n    \"macro_name\" in search_params\n  ) {\n    aperture = glayer.find(\n      (command): command is DefineAperatureTemplateCommand =>\n        command.command_code === \"ADD\" &&\n        Object.keys(search_params).every(\n          (param_name) =>\n            command[param_name as keyof typeof search_params] ===\n            search_params[param_name as keyof typeof search_params],\n        ),\n    )\n  }\n\n  if (!aperture) {\n    // TODO add FileFunction/layer name to this error to help narrow it\n    throw new Error(\n      `Aperture not found for search params ${JSON.stringify(search_params)}`,\n    )\n  }\n  return aperture.aperture_number\n}\n","{\n  \"name\": \"circuit-json-to-gerber\",\n  \"version\": \"0.0.31\",\n  \"main\": \"dist/index.js\",\n  \"type\": \"module\",\n  \"scripts\": {\n    \"build\": \"tsup-node src/index.ts src/cli.ts --format esm --dts --sourcemap\",\n    \"format\": \"biome format --write .\",\n    \"format:check\": \"biome format .\"\n  },\n  \"files\": [\n    \"dist\"\n  ],\n  \"bin\": {\n    \"circuit-to-gerber\": \"./dist/cli.js\"\n  },\n  \"devDependencies\": {\n    \"@biomejs/biome\": \"^1.8.3\",\n    \"@types/archiver\": \"^6.0.3\",\n    \"@types/bun\": \"^1.1.8\",\n    \"@types/node\": \"^22.5.2\",\n    \"archiver\": \"^7.0.1\",\n    \"react\": \"^19.1.0\",\n    \"@types/react\": \"^19.1.8\",\n    \"bun-match-svg\": \"^0.0.13\",\n    \"commander\": \"^12.1.0\",\n    \"gerber-to-svg\": \"^4.2.8\",\n    \"pcb-stackup\": \"^4.2.8\",\n    \"tsup\": \"^8.2.4\",\n    \"tscircuit\": \"^0.0.643\"\n  },\n  \"peerDependencies\": {\n    \"typescript\": \"^5.0.0\",\n    \"tscircuit\": \"*\"\n  },\n  \"dependencies\": {\n    \"@tscircuit/alphabet\": \"^0.0.2\",\n    \"fast-json-stable-stringify\": \"^2.1.0\",\n    \"transformation-matrix\": \"^3.0.0\"\n  }\n}\n","import type { AnyGerberCommand } from \"src/gerber/any_gerber_command\"\nimport { gerberBuilder } from \"../gerber-builder\"\nimport packageJson from \"../../../package.json\"\n\nconst layerAndTypeToFileFunction = {\n  \"top-copper\": \"Copper,L1,Top\",\n  \"bottom-copper\": \"Copper,L2,Bot\",\n  \"top-soldermask\": \"Soldermask,Top\",\n  \"bottom-soldermask\": \"Soldermask,Bot\",\n  \"top-silkscreen\": \"Legend,Top\",\n  \"bottom-silkscreen\": \"Legend,Bot\",\n  \"top-paste\": \"Paste,Top\",\n  \"bottom-paste\": \"Paste,Bot\",\n  edgecut: \"Profile,NP\",\n  // TODO inner layers\n}\n\n/**\n * Returns headers for a Gerber file. Here's a typical header:\n *\n * %TF.GenerationSoftware,KiCad,Pcbnew,8.0.1*%\n * %TF.CreationDate,2024-04-08T11:14:22-07:00*%\n * %TF.ProjectId,,58585858-5858-4585-9858-585858585858,rev?*%\n * %TF.SameCoordinates,Original*%\n * %TF.FileFunction,Copper,L1,Top*%\n * %TF.FilePolarity,Positive*%\n * %FSLAX46Y46*%\n * G04 Gerber Fmt 4.6, Leading zero omitted, Abs format (unit mm)*\n * G04 Created by KiCad (PCBNEW 8.0.1) date 2024-04-08 11:14:22*\n * %MOMM*%\n * %LPD*%\n */\nexport const getCommandHeaders = (opts: {\n  layer:\n    | \"edgecut\"\n    | \"top\"\n    | \"bottom\"\n    | \"inner1\"\n    | \"inner2\"\n    | \"inner3\"\n    | \"inner4\"\n  layer_type?: \"copper\" | \"soldermask\" | \"silkscreen\" | \"paste\"\n}): AnyGerberCommand[] => {\n  const file_function =\n    layerAndTypeToFileFunction[\n      (opts.layer_type\n        ? `${opts.layer}-${opts.layer_type}`\n        : opts.layer) as keyof typeof layerAndTypeToFileFunction\n    ]\n  return (\n    gerberBuilder()\n      .add(\"add_attribute_on_file\", {\n        attribute_name: \"GenerationSoftware\",\n        attribute_value: `tscircuit,circuit-json-to-gerber,${packageJson.version}`,\n      })\n      .add(\"add_attribute_on_file\", {\n        attribute_name: \"CreationDate\",\n        attribute_value: new Date().toISOString(),\n      })\n      // .add(\"add_attribute_on_file\", {\n      //   attribute_name: \"ProjectId\",\n      //   attribute_value: \"\",\n      // })\n      .add(\"add_attribute_on_file\", {\n        attribute_name: \"SameCoordinates\",\n        attribute_value: \"Original\",\n      })\n      .add(\"add_attribute_on_file\", {\n        attribute_name: \"FileFunction\",\n        attribute_value: file_function,\n      })\n      .$if(opts.layer !== \"edgecut\", (gb) =>\n        gb.add(\"add_attribute_on_file\", {\n          attribute_name: \"FilePolarity\",\n          attribute_value:\n            opts.layer_type === \"soldermask\" ? \"Negative\" : \"Positive\",\n        }),\n      )\n      .add(\"format_specification\", {})\n      .add(\"set_unit\", {\n        unit: \"MM\",\n      })\n      .add(\"comment\", {\n        comment: \"Gerber Fmt 4.6, Leading zero omitted, Abs format (unit mm)\",\n      })\n      .add(\"comment\", {\n        comment: `Created by tscircuit (builder) date ${new Date().toISOString()}`,\n      })\n      .add(\"set_movement_mode_to_linear\", {})\n      .add(\"set_layer_polarity\", {\n        polarity: \"D\",\n      })\n      .add(\"create_arc\", {})\n      .build()\n  )\n}\n","import type { LayerRef } from \"circuit-json\"\nimport type { GerberLayerName } from \"./GerberLayerName\"\n\nconst layerRefToGerberPrefix = {\n  top: \"F_\",\n  bottom: \"B_\",\n} as const\nconst layerTypeToGerberSuffix = {\n  copper: \"Cu\",\n  silkscreen: \"SilkScreen\",\n  soldermask: \"Mask\",\n  mask: \"Mask\",\n  paste: \"Paste\",\n} as const\n\nexport const getGerberLayerName = (\n  layer_ref: LayerRef | \"edgecut\",\n  layer_type: \"copper\" | \"silkscreen\" | \"soldermask\" | \"paste\",\n): GerberLayerName => {\n  if (layer_ref === \"edgecut\") return \"Edge_Cuts\"\n  return `${layerRefToGerberPrefix[layer_ref as keyof typeof layerRefToGerberPrefix]}${layerTypeToGerberSuffix[layer_type]}`\n}\n","import type { AnyCircuitElement } from \"circuit-json\"\nimport { pairs } from \"../utils/pairs\"\nimport { gerberBuilder } from \"../gerber-builder\"\nimport type { LayerToGerberCommandsMap } from \"./GerberLayerName\"\nimport { defineCommonMacros } from \"./define-common-macros\"\nimport {\n  defineAperturesForLayer,\n  getApertureConfigFromCirclePcbHole,\n  getApertureConfigFromPcbPlatedHole,\n  getApertureConfigFromPcbSilkscreenPath,\n  getApertureConfigFromPcbSilkscreenText,\n  getApertureConfigFromPcbSmtpad,\n  getApertureConfigFromPcbSolderPaste,\n  getApertureConfigFromPcbVia,\n} from \"./defineAperturesForLayer\"\nimport type { PcbCutout } from \"circuit-json\"\nimport { findApertureNumber } from \"./findApertureNumber\"\nimport { getCommandHeaders } from \"./getCommandHeaders\"\nimport { getGerberLayerName } from \"./getGerberLayerName\"\nimport { lineAlphabet } from \"@tscircuit/alphabet\"\nimport {\n  applyToPoint,\n  compose,\n  identity,\n  rotate,\n  translate,\n  type Matrix,\n} from \"transformation-matrix\"\n\n/**\n * Converts tscircuit soup to arrays of Gerber commands for each layer\n */\nexport const convertSoupToGerberCommands = (\n  soup: AnyCircuitElement[],\n  opts: { flip_y_axis?: boolean } = {},\n): LayerToGerberCommandsMap => {\n  opts.flip_y_axis ??= false\n  const glayers: LayerToGerberCommandsMap = {\n    F_Cu: getCommandHeaders({\n      layer: \"top\",\n      layer_type: \"copper\",\n    }),\n    F_SilkScreen: getCommandHeaders({\n      layer: \"top\",\n      layer_type: \"silkscreen\",\n    }),\n    F_Mask: getCommandHeaders({\n      layer: \"top\",\n      layer_type: \"soldermask\",\n    }),\n    F_Paste: getCommandHeaders({\n      layer: \"top\",\n      layer_type: \"paste\",\n    }),\n    B_Cu: getCommandHeaders({\n      layer: \"bottom\",\n      layer_type: \"copper\",\n    }),\n    B_SilkScreen: getCommandHeaders({\n      layer: \"bottom\",\n      layer_type: \"silkscreen\",\n    }),\n    B_Mask: getCommandHeaders({\n      layer: \"bottom\",\n      layer_type: \"soldermask\",\n    }),\n    B_Paste: getCommandHeaders({\n      layer: \"bottom\",\n      layer_type: \"paste\",\n    }),\n    Edge_Cuts: getCommandHeaders({\n      layer: \"edgecut\",\n    }),\n  }\n\n  for (const glayer_name of [\n    \"F_Cu\",\n    \"B_Cu\",\n    \"F_Mask\",\n    \"B_Mask\",\n    \"F_Paste\",\n    \"B_Paste\",\n    \"F_SilkScreen\",\n    \"B_SilkScreen\",\n  ] as const) {\n    const glayer = glayers[glayer_name]\n    defineCommonMacros(glayer)\n    defineAperturesForLayer({\n      soup,\n      glayer,\n      glayer_name,\n    })\n  }\n\n  // Edgecuts has a single aperature\n  glayers.Edge_Cuts.push(\n    ...gerberBuilder()\n      .add(\"define_aperture_template\", {\n        aperture_number: 10,\n        standard_template_code: \"C\",\n        diameter: 0.05, //mm\n      })\n      .build(),\n  )\n\n  /**\n   * \"maybe flip y axis\" to handle y axis negating\n   */\n  const mfy = (y: number) => (opts.flip_y_axis ? -y : y)\n\n  for (const layer of [\"top\", \"bottom\", \"edgecut\"] as const) {\n    for (const element of soup) {\n      if (element.type === \"pcb_trace\") {\n        const { route } = element\n        for (const [a, b] of pairs(route)) {\n          // TODO b kind of matters here, this doesn't handle a bunch of cases\n          // but the definition of a route is also kind of broken, a \"wire\" is\n          // a relationship between two points and can't really be a type of\n          // point\n          if (a.route_type === \"wire\") {\n            if (a.layer === layer) {\n              const glayer = glayers[getGerberLayerName(layer, \"copper\")]\n              glayer.push(\n                ...gerberBuilder()\n                  .add(\"select_aperture\", {\n                    aperture_number: findApertureNumber(glayer, {\n                      trace_width: a.width,\n                    }),\n                  })\n                  .add(\"move_operation\", { x: a.x, y: mfy(a.y) })\n                  .add(\"plot_operation\", { x: b.x, y: mfy(b.y) })\n                  .build(),\n              )\n            }\n          }\n        }\n      } else if (element.type === \"pcb_silkscreen_path\") {\n        if (element.layer === layer) {\n          const glayer = glayers[getGerberLayerName(layer, \"silkscreen\")]\n          const apertureConfig = getApertureConfigFromPcbSilkscreenPath(element)\n          const gerber = gerberBuilder().add(\"select_aperture\", {\n            aperture_number: findApertureNumber(glayer, apertureConfig),\n          })\n          // Move to the first point\n          if (element.route.length > 0) {\n            gerber.add(\"move_operation\", {\n              x: element.route[0].x,\n              y: mfy(element.route[0].y),\n            })\n          }\n\n          // Plot lines to subsequent points\n          for (let i = 1; i < element.route.length; i++) {\n            gerber.add(\"plot_operation\", {\n              x: element.route[i].x,\n              y: mfy(element.route[i].y),\n            })\n          }\n\n          glayer.push(...gerber.build())\n        }\n      } else if (element.type === \"pcb_silkscreen_text\") {\n        if (element.layer === layer) {\n          // The acctual Uppercase letters are 70% of the font size\n          // sources: https://forum.generic-mapping-tools.org/t/what-exactly-is-the-custom-font-s-height-point-size-ratio/1265/2?utm_source=chatgpt.com\n          const CAP_HEIGHT_SCALE = 0.7 // Adjust based on your font's metrics\n          const glayer = glayers[getGerberLayerName(layer, \"silkscreen\")]\n          const apertureConfig = getApertureConfigFromPcbSilkscreenText(element)\n          const gerber = gerberBuilder().add(\"select_aperture\", {\n            aperture_number: findApertureNumber(glayer, apertureConfig),\n          })\n\n          let initialX = element.anchor_position.x\n          let initialY = element.anchor_position.y\n          const fontSize = element.font_size * CAP_HEIGHT_SCALE\n          const letterSpacing = fontSize * 0.4\n          const spaceWidth = fontSize * 0.5\n\n          const textWidth =\n            element.text.split(\"\").reduce((width, char) => {\n              if (char === \" \") {\n                return width + spaceWidth + letterSpacing\n              }\n              return width + fontSize + letterSpacing\n            }, 0) - letterSpacing\n\n          const textHeight = fontSize\n\n          const anchorAlignment =\n            element.anchor_alignment ||\n            (():\n              | \"top_center\"\n              | \"bottom_center\"\n              | \"center_left\"\n              | \"center_right\"\n              | undefined => {\n              const side = (element as any).anchor_side as\n                | \"top\"\n                | \"bottom\"\n                | \"left\"\n                | \"right\"\n                | undefined\n              if (!side) return undefined\n              switch (side) {\n                case \"top\":\n                  return \"top_center\"\n                case \"bottom\":\n                  return \"bottom_center\"\n                case \"left\":\n                  return \"center_left\"\n                case \"right\":\n                  return \"center_right\"\n              }\n            })() ||\n            \"center\"\n\n          switch (anchorAlignment) {\n            case \"top_left\":\n              break\n            case \"top_center\":\n              initialX -= textWidth / 2\n              break\n            case \"top_right\":\n              initialX -= textWidth\n              break\n            case \"center_right\":\n              initialY -= textHeight / 2\n              break\n            case \"center_left\":\n              initialX -= textWidth\n              initialY -= textHeight / 2\n              break\n            case \"bottom_left\":\n              initialY -= textHeight\n              break\n            case \"bottom_center\":\n              initialX -= textWidth / 2\n              initialY -= textHeight\n              break\n            case \"bottom_right\":\n              initialX -= textWidth\n              initialY -= textHeight\n              break\n            default:\n              initialX -= textWidth / 2\n              initialY -= textHeight / 2\n              break\n          }\n\n          let anchoredX = initialX\n          const anchoredY = initialY\n\n          let rotation = element.ccw_rotation || 0\n          const cx = anchoredX + textWidth / 2\n          const cy = anchoredY + textHeight / 2\n          const transforms: Matrix[] = []\n\n          // Apply mirroring and rotation for the bottom layer only\n          if (element.layer === \"bottom\") {\n            transforms.push(\n              translate(cx, cy),\n              { a: -1, b: 0, c: 0, d: 1, e: 0, f: 0 }, // Horizontal flip\n              translate(-cx, -cy),\n            )\n            rotation = -rotation // Reverse rotation for bottom layer\n          }\n\n          // Apply rotation if present\n          if (rotation) {\n            const rad = (rotation * Math.PI) / 180\n            transforms.push(\n              translate(cx, cy), // Translate to center of rotation\n              rotate(rad), // Apply rotation\n              translate(-cx, -cy), // Translate back\n            )\n          }\n\n          // Process each character in the text\n          for (const char of element.text.toUpperCase()) {\n            if (char === \" \") {\n              anchoredX += spaceWidth + letterSpacing\n              continue\n            }\n\n            const letterPaths = lineAlphabet[char] || []\n            for (const path of letterPaths) {\n              const x1 = anchoredX + path.x1 * fontSize\n              const y1 = anchoredY + path.y1 * fontSize\n              const x2 = anchoredX + path.x2 * fontSize\n              const y2 = anchoredY + path.y2 * fontSize\n\n              // Apply transformations after positioning\n              let p1 = { x: x1, y: y1 }\n              let p2 = { x: x2, y: y2 }\n\n              if (transforms.length > 0) {\n                const transformMatrix = compose(...transforms)\n                p1 = applyToPoint(transformMatrix, p1)\n                p2 = applyToPoint(transformMatrix, p2)\n              }\n\n              gerber.add(\"move_operation\", { x: p1.x, y: mfy(p1.y) })\n              gerber.add(\"plot_operation\", { x: p2.x, y: mfy(p2.y) })\n            }\n\n            anchoredX += fontSize + letterSpacing // Move to next character position\n          }\n          glayer.push(...gerber.build())\n        }\n      } else if (element.type === \"pcb_smtpad\" && element.shape !== \"polygon\") {\n        if (element.layer === layer) {\n          for (const glayer of [\n            glayers[getGerberLayerName(layer, \"copper\")],\n            glayers[getGerberLayerName(layer, \"soldermask\")],\n          ]) {\n            const apertureConfig = getApertureConfigFromPcbSmtpad(element)\n            const apertureNumber = findApertureNumber(glayer, apertureConfig)\n            const gb = gerberBuilder().add(\"select_aperture\", {\n              aperture_number: apertureNumber,\n            })\n\n            if (element.shape === \"rotated_rect\" && element.ccw_rotation) {\n              gb.add(\"load_rotation\", {\n                rotation_degrees: element.ccw_rotation,\n              })\n            }\n\n            gb.add(\"flash_operation\", { x: element.x, y: mfy(element.y) })\n\n            if (element.shape === \"rotated_rect\" && element.ccw_rotation) {\n              // Reset rotation\n              gb.add(\"load_rotation\", { rotation_degrees: 0 })\n            }\n\n            glayer.push(...gb.build())\n          }\n        }\n      } else if (element.type === \"pcb_solder_paste\") {\n        if (element.layer === layer) {\n          for (const glayer of [glayers[getGerberLayerName(layer, \"paste\")]]) {\n            glayer.push(\n              ...gerberBuilder()\n                .add(\"select_aperture\", {\n                  aperture_number: findApertureNumber(\n                    glayer,\n                    getApertureConfigFromPcbSolderPaste(element),\n                  ),\n                })\n                .add(\"flash_operation\", { x: element.x, y: mfy(element.y) })\n                .build(),\n            )\n          }\n        }\n      } else if (element.type === \"pcb_plated_hole\") {\n        if (element.layers.includes(layer as any)) {\n          for (const glayer of [\n            glayers[getGerberLayerName(layer, \"copper\")],\n            glayers[getGerberLayerName(layer, \"soldermask\")],\n          ]) {\n            if (element.shape === \"pill\") {\n              // For pill shapes, use a circular aperture and draw the connecting line\n              const circleApertureConfig = {\n                standard_template_code: \"C\" as const,\n                diameter:\n                  element.outer_width > element.outer_height\n                    ? element.outer_height\n                    : element.outer_width,\n              }\n\n              // Find existing aperture number or get next available\n              let aperture_number = 10\n              try {\n                aperture_number = findApertureNumber(\n                  glayer,\n                  circleApertureConfig,\n                )\n              } catch {\n                aperture_number =\n                  Math.max(\n                    ...glayer\n                      .filter((cmd) => \"aperture_number\" in cmd)\n                      .map((cmd) => (cmd as any).aperture_number),\n                    9,\n                  ) + 1\n\n                // Add the aperture definition\n                glayer.push(\n                  ...gerberBuilder()\n                    .add(\"define_aperture_template\", {\n                      aperture_number,\n                      ...circleApertureConfig,\n                    })\n                    .build(),\n                )\n              }\n\n              const gb = gerberBuilder().add(\"select_aperture\", {\n                aperture_number,\n              })\n\n              if (element.outer_width > element.outer_height) {\n                // Horizontal pill\n                const offset = (element.outer_width - element.outer_height) / 2\n                gb.add(\"flash_operation\", {\n                  x: element.x - offset,\n                  y: mfy(element.y),\n                })\n                  .add(\"move_operation\", {\n                    x: element.x - offset,\n                    y: mfy(element.y),\n                  })\n                  .add(\"plot_operation\", {\n                    x: element.x + offset,\n                    y: mfy(element.y),\n                  })\n                  .add(\"flash_operation\", {\n                    x: element.x + offset,\n                    y: mfy(element.y),\n                  })\n              } else {\n                // Vertical pill\n                const offset = (element.outer_height - element.outer_width) / 2\n                gb.add(\"flash_operation\", {\n                  x: element.x,\n                  y: mfy(element.y - offset),\n                })\n                  .add(\"move_operation\", {\n                    x: element.x,\n                    y: mfy(element.y - offset),\n                  })\n                  .add(\"plot_operation\", {\n                    x: element.x,\n                    y: mfy(element.y + offset),\n                  })\n                  .add(\"flash_operation\", {\n                    x: element.x,\n                    y: mfy(element.y + offset),\n                  })\n              }\n\n              glayer.push(...gb.build())\n            } else {\n              const apertureConfig = getApertureConfigFromPcbPlatedHole(element)\n              glayer.push(\n                ...gerberBuilder()\n                  .add(\"select_aperture\", {\n                    aperture_number: findApertureNumber(glayer, apertureConfig),\n                  })\n                  .add(\"flash_operation\", { x: element.x, y: mfy(element.y) })\n                  .build(),\n              )\n            }\n          }\n        }\n      } else if (element.type === \"pcb_hole\") {\n        if (layer !== \"edgecut\") {\n          for (const glayer of [\n            glayers[getGerberLayerName(layer, \"soldermask\")],\n          ]) {\n            if (element.hole_shape !== \"circle\") {\n              console.warn(\n                \"NOT IMPLEMENTED: drawing gerber for non-round holes\",\n              )\n              continue\n            }\n            glayer.push(\n              ...gerberBuilder()\n                .add(\"select_aperture\", {\n                  aperture_number: findApertureNumber(\n                    glayer,\n                    getApertureConfigFromCirclePcbHole(element),\n                  ),\n                })\n                .add(\"flash_operation\", { x: element.x, y: mfy(element.y) })\n                .build(),\n            )\n          }\n        }\n      } else if (element.type === \"pcb_via\") {\n        if (element.layers.includes(layer as any)) {\n          for (const glayer of [glayers[getGerberLayerName(layer, \"copper\")]]) {\n            glayer.push(\n              ...gerberBuilder()\n                .add(\"select_aperture\", {\n                  aperture_number: findApertureNumber(\n                    glayer,\n                    getApertureConfigFromPcbVia(element),\n                  ),\n                })\n                .add(\"flash_operation\", { x: element.x, y: mfy(element.y) })\n                .build(),\n            )\n          }\n        }\n      } else if (element.type === \"pcb_board\" && layer === \"edgecut\") {\n        const glayer = glayers.Edge_Cuts\n        const { width, height, center, outline } = element\n        const gerberBuild = gerberBuilder().add(\"select_aperture\", {\n          aperture_number: 10,\n        })\n        if (outline && outline.length > 2) {\n          gerberBuild.add(\"move_operation\", outline[0])\n          for (let i = 1; i < outline.length; i++) {\n            gerberBuild.add(\"plot_operation\", outline[i])\n          }\n        } else {\n          gerberBuild\n            .add(\"move_operation\", {\n              x: center.x - width / 2,\n              y: mfy(center.y - height / 2),\n            })\n            .add(\"plot_operation\", {\n              x: center.x + width / 2,\n              y: mfy(center.y - height / 2),\n            })\n            // .add(\"move_operation\", {\n            //   x: center.x + width / 2,\n            //   y: center.y - height / 2,\n            // })\n            .add(\"plot_operation\", {\n              x: center.x + width / 2,\n              y: mfy(center.y + height / 2),\n            })\n            // .add(\"move_operation\", {\n            //   x: center.x + width / 2,\n            //   y: center.y + height / 2,\n            // })\n            .add(\"plot_operation\", {\n              x: center.x - width / 2,\n              y: mfy(center.y + height / 2),\n            })\n            // .add(\"move_operation\", {\n            //   x: center.x - width / 2,\n            //   y: center.y + height / 2,\n            // })\n            .add(\"plot_operation\", {\n              x: center.x - width / 2,\n              y: mfy(center.y - height / 2),\n            })\n        }\n\n        glayer.push(...gerberBuild.build())\n      } else if (element.type === \"pcb_cutout\") {\n        if (layer === \"edgecut\") {\n          const ec_layer = glayers.Edge_Cuts\n          const cutout_builder = gerberBuilder().add(\"select_aperture\", {\n            aperture_number: 10,\n          })\n\n          const el = element as PcbCutout\n\n          if (el.shape === \"rect\") {\n            const { center, width, height, rotation } = el\n            const w = width / 2\n            const h = height / 2\n\n            const points = [\n              { x: -w, y: h }, // Top-left\n              { x: w, y: h }, // Top-right\n              { x: w, y: -h }, // Bottom-right\n              { x: -w, y: -h }, // Bottom-left\n            ]\n\n            let transformMatrix = identity()\n            if (rotation) {\n              const angle_rad = (rotation * Math.PI) / 180\n              transformMatrix = rotate(angle_rad)\n            }\n            transformMatrix = compose(\n              translate(center.x, center.y),\n              transformMatrix,\n            )\n\n            const transformedPoints = points.map((p) =>\n              applyToPoint(transformMatrix, p),\n            )\n\n            cutout_builder.add(\"move_operation\", {\n              x: transformedPoints[0].x,\n              y: mfy(transformedPoints[0].y),\n            })\n            for (let i = 1; i < transformedPoints.length; i++) {\n              cutout_builder.add(\"plot_operation\", {\n                x: transformedPoints[i].x,\n                y: mfy(transformedPoints[i].y),\n              })\n            }\n            cutout_builder.add(\"plot_operation\", {\n              x: transformedPoints[0].x,\n              y: mfy(transformedPoints[0].y),\n            })\n          } else if (el.shape === \"circle\") {\n            const { center, radius } = el\n\n            // To draw a circle, we draw two semi-circles\n            const p1 = { x: center.x + radius, y: center.y }\n            const p2 = { x: center.x - radius, y: center.y }\n\n            cutout_builder\n              .add(\"move_operation\", {\n                x: p1.x,\n                y: mfy(p1.y),\n              })\n              .add(\"set_movement_mode_to_counterclockwise_circular\", {})\n              // Draw the first semi-circle (top half if we start from rightmost point)\n              .add(\"plot_operation\", {\n                x: p2.x,\n                y: mfy(p2.y),\n                i: -radius,\n                j: 0,\n              })\n              // Draw the second semi-circle (bottom half)\n              .add(\"plot_operation\", {\n                x: p1.x,\n                y: mfy(p1.y),\n                i: radius,\n                j: 0,\n              })\n              .add(\"set_movement_mode_to_linear\", {})\n          } else if (el.shape === \"polygon\") {\n            const { points } = el\n            if (points.length > 0) {\n              cutout_builder.add(\"move_operation\", {\n                x: points[0].x,\n                y: mfy(points[0].y),\n              })\n              for (let i = 1; i < points.length; i++) {\n                cutout_builder.add(\"plot_operation\", {\n                  x: points[i].x,\n                  y: mfy(points[i].y),\n                })\n              }\n              cutout_builder.add(\"plot_operation\", {\n                x: points[0].x,\n                y: mfy(points[0].y),\n              })\n            }\n          }\n          ec_layer.push(...cutout_builder.build())\n        }\n      } else if (\n        element.type === \"pcb_copper_pour\" &&\n        layer === element.layer\n      ) {\n        const glayer = glayers[getGerberLayerName(layer, \"copper\")]\n\n        const pour_builder = gerberBuilder()\n          .add(\"select_aperture\", { aperture_number: 10 })\n          .add(\"start_region_statement\", {})\n\n        if (element.shape === \"brep\") {\n          const { brep_shape } = element as any\n          if (!brep_shape) continue\n          const { outer_ring, inner_rings } = brep_shape\n\n          const drawRing = (ring: {\n            vertices: Array<{ x: number; y: number; bulge?: number }>\n          }) => {\n            if (!ring || ring.vertices.length === 0) return\n\n            pour_builder.add(\"move_operation\", {\n              x: ring.vertices[0].x,\n              y: mfy(ring.vertices[0].y),\n            })\n\n            const vertices_loop = [...ring.vertices, ring.vertices[0]]\n\n            for (let i = 0; i < vertices_loop.length - 1; i++) {\n              const start = vertices_loop[i]\n              const end = vertices_loop[i + 1]\n\n              if (start.bulge && Math.abs(start.bulge) > 1e-9) {\n                const bulge =\n                  (opts.flip_y_axis ? -1 : 1) * (start.bulge as number)\n                if (bulge > 0) {\n                  // CCW\n                  pour_builder.add(\n                    \"set_movement_mode_to_counterclockwise_circular\",\n                    {},\n                  )\n                } else {\n                  // CW\n                  pour_builder.add(\n                    \"set_movement_mode_to_clockwise_circular\",\n                    {},\n                  )\n                }\n\n                const p1 = { x: start.x, y: start.y }\n                const p2 = { x: end.x, y: end.y }\n\n                const dx = p2.x - p1.x\n                const dy = p2.y - p1.y\n                const d = Math.sqrt(dx * dx + dy * dy)\n\n                if (d < 1e-9) {\n                  pour_builder.add(\"set_movement_mode_to_linear\", {})\n                  pour_builder.add(\"plot_operation\", {\n                    x: end.x,\n                    y: mfy(end.y),\n                  })\n                  continue\n                }\n\n                const abs_b = Math.abs(bulge)\n                const theta = 4 * Math.atan(abs_b)\n                if (Math.abs(Math.sin(theta / 2)) < 1e-9) {\n                  pour_builder.add(\"set_movement_mode_to_linear\", {})\n                  pour_builder.add(\"plot_operation\", {\n                    x: end.x,\n                    y: mfy(end.y),\n                  })\n                  continue\n                }\n                const R = d / (2 * Math.sin(theta / 2))\n                const alpha = (Math.PI - theta) / 2\n                const phi = Math.atan2(dy, dx)\n                const delta_angle = bulge > 0 ? alpha : -alpha\n                const angle_p1_center = phi + delta_angle\n                const Cx = p1.x + R * Math.cos(angle_p1_center)\n                const Cy = p1.y + R * Math.sin(angle_p1_center)\n\n                const i_offset = Cx - p1.x\n                const j_offset = Cy - p1.y\n\n                pour_builder.add(\"plot_operation\", {\n                  x: end.x,\n                  y: mfy(end.y),\n                  i: i_offset,\n                  j: opts.flip_y_axis ? -j_offset : j_offset,\n                })\n              } else {\n                // line\n                pour_builder.add(\"set_movement_mode_to_linear\", {})\n                pour_builder.add(\"plot_operation\", { x: end.x, y: mfy(end.y) })\n              }\n            }\n          }\n\n          // To conform to Gerber spec (CCW outer, CW inner) from tscircuit\n          // spec (CW outer, CCW inner), we must reverse both.\n          const reverseRing = (ring: {\n            vertices: Array<{ x: number; y: number; bulge?: number }>\n          }): {\n            vertices: Array<{ x: number; y: number; bulge?: number }>\n          } => {\n            const { vertices } = ring\n            if (!vertices || vertices.length === 0) return { vertices: [] }\n            const n = vertices.length\n\n            const reversed_pts = [...vertices].reverse()\n\n            const new_vertices = reversed_pts.map((pt, i) => {\n              const bulge_v_idx = (n - 2 - i + n) % n\n              const bulge = vertices[bulge_v_idx].bulge\n              return { ...pt, bulge: bulge ? -bulge : undefined }\n            })\n\n            return { vertices: new_vertices }\n          }\n\n          drawRing(reverseRing(outer_ring))\n          if (inner_rings) {\n            for (const inner_ring of inner_rings) {\n              drawRing(reverseRing(inner_ring))\n            }\n          }\n        } else if (element.shape === \"rect\") {\n          const { center, width, height, rotation } = element\n          const w = (width as number) / 2\n          const h = (height as number) / 2\n\n          const points = [\n            { x: -w, y: h }, // Top-left\n            { x: w, y: h }, // Top-right\n            { x: w, y: -h }, // Bottom-right\n            { x: -w, y: -h }, // Bottom-left\n          ]\n\n          let transformMatrix = identity()\n          if (rotation) {\n            const angle_rad = ((rotation as number) * Math.PI) / 180\n            transformMatrix = rotate(angle_rad)\n          }\n          transformMatrix = compose(\n            translate(center.x, center.y),\n            transformMatrix,\n          )\n\n          const transformedPoints = points.map((p) =>\n            applyToPoint(transformMatrix, p),\n          )\n\n          pour_builder.add(\"move_operation\", {\n            x: transformedPoints[0].x,\n            y: mfy(transformedPoints[0].y),\n          })\n          for (let i = 1; i < transformedPoints.length; i++) {\n            pour_builder.add(\"plot_operation\", {\n              x: transformedPoints[i].x,\n              y: mfy(transformedPoints[i].y),\n            })\n          }\n          pour_builder.add(\"plot_operation\", {\n            x: transformedPoints[0].x,\n            y: mfy(transformedPoints[0].y),\n          })\n        } else if (element.shape === \"polygon\") {\n          const { points } = element as any\n          if (points.length > 0) {\n            pour_builder.add(\"move_operation\", {\n              x: points[0].x,\n              y: mfy(points[0].y),\n            })\n            for (let i = 1; i < points.length; i++) {\n              pour_builder.add(\"plot_operation\", {\n                x: points[i].x,\n                y: mfy(points[i].y),\n              })\n            }\n            pour_builder.add(\"plot_operation\", {\n              x: points[0].x,\n              y: mfy(points[0].y),\n            })\n          }\n        }\n\n        pour_builder.add(\"end_region_statement\", {})\n\n        glayer.push(...pour_builder.build())\n      }\n    }\n  }\n\n  for (const key of Object.keys(glayers)) {\n    glayers[key as keyof LayerToGerberCommandsMap].push(\n      ...gerberBuilder().add(\"end_of_file\", {}).build(),\n    )\n  }\n\n  return glayers\n}\n"],"mappings":";AAAA,SAAS,SAAS;;;ACWX,IAAM,6BAA6B,CAGxC;AAAA,EACA;AAAA,EACA;AAAA,EACA;AACF,MAIqC;AACnC,SAAO;AAAA,IACL;AAAA,IACA;AAAA,IACA;AAAA,EACF;AACF;;;ADzBO,IAAM,OAAO,2BAA2B;AAAA,EAC7C,cAAc;AAAA,EACd,QAAQ,EAAE,OAAO;AAAA,IACf,cAAc,EAAE,QAAQ,MAAM,EAAE,QAAQ,MAAM;AAAA,IAC9C,QAAQ,EAAE,OAAO;AAAA,EACnB,CAAC;AAAA,EACD,WAAW,CAAC,MAAM,QAAQ,EAAE,MAAM;AACpC,CAAC;;;AEVD,SAAS,KAAAA,UAAS;AAMX,IAAM,MAAM,2BAA2B;AAAA,EAC5C,cAAc;AAAA,EACd,QAAQC,GAAE,OAAO;AAAA,IACf,cAAcA,GAAE,QAAQ,KAAK,EAAE,QAAQ,KAAK;AAAA,EAC9C,CAAC;AAAA,EACD,WAAW,MAAM;AACnB,CAAC;;;ACZD,SAAS,KAAAC,UAAS;AAMX,IAAM,MAAM,2BAA2B;AAAA,EAC5C,cAAc;AAAA,EACd,QAAQC,GAAE,OAAO;AAAA,IACf,cAAcA,GAAE,QAAQ,KAAK,EAAE,QAAQ,KAAK;AAAA,EAC9C,CAAC;AAAA,EACD,WAAW,MAAM;AACnB,CAAC;;;ACZD,SAAS,KAAAC,UAAS;AAGX,IAAM,MAAM,2BAA2B;AAAA,EAC5C,cAAc;AAAA,EACd,QAAQC,GAAE,OAAO;AAAA,IACf,cAAcA,GAAE,QAAQ,KAAK,EAAE,QAAQ,KAAK;AAAA,EAC9C,CAAC;AAAA,EACD,WAAW,MAAM;AACnB,CAAC;;;ACTD,SAAS,KAAAC,UAAS;AAGX,IAAM,MAAM,2BAA2B;AAAA,EAC5C,cAAc;AAAA,EACd,QAAQC,GAAE,OAAO;AAAA,IACf,cAAcA,GAAE,QAAQ,KAAK,EAAE,QAAQ,KAAK;AAAA,EAC9C,CAAC;AAAA,EACD,WAAW,MAAM;AACnB,CAAC;;;ACTD,SAAS,KAAAC,UAAS;AAGX,IAAM,MAAM,2BAA2B;AAAA,EAC5C,cAAc;AAAA,EACd,QAAQC,GAAE,OAAO;AAAA,IACf,cAAcA,GAAE,QAAQ,KAAK,EAAE,QAAQ,KAAK;AAAA,EAC9C,CAAC;AAAA,EACD,WAAW,MAAM;AACnB,CAAC;;;ACTD,SAAS,KAAAC,UAAS;AAMX,IAAM,MAAM,2BAA2B;AAAA,EAC5C,cAAc;AAAA,EACd,QAAQC,GAAE,OAAO;AAAA,IACf,cAAcA,GAAE,QAAQ,KAAK,EAAE,QAAQ,KAAK;AAAA,EAC9C,CAAC;AAAA,EACD,WAAW,MAAM;AACnB,CAAC;;;ACZD,SAAS,KAAAC,UAAS;AAMX,IAAM,MAAM,2BAA2B;AAAA,EAC5C,cAAc;AAAA,EACd,QAAQC,GAAE,OAAO;AAAA,IACf,cAAcA,GAAE,QAAQ,KAAK,EAAE,QAAQ,KAAK;AAAA,EAC9C,CAAC;AAAA,EACD,WAAW,MAAM;AACnB,CAAC;;;ACZD,SAAS,KAAAC,UAAS;AAGX,IAAM,MAAM,2BAA2B;AAAA,EAC5C,cAAc;AAAA,EACd,QAAQC,GAAE,OAAO;AAAA,IACf,cAAcA,GAAE,QAAQ,KAAK,EAAE,QAAQ,KAAK;AAAA,EAC9C,CAAC;AAAA,EACD,WAAW,MAAM;AACnB,CAAC;;;ACTD,SAAS,KAAAC,WAAS;AAGX,IAAM,MAAM,2BAA2B;AAAA,EAC5C,cAAc;AAAA,EACd,QAAQC,IAAE,OAAO;AAAA,IACf,cAAcA,IAAE,QAAQ,KAAK,EAAE,QAAQ,KAAK;AAAA,EAC9C,CAAC;AAAA,EACD,WAAW,MAAM;AACnB,CAAC;;;ACTD,SAAS,KAAAC,WAAS;AAGX,IAAM,MAAM,2BAA2B;AAAA,EAC5C,cAAc;AAAA,EACd,QAAQC,IAAE,OAAO;AAAA,IACf,cAAcA,IAAE,QAAQ,KAAK,EAAE,QAAQ,KAAK;AAAA,EAC9C,CAAC;AAAA,EACD,WAAW,MAAM;AACnB,CAAC;;;ACTD,SAAS,KAAAC,WAAS;AAGX,IAAM,cAAc,2BAA2B;AAAA,EACpD,cAAc;AAAA,EACd,QAAQC,IAAE,OAAO;AAAA,IACf,cAAcA,IAAE,QAAQ,aAAa,EAAE,QAAQ,aAAa;AAAA,IAC5D,aAAaA,IAAE,OAAO;AAAA,IACtB,UAAUA,IAAE,OAAO;AAAA,EACrB,CAAC;AAAA,EACD,WAAW,CAAC,MAAM,IAAI,EAAE,WAAW,IAAI,EAAE,SAAS,QAAQ,CAAC,CAAC;AAC9D,CAAC;;;ACXD,SAAS,KAAAC,WAAS;AAGX,IAAM,WAAW,2BAA2B;AAAA,EACjD,cAAc;AAAA,EACd,QAAQC,IAAE,OAAO;AAAA,IACf,cAAcA,IAAE,QAAQ,UAAU,EAAE,QAAQ,UAAU;AAAA,IACtD,GAAGA,IAAE,OAAO;AAAA,IACZ,GAAGA,IAAE,OAAO;AAAA,EACd,CAAC;AAAA,EACD,WAAW,CAAC,MAAM,IAAI,EAAE,EAAE,QAAQ,CAAC,CAAC,IAAI,EAAE,EAAE,QAAQ,CAAC,CAAC;AACxD,CAAC;;;ACXD,SAAS,KAAAC,WAAS;AAGX,IAAM,mBAAmB,2BAA2B;AAAA,EACzD,cAAc;AAAA,EACd,QAAQC,IAAE,OAAO;AAAA,IACf,cAAcA,IAAE,QAAQ,kBAAkB,EAAE,QAAQ,kBAAkB;AAAA,IACtE,gBAAgBA,IAAE,OAAO;AAAA,IACzB,iBAAiBA,IAAE,OAAO;AAAA,EAC5B,CAAC;AAAA,EACD,UAAU,EAAE,gBAAgB,gBAAgB,GAAG;AAC7C,WAAO,SAAS,cAAc,IAAI,eAAe;AAAA,EACnD;AACF,CAAC;;;ACbD,SAAS,KAAAC,WAAS;AAGX,IAAM,iBAAiB,2BAA2B;AAAA,EACvD,cAAc;AAAA,EACd,QAAQC,IAAE,OAAO;AAAA,IACf,cAAcA,IAAE,QAAQ,gBAAgB,EAAE,QAAQ,gBAAgB;AAAA,IAClE,MAAMA,IAAE,OAAO;AAAA,EACjB,CAAC;AAAA,EACD,UAAU,EAAE,KAAK,GAAG;AAClB,WAAO,KAAK,IAAI;AAAA,EAClB;AACF,CAAC;;;ACZD,SAAS,KAAAC,WAAS;AAGX,IAAM,SAAS,2BAA2B;AAAA,EAC/C,cAAc;AAAA,EACd,QAAQC,IAAE,OAAO;AAAA,IACf,cAAcA,IAAE,QAAQ,QAAQ,EAAE,QAAQ,QAAQ;AAAA,EACpD,CAAC;AAAA,EACD,WAAW,MAAM;AACnB,CAAC;;;ACTD,SAAS,KAAAC,WAAS;AAGX,IAAM,cAAc,2BAA2B;AAAA,EACpD,cAAc;AAAA,EACd,QAAQC,IAAE,OAAO;AAAA,IACf,cAAcA,IAAE,QAAQ,aAAa,EAAE,QAAQ,aAAa;AAAA,IAC5D,MAAMA,IAAE,MAAM,CAACA,IAAE,QAAQ,MAAM,GAAGA,IAAE,QAAQ,QAAQ,CAAC,CAAC;AAAA,IACtD,IAAIA,IACD,MAAM,CAACA,IAAE,QAAQ,IAAI,GAAGA,IAAE,QAAQ,IAAI,CAAC,CAAC,EACxC,SAAS,EACT,QAAQ,IAAI;AAAA,EACjB,CAAC;AAAA,EACD,UAAU,GAAG;AACX,WAAO,GAAG,EAAE,IAAI,GAAG,CAAC,EAAE,KAAK,KAAK,IAAI,EAAE,EAAE,EAAE;AAAA,EAC5C;AACF,CAAC;;;AChBD,SAAS,KAAAC,WAAS;AAGX,IAAM,WAAW,2BAA2B;AAAA,EACjD,cAAc;AAAA,EACd,QAAQC,IAAE,OAAO;AAAA,IACf,cAAcA,IAAE,QAAQ,UAAU,EAAE,QAAQ,UAAU;AAAA,IACtD,aAAaA,IAAE,OAAO;AAAA,EACxB,CAAC;AAAA,EACD,WAAW,CAAC,MAAM,IAAI,EAAE,WAAW;AACrC,CAAC;;;ACVD,SAAS,KAAAC,WAAS;AAGX,IAAM,uBAAuB,2BAA2B;AAAA,EAC7D,cAAc;AAAA,EACd,QAAQC,IAAE,OAAO;AAAA,IACf,cAAcA,IACX,QAAQ,sBAAsB,EAC9B,QAAQ,sBAAsB;AAAA,IACjC,WAAWA,IAAE,QAAQ;AAAA,EACvB,CAAC;AAAA,EACD,UAAU,EAAE,UAAU,GAAG;AACvB,QAAI,CAAC,WAAW;AACd,YAAM,IAAI,MAAM,iBAAiB;AAAA,IACnC;AACA,WAAO;AAAA,EACT;AACF,CAAC;;;ACjBD,SAAS,KAAAC,WAAS;AAGX,IAAM,eAAe,2BAA2B;AAAA,EACrD,cAAc;AAAA,EACd,QAAQC,IAAE,OAAO;AAAA,IACf,cAAcA,IAAE,QAAQ,cAAc,EAAE,QAAQ,cAAc;AAAA,EAChE,CAAC;AAAA,EACD,WAAW,MAAM;AACnB,CAAC;;;ACLM,IAAM,6BAA6B;AAAA,EACxC;AAAA,EACA;AAAA,EACA;AAAA,EACA;AAAA,EACA;AAAA,EACA;AAAA,EACA;AAAA,EACA;AAAA,EACA;AAAA,EACA,GAAS;AAAA,EACT;AAAA,EACA;AAAA,EACA;AAAA,EACA;AAAA,EACA;AAAA,EACA;AAAA,EACA;AAAA,EACA;AAAA,EACA;AAAA,EACA;AAAA,EACA;AACF;;;ACrBO,IAAM,yBAAyB,CACpC,aACG;AACH,SAAO,SACJ,IAAI,CAAC,MAAM;AACV,UAAM,MAAM,2BAA2B,EAAE,YAAY;AACrD,WAAO,IAAI,UAAU,CAAQ;AAAA,EAC/B,CAAC,EACA,KAAK,IAAI;AACd;;;ACRA,IAAM,uBAAN,MAA2B;AAAA,EACzB;AAAA,EAEA,cAAc;AACZ,SAAK,WAAW,CAAC;AAAA,EACnB;AAAA,EAEA,IACE,KACA,OACsB;AACtB,SAAK,SAAS,KAAK;AAAA,MACjB,GAAI;AAAA,QACF,cAAc,2BAA2B,GAAG,EAAE;AAAA,MAChD;AAAA,MACA,GAAG;AAAA,IACL,CAAC;AACD,WAAO;AAAA,EACT;AAAA,EAEA,QAAwC;AACtC,WAAO,KAAK;AAAA,EACd;AACF;AAEO,IAAM,gBAAgB,MAAM,IAAI,qBAAqB;;;AC3BrD,IAAM,qCAAqC,CAAC;AAAA,EACjD;AAAA,EACA;AAAA,EACA,cAAc;AAChB,MAIsC;AACpC,QAAM,UAAU,cAAc;AAG9B,UAAQ,IAAI,OAAO,CAAC,CAAC;AAGrB,QAAM,YAAW,oBAAI,KAAK,GAAE,YAAY;AACxC,UACG,IAAI,kBAAkB;AAAA,IACrB,MAAM,+BAA+B,QAAQ;AAAA,EAC/C,CAAC,EACA,IAAI,kBAAkB;AAAA,IACrB,MAAM;AAAA,EACR,CAAC,EACA,IAAI,oBAAoB;AAAA,IACvB,gBAAgB;AAAA,IAChB,iBAAiB;AAAA,EACnB,CAAC,EACA,IAAI,oBAAoB;AAAA,IACvB,gBAAgB;AAAA,IAChB,iBAAiB;AAAA,EACnB,CAAC,EACA,IAAI,oBAAoB;AAAA,IACvB,gBAAgB;AAAA,IAChB,iBAAiB;AAAA,EACnB,CAAC,EACA,IAAI,QAAQ,EAAE,QAAQ,EAAE,CAAC,EACzB,IAAI,eAAe,EAAE,MAAM,UAAU,IAAI,KAAK,CAAC;AAElD,MAAI,eAAe;AAEnB,QAAM,uBAA+C,CAAC;AAGtD,aAAW,WAAW,aAAa;AACjC,QACE,QAAQ,SAAS,qBACjB,QAAQ,SAAS,cACjB,QAAQ,SAAS,WACjB;AACA,UAAI;AAEJ,UAAI,mBAAmB,SAAS;AAC9B,wBAAgB,QAAQ;AAAA,MAC1B,WACE,QAAQ,SAAS,qBACjB,QAAQ,UAAU,QAClB;AAEA,wBAAgB,KAAK,IAAI,QAAQ,YAAY,QAAQ,WAAW;AAAA,MAClE;AAEA,UAAI,CAAC,cAAe;AAEpB,UAAI,CAAC,qBAAqB,aAAa,GAAG;AACxC,gBAAQ,IAAI,wBAAwB;AAAA,UAClC,WAAW;AAAA,QACb,CAAC;AACD,gBAAQ,IAAI,eAAe;AAAA,UACzB,aAAa;AAAA,UACb,UAAU;AAAA,QACZ,CAAC;AACD,6BAAqB,aAAa,IAAI;AACtC;AAAA,MACF;AAAA,IACF;AAAA,EACF;AAEA,UAAQ,IAAI,gBAAgB,CAAC,CAAC;AAC9B,UAAQ,IAAI,OAAO,CAAC,CAAC;AACrB,UAAQ,IAAI,OAAO,CAAC,CAAC;AAGrB,WAAS,IAAI,IAAI,IAAI,cAAc,KAAK;AACtC,YAAQ,IAAI,YAAY,EAAE,aAAa,EAAE,CAAC;AAC1C,eAAW,WAAW,aAAa;AACjC,UACE,QAAQ,SAAS,qBACjB,QAAQ,SAAS,cACjB,QAAQ,SAAS,WACjB;AACA,YACE,CAAC,cACA,QAAQ,SAAS,qBAAqB,QAAQ,SAAS;AAExD;AACF,YAAI;AAEJ,YAAI,mBAAmB,SAAS;AAC9B,0BAAgB,QAAQ;AAAA,QAC1B;AAEA,YAAI,QAAQ,SAAS,qBAAqB,QAAQ,UAAU,QAAQ;AAClE,0BAAgB,KAAK,IAAI,QAAQ,YAAY,QAAQ,WAAW;AAGhE,cAAI,qBAAqB,aAAa,MAAM,GAAG;AAC7C,kBAAM,eAAe,cAAc,KAAK;AAExC,gBAAI,QAAQ,aAAa,QAAQ,aAAa;AAE5C,oBAAM,UAAU,QAAQ,aAAa,QAAQ,eAAe;AAC5D,sBACG,IAAI,OAAO,CAAC,CAAC,EACb,IAAI,YAAY;AAAA,gBACf,GAAG,QAAQ,IAAI;AAAA,gBACf,GAAG,QAAQ,IAAI;AAAA,cACjB,CAAC,EACA,IAAI,OAAO,CAAC,CAAC,EACb,IAAI,OAAO,CAAC,CAAC,EACb,IAAI,YAAY;AAAA,gBACf,GAAG,QAAQ,IAAI;AAAA,gBACf,GAAG,QAAQ,IAAI;AAAA,cACjB,CAAC,EACA,IAAI,OAAO,CAAC,CAAC,EACb,IAAI,OAAO,CAAC,CAAC;AAAA,YAClB,OAAO;AAEL,oBAAM,UAAU,QAAQ,cAAc,QAAQ,cAAc;AAC5D,sBACG,IAAI,OAAO,CAAC,CAAC,EACb,IAAI,YAAY;AAAA,gBACf,GAAG,QAAQ;AAAA,gBACX,IAAI,QAAQ,IAAI,UAAU;AAAA,cAC5B,CAAC,EACA,IAAI,OAAO,CAAC,CAAC,EACb,IAAI,OAAO,CAAC,CAAC,EACb,IAAI,YAAY;AAAA,gBACf,GAAG,QAAQ;AAAA,gBACX,IAAI,QAAQ,IAAI,UAAU;AAAA,cAC5B,CAAC,EACA,IAAI,OAAO,CAAC,CAAC,EACb,IAAI,OAAO,CAAC,CAAC;AAAA,YAClB;AAAA,UACF;AAAA,QACF,WAAW,CAAC,cAAe;AAAA,iBAClB,qBAAqB,aAAa,MAAM,GAAG;AAClD,kBAAQ,IAAI,YAAY;AAAA,YACtB,GAAG,QAAQ;AAAA,YACX,GAAG,QAAQ,KAAK,cAAc,KAAK;AAAA,UACrC,CAAC;AAAA,QACH;AAAA,MACF;AAAA,IACF;AAAA,EACF;AAEA,UAAQ,IAAI,OAAO,CAAC,CAAC;AAErB,SAAO,QAAQ,MAAM;AACvB;;;AClKA,SAAS,KAAAC,WAAS;;;ACWX,IAAM,sBAAsB,CAGjC;AAAA,EACA;AAAA,EACA;AAAA,EACA;AACF,MAI8B;AAC5B,SAAO;AAAA,IACL;AAAA,IACA;AAAA,IACA;AAAA,EACF;AACF;;;ADzBO,IAAM,4BAA4B,oBAAoB;AAAA,EAC3D,cAAc;AAAA,EACd,QAAQC,IACL,OAAO;AAAA,IACN,cAAcA,IAAE,QAAQ,IAAI,EAAE,QAAQ,IAAI;AAAA,IAC1C,gBAAgBA,IAAE,OAAO;AAAA,IACzB,iBAAiBA,IAAE,OAAO;AAAA,EAC5B,CAAC,EACA;AAAA,IACC;AAAA,EACF;AAAA,EACF,WAAW,CAAC,EAAE,gBAAgB,gBAAgB,MAAM;AAClD,WAAO,MAAM,cAAc,IAAI,eAAe;AAAA,EAChD;AACF,CAAC;;;AEjBD,SAAS,KAAAC,WAAS;AAGX,IAAM,wBAAwB,oBAAoB;AAAA,EACvD,cAAc;AAAA,EACd,QAAQC,IACL,OAAO;AAAA,IACN,cAAcA,IAAE,QAAQ,IAAI,EAAE,QAAQ,IAAI;AAAA,IAC1C,gBAAgBA,IAAE,OAAO;AAAA,IACzB,iBAAiBA,IAAE,OAAO;AAAA,EAC5B,CAAC,EACA,SAAS,8CAA8C;AAAA,EAC1D,WAAW,CAAC,EAAE,gBAAgB,gBAAgB,MAAM;AAClD,WAAO,OAAO,cAAc,IAAI,eAAe;AAAA,EACjD;AACF,CAAC;;;ACfD,SAAS,KAAAC,WAAS;AAGX,IAAM,0BAA0B,oBAAoB;AAAA,EACzD,cAAc;AAAA,EACd,QAAQC,IACL,OAAO;AAAA,IACN,cAAcA,IAAE,QAAQ,IAAI,EAAE,QAAQ,IAAI;AAAA,IAC1C,gBAAgBA,IAAE,OAAO;AAAA,IACzB,iBAAiBA,IAAE,OAAO;AAAA,EAC5B,CAAC,EACA;AAAA,IACC;AAAA,EACF;AAAA,EACF,WAAW,CAAC,EAAE,gBAAgB,gBAAgB,MAAM;AAClD,WAAO,MAAM,cAAc,IAAI,eAAe;AAAA,EAChD;AACF,CAAC;;;ACjBD,SAAS,KAAAC,WAAS;AAGX,IAAM,iBAAiB,oBAAoB;AAAA,EAChD,cAAc;AAAA,EACd,QAAQC,IACL,OAAO;AAAA,IACN,cAAcA,IAAE,QAAQ,IAAI,EAAE,QAAQ,IAAI;AAAA,IAC1C,OAAOA,IAAE,OAAO;AAAA,EAClB,CAAC,EACA;AAAA,IACC;AAAA,EACF;AAAA,EACF,YAAY;AACV,WAAO;AAAA,EACT;AACF,CAAC;;;AChBD,SAAS,KAAAC,WAAS;AAGX,IAAM,UAAU,oBAAoB;AAAA,EACzC,cAAc;AAAA,EACd,QAAQC,IACL,OAAO;AAAA,IACN,cAAcA,IAAE,QAAQ,KAAK,EAAE,QAAQ,KAAK;AAAA,IAC5C,SAASA,IAAE,OAAO;AAAA,EACpB,CAAC,EACA;AAAA,IACC;AAAA,EACF;AAAA,EACF,WAAW,CAAC,MAAM;AAChB,WAAO,OAAO,EAAE,OAAO;AAAA,EACzB;AACF,CAAC;;;AChBD,SAAS,KAAAC,WAAS;AAGX,IAAM,aAAa,oBAAoB;AAAA,EAC5C,cAAc;AAAA,EACd,QAAQC,IACL,OAAO;AAAA,IACN,cAAcA,IAAE,QAAQ,KAAK,EAAE,QAAQ,KAAK;AAAA,EAC9C,CAAC,EACA;AAAA,IACC;AAAA,EACF;AAAA,EACF,YAAY;AACV,WAAO;AAAA,EACT;AACF,CAAC;;;ACfD,SAAS,KAAAC,WAAS;AAGX,IAAM,kBAAkB,oBAAoB;AAAA,EACjD,cAAc;AAAA,EACd,QAAQC,IACL,OAAO;AAAA,IACN,cAAcA,IAAE,QAAQ,IAAI,EAAE,QAAQ,IAAI;AAAA,IAC1C,eAAeA,IAAE,OAAO;AAAA,EAC1B,CAAC,EACA;AAAA,IACC;AAAA,EACF;AAAA,EACF,YAAY;AACV,WAAO;AAAA,EACT;AACF,CAAC;;;AChBD,SAAS,KAAAC,WAAS;AAGX,IAAM,iCAAiC,oBAAoB;AAAA,EAChE,cAAc;AAAA,EACd,QAAQC,IACL,OAAO;AAAA,IACN,cAAcA,IAAE,QAAQ,IAAI,EAAE,QAAQ,IAAI;AAAA,IAC1C,YAAYA,IAAE,OAAO;AAAA,IACrB,eAAeA,IAAE,OAAO;AAAA,EAC1B,CAAC,EACA,SAAS,wDAAwD;AAAA,EACpE,UAAU,EAAE,YAAY,cAAc,GAAG;AACvC,WAAO,MAAM,UAAU;AAAA,EAAM,aAAa;AAAA,EAC5C;AACF,CAAC;;;ACfD,SAAS,KAAAC,WAAS;AAGX,IAAM,mBAAmB,oBAAoB;AAAA,EAClD,cAAc;AAAA,EACd,QAAQC,IACL,OAAO;AAAA,IACN,cAAcA,IAAE,QAAQ,IAAI,EAAE,QAAQ,IAAI;AAAA,IAC1C,WAAWA,IAAE,OAAO,EAAE,SAAS;AAAA,EACjC,CAAC,EACA;AAAA,IACC;AAAA,EACF;AAAA,EACF,UAAU,EAAE,UAAU,GAAG;AACvB,QAAI,CAAC,WAAW;AACd,aAAO;AAAA,IACT;AACA,WAAO,MAAM,SAAS;AAAA,EACxB;AACF,CAAC;;;ACnBD,SAAS,KAAAC,WAAS;AAGX,IAAM,cAAc,oBAAoB;AAAA,EAC7C,cAAc;AAAA,EACd,QAAQC,IACL,OAAO;AAAA,IACN,cAAcA,IAAE,QAAQ,KAAK,EAAE,QAAQ,KAAK;AAAA,EAC9C,CAAC,EACA,SAAS,mBAAmB;AAAA,EAC/B,YAAY;AACV,WAAO;AAAA,EACT;AACF,CAAC;;;ACbD,SAAS,KAAAC,WAAS;AAGX,IAAM,uBAAuB,oBAAoB;AAAA,EACtD,cAAc;AAAA,EACd,QAAQC,IACL,OAAO;AAAA,IACN,cAAcA,IAAE,QAAQ,KAAK,EAAE,QAAQ,KAAK;AAAA,EAC9C,CAAC,EACA,SAAS,iDAAiD;AAAA,EAC7D,YAAY;AACV,WAAO;AAAA,EACT;AACF,CAAC;;;ACbD,SAAS,KAAAC,WAAS;;;ACcX,IAAM,iCAAiC,CAC5C,kBACW;AACX,QAAM,gBAAgB,gBAAgB;AACtC,MAAI,iBAAiB,cAAc,QAAQ,CAAC;AAE5C,SAAO,eAAe,SAAS,GAAG;AAChC,QAAI,gBAAgB,GAAG;AACrB,uBAAiB,KAAK,eAAe,MAAM,CAAC,CAAC;AAAA,IAC/C,OAAO;AACL,uBAAiB,IAAI,cAAc;AAAA,IACrC;AAAA,EACF;AACA,SAAO;AACT;;;ADxBO,IAAM,kBAAkB,oBAAoB;AAAA,EACjD,cAAc;AAAA,EACd,QAAQC,IACL,OAAO;AAAA,IACN,cAAcA,IAAE,QAAQ,KAAK,EAAE,QAAQ,KAAK;AAAA,IAC5C,GAAGA,IAAE,OAAO;AAAA,IACZ,GAAGA,IAAE,OAAO;AAAA,EACd,CAAC,EACA;AAAA,IACC;AAAA,EACF;AAAA,EACF,UAAU,EAAE,GAAG,EAAE,GAAG;AAClB,UAAM,CAAC,IAAI,EAAE,IAAI,CAAC,GAAG,CAAC,EAAE;AAAA,MAAI,CAAC,UAC3B,+BAA+B,KAAK;AAAA,IACtC;AACA,WAAO,IAAI,EAAE,IAAI,EAAE;AAAA,EACrB;AACF,CAAC;;;AErBD,SAAS,KAAAC,WAAS;AAEX,IAAM,iBAAiBA,IAC3B,OAAO;AAAA,EACN,cAAcA,IAAE,QAAQ,IAAI;AAAA,EAC5B,WAAWA,IAAE,OAAO;AACtB,CAAC,EACA,SAAS,mEAAmE;;;ACP/E,SAAS,KAAAC,WAAS;AAEX,IAAM,gBAAgBA,IAC1B,OAAO;AAAA,EACN,cAAcA,IAAE,QAAQ,IAAI;AAAA,EAC5B,UAAUA,IAAE,OAAO;AACrB,CAAC,EACA;AAAA,EACC;AACF;;;ACTF,SAAS,KAAAC,WAAS;AAGX,IAAM,gBAAgB,oBAAoB;AAAA,EAC/C,cAAc;AAAA,EACd,QAAQC,IACL,OAAO;AAAA,IACN,cAAcA,IAAE,QAAQ,IAAI,EAAE,QAAQ,IAAI;AAAA,IAC1C,kBAAkBA,IAAE,OAAO;AAAA,EAC7B,CAAC,EACA;AAAA,IACC;AAAA,EACF;AAAA,EACF,WAAW,CAAC,EAAE,iBAAiB,MAAM;AACnC,WAAO,MAAM,gBAAgB;AAAA,EAC/B;AACF,CAAC;;;AChBD,SAAS,KAAAC,WAAS;AAEX,IAAM,eAAeA,IACzB,OAAO;AAAA,EACN,cAAcA,IAAE,QAAQ,IAAI;AAAA,EAC5B,SAASA,IAAE,OAAO;AACpB,CAAC,EACA,SAAS,gEAAgE;;;ACN5E,SAAS,KAAAC,WAAS;AAGX,IAAM,iBAAiB,oBAAoB;AAAA,EAChD,cAAc;AAAA,EACd,QAAQC,IACL,OAAO;AAAA,IACN,cAAcA,IAAE,QAAQ,KAAK,EAAE,QAAQ,KAAK;AAAA,IAC5C,GAAGA,IAAE,OAAO;AAAA,IACZ,GAAGA,IAAE,OAAO;AAAA,EACd,CAAC,EACA;AAAA,IACC;AAAA,EACF;AAAA,EACF,UAAU,EAAE,GAAG,EAAE,GAAG;AAClB,UAAM,CAAC,IAAI,EAAE,IAAI,CAAC,GAAG,CAAC,EAAE;AAAA,MAAI,CAAC,UAC3B,+BAA+B,KAAK;AAAA,IACtC;AACA,WAAO,IAAI,EAAE,IAAI,EAAE;AAAA,EACrB;AACF,CAAC;;;ACrBD,SAAS,KAAAC,WAAS;AAIX,IAAM,iBAAiB,oBAAoB;AAAA,EAChD,cAAc;AAAA,EACd,QAAQC,IACL,OAAO;AAAA,IACN,cAAcA,IAAE,QAAQ,KAAK,EAAE,QAAQ,KAAK;AAAA,IAC5C,GAAGA,IAAE,OAAO;AAAA,IACZ,GAAGA,IAAE,OAAO;AAAA,IACZ,GAAGA,IAAE,OAAO,EAAE,SAAS;AAAA,IACvB,GAAGA,IAAE,OAAO,EAAE,SAAS;AAAA,EACzB,CAAC,EACA;AAAA,IACC;AAAA,EACF;AAAA,EACF,UAAU,EAAE,GAAG,GAAG,GAAG,EAAE,GAAG;AACxB,UAAM,KAAK,+BAA+B,CAAC;AAC3C,UAAM,KAAK,+BAA+B,CAAC;AAC3C,QAAI,MAAM,IAAI,EAAE,IAAI,EAAE;AACtB,QAAI,MAAM,UAAa,MAAM,QAAW;AACtC,YAAM,KAAK,+BAA+B,CAAC;AAC3C,YAAM,KAAK,+BAA+B,CAAC;AAC3C,aAAO,IAAI,EAAE,IAAI,EAAE;AAAA,IACrB;AACA,WAAO,GAAG,GAAG;AAAA,EACf;AACF,CAAC;;;AC5BD,SAAS,KAAAC,WAAS;AAEX,IAAM,wBAAwBA,IAClC,OAAO;AAAA,EACN,cAAcA,IAAE,QAAQ,IAAI;AAAA,EAC5B,QAAQA,IAAE,OAAO;AACnB,CAAC,EACA,SAAS,0DAA0D;;;ACPtE,SAAS,KAAAC,WAAS;AAEX,IAAM,8BAA8BA,IACxC,OAAO;AAAA,EACN,cAAcA,IAAE,QAAQ,KAAK;AAAA,EAC7B,QAAQA,IAAE,OAAO;AACnB,CAAC,EACA,SAAS,0DAAqD;;;ACPjE,SAAS,KAAAC,WAAS;AAGX,IAAM,0CAA0C,oBAAoB;AAAA,EACzE,cAAc;AAAA,EACd,QAAQC,IACL,OAAO;AAAA,IACN,cAAcA,IAAE,QAAQ,KAAK,EAAE,QAAQ,KAAK;AAAA,EAC9C,CAAC,EACA;AAAA,IACC;AAAA,EACF;AAAA,EACF,YAAY;AACV,WAAO;AAAA,EACT;AACF,CAAC;;;ACfD,SAAS,KAAAC,WAAS;AAGX,IAAM,iDACX,oBAAoB;AAAA,EAClB,cAAc;AAAA;AAAA,EACd,QAAQC,IACL,OAAO;AAAA,IACN,cAAcA,IAAE,QAAQ,KAAK,EAAE,QAAQ,KAAK;AAAA,EAC9C,CAAC,EACA;AAAA,IACC;AAAA,EACF;AAAA,EACF,YAAY;AACV,WAAO;AAAA,EACT;AACF,CAAC;;;AChBH,SAAS,KAAAC,WAAS;AAGX,IAAM,8BAA8B,oBAAoB;AAAA,EAC7D,cAAc;AAAA,EACd,QAAQC,IACL,OAAO;AAAA,IACN,cAAcA,IAAE,QAAQ,KAAK,EAAE,QAAQ,KAAK;AAAA,EAC9C,CAAC,EACA;AAAA,IACC;AAAA,EACF;AAAA,EACF,YAAY;AACV,WAAO;AAAA,EACT;AACF,CAAC;;;ACfD,SAAS,KAAAC,WAAS;AAGX,IAAM,WAAW,oBAAoB;AAAA,EAC1C,cAAc;AAAA,EACd,QAAQC,IACL,OAAO;AAAA,IACN,cAAcA,IAAE,QAAQ,IAAI,EAAE,QAAQ,IAAI;AAAA,IAC1C,MAAMA,IAAE,KAAK,CAAC,MAAM,IAAI,CAAC;AAAA,EAC3B,CAAC,EACA,SAAS,0CAA0C;AAAA,EACtD,UAAU,EAAE,KAAK,GAAG;AAClB,WAAO,MAAM,IAAI;AAAA,EACnB;AACF,CAAC;;;ACdD,SAAS,KAAAC,WAAS;AAGX,IAAM,yBAAyB,oBAAoB;AAAA,EACxD,cAAc;AAAA,EACd,QAAQC,IACL,OAAO;AAAA,IACN,cAAcA,IAAE,QAAQ,KAAK,EAAE,QAAQ,KAAK;AAAA,EAC9C,CAAC,EACA;AAAA,IACC;AAAA,EACF;AAAA,EACF,YAAY;AACV,WAAO;AAAA,EACT;AACF,CAAC;;;ACfD,SAAS,KAAAC,WAAS;AAEX,IAAM,kBAAkBA,IAC5B,OAAO;AAAA,EACN,cAAcA,IAAE,QAAQ,IAAI;AAAA,EAC5B,WAAWA,IAAE,OAAO;AACtB,CAAC,EACA,SAAS,8DAA8D;;;ACP1E,SAAS,KAAAC,WAAS;AAGX,IAAM,uBAAuB,oBAAoB;AAAA,EACtD,cAAc;AAAA,EACd,QAAQC,IAAE,OAAO;AAAA,IACf,cAAcA,IAAE,QAAQ,IAAI,EAAE,QAAQ,IAAI;AAAA,IAC1C,oBAAoBA,IACjB,MAAM,CAACA,IAAE,QAAQ,GAAG,EAAE,SAAS,uBAAuB,GAAGA,IAAE,QAAQ,GAAG,CAAC,CAAC,EACxE,SAAS,EACT,QAAQ,IAAI;AAAA,IACf,qBAAqBA,IAClB,MAAM;AAAA,MACLA,IAAE,QAAQ,GAAG,EAAE,SAAS,mBAAmB;AAAA,MAC3CA,IAAE,QAAQ,GAAG,EAAE,SAAS,sBAAsB;AAAA,IAChD,CAAC,EACA,QAAQ,GAAG;AAAA,IACd,kBAAkBA,IAAE,OAAO,EAAE,IAAI,EAAE,QAAQ,CAAC;AAAA,IAC5C,kBAAkBA,IAAE,OAAO,EAAE,IAAI,EAAE,QAAQ,CAAC;AAAA,IAC5C,kBAAkBA,IAAE,OAAO,EAAE,IAAI,EAAE,QAAQ,CAAC;AAAA,IAC5C,kBAAkBA,IAAE,OAAO,EAAE,IAAI,EAAE,QAAQ,CAAC;AAAA,EAC9C,CAAC;AAAA,EACD,WAAW,MAAM;AACf,WAAO;AAAA,EACT;AACF,CAAC;;;ACzBD,SAAS,KAAAC,WAAS;AAGX,IAAM,qBAAqB,oBAAoB;AAAA,EACpD,cAAc;AAAA,EACd,QAAQC,IACL,OAAO;AAAA,IACN,cAAcA,IAAE,QAAQ,IAAI,EAAE,QAAQ,IAAI;AAAA,IAC1C,UAAUA,IAAE,KAAK,CAAC,KAAK,GAAG,CAAC;AAAA,EAC7B,CAAC,EACA;AAAA,IACC;AAAA,EACF;AAAA,EACF,UAAU,EAAE,SAAS,GAAG;AACtB,WAAO,MAAM,QAAQ;AAAA,EACvB;AACF,CAAC;;;AChBD,SAAS,KAAAC,WAAS;AAIlB,IAAM,kBAAkBC,IAAE,OAAO;AAAA,EAC/B,wBAAwBA,IAAE,QAAQ,GAAG,EAAE,SAAS,QAAQ;AAAA,EACxD,UAAUA,IAAE,OAAO;AAAA,EACnB,eAAeA,IAAE,OAAO,EAAE,SAAS;AACrC,CAAC;AAED,IAAM,qBAAqBA,IAAE,OAAO;AAAA,EAClC,wBAAwBA,IAAE,QAAQ,GAAG,EAAE,SAAS,WAAW;AAAA,EAC3D,QAAQA,IAAE,OAAO;AAAA,EACjB,QAAQA,IAAE,OAAO;AAAA,EACjB,eAAeA,IAAE,OAAO,EAAE,SAAS;AACrC,CAAC;AAED,IAAM,mBAAmBA,IAAE,OAAO;AAAA,EAChC,wBAAwBA,IAAE,QAAQ,GAAG,EAAE,SAAS,SAAS;AAAA,EACzD,QAAQA,IAAE,OAAO;AAAA,EACjB,QAAQA,IAAE,OAAO;AAAA,EACjB,eAAeA,IAAE,OAAO,EAAE,SAAS;AACrC,CAAC;AAED,IAAM,mBAAmBA,IAAE,OAAO;AAAA,EAChC,wBAAwBA,IAAE,QAAQ,GAAG,EAAE,SAAS,SAAS;AAAA,EACzD,gBAAgBA,IAAE,OAAO;AAAA,EACzB,oBAAoBA,IAAE,OAAO,EAAE,IAAI;AAAA,EACnC,UAAUA,IAAE,OAAO,EAAE,SAAS;AAAA,EAC9B,eAAeA,IAAE,OAAO,EAAE,SAAS;AACrC,CAAC;AAED,IAAM,oCAAoCA,IAAE;AAAA,EAC1C;AAAA,EACA,CAAC,iBAAiB,oBAAoB,kBAAkB,gBAAgB;AAC1E;AAEA,IAAM,qBAAqBA,IAAE,OAAO;AAAA,EAClC,YAAYA,IAAE,QAAQ,UAAU;AAAA,EAChC,QAAQA,IAAE,OAAO;AAAA,EACjB,QAAQA,IAAE,OAAO;AAAA,EACjB,iBAAiBA,IAAE,OAAO;AAAA,EAC1B,sBAAsBA,IAAE,OAAO;AACjC,CAAC;AAED,IAAM,qBAAqBA,IAAE,OAAO;AAAA,EAClC,YAAYA,IAAE,QAAQ,UAAU;AAAA,EAChC,QAAQA,IAAE,OAAO;AAAA,EACjB,QAAQA,IAAE,OAAO;AAAA,EACjB,iBAAiBA,IAAE,OAAO;AAAA,EAC1B,sBAAsBA,IAAE,OAAO;AACjC,CAAC;AAED,IAAM,qBAAqBA,IAAE,OAAO;AAAA,EAClC,YAAYA,IAAE,QAAQ,WAAW;AAAA,EACjC,eAAeA,IAAE,OAAO;AAAA,EACxB,YAAYA,IAAE,OAAO;AAAA,EACrB,YAAYA,IAAE,OAAO;AAAA,EACrB,YAAYA,IAAE,OAAO;AAAA,EACrB,YAAYA,IAAE,OAAO;AAAA,EACrB,YAAYA,IAAE,OAAO;AAAA,EACrB,YAAYA,IAAE,OAAO;AAAA,EACrB,YAAYA,IAAE,OAAO;AAAA,EACrB,YAAYA,IAAE,OAAO;AACvB,CAAC;AAED,IAAM,iCAAiCA,IAAE,mBAAmB,cAAc;AAAA,EACxE;AAAA,EACA;AAAA,EACA;AACF,CAAC;AAED,IAAM,2BAA2BA,IAAE,MAAM;AAAA,EACvC;AAAA,EACA;AACF,CAAC;AAEM,IAAM,2BAA2B,oBAAoB;AAAA,EAC1D,cAAc;AAAA,EACd,QAAQ,yBAAyB;AAAA,IAC/BA,IAAE,OAAO;AAAA,MACP,cAAcA,IAAE,QAAQ,KAAK,EAAE,QAAQ,KAAK;AAAA,MAC5C,iBAAiBA,IAAE,OAAO,EAAE,IAAI;AAAA,IAClC,CAAC;AAAA,EACH;AAAA,EACA,UAAU,OAAO;AACf,QAAI,gBAAgB,OAAO;AACzB,YAAM,EAAE,iBAAiB,WAAW,IAAI;AACxC,UAAI,gBAAgB,OAAO,eAAe,GAAG,UAAU;AAEvD,UAAI,eAAe,cAAc,eAAe,YAAY;AAC1D,yBAAiB,GAAG,MAAM,OAAO,QAAQ,CAAC,CAAC,IAAI,MAAM,OAAO,QAAQ,CAAC,CAAC,IAAI,MAAM,gBAAgB,QAAQ,CAAC,CAAC,IAAI,MAAM,qBAAqB,QAAQ,CAAC,CAAC;AAAA,MACrJ,WAAW,eAAe,aAAa;AAErC,cAAM,IAAI,MAAM,qCAAqC;AAAA,MACvD;AAEA,uBAAiB;AACjB,aAAO;AAAA,IACT;AACA,QAAI,4BAA4B,OAAO;AACrC,YAAM,EAAE,iBAAiB,uBAAuB,IAAI;AACpD,UAAI,gBAAgB,OAAO,eAAe,GAAG,sBAAsB;AAEnE,UAAI,2BAA2B,KAAK;AAClC,yBAAiB,GAAG,MAAM,SAAS,QAAQ,CAAC,CAAC;AAAA,MAC/C,WACE,2BAA2B,OAC3B,2BAA2B,KAC3B;AACA,yBAAiB,GAAG,MAAM,OAAO,QAAQ,CAAC,CAAC,IAAI,MAAM,OAAO,QAAQ,CAAC,CAAC;AAAA,MACxE,WAAW,2BAA2B,KAAK;AACzC,yBAAiB,GAAG,MAAM,cAAc,IAAI,MAAM,kBAAkB,IAClE,MAAM,WAAW,IAAI,MAAM,QAAQ,KAAK,EAC1C;AAAA,MACF;AAEA,UAAI,MAAM,eAAe;AACvB,yBAAiB,IAAI,MAAM,cAAc,QAAQ,CAAC,CAAC;AAAA,MACrD;AAEA,uBAAiB;AAEjB,aAAO;AAAA,IACT;AACA,UAAM,IAAI;AAAA,MACR,qCAAqC,KAAK,UAAU,KAAK,CAAC;AAAA,IAC5D;AAAA,EACF;AACF,CAAC;;;ACjID,SAAS,KAAAC,WAAS;AAGX,IAAM,kBAAkB,oBAAoB;AAAA,EACjD,cAAc;AAAA,EACd,QAAQC,IAAE,OAAO;AAAA,IACf,cAAcA,IAAE,QAAQ,GAAG,EAAE,QAAQ,GAAG;AAAA,IACxC,iBAAiBA,IAAE,OAAO,EAAE,IAAI;AAAA,EAClC,CAAC;AAAA,EACD,UAAU,EAAE,gBAAgB,GAAG;AAC7B,WAAO,IAAI,eAAe;AAAA,EAC5B;AACF,CAAC;;;ACsBM,IAAM,qBAAqB;AAAA,EAChC;AAAA,EACA;AAAA,EACA;AAAA,EACA;AAAA,EACA;AAAA,EACA;AAAA,EACA;AAAA,EACA;AAAA,EACA;AAAA,EACA;AAAA,EACA;AAAA,EACA;AAAA,EACA;AAAA,EACA;AAAA;AAAA;AAAA,EAGA;AAAA;AAAA,EAEA;AAAA;AAAA;AAAA,EAGA;AAAA,EACA;AAAA,EACA;AAAA,EACA;AAAA,EACA;AAAA,EACA;AAAA,EACA;AAAA,EACA;AAAA;AAEF;;;AC7DO,IAAM,gBAAgB,MAAM,IAAI,cAAc;AAErD,IAAM,gBAAN,MAAoB;AAAA,EAClB;AAAA,EAEA,cAAc;AACZ,SAAK,WAAW,CAAC;AAAA,EACnB;AAAA,EAEA,IACE,WACA,IACe;AACf,QAAI,WAAW;AACb,aAAO,GAAG,IAAI;AAAA,IAChB;AACA,WAAO;AAAA,EACT;AAAA,EAEA,IACE,KACA,OACe;AACf,SAAK,SAAS,KAAK;AAAA,MACjB,GAAI,EAAE,cAAc,mBAAmB,GAAG,EAAE,aAAa;AAAA,MACzD,GAAG;AAAA,IACL,CAAC;AACD,WAAO;AAAA,EACT;AAAA,EAEA,QAAiC;AAC/B,WAAO,KAAK;AAAA,EACd;AACF;;;AClCO,IAAM,yBAAyB,CAAC,YAAsC;AAC3E,QAAM,cAAc,OAAO,OAAO,kBAAkB,EAAE;AAAA,IACpD,CAAC,QAAQ,IAAI,iBAAiB,QAAQ;AAAA,EACxC;AAEA,MAAI,CAAC,aAAa;AAChB,UAAM,IAAI;AAAA,MACR,6BAA6B,QAAQ,YAAY;AAAA,IACnD;AAAA,EACF;AAEA,MAAI,CAAC,YAAY,WAAW;AAC1B,UAAM,IAAI;AAAA,MACR,6BAA6B,QAAQ,YAAY;AAAA,IACnD;AAAA,EACF;AAEA,SAAO,YAAY,UAAU,OAAc;AAC7C;;;ACjBO,IAAM,+BAA+B,CAC1C,kBACoC;AACpC,QAAM,2BAA4D,CAAC;AACnE,aAAW,aAAa,OAAO,KAAK,aAAa,GAAwB;AACvE,6BAAyB,SAAS,IAAI,cAAc,SAAS,EAC1D,IAAI,CAAC,YAAY;AAChB,aAAO,uBAAuB,OAAO;AAAA,IACvC,CAAC,EACA,KAAK,IAAI;AAAA,EACd;AACA,SAAO;AACT;;;ACbO,IAAM,0BAA0B,CACrC,aACW;AACX,SAAO,SACJ,IAAI,CAAC,YAAY;AAChB,WAAO,uBAAuB,OAAO;AAAA,EACvC,CAAC,EACA,KAAK,IAAI;AACd;;;ACRO,SAAS,MAAS,KAA8B;AACrD,QAAM,SAAwB,CAAC;AAC/B,WAAS,IAAI,GAAG,IAAI,IAAI,SAAS,GAAG,KAAK;AACvC,WAAO,KAAK,CAAC,IAAI,CAAC,GAAG,IAAI,IAAI,CAAC,CAAC,CAAC;AAAA,EAClC;AACA,SAAO;AACT;;;ACNO,IAAM,qBAAqB,CAAC,WAAoC;AACrE,SAAO;AAAA,IACL,GAAG,cAAc,EACd,IAAI,WAAW,EAAE,SAAS,wBAAwB,CAAC,EACnD,IAAI,kCAAkC;AAAA,MACrC,YAAY;AAAA,MACZ,eAAe;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA,EAYrB,KAAK;AAAA,IACD,CAAC,EACA,IAAI,kCAAkC;AAAA,MACrC,YAAY;AAAA,MACZ,eAAe;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA,EAWrB,KAAK;AAAA,IACD,CAAC,EACA,IAAI,kCAAkC;AAAA,MACrC,YAAY;AAAA,MACZ,eAAe;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA,EAgBrB,KAAK;AAAA,IACD,CAAC,EACA,IAAI,WAAW,EAAE,SAAS,sBAAsB,CAAC,EACjD,MAAM;AAAA,EACX;AACF;;;AClDA,OAAO,qBAAqB;;;ACTrB,SAAS,kBACd,MAC4B;AAC5B,QAAM,aAAa,KAAK;AAAA,IACtB,CAAC,QAAyB,IAAI,SAAS;AAAA,EACzC;AAEA,QAAM,SAAwC,CAAC;AAE/C,aAAW,SAAS,YAAY;AAC9B,eAAW,WAAW,MAAM,OAAO;AACjC,UAAI,QAAQ,eAAe,QAAQ;AACjC,eAAO,QAAQ,KAAK,IAAI,OAAO,QAAQ,KAAK,KAAK,oBAAI,IAAY;AACjE,eAAO,QAAQ,KAAK,EAAE,IAAI,QAAQ,KAAK;AAAA,MACzC;AAAA,IACF;AAAA,EACF;AAEA,SAAO;AAAA,IACL,KAAK,MAAM,KAAK,OAAO,OAAO,CAAC,CAAC;AAAA,IAChC,QAAQ,MAAM,KAAK,OAAO,UAAU,CAAC,CAAC;AAAA,EACxC;AACF;;;ADLO,SAAS,wBAAwB;AAAA,EACtC;AAAA,EACA;AAAA,EACA;AACF,GAIG;AACD,QAAM,wBAAwB,MAAM;AAClC,UAAM,0BAA0B,OAAO,OAAO,CAAC,KAAK,YAAY;AAC9D,UAAI,QAAQ,iBAAiB,OAAO;AAClC,eAAO,KAAK,IAAI,KAAK,QAAQ,eAAe;AAAA,MAC9C;AACA,aAAO;AAAA,IACT,GAAG,CAAC;AACJ,QAAI,4BAA4B,GAAG;AACjC,aAAO;AAAA,IACT;AACA,WAAO,0BAA0B;AAAA,EACnC;AAEA,SAAO;AAAA,IACL,GAAG,cAAc,EACd,IAAI,WAAW,EAAE,SAAS,sBAAsB,CAAC,EACjD,MAAM;AAAA,EACX;AAGA,QAAM,cAA0C,kBAAkB,IAAI;AACtE,aAAW,SAAS,YAClB,YAAY,WAAW,IAAI,IAAI,QAAQ,QACzC,GAAG;AACD,WAAO;AAAA,MACL,GAAG,cAAc,EACd,IAAI,4BAA4B;AAAA,QAC/B,iBAAiB,sBAAsB;AAAA,QACvC,wBAAwB;AAAA,QACxB,UAAU;AAAA,MACZ,CAAC,EACA,MAAM;AAAA,IACX;AAAA,EACF;AAGA,QAAM,kBAAkB;AAAA,IACtB;AAAA,IACA,YAAY,WAAW,IAAI,IAAI,QAAQ;AAAA,EACzC;AAEA,aAAW,kBAAkB,iBAAiB;AAC5C,WAAO;AAAA,MACL,GAAG,cAAc,EACd,IAAI,4BAA4B;AAAA,QAC/B,iBAAiB,sBAAsB;AAAA,QACvC,GAAG;AAAA,MACL,CAAC,EACA,MAAM;AAAA,IACX;AAAA,EACF;AAEA,SAAO;AAAA,IACL,GAAG,cAAc,EACd,IAAI,oBAAoB,CAAC,CAAC,EAC1B,IAAI,WAAW,EAAE,SAAS,oBAAoB,CAAC,EAC/C,MAAM;AAAA,EACX;AACF;AAEO,IAAM,iCAAiC,CAC5C,QAC2B;AAC3B,MAAI,IAAI,UAAU,QAAQ;AACxB,WAAO;AAAA,MACL,wBAAwB;AAAA,MACxB,QAAQ,IAAI;AAAA,MACZ,QAAQ,IAAI;AAAA,IACd;AAAA,EACF;AACA,MAAI,IAAI,UAAU,UAAU;AAC1B,WAAO;AAAA,MACL,wBAAwB;AAAA,MACxB,UAAU,IAAI,SAAS;AAAA,IACzB;AAAA,EACF;AACA,MAAI,IAAI,UAAU,gBAAgB;AAEhC,WAAO;AAAA,MACL,wBAAwB;AAAA,MACxB,QAAQ,IAAI;AAAA,MACZ,QAAQ,IAAI;AAAA,IACd;AAAA,EACF;AACA,QAAM,IAAI,MAAM,qBAAsB,IAAY,KAAK,EAAE;AAC3D;AAEO,IAAM,yCAAyC,CACpD,QAC2B;AAC3B,MAAI,kBAAkB,KAAK;AACzB,WAAO;AAAA,MACL,wBAAwB;AAAA,MACxB,UAAU,IAAI;AAAA,IAChB;AAAA,EACF;AACA,QAAM,IAAI,MAAM,6BAA6B,GAAU,EAAE;AAC3D;AAEO,IAAM,yCAAyC,CACpD,QAC2B;AAC3B,MAAI,eAAe,KAAK;AACtB,WAAO;AAAA,MACL,wBAAwB;AAAA,MACxB,UAAU,IAAI,YAAY;AAAA;AAAA,IAC5B;AAAA,EACF;AACA,QAAM,IAAI,MAAM,0BAA0B,GAAU,EAAE;AACxD;AAEO,IAAM,sCAAsC,CACjD,QAC2B;AAC3B,MAAI,IAAI,UAAU,QAAQ;AACxB,WAAO;AAAA,MACL,wBAAwB;AAAA,MACxB,QAAQ,IAAI;AAAA,MACZ,QAAQ,IAAI;AAAA,IACd;AAAA,EACF;AACA,MAAI,IAAI,UAAU,gBAAgB;AAEhC,WAAO;AAAA,MACL,wBAAwB;AAAA,MACxB,QAAQ,IAAI;AAAA,MACZ,QAAQ,IAAI;AAAA,IACd;AAAA,EACF;AACA,MAAI,IAAI,UAAU,UAAU;AAC1B,WAAO;AAAA,MACL,wBAAwB;AAAA,MACxB,UAAU,IAAI,SAAS;AAAA,IACzB;AAAA,EACF;AACA,MAAI,IAAI,UAAU,QAAQ;AACxB,QAAI,EAAE,WAAW,OAAO,YAAY,MAAM;AACxC,YAAM,IAAI;AAAA,QACR;AAAA,MACF;AAAA,IACF;AACA,QAAI,IAAI,SAAS,IAAI,QAAQ;AAC3B,aAAO;AAAA,QACL,YAAY;AAAA,QACZ,QAAQ,IAAI;AAAA,QACZ,QAAQ,IAAI;AAAA,QACZ,iBAAiB,KAAK,IAAI,IAAI,OAAO,IAAI,MAAM;AAAA,QAC/C,sBAAsB,IAAI,QAAQ;AAAA,MACpC;AAAA,IACF;AACA,WAAO;AAAA,MACL,YAAY;AAAA,MACZ,QAAQ,IAAI;AAAA,MACZ,QAAQ,IAAI;AAAA,MACZ,iBAAiB,KAAK,IAAI,IAAI,OAAO,IAAI,MAAM;AAAA,MAC/C,sBAAsB,IAAI,SAAS;AAAA,IACrC;AAAA,EACF;AACA,QAAM,IAAI,MAAM,qBAAsB,IAAY,KAAK,EAAE;AAC3D;AAEO,IAAM,qCAAqC,CAChD,QAC2B;AAC3B,MAAI,IAAI,UAAU,UAAU;AAC1B,QAAI,EAAE,oBAAoB,OAAO,mBAAmB,MAAM;AACxD,YAAM,IAAI;AAAA,QACR;AAAA,MACF;AAAA,IACF;AACA,WAAO;AAAA,MACL,wBAAwB;AAAA,MACxB,UAAU,IAAI;AAAA,IAChB;AAAA,EACF;AACA,MAAI,IAAI,UAAU,QAAQ;AACxB,QAAI,EAAE,iBAAiB,OAAO,kBAAkB,MAAM;AACpD,YAAM,IAAI;AAAA,QACR;AAAA,MACF;AAAA,IACF;AAEA,QAAI,IAAI,cAAc,IAAI,cAAc;AACtC,aAAO;AAAA,QACL,YAAY;AAAA,QACZ,QAAQ,IAAI;AAAA,QACZ,QAAQ,IAAI;AAAA,QACZ,iBAAiB,KAAK,IAAI,IAAI,aAAa,IAAI,YAAY;AAAA,QAC3D,sBAAsB,IAAI,cAAc;AAAA,MAC1C;AAAA,IACF;AACA,WAAO;AAAA,MACL,YAAY;AAAA,MACZ,QAAQ,IAAI;AAAA,MACZ,QAAQ,IAAI;AAAA,MACZ,iBAAiB,KAAK,IAAI,IAAI,aAAa,IAAI,YAAY;AAAA,MAC3D,sBAAsB,IAAI,eAAe;AAAA,IAC3C;AAAA,EACF;AACA,MAAI,IAAI,UAAU,+BAA+B;AAC/C,QAAI,EAAE,oBAAoB,OAAO,qBAAqB,MAAM;AAC1D,YAAM,IAAI;AAAA,QACR;AAAA,MACF;AAAA,IACF;AACA,WAAO;AAAA,MACL,wBAAwB;AAAA,MACxB,QAAQ,IAAI;AAAA,MACZ,QAAQ,IAAI;AAAA,IACd;AAAA,EACF;AACA,QAAM,IAAI;AAAA,IACR,4DAA4D,IAAI,KAAK;AAAA,EACvE;AACF;AAEO,IAAM,qCAAqC,CAChD,QAC2B;AAC3B,MAAI,EAAE,mBAAmB,MAAM;AAC7B,UAAM,IAAI;AAAA,MACR,+DAA+D,IAAI,UAAU;AAAA,IAC/E;AAAA,EACF;AACA,SAAO;AAAA,IACL,wBAAwB;AAAA,IACxB,UAAU,IAAI;AAAA,EAChB;AACF;AAEO,IAAM,8BAA8B,CACzC,QAC2B;AAC3B,MAAI,EAAE,oBAAoB,MAAM;AAC9B,UAAM,IAAI;AAAA,MACR;AAAA,IACF;AAAA,EACF;AACA,SAAO;AAAA,IACL,wBAAwB;AAAA,IACxB,UAAU,IAAI;AAAA,EAChB;AACF;AAEA,SAAS,sCACP,MACA,OAC0B;AAC1B,QAAM,UAAoC,CAAC;AAC3C,QAAM,gBAAgB,oBAAI,IAAY;AAEtC,QAAM,iBAAiB,CAAC,WAAmC;AACzD,UAAM,OAAO,gBAAgB,MAAM;AACnC,QAAI,CAAC,cAAc,IAAI,IAAI,GAAG;AAC5B,cAAQ,KAAK,MAAM;AACnB,oBAAc,IAAI,IAAI;AAAA,IACxB;AAAA,EACF;AAEA,aAAW,OAAO,MAAM;AACtB,QAAI,IAAI,SAAS,cAAc;AAC7B,UAAI,IAAI,UAAU,OAAO;AACvB,uBAAe,+BAA+B,GAAG,CAAC;AAAA,MACpD;AAAA,IACF,WAAW,IAAI,SAAS,oBAAoB;AAC1C,UAAI,IAAI,UAAU,OAAO;AACvB,uBAAe,oCAAoC,GAAG,CAAC;AAAA,MACzD;AAAA,IACF,WAAW,IAAI,SAAS,mBAAmB;AACzC,UAAI,IAAI,OAAO,SAAS,KAAK,GAAG;AAC9B,uBAAe,mCAAmC,GAAG,CAAC;AAAA,MACxD;AAAA,IACF,WAAW,IAAI,SAAS,YAAY;AAClC,UAAI,IAAI,eAAe;AACrB,uBAAe,mCAAmC,GAAG,CAAC;AAAA,UACnD,SAAQ,KAAK,sDAAsD;AAAA,IAC1E,WAAW,IAAI,SAAS,WAAW;AACjC,qBAAe,4BAA4B,GAAG,CAAC;AAAA,IACjD,WAAW,IAAI,SAAS;AACtB,qBAAe,uCAAuC,GAAG,CAAC;AAAA,aACnD,IAAI,SAAS;AACpB,qBAAe,uCAAuC,GAAG,CAAC;AAAA,EAC9D;AAEA,SAAO;AACT;;;AEnTO,IAAM,qBAAqB,CAChC,QACA,kBAKW;AACX,MAAI;AACJ,MAAI,iBAAiB,eAAe;AAClC,UAAM,cAAc,cAAc;AAClC,eAAW,OAAO;AAAA,MAChB,CAAC,YACC,4BAA4B,WAC5B,QAAQ,iBAAiB,SACzB,QAAQ,2BAA2B,OACnC,QAAQ,aAAa;AAAA,IACzB;AAAA,EACF,WACE,4BAA4B,iBAC5B,gBAAgB,eAChB;AACA,eAAW,OAAO;AAAA,MAChB,CAAC,YACC,QAAQ,iBAAiB,SACzB,OAAO,KAAK,aAAa,EAAE;AAAA,QACzB,CAAC,eACC,QAAQ,UAAwC,MAChD,cAAc,UAAwC;AAAA,MAC1D;AAAA,IACJ;AAAA,EACF;AAEA,MAAI,CAAC,UAAU;AAEb,UAAM,IAAI;AAAA,MACR,wCAAwC,KAAK,UAAU,aAAa,CAAC;AAAA,IACvE;AAAA,EACF;AACA,SAAO,SAAS;AAClB;;;AC9CA;AAAA,EACE,MAAQ;AAAA,EACR,SAAW;AAAA,EACX,MAAQ;AAAA,EACR,MAAQ;AAAA,EACR,SAAW;AAAA,IACT,OAAS;AAAA,IACT,QAAU;AAAA,IACV,gBAAgB;AAAA,EAClB;AAAA,EACA,OAAS;AAAA,IACP;AAAA,EACF;AAAA,EACA,KAAO;AAAA,IACL,qBAAqB;AAAA,EACvB;AAAA,EACA,iBAAmB;AAAA,IACjB,kBAAkB;AAAA,IAClB,mBAAmB;AAAA,IACnB,cAAc;AAAA,IACd,eAAe;AAAA,IACf,UAAY;AAAA,IACZ,OAAS;AAAA,IACT,gBAAgB;AAAA,IAChB,iBAAiB;AAAA,IACjB,WAAa;AAAA,IACb,iBAAiB;AAAA,IACjB,eAAe;AAAA,IACf,MAAQ;AAAA,IACR,WAAa;AAAA,EACf;AAAA,EACA,kBAAoB;AAAA,IAClB,YAAc;AAAA,IACd,WAAa;AAAA,EACf;AAAA,EACA,cAAgB;AAAA,IACd,uBAAuB;AAAA,IACvB,8BAA8B;AAAA,IAC9B,yBAAyB;AAAA,EAC3B;AACF;;;ACpCA,IAAM,6BAA6B;AAAA,EACjC,cAAc;AAAA,EACd,iBAAiB;AAAA,EACjB,kBAAkB;AAAA,EAClB,qBAAqB;AAAA,EACrB,kBAAkB;AAAA,EAClB,qBAAqB;AAAA,EACrB,aAAa;AAAA,EACb,gBAAgB;AAAA,EAChB,SAAS;AAAA;AAEX;AAiBO,IAAM,oBAAoB,CAAC,SAUR;AACxB,QAAM,gBACJ,2BACG,KAAK,aACF,GAAG,KAAK,KAAK,IAAI,KAAK,UAAU,KAChC,KAAK,KACX;AACF,SACE,cAAc,EACX,IAAI,yBAAyB;AAAA,IAC5B,gBAAgB;AAAA,IAChB,iBAAiB,oCAAoC,gBAAY,OAAO;AAAA,EAC1E,CAAC,EACA,IAAI,yBAAyB;AAAA,IAC5B,gBAAgB;AAAA,IAChB,kBAAiB,oBAAI,KAAK,GAAE,YAAY;AAAA,EAC1C,CAAC,EAKA,IAAI,yBAAyB;AAAA,IAC5B,gBAAgB;AAAA,IAChB,iBAAiB;AAAA,EACnB,CAAC,EACA,IAAI,yBAAyB;AAAA,IAC5B,gBAAgB;AAAA,IAChB,iBAAiB;AAAA,EACnB,CAAC,EACA;AAAA,IAAI,KAAK,UAAU;AAAA,IAAW,CAAC,OAC9B,GAAG,IAAI,yBAAyB;AAAA,MAC9B,gBAAgB;AAAA,MAChB,iBACE,KAAK,eAAe,eAAe,aAAa;AAAA,IACpD,CAAC;AAAA,EACH,EACC,IAAI,wBAAwB,CAAC,CAAC,EAC9B,IAAI,YAAY;AAAA,IACf,MAAM;AAAA,EACR,CAAC,EACA,IAAI,WAAW;AAAA,IACd,SAAS;AAAA,EACX,CAAC,EACA,IAAI,WAAW;AAAA,IACd,SAAS,wCAAuC,oBAAI,KAAK,GAAE,YAAY,CAAC;AAAA,EAC1E,CAAC,EACA,IAAI,+BAA+B,CAAC,CAAC,EACrC,IAAI,sBAAsB;AAAA,IACzB,UAAU;AAAA,EACZ,CAAC,EACA,IAAI,cAAc,CAAC,CAAC,EACpB,MAAM;AAEb;;;AC5FA,IAAM,yBAAyB;AAAA,EAC7B,KAAK;AAAA,EACL,QAAQ;AACV;AACA,IAAM,0BAA0B;AAAA,EAC9B,QAAQ;AAAA,EACR,YAAY;AAAA,EACZ,YAAY;AAAA,EACZ,MAAM;AAAA,EACN,OAAO;AACT;AAEO,IAAM,qBAAqB,CAChC,WACA,eACoB;AACpB,MAAI,cAAc,UAAW,QAAO;AACpC,SAAO,GAAG,uBAAuB,SAAgD,CAAC,GAAG,wBAAwB,UAAU,CAAC;AAC1H;;;ACFA,SAAS,oBAAoB;AAC7B;AAAA,EACE;AAAA,EACA;AAAA,EACA;AAAA,EACA;AAAA,EACA;AAAA,OAEK;AAKA,IAAM,8BAA8B,CACzC,MACA,OAAkC,CAAC,MACN;AAC7B,OAAK,gBAAgB;AACrB,QAAM,UAAoC;AAAA,IACxC,MAAM,kBAAkB;AAAA,MACtB,OAAO;AAAA,MACP,YAAY;AAAA,IACd,CAAC;AAAA,IACD,cAAc,kBAAkB;AAAA,MAC9B,OAAO;AAAA,MACP,YAAY;AAAA,IACd,CAAC;AAAA,IACD,QAAQ,kBAAkB;AAAA,MACxB,OAAO;AAAA,MACP,YAAY;AAAA,IACd,CAAC;AAAA,IACD,SAAS,kBAAkB;AAAA,MACzB,OAAO;AAAA,MACP,YAAY;AAAA,IACd,CAAC;AAAA,IACD,MAAM,kBAAkB;AAAA,MACtB,OAAO;AAAA,MACP,YAAY;AAAA,IACd,CAAC;AAAA,IACD,cAAc,kBAAkB;AAAA,MAC9B,OAAO;AAAA,MACP,YAAY;AAAA,IACd,CAAC;AAAA,IACD,QAAQ,kBAAkB;AAAA,MACxB,OAAO;AAAA,MACP,YAAY;AAAA,IACd,CAAC;AAAA,IACD,SAAS,kBAAkB;AAAA,MACzB,OAAO;AAAA,MACP,YAAY;AAAA,IACd,CAAC;AAAA,IACD,WAAW,kBAAkB;AAAA,MAC3B,OAAO;AAAA,IACT,CAAC;AAAA,EACH;AAEA,aAAW,eAAe;AAAA,IACxB;AAAA,IACA;AAAA,IACA;AAAA,IACA;AAAA,IACA;AAAA,IACA;AAAA,IACA;AAAA,IACA;AAAA,EACF,GAAY;AACV,UAAM,SAAS,QAAQ,WAAW;AAClC,uBAAmB,MAAM;AACzB,4BAAwB;AAAA,MACtB;AAAA,MACA;AAAA,MACA;AAAA,IACF,CAAC;AAAA,EACH;AAGA,UAAQ,UAAU;AAAA,IAChB,GAAG,cAAc,EACd,IAAI,4BAA4B;AAAA,MAC/B,iBAAiB;AAAA,MACjB,wBAAwB;AAAA,MACxB,UAAU;AAAA;AAAA,IACZ,CAAC,EACA,MAAM;AAAA,EACX;AAKA,QAAM,MAAM,CAAC,MAAe,KAAK,cAAc,CAAC,IAAI;AAEpD,aAAW,SAAS,CAAC,OAAO,UAAU,SAAS,GAAY;AACzD,eAAW,WAAW,MAAM;AAC1B,UAAI,QAAQ,SAAS,aAAa;AAChC,cAAM,EAAE,MAAM,IAAI;AAClB,mBAAW,CAAC,GAAG,CAAC,KAAK,MAAM,KAAK,GAAG;AAKjC,cAAI,EAAE,eAAe,QAAQ;AAC3B,gBAAI,EAAE,UAAU,OAAO;AACrB,oBAAM,SAAS,QAAQ,mBAAmB,OAAO,QAAQ,CAAC;AAC1D,qBAAO;AAAA,gBACL,GAAG,cAAc,EACd,IAAI,mBAAmB;AAAA,kBACtB,iBAAiB,mBAAmB,QAAQ;AAAA,oBAC1C,aAAa,EAAE;AAAA,kBACjB,CAAC;AAAA,gBACH,CAAC,EACA,IAAI,kBAAkB,EAAE,GAAG,EAAE,GAAG,GAAG,IAAI,EAAE,CAAC,EAAE,CAAC,EAC7C,IAAI,kBAAkB,EAAE,GAAG,EAAE,GAAG,GAAG,IAAI,EAAE,CAAC,EAAE,CAAC,EAC7C,MAAM;AAAA,cACX;AAAA,YACF;AAAA,UACF;AAAA,QACF;AAAA,MACF,WAAW,QAAQ,SAAS,uBAAuB;AACjD,YAAI,QAAQ,UAAU,OAAO;AAC3B,gBAAM,SAAS,QAAQ,mBAAmB,OAAO,YAAY,CAAC;AAC9D,gBAAM,iBAAiB,uCAAuC,OAAO;AACrE,gBAAM,SAAS,cAAc,EAAE,IAAI,mBAAmB;AAAA,YACpD,iBAAiB,mBAAmB,QAAQ,cAAc;AAAA,UAC5D,CAAC;AAED,cAAI,QAAQ,MAAM,SAAS,GAAG;AAC5B,mBAAO,IAAI,kBAAkB;AAAA,cAC3B,GAAG,QAAQ,MAAM,CAAC,EAAE;AAAA,cACpB,GAAG,IAAI,QAAQ,MAAM,CAAC,EAAE,CAAC;AAAA,YAC3B,CAAC;AAAA,UACH;AAGA,mBAAS,IAAI,GAAG,IAAI,QAAQ,MAAM,QAAQ,KAAK;AAC7C,mBAAO,IAAI,kBAAkB;AAAA,cAC3B,GAAG,QAAQ,MAAM,CAAC,EAAE;AAAA,cACpB,GAAG,IAAI,QAAQ,MAAM,CAAC,EAAE,CAAC;AAAA,YAC3B,CAAC;AAAA,UACH;AAEA,iBAAO,KAAK,GAAG,OAAO,MAAM,CAAC;AAAA,QAC/B;AAAA,MACF,WAAW,QAAQ,SAAS,uBAAuB;AACjD,YAAI,QAAQ,UAAU,OAAO;AAG3B,gBAAM,mBAAmB;AACzB,gBAAM,SAAS,QAAQ,mBAAmB,OAAO,YAAY,CAAC;AAC9D,gBAAM,iBAAiB,uCAAuC,OAAO;AACrE,gBAAM,SAAS,cAAc,EAAE,IAAI,mBAAmB;AAAA,YACpD,iBAAiB,mBAAmB,QAAQ,cAAc;AAAA,UAC5D,CAAC;AAED,cAAI,WAAW,QAAQ,gBAAgB;AACvC,cAAI,WAAW,QAAQ,gBAAgB;AACvC,gBAAM,WAAW,QAAQ,YAAY;AACrC,gBAAM,gBAAgB,WAAW;AACjC,gBAAM,aAAa,WAAW;AAE9B,gBAAM,YACJ,QAAQ,KAAK,MAAM,EAAE,EAAE,OAAO,CAAC,OAAO,SAAS;AAC7C,gBAAI,SAAS,KAAK;AAChB,qBAAO,QAAQ,aAAa;AAAA,YAC9B;AACA,mBAAO,QAAQ,WAAW;AAAA,UAC5B,GAAG,CAAC,IAAI;AAEV,gBAAM,aAAa;AAEnB,gBAAM,kBACJ,QAAQ,qBACP,MAKgB;AACf,kBAAM,OAAQ,QAAgB;AAM9B,gBAAI,CAAC,KAAM,QAAO;AAClB,oBAAQ,MAAM;AAAA,cACZ,KAAK;AACH,uBAAO;AAAA,cACT,KAAK;AACH,uBAAO;AAAA,cACT,KAAK;AACH,uBAAO;AAAA,cACT,KAAK;AACH,uBAAO;AAAA,YACX;AAAA,UACF,GAAG,KACH;AAEF,kBAAQ,iBAAiB;AAAA,YACvB,KAAK;AACH;AAAA,YACF,KAAK;AACH,0BAAY,YAAY;AACxB;AAAA,YACF,KAAK;AACH,0BAAY;AACZ;AAAA,YACF,KAAK;AACH,0BAAY,aAAa;AACzB;AAAA,YACF,KAAK;AACH,0BAAY;AACZ,0BAAY,aAAa;AACzB;AAAA,YACF,KAAK;AACH,0BAAY;AACZ;AAAA,YACF,KAAK;AACH,0BAAY,YAAY;AACxB,0BAAY;AACZ;AAAA,YACF,KAAK;AACH,0BAAY;AACZ,0BAAY;AACZ;AAAA,YACF;AACE,0BAAY,YAAY;AACxB,0BAAY,aAAa;AACzB;AAAA,UACJ;AAEA,cAAI,YAAY;AAChB,gBAAM,YAAY;AAElB,cAAI,WAAW,QAAQ,gBAAgB;AACvC,gBAAM,KAAK,YAAY,YAAY;AACnC,gBAAM,KAAK,YAAY,aAAa;AACpC,gBAAM,aAAuB,CAAC;AAG9B,cAAI,QAAQ,UAAU,UAAU;AAC9B,uBAAW;AAAA,cACT,UAAU,IAAI,EAAE;AAAA,cAChB,EAAE,GAAG,IAAI,GAAG,GAAG,GAAG,GAAG,GAAG,GAAG,GAAG,GAAG,GAAG,EAAE;AAAA;AAAA,cACtC,UAAU,CAAC,IAAI,CAAC,EAAE;AAAA,YACpB;AACA,uBAAW,CAAC;AAAA,UACd;AAGA,cAAI,UAAU;AACZ,kBAAM,MAAO,WAAW,KAAK,KAAM;AACnC,uBAAW;AAAA,cACT,UAAU,IAAI,EAAE;AAAA;AAAA,cAChB,OAAO,GAAG;AAAA;AAAA,cACV,UAAU,CAAC,IAAI,CAAC,EAAE;AAAA;AAAA,YACpB;AAAA,UACF;AAGA,qBAAW,QAAQ,QAAQ,KAAK,YAAY,GAAG;AAC7C,gBAAI,SAAS,KAAK;AAChB,2BAAa,aAAa;AAC1B;AAAA,YACF;AAEA,kBAAM,cAAc,aAAa,IAAI,KAAK,CAAC;AAC3C,uBAAW,QAAQ,aAAa;AAC9B,oBAAM,KAAK,YAAY,KAAK,KAAK;AACjC,oBAAM,KAAK,YAAY,KAAK,KAAK;AACjC,oBAAM,KAAK,YAAY,KAAK,KAAK;AACjC,oBAAM,KAAK,YAAY,KAAK,KAAK;AAGjC,kBAAI,KAAK,EAAE,GAAG,IAAI,GAAG,GAAG;AACxB,kBAAI,KAAK,EAAE,GAAG,IAAI,GAAG,GAAG;AAExB,kBAAI,WAAW,SAAS,GAAG;AACzB,sBAAM,kBAAkB,QAAQ,GAAG,UAAU;AAC7C,qBAAK,aAAa,iBAAiB,EAAE;AACrC,qBAAK,aAAa,iBAAiB,EAAE;AAAA,cACvC;AAEA,qBAAO,IAAI,kBAAkB,EAAE,GAAG,GAAG,GAAG,GAAG,IAAI,GAAG,CAAC,EAAE,CAAC;AACtD,qBAAO,IAAI,kBAAkB,EAAE,GAAG,GAAG,GAAG,GAAG,IAAI,GAAG,CAAC,EAAE,CAAC;AAAA,YACxD;AAEA,yBAAa,WAAW;AAAA,UAC1B;AACA,iBAAO,KAAK,GAAG,OAAO,MAAM,CAAC;AAAA,QAC/B;AAAA,MACF,WAAW,QAAQ,SAAS,gBAAgB,QAAQ,UAAU,WAAW;AACvE,YAAI,QAAQ,UAAU,OAAO;AAC3B,qBAAW,UAAU;AAAA,YACnB,QAAQ,mBAAmB,OAAO,QAAQ,CAAC;AAAA,YAC3C,QAAQ,mBAAmB,OAAO,YAAY,CAAC;AAAA,UACjD,GAAG;AACD,kBAAM,iBAAiB,+BAA+B,OAAO;AAC7D,kBAAM,iBAAiB,mBAAmB,QAAQ,cAAc;AAChE,kBAAM,KAAK,cAAc,EAAE,IAAI,mBAAmB;AAAA,cAChD,iBAAiB;AAAA,YACnB,CAAC;AAED,gBAAI,QAAQ,UAAU,kBAAkB,QAAQ,cAAc;AAC5D,iBAAG,IAAI,iBAAiB;AAAA,gBACtB,kBAAkB,QAAQ;AAAA,cAC5B,CAAC;AAAA,YACH;AAEA,eAAG,IAAI,mBAAmB,EAAE,GAAG,QAAQ,GAAG,GAAG,IAAI,QAAQ,CAAC,EAAE,CAAC;AAE7D,gBAAI,QAAQ,UAAU,kBAAkB,QAAQ,cAAc;AAE5D,iBAAG,IAAI,iBAAiB,EAAE,kBAAkB,EAAE,CAAC;AAAA,YACjD;AAEA,mBAAO,KAAK,GAAG,GAAG,MAAM,CAAC;AAAA,UAC3B;AAAA,QACF;AAAA,MACF,WAAW,QAAQ,SAAS,oBAAoB;AAC9C,YAAI,QAAQ,UAAU,OAAO;AAC3B,qBAAW,UAAU,CAAC,QAAQ,mBAAmB,OAAO,OAAO,CAAC,CAAC,GAAG;AAClE,mBAAO;AAAA,cACL,GAAG,cAAc,EACd,IAAI,mBAAmB;AAAA,gBACtB,iBAAiB;AAAA,kBACf;AAAA,kBACA,oCAAoC,OAAO;AAAA,gBAC7C;AAAA,cACF,CAAC,EACA,IAAI,mBAAmB,EAAE,GAAG,QAAQ,GAAG,GAAG,IAAI,QAAQ,CAAC,EAAE,CAAC,EAC1D,MAAM;AAAA,YACX;AAAA,UACF;AAAA,QACF;AAAA,MACF,WAAW,QAAQ,SAAS,mBAAmB;AAC7C,YAAI,QAAQ,OAAO,SAAS,KAAY,GAAG;AACzC,qBAAW,UAAU;AAAA,YACnB,QAAQ,mBAAmB,OAAO,QAAQ,CAAC;AAAA,YAC3C,QAAQ,mBAAmB,OAAO,YAAY,CAAC;AAAA,UACjD,GAAG;AACD,gBAAI,QAAQ,UAAU,QAAQ;AAE5B,oBAAM,uBAAuB;AAAA,gBAC3B,wBAAwB;AAAA,gBACxB,UACE,QAAQ,cAAc,QAAQ,eAC1B,QAAQ,eACR,QAAQ;AAAA,cAChB;AAGA,kBAAI,kBAAkB;AACtB,kBAAI;AACF,kCAAkB;AAAA,kBAChB;AAAA,kBACA;AAAA,gBACF;AAAA,cACF,QAAQ;AACN,kCACE,KAAK;AAAA,kBACH,GAAG,OACA,OAAO,CAAC,QAAQ,qBAAqB,GAAG,EACxC,IAAI,CAAC,QAAS,IAAY,eAAe;AAAA,kBAC5C;AAAA,gBACF,IAAI;AAGN,uBAAO;AAAA,kBACL,GAAG,cAAc,EACd,IAAI,4BAA4B;AAAA,oBAC/B;AAAA,oBACA,GAAG;AAAA,kBACL,CAAC,EACA,MAAM;AAAA,gBACX;AAAA,cACF;AAEA,oBAAM,KAAK,cAAc,EAAE,IAAI,mBAAmB;AAAA,gBAChD;AAAA,cACF,CAAC;AAED,kBAAI,QAAQ,cAAc,QAAQ,cAAc;AAE9C,sBAAM,UAAU,QAAQ,cAAc,QAAQ,gBAAgB;AAC9D,mBAAG,IAAI,mBAAmB;AAAA,kBACxB,GAAG,QAAQ,IAAI;AAAA,kBACf,GAAG,IAAI,QAAQ,CAAC;AAAA,gBAClB,CAAC,EACE,IAAI,kBAAkB;AAAA,kBACrB,GAAG,QAAQ,IAAI;AAAA,kBACf,GAAG,IAAI,QAAQ,CAAC;AAAA,gBAClB,CAAC,EACA,IAAI,kBAAkB;AAAA,kBACrB,GAAG,QAAQ,IAAI;AAAA,kBACf,GAAG,IAAI,QAAQ,CAAC;AAAA,gBAClB,CAAC,EACA,IAAI,mBAAmB;AAAA,kBACtB,GAAG,QAAQ,IAAI;AAAA,kBACf,GAAG,IAAI,QAAQ,CAAC;AAAA,gBAClB,CAAC;AAAA,cACL,OAAO;AAEL,sBAAM,UAAU,QAAQ,eAAe,QAAQ,eAAe;AAC9D,mBAAG,IAAI,mBAAmB;AAAA,kBACxB,GAAG,QAAQ;AAAA,kBACX,GAAG,IAAI,QAAQ,IAAI,MAAM;AAAA,gBAC3B,CAAC,EACE,IAAI,kBAAkB;AAAA,kBACrB,GAAG,QAAQ;AAAA,kBACX,GAAG,IAAI,QAAQ,IAAI,MAAM;AAAA,gBAC3B,CAAC,EACA,IAAI,kBAAkB;AAAA,kBACrB,GAAG,QAAQ;AAAA,kBACX,GAAG,IAAI,QAAQ,IAAI,MAAM;AAAA,gBAC3B,CAAC,EACA,IAAI,mBAAmB;AAAA,kBACtB,GAAG,QAAQ;AAAA,kBACX,GAAG,IAAI,QAAQ,IAAI,MAAM;AAAA,gBAC3B,CAAC;AAAA,cACL;AAEA,qBAAO,KAAK,GAAG,GAAG,MAAM,CAAC;AAAA,YAC3B,OAAO;AACL,oBAAM,iBAAiB,mCAAmC,OAAO;AACjE,qBAAO;AAAA,gBACL,GAAG,cAAc,EACd,IAAI,mBAAmB;AAAA,kBACtB,iBAAiB,mBAAmB,QAAQ,cAAc;AAAA,gBAC5D,CAAC,EACA,IAAI,mBAAmB,EAAE,GAAG,QAAQ,GAAG,GAAG,IAAI,QAAQ,CAAC,EAAE,CAAC,EAC1D,MAAM;AAAA,cACX;AAAA,YACF;AAAA,UACF;AAAA,QACF;AAAA,MACF,WAAW,QAAQ,SAAS,YAAY;AACtC,YAAI,UAAU,WAAW;AACvB,qBAAW,UAAU;AAAA,YACnB,QAAQ,mBAAmB,OAAO,YAAY,CAAC;AAAA,UACjD,GAAG;AACD,gBAAI,QAAQ,eAAe,UAAU;AACnC,sBAAQ;AAAA,gBACN;AAAA,cACF;AACA;AAAA,YACF;AACA,mBAAO;AAAA,cACL,GAAG,cAAc,EACd,IAAI,mBAAmB;AAAA,gBACtB,iBAAiB;AAAA,kBACf;AAAA,kBACA,mCAAmC,OAAO;AAAA,gBAC5C;AAAA,cACF,CAAC,EACA,IAAI,mBAAmB,EAAE,GAAG,QAAQ,GAAG,GAAG,IAAI,QAAQ,CAAC,EAAE,CAAC,EAC1D,MAAM;AAAA,YACX;AAAA,UACF;AAAA,QACF;AAAA,MACF,WAAW,QAAQ,SAAS,WAAW;AACrC,YAAI,QAAQ,OAAO,SAAS,KAAY,GAAG;AACzC,qBAAW,UAAU,CAAC,QAAQ,mBAAmB,OAAO,QAAQ,CAAC,CAAC,GAAG;AACnE,mBAAO;AAAA,cACL,GAAG,cAAc,EACd,IAAI,mBAAmB;AAAA,gBACtB,iBAAiB;AAAA,kBACf;AAAA,kBACA,4BAA4B,OAAO;AAAA,gBACrC;AAAA,cACF,CAAC,EACA,IAAI,mBAAmB,EAAE,GAAG,QAAQ,GAAG,GAAG,IAAI,QAAQ,CAAC,EAAE,CAAC,EAC1D,MAAM;AAAA,YACX;AAAA,UACF;AAAA,QACF;AAAA,MACF,WAAW,QAAQ,SAAS,eAAe,UAAU,WAAW;AAC9D,cAAM,SAAS,QAAQ;AACvB,cAAM,EAAE,OAAO,QAAQ,QAAQ,QAAQ,IAAI;AAC3C,cAAM,cAAc,cAAc,EAAE,IAAI,mBAAmB;AAAA,UACzD,iBAAiB;AAAA,QACnB,CAAC;AACD,YAAI,WAAW,QAAQ,SAAS,GAAG;AACjC,sBAAY,IAAI,kBAAkB,QAAQ,CAAC,CAAC;AAC5C,mBAAS,IAAI,GAAG,IAAI,QAAQ,QAAQ,KAAK;AACvC,wBAAY,IAAI,kBAAkB,QAAQ,CAAC,CAAC;AAAA,UAC9C;AAAA,QACF,OAAO;AACL,sBACG,IAAI,kBAAkB;AAAA,YACrB,GAAG,OAAO,IAAI,QAAQ;AAAA,YACtB,GAAG,IAAI,OAAO,IAAI,SAAS,CAAC;AAAA,UAC9B,CAAC,EACA,IAAI,kBAAkB;AAAA,YACrB,GAAG,OAAO,IAAI,QAAQ;AAAA,YACtB,GAAG,IAAI,OAAO,IAAI,SAAS,CAAC;AAAA,UAC9B,CAAC,EAKA,IAAI,kBAAkB;AAAA,YACrB,GAAG,OAAO,IAAI,QAAQ;AAAA,YACtB,GAAG,IAAI,OAAO,IAAI,SAAS,CAAC;AAAA,UAC9B,CAAC,EAKA,IAAI,kBAAkB;AAAA,YACrB,GAAG,OAAO,IAAI,QAAQ;AAAA,YACtB,GAAG,IAAI,OAAO,IAAI,SAAS,CAAC;AAAA,UAC9B,CAAC,EAKA,IAAI,kBAAkB;AAAA,YACrB,GAAG,OAAO,IAAI,QAAQ;AAAA,YACtB,GAAG,IAAI,OAAO,IAAI,SAAS,CAAC;AAAA,UAC9B,CAAC;AAAA,QACL;AAEA,eAAO,KAAK,GAAG,YAAY,MAAM,CAAC;AAAA,MACpC,WAAW,QAAQ,SAAS,cAAc;AACxC,YAAI,UAAU,WAAW;AACvB,gBAAM,WAAW,QAAQ;AACzB,gBAAM,iBAAiB,cAAc,EAAE,IAAI,mBAAmB;AAAA,YAC5D,iBAAiB;AAAA,UACnB,CAAC;AAED,gBAAM,KAAK;AAEX,cAAI,GAAG,UAAU,QAAQ;AACvB,kBAAM,EAAE,QAAQ,OAAO,QAAQ,SAAS,IAAI;AAC5C,kBAAM,IAAI,QAAQ;AAClB,kBAAM,IAAI,SAAS;AAEnB,kBAAM,SAAS;AAAA,cACb,EAAE,GAAG,CAAC,GAAG,GAAG,EAAE;AAAA;AAAA,cACd,EAAE,GAAG,GAAG,GAAG,EAAE;AAAA;AAAA,cACb,EAAE,GAAG,GAAG,GAAG,CAAC,EAAE;AAAA;AAAA,cACd,EAAE,GAAG,CAAC,GAAG,GAAG,CAAC,EAAE;AAAA;AAAA,YACjB;AAEA,gBAAI,kBAAkB,SAAS;AAC/B,gBAAI,UAAU;AACZ,oBAAM,YAAa,WAAW,KAAK,KAAM;AACzC,gCAAkB,OAAO,SAAS;AAAA,YACpC;AACA,8BAAkB;AAAA,cAChB,UAAU,OAAO,GAAG,OAAO,CAAC;AAAA,cAC5B;AAAA,YACF;AAEA,kBAAM,oBAAoB,OAAO;AAAA,cAAI,CAAC,MACpC,aAAa,iBAAiB,CAAC;AAAA,YACjC;AAEA,2BAAe,IAAI,kBAAkB;AAAA,cACnC,GAAG,kBAAkB,CAAC,EAAE;AAAA,cACxB,GAAG,IAAI,kBAAkB,CAAC,EAAE,CAAC;AAAA,YAC/B,CAAC;AACD,qBAAS,IAAI,GAAG,IAAI,kBAAkB,QAAQ,KAAK;AACjD,6BAAe,IAAI,kBAAkB;AAAA,gBACnC,GAAG,kBAAkB,CAAC,EAAE;AAAA,gBACxB,GAAG,IAAI,kBAAkB,CAAC,EAAE,CAAC;AAAA,cAC/B,CAAC;AAAA,YACH;AACA,2BAAe,IAAI,kBAAkB;AAAA,cACnC,GAAG,kBAAkB,CAAC,EAAE;AAAA,cACxB,GAAG,IAAI,kBAAkB,CAAC,EAAE,CAAC;AAAA,YAC/B,CAAC;AAAA,UACH,WAAW,GAAG,UAAU,UAAU;AAChC,kBAAM,EAAE,QAAQ,OAAO,IAAI;AAG3B,kBAAM,KAAK,EAAE,GAAG,OAAO,IAAI,QAAQ,GAAG,OAAO,EAAE;AAC/C,kBAAM,KAAK,EAAE,GAAG,OAAO,IAAI,QAAQ,GAAG,OAAO,EAAE;AAE/C,2BACG,IAAI,kBAAkB;AAAA,cACrB,GAAG,GAAG;AAAA,cACN,GAAG,IAAI,GAAG,CAAC;AAAA,YACb,CAAC,EACA,IAAI,kDAAkD,CAAC,CAAC,EAExD,IAAI,kBAAkB;AAAA,cACrB,GAAG,GAAG;AAAA,cACN,GAAG,IAAI,GAAG,CAAC;AAAA,cACX,GAAG,CAAC;AAAA,cACJ,GAAG;AAAA,YACL,CAAC,EAEA,IAAI,kBAAkB;AAAA,cACrB,GAAG,GAAG;AAAA,cACN,GAAG,IAAI,GAAG,CAAC;AAAA,cACX,GAAG;AAAA,cACH,GAAG;AAAA,YACL,CAAC,EACA,IAAI,+BAA+B,CAAC,CAAC;AAAA,UAC1C,WAAW,GAAG,UAAU,WAAW;AACjC,kBAAM,EAAE,OAAO,IAAI;AACnB,gBAAI,OAAO,SAAS,GAAG;AACrB,6BAAe,IAAI,kBAAkB;AAAA,gBACnC,GAAG,OAAO,CAAC,EAAE;AAAA,gBACb,GAAG,IAAI,OAAO,CAAC,EAAE,CAAC;AAAA,cACpB,CAAC;AACD,uBAAS,IAAI,GAAG,IAAI,OAAO,QAAQ,KAAK;AACtC,+BAAe,IAAI,kBAAkB;AAAA,kBACnC,GAAG,OAAO,CAAC,EAAE;AAAA,kBACb,GAAG,IAAI,OAAO,CAAC,EAAE,CAAC;AAAA,gBACpB,CAAC;AAAA,cACH;AACA,6BAAe,IAAI,kBAAkB;AAAA,gBACnC,GAAG,OAAO,CAAC,EAAE;AAAA,gBACb,GAAG,IAAI,OAAO,CAAC,EAAE,CAAC;AAAA,cACpB,CAAC;AAAA,YACH;AAAA,UACF;AACA,mBAAS,KAAK,GAAG,eAAe,MAAM,CAAC;AAAA,QACzC;AAAA,MACF,WACE,QAAQ,SAAS,qBACjB,UAAU,QAAQ,OAClB;AACA,cAAM,SAAS,QAAQ,mBAAmB,OAAO,QAAQ,CAAC;AAE1D,cAAM,eAAe,cAAc,EAChC,IAAI,mBAAmB,EAAE,iBAAiB,GAAG,CAAC,EAC9C,IAAI,0BAA0B,CAAC,CAAC;AAEnC,YAAI,QAAQ,UAAU,QAAQ;AAC5B,gBAAM,EAAE,WAAW,IAAI;AACvB,cAAI,CAAC,WAAY;AACjB,gBAAM,EAAE,YAAY,YAAY,IAAI;AAEpC,gBAAM,WAAW,CAAC,SAEZ;AACJ,gBAAI,CAAC,QAAQ,KAAK,SAAS,WAAW,EAAG;AAEzC,yBAAa,IAAI,kBAAkB;AAAA,cACjC,GAAG,KAAK,SAAS,CAAC,EAAE;AAAA,cACpB,GAAG,IAAI,KAAK,SAAS,CAAC,EAAE,CAAC;AAAA,YAC3B,CAAC;AAED,kBAAM,gBAAgB,CAAC,GAAG,KAAK,UAAU,KAAK,SAAS,CAAC,CAAC;AAEzD,qBAAS,IAAI,GAAG,IAAI,cAAc,SAAS,GAAG,KAAK;AACjD,oBAAM,QAAQ,cAAc,CAAC;AAC7B,oBAAM,MAAM,cAAc,IAAI,CAAC;AAE/B,kBAAI,MAAM,SAAS,KAAK,IAAI,MAAM,KAAK,IAAI,MAAM;AAC/C,sBAAM,SACH,KAAK,cAAc,KAAK,KAAM,MAAM;AACvC,oBAAI,QAAQ,GAAG;AAEb,+BAAa;AAAA,oBACX;AAAA,oBACA,CAAC;AAAA,kBACH;AAAA,gBACF,OAAO;AAEL,+BAAa;AAAA,oBACX;AAAA,oBACA,CAAC;AAAA,kBACH;AAAA,gBACF;AAEA,sBAAM,KAAK,EAAE,GAAG,MAAM,GAAG,GAAG,MAAM,EAAE;AACpC,sBAAM,KAAK,EAAE,GAAG,IAAI,GAAG,GAAG,IAAI,EAAE;AAEhC,sBAAM,KAAK,GAAG,IAAI,GAAG;AACrB,sBAAM,KAAK,GAAG,IAAI,GAAG;AACrB,sBAAM,IAAI,KAAK,KAAK,KAAK,KAAK,KAAK,EAAE;AAErC,oBAAI,IAAI,MAAM;AACZ,+BAAa,IAAI,+BAA+B,CAAC,CAAC;AAClD,+BAAa,IAAI,kBAAkB;AAAA,oBACjC,GAAG,IAAI;AAAA,oBACP,GAAG,IAAI,IAAI,CAAC;AAAA,kBACd,CAAC;AACD;AAAA,gBACF;AAEA,sBAAM,QAAQ,KAAK,IAAI,KAAK;AAC5B,sBAAM,QAAQ,IAAI,KAAK,KAAK,KAAK;AACjC,oBAAI,KAAK,IAAI,KAAK,IAAI,QAAQ,CAAC,CAAC,IAAI,MAAM;AACxC,+BAAa,IAAI,+BAA+B,CAAC,CAAC;AAClD,+BAAa,IAAI,kBAAkB;AAAA,oBACjC,GAAG,IAAI;AAAA,oBACP,GAAG,IAAI,IAAI,CAAC;AAAA,kBACd,CAAC;AACD;AAAA,gBACF;AACA,sBAAM,IAAI,KAAK,IAAI,KAAK,IAAI,QAAQ,CAAC;AACrC,sBAAM,SAAS,KAAK,KAAK,SAAS;AAClC,sBAAM,MAAM,KAAK,MAAM,IAAI,EAAE;AAC7B,sBAAM,cAAc,QAAQ,IAAI,QAAQ,CAAC;AACzC,sBAAM,kBAAkB,MAAM;AAC9B,sBAAM,KAAK,GAAG,IAAI,IAAI,KAAK,IAAI,eAAe;AAC9C,sBAAM,KAAK,GAAG,IAAI,IAAI,KAAK,IAAI,eAAe;AAE9C,sBAAM,WAAW,KAAK,GAAG;AACzB,sBAAM,WAAW,KAAK,GAAG;AAEzB,6BAAa,IAAI,kBAAkB;AAAA,kBACjC,GAAG,IAAI;AAAA,kBACP,GAAG,IAAI,IAAI,CAAC;AAAA,kBACZ,GAAG;AAAA,kBACH,GAAG,KAAK,cAAc,CAAC,WAAW;AAAA,gBACpC,CAAC;AAAA,cACH,OAAO;AAEL,6BAAa,IAAI,+BAA+B,CAAC,CAAC;AAClD,6BAAa,IAAI,kBAAkB,EAAE,GAAG,IAAI,GAAG,GAAG,IAAI,IAAI,CAAC,EAAE,CAAC;AAAA,cAChE;AAAA,YACF;AAAA,UACF;AAIA,gBAAM,cAAc,CAAC,SAIhB;AACH,kBAAM,EAAE,SAAS,IAAI;AACrB,gBAAI,CAAC,YAAY,SAAS,WAAW,EAAG,QAAO,EAAE,UAAU,CAAC,EAAE;AAC9D,kBAAM,IAAI,SAAS;AAEnB,kBAAM,eAAe,CAAC,GAAG,QAAQ,EAAE,QAAQ;AAE3C,kBAAM,eAAe,aAAa,IAAI,CAAC,IAAI,MAAM;AAC/C,oBAAM,eAAe,IAAI,IAAI,IAAI,KAAK;AACtC,oBAAM,QAAQ,SAAS,WAAW,EAAE;AACpC,qBAAO,EAAE,GAAG,IAAI,OAAO,QAAQ,CAAC,QAAQ,OAAU;AAAA,YACpD,CAAC;AAED,mBAAO,EAAE,UAAU,aAAa;AAAA,UAClC;AAEA,mBAAS,YAAY,UAAU,CAAC;AAChC,cAAI,aAAa;AACf,uBAAW,cAAc,aAAa;AACpC,uBAAS,YAAY,UAAU,CAAC;AAAA,YAClC;AAAA,UACF;AAAA,QACF,WAAW,QAAQ,UAAU,QAAQ;AACnC,gBAAM,EAAE,QAAQ,OAAO,QAAQ,SAAS,IAAI;AAC5C,gBAAM,IAAK,QAAmB;AAC9B,gBAAM,IAAK,SAAoB;AAE/B,gBAAM,SAAS;AAAA,YACb,EAAE,GAAG,CAAC,GAAG,GAAG,EAAE;AAAA;AAAA,YACd,EAAE,GAAG,GAAG,GAAG,EAAE;AAAA;AAAA,YACb,EAAE,GAAG,GAAG,GAAG,CAAC,EAAE;AAAA;AAAA,YACd,EAAE,GAAG,CAAC,GAAG,GAAG,CAAC,EAAE;AAAA;AAAA,UACjB;AAEA,cAAI,kBAAkB,SAAS;AAC/B,cAAI,UAAU;AACZ,kBAAM,YAAc,WAAsB,KAAK,KAAM;AACrD,8BAAkB,OAAO,SAAS;AAAA,UACpC;AACA,4BAAkB;AAAA,YAChB,UAAU,OAAO,GAAG,OAAO,CAAC;AAAA,YAC5B;AAAA,UACF;AAEA,gBAAM,oBAAoB,OAAO;AAAA,YAAI,CAAC,MACpC,aAAa,iBAAiB,CAAC;AAAA,UACjC;AAEA,uBAAa,IAAI,kBAAkB;AAAA,YACjC,GAAG,kBAAkB,CAAC,EAAE;AAAA,YACxB,GAAG,IAAI,kBAAkB,CAAC,EAAE,CAAC;AAAA,UAC/B,CAAC;AACD,mBAAS,IAAI,GAAG,IAAI,kBAAkB,QAAQ,KAAK;AACjD,yBAAa,IAAI,kBAAkB;AAAA,cACjC,GAAG,kBAAkB,CAAC,EAAE;AAAA,cACxB,GAAG,IAAI,kBAAkB,CAAC,EAAE,CAAC;AAAA,YAC/B,CAAC;AAAA,UACH;AACA,uBAAa,IAAI,kBAAkB;AAAA,YACjC,GAAG,kBAAkB,CAAC,EAAE;AAAA,YACxB,GAAG,IAAI,kBAAkB,CAAC,EAAE,CAAC;AAAA,UAC/B,CAAC;AAAA,QACH,WAAW,QAAQ,UAAU,WAAW;AACtC,gBAAM,EAAE,OAAO,IAAI;AACnB,cAAI,OAAO,SAAS,GAAG;AACrB,yBAAa,IAAI,kBAAkB;AAAA,cACjC,GAAG,OAAO,CAAC,EAAE;AAAA,cACb,GAAG,IAAI,OAAO,CAAC,EAAE,CAAC;AAAA,YACpB,CAAC;AACD,qBAAS,IAAI,GAAG,IAAI,OAAO,QAAQ,KAAK;AACtC,2BAAa,IAAI,kBAAkB;AAAA,gBACjC,GAAG,OAAO,CAAC,EAAE;AAAA,gBACb,GAAG,IAAI,OAAO,CAAC,EAAE,CAAC;AAAA,cACpB,CAAC;AAAA,YACH;AACA,yBAAa,IAAI,kBAAkB;AAAA,cACjC,GAAG,OAAO,CAAC,EAAE;AAAA,cACb,GAAG,IAAI,OAAO,CAAC,EAAE,CAAC;AAAA,YACpB,CAAC;AAAA,UACH;AAAA,QACF;AAEA,qBAAa,IAAI,wBAAwB,CAAC,CAAC;AAE3C,eAAO,KAAK,GAAG,aAAa,MAAM,CAAC;AAAA,MACrC;AAAA,IACF;AAAA,EACF;AAEA,aAAW,OAAO,OAAO,KAAK,OAAO,GAAG;AACtC,YAAQ,GAAqC,EAAE;AAAA,MAC7C,GAAG,cAAc,EAAE,IAAI,eAAe,CAAC,CAAC,EAAE,MAAM;AAAA,IAClD;AAAA,EACF;AAEA,SAAO;AACT;","names":["z","z","z","z","z","z","z","z","z","z","z","z","z","z","z","z","z","z","z","z","z","z","z","z","z","z","z","z","z","z","z","z","z","z","z","z","z","z","z","z","z","z","z","z","z","z","z","z","z","z","z","z","z","z","z","z","z","z","z","z","z","z","z","z","z","z","z","z","z","z","z","z","z","z","z","z","z","z","z","z","z","z","z","z","z","z","z","z","z","z","z","z"]}

package/dist/cli.js

@@ -4,7 +4,7 @@ import {
   convertSoupToGerberCommands,
   stringifyExcellonDrill,
   stringifyGerberCommandLayers
-} from "./chunk-S7RCL42B.js";
+} from "./chunk-GERIAHNJ.js";
 
 // src/cli.ts
 import { program } from "commander";

package/dist/index.d.ts

@@ -284,12 +284,9 @@ declare const gerber_command_map: {
     }>>;
     readonly create_arc: GerberCommandDef<"G75", z.ZodObject<{
         command_code: z.ZodDefault<z.ZodLiteral<"G75">>;
-        arc_parameters: z.ZodString;
     }, "strip", z.ZodTypeAny, {
         command_code: "G75";
-        arc_parameters: string;
     }, {
-        arc_parameters: string;
         command_code?: "G75" | undefined;
     }>>;
     readonly define_aperture: GerberCommandDef<"AD", z.ZodObject<{
@@ -358,6 +355,13 @@ declare const gerber_command_map: {
         y: number;
         command_code?: "D03" | undefined;
     }>>;
+    readonly end_region_statement: GerberCommandDef<"G37", z.ZodObject<{
+        command_code: z.ZodDefault<z.ZodLiteral<"G37">>;
+    }, "strip", z.ZodTypeAny, {
+        command_code: "G37";
+    }, {
+        command_code?: "G37" | undefined;
+    }>>;
     readonly format_specification: GerberCommandDef<"FS", z.ZodObject<{
         command_code: z.ZodDefault<z.ZodLiteral<"FS">>;
         zero_omission_mode: z.ZodDefault<z.ZodNullable<z.ZodUnion<[z.ZodLiteral<"L">, z.ZodLiteral<"T">]>>>;
@@ -397,14 +401,20 @@ declare const gerber_command_map: {
         command_code: z.ZodDefault<z.ZodLiteral<"D01">>;
         x: z.ZodNumber;
         y: z.ZodNumber;
+        i: z.ZodOptional<z.ZodNumber>;
+        j: z.ZodOptional<z.ZodNumber>;
     }, "strip", z.ZodTypeAny, {
         command_code: "D01";
         x: number;
         y: number;
+        i?: number | undefined;
+        j?: number | undefined;
     }, {
         x: number;
         y: number;
         command_code?: "D01" | undefined;
+        i?: number | undefined;
+        j?: number | undefined;
     }>>;
     readonly define_aperture_template: GerberCommandDef<"ADD", z.ZodIntersection<z.ZodUnion<[z.ZodDiscriminatedUnion<"standard_template_code", [z.ZodObject<{
         standard_template_code: z.ZodLiteral<"C">;
@@ -546,18 +556,18 @@ declare const gerber_command_map: {
         command_code?: "ADD" | undefined;
     }>>>;
     readonly set_movement_mode_to_clockwise_circular: GerberCommandDef<"G02", z.ZodObject<{
-        command_code: z.ZodLiteral<"G02">;
+        command_code: z.ZodDefault<z.ZodLiteral<"G02">>;
     }, "strip", z.ZodTypeAny, {
         command_code: "G02";
     }, {
-        command_code: "G02";
+        command_code?: "G02" | undefined;
     }>>;
     readonly set_movement_mode_to_counterclockwise_circular: GerberCommandDef<"G03", z.ZodObject<{
-        command_code: z.ZodLiteral<"G03">;
+        command_code: z.ZodDefault<z.ZodLiteral<"G03">>;
     }, "strip", z.ZodTypeAny, {
         command_code: "G03";
     }, {
-        command_code: "G03";
+        command_code?: "G03" | undefined;
     }>>;
     readonly set_movement_mode_to_linear: GerberCommandDef<"G01", z.ZodObject<{
         command_code: z.ZodDefault<z.ZodLiteral<"G01">>;
@@ -596,6 +606,13 @@ declare const gerber_command_map: {
         polarity: "C" | "D";
         command_code?: "LP" | undefined;
     }>>;
+    readonly start_region_statement: GerberCommandDef<"G36", z.ZodObject<{
+        command_code: z.ZodDefault<z.ZodLiteral<"G36">>;
+    }, "strip", z.ZodTypeAny, {
+        command_code: "G36";
+    }, {
+        command_code?: "G36" | undefined;
+    }>>;
 };
 type AnyGerberCommand = z.infer<(typeof gerber_command_map)[keyof typeof gerber_command_map]["schema"]>;
 

package/dist/index.js

@@ -7,7 +7,7 @@ import {
   stringifyGerberCommand,
   stringifyGerberCommandLayers,
   stringifyGerberCommands
-} from "./chunk-S7RCL42B.js";
+} from "./chunk-GERIAHNJ.js";
 export {
   convertSoupToExcellonDrillCommands,
   convertSoupToGerberCommands,

package/package.json

@@ -1,6 +1,6 @@
 {
   "name": "circuit-json-to-gerber",
-  "version": "0.0.30",
+  "version": "0.0.32",
   "main": "dist/index.js",
   "type": "module",
   "scripts": {
@@ -16,23 +16,22 @@
   },
   "devDependencies": {
     "@biomejs/biome": "^1.8.3",
-    "@tscircuit/core": "^0.0.580",
     "@types/archiver": "^6.0.3",
     "@types/bun": "^1.1.8",
     "@types/node": "^22.5.2",
-    "@types/react": "^18.3.12",
     "archiver": "^7.0.1",
-    "bun-match-svg": "^0.0.3",
+    "react": "^19.1.0",
+    "@types/react": "^19.1.8",
+    "bun-match-svg": "^0.0.13",
     "commander": "^12.1.0",
     "gerber-to-svg": "^4.2.8",
     "pcb-stackup": "^4.2.8",
-    "react": "^18.3.1",
     "tsup": "^8.2.4",
-    "circuit-json": "^0.0.220"
+    "tscircuit": "^0.0.643"
   },
   "peerDependencies": {
     "typescript": "^5.0.0",
-    "circuit-json": "*"
+    "tscircuit": "*"
   },
   "dependencies": {
     "@tscircuit/alphabet": "^0.0.2",

package/dist/chunk-S7RCL42B.js.map

@@ -1 +0,0 @@
-{"version":3,"sources":["../src/excellon-drill/commands/FMAT.ts","../src/excellon-drill/define-excellon-drill-command.ts","../src/excellon-drill/commands/G00.ts","../src/excellon-drill/commands/G01.ts","../src/excellon-drill/commands/G05.ts","../src/excellon-drill/commands/G85.ts","../src/excellon-drill/commands/G90.ts","../src/excellon-drill/commands/M15.ts","../src/excellon-drill/commands/M16.ts","../src/excellon-drill/commands/M30.ts","../src/excellon-drill/commands/M48.ts","../src/excellon-drill/commands/M95.ts","../src/excellon-drill/commands/define_tool.ts","../src/excellon-drill/commands/drill_at.ts","../src/excellon-drill/commands/header_attribute.ts","../src/excellon-drill/commands/header_comment.ts","../src/excellon-drill/commands/rewind.ts","../src/excellon-drill/commands/unit_format.ts","../src/excellon-drill/commands/use_tool.ts","../src/excellon-drill/commands/aper_function_header.ts","../src/excellon-drill/commands/percent_sign.ts","../src/excellon-drill/any-excellon-drill-command-map.ts","../src/excellon-drill/stringify-excellon-drill.ts","../src/excellon-drill/excellon-drill-builder.ts","../src/excellon-drill/convert-soup-to-excellon-drill-commands.ts","../src/gerber/commands/add_attribute_on_aperture.ts","../src/gerber/define-gerber-command.ts","../src/gerber/commands/add_attribute_on_file.ts","../src/gerber/commands/add_attribute_on_object.ts","../src/gerber/commands/aperture_block.ts","../src/gerber/commands/comment.ts","../src/gerber/commands/create_arc.ts","../src/gerber/commands/define_aperture.ts","../src/gerber/commands/define_macro_aperture_template.ts","../src/gerber/commands/delete_attribute.ts","../src/gerber/commands/end_of_file.ts","../src/gerber/commands/end_region_statement.ts","../src/gerber/commands/flash_operation.ts","../src/gerber/stringify-gerber/get-gerber-coordinate-with-padding.ts","../src/gerber/commands/load_mirroring.ts","../src/gerber/commands/load_polarity.ts","../src/gerber/commands/load_rotation.ts","../src/gerber/commands/load_scaling.ts","../src/gerber/commands/move_operation.ts","../src/gerber/commands/plot_operation.ts","../src/gerber/commands/set_coordinate_format.ts","../src/gerber/commands/set_current_aperture_d_code.ts","../src/gerber/commands/set_movement_mode_to_clockwise_circular.ts","../src/gerber/commands/set_movement_mode_to_counterclockwise_circular.ts","../src/gerber/commands/set_movement_mode_to_linear.ts","../src/gerber/commands/set_unit.ts","../src/gerber/commands/start_region_statement.ts","../src/gerber/commands/step_and_repeat.ts","../src/gerber/commands/format_specification.ts","../src/gerber/commands/set_layer_polarity.ts","../src/gerber/commands/define_aperture_template.ts","../src/gerber/commands/select_aperture.ts","../src/gerber/any_gerber_command.ts","../src/gerber/gerber-builder.ts","../src/gerber/stringify-gerber/stringify-gerber-command.ts","../src/gerber/stringify-gerber/stringify-gerber-command-layers.ts","../src/gerber/stringify-gerber/stringify-gerber-commands.ts","../src/gerber/utils/pairs.ts","../src/gerber/convert-soup-to-gerber-commands/define-common-macros.ts","../src/gerber/convert-soup-to-gerber-commands/defineAperturesForLayer.ts","../src/gerber/convert-soup-to-gerber-commands/getAllTraceWidths.ts","../src/gerber/convert-soup-to-gerber-commands/findApertureNumber.ts","../package.json","../src/gerber/convert-soup-to-gerber-commands/getCommandHeaders.ts","../src/gerber/convert-soup-to-gerber-commands/getGerberLayerName.ts","../src/gerber/convert-soup-to-gerber-commands/index.ts"],"sourcesContent":["import { z } from \"zod\"\nimport { defineExcellonDrillCommand } from \"../define-excellon-drill-command\"\n\nexport const FMAT = defineExcellonDrillCommand({\n  command_code: \"FMAT\",\n  schema: z.object({\n    command_code: z.literal(\"FMAT\").default(\"FMAT\"),\n    format: z.number(),\n  }),\n  stringify: (c) => `FMAT,${c.format}`,\n})\n","import type { AnyZodObject, z } from \"zod\"\n\nexport interface ExcellonDrillCommandDef<\n  K extends string,\n  T extends AnyZodObject | z.ZodIntersection<any, any>,\n> {\n  command_code: K\n  schema: T\n  stringify: (c: z.infer<T>) => string\n}\n\nexport const defineExcellonDrillCommand = <\n  K extends string,\n  T extends AnyZodObject | z.ZodIntersection<any, any>,\n>({\n  command_code,\n  schema,\n  stringify,\n}: {\n  command_code: K\n  schema: T\n  stringify: (c: z.infer<T>) => string\n}): ExcellonDrillCommandDef<K, T> => {\n  return {\n    command_code,\n    schema,\n    stringify,\n  }\n}\n","import { z } from \"zod\"\nimport { defineExcellonDrillCommand } from \"../define-excellon-drill-command\"\n\n/**\n * Rapid move without drilling\n */\nexport const G00 = defineExcellonDrillCommand({\n  command_code: \"G00\",\n  schema: z.object({\n    command_code: z.literal(\"G00\").default(\"G00\"),\n  }),\n  stringify: () => \"G00\",\n})\n","import { z } from \"zod\"\nimport { defineExcellonDrillCommand } from \"../define-excellon-drill-command\"\n\n/**\n * Linear move with drilling\n */\nexport const G01 = defineExcellonDrillCommand({\n  command_code: \"G01\",\n  schema: z.object({\n    command_code: z.literal(\"G01\").default(\"G01\"),\n  }),\n  stringify: () => \"G01\",\n})\n","import { z } from \"zod\"\nimport { defineExcellonDrillCommand } from \"../define-excellon-drill-command\"\n\nexport const G05 = defineExcellonDrillCommand({\n  command_code: \"G05\",\n  schema: z.object({\n    command_code: z.literal(\"G05\").default(\"G05\"),\n  }),\n  stringify: () => \"G05\",\n})\n","import { z } from \"zod\"\nimport { defineExcellonDrillCommand } from \"../define-excellon-drill-command\"\n\nexport const G85 = defineExcellonDrillCommand({\n  command_code: \"G85\",\n  schema: z.object({\n    command_code: z.literal(\"G85\").default(\"G85\"),\n  }),\n  stringify: () => \"G85\",\n})\n","import { z } from \"zod\"\nimport { defineExcellonDrillCommand } from \"../define-excellon-drill-command\"\n\nexport const G90 = defineExcellonDrillCommand({\n  command_code: \"G90\",\n  schema: z.object({\n    command_code: z.literal(\"G90\").default(\"G90\"),\n  }),\n  stringify: () => \"G90\",\n})\n","import { z } from \"zod\"\nimport { defineExcellonDrillCommand } from \"../define-excellon-drill-command\"\n\n/**\n * Z-Axis Feed Down\n */\nexport const M15 = defineExcellonDrillCommand({\n  command_code: \"M15\",\n  schema: z.object({\n    command_code: z.literal(\"M15\").default(\"M15\"),\n  }),\n  stringify: () => \"M15\",\n})\n","import { z } from \"zod\"\nimport { defineExcellonDrillCommand } from \"../define-excellon-drill-command\"\n\n/**\n * Z-Axis Feed Up (lift drill up)\n */\nexport const M16 = defineExcellonDrillCommand({\n  command_code: \"M16\",\n  schema: z.object({\n    command_code: z.literal(\"M16\").default(\"M16\"),\n  }),\n  stringify: () => \"M16\",\n})\n","import { z } from \"zod\"\nimport { defineExcellonDrillCommand } from \"../define-excellon-drill-command\"\n\nexport const M30 = defineExcellonDrillCommand({\n  command_code: \"M30\",\n  schema: z.object({\n    command_code: z.literal(\"M30\").default(\"M30\"),\n  }),\n  stringify: () => \"M30\",\n})\n","import { z } from \"zod\"\nimport { defineExcellonDrillCommand } from \"../define-excellon-drill-command\"\n\nexport const M48 = defineExcellonDrillCommand({\n  command_code: \"M48\",\n  schema: z.object({\n    command_code: z.literal(\"M48\").default(\"M48\"),\n  }),\n  stringify: () => \"M48\",\n})\n","import { z } from \"zod\"\nimport { defineExcellonDrillCommand } from \"../define-excellon-drill-command\"\n\nexport const M95 = defineExcellonDrillCommand({\n  command_code: \"M95\",\n  schema: z.object({\n    command_code: z.literal(\"M95\").default(\"M95\"),\n  }),\n  stringify: () => \"M95\",\n})\n","import { z } from \"zod\"\nimport { defineExcellonDrillCommand } from \"../define-excellon-drill-command\"\n\nexport const define_tool = defineExcellonDrillCommand({\n  command_code: \"define_tool\",\n  schema: z.object({\n    command_code: z.literal(\"define_tool\").default(\"define_tool\"),\n    tool_number: z.number(),\n    diameter: z.number(),\n  }),\n  stringify: (c) => `T${c.tool_number}C${c.diameter.toFixed(6)}`,\n})\n","import { z } from \"zod\"\nimport { defineExcellonDrillCommand } from \"../define-excellon-drill-command\"\n\nexport const drill_at = defineExcellonDrillCommand({\n  command_code: \"drill_at\",\n  schema: z.object({\n    command_code: z.literal(\"drill_at\").default(\"drill_at\"),\n    x: z.number(),\n    y: z.number(),\n  }),\n  stringify: (c) => `X${c.x.toFixed(4)}Y${c.y.toFixed(4)}`,\n})\n","import { z } from \"zod\"\nimport { defineExcellonDrillCommand } from \"../define-excellon-drill-command\"\n\nexport const header_attribute = defineExcellonDrillCommand({\n  command_code: \"header_attribute\",\n  schema: z.object({\n    command_code: z.literal(\"header_attribute\").default(\"header_attribute\"),\n    attribute_name: z.string(),\n    attribute_value: z.string(),\n  }),\n  stringify({ attribute_name, attribute_value }) {\n    return `; #@! ${attribute_name},${attribute_value}`\n  },\n})\n","import { z } from \"zod\"\nimport { defineExcellonDrillCommand } from \"../define-excellon-drill-command\"\n\nexport const header_comment = defineExcellonDrillCommand({\n  command_code: \"header_comment\",\n  schema: z.object({\n    command_code: z.literal(\"header_comment\").default(\"header_comment\"),\n    text: z.string(),\n  }),\n  stringify({ text }) {\n    return `; ${text}`\n  },\n})\n","import { z } from \"zod\"\nimport { defineExcellonDrillCommand } from \"../define-excellon-drill-command\"\n\nexport const rewind = defineExcellonDrillCommand({\n  command_code: \"rewind\",\n  schema: z.object({\n    command_code: z.literal(\"rewind\").default(\"rewind\"),\n  }),\n  stringify: () => \"%\",\n})\n","import { z } from \"zod\"\nimport { defineExcellonDrillCommand } from \"../define-excellon-drill-command\"\n\nexport const unit_format = defineExcellonDrillCommand({\n  command_code: \"unit_format\",\n  schema: z.object({\n    command_code: z.literal(\"unit_format\").default(\"unit_format\"),\n    unit: z.union([z.literal(\"INCH\"), z.literal(\"METRIC\")]),\n    lz: z\n      .union([z.literal(\"LZ\"), z.literal(\"TZ\")])\n      .nullable()\n      .default(null),\n  }),\n  stringify(c) {\n    return `${c.unit}${!c.lz ? \"\" : `,${c.lz}`}`\n  },\n})\n","import { z } from \"zod\"\nimport { defineExcellonDrillCommand } from \"../define-excellon-drill-command\"\n\nexport const use_tool = defineExcellonDrillCommand({\n  command_code: \"use_tool\",\n  schema: z.object({\n    command_code: z.literal(\"use_tool\").default(\"use_tool\"),\n    tool_number: z.number(),\n  }),\n  stringify: (c) => `T${c.tool_number}`,\n})\n","import { z } from \"zod\"\nimport { defineExcellonDrillCommand } from \"../define-excellon-drill-command\"\n\nexport const aper_function_header = defineExcellonDrillCommand({\n  command_code: \"aper_function_header\",\n  schema: z.object({\n    command_code: z\n      .literal(\"aper_function_header\")\n      .default(\"aper_function_header\"),\n    is_plated: z.boolean(),\n  }),\n  stringify({ is_plated }) {\n    if (!is_plated) {\n      throw new Error(\"not implemented\")\n    }\n    return \"; #@! TA.AperFunction,Plated,PTH,ComponentDrill\"\n  },\n})\n","import { z } from \"zod\"\nimport { defineExcellonDrillCommand } from \"../define-excellon-drill-command\"\n\nexport const percent_sign = defineExcellonDrillCommand({\n  command_code: \"percent_sign\",\n  schema: z.object({\n    command_code: z.literal(\"percent_sign\").default(\"percent_sign\"),\n  }),\n  stringify: () => \"%\",\n})\n","import type { z } from \"zod\"\nimport type { ExcellonDrillCommandDef } from \"./define-excellon-drill-command\"\nimport * as EDCMD from \"./commands\"\n\nexport const excellon_drill_command_map = {\n  G00: EDCMD.G00,\n  G01: EDCMD.G01,\n  G85: EDCMD.G85,\n  M48: EDCMD.M48,\n  M95: EDCMD.M95,\n  FMAT: EDCMD.FMAT,\n  unit_format: EDCMD.unit_format,\n  aper_function_header: EDCMD.aper_function_header,\n  percent_sign: EDCMD.percent_sign,\n  T: EDCMD.define_tool,\n  define_tool: EDCMD.define_tool,\n  use_tool: EDCMD.use_tool,\n  G90: EDCMD.G90,\n  G05: EDCMD.G05,\n  M15: EDCMD.M15,\n  M16: EDCMD.M16,\n  M30: EDCMD.M30,\n  drill_at: EDCMD.drill_at,\n  header_comment: EDCMD.header_comment,\n  header_attribute: EDCMD.header_attribute,\n  rewind: EDCMD.rewind,\n} satisfies Record<string, ExcellonDrillCommandDef<string, any>>\n\nexport type AnyExcellonDrillCommand = z.infer<\n  (typeof excellon_drill_command_map)[keyof typeof excellon_drill_command_map][\"schema\"]\n>\n","import {\n  type AnyExcellonDrillCommand,\n  excellon_drill_command_map,\n} from \"./any-excellon-drill-command-map\"\n\nexport const stringifyExcellonDrill = (\n  commands: Array<AnyExcellonDrillCommand>,\n) => {\n  return commands\n    .map((c) => {\n      const def = excellon_drill_command_map[c.command_code]\n      return def.stringify(c as any)\n    })\n    .join(\"\\n\")\n}\n","import type { z } from \"zod\"\nimport {\n  type AnyExcellonDrillCommand,\n  excellon_drill_command_map,\n} from \"./any-excellon-drill-command-map\"\n\nclass ExcellonDrillBuilder {\n  commands: Array<AnyExcellonDrillCommand>\n\n  constructor() {\n    this.commands = []\n  }\n\n  add<T extends keyof typeof excellon_drill_command_map>(\n    cmd: T,\n    props: z.input<(typeof excellon_drill_command_map)[T][\"schema\"]>,\n  ): ExcellonDrillBuilder {\n    this.commands.push({\n      ...({\n        command_code: excellon_drill_command_map[cmd].command_code,\n      } as any),\n      ...props,\n    })\n    return this\n  }\n\n  build(): Array<AnyExcellonDrillCommand> {\n    return this.commands\n  }\n}\n\nexport const excellonDrill = () => new ExcellonDrillBuilder()\n","import type { AnyCircuitElement } from \"circuit-json\"\nimport type { AnyExcellonDrillCommand } from \"./any-excellon-drill-command-map\"\nimport { excellonDrill } from \"./excellon-drill-builder\"\n\nexport const convertSoupToExcellonDrillCommands = ({\n  circuitJson,\n  is_plated,\n  flip_y_axis = false,\n}: {\n  circuitJson: Array<AnyCircuitElement>\n  is_plated: boolean\n  flip_y_axis?: boolean\n}): Array<AnyExcellonDrillCommand> => {\n  const builder = excellonDrill()\n\n  // Start sequence commands\n  builder.add(\"M48\", {})\n\n  // Add header comments\n  const date_str = new Date().toISOString()\n  builder\n    .add(\"header_comment\", {\n      text: `DRILL file {tscircuit} date ${date_str}`,\n    })\n    .add(\"header_comment\", {\n      text: \"FORMAT={-:-/ absolute / metric / decimal}\",\n    })\n    .add(\"header_attribute\", {\n      attribute_name: \"TF.CreationDate\",\n      attribute_value: date_str,\n    })\n    .add(\"header_attribute\", {\n      attribute_name: \"TF.GenerationSoftware\",\n      attribute_value: \"tscircuit\",\n    })\n    .add(\"header_attribute\", {\n      attribute_name: \"TF.FileFunction\",\n      attribute_value: \"Plated,1,2,PTH\",\n    })\n    .add(\"FMAT\", { format: 2 }) // Assuming format 2 for the example\n    .add(\"unit_format\", { unit: \"METRIC\", lz: null })\n\n  let tool_counter = 10 // Start tool numbering from 10 for example\n\n  const diameterToToolNumber: Record<number, number> = {}\n\n  // Define tools\n  for (const element of circuitJson) {\n    if (\n      element.type === \"pcb_plated_hole\" ||\n      element.type === \"pcb_hole\" ||\n      element.type === \"pcb_via\"\n    ) {\n      let hole_diameter: number | undefined\n\n      if (\"hole_diameter\" in element) {\n        hole_diameter = element.hole_diameter\n      } else if (\n        element.type === \"pcb_plated_hole\" &&\n        element.shape === \"pill\"\n      ) {\n        // For pill shapes, use the minimum dimension as the hole diameter\n        hole_diameter = Math.min(element.hole_width, element.hole_height)\n      }\n\n      if (!hole_diameter) continue\n\n      if (!diameterToToolNumber[hole_diameter]) {\n        builder.add(\"aper_function_header\", {\n          is_plated: true,\n        })\n        builder.add(\"define_tool\", {\n          tool_number: tool_counter,\n          diameter: hole_diameter,\n        })\n        diameterToToolNumber[hole_diameter] = tool_counter\n        tool_counter++\n      }\n    }\n  }\n\n  builder.add(\"percent_sign\", {})\n  builder.add(\"G90\", {})\n  builder.add(\"G05\", {})\n\n  // Execute drills for tool N\n  for (let i = 10; i < tool_counter; i++) {\n    builder.add(\"use_tool\", { tool_number: i })\n    for (const element of circuitJson) {\n      if (\n        element.type === \"pcb_plated_hole\" ||\n        element.type === \"pcb_hole\" ||\n        element.type === \"pcb_via\"\n      ) {\n        if (\n          !is_plated &&\n          (element.type === \"pcb_plated_hole\" || element.type === \"pcb_via\")\n        )\n          continue\n        let hole_diameter: number | undefined\n\n        if (\"hole_diameter\" in element) {\n          hole_diameter = element.hole_diameter\n        }\n\n        if (element.type === \"pcb_plated_hole\" && element.shape === \"pill\") {\n          hole_diameter = Math.min(element.hole_width, element.hole_height)\n\n          // For pill shapes, we need to route the hole\n          if (diameterToToolNumber[hole_diameter] === i) {\n            const y_multiplier = flip_y_axis ? -1 : 1\n\n            if (element.hole_width > element.hole_height) {\n              // Horizontal pill\n              const offset = (element.hole_width - element.hole_height) / 2\n              builder\n                .add(\"G00\", {})\n                .add(\"drill_at\", {\n                  x: element.x - offset,\n                  y: element.y * y_multiplier,\n                })\n                .add(\"M15\", {})\n                .add(\"G01\", {})\n                .add(\"drill_at\", {\n                  x: element.x + offset,\n                  y: element.y * y_multiplier,\n                })\n                .add(\"M16\", {})\n                .add(\"G05\", {})\n            } else {\n              // Vertical pill\n              const offset = (element.hole_height - element.hole_width) / 2\n              builder\n                .add(\"G00\", {})\n                .add(\"drill_at\", {\n                  x: element.x,\n                  y: (element.y - offset) * y_multiplier,\n                })\n                .add(\"M15\", {})\n                .add(\"G01\", {})\n                .add(\"drill_at\", {\n                  x: element.x,\n                  y: (element.y + offset) * y_multiplier,\n                })\n                .add(\"M16\", {})\n                .add(\"G05\", {})\n            }\n          }\n        } else if (!hole_diameter) continue\n        else if (diameterToToolNumber[hole_diameter] === i) {\n          builder.add(\"drill_at\", {\n            x: element.x,\n            y: element.y * (flip_y_axis ? -1 : 1),\n          })\n        }\n      }\n    }\n  }\n\n  builder.add(\"M30\", {})\n\n  return builder.build()\n}\n","import { z } from \"zod\"\nimport { defineGerberCommand } from \"../define-gerber-command\"\n\nexport const add_attribute_on_aperture = defineGerberCommand({\n  command_code: \"TA\",\n  schema: z\n    .object({\n      command_code: z.literal(\"TA\").default(\"TA\"),\n      attribute_name: z.string(),\n      attribute_value: z.string(),\n    })\n    .describe(\n      \"Add attribute on aperture: Add an aperture attribute to the dictionary or modify it.\",\n    ),\n  stringify: ({ attribute_name, attribute_value }) => {\n    return `%TA${attribute_name},${attribute_value}*%`\n  },\n})\n","import type { AnyZodObject, z, ZodObject, ZodUnion } from \"zod\"\n\nexport interface GerberCommandDef<\n  K extends string,\n  T extends AnyZodObject | z.ZodIntersection<any, any>,\n> {\n  command_code: K\n  schema: T\n  stringify: (c: z.infer<T>) => string\n}\n\nexport const defineGerberCommand = <\n  K extends string,\n  T extends AnyZodObject | z.ZodIntersection<any, any>,\n>({\n  command_code,\n  schema,\n  stringify,\n}: {\n  command_code: K\n  schema: T\n  stringify: (c: z.infer<T>) => string\n}): GerberCommandDef<K, T> => {\n  return {\n    command_code,\n    schema,\n    stringify,\n  }\n}\n","import { z } from \"zod\"\nimport { defineGerberCommand } from \"../define-gerber-command\"\n\nexport const add_attribute_on_file = defineGerberCommand({\n  command_code: \"TF\",\n  schema: z\n    .object({\n      command_code: z.literal(\"TF\").default(\"TF\"),\n      attribute_name: z.string(),\n      attribute_value: z.string(),\n    })\n    .describe(\"Add attribute on file: Set a file attribute.\"),\n  stringify: ({ attribute_name, attribute_value }) => {\n    return `%TF.${attribute_name},${attribute_value}*%`\n  },\n})\n","import { z } from \"zod\"\nimport { defineGerberCommand } from \"../define-gerber-command\"\n\nexport const add_attribute_on_object = defineGerberCommand({\n  command_code: \"TO\",\n  schema: z\n    .object({\n      command_code: z.literal(\"TO\").default(\"TO\"),\n      attribute_name: z.string(),\n      attribute_value: z.string(),\n    })\n    .describe(\n      \"Add attribute on object: Add an object attribute to the dictionary or modify it.\",\n    ),\n  stringify: ({ attribute_name, attribute_value }) => {\n    return `%TO${attribute_name},${attribute_value}*%`\n  },\n})\n\nexport type AddAttributeOnObject = z.infer<\n  typeof add_attribute_on_object.schema\n>\n","import { z } from \"zod\"\nimport { defineGerberCommand } from \"../define-gerber-command\"\n\nexport const aperture_block = defineGerberCommand({\n  command_code: \"AB\",\n  schema: z\n    .object({\n      command_code: z.literal(\"AB\").default(\"AB\"),\n      block: z.string(),\n    })\n    .describe(\n      \"Aperture block: Opens a block aperture statement and assigns its aperture number or closes a block aperture statement\",\n    ),\n  stringify() {\n    return \"\"\n  },\n})\n\nexport type ApertureBlock = z.infer<typeof aperture_block.schema>\n","import { z } from \"zod\"\nimport { defineGerberCommand } from \"../define-gerber-command\"\n\nexport const comment = defineGerberCommand({\n  command_code: \"G04\",\n  schema: z\n    .object({\n      command_code: z.literal(\"G04\").default(\"G04\"),\n      comment: z.string(),\n    })\n    .describe(\n      \"Comment: A human readable comment, does not affect the image. 4.1\",\n    ),\n  stringify: (c) => {\n    return `G04 ${c.comment}*`\n  },\n})\n\nexport type Comment = z.infer<typeof comment.schema>\n","import { z } from \"zod\"\nimport { defineGerberCommand } from \"../define-gerber-command\"\n\nexport const create_arc = defineGerberCommand({\n  command_code: \"G75\",\n  schema: z\n    .object({\n      command_code: z.literal(\"G75\").default(\"G75\"),\n      arc_parameters: z.string(),\n    })\n    .describe(\n      \"Create arc: A G75 must be called before creating the first arc.\",\n    ),\n  stringify() {\n    return \"\"\n  },\n})\n\nexport type CreateArc = z.infer<typeof create_arc.schema>\n","import { z } from \"zod\"\nimport { defineGerberCommand } from \"../define-gerber-command\"\n\nexport const define_aperture = defineGerberCommand({\n  command_code: \"AD\",\n  schema: z\n    .object({\n      command_code: z.literal(\"AD\").default(\"AD\"),\n      aperture_code: z.string(),\n    })\n    .describe(\n      \"Aperture define: Defines a template-based aperture, assigns a D code to it. 4.3\",\n    ),\n  stringify() {\n    return \"\"\n  },\n})\n\nexport type DefineAperture = z.infer<typeof define_aperture.schema>\n","import { z } from \"zod\"\nimport { defineGerberCommand } from \"../define-gerber-command\"\n\nexport const define_macro_aperture_template = defineGerberCommand({\n  command_code: \"AM\",\n  schema: z\n    .object({\n      command_code: z.literal(\"AM\").default(\"AM\"),\n      macro_name: z.string(),\n      template_code: z.string(),\n    })\n    .describe(\"Aperture macro: Defines a macro aperture template. 4.5\"),\n  stringify({ macro_name, template_code }) {\n    return `%AM${macro_name}*\\n${template_code}%`\n  },\n})\n\nexport type DefineMacroApertureTemplate = z.infer<\n  typeof define_macro_aperture_template.schema\n>\n","import { z } from \"zod\"\nimport { defineGerberCommand } from \"../define-gerber-command\"\n\nexport const delete_attribute = defineGerberCommand({\n  command_code: \"TD\",\n  schema: z\n    .object({\n      command_code: z.literal(\"TD\").default(\"TD\"),\n      attribute: z.string().optional(),\n    })\n    .describe(\n      \"Delete attribute: Attribute delete Delete one or all attributes in the dictionary.\",\n    ),\n  stringify({ attribute }) {\n    if (!attribute) {\n      return \"%TD*%\"\n    }\n    return `%TD${attribute}*%`\n  },\n})\n","import { z } from \"zod\"\nimport { defineGerberCommand } from \"../define-gerber-command\"\n\nexport const end_of_file = defineGerberCommand({\n  command_code: \"M02\",\n  schema: z\n    .object({\n      command_code: z.literal(\"M02\").default(\"M02\"),\n    })\n    .describe(\"End of file: 4.13\"),\n  stringify() {\n    return \"M02*\"\n  },\n})\n","import { z } from \"zod\"\n\nexport const end_region_statement = z\n  .object({\n    command_code: z.literal(\"G37\"),\n    statement: z.string(),\n  })\n  .describe(\"End region statement: Ends the region statement\")\n\nexport type EndRegionStatement = z.infer<typeof end_region_statement>\n","import { z } from \"zod\"\nimport { defineGerberCommand } from \"../define-gerber-command\"\nimport { getGerberCoordinateWithPadding } from \"../stringify-gerber/get-gerber-coordinate-with-padding\"\n\nexport const flash_operation = defineGerberCommand({\n  command_code: \"D03\",\n  schema: z\n    .object({\n      command_code: z.literal(\"D03\").default(\"D03\"),\n      x: z.number(),\n      y: z.number(),\n    })\n    .describe(\n      \"Flash operation: Creates a flash object with the current aperture. The current point is moved to the flash point.\",\n    ),\n  stringify({ x, y }) {\n    const [gx, gy] = [x, y].map((coord) =>\n      getGerberCoordinateWithPadding(coord),\n    )\n    return `X${gx}Y${gy}D03*`\n  },\n})\n\nexport type FlashOperation = z.infer<typeof flash_operation.schema>\n","/**\n * Retrieves the Gerber coordinate with padding.\n *\n * Example Gerber coordinate strings:\n * full string: X110550000Y-85000000D03*\n * formatted coordinate for X: 110550000\n *\n * Example inputs/outputs:\n * input: 110.55\n * output: 110550000\n *\n * @param coordinate_mm - The coordinate value in millimeters.\n * @returns The Gerber coordinate with padding.\n */\nexport const getGerberCoordinateWithPadding = (\n  coordinate_mm: number,\n): string => {\n  const coordinate_um = coordinate_mm * 1000000 // Convert millimeters to micrometers\n  let coordinate_str = coordinate_um.toFixed(0) // Convert to string without decimal places\n  // add left padding\n  while (coordinate_str.length < 9) {\n    if (coordinate_um < 0) {\n      coordinate_str = `-0${coordinate_str.slice(1)}`\n    } else {\n      coordinate_str = `0${coordinate_str}`\n    }\n  }\n  return coordinate_str\n}\n","import { z } from \"zod\"\n\nexport const load_mirroring = z\n  .object({\n    command_code: z.literal(\"LM\"),\n    mirroring: z.string(),\n  })\n  .describe(\"Load mirroring: Loads the mirror object transformation parameter.\")\n\nexport type LoadMirroring = z.infer<typeof load_mirroring>\n","import { z } from \"zod\"\n\nexport const load_polarity = z\n  .object({\n    command_code: z.literal(\"LP\"),\n    polarity: z.string(),\n  })\n  .describe(\n    \"Load polarity: Loads the polarity object transformation parameter.\",\n  )\n\nexport type LoadPolarity = z.infer<typeof load_polarity>\n","import { z } from \"zod\"\nimport { defineGerberCommand } from \"../define-gerber-command\"\n\nexport const load_rotation = defineGerberCommand({\n  command_code: \"LR\",\n  schema: z\n    .object({\n      command_code: z.literal(\"LR\").default(\"LR\"),\n      rotation_degrees: z.number(),\n    })\n    .describe(\n      \"Load rotation: Loads the rotation object transformation parameter.\",\n    ),\n  stringify: ({ rotation_degrees }) => {\n    return `%LR${rotation_degrees}*%`\n  },\n})\n\nexport type LoadRotation = z.infer<typeof load_rotation.schema>\n","import { z } from \"zod\"\n\nexport const load_scaling = z\n  .object({\n    command_code: z.literal(\"LS\"),\n    scaling: z.string(),\n  })\n  .describe(\"Load scaling: Loads the scale object transformation parameter.\")\n\nexport type LoadScaling = z.infer<typeof load_scaling>\n","import { getGerberCoordinateWithPadding } from \"./../stringify-gerber/get-gerber-coordinate-with-padding\"\nimport { z } from \"zod\"\nimport { defineGerberCommand } from \"../define-gerber-command\"\n\nexport const move_operation = defineGerberCommand({\n  command_code: \"D02\",\n  schema: z\n    .object({\n      command_code: z.literal(\"D02\").default(\"D02\"),\n      x: z.number(),\n      y: z.number(),\n    })\n    .describe(\n      \"Move operation: D02 moves the current point to the coordinate in the command. It does not create an object.\",\n    ),\n  stringify({ x, y }) {\n    const [gx, gy] = [x, y].map((coord) =>\n      getGerberCoordinateWithPadding(coord),\n    )\n    return `X${gx}Y${gy}D02*`\n  },\n})\n","import { z } from \"zod\"\nimport { defineGerberCommand } from \"../define-gerber-command\"\nimport { getGerberCoordinateWithPadding } from \"../stringify-gerber/get-gerber-coordinate-with-padding\"\n\nexport const plot_operation = defineGerberCommand({\n  command_code: \"D01\",\n  schema: z\n    .object({\n      command_code: z.literal(\"D01\").default(\"D01\"),\n      x: z.number(),\n      y: z.number(),\n    })\n    .describe(\n      \"Plot operation: Outside a region statement D01 creates a draw or arc object with the current aperture. Inside it adds a draw/arc segment to the contour under construction. The current point is moved to draw/arc end point after the creation of the draw/arc.\",\n    ),\n  stringify({ x, y }) {\n    const [gx, gy] = [x, y].map((coord) =>\n      getGerberCoordinateWithPadding(coord),\n    )\n    return `X${gx}Y${gy}D01*`\n  },\n})\n","import { z } from \"zod\"\n\nexport const set_coordinate_format = z\n  .object({\n    command_code: z.literal(\"FS\"),\n    format: z.string(),\n  })\n  .describe(\"Sets the coordinate format, e.g. the number of decimals.\")\nexport type SetCoordinateFormat = z.infer<typeof set_coordinate_format>\n","import { z } from \"zod\"\n\nexport const set_current_aperture_d_code = z\n  .object({\n    command_code: z.literal(\"Dnn\"),\n    d_code: z.string(),\n  })\n  .describe(\"(nn≥10) Sets the current aperture to D code nn. 4.6\")\n\nexport type SetCurrentApertureDCode = z.infer<\n  typeof set_current_aperture_d_code\n>\n","import { z } from \"zod\"\nimport { defineGerberCommand } from \"../define-gerber-command\"\n\nexport const set_movement_mode_to_clockwise_circular = defineGerberCommand({\n  command_code: \"G02\",\n  schema: z\n    .object({\n      command_code: z.literal(\"G02\"),\n    })\n    .describe(\n      \"Set movement mode to clockwise circular: Sets linear/circular mode to clockwise circular.\",\n    ),\n  stringify() {\n    return \"G02*\"\n  },\n})\n","import { z } from \"zod\"\nimport { defineGerberCommand } from \"../define-gerber-command\"\n\nexport const set_movement_mode_to_counterclockwise_circular =\n  defineGerberCommand({\n    command_code: \"G03\", // Add the missing command_code property\n    schema: z\n      .object({\n        command_code: z.literal(\"G03\"),\n      })\n      .describe(\n        \"Set movement mode to counterclockwise circular: Sets linear/circular mode to counterclockwise circular.\",\n      ),\n    stringify() {\n      return \"G03*\"\n    },\n  })\n","import { z } from \"zod\"\nimport { defineGerberCommand } from \"../define-gerber-command\"\n\nexport const set_movement_mode_to_linear = defineGerberCommand({\n  command_code: \"G01\",\n  schema: z\n    .object({\n      command_code: z.literal(\"G01\").default(\"G01\"),\n    })\n    .describe(\n      \"Set movement mode to linear: Sets linear/circular mode to linear.\",\n    ),\n  stringify() {\n    return \"G01*\"\n  },\n})\n","import { z } from \"zod\"\nimport { defineGerberCommand } from \"../define-gerber-command\"\n\nexport const set_unit = defineGerberCommand({\n  command_code: \"MO\",\n  schema: z\n    .object({\n      command_code: z.literal(\"MO\").default(\"MO\"),\n      unit: z.enum([\"MM\", \"in\"]),\n    })\n    .describe(\"Mode: Sets the unit to mm or inch. 4.2.1\"),\n  stringify({ unit }) {\n    return `%MO${unit}*%`\n  },\n})\n","import { z } from \"zod\"\n\nexport const start_region_statement = z\n  .object({\n    command_code: z.literal(\"G36\"),\n    statement: z.string(),\n  })\n  .describe(\n    \"Start region statement: Starts a region statement which creates a region by defining its contours.\",\n  )\n\nexport type StartRegionStatement = z.infer<typeof start_region_statement>\n","import { z } from \"zod\"\n\nexport const step_and_repeat = z\n  .object({\n    command_code: z.literal(\"SR\"),\n    statement: z.string(),\n  })\n  .describe(\"Step and repeat: Open or closes a step and repeat statement.\")\n\nexport type StepAndRepeat = z.infer<typeof step_and_repeat>\n","import { z } from \"zod\"\nimport { defineGerberCommand } from \"../define-gerber-command\"\n\nexport const format_specification = defineGerberCommand({\n  command_code: \"FS\",\n  schema: z.object({\n    command_code: z.literal(\"FS\").default(\"FS\"),\n    zero_omission_mode: z\n      .union([z.literal(\"L\").describe(\"leading zeros omitted\"), z.literal(\"T\")])\n      .nullable()\n      .default(null),\n    coordinate_notation: z\n      .union([\n        z.literal(\"A\").describe(\"absolute notation\"),\n        z.literal(\"I\").describe(\"incremental notation\"),\n      ])\n      .default(\"A\"),\n    x_integer_digits: z.number().int().default(4),\n    x_decimal_digits: z.number().int().default(6),\n    y_integer_digits: z.number().int().default(4),\n    y_decimal_digits: z.number().int().default(6),\n  }),\n  stringify: () => {\n    return \"%FSLAX46Y46*%\"\n  },\n})\n\nexport type FormatSpecification = z.infer<typeof format_specification.schema>\n","import { z } from \"zod\"\nimport { defineGerberCommand } from \"../define-gerber-command\"\n\nexport const set_layer_polarity = defineGerberCommand({\n  command_code: \"LP\",\n  schema: z\n    .object({\n      command_code: z.literal(\"LP\").default(\"LP\"),\n      polarity: z.enum([\"D\", \"C\"]),\n    })\n    .describe(\n      \"Layer Polarity: Sets the layer polarity to dark or clear. 4.2.1\",\n    ),\n  stringify({ polarity }) {\n    return `%LP${polarity}*%`\n  },\n})\n","import { z } from \"zod\"\nimport { defineGerberCommand } from \"../define-gerber-command\"\nimport { getGerberCoordinateWithPadding } from \"../stringify-gerber/get-gerber-coordinate-with-padding\"\n\nconst circle_template = z.object({\n  standard_template_code: z.literal(\"C\").describe(\"circle\"),\n  diameter: z.number(),\n  hole_diameter: z.number().optional(),\n})\n\nconst rectangle_template = z.object({\n  standard_template_code: z.literal(\"R\").describe(\"rectangle\"),\n  x_size: z.number(),\n  y_size: z.number(),\n  hole_diameter: z.number().optional(),\n})\n\nconst obround_template = z.object({\n  standard_template_code: z.literal(\"O\").describe(\"obround\"),\n  x_size: z.number(),\n  y_size: z.number(),\n  hole_diameter: z.number().optional(),\n})\n\nconst polygon_template = z.object({\n  standard_template_code: z.literal(\"P\").describe(\"polygon\"),\n  outer_diameter: z.number(),\n  number_of_vertices: z.number().int(),\n  rotation: z.number().optional(),\n  hole_diameter: z.number().optional(),\n})\n\nconst standard_aperture_template_config = z.discriminatedUnion(\n  \"standard_template_code\",\n  [circle_template, rectangle_template, obround_template, polygon_template],\n)\n\nconst horz_pill_template = z.object({\n  macro_name: z.literal(\"HORZPILL\"),\n  x_size: z.number(),\n  y_size: z.number(),\n  circle_diameter: z.number(),\n  circle_center_offset: z.number(),\n})\n\nconst vert_pill_template = z.object({\n  macro_name: z.literal(\"VERTPILL\"),\n  x_size: z.number(),\n  y_size: z.number(),\n  circle_diameter: z.number(),\n  circle_center_offset: z.number(),\n})\n\nconst roundrect_template = z.object({\n  macro_name: z.literal(\"ROUNDRECT\"),\n  corner_radius: z.number(),\n  corner_1_x: z.number(),\n  corner_1_y: z.number(),\n  corner_2_x: z.number(),\n  corner_2_y: z.number(),\n  corner_3_x: z.number(),\n  corner_3_y: z.number(),\n  corner_4_x: z.number(),\n  corner_4_y: z.number(),\n})\n\nconst macro_aperture_template_config = z.discriminatedUnion(\"macro_name\", [\n  horz_pill_template,\n  vert_pill_template,\n  roundrect_template,\n])\n\nconst aperture_template_config = z.union([\n  standard_aperture_template_config,\n  macro_aperture_template_config,\n])\n\nexport const define_aperture_template = defineGerberCommand({\n  command_code: \"ADD\",\n  schema: aperture_template_config.and(\n    z.object({\n      command_code: z.literal(\"ADD\").default(\"ADD\"),\n      aperture_number: z.number().int(),\n    }),\n  ),\n  stringify(props) {\n    if (\"macro_name\" in props) {\n      const { aperture_number, macro_name } = props\n      let commandString = `%ADD${aperture_number}${macro_name},`\n\n      if (macro_name === \"HORZPILL\" || macro_name === \"VERTPILL\") {\n        commandString += `${props.x_size.toFixed(6)}X${props.y_size.toFixed(6)}X${props.circle_diameter.toFixed(6)}X${props.circle_center_offset.toFixed(6)}`\n      } else if (macro_name === \"ROUNDRECT\") {\n        // Handle ROUNDRECT if needed\n        throw new Error(\"ROUNDRECT macro not implemented yet\")\n      }\n\n      commandString += \"*%\"\n      return commandString\n    }\n    if (\"standard_template_code\" in props) {\n      const { aperture_number, standard_template_code } = props\n      let commandString = `%ADD${aperture_number}${standard_template_code},`\n\n      if (standard_template_code === \"C\") {\n        commandString += `${props.diameter.toFixed(6)}`\n      } else if (\n        standard_template_code === \"R\" ||\n        standard_template_code === \"O\"\n      ) {\n        commandString += `${props.x_size.toFixed(6)}X${props.y_size.toFixed(6)}`\n      } else if (standard_template_code === \"P\") {\n        commandString += `${props.outer_diameter}X${props.number_of_vertices}X${\n          props.rotation ? `X${props.rotation}` : \"\"\n        }`\n      }\n\n      if (props.hole_diameter) {\n        commandString += `X${props.hole_diameter.toFixed(6)}`\n      }\n\n      commandString += \"*%\"\n\n      return commandString\n    }\n    throw new Error(\n      `Invalid aperture template config: ${JSON.stringify(props)}`,\n    )\n  },\n})\n\nexport type DefineAperatureTemplateCommand = z.infer<\n  typeof define_aperture_template.schema\n>\n\nexport type ApertureTemplateConfig = z.infer<typeof aperture_template_config>\n","import { z } from \"zod\"\nimport { defineGerberCommand } from \"../define-gerber-command\"\n\nexport const select_aperture = defineGerberCommand({\n  command_code: \"D\",\n  schema: z.object({\n    command_code: z.literal(\"D\").default(\"D\"),\n    aperture_number: z.number().int(),\n  }),\n  stringify({ aperture_number }) {\n    return `D${aperture_number}*`\n  },\n})\n","import type { GerberCommandDef } from \"./define-gerber-command\"\nimport type { z } from \"zod\"\n\nimport { add_attribute_on_aperture } from \"./commands/add_attribute_on_aperture\"\nimport { add_attribute_on_file } from \"./commands/add_attribute_on_file\"\nimport { add_attribute_on_object } from \"./commands/add_attribute_on_object\"\nimport { aperture_block } from \"./commands/aperture_block\"\nimport { comment } from \"./commands/comment\"\nimport { create_arc } from \"./commands/create_arc\"\nimport { define_aperture } from \"./commands/define_aperture\"\nimport { define_macro_aperture_template } from \"./commands/define_macro_aperture_template\"\nimport { delete_attribute } from \"./commands/delete_attribute\"\nimport { end_of_file } from \"./commands/end_of_file\"\nimport { end_region_statement } from \"./commands/end_region_statement\"\nimport { flash_operation } from \"./commands/flash_operation\"\nimport { load_mirroring } from \"./commands/load_mirroring\"\nimport { load_polarity } from \"./commands/load_polarity\"\nimport { load_rotation } from \"./commands/load_rotation\"\nimport { load_scaling } from \"./commands/load_scaling\"\nimport { move_operation } from \"./commands/move_operation\"\nimport { plot_operation } from \"./commands/plot_operation\"\nimport { set_coordinate_format } from \"./commands/set_coordinate_format\"\nimport { set_current_aperture_d_code } from \"./commands/set_current_aperture_d_code\"\nimport { set_movement_mode_to_clockwise_circular } from \"./commands/set_movement_mode_to_clockwise_circular\"\nimport { set_movement_mode_to_counterclockwise_circular } from \"./commands/set_movement_mode_to_counterclockwise_circular\"\nimport { set_movement_mode_to_linear } from \"./commands/set_movement_mode_to_linear\"\nimport { set_unit } from \"./commands/set_unit\"\nimport { start_region_statement } from \"./commands/start_region_statement\"\nimport { step_and_repeat } from \"./commands/step_and_repeat\"\nimport { format_specification } from \"./commands/format_specification\"\nimport { set_layer_polarity } from \"./commands/set_layer_polarity\"\nimport { define_aperture_template } from \"./commands/define_aperture_template\"\nimport { select_aperture } from \"./commands/select_aperture\"\n\nexport const gerber_command_map = {\n  add_attribute_on_aperture,\n  add_attribute_on_file,\n  add_attribute_on_object,\n  aperture_block,\n  comment,\n  create_arc,\n  define_aperture,\n  define_macro_aperture_template,\n  delete_attribute,\n  end_of_file,\n  move_operation,\n  flash_operation,\n  // end_region_statement,\n  // flash_operation,\n  format_specification,\n  // load_mirroring,\n  // load_polarity,\n  load_rotation,\n  // load_scaling,\n  plot_operation,\n  // set_coordinate_format,\n  // set_current_aperture_d_code,\n  define_aperture_template,\n  set_movement_mode_to_clockwise_circular,\n  set_movement_mode_to_counterclockwise_circular,\n  set_movement_mode_to_linear,\n  select_aperture,\n  set_unit,\n  set_layer_polarity,\n  // start_region_statement,\n  // step_and_repeat,\n} as const satisfies Record<string, GerberCommandDef<any, any>>\n\nexport type AnyGerberCommand = z.infer<\n  (typeof gerber_command_map)[keyof typeof gerber_command_map][\"schema\"]\n>\n","import type { AnyGerberCommand } from \"./any_gerber_command\"\nimport type { z } from \"zod\"\nimport { gerber_command_map } from \"./any_gerber_command\"\n\nexport const gerberBuilder = () => new GerberBuilder()\n\nclass GerberBuilder {\n  commands: Array<AnyGerberCommand>\n\n  constructor() {\n    this.commands = []\n  }\n\n  $if(\n    condition: boolean,\n    fn: (gb: GerberBuilder) => GerberBuilder,\n  ): GerberBuilder {\n    if (condition) {\n      return fn(this)\n    }\n    return this\n  }\n\n  add<T extends keyof typeof gerber_command_map>(\n    cmd: T,\n    props: z.input<(typeof gerber_command_map)[T][\"schema\"]>,\n  ): GerberBuilder {\n    this.commands.push({\n      ...({ command_code: gerber_command_map[cmd].command_code } as any),\n      ...props,\n    })\n    return this\n  }\n\n  build(): Array<AnyGerberCommand> {\n    return this.commands\n  }\n}\n\n// Type test:\n// gerber()\n//   .add(\"add_attribute_on_aperture\", {\n//     attribute_name: \"foo\",\n//     attribute_value: \"bar\",\n//   })\n//   .add(\"end_of_file\", {})\n//   .build()\n","import type { AnyGerberCommand } from \"../any_gerber_command\"\nimport { gerber_command_map } from \"../any_gerber_command\"\n\nexport const stringifyGerberCommand = (command: AnyGerberCommand): string => {\n  const command_def = Object.values(gerber_command_map).find(\n    (cmd) => cmd.command_code === command.command_code,\n  )\n\n  if (!command_def) {\n    throw new Error(\n      `Command for command_code:\"${command.command_code}\" not found`,\n    )\n  }\n\n  if (!command_def.stringify) {\n    throw new Error(\n      `Command for command_code:\"${command.command_code}\" does not have a stringify method`,\n    )\n  }\n\n  return command_def.stringify(command as any)\n}\n","import type { AnyGerberCommand } from \"../any_gerber_command\"\nimport type { GerberLayerName } from \"../convert-soup-to-gerber-commands/GerberLayerName\"\nimport { stringifyGerberCommand } from \"./stringify-gerber-command\"\n\nexport const stringifyGerberCommandLayers = (\n  commandLayers: Record<GerberLayerName, AnyGerberCommand[]>,\n): Record<GerberLayerName, string> => {\n  const stringifiedCommandLayers: Record<GerberLayerName, string> = {} as any\n  for (const layerName of Object.keys(commandLayers) as GerberLayerName[]) {\n    stringifiedCommandLayers[layerName] = commandLayers[layerName]\n      .map((command) => {\n        return stringifyGerberCommand(command)\n      })\n      .join(\"\\n\")\n  }\n  return stringifiedCommandLayers\n}\n","import type { AnyGerberCommand } from \"../any_gerber_command\"\nimport { stringifyGerberCommand } from \"./stringify-gerber-command\"\n\nexport const stringifyGerberCommands = (\n  commands: AnyGerberCommand[],\n): string => {\n  return commands\n    .map((command) => {\n      return stringifyGerberCommand(command)\n    })\n    .join(\"\\n\")\n}\n","/**\n * Return pairs of adjacent elements in an array.\n */\nexport function pairs<T>(arr: Array<T>): Array<[T, T]> {\n  const result: Array<[T, T]> = []\n  for (let i = 0; i < arr.length - 1; i++) {\n    result.push([arr[i], arr[i + 1]])\n  }\n  return result\n}\n","import type { AnyGerberCommand } from \"../any_gerber_command\"\nimport { gerberBuilder } from \"../gerber-builder\"\n\nexport const defineCommonMacros = (glayer: Array<AnyGerberCommand>) => {\n  glayer.push(\n    ...gerberBuilder()\n      .add(\"comment\", { comment: \"APERTURE MACROS START\" })\n      .add(\"define_macro_aperture_template\", {\n        macro_name: \"HORZPILL\",\n        template_code: `\n0 Horizontal pill (stadium) shape macro*\n0 Parameters:*\n0 $1 = Total width*\n0 $2 = Total height*\n0 $3 = Circle diameter (equal to height)*\n0 $4 = Circle center offset\n0 21 = Center Line(Exposure, Width, Height, Center X, Center Y, Rotation)*\n0 1 = Circle(Exposure, Diameter, Center X, Center Y, Rotation)*\n21,1,$1,$2,0.0,0.0,0.0*\n1,1,$3,0.0-$4,0.0*\n1,1,$3,$4,0.0*\n`.trim(),\n      })\n      .add(\"define_macro_aperture_template\", {\n        macro_name: \"VERTPILL\",\n        template_code: `\n0 Vertical pill (stadium) shape macro*\n0 Parameters:*\n0 $1 = Total width*\n0 $2 = Total height*\n0 $3 = Circle diameter (equal to width)*\n0 $4 = Circle center offset\n0 21 = Center Line(Exposure, Width, Height, Center X, Center Y, Rotation)*\n21,1,$1,$2,0.0,0.0,0.0*\n1,1,$3,0.0,0.0-$4*\n1,1,$3,0.0,$4*\n`.trim(),\n      })\n      .add(\"define_macro_aperture_template\", {\n        macro_name: \"RoundRect\",\n        template_code: `\n0 Rectangle with rounded corners*\n0 $1 Corner radius*\n0 $2 $3 $4 $5 $6 $7 $8 $9 X,Y Position of each corner*\n0 Polygon box body*\n4,1,4,$2,$3,$4,$5,$6,$7,$8,$9,$2,$3,0*\n0 Circles for rounded corners*\n1,1,$1+$1,$2,$3*\n1,1,$1+$1,$4,$5*\n1,1,$1+$1,$6,$7*\n1,1,$1+$1,$8,$9*\n0 Rectangles between the rounded corners*\n20,1,$1+$1,$2,$3,$4,$5,0*\n20,1,$1+$1,$4,$5,$6,$7,0*\n20,1,$1+$1,$6,$7,$8,$9,0*\n20,1,$1+$1,$8,$9,$2,$3,0*\n`.trim(),\n      })\n      .add(\"comment\", { comment: \"APERTURE MACROS END\" })\n      .build(),\n  )\n}\n","import type {\n  PCBHole,\n  LayerRef,\n  PCBPlatedHole,\n  PCBSMTPad,\n  PcbVia,\n  PcbHole,\n  PcbSolderPaste,\n  PcbSilkscreenPath,\n  PcbSilkscreenText,\n} from \"circuit-json\"\nimport stableStringify from \"fast-json-stable-stringify\"\nimport type { AnyGerberCommand } from \"../any_gerber_command\"\nimport type { ApertureTemplateConfig } from \"../commands/define_aperture_template\"\nimport { gerberBuilder } from \"../gerber-builder\"\nimport type { GerberLayerName } from \"./GerberLayerName\"\nimport { getAllTraceWidths } from \"./getAllTraceWidths\"\nimport type { AnyCircuitElement } from \"circuit-json\"\n\nexport function defineAperturesForLayer({\n  glayer,\n  soup,\n  glayer_name,\n}: {\n  glayer: AnyGerberCommand[]\n  soup: AnyCircuitElement[]\n  glayer_name: GerberLayerName\n}) {\n  const getNextApertureNumber = () => {\n    const highest_aperture_number = glayer.reduce((acc, command) => {\n      if (command.command_code === \"ADD\") {\n        return Math.max(acc, command.aperture_number)\n      }\n      return acc\n    }, 0)\n    if (highest_aperture_number === 0) {\n      return 10\n    }\n    return highest_aperture_number + 1\n  }\n\n  glayer.push(\n    ...gerberBuilder()\n      .add(\"comment\", { comment: \"aperture START LIST\" })\n      .build(),\n  )\n\n  // Add all trace width apertures\n  const traceWidths: Record<LayerRef, number[]> = getAllTraceWidths(soup)\n  for (const width of traceWidths[\n    glayer_name.startsWith(\"F_\") ? \"top\" : \"bottom\"\n  ]) {\n    glayer.push(\n      ...gerberBuilder()\n        .add(\"define_aperture_template\", {\n          aperture_number: getNextApertureNumber(),\n          standard_template_code: \"C\",\n          diameter: width,\n        })\n        .build(),\n    )\n  }\n\n  // Add all pcb smtpad, plated hole etc. aperatures\n  const apertureConfigs = getAllApertureTemplateConfigsForLayer(\n    soup,\n    glayer_name.startsWith(\"F_\") ? \"top\" : \"bottom\",\n  )\n\n  for (const apertureConfig of apertureConfigs) {\n    glayer.push(\n      ...gerberBuilder()\n        .add(\"define_aperture_template\", {\n          aperture_number: getNextApertureNumber(),\n          ...apertureConfig,\n        })\n        .build(),\n    )\n  }\n\n  glayer.push(\n    ...gerberBuilder()\n      .add(\"delete_attribute\", {})\n      .add(\"comment\", { comment: \"aperture END LIST\" })\n      .build(),\n  )\n}\n\nexport const getApertureConfigFromPcbSmtpad = (\n  elm: PCBSMTPad,\n): ApertureTemplateConfig => {\n  if (elm.shape === \"rect\") {\n    return {\n      standard_template_code: \"R\",\n      x_size: elm.width,\n      y_size: elm.height,\n    }\n  }\n  if (elm.shape === \"circle\") {\n    return {\n      standard_template_code: \"C\",\n      diameter: elm.radius * 2,\n    }\n  }\n  if (elm.shape === \"rotated_rect\") {\n    // Rotation is handled by the LR command, not the aperture definition\n    return {\n      standard_template_code: \"R\",\n      x_size: elm.width,\n      y_size: elm.height,\n    }\n  }\n  throw new Error(`Unsupported shape ${(elm as any).shape}`)\n}\n\nexport const getApertureConfigFromPcbSilkscreenPath = (\n  elm: PcbSilkscreenPath,\n): ApertureTemplateConfig => {\n  if (\"stroke_width\" in elm) {\n    return {\n      standard_template_code: \"C\",\n      diameter: elm.stroke_width,\n    }\n  }\n  throw new Error(`Provide stroke_width for: ${elm as any}`)\n}\n\nexport const getApertureConfigFromPcbSilkscreenText = (\n  elm: PcbSilkscreenText,\n): ApertureTemplateConfig => {\n  if (\"font_size\" in elm) {\n    return {\n      standard_template_code: \"C\",\n      diameter: elm.font_size / 8, // font size and diamater have different units of measurement\n    }\n  }\n  throw new Error(`Provide font_size for: ${elm as any}`)\n}\n\nexport const getApertureConfigFromPcbSolderPaste = (\n  elm: PcbSolderPaste,\n): ApertureTemplateConfig => {\n  if (elm.shape === \"rect\") {\n    return {\n      standard_template_code: \"R\",\n      x_size: elm.width,\n      y_size: elm.height,\n    }\n  }\n  if (elm.shape === \"rotated_rect\") {\n    // Rotation is handled by the LR command, not the aperture definition\n    return {\n      standard_template_code: \"R\",\n      x_size: elm.width,\n      y_size: elm.height,\n    }\n  }\n  if (elm.shape === \"circle\") {\n    return {\n      standard_template_code: \"C\",\n      diameter: elm.radius * 2,\n    }\n  }\n  if (elm.shape === \"pill\") {\n    if (!(\"width\" in elm && \"height\" in elm)) {\n      throw new Error(\n        \"Invalid pill shape in getApertureConfigFromPcbPlatedHole: missing dimensions\",\n      )\n    }\n    if (elm.width >= elm.height) {\n      return {\n        macro_name: \"HORZPILL\",\n        x_size: elm.width,\n        y_size: elm.height,\n        circle_diameter: Math.min(elm.width, elm.height),\n        circle_center_offset: elm.width / 2,\n      }\n    }\n    return {\n      macro_name: \"VERTPILL\",\n      x_size: elm.width,\n      y_size: elm.height,\n      circle_diameter: Math.min(elm.width, elm.height),\n      circle_center_offset: elm.height / 2,\n    }\n  }\n  throw new Error(`Unsupported shape ${(elm as any).shape}`)\n}\n\nexport const getApertureConfigFromPcbPlatedHole = (\n  elm: PCBPlatedHole,\n): ApertureTemplateConfig => {\n  if (elm.shape === \"circle\") {\n    if (!(\"outer_diameter\" in elm && \"hole_diameter\" in elm)) {\n      throw new Error(\n        \"Invalid circle shape in getApertureConfigFromPcbPlatedHole: missing diameters\",\n      )\n    }\n    return {\n      standard_template_code: \"C\",\n      diameter: elm.outer_diameter,\n    }\n  }\n  if (elm.shape === \"pill\") {\n    if (!(\"outer_width\" in elm && \"outer_height\" in elm)) {\n      throw new Error(\n        \"Invalid pill shape in getApertureConfigFromPcbPlatedHole: missing dimensions\",\n      )\n    }\n\n    if (elm.outer_width > elm.outer_height) {\n      return {\n        macro_name: \"HORZPILL\",\n        x_size: elm.outer_width,\n        y_size: elm.outer_height,\n        circle_diameter: Math.min(elm.outer_width, elm.outer_height),\n        circle_center_offset: elm.outer_width / 2,\n      }\n    }\n    return {\n      macro_name: \"VERTPILL\",\n      x_size: elm.outer_width,\n      y_size: elm.outer_height,\n      circle_diameter: Math.min(elm.outer_width, elm.outer_height),\n      circle_center_offset: elm.outer_height / 2,\n    }\n  }\n  if (elm.shape === \"circular_hole_with_rect_pad\") {\n    if (!(\"rect_pad_width\" in elm && \"rect_pad_height\" in elm)) {\n      throw new Error(\n        \"Invalid circular_hole_with_rect_pad shape in getApertureConfigFromPcbPlatedHole: missing dimensions\",\n      )\n    }\n    return {\n      standard_template_code: \"R\",\n      x_size: elm.rect_pad_width,\n      y_size: elm.rect_pad_height,\n    }\n  }\n  throw new Error(\n    `Unsupported shape in getApertureConfigFromPcbPlatedHole: ${elm.shape}`,\n  )\n}\n\nexport const getApertureConfigFromCirclePcbHole = (\n  elm: PcbHole,\n): ApertureTemplateConfig => {\n  if (!(\"hole_diameter\" in elm)) {\n    throw new Error(\n      `Invalid shape called in getApertureConfigFromCirclePcbHole: ${elm.hole_shape}`,\n    )\n  }\n  return {\n    standard_template_code: \"C\",\n    diameter: elm.hole_diameter,\n  }\n}\n\nexport const getApertureConfigFromPcbVia = (\n  elm: PcbVia,\n): ApertureTemplateConfig => {\n  if (!(\"outer_diameter\" in elm)) {\n    throw new Error(\n      \"outer_diameter not specified in getApertureConfigFromPcbVia\",\n    )\n  }\n  return {\n    standard_template_code: \"C\",\n    diameter: elm.outer_diameter,\n  }\n}\n\nfunction getAllApertureTemplateConfigsForLayer(\n  soup: AnyCircuitElement[],\n  layer: \"top\" | \"bottom\",\n): ApertureTemplateConfig[] {\n  const configs: ApertureTemplateConfig[] = []\n  const configHashMap = new Set<string>()\n\n  const addConfigIfNew = (config: ApertureTemplateConfig) => {\n    const hash = stableStringify(config)\n    if (!configHashMap.has(hash)) {\n      configs.push(config)\n      configHashMap.add(hash)\n    }\n  }\n\n  for (const elm of soup) {\n    if (elm.type === \"pcb_smtpad\") {\n      if (elm.layer === layer) {\n        addConfigIfNew(getApertureConfigFromPcbSmtpad(elm))\n      }\n    } else if (elm.type === \"pcb_solder_paste\") {\n      if (elm.layer === layer) {\n        addConfigIfNew(getApertureConfigFromPcbSolderPaste(elm))\n      }\n    } else if (elm.type === \"pcb_plated_hole\") {\n      if (elm.layers.includes(layer)) {\n        addConfigIfNew(getApertureConfigFromPcbPlatedHole(elm))\n      }\n    } else if (elm.type === \"pcb_hole\") {\n      if (elm.hole_shape === \"circle\")\n        addConfigIfNew(getApertureConfigFromCirclePcbHole(elm))\n      else console.warn(\"NOT IMPLEMENTED: drawing gerber for non circle holes\")\n    } else if (elm.type === \"pcb_via\") {\n      addConfigIfNew(getApertureConfigFromPcbVia(elm))\n    } else if (elm.type === \"pcb_silkscreen_path\")\n      addConfigIfNew(getApertureConfigFromPcbSilkscreenPath(elm))\n    else if (elm.type === \"pcb_silkscreen_text\")\n      addConfigIfNew(getApertureConfigFromPcbSilkscreenText(elm))\n  }\n\n  return configs\n}\n","import type { AnyCircuitElement, LayerRef, PCBTrace } from \"circuit-json\"\n\nexport function getAllTraceWidths(\n  soup: AnyCircuitElement[],\n): Record<LayerRef, number[]> {\n  const pcb_traces = soup.filter(\n    (elm): elm is PCBTrace => elm.type === \"pcb_trace\",\n  )\n\n  const widths: Record<LayerRef, Set<number>> = {} as any\n\n  for (const trace of pcb_traces) {\n    for (const segment of trace.route) {\n      if (segment.route_type === \"wire\") {\n        widths[segment.layer] = widths[segment.layer] || new Set<number>()\n        widths[segment.layer].add(segment.width)\n      }\n    }\n  }\n\n  return {\n    top: Array.from(widths.top || []),\n    bottom: Array.from(widths.bottom || []),\n  } as any\n}\n","import type {\n  ApertureTemplateConfig,\n  DefineAperatureTemplateCommand,\n} from \"../commands/define_aperture_template\"\nimport type { AnyGerberCommand } from \"../any_gerber_command\"\n\nexport const findApertureNumber = (\n  glayer: AnyGerberCommand[],\n  search_params:\n    | {\n        trace_width?: number\n      }\n    | ApertureTemplateConfig,\n): number => {\n  let aperture: any\n  if (\"trace_width\" in search_params) {\n    const trace_width = search_params.trace_width\n    aperture = glayer.find(\n      (command): command is DefineAperatureTemplateCommand =>\n        \"standard_template_code\" in command &&\n        command.command_code === \"ADD\" &&\n        command.standard_template_code === \"C\" &&\n        command.diameter === trace_width,\n    )\n  } else if (\n    \"standard_template_code\" in search_params ||\n    \"macro_name\" in search_params\n  ) {\n    aperture = glayer.find(\n      (command): command is DefineAperatureTemplateCommand =>\n        command.command_code === \"ADD\" &&\n        Object.keys(search_params).every(\n          (param_name) =>\n            command[param_name as keyof typeof search_params] ===\n            search_params[param_name as keyof typeof search_params],\n        ),\n    )\n  }\n\n  if (!aperture) {\n    // TODO add FileFunction/layer name to this error to help narrow it\n    throw new Error(\n      `Aperture not found for search params ${JSON.stringify(search_params)}`,\n    )\n  }\n  return aperture.aperture_number\n}\n","{\n  \"name\": \"circuit-json-to-gerber\",\n  \"version\": \"0.0.29\",\n  \"main\": \"dist/index.js\",\n  \"type\": \"module\",\n  \"scripts\": {\n    \"build\": \"tsup-node src/index.ts src/cli.ts --format esm --dts --sourcemap\",\n    \"format\": \"biome format --write .\",\n    \"format:check\": \"biome format .\"\n  },\n  \"files\": [\n    \"dist\"\n  ],\n  \"bin\": {\n    \"circuit-to-gerber\": \"./dist/cli.js\"\n  },\n  \"devDependencies\": {\n    \"@biomejs/biome\": \"^1.8.3\",\n    \"@tscircuit/core\": \"^0.0.580\",\n    \"@types/archiver\": \"^6.0.3\",\n    \"@types/bun\": \"^1.1.8\",\n    \"@types/node\": \"^22.5.2\",\n    \"@types/react\": \"^18.3.12\",\n    \"archiver\": \"^7.0.1\",\n    \"bun-match-svg\": \"^0.0.3\",\n    \"commander\": \"^12.1.0\",\n    \"gerber-to-svg\": \"^4.2.8\",\n    \"pcb-stackup\": \"^4.2.8\",\n    \"react\": \"^18.3.1\",\n    \"tsup\": \"^8.2.4\",\n    \"circuit-json\": \"^0.0.220\"\n  },\n  \"peerDependencies\": {\n    \"typescript\": \"^5.0.0\",\n    \"circuit-json\": \"*\"\n  },\n  \"dependencies\": {\n    \"@tscircuit/alphabet\": \"^0.0.2\",\n    \"fast-json-stable-stringify\": \"^2.1.0\",\n    \"transformation-matrix\": \"^3.0.0\"\n  }\n}\n","import type { AnyGerberCommand } from \"src/gerber/any_gerber_command\"\nimport { gerberBuilder } from \"../gerber-builder\"\nimport packageJson from \"../../../package.json\"\n\nconst layerAndTypeToFileFunction = {\n  \"top-copper\": \"Copper,L1,Top\",\n  \"bottom-copper\": \"Copper,L2,Bot\",\n  \"top-soldermask\": \"Soldermask,Top\",\n  \"bottom-soldermask\": \"Soldermask,Bot\",\n  \"top-silkscreen\": \"Legend,Top\",\n  \"bottom-silkscreen\": \"Legend,Bot\",\n  \"top-paste\": \"Paste,Top\",\n  \"bottom-paste\": \"Paste,Bot\",\n  edgecut: \"Profile,NP\",\n  // TODO inner layers\n}\n\n/**\n * Returns headers for a Gerber file. Here's a typical header:\n *\n * %TF.GenerationSoftware,KiCad,Pcbnew,8.0.1*%\n * %TF.CreationDate,2024-04-08T11:14:22-07:00*%\n * %TF.ProjectId,,58585858-5858-4585-9858-585858585858,rev?*%\n * %TF.SameCoordinates,Original*%\n * %TF.FileFunction,Copper,L1,Top*%\n * %TF.FilePolarity,Positive*%\n * %FSLAX46Y46*%\n * G04 Gerber Fmt 4.6, Leading zero omitted, Abs format (unit mm)*\n * G04 Created by KiCad (PCBNEW 8.0.1) date 2024-04-08 11:14:22*\n * %MOMM*%\n * %LPD*%\n */\nexport const getCommandHeaders = (opts: {\n  layer:\n    | \"edgecut\"\n    | \"top\"\n    | \"bottom\"\n    | \"inner1\"\n    | \"inner2\"\n    | \"inner3\"\n    | \"inner4\"\n  layer_type?: \"copper\" | \"soldermask\" | \"silkscreen\" | \"paste\"\n}): AnyGerberCommand[] => {\n  const file_function =\n    layerAndTypeToFileFunction[\n      (opts.layer_type\n        ? `${opts.layer}-${opts.layer_type}`\n        : opts.layer) as keyof typeof layerAndTypeToFileFunction\n    ]\n  return (\n    gerberBuilder()\n      .add(\"add_attribute_on_file\", {\n        attribute_name: \"GenerationSoftware\",\n        attribute_value: `tscircuit,circuit-json-to-gerber,${packageJson.version}`,\n      })\n      .add(\"add_attribute_on_file\", {\n        attribute_name: \"CreationDate\",\n        attribute_value: new Date().toISOString(),\n      })\n      // .add(\"add_attribute_on_file\", {\n      //   attribute_name: \"ProjectId\",\n      //   attribute_value: \"\",\n      // })\n      .add(\"add_attribute_on_file\", {\n        attribute_name: \"SameCoordinates\",\n        attribute_value: \"Original\",\n      })\n      .add(\"add_attribute_on_file\", {\n        attribute_name: \"FileFunction\",\n        attribute_value: file_function,\n      })\n      .$if(opts.layer !== \"edgecut\", (gb) =>\n        gb.add(\"add_attribute_on_file\", {\n          attribute_name: \"FilePolarity\",\n          attribute_value:\n            opts.layer_type === \"soldermask\" ? \"Negative\" : \"Positive\",\n        }),\n      )\n      .add(\"format_specification\", {})\n      .add(\"set_unit\", {\n        unit: \"MM\",\n      })\n      .add(\"comment\", {\n        comment: \"Gerber Fmt 4.6, Leading zero omitted, Abs format (unit mm)\",\n      })\n      .add(\"comment\", {\n        comment: `Created by tscircuit (builder) date ${new Date().toISOString()}`,\n      })\n      .add(\"set_movement_mode_to_linear\", {})\n      .build()\n  )\n}\n","import type { LayerRef } from \"circuit-json\"\nimport type { GerberLayerName } from \"./GerberLayerName\"\n\nconst layerRefToGerberPrefix = {\n  top: \"F_\",\n  bottom: \"B_\",\n} as const\nconst layerTypeToGerberSuffix = {\n  copper: \"Cu\",\n  silkscreen: \"SilkScreen\",\n  soldermask: \"Mask\",\n  mask: \"Mask\",\n  paste: \"Paste\",\n} as const\n\nexport const getGerberLayerName = (\n  layer_ref: LayerRef | \"edgecut\",\n  layer_type: \"copper\" | \"silkscreen\" | \"soldermask\" | \"paste\",\n): GerberLayerName => {\n  if (layer_ref === \"edgecut\") return \"Edge_Cuts\"\n  return `${layerRefToGerberPrefix[layer_ref as keyof typeof layerRefToGerberPrefix]}${layerTypeToGerberSuffix[layer_type]}`\n}\n","import type { AnyCircuitElement } from \"circuit-json\"\nimport { pairs } from \"../utils/pairs\"\nimport { gerberBuilder } from \"../gerber-builder\"\nimport type { LayerToGerberCommandsMap } from \"./GerberLayerName\"\nimport { defineCommonMacros } from \"./define-common-macros\"\nimport {\n  defineAperturesForLayer,\n  getApertureConfigFromCirclePcbHole,\n  getApertureConfigFromPcbPlatedHole,\n  getApertureConfigFromPcbSilkscreenPath,\n  getApertureConfigFromPcbSilkscreenText,\n  getApertureConfigFromPcbSmtpad,\n  getApertureConfigFromPcbSolderPaste,\n  getApertureConfigFromPcbVia,\n} from \"./defineAperturesForLayer\"\nimport type { PcbCutout } from \"circuit-json\"\nimport { findApertureNumber } from \"./findApertureNumber\"\nimport { getCommandHeaders } from \"./getCommandHeaders\"\nimport { getGerberLayerName } from \"./getGerberLayerName\"\nimport { lineAlphabet } from \"@tscircuit/alphabet\"\nimport {\n  applyToPoint,\n  compose,\n  identity,\n  rotate,\n  translate,\n  type Matrix,\n} from \"transformation-matrix\"\n\n/**\n * Converts tscircuit soup to arrays of Gerber commands for each layer\n */\nexport const convertSoupToGerberCommands = (\n  soup: AnyCircuitElement[],\n  opts: { flip_y_axis?: boolean } = {},\n): LayerToGerberCommandsMap => {\n  opts.flip_y_axis ??= false\n  const glayers: LayerToGerberCommandsMap = {\n    F_Cu: getCommandHeaders({\n      layer: \"top\",\n      layer_type: \"copper\",\n    }),\n    F_SilkScreen: getCommandHeaders({\n      layer: \"top\",\n      layer_type: \"silkscreen\",\n    }),\n    F_Mask: getCommandHeaders({\n      layer: \"top\",\n      layer_type: \"soldermask\",\n    }),\n    F_Paste: getCommandHeaders({\n      layer: \"top\",\n      layer_type: \"paste\",\n    }),\n    B_Cu: getCommandHeaders({\n      layer: \"bottom\",\n      layer_type: \"copper\",\n    }),\n    B_SilkScreen: getCommandHeaders({\n      layer: \"bottom\",\n      layer_type: \"silkscreen\",\n    }),\n    B_Mask: getCommandHeaders({\n      layer: \"bottom\",\n      layer_type: \"soldermask\",\n    }),\n    B_Paste: getCommandHeaders({\n      layer: \"bottom\",\n      layer_type: \"paste\",\n    }),\n    Edge_Cuts: getCommandHeaders({\n      layer: \"edgecut\",\n    }),\n  }\n\n  for (const glayer_name of [\n    \"F_Cu\",\n    \"B_Cu\",\n    \"F_Mask\",\n    \"B_Mask\",\n    \"F_Paste\",\n    \"B_Paste\",\n    \"F_SilkScreen\",\n    \"B_SilkScreen\",\n  ] as const) {\n    const glayer = glayers[glayer_name]\n    defineCommonMacros(glayer)\n    defineAperturesForLayer({\n      soup,\n      glayer,\n      glayer_name,\n    })\n  }\n\n  // Edgecuts has a single aperature\n  glayers.Edge_Cuts.push(\n    ...gerberBuilder()\n      .add(\"define_aperture_template\", {\n        aperture_number: 10,\n        standard_template_code: \"C\",\n        diameter: 0.05, //mm\n      })\n      .build(),\n  )\n\n  /**\n   * \"maybe flip y axis\" to handle y axis negating\n   */\n  const mfy = (y: number) => (opts.flip_y_axis ? -y : y)\n\n  for (const layer of [\"top\", \"bottom\", \"edgecut\"] as const) {\n    for (const element of soup) {\n      if (element.type === \"pcb_trace\") {\n        const { route } = element\n        for (const [a, b] of pairs(route)) {\n          // TODO b kind of matters here, this doesn't handle a bunch of cases\n          // but the definition of a route is also kind of broken, a \"wire\" is\n          // a relationship between two points and can't really be a type of\n          // point\n          if (a.route_type === \"wire\") {\n            if (a.layer === layer) {\n              const glayer = glayers[getGerberLayerName(layer, \"copper\")]\n              glayer.push(\n                ...gerberBuilder()\n                  .add(\"select_aperture\", {\n                    aperture_number: findApertureNumber(glayer, {\n                      trace_width: a.width,\n                    }),\n                  })\n                  .add(\"move_operation\", { x: a.x, y: mfy(a.y) })\n                  .add(\"plot_operation\", { x: b.x, y: mfy(b.y) })\n                  .build(),\n              )\n            }\n          }\n        }\n      } else if (element.type === \"pcb_silkscreen_path\") {\n        if (element.layer === layer) {\n          const glayer = glayers[getGerberLayerName(layer, \"silkscreen\")]\n          const apertureConfig = getApertureConfigFromPcbSilkscreenPath(element)\n          const gerber = gerberBuilder().add(\"select_aperture\", {\n            aperture_number: findApertureNumber(glayer, apertureConfig),\n          })\n          // Move to the first point\n          if (element.route.length > 0) {\n            gerber.add(\"move_operation\", {\n              x: element.route[0].x,\n              y: mfy(element.route[0].y),\n            })\n          }\n\n          // Plot lines to subsequent points\n          for (let i = 1; i < element.route.length; i++) {\n            gerber.add(\"plot_operation\", {\n              x: element.route[i].x,\n              y: mfy(element.route[i].y),\n            })\n          }\n\n          glayer.push(...gerber.build())\n        }\n      } else if (element.type === \"pcb_silkscreen_text\") {\n        if (element.layer === layer) {\n          // The acctual Uppercase letters are 70% of the font size\n          // sources: https://forum.generic-mapping-tools.org/t/what-exactly-is-the-custom-font-s-height-point-size-ratio/1265/2?utm_source=chatgpt.com\n          const CAP_HEIGHT_SCALE = 0.7 // Adjust based on your font's metrics\n          const glayer = glayers[getGerberLayerName(layer, \"silkscreen\")]\n          const apertureConfig = getApertureConfigFromPcbSilkscreenText(element)\n          const gerber = gerberBuilder().add(\"select_aperture\", {\n            aperture_number: findApertureNumber(glayer, apertureConfig),\n          })\n\n          let initialX = element.anchor_position.x\n          let initialY = element.anchor_position.y\n          const fontSize = element.font_size * CAP_HEIGHT_SCALE\n          const letterSpacing = fontSize * 0.4\n          const spaceWidth = fontSize * 0.5\n\n          const textWidth =\n            element.text.split(\"\").reduce((width, char) => {\n              if (char === \" \") {\n                return width + spaceWidth + letterSpacing\n              }\n              return width + fontSize + letterSpacing\n            }, 0) - letterSpacing\n\n          const textHeight = fontSize\n\n          const anchorAlignment =\n            element.anchor_alignment ||\n            (():\n              | \"top_center\"\n              | \"bottom_center\"\n              | \"center_left\"\n              | \"center_right\"\n              | undefined => {\n              const side = (element as any).anchor_side as\n                | \"top\"\n                | \"bottom\"\n                | \"left\"\n                | \"right\"\n                | undefined\n              if (!side) return undefined\n              switch (side) {\n                case \"top\":\n                  return \"top_center\"\n                case \"bottom\":\n                  return \"bottom_center\"\n                case \"left\":\n                  return \"center_left\"\n                case \"right\":\n                  return \"center_right\"\n              }\n            })() ||\n            \"center\"\n\n          switch (anchorAlignment) {\n            case \"top_left\":\n              break\n            case \"top_center\":\n              initialX -= textWidth / 2\n              break\n            case \"top_right\":\n              initialX -= textWidth\n              break\n            case \"center_right\":\n              initialY -= textHeight / 2\n              break\n            case \"center_left\":\n              initialX -= textWidth\n              initialY -= textHeight / 2\n              break\n            case \"bottom_left\":\n              initialY -= textHeight\n              break\n            case \"bottom_center\":\n              initialX -= textWidth / 2\n              initialY -= textHeight\n              break\n            case \"bottom_right\":\n              initialX -= textWidth\n              initialY -= textHeight\n              break\n            default:\n              initialX -= textWidth / 2\n              initialY -= textHeight / 2\n              break\n          }\n\n          let anchoredX = initialX\n          const anchoredY = initialY\n\n          let rotation = element.ccw_rotation || 0\n          const cx = anchoredX + textWidth / 2\n          const cy = anchoredY + textHeight / 2\n          const transforms: Matrix[] = []\n\n          // Apply mirroring and rotation for the bottom layer only\n          if (element.layer === \"bottom\") {\n            transforms.push(\n              translate(cx, cy),\n              { a: -1, b: 0, c: 0, d: 1, e: 0, f: 0 }, // Horizontal flip\n              translate(-cx, -cy),\n            )\n            rotation = -rotation // Reverse rotation for bottom layer\n          }\n\n          // Apply rotation if present\n          if (rotation) {\n            const rad = (rotation * Math.PI) / 180\n            transforms.push(\n              translate(cx, cy), // Translate to center of rotation\n              rotate(rad), // Apply rotation\n              translate(-cx, -cy), // Translate back\n            )\n          }\n\n          // Process each character in the text\n          for (const char of element.text.toUpperCase()) {\n            if (char === \" \") {\n              anchoredX += spaceWidth + letterSpacing\n              continue\n            }\n\n            const letterPaths = lineAlphabet[char] || []\n            for (const path of letterPaths) {\n              const x1 = anchoredX + path.x1 * fontSize\n              const y1 = anchoredY + path.y1 * fontSize\n              const x2 = anchoredX + path.x2 * fontSize\n              const y2 = anchoredY + path.y2 * fontSize\n\n              // Apply transformations after positioning\n              let p1 = { x: x1, y: y1 }\n              let p2 = { x: x2, y: y2 }\n\n              if (transforms.length > 0) {\n                const transformMatrix = compose(...transforms)\n                p1 = applyToPoint(transformMatrix, p1)\n                p2 = applyToPoint(transformMatrix, p2)\n              }\n\n              gerber.add(\"move_operation\", { x: p1.x, y: mfy(p1.y) })\n              gerber.add(\"plot_operation\", { x: p2.x, y: mfy(p2.y) })\n            }\n\n            anchoredX += fontSize + letterSpacing // Move to next character position\n          }\n          glayer.push(...gerber.build())\n        }\n      } else if (element.type === \"pcb_smtpad\" && element.shape !== \"polygon\") {\n        if (element.layer === layer) {\n          for (const glayer of [\n            glayers[getGerberLayerName(layer, \"copper\")],\n            glayers[getGerberLayerName(layer, \"soldermask\")],\n          ]) {\n            const apertureConfig = getApertureConfigFromPcbSmtpad(element)\n            const apertureNumber = findApertureNumber(glayer, apertureConfig)\n            const gb = gerberBuilder().add(\"select_aperture\", {\n              aperture_number: apertureNumber,\n            })\n\n            if (element.shape === \"rotated_rect\" && element.ccw_rotation) {\n              gb.add(\"load_rotation\", {\n                rotation_degrees: element.ccw_rotation,\n              })\n            }\n\n            gb.add(\"flash_operation\", { x: element.x, y: mfy(element.y) })\n\n            if (element.shape === \"rotated_rect\" && element.ccw_rotation) {\n              // Reset rotation\n              gb.add(\"load_rotation\", { rotation_degrees: 0 })\n            }\n\n            glayer.push(...gb.build())\n          }\n        }\n      } else if (element.type === \"pcb_solder_paste\") {\n        if (element.layer === layer) {\n          for (const glayer of [glayers[getGerberLayerName(layer, \"paste\")]]) {\n            glayer.push(\n              ...gerberBuilder()\n                .add(\"select_aperture\", {\n                  aperture_number: findApertureNumber(\n                    glayer,\n                    getApertureConfigFromPcbSolderPaste(element),\n                  ),\n                })\n                .add(\"flash_operation\", { x: element.x, y: mfy(element.y) })\n                .build(),\n            )\n          }\n        }\n      } else if (element.type === \"pcb_plated_hole\") {\n        if (element.layers.includes(layer as any)) {\n          for (const glayer of [\n            glayers[getGerberLayerName(layer, \"copper\")],\n            glayers[getGerberLayerName(layer, \"soldermask\")],\n          ]) {\n            if (element.shape === \"pill\") {\n              // For pill shapes, use a circular aperture and draw the connecting line\n              const circleApertureConfig = {\n                standard_template_code: \"C\" as const,\n                diameter:\n                  element.outer_width > element.outer_height\n                    ? element.outer_height\n                    : element.outer_width,\n              }\n\n              // Find existing aperture number or get next available\n              let aperture_number = 10\n              try {\n                aperture_number = findApertureNumber(\n                  glayer,\n                  circleApertureConfig,\n                )\n              } catch {\n                aperture_number =\n                  Math.max(\n                    ...glayer\n                      .filter((cmd) => \"aperture_number\" in cmd)\n                      .map((cmd) => (cmd as any).aperture_number),\n                    9,\n                  ) + 1\n\n                // Add the aperture definition\n                glayer.push(\n                  ...gerberBuilder()\n                    .add(\"define_aperture_template\", {\n                      aperture_number,\n                      ...circleApertureConfig,\n                    })\n                    .build(),\n                )\n              }\n\n              const gb = gerberBuilder().add(\"select_aperture\", {\n                aperture_number,\n              })\n\n              if (element.outer_width > element.outer_height) {\n                // Horizontal pill\n                const offset = (element.outer_width - element.outer_height) / 2\n                gb.add(\"flash_operation\", {\n                  x: element.x - offset,\n                  y: mfy(element.y),\n                })\n                  .add(\"move_operation\", {\n                    x: element.x - offset,\n                    y: mfy(element.y),\n                  })\n                  .add(\"plot_operation\", {\n                    x: element.x + offset,\n                    y: mfy(element.y),\n                  })\n                  .add(\"flash_operation\", {\n                    x: element.x + offset,\n                    y: mfy(element.y),\n                  })\n              } else {\n                // Vertical pill\n                const offset = (element.outer_height - element.outer_width) / 2\n                gb.add(\"flash_operation\", {\n                  x: element.x,\n                  y: mfy(element.y - offset),\n                })\n                  .add(\"move_operation\", {\n                    x: element.x,\n                    y: mfy(element.y - offset),\n                  })\n                  .add(\"plot_operation\", {\n                    x: element.x,\n                    y: mfy(element.y + offset),\n                  })\n                  .add(\"flash_operation\", {\n                    x: element.x,\n                    y: mfy(element.y + offset),\n                  })\n              }\n\n              glayer.push(...gb.build())\n            } else {\n              const apertureConfig = getApertureConfigFromPcbPlatedHole(element)\n              glayer.push(\n                ...gerberBuilder()\n                  .add(\"select_aperture\", {\n                    aperture_number: findApertureNumber(glayer, apertureConfig),\n                  })\n                  .add(\"flash_operation\", { x: element.x, y: mfy(element.y) })\n                  .build(),\n              )\n            }\n          }\n        }\n      } else if (element.type === \"pcb_hole\") {\n        if (layer !== \"edgecut\") {\n          for (const glayer of [\n            glayers[getGerberLayerName(layer, \"soldermask\")],\n          ]) {\n            if (element.hole_shape !== \"circle\") {\n              console.warn(\n                \"NOT IMPLEMENTED: drawing gerber for non-round holes\",\n              )\n              continue\n            }\n            glayer.push(\n              ...gerberBuilder()\n                .add(\"select_aperture\", {\n                  aperture_number: findApertureNumber(\n                    glayer,\n                    getApertureConfigFromCirclePcbHole(element),\n                  ),\n                })\n                .add(\"flash_operation\", { x: element.x, y: mfy(element.y) })\n                .build(),\n            )\n          }\n        }\n      } else if (element.type === \"pcb_via\") {\n        if (element.layers.includes(layer as any)) {\n          for (const glayer of [glayers[getGerberLayerName(layer, \"copper\")]]) {\n            glayer.push(\n              ...gerberBuilder()\n                .add(\"select_aperture\", {\n                  aperture_number: findApertureNumber(\n                    glayer,\n                    getApertureConfigFromPcbVia(element),\n                  ),\n                })\n                .add(\"flash_operation\", { x: element.x, y: mfy(element.y) })\n                .build(),\n            )\n          }\n        }\n      } else if (element.type === \"pcb_board\" && layer === \"edgecut\") {\n        const glayer = glayers.Edge_Cuts\n        const { width, height, center, outline } = element\n        const gerberBuild = gerberBuilder().add(\"select_aperture\", {\n          aperture_number: 10,\n        })\n        if (outline && outline.length > 2) {\n          gerberBuild.add(\"move_operation\", outline[0])\n          for (let i = 1; i < outline.length; i++) {\n            gerberBuild.add(\"plot_operation\", outline[i])\n          }\n        } else {\n          gerberBuild\n            .add(\"move_operation\", {\n              x: center.x - width / 2,\n              y: mfy(center.y - height / 2),\n            })\n            .add(\"plot_operation\", {\n              x: center.x + width / 2,\n              y: mfy(center.y - height / 2),\n            })\n            // .add(\"move_operation\", {\n            //   x: center.x + width / 2,\n            //   y: center.y - height / 2,\n            // })\n            .add(\"plot_operation\", {\n              x: center.x + width / 2,\n              y: mfy(center.y + height / 2),\n            })\n            // .add(\"move_operation\", {\n            //   x: center.x + width / 2,\n            //   y: center.y + height / 2,\n            // })\n            .add(\"plot_operation\", {\n              x: center.x - width / 2,\n              y: mfy(center.y + height / 2),\n            })\n            // .add(\"move_operation\", {\n            //   x: center.x - width / 2,\n            //   y: center.y + height / 2,\n            // })\n            .add(\"plot_operation\", {\n              x: center.x - width / 2,\n              y: mfy(center.y - height / 2),\n            })\n        }\n\n        glayer.push(...gerberBuild.build())\n      } else if (element.type === \"pcb_cutout\") {\n        if (layer === \"edgecut\") {\n          const ec_layer = glayers.Edge_Cuts\n          const cutout_builder = gerberBuilder().add(\"select_aperture\", {\n            aperture_number: 10,\n          })\n\n          const el = element as PcbCutout\n\n          if (el.shape === \"rect\") {\n            const { center, width, height, rotation } = el\n            const w = width / 2\n            const h = height / 2\n\n            const points = [\n              { x: -w, y: h }, // Top-left\n              { x: w, y: h }, // Top-right\n              { x: w, y: -h }, // Bottom-right\n              { x: -w, y: -h }, // Bottom-left\n            ]\n\n            let transformMatrix = identity()\n            if (rotation) {\n              const angle_rad = (rotation * Math.PI) / 180\n              transformMatrix = rotate(angle_rad)\n            }\n            transformMatrix = compose(\n              translate(center.x, center.y),\n              transformMatrix,\n            )\n\n            const transformedPoints = points.map((p) =>\n              applyToPoint(transformMatrix, p),\n            )\n\n            cutout_builder.add(\"move_operation\", {\n              x: transformedPoints[0].x,\n              y: mfy(transformedPoints[0].y),\n            })\n            for (let i = 1; i < transformedPoints.length; i++) {\n              cutout_builder.add(\"plot_operation\", {\n                x: transformedPoints[i].x,\n                y: mfy(transformedPoints[i].y),\n              })\n            }\n            cutout_builder.add(\"plot_operation\", {\n              x: transformedPoints[0].x,\n              y: mfy(transformedPoints[0].y),\n            })\n          } else if (el.shape === \"circle\") {\n            const { center, radius } = el\n            const numSegments = 36\n            const angleStep = (2 * Math.PI) / numSegments\n            const points: Array<{ x: number; y: number }> = []\n\n            for (let i = 0; i < numSegments; i++) {\n              points.push({\n                x: center.x + radius * Math.cos(i * angleStep),\n                y: center.y + radius * Math.sin(i * angleStep),\n              })\n            }\n\n            cutout_builder.add(\"move_operation\", {\n              x: points[0].x,\n              y: mfy(points[0].y),\n            })\n            for (let i = 1; i < points.length; i++) {\n              cutout_builder.add(\"plot_operation\", {\n                x: points[i].x,\n                y: mfy(points[i].y),\n              })\n            }\n            cutout_builder.add(\"plot_operation\", {\n              x: points[0].x,\n              y: mfy(points[0].y),\n            })\n          } else if (el.shape === \"polygon\") {\n            const { points } = el\n            if (points.length > 0) {\n              cutout_builder.add(\"move_operation\", {\n                x: points[0].x,\n                y: mfy(points[0].y),\n              })\n              for (let i = 1; i < points.length; i++) {\n                cutout_builder.add(\"plot_operation\", {\n                  x: points[i].x,\n                  y: mfy(points[i].y),\n                })\n              }\n              cutout_builder.add(\"plot_operation\", {\n                x: points[0].x,\n                y: mfy(points[0].y),\n              })\n            }\n          }\n          ec_layer.push(...cutout_builder.build())\n        }\n      }\n    }\n  }\n\n  for (const key of Object.keys(glayers)) {\n    glayers[key as keyof LayerToGerberCommandsMap].push(\n      ...gerberBuilder().add(\"end_of_file\", {}).build(),\n    )\n  }\n\n  return glayers\n}\n"],"mappings":";AAAA,SAAS,SAAS;;;ACWX,IAAM,6BAA6B,CAGxC;AAAA,EACA;AAAA,EACA;AAAA,EACA;AACF,MAIqC;AACnC,SAAO;AAAA,IACL;AAAA,IACA;AAAA,IACA;AAAA,EACF;AACF;;;ADzBO,IAAM,OAAO,2BAA2B;AAAA,EAC7C,cAAc;AAAA,EACd,QAAQ,EAAE,OAAO;AAAA,IACf,cAAc,EAAE,QAAQ,MAAM,EAAE,QAAQ,MAAM;AAAA,IAC9C,QAAQ,EAAE,OAAO;AAAA,EACnB,CAAC;AAAA,EACD,WAAW,CAAC,MAAM,QAAQ,EAAE,MAAM;AACpC,CAAC;;;AEVD,SAAS,KAAAA,UAAS;AAMX,IAAM,MAAM,2BAA2B;AAAA,EAC5C,cAAc;AAAA,EACd,QAAQC,GAAE,OAAO;AAAA,IACf,cAAcA,GAAE,QAAQ,KAAK,EAAE,QAAQ,KAAK;AAAA,EAC9C,CAAC;AAAA,EACD,WAAW,MAAM;AACnB,CAAC;;;ACZD,SAAS,KAAAC,UAAS;AAMX,IAAM,MAAM,2BAA2B;AAAA,EAC5C,cAAc;AAAA,EACd,QAAQC,GAAE,OAAO;AAAA,IACf,cAAcA,GAAE,QAAQ,KAAK,EAAE,QAAQ,KAAK;AAAA,EAC9C,CAAC;AAAA,EACD,WAAW,MAAM;AACnB,CAAC;;;ACZD,SAAS,KAAAC,UAAS;AAGX,IAAM,MAAM,2BAA2B;AAAA,EAC5C,cAAc;AAAA,EACd,QAAQC,GAAE,OAAO;AAAA,IACf,cAAcA,GAAE,QAAQ,KAAK,EAAE,QAAQ,KAAK;AAAA,EAC9C,CAAC;AAAA,EACD,WAAW,MAAM;AACnB,CAAC;;;ACTD,SAAS,KAAAC,UAAS;AAGX,IAAM,MAAM,2BAA2B;AAAA,EAC5C,cAAc;AAAA,EACd,QAAQC,GAAE,OAAO;AAAA,IACf,cAAcA,GAAE,QAAQ,KAAK,EAAE,QAAQ,KAAK;AAAA,EAC9C,CAAC;AAAA,EACD,WAAW,MAAM;AACnB,CAAC;;;ACTD,SAAS,KAAAC,UAAS;AAGX,IAAM,MAAM,2BAA2B;AAAA,EAC5C,cAAc;AAAA,EACd,QAAQC,GAAE,OAAO;AAAA,IACf,cAAcA,GAAE,QAAQ,KAAK,EAAE,QAAQ,KAAK;AAAA,EAC9C,CAAC;AAAA,EACD,WAAW,MAAM;AACnB,CAAC;;;ACTD,SAAS,KAAAC,UAAS;AAMX,IAAM,MAAM,2BAA2B;AAAA,EAC5C,cAAc;AAAA,EACd,QAAQC,GAAE,OAAO;AAAA,IACf,cAAcA,GAAE,QAAQ,KAAK,EAAE,QAAQ,KAAK;AAAA,EAC9C,CAAC;AAAA,EACD,WAAW,MAAM;AACnB,CAAC;;;ACZD,SAAS,KAAAC,UAAS;AAMX,IAAM,MAAM,2BAA2B;AAAA,EAC5C,cAAc;AAAA,EACd,QAAQC,GAAE,OAAO;AAAA,IACf,cAAcA,GAAE,QAAQ,KAAK,EAAE,QAAQ,KAAK;AAAA,EAC9C,CAAC;AAAA,EACD,WAAW,MAAM;AACnB,CAAC;;;ACZD,SAAS,KAAAC,UAAS;AAGX,IAAM,MAAM,2BAA2B;AAAA,EAC5C,cAAc;AAAA,EACd,QAAQC,GAAE,OAAO;AAAA,IACf,cAAcA,GAAE,QAAQ,KAAK,EAAE,QAAQ,KAAK;AAAA,EAC9C,CAAC;AAAA,EACD,WAAW,MAAM;AACnB,CAAC;;;ACTD,SAAS,KAAAC,WAAS;AAGX,IAAM,MAAM,2BAA2B;AAAA,EAC5C,cAAc;AAAA,EACd,QAAQC,IAAE,OAAO;AAAA,IACf,cAAcA,IAAE,QAAQ,KAAK,EAAE,QAAQ,KAAK;AAAA,EAC9C,CAAC;AAAA,EACD,WAAW,MAAM;AACnB,CAAC;;;ACTD,SAAS,KAAAC,WAAS;AAGX,IAAM,MAAM,2BAA2B;AAAA,EAC5C,cAAc;AAAA,EACd,QAAQC,IAAE,OAAO;AAAA,IACf,cAAcA,IAAE,QAAQ,KAAK,EAAE,QAAQ,KAAK;AAAA,EAC9C,CAAC;AAAA,EACD,WAAW,MAAM;AACnB,CAAC;;;ACTD,SAAS,KAAAC,WAAS;AAGX,IAAM,cAAc,2BAA2B;AAAA,EACpD,cAAc;AAAA,EACd,QAAQC,IAAE,OAAO;AAAA,IACf,cAAcA,IAAE,QAAQ,aAAa,EAAE,QAAQ,aAAa;AAAA,IAC5D,aAAaA,IAAE,OAAO;AAAA,IACtB,UAAUA,IAAE,OAAO;AAAA,EACrB,CAAC;AAAA,EACD,WAAW,CAAC,MAAM,IAAI,EAAE,WAAW,IAAI,EAAE,SAAS,QAAQ,CAAC,CAAC;AAC9D,CAAC;;;ACXD,SAAS,KAAAC,WAAS;AAGX,IAAM,WAAW,2BAA2B;AAAA,EACjD,cAAc;AAAA,EACd,QAAQC,IAAE,OAAO;AAAA,IACf,cAAcA,IAAE,QAAQ,UAAU,EAAE,QAAQ,UAAU;AAAA,IACtD,GAAGA,IAAE,OAAO;AAAA,IACZ,GAAGA,IAAE,OAAO;AAAA,EACd,CAAC;AAAA,EACD,WAAW,CAAC,MAAM,IAAI,EAAE,EAAE,QAAQ,CAAC,CAAC,IAAI,EAAE,EAAE,QAAQ,CAAC,CAAC;AACxD,CAAC;;;ACXD,SAAS,KAAAC,WAAS;AAGX,IAAM,mBAAmB,2BAA2B;AAAA,EACzD,cAAc;AAAA,EACd,QAAQC,IAAE,OAAO;AAAA,IACf,cAAcA,IAAE,QAAQ,kBAAkB,EAAE,QAAQ,kBAAkB;AAAA,IACtE,gBAAgBA,IAAE,OAAO;AAAA,IACzB,iBAAiBA,IAAE,OAAO;AAAA,EAC5B,CAAC;AAAA,EACD,UAAU,EAAE,gBAAgB,gBAAgB,GAAG;AAC7C,WAAO,SAAS,cAAc,IAAI,eAAe;AAAA,EACnD;AACF,CAAC;;;ACbD,SAAS,KAAAC,WAAS;AAGX,IAAM,iBAAiB,2BAA2B;AAAA,EACvD,cAAc;AAAA,EACd,QAAQC,IAAE,OAAO;AAAA,IACf,cAAcA,IAAE,QAAQ,gBAAgB,EAAE,QAAQ,gBAAgB;AAAA,IAClE,MAAMA,IAAE,OAAO;AAAA,EACjB,CAAC;AAAA,EACD,UAAU,EAAE,KAAK,GAAG;AAClB,WAAO,KAAK,IAAI;AAAA,EAClB;AACF,CAAC;;;ACZD,SAAS,KAAAC,WAAS;AAGX,IAAM,SAAS,2BAA2B;AAAA,EAC/C,cAAc;AAAA,EACd,QAAQC,IAAE,OAAO;AAAA,IACf,cAAcA,IAAE,QAAQ,QAAQ,EAAE,QAAQ,QAAQ;AAAA,EACpD,CAAC;AAAA,EACD,WAAW,MAAM;AACnB,CAAC;;;ACTD,SAAS,KAAAC,WAAS;AAGX,IAAM,cAAc,2BAA2B;AAAA,EACpD,cAAc;AAAA,EACd,QAAQC,IAAE,OAAO;AAAA,IACf,cAAcA,IAAE,QAAQ,aAAa,EAAE,QAAQ,aAAa;AAAA,IAC5D,MAAMA,IAAE,MAAM,CAACA,IAAE,QAAQ,MAAM,GAAGA,IAAE,QAAQ,QAAQ,CAAC,CAAC;AAAA,IACtD,IAAIA,IACD,MAAM,CAACA,IAAE,QAAQ,IAAI,GAAGA,IAAE,QAAQ,IAAI,CAAC,CAAC,EACxC,SAAS,EACT,QAAQ,IAAI;AAAA,EACjB,CAAC;AAAA,EACD,UAAU,GAAG;AACX,WAAO,GAAG,EAAE,IAAI,GAAG,CAAC,EAAE,KAAK,KAAK,IAAI,EAAE,EAAE,EAAE;AAAA,EAC5C;AACF,CAAC;;;AChBD,SAAS,KAAAC,WAAS;AAGX,IAAM,WAAW,2BAA2B;AAAA,EACjD,cAAc;AAAA,EACd,QAAQC,IAAE,OAAO;AAAA,IACf,cAAcA,IAAE,QAAQ,UAAU,EAAE,QAAQ,UAAU;AAAA,IACtD,aAAaA,IAAE,OAAO;AAAA,EACxB,CAAC;AAAA,EACD,WAAW,CAAC,MAAM,IAAI,EAAE,WAAW;AACrC,CAAC;;;ACVD,SAAS,KAAAC,WAAS;AAGX,IAAM,uBAAuB,2BAA2B;AAAA,EAC7D,cAAc;AAAA,EACd,QAAQC,IAAE,OAAO;AAAA,IACf,cAAcA,IACX,QAAQ,sBAAsB,EAC9B,QAAQ,sBAAsB;AAAA,IACjC,WAAWA,IAAE,QAAQ;AAAA,EACvB,CAAC;AAAA,EACD,UAAU,EAAE,UAAU,GAAG;AACvB,QAAI,CAAC,WAAW;AACd,YAAM,IAAI,MAAM,iBAAiB;AAAA,IACnC;AACA,WAAO;AAAA,EACT;AACF,CAAC;;;ACjBD,SAAS,KAAAC,WAAS;AAGX,IAAM,eAAe,2BAA2B;AAAA,EACrD,cAAc;AAAA,EACd,QAAQC,IAAE,OAAO;AAAA,IACf,cAAcA,IAAE,QAAQ,cAAc,EAAE,QAAQ,cAAc;AAAA,EAChE,CAAC;AAAA,EACD,WAAW,MAAM;AACnB,CAAC;;;ACLM,IAAM,6BAA6B;AAAA,EACxC;AAAA,EACA;AAAA,EACA;AAAA,EACA;AAAA,EACA;AAAA,EACA;AAAA,EACA;AAAA,EACA;AAAA,EACA;AAAA,EACA,GAAS;AAAA,EACT;AAAA,EACA;AAAA,EACA;AAAA,EACA;AAAA,EACA;AAAA,EACA;AAAA,EACA;AAAA,EACA;AAAA,EACA;AAAA,EACA;AAAA,EACA;AACF;;;ACrBO,IAAM,yBAAyB,CACpC,aACG;AACH,SAAO,SACJ,IAAI,CAAC,MAAM;AACV,UAAM,MAAM,2BAA2B,EAAE,YAAY;AACrD,WAAO,IAAI,UAAU,CAAQ;AAAA,EAC/B,CAAC,EACA,KAAK,IAAI;AACd;;;ACRA,IAAM,uBAAN,MAA2B;AAAA,EACzB;AAAA,EAEA,cAAc;AACZ,SAAK,WAAW,CAAC;AAAA,EACnB;AAAA,EAEA,IACE,KACA,OACsB;AACtB,SAAK,SAAS,KAAK;AAAA,MACjB,GAAI;AAAA,QACF,cAAc,2BAA2B,GAAG,EAAE;AAAA,MAChD;AAAA,MACA,GAAG;AAAA,IACL,CAAC;AACD,WAAO;AAAA,EACT;AAAA,EAEA,QAAwC;AACtC,WAAO,KAAK;AAAA,EACd;AACF;AAEO,IAAM,gBAAgB,MAAM,IAAI,qBAAqB;;;AC3BrD,IAAM,qCAAqC,CAAC;AAAA,EACjD;AAAA,EACA;AAAA,EACA,cAAc;AAChB,MAIsC;AACpC,QAAM,UAAU,cAAc;AAG9B,UAAQ,IAAI,OAAO,CAAC,CAAC;AAGrB,QAAM,YAAW,oBAAI,KAAK,GAAE,YAAY;AACxC,UACG,IAAI,kBAAkB;AAAA,IACrB,MAAM,+BAA+B,QAAQ;AAAA,EAC/C,CAAC,EACA,IAAI,kBAAkB;AAAA,IACrB,MAAM;AAAA,EACR,CAAC,EACA,IAAI,oBAAoB;AAAA,IACvB,gBAAgB;AAAA,IAChB,iBAAiB;AAAA,EACnB,CAAC,EACA,IAAI,oBAAoB;AAAA,IACvB,gBAAgB;AAAA,IAChB,iBAAiB;AAAA,EACnB,CAAC,EACA,IAAI,oBAAoB;AAAA,IACvB,gBAAgB;AAAA,IAChB,iBAAiB;AAAA,EACnB,CAAC,EACA,IAAI,QAAQ,EAAE,QAAQ,EAAE,CAAC,EACzB,IAAI,eAAe,EAAE,MAAM,UAAU,IAAI,KAAK,CAAC;AAElD,MAAI,eAAe;AAEnB,QAAM,uBAA+C,CAAC;AAGtD,aAAW,WAAW,aAAa;AACjC,QACE,QAAQ,SAAS,qBACjB,QAAQ,SAAS,cACjB,QAAQ,SAAS,WACjB;AACA,UAAI;AAEJ,UAAI,mBAAmB,SAAS;AAC9B,wBAAgB,QAAQ;AAAA,MAC1B,WACE,QAAQ,SAAS,qBACjB,QAAQ,UAAU,QAClB;AAEA,wBAAgB,KAAK,IAAI,QAAQ,YAAY,QAAQ,WAAW;AAAA,MAClE;AAEA,UAAI,CAAC,cAAe;AAEpB,UAAI,CAAC,qBAAqB,aAAa,GAAG;AACxC,gBAAQ,IAAI,wBAAwB;AAAA,UAClC,WAAW;AAAA,QACb,CAAC;AACD,gBAAQ,IAAI,eAAe;AAAA,UACzB,aAAa;AAAA,UACb,UAAU;AAAA,QACZ,CAAC;AACD,6BAAqB,aAAa,IAAI;AACtC;AAAA,MACF;AAAA,IACF;AAAA,EACF;AAEA,UAAQ,IAAI,gBAAgB,CAAC,CAAC;AAC9B,UAAQ,IAAI,OAAO,CAAC,CAAC;AACrB,UAAQ,IAAI,OAAO,CAAC,CAAC;AAGrB,WAAS,IAAI,IAAI,IAAI,cAAc,KAAK;AACtC,YAAQ,IAAI,YAAY,EAAE,aAAa,EAAE,CAAC;AAC1C,eAAW,WAAW,aAAa;AACjC,UACE,QAAQ,SAAS,qBACjB,QAAQ,SAAS,cACjB,QAAQ,SAAS,WACjB;AACA,YACE,CAAC,cACA,QAAQ,SAAS,qBAAqB,QAAQ,SAAS;AAExD;AACF,YAAI;AAEJ,YAAI,mBAAmB,SAAS;AAC9B,0BAAgB,QAAQ;AAAA,QAC1B;AAEA,YAAI,QAAQ,SAAS,qBAAqB,QAAQ,UAAU,QAAQ;AAClE,0BAAgB,KAAK,IAAI,QAAQ,YAAY,QAAQ,WAAW;AAGhE,cAAI,qBAAqB,aAAa,MAAM,GAAG;AAC7C,kBAAM,eAAe,cAAc,KAAK;AAExC,gBAAI,QAAQ,aAAa,QAAQ,aAAa;AAE5C,oBAAM,UAAU,QAAQ,aAAa,QAAQ,eAAe;AAC5D,sBACG,IAAI,OAAO,CAAC,CAAC,EACb,IAAI,YAAY;AAAA,gBACf,GAAG,QAAQ,IAAI;AAAA,gBACf,GAAG,QAAQ,IAAI;AAAA,cACjB,CAAC,EACA,IAAI,OAAO,CAAC,CAAC,EACb,IAAI,OAAO,CAAC,CAAC,EACb,IAAI,YAAY;AAAA,gBACf,GAAG,QAAQ,IAAI;AAAA,gBACf,GAAG,QAAQ,IAAI;AAAA,cACjB,CAAC,EACA,IAAI,OAAO,CAAC,CAAC,EACb,IAAI,OAAO,CAAC,CAAC;AAAA,YAClB,OAAO;AAEL,oBAAM,UAAU,QAAQ,cAAc,QAAQ,cAAc;AAC5D,sBACG,IAAI,OAAO,CAAC,CAAC,EACb,IAAI,YAAY;AAAA,gBACf,GAAG,QAAQ;AAAA,gBACX,IAAI,QAAQ,IAAI,UAAU;AAAA,cAC5B,CAAC,EACA,IAAI,OAAO,CAAC,CAAC,EACb,IAAI,OAAO,CAAC,CAAC,EACb,IAAI,YAAY;AAAA,gBACf,GAAG,QAAQ;AAAA,gBACX,IAAI,QAAQ,IAAI,UAAU;AAAA,cAC5B,CAAC,EACA,IAAI,OAAO,CAAC,CAAC,EACb,IAAI,OAAO,CAAC,CAAC;AAAA,YAClB;AAAA,UACF;AAAA,QACF,WAAW,CAAC,cAAe;AAAA,iBAClB,qBAAqB,aAAa,MAAM,GAAG;AAClD,kBAAQ,IAAI,YAAY;AAAA,YACtB,GAAG,QAAQ;AAAA,YACX,GAAG,QAAQ,KAAK,cAAc,KAAK;AAAA,UACrC,CAAC;AAAA,QACH;AAAA,MACF;AAAA,IACF;AAAA,EACF;AAEA,UAAQ,IAAI,OAAO,CAAC,CAAC;AAErB,SAAO,QAAQ,MAAM;AACvB;;;AClKA,SAAS,KAAAC,WAAS;;;ACWX,IAAM,sBAAsB,CAGjC;AAAA,EACA;AAAA,EACA;AAAA,EACA;AACF,MAI8B;AAC5B,SAAO;AAAA,IACL;AAAA,IACA;AAAA,IACA;AAAA,EACF;AACF;;;ADzBO,IAAM,4BAA4B,oBAAoB;AAAA,EAC3D,cAAc;AAAA,EACd,QAAQC,IACL,OAAO;AAAA,IACN,cAAcA,IAAE,QAAQ,IAAI,EAAE,QAAQ,IAAI;AAAA,IAC1C,gBAAgBA,IAAE,OAAO;AAAA,IACzB,iBAAiBA,IAAE,OAAO;AAAA,EAC5B,CAAC,EACA;AAAA,IACC;AAAA,EACF;AAAA,EACF,WAAW,CAAC,EAAE,gBAAgB,gBAAgB,MAAM;AAClD,WAAO,MAAM,cAAc,IAAI,eAAe;AAAA,EAChD;AACF,CAAC;;;AEjBD,SAAS,KAAAC,WAAS;AAGX,IAAM,wBAAwB,oBAAoB;AAAA,EACvD,cAAc;AAAA,EACd,QAAQC,IACL,OAAO;AAAA,IACN,cAAcA,IAAE,QAAQ,IAAI,EAAE,QAAQ,IAAI;AAAA,IAC1C,gBAAgBA,IAAE,OAAO;AAAA,IACzB,iBAAiBA,IAAE,OAAO;AAAA,EAC5B,CAAC,EACA,SAAS,8CAA8C;AAAA,EAC1D,WAAW,CAAC,EAAE,gBAAgB,gBAAgB,MAAM;AAClD,WAAO,OAAO,cAAc,IAAI,eAAe;AAAA,EACjD;AACF,CAAC;;;ACfD,SAAS,KAAAC,WAAS;AAGX,IAAM,0BAA0B,oBAAoB;AAAA,EACzD,cAAc;AAAA,EACd,QAAQC,IACL,OAAO;AAAA,IACN,cAAcA,IAAE,QAAQ,IAAI,EAAE,QAAQ,IAAI;AAAA,IAC1C,gBAAgBA,IAAE,OAAO;AAAA,IACzB,iBAAiBA,IAAE,OAAO;AAAA,EAC5B,CAAC,EACA;AAAA,IACC;AAAA,EACF;AAAA,EACF,WAAW,CAAC,EAAE,gBAAgB,gBAAgB,MAAM;AAClD,WAAO,MAAM,cAAc,IAAI,eAAe;AAAA,EAChD;AACF,CAAC;;;ACjBD,SAAS,KAAAC,WAAS;AAGX,IAAM,iBAAiB,oBAAoB;AAAA,EAChD,cAAc;AAAA,EACd,QAAQC,IACL,OAAO;AAAA,IACN,cAAcA,IAAE,QAAQ,IAAI,EAAE,QAAQ,IAAI;AAAA,IAC1C,OAAOA,IAAE,OAAO;AAAA,EAClB,CAAC,EACA;AAAA,IACC;AAAA,EACF;AAAA,EACF,YAAY;AACV,WAAO;AAAA,EACT;AACF,CAAC;;;AChBD,SAAS,KAAAC,WAAS;AAGX,IAAM,UAAU,oBAAoB;AAAA,EACzC,cAAc;AAAA,EACd,QAAQC,IACL,OAAO;AAAA,IACN,cAAcA,IAAE,QAAQ,KAAK,EAAE,QAAQ,KAAK;AAAA,IAC5C,SAASA,IAAE,OAAO;AAAA,EACpB,CAAC,EACA;AAAA,IACC;AAAA,EACF;AAAA,EACF,WAAW,CAAC,MAAM;AAChB,WAAO,OAAO,EAAE,OAAO;AAAA,EACzB;AACF,CAAC;;;AChBD,SAAS,KAAAC,WAAS;AAGX,IAAM,aAAa,oBAAoB;AAAA,EAC5C,cAAc;AAAA,EACd,QAAQC,IACL,OAAO;AAAA,IACN,cAAcA,IAAE,QAAQ,KAAK,EAAE,QAAQ,KAAK;AAAA,IAC5C,gBAAgBA,IAAE,OAAO;AAAA,EAC3B,CAAC,EACA;AAAA,IACC;AAAA,EACF;AAAA,EACF,YAAY;AACV,WAAO;AAAA,EACT;AACF,CAAC;;;AChBD,SAAS,KAAAC,WAAS;AAGX,IAAM,kBAAkB,oBAAoB;AAAA,EACjD,cAAc;AAAA,EACd,QAAQC,IACL,OAAO;AAAA,IACN,cAAcA,IAAE,QAAQ,IAAI,EAAE,QAAQ,IAAI;AAAA,IAC1C,eAAeA,IAAE,OAAO;AAAA,EAC1B,CAAC,EACA;AAAA,IACC;AAAA,EACF;AAAA,EACF,YAAY;AACV,WAAO;AAAA,EACT;AACF,CAAC;;;AChBD,SAAS,KAAAC,WAAS;AAGX,IAAM,iCAAiC,oBAAoB;AAAA,EAChE,cAAc;AAAA,EACd,QAAQC,IACL,OAAO;AAAA,IACN,cAAcA,IAAE,QAAQ,IAAI,EAAE,QAAQ,IAAI;AAAA,IAC1C,YAAYA,IAAE,OAAO;AAAA,IACrB,eAAeA,IAAE,OAAO;AAAA,EAC1B,CAAC,EACA,SAAS,wDAAwD;AAAA,EACpE,UAAU,EAAE,YAAY,cAAc,GAAG;AACvC,WAAO,MAAM,UAAU;AAAA,EAAM,aAAa;AAAA,EAC5C;AACF,CAAC;;;ACfD,SAAS,KAAAC,WAAS;AAGX,IAAM,mBAAmB,oBAAoB;AAAA,EAClD,cAAc;AAAA,EACd,QAAQC,IACL,OAAO;AAAA,IACN,cAAcA,IAAE,QAAQ,IAAI,EAAE,QAAQ,IAAI;AAAA,IAC1C,WAAWA,IAAE,OAAO,EAAE,SAAS;AAAA,EACjC,CAAC,EACA;AAAA,IACC;AAAA,EACF;AAAA,EACF,UAAU,EAAE,UAAU,GAAG;AACvB,QAAI,CAAC,WAAW;AACd,aAAO;AAAA,IACT;AACA,WAAO,MAAM,SAAS;AAAA,EACxB;AACF,CAAC;;;ACnBD,SAAS,KAAAC,WAAS;AAGX,IAAM,cAAc,oBAAoB;AAAA,EAC7C,cAAc;AAAA,EACd,QAAQC,IACL,OAAO;AAAA,IACN,cAAcA,IAAE,QAAQ,KAAK,EAAE,QAAQ,KAAK;AAAA,EAC9C,CAAC,EACA,SAAS,mBAAmB;AAAA,EAC/B,YAAY;AACV,WAAO;AAAA,EACT;AACF,CAAC;;;ACbD,SAAS,KAAAC,WAAS;AAEX,IAAM,uBAAuBA,IACjC,OAAO;AAAA,EACN,cAAcA,IAAE,QAAQ,KAAK;AAAA,EAC7B,WAAWA,IAAE,OAAO;AACtB,CAAC,EACA,SAAS,iDAAiD;;;ACP7D,SAAS,KAAAC,WAAS;;;ACcX,IAAM,iCAAiC,CAC5C,kBACW;AACX,QAAM,gBAAgB,gBAAgB;AACtC,MAAI,iBAAiB,cAAc,QAAQ,CAAC;AAE5C,SAAO,eAAe,SAAS,GAAG;AAChC,QAAI,gBAAgB,GAAG;AACrB,uBAAiB,KAAK,eAAe,MAAM,CAAC,CAAC;AAAA,IAC/C,OAAO;AACL,uBAAiB,IAAI,cAAc;AAAA,IACrC;AAAA,EACF;AACA,SAAO;AACT;;;ADxBO,IAAM,kBAAkB,oBAAoB;AAAA,EACjD,cAAc;AAAA,EACd,QAAQC,IACL,OAAO;AAAA,IACN,cAAcA,IAAE,QAAQ,KAAK,EAAE,QAAQ,KAAK;AAAA,IAC5C,GAAGA,IAAE,OAAO;AAAA,IACZ,GAAGA,IAAE,OAAO;AAAA,EACd,CAAC,EACA;AAAA,IACC;AAAA,EACF;AAAA,EACF,UAAU,EAAE,GAAG,EAAE,GAAG;AAClB,UAAM,CAAC,IAAI,EAAE,IAAI,CAAC,GAAG,CAAC,EAAE;AAAA,MAAI,CAAC,UAC3B,+BAA+B,KAAK;AAAA,IACtC;AACA,WAAO,IAAI,EAAE,IAAI,EAAE;AAAA,EACrB;AACF,CAAC;;;AErBD,SAAS,KAAAC,WAAS;AAEX,IAAM,iBAAiBA,IAC3B,OAAO;AAAA,EACN,cAAcA,IAAE,QAAQ,IAAI;AAAA,EAC5B,WAAWA,IAAE,OAAO;AACtB,CAAC,EACA,SAAS,mEAAmE;;;ACP/E,SAAS,KAAAC,WAAS;AAEX,IAAM,gBAAgBA,IAC1B,OAAO;AAAA,EACN,cAAcA,IAAE,QAAQ,IAAI;AAAA,EAC5B,UAAUA,IAAE,OAAO;AACrB,CAAC,EACA;AAAA,EACC;AACF;;;ACTF,SAAS,KAAAC,WAAS;AAGX,IAAM,gBAAgB,oBAAoB;AAAA,EAC/C,cAAc;AAAA,EACd,QAAQC,IACL,OAAO;AAAA,IACN,cAAcA,IAAE,QAAQ,IAAI,EAAE,QAAQ,IAAI;AAAA,IAC1C,kBAAkBA,IAAE,OAAO;AAAA,EAC7B,CAAC,EACA;AAAA,IACC;AAAA,EACF;AAAA,EACF,WAAW,CAAC,EAAE,iBAAiB,MAAM;AACnC,WAAO,MAAM,gBAAgB;AAAA,EAC/B;AACF,CAAC;;;AChBD,SAAS,KAAAC,WAAS;AAEX,IAAM,eAAeA,IACzB,OAAO;AAAA,EACN,cAAcA,IAAE,QAAQ,IAAI;AAAA,EAC5B,SAASA,IAAE,OAAO;AACpB,CAAC,EACA,SAAS,gEAAgE;;;ACN5E,SAAS,KAAAC,WAAS;AAGX,IAAM,iBAAiB,oBAAoB;AAAA,EAChD,cAAc;AAAA,EACd,QAAQC,IACL,OAAO;AAAA,IACN,cAAcA,IAAE,QAAQ,KAAK,EAAE,QAAQ,KAAK;AAAA,IAC5C,GAAGA,IAAE,OAAO;AAAA,IACZ,GAAGA,IAAE,OAAO;AAAA,EACd,CAAC,EACA;AAAA,IACC;AAAA,EACF;AAAA,EACF,UAAU,EAAE,GAAG,EAAE,GAAG;AAClB,UAAM,CAAC,IAAI,EAAE,IAAI,CAAC,GAAG,CAAC,EAAE;AAAA,MAAI,CAAC,UAC3B,+BAA+B,KAAK;AAAA,IACtC;AACA,WAAO,IAAI,EAAE,IAAI,EAAE;AAAA,EACrB;AACF,CAAC;;;ACrBD,SAAS,KAAAC,WAAS;AAIX,IAAM,iBAAiB,oBAAoB;AAAA,EAChD,cAAc;AAAA,EACd,QAAQC,IACL,OAAO;AAAA,IACN,cAAcA,IAAE,QAAQ,KAAK,EAAE,QAAQ,KAAK;AAAA,IAC5C,GAAGA,IAAE,OAAO;AAAA,IACZ,GAAGA,IAAE,OAAO;AAAA,EACd,CAAC,EACA;AAAA,IACC;AAAA,EACF;AAAA,EACF,UAAU,EAAE,GAAG,EAAE,GAAG;AAClB,UAAM,CAAC,IAAI,EAAE,IAAI,CAAC,GAAG,CAAC,EAAE;AAAA,MAAI,CAAC,UAC3B,+BAA+B,KAAK;AAAA,IACtC;AACA,WAAO,IAAI,EAAE,IAAI,EAAE;AAAA,EACrB;AACF,CAAC;;;ACrBD,SAAS,KAAAC,WAAS;AAEX,IAAM,wBAAwBA,IAClC,OAAO;AAAA,EACN,cAAcA,IAAE,QAAQ,IAAI;AAAA,EAC5B,QAAQA,IAAE,OAAO;AACnB,CAAC,EACA,SAAS,0DAA0D;;;ACPtE,SAAS,KAAAC,WAAS;AAEX,IAAM,8BAA8BA,IACxC,OAAO;AAAA,EACN,cAAcA,IAAE,QAAQ,KAAK;AAAA,EAC7B,QAAQA,IAAE,OAAO;AACnB,CAAC,EACA,SAAS,0DAAqD;;;ACPjE,SAAS,KAAAC,WAAS;AAGX,IAAM,0CAA0C,oBAAoB;AAAA,EACzE,cAAc;AAAA,EACd,QAAQC,IACL,OAAO;AAAA,IACN,cAAcA,IAAE,QAAQ,KAAK;AAAA,EAC/B,CAAC,EACA;AAAA,IACC;AAAA,EACF;AAAA,EACF,YAAY;AACV,WAAO;AAAA,EACT;AACF,CAAC;;;ACfD,SAAS,KAAAC,WAAS;AAGX,IAAM,iDACX,oBAAoB;AAAA,EAClB,cAAc;AAAA;AAAA,EACd,QAAQC,IACL,OAAO;AAAA,IACN,cAAcA,IAAE,QAAQ,KAAK;AAAA,EAC/B,CAAC,EACA;AAAA,IACC;AAAA,EACF;AAAA,EACF,YAAY;AACV,WAAO;AAAA,EACT;AACF,CAAC;;;AChBH,SAAS,KAAAC,WAAS;AAGX,IAAM,8BAA8B,oBAAoB;AAAA,EAC7D,cAAc;AAAA,EACd,QAAQC,IACL,OAAO;AAAA,IACN,cAAcA,IAAE,QAAQ,KAAK,EAAE,QAAQ,KAAK;AAAA,EAC9C,CAAC,EACA;AAAA,IACC;AAAA,EACF;AAAA,EACF,YAAY;AACV,WAAO;AAAA,EACT;AACF,CAAC;;;ACfD,SAAS,KAAAC,WAAS;AAGX,IAAM,WAAW,oBAAoB;AAAA,EAC1C,cAAc;AAAA,EACd,QAAQC,IACL,OAAO;AAAA,IACN,cAAcA,IAAE,QAAQ,IAAI,EAAE,QAAQ,IAAI;AAAA,IAC1C,MAAMA,IAAE,KAAK,CAAC,MAAM,IAAI,CAAC;AAAA,EAC3B,CAAC,EACA,SAAS,0CAA0C;AAAA,EACtD,UAAU,EAAE,KAAK,GAAG;AAClB,WAAO,MAAM,IAAI;AAAA,EACnB;AACF,CAAC;;;ACdD,SAAS,KAAAC,WAAS;AAEX,IAAM,yBAAyBA,IACnC,OAAO;AAAA,EACN,cAAcA,IAAE,QAAQ,KAAK;AAAA,EAC7B,WAAWA,IAAE,OAAO;AACtB,CAAC,EACA;AAAA,EACC;AACF;;;ACTF,SAAS,KAAAC,WAAS;AAEX,IAAM,kBAAkBA,IAC5B,OAAO;AAAA,EACN,cAAcA,IAAE,QAAQ,IAAI;AAAA,EAC5B,WAAWA,IAAE,OAAO;AACtB,CAAC,EACA,SAAS,8DAA8D;;;ACP1E,SAAS,KAAAC,WAAS;AAGX,IAAM,uBAAuB,oBAAoB;AAAA,EACtD,cAAc;AAAA,EACd,QAAQC,IAAE,OAAO;AAAA,IACf,cAAcA,IAAE,QAAQ,IAAI,EAAE,QAAQ,IAAI;AAAA,IAC1C,oBAAoBA,IACjB,MAAM,CAACA,IAAE,QAAQ,GAAG,EAAE,SAAS,uBAAuB,GAAGA,IAAE,QAAQ,GAAG,CAAC,CAAC,EACxE,SAAS,EACT,QAAQ,IAAI;AAAA,IACf,qBAAqBA,IAClB,MAAM;AAAA,MACLA,IAAE,QAAQ,GAAG,EAAE,SAAS,mBAAmB;AAAA,MAC3CA,IAAE,QAAQ,GAAG,EAAE,SAAS,sBAAsB;AAAA,IAChD,CAAC,EACA,QAAQ,GAAG;AAAA,IACd,kBAAkBA,IAAE,OAAO,EAAE,IAAI,EAAE,QAAQ,CAAC;AAAA,IAC5C,kBAAkBA,IAAE,OAAO,EAAE,IAAI,EAAE,QAAQ,CAAC;AAAA,IAC5C,kBAAkBA,IAAE,OAAO,EAAE,IAAI,EAAE,QAAQ,CAAC;AAAA,IAC5C,kBAAkBA,IAAE,OAAO,EAAE,IAAI,EAAE,QAAQ,CAAC;AAAA,EAC9C,CAAC;AAAA,EACD,WAAW,MAAM;AACf,WAAO;AAAA,EACT;AACF,CAAC;;;ACzBD,SAAS,KAAAC,WAAS;AAGX,IAAM,qBAAqB,oBAAoB;AAAA,EACpD,cAAc;AAAA,EACd,QAAQC,IACL,OAAO;AAAA,IACN,cAAcA,IAAE,QAAQ,IAAI,EAAE,QAAQ,IAAI;AAAA,IAC1C,UAAUA,IAAE,KAAK,CAAC,KAAK,GAAG,CAAC;AAAA,EAC7B,CAAC,EACA;AAAA,IACC;AAAA,EACF;AAAA,EACF,UAAU,EAAE,SAAS,GAAG;AACtB,WAAO,MAAM,QAAQ;AAAA,EACvB;AACF,CAAC;;;AChBD,SAAS,KAAAC,WAAS;AAIlB,IAAM,kBAAkBC,IAAE,OAAO;AAAA,EAC/B,wBAAwBA,IAAE,QAAQ,GAAG,EAAE,SAAS,QAAQ;AAAA,EACxD,UAAUA,IAAE,OAAO;AAAA,EACnB,eAAeA,IAAE,OAAO,EAAE,SAAS;AACrC,CAAC;AAED,IAAM,qBAAqBA,IAAE,OAAO;AAAA,EAClC,wBAAwBA,IAAE,QAAQ,GAAG,EAAE,SAAS,WAAW;AAAA,EAC3D,QAAQA,IAAE,OAAO;AAAA,EACjB,QAAQA,IAAE,OAAO;AAAA,EACjB,eAAeA,IAAE,OAAO,EAAE,SAAS;AACrC,CAAC;AAED,IAAM,mBAAmBA,IAAE,OAAO;AAAA,EAChC,wBAAwBA,IAAE,QAAQ,GAAG,EAAE,SAAS,SAAS;AAAA,EACzD,QAAQA,IAAE,OAAO;AAAA,EACjB,QAAQA,IAAE,OAAO;AAAA,EACjB,eAAeA,IAAE,OAAO,EAAE,SAAS;AACrC,CAAC;AAED,IAAM,mBAAmBA,IAAE,OAAO;AAAA,EAChC,wBAAwBA,IAAE,QAAQ,GAAG,EAAE,SAAS,SAAS;AAAA,EACzD,gBAAgBA,IAAE,OAAO;AAAA,EACzB,oBAAoBA,IAAE,OAAO,EAAE,IAAI;AAAA,EACnC,UAAUA,IAAE,OAAO,EAAE,SAAS;AAAA,EAC9B,eAAeA,IAAE,OAAO,EAAE,SAAS;AACrC,CAAC;AAED,IAAM,oCAAoCA,IAAE;AAAA,EAC1C;AAAA,EACA,CAAC,iBAAiB,oBAAoB,kBAAkB,gBAAgB;AAC1E;AAEA,IAAM,qBAAqBA,IAAE,OAAO;AAAA,EAClC,YAAYA,IAAE,QAAQ,UAAU;AAAA,EAChC,QAAQA,IAAE,OAAO;AAAA,EACjB,QAAQA,IAAE,OAAO;AAAA,EACjB,iBAAiBA,IAAE,OAAO;AAAA,EAC1B,sBAAsBA,IAAE,OAAO;AACjC,CAAC;AAED,IAAM,qBAAqBA,IAAE,OAAO;AAAA,EAClC,YAAYA,IAAE,QAAQ,UAAU;AAAA,EAChC,QAAQA,IAAE,OAAO;AAAA,EACjB,QAAQA,IAAE,OAAO;AAAA,EACjB,iBAAiBA,IAAE,OAAO;AAAA,EAC1B,sBAAsBA,IAAE,OAAO;AACjC,CAAC;AAED,IAAM,qBAAqBA,IAAE,OAAO;AAAA,EAClC,YAAYA,IAAE,QAAQ,WAAW;AAAA,EACjC,eAAeA,IAAE,OAAO;AAAA,EACxB,YAAYA,IAAE,OAAO;AAAA,EACrB,YAAYA,IAAE,OAAO;AAAA,EACrB,YAAYA,IAAE,OAAO;AAAA,EACrB,YAAYA,IAAE,OAAO;AAAA,EACrB,YAAYA,IAAE,OAAO;AAAA,EACrB,YAAYA,IAAE,OAAO;AAAA,EACrB,YAAYA,IAAE,OAAO;AAAA,EACrB,YAAYA,IAAE,OAAO;AACvB,CAAC;AAED,IAAM,iCAAiCA,IAAE,mBAAmB,cAAc;AAAA,EACxE;AAAA,EACA;AAAA,EACA;AACF,CAAC;AAED,IAAM,2BAA2BA,IAAE,MAAM;AAAA,EACvC;AAAA,EACA;AACF,CAAC;AAEM,IAAM,2BAA2B,oBAAoB;AAAA,EAC1D,cAAc;AAAA,EACd,QAAQ,yBAAyB;AAAA,IAC/BA,IAAE,OAAO;AAAA,MACP,cAAcA,IAAE,QAAQ,KAAK,EAAE,QAAQ,KAAK;AAAA,MAC5C,iBAAiBA,IAAE,OAAO,EAAE,IAAI;AAAA,IAClC,CAAC;AAAA,EACH;AAAA,EACA,UAAU,OAAO;AACf,QAAI,gBAAgB,OAAO;AACzB,YAAM,EAAE,iBAAiB,WAAW,IAAI;AACxC,UAAI,gBAAgB,OAAO,eAAe,GAAG,UAAU;AAEvD,UAAI,eAAe,cAAc,eAAe,YAAY;AAC1D,yBAAiB,GAAG,MAAM,OAAO,QAAQ,CAAC,CAAC,IAAI,MAAM,OAAO,QAAQ,CAAC,CAAC,IAAI,MAAM,gBAAgB,QAAQ,CAAC,CAAC,IAAI,MAAM,qBAAqB,QAAQ,CAAC,CAAC;AAAA,MACrJ,WAAW,eAAe,aAAa;AAErC,cAAM,IAAI,MAAM,qCAAqC;AAAA,MACvD;AAEA,uBAAiB;AACjB,aAAO;AAAA,IACT;AACA,QAAI,4BAA4B,OAAO;AACrC,YAAM,EAAE,iBAAiB,uBAAuB,IAAI;AACpD,UAAI,gBAAgB,OAAO,eAAe,GAAG,sBAAsB;AAEnE,UAAI,2BAA2B,KAAK;AAClC,yBAAiB,GAAG,MAAM,SAAS,QAAQ,CAAC,CAAC;AAAA,MAC/C,WACE,2BAA2B,OAC3B,2BAA2B,KAC3B;AACA,yBAAiB,GAAG,MAAM,OAAO,QAAQ,CAAC,CAAC,IAAI,MAAM,OAAO,QAAQ,CAAC,CAAC;AAAA,MACxE,WAAW,2BAA2B,KAAK;AACzC,yBAAiB,GAAG,MAAM,cAAc,IAAI,MAAM,kBAAkB,IAClE,MAAM,WAAW,IAAI,MAAM,QAAQ,KAAK,EAC1C;AAAA,MACF;AAEA,UAAI,MAAM,eAAe;AACvB,yBAAiB,IAAI,MAAM,cAAc,QAAQ,CAAC,CAAC;AAAA,MACrD;AAEA,uBAAiB;AAEjB,aAAO;AAAA,IACT;AACA,UAAM,IAAI;AAAA,MACR,qCAAqC,KAAK,UAAU,KAAK,CAAC;AAAA,IAC5D;AAAA,EACF;AACF,CAAC;;;ACjID,SAAS,KAAAC,WAAS;AAGX,IAAM,kBAAkB,oBAAoB;AAAA,EACjD,cAAc;AAAA,EACd,QAAQC,IAAE,OAAO;AAAA,IACf,cAAcA,IAAE,QAAQ,GAAG,EAAE,QAAQ,GAAG;AAAA,IACxC,iBAAiBA,IAAE,OAAO,EAAE,IAAI;AAAA,EAClC,CAAC;AAAA,EACD,UAAU,EAAE,gBAAgB,GAAG;AAC7B,WAAO,IAAI,eAAe;AAAA,EAC5B;AACF,CAAC;;;ACsBM,IAAM,qBAAqB;AAAA,EAChC;AAAA,EACA;AAAA,EACA;AAAA,EACA;AAAA,EACA;AAAA,EACA;AAAA,EACA;AAAA,EACA;AAAA,EACA;AAAA,EACA;AAAA,EACA;AAAA,EACA;AAAA;AAAA;AAAA,EAGA;AAAA;AAAA;AAAA,EAGA;AAAA;AAAA,EAEA;AAAA;AAAA;AAAA,EAGA;AAAA,EACA;AAAA,EACA;AAAA,EACA;AAAA,EACA;AAAA,EACA;AAAA,EACA;AAAA;AAAA;AAGF;;;AC9DO,IAAM,gBAAgB,MAAM,IAAI,cAAc;AAErD,IAAM,gBAAN,MAAoB;AAAA,EAClB;AAAA,EAEA,cAAc;AACZ,SAAK,WAAW,CAAC;AAAA,EACnB;AAAA,EAEA,IACE,WACA,IACe;AACf,QAAI,WAAW;AACb,aAAO,GAAG,IAAI;AAAA,IAChB;AACA,WAAO;AAAA,EACT;AAAA,EAEA,IACE,KACA,OACe;AACf,SAAK,SAAS,KAAK;AAAA,MACjB,GAAI,EAAE,cAAc,mBAAmB,GAAG,EAAE,aAAa;AAAA,MACzD,GAAG;AAAA,IACL,CAAC;AACD,WAAO;AAAA,EACT;AAAA,EAEA,QAAiC;AAC/B,WAAO,KAAK;AAAA,EACd;AACF;;;AClCO,IAAM,yBAAyB,CAAC,YAAsC;AAC3E,QAAM,cAAc,OAAO,OAAO,kBAAkB,EAAE;AAAA,IACpD,CAAC,QAAQ,IAAI,iBAAiB,QAAQ;AAAA,EACxC;AAEA,MAAI,CAAC,aAAa;AAChB,UAAM,IAAI;AAAA,MACR,6BAA6B,QAAQ,YAAY;AAAA,IACnD;AAAA,EACF;AAEA,MAAI,CAAC,YAAY,WAAW;AAC1B,UAAM,IAAI;AAAA,MACR,6BAA6B,QAAQ,YAAY;AAAA,IACnD;AAAA,EACF;AAEA,SAAO,YAAY,UAAU,OAAc;AAC7C;;;ACjBO,IAAM,+BAA+B,CAC1C,kBACoC;AACpC,QAAM,2BAA4D,CAAC;AACnE,aAAW,aAAa,OAAO,KAAK,aAAa,GAAwB;AACvE,6BAAyB,SAAS,IAAI,cAAc,SAAS,EAC1D,IAAI,CAAC,YAAY;AAChB,aAAO,uBAAuB,OAAO;AAAA,IACvC,CAAC,EACA,KAAK,IAAI;AAAA,EACd;AACA,SAAO;AACT;;;ACbO,IAAM,0BAA0B,CACrC,aACW;AACX,SAAO,SACJ,IAAI,CAAC,YAAY;AAChB,WAAO,uBAAuB,OAAO;AAAA,EACvC,CAAC,EACA,KAAK,IAAI;AACd;;;ACRO,SAAS,MAAS,KAA8B;AACrD,QAAM,SAAwB,CAAC;AAC/B,WAAS,IAAI,GAAG,IAAI,IAAI,SAAS,GAAG,KAAK;AACvC,WAAO,KAAK,CAAC,IAAI,CAAC,GAAG,IAAI,IAAI,CAAC,CAAC,CAAC;AAAA,EAClC;AACA,SAAO;AACT;;;ACNO,IAAM,qBAAqB,CAAC,WAAoC;AACrE,SAAO;AAAA,IACL,GAAG,cAAc,EACd,IAAI,WAAW,EAAE,SAAS,wBAAwB,CAAC,EACnD,IAAI,kCAAkC;AAAA,MACrC,YAAY;AAAA,MACZ,eAAe;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA,EAYrB,KAAK;AAAA,IACD,CAAC,EACA,IAAI,kCAAkC;AAAA,MACrC,YAAY;AAAA,MACZ,eAAe;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA,EAWrB,KAAK;AAAA,IACD,CAAC,EACA,IAAI,kCAAkC;AAAA,MACrC,YAAY;AAAA,MACZ,eAAe;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA,EAgBrB,KAAK;AAAA,IACD,CAAC,EACA,IAAI,WAAW,EAAE,SAAS,sBAAsB,CAAC,EACjD,MAAM;AAAA,EACX;AACF;;;AClDA,OAAO,qBAAqB;;;ACTrB,SAAS,kBACd,MAC4B;AAC5B,QAAM,aAAa,KAAK;AAAA,IACtB,CAAC,QAAyB,IAAI,SAAS;AAAA,EACzC;AAEA,QAAM,SAAwC,CAAC;AAE/C,aAAW,SAAS,YAAY;AAC9B,eAAW,WAAW,MAAM,OAAO;AACjC,UAAI,QAAQ,eAAe,QAAQ;AACjC,eAAO,QAAQ,KAAK,IAAI,OAAO,QAAQ,KAAK,KAAK,oBAAI,IAAY;AACjE,eAAO,QAAQ,KAAK,EAAE,IAAI,QAAQ,KAAK;AAAA,MACzC;AAAA,IACF;AAAA,EACF;AAEA,SAAO;AAAA,IACL,KAAK,MAAM,KAAK,OAAO,OAAO,CAAC,CAAC;AAAA,IAChC,QAAQ,MAAM,KAAK,OAAO,UAAU,CAAC,CAAC;AAAA,EACxC;AACF;;;ADLO,SAAS,wBAAwB;AAAA,EACtC;AAAA,EACA;AAAA,EACA;AACF,GAIG;AACD,QAAM,wBAAwB,MAAM;AAClC,UAAM,0BAA0B,OAAO,OAAO,CAAC,KAAK,YAAY;AAC9D,UAAI,QAAQ,iBAAiB,OAAO;AAClC,eAAO,KAAK,IAAI,KAAK,QAAQ,eAAe;AAAA,MAC9C;AACA,aAAO;AAAA,IACT,GAAG,CAAC;AACJ,QAAI,4BAA4B,GAAG;AACjC,aAAO;AAAA,IACT;AACA,WAAO,0BAA0B;AAAA,EACnC;AAEA,SAAO;AAAA,IACL,GAAG,cAAc,EACd,IAAI,WAAW,EAAE,SAAS,sBAAsB,CAAC,EACjD,MAAM;AAAA,EACX;AAGA,QAAM,cAA0C,kBAAkB,IAAI;AACtE,aAAW,SAAS,YAClB,YAAY,WAAW,IAAI,IAAI,QAAQ,QACzC,GAAG;AACD,WAAO;AAAA,MACL,GAAG,cAAc,EACd,IAAI,4BAA4B;AAAA,QAC/B,iBAAiB,sBAAsB;AAAA,QACvC,wBAAwB;AAAA,QACxB,UAAU;AAAA,MACZ,CAAC,EACA,MAAM;AAAA,IACX;AAAA,EACF;AAGA,QAAM,kBAAkB;AAAA,IACtB;AAAA,IACA,YAAY,WAAW,IAAI,IAAI,QAAQ;AAAA,EACzC;AAEA,aAAW,kBAAkB,iBAAiB;AAC5C,WAAO;AAAA,MACL,GAAG,cAAc,EACd,IAAI,4BAA4B;AAAA,QAC/B,iBAAiB,sBAAsB;AAAA,QACvC,GAAG;AAAA,MACL,CAAC,EACA,MAAM;AAAA,IACX;AAAA,EACF;AAEA,SAAO;AAAA,IACL,GAAG,cAAc,EACd,IAAI,oBAAoB,CAAC,CAAC,EAC1B,IAAI,WAAW,EAAE,SAAS,oBAAoB,CAAC,EAC/C,MAAM;AAAA,EACX;AACF;AAEO,IAAM,iCAAiC,CAC5C,QAC2B;AAC3B,MAAI,IAAI,UAAU,QAAQ;AACxB,WAAO;AAAA,MACL,wBAAwB;AAAA,MACxB,QAAQ,IAAI;AAAA,MACZ,QAAQ,IAAI;AAAA,IACd;AAAA,EACF;AACA,MAAI,IAAI,UAAU,UAAU;AAC1B,WAAO;AAAA,MACL,wBAAwB;AAAA,MACxB,UAAU,IAAI,SAAS;AAAA,IACzB;AAAA,EACF;AACA,MAAI,IAAI,UAAU,gBAAgB;AAEhC,WAAO;AAAA,MACL,wBAAwB;AAAA,MACxB,QAAQ,IAAI;AAAA,MACZ,QAAQ,IAAI;AAAA,IACd;AAAA,EACF;AACA,QAAM,IAAI,MAAM,qBAAsB,IAAY,KAAK,EAAE;AAC3D;AAEO,IAAM,yCAAyC,CACpD,QAC2B;AAC3B,MAAI,kBAAkB,KAAK;AACzB,WAAO;AAAA,MACL,wBAAwB;AAAA,MACxB,UAAU,IAAI;AAAA,IAChB;AAAA,EACF;AACA,QAAM,IAAI,MAAM,6BAA6B,GAAU,EAAE;AAC3D;AAEO,IAAM,yCAAyC,CACpD,QAC2B;AAC3B,MAAI,eAAe,KAAK;AACtB,WAAO;AAAA,MACL,wBAAwB;AAAA,MACxB,UAAU,IAAI,YAAY;AAAA;AAAA,IAC5B;AAAA,EACF;AACA,QAAM,IAAI,MAAM,0BAA0B,GAAU,EAAE;AACxD;AAEO,IAAM,sCAAsC,CACjD,QAC2B;AAC3B,MAAI,IAAI,UAAU,QAAQ;AACxB,WAAO;AAAA,MACL,wBAAwB;AAAA,MACxB,QAAQ,IAAI;AAAA,MACZ,QAAQ,IAAI;AAAA,IACd;AAAA,EACF;AACA,MAAI,IAAI,UAAU,gBAAgB;AAEhC,WAAO;AAAA,MACL,wBAAwB;AAAA,MACxB,QAAQ,IAAI;AAAA,MACZ,QAAQ,IAAI;AAAA,IACd;AAAA,EACF;AACA,MAAI,IAAI,UAAU,UAAU;AAC1B,WAAO;AAAA,MACL,wBAAwB;AAAA,MACxB,UAAU,IAAI,SAAS;AAAA,IACzB;AAAA,EACF;AACA,MAAI,IAAI,UAAU,QAAQ;AACxB,QAAI,EAAE,WAAW,OAAO,YAAY,MAAM;AACxC,YAAM,IAAI;AAAA,QACR;AAAA,MACF;AAAA,IACF;AACA,QAAI,IAAI,SAAS,IAAI,QAAQ;AAC3B,aAAO;AAAA,QACL,YAAY;AAAA,QACZ,QAAQ,IAAI;AAAA,QACZ,QAAQ,IAAI;AAAA,QACZ,iBAAiB,KAAK,IAAI,IAAI,OAAO,IAAI,MAAM;AAAA,QAC/C,sBAAsB,IAAI,QAAQ;AAAA,MACpC;AAAA,IACF;AACA,WAAO;AAAA,MACL,YAAY;AAAA,MACZ,QAAQ,IAAI;AAAA,MACZ,QAAQ,IAAI;AAAA,MACZ,iBAAiB,KAAK,IAAI,IAAI,OAAO,IAAI,MAAM;AAAA,MAC/C,sBAAsB,IAAI,SAAS;AAAA,IACrC;AAAA,EACF;AACA,QAAM,IAAI,MAAM,qBAAsB,IAAY,KAAK,EAAE;AAC3D;AAEO,IAAM,qCAAqC,CAChD,QAC2B;AAC3B,MAAI,IAAI,UAAU,UAAU;AAC1B,QAAI,EAAE,oBAAoB,OAAO,mBAAmB,MAAM;AACxD,YAAM,IAAI;AAAA,QACR;AAAA,MACF;AAAA,IACF;AACA,WAAO;AAAA,MACL,wBAAwB;AAAA,MACxB,UAAU,IAAI;AAAA,IAChB;AAAA,EACF;AACA,MAAI,IAAI,UAAU,QAAQ;AACxB,QAAI,EAAE,iBAAiB,OAAO,kBAAkB,MAAM;AACpD,YAAM,IAAI;AAAA,QACR;AAAA,MACF;AAAA,IACF;AAEA,QAAI,IAAI,cAAc,IAAI,cAAc;AACtC,aAAO;AAAA,QACL,YAAY;AAAA,QACZ,QAAQ,IAAI;AAAA,QACZ,QAAQ,IAAI;AAAA,QACZ,iBAAiB,KAAK,IAAI,IAAI,aAAa,IAAI,YAAY;AAAA,QAC3D,sBAAsB,IAAI,cAAc;AAAA,MAC1C;AAAA,IACF;AACA,WAAO;AAAA,MACL,YAAY;AAAA,MACZ,QAAQ,IAAI;AAAA,MACZ,QAAQ,IAAI;AAAA,MACZ,iBAAiB,KAAK,IAAI,IAAI,aAAa,IAAI,YAAY;AAAA,MAC3D,sBAAsB,IAAI,eAAe;AAAA,IAC3C;AAAA,EACF;AACA,MAAI,IAAI,UAAU,+BAA+B;AAC/C,QAAI,EAAE,oBAAoB,OAAO,qBAAqB,MAAM;AAC1D,YAAM,IAAI;AAAA,QACR;AAAA,MACF;AAAA,IACF;AACA,WAAO;AAAA,MACL,wBAAwB;AAAA,MACxB,QAAQ,IAAI;AAAA,MACZ,QAAQ,IAAI;AAAA,IACd;AAAA,EACF;AACA,QAAM,IAAI;AAAA,IACR,4DAA4D,IAAI,KAAK;AAAA,EACvE;AACF;AAEO,IAAM,qCAAqC,CAChD,QAC2B;AAC3B,MAAI,EAAE,mBAAmB,MAAM;AAC7B,UAAM,IAAI;AAAA,MACR,+DAA+D,IAAI,UAAU;AAAA,IAC/E;AAAA,EACF;AACA,SAAO;AAAA,IACL,wBAAwB;AAAA,IACxB,UAAU,IAAI;AAAA,EAChB;AACF;AAEO,IAAM,8BAA8B,CACzC,QAC2B;AAC3B,MAAI,EAAE,oBAAoB,MAAM;AAC9B,UAAM,IAAI;AAAA,MACR;AAAA,IACF;AAAA,EACF;AACA,SAAO;AAAA,IACL,wBAAwB;AAAA,IACxB,UAAU,IAAI;AAAA,EAChB;AACF;AAEA,SAAS,sCACP,MACA,OAC0B;AAC1B,QAAM,UAAoC,CAAC;AAC3C,QAAM,gBAAgB,oBAAI,IAAY;AAEtC,QAAM,iBAAiB,CAAC,WAAmC;AACzD,UAAM,OAAO,gBAAgB,MAAM;AACnC,QAAI,CAAC,cAAc,IAAI,IAAI,GAAG;AAC5B,cAAQ,KAAK,MAAM;AACnB,oBAAc,IAAI,IAAI;AAAA,IACxB;AAAA,EACF;AAEA,aAAW,OAAO,MAAM;AACtB,QAAI,IAAI,SAAS,cAAc;AAC7B,UAAI,IAAI,UAAU,OAAO;AACvB,uBAAe,+BAA+B,GAAG,CAAC;AAAA,MACpD;AAAA,IACF,WAAW,IAAI,SAAS,oBAAoB;AAC1C,UAAI,IAAI,UAAU,OAAO;AACvB,uBAAe,oCAAoC,GAAG,CAAC;AAAA,MACzD;AAAA,IACF,WAAW,IAAI,SAAS,mBAAmB;AACzC,UAAI,IAAI,OAAO,SAAS,KAAK,GAAG;AAC9B,uBAAe,mCAAmC,GAAG,CAAC;AAAA,MACxD;AAAA,IACF,WAAW,IAAI,SAAS,YAAY;AAClC,UAAI,IAAI,eAAe;AACrB,uBAAe,mCAAmC,GAAG,CAAC;AAAA,UACnD,SAAQ,KAAK,sDAAsD;AAAA,IAC1E,WAAW,IAAI,SAAS,WAAW;AACjC,qBAAe,4BAA4B,GAAG,CAAC;AAAA,IACjD,WAAW,IAAI,SAAS;AACtB,qBAAe,uCAAuC,GAAG,CAAC;AAAA,aACnD,IAAI,SAAS;AACpB,qBAAe,uCAAuC,GAAG,CAAC;AAAA,EAC9D;AAEA,SAAO;AACT;;;AEnTO,IAAM,qBAAqB,CAChC,QACA,kBAKW;AACX,MAAI;AACJ,MAAI,iBAAiB,eAAe;AAClC,UAAM,cAAc,cAAc;AAClC,eAAW,OAAO;AAAA,MAChB,CAAC,YACC,4BAA4B,WAC5B,QAAQ,iBAAiB,SACzB,QAAQ,2BAA2B,OACnC,QAAQ,aAAa;AAAA,IACzB;AAAA,EACF,WACE,4BAA4B,iBAC5B,gBAAgB,eAChB;AACA,eAAW,OAAO;AAAA,MAChB,CAAC,YACC,QAAQ,iBAAiB,SACzB,OAAO,KAAK,aAAa,EAAE;AAAA,QACzB,CAAC,eACC,QAAQ,UAAwC,MAChD,cAAc,UAAwC;AAAA,MAC1D;AAAA,IACJ;AAAA,EACF;AAEA,MAAI,CAAC,UAAU;AAEb,UAAM,IAAI;AAAA,MACR,wCAAwC,KAAK,UAAU,aAAa,CAAC;AAAA,IACvE;AAAA,EACF;AACA,SAAO,SAAS;AAClB;;;AC9CA;AAAA,EACE,MAAQ;AAAA,EACR,SAAW;AAAA,EACX,MAAQ;AAAA,EACR,MAAQ;AAAA,EACR,SAAW;AAAA,IACT,OAAS;AAAA,IACT,QAAU;AAAA,IACV,gBAAgB;AAAA,EAClB;AAAA,EACA,OAAS;AAAA,IACP;AAAA,EACF;AAAA,EACA,KAAO;AAAA,IACL,qBAAqB;AAAA,EACvB;AAAA,EACA,iBAAmB;AAAA,IACjB,kBAAkB;AAAA,IAClB,mBAAmB;AAAA,IACnB,mBAAmB;AAAA,IACnB,cAAc;AAAA,IACd,eAAe;AAAA,IACf,gBAAgB;AAAA,IAChB,UAAY;AAAA,IACZ,iBAAiB;AAAA,IACjB,WAAa;AAAA,IACb,iBAAiB;AAAA,IACjB,eAAe;AAAA,IACf,OAAS;AAAA,IACT,MAAQ;AAAA,IACR,gBAAgB;AAAA,EAClB;AAAA,EACA,kBAAoB;AAAA,IAClB,YAAc;AAAA,IACd,gBAAgB;AAAA,EAClB;AAAA,EACA,cAAgB;AAAA,IACd,uBAAuB;AAAA,IACvB,8BAA8B;AAAA,IAC9B,yBAAyB;AAAA,EAC3B;AACF;;;ACrCA,IAAM,6BAA6B;AAAA,EACjC,cAAc;AAAA,EACd,iBAAiB;AAAA,EACjB,kBAAkB;AAAA,EAClB,qBAAqB;AAAA,EACrB,kBAAkB;AAAA,EAClB,qBAAqB;AAAA,EACrB,aAAa;AAAA,EACb,gBAAgB;AAAA,EAChB,SAAS;AAAA;AAEX;AAiBO,IAAM,oBAAoB,CAAC,SAUR;AACxB,QAAM,gBACJ,2BACG,KAAK,aACF,GAAG,KAAK,KAAK,IAAI,KAAK,UAAU,KAChC,KAAK,KACX;AACF,SACE,cAAc,EACX,IAAI,yBAAyB;AAAA,IAC5B,gBAAgB;AAAA,IAChB,iBAAiB,oCAAoC,gBAAY,OAAO;AAAA,EAC1E,CAAC,EACA,IAAI,yBAAyB;AAAA,IAC5B,gBAAgB;AAAA,IAChB,kBAAiB,oBAAI,KAAK,GAAE,YAAY;AAAA,EAC1C,CAAC,EAKA,IAAI,yBAAyB;AAAA,IAC5B,gBAAgB;AAAA,IAChB,iBAAiB;AAAA,EACnB,CAAC,EACA,IAAI,yBAAyB;AAAA,IAC5B,gBAAgB;AAAA,IAChB,iBAAiB;AAAA,EACnB,CAAC,EACA;AAAA,IAAI,KAAK,UAAU;AAAA,IAAW,CAAC,OAC9B,GAAG,IAAI,yBAAyB;AAAA,MAC9B,gBAAgB;AAAA,MAChB,iBACE,KAAK,eAAe,eAAe,aAAa;AAAA,IACpD,CAAC;AAAA,EACH,EACC,IAAI,wBAAwB,CAAC,CAAC,EAC9B,IAAI,YAAY;AAAA,IACf,MAAM;AAAA,EACR,CAAC,EACA,IAAI,WAAW;AAAA,IACd,SAAS;AAAA,EACX,CAAC,EACA,IAAI,WAAW;AAAA,IACd,SAAS,wCAAuC,oBAAI,KAAK,GAAE,YAAY,CAAC;AAAA,EAC1E,CAAC,EACA,IAAI,+BAA+B,CAAC,CAAC,EACrC,MAAM;AAEb;;;ACxFA,IAAM,yBAAyB;AAAA,EAC7B,KAAK;AAAA,EACL,QAAQ;AACV;AACA,IAAM,0BAA0B;AAAA,EAC9B,QAAQ;AAAA,EACR,YAAY;AAAA,EACZ,YAAY;AAAA,EACZ,MAAM;AAAA,EACN,OAAO;AACT;AAEO,IAAM,qBAAqB,CAChC,WACA,eACoB;AACpB,MAAI,cAAc,UAAW,QAAO;AACpC,SAAO,GAAG,uBAAuB,SAAgD,CAAC,GAAG,wBAAwB,UAAU,CAAC;AAC1H;;;ACFA,SAAS,oBAAoB;AAC7B;AAAA,EACE;AAAA,EACA;AAAA,EACA;AAAA,EACA;AAAA,EACA;AAAA,OAEK;AAKA,IAAM,8BAA8B,CACzC,MACA,OAAkC,CAAC,MACN;AAC7B,OAAK,gBAAgB;AACrB,QAAM,UAAoC;AAAA,IACxC,MAAM,kBAAkB;AAAA,MACtB,OAAO;AAAA,MACP,YAAY;AAAA,IACd,CAAC;AAAA,IACD,cAAc,kBAAkB;AAAA,MAC9B,OAAO;AAAA,MACP,YAAY;AAAA,IACd,CAAC;AAAA,IACD,QAAQ,kBAAkB;AAAA,MACxB,OAAO;AAAA,MACP,YAAY;AAAA,IACd,CAAC;AAAA,IACD,SAAS,kBAAkB;AAAA,MACzB,OAAO;AAAA,MACP,YAAY;AAAA,IACd,CAAC;AAAA,IACD,MAAM,kBAAkB;AAAA,MACtB,OAAO;AAAA,MACP,YAAY;AAAA,IACd,CAAC;AAAA,IACD,cAAc,kBAAkB;AAAA,MAC9B,OAAO;AAAA,MACP,YAAY;AAAA,IACd,CAAC;AAAA,IACD,QAAQ,kBAAkB;AAAA,MACxB,OAAO;AAAA,MACP,YAAY;AAAA,IACd,CAAC;AAAA,IACD,SAAS,kBAAkB;AAAA,MACzB,OAAO;AAAA,MACP,YAAY;AAAA,IACd,CAAC;AAAA,IACD,WAAW,kBAAkB;AAAA,MAC3B,OAAO;AAAA,IACT,CAAC;AAAA,EACH;AAEA,aAAW,eAAe;AAAA,IACxB;AAAA,IACA;AAAA,IACA;AAAA,IACA;AAAA,IACA;AAAA,IACA;AAAA,IACA;AAAA,IACA;AAAA,EACF,GAAY;AACV,UAAM,SAAS,QAAQ,WAAW;AAClC,uBAAmB,MAAM;AACzB,4BAAwB;AAAA,MACtB;AAAA,MACA;AAAA,MACA;AAAA,IACF,CAAC;AAAA,EACH;AAGA,UAAQ,UAAU;AAAA,IAChB,GAAG,cAAc,EACd,IAAI,4BAA4B;AAAA,MAC/B,iBAAiB;AAAA,MACjB,wBAAwB;AAAA,MACxB,UAAU;AAAA;AAAA,IACZ,CAAC,EACA,MAAM;AAAA,EACX;AAKA,QAAM,MAAM,CAAC,MAAe,KAAK,cAAc,CAAC,IAAI;AAEpD,aAAW,SAAS,CAAC,OAAO,UAAU,SAAS,GAAY;AACzD,eAAW,WAAW,MAAM;AAC1B,UAAI,QAAQ,SAAS,aAAa;AAChC,cAAM,EAAE,MAAM,IAAI;AAClB,mBAAW,CAAC,GAAG,CAAC,KAAK,MAAM,KAAK,GAAG;AAKjC,cAAI,EAAE,eAAe,QAAQ;AAC3B,gBAAI,EAAE,UAAU,OAAO;AACrB,oBAAM,SAAS,QAAQ,mBAAmB,OAAO,QAAQ,CAAC;AAC1D,qBAAO;AAAA,gBACL,GAAG,cAAc,EACd,IAAI,mBAAmB;AAAA,kBACtB,iBAAiB,mBAAmB,QAAQ;AAAA,oBAC1C,aAAa,EAAE;AAAA,kBACjB,CAAC;AAAA,gBACH,CAAC,EACA,IAAI,kBAAkB,EAAE,GAAG,EAAE,GAAG,GAAG,IAAI,EAAE,CAAC,EAAE,CAAC,EAC7C,IAAI,kBAAkB,EAAE,GAAG,EAAE,GAAG,GAAG,IAAI,EAAE,CAAC,EAAE,CAAC,EAC7C,MAAM;AAAA,cACX;AAAA,YACF;AAAA,UACF;AAAA,QACF;AAAA,MACF,WAAW,QAAQ,SAAS,uBAAuB;AACjD,YAAI,QAAQ,UAAU,OAAO;AAC3B,gBAAM,SAAS,QAAQ,mBAAmB,OAAO,YAAY,CAAC;AAC9D,gBAAM,iBAAiB,uCAAuC,OAAO;AACrE,gBAAM,SAAS,cAAc,EAAE,IAAI,mBAAmB;AAAA,YACpD,iBAAiB,mBAAmB,QAAQ,cAAc;AAAA,UAC5D,CAAC;AAED,cAAI,QAAQ,MAAM,SAAS,GAAG;AAC5B,mBAAO,IAAI,kBAAkB;AAAA,cAC3B,GAAG,QAAQ,MAAM,CAAC,EAAE;AAAA,cACpB,GAAG,IAAI,QAAQ,MAAM,CAAC,EAAE,CAAC;AAAA,YAC3B,CAAC;AAAA,UACH;AAGA,mBAAS,IAAI,GAAG,IAAI,QAAQ,MAAM,QAAQ,KAAK;AAC7C,mBAAO,IAAI,kBAAkB;AAAA,cAC3B,GAAG,QAAQ,MAAM,CAAC,EAAE;AAAA,cACpB,GAAG,IAAI,QAAQ,MAAM,CAAC,EAAE,CAAC;AAAA,YAC3B,CAAC;AAAA,UACH;AAEA,iBAAO,KAAK,GAAG,OAAO,MAAM,CAAC;AAAA,QAC/B;AAAA,MACF,WAAW,QAAQ,SAAS,uBAAuB;AACjD,YAAI,QAAQ,UAAU,OAAO;AAG3B,gBAAM,mBAAmB;AACzB,gBAAM,SAAS,QAAQ,mBAAmB,OAAO,YAAY,CAAC;AAC9D,gBAAM,iBAAiB,uCAAuC,OAAO;AACrE,gBAAM,SAAS,cAAc,EAAE,IAAI,mBAAmB;AAAA,YACpD,iBAAiB,mBAAmB,QAAQ,cAAc;AAAA,UAC5D,CAAC;AAED,cAAI,WAAW,QAAQ,gBAAgB;AACvC,cAAI,WAAW,QAAQ,gBAAgB;AACvC,gBAAM,WAAW,QAAQ,YAAY;AACrC,gBAAM,gBAAgB,WAAW;AACjC,gBAAM,aAAa,WAAW;AAE9B,gBAAM,YACJ,QAAQ,KAAK,MAAM,EAAE,EAAE,OAAO,CAAC,OAAO,SAAS;AAC7C,gBAAI,SAAS,KAAK;AAChB,qBAAO,QAAQ,aAAa;AAAA,YAC9B;AACA,mBAAO,QAAQ,WAAW;AAAA,UAC5B,GAAG,CAAC,IAAI;AAEV,gBAAM,aAAa;AAEnB,gBAAM,kBACJ,QAAQ,qBACP,MAKgB;AACf,kBAAM,OAAQ,QAAgB;AAM9B,gBAAI,CAAC,KAAM,QAAO;AAClB,oBAAQ,MAAM;AAAA,cACZ,KAAK;AACH,uBAAO;AAAA,cACT,KAAK;AACH,uBAAO;AAAA,cACT,KAAK;AACH,uBAAO;AAAA,cACT,KAAK;AACH,uBAAO;AAAA,YACX;AAAA,UACF,GAAG,KACH;AAEF,kBAAQ,iBAAiB;AAAA,YACvB,KAAK;AACH;AAAA,YACF,KAAK;AACH,0BAAY,YAAY;AACxB;AAAA,YACF,KAAK;AACH,0BAAY;AACZ;AAAA,YACF,KAAK;AACH,0BAAY,aAAa;AACzB;AAAA,YACF,KAAK;AACH,0BAAY;AACZ,0BAAY,aAAa;AACzB;AAAA,YACF,KAAK;AACH,0BAAY;AACZ;AAAA,YACF,KAAK;AACH,0BAAY,YAAY;AACxB,0BAAY;AACZ;AAAA,YACF,KAAK;AACH,0BAAY;AACZ,0BAAY;AACZ;AAAA,YACF;AACE,0BAAY,YAAY;AACxB,0BAAY,aAAa;AACzB;AAAA,UACJ;AAEA,cAAI,YAAY;AAChB,gBAAM,YAAY;AAElB,cAAI,WAAW,QAAQ,gBAAgB;AACvC,gBAAM,KAAK,YAAY,YAAY;AACnC,gBAAM,KAAK,YAAY,aAAa;AACpC,gBAAM,aAAuB,CAAC;AAG9B,cAAI,QAAQ,UAAU,UAAU;AAC9B,uBAAW;AAAA,cACT,UAAU,IAAI,EAAE;AAAA,cAChB,EAAE,GAAG,IAAI,GAAG,GAAG,GAAG,GAAG,GAAG,GAAG,GAAG,GAAG,GAAG,EAAE;AAAA;AAAA,cACtC,UAAU,CAAC,IAAI,CAAC,EAAE;AAAA,YACpB;AACA,uBAAW,CAAC;AAAA,UACd;AAGA,cAAI,UAAU;AACZ,kBAAM,MAAO,WAAW,KAAK,KAAM;AACnC,uBAAW;AAAA,cACT,UAAU,IAAI,EAAE;AAAA;AAAA,cAChB,OAAO,GAAG;AAAA;AAAA,cACV,UAAU,CAAC,IAAI,CAAC,EAAE;AAAA;AAAA,YACpB;AAAA,UACF;AAGA,qBAAW,QAAQ,QAAQ,KAAK,YAAY,GAAG;AAC7C,gBAAI,SAAS,KAAK;AAChB,2BAAa,aAAa;AAC1B;AAAA,YACF;AAEA,kBAAM,cAAc,aAAa,IAAI,KAAK,CAAC;AAC3C,uBAAW,QAAQ,aAAa;AAC9B,oBAAM,KAAK,YAAY,KAAK,KAAK;AACjC,oBAAM,KAAK,YAAY,KAAK,KAAK;AACjC,oBAAM,KAAK,YAAY,KAAK,KAAK;AACjC,oBAAM,KAAK,YAAY,KAAK,KAAK;AAGjC,kBAAI,KAAK,EAAE,GAAG,IAAI,GAAG,GAAG;AACxB,kBAAI,KAAK,EAAE,GAAG,IAAI,GAAG,GAAG;AAExB,kBAAI,WAAW,SAAS,GAAG;AACzB,sBAAM,kBAAkB,QAAQ,GAAG,UAAU;AAC7C,qBAAK,aAAa,iBAAiB,EAAE;AACrC,qBAAK,aAAa,iBAAiB,EAAE;AAAA,cACvC;AAEA,qBAAO,IAAI,kBAAkB,EAAE,GAAG,GAAG,GAAG,GAAG,IAAI,GAAG,CAAC,EAAE,CAAC;AACtD,qBAAO,IAAI,kBAAkB,EAAE,GAAG,GAAG,GAAG,GAAG,IAAI,GAAG,CAAC,EAAE,CAAC;AAAA,YACxD;AAEA,yBAAa,WAAW;AAAA,UAC1B;AACA,iBAAO,KAAK,GAAG,OAAO,MAAM,CAAC;AAAA,QAC/B;AAAA,MACF,WAAW,QAAQ,SAAS,gBAAgB,QAAQ,UAAU,WAAW;AACvE,YAAI,QAAQ,UAAU,OAAO;AAC3B,qBAAW,UAAU;AAAA,YACnB,QAAQ,mBAAmB,OAAO,QAAQ,CAAC;AAAA,YAC3C,QAAQ,mBAAmB,OAAO,YAAY,CAAC;AAAA,UACjD,GAAG;AACD,kBAAM,iBAAiB,+BAA+B,OAAO;AAC7D,kBAAM,iBAAiB,mBAAmB,QAAQ,cAAc;AAChE,kBAAM,KAAK,cAAc,EAAE,IAAI,mBAAmB;AAAA,cAChD,iBAAiB;AAAA,YACnB,CAAC;AAED,gBAAI,QAAQ,UAAU,kBAAkB,QAAQ,cAAc;AAC5D,iBAAG,IAAI,iBAAiB;AAAA,gBACtB,kBAAkB,QAAQ;AAAA,cAC5B,CAAC;AAAA,YACH;AAEA,eAAG,IAAI,mBAAmB,EAAE,GAAG,QAAQ,GAAG,GAAG,IAAI,QAAQ,CAAC,EAAE,CAAC;AAE7D,gBAAI,QAAQ,UAAU,kBAAkB,QAAQ,cAAc;AAE5D,iBAAG,IAAI,iBAAiB,EAAE,kBAAkB,EAAE,CAAC;AAAA,YACjD;AAEA,mBAAO,KAAK,GAAG,GAAG,MAAM,CAAC;AAAA,UAC3B;AAAA,QACF;AAAA,MACF,WAAW,QAAQ,SAAS,oBAAoB;AAC9C,YAAI,QAAQ,UAAU,OAAO;AAC3B,qBAAW,UAAU,CAAC,QAAQ,mBAAmB,OAAO,OAAO,CAAC,CAAC,GAAG;AAClE,mBAAO;AAAA,cACL,GAAG,cAAc,EACd,IAAI,mBAAmB;AAAA,gBACtB,iBAAiB;AAAA,kBACf;AAAA,kBACA,oCAAoC,OAAO;AAAA,gBAC7C;AAAA,cACF,CAAC,EACA,IAAI,mBAAmB,EAAE,GAAG,QAAQ,GAAG,GAAG,IAAI,QAAQ,CAAC,EAAE,CAAC,EAC1D,MAAM;AAAA,YACX;AAAA,UACF;AAAA,QACF;AAAA,MACF,WAAW,QAAQ,SAAS,mBAAmB;AAC7C,YAAI,QAAQ,OAAO,SAAS,KAAY,GAAG;AACzC,qBAAW,UAAU;AAAA,YACnB,QAAQ,mBAAmB,OAAO,QAAQ,CAAC;AAAA,YAC3C,QAAQ,mBAAmB,OAAO,YAAY,CAAC;AAAA,UACjD,GAAG;AACD,gBAAI,QAAQ,UAAU,QAAQ;AAE5B,oBAAM,uBAAuB;AAAA,gBAC3B,wBAAwB;AAAA,gBACxB,UACE,QAAQ,cAAc,QAAQ,eAC1B,QAAQ,eACR,QAAQ;AAAA,cAChB;AAGA,kBAAI,kBAAkB;AACtB,kBAAI;AACF,kCAAkB;AAAA,kBAChB;AAAA,kBACA;AAAA,gBACF;AAAA,cACF,QAAQ;AACN,kCACE,KAAK;AAAA,kBACH,GAAG,OACA,OAAO,CAAC,QAAQ,qBAAqB,GAAG,EACxC,IAAI,CAAC,QAAS,IAAY,eAAe;AAAA,kBAC5C;AAAA,gBACF,IAAI;AAGN,uBAAO;AAAA,kBACL,GAAG,cAAc,EACd,IAAI,4BAA4B;AAAA,oBAC/B;AAAA,oBACA,GAAG;AAAA,kBACL,CAAC,EACA,MAAM;AAAA,gBACX;AAAA,cACF;AAEA,oBAAM,KAAK,cAAc,EAAE,IAAI,mBAAmB;AAAA,gBAChD;AAAA,cACF,CAAC;AAED,kBAAI,QAAQ,cAAc,QAAQ,cAAc;AAE9C,sBAAM,UAAU,QAAQ,cAAc,QAAQ,gBAAgB;AAC9D,mBAAG,IAAI,mBAAmB;AAAA,kBACxB,GAAG,QAAQ,IAAI;AAAA,kBACf,GAAG,IAAI,QAAQ,CAAC;AAAA,gBAClB,CAAC,EACE,IAAI,kBAAkB;AAAA,kBACrB,GAAG,QAAQ,IAAI;AAAA,kBACf,GAAG,IAAI,QAAQ,CAAC;AAAA,gBAClB,CAAC,EACA,IAAI,kBAAkB;AAAA,kBACrB,GAAG,QAAQ,IAAI;AAAA,kBACf,GAAG,IAAI,QAAQ,CAAC;AAAA,gBAClB,CAAC,EACA,IAAI,mBAAmB;AAAA,kBACtB,GAAG,QAAQ,IAAI;AAAA,kBACf,GAAG,IAAI,QAAQ,CAAC;AAAA,gBAClB,CAAC;AAAA,cACL,OAAO;AAEL,sBAAM,UAAU,QAAQ,eAAe,QAAQ,eAAe;AAC9D,mBAAG,IAAI,mBAAmB;AAAA,kBACxB,GAAG,QAAQ;AAAA,kBACX,GAAG,IAAI,QAAQ,IAAI,MAAM;AAAA,gBAC3B,CAAC,EACE,IAAI,kBAAkB;AAAA,kBACrB,GAAG,QAAQ;AAAA,kBACX,GAAG,IAAI,QAAQ,IAAI,MAAM;AAAA,gBAC3B,CAAC,EACA,IAAI,kBAAkB;AAAA,kBACrB,GAAG,QAAQ;AAAA,kBACX,GAAG,IAAI,QAAQ,IAAI,MAAM;AAAA,gBAC3B,CAAC,EACA,IAAI,mBAAmB;AAAA,kBACtB,GAAG,QAAQ;AAAA,kBACX,GAAG,IAAI,QAAQ,IAAI,MAAM;AAAA,gBAC3B,CAAC;AAAA,cACL;AAEA,qBAAO,KAAK,GAAG,GAAG,MAAM,CAAC;AAAA,YAC3B,OAAO;AACL,oBAAM,iBAAiB,mCAAmC,OAAO;AACjE,qBAAO;AAAA,gBACL,GAAG,cAAc,EACd,IAAI,mBAAmB;AAAA,kBACtB,iBAAiB,mBAAmB,QAAQ,cAAc;AAAA,gBAC5D,CAAC,EACA,IAAI,mBAAmB,EAAE,GAAG,QAAQ,GAAG,GAAG,IAAI,QAAQ,CAAC,EAAE,CAAC,EAC1D,MAAM;AAAA,cACX;AAAA,YACF;AAAA,UACF;AAAA,QACF;AAAA,MACF,WAAW,QAAQ,SAAS,YAAY;AACtC,YAAI,UAAU,WAAW;AACvB,qBAAW,UAAU;AAAA,YACnB,QAAQ,mBAAmB,OAAO,YAAY,CAAC;AAAA,UACjD,GAAG;AACD,gBAAI,QAAQ,eAAe,UAAU;AACnC,sBAAQ;AAAA,gBACN;AAAA,cACF;AACA;AAAA,YACF;AACA,mBAAO;AAAA,cACL,GAAG,cAAc,EACd,IAAI,mBAAmB;AAAA,gBACtB,iBAAiB;AAAA,kBACf;AAAA,kBACA,mCAAmC,OAAO;AAAA,gBAC5C;AAAA,cACF,CAAC,EACA,IAAI,mBAAmB,EAAE,GAAG,QAAQ,GAAG,GAAG,IAAI,QAAQ,CAAC,EAAE,CAAC,EAC1D,MAAM;AAAA,YACX;AAAA,UACF;AAAA,QACF;AAAA,MACF,WAAW,QAAQ,SAAS,WAAW;AACrC,YAAI,QAAQ,OAAO,SAAS,KAAY,GAAG;AACzC,qBAAW,UAAU,CAAC,QAAQ,mBAAmB,OAAO,QAAQ,CAAC,CAAC,GAAG;AACnE,mBAAO;AAAA,cACL,GAAG,cAAc,EACd,IAAI,mBAAmB;AAAA,gBACtB,iBAAiB;AAAA,kBACf;AAAA,kBACA,4BAA4B,OAAO;AAAA,gBACrC;AAAA,cACF,CAAC,EACA,IAAI,mBAAmB,EAAE,GAAG,QAAQ,GAAG,GAAG,IAAI,QAAQ,CAAC,EAAE,CAAC,EAC1D,MAAM;AAAA,YACX;AAAA,UACF;AAAA,QACF;AAAA,MACF,WAAW,QAAQ,SAAS,eAAe,UAAU,WAAW;AAC9D,cAAM,SAAS,QAAQ;AACvB,cAAM,EAAE,OAAO,QAAQ,QAAQ,QAAQ,IAAI;AAC3C,cAAM,cAAc,cAAc,EAAE,IAAI,mBAAmB;AAAA,UACzD,iBAAiB;AAAA,QACnB,CAAC;AACD,YAAI,WAAW,QAAQ,SAAS,GAAG;AACjC,sBAAY,IAAI,kBAAkB,QAAQ,CAAC,CAAC;AAC5C,mBAAS,IAAI,GAAG,IAAI,QAAQ,QAAQ,KAAK;AACvC,wBAAY,IAAI,kBAAkB,QAAQ,CAAC,CAAC;AAAA,UAC9C;AAAA,QACF,OAAO;AACL,sBACG,IAAI,kBAAkB;AAAA,YACrB,GAAG,OAAO,IAAI,QAAQ;AAAA,YACtB,GAAG,IAAI,OAAO,IAAI,SAAS,CAAC;AAAA,UAC9B,CAAC,EACA,IAAI,kBAAkB;AAAA,YACrB,GAAG,OAAO,IAAI,QAAQ;AAAA,YACtB,GAAG,IAAI,OAAO,IAAI,SAAS,CAAC;AAAA,UAC9B,CAAC,EAKA,IAAI,kBAAkB;AAAA,YACrB,GAAG,OAAO,IAAI,QAAQ;AAAA,YACtB,GAAG,IAAI,OAAO,IAAI,SAAS,CAAC;AAAA,UAC9B,CAAC,EAKA,IAAI,kBAAkB;AAAA,YACrB,GAAG,OAAO,IAAI,QAAQ;AAAA,YACtB,GAAG,IAAI,OAAO,IAAI,SAAS,CAAC;AAAA,UAC9B,CAAC,EAKA,IAAI,kBAAkB;AAAA,YACrB,GAAG,OAAO,IAAI,QAAQ;AAAA,YACtB,GAAG,IAAI,OAAO,IAAI,SAAS,CAAC;AAAA,UAC9B,CAAC;AAAA,QACL;AAEA,eAAO,KAAK,GAAG,YAAY,MAAM,CAAC;AAAA,MACpC,WAAW,QAAQ,SAAS,cAAc;AACxC,YAAI,UAAU,WAAW;AACvB,gBAAM,WAAW,QAAQ;AACzB,gBAAM,iBAAiB,cAAc,EAAE,IAAI,mBAAmB;AAAA,YAC5D,iBAAiB;AAAA,UACnB,CAAC;AAED,gBAAM,KAAK;AAEX,cAAI,GAAG,UAAU,QAAQ;AACvB,kBAAM,EAAE,QAAQ,OAAO,QAAQ,SAAS,IAAI;AAC5C,kBAAM,IAAI,QAAQ;AAClB,kBAAM,IAAI,SAAS;AAEnB,kBAAM,SAAS;AAAA,cACb,EAAE,GAAG,CAAC,GAAG,GAAG,EAAE;AAAA;AAAA,cACd,EAAE,GAAG,GAAG,GAAG,EAAE;AAAA;AAAA,cACb,EAAE,GAAG,GAAG,GAAG,CAAC,EAAE;AAAA;AAAA,cACd,EAAE,GAAG,CAAC,GAAG,GAAG,CAAC,EAAE;AAAA;AAAA,YACjB;AAEA,gBAAI,kBAAkB,SAAS;AAC/B,gBAAI,UAAU;AACZ,oBAAM,YAAa,WAAW,KAAK,KAAM;AACzC,gCAAkB,OAAO,SAAS;AAAA,YACpC;AACA,8BAAkB;AAAA,cAChB,UAAU,OAAO,GAAG,OAAO,CAAC;AAAA,cAC5B;AAAA,YACF;AAEA,kBAAM,oBAAoB,OAAO;AAAA,cAAI,CAAC,MACpC,aAAa,iBAAiB,CAAC;AAAA,YACjC;AAEA,2BAAe,IAAI,kBAAkB;AAAA,cACnC,GAAG,kBAAkB,CAAC,EAAE;AAAA,cACxB,GAAG,IAAI,kBAAkB,CAAC,EAAE,CAAC;AAAA,YAC/B,CAAC;AACD,qBAAS,IAAI,GAAG,IAAI,kBAAkB,QAAQ,KAAK;AACjD,6BAAe,IAAI,kBAAkB;AAAA,gBACnC,GAAG,kBAAkB,CAAC,EAAE;AAAA,gBACxB,GAAG,IAAI,kBAAkB,CAAC,EAAE,CAAC;AAAA,cAC/B,CAAC;AAAA,YACH;AACA,2BAAe,IAAI,kBAAkB;AAAA,cACnC,GAAG,kBAAkB,CAAC,EAAE;AAAA,cACxB,GAAG,IAAI,kBAAkB,CAAC,EAAE,CAAC;AAAA,YAC/B,CAAC;AAAA,UACH,WAAW,GAAG,UAAU,UAAU;AAChC,kBAAM,EAAE,QAAQ,OAAO,IAAI;AAC3B,kBAAM,cAAc;AACpB,kBAAM,YAAa,IAAI,KAAK,KAAM;AAClC,kBAAM,SAA0C,CAAC;AAEjD,qBAAS,IAAI,GAAG,IAAI,aAAa,KAAK;AACpC,qBAAO,KAAK;AAAA,gBACV,GAAG,OAAO,IAAI,SAAS,KAAK,IAAI,IAAI,SAAS;AAAA,gBAC7C,GAAG,OAAO,IAAI,SAAS,KAAK,IAAI,IAAI,SAAS;AAAA,cAC/C,CAAC;AAAA,YACH;AAEA,2BAAe,IAAI,kBAAkB;AAAA,cACnC,GAAG,OAAO,CAAC,EAAE;AAAA,cACb,GAAG,IAAI,OAAO,CAAC,EAAE,CAAC;AAAA,YACpB,CAAC;AACD,qBAAS,IAAI,GAAG,IAAI,OAAO,QAAQ,KAAK;AACtC,6BAAe,IAAI,kBAAkB;AAAA,gBACnC,GAAG,OAAO,CAAC,EAAE;AAAA,gBACb,GAAG,IAAI,OAAO,CAAC,EAAE,CAAC;AAAA,cACpB,CAAC;AAAA,YACH;AACA,2BAAe,IAAI,kBAAkB;AAAA,cACnC,GAAG,OAAO,CAAC,EAAE;AAAA,cACb,GAAG,IAAI,OAAO,CAAC,EAAE,CAAC;AAAA,YACpB,CAAC;AAAA,UACH,WAAW,GAAG,UAAU,WAAW;AACjC,kBAAM,EAAE,OAAO,IAAI;AACnB,gBAAI,OAAO,SAAS,GAAG;AACrB,6BAAe,IAAI,kBAAkB;AAAA,gBACnC,GAAG,OAAO,CAAC,EAAE;AAAA,gBACb,GAAG,IAAI,OAAO,CAAC,EAAE,CAAC;AAAA,cACpB,CAAC;AACD,uBAAS,IAAI,GAAG,IAAI,OAAO,QAAQ,KAAK;AACtC,+BAAe,IAAI,kBAAkB;AAAA,kBACnC,GAAG,OAAO,CAAC,EAAE;AAAA,kBACb,GAAG,IAAI,OAAO,CAAC,EAAE,CAAC;AAAA,gBACpB,CAAC;AAAA,cACH;AACA,6BAAe,IAAI,kBAAkB;AAAA,gBACnC,GAAG,OAAO,CAAC,EAAE;AAAA,gBACb,GAAG,IAAI,OAAO,CAAC,EAAE,CAAC;AAAA,cACpB,CAAC;AAAA,YACH;AAAA,UACF;AACA,mBAAS,KAAK,GAAG,eAAe,MAAM,CAAC;AAAA,QACzC;AAAA,MACF;AAAA,IACF;AAAA,EACF;AAEA,aAAW,OAAO,OAAO,KAAK,OAAO,GAAG;AACtC,YAAQ,GAAqC,EAAE;AAAA,MAC7C,GAAG,cAAc,EAAE,IAAI,eAAe,CAAC,CAAC,EAAE,MAAM;AAAA,IAClD;AAAA,EACF;AAEA,SAAO;AACT;","names":["z","z","z","z","z","z","z","z","z","z","z","z","z","z","z","z","z","z","z","z","z","z","z","z","z","z","z","z","z","z","z","z","z","z","z","z","z","z","z","z","z","z","z","z","z","z","z","z","z","z","z","z","z","z","z","z","z","z","z","z","z","z","z","z","z","z","z","z","z","z","z","z","z","z","z","z","z","z","z","z","z","z","z","z","z","z","z","z","z","z"]}