charness 3.3.2 → 3.4.0

package/CHANGELOG.md

@@ -0,0 +1,612 @@
+# Changelog
+
+## Unreleased
+
+## 3.4.0 — 2026-10-23
+
+**Charness now updates itself.** Every hour the bot checks for a new version; when nobody is using it — no agent working,
+no input waiting, nobody has written for 10 minutes — it installs it and restarts in place, the same process, so every agent
+keeps running, and General gets «Updated a → b» with what the new version brought. An npm install takes a version 4 hours
+after it appeared; a git checkout takes a pull (in hot mode the supervisor re-executes itself when one of its own files
+changed — in Docker the entrypoint sees no exit); a major version, a version that needs a newer Node or a checkout range
+that adds a migration guide is offered with a button instead of installed, and a version that does not start is rolled
+back. `/update` in General switches it between Automatic (the default), Notify only and Off, switches the «what's new»
+list and shows what the last check saw; `/version` says when an update is available.
+
+**`/topic` opens another topic on a folder.** `/topic` asks for the new topic's name (`/topic <name>` takes it from the
+command), then for the folder: the one this topic is bound to («as here») or another one from the same picker as `/bind`,
+«create new folder» included — in General and in an unbound topic the picker comes first. The bot creates the topic, binds
+it, greets it as `/bind` does and answers with an «Open topic →» button; no agent starts by itself. The bot needs the
+`can_manage_topics` right (without it the usual hint is shown), «✖️ Cancel» (on the folder question and in the picker) and
+`/esc` (at any step) end it, and in the bot's private chat, which has no topics, the command says so.
+
+**`/interrupt` stops a running OpenCode turn.** `/esc` answered «Not supported for OpenCode», so an OpenCode topic had
+no way to stop the agent and redirect it. `/interrupt` (the new name of `/esc` — both work, and `/interrupt` is in the
+command menu) aborts the generation, cancels a question the agent was waiting on, and leaves the conversation as it
+is: the next message steers the agent. On the Claude
+stream-json backends `/esc` now also declines a question the agent is waiting on (it used to leave it open under the
+aborted turn). Stopping a turn before the agent had written anything (also with `/c`) is no longer taken for a stuck
+session, whose "recovery" ran the request again.
+
+## 3.3.2 — 2026-10-23
+
+**On Windows the bot can start an `opencode` that npm installed.** 3.3.0 found npm's `opencode.cmd` on PATH but still
+started the bare `opencode`, which Windows cannot run that way, so the OpenCode server did not come up. The bot now runs
+the script npm's shim wraps (another batch file through `cmd.exe`), and installing a missing CLI works on Windows too.
+
+**A Claude CLI that dies as it starts is reported as a failed start.** The topic used to be told the session was
+«ready», then that it «ended» — once per attempt — after waiting out a 15-second handshake each time. It now gets one
+line with the CLI's own error, at once.
+
+**When the agent cannot be started again for a message, the topic gets one line saying why.** A message or a button tap
+that had to wake a sleeping conversation added «No agent running» under the start's own reason. And a re-asked
+question's buttons stopped working when its answer reached no session — they keep working now.
+
+**Gemini's «Requests ending with a model turn are not supported» recovers even right after another retry.** It was
+counted as a repeat of any retry in the two minutes before — Google's short «reset after 2s» retry, for one — and the
+bot gave up without continuing the work. Each kind of retry still stops at its own limit when they alternate.
+
+**A `/compact` that fails the way the turn before it did is shown.** The failure was taken for the previous turn's,
+already posted, and dropped: neither shown nor retried.
+
+**A daily quota's «retry your request in 30s» keeps the usual usage-limit wait.** Only a retry hint placed right after
+«retry» was recognised; with a few words in between, the bot waited 30 seconds and marked the model limited for that long.
+
+**The give-up line reads right for one attempt.** «Couldn't resume after 1 attempts» is now «Couldn't resume (attempts:
+1)», in every language.
+
+## 3.3.1 — 2026-10-23
+
+**The npm listing names the `charness` command again.** The 3.3.0 listing on npm showed no commands (installs
+and `npx` still worked, the package itself carried them).
+
+## 3.3.0 — 2026-10-23
+
+**A usage limit waits until the exact reset when the provider sends one, instead of a guessed hour.** Claude reports the
+reset of the window that refused the request, but the bot read it only from the message text. A wording that names no
+time, such as «This request would exceed your account's rate limit», fell back to a retry every hour once the limit was
+confirmed. On the default Claude backend the wait now ends at the reset Claude reported. A ChatGPT subscription limit on
+OpenCode now waits until the reset in the provider's response (`resets_at`, or `resets_in_seconds`), not the hourly retry.
+An older Claude Code's `Claude AI usage limit reached|<epoch>` is read the same way.
+
+**The agent can send files to the topic on Windows and macOS.** `send_file_to_user`, and `send_messages_to_user` with a
+file, refused with «secure file sending is unsupported on win32», and an agent could stop its work over it. Files are now
+opened by their checked path on those systems, held to the file that was checked inside the bound folder, so a path
+swapped meanwhile still cannot reach outside it. If a send does fail, the agent is told to give the file's path in its
+reply and carry on.
+
+**On Windows the bot finds the agent CLI installed on PATH.** It looked the tool up with `which`, which Windows lacks,
+so an installed `opencode` read as missing.
+
+**Gemini's «Requests ending with a model turn are not supported» on OpenCode recovers by itself.** OpenCode v1 sometimes
+sends Gemini a conversation that ends on the model's own turn, and the turn stopped with the provider's raw text. The
+topic now gets one short line and the bot continues the work at once; if the same refusal comes right back, it says it
+could not resume, as for other errors.
+
+**An OpenCode failure is posted once, without an auth plugin's debug block.** OpenCode reports most failures twice, and
+both were posted, each as the provider's whole message cut at 500 characters — with opencode-antigravity-auth that
+included a «[Debug Info]» block naming your Google project. One line is posted now, and the block stays in the bot log.
+A sub-agent's failed step is posted once too: only its session error shows.
+
+**Google's «You have exhausted your capacity on this model. Your quota will reset after …» is read by its duration.** The
+Gemini subscription and Antigravity quotas say this both for a cap that clears in seconds («after 2s») and for a spent plan
+(«after 146h52m11s»). The seconds-long one was announced as «🚧 Usage limit reached» with an hour's wait, and an hours-long
+one inside Google's RESOURCE_EXHAUSTED was retried a few times and given up. A reset within a few minutes is now a short
+retry; a longer one is waited for until the time it names. A daily quota keeps the usual hour-long wait: the short
+«Please retry in 40s» Google sends beside it is a retry hint, not the time the quota resets.
+
+**A voice message no longer fails when two starts of the local speech engine meet.** When the bot restarted while the
+local engine was loading, the second start finds the first one running and steps aside — on a busy machine that was taken
+for a failed start, and the voice was not transcribed by the local engine.
+
+**A reset time written without a time zone is no longer guessed.** An ISO stamp with no zone («resets at 2026-10-22
+23:29») was read in the bot's own zone — hours off when the provider meant another. It now counts only with a zone after it;
+otherwise the reset is treated as unknown and the topic retries hourly (or as the provider's Retry-After says).
+
+**A reset written in several parts («reset in 2 hours 30 minutes») is read whole.** Only the first part was read, so
+the topic resumed half an hour early (OpenCode Go writes its limits that way, «in 1 day 3 hours» too), hit the limit
+again and used up a retry.
+
+**Anthropic's «This request would exceed your account's rate limit» is checked before the topic waits for the reset.** The
+same refusal also comes while the account shows plenty of room, and the bot took it for an exhausted window: «🚧 Usage limit
+reached — will auto-resume after reset» and hours of waiting. It now retries once after two minutes, and waits for the reset
+only when the refusal comes again right after that retry — or when the account's usage shows a window at 100 %.
+
+**A sub-agent's limit, or another session's in the same folder, no longer stops the topic.** On OpenCode a sub-agent runs
+in a child session — often on another model or provider — and the folder's events can also carry a session the topic does
+not own (your own `opencode` in the same folder, an old session still retrying). Their quota errors were taken for the
+topic's: «🚧 Usage limit reached», the topic's messages held and its model marked limited while its own agent kept working.
+Only the topic's own session can arm a limit wait now.
+
+**An OpenCode error's response headers no longer turn it into a usage limit, or set its reset.** The bot read the whole
+error OpenCode relays, response headers included, and headers name limits and resets of their own: a plain 400 could be
+announced as «🚧 Usage limit reached», and a real limit could be given the reset of a per-minute counter (or a stamp a day
+away). Now only what the provider said — its message, its response body, the status code — is read, and a reset that the
+message does not name comes from the provider's Retry-After.
+
+**A per-minute provider throttle is no longer announced as an exhausted usage limit.** Google answers a used-up
+PER-MINUTE Gemini quota with the same «You exceeded your current quota … Please retry in 40s» / «Resource has been
+exhausted» as a per-day one, and a concurrency or tokens-per-minute cap reads «exceeded your rate limit» / «limit
+exceeded». The bot took all of them for a usage limit: «🚧 Usage limit reached» and a wait of an hour or more for a
+limit that cleared in seconds. They are now retried within minutes; a quota that names a day, a week or a month — and
+the explicit usage windows — still waits for its reset.
+
+**Two requests opened in the same instant keep their order.** When two people wrote to a topic within the same
+millisecond, the bot could take the older request for the newer one — and answer or remind the wrong person first.
+
+**«⏭ Skip once» and a given-up limit wait stay settled across a bot restart.** When a Claude topic's limit wait ended
+without its resume — skipped, given up, or taken over — the next restart (hot mode restarts on every update) found the
+same limit error at the end of the agent's log and armed the wait again: the «usage limit reached» notice came back and the
+topic was resumed after all. Such a wait is now remembered as handled; a new limit error later is still picked up.
+
+**A weekly usage limit waits for its reset date instead of retrying every hour.** A limit more than a day away is written
+with its date — «You've hit your weekly limit · resets Oct 25, 3pm» — which the bot could not read: it resumed the topic into
+the limit every hour, and after six tries gave up with «Couldn't resume». It now waits for that date and time (in the zone
+the message names) and resumes once.
+
+**A usage-limit reset written with its time zone is read in that zone.** Claude Code names the zone it wrote the reset in
+— «You've hit your session limit · resets 2:10pm (Europe/Moscow)» — and the bot read the clock in its own zone instead: when
+the two differ, the topic resumed too early (and hit the limit again) or waited hours too long. Daylight saving is the named
+zone's own.
+
+**A usage warning is no longer announced as an exhausted limit.** Claude Code warns before a limit is reached —
+«Approaching session limit · resets 11:29pm», «You've used 90% of your weekly limit · resets …», and «… continuing with usage
+credits» / «Now using extra usage» once paid extra usage takes over. On a topic running Claude in tmux mode the bot read the
+warning as the limit itself: it posted «🚧 Usage limit reached — will auto-resume after reset (~<time>)» while the account still
+had room, and the work waited for the reset. Only the real block («You've hit your session limit · resets …») stops a topic now.
+
+**After a restart, a limit that had already reset is no longer announced as exhausted until the next day.** When the bot
+came back to a topic still parked on a limit error (`resets 10:50pm`), it read the reset time against the restart instead
+of the error, so a window that had reset at 22:50 became «resumes after reset (~tomorrow 22:50)». The topic now resumes at
+once with the «limit window has reset» line, and no limit notice.
+
+**An OpenCode server that goes down no longer floods the topics with errors and drops their sessions.** When `opencode
+serve` stopped, the bot made one attempt to start it again; if that attempt failed — the binary not found («spawn opencode
+ENOENT»), a slow start — every OpenCode topic got the raw error and lost its session, and a message sent meanwhile failed
+with «fetch failed». A session start or resume that found the server down failed the same way. Now every way of bringing the
+server up installs a missing binary first and retries for about a minute. A restart is silent: the sessions are restored,
+only a topic whose reply was in progress is told it was lost, and a message sent during the restart is delivered once the
+server is back. Only if every attempt fails does a topic get one short line, in its language, saying the next message will
+try again — and that next message no longer claims the conversation was lost and starts a new one. A binary that only lives
+in `~/.npm-global/bin` is no longer reinstalled on every start.
+
+**A conversation whose transcript Claude Code's cleanup removed no longer kills the topic's agent.** Claude Code deletes
+the transcripts of old conversations; a running agent that is stopped after that writes only a metadata stub back, which the
+CLI refuses to resume («No conversation found»). The bot took the stub for a conversation: a change of account, model or
+effort ended with an error in the topic and a dead agent, and the next message failed the same way. A transcript is now
+resumed only when it holds messages. A topic whose conversation is gone gets one line saying so and a fresh session — on its
+next message, and also when an account, model or effort change re-spawned its running agent onto the lost conversation (it
+starts again under the same id; the agent has forgotten the earlier context, which the line says). The same goes for a sleeping
+conversation whose transcript the cleanup removed entirely (no agent was running to leave a stub): the bot remembers that
+it took turns. A session that never took a turn has no transcript and nothing to lose: it wakes silently. A re-spawn waits
+up to 5 s for the old process to exit and kills it if it will not, so two agents never run on one conversation.
+
+**The `/limits` board showed the old ✓ after a slow default change.** Changing the default Claude account from General
+re-spawns every running topic that follows it, which can take about half a minute; Telegram had stopped waiting for the
+tap by then, the pop-up was refused, and the board was never redrawn until the next `/limits`. The board (and `/accounts`,
+the model pages, `/limits_autoswitch` — the limit notice's «Switch to …» button included — and the `/model` and `/effort` pickers)
+now always finish what the tap does, and a confirmation whose pop-up could not be shown is posted as a message.
+
+**`/limits` is a switch board: every account and provider with its usage, one tap to move the topic.** The message opens
+with `Usage (% used)` and a line per signed-in Claude account in the `/accounts` wording — `default — ⏱ 5h 14% 🔄 in 3h · week 3%
+🔄 in 6d`, `⛔ at its limit until Sun 01:00` while limited — and the ChatGPT subscription's windows after them (`openai (ChatGPT) — ⏱ 5h …`),
+then the automatic-switching state and the caption «Choose the active model:». Below it every signed-in Claude account and each connected
+OpenCode provider is one button with its name only — `✓ Claude · work`, `Claude · default`, `OpenCode · openai` (the figures do not fit a
+phone's button) — and a tap switches this topic: another
+account (model and conversation kept), an OpenCode provider (its model page opens; the same OpenCode session just changes the
+model), the ✓ row (change the model of where the topic runs). Across backends with a conversation to hand over it asks first;
+while a usage-limit wait is armed the tap is the limit move (on the limited Claude account a model the limit does not cover — `opus` under a Fable-only weekly limit — continues the work too). The usage-limit notice now ends «The limit resets <time>.
+Switch: /limits». In General a Claude row sets the default account.
+
+**Fable is judged on all three of its windows.** The session window and the shared weekly «all models» window bound every
+model, Fable included; Fable additionally drains its own weekly window. The `claude_profiles` recommendation (MCP tool and
+`charness claude-profiles`), the fallback chain's availability and the account ranking on a limit used to look at Fable's own
+window and the session window only, so an account with its shared weekly window exhausted could still be recommended for Fable.
+
+**The fallback setup is its own screen, `/limits_autoswitch`.** The ordered fallback list, «🔁 Auto switch» and «⏳ Wait for
+reset» moved there from the old `/limits` (minus the usage block); its rows now read `✓ 1. Claude · work · opus` /
+`3. OpenCode · openai · gpt-5`. `/limits rebuild|clear|switch|wait …`, `/fallback` and `/auto_continue_limits` keep working.
+
+**`/accounts` tells the truth about OpenCode.** Its title and ✓ say where the topic really runs (`OpenCode openai/gpt-5`),
+an OpenCode provider row switches the topic to that provider through the model page (`/accounts use <provider>/<model>` is
+the typed form), and a provider signed in with a ChatGPT subscription shows its ~5 h / ~7 d usage windows like a Claude account.
+
+**A default reasoning effort for the whole instance: `/effort` in General.** New sessions no longer start on `xhigh`
+in every topic that never picked a level: the default is `medium`, and the General topic's `/effort` sets it for all
+topics at once (saved in `settings.json`, see [SETUP.md § Instance settings](SETUP.md#instance-settings-settingsjson)).
+A topic's own `/effort` pick still wins, and «As in General» in a topic gives it up again.
+
+**Voice recognition: one settings file, `/stt`, and a recogniser that runs on your machine.** The speech engines
+(Groq, OpenAI, any OpenAI-compatible server, and the local GigaAM v3) are an ordered list in `stt.json`, edited from
+`/stt` or by hand. Details: [SETUP.md § Voice input](SETUP.md#voice-input).
+
+**A shorter notice when a usage limit moves a topic to another account or model.** One line now says which account
+(or OpenCode model) hit its limit, where the topic continues — its model only when the switch changes it — when the
+limit resets, and `/limits` to switch, instead of repeating every label and listing four commands.
+
+**Switching a topic between Claude and OpenCode by hand now asks first, and a Claude account tapped in `/accounts` on an
+OpenCode topic really switches.** `/claude`, `/opencode` (and the agent buttons / «start …» phrases) on a topic that
+runs the other backend, and a Claude account picked in `/accounts` (`/accounts use <name>`) on an OpenCode topic —
+which only recorded the pick before — ask «Switch this topic from OpenCode to Claude «work»? The conversation context
+will be handed over in compacted form.» with ✅ Continue / ✖️ Cancel when there is a conversation to hand over; Continue
+moves the topic the way a usage limit does (the other backend's parked conversation is resumed, the context bridge is the
+first prompt), Cancel changes nothing, and a topic with nothing to hand over switches at once. `/limits_autoswitch` asks
+the same way before a rung of a backend the list does not use yet is added or included again.
+
+**An answer tapped on a re-asked question no longer gets lost.** The idle compaction posts the re-asked question just
+before it stops the agent's process; a tap while that process was being stopped went to it and vanished. Such a tap is
+now held and reaches the agent once the conversation is resumed, like a message typed at that moment. A tap or a message
+that came a moment before the stop began, and was still on its way to the agent when it started, is held or wakes the
+conversation the same way.
+
+### Upgrading
+- **`/limits` is a different screen now.** The fallback list and the two settings are in `/limits_autoswitch`; `/limits`
+  is the switch board. Old buttons on an old `/limits` message keep working and re-render that message as
+  `/limits_autoswitch`; the text forms (`/limits rebuild`, `/limits switch on`, …) keep working too. A bot menu entry for
+  `/limits_autoswitch` is added at the next start.
+- **A new outgoing request.** When OpenCode holds a ChatGPT subscription login for the `openai` provider, the bot reads
+  its usage windows with the stored token from `https://chatgpt.com/backend-api/wham/usage` (every 10 minutes and when
+  `/limits` or `/accounts` opens). The token is never refreshed or logged; an API-key provider triggers no request.
+- **The default effort is `medium` now (it was `xhigh`).** Topics with no `/effort` pick of their own start their next
+  session on `medium`; running sessions keep their level. To get the old behaviour back, pick `xhigh` in General's
+  `/effort` (or write `{ "defaultEffort": "xhigh" }` into `settings.json` beside your env file).
+- **`GROQ_API_KEY` / `OPENAI_API_KEY` move out of the env file.** At the first start without a `stt.json` the bot
+  copies them into it (Groq first) and logs a `[deprecated]` line; from then on the env keys are ignored. Use `/stt`
+  or edit `stt.json`, and delete the keys from the env file when convenient.
+- **`stt.json` lives beside your real env file** (a symlinked `.env` is resolved: it goes next to the target). That
+  directory must be writable and survive restarts.
+- **Docker: mount the config DIRECTORY, not only the env file.** `examples/docker-compose.yml` now takes
+  `INSTANCE_CONFIG_DIR` (the directory that holds the env file) in place of `INSTANCE_ENV_FILE`: move the env file into
+  a directory of its own, e.g. `/srv/charness/config/instance.env`, mount that directory writable and point `ENV_FILE`
+  at the file inside it (`docker run` form: SETUP.md § Run with Docker). With the old single-file mount `stt.json` lands
+  on the container's own disk: it is lost whenever the container is re-created, and the old keys are copied in again each
+  time. The bot warns at boot when it runs in a container and `stt.json` is not on a mount (`[STT] … is on this
+  container's own disk`), and when the directory cannot be written at all. The local engine itself is not available in
+  the Docker image yet (no `python3-venv`).
+
+### Added
+- **`/effort` in General** sets the instance default; **`/effort` in a topic** shows where its level comes from and
+  offers «As in General». `/status`, the ready notice and the pinned banner show the level a topic's session really runs —
+  after a General change a running session keeps its level, shown as «xhigh (medium from the next start)». OpenCode
+  rounds General's value to the model's variants (`ultracode` = its highest, `auto` = no variant).
+  The default lives in `settings.json` (beside `stt.json`), hand-editable without a restart.
+- **`/stt`**: the main screen is the engine list, «➕ Add engine» and the language; each engine has a card (order, use /
+  don't use, timeout, and a key for the hosted ones); Groq, OpenAI and a custom server are added through «➕ Add engine».
+  A pasted key or an address with a login is deleted from the topic at once and kept out of the logs and the output trace.
+- **Local recognition (GigaAM v3, Russian):** a recogniser process that starts with the first voice that needs it,
+  survives hot reloads, stops after idle time and with its owner, and falls back to the next engine on any failure.
+  It is added through «➕ Add engine» like any other (a confirmation and a live install progress when the model is not
+  installed), and everything local-specific — status, idle exit, workers, try again after failed starts, remove from list,
+  remove the model files — is on its own card, not on the main screen; the cloud engines' cards show only the common
+  controls and their key or address. Memory: about 0.5 GB while it runs, up to about 0.9 GB on a long voice.
+
+### Fixed
+- A voice note whose Telegram `duration` is 0 (a sender that gave no length) is treated as of unknown length, not as a
+  0-second voice: it gets the same time budget as a voice without a length, so a long one no longer falls back to the
+  next engine at the bare base timeout.
+- Going from Claude to OpenCode and back (`/opencode` then `/claude`, a usage-limit switch to an OpenCode model and back) resumes
+  the Claude conversation the topic left; it used to come back to a fresh one, because leaving OpenCode overwrote the
+  parked Claude conversation id with the OpenCode session's. The same holds the other way round.
+- A Claude json-stream session re-attached after a bot restart keeps its model (a `/model` pick, or Jira's configured
+  one) when it is re-spawned for an effort or account change; it used to restart on Claude's default model.
+- An OpenCode model that has no effort levels shows none: `/status`, the pinned banner and the ready notice no longer
+  name General's default for a session that runs without any level (`/effort` already said «not available»).
+
+## 3.2.0 — 2026-10-16
+
+**Renamed: what was left under the TelegramCode name is now Charness.** The old names still work and each one
+in use prints a `[deprecated]` line at start — rename them when you see it. Steps for an npm install, a source
+checkout with self-update and Docker: [MIGRATION_RENAME_TO_CHARNESS.md](MIGRATION_RENAME_TO_CHARNESS.md).
+
+### Breaking / renamed
+- **`charness` is the command in every message, help text and document.** `telegramcode` and `telegramCode`
+  stay as aliases.
+- **Global config: `~/.config/charness/.env`** (was `~/.config/telegramcode/.env`; the older
+  `~/.config/telegram-code` too). Moved by the automatic migration below; by hand:
+  `mv ~/.config/telegramcode ~/.config/charness`.
+- **Default data dir: `~/.charness`** (was `~/.telegramCode`). An existing `~/.telegramCode` is kept while
+  `~/.charness` does not exist; an explicit `DATA_DIR` is untouched. Moved by the automatic migration below; by
+  hand, with the bot stopped and no agent running — or set `DATA_DIR` to the old path to keep it.
+- **Hot-mode variables: `CHARNESS_HOT_RELOAD`, `CHARNESS_OPENCODE_PROCESS_FILE`** (were `TELEGRAMCODE_HOT_RELOAD`,
+  `TELEGRAMCODE_OPENCODE_PROCESS_FILE`). The supervisor sets both; restart `charness hot` once after the update.
+- **MCP client-id header: `x-charness-mcp-client-id`** (was `x-telegramcode-mcp-client-id`); the server accepts
+  both.
+- **OpenCode compaction plugin: `charness-compaction.js`** (was `telegramcode-compaction.js`); the old file is
+  removed when the new one is installed.
+- **Docker: image, service and container `charness`, `charness-main`**; mounts `/opt/charness`,
+  `/home/charness`; restart command `charness-restart-bot`; compose variables `CHARNESS_DATA_DIR`,
+  `CHARNESS_WORK_ROOT`. A running container of the old image is not affected; the new entrypoint accepts the old
+  mount points and `telegramcode-restart-bot` still works.
+
+### Added
+- **Automatic migration at a cold start.** The bot moves `~/.config/telegramcode` (or the older
+  `~/.config/telegram-code`) to `~/.config/charness` and the default `~/.telegramCode` to `~/.charness`, leaves a
+  relative symlink at each old path (running agents and scripts keep working), renames `TELEGRAMCODE_*` keys to
+  `CHARNESS_*` in the config file it moved (the original kept as `.env.bak`) and logs one `[migrate]` line per
+  action. It runs under the instance lock before the state is loaded, only on the plain start and the hot
+  supervisor's start (never on a worker reload), never for an explicit `DATA_DIR` or an `ENV_FILE` instance,
+  and is idempotent. Details: [MIGRATION_RENAME_TO_CHARNESS.md](MIGRATION_RENAME_TO_CHARNESS.md#automatic-migration).
+- `scripts/self-update.sh` names a newly added `MIGRATION_*.md` in its log.
+- **Jira: an @-mention of the AI account in a comment wakes it to answer**, without the issue being handed over:
+  it reads and checks, changes nothing, and its answer is a comment. On with a `trustedGroup` (only a trusted
+  author and last editor count); `wakeOnMention: false` turns it off. See SETUP.md § Jira.
+- **Jira: an answer notifies the person it is for** — it @-mentions the requester of a mention and the authors
+  of the comments it replies to.
+- **Answers are written briefly, in plain words, for a manager or QA** — on Jira issues and in Telegram topics
+  alike.
+
+### Changed
+- Jira: a hand-over is noticed within 30 s by default (`pollIntervalSeconds` default 30, was 90).
+
+### Fixed
+- Jira: a mention no longer displaces a hand-over without a requester, and a superseded question no longer asks
+  to assign the issue back.
+- A Claude session adopted under the old data-dir path is no longer re-spawned as another account.
+
+## 3.0.0 — 2026-10-07
+
+**Published as `charness`.** The npm package is renamed from `telegramcode` to
+`charness`, after the project. To move over:
+`npm uninstall -g telegramcode && npm install -g charness`. The `telegramcode`
+command, the `~/.config/telegramcode` config, the `~/.telegramCode` data dir and
+the `TELEGRAMCODE_*` variables stay as they were, so an existing setup carries
+over unchanged; `charness` is a new alias of the command.
+
+### Added
+- **Requests and answers.** A message, a voice note or a scheduled run opens a
+  request; the agent answers it with the `answer_request` tool (progress,
+  question or final), and every answer is pinned in the topic (only the latest
+  stays pinned). An agent that ends its turn without answering is woken, and
+  the operator is alerted when waking gives up. A usage-limit stop answers the
+  open request.
+- **`/verbosity` views**: Stream only, Stream + answers, Answers only. In
+  Answers only, an agent that keeps writing after its final answer is reminded
+  to send whatever matters.
+- **Sleeping Claude conversations.** An idle json-stream conversation is
+  compacted and its process stopped; the next message resumes it. A third
+  Claude backend, per-turn, stops the process after every turn.
+- **Compaction**: `/compact` on every agent backend, compaction on idle, the
+  agent's own `compact_conversation` tool, and the summary posted to the topic
+  on request (`/compact_summary`, off by default). Every compaction summary
+  names the skills to load again.
+- **Usage limits**: wait for the reset and resume by itself
+  (`/auto_continue_limits`).
+- **`/reminders`**: reminders the bot posts and pins itself, without an agent.
+- **Watchdog checks**: `schedule_create` with a `checkCommand` runs a check on
+  schedule and wakes the agent on the first failure.
+- **`/timezone`**: one instance-wide time zone for schedules and timestamps.
+- **`/model`**: a two-level picker with pages and per-provider disabling;
+  the model and effort are shown when an agent starts or switches.
+- **OpenCode `/connect`** works with ordinary providers.
+- **Replies**: the replied-to message goes into the agent's prompt, and a
+  replied-to photo, file or voice note is named with the bot's saved copy.
+- **Voice**: transcription is retried after a timeout or a transient error.
+- **`send_messages_to_user`**: each message may carry a file.
+- **Jira Cloud connector** (`CONNECTORS=jira`): an issue assigned to the AI
+  account becomes a request in its own session, and the answers come back as
+  comments.
+- **Docker**: the whole bot runs in one container (`docker/`).
+
+### Fixed
+- Many fixes in output streaming, session restore after a restart, OpenCode
+  event routing and the Claude screen scrape; see the git history.
+
+## Earlier changes, shipped in the 2.0.x packages
+
+### Changed
+- **`WORK_DIR` is no longer fatal.** Launch `telegramcode` from the parent
+  folder containing your projects — that `$PWD` becomes the work root.
+  `WORK_ROOT` is now an advanced override (services / containers where the
+  process cwd can't be controlled); a stray legacy `WORK_DIR` is ignored, not a
+  startup error.
+- **`ALLOWED_GROUP_ID` is now optional.** Leave it empty to auto-pair with the
+  first forum supergroup an admin contacts the bot from; set it only to pin a
+  specific group before first contact.
+- **OpenCode no longer interrupts a running turn for a new prompt.** A prompt
+  sent while OpenCode is busy is queued by `prompt_async` and picked up promptly
+  instead of aborting the live turn (which only lost work). Claude keeps its
+  Escape-and-wait — its TUI ignores typed input mid-turn.
+- **Bot UI language is resolved per Telegram chat.** A `/language` override wins,
+  otherwise the bot uses Telegram `language_code`, then the last seen chat
+  locale, then English; the old global env language knob is removed.
+
+## 2.1.0 — 2026-05-13
+
+**Audit fixes release.** Full repo audit (50 findings across security,
+concurrency, resource handling, error contracts, infra) closed in 20
+focused commits. See `agent/tasks/actual/2026-05-13-audit-fixes.md` for
+the full plan; highlights below.
+
+### Security
+- **Two RCEs closed** in `claudeCliAdapter`: `sendInput` and
+  `startSession`/`resumeSession` built tmux command lines via
+  `execSync` with `JSON.stringify`-interpolated user input, letting any
+  allowed user run arbitrary host commands via `$(…)` / backticks in a
+  thread message. Reroute all tmux calls onto the argv-based helper;
+  single-quote every element of the final `tmux new-session` shell
+  command (S1).
+- **Forum-topic auth bypass** closed: `forum_topic_created` /
+  `_closed` / `_reopened` are now gated on `ALLOWED_USERS`, not just
+  the chat allowlist. A non-allowed admin previously could rename a
+  topic to fuzzy-match a sensitive WORK_ROOT subdir and have the next
+  allowed-user message launch an agent there (S2).
+- **OpenCode SSE cross-thread events**: `permission.asked` and
+  `question.asked` events without `sessionID` used to fan out to every
+  active thread, auto-approving permissions and stacking duplicate
+  questions. Now any event without a `sessionID` is dropped (S5).
+- **SSRF guard** on `OPENCODE_URL` (loopback by default, opt in with
+  `OPENCODE_ALLOW_REMOTE=1`); 30 s timeout on every fetch; abortable
+  SSE reader; 10-minute wall-clock cap on SSE reconnect (S7).
+- **Docker hardening**: drop `user: root`, `cap_drop: [ALL]`,
+  `security_opt: no-new-privileges`, bounded `mem_limit`/`pids_limit`,
+  healthcheck. `.docker-entrypoint.sh` uses `runuser -- "$@"` instead
+  of `su -c "$*"` so argv stays argv. claude-code install moved to
+  build time with a pinned version (S16).
+
+### Bugs
+- `resume_<idx>` callback: full session id is recovered from a
+  per-thread map instead of being truncated into callback_data, which
+  used to make OpenCode resume target a non-existent id (S4).
+- Pinned-banner pipeline serialised per key so concurrent adapter
+  events can't stack duplicate pinned messages (S6).
+- OpenCode lifecycle: per-key serialisation of start/stop, cleanup of
+  `statusDebounceTimer` and `reconnectTimer` on stop, explicit
+  teardown of every session after `restartServer` (S8).
+- Claude adapter: auto-Enter / auto-Accept timers tracked + cleared on
+  stop; `pollOutput` uses self-rescheduling `setTimeout` with
+  re-entrancy guard; `adoptExistingTmuxSession` rejects zombie panes
+  with no live child; capture-pane scrollback raised to 2000 lines (S9).
+- `/clear` snapshots message ids under `state.withLock` so agent
+  messages pushed mid-deletion can't slip out of tracking (S11).
+- `/output` flips `markNeedsNewMessage` and surfaces "+N more chunks
+  omitted" instead of silently dropping (S11).
+- `/new` routes through `applyBinding` so collision warnings reach the
+  new thread (S11).
+- `switchThreadAdapter` clears the previous adapter's stored session id
+  so post-restart reattach doesn't pick the wrong adapter (S12).
+- In-memory per-thread maps GC'd against `state.json` every 60 s so
+  orphan entries from UI-deleted topics don't linger (S13).
+- Numeric model-selection reply unconditionally returns; previously
+  fell through to NL-start + agent-forward when `setModel` was absent
+  (S12).
+- `downloadFile` capped at 5 redirects with 20 s `setTimeout`;
+  `transcribeAudio` got the same timeout and a proper error handler
+  installed before `form.pipe(req)`. Voice file URL now built via
+  `ctx.telegram.getFileLink` so the bot token isn't materialised in a
+  JS string (S14).
+
+### Contracts
+- `AgentAdapter` events documented: `startSession` throws on failure,
+  `error` is for async failures after a successful start, `closed` is
+  unsolicited death, `stopped` is explicit teardown. Claude's two
+  start paths now throw + clean up. `setModel` unified to
+  `Promise<string | null>`. OpenCode SSE giveup emits `closed` so the
+  bot wipes persisted ids (S10).
+
+### Hygiene
+- `tsconfig.json`: `noUnusedLocals`, `noUnusedParameters`,
+  `noFallthroughCasesInSwitch`, `noImplicitOverride`,
+  `exclude: src/__tests__/**`.
+- `package.json`: drop `ts-node`, move `typescript` to devDeps,
+  `private: true`, `engines.node >=22`.
+- `BOT_LANG` lowercased + trimmed with a warn on unknown values.
+- 19 hardcoded English `ctx.answerCbQuery` strings migrated to a new
+  `cb.*` namespace in i18n.
+- `.env.example` no longer leaks the author's home path; the two-
+  instance example uses `REPLACE_ME` so a copy-pasted file fails
+  validation visibly.
+- DATA_DIR resolved via `resolveDataDir()` everywhere; previously the
+  two adapters dropped state files in `$HOME` instead of `DATA_DIR`,
+  breaking two-instance isolation (S3).
+
+### Tests
+- 13 new tests: i18n placeholders + fallback (S19/#50), agent NL
+  trigger parser extracted into `src/agentTrigger.ts` with full ru/en
+  coverage (S19/#25), state.json forward-compat round-trip with an
+  unknown future field. 98 tests passing (R9/R10 still skipped).
+
+### Deferred
+- `noUncheckedIndexedAccess` in `tsconfig.json` (106 errors fallout —
+  needs a careful per-site task).
+- Complete MarkdownV2 escaper (regression risk).
+- bot.ts test coverage (3300 LOC — separate task).
+
+## 2.0.0 — 2026-05-12
+
+**Breaking release.** The bot now routes through a Telegram forum
+supergroup with one topic per task; the 1.x "one bot = one private chat
+= one folder" mode is removed. See [Migration](README.md#migration-from-1x).
+
+### Added
+- **Forum-supergroup routing.** `ThreadKey = (chatId, threadId)` is the
+  routing key everywhere; threads are bound to subfolders of `WORK_ROOT`
+  and run their own `claude` or `opencode` session in parallel.
+- **Persistent state** (`src/state.ts`) — `${DATA_DIR}/state.json` with
+  atomic writes (write tmp → fsync fd → rename → fsync parent dir),
+  per-key async-lock for concurrent `/bind`, corrupted-file archival to
+  `state.json.corrupted-<ts>` with a fresh restart, debounced saves with
+  immediate flush on critical paths.
+- **Restart-safe sessions** — claude tmux sessions named
+  `claude-${chatId}-${threadId}` are re-adopted on boot via
+  `tmux ls`; opencode SSE streams are reopened from persisted
+  `opencodeSessionId`. Orphan tmux sessions are killed.
+- **Per-thread Claude session id** — `crypto.randomUUID()` →
+  `claude --session-id <uuid>` on a fresh start, `--resume <uuid>` on
+  resume. Fixes the 1.x picker hang.
+- **MCP hierarchy** — user (`~/.claude/settings.json`) /
+  group (`${DATA_DIR}/mcp.json`) /
+  project (`${workDir}/.mcp.json`) /
+  thread (`${DATA_DIR}/threads/<key>.json`). `${VAR}` placeholders are
+  expanded by the bot before claude sees the config; tmp files are
+  written `0600` and cleaned up on `stopSession`.
+- **Commands.** `/bind`, `/unbind`, `/where` (per topic);
+  `/ls`, `/list`, `/new`, `/status` (global), `/doctor`, `/mcp`,
+  `/whoami`, `/version`, context-aware `/help`, `/stop-all`.
+- **Path traversal protection** — NFC normalisation, control-char
+  rejection, `realpathSync` + strict containment, symlink-out rejection,
+  `/bind .` rejection.
+- **Auto-welcome** when the bot is added to a forum supergroup, and
+  rich post-bind welcome with CLAUDE.md / .mcp.json / git stats.
+- **Token-bucket rate limiter** — 1 token/sec per chat, burst 5,
+  layered with reactive 429-retry. Prevents the multi-thread N-msg/sec
+  storm that would otherwise breach Telegram's per-chat budget.
+- **i18n** — `BOT_LANG=ru|en` (default ru) via `src/i18n.ts`.
+- **Two-instance docker-compose** (`examples/docker-compose.yml`) — pet
+  + work, isolated `DATA_DIR`, group, token, `OPENCODE_URL` port.
+- **Test suite** — `yarn test` (node:test + tsx). 54 tests cover R1
+  (ThreadKey round-trip), R2 (gating matrix), R3 (path-traversal
+  corpus), R4 (legacy file migration), R5 (concurrent state writes),
+  R6 (corrupted state archival), R7 (rate-limit token bucket + 429
+  retry), R8 (send-error classification).
+
+### Changed
+- **`WORK_DIR` → `WORK_ROOT`.** `WORK_DIR` is now fatal — bot fails to
+  start with a migration hint. `WORK_ROOT` points at the *parent* folder
+  containing your projects.
+- **`ALLOWED_GROUP_ID` is required.** Without it the bot has no idea
+  which forum supergroup to listen to.
+- **`DATA_DIR`** — single-instance default `~/.telegramCode`, mandatory
+  for two-instance setups.
+- **`--dangerously-skip-permissions`** hardcoded for symmetry with
+  opencode's auto-approve.
+- **`/clear`** scoped to the current thread (uses persisted message ids),
+  chunked at 100 per call, surfaces the Telegram 48 h limit.
+- **README** rewritten end-to-end around forum supergroup setup,
+  troubleshooting, MCP hierarchy, two-instance compose, migration.
+
+### Removed
+- One-bot-per-private-chat mode and `WORK_DIR` env var.
+- Legacy `~/.telegram-bot-messages.json` (renamed to `.bak` on first
+  start; no message-id migration into the new schema).
+
+### Deferred (Phase 9+)
+- `/mcp-add`, `/mcp-remove`, `/mcp-restart` UI commands.
+- OpenCode per-thread MCP override.
+- Routines / opencode-scheduler integration (`/schedule`,
+  `/schedule-cloud`) — Phase 8.
+- Claude Code hooks integration + `--input-format stream-json`
+  rewrite — Phase 9.
+
+### Stage 7 polish (shipped 2026-05-12)
+- Per-thread pinned status banner (`📁 subdir · agent · model ·
+  state`) — edits in place on every adapter lifecycle event,
+  unpinned on `/unbind`.
+- Fuzzy auto-bind on `forum_topic_created` — separator drift
+  (`my-api` ↔ `my_api` ↔ `my api`) is folded alongside case + NFC.
+- `/bind` keyboard pagination at 20 folders/page with
+  `[⬅️ Prev] [N/M] [Next ➡️]` nav row; `WORK_ROOT` listing cap
+  raised 50 → 200.
+- R9 (tmux re-attach) and R10 (claude `--resume` on bogus UUID)
+  filed as documented skip-tests pending an integration harness.
+
+### Migration
+1. Stop the 1.x bot.
+2. Create a forum supergroup, add the bot, follow
+   [README Quick Start](README.md#2-create-the-forum-supergroup).
+3. Rename `WORK_DIR` → `WORK_ROOT` and point at the parent folder.
+4. Add `ALLOWED_GROUP_ID` (find it via `/whoami` in the group).
+5. Set `DATA_DIR` if you run multiple instances on one host.
+6. `docker compose up -d`.
+
+The legacy `~/.telegram-bot-messages.json` is moved to `.bak` on first
+start; message-id history does not migrate.