chainlinnk 0.8.2

package/v0.5/contracts/dev/VRF.sol

@@ -0,0 +1,382 @@
+pragma solidity 0.5.0;
+
+////////////////////////////////////////////////////////////////////////////////
+//       XXX: Do not use in production until this code has been audited.
+////////////////////////////////////////////////////////////////////////////////
+
+/** ****************************************************************************
+    @notice on-chain verification of verifiable-random-function (VRF) proofs as
+            described in https://eprint.iacr.org/2017/099.pdf (security proofs)
+            and https://tools.ietf.org/html/draft-goldbe-vrf-01#section-5 (spec)
+    ****************************************************************************
+    @dev PURPOSE
+
+    @dev Reggie the Random Oracle (not his real job) wants to provide randomness
+         to Vera the verifier in such a way that Vera can be sure he's not
+         making his output up to suit himself. Reggie provides Vera a public key
+         to which he knows the secret key. Each time Vera provides a seed to
+         Reggie, he gives back a value which is computed completely
+         deterministically from the seed and the secret key, but which is
+         indistinguishable from randomness to Vera. Nonetheless, Vera is able to
+         verify that Reggie's output came from her seed and his secret key.
+
+    @dev The purpose of this contract is to perform that verification.
+    ****************************************************************************
+    @dev USAGE
+
+    @dev The main entry point is isValidVRFOutput. See its docstring.
+    Design notes
+    ------------
+
+    An elliptic curve point is generally represented in the solidity code as a
+    uint256[2], corresponding to its affine coordinates in GF(fieldSize).
+
+    For the sake of efficiency, this implementation deviates from the spec in
+    some minor ways:
+
+    - Keccak hash rather than SHA256. This is because it's provided natively by
+      the EVM, and therefore costs much less gas. The impact on security should
+      be minor.
+
+    - Secp256k1 curve instead of P-256. It abuses ECRECOVER for the most
+      expensive ECC arithmetic.
+
+    - scalarFromCurve recursively hashes and takes the relevant hash bits until
+      it finds a point less than the group order. This results in uniform
+      sampling over the the possible values scalarFromCurve could take. The spec
+      recommends just uing the first hash output as a uint256, which is a
+      slightly biased sample. See the zqHash function.
+
+    - hashToCurve recursively hashes until it finds a curve x-ordinate. The spec
+      recommends that the initial input should be concatenated with a nonce and
+      then hashed, and this input should be rehashed with the nonce updated
+      until an x-ordinate is found. Recursive hashing is slightly more
+      efficient. The spec also recommends
+      (https://tools.ietf.org/html/rfc8032#section-5.1.3 , by the specification
+      of RS2ECP) that the x-ordinate should be rejected if it is greater than
+      the modulus.
+
+    - In the calculation of the challenge value "c", the "u" value (or "k*g", if
+      you know the secret nonce)
+
+    The spec also requires the y ordinate of the hashToCurve to be negated if y
+    is odd. See http://www.secg.org/sec1-v2.pdf#page=17 . This sacrifices one
+    bit of entropy in the random output. Instead, here y is chosen based on
+    whether an extra hash of the inputs is even or odd. */
+
+contract VRF {
+
+  // See https://en.bitcoin.it/wiki/Secp256k1 for these constants.
+  uint256 constant public GROUP_ORDER = // Number of points in Secp256k1
+    // solium-disable-next-line indentation
+    0xFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFEBAAEDCE6AF48A03BBFD25E8CD0364141;
+  // Prime characteristic of the galois field over which Secp256k1 is defined
+  // solium-disable-next-line zeppelin/no-arithmetic-operations
+  uint256 constant public FIELD_SIZE =
+    // solium-disable-next-line indentation
+    0xFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFEFFFFFC2F;
+
+  // solium-disable zeppelin/no-arithmetic-operations
+  uint256 constant public MINUS_ONE = FIELD_SIZE - 1;
+  uint256 constant public MULTIPLICATIVE_GROUP_ORDER = FIELD_SIZE - 1;
+  // pow(x, SQRT_POWER, FIELD_SIZE) == √x, since FIELD_SIZE % 4 = 3
+  // https://en.wikipedia.org/wiki/Modular_square_root#Prime_or_prime_power_modulus
+  uint256 constant public SQRT_POWER = (FIELD_SIZE + 1) >> 2;
+
+  uint256 constant public WORD_LENGTH_BYTES = 0x20;
+
+  // (base**exponent) % modulus
+  // Cribbed from https://medium.com/@rbkhmrcr/precompiles-solidity-e5d29bd428c4
+  function bigModExp(uint256 base, uint256 exponent, uint256 modulus)
+    public view returns (uint256 exponentiation) {
+      uint256 callResult;
+      uint256[6] memory bigModExpContractInputs;
+      bigModExpContractInputs[0] = WORD_LENGTH_BYTES;  // Length of base
+      bigModExpContractInputs[1] = WORD_LENGTH_BYTES;  // Length of exponent
+      bigModExpContractInputs[2] = WORD_LENGTH_BYTES;  // Length of modulus
+      bigModExpContractInputs[3] = base;
+      bigModExpContractInputs[4] = exponent;
+      bigModExpContractInputs[5] = modulus;
+      uint256[1] memory output;
+      assembly { // solhint-disable-line no-inline-assembly
+      callResult :=
+        staticcall(13056,           // Gas cost. See EIP-198's 1st e.g.
+          0x05,                     // Bigmodexp contract address
+          bigModExpContractInputs,
+          0xc0,                     // Length of input segment
+          output,
+          0x20)                     // Length of output segment
+      }
+      if (callResult == 0) {revert("bigModExp failure!");}
+      return output[0];
+    }
+
+  // Computes a s.t. a^2 = x in the field. Assumes x is a square.
+  function squareRoot(uint256 x) public view returns (uint256) {
+    return bigModExp(x, SQRT_POWER, FIELD_SIZE);
+  }
+
+  function ySquared(uint256 x) public view returns (uint256) {
+    // Curve equation is y^2=x^3+7. See
+    return (bigModExp(x, 3, FIELD_SIZE) + 7) % FIELD_SIZE;
+  }
+
+  // Hash x uniformly into {0, ..., q-1}. Expects x to ALREADY have the
+  // necessary entropy... If x < q, returns x!
+  function zqHash(uint256 q, uint256 x) public pure returns (uint256 x_) {
+    x_ = x;
+    while (x_ >= q) {
+      x_ = uint256(keccak256(abi.encodePacked(x_)));
+    }
+  }
+
+  // One-way hash function onto the curve.
+  function hashToCurve(uint256[2] memory k, uint256 input)
+    public view returns (uint256[2] memory rv) {
+      bytes32 hash = keccak256(abi.encodePacked(k, input));
+      rv[0] = zqHash(FIELD_SIZE, uint256(hash));
+      while (true) {
+        rv[0] = zqHash(FIELD_SIZE, uint256(keccak256(abi.encodePacked(rv[0]))));
+        rv[1] = squareRoot(ySquared(rv[0]));
+        if (mulmod(rv[1], rv[1], FIELD_SIZE) == ySquared(rv[0])) {
+          break;
+        }
+      }
+      // Two possible y ordinates for x ordinate rv[0]; pick one "randomly"
+      if (uint256(keccak256(abi.encodePacked(rv[0], input))) % 2 == 0) {
+        rv[1] = -rv[1];
+      }
+    }
+
+  // Bits used in Ethereum address
+  uint256 constant public BOTTOM_160_BITS = 2**161 - 1;
+
+  // Returns the ethereum address associated with point.
+  function pointAddress(uint256[2] calldata point) external pure returns(address) {
+    bytes memory packedPoint = abi.encodePacked(point);
+    // Lower 160 bits of the keccak hash of (x,y) as 64 bytes
+    return address(uint256(keccak256(packedPoint)) & BOTTOM_160_BITS);
+  }
+
+  // Returns true iff q==scalar*x, with cryptographically high probability.
+  // Based on Vitalik Buterin's idea in above ethresear.ch post.
+  function ecmulVerify(uint256[2] memory x, uint256 scalar, uint256[2] memory q)
+    public pure returns(bool) {
+      // This ecrecover returns the address associated with c*R. See
+      // https://ethresear.ch/t/you-can-kinda-abuse-ecrecover-to-do-ecmul-in-secp256k1-today/2384/9
+      // The point corresponding to the address returned by ecrecover(0,v,r,s=c*r)
+      // is (r⁻¹ mod Q) * (c*r * R - 0 * g) = c * R, where R is the point
+      // specified by (v, r). See https://crypto.stackexchange.com/a/18106
+      bytes32 cTimesX0 = bytes32(mulmod(scalar, x[0], GROUP_ORDER));
+      uint8 parity = x[1] % 2 != 0 ? 28 : 27;
+      return ecrecover(bytes32(0), parity, bytes32(x[0]), cTimesX0) ==
+        address(uint256(keccak256(abi.encodePacked(q))) & BOTTOM_160_BITS);
+    }
+
+  // Returns x1/z1+x2/z2=(x1z2+x2z1)/(z1z2) in projective coordinates on P¹(𝔽ₙ)
+  function projectiveAdd(uint256 x1, uint256 z1, uint256 x2, uint256 z2)
+    external pure returns(uint256 x3, uint256 z3) {
+      uint256 crossMultNumerator1 = mulmod(z2, x1, FIELD_SIZE);
+      uint256 crossMultNumerator2 = mulmod(z1, x2, FIELD_SIZE);
+      uint256 denom = mulmod(z1, z2, FIELD_SIZE);
+      uint256 numerator = addmod(crossMultNumerator1, crossMultNumerator2, FIELD_SIZE);
+      return (numerator, denom);
+    }
+
+  // Returns x1/z1-x2/z2=(x1z2+x2z1)/(z1z2) in projective coordinates on P¹(𝔽ₙ)
+  function projectiveSub(uint256 x1, uint256 z1, uint256 x2, uint256 z2)
+    public pure returns(uint256 x3, uint256 z3) {
+      uint256 num1 = mulmod(z2, x1, FIELD_SIZE);
+      uint256 num2 = mulmod(FIELD_SIZE - x2, z1, FIELD_SIZE);
+      (x3, z3) = (addmod(num1, num2, FIELD_SIZE), mulmod(z1, z2, FIELD_SIZE));
+    }
+
+  // Returns x1/z1*x2/z2=(x1x2)/(z1z2), in projective coordinates on P¹(𝔽ₙ)
+  function projectiveMul(uint256 x1, uint256 z1, uint256 x2, uint256 z2)
+    public pure returns(uint256 x3, uint256 z3) {
+      (x3, z3) = (mulmod(x1, x2, FIELD_SIZE), mulmod(z1, z2, FIELD_SIZE));
+    }
+
+  // Returns x1/z1/(x2/z2)=(x1z2)/(x2z1), in projective coordinates on P¹(𝔽ₙ)
+  function projectiveDiv(uint256 x1, uint256 z1, uint256 x2, uint256 z2)
+    external pure returns(uint256 x3, uint256 z3) {
+      (x3, z3) = (mulmod(x1, z2, FIELD_SIZE), mulmod(z1, x2, FIELD_SIZE));
+    }
+
+  /** **************************************************************************
+      @notice Computes elliptic-curve sum, in projective co-ordinates
+
+      @dev Using projective coordinates avoids costly divisions
+
+      @dev To use this with x and y in affine coordinates, compute
+           projectiveECAdd(x[0], x[1], 1, y[0], y[1], 1)
+
+      @dev This can be used to calculate the z which is the inverse to zInv in
+           isValidVRFOutput. But consider using a faster re-implementation.
+
+      @dev This function assumes [x1,y1,z1],[x2,y2,z2] are valid projective
+           coordinates of secp256k1 points. That is safe in this contract,
+           because this method is only used by linearCombination, which checks
+           points are on the curve via ecrecover, and ensures valid projective
+           coordinates by passing z1=z2=1.
+      **************************************************************************
+      @param x1 The first affine coordinate of the first summand
+      @param y1 The second affine coordinate of the first summand
+      @param x2 The first affine coordinate of the second summand
+      @param y2 The second affine coordinate of the second summand
+      **************************************************************************
+      @return [x1,y1,z1]+[x2,y2,z2] as points on secp256k1, in P²(𝔽ₙ)
+  */
+  function projectiveECAdd(uint256 x1, uint256 y1, uint256 x2, uint256 y2)
+    public pure returns(uint256 x3, uint256 y3, uint256 z3) {
+      // See "Group law for E/K : y^2 = x^3 + ax + b", in section 3.1.2, p. 80,
+      // "Guide to Elliptic Curve Cryptography" by Hankerson, Menezes and Vanstone
+      // We take the equations there for (x3,y3), and homogenize them to
+      // projective coordinates. That way, no inverses are required, here, and we
+      // only need the one inverse in affineECAdd.
+      
+      // We only need the "point addition" equations from Hankerson et al. Can
+      // skip the "point doubling" equations because p1 == p2 is cryptographically
+      // impossible, and require'd not to be the case in linearCombination.
+      
+      // Add extra "projective coordinate" to the two points
+      (uint256 z1, uint256 z2) = (1, 1);
+      
+      // (lx, lz) = (y2-y1)/(x2-x1), i.e., gradient of secant line.
+      uint256 lx = addmod(y2, FIELD_SIZE - y1, FIELD_SIZE);
+      uint256 lz = addmod(x2, FIELD_SIZE - x1, FIELD_SIZE);
+      
+      uint256 dx; // Accumulates denominator from x3 calculation
+      // x3=((y2-y1)/(x2-x1))^2-x1-x2
+      (x3, dx) = projectiveMul(lx, lz, lx, lz); // ((y2-y1)/(x2-x1))^2
+      (x3, dx) = projectiveSub(x3, dx, x1, z1); // ((y2-y1)/(x2-x1))^2-x1
+      (x3, dx) = projectiveSub(x3, dx, x2, z2); // ((y2-y1)/(x2-x1))^2-x1-x2
+      
+      uint256 dy; // Accumulates denominator from y3 calculation
+      // y3=((y2-y1)/(x2-x1))(x1-x3)-y1
+      (y3, dy) = projectiveSub(x1, z1, x3, dx); // x1-x3
+      (y3, dy) = projectiveMul(y3, dy, lx, lz); // ((y2-y1)/(x2-x1))(x1-x3)
+      (y3, dy) = projectiveSub(y3, dy, y1, z1); // ((y2-y1)/(x2-x1))(x1-x3)-y1
+      
+      if (dx != dy) { // Cross-multiply to put everything over a common denominator
+        x3 = mulmod(x3, dy, FIELD_SIZE);
+        y3 = mulmod(y3, dx, FIELD_SIZE);
+        z3 = mulmod(dx, dy, FIELD_SIZE);
+      } else {
+        z3 = dx;
+      }
+    }
+
+  // Returns p1+p2, as affine points on secp256k1. invZ must be the inverse of
+  // the z returned by projectiveECAdd(p1, p2). It is computed off-chain to
+  // save gas.
+  function affineECAdd(
+    uint256[2] memory p1, uint256[2] memory p2,
+    uint256 invZ) public pure returns (uint256[2] memory) {
+    uint256 x;
+    uint256 y;
+    uint256 z;
+    (x, y, z) = projectiveECAdd(p1[0], p1[1], p2[0], p2[1]);
+    require(mulmod(z, invZ, FIELD_SIZE) == 1, "_invZ must be inverse of z");
+    // Clear the z ordinate of the projective representation by dividing through
+    // by it, to obtain the affine representation
+    return [mulmod(x, invZ, FIELD_SIZE), mulmod(y, invZ, FIELD_SIZE)];
+  }
+
+  // Returns true iff address(c*p+s*g) == lcWitness, where g is generator.
+  function verifyLinearCombinationWithGenerator(
+    uint256 c, uint256[2] memory p, uint256 s, address lcWitness)
+    public pure returns (bool) {
+      // ecrecover returns 0x0 in certain failure modes. Ensure witness differs.
+      require(lcWitness != address(0), "bad witness");
+      // https://ethresear.ch/t/you-can-kinda-abuse-ecrecover-to-do-ecmul-in-secp256k1-today/2384/9
+      // The point corresponding to the address returned by
+      // ecrecover(-s*p[0],v,_p[0],_c*p[0]) is
+      // (p[0]⁻¹ mod GROUP_ORDER)*(c*p[0]-(-s)*p[0]*g)=_c*p+s*g, where v
+      // is the parity of p[1]. See https://crypto.stackexchange.com/a/18106
+      bytes32 pseudoHash = bytes32(GROUP_ORDER - mulmod(p[0], s, GROUP_ORDER));
+      // https://bitcoin.stackexchange.com/questions/38351/ecdsa-v-r-s-what-is-v
+      uint8 v = (p[1] % 2 == 0) ? 27 : 28;
+      bytes32 pseudoSignature = bytes32(mulmod(c, p[0], GROUP_ORDER));
+      address computed = ecrecover(pseudoHash, v, bytes32(p[0]), pseudoSignature);
+      return computed == lcWitness;
+    }
+
+  // c*p1 + s*p2
+  function linearCombination(
+    uint256 c, uint256[2] memory p1, uint256[2] memory cp1Witness,
+    uint256 s, uint256[2] memory p2, uint256[2] memory sp2Witness,
+    uint256 zInv)
+    public pure returns (uint256[2] memory) {
+      require(cp1Witness[0] != sp2Witness[0], "points must differ in sum");
+      require(ecmulVerify(p1, c, cp1Witness), "First multiplication check failed");
+      require(ecmulVerify(p2, s, sp2Witness), "Second multiplication check failed");
+      return affineECAdd(cp1Witness, sp2Witness, zInv);
+    }
+
+  // Pseudo-random number from inputs. Corresponds to vrf.go/scalarFromCurve.
+  function scalarFromCurve(
+    uint256[2] memory hash, uint256[2] memory pk, uint256[2] memory gamma,
+    address uWitness, uint256[2] memory v)
+    public pure returns (uint256 s) {
+      bytes32 iHash = keccak256(abi.encodePacked(hash, pk, gamma, v, uWitness));
+      return zqHash(GROUP_ORDER, uint256(iHash));
+    }
+
+  // True if (gamma, c, s) is a correctly constructed randomness proof from pk
+  // and seed. zInv must be the inverse of the third ordinate from
+  // projectiveECAdd applied to cGammaWitness and sHashWitness
+  function verifyVRFProof(
+    uint256[2] memory pk, uint256[2] memory gamma, uint256 c, uint256 s,
+    uint256 seed, address uWitness, uint256[2] memory cGammaWitness,
+    uint256[2] memory sHashWitness, uint256 zInv)
+    public view returns (bool) {
+    // NB: Curve operations already check that (pkX, pkY), (gammaX, gammaY)
+    // are valid curve points. No need to do that explicitly.
+      require(
+        verifyLinearCombinationWithGenerator(c, pk, s, uWitness),
+        "Could not verify that address(c*pk+s*generator)=_uWitness");
+      uint256[2] memory hash = hashToCurve(pk, seed);
+      uint256[2] memory v = linearCombination(
+        c, gamma, cGammaWitness, s, hash, sHashWitness, zInv);
+      return (c == scalarFromCurve(hash, pk, gamma, uWitness, v));
+    }
+
+  /** **************************************************************************
+      @notice isValidVRFOutput returns true iff the proof can be verified as
+      showing that output was generated as mandated.
+
+      @dev See the invocation of verifyVRFProof in VRF.js, for an example.
+      **************************************************************************
+      @dev Let x be the secret key associated with the public key pk
+
+      @param pk Affine coordinates of the secp256k1 public key for this VRF
+      @param gamma Intermediate output of the VRF as an affine secp256k1 point
+      @param c The challenge value for proof that gamma = x*hashToCurve(seed)
+              See the variable c on  p. 28 of
+              https://www.cs.bu.edu/~goldbe/papers/VRF_ietf99_print.pdf
+      @param s The response value for the proof. See s on p. 28
+      @param seed The input seed from which the VRF output is computed
+      @param uWitness The ethereum address of c*pk + s*<generator>, in
+             elliptic-curve arithmetic
+      @param cGammaWitness c*gamma on the elliptic-curve
+      @param sHashWitness s*hashToCurve(seed) on the elliptic-curve
+      @param zInv Inverse of the third ordinate of the return value from
+             projectiveECAdd(c*gamma, s*hashToCurve(seed)). Passed in here
+             to save gas, because computing modular inverses is expensive in the
+             EVM.
+      @param output The actual output of the VRF.
+      **************************************************************************
+      @return True iff all the above parameters are correct
+  */
+  function isValidVRFOutput(
+    uint256[2] calldata pk, uint256[2] calldata gamma, uint256 c, uint256 s,
+    uint256 seed, address uWitness, uint256[2] calldata cGammaWitness,
+    uint256[2] calldata sHashWitness, uint256 zInv, uint256 output)
+    external view returns (bool) {
+      return verifyVRFProof(
+        pk, gamma, c, s, seed, uWitness, cGammaWitness, sHashWitness,
+        zInv) &&
+        (uint256(keccak256(abi.encodePacked(gamma))) == output);
+    }
+}

package/v0.5/contracts/dev/Whitelisted.sol

@@ -0,0 +1,41 @@
+pragma solidity 0.5.0;
+
+import "./Owned.sol";
+
+/**
+ * @title Whitelisted
+ * @notice Allows the owner to add and remove addresses from a whitelist
+ */
+contract Whitelisted is Owned {
+
+  mapping(address => bool) public whitelisted;
+
+  event AddedToWhitelist(address user);
+  event RemovedFromWhitelist(address user);
+
+  /**
+   * @notice Adds an address to the whitelist
+   * @param _user The address to whitelist
+   */
+  function addToWhitelist(address _user) external onlyOwner() {
+    whitelisted[_user] = true;
+    emit AddedToWhitelist(_user);
+  }
+
+  /**
+   * @notice Removes an address from the whitelist
+   * @param _user The address to remove
+   */
+  function removeFromWhitelist(address _user) external onlyOwner() {
+    delete whitelisted[_user];
+    emit RemovedFromWhitelist(_user);
+  }
+
+  /**
+   * @dev reverts if the caller is not whitelisted
+   */
+  modifier isWhitelisted() {
+    require(whitelisted[msg.sender], "Not whitelisted");
+    _;
+  }
+}

package/v0.5/contracts/dev/WhitelistedAggregator.sol

@@ -0,0 +1,80 @@
+pragma solidity 0.5.0;
+
+import "./PrepaidAggregator.sol";
+import "./Whitelisted.sol";
+
+/**
+ * @title Whitelisted Prepaid Aggregator contract
+ * @notice This contract requires addresses to be added to a whitelist
+ * in order to read the answers stored in the PrepaidAggregator contract
+ */
+contract WhitelistedAggregator is PrepaidAggregator, Whitelisted {
+
+  constructor(
+    address _link,
+    uint128 _paymentAmount,
+    uint32 _timeout,
+    uint8 _decimals,
+    bytes32 _description
+  ) public PrepaidAggregator(
+    _link,
+    _paymentAmount,
+    _timeout,
+    _decimals,
+    _description
+  ){}
+
+  /**
+   * @notice get the most recently reported answer
+   * @dev overridden funcion to add the isWhitelisted() modifier
+   */
+  function latestAnswer()
+    external
+    isWhitelisted()
+    view
+    returns (int256)
+  {
+    return _latestAnswer();
+  }
+
+  /**
+   * @notice get the most recent updated at timestamp
+   * @dev overridden funcion to add the isWhitelisted() modifier
+   */
+  function latestTimestamp()
+    external
+    view
+    isWhitelisted()
+    returns (uint256)
+  {
+    return _latestTimestamp();
+  }
+
+  /**
+   * @notice get past rounds answers
+   * @dev overridden funcion to add the isWhitelisted() modifier
+   * @param _roundId the round number to retrieve the answer for
+   */
+  function getAnswer(uint256 _roundId)
+    external
+    view
+    isWhitelisted()
+    returns (int256)
+  {
+    return _getAnswer(_roundId);
+  }
+
+  /**
+   * @notice get timestamp when an answer was last updated
+   * @dev overridden funcion to add the isWhitelisted() modifier
+   * @param _roundId the round number to retrieve the updated timestamp for
+   */
+  function getTimestamp(uint256 _roundId)
+    external
+    isWhitelisted()
+    view
+    returns (uint256)
+  {
+    return _getTimestamp(_roundId);
+  }
+}

package/v0.5/contracts/interfaces/ChainlinkRequestInterface.sol

@@ -0,0 +1,21 @@
+pragma solidity ^0.5.0;
+
+interface ChainlinkRequestInterface {
+  function oracleRequest(
+    address sender,
+    uint256 requestPrice,
+    bytes32 serviceAgreementID,
+    address callbackAddress,
+    bytes4 callbackFunctionId,
+    uint256 nonce,
+    uint256 dataVersion, // Currently unused, always "1"
+    bytes calldata data
+  ) external;
+
+  function cancelOracleRequest(
+    bytes32 requestId,
+    uint256 payment,
+    bytes4 callbackFunctionId,
+    uint256 expiration
+  ) external;
+}

package/v0.5/contracts/interfaces/ENSInterface.sol

@@ -0,0 +1,26 @@
+pragma solidity ^0.5.0;
+
+interface ENSInterface {
+
+  // Logged when the owner of a node assigns a new owner to a subnode.
+  event NewOwner(bytes32 indexed node, bytes32 indexed label, address owner);
+
+  // Logged when the owner of a node transfers ownership to a new account.
+  event Transfer(bytes32 indexed node, address owner);
+
+  // Logged when the resolver for a node changes.
+  event NewResolver(bytes32 indexed node, address resolver);
+
+  // Logged when the TTL of a node changes
+  event NewTTL(bytes32 indexed node, uint64 ttl);
+
+
+  function setSubnodeOwner(bytes32 node, bytes32 label, address _owner) external;
+  function setResolver(bytes32 node, address _resolver) external;
+  function setOwner(bytes32 node, address _owner) external;
+  function setTTL(bytes32 node, uint64 _ttl) external;
+  function owner(bytes32 node) external view returns (address);
+  function resolver(bytes32 node) external view returns (address);
+  function ttl(bytes32 node) external view returns (uint64);
+
+}

package/v0.5/contracts/interfaces/LinkTokenInterface.sol

@@ -0,0 +1,16 @@
+pragma solidity ^0.5.0;
+
+interface LinkTokenInterface {
+  function allowance(address owner, address spender) external returns (uint256 remaining);
+  function approve(address spender, uint256 value) external returns (bool success);
+  function balanceOf(address owner) external returns (uint256 balance);
+  function decimals() external returns (uint8 decimalPlaces);
+  function decreaseApproval(address spender, uint256 addedValue) external returns (bool success);
+  function increaseApproval(address spender, uint256 subtractedValue) external;
+  function name() external returns (string memory tokenName);
+  function symbol() external returns (string memory tokenSymbol);
+  function totalSupply() external returns (uint256 totalTokensIssued);
+  function transfer(address to, uint256 value) external returns (bool success);
+  function transferAndCall(address to, uint256 value, bytes calldata data) external returns (bool success);
+  function transferFrom(address from, address to, uint256 value) external returns (bool success);
+}

package/v0.5/contracts/interfaces/OracleInterface.sol

@@ -0,0 +1,16 @@
+pragma solidity ^0.5.0;
+
+interface OracleInterface {
+  function fulfillOracleRequest(
+    bytes32 requestId,
+    uint256 payment,
+    address callbackAddress,
+    bytes4 callbackFunctionId,
+    uint256 expiration,
+    bytes32 data
+  ) external returns (bool);
+  function getAuthorizationStatus(address node) external view returns (bool);
+  function setFulfillmentPermission(address node, bool allowed) external;
+  function withdraw(address recipient, uint256 amount) external;
+  function withdrawable() external view returns (uint256);
+}

package/v0.5/contracts/interfaces/PointerInterface.sol

@@ -0,0 +1,5 @@
+pragma solidity ^0.5.0;
+
+interface PointerInterface {
+  function getAddress() external view returns (address);
+}

package/v0.5/contracts/interfaces/WithdrawalInterface.sol

@@ -0,0 +1,16 @@
+pragma solidity ^0.5.0;
+
+interface WithdrawalInterface {
+  /**
+   * @notice transfer LINK held by the contract belonging to msg.sender to
+   * another address
+   * @param recipient is the address to send the LINK to
+   * @param amount is the amount of LINK to send
+   */
+  function withdraw(address recipient, uint256 amount) external;
+
+  /**
+   * @notice query the available amount of LINK to withdraw by msg.sender
+   */
+  function withdrawable() external view returns (uint256);
+}

package/v0.5/contracts/tests/BasicConsumer.sol

@@ -0,0 +1,13 @@
+pragma solidity ^0.5.0;
+
+import "./Consumer.sol";
+
+contract BasicConsumer is Consumer {
+
+  constructor(address _link, address _oracle, bytes32 _specId) public {
+    setChainlinkToken(_link);
+    setChainlinkOracle(_oracle);
+    specId = _specId;
+  }
+
+}