cdk-rds-sql 2.1.1 → 2.2.0

package/node_modules/aws-sdk/clients/mediaconvert.d.ts

@@ -244,7 +244,7 @@ declare namespace MediaConvert {
   export type AacRawFormat = "LATM_LOAS"|"NONE"|string;
   export interface AacSettings {
     /**
-     * Choose BROADCASTER_MIXED_AD when the input contains pre-mixed main audio + audio description (AD) as a stereo pair. The value for AudioType will be set to 3, which signals to downstream systems that this stream contains "broadcaster mixed AD". Note that the input received by the encoder must contain pre-mixed audio; the encoder does not perform the mixing. When you choose BROADCASTER_MIXED_AD, the encoder ignores any values you provide in AudioType and  FollowInputAudioType. Choose NORMAL when the input does not contain pre-mixed audio + audio description (AD). In this case, the encoder will use any values you provide for AudioType and FollowInputAudioType.
+     * Choose BROADCASTER_MIXED_AD when the input contains pre-mixed main audio + audio description (AD) as a stereo pair. The value for AudioType will be set to 3, which signals to downstream systems that this stream contains "broadcaster mixed AD". Note that the input received by the encoder must contain pre-mixed audio; the encoder does not perform the mixing. When you choose BROADCASTER_MIXED_AD, the encoder ignores any values you provide in AudioType and FollowInputAudioType. Choose NORMAL when the input does not contain pre-mixed audio + audio description (AD). In this case, the encoder will use any values you provide for AudioType and FollowInputAudioType.
      */
     AudioDescriptionBroadcasterMix?: AacAudioDescriptionBroadcasterMix;
     /**
@@ -256,7 +256,7 @@ declare namespace MediaConvert {
      */
     CodecProfile?: AacCodecProfile;
     /**
-     * Mono (Audio Description), Mono, Stereo, or 5.1 channel layout. Valid values depend on rate control mode and profile. "1.0 - Audio Description (Receiver Mix)" setting receives a stereo description plus control track and emits a mono AAC encode of the description track, with control data emitted in the PES header as per ETSI TS 101 154 Annex E.
+     * The Coding mode that you specify determines the number of audio channels and the audio channel layout metadata in your AAC output. Valid coding modes depend on the Rate control mode and Profile that you select. The following list shows the number of audio channels and channel layout for each coding mode. * 1.0 Audio Description (Receiver Mix): One channel, C. Includes audio description data from your stereo input. For more information see ETSI TS 101 154 Annex E. * 1.0 Mono: One channel, C. * 2.0 Stereo: Two channels, L, R. * 5.1 Surround: Five channels, C, L, R, Ls, Rs, LFE.
      */
     CodingMode?: AacCodingMode;
     /**
@@ -268,7 +268,7 @@ declare namespace MediaConvert {
      */
     RawFormat?: AacRawFormat;
     /**
-     * Sample rate in Hz. Valid values depend on rate control mode and profile.
+     * Specify the Sample rate in Hz. Valid sample rates depend on the Profile and Coding mode that you select. The following list shows valid sample rates for each Profile and Coding mode. * LC Profile, Coding mode 1.0, 2.0, and Receiver Mix: 8000, 12000, 16000, 22050, 24000, 32000, 44100, 48000, 88200, 96000. * LC Profile, Coding mode 5.1: 32000, 44100, 48000, 96000. * HEV1 Profile, Coding mode 1.0 and Receiver Mix: 22050, 24000, 32000, 44100, 48000. * HEV1 Profile, Coding mode 2.0 and 5.1: 32000, 44100, 48000, 96000. * HEV2 Profile, Coding mode 2.0: 22050, 24000, 32000, 44100, 48000.
      */
     SampleRate?: __integerMin8000Max96000;
     /**
@@ -1111,6 +1111,10 @@ declare namespace MediaConvert {
      * Keep this setting at the default value of 0, unless you are troubleshooting a problem with how devices play back the end of your video asset. If you know that player devices are hanging on the final segment of your video because the length of your final segment is too short, use this setting to specify a minimum final segment length, in seconds. Choose a value that is greater than or equal to 1 and less than your segment length. When you specify a value for this setting, the encoder will combine any final segment that is shorter than the length that you specify with the previous segment. For example, your segment length is 3 seconds and your final segment is .5 seconds without a minimum final segment length; when you set the minimum final segment length to 1, your final segment is 3.5 seconds.
      */
     MinFinalSegmentLength?: __doubleMin0Max2147483647;
+    /**
+     * Specify how the value for bandwidth is determined for each video Representation in your output MPD manifest. We recommend that you choose a MPD manifest bandwidth type that is compatible with your downstream player configuration. Max: Use the same value that you specify for Max bitrate in the video output, in bits per second. Average: Use the calculated average bitrate of the encoded video output, in bits per second.
+     */
+    MpdManifestBandwidthType?: CmafMpdManifestBandwidthType;
     /**
      * Specify whether your DASH profile is on-demand or main. When you choose Main profile (MAIN_PROFILE), the service signals  urn:mpeg:dash:profile:isoff-main:2011 in your .mpd DASH manifest. When you choose On-demand (ON_DEMAND_PROFILE), the service signals urn:mpeg:dash:profile:isoff-on-demand:2011 in your .mpd. When you choose On-demand, you must also set the output group setting Segment control (SegmentControl) to Single file (SINGLE_FILE).
      */
@@ -1139,6 +1143,10 @@ declare namespace MediaConvert {
      * When set to LEGACY, the segment target duration is always rounded up to the nearest integer value above its current value in seconds. When set to SPEC\\_COMPLIANT, the segment target duration is rounded up to the nearest integer value if fraction seconds are greater than or equal to 0.5 (>= 0.5) and rounded down if less than 0.5 (< 0.5). You may need to use LEGACY if your client needs to ensure that the target duration is always longer than the actual duration of the segment. Some older players may experience interrupted playback when the actual duration of a track in a segment is longer than the target duration.
      */
     TargetDurationCompatibilityMode?: CmafTargetDurationCompatibilityMode;
+    /**
+     * Specify the video sample composition time offset mode in the output fMP4 TRUN box. For wider player compatibility, set Video composition offsets to Unsigned or leave blank. The earliest presentation time may be greater than zero, and sample composition time offsets will increment using unsigned integers. For strict fMP4 video and audio timing, set Video composition offsets to Signed. The earliest presentation time will be equal to zero, and sample composition time offsets will increment using signed integers.
+     */
+    VideoCompositionOffsets?: CmafVideoCompositionOffsets;
     /**
      * When set to ENABLED, a DASH MPD manifest will be generated for this output.
      */
@@ -1184,12 +1192,14 @@ declare namespace MediaConvert {
   export type CmafKeyProviderType = "SPEKE"|"STATIC_KEY"|string;
   export type CmafManifestCompression = "GZIP"|"NONE"|string;
   export type CmafManifestDurationFormat = "FLOATING_POINT"|"INTEGER"|string;
+  export type CmafMpdManifestBandwidthType = "AVERAGE"|"MAX"|string;
   export type CmafMpdProfile = "MAIN_PROFILE"|"ON_DEMAND_PROFILE"|string;
   export type CmafPtsOffsetHandlingForBFrames = "ZERO_BASED"|"MATCH_INITIAL_PTS"|string;
   export type CmafSegmentControl = "SINGLE_FILE"|"SEGMENTED_FILES"|string;
   export type CmafSegmentLengthControl = "EXACT"|"GOP_MULTIPLE"|string;
   export type CmafStreamInfResolution = "INCLUDE"|"EXCLUDE"|string;
   export type CmafTargetDurationCompatibilityMode = "LEGACY"|"SPEC_COMPLIANT"|string;
+  export type CmafVideoCompositionOffsets = "SIGNED"|"UNSIGNED"|string;
   export type CmafWriteDASHManifest = "DISABLED"|"ENABLED"|string;
   export type CmafWriteHLSManifest = "DISABLED"|"ENABLED"|string;
   export type CmafWriteSegmentTimelineInRepresentation = "ENABLED"|"DISABLED"|string;
@@ -1198,6 +1208,7 @@ declare namespace MediaConvert {
   export type CmfcDescriptiveVideoServiceFlag = "DONT_FLAG"|"FLAG"|string;
   export type CmfcIFrameOnlyManifest = "INCLUDE"|"EXCLUDE"|string;
   export type CmfcKlvMetadata = "PASSTHROUGH"|"NONE"|string;
+  export type CmfcManifestMetadataSignaling = "ENABLED"|"DISABLED"|string;
   export type CmfcScte35Esam = "INSERT"|"NONE"|string;
   export type CmfcScte35Source = "PASSTHROUGH"|"NONE"|string;
   export interface CmfcSettings {
@@ -1229,6 +1240,10 @@ declare namespace MediaConvert {
      * To include key-length-value metadata in this output: Set KLV metadata insertion to Passthrough. MediaConvert reads KLV metadata present in your input and writes each instance to a separate event message box in the output, according to MISB ST1910.1. To exclude this KLV metadata: Set KLV metadata insertion to None or leave blank.
      */
     KlvMetadata?: CmfcKlvMetadata;
+    /**
+     * To add an InbandEventStream element in your output MPD manifest for each type of event message, set Manifest metadata signaling to Enabled. For ID3 event messages, the InbandEventStream element schemeIdUri will be same value that you specify for ID3 metadata scheme ID URI. For SCTE35 event messages, the InbandEventStream element schemeIdUri will be "urn:scte:scte35:2013:bin". To leave these elements out of your output MPD manifest, set Manifest metadata signaling to Disabled.
+     */
+    ManifestMetadataSignaling?: CmfcManifestMetadataSignaling;
     /**
      * Use this setting only when you specify SCTE-35 markers from ESAM. Choose INSERT to put SCTE-35 markers in this output at the insertion points that you specify in an ESAM XML document. Provide the document in the setting SCC XML (sccXml).
      */
@@ -1241,8 +1256,24 @@ declare namespace MediaConvert {
      * To include ID3 metadata in this output: Set ID3 metadata (timedMetadata) to Passthrough (PASSTHROUGH). Specify this ID3 metadata in Custom ID3 metadata inserter (timedMetadataInsertion). MediaConvert writes each instance of ID3 metadata in a separate Event Message (eMSG) box. To exclude this ID3 metadata: Set ID3 metadata to None (NONE) or leave blank.
      */
     TimedMetadata?: CmfcTimedMetadata;
+    /**
+     * Specify the event message box (eMSG) version for ID3 timed metadata in your output.
+For more information, see ISO/IEC 23009-1:2022 section 5.10.3.3.3 Syntax.
+Leave blank to use the default value Version 0.
+When you specify Version 1, you must also set ID3 metadata (timedMetadata) to Passthrough.
+     */
+    TimedMetadataBoxVersion?: CmfcTimedMetadataBoxVersion;
+    /**
+     * Specify the event message box (eMSG) scheme ID URI (scheme_id_uri) for ID3 timed metadata in your output. For more informaiton, see ISO/IEC 23009-1:2022 section 5.10.3.3.4 Semantics. Leave blank to use the default value: https://aomedia.org/emsg/ID3 When you specify a value for ID3 metadata scheme ID URI, you must also set ID3 metadata (timedMetadata) to Passthrough.
+     */
+    TimedMetadataSchemeIdUri?: __stringMax1000;
+    /**
+     * Specify the event message box (eMSG) value for ID3 timed metadata in your output. For more informaiton, see ISO/IEC 23009-1:2022 section 5.10.3.3.4 Semantics. When you specify a value for ID3 Metadata Value, you must also set ID3 metadata (timedMetadata) to Passthrough.
+     */
+    TimedMetadataValue?: __stringMax1000;
   }
   export type CmfcTimedMetadata = "PASSTHROUGH"|"NONE"|string;
+  export type CmfcTimedMetadataBoxVersion = "VERSION_0"|"VERSION_1"|string;
   export interface ColorCorrector {
     /**
      * Brightness level.
@@ -1560,6 +1591,10 @@ declare namespace MediaConvert {
      * Keep this setting at the default value of 0, unless you are troubleshooting a problem with how devices play back the end of your video asset. If you know that player devices are hanging on the final segment of your video because the length of your final segment is too short, use this setting to specify a minimum final segment length, in seconds. Choose a value that is greater than or equal to 1 and less than your segment length. When you specify a value for this setting, the encoder will combine any final segment that is shorter than the length that you specify with the previous segment. For example, your segment length is 3 seconds and your final segment is .5 seconds without a minimum final segment length; when you set the minimum final segment length to 1, your final segment is 3.5 seconds.
      */
     MinFinalSegmentLength?: __doubleMin0Max2147483647;
+    /**
+     * Specify how the value for bandwidth is determined for each video Representation in your output MPD manifest. We recommend that you choose a MPD manifest bandwidth type that is compatible with your downstream player configuration. Max: Use the same value that you specify for Max bitrate in the video output, in bits per second. Average: Use the calculated average bitrate of the encoded video output, in bits per second.
+     */
+    MpdManifestBandwidthType?: DashIsoMpdManifestBandwidthType;
     /**
      * Specify whether your DASH profile is on-demand or main. When you choose Main profile (MAIN_PROFILE), the service signals  urn:mpeg:dash:profile:isoff-main:2011 in your .mpd DASH manifest. When you choose On-demand (ON_DEMAND_PROFILE), the service signals urn:mpeg:dash:profile:isoff-on-demand:2011 in your .mpd. When you choose On-demand, you must also set the output group setting Segment control (SegmentControl) to Single file (SINGLE_FILE).
      */
@@ -1580,6 +1615,10 @@ declare namespace MediaConvert {
      * Specify how you want MediaConvert to determine the segment length. Choose Exact (EXACT) to have the encoder use the exact length that you specify with the setting Segment length (SegmentLength). This might result in extra I-frames. Choose Multiple of GOP (GOP_MULTIPLE) to have the encoder round up the segment lengths to match the next GOP boundary.
      */
     SegmentLengthControl?: DashIsoSegmentLengthControl;
+    /**
+     * Specify the video sample composition time offset mode in the output fMP4 TRUN box. For wider player compatibility, set Video composition offsets to Unsigned or leave blank. The earliest presentation time may be greater than zero, and sample composition time offsets will increment using unsigned integers. For strict fMP4 video and audio timing, set Video composition offsets to Signed. The earliest presentation time will be equal to zero, and sample composition time offsets will increment using signed integers.
+     */
+    VideoCompositionOffsets?: DashIsoVideoCompositionOffsets;
     /**
      * If you get an HTTP error in the 400 range when you play back your DASH output, enable this setting and run your transcoding job again. When you enable this setting, the service writes precise segment durations in the DASH manifest. The segment duration information appears inside the SegmentTimeline element, inside SegmentTemplate at the Representation level. When you don't enable this setting, the service writes approximate segment durations in your DASH manifest.
      */
@@ -1614,11 +1653,13 @@ declare namespace MediaConvert {
     TileWidth?: __integerMin1Max512;
   }
   export type DashIsoIntervalCadence = "FOLLOW_IFRAME"|"FOLLOW_CUSTOM"|string;
+  export type DashIsoMpdManifestBandwidthType = "AVERAGE"|"MAX"|string;
   export type DashIsoMpdProfile = "MAIN_PROFILE"|"ON_DEMAND_PROFILE"|string;
   export type DashIsoPlaybackDeviceCompatibility = "CENC_V1"|"UNENCRYPTED_SEI"|string;
   export type DashIsoPtsOffsetHandlingForBFrames = "ZERO_BASED"|"MATCH_INITIAL_PTS"|string;
   export type DashIsoSegmentControl = "SINGLE_FILE"|"SEGMENTED_FILES"|string;
   export type DashIsoSegmentLengthControl = "EXACT"|"GOP_MULTIPLE"|string;
+  export type DashIsoVideoCompositionOffsets = "SIGNED"|"UNSIGNED"|string;
   export type DashIsoWriteSegmentTimelineInRepresentation = "ENABLED"|"DISABLED"|string;
   export type DecryptionMode = "AES_CTR"|"AES_CBC"|"AES_GCM"|string;
   export type DeinterlaceAlgorithm = "INTERPOLATE"|"INTERPOLATE_TICKER"|"BLEND"|"BLEND_TICKER"|string;
@@ -4218,6 +4259,7 @@ Within your job settings, all of your DVB-Sub settings must be identical.
   export type MpdAudioDuration = "DEFAULT_CODEC_DURATION"|"MATCH_VIDEO_DURATION"|string;
   export type MpdCaptionContainerType = "RAW"|"FRAGMENTED_MP4"|string;
   export type MpdKlvMetadata = "NONE"|"PASSTHROUGH"|string;
+  export type MpdManifestMetadataSignaling = "ENABLED"|"DISABLED"|string;
   export type MpdScte35Esam = "INSERT"|"NONE"|string;
   export type MpdScte35Source = "PASSTHROUGH"|"NONE"|string;
   export interface MpdSettings {
@@ -4237,6 +4279,10 @@ Within your job settings, all of your DVB-Sub settings must be identical.
      * To include key-length-value metadata in this output: Set KLV metadata insertion to Passthrough. MediaConvert reads KLV metadata present in your input and writes each instance to a separate event message box in the output, according to MISB ST1910.1. To exclude this KLV metadata: Set KLV metadata insertion to None or leave blank.
      */
     KlvMetadata?: MpdKlvMetadata;
+    /**
+     * To add an InbandEventStream element in your output MPD manifest for each type of event message, set Manifest metadata signaling to Enabled. For ID3 event messages, the InbandEventStream element schemeIdUri will be same value that you specify for ID3 metadata scheme ID URI. For SCTE35 event messages, the InbandEventStream element schemeIdUri will be "urn:scte:scte35:2013:bin". To leave these elements out of your output MPD manifest, set Manifest metadata signaling to Disabled.
+     */
+    ManifestMetadataSignaling?: MpdManifestMetadataSignaling;
     /**
      * Use this setting only when you specify SCTE-35 markers from ESAM. Choose INSERT to put SCTE-35 markers in this output at the insertion points that you specify in an ESAM XML document. Provide the document in the setting SCC XML (sccXml).
      */
@@ -4249,8 +4295,24 @@ Within your job settings, all of your DVB-Sub settings must be identical.
      * To include ID3 metadata in this output: Set ID3 metadata (timedMetadata) to Passthrough (PASSTHROUGH). Specify this ID3 metadata in Custom ID3 metadata inserter (timedMetadataInsertion). MediaConvert writes each instance of ID3 metadata in a separate Event Message (eMSG) box. To exclude this ID3 metadata: Set ID3 metadata to None (NONE) or leave blank.
      */
     TimedMetadata?: MpdTimedMetadata;
+    /**
+     * Specify the event message box (eMSG) version for ID3 timed metadata in your output.
+For more information, see ISO/IEC 23009-1:2022 section 5.10.3.3.3 Syntax.
+Leave blank to use the default value Version 0.
+When you specify Version 1, you must also set ID3 metadata (timedMetadata) to Passthrough.
+     */
+    TimedMetadataBoxVersion?: MpdTimedMetadataBoxVersion;
+    /**
+     * Specify the event message box (eMSG) scheme ID URI (scheme_id_uri) for ID3 timed metadata in your output. For more informaiton, see ISO/IEC 23009-1:2022 section 5.10.3.3.4 Semantics. Leave blank to use the default value: https://aomedia.org/emsg/ID3 When you specify a value for ID3 metadata scheme ID URI, you must also set ID3 metadata (timedMetadata) to Passthrough.
+     */
+    TimedMetadataSchemeIdUri?: __stringMax1000;
+    /**
+     * Specify the event message box (eMSG) value for ID3 timed metadata in your output. For more informaiton, see ISO/IEC 23009-1:2022 section 5.10.3.3.4 Semantics. When you specify a value for ID3 Metadata Value, you must also set ID3 metadata (timedMetadata) to Passthrough.
+     */
+    TimedMetadataValue?: __stringMax1000;
   }
   export type MpdTimedMetadata = "PASSTHROUGH"|"NONE"|string;
+  export type MpdTimedMetadataBoxVersion = "VERSION_0"|"VERSION_1"|string;
   export type Mpeg2AdaptiveQuantization = "OFF"|"LOW"|"MEDIUM"|"HIGH"|string;
   export type Mpeg2CodecLevel = "AUTO"|"LOW"|"MAIN"|"HIGH1440"|"HIGH"|string;
   export type Mpeg2CodecProfile = "MAIN"|"PROFILE_422"|string;
@@ -4387,7 +4449,7 @@ Within your job settings, all of your DVB-Sub settings must be identical.
      */
     SpatialAdaptiveQuantization?: Mpeg2SpatialAdaptiveQuantization;
     /**
-     * Specify whether this output's video uses the D10 syntax. Keep the default value to  not use the syntax. Related settings: When you choose D10 (D_10) for your MXF  profile (profile), you must also set this value to to D10 (D_10).
+     * Specify whether this output's video uses the D10 syntax. Keep the default value to  not use the syntax. Related settings: When you choose D10 (D_10) for your MXF  profile (profile), you must also set this value to D10 (D_10).
      */
     Syntax?: Mpeg2Syntax;
     /**
@@ -6116,6 +6178,7 @@ Within your job settings, all of your DVB-Sub settings must be identical.
   export type __mapOfCaptionSelector = {[key: string]: CaptionSelector};
   export type __mapOf__string = {[key: string]: __string};
   export type __string = string;
+  export type __stringMax1000 = string;
   export type __stringMin0 = string;
   export type __stringMin1 = string;
   export type __stringMin11Max11Pattern01D20305D205D = string;

package/node_modules/aws-sdk/clients/medialive.d.ts

@@ -788,6 +788,12 @@ Note that this field and audioType are both ignored if inputType is broadcasterM
   }
   export type AudioDescriptionAudioTypeControl = "FOLLOW_INPUT"|"USE_CONFIGURED"|string;
   export type AudioDescriptionLanguageCodeControl = "FOLLOW_INPUT"|"USE_CONFIGURED"|string;
+  export interface AudioDolbyEDecode {
+    /**
+     * Applies only to Dolby E. Enter the program ID (according to the metadata in the audio) of the Dolby E program to extract from the specified track. One program extracted per audio selector. To select multiple programs, create multiple selectors with the same Track and different Program numbers. “All channels” means to ignore the program IDs and include all the channels in this selector; useful if metadata is known to be incorrect.
+     */
+    ProgramSelection: DolbyEProgramSelection;
+  }
   export interface AudioHlsRenditionSelection {
     /**
      * Specifies the GROUP-ID in the #EXT-X-MEDIA tag of the target HLS audio rendition.
@@ -902,6 +908,10 @@ Alternate rendition that the client will not try to play back by default. Repres
      * Selects one or more unique audio tracks from within a source.
      */
     Tracks: __listOfAudioTrack;
+    /**
+     * Configure decoding options for Dolby E streams - these should be Dolby E frames carried in PCM streams tagged with SMPTE-337
+     */
+    DolbyEDecode?: AudioDolbyEDecode;
   }
   export type AudioType = "CLEAN_EFFECTS"|"HEARING_IMPAIRED"|"UNDEFINED"|"VISUAL_IMPAIRED_COMMENTARY"|string;
   export interface AudioWatermarkSettings {
@@ -2449,6 +2459,7 @@ during input switch actions. Presently, this functionality only works with MP4_F
   }
   export type DeviceSettingsSyncState = "SYNCED"|"SYNCING"|string;
   export type DeviceUpdateStatus = "UP_TO_DATE"|"NOT_UP_TO_DATE"|"UPDATING"|string;
+  export type DolbyEProgramSelection = "ALL_CHANNELS"|"PROGRAM_1"|"PROGRAM_2"|"PROGRAM_3"|"PROGRAM_4"|"PROGRAM_5"|"PROGRAM_6"|"PROGRAM_7"|"PROGRAM_8"|string;
   export interface DolbyVision81Settings {
   }
   export interface DvbNitSettings {
@@ -2814,15 +2825,15 @@ You specify only the font family. All other style information (color, bold, posi
      */
     AdAvailOffset?: __integerMinNegative1000Max1000;
     /**
-     * Password if credentials are required to access the POIS endpoint.  This is a reference to an AWS parameter store name from which the password can be retrieved.  AWS Parameter store format: "ssm://"
+     * Documentation update needed
      */
     PasswordParam?: __string;
     /**
      * The URL of the signal conditioner endpoint on the Placement Opportunity Information System (POIS). MediaLive sends SignalProcessingEvents here when SCTE-35 messages are read.
      */
-    PoisEndpoint: __string;
+    PoisEndpoint: __stringMax2048;
     /**
-     * Username if credentials are required to access the POIS endpoint.  This can be either a plaintext username, or a reference to an AWS parameter store name from which the username can be retrieved.  AWS Parameter store format: "ssm://"
+     * Documentation update needed
      */
     Username?: __string;
     /**
@@ -2944,6 +2955,10 @@ If you disable the feature on an existing schedule, make sure that you first del
      * Unit for the frame capture interval.
      */
     CaptureIntervalUnits?: FrameCaptureIntervalUnit;
+    /**
+     * Timecode burn-in settings
+     */
+    TimecodeBurninSettings?: TimecodeBurninSettings;
   }
   export interface GlobalConfiguration {
     /**
@@ -3198,6 +3213,10 @@ This field is optional; when no value is specified the encoder will choose the n
 - 'picTimingSei': Pass through picture timing SEI messages from the source specified in Timecode Config
      */
     TimecodeInsertion?: H264TimecodeInsertionBehavior;
+    /**
+     * Timecode burn-in settings
+     */
+    TimecodeBurninSettings?: TimecodeBurninSettings;
   }
   export type H264SpatialAq = "DISABLED"|"ENABLED"|string;
   export type H264SubGopLength = "DYNAMIC"|"FIXED"|string;
@@ -3360,6 +3379,10 @@ This field is optional; when no value is specified the encoder will choose the n
 - 'picTimingSei': Pass through picture timing SEI messages from the source specified in Timecode Config
      */
     TimecodeInsertion?: H265TimecodeInsertionBehavior;
+    /**
+     * Timecode burn-in settings
+     */
+    TimecodeBurninSettings?: TimecodeBurninSettings;
   }
   export type H265Tier = "HIGH"|"MAIN"|string;
   export type H265TimecodeInsertionBehavior = "DISABLED"|"PIC_TIMING_SEI"|string;
@@ -3573,7 +3596,7 @@ If this "keep segments" number is too low, the following might happen: the playe
      */
     ManifestDurationFormat?: HlsManifestDurationFormat;
     /**
-     * When set, minimumSegmentLength is enforced by looking ahead and back within the specified range for a nearby avail and extending the segment size if needed.
+     * Minimum length of MPEG-2 Transport Stream segments in seconds. When set, minimum segment length is enforced by looking ahead and back within the specified range for a nearby avail and extending the segment size if needed.
      */
     MinSegmentLength?: __integerMin0;
     /**
@@ -3615,7 +3638,7 @@ For an HLS output group with MediaPackage as the destination, the DISABLED behav
      */
     RedundantManifest?: HlsRedundantManifest;
     /**
-     * Length of MPEG-2 Transport Stream segments to create (in seconds). Note that segments will end on the next keyframe after this number of seconds, so actual segment length may be longer.
+     * Length of MPEG-2 Transport Stream segments to create in seconds. Note that segments will end on the next keyframe after this duration, so actual segment length may be longer.
      */
     SegmentLength?: __integerMin1;
     /**
@@ -3941,6 +3964,10 @@ to.
      * The maximum bitrate in bits per second. Set a value here to throttle the bitrate of the source video.
      */
     MaxBitrate?: __integer;
+    /**
+     * The Link device's buffer size (latency) in milliseconds (ms).
+     */
+    LatencyMs?: __integer;
   }
   export type InputDeviceConfiguredInput = "AUTO"|"HDMI"|"SDI"|string;
   export type InputDeviceConnectionState = "DISCONNECTED"|"CONNECTED"|string;
@@ -3977,6 +4004,10 @@ to.
      * The width of the video source, in pixels.
      */
     Width?: __integer;
+    /**
+     * The Link device's buffer size (latency) in milliseconds (ms). You can specify this value.
+     */
+    LatencyMs?: __integer;
   }
   export type InputDeviceIpScheme = "STATIC"|"DHCP"|string;
   export interface InputDeviceNetworkSettings {
@@ -4066,7 +4097,7 @@ to.
     UhdDeviceSettings?: InputDeviceUhdSettings;
   }
   export type InputDeviceTransferType = "OUTGOING"|"INCOMING"|string;
-  export type InputDeviceType = "HD"|string;
+  export type InputDeviceType = "HD"|"UHD"|string;
   export interface InputDeviceUhdSettings {
     /**
      * If you specified Auto as the configured input, specifies which of the sources is currently active (SDI or HDMI).
@@ -4100,6 +4131,10 @@ to.
      * The width of the video source, in pixels.
      */
     Width?: __integer;
+    /**
+     * The Link device's buffer size (latency) in milliseconds (ms). You can specify this value.
+     */
+    LatencyMs?: __integer;
   }
   export type InputFilter = "AUTO"|"DISABLED"|"FORCED"|string;
   export interface InputLocation {
@@ -5045,6 +5080,10 @@ DISABLED: do not include timecodes.
 GOP_TIMECODE: Include timecode metadata in the GOP header.
      */
     TimecodeInsertion?: Mpeg2TimecodeInsertionBehavior;
+    /**
+     * Timecode burn-in settings
+     */
+    TimecodeBurninSettings?: TimecodeBurninSettings;
   }
   export type Mpeg2SubGopLength = "DYNAMIC"|"FIXED"|string;
   export type Mpeg2TimecodeInsertionBehavior = "DISABLED"|"GOP_TIMECODE"|string;
@@ -6540,6 +6579,22 @@ one destination per packager.
     Strength?: TemporalFilterStrength;
   }
   export type TemporalFilterStrength = "AUTO"|"STRENGTH_1"|"STRENGTH_2"|"STRENGTH_3"|"STRENGTH_4"|"STRENGTH_5"|"STRENGTH_6"|"STRENGTH_7"|"STRENGTH_8"|"STRENGTH_9"|"STRENGTH_10"|"STRENGTH_11"|"STRENGTH_12"|"STRENGTH_13"|"STRENGTH_14"|"STRENGTH_15"|"STRENGTH_16"|string;
+  export type TimecodeBurninFontSize = "EXTRA_SMALL_10"|"LARGE_48"|"MEDIUM_32"|"SMALL_16"|string;
+  export type TimecodeBurninPosition = "BOTTOM_CENTER"|"BOTTOM_LEFT"|"BOTTOM_RIGHT"|"MIDDLE_CENTER"|"MIDDLE_LEFT"|"MIDDLE_RIGHT"|"TOP_CENTER"|"TOP_LEFT"|"TOP_RIGHT"|string;
+  export interface TimecodeBurninSettings {
+    /**
+     * Choose a timecode burn-in font size
+     */
+    FontSize: TimecodeBurninFontSize;
+    /**
+     * Choose a timecode burn-in output position
+     */
+    Position: TimecodeBurninPosition;
+    /**
+     * Create a timecode burn-in prefix (optional)
+     */
+    Prefix?: __stringMax255;
+  }
   export interface TimecodeConfig {
     /**
      * Identifies the source for the timecode that will be associated with the events outputs.

package/node_modules/aws-sdk/clients/mediapackagevod.d.ts

@@ -379,7 +379,7 @@ rounded to the nearest multiple of the source fragment duration.
      */
     Profile?: Profile;
     /**
-     * The source of scte markers used. When set to SEGMENTS, the scte markers are sourced from the segments of the ingested content. When set to MANIFEST, the scte markers are sourced from the manifest of the ingested content.
+     * The source of scte markers used. When set to SEGMENTS, the scte markers are sourced from the segments of the ingested content. When set to MANIFEST, the scte markers are sourced from the manifest of the ingested content. The MANIFEST value is compatible with source HLS playlists using the SCTE-35 Enhanced syntax (#EXT-OATCLS-SCTE35 tags). SCTE-35 Elemental and SCTE-35 Daterange syntaxes are not supported with this option.
      */
     ScteMarkersSource?: ScteMarkersSource;
     StreamSelection?: StreamSelection;
@@ -515,6 +515,10 @@ rounded to the nearest multiple of the source segment duration.
     Id: __string;
   }
   export interface DescribePackagingGroupResponse {
+    /**
+     * The approximate asset count of the PackagingGroup.
+     */
+    ApproximateAssetCount?: __integer;
     /**
      * The ARN of the PackagingGroup.
      */
@@ -757,6 +761,10 @@ rounded to the nearest multiple of the source fragment duration.
     Tags?: Tags;
   }
   export interface PackagingGroup {
+    /**
+     * The approximate asset count of the PackagingGroup.
+     */
+    ApproximateAssetCount?: __integer;
     /**
      * The ARN of the PackagingGroup.
      */
@@ -839,6 +847,10 @@ MediaPackage will assume when accessing the key provider service.
     Id: __string;
   }
   export interface UpdatePackagingGroupResponse {
+    /**
+     * The approximate asset count of the PackagingGroup.
+     */
+    ApproximateAssetCount?: __integer;
     /**
      * The ARN of the PackagingGroup.
      */