cdk-rds-sql 1.3.2 → 2.0.0

package/node_modules/aws-sdk/clients/ecs.d.ts

@@ -180,6 +180,14 @@ declare class ECS extends Service {
    * Runs a command remotely on a container within a task. If you use a condition key in your IAM policy to refine the conditions for the policy statement, for example limit the actions to a specific cluster, you recevie an AccessDeniedException when there is a mismatch between the condition key value and the corresponding parameter value.
    */
   executeCommand(callback?: (err: AWSError, data: ECS.Types.ExecuteCommandResponse) => void): Request<ECS.Types.ExecuteCommandResponse, AWSError>;
+  /**
+   * Retrieves the protection status of tasks in an Amazon ECS service.
+   */
+  getTaskProtection(params: ECS.Types.GetTaskProtectionRequest, callback?: (err: AWSError, data: ECS.Types.GetTaskProtectionResponse) => void): Request<ECS.Types.GetTaskProtectionResponse, AWSError>;
+  /**
+   * Retrieves the protection status of tasks in an Amazon ECS service.
+   */
+  getTaskProtection(callback?: (err: AWSError, data: ECS.Types.GetTaskProtectionResponse) => void): Request<ECS.Types.GetTaskProtectionResponse, AWSError>;
   /**
    * Lists the account settings for a specified principal.
    */
@@ -420,6 +428,14 @@ declare class ECS extends Service {
    * Modifies which task set in a service is the primary task set. Any parameters that are updated on the primary task set in a service will transition to the service. This is used when a service uses the EXTERNAL deployment controller type. For more information, see Amazon ECS Deployment Types in the Amazon Elastic Container Service Developer Guide.
    */
   updateServicePrimaryTaskSet(callback?: (err: AWSError, data: ECS.Types.UpdateServicePrimaryTaskSetResponse) => void): Request<ECS.Types.UpdateServicePrimaryTaskSetResponse, AWSError>;
+  /**
+   * Updates the protection status of a task. You can set protectionEnabled to true to protect your task from termination during scale-in events from Service Autoscaling or deployments. Task-protection, by default, expires after 2 hours at which point Amazon ECS unsets the protectionEnabled property making the task eligible for termination by a subsequent scale-in event. You can specify a custom expiration period for task protection from 1 minute to up to 2,880 minutes (48 hours). To specify the custom expiration period, set the expiresInMinutes property. The expiresInMinutes property is always reset when you invoke this operation for a task that already has protectionEnabled set to true. You can keep extending the protection expiration period of a task by invoking this operation repeatedly. To learn more about Amazon ECS task protection, see Task scale-in protection in the Amazon Elastic Container Service Developer Guide.  This operation is only supported for tasks belonging to an Amazon ECS service. Invoking this operation for a standalone task will result in an TASK_NOT_VALID failure. For more information, see API failure reasons.   If you prefer to set task protection from within the container, we recommend using the Amazon ECS container agent endpoint. 
+   */
+  updateTaskProtection(params: ECS.Types.UpdateTaskProtectionRequest, callback?: (err: AWSError, data: ECS.Types.UpdateTaskProtectionResponse) => void): Request<ECS.Types.UpdateTaskProtectionResponse, AWSError>;
+  /**
+   * Updates the protection status of a task. You can set protectionEnabled to true to protect your task from termination during scale-in events from Service Autoscaling or deployments. Task-protection, by default, expires after 2 hours at which point Amazon ECS unsets the protectionEnabled property making the task eligible for termination by a subsequent scale-in event. You can specify a custom expiration period for task protection from 1 minute to up to 2,880 minutes (48 hours). To specify the custom expiration period, set the expiresInMinutes property. The expiresInMinutes property is always reset when you invoke this operation for a task that already has protectionEnabled set to true. You can keep extending the protection expiration period of a task by invoking this operation repeatedly. To learn more about Amazon ECS task protection, see Task scale-in protection in the Amazon Elastic Container Service Developer Guide.  This operation is only supported for tasks belonging to an Amazon ECS service. Invoking this operation for a standalone task will result in an TASK_NOT_VALID failure. For more information, see API failure reasons.   If you prefer to set task protection from within the container, we recommend using the Amazon ECS container agent endpoint. 
+   */
+  updateTaskProtection(callback?: (err: AWSError, data: ECS.Types.UpdateTaskProtectionResponse) => void): Request<ECS.Types.UpdateTaskProtectionResponse, AWSError>;
   /**
    * Modifies a task set. This is used when a service uses the EXTERNAL deployment controller type. For more information, see Amazon ECS Deployment Types in the Amazon Elastic Container Service Developer Guide.
    */
@@ -1952,6 +1968,26 @@ declare namespace ECS {
   }
   export type FirelensConfigurationOptionsMap = {[key: string]: String};
   export type FirelensConfigurationType = "fluentd"|"fluentbit"|string;
+  export interface GetTaskProtectionRequest {
+    /**
+     * The short name or full Amazon Resource Name (ARN) of the cluster that hosts the service that the task sets exist in.
+     */
+    cluster: String;
+    /**
+     * A list of up to 100 task IDs or full ARN entries.
+     */
+    tasks?: StringList;
+  }
+  export interface GetTaskProtectionResponse {
+    /**
+     * A list of tasks with the following information.    taskArn: The task ARN.    protectionEnabled: The protection status of the task. If scale-in protection is enabled for a task, the value is true. Otherwise, it is false.    expirationDate: The epoch time when protection for the task will expire.  
+     */
+    protectedTasks?: ProtectedTasks;
+    /**
+     * Any failures associated with the call.
+     */
+    failures?: Failures;
+  }
   export type GpuIds = String[];
   export interface HealthCheck {
     /**
@@ -2450,11 +2486,11 @@ declare namespace ECS {
      */
     targetCapacity?: ManagedScalingTargetCapacity;
     /**
-     * The minimum number of container instances that Amazon ECS scales in or scales out at one time. If this parameter is omitted, the default value of 1 is used.
+     * The minimum number of Amazon EC2 instances that Amazon ECS will scale out at one time. The scale in process is not affected by this parameter If this parameter is omitted, the default value of 1 is used. When additional capacity is required, Amazon ECS will scale up the minimum scaling step size even if the actual demand is less than the minimum scaling step size. If you use a capacity provider with an Auto Scaling group configured with more than one Amazon EC2 instance type or Availability Zone, Amazon ECS will scale up by the exact minimum scaling step size value and will ignore both the maximum scaling step size as well as the capacity demand.
      */
     minimumScalingStepSize?: ManagedScalingStepSize;
     /**
-     * The maximum number of container instances that Amazon ECS scales in or scales out at one time. If this parameter is omitted, the default value of 10000 is used.
+     * The maximum number of Amazon EC2 instances that Amazon ECS will scale out at one time. The scale in process is not affected by this parameter. If this parameter is omitted, the default value of 10000 is used.
      */
     maximumScalingStepSize?: ManagedScalingStepSize;
     /**
@@ -2567,7 +2603,7 @@ declare namespace ECS {
      */
     containerPort?: BoxedInteger;
     /**
-     * The port number on the container instance to reserve for your container. If you use containers in a task with the awsvpc or host network mode, the hostPort can either be left blank or set to the same value as the containerPort. If you use containers in a task with the bridge network mode, you can specify a non-reserved host port for your container port mapping, or you can omit the hostPort (or set it to 0) while specifying a containerPort and your container automatically receives a port in the ephemeral port range for your container instance operating system and Docker version. The default ephemeral port range for Docker version 1.6.0 and later is listed on the instance under /proc/sys/net/ipv4/ip_local_port_range. If this kernel parameter is unavailable, the default ephemeral port range from 49153 through 65535 is used. Do not attempt to specify a host port in the ephemeral port range as these are reserved for automatic assignment. In general, ports below 32768 are outside of the ephemeral port range.  The default ephemeral port range from 49153 through 65535 is always used for Docker versions before 1.6.0.  The default reserved ports are 22 for SSH, the Docker ports 2375 and 2376, and the Amazon ECS container agent ports 51678-51680. Any host port that was previously specified in a running task is also reserved while the task is running. That is, after a task stops, the host port is released. The current reserved ports are displayed in the remainingResources of DescribeContainerInstances output. A container instance can have up to 100 reserved ports at a time. This number includes the default reserved ports. Automatically assigned ports aren't included in the 100 reserved ports quota.
+     * The port number on the container instance to reserve for your container. If you use containers in a task with the awsvpc or host network mode, the hostPort can either be left blank or set to the same value as the containerPort. If you use containers in a task with the bridge network mode, you can specify a non-reserved host port for your container port mapping, or you can omit the hostPort (or set it to 0) while specifying a containerPort and your container automatically receives a port in the ephemeral port range for your container instance operating system and Docker version. The default ephemeral port range for Docker version 1.6.0 and later is listed on the instance under /proc/sys/net/ipv4/ip_local_port_range. If this kernel parameter is unavailable, the default ephemeral port range from 49153 through 65535 is used. Do not attempt to specify a host port in the ephemeral port range as these are reserved for automatic assignment. In general, ports below 32768 are outside of the ephemeral port range. The default reserved ports are 22 for SSH, the Docker ports 2375 and 2376, and the Amazon ECS container agent ports 51678-51680. Any host port that was previously specified in a running task is also reserved while the task is running. That is, after a task stops, the host port is released. The current reserved ports are displayed in the remainingResources of DescribeContainerInstances output. A container instance can have up to 100 reserved ports at a time. This number includes the default reserved ports. Automatically assigned ports aren't included in the 100 reserved ports quota.
      */
     hostPort?: BoxedInteger;
     /**
@@ -2577,6 +2613,21 @@ declare namespace ECS {
   }
   export type PortMappingList = PortMapping[];
   export type PropagateTags = "TASK_DEFINITION"|"SERVICE"|"NONE"|string;
+  export interface ProtectedTask {
+    /**
+     * The task ARN.
+     */
+    taskArn?: String;
+    /**
+     * The protection status of the task. If scale-in protection is enabled for a task, the value is true. Otherwise, it is false.
+     */
+    protectionEnabled?: Boolean;
+    /**
+     * The epoch time when protection for the task will expire.
+     */
+    expirationDate?: Timestamp;
+  }
+  export type ProtectedTasks = ProtectedTask[];
   export interface ProxyConfiguration {
     /**
      * The proxy type. The only supported value is APPMESH.
@@ -2595,7 +2646,7 @@ declare namespace ECS {
   export type ProxyConfigurationType = "APPMESH"|string;
   export interface PutAccountSettingDefaultRequest {
     /**
-     * The resource name for which to modify the account setting. If serviceLongArnFormat is specified, the ARN for your Amazon ECS services is affected. If taskLongArnFormat is specified, the ARN and resource ID for your Amazon ECS tasks is affected. If containerInstanceLongArnFormat is specified, the ARN and resource ID for your Amazon ECS container instances is affected. If awsvpcTrunking is specified, the ENI limit for your Amazon ECS container instances is affected. If containerInsights is specified, the default setting for CloudWatch Container Insights for your clusters is affected.
+     * The resource name for which to modify the account setting. If serviceLongArnFormat is specified, the ARN for your Amazon ECS services is affected. If taskLongArnFormat is specified, the ARN and resource ID for your Amazon ECS tasks is affected. If containerInstanceLongArnFormat is specified, the ARN and resource ID for your Amazon ECS container instances is affected. If awsvpcTrunking is specified, the ENI limit for your Amazon ECS container instances is affected. If containerInsights is specified, the default setting for CloudWatch Container Insights for your clusters is affected. Fargate is transitioning from task count-based quotas to vCPU-based quotas. You can set the name to fargateVCPULimit to opt in or opt out of the vCPU-based quotas. For information about the opt in timeline, see Fargate vCPU-based quotas timeline in the Amazon ECS Developer Guide.
      */
     name: SettingName;
     /**
@@ -2771,7 +2822,7 @@ declare namespace ECS {
      */
     inferenceAccelerators?: InferenceAccelerators;
     /**
-     * The amount of ephemeral storage to allocate for the task. This parameter is used to expand the total amount of ephemeral storage available, beyond the default amount, for tasks hosted on Fargate. For more information, see Fargate task storage in the Amazon ECS User Guide for Fargate.  This parameter is only supported for tasks hosted on Fargate using the following platform versions:   Linux platform version 1.4.0 or later.   Windows platform version 1.0.0 or later.   
+     * The amount of ephemeral storage to allocate for the task. This parameter is used to expand the total amount of ephemeral storage available, beyond the default amount, for tasks hosted on Fargate. For more information, see Fargate task storage in the Amazon ECS User Guide for Fargate.  This parameter is only supported for tasks hosted on Fargate using the following platform versions:   Linux platform version 1.4.0 or later.   
      */
     ephemeralStorage?: EphemeralStorage;
     /**
@@ -3052,7 +3103,7 @@ declare namespace ECS {
      */
     schedulingStrategy?: SchedulingStrategy;
     /**
-     * The deployment controller type the service is using. When using the DescribeServices API, this field is omitted if the service uses the ECS deployment controller type.
+     * The deployment controller type the service is using. 
      */
     deploymentController?: DeploymentController;
     /**
@@ -3547,7 +3598,7 @@ declare namespace ECS {
      */
     revision?: Integer;
     /**
-     * The list of data volume definitions for the task. For more information, see Using data volumes in tasks in the Amazon Elastic Container Service Developer Guide.  The host and sourcePath parameters aren't supported for tasks run on Fargate. 
+     * The list of data volume definitions for the task. For more information, see Using data volumes in tasks in the Amazon Elastic Container Service Developer Guide.  The host and sourcePath parameters aren't supported for tasks run on Fargate.  
      */
     volumes?: VolumeList;
     /**
@@ -3999,6 +4050,34 @@ declare namespace ECS {
      */
     service?: Service;
   }
+  export interface UpdateTaskProtectionRequest {
+    /**
+     * The short name or full Amazon Resource Name (ARN) of the cluster that hosts the service that the task sets exist in.
+     */
+    cluster: String;
+    /**
+     * A list of up to 10 task IDs or full ARN entries.
+     */
+    tasks: StringList;
+    /**
+     * Specify true to mark a task for protection and false to unset protection, making it eligible for termination.
+     */
+    protectionEnabled: Boolean;
+    /**
+     * If you set protectionEnabled to true, you can specify the duration for task protection in minutes. You can specify a value from 1 minute to up to 2,880 minutes (48 hours). During this time, your task will not be terminated by scale-in events from Service Auto Scaling or deployments. After this time period lapses, protectionEnabled will be reset to false. If you don’t specify the time, then the task is automatically protected for 120 minutes (2 hours).
+     */
+    expiresInMinutes?: BoxedInteger;
+  }
+  export interface UpdateTaskProtectionResponse {
+    /**
+     * A list of tasks with the following information.    taskArn: The task ARN.    protectionEnabled: The protection status of the task. If scale-in protection is enabled for a task, the value is true. Otherwise, it is false.    expirationDate: The epoch time when protection for the task will expire.  
+     */
+    protectedTasks?: ProtectedTasks;
+    /**
+     * Any failures associated with the call.
+     */
+    failures?: Failures;
+  }
   export interface UpdateTaskSetRequest {
     /**
      * The short name or full Amazon Resource Name (ARN) of the cluster that hosts the service that the task set is found in.

package/node_modules/aws-sdk/clients/eks.d.ts

@@ -29,11 +29,11 @@ declare class EKS extends Service {
    */
   associateIdentityProviderConfig(callback?: (err: AWSError, data: EKS.Types.AssociateIdentityProviderConfigResponse) => void): Request<EKS.Types.AssociateIdentityProviderConfigResponse, AWSError>;
   /**
-   * Creates an Amazon EKS add-on. Amazon EKS add-ons help to automate the provisioning and lifecycle management of common operational software for Amazon EKS clusters. Amazon EKS add-ons require clusters running version 1.18 or later because Amazon EKS add-ons rely on the Server-side Apply Kubernetes feature, which is only available in Kubernetes 1.18 and later. For more information, see Amazon EKS add-ons in the Amazon EKS User Guide.
+   * Creates an Amazon EKS add-on. Amazon EKS add-ons help to automate the provisioning and lifecycle management of common operational software for Amazon EKS clusters. For more information, see Amazon EKS add-ons in the Amazon EKS User Guide.
    */
   createAddon(params: EKS.Types.CreateAddonRequest, callback?: (err: AWSError, data: EKS.Types.CreateAddonResponse) => void): Request<EKS.Types.CreateAddonResponse, AWSError>;
   /**
-   * Creates an Amazon EKS add-on. Amazon EKS add-ons help to automate the provisioning and lifecycle management of common operational software for Amazon EKS clusters. Amazon EKS add-ons require clusters running version 1.18 or later because Amazon EKS add-ons rely on the Server-side Apply Kubernetes feature, which is only available in Kubernetes 1.18 and later. For more information, see Amazon EKS add-ons in the Amazon EKS User Guide.
+   * Creates an Amazon EKS add-on. Amazon EKS add-ons help to automate the provisioning and lifecycle management of common operational software for Amazon EKS clusters. For more information, see Amazon EKS add-ons in the Amazon EKS User Guide.
    */
   createAddon(callback?: (err: AWSError, data: EKS.Types.CreateAddonResponse) => void): Request<EKS.Types.CreateAddonResponse, AWSError>;
   /**
@@ -660,6 +660,18 @@ declare namespace EKS {
      */
     roleArn?: String;
   }
+  export interface ControlPlanePlacementRequest {
+    /**
+     * The name of the placement group for the Kubernetes control plane instances. This setting can't be changed after cluster creation. 
+     */
+    groupName?: String;
+  }
+  export interface ControlPlanePlacementResponse {
+    /**
+     * The name of the placement group for the Kubernetes control plane instances.
+     */
+    groupName?: String;
+  }
   export interface CreateAddonRequest {
     /**
      * The name of the cluster to create the add-on for.
@@ -731,7 +743,7 @@ declare namespace EKS {
      */
     encryptionConfig?: EncryptionConfigList;
     /**
-     * An object representing the configuration of your local Amazon EKS cluster on an Amazon Web Services Outpost. Before creating a local cluster on an Outpost, review Creating an Amazon EKS cluster on an Amazon Web Services Outpost in the Amazon EKS User Guide. This object isn't available for creating Amazon EKS clusters on the Amazon Web Services cloud.
+     * An object representing the configuration of your local Amazon EKS cluster on an Amazon Web Services Outpost. Before creating a local cluster on an Outpost, review Local clusters for Amazon EKS on Amazon Web Services Outposts in the Amazon EKS User Guide. This object isn't available for creating Amazon EKS clusters on the Amazon Web Services cloud.
      */
     outpostConfig?: OutpostConfigRequest;
   }
@@ -1219,7 +1231,7 @@ declare namespace EKS {
      */
     name?: String;
     /**
-     * The launch template version number, $Latest, or $Default. If the value is $Latest, Amazon EKS uses the latest version of the launch template. If the value is $Default, Amazon EKS uses the default version of the launch template. Default: The default version of the launch template.
+     * The version number of the launch template to use. If no version is specified, then the template's default version is used.
      */
     version?: String;
     /**
@@ -1648,9 +1660,13 @@ declare namespace EKS {
      */
     outpostArns: StringList;
     /**
-     * The Amazon EC2 instance type that you want to use for your local Amazon EKS cluster on Outposts. The instance type that you specify is used for all Kubernetes control plane instances. The instance type can't be changed after cluster creation. Choose an instance type based on the number of nodes that your cluster will have. If your cluster will have:   1–20 nodes, then we recommend specifying a large instance type.   21–100 nodes, then we recommend specifying an xlarge instance type.   101–250 nodes, then we recommend specifying a 2xlarge instance type.   For a list of the available Amazon EC2 instance types, see Compute and storage in Outposts rack features. The control plane is not automatically scaled by Amazon EKS.
+     * The Amazon EC2 instance type that you want to use for your local Amazon EKS cluster on Outposts. Choose an instance type based on the number of nodes that your cluster will have. For more information, see Capacity considerations in the Amazon EKS User Guide. The instance type that you specify is used for all Kubernetes control plane instances. The instance type can't be changed after cluster creation. The control plane is not automatically scaled by Amazon EKS.  
      */
     controlPlaneInstanceType: String;
+    /**
+     * An object representing the placement configuration for all the control plane instance of your local Amazon EKS cluster on an Amazon Web Services Outpost. For more information, see Capacity considerations in the Amazon EKS User Guide.
+     */
+    controlPlanePlacement?: ControlPlanePlacementRequest;
   }
   export interface OutpostConfigResponse {
     /**
@@ -1661,6 +1677,10 @@ declare namespace EKS {
      * The Amazon EC2 instance type used for the control plane. The instance type is the same for all control plane instances.
      */
     controlPlaneInstanceType: String;
+    /**
+     * An object representing the placement configuration for all the control plane instance of your local Amazon EKS cluster on an Amazon Web Services Outpost. For more information, see Capacity considerations in the Amazon EKS User Guide.
+     */
+    controlPlanePlacement?: ControlPlanePlacementResponse;
   }
   export type PercentCapacity = number;
   export interface Provider {
@@ -1947,7 +1967,7 @@ declare namespace EKS {
      */
     subnetIds?: StringList;
     /**
-     * Specify one or more security groups for the cross-account elastic network interfaces that Amazon EKS creates to use that allow communication between your nodes and the Kubernetes control plane. If you don't specify any security groups, then familiarize yourself with the difference between Amazon EKS defaults for clusters deployed with Kubernetes:   1.14 Amazon EKS platform version eks.2 and earlier   1.14 Amazon EKS platform version eks.3 and later    For more information, see Amazon EKS security group considerations in the  Amazon EKS User Guide .
+     * Specify one or more security groups for the cross-account elastic network interfaces that Amazon EKS creates to use that allow communication between your nodes and the Kubernetes control plane. If you don't specify any security groups, then familiarize yourself with the difference between Amazon EKS defaults for clusters deployed with Kubernetes. For more information, see Amazon EKS security group considerations in the  Amazon EKS User Guide .
      */
     securityGroupIds?: StringList;
     /**

package/node_modules/aws-sdk/clients/elasticache.d.ts

@@ -365,11 +365,11 @@ declare class ElastiCache extends Service {
    */
   disassociateGlobalReplicationGroup(callback?: (err: AWSError, data: ElastiCache.Types.DisassociateGlobalReplicationGroupResult) => void): Request<ElastiCache.Types.DisassociateGlobalReplicationGroupResult, AWSError>;
   /**
-   * Used to failover the primary region to a selected secondary region. The selected secondary region will become primary, and all other clusters will become secondary.
+   * Used to failover the primary region to a secondary region. The secondary region will become primary, and all other clusters will become secondary.
    */
   failoverGlobalReplicationGroup(params: ElastiCache.Types.FailoverGlobalReplicationGroupMessage, callback?: (err: AWSError, data: ElastiCache.Types.FailoverGlobalReplicationGroupResult) => void): Request<ElastiCache.Types.FailoverGlobalReplicationGroupResult, AWSError>;
   /**
-   * Used to failover the primary region to a selected secondary region. The selected secondary region will become primary, and all other clusters will become secondary.
+   * Used to failover the primary region to a secondary region. The secondary region will become primary, and all other clusters will become secondary.
    */
   failoverGlobalReplicationGroup(callback?: (err: AWSError, data: ElastiCache.Types.FailoverGlobalReplicationGroupResult) => void): Request<ElastiCache.Types.FailoverGlobalReplicationGroupResult, AWSError>;
   /**
@@ -601,7 +601,17 @@ declare namespace ElastiCache {
      */
     PasswordCount?: IntegerOptional;
   }
-  export type AuthenticationType = "password"|"no-password"|string;
+  export interface AuthenticationMode {
+    /**
+     * Specifies the authentication type. Possible options are IAM authentication, password and no password.
+     */
+    Type?: InputAuthenticationType;
+    /**
+     * Specifies the passwords to use for authentication if Type is set to password.
+     */
+    Passwords?: PasswordListInput;
+  }
+  export type AuthenticationType = "password"|"no-password"|"iam"|string;
   export interface AuthorizeCacheSecurityGroupIngressMessage {
     /**
      * The cache security group that allows network ingress.
@@ -671,7 +681,7 @@ declare namespace ElastiCache {
      */
     ClientDownloadLandingPage?: String;
     /**
-     * The name of the compute and memory capacity node type for the cluster. The following node types are supported by ElastiCache. Generally speaking, the current generation types provide more memory and computational power at lower cost when compared to their equivalent previous generation counterparts.   General purpose:   Current generation:   M6g node types: (available only for Redis engine version 5.0.6 onward and for Memcached engine version 1.5.16 onward): cache.m6g.large, cache.m6g.xlarge, cache.m6g.2xlarge, cache.m6g.4xlarge, cache.m6g.8xlarge, cache.m6g.12xlarge, cache.m6g.16xlarge   For region availability, see Supported Node Types    M5 node types: cache.m5.large, cache.m5.xlarge, cache.m5.2xlarge, cache.m5.4xlarge, cache.m5.12xlarge, cache.m5.24xlarge   M4 node types: cache.m4.large, cache.m4.xlarge, cache.m4.2xlarge, cache.m4.4xlarge, cache.m4.10xlarge   T4g node types (available only for Redis engine version 5.0.6 onward and for Memcached engine version 1.5.16 onward): cache.t4g.micro, cache.t4g.small, cache.t4g.medium   T3 node types: cache.t3.micro, cache.t3.small, cache.t3.medium   T2 node types: cache.t2.micro, cache.t2.small, cache.t2.medium    Previous generation: (not recommended. Existing clusters are still supported but creation of new clusters is not supported for these types.)  T1 node types: cache.t1.micro   M1 node types: cache.m1.small, cache.m1.medium, cache.m1.large, cache.m1.xlarge   M3 node types: cache.m3.medium, cache.m3.large, cache.m3.xlarge, cache.m3.2xlarge      Compute optimized:   Previous generation: (not recommended. Existing clusters are still supported but creation of new clusters is not supported for these types.)  C1 node types: cache.c1.xlarge      Memory optimized with data tiering:   Current generation:   R6gd node types (available only for Redis engine version 6.2 onward).  cache.r6gd.xlarge, cache.r6gd.2xlarge, cache.r6gd.4xlarge, cache.r6gd.8xlarge, cache.r6gd.12xlarge, cache.r6gd.16xlarge      Memory optimized:   Current generation:   R6g node types (available only for Redis engine version 5.0.6 onward and for Memcached engine version 1.5.16 onward).  cache.r6g.large, cache.r6g.xlarge, cache.r6g.2xlarge, cache.r6g.4xlarge, cache.r6g.8xlarge, cache.r6g.12xlarge, cache.r6g.16xlarge   For region availability, see Supported Node Types    R5 node types: cache.r5.large, cache.r5.xlarge, cache.r5.2xlarge, cache.r5.4xlarge, cache.r5.12xlarge, cache.r5.24xlarge   R4 node types: cache.r4.large, cache.r4.xlarge, cache.r4.2xlarge, cache.r4.4xlarge, cache.r4.8xlarge, cache.r4.16xlarge    Previous generation: (not recommended. Existing clusters are still supported but creation of new clusters is not supported for these types.)  M2 node types: cache.m2.xlarge, cache.m2.2xlarge, cache.m2.4xlarge   R3 node types: cache.r3.large, cache.r3.xlarge, cache.r3.2xlarge, cache.r3.4xlarge, cache.r3.8xlarge       Additional node type info    All current generation instance types are created in Amazon VPC by default.   Redis append-only files (AOF) are not supported for T1 or T2 instances.   Redis Multi-AZ with automatic failover is not supported on T1 instances.   Redis configuration variables appendonly and appendfsync are not supported on Redis version 2.8.22 and later.  
+     * The name of the compute and memory capacity node type for the cluster. The following node types are supported by ElastiCache. Generally speaking, the current generation types provide more memory and computational power at lower cost when compared to their equivalent previous generation counterparts.   General purpose:   Current generation:   M6g node types (available only for Redis engine version 5.0.6 onward and for Memcached engine version 1.5.16 onward): cache.m6g.large, cache.m6g.xlarge, cache.m6g.2xlarge, cache.m6g.4xlarge, cache.m6g.8xlarge, cache.m6g.12xlarge, cache.m6g.16xlarge   For region availability, see Supported Node Types    M5 node types: cache.m5.large, cache.m5.xlarge, cache.m5.2xlarge, cache.m5.4xlarge, cache.m5.12xlarge, cache.m5.24xlarge   M4 node types: cache.m4.large, cache.m4.xlarge, cache.m4.2xlarge, cache.m4.4xlarge, cache.m4.10xlarge   T4g node types (available only for Redis engine version 5.0.6 onward and Memcached engine version 1.5.16 onward): cache.t4g.micro, cache.t4g.small, cache.t4g.medium   T3 node types: cache.t3.micro, cache.t3.small, cache.t3.medium   T2 node types: cache.t2.micro, cache.t2.small, cache.t2.medium    Previous generation: (not recommended. Existing clusters are still supported but creation of new clusters is not supported for these types.)  T1 node types: cache.t1.micro   M1 node types: cache.m1.small, cache.m1.medium, cache.m1.large, cache.m1.xlarge   M3 node types: cache.m3.medium, cache.m3.large, cache.m3.xlarge, cache.m3.2xlarge      Compute optimized:   Previous generation: (not recommended. Existing clusters are still supported but creation of new clusters is not supported for these types.)  C1 node types: cache.c1.xlarge      Memory optimized:   Current generation:   R6g node types (available only for Redis engine version 5.0.6 onward and for Memcached engine version 1.5.16 onward).  cache.r6g.large, cache.r6g.xlarge, cache.r6g.2xlarge, cache.r6g.4xlarge, cache.r6g.8xlarge, cache.r6g.12xlarge, cache.r6g.16xlarge   For region availability, see Supported Node Types    R5 node types: cache.r5.large, cache.r5.xlarge, cache.r5.2xlarge, cache.r5.4xlarge, cache.r5.12xlarge, cache.r5.24xlarge   R4 node types: cache.r4.large, cache.r4.xlarge, cache.r4.2xlarge, cache.r4.4xlarge, cache.r4.8xlarge, cache.r4.16xlarge    Previous generation: (not recommended. Existing clusters are still supported but creation of new clusters is not supported for these types.)  M2 node types: cache.m2.xlarge, cache.m2.2xlarge, cache.m2.4xlarge   R3 node types: cache.r3.large, cache.r3.xlarge, cache.r3.2xlarge, cache.r3.4xlarge, cache.r3.8xlarge       Additional node type info    All current generation instance types are created in Amazon VPC by default.   Redis append-only files (AOF) are not supported for T1 or T2 instances.   Redis Multi-AZ with automatic failover is not supported on T1 instances.   Redis configuration variables appendonly and appendfsync are not supported on Redis version 2.8.22 and later.  
      */
     CacheNodeType?: String;
     /**
@@ -775,6 +785,14 @@ declare namespace ElastiCache {
      * Returns the destination, format and type of the logs.
      */
     LogDeliveryConfigurations?: LogDeliveryConfigurationList;
+    /**
+     * Must be either ipv4 | ipv6 | dual_stack. IPv6 is supported for workloads using Redis engine version 6.2 onward or Memcached engine version 1.6.6 on all instances built on the Nitro system.
+     */
+    NetworkType?: NetworkType;
+    /**
+     * The network type associated with the cluster, either ipv4 | ipv6. IPv6 is supported for workloads using Redis engine version 6.2 onward or Memcached engine version 1.6.6 on all instances built on the Nitro system.
+     */
+    IpDiscovery?: IpDiscovery;
   }
   export type CacheClusterIdList = String[];
   export type CacheClusterList = CacheCluster[];
@@ -1075,6 +1093,10 @@ declare namespace ElastiCache {
      * The ARN (Amazon Resource Name) of the cache subnet group.
      */
     ARN?: String;
+    /**
+     * Either ipv4 | ipv6 | dual_stack. IPv6 is supported for workloads using Redis engine version 6.2 onward or Memcached engine version 1.6.6 on all instances built on the Nitro system.
+     */
+    SupportedNetworkTypes?: NetworkTypeList;
   }
   export interface CacheSubnetGroupMessage {
     /**
@@ -1261,9 +1283,17 @@ declare namespace ElastiCache {
      */
     LogDeliveryConfigurations?: LogDeliveryConfigurationRequestList;
     /**
-     * A flag that enables in-transit encryption when set to true. You cannot modify the value of TransitEncryptionEnabled after the cluster is created. To enable in-transit encryption on a cluster you must set TransitEncryptionEnabled to true when you create a cluster.   Required: Only available when creating a cache cluster in an Amazon VPC using Memcached version 1.6.12 or later.
+     * A flag that enables in-transit encryption when set to true. You cannot modify the value of TransitEncryptionEnabled after the cluster is created. To enable in-transit encryption on a cluster you must set TransitEncryptionEnabled to true when you create a cluster.  Only available when creating a cache cluster in an Amazon VPC using Memcached version 1.6.12 or later.
      */
     TransitEncryptionEnabled?: BooleanOptional;
+    /**
+     * Must be either ipv4 | ipv6 | dual_stack. IPv6 is supported for workloads using Redis engine version 6.2 onward or Memcached engine version 1.6.6 on all instances built on the Nitro system. 
+     */
+    NetworkType?: NetworkType;
+    /**
+     * The network type you choose when modifying a cluster, either ipv4 | ipv6. IPv6 is supported for workloads using Redis engine version 6.2 onward or Memcached engine version 1.6.6 on all instances built on the Nitro system.
+     */
+    IpDiscovery?: IpDiscovery;
   }
   export interface CreateCacheClusterResult {
     CacheCluster?: CacheCluster;
@@ -1390,7 +1420,7 @@ declare namespace ElastiCache {
      */
     NodeGroupConfiguration?: NodeGroupConfigurationList;
     /**
-     * The compute and memory capacity of the nodes in the node group (shard). The following node types are supported by ElastiCache. Generally speaking, the current generation types provide more memory and computational power at lower cost when compared to their equivalent previous generation counterparts.   General purpose:   Current generation:   M6g node types (available only for Redis engine version 5.0.6 onward and for Memcached engine version 1.5.16 onward): cache.m6g.large, cache.m6g.xlarge, cache.m6g.2xlarge, cache.m6g.4xlarge, cache.m6g.8xlarge, cache.m6g.12xlarge, cache.m6g.16xlarge   For region availability, see Supported Node Types    M5 node types: cache.m5.large, cache.m5.xlarge, cache.m5.2xlarge, cache.m5.4xlarge, cache.m5.12xlarge, cache.m5.24xlarge   M4 node types: cache.m4.large, cache.m4.xlarge, cache.m4.2xlarge, cache.m4.4xlarge, cache.m4.10xlarge   T4g node types (available only for Redis engine version 5.0.6 onward and Memcached engine version 1.5.16 onward): cache.t4g.micro, cache.t4g.small, cache.t4g.medium   T3 node types: cache.t3.micro, cache.t3.small, cache.t3.medium   T2 node types: cache.t2.micro, cache.t2.small, cache.t2.medium    Previous generation: (not recommended. Existing clusters are still supported but creation of new clusters is not supported for these types.)  T1 node types: cache.t1.micro   M1 node types: cache.m1.small, cache.m1.medium, cache.m1.large, cache.m1.xlarge   M3 node types: cache.m3.medium, cache.m3.large, cache.m3.xlarge, cache.m3.2xlarge      Compute optimized:   Previous generation: (not recommended. Existing clusters are still supported but creation of new clusters is not supported for these types.)  C1 node types: cache.c1.xlarge      Memory optimized with data tiering:   Current generation:   R6gd node types (available only for Redis engine version 6.2 onward).  cache.r6gd.xlarge, cache.r6gd.2xlarge, cache.r6gd.4xlarge, cache.r6gd.8xlarge, cache.r6gd.12xlarge, cache.r6gd.16xlarge      Memory optimized:   Current generation:   R6g node types (available only for Redis engine version 5.0.6 onward and for Memcached engine version 1.5.16 onward).  cache.r6g.large, cache.r6g.xlarge, cache.r6g.2xlarge, cache.r6g.4xlarge, cache.r6g.8xlarge, cache.r6g.12xlarge, cache.r6g.16xlarge   For region availability, see Supported Node Types    R5 node types: cache.r5.large, cache.r5.xlarge, cache.r5.2xlarge, cache.r5.4xlarge, cache.r5.12xlarge, cache.r5.24xlarge   R4 node types: cache.r4.large, cache.r4.xlarge, cache.r4.2xlarge, cache.r4.4xlarge, cache.r4.8xlarge, cache.r4.16xlarge    Previous generation: (not recommended. Existing clusters are still supported but creation of new clusters is not supported for these types.)  M2 node types: cache.m2.xlarge, cache.m2.2xlarge, cache.m2.4xlarge   R3 node types: cache.r3.large, cache.r3.xlarge, cache.r3.2xlarge, cache.r3.4xlarge, cache.r3.8xlarge       Additional node type info    All current generation instance types are created in Amazon VPC by default.   Redis append-only files (AOF) are not supported for T1 or T2 instances.   Redis Multi-AZ with automatic failover is not supported on T1 instances.   Redis configuration variables appendonly and appendfsync are not supported on Redis version 2.8.22 and later.  
+     * The compute and memory capacity of the nodes in the node group (shard). The following node types are supported by ElastiCache. Generally speaking, the current generation types provide more memory and computational power at lower cost when compared to their equivalent previous generation counterparts.   General purpose:   Current generation:   M6g node types (available only for Redis engine version 5.0.6 onward and for Memcached engine version 1.5.16 onward): cache.m6g.large, cache.m6g.xlarge, cache.m6g.2xlarge, cache.m6g.4xlarge, cache.m6g.8xlarge, cache.m6g.12xlarge, cache.m6g.16xlarge   For region availability, see Supported Node Types    M5 node types: cache.m5.large, cache.m5.xlarge, cache.m5.2xlarge, cache.m5.4xlarge, cache.m5.12xlarge, cache.m5.24xlarge   M4 node types: cache.m4.large, cache.m4.xlarge, cache.m4.2xlarge, cache.m4.4xlarge, cache.m4.10xlarge   T4g node types (available only for Redis engine version 5.0.6 onward and Memcached engine version 1.5.16 onward): cache.t4g.micro, cache.t4g.small, cache.t4g.medium   T3 node types: cache.t3.micro, cache.t3.small, cache.t3.medium   T2 node types: cache.t2.micro, cache.t2.small, cache.t2.medium    Previous generation: (not recommended. Existing clusters are still supported but creation of new clusters is not supported for these types.)  T1 node types: cache.t1.micro   M1 node types: cache.m1.small, cache.m1.medium, cache.m1.large, cache.m1.xlarge   M3 node types: cache.m3.medium, cache.m3.large, cache.m3.xlarge, cache.m3.2xlarge      Compute optimized:   Previous generation: (not recommended. Existing clusters are still supported but creation of new clusters is not supported for these types.)  C1 node types: cache.c1.xlarge      Memory optimized:   Current generation:   R6g node types (available only for Redis engine version 5.0.6 onward and for Memcached engine version 1.5.16 onward).  cache.r6g.large, cache.r6g.xlarge, cache.r6g.2xlarge, cache.r6g.4xlarge, cache.r6g.8xlarge, cache.r6g.12xlarge, cache.r6g.16xlarge   For region availability, see Supported Node Types    R5 node types: cache.r5.large, cache.r5.xlarge, cache.r5.2xlarge, cache.r5.4xlarge, cache.r5.12xlarge, cache.r5.24xlarge   R4 node types: cache.r4.large, cache.r4.xlarge, cache.r4.2xlarge, cache.r4.4xlarge, cache.r4.8xlarge, cache.r4.16xlarge    Previous generation: (not recommended. Existing clusters are still supported but creation of new clusters is not supported for these types.)  M2 node types: cache.m2.xlarge, cache.m2.2xlarge, cache.m2.4xlarge   R3 node types: cache.r3.large, cache.r3.xlarge, cache.r3.2xlarge, cache.r3.4xlarge, cache.r3.8xlarge       Additional node type info    All current generation instance types are created in Amazon VPC by default.   Redis append-only files (AOF) are not supported for T1 or T2 instances.   Redis Multi-AZ with automatic failover is not supported on T1 instances.   Redis configuration variables appendonly and appendfsync are not supported on Redis version 2.8.22 and later.  
      */
     CacheNodeType?: String;
     /**
@@ -1481,6 +1511,14 @@ declare namespace ElastiCache {
      * Enables data tiering. Data tiering is only supported for replication groups using the r6gd node type. This parameter must be set to true when using r6gd nodes. For more information, see Data tiering.
      */
     DataTieringEnabled?: BooleanOptional;
+    /**
+     * Must be either ipv4 | ipv6 | dual_stack. IPv6 is supported for workloads using Redis engine version 6.2 onward or Memcached engine version 1.6.6 on all instances built on the Nitro system.
+     */
+    NetworkType?: NetworkType;
+    /**
+     * The network type you choose when creating a replication group, either ipv4 | ipv6. IPv6 is supported for workloads using Redis engine version 6.2 onward or Memcached engine version 1.6.6 on all instances built on the Nitro system.
+     */
+    IpDiscovery?: IpDiscovery;
   }
   export interface CreateReplicationGroupResult {
     ReplicationGroup?: ReplicationGroup;
@@ -1557,6 +1595,10 @@ declare namespace ElastiCache {
      * A list of tags to be added to this resource. A tag is a key-value pair. A tag key must be accompanied by a tag value, although null is accepted.
      */
     Tags?: TagList;
+    /**
+     * Specifies how to authenticate the user.
+     */
+    AuthenticationMode?: AuthenticationMode;
   }
   export interface CustomerNodeEndpoint {
     /**
@@ -1909,7 +1951,7 @@ declare namespace ElastiCache {
      */
     ReservedCacheNodesOfferingId?: String;
     /**
-     * The cache node type filter value. Use this parameter to show only those reservations matching the specified cache node type. The following node types are supported by ElastiCache. Generally speaking, the current generation types provide more memory and computational power at lower cost when compared to their equivalent previous generation counterparts.   General purpose:   Current generation:   M6g node types: (available only for Redis engine version 5.0.6 onward and for Memcached engine version 1.5.16 onward): cache.m6g.large, cache.m6g.xlarge, cache.m6g.2xlarge, cache.m6g.4xlarge, cache.m6g.8xlarge, cache.m6g.12xlarge, cache.m6g.16xlarge   For region availability, see Supported Node Types    M5 node types: cache.m5.large, cache.m5.xlarge, cache.m5.2xlarge, cache.m5.4xlarge, cache.m5.12xlarge, cache.m5.24xlarge   M4 node types: cache.m4.large, cache.m4.xlarge, cache.m4.2xlarge, cache.m4.4xlarge, cache.m4.10xlarge   T4g node types (available only for Redis engine version 5.0.6 onward and for Memcached engine version 1.5.16 onward): cache.t4g.micro, cache.t4g.small, cache.t4g.medium   T3 node types: cache.t3.micro, cache.t3.small, cache.t3.medium   T2 node types: cache.t2.micro, cache.t2.small, cache.t2.medium    Previous generation: (not recommended. Existing clusters are still supported but creation of new clusters is not supported for these types.)  T1 node types: cache.t1.micro   M1 node types: cache.m1.small, cache.m1.medium, cache.m1.large, cache.m1.xlarge   M3 node types: cache.m3.medium, cache.m3.large, cache.m3.xlarge, cache.m3.2xlarge      Compute optimized:   Previous generation: (not recommended. Existing clusters are still supported but creation of new clusters is not supported for these types.)  C1 node types: cache.c1.xlarge      Memory optimized with data tiering:   Current generation:   R6gd node types (available only for Redis engine version 6.2 onward).  cache.r6gd.xlarge, cache.r6gd.2xlarge, cache.r6gd.4xlarge, cache.r6gd.8xlarge, cache.r6gd.12xlarge, cache.r6gd.16xlarge      Memory optimized:   Current generation:   R6g node types (available only for Redis engine version 5.0.6 onward and for Memcached engine version 1.5.16 onward).  cache.r6g.large, cache.r6g.xlarge, cache.r6g.2xlarge, cache.r6g.4xlarge, cache.r6g.8xlarge, cache.r6g.12xlarge, cache.r6g.16xlarge   For region availability, see Supported Node Types    R5 node types: cache.r5.large, cache.r5.xlarge, cache.r5.2xlarge, cache.r5.4xlarge, cache.r5.12xlarge, cache.r5.24xlarge   R4 node types: cache.r4.large, cache.r4.xlarge, cache.r4.2xlarge, cache.r4.4xlarge, cache.r4.8xlarge, cache.r4.16xlarge    Previous generation: (not recommended. Existing clusters are still supported but creation of new clusters is not supported for these types.)  M2 node types: cache.m2.xlarge, cache.m2.2xlarge, cache.m2.4xlarge   R3 node types: cache.r3.large, cache.r3.xlarge, cache.r3.2xlarge, cache.r3.4xlarge, cache.r3.8xlarge       Additional node type info    All current generation instance types are created in Amazon VPC by default.   Redis append-only files (AOF) are not supported for T1 or T2 instances.   Redis Multi-AZ with automatic failover is not supported on T1 instances.   Redis configuration variables appendonly and appendfsync are not supported on Redis version 2.8.22 and later.  
+     * The cache node type filter value. Use this parameter to show only those reservations matching the specified cache node type. The following node types are supported by ElastiCache. Generally speaking, the current generation types provide more memory and computational power at lower cost when compared to their equivalent previous generation counterparts.   General purpose:   Current generation:   M6g node types (available only for Redis engine version 5.0.6 onward and for Memcached engine version 1.5.16 onward): cache.m6g.large, cache.m6g.xlarge, cache.m6g.2xlarge, cache.m6g.4xlarge, cache.m6g.8xlarge, cache.m6g.12xlarge, cache.m6g.16xlarge   For region availability, see Supported Node Types    M5 node types: cache.m5.large, cache.m5.xlarge, cache.m5.2xlarge, cache.m5.4xlarge, cache.m5.12xlarge, cache.m5.24xlarge   M4 node types: cache.m4.large, cache.m4.xlarge, cache.m4.2xlarge, cache.m4.4xlarge, cache.m4.10xlarge   T4g node types (available only for Redis engine version 5.0.6 onward and Memcached engine version 1.5.16 onward): cache.t4g.micro, cache.t4g.small, cache.t4g.medium   T3 node types: cache.t3.micro, cache.t3.small, cache.t3.medium   T2 node types: cache.t2.micro, cache.t2.small, cache.t2.medium    Previous generation: (not recommended. Existing clusters are still supported but creation of new clusters is not supported for these types.)  T1 node types: cache.t1.micro   M1 node types: cache.m1.small, cache.m1.medium, cache.m1.large, cache.m1.xlarge   M3 node types: cache.m3.medium, cache.m3.large, cache.m3.xlarge, cache.m3.2xlarge      Compute optimized:   Previous generation: (not recommended. Existing clusters are still supported but creation of new clusters is not supported for these types.)  C1 node types: cache.c1.xlarge      Memory optimized:   Current generation:   R6g node types (available only for Redis engine version 5.0.6 onward and for Memcached engine version 1.5.16 onward).  cache.r6g.large, cache.r6g.xlarge, cache.r6g.2xlarge, cache.r6g.4xlarge, cache.r6g.8xlarge, cache.r6g.12xlarge, cache.r6g.16xlarge   For region availability, see Supported Node Types    R5 node types: cache.r5.large, cache.r5.xlarge, cache.r5.2xlarge, cache.r5.4xlarge, cache.r5.12xlarge, cache.r5.24xlarge   R4 node types: cache.r4.large, cache.r4.xlarge, cache.r4.2xlarge, cache.r4.4xlarge, cache.r4.8xlarge, cache.r4.16xlarge    Previous generation: (not recommended. Existing clusters are still supported but creation of new clusters is not supported for these types.)  M2 node types: cache.m2.xlarge, cache.m2.2xlarge, cache.m2.4xlarge   R3 node types: cache.r3.large, cache.r3.xlarge, cache.r3.2xlarge, cache.r3.4xlarge, cache.r3.8xlarge       Additional node type info    All current generation instance types are created in Amazon VPC by default.   Redis append-only files (AOF) are not supported for T1 or T2 instances.   Redis Multi-AZ with automatic failover is not supported on T1 instances.   Redis configuration variables appendonly and appendfsync are not supported on Redis version 2.8.22 and later.  
      */
     CacheNodeType?: String;
     /**
@@ -1939,7 +1981,7 @@ declare namespace ElastiCache {
      */
     ReservedCacheNodesOfferingId?: String;
     /**
-     * The cache node type filter value. Use this parameter to show only the available offerings matching the specified cache node type. The following node types are supported by ElastiCache. Generally speaking, the current generation types provide more memory and computational power at lower cost when compared to their equivalent previous generation counterparts.   General purpose:   Current generation:   M6g node types: (available only for Redis engine version 5.0.6 onward and for Memcached engine version 1.5.16 onward) cache.m6g.large, cache.m6g.xlarge, cache.m6g.2xlarge, cache.m6g.4xlarge, cache.m6g.8xlarge, cache.m6g.12xlarge, cache.m6g.16xlarge   For region availability, see Supported Node Types    M5 node types: cache.m5.large, cache.m5.xlarge, cache.m5.2xlarge, cache.m5.4xlarge, cache.m5.12xlarge, cache.m5.24xlarge   M4 node types: cache.m4.large, cache.m4.xlarge, cache.m4.2xlarge, cache.m4.4xlarge, cache.m4.10xlarge   T4g node types (available only for Redis engine version 5.0.6 onward and for Memcached engine version 1.5.16 onward): cache.t4g.micro, cache.t4g.small, cache.t4g.medium   T3 node types: cache.t3.micro, cache.t3.small, cache.t3.medium   T2 node types: cache.t2.micro, cache.t2.small, cache.t2.medium    Previous generation: (not recommended. Existing clusters are still supported but creation of new clusters is not supported for these types.)  T1 node types: cache.t1.micro   M1 node types: cache.m1.small, cache.m1.medium, cache.m1.large, cache.m1.xlarge   M3 node types: cache.m3.medium, cache.m3.large, cache.m3.xlarge, cache.m3.2xlarge      Compute optimized:   Previous generation: (not recommended. Existing clusters are still supported but creation of new clusters is not supported for these types.)  C1 node types: cache.c1.xlarge      Memory optimized with data tiering:   Current generation:   R6gd node types (available only for Redis engine version 6.2 onward).  cache.r6gd.xlarge, cache.r6gd.2xlarge, cache.r6gd.4xlarge, cache.r6gd.8xlarge, cache.r6gd.12xlarge, cache.r6gd.16xlarge      Memory optimized:   Current generation:   R6g node types (available only for Redis engine version 5.0.6 onward and for Memcached engine version 1.5.16 onward).  cache.r6g.large, cache.r6g.xlarge, cache.r6g.2xlarge, cache.r6g.4xlarge, cache.r6g.8xlarge, cache.r6g.12xlarge, cache.r6g.16xlarge   For region availability, see Supported Node Types    R5 node types: cache.r5.large, cache.r5.xlarge, cache.r5.2xlarge, cache.r5.4xlarge, cache.r5.12xlarge, cache.r5.24xlarge   R4 node types: cache.r4.large, cache.r4.xlarge, cache.r4.2xlarge, cache.r4.4xlarge, cache.r4.8xlarge, cache.r4.16xlarge    Previous generation: (not recommended. Existing clusters are still supported but creation of new clusters is not supported for these types.)  M2 node types: cache.m2.xlarge, cache.m2.2xlarge, cache.m2.4xlarge   R3 node types: cache.r3.large, cache.r3.xlarge, cache.r3.2xlarge, cache.r3.4xlarge, cache.r3.8xlarge       Additional node type info    All current generation instance types are created in Amazon VPC by default.   Redis append-only files (AOF) are not supported for T1 or T2 instances.   Redis Multi-AZ with automatic failover is not supported on T1 instances.   Redis configuration variables appendonly and appendfsync are not supported on Redis version 2.8.22 and later.  
+     * The cache node type filter value. Use this parameter to show only the available offerings matching the specified cache node type. The following node types are supported by ElastiCache. Generally speaking, the current generation types provide more memory and computational power at lower cost when compared to their equivalent previous generation counterparts.   General purpose:   Current generation:   M6g node types (available only for Redis engine version 5.0.6 onward and for Memcached engine version 1.5.16 onward): cache.m6g.large, cache.m6g.xlarge, cache.m6g.2xlarge, cache.m6g.4xlarge, cache.m6g.8xlarge, cache.m6g.12xlarge, cache.m6g.16xlarge   For region availability, see Supported Node Types    M5 node types: cache.m5.large, cache.m5.xlarge, cache.m5.2xlarge, cache.m5.4xlarge, cache.m5.12xlarge, cache.m5.24xlarge   M4 node types: cache.m4.large, cache.m4.xlarge, cache.m4.2xlarge, cache.m4.4xlarge, cache.m4.10xlarge   T4g node types (available only for Redis engine version 5.0.6 onward and Memcached engine version 1.5.16 onward): cache.t4g.micro, cache.t4g.small, cache.t4g.medium   T3 node types: cache.t3.micro, cache.t3.small, cache.t3.medium   T2 node types: cache.t2.micro, cache.t2.small, cache.t2.medium    Previous generation: (not recommended. Existing clusters are still supported but creation of new clusters is not supported for these types.)  T1 node types: cache.t1.micro   M1 node types: cache.m1.small, cache.m1.medium, cache.m1.large, cache.m1.xlarge   M3 node types: cache.m3.medium, cache.m3.large, cache.m3.xlarge, cache.m3.2xlarge      Compute optimized:   Previous generation: (not recommended. Existing clusters are still supported but creation of new clusters is not supported for these types.)  C1 node types: cache.c1.xlarge      Memory optimized:   Current generation:   R6g node types (available only for Redis engine version 5.0.6 onward and for Memcached engine version 1.5.16 onward).  cache.r6g.large, cache.r6g.xlarge, cache.r6g.2xlarge, cache.r6g.4xlarge, cache.r6g.8xlarge, cache.r6g.12xlarge, cache.r6g.16xlarge   For region availability, see Supported Node Types    R5 node types: cache.r5.large, cache.r5.xlarge, cache.r5.2xlarge, cache.r5.4xlarge, cache.r5.12xlarge, cache.r5.24xlarge   R4 node types: cache.r4.large, cache.r4.xlarge, cache.r4.2xlarge, cache.r4.4xlarge, cache.r4.8xlarge, cache.r4.16xlarge    Previous generation: (not recommended. Existing clusters are still supported but creation of new clusters is not supported for these types.)  M2 node types: cache.m2.xlarge, cache.m2.2xlarge, cache.m2.4xlarge   R3 node types: cache.r3.large, cache.r3.xlarge, cache.r3.2xlarge, cache.r3.4xlarge, cache.r3.8xlarge       Additional node type info    All current generation instance types are created in Amazon VPC by default.   Redis append-only files (AOF) are not supported for T1 or T2 instances.   Redis Multi-AZ with automatic failover is not supported on T1 instances.   Redis configuration variables appendonly and appendfsync are not supported on Redis version 2.8.22 and later.  
      */
     CacheNodeType?: String;
     /**
@@ -2394,8 +2436,10 @@ declare namespace ElastiCache {
   export interface IncreaseReplicaCountResult {
     ReplicationGroup?: ReplicationGroup;
   }
+  export type InputAuthenticationType = "password"|"no-password-required"|"iam"|string;
   export type Integer = number;
   export type IntegerOptional = number;
+  export type IpDiscovery = "ipv4"|"ipv6"|string;
   export type KeyList = String[];
   export interface KinesisFirehoseDestinationDetails {
     /**
@@ -2553,6 +2597,10 @@ declare namespace ElastiCache {
      * Specifies the destination, format and type of the logs.
      */
     LogDeliveryConfigurations?: LogDeliveryConfigurationRequestList;
+    /**
+     * The network type you choose when modifying a cluster, either ipv4 | ipv6. IPv6 is supported for workloads using Redis engine version 6.2 onward or Memcached engine version 1.6.6 on all instances built on the Nitro system.
+     */
+    IpDiscovery?: IpDiscovery;
   }
   export interface ModifyCacheClusterResult {
     CacheCluster?: CacheCluster;
@@ -2718,6 +2766,10 @@ declare namespace ElastiCache {
      * Specifies the destination, format and type of the logs.
      */
     LogDeliveryConfigurations?: LogDeliveryConfigurationRequestList;
+    /**
+     * The network type you choose when modifying a cluster, either ipv4 | ipv6. IPv6 is supported for workloads using Redis engine version 6.2 onward or Memcached engine version 1.6.6 on all instances built on the Nitro system.
+     */
+    IpDiscovery?: IpDiscovery;
   }
   export interface ModifyReplicationGroupResult {
     ReplicationGroup?: ReplicationGroup;
@@ -2786,8 +2838,14 @@ declare namespace ElastiCache {
      * Indicates no password is required for the user.
      */
     NoPasswordRequired?: BooleanOptional;
+    /**
+     * Specifies how to authenticate the user.
+     */
+    AuthenticationMode?: AuthenticationMode;
   }
   export type MultiAZStatus = "enabled"|"disabled"|string;
+  export type NetworkType = "ipv4"|"ipv6"|"dual_stack"|string;
+  export type NetworkTypeList = NetworkType[];
   export interface NodeGroup {
     /**
      * The identifier for the node group (shard). A Redis (cluster mode disabled) replication group contains only 1 node group; therefore, the node group ID is 0001. A Redis (cluster mode enabled) replication group contains 1 to 90 node groups numbered 0001 to 0090. Optionally, the user can provide the id for a node group. 
@@ -3280,9 +3338,17 @@ declare namespace ElastiCache {
      */
     DataTiering?: DataTieringStatus;
     /**
-     *  If you are running Redis engine version 6.0 or later, set this parameter to yes if you want to opt-in to the next auto minor version upgrade campaign. This parameter is disabled for previous versions.  
+     *  If you are running Redis engine version 6.0 or later, set this parameter to yes if you want to opt-in to the next auto minor version upgrade campaign. This parameter is disabled for previous versions. 
      */
     AutoMinorVersionUpgrade?: Boolean;
+    /**
+     * Must be either ipv4 | ipv6 | dual_stack. IPv6 is supported for workloads using Redis engine version 6.2 onward or Memcached engine version 1.6.6 on all instances built on the Nitro system.
+     */
+    NetworkType?: NetworkType;
+    /**
+     * The network type you choose when modifying a cluster, either ipv4 | ipv6. IPv6 is supported for workloads using Redis engine version 6.2 onward or Memcached engine version 1.6.6 on all instances built on the Nitro system.
+     */
+    IpDiscovery?: IpDiscovery;
   }
   export type ReplicationGroupIdList = String[];
   export type ReplicationGroupList = ReplicationGroup[];
@@ -3333,7 +3399,7 @@ declare namespace ElastiCache {
      */
     ReservedCacheNodesOfferingId?: String;
     /**
-     * The cache node type for the reserved cache nodes. The following node types are supported by ElastiCache. Generally speaking, the current generation types provide more memory and computational power at lower cost when compared to their equivalent previous generation counterparts.   General purpose:   Current generation:   M6g node types: (available only for Redis engine version 5.0.6 onward and for Memcached engine version 1.5.16 onward): cache.m6g.large, cache.m6g.xlarge, cache.m6g.2xlarge, cache.m6g.4xlarge, cache.m6g.8xlarge, cache.m6g.12xlarge, cache.m6g.16xlarge   For region availability, see Supported Node Types    M5 node types: cache.m5.large, cache.m5.xlarge, cache.m5.2xlarge, cache.m5.4xlarge, cache.m5.12xlarge, cache.m5.24xlarge   M4 node types: cache.m4.large, cache.m4.xlarge, cache.m4.2xlarge, cache.m4.4xlarge, cache.m4.10xlarge   T4g node types (available only for Redis engine version 5.0.6 onward and Memcached engine version 1.5.16 onward): cache.t4g.micro, cache.t4g.small, cache.t4g.medium   T3 node types: cache.t3.micro, cache.t3.small, cache.t3.medium   T2 node types: cache.t2.micro, cache.t2.small, cache.t2.medium    Previous generation: (not recommended. Existing clusters are still supported but creation of new clusters is not supported for these types.)  T1 node types: cache.t1.micro   M1 node types: cache.m1.small, cache.m1.medium, cache.m1.large, cache.m1.xlarge   M3 node types: cache.m3.medium, cache.m3.large, cache.m3.xlarge, cache.m3.2xlarge      Compute optimized:   Previous generation: (not recommended. Existing clusters are still supported but creation of new clusters is not supported for these types.)  C1 node types: cache.c1.xlarge      Memory optimized with data tiering:   Current generation:   R6gd node types (available only for Redis engine version 6.2 onward).  cache.r6gd.xlarge, cache.r6gd.2xlarge, cache.r6gd.4xlarge, cache.r6gd.8xlarge, cache.r6gd.12xlarge, cache.r6gd.16xlarge      Memory optimized:   Current generation:   R6g node types (available only for Redis engine version 5.0.6 onward and for Memcached engine version 1.5.16 onward).  cache.r6g.large, cache.r6g.xlarge, cache.r6g.2xlarge, cache.r6g.4xlarge, cache.r6g.8xlarge, cache.r6g.12xlarge, cache.r6g.16xlarge   For region availability, see Supported Node Types    R5 node types: cache.r5.large, cache.r5.xlarge, cache.r5.2xlarge, cache.r5.4xlarge, cache.r5.12xlarge, cache.r5.24xlarge   R4 node types: cache.r4.large, cache.r4.xlarge, cache.r4.2xlarge, cache.r4.4xlarge, cache.r4.8xlarge, cache.r4.16xlarge    Previous generation: (not recommended. Existing clusters are still supported but creation of new clusters is not supported for these types.)  M2 node types: cache.m2.xlarge, cache.m2.2xlarge, cache.m2.4xlarge   R3 node types: cache.r3.large, cache.r3.xlarge, cache.r3.2xlarge, cache.r3.4xlarge, cache.r3.8xlarge       Additional node type info    All current generation instance types are created in Amazon VPC by default.   Redis append-only files (AOF) are not supported for T1 or T2 instances.   Redis Multi-AZ with automatic failover is not supported on T1 instances.   Redis configuration variables appendonly and appendfsync are not supported on Redis version 2.8.22 and later.  
+     * The cache node type for the reserved cache nodes. The following node types are supported by ElastiCache. Generally speaking, the current generation types provide more memory and computational power at lower cost when compared to their equivalent previous generation counterparts.   General purpose:   Current generation:   M6g node types (available only for Redis engine version 5.0.6 onward and for Memcached engine version 1.5.16 onward): cache.m6g.large, cache.m6g.xlarge, cache.m6g.2xlarge, cache.m6g.4xlarge, cache.m6g.8xlarge, cache.m6g.12xlarge, cache.m6g.16xlarge   For region availability, see Supported Node Types    M5 node types: cache.m5.large, cache.m5.xlarge, cache.m5.2xlarge, cache.m5.4xlarge, cache.m5.12xlarge, cache.m5.24xlarge   M4 node types: cache.m4.large, cache.m4.xlarge, cache.m4.2xlarge, cache.m4.4xlarge, cache.m4.10xlarge   T4g node types (available only for Redis engine version 5.0.6 onward and Memcached engine version 1.5.16 onward): cache.t4g.micro, cache.t4g.small, cache.t4g.medium   T3 node types: cache.t3.micro, cache.t3.small, cache.t3.medium   T2 node types: cache.t2.micro, cache.t2.small, cache.t2.medium    Previous generation: (not recommended. Existing clusters are still supported but creation of new clusters is not supported for these types.)  T1 node types: cache.t1.micro   M1 node types: cache.m1.small, cache.m1.medium, cache.m1.large, cache.m1.xlarge   M3 node types: cache.m3.medium, cache.m3.large, cache.m3.xlarge, cache.m3.2xlarge      Compute optimized:   Previous generation: (not recommended. Existing clusters are still supported but creation of new clusters is not supported for these types.)  C1 node types: cache.c1.xlarge      Memory optimized:   Current generation:   R6g node types (available only for Redis engine version 5.0.6 onward and for Memcached engine version 1.5.16 onward).  cache.r6g.large, cache.r6g.xlarge, cache.r6g.2xlarge, cache.r6g.4xlarge, cache.r6g.8xlarge, cache.r6g.12xlarge, cache.r6g.16xlarge   For region availability, see Supported Node Types    R5 node types: cache.r5.large, cache.r5.xlarge, cache.r5.2xlarge, cache.r5.4xlarge, cache.r5.12xlarge, cache.r5.24xlarge   R4 node types: cache.r4.large, cache.r4.xlarge, cache.r4.2xlarge, cache.r4.4xlarge, cache.r4.8xlarge, cache.r4.16xlarge    Previous generation: (not recommended. Existing clusters are still supported but creation of new clusters is not supported for these types.)  M2 node types: cache.m2.xlarge, cache.m2.2xlarge, cache.m2.4xlarge   R3 node types: cache.r3.large, cache.r3.xlarge, cache.r3.2xlarge, cache.r3.4xlarge, cache.r3.8xlarge       Additional node type info    All current generation instance types are created in Amazon VPC by default.   Redis append-only files (AOF) are not supported for T1 or T2 instances.   Redis Multi-AZ with automatic failover is not supported on T1 instances.   Redis configuration variables appendonly and appendfsync are not supported on Redis version 2.8.22 and later.  
      */
     CacheNodeType?: String;
     /**
@@ -3394,7 +3460,7 @@ declare namespace ElastiCache {
      */
     ReservedCacheNodesOfferingId?: String;
     /**
-     * The cache node type for the reserved cache node. The following node types are supported by ElastiCache. Generally speaking, the current generation types provide more memory and computational power at lower cost when compared to their equivalent previous generation counterparts.   General purpose:   Current generation:   M6g node types: (available only for Redis engine version 5.0.6 onward and for Memcached engine version 1.5.16 onward): cache.m6g.large, cache.m6g.xlarge, cache.m6g.2xlarge, cache.m6g.4xlarge, cache.m6g.8xlarge, cache.m6g.12xlarge, cache.m6g.16xlarge   For region availability, see Supported Node Types    M5 node types: cache.m5.large, cache.m5.xlarge, cache.m5.2xlarge, cache.m5.4xlarge, cache.m5.12xlarge, cache.m5.24xlarge   M4 node types: cache.m4.large, cache.m4.xlarge, cache.m4.2xlarge, cache.m4.4xlarge, cache.m4.10xlarge   T4g node types (available only for Redis engine version 5.0.6 onward and Memcached engine version 1.5.16 onward): cache.t4g.micro, cache.t4g.small, cache.t4g.medium   T3 node types: cache.t3.micro, cache.t3.small, cache.t3.medium   T2 node types: cache.t2.micro, cache.t2.small, cache.t2.medium    Previous generation: (not recommended. Existing clusters are still supported but creation of new clusters is not supported for these types.)  T1 node types: cache.t1.micro   M1 node types: cache.m1.small, cache.m1.medium, cache.m1.large, cache.m1.xlarge   M3 node types: cache.m3.medium, cache.m3.large, cache.m3.xlarge, cache.m3.2xlarge      Compute optimized:   Previous generation: (not recommended. Existing clusters are still supported but creation of new clusters is not supported for these types.)  C1 node types: cache.c1.xlarge      Memory optimized with data tiering:   Current generation:   R6gd node types (available only for Redis engine version 6.2 onward).  cache.r6gd.xlarge, cache.r6gd.2xlarge, cache.r6gd.4xlarge, cache.r6gd.8xlarge, cache.r6gd.12xlarge, cache.r6gd.16xlarge      Memory optimized:   Current generation:   R6g node types (available only for Redis engine version 5.0.6 onward and for Memcached engine version 1.5.16 onward).  cache.r6g.large, cache.r6g.xlarge, cache.r6g.2xlarge, cache.r6g.4xlarge, cache.r6g.8xlarge, cache.r6g.12xlarge, cache.r6g.16xlarge   For region availability, see Supported Node Types    R5 node types: cache.r5.large, cache.r5.xlarge, cache.r5.2xlarge, cache.r5.4xlarge, cache.r5.12xlarge, cache.r5.24xlarge   R4 node types: cache.r4.large, cache.r4.xlarge, cache.r4.2xlarge, cache.r4.4xlarge, cache.r4.8xlarge, cache.r4.16xlarge    Previous generation: (not recommended. Existing clusters are still supported but creation of new clusters is not supported for these types.)  M2 node types: cache.m2.xlarge, cache.m2.2xlarge, cache.m2.4xlarge   R3 node types: cache.r3.large, cache.r3.xlarge, cache.r3.2xlarge, cache.r3.4xlarge, cache.r3.8xlarge       Additional node type info    All current generation instance types are created in Amazon VPC by default.   Redis append-only files (AOF) are not supported for T1 or T2 instances.   Redis Multi-AZ with automatic failover is not supported on T1 instances.   Redis configuration variables appendonly and appendfsync are not supported on Redis version 2.8.22 and later.  
+     * The cache node type for the reserved cache node. The following node types are supported by ElastiCache. Generally speaking, the current generation types provide more memory and computational power at lower cost when compared to their equivalent previous generation counterparts.   General purpose:   Current generation:   M6g node types (available only for Redis engine version 5.0.6 onward and for Memcached engine version 1.5.16 onward): cache.m6g.large, cache.m6g.xlarge, cache.m6g.2xlarge, cache.m6g.4xlarge, cache.m6g.8xlarge, cache.m6g.12xlarge, cache.m6g.16xlarge   For region availability, see Supported Node Types    M5 node types: cache.m5.large, cache.m5.xlarge, cache.m5.2xlarge, cache.m5.4xlarge, cache.m5.12xlarge, cache.m5.24xlarge   M4 node types: cache.m4.large, cache.m4.xlarge, cache.m4.2xlarge, cache.m4.4xlarge, cache.m4.10xlarge   T4g node types (available only for Redis engine version 5.0.6 onward and Memcached engine version 1.5.16 onward): cache.t4g.micro, cache.t4g.small, cache.t4g.medium   T3 node types: cache.t3.micro, cache.t3.small, cache.t3.medium   T2 node types: cache.t2.micro, cache.t2.small, cache.t2.medium    Previous generation: (not recommended. Existing clusters are still supported but creation of new clusters is not supported for these types.)  T1 node types: cache.t1.micro   M1 node types: cache.m1.small, cache.m1.medium, cache.m1.large, cache.m1.xlarge   M3 node types: cache.m3.medium, cache.m3.large, cache.m3.xlarge, cache.m3.2xlarge      Compute optimized:   Previous generation: (not recommended. Existing clusters are still supported but creation of new clusters is not supported for these types.)  C1 node types: cache.c1.xlarge      Memory optimized:   Current generation:   R6g node types (available only for Redis engine version 5.0.6 onward and for Memcached engine version 1.5.16 onward).  cache.r6g.large, cache.r6g.xlarge, cache.r6g.2xlarge, cache.r6g.4xlarge, cache.r6g.8xlarge, cache.r6g.12xlarge, cache.r6g.16xlarge   For region availability, see Supported Node Types    R5 node types: cache.r5.large, cache.r5.xlarge, cache.r5.2xlarge, cache.r5.4xlarge, cache.r5.12xlarge, cache.r5.24xlarge   R4 node types: cache.r4.large, cache.r4.xlarge, cache.r4.2xlarge, cache.r4.4xlarge, cache.r4.8xlarge, cache.r4.16xlarge    Previous generation: (not recommended. Existing clusters are still supported but creation of new clusters is not supported for these types.)  M2 node types: cache.m2.xlarge, cache.m2.2xlarge, cache.m2.4xlarge   R3 node types: cache.r3.large, cache.r3.xlarge, cache.r3.2xlarge, cache.r3.4xlarge, cache.r3.8xlarge       Additional node type info    All current generation instance types are created in Amazon VPC by default.   Redis append-only files (AOF) are not supported for T1 or T2 instances.   Redis Multi-AZ with automatic failover is not supported on T1 instances.   Redis configuration variables appendonly and appendfsync are not supported on Redis version 2.8.22 and later.  
      */
     CacheNodeType?: String;
     /**
@@ -3591,7 +3657,7 @@ declare namespace ElastiCache {
      */
     SnapshotSource?: String;
     /**
-     * The name of the compute and memory capacity node type for the source cluster. The following node types are supported by ElastiCache. Generally speaking, the current generation types provide more memory and computational power at lower cost when compared to their equivalent previous generation counterparts.   General purpose:   Current generation:   M6g node types (available only for Redis engine version 5.0.6 onward and for Memcached engine version 1.5.16 onward).  cache.m6g.large, cache.m6g.xlarge, cache.m6g.2xlarge, cache.m6g.4xlarge, cache.m6g.8xlarge, cache.m6g.12xlarge, cache.m6g.16xlarge   For region availability, see Supported Node Types    M5 node types: cache.m5.large, cache.m5.xlarge, cache.m5.2xlarge, cache.m5.4xlarge, cache.m5.12xlarge, cache.m5.24xlarge   M4 node types: cache.m4.large, cache.m4.xlarge, cache.m4.2xlarge, cache.m4.4xlarge, cache.m4.10xlarge   T4g node types (available only for Redis engine version 5.0.6 onward and Memcached engine version 1.5.16 onward):  cache.t4g.micro, cache.t4g.small, cache.t4g.medium   T3 node types: cache.t3.micro, cache.t3.small, cache.t3.medium   T2 node types: cache.t2.micro, cache.t2.small, cache.t2.medium    Previous generation: (not recommended. Existing clusters are still supported but creation of new clusters is not supported for these types.)  T1 node types: cache.t1.micro   M1 node types: cache.m1.small, cache.m1.medium, cache.m1.large, cache.m1.xlarge   M3 node types: cache.m3.medium, cache.m3.large, cache.m3.xlarge, cache.m3.2xlarge      Compute optimized:   Previous generation: (not recommended. Existing clusters are still supported but creation of new clusters is not supported for these types.)  C1 node types: cache.c1.xlarge      Memory optimized with data tiering:   Current generation:   R6gd node types (available only for Redis engine version 6.2 onward).  cache.r6gd.xlarge, cache.r6gd.2xlarge, cache.r6gd.4xlarge, cache.r6gd.8xlarge, cache.r6gd.12xlarge, cache.r6gd.16xlarge      Memory optimized:   Current generation:   R6g node types (available only for Redis engine version 5.0.6 onward and for Memcached engine version 1.5.16 onward).  cache.r6g.large, cache.r6g.xlarge, cache.r6g.2xlarge, cache.r6g.4xlarge, cache.r6g.8xlarge, cache.r6g.12xlarge, cache.r6g.16xlarge   For region availability, see Supported Node Types    For region availability, see Supported Node Types    R5 node types: cache.r5.large, cache.r5.xlarge, cache.r5.2xlarge, cache.r5.4xlarge, cache.r5.12xlarge, cache.r5.24xlarge   R4 node types: cache.r4.large, cache.r4.xlarge, cache.r4.2xlarge, cache.r4.4xlarge, cache.r4.8xlarge, cache.r4.16xlarge    Previous generation: (not recommended. Existing clusters are still supported but creation of new clusters is not supported for these types.)  M2 node types: cache.m2.xlarge, cache.m2.2xlarge, cache.m2.4xlarge   R3 node types: cache.r3.large, cache.r3.xlarge, cache.r3.2xlarge, cache.r3.4xlarge, cache.r3.8xlarge       Additional node type info    All current generation instance types are created in Amazon VPC by default.   Redis append-only files (AOF) are not supported for T1 or T2 instances.   Redis Multi-AZ with automatic failover is not supported on T1 instances.   Redis configuration variables appendonly and appendfsync are not supported on Redis version 2.8.22 and later.  
+     * The name of the compute and memory capacity node type for the source cluster. The following node types are supported by ElastiCache. Generally speaking, the current generation types provide more memory and computational power at lower cost when compared to their equivalent previous generation counterparts.   General purpose:   Current generation:   M6g node types (available only for Redis engine version 5.0.6 onward and for Memcached engine version 1.5.16 onward): cache.m6g.large, cache.m6g.xlarge, cache.m6g.2xlarge, cache.m6g.4xlarge, cache.m6g.8xlarge, cache.m6g.12xlarge, cache.m6g.16xlarge   For region availability, see Supported Node Types    M5 node types: cache.m5.large, cache.m5.xlarge, cache.m5.2xlarge, cache.m5.4xlarge, cache.m5.12xlarge, cache.m5.24xlarge   M4 node types: cache.m4.large, cache.m4.xlarge, cache.m4.2xlarge, cache.m4.4xlarge, cache.m4.10xlarge   T4g node types (available only for Redis engine version 5.0.6 onward and Memcached engine version 1.5.16 onward): cache.t4g.micro, cache.t4g.small, cache.t4g.medium   T3 node types: cache.t3.micro, cache.t3.small, cache.t3.medium   T2 node types: cache.t2.micro, cache.t2.small, cache.t2.medium    Previous generation: (not recommended. Existing clusters are still supported but creation of new clusters is not supported for these types.)  T1 node types: cache.t1.micro   M1 node types: cache.m1.small, cache.m1.medium, cache.m1.large, cache.m1.xlarge   M3 node types: cache.m3.medium, cache.m3.large, cache.m3.xlarge, cache.m3.2xlarge      Compute optimized:   Previous generation: (not recommended. Existing clusters are still supported but creation of new clusters is not supported for these types.)  C1 node types: cache.c1.xlarge      Memory optimized:   Current generation:   R6g node types (available only for Redis engine version 5.0.6 onward and for Memcached engine version 1.5.16 onward).  cache.r6g.large, cache.r6g.xlarge, cache.r6g.2xlarge, cache.r6g.4xlarge, cache.r6g.8xlarge, cache.r6g.12xlarge, cache.r6g.16xlarge   For region availability, see Supported Node Types    R5 node types: cache.r5.large, cache.r5.xlarge, cache.r5.2xlarge, cache.r5.4xlarge, cache.r5.12xlarge, cache.r5.24xlarge   R4 node types: cache.r4.large, cache.r4.xlarge, cache.r4.2xlarge, cache.r4.4xlarge, cache.r4.8xlarge, cache.r4.16xlarge    Previous generation: (not recommended. Existing clusters are still supported but creation of new clusters is not supported for these types.)  M2 node types: cache.m2.xlarge, cache.m2.2xlarge, cache.m2.4xlarge   R3 node types: cache.r3.large, cache.r3.xlarge, cache.r3.2xlarge, cache.r3.4xlarge, cache.r3.8xlarge       Additional node type info    All current generation instance types are created in Amazon VPC by default.   Redis append-only files (AOF) are not supported for T1 or T2 instances.   Redis Multi-AZ with automatic failover is not supported on T1 instances.   Redis configuration variables appendonly and appendfsync are not supported on Redis version 2.8.22 and later.  
      */
     CacheNodeType?: String;
     /**
@@ -3709,6 +3775,10 @@ declare namespace ElastiCache {
      * The outpost ARN of the subnet.
      */
     SubnetOutpost?: SubnetOutpost;
+    /**
+     * Either ipv4 | ipv6 | dual_stack. IPv6 is supported for workloads using Redis engine version 6.2 onward or Memcached engine version 1.6.6 on all instances built on the Nitro system.
+     */
+    SupportedNetworkTypes?: NetworkTypeList;
   }
   export type SubnetIdentifierList = String[];
   export type SubnetList = Subnet[];