cdk-rds-sql 1.3.1 → 2.0.0

package/node_modules/aws-sdk/clients/elbv2.d.ts

@@ -213,11 +213,11 @@ declare class ELBv2 extends Service {
    */
   modifyRule(callback?: (err: AWSError, data: ELBv2.Types.ModifyRuleOutput) => void): Request<ELBv2.Types.ModifyRuleOutput, AWSError>;
   /**
-   * Modifies the health checks used when evaluating the health state of the targets in the specified target group. If the protocol of the target group is TCP, TLS, UDP, or TCP_UDP, you can't modify the health check protocol, interval, timeout, or success codes.
+   * Modifies the health checks used when evaluating the health state of the targets in the specified target group.
    */
   modifyTargetGroup(params: ELBv2.Types.ModifyTargetGroupInput, callback?: (err: AWSError, data: ELBv2.Types.ModifyTargetGroupOutput) => void): Request<ELBv2.Types.ModifyTargetGroupOutput, AWSError>;
   /**
-   * Modifies the health checks used when evaluating the health state of the targets in the specified target group. If the protocol of the target group is TCP, TLS, UDP, or TCP_UDP, you can't modify the health check protocol, interval, timeout, or success codes.
+   * Modifies the health checks used when evaluating the health state of the targets in the specified target group.
    */
   modifyTargetGroup(callback?: (err: AWSError, data: ELBv2.Types.ModifyTargetGroupOutput) => void): Request<ELBv2.Types.ModifyTargetGroupOutput, AWSError>;
   /**
@@ -253,11 +253,11 @@ declare class ELBv2 extends Service {
    */
   removeTags(callback?: (err: AWSError, data: ELBv2.Types.RemoveTagsOutput) => void): Request<ELBv2.Types.RemoveTagsOutput, AWSError>;
   /**
-   * Sets the type of IP addresses used by the subnets of the specified Application Load Balancer or Network Load Balancer.
+   * Sets the type of IP addresses used by the subnets of the specified load balancer.
    */
   setIpAddressType(params: ELBv2.Types.SetIpAddressTypeInput, callback?: (err: AWSError, data: ELBv2.Types.SetIpAddressTypeOutput) => void): Request<ELBv2.Types.SetIpAddressTypeOutput, AWSError>;
   /**
-   * Sets the type of IP addresses used by the subnets of the specified Application Load Balancer or Network Load Balancer.
+   * Sets the type of IP addresses used by the subnets of the specified load balancer.
    */
   setIpAddressType(callback?: (err: AWSError, data: ELBv2.Types.SetIpAddressTypeOutput) => void): Request<ELBv2.Types.SetIpAddressTypeOutput, AWSError>;
   /**
@@ -698,23 +698,23 @@ declare namespace ELBv2 {
      */
     HealthCheckPath?: Path;
     /**
-     * The approximate amount of time, in seconds, between health checks of an individual target. If the target group protocol is HTTP or HTTPS, the default is 30 seconds. If the target group protocol is TCP, TLS, UDP, or TCP_UDP, the supported values are 10 and 30 seconds and the default is 30 seconds. If the target group protocol is GENEVE, the default is 10 seconds. If the target type is lambda, the default is 35 seconds.
+     * The approximate amount of time, in seconds, between health checks of an individual target. The range is 5-300. If the target group protocol is TCP, TLS, UDP, TCP_UDP, HTTP or HTTPS, the default is 30 seconds. If the target group protocol is GENEVE, the default is 10 seconds. If the target type is lambda, the default is 35 seconds.
      */
     HealthCheckIntervalSeconds?: HealthCheckIntervalSeconds;
     /**
-     * The amount of time, in seconds, during which no response from a target means a failed health check. For target groups with a protocol of HTTP, HTTPS, or GENEVE, the default is 5 seconds. For target groups with a protocol of TCP or TLS, this value must be 6 seconds for HTTP health checks and 10 seconds for TCP and HTTPS health checks. If the target type is lambda, the default is 30 seconds.
+     * The amount of time, in seconds, during which no response from a target means a failed health check. The range is 2–120 seconds. For target groups with a protocol of HTTP, the default is 6 seconds. For target groups with a protocol of TCP, TLS or HTTPS, the default is 10 seconds. For target groups with a protocol of GENEVE, the default is 5 seconds. If the target type is lambda, the default is 30 seconds.
      */
     HealthCheckTimeoutSeconds?: HealthCheckTimeoutSeconds;
     /**
-     * The number of consecutive health checks successes required before considering an unhealthy target healthy. For target groups with a protocol of HTTP or HTTPS, the default is 5. For target groups with a protocol of TCP, TLS, or GENEVE, the default is 3. If the target type is lambda, the default is 5.
+     * The number of consecutive health check successes required before considering a target healthy. The range is 2-10. If the target group protocol is TCP, TCP_UDP, UDP, TLS, HTTP or HTTPS, the default is 5. For target groups with a protocol of GENEVE, the default is 3. If the target type is lambda, the default is 5.
      */
     HealthyThresholdCount?: HealthCheckThresholdCount;
     /**
-     * The number of consecutive health check failures required before considering a target unhealthy. If the target group protocol is HTTP or HTTPS, the default is 2. If the target group protocol is TCP or TLS, this value must be the same as the healthy threshold count. If the target group protocol is GENEVE, the default is 3. If the target type is lambda, the default is 2.
+     * The number of consecutive health check failures required before considering a target unhealthy. The range is 2-10. If the target group protocol is TCP, TCP_UDP, UDP, TLS, HTTP or HTTPS, the default is 2. For target groups with a protocol of GENEVE, the default is 3. If the target type is lambda, the default is 5.
      */
     UnhealthyThresholdCount?: HealthCheckThresholdCount;
     /**
-     * [HTTP/HTTPS health checks] The HTTP or gRPC codes to use when checking for a successful response from a target.
+     * [HTTP/HTTPS health checks] The HTTP or gRPC codes to use when checking for a successful response from a target. For target groups with a protocol of TCP, TCP_UDP, UDP or TLS the range is 200-599. For target groups with a protocol of HTTP or HTTPS, the range is 200-499. For target groups with a protocol of GENEVE, the range is 200-399.
      */
     Matcher?: Matcher;
     /**
@@ -1044,7 +1044,7 @@ declare namespace ELBv2 {
   export type FixedResponseActionStatusCode = string;
   export interface ForwardActionConfig {
     /**
-     * One or more target groups. For Network Load Balancers, you can specify a single target group.
+     * The target groups. For Network Load Balancers, you can specify a single target group.
      */
     TargetGroups?: TargetGroupList;
     /**
@@ -1060,7 +1060,7 @@ declare namespace ELBv2 {
   export type HealthCheckTimeoutSeconds = number;
   export interface HostHeaderConditionConfig {
     /**
-     * One or more host names. The maximum size of each name is 128 characters. The comparison is case insensitive. The following wildcard characters are supported: * (matches 0 or more characters) and ? (matches exactly 1 character). If you specify multiple strings, the condition is satisfied if one of the strings matches the host name.
+     * The host names. The maximum size of each name is 128 characters. The comparison is case insensitive. The following wildcard characters are supported: * (matches 0 or more characters) and ? (matches exactly 1 character). If you specify multiple strings, the condition is satisfied if one of the strings matches the host name.
      */
     Values?: ListOfString;
   }
@@ -1071,7 +1071,7 @@ declare namespace ELBv2 {
      */
     HttpHeaderName?: HttpHeaderConditionName;
     /**
-     * One or more strings to compare against the value of the HTTP header. The maximum size of each string is 128 characters. The comparison strings are case insensitive. The following wildcard characters are supported: * (matches 0 or more characters) and ? (matches exactly 1 character). If the same header appears multiple times in the request, we search them in order until a match is found. If you specify multiple strings, the condition is satisfied if one of the strings matches the value of the HTTP header. To require that all of the strings are a match, create one condition per string.
+     * The strings to compare against the value of the HTTP header. The maximum size of each string is 128 characters. The comparison strings are case insensitive. The following wildcard characters are supported: * (matches 0 or more characters) and ? (matches exactly 1 character). If the same header appears multiple times in the request, we search them in order until a match is found. If you specify multiple strings, the condition is satisfied if one of the strings matches the value of the HTTP header. To require that all of the strings are a match, create one condition per string.
      */
     Values?: ListOfString;
   }
@@ -1212,7 +1212,7 @@ declare namespace ELBv2 {
   export type LoadBalancerArns = LoadBalancerArn[];
   export interface LoadBalancerAttribute {
     /**
-     * The name of the attribute. The following attribute is supported by all load balancers:    deletion_protection.enabled - Indicates whether deletion protection is enabled. The value is true or false. The default is false.   The following attributes are supported by both Application Load Balancers and Network Load Balancers:    access_logs.s3.enabled - Indicates whether access logs are enabled. The value is true or false. The default is false.    access_logs.s3.bucket - The name of the S3 bucket for the access logs. This attribute is required if access logs are enabled. The bucket must exist in the same region as the load balancer and have a bucket policy that grants Elastic Load Balancing permissions to write to the bucket.    access_logs.s3.prefix - The prefix for the location in the S3 bucket for the access logs.    ipv6.deny_all_igw_traffic - Blocks internet gateway (IGW) access to the load balancer. It is set to false for internet-facing load balancers and true for internal load balancers, preventing unintended access to your internal load balancer through an internet gateway.   The following attributes are supported by only Application Load Balancers:    idle_timeout.timeout_seconds - The idle timeout value, in seconds. The valid range is 1-4000 seconds. The default is 60 seconds.    routing.http.desync_mitigation_mode - Determines how the load balancer handles requests that might pose a security risk to your application. The possible values are monitor, defensive, and strictest. The default is defensive.    routing.http.drop_invalid_header_fields.enabled - Indicates whether HTTP headers with invalid header fields are removed by the load balancer (true) or routed to targets (false). The default is false.    routing.http.preserve_host_header.enabled - Indicates whether the Application Load Balancer should preserve the Host header in the HTTP request and send it to the target without any change. The possible values are true and false. The default is false.    routing.http.x_amzn_tls_version_and_cipher_suite.enabled - Indicates whether the two headers (x-amzn-tls-version and x-amzn-tls-cipher-suite), which contain information about the negotiated TLS version and cipher suite, are added to the client request before sending it to the target. The x-amzn-tls-version header has information about the TLS protocol version negotiated with the client, and the x-amzn-tls-cipher-suite header has information about the cipher suite negotiated with the client. Both headers are in OpenSSL format. The possible values for the attribute are true and false. The default is false.    routing.http.xff_client_port.enabled - Indicates whether the X-Forwarded-For header should preserve the source port that the client used to connect to the load balancer. The possible values are true and false. The default is false.    routing.http.xff_header_processing.mode - Enables you to modify, preserve, or remove the X-Forwarded-For header in the HTTP request before the Application Load Balancer sends the request to the target. The possible values are append, preserve, and remove. The default is append.   If the value is append, the Application Load Balancer adds the client IP address (of the last hop) to the X-Forwarded-For header in the HTTP request before it sends it to targets.   If the value is preserve the Application Load Balancer preserves the X-Forwarded-For header in the HTTP request, and sends it to targets without any change.   If the value is remove, the Application Load Balancer removes the X-Forwarded-For header in the HTTP request before it sends it to targets.      routing.http2.enabled - Indicates whether HTTP/2 is enabled. The possible values are true and false. The default is true. Elastic Load Balancing requires that message header names contain only alphanumeric characters and hyphens.    waf.fail_open.enabled - Indicates whether to allow a WAF-enabled load balancer to route requests to targets if it is unable to forward the request to Amazon Web Services WAF. The possible values are true and false. The default is false.   The following attribute is supported by Network Load Balancers and Gateway Load Balancers:    load_balancing.cross_zone.enabled - Indicates whether cross-zone load balancing is enabled. The possible values are true and false. The default is false.  
+     * The name of the attribute. The following attributes are supported by all load balancers:    deletion_protection.enabled - Indicates whether deletion protection is enabled. The value is true or false. The default is false.    load_balancing.cross_zone.enabled - Indicates whether cross-zone load balancing is enabled. The possible values are true and false. The default for Network Load Balancers and Gateway Load Balancers is false. The default for Application Load Balancers is true, and cannot be changed.   The following attributes are supported by both Application Load Balancers and Network Load Balancers:    access_logs.s3.enabled - Indicates whether access logs are enabled. The value is true or false. The default is false.    access_logs.s3.bucket - The name of the S3 bucket for the access logs. This attribute is required if access logs are enabled. The bucket must exist in the same region as the load balancer and have a bucket policy that grants Elastic Load Balancing permissions to write to the bucket.    access_logs.s3.prefix - The prefix for the location in the S3 bucket for the access logs.    ipv6.deny_all_igw_traffic - Blocks internet gateway (IGW) access to the load balancer. It is set to false for internet-facing load balancers and true for internal load balancers, preventing unintended access to your internal load balancer through an internet gateway.   The following attributes are supported by only Application Load Balancers:    idle_timeout.timeout_seconds - The idle timeout value, in seconds. The valid range is 1-4000 seconds. The default is 60 seconds.    routing.http.desync_mitigation_mode - Determines how the load balancer handles requests that might pose a security risk to your application. The possible values are monitor, defensive, and strictest. The default is defensive.    routing.http.drop_invalid_header_fields.enabled - Indicates whether HTTP headers with invalid header fields are removed by the load balancer (true) or routed to targets (false). The default is false.    routing.http.preserve_host_header.enabled - Indicates whether the Application Load Balancer should preserve the Host header in the HTTP request and send it to the target without any change. The possible values are true and false. The default is false.    routing.http.x_amzn_tls_version_and_cipher_suite.enabled - Indicates whether the two headers (x-amzn-tls-version and x-amzn-tls-cipher-suite), which contain information about the negotiated TLS version and cipher suite, are added to the client request before sending it to the target. The x-amzn-tls-version header has information about the TLS protocol version negotiated with the client, and the x-amzn-tls-cipher-suite header has information about the cipher suite negotiated with the client. Both headers are in OpenSSL format. The possible values for the attribute are true and false. The default is false.    routing.http.xff_client_port.enabled - Indicates whether the X-Forwarded-For header should preserve the source port that the client used to connect to the load balancer. The possible values are true and false. The default is false.    routing.http.xff_header_processing.mode - Enables you to modify, preserve, or remove the X-Forwarded-For header in the HTTP request before the Application Load Balancer sends the request to the target. The possible values are append, preserve, and remove. The default is append.   If the value is append, the Application Load Balancer adds the client IP address (of the last hop) to the X-Forwarded-For header in the HTTP request before it sends it to targets.   If the value is preserve the Application Load Balancer preserves the X-Forwarded-For header in the HTTP request, and sends it to targets without any change.   If the value is remove, the Application Load Balancer removes the X-Forwarded-For header in the HTTP request before it sends it to targets.      routing.http2.enabled - Indicates whether HTTP/2 is enabled. The possible values are true and false. The default is true. Elastic Load Balancing requires that message header names contain only alphanumeric characters and hyphens.    waf.fail_open.enabled - Indicates whether to allow a WAF-enabled load balancer to route requests to targets if it is unable to forward the request to Amazon Web Services WAF. The possible values are true and false. The default is false.  
      */
     Key?: LoadBalancerAttributeKey;
     /**
@@ -1242,7 +1242,7 @@ declare namespace ELBv2 {
   export type Marker = string;
   export interface Matcher {
     /**
-     * For Application Load Balancers, you can specify values between 200 and 499, and the default value is 200. You can specify multiple values (for example, "200,202") or a range of values (for example, "200-299"). For Network Load Balancers and Gateway Load Balancers, this must be "200–399". Note that when using shorthand syntax, some values such as commas need to be escaped.
+     * For Application Load Balancers, you can specify values between 200 and 499, with the default value being 200. You can specify multiple values (for example, "200,202") or a range of values (for example, "200-299"). For Network Load Balancers, you can specify values between 200 and 599, with the default value being 200-399. You can specify multiple values (for example, "200,202") or a range of values (for example, "200-299"). For Gateway Load Balancers, this must be "200–399". Note that when using shorthand syntax, some values such as commas need to be escaped.
      */
     HttpCode?: HttpCode;
     /**
@@ -1361,7 +1361,7 @@ declare namespace ELBv2 {
      */
     HealthCheckEnabled?: HealthCheckEnabled;
     /**
-     * The approximate amount of time, in seconds, between health checks of an individual target. For TCP health checks, the supported values are 10 or 30 seconds.
+     * The approximate amount of time, in seconds, between health checks of an individual target.
      */
     HealthCheckIntervalSeconds?: HealthCheckIntervalSeconds;
     /**
@@ -1373,11 +1373,11 @@ declare namespace ELBv2 {
      */
     HealthyThresholdCount?: HealthCheckThresholdCount;
     /**
-     * The number of consecutive health check failures required before considering the target unhealthy. For target groups with a protocol of TCP or TLS, this value must be the same as the healthy threshold count.
+     * The number of consecutive health check failures required before considering the target unhealthy.
      */
     UnhealthyThresholdCount?: HealthCheckThresholdCount;
     /**
-     * [HTTP/HTTPS health checks] The HTTP or gRPC codes to use when checking for a successful response from a target.
+     * [HTTP/HTTPS health checks] The HTTP or gRPC codes to use when checking for a successful response from a target. For target groups with a protocol of TCP, TCP_UDP, UDP or TLS the range is 200-599. For target groups with a protocol of HTTP or HTTPS, the range is 200-499. For target groups with a protocol of GENEVE, the range is 200-399.
      */
     Matcher?: Matcher;
   }
@@ -1393,7 +1393,7 @@ declare namespace ELBv2 {
   export type Path = string;
   export interface PathPatternConditionConfig {
     /**
-     * One or more path patterns to compare against the request URL. The maximum size of each string is 128 characters. The comparison is case sensitive. The following wildcard characters are supported: * (matches 0 or more characters) and ? (matches exactly 1 character). If you specify multiple strings, the condition is satisfied if one of them matches the request URL. The path pattern is compared only to the path of the URL, not to its query string. To compare against the query string, use QueryStringConditionConfig.
+     * The path patterns to compare against the request URL. The maximum size of each string is 128 characters. The comparison is case sensitive. The following wildcard characters are supported: * (matches 0 or more characters) and ? (matches exactly 1 character). If you specify multiple strings, the condition is satisfied if one of them matches the request URL. The path pattern is compared only to the path of the URL, not to its query string. To compare against the query string, use QueryStringConditionConfig.
      */
     Values?: ListOfString;
   }
@@ -1403,7 +1403,7 @@ declare namespace ELBv2 {
   export type ProtocolVersion = string;
   export interface QueryStringConditionConfig {
     /**
-     * One or more key/value pairs or values to find in the query string. The maximum size of each string is 128 characters. The comparison is case insensitive. The following wildcard characters are supported: * (matches 0 or more characters) and ? (matches exactly 1 character). To search for a literal '*' or '?' character in a query string, you must escape these characters in Values using a '\' character. If you specify multiple key/value pairs or values, the condition is satisfied if one of them is found in the query string.
+     * The key/value pairs or values to find in the query string. The maximum size of each string is 128 characters. The comparison is case insensitive. The following wildcard characters are supported: * (matches 0 or more characters) and ? (matches exactly 1 character). To search for a literal '*' or '?' character in a query string, you must escape these characters in Values using a '\' character. If you specify multiple key/value pairs or values, the condition is satisfied if one of them is found in the query string.
      */
     Values?: QueryStringKeyValuePairList;
   }
@@ -1636,7 +1636,7 @@ declare namespace ELBv2 {
   }
   export interface SourceIpConditionConfig {
     /**
-     * One or more source IP addresses, in CIDR format. You can use both IPv4 and IPv6 addresses. Wildcards are not supported. If you specify multiple addresses, the condition is satisfied if the source IP address of the request matches one of the CIDR blocks. This condition is not satisfied by the addresses in the X-Forwarded-For header. To search for addresses in the X-Forwarded-For header, use HttpHeaderConditionConfig.
+     * The source IP addresses, in CIDR format. You can use both IPv4 and IPv6 addresses. Wildcards are not supported. If you specify multiple addresses, the condition is satisfied if the source IP address of the request matches one of the CIDR blocks. This condition is not satisfied by the addresses in the X-Forwarded-For header. To search for addresses in the X-Forwarded-For header, use HttpHeaderConditionConfig.
      */
     Values?: ListOfString;
   }
@@ -1722,7 +1722,7 @@ declare namespace ELBv2 {
      */
     Port?: Port;
     /**
-     * An Availability Zone or all. This determines whether the target receives traffic from the load balancer nodes in the specified Availability Zone or from all enabled Availability Zones for the load balancer. This parameter is not supported if the target type of the target group is instance or alb. If the target type is ip and the IP address is in a subnet of the VPC for the target group, the Availability Zone is automatically detected and this parameter is optional. If the IP address is outside the VPC, this parameter is required. With an Application Load Balancer, if the target type is ip and the IP address is outside the VPC for the target group, the only supported value is all. If the target type is lambda, this parameter is optional and the only supported value is all.
+     * An Availability Zone or all. This determines whether the target receives traffic from the load balancer nodes in the specified Availability Zone or from all enabled Availability Zones for the load balancer. For Application Load Balancer target groups, the specified Availability Zone value is only applicable when cross-zone load balancing is off. Otherwise the parameter is ignored and treated as all. This parameter is not supported if the target type of the target group is instance or alb. If the target type is ip and the IP address is in a subnet of the VPC for the target group, the Availability Zone is automatically detected and this parameter is optional. If the IP address is outside the VPC, this parameter is required. For Application Load Balancer target groups with cross-zone load balancing off, if the target type is ip and the IP address is outside of the VPC for the target group, this should be an Availability Zone inside the VPC for the target group. If the target type is lambda, this parameter is optional and the only supported value is all.
      */
     AvailabilityZone?: ZoneName;
   }
@@ -1805,7 +1805,7 @@ declare namespace ELBv2 {
   export type TargetGroupArns = TargetGroupArn[];
   export interface TargetGroupAttribute {
     /**
-     * The name of the attribute. The following attribute is supported by all load balancers:    deregistration_delay.timeout_seconds - The amount of time, in seconds, for Elastic Load Balancing to wait before changing the state of a deregistering target from draining to unused. The range is 0-3600 seconds. The default value is 300 seconds. If the target is a Lambda function, this attribute is not supported.   The following attributes are supported by Application Load Balancers, Network Load Balancers, and Gateway Load Balancers:    stickiness.enabled - Indicates whether target stickiness is enabled. The value is true or false. The default is false.    stickiness.type - Indicates the type of stickiness. The possible values are:     lb_cookie and app_cookie for Application Load Balancers    source_ip for Network Load Balancers    source_ip_dest_ip and source_ip_dest_ip_proto for Gateway Load Balancers     The following attributes are supported only if the load balancer is an Application Load Balancer and the target is an instance or an IP address:    load_balancing.algorithm.type - The load balancing algorithm determines how the load balancer selects targets when routing requests. The value is round_robin or least_outstanding_requests. The default is round_robin.    slow_start.duration_seconds - The time period, in seconds, during which a newly registered target receives an increasing share of the traffic to the target group. After this time period ends, the target receives its full share of traffic. The range is 30-900 seconds (15 minutes). The default is 0 seconds (disabled).    stickiness.app_cookie.cookie_name - Indicates the name of the application-based cookie. Names that start with the following prefixes are not allowed: AWSALB, AWSALBAPP, and AWSALBTG; they're reserved for use by the load balancer.    stickiness.app_cookie.duration_seconds - The time period, in seconds, during which requests from a client should be routed to the same target. After this time period expires, the application-based cookie is considered stale. The range is 1 second to 1 week (604800 seconds). The default value is 1 day (86400 seconds).    stickiness.lb_cookie.duration_seconds - The time period, in seconds, during which requests from a client should be routed to the same target. After this time period expires, the load balancer-generated cookie is considered stale. The range is 1 second to 1 week (604800 seconds). The default value is 1 day (86400 seconds).   The following attribute is supported only if the load balancer is an Application Load Balancer and the target is a Lambda function:    lambda.multi_value_headers.enabled - Indicates whether the request and response headers that are exchanged between the load balancer and the Lambda function include arrays of values or strings. The value is true or false. The default is false. If the value is false and the request contains a duplicate header field name or query parameter key, the load balancer uses the last value sent by the client.   The following attributes are supported only by Network Load Balancers:    deregistration_delay.connection_termination.enabled - Indicates whether the load balancer terminates connections at the end of the deregistration timeout. The value is true or false. The default is false.    preserve_client_ip.enabled - Indicates whether client IP preservation is enabled. The value is true or false. The default is disabled if the target group type is IP address and the target group protocol is TCP or TLS. Otherwise, the default is enabled. Client IP preservation cannot be disabled for UDP and TCP_UDP target groups.    proxy_protocol_v2.enabled - Indicates whether Proxy Protocol version 2 is enabled. The value is true or false. The default is false.  
+     * The name of the attribute. The following attributes are supported by all load balancers:    deregistration_delay.timeout_seconds - The amount of time, in seconds, for Elastic Load Balancing to wait before changing the state of a deregistering target from draining to unused. The range is 0-3600 seconds. The default value is 300 seconds. If the target is a Lambda function, this attribute is not supported.    stickiness.enabled - Indicates whether target stickiness is enabled. The value is true or false. The default is false.    stickiness.type - Indicates the type of stickiness. The possible values are:    lb_cookie and app_cookie for Application Load Balancers.    source_ip for Network Load Balancers.    source_ip_dest_ip and source_ip_dest_ip_proto for Gateway Load Balancers.     The following attributes are supported by Application Load Balancers and Network Load Balancers:    load_balancing.cross_zone.enabled - Indicates whether cross zone load balancing is enabled. The value is true, false or use_load_balancer_configuration. The default is use_load_balancer_configuration.    target_group_health.dns_failover.minimum_healthy_targets.count - The minimum number of targets that must be healthy. If the number of healthy targets is below this value, mark the zone as unhealthy in DNS, so that traffic is routed only to healthy zones. The possible values are off or an integer from 1 to the maximum number of targets. The default is off.    target_group_health.dns_failover.minimum_healthy_targets.percentage - The minimum percentage of targets that must be healthy. If the percentage of healthy targets is below this value, mark the zone as unhealthy in DNS, so that traffic is routed only to healthy zones. The possible values are off or an integer from 1 to 100. The default is off.    target_group_health.unhealthy_state_routing.minimum_healthy_targets.count - The minimum number of targets that must be healthy. If the number of healthy targets is below this value, send traffic to all targets, including unhealthy targets. The possible values are 1 to the maximum number of targets. The default is 1.    target_group_health.unhealthy_state_routing.minimum_healthy_targets.percentage - The minimum percentage of targets that must be healthy. If the percentage of healthy targets is below this value, send traffic to all targets, including unhealthy targets. The possible values are off or an integer from 1 to 100. The default is off.   The following attributes are supported only if the load balancer is an Application Load Balancer and the target is an instance or an IP address:    load_balancing.algorithm.type - The load balancing algorithm determines how the load balancer selects targets when routing requests. The value is round_robin or least_outstanding_requests. The default is round_robin.    slow_start.duration_seconds - The time period, in seconds, during which a newly registered target receives an increasing share of the traffic to the target group. After this time period ends, the target receives its full share of traffic. The range is 30-900 seconds (15 minutes). The default is 0 seconds (disabled).    stickiness.app_cookie.cookie_name - Indicates the name of the application-based cookie. Names that start with the following prefixes are not allowed: AWSALB, AWSALBAPP, and AWSALBTG; they're reserved for use by the load balancer.    stickiness.app_cookie.duration_seconds - The time period, in seconds, during which requests from a client should be routed to the same target. After this time period expires, the application-based cookie is considered stale. The range is 1 second to 1 week (604800 seconds). The default value is 1 day (86400 seconds).    stickiness.lb_cookie.duration_seconds - The time period, in seconds, during which requests from a client should be routed to the same target. After this time period expires, the load balancer-generated cookie is considered stale. The range is 1 second to 1 week (604800 seconds). The default value is 1 day (86400 seconds).    The following attribute is supported only if the load balancer is an Application Load Balancer and the target is a Lambda function:    lambda.multi_value_headers.enabled - Indicates whether the request and response headers that are exchanged between the load balancer and the Lambda function include arrays of values or strings. The value is true or false. The default is false. If the value is false and the request contains a duplicate header field name or query parameter key, the load balancer uses the last value sent by the client.   The following attributes are supported only by Network Load Balancers:    deregistration_delay.connection_termination.enabled - Indicates whether the load balancer terminates connections at the end of the deregistration timeout. The value is true or false. The default is false.    preserve_client_ip.enabled - Indicates whether client IP preservation is enabled. The value is true or false. The default is disabled if the target group type is IP address and the target group protocol is TCP or TLS. Otherwise, the default is enabled. Client IP preservation cannot be disabled for UDP and TCP_UDP target groups.    proxy_protocol_v2.enabled - Indicates whether Proxy Protocol version 2 is enabled. The value is true or false. The default is false.    The following attributes are supported only by Gateway Load Balancers:    target_failover.on_deregistration - Indicates how the Gateway Load Balancer handles existing flows when a target is deregistered. The possible values are rebalance and no_rebalance. The default is no_rebalance. The two attributes (target_failover.on_deregistration and target_failover.on_unhealthy) can't be set independently. The value you set for both attributes must be the same.     target_failover.on_unhealthy - Indicates how the Gateway Load Balancer handles existing flows when a target is unhealthy. The possible values are rebalance and no_rebalance. The default is no_rebalance. The two attributes (target_failover.on_deregistration and target_failover.on_unhealthy) cannot be set independently. The value you set for both attributes must be the same.   
      */
     Key?: TargetGroupAttributeKey;
     /**

package/node_modules/aws-sdk/clients/emrcontainers.d.ts

@@ -19,6 +19,14 @@ declare class EMRcontainers extends Service {
    * Cancels a job run. A job run is a unit of work, such as a Spark jar, PySpark script, or SparkSQL query, that you submit to Amazon EMR on EKS.
    */
   cancelJobRun(callback?: (err: AWSError, data: EMRcontainers.Types.CancelJobRunResponse) => void): Request<EMRcontainers.Types.CancelJobRunResponse, AWSError>;
+  /**
+   * Creates a job template. Job template stores values of StartJobRun API request in a template and can be used to start a job run. Job template allows two use cases: avoid repeating recurring StartJobRun API request values, enforcing certain values in StartJobRun API request.
+   */
+  createJobTemplate(params: EMRcontainers.Types.CreateJobTemplateRequest, callback?: (err: AWSError, data: EMRcontainers.Types.CreateJobTemplateResponse) => void): Request<EMRcontainers.Types.CreateJobTemplateResponse, AWSError>;
+  /**
+   * Creates a job template. Job template stores values of StartJobRun API request in a template and can be used to start a job run. Job template allows two use cases: avoid repeating recurring StartJobRun API request values, enforcing certain values in StartJobRun API request.
+   */
+  createJobTemplate(callback?: (err: AWSError, data: EMRcontainers.Types.CreateJobTemplateResponse) => void): Request<EMRcontainers.Types.CreateJobTemplateResponse, AWSError>;
   /**
    * Creates a managed endpoint. A managed endpoint is a gateway that connects EMR Studio to Amazon EMR on EKS so that EMR Studio can communicate with your virtual cluster.
    */
@@ -35,6 +43,14 @@ declare class EMRcontainers extends Service {
    * Creates a virtual cluster. Virtual cluster is a managed entity on Amazon EMR on EKS. You can create, describe, list and delete virtual clusters. They do not consume any additional resource in your system. A single virtual cluster maps to a single Kubernetes namespace. Given this relationship, you can model virtual clusters the same way you model Kubernetes namespaces to meet your requirements.
    */
   createVirtualCluster(callback?: (err: AWSError, data: EMRcontainers.Types.CreateVirtualClusterResponse) => void): Request<EMRcontainers.Types.CreateVirtualClusterResponse, AWSError>;
+  /**
+   * Deletes a job template. Job template stores values of StartJobRun API request in a template and can be used to start a job run. Job template allows two use cases: avoid repeating recurring StartJobRun API request values, enforcing certain values in StartJobRun API request.
+   */
+  deleteJobTemplate(params: EMRcontainers.Types.DeleteJobTemplateRequest, callback?: (err: AWSError, data: EMRcontainers.Types.DeleteJobTemplateResponse) => void): Request<EMRcontainers.Types.DeleteJobTemplateResponse, AWSError>;
+  /**
+   * Deletes a job template. Job template stores values of StartJobRun API request in a template and can be used to start a job run. Job template allows two use cases: avoid repeating recurring StartJobRun API request values, enforcing certain values in StartJobRun API request.
+   */
+  deleteJobTemplate(callback?: (err: AWSError, data: EMRcontainers.Types.DeleteJobTemplateResponse) => void): Request<EMRcontainers.Types.DeleteJobTemplateResponse, AWSError>;
   /**
    * Deletes a managed endpoint. A managed endpoint is a gateway that connects EMR Studio to Amazon EMR on EKS so that EMR Studio can communicate with your virtual cluster.
    */
@@ -59,6 +75,14 @@ declare class EMRcontainers extends Service {
    * Displays detailed information about a job run. A job run is a unit of work, such as a Spark jar, PySpark script, or SparkSQL query, that you submit to Amazon EMR on EKS.
    */
   describeJobRun(callback?: (err: AWSError, data: EMRcontainers.Types.DescribeJobRunResponse) => void): Request<EMRcontainers.Types.DescribeJobRunResponse, AWSError>;
+  /**
+   * Displays detailed information about a specified job template. Job template stores values of StartJobRun API request in a template and can be used to start a job run. Job template allows two use cases: avoid repeating recurring StartJobRun API request values, enforcing certain values in StartJobRun API request.
+   */
+  describeJobTemplate(params: EMRcontainers.Types.DescribeJobTemplateRequest, callback?: (err: AWSError, data: EMRcontainers.Types.DescribeJobTemplateResponse) => void): Request<EMRcontainers.Types.DescribeJobTemplateResponse, AWSError>;
+  /**
+   * Displays detailed information about a specified job template. Job template stores values of StartJobRun API request in a template and can be used to start a job run. Job template allows two use cases: avoid repeating recurring StartJobRun API request values, enforcing certain values in StartJobRun API request.
+   */
+  describeJobTemplate(callback?: (err: AWSError, data: EMRcontainers.Types.DescribeJobTemplateResponse) => void): Request<EMRcontainers.Types.DescribeJobTemplateResponse, AWSError>;
   /**
    * Displays detailed information about a managed endpoint. A managed endpoint is a gateway that connects EMR Studio to Amazon EMR on EKS so that EMR Studio can communicate with your virtual cluster.
    */
@@ -83,6 +107,14 @@ declare class EMRcontainers extends Service {
    * Lists job runs based on a set of parameters. A job run is a unit of work, such as a Spark jar, PySpark script, or SparkSQL query, that you submit to Amazon EMR on EKS.
    */
   listJobRuns(callback?: (err: AWSError, data: EMRcontainers.Types.ListJobRunsResponse) => void): Request<EMRcontainers.Types.ListJobRunsResponse, AWSError>;
+  /**
+   * Lists job templates based on a set of parameters. Job template stores values of StartJobRun API request in a template and can be used to start a job run. Job template allows two use cases: avoid repeating recurring StartJobRun API request values, enforcing certain values in StartJobRun API request.
+   */
+  listJobTemplates(params: EMRcontainers.Types.ListJobTemplatesRequest, callback?: (err: AWSError, data: EMRcontainers.Types.ListJobTemplatesResponse) => void): Request<EMRcontainers.Types.ListJobTemplatesResponse, AWSError>;
+  /**
+   * Lists job templates based on a set of parameters. Job template stores values of StartJobRun API request in a template and can be used to start a job run. Job template allows two use cases: avoid repeating recurring StartJobRun API request values, enforcing certain values in StartJobRun API request.
+   */
+  listJobTemplates(callback?: (err: AWSError, data: EMRcontainers.Types.ListJobTemplatesResponse) => void): Request<EMRcontainers.Types.ListJobTemplatesResponse, AWSError>;
   /**
    * Lists managed endpoints based on a set of parameters. A managed endpoint is a gateway that connects EMR Studio to Amazon EMR on EKS so that EMR Studio can communicate with your virtual cluster.
    */
@@ -223,6 +255,46 @@ declare namespace EMRcontainers {
     info?: ContainerInfo;
   }
   export type ContainerProviderType = "EKS"|string;
+  export interface CreateJobTemplateRequest {
+    /**
+     * The specified name of the job template.
+     */
+    name: ResourceNameString;
+    /**
+     * The client token of the job template.
+     */
+    clientToken: ClientToken;
+    /**
+     * The job template data which holds values of StartJobRun API request.
+     */
+    jobTemplateData: JobTemplateData;
+    /**
+     * The tags that are associated with the job template.
+     */
+    tags?: TagMap;
+    /**
+     * The KMS key ARN used to encrypt the job template.
+     */
+    kmsKeyArn?: KmsKeyArn;
+  }
+  export interface CreateJobTemplateResponse {
+    /**
+     * This output display the created job template ID.
+     */
+    id?: ResourceIdString;
+    /**
+     * This output displays the name of the created job template.
+     */
+    name?: ResourceNameString;
+    /**
+     * This output display the ARN of the created job template.
+     */
+    arn?: JobTemplateArn;
+    /**
+     * This output displays the date and time when the job template was created.
+     */
+    createdAt?: _Date;
+  }
   export interface CreateManagedEndpointRequest {
     /**
      * The name of the managed endpoint.
@@ -312,6 +384,18 @@ declare namespace EMRcontainers {
     arn?: VirtualClusterArn;
   }
   export type _Date = Date;
+  export interface DeleteJobTemplateRequest {
+    /**
+     * The ID of the job template that will be deleted.
+     */
+    id: ResourceIdString;
+  }
+  export interface DeleteJobTemplateResponse {
+    /**
+     * This output contains the ID of the job template that was deleted.
+     */
+    id?: ResourceIdString;
+  }
   export interface DeleteManagedEndpointRequest {
     /**
      * The ID of the managed endpoint.
@@ -360,6 +444,18 @@ declare namespace EMRcontainers {
      */
     jobRun?: JobRun;
   }
+  export interface DescribeJobTemplateRequest {
+    /**
+     * The ID of the job template that will be described.
+     */
+    id: ResourceIdString;
+  }
+  export interface DescribeJobTemplateResponse {
+    /**
+     * This output displays information about the specified job template.
+     */
+    jobTemplate?: JobTemplate;
+  }
   export interface DescribeManagedEndpointRequest {
     /**
      * This output displays ID of the managed endpoint.
@@ -560,6 +656,70 @@ declare namespace EMRcontainers {
   export type JobRunState = "PENDING"|"SUBMITTED"|"RUNNING"|"FAILED"|"CANCELLED"|"CANCEL_PENDING"|"COMPLETED"|string;
   export type JobRunStates = JobRunState[];
   export type JobRuns = JobRun[];
+  export interface JobTemplate {
+    /**
+     * The name of the job template.
+     */
+    name?: ResourceNameString;
+    /**
+     * The ID of the job template.
+     */
+    id?: ResourceIdString;
+    /**
+     * The ARN of the job template.
+     */
+    arn?: JobTemplateArn;
+    /**
+     *  The date and time when the job template was created.
+     */
+    createdAt?: _Date;
+    /**
+     *  The user who created the job template.
+     */
+    createdBy?: RequestIdentityUserArn;
+    /**
+     * The tags assigned to the job template.
+     */
+    tags?: TagMap;
+    /**
+     * The job template data which holds values of StartJobRun API request.
+     */
+    jobTemplateData: JobTemplateData;
+    /**
+     *  The KMS key ARN used to encrypt the job template.
+     */
+    kmsKeyArn?: KmsKeyArn;
+    /**
+     * The error message in case the decryption of job template fails.
+     */
+    decryptionError?: String2048;
+  }
+  export type JobTemplateArn = string;
+  export interface JobTemplateData {
+    /**
+     * The execution role ARN of the job run.
+     */
+    executionRoleArn: ParametricIAMRoleArn;
+    /**
+     *  The release version of Amazon EMR.
+     */
+    releaseLabel: ParametricReleaseLabel;
+    /**
+     *  The configuration settings that are used to override defaults configuration.
+     */
+    configurationOverrides?: ParametricConfigurationOverrides;
+    jobDriver: JobDriver;
+    /**
+     * The configuration of parameters existing in the job template.
+     */
+    parameterConfiguration?: TemplateParameterConfigurationMap;
+    /**
+     * The tags assigned to jobs started using the job template.
+     */
+    jobTags?: TagMap;
+  }
+  export type JobTemplates = JobTemplate[];
+  export type KmsKeyArn = string;
   export type KubernetesNamespace = string;
   export interface ListJobRunsRequest {
     /**
@@ -601,6 +761,34 @@ declare namespace EMRcontainers {
      */
     nextToken?: NextToken;
   }
+  export interface ListJobTemplatesRequest {
+    /**
+     * The date and time after which the job templates were created.
+     */
+    createdAfter?: _Date;
+    /**
+     *  The date and time before which the job templates were created.
+     */
+    createdBefore?: _Date;
+    /**
+     *  The maximum number of job templates that can be listed.
+     */
+    maxResults?: JavaInteger;
+    /**
+     *  The token for the next set of job templates to return.
+     */
+    nextToken?: NextToken;
+  }
+  export interface ListJobTemplatesResponse {
+    /**
+     * This output lists information about the specified job templates.
+     */
+    templates?: JobTemplates;
+    /**
+     *  This output displays the token for the next set of job templates.
+     */
+    nextToken?: NextToken;
+  }
   export interface ListManagedEndpointsRequest {
     /**
      * The ID of the virtual cluster.
@@ -709,6 +897,48 @@ declare namespace EMRcontainers {
     s3MonitoringConfiguration?: S3MonitoringConfiguration;
   }
   export type NextToken = string;
+  export interface ParametricCloudWatchMonitoringConfiguration {
+    /**
+     *  The name of the log group for log publishing.
+     */
+    logGroupName?: TemplateParameter;
+    /**
+     *  The specified name prefix for log streams.
+     */
+    logStreamNamePrefix?: String256;
+  }
+  export interface ParametricConfigurationOverrides {
+    /**
+     *  The configurations for the application running by the job run.
+     */
+    applicationConfiguration?: ConfigurationList;
+    /**
+     *  The configurations for monitoring. 
+     */
+    monitoringConfiguration?: ParametricMonitoringConfiguration;
+  }
+  export type ParametricIAMRoleArn = string;
+  export interface ParametricMonitoringConfiguration {
+    /**
+     *  Monitoring configurations for the persistent application UI.
+     */
+    persistentAppUI?: TemplateParameter;
+    /**
+     *  Monitoring configurations for CloudWatch.
+     */
+    cloudWatchMonitoringConfiguration?: ParametricCloudWatchMonitoringConfiguration;
+    /**
+     *  Amazon S3 configuration for monitoring log publishing.
+     */
+    s3MonitoringConfiguration?: ParametricS3MonitoringConfiguration;
+  }
+  export type ParametricReleaseLabel = string;
+  export interface ParametricS3MonitoringConfiguration {
+    /**
+     * Amazon S3 destination URI for log publishing.
+     */
+    logUri?: UriString;
+  }
   export type PersistentAppUI = "ENABLED"|"DISABLED"|string;
   export type ReleaseLabel = string;
   export type RequestIdentityUserArn = string;
@@ -764,15 +994,15 @@ declare namespace EMRcontainers {
     /**
      * The execution role ARN for the job run.
      */
-    executionRoleArn: IAMRoleArn;
+    executionRoleArn?: IAMRoleArn;
     /**
      * The Amazon EMR release version to use for the job run.
      */
-    releaseLabel: ReleaseLabel;
+    releaseLabel?: ReleaseLabel;
     /**
      * The job driver for the job run.
      */
-    jobDriver: JobDriver;
+    jobDriver?: JobDriver;
     /**
      * The configuration overrides for the job run.
      */
@@ -781,6 +1011,14 @@ declare namespace EMRcontainers {
      * The tags assigned to job runs.
      */
     tags?: TagMap;
+    /**
+     * The job template ID to be used to start the job run.
+     */
+    jobTemplateId?: ResourceIdString;
+    /**
+     * The values of job template parameters to start a job run.
+     */
+    jobTemplateParameters?: TemplateParameterInputMap;
   }
   export interface StartJobRunResponse {
     /**
@@ -802,6 +1040,7 @@ declare namespace EMRcontainers {
   }
   export type String1024 = string;
   export type String128 = string;
+  export type String2048 = string;
   export type String256 = string;
   export type StringEmpty256 = string;
   export type SubnetIds = String256[];
@@ -819,6 +1058,21 @@ declare namespace EMRcontainers {
   }
   export interface TagResourceResponse {
   }
+  export type TemplateParameter = string;
+  export interface TemplateParameterConfiguration {
+    /**
+     * The type of the job template parameter. Allowed values are: ‘String’, ‘Number’.
+     */
+    type?: TemplateParameterDataType;
+    /**
+     * The default value for the job template parameter.
+     */
+    defaultValue?: String1024;
+  }
+  export type TemplateParameterConfigurationMap = {[key: string]: TemplateParameterConfiguration};
+  export type TemplateParameterDataType = "NUMBER"|"STRING"|string;
+  export type TemplateParameterInputMap = {[key: string]: String1024};
+  export type TemplateParameterName = string;
   export interface UntagResourceRequest {
     /**
      * The ARN of resources.