cdk-lambda-subminute 2.0.522 → 2.0.524

package/node_modules/aws-sdk/clients/s3.d.ts

@@ -26,19 +26,19 @@ declare class S3 extends S3Customizations {
    */
   abortMultipartUpload(callback?: (err: AWSError, data: S3.Types.AbortMultipartUploadOutput) => void): Request<S3.Types.AbortMultipartUploadOutput, AWSError>;
   /**
-   * Completes a multipart upload by assembling previously uploaded parts. You first initiate the multipart upload and then upload all parts using the UploadPart operation or the UploadPartCopy operation. After successfully uploading all relevant parts of an upload, you call this CompleteMultipartUpload operation to complete the upload. Upon receiving this request, Amazon S3 concatenates all the parts in ascending order by part number to create a new object. In the CompleteMultipartUpload request, you must provide the parts list and ensure that the parts list is complete. The CompleteMultipartUpload API operation concatenates the parts that you provide in the list. For each part in the list, you must provide the PartNumber value and the ETag value that are returned after that part was uploaded. The processing of a CompleteMultipartUpload request could take several minutes to finalize. After Amazon S3 begins processing the request, it sends an HTTP response header that specifies a 200 OK response. While processing is in progress, Amazon S3 periodically sends white space characters to keep the connection from timing out. A request could fail after the initial 200 OK response has been sent. This means that a 200 OK response can contain either a success or an error. The error response might be embedded in the 200 OK response. If you call this API operation directly, make sure to design your application to parse the contents of the response and handle it appropriately. If you use Amazon Web Services SDKs, SDKs handle this condition. The SDKs detect the embedded error and apply error handling per your configuration settings (including automatically retrying the request as appropriate). If the condition persists, the SDKs throw an exception (or, for the SDKs that don't use exceptions, they return an error).  Note that if CompleteMultipartUpload fails, applications should be prepared to retry any failed requests (including 500 error responses). For more information, see Amazon S3 Error Best Practices.  You can't use Content-Type: application/x-www-form-urlencoded for the CompleteMultipartUpload requests. Also, if you don't provide a Content-Type header, CompleteMultipartUpload can still return a 200 OK response.  For more information about multipart uploads, see Uploading Objects Using Multipart Upload in the Amazon S3 User Guide.   Directory buckets - For directory buckets, you must make requests for this API operation to the Zonal endpoint. These endpoints support virtual-hosted-style requests in the format https://bucket_name.s3express-az_id.region.amazonaws.com/key-name . Path-style requests are not supported. For more information, see Regional and Zonal endpoints in the Amazon S3 User Guide.   Permissions     General purpose bucket permissions - For information about permissions required to use the multipart upload API, see Multipart Upload and Permissions in the Amazon S3 User Guide.    Directory bucket permissions - To grant access to this API operation on a directory bucket, we recommend that you use the  CreateSession  API operation for session-based authorization. Specifically, you grant the s3express:CreateSession permission to the directory bucket in a bucket policy or an IAM identity-based policy. Then, you make the CreateSession API call on the bucket to obtain a session token. With the session token in your request header, you can make API requests to this operation. After the session token expires, you make another CreateSession API call to generate a new session token for use. Amazon Web Services CLI or SDKs create session and refresh the session token automatically to avoid service interruptions when a session expires. For more information about authorization, see  CreateSession .    If you provide an additional checksum value in your MultipartUpload requests and the object is encrypted with Key Management Service, you must have permission to use the kms:Decrypt action for the CompleteMultipartUpload request to succeed.    Special errors    Error Code: EntityTooSmall    Description: Your proposed upload is smaller than the minimum allowed object size. Each part must be at least 5 MB in size, except the last part.   HTTP Status Code: 400 Bad Request     Error Code: InvalidPart    Description: One or more of the specified parts could not be found. The part might not have been uploaded, or the specified ETag might not have matched the uploaded part's ETag.   HTTP Status Code: 400 Bad Request     Error Code: InvalidPartOrder    Description: The list of parts was not in ascending order. The parts list must be specified in order by part number.   HTTP Status Code: 400 Bad Request     Error Code: NoSuchUpload    Description: The specified multipart upload does not exist. The upload ID might be invalid, or the multipart upload might have been aborted or completed.   HTTP Status Code: 404 Not Found      HTTP Host header syntax   Directory buckets  - The HTTP Host header syntax is  Bucket_name.s3express-az_id.region.amazonaws.com.   The following operations are related to CompleteMultipartUpload:    CreateMultipartUpload     UploadPart     AbortMultipartUpload     ListParts     ListMultipartUploads   
+   * Completes a multipart upload by assembling previously uploaded parts. You first initiate the multipart upload and then upload all parts using the UploadPart operation or the UploadPartCopy operation. After successfully uploading all relevant parts of an upload, you call this CompleteMultipartUpload operation to complete the upload. Upon receiving this request, Amazon S3 concatenates all the parts in ascending order by part number to create a new object. In the CompleteMultipartUpload request, you must provide the parts list and ensure that the parts list is complete. The CompleteMultipartUpload API operation concatenates the parts that you provide in the list. For each part in the list, you must provide the PartNumber value and the ETag value that are returned after that part was uploaded. The processing of a CompleteMultipartUpload request could take several minutes to finalize. After Amazon S3 begins processing the request, it sends an HTTP response header that specifies a 200 OK response. While processing is in progress, Amazon S3 periodically sends white space characters to keep the connection from timing out. A request could fail after the initial 200 OK response has been sent. This means that a 200 OK response can contain either a success or an error. The error response might be embedded in the 200 OK response. If you call this API operation directly, make sure to design your application to parse the contents of the response and handle it appropriately. If you use Amazon Web Services SDKs, SDKs handle this condition. The SDKs detect the embedded error and apply error handling per your configuration settings (including automatically retrying the request as appropriate). If the condition persists, the SDKs throw an exception (or, for the SDKs that don't use exceptions, they return an error).  Note that if CompleteMultipartUpload fails, applications should be prepared to retry any failed requests (including 500 error responses). For more information, see Amazon S3 Error Best Practices.  You can't use Content-Type: application/x-www-form-urlencoded for the CompleteMultipartUpload requests. Also, if you don't provide a Content-Type header, CompleteMultipartUpload can still return a 200 OK response.  For more information about multipart uploads, see Uploading Objects Using Multipart Upload in the Amazon S3 User Guide.   Directory buckets - For directory buckets, you must make requests for this API operation to the Zonal endpoint. These endpoints support virtual-hosted-style requests in the format https://bucket_name.s3express-az_id.region.amazonaws.com/key-name . Path-style requests are not supported. For more information, see Regional and Zonal endpoints in the Amazon S3 User Guide.   Permissions     General purpose bucket permissions - For information about permissions required to use the multipart upload API, see Multipart Upload and Permissions in the Amazon S3 User Guide. If you provide an additional checksum value in your MultipartUpload requests and the object is encrypted with Key Management Service, you must have permission to use the kms:Decrypt action for the CompleteMultipartUpload request to succeed.    Directory bucket permissions - To grant access to this API operation on a directory bucket, we recommend that you use the  CreateSession  API operation for session-based authorization. Specifically, you grant the s3express:CreateSession permission to the directory bucket in a bucket policy or an IAM identity-based policy. Then, you make the CreateSession API call on the bucket to obtain a session token. With the session token in your request header, you can make API requests to this operation. After the session token expires, you make another CreateSession API call to generate a new session token for use. Amazon Web Services CLI or SDKs create session and refresh the session token automatically to avoid service interruptions when a session expires. For more information about authorization, see  CreateSession . If the object is encrypted with SSE-KMS, you must also have the kms:GenerateDataKey and kms:Decrypt permissions in IAM identity-based policies and KMS key policies for the KMS key.    Special errors    Error Code: EntityTooSmall    Description: Your proposed upload is smaller than the minimum allowed object size. Each part must be at least 5 MB in size, except the last part.   HTTP Status Code: 400 Bad Request     Error Code: InvalidPart    Description: One or more of the specified parts could not be found. The part might not have been uploaded, or the specified ETag might not have matched the uploaded part's ETag.   HTTP Status Code: 400 Bad Request     Error Code: InvalidPartOrder    Description: The list of parts was not in ascending order. The parts list must be specified in order by part number.   HTTP Status Code: 400 Bad Request     Error Code: NoSuchUpload    Description: The specified multipart upload does not exist. The upload ID might be invalid, or the multipart upload might have been aborted or completed.   HTTP Status Code: 404 Not Found      HTTP Host header syntax   Directory buckets  - The HTTP Host header syntax is  Bucket_name.s3express-az_id.region.amazonaws.com.   The following operations are related to CompleteMultipartUpload:    CreateMultipartUpload     UploadPart     AbortMultipartUpload     ListParts     ListMultipartUploads   
    */
   completeMultipartUpload(params: S3.Types.CompleteMultipartUploadRequest, callback?: (err: AWSError, data: S3.Types.CompleteMultipartUploadOutput) => void): Request<S3.Types.CompleteMultipartUploadOutput, AWSError>;
   /**
-   * Completes a multipart upload by assembling previously uploaded parts. You first initiate the multipart upload and then upload all parts using the UploadPart operation or the UploadPartCopy operation. After successfully uploading all relevant parts of an upload, you call this CompleteMultipartUpload operation to complete the upload. Upon receiving this request, Amazon S3 concatenates all the parts in ascending order by part number to create a new object. In the CompleteMultipartUpload request, you must provide the parts list and ensure that the parts list is complete. The CompleteMultipartUpload API operation concatenates the parts that you provide in the list. For each part in the list, you must provide the PartNumber value and the ETag value that are returned after that part was uploaded. The processing of a CompleteMultipartUpload request could take several minutes to finalize. After Amazon S3 begins processing the request, it sends an HTTP response header that specifies a 200 OK response. While processing is in progress, Amazon S3 periodically sends white space characters to keep the connection from timing out. A request could fail after the initial 200 OK response has been sent. This means that a 200 OK response can contain either a success or an error. The error response might be embedded in the 200 OK response. If you call this API operation directly, make sure to design your application to parse the contents of the response and handle it appropriately. If you use Amazon Web Services SDKs, SDKs handle this condition. The SDKs detect the embedded error and apply error handling per your configuration settings (including automatically retrying the request as appropriate). If the condition persists, the SDKs throw an exception (or, for the SDKs that don't use exceptions, they return an error).  Note that if CompleteMultipartUpload fails, applications should be prepared to retry any failed requests (including 500 error responses). For more information, see Amazon S3 Error Best Practices.  You can't use Content-Type: application/x-www-form-urlencoded for the CompleteMultipartUpload requests. Also, if you don't provide a Content-Type header, CompleteMultipartUpload can still return a 200 OK response.  For more information about multipart uploads, see Uploading Objects Using Multipart Upload in the Amazon S3 User Guide.   Directory buckets - For directory buckets, you must make requests for this API operation to the Zonal endpoint. These endpoints support virtual-hosted-style requests in the format https://bucket_name.s3express-az_id.region.amazonaws.com/key-name . Path-style requests are not supported. For more information, see Regional and Zonal endpoints in the Amazon S3 User Guide.   Permissions     General purpose bucket permissions - For information about permissions required to use the multipart upload API, see Multipart Upload and Permissions in the Amazon S3 User Guide.    Directory bucket permissions - To grant access to this API operation on a directory bucket, we recommend that you use the  CreateSession  API operation for session-based authorization. Specifically, you grant the s3express:CreateSession permission to the directory bucket in a bucket policy or an IAM identity-based policy. Then, you make the CreateSession API call on the bucket to obtain a session token. With the session token in your request header, you can make API requests to this operation. After the session token expires, you make another CreateSession API call to generate a new session token for use. Amazon Web Services CLI or SDKs create session and refresh the session token automatically to avoid service interruptions when a session expires. For more information about authorization, see  CreateSession .    If you provide an additional checksum value in your MultipartUpload requests and the object is encrypted with Key Management Service, you must have permission to use the kms:Decrypt action for the CompleteMultipartUpload request to succeed.    Special errors    Error Code: EntityTooSmall    Description: Your proposed upload is smaller than the minimum allowed object size. Each part must be at least 5 MB in size, except the last part.   HTTP Status Code: 400 Bad Request     Error Code: InvalidPart    Description: One or more of the specified parts could not be found. The part might not have been uploaded, or the specified ETag might not have matched the uploaded part's ETag.   HTTP Status Code: 400 Bad Request     Error Code: InvalidPartOrder    Description: The list of parts was not in ascending order. The parts list must be specified in order by part number.   HTTP Status Code: 400 Bad Request     Error Code: NoSuchUpload    Description: The specified multipart upload does not exist. The upload ID might be invalid, or the multipart upload might have been aborted or completed.   HTTP Status Code: 404 Not Found      HTTP Host header syntax   Directory buckets  - The HTTP Host header syntax is  Bucket_name.s3express-az_id.region.amazonaws.com.   The following operations are related to CompleteMultipartUpload:    CreateMultipartUpload     UploadPart     AbortMultipartUpload     ListParts     ListMultipartUploads   
+   * Completes a multipart upload by assembling previously uploaded parts. You first initiate the multipart upload and then upload all parts using the UploadPart operation or the UploadPartCopy operation. After successfully uploading all relevant parts of an upload, you call this CompleteMultipartUpload operation to complete the upload. Upon receiving this request, Amazon S3 concatenates all the parts in ascending order by part number to create a new object. In the CompleteMultipartUpload request, you must provide the parts list and ensure that the parts list is complete. The CompleteMultipartUpload API operation concatenates the parts that you provide in the list. For each part in the list, you must provide the PartNumber value and the ETag value that are returned after that part was uploaded. The processing of a CompleteMultipartUpload request could take several minutes to finalize. After Amazon S3 begins processing the request, it sends an HTTP response header that specifies a 200 OK response. While processing is in progress, Amazon S3 periodically sends white space characters to keep the connection from timing out. A request could fail after the initial 200 OK response has been sent. This means that a 200 OK response can contain either a success or an error. The error response might be embedded in the 200 OK response. If you call this API operation directly, make sure to design your application to parse the contents of the response and handle it appropriately. If you use Amazon Web Services SDKs, SDKs handle this condition. The SDKs detect the embedded error and apply error handling per your configuration settings (including automatically retrying the request as appropriate). If the condition persists, the SDKs throw an exception (or, for the SDKs that don't use exceptions, they return an error).  Note that if CompleteMultipartUpload fails, applications should be prepared to retry any failed requests (including 500 error responses). For more information, see Amazon S3 Error Best Practices.  You can't use Content-Type: application/x-www-form-urlencoded for the CompleteMultipartUpload requests. Also, if you don't provide a Content-Type header, CompleteMultipartUpload can still return a 200 OK response.  For more information about multipart uploads, see Uploading Objects Using Multipart Upload in the Amazon S3 User Guide.   Directory buckets - For directory buckets, you must make requests for this API operation to the Zonal endpoint. These endpoints support virtual-hosted-style requests in the format https://bucket_name.s3express-az_id.region.amazonaws.com/key-name . Path-style requests are not supported. For more information, see Regional and Zonal endpoints in the Amazon S3 User Guide.   Permissions     General purpose bucket permissions - For information about permissions required to use the multipart upload API, see Multipart Upload and Permissions in the Amazon S3 User Guide. If you provide an additional checksum value in your MultipartUpload requests and the object is encrypted with Key Management Service, you must have permission to use the kms:Decrypt action for the CompleteMultipartUpload request to succeed.    Directory bucket permissions - To grant access to this API operation on a directory bucket, we recommend that you use the  CreateSession  API operation for session-based authorization. Specifically, you grant the s3express:CreateSession permission to the directory bucket in a bucket policy or an IAM identity-based policy. Then, you make the CreateSession API call on the bucket to obtain a session token. With the session token in your request header, you can make API requests to this operation. After the session token expires, you make another CreateSession API call to generate a new session token for use. Amazon Web Services CLI or SDKs create session and refresh the session token automatically to avoid service interruptions when a session expires. For more information about authorization, see  CreateSession . If the object is encrypted with SSE-KMS, you must also have the kms:GenerateDataKey and kms:Decrypt permissions in IAM identity-based policies and KMS key policies for the KMS key.    Special errors    Error Code: EntityTooSmall    Description: Your proposed upload is smaller than the minimum allowed object size. Each part must be at least 5 MB in size, except the last part.   HTTP Status Code: 400 Bad Request     Error Code: InvalidPart    Description: One or more of the specified parts could not be found. The part might not have been uploaded, or the specified ETag might not have matched the uploaded part's ETag.   HTTP Status Code: 400 Bad Request     Error Code: InvalidPartOrder    Description: The list of parts was not in ascending order. The parts list must be specified in order by part number.   HTTP Status Code: 400 Bad Request     Error Code: NoSuchUpload    Description: The specified multipart upload does not exist. The upload ID might be invalid, or the multipart upload might have been aborted or completed.   HTTP Status Code: 404 Not Found      HTTP Host header syntax   Directory buckets  - The HTTP Host header syntax is  Bucket_name.s3express-az_id.region.amazonaws.com.   The following operations are related to CompleteMultipartUpload:    CreateMultipartUpload     UploadPart     AbortMultipartUpload     ListParts     ListMultipartUploads   
    */
   completeMultipartUpload(callback?: (err: AWSError, data: S3.Types.CompleteMultipartUploadOutput) => void): Request<S3.Types.CompleteMultipartUploadOutput, AWSError>;
   /**
-   * Creates a copy of an object that is already stored in Amazon S3.  You can store individual objects of up to 5 TB in Amazon S3. You create a copy of your object up to 5 GB in size in a single atomic action using this API. However, to copy an object greater than 5 GB, you must use the multipart upload Upload Part - Copy (UploadPartCopy) API. For more information, see Copy Object Using the REST Multipart Upload API.  You can copy individual objects between general purpose buckets, between directory buckets, and between general purpose buckets and directory buckets.    Amazon S3 supports copy operations using Multi-Region Access Points only as a destination when using the Multi-Region Access Point ARN.     Directory buckets  - For directory buckets, you must make requests for this API operation to the Zonal endpoint. These endpoints support virtual-hosted-style requests in the format https://bucket_name.s3express-az_id.region.amazonaws.com/key-name . Path-style requests are not supported. For more information, see Regional and Zonal endpoints in the Amazon S3 User Guide.   VPC endpoints don't support cross-Region requests (including copies). If you're using VPC endpoints, your source and destination buckets should be in the same Amazon Web Services Region as your VPC endpoint.    Both the Region that you want to copy the object from and the Region that you want to copy the object to must be enabled for your account. For more information about how to enable a Region for your account, see Enable or disable a Region for standalone accounts in the Amazon Web Services Account Management Guide.  Amazon S3 transfer acceleration does not support cross-Region copies. If you request a cross-Region copy using a transfer acceleration endpoint, you get a 400 Bad Request error. For more information, see Transfer Acceleration.   Authentication and authorization  All CopyObject requests must be authenticated and signed by using IAM credentials (access key ID and secret access key for the IAM identities). All headers with the x-amz- prefix, including x-amz-copy-source, must be signed. For more information, see REST Authentication.  Directory buckets - You must use the IAM credentials to authenticate and authorize your access to the CopyObject API operation, instead of using the temporary security credentials through the CreateSession API operation. Amazon Web Services CLI or SDKs handles authentication and authorization on your behalf.  Permissions  You must have read access to the source object and write access to the destination bucket.    General purpose bucket permissions - You must have permissions in an IAM policy based on the source and destination bucket types in a CopyObject operation.   If the source object is in a general purpose bucket, you must have  s3:GetObject  permission to read the source object that is being copied.    If the destination bucket is a general purpose bucket, you must have  s3:PutObject  permission to write the object copy to the destination bucket.       Directory bucket permissions - You must have permissions in a bucket policy or an IAM identity-based policy based on the source and destination bucket types in a CopyObject operation.   If the source object that you want to copy is in a directory bucket, you must have the  s3express:CreateSession  permission in the Action element of a policy to read the object. By default, the session is in the ReadWrite mode. If you want to restrict the access, you can explicitly set the s3express:SessionMode condition key to ReadOnly on the copy source bucket.   If the copy destination is a directory bucket, you must have the  s3express:CreateSession  permission in the Action element of a policy to write the object to the destination. The s3express:SessionMode condition key can't be set to ReadOnly on the copy destination bucket.    For example policies, see Example bucket policies for S3 Express One Zone and Amazon Web Services Identity and Access Management (IAM) identity-based policies for S3 Express One Zone in the Amazon S3 User Guide.    Response and special errors  When the request is an HTTP 1.1 request, the response is chunk encoded. When the request is not an HTTP 1.1 request, the response would not contain the Content-Length. You always need to read the entire response body to check if the copy succeeds.    If the copy is successful, you receive a response with information about the copied object.   A copy request might return an error when Amazon S3 receives the copy request or while Amazon S3 is copying the files. A 200 OK response can contain either a success or an error.   If the error occurs before the copy action starts, you receive a standard Amazon S3 error.   If the error occurs during the copy operation, the error response is embedded in the 200 OK response. For example, in a cross-region copy, you may encounter throttling and receive a 200 OK response. For more information, see Resolve the Error 200 response when copying objects to Amazon S3. The 200 OK status code means the copy was accepted, but it doesn't mean the copy is complete. Another example is when you disconnect from Amazon S3 before the copy is complete, Amazon S3 might cancel the copy and you may receive a 200 OK response. You must stay connected to Amazon S3 until the entire response is successfully received and processed. If you call this API operation directly, make sure to design your application to parse the content of the response and handle it appropriately. If you use Amazon Web Services SDKs, SDKs handle this condition. The SDKs detect the embedded error and apply error handling per your configuration settings (including automatically retrying the request as appropriate). If the condition persists, the SDKs throw an exception (or, for the SDKs that don't use exceptions, they return an error).      Charge  The copy request charge is based on the storage class and Region that you specify for the destination object. The request can also result in a data retrieval charge for the source if the source storage class bills for data retrieval. If the copy source is in a different region, the data transfer is billed to the copy source account. For pricing information, see Amazon S3 pricing.  HTTP Host header syntax   Directory buckets  - The HTTP Host header syntax is  Bucket_name.s3express-az_id.region.amazonaws.com.   The following operations are related to CopyObject:    PutObject     GetObject   
+   * Creates a copy of an object that is already stored in Amazon S3.  You can store individual objects of up to 5 TB in Amazon S3. You create a copy of your object up to 5 GB in size in a single atomic action using this API. However, to copy an object greater than 5 GB, you must use the multipart upload Upload Part - Copy (UploadPartCopy) API. For more information, see Copy Object Using the REST Multipart Upload API.  You can copy individual objects between general purpose buckets, between directory buckets, and between general purpose buckets and directory buckets.    Amazon S3 supports copy operations using Multi-Region Access Points only as a destination when using the Multi-Region Access Point ARN.     Directory buckets  - For directory buckets, you must make requests for this API operation to the Zonal endpoint. These endpoints support virtual-hosted-style requests in the format https://bucket_name.s3express-az_id.region.amazonaws.com/key-name . Path-style requests are not supported. For more information, see Regional and Zonal endpoints in the Amazon S3 User Guide.   VPC endpoints don't support cross-Region requests (including copies). If you're using VPC endpoints, your source and destination buckets should be in the same Amazon Web Services Region as your VPC endpoint.    Both the Region that you want to copy the object from and the Region that you want to copy the object to must be enabled for your account. For more information about how to enable a Region for your account, see Enable or disable a Region for standalone accounts in the Amazon Web Services Account Management Guide.  Amazon S3 transfer acceleration does not support cross-Region copies. If you request a cross-Region copy using a transfer acceleration endpoint, you get a 400 Bad Request error. For more information, see Transfer Acceleration.   Authentication and authorization  All CopyObject requests must be authenticated and signed by using IAM credentials (access key ID and secret access key for the IAM identities). All headers with the x-amz- prefix, including x-amz-copy-source, must be signed. For more information, see REST Authentication.  Directory buckets - You must use the IAM credentials to authenticate and authorize your access to the CopyObject API operation, instead of using the temporary security credentials through the CreateSession API operation. Amazon Web Services CLI or SDKs handles authentication and authorization on your behalf.  Permissions  You must have read access to the source object and write access to the destination bucket.    General purpose bucket permissions - You must have permissions in an IAM policy based on the source and destination bucket types in a CopyObject operation.   If the source object is in a general purpose bucket, you must have  s3:GetObject  permission to read the source object that is being copied.    If the destination bucket is a general purpose bucket, you must have  s3:PutObject  permission to write the object copy to the destination bucket.       Directory bucket permissions - You must have permissions in a bucket policy or an IAM identity-based policy based on the source and destination bucket types in a CopyObject operation.   If the source object that you want to copy is in a directory bucket, you must have the  s3express:CreateSession  permission in the Action element of a policy to read the object. By default, the session is in the ReadWrite mode. If you want to restrict the access, you can explicitly set the s3express:SessionMode condition key to ReadOnly on the copy source bucket.   If the copy destination is a directory bucket, you must have the  s3express:CreateSession  permission in the Action element of a policy to write the object to the destination. The s3express:SessionMode condition key can't be set to ReadOnly on the copy destination bucket.    If the object is encrypted with SSE-KMS, you must also have the kms:GenerateDataKey and kms:Decrypt permissions in IAM identity-based policies and KMS key policies for the KMS key. For example policies, see Example bucket policies for S3 Express One Zone and Amazon Web Services Identity and Access Management (IAM) identity-based policies for S3 Express One Zone in the Amazon S3 User Guide.    Response and special errors  When the request is an HTTP 1.1 request, the response is chunk encoded. When the request is not an HTTP 1.1 request, the response would not contain the Content-Length. You always need to read the entire response body to check if the copy succeeds.    If the copy is successful, you receive a response with information about the copied object.   A copy request might return an error when Amazon S3 receives the copy request or while Amazon S3 is copying the files. A 200 OK response can contain either a success or an error.   If the error occurs before the copy action starts, you receive a standard Amazon S3 error.   If the error occurs during the copy operation, the error response is embedded in the 200 OK response. For example, in a cross-region copy, you may encounter throttling and receive a 200 OK response. For more information, see Resolve the Error 200 response when copying objects to Amazon S3. The 200 OK status code means the copy was accepted, but it doesn't mean the copy is complete. Another example is when you disconnect from Amazon S3 before the copy is complete, Amazon S3 might cancel the copy and you may receive a 200 OK response. You must stay connected to Amazon S3 until the entire response is successfully received and processed. If you call this API operation directly, make sure to design your application to parse the content of the response and handle it appropriately. If you use Amazon Web Services SDKs, SDKs handle this condition. The SDKs detect the embedded error and apply error handling per your configuration settings (including automatically retrying the request as appropriate). If the condition persists, the SDKs throw an exception (or, for the SDKs that don't use exceptions, they return an error).      Charge  The copy request charge is based on the storage class and Region that you specify for the destination object. The request can also result in a data retrieval charge for the source if the source storage class bills for data retrieval. If the copy source is in a different region, the data transfer is billed to the copy source account. For pricing information, see Amazon S3 pricing.  HTTP Host header syntax   Directory buckets  - The HTTP Host header syntax is  Bucket_name.s3express-az_id.region.amazonaws.com.   The following operations are related to CopyObject:    PutObject     GetObject   
    */
   copyObject(params: S3.Types.CopyObjectRequest, callback?: (err: AWSError, data: S3.Types.CopyObjectOutput) => void): Request<S3.Types.CopyObjectOutput, AWSError>;
   /**
-   * Creates a copy of an object that is already stored in Amazon S3.  You can store individual objects of up to 5 TB in Amazon S3. You create a copy of your object up to 5 GB in size in a single atomic action using this API. However, to copy an object greater than 5 GB, you must use the multipart upload Upload Part - Copy (UploadPartCopy) API. For more information, see Copy Object Using the REST Multipart Upload API.  You can copy individual objects between general purpose buckets, between directory buckets, and between general purpose buckets and directory buckets.    Amazon S3 supports copy operations using Multi-Region Access Points only as a destination when using the Multi-Region Access Point ARN.     Directory buckets  - For directory buckets, you must make requests for this API operation to the Zonal endpoint. These endpoints support virtual-hosted-style requests in the format https://bucket_name.s3express-az_id.region.amazonaws.com/key-name . Path-style requests are not supported. For more information, see Regional and Zonal endpoints in the Amazon S3 User Guide.   VPC endpoints don't support cross-Region requests (including copies). If you're using VPC endpoints, your source and destination buckets should be in the same Amazon Web Services Region as your VPC endpoint.    Both the Region that you want to copy the object from and the Region that you want to copy the object to must be enabled for your account. For more information about how to enable a Region for your account, see Enable or disable a Region for standalone accounts in the Amazon Web Services Account Management Guide.  Amazon S3 transfer acceleration does not support cross-Region copies. If you request a cross-Region copy using a transfer acceleration endpoint, you get a 400 Bad Request error. For more information, see Transfer Acceleration.   Authentication and authorization  All CopyObject requests must be authenticated and signed by using IAM credentials (access key ID and secret access key for the IAM identities). All headers with the x-amz- prefix, including x-amz-copy-source, must be signed. For more information, see REST Authentication.  Directory buckets - You must use the IAM credentials to authenticate and authorize your access to the CopyObject API operation, instead of using the temporary security credentials through the CreateSession API operation. Amazon Web Services CLI or SDKs handles authentication and authorization on your behalf.  Permissions  You must have read access to the source object and write access to the destination bucket.    General purpose bucket permissions - You must have permissions in an IAM policy based on the source and destination bucket types in a CopyObject operation.   If the source object is in a general purpose bucket, you must have  s3:GetObject  permission to read the source object that is being copied.    If the destination bucket is a general purpose bucket, you must have  s3:PutObject  permission to write the object copy to the destination bucket.       Directory bucket permissions - You must have permissions in a bucket policy or an IAM identity-based policy based on the source and destination bucket types in a CopyObject operation.   If the source object that you want to copy is in a directory bucket, you must have the  s3express:CreateSession  permission in the Action element of a policy to read the object. By default, the session is in the ReadWrite mode. If you want to restrict the access, you can explicitly set the s3express:SessionMode condition key to ReadOnly on the copy source bucket.   If the copy destination is a directory bucket, you must have the  s3express:CreateSession  permission in the Action element of a policy to write the object to the destination. The s3express:SessionMode condition key can't be set to ReadOnly on the copy destination bucket.    For example policies, see Example bucket policies for S3 Express One Zone and Amazon Web Services Identity and Access Management (IAM) identity-based policies for S3 Express One Zone in the Amazon S3 User Guide.    Response and special errors  When the request is an HTTP 1.1 request, the response is chunk encoded. When the request is not an HTTP 1.1 request, the response would not contain the Content-Length. You always need to read the entire response body to check if the copy succeeds.    If the copy is successful, you receive a response with information about the copied object.   A copy request might return an error when Amazon S3 receives the copy request or while Amazon S3 is copying the files. A 200 OK response can contain either a success or an error.   If the error occurs before the copy action starts, you receive a standard Amazon S3 error.   If the error occurs during the copy operation, the error response is embedded in the 200 OK response. For example, in a cross-region copy, you may encounter throttling and receive a 200 OK response. For more information, see Resolve the Error 200 response when copying objects to Amazon S3. The 200 OK status code means the copy was accepted, but it doesn't mean the copy is complete. Another example is when you disconnect from Amazon S3 before the copy is complete, Amazon S3 might cancel the copy and you may receive a 200 OK response. You must stay connected to Amazon S3 until the entire response is successfully received and processed. If you call this API operation directly, make sure to design your application to parse the content of the response and handle it appropriately. If you use Amazon Web Services SDKs, SDKs handle this condition. The SDKs detect the embedded error and apply error handling per your configuration settings (including automatically retrying the request as appropriate). If the condition persists, the SDKs throw an exception (or, for the SDKs that don't use exceptions, they return an error).      Charge  The copy request charge is based on the storage class and Region that you specify for the destination object. The request can also result in a data retrieval charge for the source if the source storage class bills for data retrieval. If the copy source is in a different region, the data transfer is billed to the copy source account. For pricing information, see Amazon S3 pricing.  HTTP Host header syntax   Directory buckets  - The HTTP Host header syntax is  Bucket_name.s3express-az_id.region.amazonaws.com.   The following operations are related to CopyObject:    PutObject     GetObject   
+   * Creates a copy of an object that is already stored in Amazon S3.  You can store individual objects of up to 5 TB in Amazon S3. You create a copy of your object up to 5 GB in size in a single atomic action using this API. However, to copy an object greater than 5 GB, you must use the multipart upload Upload Part - Copy (UploadPartCopy) API. For more information, see Copy Object Using the REST Multipart Upload API.  You can copy individual objects between general purpose buckets, between directory buckets, and between general purpose buckets and directory buckets.    Amazon S3 supports copy operations using Multi-Region Access Points only as a destination when using the Multi-Region Access Point ARN.     Directory buckets  - For directory buckets, you must make requests for this API operation to the Zonal endpoint. These endpoints support virtual-hosted-style requests in the format https://bucket_name.s3express-az_id.region.amazonaws.com/key-name . Path-style requests are not supported. For more information, see Regional and Zonal endpoints in the Amazon S3 User Guide.   VPC endpoints don't support cross-Region requests (including copies). If you're using VPC endpoints, your source and destination buckets should be in the same Amazon Web Services Region as your VPC endpoint.    Both the Region that you want to copy the object from and the Region that you want to copy the object to must be enabled for your account. For more information about how to enable a Region for your account, see Enable or disable a Region for standalone accounts in the Amazon Web Services Account Management Guide.  Amazon S3 transfer acceleration does not support cross-Region copies. If you request a cross-Region copy using a transfer acceleration endpoint, you get a 400 Bad Request error. For more information, see Transfer Acceleration.   Authentication and authorization  All CopyObject requests must be authenticated and signed by using IAM credentials (access key ID and secret access key for the IAM identities). All headers with the x-amz- prefix, including x-amz-copy-source, must be signed. For more information, see REST Authentication.  Directory buckets - You must use the IAM credentials to authenticate and authorize your access to the CopyObject API operation, instead of using the temporary security credentials through the CreateSession API operation. Amazon Web Services CLI or SDKs handles authentication and authorization on your behalf.  Permissions  You must have read access to the source object and write access to the destination bucket.    General purpose bucket permissions - You must have permissions in an IAM policy based on the source and destination bucket types in a CopyObject operation.   If the source object is in a general purpose bucket, you must have  s3:GetObject  permission to read the source object that is being copied.    If the destination bucket is a general purpose bucket, you must have  s3:PutObject  permission to write the object copy to the destination bucket.       Directory bucket permissions - You must have permissions in a bucket policy or an IAM identity-based policy based on the source and destination bucket types in a CopyObject operation.   If the source object that you want to copy is in a directory bucket, you must have the  s3express:CreateSession  permission in the Action element of a policy to read the object. By default, the session is in the ReadWrite mode. If you want to restrict the access, you can explicitly set the s3express:SessionMode condition key to ReadOnly on the copy source bucket.   If the copy destination is a directory bucket, you must have the  s3express:CreateSession  permission in the Action element of a policy to write the object to the destination. The s3express:SessionMode condition key can't be set to ReadOnly on the copy destination bucket.    If the object is encrypted with SSE-KMS, you must also have the kms:GenerateDataKey and kms:Decrypt permissions in IAM identity-based policies and KMS key policies for the KMS key. For example policies, see Example bucket policies for S3 Express One Zone and Amazon Web Services Identity and Access Management (IAM) identity-based policies for S3 Express One Zone in the Amazon S3 User Guide.    Response and special errors  When the request is an HTTP 1.1 request, the response is chunk encoded. When the request is not an HTTP 1.1 request, the response would not contain the Content-Length. You always need to read the entire response body to check if the copy succeeds.    If the copy is successful, you receive a response with information about the copied object.   A copy request might return an error when Amazon S3 receives the copy request or while Amazon S3 is copying the files. A 200 OK response can contain either a success or an error.   If the error occurs before the copy action starts, you receive a standard Amazon S3 error.   If the error occurs during the copy operation, the error response is embedded in the 200 OK response. For example, in a cross-region copy, you may encounter throttling and receive a 200 OK response. For more information, see Resolve the Error 200 response when copying objects to Amazon S3. The 200 OK status code means the copy was accepted, but it doesn't mean the copy is complete. Another example is when you disconnect from Amazon S3 before the copy is complete, Amazon S3 might cancel the copy and you may receive a 200 OK response. You must stay connected to Amazon S3 until the entire response is successfully received and processed. If you call this API operation directly, make sure to design your application to parse the content of the response and handle it appropriately. If you use Amazon Web Services SDKs, SDKs handle this condition. The SDKs detect the embedded error and apply error handling per your configuration settings (including automatically retrying the request as appropriate). If the condition persists, the SDKs throw an exception (or, for the SDKs that don't use exceptions, they return an error).      Charge  The copy request charge is based on the storage class and Region that you specify for the destination object. The request can also result in a data retrieval charge for the source if the source storage class bills for data retrieval. If the copy source is in a different region, the data transfer is billed to the copy source account. For pricing information, see Amazon S3 pricing.  HTTP Host header syntax   Directory buckets  - The HTTP Host header syntax is  Bucket_name.s3express-az_id.region.amazonaws.com.   The following operations are related to CopyObject:    PutObject     GetObject   
    */
   copyObject(callback?: (err: AWSError, data: S3.Types.CopyObjectOutput) => void): Request<S3.Types.CopyObjectOutput, AWSError>;
   /**
@@ -50,19 +50,19 @@ declare class S3 extends S3Customizations {
    */
   createBucket(callback?: (err: AWSError, data: S3.Types.CreateBucketOutput) => void): Request<S3.Types.CreateBucketOutput, AWSError>;
   /**
-   * This action initiates a multipart upload and returns an upload ID. This upload ID is used to associate all of the parts in the specific multipart upload. You specify this upload ID in each of your subsequent upload part requests (see UploadPart). You also include this upload ID in the final request to either complete or abort the multipart upload request. For more information about multipart uploads, see Multipart Upload Overview in the Amazon S3 User Guide.  After you initiate a multipart upload and upload one or more parts, to stop being charged for storing the uploaded parts, you must either complete or abort the multipart upload. Amazon S3 frees up the space used to store the parts and stops charging you for storing them only after you either complete or abort a multipart upload.   If you have configured a lifecycle rule to abort incomplete multipart uploads, the created multipart upload must be completed within the number of days specified in the bucket lifecycle configuration. Otherwise, the incomplete multipart upload becomes eligible for an abort action and Amazon S3 aborts the multipart upload. For more information, see Aborting Incomplete Multipart Uploads Using a Bucket Lifecycle Configuration.     Directory buckets  - S3 Lifecycle is not supported by directory buckets.    Directory buckets  - For directory buckets, you must make requests for this API operation to the Zonal endpoint. These endpoints support virtual-hosted-style requests in the format https://bucket_name.s3express-az_id.region.amazonaws.com/key-name . Path-style requests are not supported. For more information, see Regional and Zonal endpoints in the Amazon S3 User Guide.     Request signing  For request signing, multipart upload is just a series of regular requests. You initiate a multipart upload, send one or more requests to upload parts, and then complete the multipart upload process. You sign each request individually. There is nothing special about signing multipart upload requests. For more information about signing, see Authenticating Requests (Amazon Web Services Signature Version 4) in the Amazon S3 User Guide.  Permissions     General purpose bucket permissions - To perform a multipart upload with encryption using an Key Management Service (KMS) KMS key, the requester must have permission to the kms:Decrypt and kms:GenerateDataKey actions on the key. The requester must also have permissions for the kms:GenerateDataKey action for the CreateMultipartUpload API. Then, the requester needs permissions for the kms:Decrypt action on the UploadPart and UploadPartCopy APIs. These permissions are required because Amazon S3 must decrypt and read data from the encrypted file parts before it completes the multipart upload. For more information, see Multipart upload API and permissions and Protecting data using server-side encryption with Amazon Web Services KMS in the Amazon S3 User Guide.    Directory bucket permissions - To grant access to this API operation on a directory bucket, we recommend that you use the  CreateSession  API operation for session-based authorization. Specifically, you grant the s3express:CreateSession permission to the directory bucket in a bucket policy or an IAM identity-based policy. Then, you make the CreateSession API call on the bucket to obtain a session token. With the session token in your request header, you can make API requests to this operation. After the session token expires, you make another CreateSession API call to generate a new session token for use. Amazon Web Services CLI or SDKs create session and refresh the session token automatically to avoid service interruptions when a session expires. For more information about authorization, see  CreateSession .    Encryption     General purpose buckets - Server-side encryption is for data encryption at rest. Amazon S3 encrypts your data as it writes it to disks in its data centers and decrypts it when you access it. Amazon S3 automatically encrypts all new objects that are uploaded to an S3 bucket. When doing a multipart upload, if you don't specify encryption information in your request, the encryption setting of the uploaded parts is set to the default encryption configuration of the destination bucket. By default, all buckets have a base level of encryption configuration that uses server-side encryption with Amazon S3 managed keys (SSE-S3). If the destination bucket has a default encryption configuration that uses server-side encryption with an Key Management Service (KMS) key (SSE-KMS), or a customer-provided encryption key (SSE-C), Amazon S3 uses the corresponding KMS key, or a customer-provided key to encrypt the uploaded parts. When you perform a CreateMultipartUpload operation, if you want to use a different type of encryption setting for the uploaded parts, you can request that Amazon S3 encrypts the object with a different encryption key (such as an Amazon S3 managed key, a KMS key, or a customer-provided key). When the encryption setting in your request is different from the default encryption configuration of the destination bucket, the encryption setting in your request takes precedence. If you choose to provide your own encryption key, the request headers you provide in UploadPart and UploadPartCopy requests must match the headers you used in the CreateMultipartUpload request.   Use KMS keys (SSE-KMS) that include the Amazon Web Services managed key (aws/s3) and KMS customer managed keys stored in Key Management Service (KMS) – If you want Amazon Web Services to manage the keys used to encrypt data, specify the following headers in the request.    x-amz-server-side-encryption     x-amz-server-side-encryption-aws-kms-key-id     x-amz-server-side-encryption-context       If you specify x-amz-server-side-encryption:aws:kms, but don't provide x-amz-server-side-encryption-aws-kms-key-id, Amazon S3 uses the Amazon Web Services managed key (aws/s3 key) in KMS to protect the data.   To perform a multipart upload with encryption by using an Amazon Web Services KMS key, the requester must have permission to the kms:Decrypt and kms:GenerateDataKey* actions on the key. These permissions are required because Amazon S3 must decrypt and read data from the encrypted file parts before it completes the multipart upload. For more information, see Multipart upload API and permissions and Protecting data using server-side encryption with Amazon Web Services KMS in the Amazon S3 User Guide.   If your Identity and Access Management (IAM) user or role is in the same Amazon Web Services account as the KMS key, then you must have these permissions on the key policy. If your IAM user or role is in a different account from the key, then you must have the permissions on both the key policy and your IAM user or role.   All GET and PUT requests for an object protected by KMS fail if you don't make them by using Secure Sockets Layer (SSL), Transport Layer Security (TLS), or Signature Version 4. For information about configuring any of the officially supported Amazon Web Services SDKs and Amazon Web Services CLI, see Specifying the Signature Version in Request Authentication in the Amazon S3 User Guide.    For more information about server-side encryption with KMS keys (SSE-KMS), see Protecting Data Using Server-Side Encryption with KMS keys in the Amazon S3 User Guide.   Use customer-provided encryption keys (SSE-C) – If you want to manage your own encryption keys, provide all the following headers in the request.    x-amz-server-side-encryption-customer-algorithm     x-amz-server-side-encryption-customer-key     x-amz-server-side-encryption-customer-key-MD5    For more information about server-side encryption with customer-provided encryption keys (SSE-C), see  Protecting data using server-side encryption with customer-provided encryption keys (SSE-C) in the Amazon S3 User Guide.      Directory buckets -For directory buckets, only server-side encryption with Amazon S3 managed keys (SSE-S3) (AES256) is supported.    HTTP Host header syntax   Directory buckets  - The HTTP Host header syntax is  Bucket_name.s3express-az_id.region.amazonaws.com.   The following operations are related to CreateMultipartUpload:    UploadPart     CompleteMultipartUpload     AbortMultipartUpload     ListParts     ListMultipartUploads   
+   * This action initiates a multipart upload and returns an upload ID. This upload ID is used to associate all of the parts in the specific multipart upload. You specify this upload ID in each of your subsequent upload part requests (see UploadPart). You also include this upload ID in the final request to either complete or abort the multipart upload request. For more information about multipart uploads, see Multipart Upload Overview in the Amazon S3 User Guide.  After you initiate a multipart upload and upload one or more parts, to stop being charged for storing the uploaded parts, you must either complete or abort the multipart upload. Amazon S3 frees up the space used to store the parts and stops charging you for storing them only after you either complete or abort a multipart upload.   If you have configured a lifecycle rule to abort incomplete multipart uploads, the created multipart upload must be completed within the number of days specified in the bucket lifecycle configuration. Otherwise, the incomplete multipart upload becomes eligible for an abort action and Amazon S3 aborts the multipart upload. For more information, see Aborting Incomplete Multipart Uploads Using a Bucket Lifecycle Configuration.     Directory buckets  - S3 Lifecycle is not supported by directory buckets.    Directory buckets  - For directory buckets, you must make requests for this API operation to the Zonal endpoint. These endpoints support virtual-hosted-style requests in the format https://bucket_name.s3express-az_id.region.amazonaws.com/key-name . Path-style requests are not supported. For more information, see Regional and Zonal endpoints in the Amazon S3 User Guide.     Request signing  For request signing, multipart upload is just a series of regular requests. You initiate a multipart upload, send one or more requests to upload parts, and then complete the multipart upload process. You sign each request individually. There is nothing special about signing multipart upload requests. For more information about signing, see Authenticating Requests (Amazon Web Services Signature Version 4) in the Amazon S3 User Guide.  Permissions     General purpose bucket permissions - To perform a multipart upload with encryption using an Key Management Service (KMS) KMS key, the requester must have permission to the kms:Decrypt and kms:GenerateDataKey actions on the key. The requester must also have permissions for the kms:GenerateDataKey action for the CreateMultipartUpload API. Then, the requester needs permissions for the kms:Decrypt action on the UploadPart and UploadPartCopy APIs. These permissions are required because Amazon S3 must decrypt and read data from the encrypted file parts before it completes the multipart upload. For more information, see Multipart upload API and permissions and Protecting data using server-side encryption with Amazon Web Services KMS in the Amazon S3 User Guide.    Directory bucket permissions - To grant access to this API operation on a directory bucket, we recommend that you use the  CreateSession  API operation for session-based authorization. Specifically, you grant the s3express:CreateSession permission to the directory bucket in a bucket policy or an IAM identity-based policy. Then, you make the CreateSession API call on the bucket to obtain a session token. With the session token in your request header, you can make API requests to this operation. After the session token expires, you make another CreateSession API call to generate a new session token for use. Amazon Web Services CLI or SDKs create session and refresh the session token automatically to avoid service interruptions when a session expires. For more information about authorization, see  CreateSession .    Encryption     General purpose buckets - Server-side encryption is for data encryption at rest. Amazon S3 encrypts your data as it writes it to disks in its data centers and decrypts it when you access it. Amazon S3 automatically encrypts all new objects that are uploaded to an S3 bucket. When doing a multipart upload, if you don't specify encryption information in your request, the encryption setting of the uploaded parts is set to the default encryption configuration of the destination bucket. By default, all buckets have a base level of encryption configuration that uses server-side encryption with Amazon S3 managed keys (SSE-S3). If the destination bucket has a default encryption configuration that uses server-side encryption with an Key Management Service (KMS) key (SSE-KMS), or a customer-provided encryption key (SSE-C), Amazon S3 uses the corresponding KMS key, or a customer-provided key to encrypt the uploaded parts. When you perform a CreateMultipartUpload operation, if you want to use a different type of encryption setting for the uploaded parts, you can request that Amazon S3 encrypts the object with a different encryption key (such as an Amazon S3 managed key, a KMS key, or a customer-provided key). When the encryption setting in your request is different from the default encryption configuration of the destination bucket, the encryption setting in your request takes precedence. If you choose to provide your own encryption key, the request headers you provide in UploadPart and UploadPartCopy requests must match the headers you used in the CreateMultipartUpload request.   Use KMS keys (SSE-KMS) that include the Amazon Web Services managed key (aws/s3) and KMS customer managed keys stored in Key Management Service (KMS) – If you want Amazon Web Services to manage the keys used to encrypt data, specify the following headers in the request.    x-amz-server-side-encryption     x-amz-server-side-encryption-aws-kms-key-id     x-amz-server-side-encryption-context       If you specify x-amz-server-side-encryption:aws:kms, but don't provide x-amz-server-side-encryption-aws-kms-key-id, Amazon S3 uses the Amazon Web Services managed key (aws/s3 key) in KMS to protect the data.   To perform a multipart upload with encryption by using an Amazon Web Services KMS key, the requester must have permission to the kms:Decrypt and kms:GenerateDataKey* actions on the key. These permissions are required because Amazon S3 must decrypt and read data from the encrypted file parts before it completes the multipart upload. For more information, see Multipart upload API and permissions and Protecting data using server-side encryption with Amazon Web Services KMS in the Amazon S3 User Guide.   If your Identity and Access Management (IAM) user or role is in the same Amazon Web Services account as the KMS key, then you must have these permissions on the key policy. If your IAM user or role is in a different account from the key, then you must have the permissions on both the key policy and your IAM user or role.   All GET and PUT requests for an object protected by KMS fail if you don't make them by using Secure Sockets Layer (SSL), Transport Layer Security (TLS), or Signature Version 4. For information about configuring any of the officially supported Amazon Web Services SDKs and Amazon Web Services CLI, see Specifying the Signature Version in Request Authentication in the Amazon S3 User Guide.    For more information about server-side encryption with KMS keys (SSE-KMS), see Protecting Data Using Server-Side Encryption with KMS keys in the Amazon S3 User Guide.   Use customer-provided encryption keys (SSE-C) – If you want to manage your own encryption keys, provide all the following headers in the request.    x-amz-server-side-encryption-customer-algorithm     x-amz-server-side-encryption-customer-key     x-amz-server-side-encryption-customer-key-MD5    For more information about server-side encryption with customer-provided encryption keys (SSE-C), see  Protecting data using server-side encryption with customer-provided encryption keys (SSE-C) in the Amazon S3 User Guide.      Directory buckets - For directory buckets, there are only two supported options for server-side encryption: server-side encryption with Amazon S3 managed keys (SSE-S3) (AES256) and server-side encryption with KMS keys (SSE-KMS) (aws:kms). We recommend that the bucket's default encryption uses the desired encryption configuration and you don't override the bucket default encryption in your CreateSession requests or PUT object requests. Then, new objects are automatically encrypted with the desired encryption settings. For more information, see Protecting data with server-side encryption in the Amazon S3 User Guide. For more information about the encryption overriding behaviors in directory buckets, see Specifying server-side encryption with KMS for new object uploads. In the Zonal endpoint API calls (except CopyObject and UploadPartCopy) using the REST API, the encryption request headers must match the encryption settings that are specified in the CreateSession request. You can't override the values of the encryption settings (x-amz-server-side-encryption, x-amz-server-side-encryption-aws-kms-key-id, x-amz-server-side-encryption-context, and x-amz-server-side-encryption-bucket-key-enabled) that are specified in the CreateSession request. You don't need to explicitly specify these encryption settings values in Zonal endpoint API calls, and Amazon S3 will use the encryption settings values from the CreateSession request to protect new objects in the directory bucket.   When you use the CLI or the Amazon Web Services SDKs, for CreateSession, the session token refreshes automatically to avoid service interruptions when a session expires. The CLI or the Amazon Web Services SDKs use the bucket's default encryption configuration for the CreateSession request. It's not supported to override the encryption settings values in the CreateSession request. So in the Zonal endpoint API calls (except CopyObject and UploadPartCopy), the encryption request headers must match the default encryption configuration of the directory bucket.    For directory buckets, when you perform a CreateMultipartUpload operation and an UploadPartCopy operation, the request headers you provide in the CreateMultipartUpload request must match the default encryption configuration of the destination bucket.      HTTP Host header syntax   Directory buckets  - The HTTP Host header syntax is  Bucket_name.s3express-az_id.region.amazonaws.com.   The following operations are related to CreateMultipartUpload:    UploadPart     CompleteMultipartUpload     AbortMultipartUpload     ListParts     ListMultipartUploads   
    */
   createMultipartUpload(params: S3.Types.CreateMultipartUploadRequest, callback?: (err: AWSError, data: S3.Types.CreateMultipartUploadOutput) => void): Request<S3.Types.CreateMultipartUploadOutput, AWSError>;
   /**
-   * This action initiates a multipart upload and returns an upload ID. This upload ID is used to associate all of the parts in the specific multipart upload. You specify this upload ID in each of your subsequent upload part requests (see UploadPart). You also include this upload ID in the final request to either complete or abort the multipart upload request. For more information about multipart uploads, see Multipart Upload Overview in the Amazon S3 User Guide.  After you initiate a multipart upload and upload one or more parts, to stop being charged for storing the uploaded parts, you must either complete or abort the multipart upload. Amazon S3 frees up the space used to store the parts and stops charging you for storing them only after you either complete or abort a multipart upload.   If you have configured a lifecycle rule to abort incomplete multipart uploads, the created multipart upload must be completed within the number of days specified in the bucket lifecycle configuration. Otherwise, the incomplete multipart upload becomes eligible for an abort action and Amazon S3 aborts the multipart upload. For more information, see Aborting Incomplete Multipart Uploads Using a Bucket Lifecycle Configuration.     Directory buckets  - S3 Lifecycle is not supported by directory buckets.    Directory buckets  - For directory buckets, you must make requests for this API operation to the Zonal endpoint. These endpoints support virtual-hosted-style requests in the format https://bucket_name.s3express-az_id.region.amazonaws.com/key-name . Path-style requests are not supported. For more information, see Regional and Zonal endpoints in the Amazon S3 User Guide.     Request signing  For request signing, multipart upload is just a series of regular requests. You initiate a multipart upload, send one or more requests to upload parts, and then complete the multipart upload process. You sign each request individually. There is nothing special about signing multipart upload requests. For more information about signing, see Authenticating Requests (Amazon Web Services Signature Version 4) in the Amazon S3 User Guide.  Permissions     General purpose bucket permissions - To perform a multipart upload with encryption using an Key Management Service (KMS) KMS key, the requester must have permission to the kms:Decrypt and kms:GenerateDataKey actions on the key. The requester must also have permissions for the kms:GenerateDataKey action for the CreateMultipartUpload API. Then, the requester needs permissions for the kms:Decrypt action on the UploadPart and UploadPartCopy APIs. These permissions are required because Amazon S3 must decrypt and read data from the encrypted file parts before it completes the multipart upload. For more information, see Multipart upload API and permissions and Protecting data using server-side encryption with Amazon Web Services KMS in the Amazon S3 User Guide.    Directory bucket permissions - To grant access to this API operation on a directory bucket, we recommend that you use the  CreateSession  API operation for session-based authorization. Specifically, you grant the s3express:CreateSession permission to the directory bucket in a bucket policy or an IAM identity-based policy. Then, you make the CreateSession API call on the bucket to obtain a session token. With the session token in your request header, you can make API requests to this operation. After the session token expires, you make another CreateSession API call to generate a new session token for use. Amazon Web Services CLI or SDKs create session and refresh the session token automatically to avoid service interruptions when a session expires. For more information about authorization, see  CreateSession .    Encryption     General purpose buckets - Server-side encryption is for data encryption at rest. Amazon S3 encrypts your data as it writes it to disks in its data centers and decrypts it when you access it. Amazon S3 automatically encrypts all new objects that are uploaded to an S3 bucket. When doing a multipart upload, if you don't specify encryption information in your request, the encryption setting of the uploaded parts is set to the default encryption configuration of the destination bucket. By default, all buckets have a base level of encryption configuration that uses server-side encryption with Amazon S3 managed keys (SSE-S3). If the destination bucket has a default encryption configuration that uses server-side encryption with an Key Management Service (KMS) key (SSE-KMS), or a customer-provided encryption key (SSE-C), Amazon S3 uses the corresponding KMS key, or a customer-provided key to encrypt the uploaded parts. When you perform a CreateMultipartUpload operation, if you want to use a different type of encryption setting for the uploaded parts, you can request that Amazon S3 encrypts the object with a different encryption key (such as an Amazon S3 managed key, a KMS key, or a customer-provided key). When the encryption setting in your request is different from the default encryption configuration of the destination bucket, the encryption setting in your request takes precedence. If you choose to provide your own encryption key, the request headers you provide in UploadPart and UploadPartCopy requests must match the headers you used in the CreateMultipartUpload request.   Use KMS keys (SSE-KMS) that include the Amazon Web Services managed key (aws/s3) and KMS customer managed keys stored in Key Management Service (KMS) – If you want Amazon Web Services to manage the keys used to encrypt data, specify the following headers in the request.    x-amz-server-side-encryption     x-amz-server-side-encryption-aws-kms-key-id     x-amz-server-side-encryption-context       If you specify x-amz-server-side-encryption:aws:kms, but don't provide x-amz-server-side-encryption-aws-kms-key-id, Amazon S3 uses the Amazon Web Services managed key (aws/s3 key) in KMS to protect the data.   To perform a multipart upload with encryption by using an Amazon Web Services KMS key, the requester must have permission to the kms:Decrypt and kms:GenerateDataKey* actions on the key. These permissions are required because Amazon S3 must decrypt and read data from the encrypted file parts before it completes the multipart upload. For more information, see Multipart upload API and permissions and Protecting data using server-side encryption with Amazon Web Services KMS in the Amazon S3 User Guide.   If your Identity and Access Management (IAM) user or role is in the same Amazon Web Services account as the KMS key, then you must have these permissions on the key policy. If your IAM user or role is in a different account from the key, then you must have the permissions on both the key policy and your IAM user or role.   All GET and PUT requests for an object protected by KMS fail if you don't make them by using Secure Sockets Layer (SSL), Transport Layer Security (TLS), or Signature Version 4. For information about configuring any of the officially supported Amazon Web Services SDKs and Amazon Web Services CLI, see Specifying the Signature Version in Request Authentication in the Amazon S3 User Guide.    For more information about server-side encryption with KMS keys (SSE-KMS), see Protecting Data Using Server-Side Encryption with KMS keys in the Amazon S3 User Guide.   Use customer-provided encryption keys (SSE-C) – If you want to manage your own encryption keys, provide all the following headers in the request.    x-amz-server-side-encryption-customer-algorithm     x-amz-server-side-encryption-customer-key     x-amz-server-side-encryption-customer-key-MD5    For more information about server-side encryption with customer-provided encryption keys (SSE-C), see  Protecting data using server-side encryption with customer-provided encryption keys (SSE-C) in the Amazon S3 User Guide.      Directory buckets -For directory buckets, only server-side encryption with Amazon S3 managed keys (SSE-S3) (AES256) is supported.    HTTP Host header syntax   Directory buckets  - The HTTP Host header syntax is  Bucket_name.s3express-az_id.region.amazonaws.com.   The following operations are related to CreateMultipartUpload:    UploadPart     CompleteMultipartUpload     AbortMultipartUpload     ListParts     ListMultipartUploads   
+   * This action initiates a multipart upload and returns an upload ID. This upload ID is used to associate all of the parts in the specific multipart upload. You specify this upload ID in each of your subsequent upload part requests (see UploadPart). You also include this upload ID in the final request to either complete or abort the multipart upload request. For more information about multipart uploads, see Multipart Upload Overview in the Amazon S3 User Guide.  After you initiate a multipart upload and upload one or more parts, to stop being charged for storing the uploaded parts, you must either complete or abort the multipart upload. Amazon S3 frees up the space used to store the parts and stops charging you for storing them only after you either complete or abort a multipart upload.   If you have configured a lifecycle rule to abort incomplete multipart uploads, the created multipart upload must be completed within the number of days specified in the bucket lifecycle configuration. Otherwise, the incomplete multipart upload becomes eligible for an abort action and Amazon S3 aborts the multipart upload. For more information, see Aborting Incomplete Multipart Uploads Using a Bucket Lifecycle Configuration.     Directory buckets  - S3 Lifecycle is not supported by directory buckets.    Directory buckets  - For directory buckets, you must make requests for this API operation to the Zonal endpoint. These endpoints support virtual-hosted-style requests in the format https://bucket_name.s3express-az_id.region.amazonaws.com/key-name . Path-style requests are not supported. For more information, see Regional and Zonal endpoints in the Amazon S3 User Guide.     Request signing  For request signing, multipart upload is just a series of regular requests. You initiate a multipart upload, send one or more requests to upload parts, and then complete the multipart upload process. You sign each request individually. There is nothing special about signing multipart upload requests. For more information about signing, see Authenticating Requests (Amazon Web Services Signature Version 4) in the Amazon S3 User Guide.  Permissions     General purpose bucket permissions - To perform a multipart upload with encryption using an Key Management Service (KMS) KMS key, the requester must have permission to the kms:Decrypt and kms:GenerateDataKey actions on the key. The requester must also have permissions for the kms:GenerateDataKey action for the CreateMultipartUpload API. Then, the requester needs permissions for the kms:Decrypt action on the UploadPart and UploadPartCopy APIs. These permissions are required because Amazon S3 must decrypt and read data from the encrypted file parts before it completes the multipart upload. For more information, see Multipart upload API and permissions and Protecting data using server-side encryption with Amazon Web Services KMS in the Amazon S3 User Guide.    Directory bucket permissions - To grant access to this API operation on a directory bucket, we recommend that you use the  CreateSession  API operation for session-based authorization. Specifically, you grant the s3express:CreateSession permission to the directory bucket in a bucket policy or an IAM identity-based policy. Then, you make the CreateSession API call on the bucket to obtain a session token. With the session token in your request header, you can make API requests to this operation. After the session token expires, you make another CreateSession API call to generate a new session token for use. Amazon Web Services CLI or SDKs create session and refresh the session token automatically to avoid service interruptions when a session expires. For more information about authorization, see  CreateSession .    Encryption     General purpose buckets - Server-side encryption is for data encryption at rest. Amazon S3 encrypts your data as it writes it to disks in its data centers and decrypts it when you access it. Amazon S3 automatically encrypts all new objects that are uploaded to an S3 bucket. When doing a multipart upload, if you don't specify encryption information in your request, the encryption setting of the uploaded parts is set to the default encryption configuration of the destination bucket. By default, all buckets have a base level of encryption configuration that uses server-side encryption with Amazon S3 managed keys (SSE-S3). If the destination bucket has a default encryption configuration that uses server-side encryption with an Key Management Service (KMS) key (SSE-KMS), or a customer-provided encryption key (SSE-C), Amazon S3 uses the corresponding KMS key, or a customer-provided key to encrypt the uploaded parts. When you perform a CreateMultipartUpload operation, if you want to use a different type of encryption setting for the uploaded parts, you can request that Amazon S3 encrypts the object with a different encryption key (such as an Amazon S3 managed key, a KMS key, or a customer-provided key). When the encryption setting in your request is different from the default encryption configuration of the destination bucket, the encryption setting in your request takes precedence. If you choose to provide your own encryption key, the request headers you provide in UploadPart and UploadPartCopy requests must match the headers you used in the CreateMultipartUpload request.   Use KMS keys (SSE-KMS) that include the Amazon Web Services managed key (aws/s3) and KMS customer managed keys stored in Key Management Service (KMS) – If you want Amazon Web Services to manage the keys used to encrypt data, specify the following headers in the request.    x-amz-server-side-encryption     x-amz-server-side-encryption-aws-kms-key-id     x-amz-server-side-encryption-context       If you specify x-amz-server-side-encryption:aws:kms, but don't provide x-amz-server-side-encryption-aws-kms-key-id, Amazon S3 uses the Amazon Web Services managed key (aws/s3 key) in KMS to protect the data.   To perform a multipart upload with encryption by using an Amazon Web Services KMS key, the requester must have permission to the kms:Decrypt and kms:GenerateDataKey* actions on the key. These permissions are required because Amazon S3 must decrypt and read data from the encrypted file parts before it completes the multipart upload. For more information, see Multipart upload API and permissions and Protecting data using server-side encryption with Amazon Web Services KMS in the Amazon S3 User Guide.   If your Identity and Access Management (IAM) user or role is in the same Amazon Web Services account as the KMS key, then you must have these permissions on the key policy. If your IAM user or role is in a different account from the key, then you must have the permissions on both the key policy and your IAM user or role.   All GET and PUT requests for an object protected by KMS fail if you don't make them by using Secure Sockets Layer (SSL), Transport Layer Security (TLS), or Signature Version 4. For information about configuring any of the officially supported Amazon Web Services SDKs and Amazon Web Services CLI, see Specifying the Signature Version in Request Authentication in the Amazon S3 User Guide.    For more information about server-side encryption with KMS keys (SSE-KMS), see Protecting Data Using Server-Side Encryption with KMS keys in the Amazon S3 User Guide.   Use customer-provided encryption keys (SSE-C) – If you want to manage your own encryption keys, provide all the following headers in the request.    x-amz-server-side-encryption-customer-algorithm     x-amz-server-side-encryption-customer-key     x-amz-server-side-encryption-customer-key-MD5    For more information about server-side encryption with customer-provided encryption keys (SSE-C), see  Protecting data using server-side encryption with customer-provided encryption keys (SSE-C) in the Amazon S3 User Guide.      Directory buckets - For directory buckets, there are only two supported options for server-side encryption: server-side encryption with Amazon S3 managed keys (SSE-S3) (AES256) and server-side encryption with KMS keys (SSE-KMS) (aws:kms). We recommend that the bucket's default encryption uses the desired encryption configuration and you don't override the bucket default encryption in your CreateSession requests or PUT object requests. Then, new objects are automatically encrypted with the desired encryption settings. For more information, see Protecting data with server-side encryption in the Amazon S3 User Guide. For more information about the encryption overriding behaviors in directory buckets, see Specifying server-side encryption with KMS for new object uploads. In the Zonal endpoint API calls (except CopyObject and UploadPartCopy) using the REST API, the encryption request headers must match the encryption settings that are specified in the CreateSession request. You can't override the values of the encryption settings (x-amz-server-side-encryption, x-amz-server-side-encryption-aws-kms-key-id, x-amz-server-side-encryption-context, and x-amz-server-side-encryption-bucket-key-enabled) that are specified in the CreateSession request. You don't need to explicitly specify these encryption settings values in Zonal endpoint API calls, and Amazon S3 will use the encryption settings values from the CreateSession request to protect new objects in the directory bucket.   When you use the CLI or the Amazon Web Services SDKs, for CreateSession, the session token refreshes automatically to avoid service interruptions when a session expires. The CLI or the Amazon Web Services SDKs use the bucket's default encryption configuration for the CreateSession request. It's not supported to override the encryption settings values in the CreateSession request. So in the Zonal endpoint API calls (except CopyObject and UploadPartCopy), the encryption request headers must match the default encryption configuration of the directory bucket.    For directory buckets, when you perform a CreateMultipartUpload operation and an UploadPartCopy operation, the request headers you provide in the CreateMultipartUpload request must match the default encryption configuration of the destination bucket.      HTTP Host header syntax   Directory buckets  - The HTTP Host header syntax is  Bucket_name.s3express-az_id.region.amazonaws.com.   The following operations are related to CreateMultipartUpload:    UploadPart     CompleteMultipartUpload     AbortMultipartUpload     ListParts     ListMultipartUploads   
    */
   createMultipartUpload(callback?: (err: AWSError, data: S3.Types.CreateMultipartUploadOutput) => void): Request<S3.Types.CreateMultipartUploadOutput, AWSError>;
   /**
-   * Creates a session that establishes temporary security credentials to support fast authentication and authorization for the Zonal endpoint APIs on directory buckets. For more information about Zonal endpoint APIs that include the Availability Zone in the request endpoint, see S3 Express One Zone APIs in the Amazon S3 User Guide.  To make Zonal endpoint API requests on a directory bucket, use the CreateSession API operation. Specifically, you grant s3express:CreateSession permission to a bucket in a bucket policy or an IAM identity-based policy. Then, you use IAM credentials to make the CreateSession API request on the bucket, which returns temporary security credentials that include the access key ID, secret access key, session token, and expiration. These credentials have associated permissions to access the Zonal endpoint APIs. After the session is created, you don’t need to use other policies to grant permissions to each Zonal endpoint API individually. Instead, in your Zonal endpoint API requests, you sign your requests by applying the temporary security credentials of the session to the request headers and following the SigV4 protocol for authentication. You also apply the session token to the x-amz-s3session-token request header for authorization. Temporary security credentials are scoped to the bucket and expire after 5 minutes. After the expiration time, any calls that you make with those credentials will fail. You must use IAM credentials again to make a CreateSession API request that generates a new set of temporary credentials for use. Temporary credentials cannot be extended or refreshed beyond the original specified interval. If you use Amazon Web Services SDKs, SDKs handle the session token refreshes automatically to avoid service interruptions when a session expires. We recommend that you use the Amazon Web Services SDKs to initiate and manage requests to the CreateSession API. For more information, see Performance guidelines and design patterns in the Amazon S3 User Guide.    You must make requests for this API operation to the Zonal endpoint. These endpoints support virtual-hosted-style requests in the format https://bucket_name.s3express-az_id.region.amazonaws.com. Path-style requests are not supported. For more information, see Regional and Zonal endpoints in the Amazon S3 User Guide.     CopyObject API operation - Unlike other Zonal endpoint APIs, the CopyObject API operation doesn't use the temporary security credentials returned from the CreateSession API operation for authentication and authorization. For information about authentication and authorization of the CopyObject API operation on directory buckets, see CopyObject.     HeadBucket API operation - Unlike other Zonal endpoint APIs, the HeadBucket API operation doesn't use the temporary security credentials returned from the CreateSession API operation for authentication and authorization. For information about authentication and authorization of the HeadBucket API operation on directory buckets, see HeadBucket.     Permissions  To obtain temporary security credentials, you must create a bucket policy or an IAM identity-based policy that grants s3express:CreateSession permission to the bucket. In a policy, you can have the s3express:SessionMode condition key to control who can create a ReadWrite or ReadOnly session. For more information about ReadWrite or ReadOnly sessions, see  x-amz-create-session-mode . For example policies, see Example bucket policies for S3 Express One Zone and Amazon Web Services Identity and Access Management (IAM) identity-based policies for S3 Express One Zone in the Amazon S3 User Guide.  To grant cross-account access to Zonal endpoint APIs, the bucket policy should also grant both accounts the s3express:CreateSession permission.  HTTP Host header syntax   Directory buckets  - The HTTP Host header syntax is  Bucket_name.s3express-az_id.region.amazonaws.com.  
+   * Creates a session that establishes temporary security credentials to support fast authentication and authorization for the Zonal endpoint API operations on directory buckets. For more information about Zonal endpoint API operations that include the Availability Zone in the request endpoint, see S3 Express One Zone APIs in the Amazon S3 User Guide.  To make Zonal endpoint API requests on a directory bucket, use the CreateSession API operation. Specifically, you grant s3express:CreateSession permission to a bucket in a bucket policy or an IAM identity-based policy. Then, you use IAM credentials to make the CreateSession API request on the bucket, which returns temporary security credentials that include the access key ID, secret access key, session token, and expiration. These credentials have associated permissions to access the Zonal endpoint API operations. After the session is created, you don’t need to use other policies to grant permissions to each Zonal endpoint API individually. Instead, in your Zonal endpoint API requests, you sign your requests by applying the temporary security credentials of the session to the request headers and following the SigV4 protocol for authentication. You also apply the session token to the x-amz-s3session-token request header for authorization. Temporary security credentials are scoped to the bucket and expire after 5 minutes. After the expiration time, any calls that you make with those credentials will fail. You must use IAM credentials again to make a CreateSession API request that generates a new set of temporary credentials for use. Temporary credentials cannot be extended or refreshed beyond the original specified interval. If you use Amazon Web Services SDKs, SDKs handle the session token refreshes automatically to avoid service interruptions when a session expires. We recommend that you use the Amazon Web Services SDKs to initiate and manage requests to the CreateSession API. For more information, see Performance guidelines and design patterns in the Amazon S3 User Guide.    You must make requests for this API operation to the Zonal endpoint. These endpoints support virtual-hosted-style requests in the format https://bucket_name.s3express-az_id.region.amazonaws.com. Path-style requests are not supported. For more information, see Regional and Zonal endpoints in the Amazon S3 User Guide.     CopyObject API operation - Unlike other Zonal endpoint API operations, the CopyObject API operation doesn't use the temporary security credentials returned from the CreateSession API operation for authentication and authorization. For information about authentication and authorization of the CopyObject API operation on directory buckets, see CopyObject.     HeadBucket API operation - Unlike other Zonal endpoint API operations, the HeadBucket API operation doesn't use the temporary security credentials returned from the CreateSession API operation for authentication and authorization. For information about authentication and authorization of the HeadBucket API operation on directory buckets, see HeadBucket.     Permissions  To obtain temporary security credentials, you must create a bucket policy or an IAM identity-based policy that grants s3express:CreateSession permission to the bucket. In a policy, you can have the s3express:SessionMode condition key to control who can create a ReadWrite or ReadOnly session. For more information about ReadWrite or ReadOnly sessions, see  x-amz-create-session-mode . For example policies, see Example bucket policies for S3 Express One Zone and Amazon Web Services Identity and Access Management (IAM) identity-based policies for S3 Express One Zone in the Amazon S3 User Guide.  To grant cross-account access to Zonal endpoint API operations, the bucket policy should also grant both accounts the s3express:CreateSession permission. If you want to encrypt objects with SSE-KMS, you must also have the kms:GenerateDataKey and the kms:Decrypt permissions in IAM identity-based policies and KMS key policies for the target KMS key.  Encryption  For directory buckets, there are only two supported options for server-side encryption: server-side encryption with Amazon S3 managed keys (SSE-S3) (AES256) and server-side encryption with KMS keys (SSE-KMS) (aws:kms). We recommend that the bucket's default encryption uses the desired encryption configuration and you don't override the bucket default encryption in your CreateSession requests or PUT object requests. Then, new objects are automatically encrypted with the desired encryption settings. For more information, see Protecting data with server-side encryption in the Amazon S3 User Guide. For more information about the encryption overriding behaviors in directory buckets, see Specifying server-side encryption with KMS for new object uploads. For Zonal endpoint (object-level) API operations except CopyObject and UploadPartCopy, you authenticate and authorize requests through CreateSession for low latency. To encrypt new objects in a directory bucket with SSE-KMS, you must specify SSE-KMS as the directory bucket's default encryption configuration with a KMS key (specifically, a customer managed key). Then, when a session is created for Zonal endpoint API operations, new objects are automatically encrypted and decrypted with SSE-KMS and S3 Bucket Keys during the session.   Only 1 customer managed key is supported per directory bucket for the lifetime of the bucket. The Amazon Web Services managed key (aws/s3) isn't supported. After you specify SSE-KMS as your bucket's default encryption configuration with a customer managed key, you can't change the customer managed key for the bucket's SSE-KMS configuration.   In the Zonal endpoint API calls (except CopyObject and UploadPartCopy) using the REST API, you can't override the values of the encryption settings (x-amz-server-side-encryption, x-amz-server-side-encryption-aws-kms-key-id, x-amz-server-side-encryption-context, and x-amz-server-side-encryption-bucket-key-enabled) from the CreateSession request. You don't need to explicitly specify these encryption settings values in Zonal endpoint API calls, and Amazon S3 will use the encryption settings values from the CreateSession request to protect new objects in the directory bucket.   When you use the CLI or the Amazon Web Services SDKs, for CreateSession, the session token refreshes automatically to avoid service interruptions when a session expires. The CLI or the Amazon Web Services SDKs use the bucket's default encryption configuration for the CreateSession request. It's not supported to override the encryption settings values in the CreateSession request. Also, in the Zonal endpoint API calls (except CopyObject and UploadPartCopy), it's not supported to override the values of the encryption settings from the CreateSession request.    HTTP Host header syntax   Directory buckets  - The HTTP Host header syntax is  Bucket_name.s3express-az_id.region.amazonaws.com.  
    */
   createSession(params: S3.Types.CreateSessionRequest, callback?: (err: AWSError, data: S3.Types.CreateSessionOutput) => void): Request<S3.Types.CreateSessionOutput, AWSError>;
   /**
-   * Creates a session that establishes temporary security credentials to support fast authentication and authorization for the Zonal endpoint APIs on directory buckets. For more information about Zonal endpoint APIs that include the Availability Zone in the request endpoint, see S3 Express One Zone APIs in the Amazon S3 User Guide.  To make Zonal endpoint API requests on a directory bucket, use the CreateSession API operation. Specifically, you grant s3express:CreateSession permission to a bucket in a bucket policy or an IAM identity-based policy. Then, you use IAM credentials to make the CreateSession API request on the bucket, which returns temporary security credentials that include the access key ID, secret access key, session token, and expiration. These credentials have associated permissions to access the Zonal endpoint APIs. After the session is created, you don’t need to use other policies to grant permissions to each Zonal endpoint API individually. Instead, in your Zonal endpoint API requests, you sign your requests by applying the temporary security credentials of the session to the request headers and following the SigV4 protocol for authentication. You also apply the session token to the x-amz-s3session-token request header for authorization. Temporary security credentials are scoped to the bucket and expire after 5 minutes. After the expiration time, any calls that you make with those credentials will fail. You must use IAM credentials again to make a CreateSession API request that generates a new set of temporary credentials for use. Temporary credentials cannot be extended or refreshed beyond the original specified interval. If you use Amazon Web Services SDKs, SDKs handle the session token refreshes automatically to avoid service interruptions when a session expires. We recommend that you use the Amazon Web Services SDKs to initiate and manage requests to the CreateSession API. For more information, see Performance guidelines and design patterns in the Amazon S3 User Guide.    You must make requests for this API operation to the Zonal endpoint. These endpoints support virtual-hosted-style requests in the format https://bucket_name.s3express-az_id.region.amazonaws.com. Path-style requests are not supported. For more information, see Regional and Zonal endpoints in the Amazon S3 User Guide.     CopyObject API operation - Unlike other Zonal endpoint APIs, the CopyObject API operation doesn't use the temporary security credentials returned from the CreateSession API operation for authentication and authorization. For information about authentication and authorization of the CopyObject API operation on directory buckets, see CopyObject.     HeadBucket API operation - Unlike other Zonal endpoint APIs, the HeadBucket API operation doesn't use the temporary security credentials returned from the CreateSession API operation for authentication and authorization. For information about authentication and authorization of the HeadBucket API operation on directory buckets, see HeadBucket.     Permissions  To obtain temporary security credentials, you must create a bucket policy or an IAM identity-based policy that grants s3express:CreateSession permission to the bucket. In a policy, you can have the s3express:SessionMode condition key to control who can create a ReadWrite or ReadOnly session. For more information about ReadWrite or ReadOnly sessions, see  x-amz-create-session-mode . For example policies, see Example bucket policies for S3 Express One Zone and Amazon Web Services Identity and Access Management (IAM) identity-based policies for S3 Express One Zone in the Amazon S3 User Guide.  To grant cross-account access to Zonal endpoint APIs, the bucket policy should also grant both accounts the s3express:CreateSession permission.  HTTP Host header syntax   Directory buckets  - The HTTP Host header syntax is  Bucket_name.s3express-az_id.region.amazonaws.com.  
+   * Creates a session that establishes temporary security credentials to support fast authentication and authorization for the Zonal endpoint API operations on directory buckets. For more information about Zonal endpoint API operations that include the Availability Zone in the request endpoint, see S3 Express One Zone APIs in the Amazon S3 User Guide.  To make Zonal endpoint API requests on a directory bucket, use the CreateSession API operation. Specifically, you grant s3express:CreateSession permission to a bucket in a bucket policy or an IAM identity-based policy. Then, you use IAM credentials to make the CreateSession API request on the bucket, which returns temporary security credentials that include the access key ID, secret access key, session token, and expiration. These credentials have associated permissions to access the Zonal endpoint API operations. After the session is created, you don’t need to use other policies to grant permissions to each Zonal endpoint API individually. Instead, in your Zonal endpoint API requests, you sign your requests by applying the temporary security credentials of the session to the request headers and following the SigV4 protocol for authentication. You also apply the session token to the x-amz-s3session-token request header for authorization. Temporary security credentials are scoped to the bucket and expire after 5 minutes. After the expiration time, any calls that you make with those credentials will fail. You must use IAM credentials again to make a CreateSession API request that generates a new set of temporary credentials for use. Temporary credentials cannot be extended or refreshed beyond the original specified interval. If you use Amazon Web Services SDKs, SDKs handle the session token refreshes automatically to avoid service interruptions when a session expires. We recommend that you use the Amazon Web Services SDKs to initiate and manage requests to the CreateSession API. For more information, see Performance guidelines and design patterns in the Amazon S3 User Guide.    You must make requests for this API operation to the Zonal endpoint. These endpoints support virtual-hosted-style requests in the format https://bucket_name.s3express-az_id.region.amazonaws.com. Path-style requests are not supported. For more information, see Regional and Zonal endpoints in the Amazon S3 User Guide.     CopyObject API operation - Unlike other Zonal endpoint API operations, the CopyObject API operation doesn't use the temporary security credentials returned from the CreateSession API operation for authentication and authorization. For information about authentication and authorization of the CopyObject API operation on directory buckets, see CopyObject.     HeadBucket API operation - Unlike other Zonal endpoint API operations, the HeadBucket API operation doesn't use the temporary security credentials returned from the CreateSession API operation for authentication and authorization. For information about authentication and authorization of the HeadBucket API operation on directory buckets, see HeadBucket.     Permissions  To obtain temporary security credentials, you must create a bucket policy or an IAM identity-based policy that grants s3express:CreateSession permission to the bucket. In a policy, you can have the s3express:SessionMode condition key to control who can create a ReadWrite or ReadOnly session. For more information about ReadWrite or ReadOnly sessions, see  x-amz-create-session-mode . For example policies, see Example bucket policies for S3 Express One Zone and Amazon Web Services Identity and Access Management (IAM) identity-based policies for S3 Express One Zone in the Amazon S3 User Guide.  To grant cross-account access to Zonal endpoint API operations, the bucket policy should also grant both accounts the s3express:CreateSession permission. If you want to encrypt objects with SSE-KMS, you must also have the kms:GenerateDataKey and the kms:Decrypt permissions in IAM identity-based policies and KMS key policies for the target KMS key.  Encryption  For directory buckets, there are only two supported options for server-side encryption: server-side encryption with Amazon S3 managed keys (SSE-S3) (AES256) and server-side encryption with KMS keys (SSE-KMS) (aws:kms). We recommend that the bucket's default encryption uses the desired encryption configuration and you don't override the bucket default encryption in your CreateSession requests or PUT object requests. Then, new objects are automatically encrypted with the desired encryption settings. For more information, see Protecting data with server-side encryption in the Amazon S3 User Guide. For more information about the encryption overriding behaviors in directory buckets, see Specifying server-side encryption with KMS for new object uploads. For Zonal endpoint (object-level) API operations except CopyObject and UploadPartCopy, you authenticate and authorize requests through CreateSession for low latency. To encrypt new objects in a directory bucket with SSE-KMS, you must specify SSE-KMS as the directory bucket's default encryption configuration with a KMS key (specifically, a customer managed key). Then, when a session is created for Zonal endpoint API operations, new objects are automatically encrypted and decrypted with SSE-KMS and S3 Bucket Keys during the session.   Only 1 customer managed key is supported per directory bucket for the lifetime of the bucket. The Amazon Web Services managed key (aws/s3) isn't supported. After you specify SSE-KMS as your bucket's default encryption configuration with a customer managed key, you can't change the customer managed key for the bucket's SSE-KMS configuration.   In the Zonal endpoint API calls (except CopyObject and UploadPartCopy) using the REST API, you can't override the values of the encryption settings (x-amz-server-side-encryption, x-amz-server-side-encryption-aws-kms-key-id, x-amz-server-side-encryption-context, and x-amz-server-side-encryption-bucket-key-enabled) from the CreateSession request. You don't need to explicitly specify these encryption settings values in Zonal endpoint API calls, and Amazon S3 will use the encryption settings values from the CreateSession request to protect new objects in the directory bucket.   When you use the CLI or the Amazon Web Services SDKs, for CreateSession, the session token refreshes automatically to avoid service interruptions when a session expires. The CLI or the Amazon Web Services SDKs use the bucket's default encryption configuration for the CreateSession request. It's not supported to override the encryption settings values in the CreateSession request. Also, in the Zonal endpoint API calls (except CopyObject and UploadPartCopy), it's not supported to override the values of the encryption settings from the CreateSession request.    HTTP Host header syntax   Directory buckets  - The HTTP Host header syntax is  Bucket_name.s3express-az_id.region.amazonaws.com.  
    */
   createSession(callback?: (err: AWSError, data: S3.Types.CreateSessionOutput) => void): Request<S3.Types.CreateSessionOutput, AWSError>;
   /**
@@ -90,11 +90,11 @@ declare class S3 extends S3Customizations {
    */
   deleteBucketCors(callback?: (err: AWSError, data: {}) => void): Request<{}, AWSError>;
   /**
-   *  This operation is not supported by directory buckets.  This implementation of the DELETE action resets the default encryption for the bucket as server-side encryption with Amazon S3 managed keys (SSE-S3). For information about the bucket default encryption feature, see Amazon S3 Bucket Default Encryption in the Amazon S3 User Guide. To use this operation, you must have permissions to perform the s3:PutEncryptionConfiguration action. The bucket owner has this permission by default. The bucket owner can grant this permission to others. For more information about permissions, see Permissions Related to Bucket Subresource Operations and Managing Access Permissions to your Amazon S3 Resources in the Amazon S3 User Guide. The following operations are related to DeleteBucketEncryption:    PutBucketEncryption     GetBucketEncryption   
+   * This implementation of the DELETE action resets the default encryption for the bucket as server-side encryption with Amazon S3 managed keys (SSE-S3).     General purpose buckets - For information about the bucket default encryption feature, see Amazon S3 Bucket Default Encryption in the Amazon S3 User Guide.    Directory buckets - For directory buckets, there are only two supported options for server-side encryption: SSE-S3 and SSE-KMS. For information about the default encryption configuration in directory buckets, see Setting default server-side encryption behavior for directory buckets.     Permissions     General purpose bucket permissions - The s3:PutEncryptionConfiguration permission is required in a policy. The bucket owner has this permission by default. The bucket owner can grant this permission to others. For more information about permissions, see Permissions Related to Bucket Operations and Managing Access Permissions to Your Amazon S3 Resources.    Directory bucket permissions - To grant access to this API operation, you must have the s3express:PutEncryptionConfiguration permission in an IAM identity-based policy instead of a bucket policy. Cross-account access to this API operation isn't supported. This operation can only be performed by the Amazon Web Services account that owns the resource. For more information about directory bucket policies and permissions, see Amazon Web Services Identity and Access Management (IAM) for S3 Express One Zone in the Amazon S3 User Guide.    HTTP Host header syntax   Directory buckets  - The HTTP Host header syntax is s3express-control.region.amazonaws.com.   The following operations are related to DeleteBucketEncryption:    PutBucketEncryption     GetBucketEncryption   
    */
   deleteBucketEncryption(params: S3.Types.DeleteBucketEncryptionRequest, callback?: (err: AWSError, data: {}) => void): Request<{}, AWSError>;
   /**
-   *  This operation is not supported by directory buckets.  This implementation of the DELETE action resets the default encryption for the bucket as server-side encryption with Amazon S3 managed keys (SSE-S3). For information about the bucket default encryption feature, see Amazon S3 Bucket Default Encryption in the Amazon S3 User Guide. To use this operation, you must have permissions to perform the s3:PutEncryptionConfiguration action. The bucket owner has this permission by default. The bucket owner can grant this permission to others. For more information about permissions, see Permissions Related to Bucket Subresource Operations and Managing Access Permissions to your Amazon S3 Resources in the Amazon S3 User Guide. The following operations are related to DeleteBucketEncryption:    PutBucketEncryption     GetBucketEncryption   
+   * This implementation of the DELETE action resets the default encryption for the bucket as server-side encryption with Amazon S3 managed keys (SSE-S3).     General purpose buckets - For information about the bucket default encryption feature, see Amazon S3 Bucket Default Encryption in the Amazon S3 User Guide.    Directory buckets - For directory buckets, there are only two supported options for server-side encryption: SSE-S3 and SSE-KMS. For information about the default encryption configuration in directory buckets, see Setting default server-side encryption behavior for directory buckets.     Permissions     General purpose bucket permissions - The s3:PutEncryptionConfiguration permission is required in a policy. The bucket owner has this permission by default. The bucket owner can grant this permission to others. For more information about permissions, see Permissions Related to Bucket Operations and Managing Access Permissions to Your Amazon S3 Resources.    Directory bucket permissions - To grant access to this API operation, you must have the s3express:PutEncryptionConfiguration permission in an IAM identity-based policy instead of a bucket policy. Cross-account access to this API operation isn't supported. This operation can only be performed by the Amazon Web Services account that owns the resource. For more information about directory bucket policies and permissions, see Amazon Web Services Identity and Access Management (IAM) for S3 Express One Zone in the Amazon S3 User Guide.    HTTP Host header syntax   Directory buckets  - The HTTP Host header syntax is s3express-control.region.amazonaws.com.   The following operations are related to DeleteBucketEncryption:    PutBucketEncryption     GetBucketEncryption   
    */
   deleteBucketEncryption(callback?: (err: AWSError, data: {}) => void): Request<{}, AWSError>;
   /**
@@ -170,11 +170,11 @@ declare class S3 extends S3Customizations {
    */
   deleteBucketWebsite(callback?: (err: AWSError, data: {}) => void): Request<{}, AWSError>;
   /**
-   * Removes an object from a bucket. The behavior depends on the bucket's versioning state:    If bucket versioning is not enabled, the operation permanently deletes the object.   If bucket versioning is enabled, the operation inserts a delete marker, which becomes the current version of the object. To permanently delete an object in a versioned bucket, you must include the object’s versionId in the request. For more information about versioning-enabled buckets, see Deleting object versions from a versioning-enabled bucket.   If bucket versioning is suspended, the operation removes the object that has a null versionId, if there is one, and inserts a delete marker that becomes the current version of the object. If there isn't an object with a null versionId, and all versions of the object have a versionId, Amazon S3 does not remove the object and only inserts a delete marker. To permanently delete an object that has a versionId, you must include the object’s versionId in the request. For more information about versioning-suspended buckets, see Deleting objects from versioning-suspended buckets.       Directory buckets - S3 Versioning isn't enabled and supported for directory buckets. For this API operation, only the null value of the version ID is supported by directory buckets. You can only specify null to the versionId query parameter in the request.    Directory buckets - For directory buckets, you must make requests for this API operation to the Zonal endpoint. These endpoints support virtual-hosted-style requests in the format https://bucket_name.s3express-az_id.region.amazonaws.com/key-name . Path-style requests are not supported. For more information, see Regional and Zonal endpoints in the Amazon S3 User Guide.    To remove a specific version, you must use the versionId query parameter. Using this query parameter permanently deletes the version. If the object deleted is a delete marker, Amazon S3 sets the response header x-amz-delete-marker to true.  If the object you want to delete is in a bucket where the bucket versioning configuration is MFA Delete enabled, you must include the x-amz-mfa request header in the DELETE versionId request. Requests that include x-amz-mfa must use HTTPS. For more information about MFA Delete, see Using MFA Delete in the Amazon S3 User Guide. To see sample requests that use versioning, see Sample Request.    Directory buckets - MFA delete is not supported by directory buckets.  You can delete objects by explicitly calling DELETE Object or calling (PutBucketLifecycle) to enable Amazon S3 to remove them for you. If you want to block users or accounts from removing or deleting objects from your bucket, you must deny them the s3:DeleteObject, s3:DeleteObjectVersion, and s3:PutLifeCycleConfiguration actions.    Directory buckets - S3 Lifecycle is not supported by directory buckets.   Permissions     General purpose bucket permissions - The following permissions are required in your policies when your DeleteObjects request includes specific headers.     s3:DeleteObject  - To delete an object from a bucket, you must always have the s3:DeleteObject permission.     s3:DeleteObjectVersion  - To delete a specific version of an object from a versioning-enabled bucket, you must have the s3:DeleteObjectVersion permission.      Directory bucket permissions - To grant access to this API operation on a directory bucket, we recommend that you use the  CreateSession  API operation for session-based authorization. Specifically, you grant the s3express:CreateSession permission to the directory bucket in a bucket policy or an IAM identity-based policy. Then, you make the CreateSession API call on the bucket to obtain a session token. With the session token in your request header, you can make API requests to this operation. After the session token expires, you make another CreateSession API call to generate a new session token for use. Amazon Web Services CLI or SDKs create session and refresh the session token automatically to avoid service interruptions when a session expires. For more information about authorization, see  CreateSession .    HTTP Host header syntax   Directory buckets  - The HTTP Host header syntax is  Bucket_name.s3express-az_id.region.amazonaws.com.   The following action is related to DeleteObject:    PutObject   
+   * Removes an object from a bucket. The behavior depends on the bucket's versioning state. For more information, see Best practices to consider before deleting an object. To remove a specific version, you must use the versionId query parameter. Using this query parameter permanently deletes the version. If the object deleted is a delete marker, Amazon S3 sets the response header x-amz-delete-marker to true. If the object you want to delete is in a bucket where the bucket versioning configuration is MFA delete enabled, you must include the x-amz-mfa request header in the DELETE versionId request. Requests that include x-amz-mfa must use HTTPS. For more information about MFA delete and to see example requests, see Using MFA delete and Sample request in the Amazon S3 User Guide.    S3 Versioning isn't enabled and supported for directory buckets. For this API operation, only the null value of the version ID is supported by directory buckets. You can only specify null to the versionId query parameter in the request.   For directory buckets, you must make requests for this API operation to the Zonal endpoint. These endpoints support virtual-hosted-style requests in the format https://bucket_name.s3express-az_id.region.amazonaws.com/key-name . Path-style requests are not supported. For more information, see Regional and Zonal endpoints in the Amazon S3 User Guide.   MFA delete is not supported by directory buckets.     Permissions     General purpose bucket permissions - The following permissions are required in your policies when your DeleteObjects request includes specific headers.     s3:DeleteObject  - To delete an object from a bucket, you must always have the s3:DeleteObject permission.  You can also use PutBucketLifecycle to delete objects in Amazon S3.      s3:DeleteObjectVersion  - To delete a specific version of an object from a versioning-enabled bucket, you must have the s3:DeleteObjectVersion permission.   If you want to block users or accounts from removing or deleting objects from your bucket, you must deny them the s3:DeleteObject, s3:DeleteObjectVersion, and s3:PutLifeCycleConfiguration permissions.      Directory buckets permissions - To grant access to this API operation on a directory bucket, we recommend that you use the CreateSession API operation for session-based authorization.    HTTP Host header syntax   Directory buckets  - The HTTP Host header syntax is  Bucket_name.s3express-az_id.region.amazonaws.com.   The following action is related to DeleteObject:    PutObject   
    */
   deleteObject(params: S3.Types.DeleteObjectRequest, callback?: (err: AWSError, data: S3.Types.DeleteObjectOutput) => void): Request<S3.Types.DeleteObjectOutput, AWSError>;
   /**
-   * Removes an object from a bucket. The behavior depends on the bucket's versioning state:    If bucket versioning is not enabled, the operation permanently deletes the object.   If bucket versioning is enabled, the operation inserts a delete marker, which becomes the current version of the object. To permanently delete an object in a versioned bucket, you must include the object’s versionId in the request. For more information about versioning-enabled buckets, see Deleting object versions from a versioning-enabled bucket.   If bucket versioning is suspended, the operation removes the object that has a null versionId, if there is one, and inserts a delete marker that becomes the current version of the object. If there isn't an object with a null versionId, and all versions of the object have a versionId, Amazon S3 does not remove the object and only inserts a delete marker. To permanently delete an object that has a versionId, you must include the object’s versionId in the request. For more information about versioning-suspended buckets, see Deleting objects from versioning-suspended buckets.       Directory buckets - S3 Versioning isn't enabled and supported for directory buckets. For this API operation, only the null value of the version ID is supported by directory buckets. You can only specify null to the versionId query parameter in the request.    Directory buckets - For directory buckets, you must make requests for this API operation to the Zonal endpoint. These endpoints support virtual-hosted-style requests in the format https://bucket_name.s3express-az_id.region.amazonaws.com/key-name . Path-style requests are not supported. For more information, see Regional and Zonal endpoints in the Amazon S3 User Guide.    To remove a specific version, you must use the versionId query parameter. Using this query parameter permanently deletes the version. If the object deleted is a delete marker, Amazon S3 sets the response header x-amz-delete-marker to true.  If the object you want to delete is in a bucket where the bucket versioning configuration is MFA Delete enabled, you must include the x-amz-mfa request header in the DELETE versionId request. Requests that include x-amz-mfa must use HTTPS. For more information about MFA Delete, see Using MFA Delete in the Amazon S3 User Guide. To see sample requests that use versioning, see Sample Request.    Directory buckets - MFA delete is not supported by directory buckets.  You can delete objects by explicitly calling DELETE Object or calling (PutBucketLifecycle) to enable Amazon S3 to remove them for you. If you want to block users or accounts from removing or deleting objects from your bucket, you must deny them the s3:DeleteObject, s3:DeleteObjectVersion, and s3:PutLifeCycleConfiguration actions.    Directory buckets - S3 Lifecycle is not supported by directory buckets.   Permissions     General purpose bucket permissions - The following permissions are required in your policies when your DeleteObjects request includes specific headers.     s3:DeleteObject  - To delete an object from a bucket, you must always have the s3:DeleteObject permission.     s3:DeleteObjectVersion  - To delete a specific version of an object from a versioning-enabled bucket, you must have the s3:DeleteObjectVersion permission.      Directory bucket permissions - To grant access to this API operation on a directory bucket, we recommend that you use the  CreateSession  API operation for session-based authorization. Specifically, you grant the s3express:CreateSession permission to the directory bucket in a bucket policy or an IAM identity-based policy. Then, you make the CreateSession API call on the bucket to obtain a session token. With the session token in your request header, you can make API requests to this operation. After the session token expires, you make another CreateSession API call to generate a new session token for use. Amazon Web Services CLI or SDKs create session and refresh the session token automatically to avoid service interruptions when a session expires. For more information about authorization, see  CreateSession .    HTTP Host header syntax   Directory buckets  - The HTTP Host header syntax is  Bucket_name.s3express-az_id.region.amazonaws.com.   The following action is related to DeleteObject:    PutObject   
+   * Removes an object from a bucket. The behavior depends on the bucket's versioning state. For more information, see Best practices to consider before deleting an object. To remove a specific version, you must use the versionId query parameter. Using this query parameter permanently deletes the version. If the object deleted is a delete marker, Amazon S3 sets the response header x-amz-delete-marker to true. If the object you want to delete is in a bucket where the bucket versioning configuration is MFA delete enabled, you must include the x-amz-mfa request header in the DELETE versionId request. Requests that include x-amz-mfa must use HTTPS. For more information about MFA delete and to see example requests, see Using MFA delete and Sample request in the Amazon S3 User Guide.    S3 Versioning isn't enabled and supported for directory buckets. For this API operation, only the null value of the version ID is supported by directory buckets. You can only specify null to the versionId query parameter in the request.   For directory buckets, you must make requests for this API operation to the Zonal endpoint. These endpoints support virtual-hosted-style requests in the format https://bucket_name.s3express-az_id.region.amazonaws.com/key-name . Path-style requests are not supported. For more information, see Regional and Zonal endpoints in the Amazon S3 User Guide.   MFA delete is not supported by directory buckets.     Permissions     General purpose bucket permissions - The following permissions are required in your policies when your DeleteObjects request includes specific headers.     s3:DeleteObject  - To delete an object from a bucket, you must always have the s3:DeleteObject permission.  You can also use PutBucketLifecycle to delete objects in Amazon S3.      s3:DeleteObjectVersion  - To delete a specific version of an object from a versioning-enabled bucket, you must have the s3:DeleteObjectVersion permission.   If you want to block users or accounts from removing or deleting objects from your bucket, you must deny them the s3:DeleteObject, s3:DeleteObjectVersion, and s3:PutLifeCycleConfiguration permissions.      Directory buckets permissions - To grant access to this API operation on a directory bucket, we recommend that you use the CreateSession API operation for session-based authorization.    HTTP Host header syntax   Directory buckets  - The HTTP Host header syntax is  Bucket_name.s3express-az_id.region.amazonaws.com.   The following action is related to DeleteObject:    PutObject   
    */
   deleteObject(callback?: (err: AWSError, data: S3.Types.DeleteObjectOutput) => void): Request<S3.Types.DeleteObjectOutput, AWSError>;
   /**
@@ -234,11 +234,11 @@ declare class S3 extends S3Customizations {
    */
   getBucketCors(callback?: (err: AWSError, data: S3.Types.GetBucketCorsOutput) => void): Request<S3.Types.GetBucketCorsOutput, AWSError>;
   /**
-   *  This operation is not supported by directory buckets.  Returns the default encryption configuration for an Amazon S3 bucket. By default, all buckets have a default encryption configuration that uses server-side encryption with Amazon S3 managed keys (SSE-S3). For information about the bucket default encryption feature, see Amazon S3 Bucket Default Encryption in the Amazon S3 User Guide. To use this operation, you must have permission to perform the s3:GetEncryptionConfiguration action. The bucket owner has this permission by default. The bucket owner can grant this permission to others. For more information about permissions, see Permissions Related to Bucket Subresource Operations and Managing Access Permissions to Your Amazon S3 Resources. The following operations are related to GetBucketEncryption:    PutBucketEncryption     DeleteBucketEncryption   
+   * Returns the default encryption configuration for an Amazon S3 bucket. By default, all buckets have a default encryption configuration that uses server-side encryption with Amazon S3 managed keys (SSE-S3).      General purpose buckets - For information about the bucket default encryption feature, see Amazon S3 Bucket Default Encryption in the Amazon S3 User Guide.    Directory buckets - For directory buckets, there are only two supported options for server-side encryption: SSE-S3 and SSE-KMS. For information about the default encryption configuration in directory buckets, see Setting default server-side encryption behavior for directory buckets.     Permissions     General purpose bucket permissions - The s3:GetEncryptionConfiguration permission is required in a policy. The bucket owner has this permission by default. The bucket owner can grant this permission to others. For more information about permissions, see Permissions Related to Bucket Operations and Managing Access Permissions to Your Amazon S3 Resources.    Directory bucket permissions - To grant access to this API operation, you must have the s3express:GetEncryptionConfiguration permission in an IAM identity-based policy instead of a bucket policy. Cross-account access to this API operation isn't supported. This operation can only be performed by the Amazon Web Services account that owns the resource. For more information about directory bucket policies and permissions, see Amazon Web Services Identity and Access Management (IAM) for S3 Express One Zone in the Amazon S3 User Guide.    HTTP Host header syntax   Directory buckets  - The HTTP Host header syntax is s3express-control.region.amazonaws.com.   The following operations are related to GetBucketEncryption:    PutBucketEncryption     DeleteBucketEncryption   
    */
   getBucketEncryption(params: S3.Types.GetBucketEncryptionRequest, callback?: (err: AWSError, data: S3.Types.GetBucketEncryptionOutput) => void): Request<S3.Types.GetBucketEncryptionOutput, AWSError>;
   /**
-   *  This operation is not supported by directory buckets.  Returns the default encryption configuration for an Amazon S3 bucket. By default, all buckets have a default encryption configuration that uses server-side encryption with Amazon S3 managed keys (SSE-S3). For information about the bucket default encryption feature, see Amazon S3 Bucket Default Encryption in the Amazon S3 User Guide. To use this operation, you must have permission to perform the s3:GetEncryptionConfiguration action. The bucket owner has this permission by default. The bucket owner can grant this permission to others. For more information about permissions, see Permissions Related to Bucket Subresource Operations and Managing Access Permissions to Your Amazon S3 Resources. The following operations are related to GetBucketEncryption:    PutBucketEncryption     DeleteBucketEncryption   
+   * Returns the default encryption configuration for an Amazon S3 bucket. By default, all buckets have a default encryption configuration that uses server-side encryption with Amazon S3 managed keys (SSE-S3).      General purpose buckets - For information about the bucket default encryption feature, see Amazon S3 Bucket Default Encryption in the Amazon S3 User Guide.    Directory buckets - For directory buckets, there are only two supported options for server-side encryption: SSE-S3 and SSE-KMS. For information about the default encryption configuration in directory buckets, see Setting default server-side encryption behavior for directory buckets.     Permissions     General purpose bucket permissions - The s3:GetEncryptionConfiguration permission is required in a policy. The bucket owner has this permission by default. The bucket owner can grant this permission to others. For more information about permissions, see Permissions Related to Bucket Operations and Managing Access Permissions to Your Amazon S3 Resources.    Directory bucket permissions - To grant access to this API operation, you must have the s3express:GetEncryptionConfiguration permission in an IAM identity-based policy instead of a bucket policy. Cross-account access to this API operation isn't supported. This operation can only be performed by the Amazon Web Services account that owns the resource. For more information about directory bucket policies and permissions, see Amazon Web Services Identity and Access Management (IAM) for S3 Express One Zone in the Amazon S3 User Guide.    HTTP Host header syntax   Directory buckets  - The HTTP Host header syntax is s3express-control.region.amazonaws.com.   The following operations are related to GetBucketEncryption:    PutBucketEncryption     DeleteBucketEncryption   
    */
   getBucketEncryption(callback?: (err: AWSError, data: S3.Types.GetBucketEncryptionOutput) => void): Request<S3.Types.GetBucketEncryptionOutput, AWSError>;
   /**
@@ -378,11 +378,11 @@ declare class S3 extends S3Customizations {
    */
   getBucketWebsite(callback?: (err: AWSError, data: S3.Types.GetBucketWebsiteOutput) => void): Request<S3.Types.GetBucketWebsiteOutput, AWSError>;
   /**
-   * Retrieves an object from Amazon S3. In the GetObject request, specify the full key name for the object.  General purpose buckets - Both the virtual-hosted-style requests and the path-style requests are supported. For a virtual hosted-style request example, if you have the object photos/2006/February/sample.jpg, specify the object key name as /photos/2006/February/sample.jpg. For a path-style request example, if you have the object photos/2006/February/sample.jpg in the bucket named examplebucket, specify the object key name as /examplebucket/photos/2006/February/sample.jpg. For more information about request types, see HTTP Host Header Bucket Specification in the Amazon S3 User Guide.  Directory buckets - Only virtual-hosted-style requests are supported. For a virtual hosted-style request example, if you have the object photos/2006/February/sample.jpg in the bucket named examplebucket--use1-az5--x-s3, specify the object key name as /photos/2006/February/sample.jpg. Also, when you make requests to this API operation, your requests are sent to the Zonal endpoint. These endpoints support virtual-hosted-style requests in the format https://bucket_name.s3express-az_id.region.amazonaws.com/key-name . Path-style requests are not supported. For more information, see Regional and Zonal endpoints in the Amazon S3 User Guide.  Permissions     General purpose bucket permissions - You must have the required permissions in a policy. To use GetObject, you must have the READ access to the object (or version). If you grant READ access to the anonymous user, the GetObject operation returns the object without using an authorization header. For more information, see Specifying permissions in a policy in the Amazon S3 User Guide. If you include a versionId in your request header, you must have the s3:GetObjectVersion permission to access a specific version of an object. The s3:GetObject permission is not required in this scenario. If you request the current version of an object without a specific versionId in the request header, only the s3:GetObject permission is required. The s3:GetObjectVersion permission is not required in this scenario.  If the object that you request doesn’t exist, the error that Amazon S3 returns depends on whether you also have the s3:ListBucket permission.   If you have the s3:ListBucket permission on the bucket, Amazon S3 returns an HTTP status code 404 Not Found error.   If you don’t have the s3:ListBucket permission, Amazon S3 returns an HTTP status code 403 Access Denied error.      Directory bucket permissions - To grant access to this API operation on a directory bucket, we recommend that you use the  CreateSession  API operation for session-based authorization. Specifically, you grant the s3express:CreateSession permission to the directory bucket in a bucket policy or an IAM identity-based policy. Then, you make the CreateSession API call on the bucket to obtain a session token. With the session token in your request header, you can make API requests to this operation. After the session token expires, you make another CreateSession API call to generate a new session token for use. Amazon Web Services CLI or SDKs create session and refresh the session token automatically to avoid service interruptions when a session expires. For more information about authorization, see  CreateSession .    Storage classes  If the object you are retrieving is stored in the S3 Glacier Flexible Retrieval storage class, the S3 Glacier Deep Archive storage class, the S3 Intelligent-Tiering Archive Access tier, or the S3 Intelligent-Tiering Deep Archive Access tier, before you can retrieve the object you must first restore a copy using RestoreObject. Otherwise, this operation returns an InvalidObjectState error. For information about restoring archived objects, see Restoring Archived Objects in the Amazon S3 User Guide.  Directory buckets  - For directory buckets, only the S3 Express One Zone storage class is supported to store newly created objects. Unsupported storage class values won't write a destination object and will respond with the HTTP status code 400 Bad Request.  Encryption  Encryption request headers, like x-amz-server-side-encryption, should not be sent for the GetObject requests, if your object uses server-side encryption with Amazon S3 managed encryption keys (SSE-S3), server-side encryption with Key Management Service (KMS) keys (SSE-KMS), or dual-layer server-side encryption with Amazon Web Services KMS keys (DSSE-KMS). If you include the header in your GetObject requests for the object that uses these types of keys, you’ll get an HTTP 400 Bad Request error.  Overriding response header values through the request  There are times when you want to override certain response header values of a GetObject response. For example, you might override the Content-Disposition response header value through your GetObject request. You can override values for a set of response headers. These modified response header values are included only in a successful response, that is, when the HTTP status code 200 OK is returned. The headers you can override using the following query parameters in the request are a subset of the headers that Amazon S3 accepts when you create an object.  The response headers that you can override for the GetObject response are Cache-Control, Content-Disposition, Content-Encoding, Content-Language, Content-Type, and Expires. To override values for a set of response headers in the GetObject response, you can use the following query parameters in the request.    response-cache-control     response-content-disposition     response-content-encoding     response-content-language     response-content-type     response-expires     When you use these parameters, you must sign the request by using either an Authorization header or a presigned URL. These parameters cannot be used with an unsigned (anonymous) request.   HTTP Host header syntax   Directory buckets  - The HTTP Host header syntax is  Bucket_name.s3express-az_id.region.amazonaws.com.   The following operations are related to GetObject:    ListBuckets     GetObjectAcl   
+   * Retrieves an object from Amazon S3. In the GetObject request, specify the full key name for the object.  General purpose buckets - Both the virtual-hosted-style requests and the path-style requests are supported. For a virtual hosted-style request example, if you have the object photos/2006/February/sample.jpg, specify the object key name as /photos/2006/February/sample.jpg. For a path-style request example, if you have the object photos/2006/February/sample.jpg in the bucket named examplebucket, specify the object key name as /examplebucket/photos/2006/February/sample.jpg. For more information about request types, see HTTP Host Header Bucket Specification in the Amazon S3 User Guide.  Directory buckets - Only virtual-hosted-style requests are supported. For a virtual hosted-style request example, if you have the object photos/2006/February/sample.jpg in the bucket named examplebucket--use1-az5--x-s3, specify the object key name as /photos/2006/February/sample.jpg. Also, when you make requests to this API operation, your requests are sent to the Zonal endpoint. These endpoints support virtual-hosted-style requests in the format https://bucket_name.s3express-az_id.region.amazonaws.com/key-name . Path-style requests are not supported. For more information, see Regional and Zonal endpoints in the Amazon S3 User Guide.  Permissions     General purpose bucket permissions - You must have the required permissions in a policy. To use GetObject, you must have the READ access to the object (or version). If you grant READ access to the anonymous user, the GetObject operation returns the object without using an authorization header. For more information, see Specifying permissions in a policy in the Amazon S3 User Guide. If you include a versionId in your request header, you must have the s3:GetObjectVersion permission to access a specific version of an object. The s3:GetObject permission is not required in this scenario. If you request the current version of an object without a specific versionId in the request header, only the s3:GetObject permission is required. The s3:GetObjectVersion permission is not required in this scenario.  If the object that you request doesn’t exist, the error that Amazon S3 returns depends on whether you also have the s3:ListBucket permission.   If you have the s3:ListBucket permission on the bucket, Amazon S3 returns an HTTP status code 404 Not Found error.   If you don’t have the s3:ListBucket permission, Amazon S3 returns an HTTP status code 403 Access Denied error.      Directory bucket permissions - To grant access to this API operation on a directory bucket, we recommend that you use the  CreateSession  API operation for session-based authorization. Specifically, you grant the s3express:CreateSession permission to the directory bucket in a bucket policy or an IAM identity-based policy. Then, you make the CreateSession API call on the bucket to obtain a session token. With the session token in your request header, you can make API requests to this operation. After the session token expires, you make another CreateSession API call to generate a new session token for use. Amazon Web Services CLI or SDKs create session and refresh the session token automatically to avoid service interruptions when a session expires. For more information about authorization, see  CreateSession . If the object is encrypted using SSE-KMS, you must also have the kms:GenerateDataKey and kms:Decrypt permissions in IAM identity-based policies and KMS key policies for the KMS key.    Storage classes  If the object you are retrieving is stored in the S3 Glacier Flexible Retrieval storage class, the S3 Glacier Deep Archive storage class, the S3 Intelligent-Tiering Archive Access tier, or the S3 Intelligent-Tiering Deep Archive Access tier, before you can retrieve the object you must first restore a copy using RestoreObject. Otherwise, this operation returns an InvalidObjectState error. For information about restoring archived objects, see Restoring Archived Objects in the Amazon S3 User Guide.  Directory buckets  - For directory buckets, only the S3 Express One Zone storage class is supported to store newly created objects. Unsupported storage class values won't write a destination object and will respond with the HTTP status code 400 Bad Request.  Encryption  Encryption request headers, like x-amz-server-side-encryption, should not be sent for the GetObject requests, if your object uses server-side encryption with Amazon S3 managed encryption keys (SSE-S3), server-side encryption with Key Management Service (KMS) keys (SSE-KMS), or dual-layer server-side encryption with Amazon Web Services KMS keys (DSSE-KMS). If you include the header in your GetObject requests for the object that uses these types of keys, you’ll get an HTTP 400 Bad Request error.  Directory buckets - For directory buckets, there are only two supported options for server-side encryption: SSE-S3 and SSE-KMS. SSE-C isn't supported. For more information, see Protecting data with server-side encryption in the Amazon S3 User Guide.  Overriding response header values through the request  There are times when you want to override certain response header values of a GetObject response. For example, you might override the Content-Disposition response header value through your GetObject request. You can override values for a set of response headers. These modified response header values are included only in a successful response, that is, when the HTTP status code 200 OK is returned. The headers you can override using the following query parameters in the request are a subset of the headers that Amazon S3 accepts when you create an object.  The response headers that you can override for the GetObject response are Cache-Control, Content-Disposition, Content-Encoding, Content-Language, Content-Type, and Expires. To override values for a set of response headers in the GetObject response, you can use the following query parameters in the request.    response-cache-control     response-content-disposition     response-content-encoding     response-content-language     response-content-type     response-expires     When you use these parameters, you must sign the request by using either an Authorization header or a presigned URL. These parameters cannot be used with an unsigned (anonymous) request.   HTTP Host header syntax   Directory buckets  - The HTTP Host header syntax is  Bucket_name.s3express-az_id.region.amazonaws.com.   The following operations are related to GetObject:    ListBuckets     GetObjectAcl   
    */
   getObject(params: S3.Types.GetObjectRequest, callback?: (err: AWSError, data: S3.Types.GetObjectOutput) => void): Request<S3.Types.GetObjectOutput, AWSError>;
   /**
-   * Retrieves an object from Amazon S3. In the GetObject request, specify the full key name for the object.  General purpose buckets - Both the virtual-hosted-style requests and the path-style requests are supported. For a virtual hosted-style request example, if you have the object photos/2006/February/sample.jpg, specify the object key name as /photos/2006/February/sample.jpg. For a path-style request example, if you have the object photos/2006/February/sample.jpg in the bucket named examplebucket, specify the object key name as /examplebucket/photos/2006/February/sample.jpg. For more information about request types, see HTTP Host Header Bucket Specification in the Amazon S3 User Guide.  Directory buckets - Only virtual-hosted-style requests are supported. For a virtual hosted-style request example, if you have the object photos/2006/February/sample.jpg in the bucket named examplebucket--use1-az5--x-s3, specify the object key name as /photos/2006/February/sample.jpg. Also, when you make requests to this API operation, your requests are sent to the Zonal endpoint. These endpoints support virtual-hosted-style requests in the format https://bucket_name.s3express-az_id.region.amazonaws.com/key-name . Path-style requests are not supported. For more information, see Regional and Zonal endpoints in the Amazon S3 User Guide.  Permissions     General purpose bucket permissions - You must have the required permissions in a policy. To use GetObject, you must have the READ access to the object (or version). If you grant READ access to the anonymous user, the GetObject operation returns the object without using an authorization header. For more information, see Specifying permissions in a policy in the Amazon S3 User Guide. If you include a versionId in your request header, you must have the s3:GetObjectVersion permission to access a specific version of an object. The s3:GetObject permission is not required in this scenario. If you request the current version of an object without a specific versionId in the request header, only the s3:GetObject permission is required. The s3:GetObjectVersion permission is not required in this scenario.  If the object that you request doesn’t exist, the error that Amazon S3 returns depends on whether you also have the s3:ListBucket permission.   If you have the s3:ListBucket permission on the bucket, Amazon S3 returns an HTTP status code 404 Not Found error.   If you don’t have the s3:ListBucket permission, Amazon S3 returns an HTTP status code 403 Access Denied error.      Directory bucket permissions - To grant access to this API operation on a directory bucket, we recommend that you use the  CreateSession  API operation for session-based authorization. Specifically, you grant the s3express:CreateSession permission to the directory bucket in a bucket policy or an IAM identity-based policy. Then, you make the CreateSession API call on the bucket to obtain a session token. With the session token in your request header, you can make API requests to this operation. After the session token expires, you make another CreateSession API call to generate a new session token for use. Amazon Web Services CLI or SDKs create session and refresh the session token automatically to avoid service interruptions when a session expires. For more information about authorization, see  CreateSession .    Storage classes  If the object you are retrieving is stored in the S3 Glacier Flexible Retrieval storage class, the S3 Glacier Deep Archive storage class, the S3 Intelligent-Tiering Archive Access tier, or the S3 Intelligent-Tiering Deep Archive Access tier, before you can retrieve the object you must first restore a copy using RestoreObject. Otherwise, this operation returns an InvalidObjectState error. For information about restoring archived objects, see Restoring Archived Objects in the Amazon S3 User Guide.  Directory buckets  - For directory buckets, only the S3 Express One Zone storage class is supported to store newly created objects. Unsupported storage class values won't write a destination object and will respond with the HTTP status code 400 Bad Request.  Encryption  Encryption request headers, like x-amz-server-side-encryption, should not be sent for the GetObject requests, if your object uses server-side encryption with Amazon S3 managed encryption keys (SSE-S3), server-side encryption with Key Management Service (KMS) keys (SSE-KMS), or dual-layer server-side encryption with Amazon Web Services KMS keys (DSSE-KMS). If you include the header in your GetObject requests for the object that uses these types of keys, you’ll get an HTTP 400 Bad Request error.  Overriding response header values through the request  There are times when you want to override certain response header values of a GetObject response. For example, you might override the Content-Disposition response header value through your GetObject request. You can override values for a set of response headers. These modified response header values are included only in a successful response, that is, when the HTTP status code 200 OK is returned. The headers you can override using the following query parameters in the request are a subset of the headers that Amazon S3 accepts when you create an object.  The response headers that you can override for the GetObject response are Cache-Control, Content-Disposition, Content-Encoding, Content-Language, Content-Type, and Expires. To override values for a set of response headers in the GetObject response, you can use the following query parameters in the request.    response-cache-control     response-content-disposition     response-content-encoding     response-content-language     response-content-type     response-expires     When you use these parameters, you must sign the request by using either an Authorization header or a presigned URL. These parameters cannot be used with an unsigned (anonymous) request.   HTTP Host header syntax   Directory buckets  - The HTTP Host header syntax is  Bucket_name.s3express-az_id.region.amazonaws.com.   The following operations are related to GetObject:    ListBuckets     GetObjectAcl   
+   * Retrieves an object from Amazon S3. In the GetObject request, specify the full key name for the object.  General purpose buckets - Both the virtual-hosted-style requests and the path-style requests are supported. For a virtual hosted-style request example, if you have the object photos/2006/February/sample.jpg, specify the object key name as /photos/2006/February/sample.jpg. For a path-style request example, if you have the object photos/2006/February/sample.jpg in the bucket named examplebucket, specify the object key name as /examplebucket/photos/2006/February/sample.jpg. For more information about request types, see HTTP Host Header Bucket Specification in the Amazon S3 User Guide.  Directory buckets - Only virtual-hosted-style requests are supported. For a virtual hosted-style request example, if you have the object photos/2006/February/sample.jpg in the bucket named examplebucket--use1-az5--x-s3, specify the object key name as /photos/2006/February/sample.jpg. Also, when you make requests to this API operation, your requests are sent to the Zonal endpoint. These endpoints support virtual-hosted-style requests in the format https://bucket_name.s3express-az_id.region.amazonaws.com/key-name . Path-style requests are not supported. For more information, see Regional and Zonal endpoints in the Amazon S3 User Guide.  Permissions     General purpose bucket permissions - You must have the required permissions in a policy. To use GetObject, you must have the READ access to the object (or version). If you grant READ access to the anonymous user, the GetObject operation returns the object without using an authorization header. For more information, see Specifying permissions in a policy in the Amazon S3 User Guide. If you include a versionId in your request header, you must have the s3:GetObjectVersion permission to access a specific version of an object. The s3:GetObject permission is not required in this scenario. If you request the current version of an object without a specific versionId in the request header, only the s3:GetObject permission is required. The s3:GetObjectVersion permission is not required in this scenario.  If the object that you request doesn’t exist, the error that Amazon S3 returns depends on whether you also have the s3:ListBucket permission.   If you have the s3:ListBucket permission on the bucket, Amazon S3 returns an HTTP status code 404 Not Found error.   If you don’t have the s3:ListBucket permission, Amazon S3 returns an HTTP status code 403 Access Denied error.      Directory bucket permissions - To grant access to this API operation on a directory bucket, we recommend that you use the  CreateSession  API operation for session-based authorization. Specifically, you grant the s3express:CreateSession permission to the directory bucket in a bucket policy or an IAM identity-based policy. Then, you make the CreateSession API call on the bucket to obtain a session token. With the session token in your request header, you can make API requests to this operation. After the session token expires, you make another CreateSession API call to generate a new session token for use. Amazon Web Services CLI or SDKs create session and refresh the session token automatically to avoid service interruptions when a session expires. For more information about authorization, see  CreateSession . If the object is encrypted using SSE-KMS, you must also have the kms:GenerateDataKey and kms:Decrypt permissions in IAM identity-based policies and KMS key policies for the KMS key.    Storage classes  If the object you are retrieving is stored in the S3 Glacier Flexible Retrieval storage class, the S3 Glacier Deep Archive storage class, the S3 Intelligent-Tiering Archive Access tier, or the S3 Intelligent-Tiering Deep Archive Access tier, before you can retrieve the object you must first restore a copy using RestoreObject. Otherwise, this operation returns an InvalidObjectState error. For information about restoring archived objects, see Restoring Archived Objects in the Amazon S3 User Guide.  Directory buckets  - For directory buckets, only the S3 Express One Zone storage class is supported to store newly created objects. Unsupported storage class values won't write a destination object and will respond with the HTTP status code 400 Bad Request.  Encryption  Encryption request headers, like x-amz-server-side-encryption, should not be sent for the GetObject requests, if your object uses server-side encryption with Amazon S3 managed encryption keys (SSE-S3), server-side encryption with Key Management Service (KMS) keys (SSE-KMS), or dual-layer server-side encryption with Amazon Web Services KMS keys (DSSE-KMS). If you include the header in your GetObject requests for the object that uses these types of keys, you’ll get an HTTP 400 Bad Request error.  Directory buckets - For directory buckets, there are only two supported options for server-side encryption: SSE-S3 and SSE-KMS. SSE-C isn't supported. For more information, see Protecting data with server-side encryption in the Amazon S3 User Guide.  Overriding response header values through the request  There are times when you want to override certain response header values of a GetObject response. For example, you might override the Content-Disposition response header value through your GetObject request. You can override values for a set of response headers. These modified response header values are included only in a successful response, that is, when the HTTP status code 200 OK is returned. The headers you can override using the following query parameters in the request are a subset of the headers that Amazon S3 accepts when you create an object.  The response headers that you can override for the GetObject response are Cache-Control, Content-Disposition, Content-Encoding, Content-Language, Content-Type, and Expires. To override values for a set of response headers in the GetObject response, you can use the following query parameters in the request.    response-cache-control     response-content-disposition     response-content-encoding     response-content-language     response-content-type     response-expires     When you use these parameters, you must sign the request by using either an Authorization header or a presigned URL. These parameters cannot be used with an unsigned (anonymous) request.   HTTP Host header syntax   Directory buckets  - The HTTP Host header syntax is  Bucket_name.s3express-az_id.region.amazonaws.com.   The following operations are related to GetObject:    ListBuckets     GetObjectAcl   
    */
   getObject(callback?: (err: AWSError, data: S3.Types.GetObjectOutput) => void): Request<S3.Types.GetObjectOutput, AWSError>;
   /**
@@ -394,11 +394,11 @@ declare class S3 extends S3Customizations {
    */
   getObjectAcl(callback?: (err: AWSError, data: S3.Types.GetObjectAclOutput) => void): Request<S3.Types.GetObjectAclOutput, AWSError>;
   /**
-   * Retrieves all the metadata from an object without returning the object itself. This operation is useful if you're interested only in an object's metadata.   GetObjectAttributes combines the functionality of HeadObject and ListParts. All of the data returned with each of those individual calls can be returned with a single call to GetObjectAttributes.   Directory buckets - For directory buckets, you must make requests for this API operation to the Zonal endpoint. These endpoints support virtual-hosted-style requests in the format https://bucket_name.s3express-az_id.region.amazonaws.com/key-name . Path-style requests are not supported. For more information, see Regional and Zonal endpoints in the Amazon S3 User Guide.   Permissions     General purpose bucket permissions - To use GetObjectAttributes, you must have READ access to the object. The permissions that you need to use this operation with depend on whether the bucket is versioned. If the bucket is versioned, you need both the s3:GetObjectVersion and s3:GetObjectVersionAttributes permissions for this operation. If the bucket is not versioned, you need the s3:GetObject and s3:GetObjectAttributes permissions. For more information, see Specifying Permissions in a Policy in the Amazon S3 User Guide. If the object that you request does not exist, the error Amazon S3 returns depends on whether you also have the s3:ListBucket permission.   If you have the s3:ListBucket permission on the bucket, Amazon S3 returns an HTTP status code 404 Not Found ("no such key") error.   If you don't have the s3:ListBucket permission, Amazon S3 returns an HTTP status code 403 Forbidden ("access denied") error.      Directory bucket permissions - To grant access to this API operation on a directory bucket, we recommend that you use the  CreateSession  API operation for session-based authorization. Specifically, you grant the s3express:CreateSession permission to the directory bucket in a bucket policy or an IAM identity-based policy. Then, you make the CreateSession API call on the bucket to obtain a session token. With the session token in your request header, you can make API requests to this operation. After the session token expires, you make another CreateSession API call to generate a new session token for use. Amazon Web Services CLI or SDKs create session and refresh the session token automatically to avoid service interruptions when a session expires. For more information about authorization, see  CreateSession .    Encryption   Encryption request headers, like x-amz-server-side-encryption, should not be sent for HEAD requests if your object uses server-side encryption with Key Management Service (KMS) keys (SSE-KMS), dual-layer server-side encryption with Amazon Web Services KMS keys (DSSE-KMS), or server-side encryption with Amazon S3 managed encryption keys (SSE-S3). The x-amz-server-side-encryption header is used when you PUT an object to S3 and want to specify the encryption method. If you include this header in a GET request for an object that uses these types of keys, you’ll get an HTTP 400 Bad Request error. It's because the encryption method can't be changed when you retrieve the object.  If you encrypt an object by using server-side encryption with customer-provided encryption keys (SSE-C) when you store the object in Amazon S3, then when you retrieve the metadata from the object, you must use the following headers to provide the encryption key for the server to be able to retrieve the object's metadata. The headers are:     x-amz-server-side-encryption-customer-algorithm     x-amz-server-side-encryption-customer-key     x-amz-server-side-encryption-customer-key-MD5    For more information about SSE-C, see Server-Side Encryption (Using Customer-Provided Encryption Keys) in the Amazon S3 User Guide.   Directory bucket permissions - For directory buckets, only server-side encryption with Amazon S3 managed keys (SSE-S3) (AES256) is supported.   Versioning   Directory buckets - S3 Versioning isn't enabled and supported for directory buckets. For this API operation, only the null value of the version ID is supported by directory buckets. You can only specify null to the versionId query parameter in the request.  Conditional request headers  Consider the following when using request headers:   If both of the If-Match and If-Unmodified-Since headers are present in the request as follows, then Amazon S3 returns the HTTP status code 200 OK and the data requested:    If-Match condition evaluates to true.    If-Unmodified-Since condition evaluates to false.   For more information about conditional requests, see RFC 7232.   If both of the If-None-Match and If-Modified-Since headers are present in the request as follows, then Amazon S3 returns the HTTP status code 304 Not Modified:    If-None-Match condition evaluates to false.    If-Modified-Since condition evaluates to true.   For more information about conditional requests, see RFC 7232.    HTTP Host header syntax   Directory buckets  - The HTTP Host header syntax is  Bucket_name.s3express-az_id.region.amazonaws.com.   The following actions are related to GetObjectAttributes:    GetObject     GetObjectAcl     GetObjectLegalHold     GetObjectLockConfiguration     GetObjectRetention     GetObjectTagging     HeadObject     ListParts   
+   * Retrieves all the metadata from an object without returning the object itself. This operation is useful if you're interested only in an object's metadata.   GetObjectAttributes combines the functionality of HeadObject and ListParts. All of the data returned with each of those individual calls can be returned with a single call to GetObjectAttributes.   Directory buckets - For directory buckets, you must make requests for this API operation to the Zonal endpoint. These endpoints support virtual-hosted-style requests in the format https://bucket_name.s3express-az_id.region.amazonaws.com/key-name . Path-style requests are not supported. For more information, see Regional and Zonal endpoints in the Amazon S3 User Guide.   Permissions     General purpose bucket permissions - To use GetObjectAttributes, you must have READ access to the object. The permissions that you need to use this operation depend on whether the bucket is versioned. If the bucket is versioned, you need both the s3:GetObjectVersion and s3:GetObjectVersionAttributes permissions for this operation. If the bucket is not versioned, you need the s3:GetObject and s3:GetObjectAttributes permissions. For more information, see Specifying Permissions in a Policy in the Amazon S3 User Guide. If the object that you request does not exist, the error Amazon S3 returns depends on whether you also have the s3:ListBucket permission.   If you have the s3:ListBucket permission on the bucket, Amazon S3 returns an HTTP status code 404 Not Found ("no such key") error.   If you don't have the s3:ListBucket permission, Amazon S3 returns an HTTP status code 403 Forbidden ("access denied") error.      Directory bucket permissions - To grant access to this API operation on a directory bucket, we recommend that you use the  CreateSession  API operation for session-based authorization. Specifically, you grant the s3express:CreateSession permission to the directory bucket in a bucket policy or an IAM identity-based policy. Then, you make the CreateSession API call on the bucket to obtain a session token. With the session token in your request header, you can make API requests to this operation. After the session token expires, you make another CreateSession API call to generate a new session token for use. Amazon Web Services CLI or SDKs create session and refresh the session token automatically to avoid service interruptions when a session expires. For more information about authorization, see  CreateSession . If the object is encrypted with SSE-KMS, you must also have the kms:GenerateDataKey and kms:Decrypt permissions in IAM identity-based policies and KMS key policies for the KMS key.    Encryption   Encryption request headers, like x-amz-server-side-encryption, should not be sent for HEAD requests if your object uses server-side encryption with Key Management Service (KMS) keys (SSE-KMS), dual-layer server-side encryption with Amazon Web Services KMS keys (DSSE-KMS), or server-side encryption with Amazon S3 managed encryption keys (SSE-S3). The x-amz-server-side-encryption header is used when you PUT an object to S3 and want to specify the encryption method. If you include this header in a GET request for an object that uses these types of keys, you’ll get an HTTP 400 Bad Request error. It's because the encryption method can't be changed when you retrieve the object.  If you encrypt an object by using server-side encryption with customer-provided encryption keys (SSE-C) when you store the object in Amazon S3, then when you retrieve the metadata from the object, you must use the following headers to provide the encryption key for the server to be able to retrieve the object's metadata. The headers are:     x-amz-server-side-encryption-customer-algorithm     x-amz-server-side-encryption-customer-key     x-amz-server-side-encryption-customer-key-MD5    For more information about SSE-C, see Server-Side Encryption (Using Customer-Provided Encryption Keys) in the Amazon S3 User Guide.   Directory bucket permissions - For directory buckets, there are only two supported options for server-side encryption: server-side encryption with Amazon S3 managed keys (SSE-S3) (AES256) and server-side encryption with KMS keys (SSE-KMS) (aws:kms). We recommend that the bucket's default encryption uses the desired encryption configuration and you don't override the bucket default encryption in your CreateSession requests or PUT object requests. Then, new objects are automatically encrypted with the desired encryption settings. For more information, see Protecting data with server-side encryption in the Amazon S3 User Guide. For more information about the encryption overriding behaviors in directory buckets, see Specifying server-side encryption with KMS for new object uploads.   Versioning   Directory buckets - S3 Versioning isn't enabled and supported for directory buckets. For this API operation, only the null value of the version ID is supported by directory buckets. You can only specify null to the versionId query parameter in the request.  Conditional request headers  Consider the following when using request headers:   If both of the If-Match and If-Unmodified-Since headers are present in the request as follows, then Amazon S3 returns the HTTP status code 200 OK and the data requested:    If-Match condition evaluates to true.    If-Unmodified-Since condition evaluates to false.   For more information about conditional requests, see RFC 7232.   If both of the If-None-Match and If-Modified-Since headers are present in the request as follows, then Amazon S3 returns the HTTP status code 304 Not Modified:    If-None-Match condition evaluates to false.    If-Modified-Since condition evaluates to true.   For more information about conditional requests, see RFC 7232.    HTTP Host header syntax   Directory buckets  - The HTTP Host header syntax is  Bucket_name.s3express-az_id.region.amazonaws.com.   The following actions are related to GetObjectAttributes:    GetObject     GetObjectAcl     GetObjectLegalHold     GetObjectLockConfiguration     GetObjectRetention     GetObjectTagging     HeadObject     ListParts   
    */
   getObjectAttributes(params: S3.Types.GetObjectAttributesRequest, callback?: (err: AWSError, data: S3.Types.GetObjectAttributesOutput) => void): Request<S3.Types.GetObjectAttributesOutput, AWSError>;
   /**
-   * Retrieves all the metadata from an object without returning the object itself. This operation is useful if you're interested only in an object's metadata.   GetObjectAttributes combines the functionality of HeadObject and ListParts. All of the data returned with each of those individual calls can be returned with a single call to GetObjectAttributes.   Directory buckets - For directory buckets, you must make requests for this API operation to the Zonal endpoint. These endpoints support virtual-hosted-style requests in the format https://bucket_name.s3express-az_id.region.amazonaws.com/key-name . Path-style requests are not supported. For more information, see Regional and Zonal endpoints in the Amazon S3 User Guide.   Permissions     General purpose bucket permissions - To use GetObjectAttributes, you must have READ access to the object. The permissions that you need to use this operation with depend on whether the bucket is versioned. If the bucket is versioned, you need both the s3:GetObjectVersion and s3:GetObjectVersionAttributes permissions for this operation. If the bucket is not versioned, you need the s3:GetObject and s3:GetObjectAttributes permissions. For more information, see Specifying Permissions in a Policy in the Amazon S3 User Guide. If the object that you request does not exist, the error Amazon S3 returns depends on whether you also have the s3:ListBucket permission.   If you have the s3:ListBucket permission on the bucket, Amazon S3 returns an HTTP status code 404 Not Found ("no such key") error.   If you don't have the s3:ListBucket permission, Amazon S3 returns an HTTP status code 403 Forbidden ("access denied") error.      Directory bucket permissions - To grant access to this API operation on a directory bucket, we recommend that you use the  CreateSession  API operation for session-based authorization. Specifically, you grant the s3express:CreateSession permission to the directory bucket in a bucket policy or an IAM identity-based policy. Then, you make the CreateSession API call on the bucket to obtain a session token. With the session token in your request header, you can make API requests to this operation. After the session token expires, you make another CreateSession API call to generate a new session token for use. Amazon Web Services CLI or SDKs create session and refresh the session token automatically to avoid service interruptions when a session expires. For more information about authorization, see  CreateSession .    Encryption   Encryption request headers, like x-amz-server-side-encryption, should not be sent for HEAD requests if your object uses server-side encryption with Key Management Service (KMS) keys (SSE-KMS), dual-layer server-side encryption with Amazon Web Services KMS keys (DSSE-KMS), or server-side encryption with Amazon S3 managed encryption keys (SSE-S3). The x-amz-server-side-encryption header is used when you PUT an object to S3 and want to specify the encryption method. If you include this header in a GET request for an object that uses these types of keys, you’ll get an HTTP 400 Bad Request error. It's because the encryption method can't be changed when you retrieve the object.  If you encrypt an object by using server-side encryption with customer-provided encryption keys (SSE-C) when you store the object in Amazon S3, then when you retrieve the metadata from the object, you must use the following headers to provide the encryption key for the server to be able to retrieve the object's metadata. The headers are:     x-amz-server-side-encryption-customer-algorithm     x-amz-server-side-encryption-customer-key     x-amz-server-side-encryption-customer-key-MD5    For more information about SSE-C, see Server-Side Encryption (Using Customer-Provided Encryption Keys) in the Amazon S3 User Guide.   Directory bucket permissions - For directory buckets, only server-side encryption with Amazon S3 managed keys (SSE-S3) (AES256) is supported.   Versioning   Directory buckets - S3 Versioning isn't enabled and supported for directory buckets. For this API operation, only the null value of the version ID is supported by directory buckets. You can only specify null to the versionId query parameter in the request.  Conditional request headers  Consider the following when using request headers:   If both of the If-Match and If-Unmodified-Since headers are present in the request as follows, then Amazon S3 returns the HTTP status code 200 OK and the data requested:    If-Match condition evaluates to true.    If-Unmodified-Since condition evaluates to false.   For more information about conditional requests, see RFC 7232.   If both of the If-None-Match and If-Modified-Since headers are present in the request as follows, then Amazon S3 returns the HTTP status code 304 Not Modified:    If-None-Match condition evaluates to false.    If-Modified-Since condition evaluates to true.   For more information about conditional requests, see RFC 7232.    HTTP Host header syntax   Directory buckets  - The HTTP Host header syntax is  Bucket_name.s3express-az_id.region.amazonaws.com.   The following actions are related to GetObjectAttributes:    GetObject     GetObjectAcl     GetObjectLegalHold     GetObjectLockConfiguration     GetObjectRetention     GetObjectTagging     HeadObject     ListParts   
+   * Retrieves all the metadata from an object without returning the object itself. This operation is useful if you're interested only in an object's metadata.   GetObjectAttributes combines the functionality of HeadObject and ListParts. All of the data returned with each of those individual calls can be returned with a single call to GetObjectAttributes.   Directory buckets - For directory buckets, you must make requests for this API operation to the Zonal endpoint. These endpoints support virtual-hosted-style requests in the format https://bucket_name.s3express-az_id.region.amazonaws.com/key-name . Path-style requests are not supported. For more information, see Regional and Zonal endpoints in the Amazon S3 User Guide.   Permissions     General purpose bucket permissions - To use GetObjectAttributes, you must have READ access to the object. The permissions that you need to use this operation depend on whether the bucket is versioned. If the bucket is versioned, you need both the s3:GetObjectVersion and s3:GetObjectVersionAttributes permissions for this operation. If the bucket is not versioned, you need the s3:GetObject and s3:GetObjectAttributes permissions. For more information, see Specifying Permissions in a Policy in the Amazon S3 User Guide. If the object that you request does not exist, the error Amazon S3 returns depends on whether you also have the s3:ListBucket permission.   If you have the s3:ListBucket permission on the bucket, Amazon S3 returns an HTTP status code 404 Not Found ("no such key") error.   If you don't have the s3:ListBucket permission, Amazon S3 returns an HTTP status code 403 Forbidden ("access denied") error.      Directory bucket permissions - To grant access to this API operation on a directory bucket, we recommend that you use the  CreateSession  API operation for session-based authorization. Specifically, you grant the s3express:CreateSession permission to the directory bucket in a bucket policy or an IAM identity-based policy. Then, you make the CreateSession API call on the bucket to obtain a session token. With the session token in your request header, you can make API requests to this operation. After the session token expires, you make another CreateSession API call to generate a new session token for use. Amazon Web Services CLI or SDKs create session and refresh the session token automatically to avoid service interruptions when a session expires. For more information about authorization, see  CreateSession . If the object is encrypted with SSE-KMS, you must also have the kms:GenerateDataKey and kms:Decrypt permissions in IAM identity-based policies and KMS key policies for the KMS key.    Encryption   Encryption request headers, like x-amz-server-side-encryption, should not be sent for HEAD requests if your object uses server-side encryption with Key Management Service (KMS) keys (SSE-KMS), dual-layer server-side encryption with Amazon Web Services KMS keys (DSSE-KMS), or server-side encryption with Amazon S3 managed encryption keys (SSE-S3). The x-amz-server-side-encryption header is used when you PUT an object to S3 and want to specify the encryption method. If you include this header in a GET request for an object that uses these types of keys, you’ll get an HTTP 400 Bad Request error. It's because the encryption method can't be changed when you retrieve the object.  If you encrypt an object by using server-side encryption with customer-provided encryption keys (SSE-C) when you store the object in Amazon S3, then when you retrieve the metadata from the object, you must use the following headers to provide the encryption key for the server to be able to retrieve the object's metadata. The headers are:     x-amz-server-side-encryption-customer-algorithm     x-amz-server-side-encryption-customer-key     x-amz-server-side-encryption-customer-key-MD5    For more information about SSE-C, see Server-Side Encryption (Using Customer-Provided Encryption Keys) in the Amazon S3 User Guide.   Directory bucket permissions - For directory buckets, there are only two supported options for server-side encryption: server-side encryption with Amazon S3 managed keys (SSE-S3) (AES256) and server-side encryption with KMS keys (SSE-KMS) (aws:kms). We recommend that the bucket's default encryption uses the desired encryption configuration and you don't override the bucket default encryption in your CreateSession requests or PUT object requests. Then, new objects are automatically encrypted with the desired encryption settings. For more information, see Protecting data with server-side encryption in the Amazon S3 User Guide. For more information about the encryption overriding behaviors in directory buckets, see Specifying server-side encryption with KMS for new object uploads.   Versioning   Directory buckets - S3 Versioning isn't enabled and supported for directory buckets. For this API operation, only the null value of the version ID is supported by directory buckets. You can only specify null to the versionId query parameter in the request.  Conditional request headers  Consider the following when using request headers:   If both of the If-Match and If-Unmodified-Since headers are present in the request as follows, then Amazon S3 returns the HTTP status code 200 OK and the data requested:    If-Match condition evaluates to true.    If-Unmodified-Since condition evaluates to false.   For more information about conditional requests, see RFC 7232.   If both of the If-None-Match and If-Modified-Since headers are present in the request as follows, then Amazon S3 returns the HTTP status code 304 Not Modified:    If-None-Match condition evaluates to false.    If-Modified-Since condition evaluates to true.   For more information about conditional requests, see RFC 7232.    HTTP Host header syntax   Directory buckets  - The HTTP Host header syntax is  Bucket_name.s3express-az_id.region.amazonaws.com.   The following actions are related to GetObjectAttributes:    GetObject     GetObjectAcl     GetObjectLegalHold     GetObjectLockConfiguration     GetObjectRetention     GetObjectTagging     HeadObject     ListParts   
    */
   getObjectAttributes(callback?: (err: AWSError, data: S3.Types.GetObjectAttributesOutput) => void): Request<S3.Types.GetObjectAttributesOutput, AWSError>;
   /**
@@ -458,11 +458,11 @@ declare class S3 extends S3Customizations {
    */
   headBucket(callback?: (err: AWSError, data: S3.Types.HeadBucketOutput) => void): Request<S3.Types.HeadBucketOutput, AWSError>;
   /**
-   * The HEAD operation retrieves metadata from an object without returning the object itself. This operation is useful if you're interested only in an object's metadata.  A HEAD request has the same options as a GET operation on an object. The response is identical to the GET response except that there is no response body. Because of this, if the HEAD request generates an error, it returns a generic code, such as 400 Bad Request, 403 Forbidden, 404 Not Found, 405 Method Not Allowed, 412 Precondition Failed, or 304 Not Modified. It's not possible to retrieve the exact exception of these error codes.  Request headers are limited to 8 KB in size. For more information, see Common Request Headers.  Permissions      General purpose bucket permissions - To use HEAD, you must have the s3:GetObject permission. You need the relevant read object (or version) permission for this operation. For more information, see Actions, resources, and condition keys for Amazon S3 in the Amazon S3 User Guide. If the object you request doesn't exist, the error that Amazon S3 returns depends on whether you also have the s3:ListBucket permission.   If you have the s3:ListBucket permission on the bucket, Amazon S3 returns an HTTP status code 404 Not Found error.   If you don’t have the s3:ListBucket permission, Amazon S3 returns an HTTP status code 403 Forbidden error.      Directory bucket permissions - To grant access to this API operation on a directory bucket, we recommend that you use the  CreateSession  API operation for session-based authorization. Specifically, you grant the s3express:CreateSession permission to the directory bucket in a bucket policy or an IAM identity-based policy. Then, you make the CreateSession API call on the bucket to obtain a session token. With the session token in your request header, you can make API requests to this operation. After the session token expires, you make another CreateSession API call to generate a new session token for use. Amazon Web Services CLI or SDKs create session and refresh the session token automatically to avoid service interruptions when a session expires. For more information about authorization, see  CreateSession .    Encryption   Encryption request headers, like x-amz-server-side-encryption, should not be sent for HEAD requests if your object uses server-side encryption with Key Management Service (KMS) keys (SSE-KMS), dual-layer server-side encryption with Amazon Web Services KMS keys (DSSE-KMS), or server-side encryption with Amazon S3 managed encryption keys (SSE-S3). The x-amz-server-side-encryption header is used when you PUT an object to S3 and want to specify the encryption method. If you include this header in a HEAD request for an object that uses these types of keys, you’ll get an HTTP 400 Bad Request error. It's because the encryption method can't be changed when you retrieve the object.  If you encrypt an object by using server-side encryption with customer-provided encryption keys (SSE-C) when you store the object in Amazon S3, then when you retrieve the metadata from the object, you must use the following headers to provide the encryption key for the server to be able to retrieve the object's metadata. The headers are:     x-amz-server-side-encryption-customer-algorithm     x-amz-server-side-encryption-customer-key     x-amz-server-side-encryption-customer-key-MD5    For more information about SSE-C, see Server-Side Encryption (Using Customer-Provided Encryption Keys) in the Amazon S3 User Guide.   Directory bucket permissions - For directory buckets, only server-side encryption with Amazon S3 managed keys (SSE-S3) (AES256) is supported.   Versioning    If the current version of the object is a delete marker, Amazon S3 behaves as if the object was deleted and includes x-amz-delete-marker: true in the response.   If the specified version is a delete marker, the response returns a 405 Method Not Allowed error and the Last-Modified: timestamp response header.       Directory buckets - Delete marker is not supported by directory buckets.    Directory buckets - S3 Versioning isn't enabled and supported for directory buckets. For this API operation, only the null value of the version ID is supported by directory buckets. You can only specify null to the versionId query parameter in the request.     HTTP Host header syntax   Directory buckets  - The HTTP Host header syntax is  Bucket_name.s3express-az_id.region.amazonaws.com.  For directory buckets, you must make requests for this API operation to the Zonal endpoint. These endpoints support virtual-hosted-style requests in the format https://bucket_name.s3express-az_id.region.amazonaws.com/key-name . Path-style requests are not supported. For more information, see Regional and Zonal endpoints in the Amazon S3 User Guide.    The following actions are related to HeadObject:    GetObject     GetObjectAttributes   
+   * The HEAD operation retrieves metadata from an object without returning the object itself. This operation is useful if you're interested only in an object's metadata.  A HEAD request has the same options as a GET operation on an object. The response is identical to the GET response except that there is no response body. Because of this, if the HEAD request generates an error, it returns a generic code, such as 400 Bad Request, 403 Forbidden, 404 Not Found, 405 Method Not Allowed, 412 Precondition Failed, or 304 Not Modified. It's not possible to retrieve the exact exception of these error codes.  Request headers are limited to 8 KB in size. For more information, see Common Request Headers.  Permissions      General purpose bucket permissions - To use HEAD, you must have the s3:GetObject permission. You need the relevant read object (or version) permission for this operation. For more information, see Actions, resources, and condition keys for Amazon S3 in the Amazon S3 User Guide. For more information about the permissions to S3 API operations by S3 resource types, see Required permissions for Amazon S3 API operations in the Amazon S3 User Guide. If the object you request doesn't exist, the error that Amazon S3 returns depends on whether you also have the s3:ListBucket permission.   If you have the s3:ListBucket permission on the bucket, Amazon S3 returns an HTTP status code 404 Not Found error.   If you don’t have the s3:ListBucket permission, Amazon S3 returns an HTTP status code 403 Forbidden error.      Directory bucket permissions - To grant access to this API operation on a directory bucket, we recommend that you use the  CreateSession  API operation for session-based authorization. Specifically, you grant the s3express:CreateSession permission to the directory bucket in a bucket policy or an IAM identity-based policy. Then, you make the CreateSession API call on the bucket to obtain a session token. With the session token in your request header, you can make API requests to this operation. After the session token expires, you make another CreateSession API call to generate a new session token for use. Amazon Web Services CLI or SDKs create session and refresh the session token automatically to avoid service interruptions when a session expires. For more information about authorization, see  CreateSession . If you enable x-amz-checksum-mode in the request and the object is encrypted with Amazon Web Services Key Management Service (Amazon Web Services KMS), you must also have the kms:GenerateDataKey and kms:Decrypt permissions in IAM identity-based policies and KMS key policies for the KMS key to retrieve the checksum of the object.    Encryption   Encryption request headers, like x-amz-server-side-encryption, should not be sent for HEAD requests if your object uses server-side encryption with Key Management Service (KMS) keys (SSE-KMS), dual-layer server-side encryption with Amazon Web Services KMS keys (DSSE-KMS), or server-side encryption with Amazon S3 managed encryption keys (SSE-S3). The x-amz-server-side-encryption header is used when you PUT an object to S3 and want to specify the encryption method. If you include this header in a HEAD request for an object that uses these types of keys, you’ll get an HTTP 400 Bad Request error. It's because the encryption method can't be changed when you retrieve the object.  If you encrypt an object by using server-side encryption with customer-provided encryption keys (SSE-C) when you store the object in Amazon S3, then when you retrieve the metadata from the object, you must use the following headers to provide the encryption key for the server to be able to retrieve the object's metadata. The headers are:     x-amz-server-side-encryption-customer-algorithm     x-amz-server-side-encryption-customer-key     x-amz-server-side-encryption-customer-key-MD5    For more information about SSE-C, see Server-Side Encryption (Using Customer-Provided Encryption Keys) in the Amazon S3 User Guide.   Directory bucket  - For directory buckets, there are only two supported options for server-side encryption: SSE-S3 and SSE-KMS. SSE-C isn't supported. For more information, see Protecting data with server-side encryption in the Amazon S3 User Guide.    Versioning    If the current version of the object is a delete marker, Amazon S3 behaves as if the object was deleted and includes x-amz-delete-marker: true in the response.   If the specified version is a delete marker, the response returns a 405 Method Not Allowed error and the Last-Modified: timestamp response header.       Directory buckets - Delete marker is not supported by directory buckets.    Directory buckets - S3 Versioning isn't enabled and supported for directory buckets. For this API operation, only the null value of the version ID is supported by directory buckets. You can only specify null to the versionId query parameter in the request.     HTTP Host header syntax   Directory buckets  - The HTTP Host header syntax is  Bucket_name.s3express-az_id.region.amazonaws.com.  For directory buckets, you must make requests for this API operation to the Zonal endpoint. These endpoints support virtual-hosted-style requests in the format https://bucket_name.s3express-az_id.region.amazonaws.com/key-name . Path-style requests are not supported. For more information, see Regional and Zonal endpoints in the Amazon S3 User Guide.    The following actions are related to HeadObject:    GetObject     GetObjectAttributes   
    */
   headObject(params: S3.Types.HeadObjectRequest, callback?: (err: AWSError, data: S3.Types.HeadObjectOutput) => void): Request<S3.Types.HeadObjectOutput, AWSError>;
   /**
-   * The HEAD operation retrieves metadata from an object without returning the object itself. This operation is useful if you're interested only in an object's metadata.  A HEAD request has the same options as a GET operation on an object. The response is identical to the GET response except that there is no response body. Because of this, if the HEAD request generates an error, it returns a generic code, such as 400 Bad Request, 403 Forbidden, 404 Not Found, 405 Method Not Allowed, 412 Precondition Failed, or 304 Not Modified. It's not possible to retrieve the exact exception of these error codes.  Request headers are limited to 8 KB in size. For more information, see Common Request Headers.  Permissions      General purpose bucket permissions - To use HEAD, you must have the s3:GetObject permission. You need the relevant read object (or version) permission for this operation. For more information, see Actions, resources, and condition keys for Amazon S3 in the Amazon S3 User Guide. If the object you request doesn't exist, the error that Amazon S3 returns depends on whether you also have the s3:ListBucket permission.   If you have the s3:ListBucket permission on the bucket, Amazon S3 returns an HTTP status code 404 Not Found error.   If you don’t have the s3:ListBucket permission, Amazon S3 returns an HTTP status code 403 Forbidden error.      Directory bucket permissions - To grant access to this API operation on a directory bucket, we recommend that you use the  CreateSession  API operation for session-based authorization. Specifically, you grant the s3express:CreateSession permission to the directory bucket in a bucket policy or an IAM identity-based policy. Then, you make the CreateSession API call on the bucket to obtain a session token. With the session token in your request header, you can make API requests to this operation. After the session token expires, you make another CreateSession API call to generate a new session token for use. Amazon Web Services CLI or SDKs create session and refresh the session token automatically to avoid service interruptions when a session expires. For more information about authorization, see  CreateSession .    Encryption   Encryption request headers, like x-amz-server-side-encryption, should not be sent for HEAD requests if your object uses server-side encryption with Key Management Service (KMS) keys (SSE-KMS), dual-layer server-side encryption with Amazon Web Services KMS keys (DSSE-KMS), or server-side encryption with Amazon S3 managed encryption keys (SSE-S3). The x-amz-server-side-encryption header is used when you PUT an object to S3 and want to specify the encryption method. If you include this header in a HEAD request for an object that uses these types of keys, you’ll get an HTTP 400 Bad Request error. It's because the encryption method can't be changed when you retrieve the object.  If you encrypt an object by using server-side encryption with customer-provided encryption keys (SSE-C) when you store the object in Amazon S3, then when you retrieve the metadata from the object, you must use the following headers to provide the encryption key for the server to be able to retrieve the object's metadata. The headers are:     x-amz-server-side-encryption-customer-algorithm     x-amz-server-side-encryption-customer-key     x-amz-server-side-encryption-customer-key-MD5    For more information about SSE-C, see Server-Side Encryption (Using Customer-Provided Encryption Keys) in the Amazon S3 User Guide.   Directory bucket permissions - For directory buckets, only server-side encryption with Amazon S3 managed keys (SSE-S3) (AES256) is supported.   Versioning    If the current version of the object is a delete marker, Amazon S3 behaves as if the object was deleted and includes x-amz-delete-marker: true in the response.   If the specified version is a delete marker, the response returns a 405 Method Not Allowed error and the Last-Modified: timestamp response header.       Directory buckets - Delete marker is not supported by directory buckets.    Directory buckets - S3 Versioning isn't enabled and supported for directory buckets. For this API operation, only the null value of the version ID is supported by directory buckets. You can only specify null to the versionId query parameter in the request.     HTTP Host header syntax   Directory buckets  - The HTTP Host header syntax is  Bucket_name.s3express-az_id.region.amazonaws.com.  For directory buckets, you must make requests for this API operation to the Zonal endpoint. These endpoints support virtual-hosted-style requests in the format https://bucket_name.s3express-az_id.region.amazonaws.com/key-name . Path-style requests are not supported. For more information, see Regional and Zonal endpoints in the Amazon S3 User Guide.    The following actions are related to HeadObject:    GetObject     GetObjectAttributes   
+   * The HEAD operation retrieves metadata from an object without returning the object itself. This operation is useful if you're interested only in an object's metadata.  A HEAD request has the same options as a GET operation on an object. The response is identical to the GET response except that there is no response body. Because of this, if the HEAD request generates an error, it returns a generic code, such as 400 Bad Request, 403 Forbidden, 404 Not Found, 405 Method Not Allowed, 412 Precondition Failed, or 304 Not Modified. It's not possible to retrieve the exact exception of these error codes.  Request headers are limited to 8 KB in size. For more information, see Common Request Headers.  Permissions      General purpose bucket permissions - To use HEAD, you must have the s3:GetObject permission. You need the relevant read object (or version) permission for this operation. For more information, see Actions, resources, and condition keys for Amazon S3 in the Amazon S3 User Guide. For more information about the permissions to S3 API operations by S3 resource types, see Required permissions for Amazon S3 API operations in the Amazon S3 User Guide. If the object you request doesn't exist, the error that Amazon S3 returns depends on whether you also have the s3:ListBucket permission.   If you have the s3:ListBucket permission on the bucket, Amazon S3 returns an HTTP status code 404 Not Found error.   If you don’t have the s3:ListBucket permission, Amazon S3 returns an HTTP status code 403 Forbidden error.      Directory bucket permissions - To grant access to this API operation on a directory bucket, we recommend that you use the  CreateSession  API operation for session-based authorization. Specifically, you grant the s3express:CreateSession permission to the directory bucket in a bucket policy or an IAM identity-based policy. Then, you make the CreateSession API call on the bucket to obtain a session token. With the session token in your request header, you can make API requests to this operation. After the session token expires, you make another CreateSession API call to generate a new session token for use. Amazon Web Services CLI or SDKs create session and refresh the session token automatically to avoid service interruptions when a session expires. For more information about authorization, see  CreateSession . If you enable x-amz-checksum-mode in the request and the object is encrypted with Amazon Web Services Key Management Service (Amazon Web Services KMS), you must also have the kms:GenerateDataKey and kms:Decrypt permissions in IAM identity-based policies and KMS key policies for the KMS key to retrieve the checksum of the object.    Encryption   Encryption request headers, like x-amz-server-side-encryption, should not be sent for HEAD requests if your object uses server-side encryption with Key Management Service (KMS) keys (SSE-KMS), dual-layer server-side encryption with Amazon Web Services KMS keys (DSSE-KMS), or server-side encryption with Amazon S3 managed encryption keys (SSE-S3). The x-amz-server-side-encryption header is used when you PUT an object to S3 and want to specify the encryption method. If you include this header in a HEAD request for an object that uses these types of keys, you’ll get an HTTP 400 Bad Request error. It's because the encryption method can't be changed when you retrieve the object.  If you encrypt an object by using server-side encryption with customer-provided encryption keys (SSE-C) when you store the object in Amazon S3, then when you retrieve the metadata from the object, you must use the following headers to provide the encryption key for the server to be able to retrieve the object's metadata. The headers are:     x-amz-server-side-encryption-customer-algorithm     x-amz-server-side-encryption-customer-key     x-amz-server-side-encryption-customer-key-MD5    For more information about SSE-C, see Server-Side Encryption (Using Customer-Provided Encryption Keys) in the Amazon S3 User Guide.   Directory bucket  - For directory buckets, there are only two supported options for server-side encryption: SSE-S3 and SSE-KMS. SSE-C isn't supported. For more information, see Protecting data with server-side encryption in the Amazon S3 User Guide.    Versioning    If the current version of the object is a delete marker, Amazon S3 behaves as if the object was deleted and includes x-amz-delete-marker: true in the response.   If the specified version is a delete marker, the response returns a 405 Method Not Allowed error and the Last-Modified: timestamp response header.       Directory buckets - Delete marker is not supported by directory buckets.    Directory buckets - S3 Versioning isn't enabled and supported for directory buckets. For this API operation, only the null value of the version ID is supported by directory buckets. You can only specify null to the versionId query parameter in the request.     HTTP Host header syntax   Directory buckets  - The HTTP Host header syntax is  Bucket_name.s3express-az_id.region.amazonaws.com.  For directory buckets, you must make requests for this API operation to the Zonal endpoint. These endpoints support virtual-hosted-style requests in the format https://bucket_name.s3express-az_id.region.amazonaws.com/key-name . Path-style requests are not supported. For more information, see Regional and Zonal endpoints in the Amazon S3 User Guide.    The following actions are related to HeadObject:    GetObject     GetObjectAttributes   
    */
   headObject(callback?: (err: AWSError, data: S3.Types.HeadObjectOutput) => void): Request<S3.Types.HeadObjectOutput, AWSError>;
   /**
@@ -586,11 +586,11 @@ declare class S3 extends S3Customizations {
    */
   putBucketCors(callback?: (err: AWSError, data: {}) => void): Request<{}, AWSError>;
   /**
-   *  This operation is not supported by directory buckets.  This action uses the encryption subresource to configure default encryption and Amazon S3 Bucket Keys for an existing bucket. By default, all buckets have a default encryption configuration that uses server-side encryption with Amazon S3 managed keys (SSE-S3). You can optionally configure default encryption for a bucket by using server-side encryption with Key Management Service (KMS) keys (SSE-KMS) or dual-layer server-side encryption with Amazon Web Services KMS keys (DSSE-KMS). If you specify default encryption by using SSE-KMS, you can also configure Amazon S3 Bucket Keys. If you use PutBucketEncryption to set your default bucket encryption to SSE-KMS, you should verify that your KMS key ID is correct. Amazon S3 does not validate the KMS key ID provided in PutBucketEncryption requests.  If you're specifying a customer managed KMS key, we recommend using a fully qualified KMS key ARN. If you use a KMS key alias instead, then KMS resolves the key within the requester’s account. This behavior can result in data that's encrypted with a KMS key that belongs to the requester, and not the bucket owner. Also, this action requires Amazon Web Services Signature Version 4. For more information, see  Authenticating Requests (Amazon Web Services Signature Version 4).   To use this operation, you must have permission to perform the s3:PutEncryptionConfiguration action. The bucket owner has this permission by default. The bucket owner can grant this permission to others. For more information about permissions, see Permissions Related to Bucket Subresource Operations and Managing Access Permissions to Your Amazon S3 Resources in the Amazon S3 User Guide.  The following operations are related to PutBucketEncryption:    GetBucketEncryption     DeleteBucketEncryption   
+   * This operation configures default encryption and Amazon S3 Bucket Keys for an existing bucket.   Directory buckets  - For directory buckets, you must make requests for this API operation to the Regional endpoint. These endpoints support path-style requests in the format https://s3express-control.region_code.amazonaws.com/bucket-name . Virtual-hosted-style requests aren't supported. For more information, see Regional and Zonal endpoints in the Amazon S3 User Guide.  By default, all buckets have a default encryption configuration that uses server-side encryption with Amazon S3 managed keys (SSE-S3).     General purpose buckets    You can optionally configure default encryption for a bucket by using server-side encryption with Key Management Service (KMS) keys (SSE-KMS) or dual-layer server-side encryption with Amazon Web Services KMS keys (DSSE-KMS). If you specify default encryption by using SSE-KMS, you can also configure Amazon S3 Bucket Keys. For information about the bucket default encryption feature, see Amazon S3 Bucket Default Encryption in the Amazon S3 User Guide.    If you use PutBucketEncryption to set your default bucket encryption to SSE-KMS, you should verify that your KMS key ID is correct. Amazon S3 doesn't validate the KMS key ID provided in PutBucketEncryption requests.      Directory buckets  - You can optionally configure default encryption for a bucket by using server-side encryption with Key Management Service (KMS) keys (SSE-KMS).   We recommend that the bucket's default encryption uses the desired encryption configuration and you don't override the bucket default encryption in your CreateSession requests or PUT object requests. Then, new objects are automatically encrypted with the desired encryption settings. For more information about the encryption overriding behaviors in directory buckets, see Specifying server-side encryption with KMS for new object uploads.   Your SSE-KMS configuration can only support 1 customer managed key per directory bucket for the lifetime of the bucket. The Amazon Web Services managed key (aws/s3) isn't supported.    S3 Bucket Keys are always enabled for GET and PUT operations in a directory bucket and can’t be disabled. S3 Bucket Keys aren't supported, when you copy SSE-KMS encrypted objects from general purpose buckets to directory buckets, from directory buckets to general purpose buckets, or between directory buckets, through CopyObject, UploadPartCopy, the Copy operation in Batch Operations, or the import jobs. In this case, Amazon S3 makes a call to KMS every time a copy request is made for a KMS-encrypted object.   When you specify an KMS customer managed key for encryption in your directory bucket, only use the key ID or key ARN. The key alias format of the KMS key isn't supported.   For directory buckets, if you use PutBucketEncryption to set your default bucket encryption to SSE-KMS, Amazon S3 validates the KMS key ID provided in PutBucketEncryption requests.       If you're specifying a customer managed KMS key, we recommend using a fully qualified KMS key ARN. If you use a KMS key alias instead, then KMS resolves the key within the requester’s account. This behavior can result in data that's encrypted with a KMS key that belongs to the requester, and not the bucket owner. Also, this action requires Amazon Web Services Signature Version 4. For more information, see  Authenticating Requests (Amazon Web Services Signature Version 4).    Permissions     General purpose bucket permissions - The s3:PutEncryptionConfiguration permission is required in a policy. The bucket owner has this permission by default. The bucket owner can grant this permission to others. For more information about permissions, see Permissions Related to Bucket Operations and Managing Access Permissions to Your Amazon S3 Resources in the Amazon S3 User Guide.    Directory bucket permissions - To grant access to this API operation, you must have the s3express:PutEncryptionConfiguration permission in an IAM identity-based policy instead of a bucket policy. Cross-account access to this API operation isn't supported. This operation can only be performed by the Amazon Web Services account that owns the resource. For more information about directory bucket policies and permissions, see Amazon Web Services Identity and Access Management (IAM) for S3 Express One Zone in the Amazon S3 User Guide. To set a directory bucket default encryption with SSE-KMS, you must also have the kms:GenerateDataKey and the kms:Decrypt permissions in IAM identity-based policies and KMS key policies for the target KMS key.    HTTP Host header syntax   Directory buckets  - The HTTP Host header syntax is s3express-control.region.amazonaws.com.   The following operations are related to PutBucketEncryption:    GetBucketEncryption     DeleteBucketEncryption   
    */
   putBucketEncryption(params: S3.Types.PutBucketEncryptionRequest, callback?: (err: AWSError, data: {}) => void): Request<{}, AWSError>;
   /**
-   *  This operation is not supported by directory buckets.  This action uses the encryption subresource to configure default encryption and Amazon S3 Bucket Keys for an existing bucket. By default, all buckets have a default encryption configuration that uses server-side encryption with Amazon S3 managed keys (SSE-S3). You can optionally configure default encryption for a bucket by using server-side encryption with Key Management Service (KMS) keys (SSE-KMS) or dual-layer server-side encryption with Amazon Web Services KMS keys (DSSE-KMS). If you specify default encryption by using SSE-KMS, you can also configure Amazon S3 Bucket Keys. If you use PutBucketEncryption to set your default bucket encryption to SSE-KMS, you should verify that your KMS key ID is correct. Amazon S3 does not validate the KMS key ID provided in PutBucketEncryption requests.  If you're specifying a customer managed KMS key, we recommend using a fully qualified KMS key ARN. If you use a KMS key alias instead, then KMS resolves the key within the requester’s account. This behavior can result in data that's encrypted with a KMS key that belongs to the requester, and not the bucket owner. Also, this action requires Amazon Web Services Signature Version 4. For more information, see  Authenticating Requests (Amazon Web Services Signature Version 4).   To use this operation, you must have permission to perform the s3:PutEncryptionConfiguration action. The bucket owner has this permission by default. The bucket owner can grant this permission to others. For more information about permissions, see Permissions Related to Bucket Subresource Operations and Managing Access Permissions to Your Amazon S3 Resources in the Amazon S3 User Guide.  The following operations are related to PutBucketEncryption:    GetBucketEncryption     DeleteBucketEncryption   
+   * This operation configures default encryption and Amazon S3 Bucket Keys for an existing bucket.   Directory buckets  - For directory buckets, you must make requests for this API operation to the Regional endpoint. These endpoints support path-style requests in the format https://s3express-control.region_code.amazonaws.com/bucket-name . Virtual-hosted-style requests aren't supported. For more information, see Regional and Zonal endpoints in the Amazon S3 User Guide.  By default, all buckets have a default encryption configuration that uses server-side encryption with Amazon S3 managed keys (SSE-S3).     General purpose buckets    You can optionally configure default encryption for a bucket by using server-side encryption with Key Management Service (KMS) keys (SSE-KMS) or dual-layer server-side encryption with Amazon Web Services KMS keys (DSSE-KMS). If you specify default encryption by using SSE-KMS, you can also configure Amazon S3 Bucket Keys. For information about the bucket default encryption feature, see Amazon S3 Bucket Default Encryption in the Amazon S3 User Guide.    If you use PutBucketEncryption to set your default bucket encryption to SSE-KMS, you should verify that your KMS key ID is correct. Amazon S3 doesn't validate the KMS key ID provided in PutBucketEncryption requests.      Directory buckets  - You can optionally configure default encryption for a bucket by using server-side encryption with Key Management Service (KMS) keys (SSE-KMS).   We recommend that the bucket's default encryption uses the desired encryption configuration and you don't override the bucket default encryption in your CreateSession requests or PUT object requests. Then, new objects are automatically encrypted with the desired encryption settings. For more information about the encryption overriding behaviors in directory buckets, see Specifying server-side encryption with KMS for new object uploads.   Your SSE-KMS configuration can only support 1 customer managed key per directory bucket for the lifetime of the bucket. The Amazon Web Services managed key (aws/s3) isn't supported.    S3 Bucket Keys are always enabled for GET and PUT operations in a directory bucket and can’t be disabled. S3 Bucket Keys aren't supported, when you copy SSE-KMS encrypted objects from general purpose buckets to directory buckets, from directory buckets to general purpose buckets, or between directory buckets, through CopyObject, UploadPartCopy, the Copy operation in Batch Operations, or the import jobs. In this case, Amazon S3 makes a call to KMS every time a copy request is made for a KMS-encrypted object.   When you specify an KMS customer managed key for encryption in your directory bucket, only use the key ID or key ARN. The key alias format of the KMS key isn't supported.   For directory buckets, if you use PutBucketEncryption to set your default bucket encryption to SSE-KMS, Amazon S3 validates the KMS key ID provided in PutBucketEncryption requests.       If you're specifying a customer managed KMS key, we recommend using a fully qualified KMS key ARN. If you use a KMS key alias instead, then KMS resolves the key within the requester’s account. This behavior can result in data that's encrypted with a KMS key that belongs to the requester, and not the bucket owner. Also, this action requires Amazon Web Services Signature Version 4. For more information, see  Authenticating Requests (Amazon Web Services Signature Version 4).    Permissions     General purpose bucket permissions - The s3:PutEncryptionConfiguration permission is required in a policy. The bucket owner has this permission by default. The bucket owner can grant this permission to others. For more information about permissions, see Permissions Related to Bucket Operations and Managing Access Permissions to Your Amazon S3 Resources in the Amazon S3 User Guide.    Directory bucket permissions - To grant access to this API operation, you must have the s3express:PutEncryptionConfiguration permission in an IAM identity-based policy instead of a bucket policy. Cross-account access to this API operation isn't supported. This operation can only be performed by the Amazon Web Services account that owns the resource. For more information about directory bucket policies and permissions, see Amazon Web Services Identity and Access Management (IAM) for S3 Express One Zone in the Amazon S3 User Guide. To set a directory bucket default encryption with SSE-KMS, you must also have the kms:GenerateDataKey and the kms:Decrypt permissions in IAM identity-based policies and KMS key policies for the target KMS key.    HTTP Host header syntax   Directory buckets  - The HTTP Host header syntax is s3express-control.region.amazonaws.com.   The following operations are related to PutBucketEncryption:    GetBucketEncryption     DeleteBucketEncryption   
    */
   putBucketEncryption(callback?: (err: AWSError, data: {}) => void): Request<{}, AWSError>;
   /**
@@ -618,13 +618,13 @@ declare class S3 extends S3Customizations {
    */
   putBucketLifecycle(callback?: (err: AWSError, data: {}) => void): Request<{}, AWSError>;
   /**
-   *  This operation is not supported by directory buckets.  Creates a new lifecycle configuration for the bucket or replaces an existing lifecycle configuration. Keep in mind that this will overwrite an existing lifecycle configuration, so if you want to retain any configuration details, they must be included in the new lifecycle configuration. For information about lifecycle configuration, see Managing your storage lifecycle.  Bucket lifecycle configuration now supports specifying a lifecycle rule using an object key name prefix, one or more object tags, object size, or any combination of these. Accordingly, this section describes the latest API. The previous version of the API supported filtering based only on an object key name prefix, which is supported for backward compatibility. For the related API description, see PutBucketLifecycle.   Rules  You specify the lifecycle configuration in your request body. The lifecycle configuration is specified as XML consisting of one or more rules. An Amazon S3 Lifecycle configuration can have up to 1,000 rules. This limit is not adjustable. Each rule consists of the following:   A filter identifying a subset of objects to which the rule applies. The filter can be based on a key name prefix, object tags, object size, or any combination of these.   A status indicating whether the rule is in effect.   One or more lifecycle transition and expiration actions that you want Amazon S3 to perform on the objects identified by the filter. If the state of your bucket is versioning-enabled or versioning-suspended, you can have many versions of the same object (one current version and zero or more noncurrent versions). Amazon S3 provides predefined actions that you can specify for current and noncurrent object versions.   For more information, see Object Lifecycle Management and Lifecycle Configuration Elements.  Permissions  By default, all Amazon S3 resources are private, including buckets, objects, and related subresources (for example, lifecycle configuration and website configuration). Only the resource owner (that is, the Amazon Web Services account that created it) can access the resource. The resource owner can optionally grant access permissions to others by writing an access policy. For this operation, a user must get the s3:PutLifecycleConfiguration permission. You can also explicitly deny permissions. An explicit deny also supersedes any other permissions. If you want to block users or accounts from removing or deleting objects from your bucket, you must deny them permissions for the following actions:    s3:DeleteObject     s3:DeleteObjectVersion     s3:PutLifecycleConfiguration    For more information about permissions, see Managing Access Permissions to Your Amazon S3 Resources.   The following operations are related to PutBucketLifecycleConfiguration:    Examples of Lifecycle Configuration     GetBucketLifecycleConfiguration     DeleteBucketLifecycle   
+   *  This operation is not supported by directory buckets.  Creates a new lifecycle configuration for the bucket or replaces an existing lifecycle configuration. Keep in mind that this will overwrite an existing lifecycle configuration, so if you want to retain any configuration details, they must be included in the new lifecycle configuration. For information about lifecycle configuration, see Managing your storage lifecycle.  Rules  You specify the lifecycle configuration in your request body. The lifecycle configuration is specified as XML consisting of one or more rules. An Amazon S3 Lifecycle configuration can have up to 1,000 rules. This limit is not adjustable. Bucket lifecycle configuration supports specifying a lifecycle rule using an object key name prefix, one or more object tags, object size, or any combination of these. Accordingly, this section describes the latest API. The previous version of the API supported filtering based only on an object key name prefix, which is supported for backward compatibility. For the related API description, see PutBucketLifecycle. A lifecycle rule consists of the following:   A filter identifying a subset of objects to which the rule applies. The filter can be based on a key name prefix, object tags, object size, or any combination of these.   A status indicating whether the rule is in effect.   One or more lifecycle transition and expiration actions that you want Amazon S3 to perform on the objects identified by the filter. If the state of your bucket is versioning-enabled or versioning-suspended, you can have many versions of the same object (one current version and zero or more noncurrent versions). Amazon S3 provides predefined actions that you can specify for current and noncurrent object versions.   For more information, see Object Lifecycle Management and Lifecycle Configuration Elements.  Permissions  By default, all Amazon S3 resources are private, including buckets, objects, and related subresources (for example, lifecycle configuration and website configuration). Only the resource owner (that is, the Amazon Web Services account that created it) can access the resource. The resource owner can optionally grant access permissions to others by writing an access policy. For this operation, a user must get the s3:PutLifecycleConfiguration permission. You can also explicitly deny permissions. An explicit deny also supersedes any other permissions. If you want to block users or accounts from removing or deleting objects from your bucket, you must deny them permissions for the following actions:    s3:DeleteObject     s3:DeleteObjectVersion     s3:PutLifecycleConfiguration    For more information about permissions, see Managing Access Permissions to Your Amazon S3 Resources.   The following operations are related to PutBucketLifecycleConfiguration:    Examples of Lifecycle Configuration     GetBucketLifecycleConfiguration     DeleteBucketLifecycle   
    */
-  putBucketLifecycleConfiguration(params: S3.Types.PutBucketLifecycleConfigurationRequest, callback?: (err: AWSError, data: {}) => void): Request<{}, AWSError>;
+  putBucketLifecycleConfiguration(params: S3.Types.PutBucketLifecycleConfigurationRequest, callback?: (err: AWSError, data: S3.Types.PutBucketLifecycleConfigurationOutput) => void): Request<S3.Types.PutBucketLifecycleConfigurationOutput, AWSError>;
   /**
-   *  This operation is not supported by directory buckets.  Creates a new lifecycle configuration for the bucket or replaces an existing lifecycle configuration. Keep in mind that this will overwrite an existing lifecycle configuration, so if you want to retain any configuration details, they must be included in the new lifecycle configuration. For information about lifecycle configuration, see Managing your storage lifecycle.  Bucket lifecycle configuration now supports specifying a lifecycle rule using an object key name prefix, one or more object tags, object size, or any combination of these. Accordingly, this section describes the latest API. The previous version of the API supported filtering based only on an object key name prefix, which is supported for backward compatibility. For the related API description, see PutBucketLifecycle.   Rules  You specify the lifecycle configuration in your request body. The lifecycle configuration is specified as XML consisting of one or more rules. An Amazon S3 Lifecycle configuration can have up to 1,000 rules. This limit is not adjustable. Each rule consists of the following:   A filter identifying a subset of objects to which the rule applies. The filter can be based on a key name prefix, object tags, object size, or any combination of these.   A status indicating whether the rule is in effect.   One or more lifecycle transition and expiration actions that you want Amazon S3 to perform on the objects identified by the filter. If the state of your bucket is versioning-enabled or versioning-suspended, you can have many versions of the same object (one current version and zero or more noncurrent versions). Amazon S3 provides predefined actions that you can specify for current and noncurrent object versions.   For more information, see Object Lifecycle Management and Lifecycle Configuration Elements.  Permissions  By default, all Amazon S3 resources are private, including buckets, objects, and related subresources (for example, lifecycle configuration and website configuration). Only the resource owner (that is, the Amazon Web Services account that created it) can access the resource. The resource owner can optionally grant access permissions to others by writing an access policy. For this operation, a user must get the s3:PutLifecycleConfiguration permission. You can also explicitly deny permissions. An explicit deny also supersedes any other permissions. If you want to block users or accounts from removing or deleting objects from your bucket, you must deny them permissions for the following actions:    s3:DeleteObject     s3:DeleteObjectVersion     s3:PutLifecycleConfiguration    For more information about permissions, see Managing Access Permissions to Your Amazon S3 Resources.   The following operations are related to PutBucketLifecycleConfiguration:    Examples of Lifecycle Configuration     GetBucketLifecycleConfiguration     DeleteBucketLifecycle   
+   *  This operation is not supported by directory buckets.  Creates a new lifecycle configuration for the bucket or replaces an existing lifecycle configuration. Keep in mind that this will overwrite an existing lifecycle configuration, so if you want to retain any configuration details, they must be included in the new lifecycle configuration. For information about lifecycle configuration, see Managing your storage lifecycle.  Rules  You specify the lifecycle configuration in your request body. The lifecycle configuration is specified as XML consisting of one or more rules. An Amazon S3 Lifecycle configuration can have up to 1,000 rules. This limit is not adjustable. Bucket lifecycle configuration supports specifying a lifecycle rule using an object key name prefix, one or more object tags, object size, or any combination of these. Accordingly, this section describes the latest API. The previous version of the API supported filtering based only on an object key name prefix, which is supported for backward compatibility. For the related API description, see PutBucketLifecycle. A lifecycle rule consists of the following:   A filter identifying a subset of objects to which the rule applies. The filter can be based on a key name prefix, object tags, object size, or any combination of these.   A status indicating whether the rule is in effect.   One or more lifecycle transition and expiration actions that you want Amazon S3 to perform on the objects identified by the filter. If the state of your bucket is versioning-enabled or versioning-suspended, you can have many versions of the same object (one current version and zero or more noncurrent versions). Amazon S3 provides predefined actions that you can specify for current and noncurrent object versions.   For more information, see Object Lifecycle Management and Lifecycle Configuration Elements.  Permissions  By default, all Amazon S3 resources are private, including buckets, objects, and related subresources (for example, lifecycle configuration and website configuration). Only the resource owner (that is, the Amazon Web Services account that created it) can access the resource. The resource owner can optionally grant access permissions to others by writing an access policy. For this operation, a user must get the s3:PutLifecycleConfiguration permission. You can also explicitly deny permissions. An explicit deny also supersedes any other permissions. If you want to block users or accounts from removing or deleting objects from your bucket, you must deny them permissions for the following actions:    s3:DeleteObject     s3:DeleteObjectVersion     s3:PutLifecycleConfiguration    For more information about permissions, see Managing Access Permissions to Your Amazon S3 Resources.   The following operations are related to PutBucketLifecycleConfiguration:    Examples of Lifecycle Configuration     GetBucketLifecycleConfiguration     DeleteBucketLifecycle   
    */
-  putBucketLifecycleConfiguration(callback?: (err: AWSError, data: {}) => void): Request<{}, AWSError>;
+  putBucketLifecycleConfiguration(callback?: (err: AWSError, data: S3.Types.PutBucketLifecycleConfigurationOutput) => void): Request<S3.Types.PutBucketLifecycleConfigurationOutput, AWSError>;
   /**
    *  This operation is not supported by directory buckets.  Set the logging parameters for a bucket and to specify permissions for who can view and modify the logging parameters. All logs are saved to buckets in the same Amazon Web Services Region as the source bucket. To set the logging status of a bucket, you must be the bucket owner. The bucket owner is automatically granted FULL_CONTROL to all logs. You use the Grantee request element to grant access to other people. The Permissions request element specifies the kind of access the grantee has to the logs.  If the target bucket for log delivery uses the bucket owner enforced setting for S3 Object Ownership, you can't use the Grantee request element to grant access to others. Permissions can only be granted using policies. For more information, see Permissions for server access log delivery in the Amazon S3 User Guide.   Grantee Values  You can specify the person (grantee) to whom you're assigning access rights (by using request elements) in the following ways:   By the person's ID:  &lt;Grantee xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:type="CanonicalUser"&gt;&lt;ID&gt;&lt;&gt;ID&lt;&gt;&lt;/ID&gt;&lt;DisplayName&gt;&lt;&gt;GranteesEmail&lt;&gt;&lt;/DisplayName&gt; &lt;/Grantee&gt;   DisplayName is optional and ignored in the request.   By Email address:   &lt;Grantee xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:type="AmazonCustomerByEmail"&gt;&lt;EmailAddress&gt;&lt;&gt;Grantees@email.com&lt;&gt;&lt;/EmailAddress&gt;&lt;/Grantee&gt;  The grantee is resolved to the CanonicalUser and, in a response to a GETObjectAcl request, appears as the CanonicalUser.   By URI:  &lt;Grantee xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:type="Group"&gt;&lt;URI&gt;&lt;&gt;http://acs.amazonaws.com/groups/global/AuthenticatedUsers&lt;&gt;&lt;/URI&gt;&lt;/Grantee&gt;      To enable logging, you use LoggingEnabled and its children request elements. To disable logging, you use an empty BucketLoggingStatus request element:  &lt;BucketLoggingStatus xmlns="http://doc.s3.amazonaws.com/2006-03-01" /&gt;  For more information about server access logging, see Server Access Logging in the Amazon S3 User Guide.  For more information about creating a bucket, see CreateBucket. For more information about returning the logging status of a bucket, see GetBucketLogging. The following operations are related to PutBucketLogging:    PutObject     DeleteBucket     CreateBucket     GetBucketLogging   
    */
@@ -714,11 +714,11 @@ declare class S3 extends S3Customizations {
    */
   putBucketWebsite(callback?: (err: AWSError, data: {}) => void): Request<{}, AWSError>;
   /**
-   * Adds an object to a bucket.    Amazon S3 never adds partial objects; if you receive a success response, Amazon S3 added the entire object to the bucket. You cannot use PutObject to only update a single piece of metadata for an existing object. You must put the entire object with updated metadata if you want to update some values.   If your bucket uses the bucket owner enforced setting for Object Ownership, ACLs are disabled and no longer affect permissions. All objects written to the bucket by any account will be owned by the bucket owner.    Directory buckets - For directory buckets, you must make requests for this API operation to the Zonal endpoint. These endpoints support virtual-hosted-style requests in the format https://bucket_name.s3express-az_id.region.amazonaws.com/key-name . Path-style requests are not supported. For more information, see Regional and Zonal endpoints in the Amazon S3 User Guide.    Amazon S3 is a distributed system. If it receives multiple write requests for the same object simultaneously, it overwrites all but the last object written. However, Amazon S3 provides features that can modify this behavior:    S3 Object Lock - To prevent objects from being deleted or overwritten, you can use Amazon S3 Object Lock in the Amazon S3 User Guide.  This functionality is not supported for directory buckets.     S3 Versioning - When you enable versioning for a bucket, if Amazon S3 receives multiple write requests for the same object simultaneously, it stores all versions of the objects. For each write request that is made to the same object, Amazon S3 automatically generates a unique version ID of that object being stored in Amazon S3. You can retrieve, replace, or delete any version of the object. For more information about versioning, see Adding Objects to Versioning-Enabled Buckets in the Amazon S3 User Guide. For information about returning the versioning state of a bucket, see GetBucketVersioning.   This functionality is not supported for directory buckets.     Permissions     General purpose bucket permissions - The following permissions are required in your policies when your PutObject request includes specific headers.     s3:PutObject  - To successfully complete the PutObject request, you must always have the s3:PutObject permission on a bucket to add an object to it.     s3:PutObjectAcl  - To successfully change the objects ACL of your PutObject request, you must have the s3:PutObjectAcl.     s3:PutObjectTagging  - To successfully set the tag-set with your PutObject request, you must have the s3:PutObjectTagging.      Directory bucket permissions - To grant access to this API operation on a directory bucket, we recommend that you use the  CreateSession  API operation for session-based authorization. Specifically, you grant the s3express:CreateSession permission to the directory bucket in a bucket policy or an IAM identity-based policy. Then, you make the CreateSession API call on the bucket to obtain a session token. With the session token in your request header, you can make API requests to this operation. After the session token expires, you make another CreateSession API call to generate a new session token for use. Amazon Web Services CLI or SDKs create session and refresh the session token automatically to avoid service interruptions when a session expires. For more information about authorization, see  CreateSession .    Data integrity with Content-MD5     General purpose bucket - To ensure that data is not corrupted traversing the network, use the Content-MD5 header. When you use this header, Amazon S3 checks the object against the provided MD5 value and, if they do not match, Amazon S3 returns an error. Alternatively, when the object's ETag is its MD5 digest, you can calculate the MD5 while putting the object to Amazon S3 and compare the returned ETag to the calculated MD5 value.    Directory bucket - This functionality is not supported for directory buckets.    HTTP Host header syntax   Directory buckets  - The HTTP Host header syntax is  Bucket_name.s3express-az_id.region.amazonaws.com.   For more information about related Amazon S3 APIs, see the following:    CopyObject     DeleteObject   
+   * Adds an object to a bucket.    Amazon S3 never adds partial objects; if you receive a success response, Amazon S3 added the entire object to the bucket. You cannot use PutObject to only update a single piece of metadata for an existing object. You must put the entire object with updated metadata if you want to update some values.   If your bucket uses the bucket owner enforced setting for Object Ownership, ACLs are disabled and no longer affect permissions. All objects written to the bucket by any account will be owned by the bucket owner.    Directory buckets - For directory buckets, you must make requests for this API operation to the Zonal endpoint. These endpoints support virtual-hosted-style requests in the format https://bucket_name.s3express-az_id.region.amazonaws.com/key-name . Path-style requests are not supported. For more information, see Regional and Zonal endpoints in the Amazon S3 User Guide.    Amazon S3 is a distributed system. If it receives multiple write requests for the same object simultaneously, it overwrites all but the last object written. However, Amazon S3 provides features that can modify this behavior:    S3 Object Lock - To prevent objects from being deleted or overwritten, you can use Amazon S3 Object Lock in the Amazon S3 User Guide.  This functionality is not supported for directory buckets.     S3 Versioning - When you enable versioning for a bucket, if Amazon S3 receives multiple write requests for the same object simultaneously, it stores all versions of the objects. For each write request that is made to the same object, Amazon S3 automatically generates a unique version ID of that object being stored in Amazon S3. You can retrieve, replace, or delete any version of the object. For more information about versioning, see Adding Objects to Versioning-Enabled Buckets in the Amazon S3 User Guide. For information about returning the versioning state of a bucket, see GetBucketVersioning.   This functionality is not supported for directory buckets.     Permissions     General purpose bucket permissions - The following permissions are required in your policies when your PutObject request includes specific headers.     s3:PutObject  - To successfully complete the PutObject request, you must always have the s3:PutObject permission on a bucket to add an object to it.     s3:PutObjectAcl  - To successfully change the objects ACL of your PutObject request, you must have the s3:PutObjectAcl.     s3:PutObjectTagging  - To successfully set the tag-set with your PutObject request, you must have the s3:PutObjectTagging.      Directory bucket permissions - To grant access to this API operation on a directory bucket, we recommend that you use the  CreateSession  API operation for session-based authorization. Specifically, you grant the s3express:CreateSession permission to the directory bucket in a bucket policy or an IAM identity-based policy. Then, you make the CreateSession API call on the bucket to obtain a session token. With the session token in your request header, you can make API requests to this operation. After the session token expires, you make another CreateSession API call to generate a new session token for use. Amazon Web Services CLI or SDKs create session and refresh the session token automatically to avoid service interruptions when a session expires. For more information about authorization, see  CreateSession . If the object is encrypted with SSE-KMS, you must also have the kms:GenerateDataKey and kms:Decrypt permissions in IAM identity-based policies and KMS key policies for the KMS key.    Data integrity with Content-MD5     General purpose bucket - To ensure that data is not corrupted traversing the network, use the Content-MD5 header. When you use this header, Amazon S3 checks the object against the provided MD5 value and, if they do not match, Amazon S3 returns an error. Alternatively, when the object's ETag is its MD5 digest, you can calculate the MD5 while putting the object to Amazon S3 and compare the returned ETag to the calculated MD5 value.    Directory bucket - This functionality is not supported for directory buckets.    HTTP Host header syntax   Directory buckets  - The HTTP Host header syntax is  Bucket_name.s3express-az_id.region.amazonaws.com.   For more information about related Amazon S3 APIs, see the following:    CopyObject     DeleteObject   
    */
   putObject(params: S3.Types.PutObjectRequest, callback?: (err: AWSError, data: S3.Types.PutObjectOutput) => void): Request<S3.Types.PutObjectOutput, AWSError>;
   /**
-   * Adds an object to a bucket.    Amazon S3 never adds partial objects; if you receive a success response, Amazon S3 added the entire object to the bucket. You cannot use PutObject to only update a single piece of metadata for an existing object. You must put the entire object with updated metadata if you want to update some values.   If your bucket uses the bucket owner enforced setting for Object Ownership, ACLs are disabled and no longer affect permissions. All objects written to the bucket by any account will be owned by the bucket owner.    Directory buckets - For directory buckets, you must make requests for this API operation to the Zonal endpoint. These endpoints support virtual-hosted-style requests in the format https://bucket_name.s3express-az_id.region.amazonaws.com/key-name . Path-style requests are not supported. For more information, see Regional and Zonal endpoints in the Amazon S3 User Guide.    Amazon S3 is a distributed system. If it receives multiple write requests for the same object simultaneously, it overwrites all but the last object written. However, Amazon S3 provides features that can modify this behavior:    S3 Object Lock - To prevent objects from being deleted or overwritten, you can use Amazon S3 Object Lock in the Amazon S3 User Guide.  This functionality is not supported for directory buckets.     S3 Versioning - When you enable versioning for a bucket, if Amazon S3 receives multiple write requests for the same object simultaneously, it stores all versions of the objects. For each write request that is made to the same object, Amazon S3 automatically generates a unique version ID of that object being stored in Amazon S3. You can retrieve, replace, or delete any version of the object. For more information about versioning, see Adding Objects to Versioning-Enabled Buckets in the Amazon S3 User Guide. For information about returning the versioning state of a bucket, see GetBucketVersioning.   This functionality is not supported for directory buckets.     Permissions     General purpose bucket permissions - The following permissions are required in your policies when your PutObject request includes specific headers.     s3:PutObject  - To successfully complete the PutObject request, you must always have the s3:PutObject permission on a bucket to add an object to it.     s3:PutObjectAcl  - To successfully change the objects ACL of your PutObject request, you must have the s3:PutObjectAcl.     s3:PutObjectTagging  - To successfully set the tag-set with your PutObject request, you must have the s3:PutObjectTagging.      Directory bucket permissions - To grant access to this API operation on a directory bucket, we recommend that you use the  CreateSession  API operation for session-based authorization. Specifically, you grant the s3express:CreateSession permission to the directory bucket in a bucket policy or an IAM identity-based policy. Then, you make the CreateSession API call on the bucket to obtain a session token. With the session token in your request header, you can make API requests to this operation. After the session token expires, you make another CreateSession API call to generate a new session token for use. Amazon Web Services CLI or SDKs create session and refresh the session token automatically to avoid service interruptions when a session expires. For more information about authorization, see  CreateSession .    Data integrity with Content-MD5     General purpose bucket - To ensure that data is not corrupted traversing the network, use the Content-MD5 header. When you use this header, Amazon S3 checks the object against the provided MD5 value and, if they do not match, Amazon S3 returns an error. Alternatively, when the object's ETag is its MD5 digest, you can calculate the MD5 while putting the object to Amazon S3 and compare the returned ETag to the calculated MD5 value.    Directory bucket - This functionality is not supported for directory buckets.    HTTP Host header syntax   Directory buckets  - The HTTP Host header syntax is  Bucket_name.s3express-az_id.region.amazonaws.com.   For more information about related Amazon S3 APIs, see the following:    CopyObject     DeleteObject   
+   * Adds an object to a bucket.    Amazon S3 never adds partial objects; if you receive a success response, Amazon S3 added the entire object to the bucket. You cannot use PutObject to only update a single piece of metadata for an existing object. You must put the entire object with updated metadata if you want to update some values.   If your bucket uses the bucket owner enforced setting for Object Ownership, ACLs are disabled and no longer affect permissions. All objects written to the bucket by any account will be owned by the bucket owner.    Directory buckets - For directory buckets, you must make requests for this API operation to the Zonal endpoint. These endpoints support virtual-hosted-style requests in the format https://bucket_name.s3express-az_id.region.amazonaws.com/key-name . Path-style requests are not supported. For more information, see Regional and Zonal endpoints in the Amazon S3 User Guide.    Amazon S3 is a distributed system. If it receives multiple write requests for the same object simultaneously, it overwrites all but the last object written. However, Amazon S3 provides features that can modify this behavior:    S3 Object Lock - To prevent objects from being deleted or overwritten, you can use Amazon S3 Object Lock in the Amazon S3 User Guide.  This functionality is not supported for directory buckets.     S3 Versioning - When you enable versioning for a bucket, if Amazon S3 receives multiple write requests for the same object simultaneously, it stores all versions of the objects. For each write request that is made to the same object, Amazon S3 automatically generates a unique version ID of that object being stored in Amazon S3. You can retrieve, replace, or delete any version of the object. For more information about versioning, see Adding Objects to Versioning-Enabled Buckets in the Amazon S3 User Guide. For information about returning the versioning state of a bucket, see GetBucketVersioning.   This functionality is not supported for directory buckets.     Permissions     General purpose bucket permissions - The following permissions are required in your policies when your PutObject request includes specific headers.     s3:PutObject  - To successfully complete the PutObject request, you must always have the s3:PutObject permission on a bucket to add an object to it.     s3:PutObjectAcl  - To successfully change the objects ACL of your PutObject request, you must have the s3:PutObjectAcl.     s3:PutObjectTagging  - To successfully set the tag-set with your PutObject request, you must have the s3:PutObjectTagging.      Directory bucket permissions - To grant access to this API operation on a directory bucket, we recommend that you use the  CreateSession  API operation for session-based authorization. Specifically, you grant the s3express:CreateSession permission to the directory bucket in a bucket policy or an IAM identity-based policy. Then, you make the CreateSession API call on the bucket to obtain a session token. With the session token in your request header, you can make API requests to this operation. After the session token expires, you make another CreateSession API call to generate a new session token for use. Amazon Web Services CLI or SDKs create session and refresh the session token automatically to avoid service interruptions when a session expires. For more information about authorization, see  CreateSession . If the object is encrypted with SSE-KMS, you must also have the kms:GenerateDataKey and kms:Decrypt permissions in IAM identity-based policies and KMS key policies for the KMS key.    Data integrity with Content-MD5     General purpose bucket - To ensure that data is not corrupted traversing the network, use the Content-MD5 header. When you use this header, Amazon S3 checks the object against the provided MD5 value and, if they do not match, Amazon S3 returns an error. Alternatively, when the object's ETag is its MD5 digest, you can calculate the MD5 while putting the object to Amazon S3 and compare the returned ETag to the calculated MD5 value.    Directory bucket - This functionality is not supported for directory buckets.    HTTP Host header syntax   Directory buckets  - The HTTP Host header syntax is  Bucket_name.s3express-az_id.region.amazonaws.com.   For more information about related Amazon S3 APIs, see the following:    CopyObject     DeleteObject   
    */
   putObject(callback?: (err: AWSError, data: S3.Types.PutObjectOutput) => void): Request<S3.Types.PutObjectOutput, AWSError>;
   /**
@@ -770,35 +770,35 @@ declare class S3 extends S3Customizations {
    */
   putPublicAccessBlock(callback?: (err: AWSError, data: {}) => void): Request<{}, AWSError>;
   /**
-   *  This operation is not supported by directory buckets.   The SELECT job type for the RestoreObject operation is no longer available to new customers. Existing customers of Amazon S3 Select can continue to use the feature as usual. Learn more   Restores an archived copy of an object back into Amazon S3 This functionality is not supported for Amazon S3 on Outposts. This action performs the following types of requests:     restore an archive - Restore an archived object   For more information about the S3 structure in the request body, see the following:    PutObject     Managing Access with ACLs in the Amazon S3 User Guide     Protecting Data Using Server-Side Encryption in the Amazon S3 User Guide     Permissions  To use this operation, you must have permissions to perform the s3:RestoreObject action. The bucket owner has this permission by default and can grant this permission to others. For more information about permissions, see Permissions Related to Bucket Subresource Operations and Managing Access Permissions to Your Amazon S3 Resources in the Amazon S3 User Guide.  Restoring objects  Objects that you archive to the S3 Glacier Flexible Retrieval Flexible Retrieval or S3 Glacier Deep Archive storage class, and S3 Intelligent-Tiering Archive or S3 Intelligent-Tiering Deep Archive tiers, are not accessible in real time. For objects in the S3 Glacier Flexible Retrieval Flexible Retrieval or S3 Glacier Deep Archive storage classes, you must first initiate a restore request, and then wait until a temporary copy of the object is available. If you want a permanent copy of the object, create a copy of it in the Amazon S3 Standard storage class in your S3 bucket. To access an archived object, you must restore the object for the duration (number of days) that you specify. For objects in the Archive Access or Deep Archive Access tiers of S3 Intelligent-Tiering, you must first initiate a restore request, and then wait until the object is moved into the Frequent Access tier. To restore a specific object version, you can provide a version ID. If you don't provide a version ID, Amazon S3 restores the current version. When restoring an archived object, you can specify one of the following data access tier options in the Tier element of the request body:     Expedited - Expedited retrievals allow you to quickly access your data stored in the S3 Glacier Flexible Retrieval Flexible Retrieval storage class or S3 Intelligent-Tiering Archive tier when occasional urgent requests for restoring archives are required. For all but the largest archived objects (250 MB+), data accessed using Expedited retrievals is typically made available within 1–5 minutes. Provisioned capacity ensures that retrieval capacity for Expedited retrievals is available when you need it. Expedited retrievals and provisioned capacity are not available for objects stored in the S3 Glacier Deep Archive storage class or S3 Intelligent-Tiering Deep Archive tier.    Standard - Standard retrievals allow you to access any of your archived objects within several hours. This is the default option for retrieval requests that do not specify the retrieval option. Standard retrievals typically finish within 3–5 hours for objects stored in the S3 Glacier Flexible Retrieval Flexible Retrieval storage class or S3 Intelligent-Tiering Archive tier. They typically finish within 12 hours for objects stored in the S3 Glacier Deep Archive storage class or S3 Intelligent-Tiering Deep Archive tier. Standard retrievals are free for objects stored in S3 Intelligent-Tiering.    Bulk - Bulk retrievals free for objects stored in the S3 Glacier Flexible Retrieval and S3 Intelligent-Tiering storage classes, enabling you to retrieve large amounts, even petabytes, of data at no cost. Bulk retrievals typically finish within 5–12 hours for objects stored in the S3 Glacier Flexible Retrieval Flexible Retrieval storage class or S3 Intelligent-Tiering Archive tier. Bulk retrievals are also the lowest-cost retrieval option when restoring objects from S3 Glacier Deep Archive. They typically finish within 48 hours for objects stored in the S3 Glacier Deep Archive storage class or S3 Intelligent-Tiering Deep Archive tier.    For more information about archive retrieval options and provisioned capacity for Expedited data access, see Restoring Archived Objects in the Amazon S3 User Guide.  You can use Amazon S3 restore speed upgrade to change the restore speed to a faster speed while it is in progress. For more information, see  Upgrading the speed of an in-progress restore in the Amazon S3 User Guide.  To get the status of object restoration, you can send a HEAD request. Operations return the x-amz-restore header, which provides information about the restoration status, in the response. You can use Amazon S3 event notifications to notify you when a restore is initiated or completed. For more information, see Configuring Amazon S3 Event Notifications in the Amazon S3 User Guide. After restoring an archived object, you can update the restoration period by reissuing the request with a new period. Amazon S3 updates the restoration period relative to the current time and charges only for the request-there are no data transfer charges. You cannot update the restoration period when Amazon S3 is actively processing your current restore request for the object. If your bucket has a lifecycle configuration with a rule that includes an expiration action, the object expiration overrides the life span that you specify in a restore request. For example, if you restore an object copy for 10 days, but the object is scheduled to expire in 3 days, Amazon S3 deletes the object in 3 days. For more information about lifecycle configuration, see PutBucketLifecycleConfiguration and Object Lifecycle Management in Amazon S3 User Guide.  Responses  A successful action returns either the 200 OK or 202 Accepted status code.    If the object is not previously restored, then Amazon S3 returns 202 Accepted in the response.    If the object is previously restored, Amazon S3 returns 200 OK in the response.      Special errors:    Code: RestoreAlreadyInProgress     Cause: Object restore is already in progress.     HTTP Status Code: 409 Conflict     SOAP Fault Code Prefix: Client         Code: GlacierExpeditedRetrievalNotAvailable     Cause: expedited retrievals are currently not available. Try again later. (Returned if there is insufficient capacity to process the Expedited request. This error applies only to Expedited retrievals and not to S3 Standard or Bulk retrievals.)     HTTP Status Code: 503     SOAP Fault Code Prefix: N/A        The following operations are related to RestoreObject:    PutBucketLifecycleConfiguration     GetBucketNotificationConfiguration   
+   *  This operation is not supported by directory buckets.  Restores an archived copy of an object back into Amazon S3 This functionality is not supported for Amazon S3 on Outposts. This action performs the following types of requests:     restore an archive - Restore an archived object   For more information about the S3 structure in the request body, see the following:    PutObject     Managing Access with ACLs in the Amazon S3 User Guide     Protecting Data Using Server-Side Encryption in the Amazon S3 User Guide     Permissions  To use this operation, you must have permissions to perform the s3:RestoreObject action. The bucket owner has this permission by default and can grant this permission to others. For more information about permissions, see Permissions Related to Bucket Subresource Operations and Managing Access Permissions to Your Amazon S3 Resources in the Amazon S3 User Guide.  Restoring objects  Objects that you archive to the S3 Glacier Flexible Retrieval Flexible Retrieval or S3 Glacier Deep Archive storage class, and S3 Intelligent-Tiering Archive or S3 Intelligent-Tiering Deep Archive tiers, are not accessible in real time. For objects in the S3 Glacier Flexible Retrieval Flexible Retrieval or S3 Glacier Deep Archive storage classes, you must first initiate a restore request, and then wait until a temporary copy of the object is available. If you want a permanent copy of the object, create a copy of it in the Amazon S3 Standard storage class in your S3 bucket. To access an archived object, you must restore the object for the duration (number of days) that you specify. For objects in the Archive Access or Deep Archive Access tiers of S3 Intelligent-Tiering, you must first initiate a restore request, and then wait until the object is moved into the Frequent Access tier. To restore a specific object version, you can provide a version ID. If you don't provide a version ID, Amazon S3 restores the current version. When restoring an archived object, you can specify one of the following data access tier options in the Tier element of the request body:     Expedited - Expedited retrievals allow you to quickly access your data stored in the S3 Glacier Flexible Retrieval Flexible Retrieval storage class or S3 Intelligent-Tiering Archive tier when occasional urgent requests for restoring archives are required. For all but the largest archived objects (250 MB+), data accessed using Expedited retrievals is typically made available within 1–5 minutes. Provisioned capacity ensures that retrieval capacity for Expedited retrievals is available when you need it. Expedited retrievals and provisioned capacity are not available for objects stored in the S3 Glacier Deep Archive storage class or S3 Intelligent-Tiering Deep Archive tier.    Standard - Standard retrievals allow you to access any of your archived objects within several hours. This is the default option for retrieval requests that do not specify the retrieval option. Standard retrievals typically finish within 3–5 hours for objects stored in the S3 Glacier Flexible Retrieval Flexible Retrieval storage class or S3 Intelligent-Tiering Archive tier. They typically finish within 12 hours for objects stored in the S3 Glacier Deep Archive storage class or S3 Intelligent-Tiering Deep Archive tier. Standard retrievals are free for objects stored in S3 Intelligent-Tiering.    Bulk - Bulk retrievals free for objects stored in the S3 Glacier Flexible Retrieval and S3 Intelligent-Tiering storage classes, enabling you to retrieve large amounts, even petabytes, of data at no cost. Bulk retrievals typically finish within 5–12 hours for objects stored in the S3 Glacier Flexible Retrieval Flexible Retrieval storage class or S3 Intelligent-Tiering Archive tier. Bulk retrievals are also the lowest-cost retrieval option when restoring objects from S3 Glacier Deep Archive. They typically finish within 48 hours for objects stored in the S3 Glacier Deep Archive storage class or S3 Intelligent-Tiering Deep Archive tier.    For more information about archive retrieval options and provisioned capacity for Expedited data access, see Restoring Archived Objects in the Amazon S3 User Guide.  You can use Amazon S3 restore speed upgrade to change the restore speed to a faster speed while it is in progress. For more information, see  Upgrading the speed of an in-progress restore in the Amazon S3 User Guide.  To get the status of object restoration, you can send a HEAD request. Operations return the x-amz-restore header, which provides information about the restoration status, in the response. You can use Amazon S3 event notifications to notify you when a restore is initiated or completed. For more information, see Configuring Amazon S3 Event Notifications in the Amazon S3 User Guide. After restoring an archived object, you can update the restoration period by reissuing the request with a new period. Amazon S3 updates the restoration period relative to the current time and charges only for the request-there are no data transfer charges. You cannot update the restoration period when Amazon S3 is actively processing your current restore request for the object. If your bucket has a lifecycle configuration with a rule that includes an expiration action, the object expiration overrides the life span that you specify in a restore request. For example, if you restore an object copy for 10 days, but the object is scheduled to expire in 3 days, Amazon S3 deletes the object in 3 days. For more information about lifecycle configuration, see PutBucketLifecycleConfiguration and Object Lifecycle Management in Amazon S3 User Guide.  Responses  A successful action returns either the 200 OK or 202 Accepted status code.    If the object is not previously restored, then Amazon S3 returns 202 Accepted in the response.    If the object is previously restored, Amazon S3 returns 200 OK in the response.      Special errors:    Code: RestoreAlreadyInProgress     Cause: Object restore is already in progress.     HTTP Status Code: 409 Conflict     SOAP Fault Code Prefix: Client         Code: GlacierExpeditedRetrievalNotAvailable     Cause: expedited retrievals are currently not available. Try again later. (Returned if there is insufficient capacity to process the Expedited request. This error applies only to Expedited retrievals and not to S3 Standard or Bulk retrievals.)     HTTP Status Code: 503     SOAP Fault Code Prefix: N/A        The following operations are related to RestoreObject:    PutBucketLifecycleConfiguration     GetBucketNotificationConfiguration   
    */
   restoreObject(params: S3.Types.RestoreObjectRequest, callback?: (err: AWSError, data: S3.Types.RestoreObjectOutput) => void): Request<S3.Types.RestoreObjectOutput, AWSError>;
   /**
-   *  This operation is not supported by directory buckets.   The SELECT job type for the RestoreObject operation is no longer available to new customers. Existing customers of Amazon S3 Select can continue to use the feature as usual. Learn more   Restores an archived copy of an object back into Amazon S3 This functionality is not supported for Amazon S3 on Outposts. This action performs the following types of requests:     restore an archive - Restore an archived object   For more information about the S3 structure in the request body, see the following:    PutObject     Managing Access with ACLs in the Amazon S3 User Guide     Protecting Data Using Server-Side Encryption in the Amazon S3 User Guide     Permissions  To use this operation, you must have permissions to perform the s3:RestoreObject action. The bucket owner has this permission by default and can grant this permission to others. For more information about permissions, see Permissions Related to Bucket Subresource Operations and Managing Access Permissions to Your Amazon S3 Resources in the Amazon S3 User Guide.  Restoring objects  Objects that you archive to the S3 Glacier Flexible Retrieval Flexible Retrieval or S3 Glacier Deep Archive storage class, and S3 Intelligent-Tiering Archive or S3 Intelligent-Tiering Deep Archive tiers, are not accessible in real time. For objects in the S3 Glacier Flexible Retrieval Flexible Retrieval or S3 Glacier Deep Archive storage classes, you must first initiate a restore request, and then wait until a temporary copy of the object is available. If you want a permanent copy of the object, create a copy of it in the Amazon S3 Standard storage class in your S3 bucket. To access an archived object, you must restore the object for the duration (number of days) that you specify. For objects in the Archive Access or Deep Archive Access tiers of S3 Intelligent-Tiering, you must first initiate a restore request, and then wait until the object is moved into the Frequent Access tier. To restore a specific object version, you can provide a version ID. If you don't provide a version ID, Amazon S3 restores the current version. When restoring an archived object, you can specify one of the following data access tier options in the Tier element of the request body:     Expedited - Expedited retrievals allow you to quickly access your data stored in the S3 Glacier Flexible Retrieval Flexible Retrieval storage class or S3 Intelligent-Tiering Archive tier when occasional urgent requests for restoring archives are required. For all but the largest archived objects (250 MB+), data accessed using Expedited retrievals is typically made available within 1–5 minutes. Provisioned capacity ensures that retrieval capacity for Expedited retrievals is available when you need it. Expedited retrievals and provisioned capacity are not available for objects stored in the S3 Glacier Deep Archive storage class or S3 Intelligent-Tiering Deep Archive tier.    Standard - Standard retrievals allow you to access any of your archived objects within several hours. This is the default option for retrieval requests that do not specify the retrieval option. Standard retrievals typically finish within 3–5 hours for objects stored in the S3 Glacier Flexible Retrieval Flexible Retrieval storage class or S3 Intelligent-Tiering Archive tier. They typically finish within 12 hours for objects stored in the S3 Glacier Deep Archive storage class or S3 Intelligent-Tiering Deep Archive tier. Standard retrievals are free for objects stored in S3 Intelligent-Tiering.    Bulk - Bulk retrievals free for objects stored in the S3 Glacier Flexible Retrieval and S3 Intelligent-Tiering storage classes, enabling you to retrieve large amounts, even petabytes, of data at no cost. Bulk retrievals typically finish within 5–12 hours for objects stored in the S3 Glacier Flexible Retrieval Flexible Retrieval storage class or S3 Intelligent-Tiering Archive tier. Bulk retrievals are also the lowest-cost retrieval option when restoring objects from S3 Glacier Deep Archive. They typically finish within 48 hours for objects stored in the S3 Glacier Deep Archive storage class or S3 Intelligent-Tiering Deep Archive tier.    For more information about archive retrieval options and provisioned capacity for Expedited data access, see Restoring Archived Objects in the Amazon S3 User Guide.  You can use Amazon S3 restore speed upgrade to change the restore speed to a faster speed while it is in progress. For more information, see  Upgrading the speed of an in-progress restore in the Amazon S3 User Guide.  To get the status of object restoration, you can send a HEAD request. Operations return the x-amz-restore header, which provides information about the restoration status, in the response. You can use Amazon S3 event notifications to notify you when a restore is initiated or completed. For more information, see Configuring Amazon S3 Event Notifications in the Amazon S3 User Guide. After restoring an archived object, you can update the restoration period by reissuing the request with a new period. Amazon S3 updates the restoration period relative to the current time and charges only for the request-there are no data transfer charges. You cannot update the restoration period when Amazon S3 is actively processing your current restore request for the object. If your bucket has a lifecycle configuration with a rule that includes an expiration action, the object expiration overrides the life span that you specify in a restore request. For example, if you restore an object copy for 10 days, but the object is scheduled to expire in 3 days, Amazon S3 deletes the object in 3 days. For more information about lifecycle configuration, see PutBucketLifecycleConfiguration and Object Lifecycle Management in Amazon S3 User Guide.  Responses  A successful action returns either the 200 OK or 202 Accepted status code.    If the object is not previously restored, then Amazon S3 returns 202 Accepted in the response.    If the object is previously restored, Amazon S3 returns 200 OK in the response.      Special errors:    Code: RestoreAlreadyInProgress     Cause: Object restore is already in progress.     HTTP Status Code: 409 Conflict     SOAP Fault Code Prefix: Client         Code: GlacierExpeditedRetrievalNotAvailable     Cause: expedited retrievals are currently not available. Try again later. (Returned if there is insufficient capacity to process the Expedited request. This error applies only to Expedited retrievals and not to S3 Standard or Bulk retrievals.)     HTTP Status Code: 503     SOAP Fault Code Prefix: N/A        The following operations are related to RestoreObject:    PutBucketLifecycleConfiguration     GetBucketNotificationConfiguration   
+   *  This operation is not supported by directory buckets.  Restores an archived copy of an object back into Amazon S3 This functionality is not supported for Amazon S3 on Outposts. This action performs the following types of requests:     restore an archive - Restore an archived object   For more information about the S3 structure in the request body, see the following:    PutObject     Managing Access with ACLs in the Amazon S3 User Guide     Protecting Data Using Server-Side Encryption in the Amazon S3 User Guide     Permissions  To use this operation, you must have permissions to perform the s3:RestoreObject action. The bucket owner has this permission by default and can grant this permission to others. For more information about permissions, see Permissions Related to Bucket Subresource Operations and Managing Access Permissions to Your Amazon S3 Resources in the Amazon S3 User Guide.  Restoring objects  Objects that you archive to the S3 Glacier Flexible Retrieval Flexible Retrieval or S3 Glacier Deep Archive storage class, and S3 Intelligent-Tiering Archive or S3 Intelligent-Tiering Deep Archive tiers, are not accessible in real time. For objects in the S3 Glacier Flexible Retrieval Flexible Retrieval or S3 Glacier Deep Archive storage classes, you must first initiate a restore request, and then wait until a temporary copy of the object is available. If you want a permanent copy of the object, create a copy of it in the Amazon S3 Standard storage class in your S3 bucket. To access an archived object, you must restore the object for the duration (number of days) that you specify. For objects in the Archive Access or Deep Archive Access tiers of S3 Intelligent-Tiering, you must first initiate a restore request, and then wait until the object is moved into the Frequent Access tier. To restore a specific object version, you can provide a version ID. If you don't provide a version ID, Amazon S3 restores the current version. When restoring an archived object, you can specify one of the following data access tier options in the Tier element of the request body:     Expedited - Expedited retrievals allow you to quickly access your data stored in the S3 Glacier Flexible Retrieval Flexible Retrieval storage class or S3 Intelligent-Tiering Archive tier when occasional urgent requests for restoring archives are required. For all but the largest archived objects (250 MB+), data accessed using Expedited retrievals is typically made available within 1–5 minutes. Provisioned capacity ensures that retrieval capacity for Expedited retrievals is available when you need it. Expedited retrievals and provisioned capacity are not available for objects stored in the S3 Glacier Deep Archive storage class or S3 Intelligent-Tiering Deep Archive tier.    Standard - Standard retrievals allow you to access any of your archived objects within several hours. This is the default option for retrieval requests that do not specify the retrieval option. Standard retrievals typically finish within 3–5 hours for objects stored in the S3 Glacier Flexible Retrieval Flexible Retrieval storage class or S3 Intelligent-Tiering Archive tier. They typically finish within 12 hours for objects stored in the S3 Glacier Deep Archive storage class or S3 Intelligent-Tiering Deep Archive tier. Standard retrievals are free for objects stored in S3 Intelligent-Tiering.    Bulk - Bulk retrievals free for objects stored in the S3 Glacier Flexible Retrieval and S3 Intelligent-Tiering storage classes, enabling you to retrieve large amounts, even petabytes, of data at no cost. Bulk retrievals typically finish within 5–12 hours for objects stored in the S3 Glacier Flexible Retrieval Flexible Retrieval storage class or S3 Intelligent-Tiering Archive tier. Bulk retrievals are also the lowest-cost retrieval option when restoring objects from S3 Glacier Deep Archive. They typically finish within 48 hours for objects stored in the S3 Glacier Deep Archive storage class or S3 Intelligent-Tiering Deep Archive tier.    For more information about archive retrieval options and provisioned capacity for Expedited data access, see Restoring Archived Objects in the Amazon S3 User Guide.  You can use Amazon S3 restore speed upgrade to change the restore speed to a faster speed while it is in progress. For more information, see  Upgrading the speed of an in-progress restore in the Amazon S3 User Guide.  To get the status of object restoration, you can send a HEAD request. Operations return the x-amz-restore header, which provides information about the restoration status, in the response. You can use Amazon S3 event notifications to notify you when a restore is initiated or completed. For more information, see Configuring Amazon S3 Event Notifications in the Amazon S3 User Guide. After restoring an archived object, you can update the restoration period by reissuing the request with a new period. Amazon S3 updates the restoration period relative to the current time and charges only for the request-there are no data transfer charges. You cannot update the restoration period when Amazon S3 is actively processing your current restore request for the object. If your bucket has a lifecycle configuration with a rule that includes an expiration action, the object expiration overrides the life span that you specify in a restore request. For example, if you restore an object copy for 10 days, but the object is scheduled to expire in 3 days, Amazon S3 deletes the object in 3 days. For more information about lifecycle configuration, see PutBucketLifecycleConfiguration and Object Lifecycle Management in Amazon S3 User Guide.  Responses  A successful action returns either the 200 OK or 202 Accepted status code.    If the object is not previously restored, then Amazon S3 returns 202 Accepted in the response.    If the object is previously restored, Amazon S3 returns 200 OK in the response.      Special errors:    Code: RestoreAlreadyInProgress     Cause: Object restore is already in progress.     HTTP Status Code: 409 Conflict     SOAP Fault Code Prefix: Client         Code: GlacierExpeditedRetrievalNotAvailable     Cause: expedited retrievals are currently not available. Try again later. (Returned if there is insufficient capacity to process the Expedited request. This error applies only to Expedited retrievals and not to S3 Standard or Bulk retrievals.)     HTTP Status Code: 503     SOAP Fault Code Prefix: N/A        The following operations are related to RestoreObject:    PutBucketLifecycleConfiguration     GetBucketNotificationConfiguration   
    */
   restoreObject(callback?: (err: AWSError, data: S3.Types.RestoreObjectOutput) => void): Request<S3.Types.RestoreObjectOutput, AWSError>;
   /**
-   *  This operation is not supported by directory buckets.   The SelectObjectContent operation is no longer available to new customers. Existing customers of Amazon S3 Select can continue to use the operation as usual. Learn more   This action filters the contents of an Amazon S3 object based on a simple structured query language (SQL) statement. In the request, along with the SQL expression, you must also specify a data serialization format (JSON, CSV, or Apache Parquet) of the object. Amazon S3 uses this format to parse object data into records, and returns only records that match the specified SQL expression. You must also specify the data serialization format for the response. This functionality is not supported for Amazon S3 on Outposts. For more information about Amazon S3 Select, see Selecting Content from Objects and SELECT Command in the Amazon S3 User Guide.   Permissions  You must have the s3:GetObject permission for this operation. Amazon S3 Select does not support anonymous access. For more information about permissions, see Specifying Permissions in a Policy in the Amazon S3 User Guide.  Object Data Formats  You can use Amazon S3 Select to query objects that have the following format properties:    CSV, JSON, and Parquet - Objects must be in CSV, JSON, or Parquet format.    UTF-8 - UTF-8 is the only encoding type Amazon S3 Select supports.    GZIP or BZIP2 - CSV and JSON files can be compressed using GZIP or BZIP2. GZIP and BZIP2 are the only compression formats that Amazon S3 Select supports for CSV and JSON files. Amazon S3 Select supports columnar compression for Parquet using GZIP or Snappy. Amazon S3 Select does not support whole-object compression for Parquet objects.    Server-side encryption - Amazon S3 Select supports querying objects that are protected with server-side encryption. For objects that are encrypted with customer-provided encryption keys (SSE-C), you must use HTTPS, and you must use the headers that are documented in the GetObject. For more information about SSE-C, see Server-Side Encryption (Using Customer-Provided Encryption Keys) in the Amazon S3 User Guide. For objects that are encrypted with Amazon S3 managed keys (SSE-S3) and Amazon Web Services KMS keys (SSE-KMS), server-side encryption is handled transparently, so you don't need to specify anything. For more information about server-side encryption, including SSE-S3 and SSE-KMS, see Protecting Data Using Server-Side Encryption in the Amazon S3 User Guide.    Working with the Response Body  Given the response size is unknown, Amazon S3 Select streams the response as a series of messages and includes a Transfer-Encoding header with chunked as its value in the response. For more information, see Appendix: SelectObjectContent Response.  GetObject Support  The SelectObjectContent action does not support the following GetObject functionality. For more information, see GetObject.    Range: Although you can specify a scan range for an Amazon S3 Select request (see SelectObjectContentRequest - ScanRange in the request parameters), you cannot specify the range of bytes of an object to return.    The GLACIER, DEEP_ARCHIVE, and REDUCED_REDUNDANCY storage classes, or the ARCHIVE_ACCESS and DEEP_ARCHIVE_ACCESS access tiers of the INTELLIGENT_TIERING storage class: You cannot query objects in the GLACIER, DEEP_ARCHIVE, or REDUCED_REDUNDANCY storage classes, nor objects in the ARCHIVE_ACCESS or DEEP_ARCHIVE_ACCESS access tiers of the INTELLIGENT_TIERING storage class. For more information about storage classes, see Using Amazon S3 storage classes in the Amazon S3 User Guide.    Special Errors  For a list of special errors for this operation, see List of SELECT Object Content Error Codes    The following operations are related to SelectObjectContent:    GetObject     GetBucketLifecycleConfiguration     PutBucketLifecycleConfiguration   
+   *  This operation is not supported by directory buckets.  This action filters the contents of an Amazon S3 object based on a simple structured query language (SQL) statement. In the request, along with the SQL expression, you must also specify a data serialization format (JSON, CSV, or Apache Parquet) of the object. Amazon S3 uses this format to parse object data into records, and returns only records that match the specified SQL expression. You must also specify the data serialization format for the response. This functionality is not supported for Amazon S3 on Outposts. For more information about Amazon S3 Select, see Selecting Content from Objects and SELECT Command in the Amazon S3 User Guide.   Permissions  You must have the s3:GetObject permission for this operation. Amazon S3 Select does not support anonymous access. For more information about permissions, see Specifying Permissions in a Policy in the Amazon S3 User Guide.  Object Data Formats  You can use Amazon S3 Select to query objects that have the following format properties:    CSV, JSON, and Parquet - Objects must be in CSV, JSON, or Parquet format.    UTF-8 - UTF-8 is the only encoding type Amazon S3 Select supports.    GZIP or BZIP2 - CSV and JSON files can be compressed using GZIP or BZIP2. GZIP and BZIP2 are the only compression formats that Amazon S3 Select supports for CSV and JSON files. Amazon S3 Select supports columnar compression for Parquet using GZIP or Snappy. Amazon S3 Select does not support whole-object compression for Parquet objects.    Server-side encryption - Amazon S3 Select supports querying objects that are protected with server-side encryption. For objects that are encrypted with customer-provided encryption keys (SSE-C), you must use HTTPS, and you must use the headers that are documented in the GetObject. For more information about SSE-C, see Server-Side Encryption (Using Customer-Provided Encryption Keys) in the Amazon S3 User Guide. For objects that are encrypted with Amazon S3 managed keys (SSE-S3) and Amazon Web Services KMS keys (SSE-KMS), server-side encryption is handled transparently, so you don't need to specify anything. For more information about server-side encryption, including SSE-S3 and SSE-KMS, see Protecting Data Using Server-Side Encryption in the Amazon S3 User Guide.    Working with the Response Body  Given the response size is unknown, Amazon S3 Select streams the response as a series of messages and includes a Transfer-Encoding header with chunked as its value in the response. For more information, see Appendix: SelectObjectContent Response.  GetObject Support  The SelectObjectContent action does not support the following GetObject functionality. For more information, see GetObject.    Range: Although you can specify a scan range for an Amazon S3 Select request (see SelectObjectContentRequest - ScanRange in the request parameters), you cannot specify the range of bytes of an object to return.    The GLACIER, DEEP_ARCHIVE, and REDUCED_REDUNDANCY storage classes, or the ARCHIVE_ACCESS and DEEP_ARCHIVE_ACCESS access tiers of the INTELLIGENT_TIERING storage class: You cannot query objects in the GLACIER, DEEP_ARCHIVE, or REDUCED_REDUNDANCY storage classes, nor objects in the ARCHIVE_ACCESS or DEEP_ARCHIVE_ACCESS access tiers of the INTELLIGENT_TIERING storage class. For more information about storage classes, see Using Amazon S3 storage classes in the Amazon S3 User Guide.    Special Errors  For a list of special errors for this operation, see List of SELECT Object Content Error Codes    The following operations are related to SelectObjectContent:    GetObject     GetBucketLifecycleConfiguration     PutBucketLifecycleConfiguration   
    */
   selectObjectContent(params: S3.Types.SelectObjectContentRequest, callback?: (err: AWSError, data: S3.Types.SelectObjectContentOutput) => void): Request<S3.Types.SelectObjectContentOutput, AWSError>;
   /**
-   *  This operation is not supported by directory buckets.   The SelectObjectContent operation is no longer available to new customers. Existing customers of Amazon S3 Select can continue to use the operation as usual. Learn more   This action filters the contents of an Amazon S3 object based on a simple structured query language (SQL) statement. In the request, along with the SQL expression, you must also specify a data serialization format (JSON, CSV, or Apache Parquet) of the object. Amazon S3 uses this format to parse object data into records, and returns only records that match the specified SQL expression. You must also specify the data serialization format for the response. This functionality is not supported for Amazon S3 on Outposts. For more information about Amazon S3 Select, see Selecting Content from Objects and SELECT Command in the Amazon S3 User Guide.   Permissions  You must have the s3:GetObject permission for this operation. Amazon S3 Select does not support anonymous access. For more information about permissions, see Specifying Permissions in a Policy in the Amazon S3 User Guide.  Object Data Formats  You can use Amazon S3 Select to query objects that have the following format properties:    CSV, JSON, and Parquet - Objects must be in CSV, JSON, or Parquet format.    UTF-8 - UTF-8 is the only encoding type Amazon S3 Select supports.    GZIP or BZIP2 - CSV and JSON files can be compressed using GZIP or BZIP2. GZIP and BZIP2 are the only compression formats that Amazon S3 Select supports for CSV and JSON files. Amazon S3 Select supports columnar compression for Parquet using GZIP or Snappy. Amazon S3 Select does not support whole-object compression for Parquet objects.    Server-side encryption - Amazon S3 Select supports querying objects that are protected with server-side encryption. For objects that are encrypted with customer-provided encryption keys (SSE-C), you must use HTTPS, and you must use the headers that are documented in the GetObject. For more information about SSE-C, see Server-Side Encryption (Using Customer-Provided Encryption Keys) in the Amazon S3 User Guide. For objects that are encrypted with Amazon S3 managed keys (SSE-S3) and Amazon Web Services KMS keys (SSE-KMS), server-side encryption is handled transparently, so you don't need to specify anything. For more information about server-side encryption, including SSE-S3 and SSE-KMS, see Protecting Data Using Server-Side Encryption in the Amazon S3 User Guide.    Working with the Response Body  Given the response size is unknown, Amazon S3 Select streams the response as a series of messages and includes a Transfer-Encoding header with chunked as its value in the response. For more information, see Appendix: SelectObjectContent Response.  GetObject Support  The SelectObjectContent action does not support the following GetObject functionality. For more information, see GetObject.    Range: Although you can specify a scan range for an Amazon S3 Select request (see SelectObjectContentRequest - ScanRange in the request parameters), you cannot specify the range of bytes of an object to return.    The GLACIER, DEEP_ARCHIVE, and REDUCED_REDUNDANCY storage classes, or the ARCHIVE_ACCESS and DEEP_ARCHIVE_ACCESS access tiers of the INTELLIGENT_TIERING storage class: You cannot query objects in the GLACIER, DEEP_ARCHIVE, or REDUCED_REDUNDANCY storage classes, nor objects in the ARCHIVE_ACCESS or DEEP_ARCHIVE_ACCESS access tiers of the INTELLIGENT_TIERING storage class. For more information about storage classes, see Using Amazon S3 storage classes in the Amazon S3 User Guide.    Special Errors  For a list of special errors for this operation, see List of SELECT Object Content Error Codes    The following operations are related to SelectObjectContent:    GetObject     GetBucketLifecycleConfiguration     PutBucketLifecycleConfiguration   
+   *  This operation is not supported by directory buckets.  This action filters the contents of an Amazon S3 object based on a simple structured query language (SQL) statement. In the request, along with the SQL expression, you must also specify a data serialization format (JSON, CSV, or Apache Parquet) of the object. Amazon S3 uses this format to parse object data into records, and returns only records that match the specified SQL expression. You must also specify the data serialization format for the response. This functionality is not supported for Amazon S3 on Outposts. For more information about Amazon S3 Select, see Selecting Content from Objects and SELECT Command in the Amazon S3 User Guide.   Permissions  You must have the s3:GetObject permission for this operation. Amazon S3 Select does not support anonymous access. For more information about permissions, see Specifying Permissions in a Policy in the Amazon S3 User Guide.  Object Data Formats  You can use Amazon S3 Select to query objects that have the following format properties:    CSV, JSON, and Parquet - Objects must be in CSV, JSON, or Parquet format.    UTF-8 - UTF-8 is the only encoding type Amazon S3 Select supports.    GZIP or BZIP2 - CSV and JSON files can be compressed using GZIP or BZIP2. GZIP and BZIP2 are the only compression formats that Amazon S3 Select supports for CSV and JSON files. Amazon S3 Select supports columnar compression for Parquet using GZIP or Snappy. Amazon S3 Select does not support whole-object compression for Parquet objects.    Server-side encryption - Amazon S3 Select supports querying objects that are protected with server-side encryption. For objects that are encrypted with customer-provided encryption keys (SSE-C), you must use HTTPS, and you must use the headers that are documented in the GetObject. For more information about SSE-C, see Server-Side Encryption (Using Customer-Provided Encryption Keys) in the Amazon S3 User Guide. For objects that are encrypted with Amazon S3 managed keys (SSE-S3) and Amazon Web Services KMS keys (SSE-KMS), server-side encryption is handled transparently, so you don't need to specify anything. For more information about server-side encryption, including SSE-S3 and SSE-KMS, see Protecting Data Using Server-Side Encryption in the Amazon S3 User Guide.    Working with the Response Body  Given the response size is unknown, Amazon S3 Select streams the response as a series of messages and includes a Transfer-Encoding header with chunked as its value in the response. For more information, see Appendix: SelectObjectContent Response.  GetObject Support  The SelectObjectContent action does not support the following GetObject functionality. For more information, see GetObject.    Range: Although you can specify a scan range for an Amazon S3 Select request (see SelectObjectContentRequest - ScanRange in the request parameters), you cannot specify the range of bytes of an object to return.    The GLACIER, DEEP_ARCHIVE, and REDUCED_REDUNDANCY storage classes, or the ARCHIVE_ACCESS and DEEP_ARCHIVE_ACCESS access tiers of the INTELLIGENT_TIERING storage class: You cannot query objects in the GLACIER, DEEP_ARCHIVE, or REDUCED_REDUNDANCY storage classes, nor objects in the ARCHIVE_ACCESS or DEEP_ARCHIVE_ACCESS access tiers of the INTELLIGENT_TIERING storage class. For more information about storage classes, see Using Amazon S3 storage classes in the Amazon S3 User Guide.    Special Errors  For a list of special errors for this operation, see List of SELECT Object Content Error Codes    The following operations are related to SelectObjectContent:    GetObject     GetBucketLifecycleConfiguration     PutBucketLifecycleConfiguration   
    */
   selectObjectContent(callback?: (err: AWSError, data: S3.Types.SelectObjectContentOutput) => void): Request<S3.Types.SelectObjectContentOutput, AWSError>;
   /**
-   * Uploads a part in a multipart upload.  In this operation, you provide new data as a part of an object in your request. However, you have an option to specify your existing Amazon S3 object as a data source for the part you are uploading. To upload a part from an existing object, you use the UploadPartCopy operation.   You must initiate a multipart upload (see CreateMultipartUpload) before you can upload any part. In response to your initiate request, Amazon S3 returns an upload ID, a unique identifier that you must include in your upload part request. Part numbers can be any number from 1 to 10,000, inclusive. A part number uniquely identifies a part and also defines its position within the object being created. If you upload a new part using the same part number that was used with a previous part, the previously uploaded part is overwritten. For information about maximum and minimum part sizes and other multipart upload specifications, see Multipart upload limits in the Amazon S3 User Guide.  After you initiate multipart upload and upload one or more parts, you must either complete or abort multipart upload in order to stop getting charged for storage of the uploaded parts. Only after you either complete or abort multipart upload, Amazon S3 frees up the parts storage and stops charging you for the parts storage.  For more information on multipart uploads, go to Multipart Upload Overview in the Amazon S3 User Guide .   Directory buckets - For directory buckets, you must make requests for this API operation to the Zonal endpoint. These endpoints support virtual-hosted-style requests in the format https://bucket_name.s3express-az_id.region.amazonaws.com/key-name . Path-style requests are not supported. For more information, see Regional and Zonal endpoints in the Amazon S3 User Guide.   Permissions     General purpose bucket permissions - To perform a multipart upload with encryption using an Key Management Service key, the requester must have permission to the kms:Decrypt and kms:GenerateDataKey actions on the key. The requester must also have permissions for the kms:GenerateDataKey action for the CreateMultipartUpload API. Then, the requester needs permissions for the kms:Decrypt action on the UploadPart and UploadPartCopy APIs. These permissions are required because Amazon S3 must decrypt and read data from the encrypted file parts before it completes the multipart upload. For more information about KMS permissions, see Protecting data using server-side encryption with KMS in the Amazon S3 User Guide. For information about the permissions required to use the multipart upload API, see Multipart upload and permissions and Multipart upload API and permissions in the Amazon S3 User Guide.    Directory bucket permissions - To grant access to this API operation on a directory bucket, we recommend that you use the  CreateSession  API operation for session-based authorization. Specifically, you grant the s3express:CreateSession permission to the directory bucket in a bucket policy or an IAM identity-based policy. Then, you make the CreateSession API call on the bucket to obtain a session token. With the session token in your request header, you can make API requests to this operation. After the session token expires, you make another CreateSession API call to generate a new session token for use. Amazon Web Services CLI or SDKs create session and refresh the session token automatically to avoid service interruptions when a session expires. For more information about authorization, see  CreateSession .    Data integrity   General purpose bucket - To ensure that data is not corrupted traversing the network, specify the Content-MD5 header in the upload part request. Amazon S3 checks the part data against the provided MD5 value. If they do not match, Amazon S3 returns an error. If the upload request is signed with Signature Version 4, then Amazon Web Services S3 uses the x-amz-content-sha256 header as a checksum instead of Content-MD5. For more information see Authenticating Requests: Using the Authorization Header (Amazon Web Services Signature Version 4).    Directory buckets - MD5 is not supported by directory buckets. You can use checksum algorithms to check object integrity.   Encryption     General purpose bucket - Server-side encryption is for data encryption at rest. Amazon S3 encrypts your data as it writes it to disks in its data centers and decrypts it when you access it. You have mutually exclusive options to protect data using server-side encryption in Amazon S3, depending on how you choose to manage the encryption keys. Specifically, the encryption key options are Amazon S3 managed keys (SSE-S3), Amazon Web Services KMS keys (SSE-KMS), and Customer-Provided Keys (SSE-C). Amazon S3 encrypts data with server-side encryption using Amazon S3 managed keys (SSE-S3) by default. You can optionally tell Amazon S3 to encrypt data at rest using server-side encryption with other key options. The option you use depends on whether you want to use KMS keys (SSE-KMS) or provide your own encryption key (SSE-C). Server-side encryption is supported by the S3 Multipart Upload operations. Unless you are using a customer-provided encryption key (SSE-C), you don't need to specify the encryption parameters in each UploadPart request. Instead, you only need to specify the server-side encryption parameters in the initial Initiate Multipart request. For more information, see CreateMultipartUpload. If you request server-side encryption using a customer-provided encryption key (SSE-C) in your initiate multipart upload request, you must provide identical encryption information in each part upload using the following request headers.   x-amz-server-side-encryption-customer-algorithm   x-amz-server-side-encryption-customer-key   x-amz-server-side-encryption-customer-key-MD5      Directory bucket - For directory buckets, only server-side encryption with Amazon S3 managed keys (SSE-S3) (AES256) is supported.     For more information, see Using Server-Side Encryption in the Amazon S3 User Guide.  Special errors    Error Code: NoSuchUpload    Description: The specified multipart upload does not exist. The upload ID might be invalid, or the multipart upload might have been aborted or completed.   HTTP Status Code: 404 Not Found    SOAP Fault Code Prefix: Client      HTTP Host header syntax   Directory buckets  - The HTTP Host header syntax is  Bucket_name.s3express-az_id.region.amazonaws.com.   The following operations are related to UploadPart:    CreateMultipartUpload     CompleteMultipartUpload     AbortMultipartUpload     ListParts     ListMultipartUploads   
+   * Uploads a part in a multipart upload.  In this operation, you provide new data as a part of an object in your request. However, you have an option to specify your existing Amazon S3 object as a data source for the part you are uploading. To upload a part from an existing object, you use the UploadPartCopy operation.   You must initiate a multipart upload (see CreateMultipartUpload) before you can upload any part. In response to your initiate request, Amazon S3 returns an upload ID, a unique identifier that you must include in your upload part request. Part numbers can be any number from 1 to 10,000, inclusive. A part number uniquely identifies a part and also defines its position within the object being created. If you upload a new part using the same part number that was used with a previous part, the previously uploaded part is overwritten. For information about maximum and minimum part sizes and other multipart upload specifications, see Multipart upload limits in the Amazon S3 User Guide.  After you initiate multipart upload and upload one or more parts, you must either complete or abort multipart upload in order to stop getting charged for storage of the uploaded parts. Only after you either complete or abort multipart upload, Amazon S3 frees up the parts storage and stops charging you for the parts storage.  For more information on multipart uploads, go to Multipart Upload Overview in the Amazon S3 User Guide .   Directory buckets - For directory buckets, you must make requests for this API operation to the Zonal endpoint. These endpoints support virtual-hosted-style requests in the format https://bucket_name.s3express-az_id.region.amazonaws.com/key-name . Path-style requests are not supported. For more information, see Regional and Zonal endpoints in the Amazon S3 User Guide.   Permissions     General purpose bucket permissions - To perform a multipart upload with encryption using an Key Management Service key, the requester must have permission to the kms:Decrypt and kms:GenerateDataKey actions on the key. The requester must also have permissions for the kms:GenerateDataKey action for the CreateMultipartUpload API. Then, the requester needs permissions for the kms:Decrypt action on the UploadPart and UploadPartCopy APIs. These permissions are required because Amazon S3 must decrypt and read data from the encrypted file parts before it completes the multipart upload. For more information about KMS permissions, see Protecting data using server-side encryption with KMS in the Amazon S3 User Guide. For information about the permissions required to use the multipart upload API, see Multipart upload and permissions and Multipart upload API and permissions in the Amazon S3 User Guide.    Directory bucket permissions - To grant access to this API operation on a directory bucket, we recommend that you use the  CreateSession  API operation for session-based authorization. Specifically, you grant the s3express:CreateSession permission to the directory bucket in a bucket policy or an IAM identity-based policy. Then, you make the CreateSession API call on the bucket to obtain a session token. With the session token in your request header, you can make API requests to this operation. After the session token expires, you make another CreateSession API call to generate a new session token for use. Amazon Web Services CLI or SDKs create session and refresh the session token automatically to avoid service interruptions when a session expires. For more information about authorization, see  CreateSession . If the object is encrypted with SSE-KMS, you must also have the kms:GenerateDataKey and kms:Decrypt permissions in IAM identity-based policies and KMS key policies for the KMS key.    Data integrity   General purpose bucket - To ensure that data is not corrupted traversing the network, specify the Content-MD5 header in the upload part request. Amazon S3 checks the part data against the provided MD5 value. If they do not match, Amazon S3 returns an error. If the upload request is signed with Signature Version 4, then Amazon Web Services S3 uses the x-amz-content-sha256 header as a checksum instead of Content-MD5. For more information see Authenticating Requests: Using the Authorization Header (Amazon Web Services Signature Version 4).    Directory buckets - MD5 is not supported by directory buckets. You can use checksum algorithms to check object integrity.   Encryption     General purpose bucket - Server-side encryption is for data encryption at rest. Amazon S3 encrypts your data as it writes it to disks in its data centers and decrypts it when you access it. You have mutually exclusive options to protect data using server-side encryption in Amazon S3, depending on how you choose to manage the encryption keys. Specifically, the encryption key options are Amazon S3 managed keys (SSE-S3), Amazon Web Services KMS keys (SSE-KMS), and Customer-Provided Keys (SSE-C). Amazon S3 encrypts data with server-side encryption using Amazon S3 managed keys (SSE-S3) by default. You can optionally tell Amazon S3 to encrypt data at rest using server-side encryption with other key options. The option you use depends on whether you want to use KMS keys (SSE-KMS) or provide your own encryption key (SSE-C). Server-side encryption is supported by the S3 Multipart Upload operations. Unless you are using a customer-provided encryption key (SSE-C), you don't need to specify the encryption parameters in each UploadPart request. Instead, you only need to specify the server-side encryption parameters in the initial Initiate Multipart request. For more information, see CreateMultipartUpload. If you request server-side encryption using a customer-provided encryption key (SSE-C) in your initiate multipart upload request, you must provide identical encryption information in each part upload using the following request headers.   x-amz-server-side-encryption-customer-algorithm   x-amz-server-side-encryption-customer-key   x-amz-server-side-encryption-customer-key-MD5    For more information, see Using Server-Side Encryption in the Amazon S3 User Guide.    Directory buckets  - For directory buckets, there are only two supported options for server-side encryption: server-side encryption with Amazon S3 managed keys (SSE-S3) (AES256) and server-side encryption with KMS keys (SSE-KMS) (aws:kms).    Special errors    Error Code: NoSuchUpload    Description: The specified multipart upload does not exist. The upload ID might be invalid, or the multipart upload might have been aborted or completed.   HTTP Status Code: 404 Not Found    SOAP Fault Code Prefix: Client      HTTP Host header syntax   Directory buckets  - The HTTP Host header syntax is  Bucket_name.s3express-az_id.region.amazonaws.com.   The following operations are related to UploadPart:    CreateMultipartUpload     CompleteMultipartUpload     AbortMultipartUpload     ListParts     ListMultipartUploads   
    */
   uploadPart(params: S3.Types.UploadPartRequest, callback?: (err: AWSError, data: S3.Types.UploadPartOutput) => void): Request<S3.Types.UploadPartOutput, AWSError>;
   /**
-   * Uploads a part in a multipart upload.  In this operation, you provide new data as a part of an object in your request. However, you have an option to specify your existing Amazon S3 object as a data source for the part you are uploading. To upload a part from an existing object, you use the UploadPartCopy operation.   You must initiate a multipart upload (see CreateMultipartUpload) before you can upload any part. In response to your initiate request, Amazon S3 returns an upload ID, a unique identifier that you must include in your upload part request. Part numbers can be any number from 1 to 10,000, inclusive. A part number uniquely identifies a part and also defines its position within the object being created. If you upload a new part using the same part number that was used with a previous part, the previously uploaded part is overwritten. For information about maximum and minimum part sizes and other multipart upload specifications, see Multipart upload limits in the Amazon S3 User Guide.  After you initiate multipart upload and upload one or more parts, you must either complete or abort multipart upload in order to stop getting charged for storage of the uploaded parts. Only after you either complete or abort multipart upload, Amazon S3 frees up the parts storage and stops charging you for the parts storage.  For more information on multipart uploads, go to Multipart Upload Overview in the Amazon S3 User Guide .   Directory buckets - For directory buckets, you must make requests for this API operation to the Zonal endpoint. These endpoints support virtual-hosted-style requests in the format https://bucket_name.s3express-az_id.region.amazonaws.com/key-name . Path-style requests are not supported. For more information, see Regional and Zonal endpoints in the Amazon S3 User Guide.   Permissions     General purpose bucket permissions - To perform a multipart upload with encryption using an Key Management Service key, the requester must have permission to the kms:Decrypt and kms:GenerateDataKey actions on the key. The requester must also have permissions for the kms:GenerateDataKey action for the CreateMultipartUpload API. Then, the requester needs permissions for the kms:Decrypt action on the UploadPart and UploadPartCopy APIs. These permissions are required because Amazon S3 must decrypt and read data from the encrypted file parts before it completes the multipart upload. For more information about KMS permissions, see Protecting data using server-side encryption with KMS in the Amazon S3 User Guide. For information about the permissions required to use the multipart upload API, see Multipart upload and permissions and Multipart upload API and permissions in the Amazon S3 User Guide.    Directory bucket permissions - To grant access to this API operation on a directory bucket, we recommend that you use the  CreateSession  API operation for session-based authorization. Specifically, you grant the s3express:CreateSession permission to the directory bucket in a bucket policy or an IAM identity-based policy. Then, you make the CreateSession API call on the bucket to obtain a session token. With the session token in your request header, you can make API requests to this operation. After the session token expires, you make another CreateSession API call to generate a new session token for use. Amazon Web Services CLI or SDKs create session and refresh the session token automatically to avoid service interruptions when a session expires. For more information about authorization, see  CreateSession .    Data integrity   General purpose bucket - To ensure that data is not corrupted traversing the network, specify the Content-MD5 header in the upload part request. Amazon S3 checks the part data against the provided MD5 value. If they do not match, Amazon S3 returns an error. If the upload request is signed with Signature Version 4, then Amazon Web Services S3 uses the x-amz-content-sha256 header as a checksum instead of Content-MD5. For more information see Authenticating Requests: Using the Authorization Header (Amazon Web Services Signature Version 4).    Directory buckets - MD5 is not supported by directory buckets. You can use checksum algorithms to check object integrity.   Encryption     General purpose bucket - Server-side encryption is for data encryption at rest. Amazon S3 encrypts your data as it writes it to disks in its data centers and decrypts it when you access it. You have mutually exclusive options to protect data using server-side encryption in Amazon S3, depending on how you choose to manage the encryption keys. Specifically, the encryption key options are Amazon S3 managed keys (SSE-S3), Amazon Web Services KMS keys (SSE-KMS), and Customer-Provided Keys (SSE-C). Amazon S3 encrypts data with server-side encryption using Amazon S3 managed keys (SSE-S3) by default. You can optionally tell Amazon S3 to encrypt data at rest using server-side encryption with other key options. The option you use depends on whether you want to use KMS keys (SSE-KMS) or provide your own encryption key (SSE-C). Server-side encryption is supported by the S3 Multipart Upload operations. Unless you are using a customer-provided encryption key (SSE-C), you don't need to specify the encryption parameters in each UploadPart request. Instead, you only need to specify the server-side encryption parameters in the initial Initiate Multipart request. For more information, see CreateMultipartUpload. If you request server-side encryption using a customer-provided encryption key (SSE-C) in your initiate multipart upload request, you must provide identical encryption information in each part upload using the following request headers.   x-amz-server-side-encryption-customer-algorithm   x-amz-server-side-encryption-customer-key   x-amz-server-side-encryption-customer-key-MD5      Directory bucket - For directory buckets, only server-side encryption with Amazon S3 managed keys (SSE-S3) (AES256) is supported.     For more information, see Using Server-Side Encryption in the Amazon S3 User Guide.  Special errors    Error Code: NoSuchUpload    Description: The specified multipart upload does not exist. The upload ID might be invalid, or the multipart upload might have been aborted or completed.   HTTP Status Code: 404 Not Found    SOAP Fault Code Prefix: Client      HTTP Host header syntax   Directory buckets  - The HTTP Host header syntax is  Bucket_name.s3express-az_id.region.amazonaws.com.   The following operations are related to UploadPart:    CreateMultipartUpload     CompleteMultipartUpload     AbortMultipartUpload     ListParts     ListMultipartUploads   
+   * Uploads a part in a multipart upload.  In this operation, you provide new data as a part of an object in your request. However, you have an option to specify your existing Amazon S3 object as a data source for the part you are uploading. To upload a part from an existing object, you use the UploadPartCopy operation.   You must initiate a multipart upload (see CreateMultipartUpload) before you can upload any part. In response to your initiate request, Amazon S3 returns an upload ID, a unique identifier that you must include in your upload part request. Part numbers can be any number from 1 to 10,000, inclusive. A part number uniquely identifies a part and also defines its position within the object being created. If you upload a new part using the same part number that was used with a previous part, the previously uploaded part is overwritten. For information about maximum and minimum part sizes and other multipart upload specifications, see Multipart upload limits in the Amazon S3 User Guide.  After you initiate multipart upload and upload one or more parts, you must either complete or abort multipart upload in order to stop getting charged for storage of the uploaded parts. Only after you either complete or abort multipart upload, Amazon S3 frees up the parts storage and stops charging you for the parts storage.  For more information on multipart uploads, go to Multipart Upload Overview in the Amazon S3 User Guide .   Directory buckets - For directory buckets, you must make requests for this API operation to the Zonal endpoint. These endpoints support virtual-hosted-style requests in the format https://bucket_name.s3express-az_id.region.amazonaws.com/key-name . Path-style requests are not supported. For more information, see Regional and Zonal endpoints in the Amazon S3 User Guide.   Permissions     General purpose bucket permissions - To perform a multipart upload with encryption using an Key Management Service key, the requester must have permission to the kms:Decrypt and kms:GenerateDataKey actions on the key. The requester must also have permissions for the kms:GenerateDataKey action for the CreateMultipartUpload API. Then, the requester needs permissions for the kms:Decrypt action on the UploadPart and UploadPartCopy APIs. These permissions are required because Amazon S3 must decrypt and read data from the encrypted file parts before it completes the multipart upload. For more information about KMS permissions, see Protecting data using server-side encryption with KMS in the Amazon S3 User Guide. For information about the permissions required to use the multipart upload API, see Multipart upload and permissions and Multipart upload API and permissions in the Amazon S3 User Guide.    Directory bucket permissions - To grant access to this API operation on a directory bucket, we recommend that you use the  CreateSession  API operation for session-based authorization. Specifically, you grant the s3express:CreateSession permission to the directory bucket in a bucket policy or an IAM identity-based policy. Then, you make the CreateSession API call on the bucket to obtain a session token. With the session token in your request header, you can make API requests to this operation. After the session token expires, you make another CreateSession API call to generate a new session token for use. Amazon Web Services CLI or SDKs create session and refresh the session token automatically to avoid service interruptions when a session expires. For more information about authorization, see  CreateSession . If the object is encrypted with SSE-KMS, you must also have the kms:GenerateDataKey and kms:Decrypt permissions in IAM identity-based policies and KMS key policies for the KMS key.    Data integrity   General purpose bucket - To ensure that data is not corrupted traversing the network, specify the Content-MD5 header in the upload part request. Amazon S3 checks the part data against the provided MD5 value. If they do not match, Amazon S3 returns an error. If the upload request is signed with Signature Version 4, then Amazon Web Services S3 uses the x-amz-content-sha256 header as a checksum instead of Content-MD5. For more information see Authenticating Requests: Using the Authorization Header (Amazon Web Services Signature Version 4).    Directory buckets - MD5 is not supported by directory buckets. You can use checksum algorithms to check object integrity.   Encryption     General purpose bucket - Server-side encryption is for data encryption at rest. Amazon S3 encrypts your data as it writes it to disks in its data centers and decrypts it when you access it. You have mutually exclusive options to protect data using server-side encryption in Amazon S3, depending on how you choose to manage the encryption keys. Specifically, the encryption key options are Amazon S3 managed keys (SSE-S3), Amazon Web Services KMS keys (SSE-KMS), and Customer-Provided Keys (SSE-C). Amazon S3 encrypts data with server-side encryption using Amazon S3 managed keys (SSE-S3) by default. You can optionally tell Amazon S3 to encrypt data at rest using server-side encryption with other key options. The option you use depends on whether you want to use KMS keys (SSE-KMS) or provide your own encryption key (SSE-C). Server-side encryption is supported by the S3 Multipart Upload operations. Unless you are using a customer-provided encryption key (SSE-C), you don't need to specify the encryption parameters in each UploadPart request. Instead, you only need to specify the server-side encryption parameters in the initial Initiate Multipart request. For more information, see CreateMultipartUpload. If you request server-side encryption using a customer-provided encryption key (SSE-C) in your initiate multipart upload request, you must provide identical encryption information in each part upload using the following request headers.   x-amz-server-side-encryption-customer-algorithm   x-amz-server-side-encryption-customer-key   x-amz-server-side-encryption-customer-key-MD5    For more information, see Using Server-Side Encryption in the Amazon S3 User Guide.    Directory buckets  - For directory buckets, there are only two supported options for server-side encryption: server-side encryption with Amazon S3 managed keys (SSE-S3) (AES256) and server-side encryption with KMS keys (SSE-KMS) (aws:kms).    Special errors    Error Code: NoSuchUpload    Description: The specified multipart upload does not exist. The upload ID might be invalid, or the multipart upload might have been aborted or completed.   HTTP Status Code: 404 Not Found    SOAP Fault Code Prefix: Client      HTTP Host header syntax   Directory buckets  - The HTTP Host header syntax is  Bucket_name.s3express-az_id.region.amazonaws.com.   The following operations are related to UploadPart:    CreateMultipartUpload     CompleteMultipartUpload     AbortMultipartUpload     ListParts     ListMultipartUploads   
    */
   uploadPart(callback?: (err: AWSError, data: S3.Types.UploadPartOutput) => void): Request<S3.Types.UploadPartOutput, AWSError>;
   /**
-   * Uploads a part by copying data from an existing object as data source. To specify the data source, you add the request header x-amz-copy-source in your request. To specify a byte range, you add the request header x-amz-copy-source-range in your request.  For information about maximum and minimum part sizes and other multipart upload specifications, see Multipart upload limits in the Amazon S3 User Guide.   Instead of copying data from an existing object as part data, you might use the UploadPart action to upload new data as a part of an object in your request.  You must initiate a multipart upload before you can upload any part. In response to your initiate request, Amazon S3 returns the upload ID, a unique identifier that you must include in your upload part request. For conceptual information about multipart uploads, see Uploading Objects Using Multipart Upload in the Amazon S3 User Guide. For information about copying objects using a single atomic action vs. a multipart upload, see Operations on Objects in the Amazon S3 User Guide.   Directory buckets - For directory buckets, you must make requests for this API operation to the Zonal endpoint. These endpoints support virtual-hosted-style requests in the format https://bucket_name.s3express-az_id.region.amazonaws.com/key-name . Path-style requests are not supported. For more information, see Regional and Zonal endpoints in the Amazon S3 User Guide.   Authentication and authorization  All UploadPartCopy requests must be authenticated and signed by using IAM credentials (access key ID and secret access key for the IAM identities). All headers with the x-amz- prefix, including x-amz-copy-source, must be signed. For more information, see REST Authentication.  Directory buckets - You must use IAM credentials to authenticate and authorize your access to the UploadPartCopy API operation, instead of using the temporary security credentials through the CreateSession API operation. Amazon Web Services CLI or SDKs handles authentication and authorization on your behalf.  Permissions  You must have READ access to the source object and WRITE access to the destination bucket.    General purpose bucket permissions - You must have the permissions in a policy based on the bucket types of your source bucket and destination bucket in an UploadPartCopy operation.   If the source object is in a general purpose bucket, you must have the  s3:GetObject  permission to read the source object that is being copied.    If the destination bucket is a general purpose bucket, you must have the  s3:PutObject  permission to write the object copy to the destination bucket.    To perform a multipart upload with encryption using an Key Management Service key, the requester must have permission to the kms:Decrypt and kms:GenerateDataKey actions on the key. The requester must also have permissions for the kms:GenerateDataKey action for the CreateMultipartUpload API. Then, the requester needs permissions for the kms:Decrypt action on the UploadPart and UploadPartCopy APIs. These permissions are required because Amazon S3 must decrypt and read data from the encrypted file parts before it completes the multipart upload. For more information about KMS permissions, see Protecting data using server-side encryption with KMS in the Amazon S3 User Guide. For information about the permissions required to use the multipart upload API, see Multipart upload and permissions and Multipart upload API and permissions in the Amazon S3 User Guide.      Directory bucket permissions - You must have permissions in a bucket policy or an IAM identity-based policy based on the source and destination bucket types in an UploadPartCopy operation.   If the source object that you want to copy is in a directory bucket, you must have the  s3express:CreateSession  permission in the Action element of a policy to read the object. By default, the session is in the ReadWrite mode. If you want to restrict the access, you can explicitly set the s3express:SessionMode condition key to ReadOnly on the copy source bucket.   If the copy destination is a directory bucket, you must have the  s3express:CreateSession  permission in the Action element of a policy to write the object to the destination. The s3express:SessionMode condition key cannot be set to ReadOnly on the copy destination.    For example policies, see Example bucket policies for S3 Express One Zone and Amazon Web Services Identity and Access Management (IAM) identity-based policies for S3 Express One Zone in the Amazon S3 User Guide.    Encryption     General purpose buckets  - For information about using server-side encryption with customer-provided encryption keys with the UploadPartCopy operation, see CopyObject and UploadPart.     Directory buckets  - For directory buckets, only server-side encryption with Amazon S3 managed keys (SSE-S3) (AES256) is supported.    Special errors    Error Code: NoSuchUpload    Description: The specified multipart upload does not exist. The upload ID might be invalid, or the multipart upload might have been aborted or completed.   HTTP Status Code: 404 Not Found     Error Code: InvalidRequest    Description: The specified copy source is not supported as a byte-range copy source.   HTTP Status Code: 400 Bad Request      HTTP Host header syntax   Directory buckets  - The HTTP Host header syntax is  Bucket_name.s3express-az_id.region.amazonaws.com.   The following operations are related to UploadPartCopy:    CreateMultipartUpload     UploadPart     CompleteMultipartUpload     AbortMultipartUpload     ListParts     ListMultipartUploads   
+   * Uploads a part by copying data from an existing object as data source. To specify the data source, you add the request header x-amz-copy-source in your request. To specify a byte range, you add the request header x-amz-copy-source-range in your request.  For information about maximum and minimum part sizes and other multipart upload specifications, see Multipart upload limits in the Amazon S3 User Guide.   Instead of copying data from an existing object as part data, you might use the UploadPart action to upload new data as a part of an object in your request.  You must initiate a multipart upload before you can upload any part. In response to your initiate request, Amazon S3 returns the upload ID, a unique identifier that you must include in your upload part request. For conceptual information about multipart uploads, see Uploading Objects Using Multipart Upload in the Amazon S3 User Guide. For information about copying objects using a single atomic action vs. a multipart upload, see Operations on Objects in the Amazon S3 User Guide.   Directory buckets - For directory buckets, you must make requests for this API operation to the Zonal endpoint. These endpoints support virtual-hosted-style requests in the format https://bucket_name.s3express-az_id.region.amazonaws.com/key-name . Path-style requests are not supported. For more information, see Regional and Zonal endpoints in the Amazon S3 User Guide.   Authentication and authorization  All UploadPartCopy requests must be authenticated and signed by using IAM credentials (access key ID and secret access key for the IAM identities). All headers with the x-amz- prefix, including x-amz-copy-source, must be signed. For more information, see REST Authentication.  Directory buckets - You must use IAM credentials to authenticate and authorize your access to the UploadPartCopy API operation, instead of using the temporary security credentials through the CreateSession API operation. Amazon Web Services CLI or SDKs handles authentication and authorization on your behalf.  Permissions  You must have READ access to the source object and WRITE access to the destination bucket.    General purpose bucket permissions - You must have the permissions in a policy based on the bucket types of your source bucket and destination bucket in an UploadPartCopy operation.   If the source object is in a general purpose bucket, you must have the  s3:GetObject  permission to read the source object that is being copied.    If the destination bucket is a general purpose bucket, you must have the  s3:PutObject  permission to write the object copy to the destination bucket.    To perform a multipart upload with encryption using an Key Management Service key, the requester must have permission to the kms:Decrypt and kms:GenerateDataKey actions on the key. The requester must also have permissions for the kms:GenerateDataKey action for the CreateMultipartUpload API. Then, the requester needs permissions for the kms:Decrypt action on the UploadPart and UploadPartCopy APIs. These permissions are required because Amazon S3 must decrypt and read data from the encrypted file parts before it completes the multipart upload. For more information about KMS permissions, see Protecting data using server-side encryption with KMS in the Amazon S3 User Guide. For information about the permissions required to use the multipart upload API, see Multipart upload and permissions and Multipart upload API and permissions in the Amazon S3 User Guide.      Directory bucket permissions - You must have permissions in a bucket policy or an IAM identity-based policy based on the source and destination bucket types in an UploadPartCopy operation.   If the source object that you want to copy is in a directory bucket, you must have the  s3express:CreateSession  permission in the Action element of a policy to read the object. By default, the session is in the ReadWrite mode. If you want to restrict the access, you can explicitly set the s3express:SessionMode condition key to ReadOnly on the copy source bucket.   If the copy destination is a directory bucket, you must have the  s3express:CreateSession  permission in the Action element of a policy to write the object to the destination. The s3express:SessionMode condition key cannot be set to ReadOnly on the copy destination.    If the object is encrypted with SSE-KMS, you must also have the kms:GenerateDataKey and kms:Decrypt permissions in IAM identity-based policies and KMS key policies for the KMS key. For example policies, see Example bucket policies for S3 Express One Zone and Amazon Web Services Identity and Access Management (IAM) identity-based policies for S3 Express One Zone in the Amazon S3 User Guide.    Encryption     General purpose buckets  - For information about using server-side encryption with customer-provided encryption keys with the UploadPartCopy operation, see CopyObject and UploadPart.     Directory buckets  - For directory buckets, there are only two supported options for server-side encryption: server-side encryption with Amazon S3 managed keys (SSE-S3) (AES256) and server-side encryption with KMS keys (SSE-KMS) (aws:kms). For more information, see Protecting data with server-side encryption in the Amazon S3 User Guide.  For directory buckets, when you perform a CreateMultipartUpload operation and an UploadPartCopy operation, the request headers you provide in the CreateMultipartUpload request must match the default encryption configuration of the destination bucket.   S3 Bucket Keys aren't supported, when you copy SSE-KMS encrypted objects from general purpose buckets to directory buckets, from directory buckets to general purpose buckets, or between directory buckets, through UploadPartCopy. In this case, Amazon S3 makes a call to KMS every time a copy request is made for a KMS-encrypted object.    Special errors    Error Code: NoSuchUpload    Description: The specified multipart upload does not exist. The upload ID might be invalid, or the multipart upload might have been aborted or completed.   HTTP Status Code: 404 Not Found     Error Code: InvalidRequest    Description: The specified copy source is not supported as a byte-range copy source.   HTTP Status Code: 400 Bad Request      HTTP Host header syntax   Directory buckets  - The HTTP Host header syntax is  Bucket_name.s3express-az_id.region.amazonaws.com.   The following operations are related to UploadPartCopy:    CreateMultipartUpload     UploadPart     CompleteMultipartUpload     AbortMultipartUpload     ListParts     ListMultipartUploads   
    */
   uploadPartCopy(params: S3.Types.UploadPartCopyRequest, callback?: (err: AWSError, data: S3.Types.UploadPartCopyOutput) => void): Request<S3.Types.UploadPartCopyOutput, AWSError>;
   /**
-   * Uploads a part by copying data from an existing object as data source. To specify the data source, you add the request header x-amz-copy-source in your request. To specify a byte range, you add the request header x-amz-copy-source-range in your request.  For information about maximum and minimum part sizes and other multipart upload specifications, see Multipart upload limits in the Amazon S3 User Guide.   Instead of copying data from an existing object as part data, you might use the UploadPart action to upload new data as a part of an object in your request.  You must initiate a multipart upload before you can upload any part. In response to your initiate request, Amazon S3 returns the upload ID, a unique identifier that you must include in your upload part request. For conceptual information about multipart uploads, see Uploading Objects Using Multipart Upload in the Amazon S3 User Guide. For information about copying objects using a single atomic action vs. a multipart upload, see Operations on Objects in the Amazon S3 User Guide.   Directory buckets - For directory buckets, you must make requests for this API operation to the Zonal endpoint. These endpoints support virtual-hosted-style requests in the format https://bucket_name.s3express-az_id.region.amazonaws.com/key-name . Path-style requests are not supported. For more information, see Regional and Zonal endpoints in the Amazon S3 User Guide.   Authentication and authorization  All UploadPartCopy requests must be authenticated and signed by using IAM credentials (access key ID and secret access key for the IAM identities). All headers with the x-amz- prefix, including x-amz-copy-source, must be signed. For more information, see REST Authentication.  Directory buckets - You must use IAM credentials to authenticate and authorize your access to the UploadPartCopy API operation, instead of using the temporary security credentials through the CreateSession API operation. Amazon Web Services CLI or SDKs handles authentication and authorization on your behalf.  Permissions  You must have READ access to the source object and WRITE access to the destination bucket.    General purpose bucket permissions - You must have the permissions in a policy based on the bucket types of your source bucket and destination bucket in an UploadPartCopy operation.   If the source object is in a general purpose bucket, you must have the  s3:GetObject  permission to read the source object that is being copied.    If the destination bucket is a general purpose bucket, you must have the  s3:PutObject  permission to write the object copy to the destination bucket.    To perform a multipart upload with encryption using an Key Management Service key, the requester must have permission to the kms:Decrypt and kms:GenerateDataKey actions on the key. The requester must also have permissions for the kms:GenerateDataKey action for the CreateMultipartUpload API. Then, the requester needs permissions for the kms:Decrypt action on the UploadPart and UploadPartCopy APIs. These permissions are required because Amazon S3 must decrypt and read data from the encrypted file parts before it completes the multipart upload. For more information about KMS permissions, see Protecting data using server-side encryption with KMS in the Amazon S3 User Guide. For information about the permissions required to use the multipart upload API, see Multipart upload and permissions and Multipart upload API and permissions in the Amazon S3 User Guide.      Directory bucket permissions - You must have permissions in a bucket policy or an IAM identity-based policy based on the source and destination bucket types in an UploadPartCopy operation.   If the source object that you want to copy is in a directory bucket, you must have the  s3express:CreateSession  permission in the Action element of a policy to read the object. By default, the session is in the ReadWrite mode. If you want to restrict the access, you can explicitly set the s3express:SessionMode condition key to ReadOnly on the copy source bucket.   If the copy destination is a directory bucket, you must have the  s3express:CreateSession  permission in the Action element of a policy to write the object to the destination. The s3express:SessionMode condition key cannot be set to ReadOnly on the copy destination.    For example policies, see Example bucket policies for S3 Express One Zone and Amazon Web Services Identity and Access Management (IAM) identity-based policies for S3 Express One Zone in the Amazon S3 User Guide.    Encryption     General purpose buckets  - For information about using server-side encryption with customer-provided encryption keys with the UploadPartCopy operation, see CopyObject and UploadPart.     Directory buckets  - For directory buckets, only server-side encryption with Amazon S3 managed keys (SSE-S3) (AES256) is supported.    Special errors    Error Code: NoSuchUpload    Description: The specified multipart upload does not exist. The upload ID might be invalid, or the multipart upload might have been aborted or completed.   HTTP Status Code: 404 Not Found     Error Code: InvalidRequest    Description: The specified copy source is not supported as a byte-range copy source.   HTTP Status Code: 400 Bad Request      HTTP Host header syntax   Directory buckets  - The HTTP Host header syntax is  Bucket_name.s3express-az_id.region.amazonaws.com.   The following operations are related to UploadPartCopy:    CreateMultipartUpload     UploadPart     CompleteMultipartUpload     AbortMultipartUpload     ListParts     ListMultipartUploads   
+   * Uploads a part by copying data from an existing object as data source. To specify the data source, you add the request header x-amz-copy-source in your request. To specify a byte range, you add the request header x-amz-copy-source-range in your request.  For information about maximum and minimum part sizes and other multipart upload specifications, see Multipart upload limits in the Amazon S3 User Guide.   Instead of copying data from an existing object as part data, you might use the UploadPart action to upload new data as a part of an object in your request.  You must initiate a multipart upload before you can upload any part. In response to your initiate request, Amazon S3 returns the upload ID, a unique identifier that you must include in your upload part request. For conceptual information about multipart uploads, see Uploading Objects Using Multipart Upload in the Amazon S3 User Guide. For information about copying objects using a single atomic action vs. a multipart upload, see Operations on Objects in the Amazon S3 User Guide.   Directory buckets - For directory buckets, you must make requests for this API operation to the Zonal endpoint. These endpoints support virtual-hosted-style requests in the format https://bucket_name.s3express-az_id.region.amazonaws.com/key-name . Path-style requests are not supported. For more information, see Regional and Zonal endpoints in the Amazon S3 User Guide.   Authentication and authorization  All UploadPartCopy requests must be authenticated and signed by using IAM credentials (access key ID and secret access key for the IAM identities). All headers with the x-amz- prefix, including x-amz-copy-source, must be signed. For more information, see REST Authentication.  Directory buckets - You must use IAM credentials to authenticate and authorize your access to the UploadPartCopy API operation, instead of using the temporary security credentials through the CreateSession API operation. Amazon Web Services CLI or SDKs handles authentication and authorization on your behalf.  Permissions  You must have READ access to the source object and WRITE access to the destination bucket.    General purpose bucket permissions - You must have the permissions in a policy based on the bucket types of your source bucket and destination bucket in an UploadPartCopy operation.   If the source object is in a general purpose bucket, you must have the  s3:GetObject  permission to read the source object that is being copied.    If the destination bucket is a general purpose bucket, you must have the  s3:PutObject  permission to write the object copy to the destination bucket.    To perform a multipart upload with encryption using an Key Management Service key, the requester must have permission to the kms:Decrypt and kms:GenerateDataKey actions on the key. The requester must also have permissions for the kms:GenerateDataKey action for the CreateMultipartUpload API. Then, the requester needs permissions for the kms:Decrypt action on the UploadPart and UploadPartCopy APIs. These permissions are required because Amazon S3 must decrypt and read data from the encrypted file parts before it completes the multipart upload. For more information about KMS permissions, see Protecting data using server-side encryption with KMS in the Amazon S3 User Guide. For information about the permissions required to use the multipart upload API, see Multipart upload and permissions and Multipart upload API and permissions in the Amazon S3 User Guide.      Directory bucket permissions - You must have permissions in a bucket policy or an IAM identity-based policy based on the source and destination bucket types in an UploadPartCopy operation.   If the source object that you want to copy is in a directory bucket, you must have the  s3express:CreateSession  permission in the Action element of a policy to read the object. By default, the session is in the ReadWrite mode. If you want to restrict the access, you can explicitly set the s3express:SessionMode condition key to ReadOnly on the copy source bucket.   If the copy destination is a directory bucket, you must have the  s3express:CreateSession  permission in the Action element of a policy to write the object to the destination. The s3express:SessionMode condition key cannot be set to ReadOnly on the copy destination.    If the object is encrypted with SSE-KMS, you must also have the kms:GenerateDataKey and kms:Decrypt permissions in IAM identity-based policies and KMS key policies for the KMS key. For example policies, see Example bucket policies for S3 Express One Zone and Amazon Web Services Identity and Access Management (IAM) identity-based policies for S3 Express One Zone in the Amazon S3 User Guide.    Encryption     General purpose buckets  - For information about using server-side encryption with customer-provided encryption keys with the UploadPartCopy operation, see CopyObject and UploadPart.     Directory buckets  - For directory buckets, there are only two supported options for server-side encryption: server-side encryption with Amazon S3 managed keys (SSE-S3) (AES256) and server-side encryption with KMS keys (SSE-KMS) (aws:kms). For more information, see Protecting data with server-side encryption in the Amazon S3 User Guide.  For directory buckets, when you perform a CreateMultipartUpload operation and an UploadPartCopy operation, the request headers you provide in the CreateMultipartUpload request must match the default encryption configuration of the destination bucket.   S3 Bucket Keys aren't supported, when you copy SSE-KMS encrypted objects from general purpose buckets to directory buckets, from directory buckets to general purpose buckets, or between directory buckets, through UploadPartCopy. In this case, Amazon S3 makes a call to KMS every time a copy request is made for a KMS-encrypted object.    Special errors    Error Code: NoSuchUpload    Description: The specified multipart upload does not exist. The upload ID might be invalid, or the multipart upload might have been aborted or completed.   HTTP Status Code: 404 Not Found     Error Code: InvalidRequest    Description: The specified copy source is not supported as a byte-range copy source.   HTTP Status Code: 400 Bad Request      HTTP Host header syntax   Directory buckets  - The HTTP Host header syntax is  Bucket_name.s3express-az_id.region.amazonaws.com.   The following operations are related to UploadPartCopy:    CreateMultipartUpload     UploadPart     CompleteMultipartUpload     AbortMultipartUpload     ListParts     ListMultipartUploads   
    */
   uploadPartCopy(callback?: (err: AWSError, data: S3.Types.UploadPartCopyOutput) => void): Request<S3.Types.UploadPartCopyOutput, AWSError>;
   /**
@@ -987,6 +987,10 @@ declare namespace S3 {
      * Date the bucket was created. This date can change when making changes to your bucket, such as editing its bucket policy.
      */
     CreationDate?: CreationDate;
+    /**
+     *  BucketRegion indicates the Amazon Web Services region where the bucket is located. If the request contains at least one valid parameter, it is included in the response.
+     */
+    BucketRegion?: BucketRegion;
   }
   export type BucketAccelerateStatus = "Enabled"|"Suspended"|string;
   export type BucketCannedACL = "private"|"public-read"|"public-read-write"|"authenticated-read"|string;
@@ -1014,6 +1018,7 @@ declare namespace S3 {
   }
   export type BucketLogsPermission = "FULL_CONTROL"|"READ"|"WRITE"|string;
   export type BucketName = string;
+  export type BucketRegion = string;
   export type BucketType = "Directory"|string;
   export type BucketVersioningStatus = "Enabled"|"Suspended"|string;
   export type Buckets = Bucket[];
@@ -1109,11 +1114,11 @@ declare namespace S3 {
   export type CacheControl = string;
   export interface Checksum {
     /**
-     * The base64-encoded, 32-bit CRC32 checksum of the object. This will only be present if it was uploaded with the object. When you use an API operation on an object that was uploaded using multipart uploads, this value may not be a direct checksum value of the full object. Instead, it's a calculation based on the checksum values of each individual part. For more information about how checksums are calculated with multipart uploads, see  Checking object integrity in the Amazon S3 User Guide.
+     * The base64-encoded, 32-bit CRC-32 checksum of the object. This will only be present if it was uploaded with the object. When you use an API operation on an object that was uploaded using multipart uploads, this value may not be a direct checksum value of the full object. Instead, it's a calculation based on the checksum values of each individual part. For more information about how checksums are calculated with multipart uploads, see  Checking object integrity in the Amazon S3 User Guide.
      */
     ChecksumCRC32?: ChecksumCRC32;
     /**
-     * The base64-encoded, 32-bit CRC32C checksum of the object. This will only be present if it was uploaded with the object. When you use an API operation on an object that was uploaded using multipart uploads, this value may not be a direct checksum value of the full object. Instead, it's a calculation based on the checksum values of each individual part. For more information about how checksums are calculated with multipart uploads, see  Checking object integrity in the Amazon S3 User Guide.
+     * The base64-encoded, 32-bit CRC-32C checksum of the object. This will only be present if it was uploaded with the object. When you use an API operation on an object that was uploaded using multipart uploads, this value may not be a direct checksum value of the full object. Instead, it's a calculation based on the checksum values of each individual part. For more information about how checksums are calculated with multipart uploads, see  Checking object integrity in the Amazon S3 User Guide.
      */
     ChecksumCRC32C?: ChecksumCRC32C;
     /**
@@ -1181,11 +1186,11 @@ declare namespace S3 {
      */
     ETag?: ETag;
     /**
-     * The base64-encoded, 32-bit CRC32 checksum of the object. This will only be present if it was uploaded with the object. When you use an API operation on an object that was uploaded using multipart uploads, this value may not be a direct checksum value of the full object. Instead, it's a calculation based on the checksum values of each individual part. For more information about how checksums are calculated with multipart uploads, see  Checking object integrity in the Amazon S3 User Guide.
+     * The base64-encoded, 32-bit CRC-32 checksum of the object. This will only be present if it was uploaded with the object. When you use an API operation on an object that was uploaded using multipart uploads, this value may not be a direct checksum value of the full object. Instead, it's a calculation based on the checksum values of each individual part. For more information about how checksums are calculated with multipart uploads, see  Checking object integrity in the Amazon S3 User Guide.
      */
     ChecksumCRC32?: ChecksumCRC32;
     /**
-     * The base64-encoded, 32-bit CRC32C checksum of the object. This will only be present if it was uploaded with the object. When you use an API operation on an object that was uploaded using multipart uploads, this value may not be a direct checksum value of the full object. Instead, it's a calculation based on the checksum values of each individual part. For more information about how checksums are calculated with multipart uploads, see  Checking object integrity in the Amazon S3 User Guide.
+     * The base64-encoded, 32-bit CRC-32C checksum of the object. This will only be present if it was uploaded with the object. When you use an API operation on an object that was uploaded using multipart uploads, this value may not be a direct checksum value of the full object. Instead, it's a calculation based on the checksum values of each individual part. For more information about how checksums are calculated with multipart uploads, see  Checking object integrity in the Amazon S3 User Guide.
      */
     ChecksumCRC32C?: ChecksumCRC32C;
     /**
@@ -1197,7 +1202,7 @@ declare namespace S3 {
      */
     ChecksumSHA256?: ChecksumSHA256;
     /**
-     * The server-side encryption algorithm used when storing this object in Amazon S3 (for example, AES256, aws:kms).  For directory buckets, only server-side encryption with Amazon S3 managed keys (SSE-S3) (AES256) is supported. 
+     * The server-side encryption algorithm used when storing this object in Amazon S3 (for example, AES256, aws:kms).
      */
     ServerSideEncryption?: ServerSideEncryption;
     /**
@@ -1205,11 +1210,11 @@ declare namespace S3 {
      */
     VersionId?: ObjectVersionId;
     /**
-     * If present, indicates the ID of the Key Management Service (KMS) symmetric encryption customer managed key that was used for the object.  This functionality is not supported for directory buckets. 
+     * If present, indicates the ID of the KMS key that was used for object encryption.
      */
     SSEKMSKeyId?: SSEKMSKeyId;
     /**
-     * Indicates whether the multipart upload uses an S3 Bucket Key for server-side encryption with Key Management Service (KMS) keys (SSE-KMS).  This functionality is not supported for directory buckets. 
+     * Indicates whether the multipart upload uses an S3 Bucket Key for server-side encryption with Key Management Service (KMS) keys (SSE-KMS).
      */
     BucketKeyEnabled?: BucketKeyEnabled;
     RequestCharged?: RequestCharged;
@@ -1232,11 +1237,11 @@ declare namespace S3 {
      */
     UploadId: MultipartUploadId;
     /**
-     * This header can be used as a data integrity check to verify that the data received is the same data that was originally sent. This header specifies the base64-encoded, 32-bit CRC32 checksum of the object. For more information, see Checking object integrity in the Amazon S3 User Guide.
+     * This header can be used as a data integrity check to verify that the data received is the same data that was originally sent. This header specifies the base64-encoded, 32-bit CRC-32 checksum of the object. For more information, see Checking object integrity in the Amazon S3 User Guide.
      */
     ChecksumCRC32?: ChecksumCRC32;
     /**
-     * This header can be used as a data integrity check to verify that the data received is the same data that was originally sent. This header specifies the base64-encoded, 32-bit CRC32C checksum of the object. For more information, see Checking object integrity in the Amazon S3 User Guide.
+     * This header can be used as a data integrity check to verify that the data received is the same data that was originally sent. This header specifies the base64-encoded, 32-bit CRC-32C checksum of the object. For more information, see Checking object integrity in the Amazon S3 User Guide.
      */
     ChecksumCRC32C?: ChecksumCRC32C;
     /**
@@ -1281,11 +1286,11 @@ declare namespace S3 {
      */
     ETag?: ETag;
     /**
-     * The base64-encoded, 32-bit CRC32 checksum of the object. This will only be present if it was uploaded with the object. When you use an API operation on an object that was uploaded using multipart uploads, this value may not be a direct checksum value of the full object. Instead, it's a calculation based on the checksum values of each individual part. For more information about how checksums are calculated with multipart uploads, see  Checking object integrity in the Amazon S3 User Guide.
+     * The base64-encoded, 32-bit CRC-32 checksum of the object. This will only be present if it was uploaded with the object. When you use an API operation on an object that was uploaded using multipart uploads, this value may not be a direct checksum value of the full object. Instead, it's a calculation based on the checksum values of each individual part. For more information about how checksums are calculated with multipart uploads, see  Checking object integrity in the Amazon S3 User Guide.
      */
     ChecksumCRC32?: ChecksumCRC32;
     /**
-     * The base64-encoded, 32-bit CRC32C checksum of the object. This will only be present if it was uploaded with the object. When you use an API operation on an object that was uploaded using multipart uploads, this value may not be a direct checksum value of the full object. Instead, it's a calculation based on the checksum values of each individual part. For more information about how checksums are calculated with multipart uploads, see  Checking object integrity in the Amazon S3 User Guide.
+     * The base64-encoded, 32-bit CRC-32C checksum of the object. This will only be present if it was uploaded with the object. When you use an API operation on an object that was uploaded using multipart uploads, this value may not be a direct checksum value of the full object. Instead, it's a calculation based on the checksum values of each individual part. For more information about how checksums are calculated with multipart uploads, see  Checking object integrity in the Amazon S3 User Guide.
      */
     ChecksumCRC32C?: ChecksumCRC32C;
     /**
@@ -1341,7 +1346,7 @@ declare namespace S3 {
      */
     VersionId?: ObjectVersionId;
     /**
-     * The server-side encryption algorithm used when you store this object in Amazon S3 (for example, AES256, aws:kms, aws:kms:dsse).  For directory buckets, only server-side encryption with Amazon S3 managed keys (SSE-S3) (AES256) is supported. 
+     * The server-side encryption algorithm used when you store this object in Amazon S3 (for example, AES256, aws:kms, aws:kms:dsse).
      */
     ServerSideEncryption?: ServerSideEncryption;
     /**
@@ -1353,15 +1358,15 @@ declare namespace S3 {
      */
     SSECustomerKeyMD5?: SSECustomerKeyMD5;
     /**
-     * If present, indicates the ID of the Key Management Service (KMS) symmetric encryption customer managed key that was used for the object.  This functionality is not supported for directory buckets. 
+     * If present, indicates the ID of the KMS key that was used for object encryption.
      */
     SSEKMSKeyId?: SSEKMSKeyId;
     /**
-     * If present, indicates the Amazon Web Services KMS Encryption Context to use for object encryption. The value of this header is a base64-encoded UTF-8 string holding JSON with the encryption context key-value pairs.  This functionality is not supported for directory buckets. 
+     * If present, indicates the Amazon Web Services KMS Encryption Context to use for object encryption. The value of this header is a base64-encoded UTF-8 string holding JSON with the encryption context key-value pairs.
      */
     SSEKMSEncryptionContext?: SSEKMSEncryptionContext;
     /**
-     * Indicates whether the copied object uses an S3 Bucket Key for server-side encryption with Key Management Service (KMS) keys (SSE-KMS).  This functionality is not supported for directory buckets. 
+     * Indicates whether the copied object uses an S3 Bucket Key for server-side encryption with Key Management Service (KMS) keys (SSE-KMS).
      */
     BucketKeyEnabled?: BucketKeyEnabled;
     RequestCharged?: RequestCharged;
@@ -1456,7 +1461,7 @@ declare namespace S3 {
      */
     TaggingDirective?: TaggingDirective;
     /**
-     * The server-side encryption algorithm used when storing this object in Amazon S3 (for example, AES256, aws:kms, aws:kms:dsse). Unrecognized or unsupported values won’t write a destination object and will receive a 400 Bad Request response.  Amazon S3 automatically encrypts all new objects that are copied to an S3 bucket. When copying an object, if you don't specify encryption information in your copy request, the encryption setting of the target object is set to the default encryption configuration of the destination bucket. By default, all buckets have a base level of encryption configuration that uses server-side encryption with Amazon S3 managed keys (SSE-S3). If the destination bucket has a default encryption configuration that uses server-side encryption with Key Management Service (KMS) keys (SSE-KMS), dual-layer server-side encryption with Amazon Web Services KMS keys (DSSE-KMS), or server-side encryption with customer-provided encryption keys (SSE-C), Amazon S3 uses the corresponding KMS key, or a customer-provided key to encrypt the target object copy. When you perform a CopyObject operation, if you want to use a different type of encryption setting for the target object, you can specify appropriate encryption-related headers to encrypt the target object with an Amazon S3 managed key, a KMS key, or a customer-provided key. If the encryption setting in your request is different from the default encryption configuration of the destination bucket, the encryption setting in your request takes precedence.  With server-side encryption, Amazon S3 encrypts your data as it writes your data to disks in its data centers and decrypts the data when you access it. For more information about server-side encryption, see Using Server-Side Encryption in the Amazon S3 User Guide.  For directory buckets, only server-side encryption with Amazon S3 managed keys (SSE-S3) (AES256) is supported. 
+     * The server-side encryption algorithm used when storing this object in Amazon S3. Unrecognized or unsupported values won’t write a destination object and will receive a 400 Bad Request response.  Amazon S3 automatically encrypts all new objects that are copied to an S3 bucket. When copying an object, if you don't specify encryption information in your copy request, the encryption setting of the target object is set to the default encryption configuration of the destination bucket. By default, all buckets have a base level of encryption configuration that uses server-side encryption with Amazon S3 managed keys (SSE-S3). If the destination bucket has a different default encryption configuration, Amazon S3 uses the corresponding encryption key to encrypt the target object copy. With server-side encryption, Amazon S3 encrypts your data as it writes your data to disks in its data centers and decrypts the data when you access it. For more information about server-side encryption, see Using Server-Side Encryption in the Amazon S3 User Guide.  General purpose buckets     For general purpose buckets, there are the following supported options for server-side encryption: server-side encryption with Key Management Service (KMS) keys (SSE-KMS), dual-layer server-side encryption with Amazon Web Services KMS keys (DSSE-KMS), and server-side encryption with customer-provided encryption keys (SSE-C). Amazon S3 uses the corresponding KMS key, or a customer-provided key to encrypt the target object copy.   When you perform a CopyObject operation, if you want to use a different type of encryption setting for the target object, you can specify appropriate encryption-related headers to encrypt the target object with an Amazon S3 managed key, a KMS key, or a customer-provided key. If the encryption setting in your request is different from the default encryption configuration of the destination bucket, the encryption setting in your request takes precedence.     Directory buckets     For directory buckets, there are only two supported options for server-side encryption: server-side encryption with Amazon S3 managed keys (SSE-S3) (AES256) and server-side encryption with KMS keys (SSE-KMS) (aws:kms). We recommend that the bucket's default encryption uses the desired encryption configuration and you don't override the bucket default encryption in your CreateSession requests or PUT object requests. Then, new objects are automatically encrypted with the desired encryption settings. For more information, see Protecting data with server-side encryption in the Amazon S3 User Guide. For more information about the encryption overriding behaviors in directory buckets, see Specifying server-side encryption with KMS for new object uploads.   To encrypt new object copies to a directory bucket with SSE-KMS, we recommend you specify SSE-KMS as the directory bucket's default encryption configuration with a KMS key (specifically, a customer managed key). The Amazon Web Services managed key (aws/s3) isn't supported. Your SSE-KMS configuration can only support 1 customer managed key per directory bucket for the lifetime of the bucket. After you specify a customer managed key for SSE-KMS, you can't override the customer managed key for the bucket's SSE-KMS configuration. Then, when you perform a CopyObject operation and want to specify server-side encryption settings for new object copies with SSE-KMS in the encryption-related request headers, you must ensure the encryption key is the same customer managed key that you specified for the directory bucket's default encryption configuration.   
      */
     ServerSideEncryption?: ServerSideEncryption;
     /**
@@ -1480,15 +1485,15 @@ declare namespace S3 {
      */
     SSECustomerKeyMD5?: SSECustomerKeyMD5;
     /**
-     * Specifies the KMS ID (Key ID, Key ARN, or Key Alias) to use for object encryption. All GET and PUT requests for an object protected by KMS will fail if they're not made via SSL or using SigV4. For information about configuring any of the officially supported Amazon Web Services SDKs and Amazon Web Services CLI, see Specifying the Signature Version in Request Authentication in the Amazon S3 User Guide.  This functionality is not supported when the destination bucket is a directory bucket. 
+     * Specifies the KMS key ID (Key ID, Key ARN, or Key Alias) to use for object encryption. All GET and PUT requests for an object protected by KMS will fail if they're not made via SSL or using SigV4. For information about configuring any of the officially supported Amazon Web Services SDKs and Amazon Web Services CLI, see Specifying the Signature Version in Request Authentication in the Amazon S3 User Guide.  Directory buckets - If you specify x-amz-server-side-encryption with aws:kms, the  x-amz-server-side-encryption-aws-kms-key-id header is implicitly assigned the ID of the KMS symmetric encryption customer managed key that's configured for your directory bucket's default encryption setting. If you want to specify the  x-amz-server-side-encryption-aws-kms-key-id header explicitly, you can only specify it with the ID (Key ID or Key ARN) of the KMS customer managed key that's configured for your directory bucket's default encryption setting. Otherwise, you get an HTTP 400 Bad Request error. Only use the key ID or key ARN. The key alias format of the KMS key isn't supported. Your SSE-KMS configuration can only support 1 customer managed key per directory bucket for the lifetime of the bucket. The Amazon Web Services managed key (aws/s3) isn't supported. 
      */
     SSEKMSKeyId?: SSEKMSKeyId;
     /**
-     * Specifies the Amazon Web Services KMS Encryption Context to use for object encryption. The value of this header is a base64-encoded UTF-8 string holding JSON with the encryption context key-value pairs. This value must be explicitly added to specify encryption context for CopyObject requests.  This functionality is not supported when the destination bucket is a directory bucket. 
+     * Specifies the Amazon Web Services KMS Encryption Context as an additional encryption context to use for the destination object encryption. The value of this header is a base64-encoded UTF-8 string holding JSON with the encryption context key-value pairs.  General purpose buckets - This value must be explicitly added to specify encryption context for CopyObject requests if you want an additional encryption context for your destination object. The additional encryption context of the source object won't be copied to the destination object. For more information, see Encryption context in the Amazon S3 User Guide.  Directory buckets - You can optionally provide an explicit encryption context value. The value must match the default encryption context - the bucket Amazon Resource Name (ARN). An additional encryption context value is not supported. 
      */
     SSEKMSEncryptionContext?: SSEKMSEncryptionContext;
     /**
-     * Specifies whether Amazon S3 should use an S3 Bucket Key for object encryption with server-side encryption using Key Management Service (KMS) keys (SSE-KMS). If a target object uses SSE-KMS, you can enable an S3 Bucket Key for the object. Setting this header to true causes Amazon S3 to use an S3 Bucket Key for object encryption with SSE-KMS. Specifying this header with a COPY action doesn’t affect bucket-level settings for S3 Bucket Key. For more information, see Amazon S3 Bucket Keys in the Amazon S3 User Guide.  This functionality is not supported when the destination bucket is a directory bucket. 
+     * Specifies whether Amazon S3 should use an S3 Bucket Key for object encryption with server-side encryption using Key Management Service (KMS) keys (SSE-KMS). If a target object uses SSE-KMS, you can enable an S3 Bucket Key for the object. Setting this header to true causes Amazon S3 to use an S3 Bucket Key for object encryption with SSE-KMS. Specifying this header with a COPY action doesn’t affect bucket-level settings for S3 Bucket Key. For more information, see Amazon S3 Bucket Keys in the Amazon S3 User Guide.   Directory buckets - S3 Bucket Keys aren't supported, when you copy SSE-KMS encrypted objects from general purpose buckets to directory buckets, from directory buckets to general purpose buckets, or between directory buckets, through CopyObject. In this case, Amazon S3 makes a call to KMS every time a copy request is made for a KMS-encrypted object. 
      */
     BucketKeyEnabled?: BucketKeyEnabled;
     /**
@@ -1539,11 +1544,11 @@ declare namespace S3 {
      */
     LastModified?: LastModified;
     /**
-     * The base64-encoded, 32-bit CRC32 checksum of the object. This will only be present if it was uploaded with the object. For more information, see  Checking object integrity in the Amazon S3 User Guide.
+     * The base64-encoded, 32-bit CRC-32 checksum of the object. This will only be present if it was uploaded with the object. For more information, see  Checking object integrity in the Amazon S3 User Guide.
      */
     ChecksumCRC32?: ChecksumCRC32;
     /**
-     * The base64-encoded, 32-bit CRC32C checksum of the object. This will only be present if it was uploaded with the object. For more information, see  Checking object integrity in the Amazon S3 User Guide.
+     * The base64-encoded, 32-bit CRC-32C checksum of the object. This will only be present if it was uploaded with the object. For more information, see  Checking object integrity in the Amazon S3 User Guide.
      */
     ChecksumCRC32C?: ChecksumCRC32C;
     /**
@@ -1565,11 +1570,11 @@ declare namespace S3 {
      */
     LastModified?: LastModified;
     /**
-     * The base64-encoded, 32-bit CRC32 checksum of the object. This will only be present if it was uploaded with the object. When you use an API operation on an object that was uploaded using multipart uploads, this value may not be a direct checksum value of the full object. Instead, it's a calculation based on the checksum values of each individual part. For more information about how checksums are calculated with multipart uploads, see  Checking object integrity in the Amazon S3 User Guide.
+     * The base64-encoded, 32-bit CRC-32 checksum of the object. This will only be present if it was uploaded with the object. When you use an API operation on an object that was uploaded using multipart uploads, this value may not be a direct checksum value of the full object. Instead, it's a calculation based on the checksum values of each individual part. For more information about how checksums are calculated with multipart uploads, see  Checking object integrity in the Amazon S3 User Guide.
      */
     ChecksumCRC32?: ChecksumCRC32;
     /**
-     * The base64-encoded, 32-bit CRC32C checksum of the object. This will only be present if it was uploaded with the object. When you use an API operation on an object that was uploaded using multipart uploads, this value may not be a direct checksum value of the full object. Instead, it's a calculation based on the checksum values of each individual part. For more information about how checksums are calculated with multipart uploads, see  Checking object integrity in the Amazon S3 User Guide.
+     * The base64-encoded, 32-bit CRC-32C checksum of the object. This will only be present if it was uploaded with the object. When you use an API operation on an object that was uploaded using multipart uploads, this value may not be a direct checksum value of the full object. Instead, it's a calculation based on the checksum values of each individual part. For more information about how checksums are calculated with multipart uploads, see  Checking object integrity in the Amazon S3 User Guide.
      */
     ChecksumCRC32C?: ChecksumCRC32C;
     /**
@@ -1672,7 +1677,7 @@ declare namespace S3 {
      */
     UploadId?: MultipartUploadId;
     /**
-     * The server-side encryption algorithm used when you store this object in Amazon S3 (for example, AES256, aws:kms).  For directory buckets, only server-side encryption with Amazon S3 managed keys (SSE-S3) (AES256) is supported. 
+     * The server-side encryption algorithm used when you store this object in Amazon S3 (for example, AES256, aws:kms).
      */
     ServerSideEncryption?: ServerSideEncryption;
     /**
@@ -1684,15 +1689,15 @@ declare namespace S3 {
      */
     SSECustomerKeyMD5?: SSECustomerKeyMD5;
     /**
-     * If present, indicates the ID of the Key Management Service (KMS) symmetric encryption customer managed key that was used for the object.  This functionality is not supported for directory buckets. 
+     * If present, indicates the ID of the KMS key that was used for object encryption.
      */
     SSEKMSKeyId?: SSEKMSKeyId;
     /**
-     * If present, indicates the Amazon Web Services KMS Encryption Context to use for object encryption. The value of this header is a base64-encoded UTF-8 string holding JSON with the encryption context key-value pairs.  This functionality is not supported for directory buckets. 
+     * If present, indicates the Amazon Web Services KMS Encryption Context to use for object encryption. The value of this header is a Base64-encoded string of a UTF-8 encoded JSON, which contains the encryption context as key-value pairs.
      */
     SSEKMSEncryptionContext?: SSEKMSEncryptionContext;
     /**
-     * Indicates whether the multipart upload uses an S3 Bucket Key for server-side encryption with Key Management Service (KMS) keys (SSE-KMS).  This functionality is not supported for directory buckets. 
+     * Indicates whether the multipart upload uses an S3 Bucket Key for server-side encryption with Key Management Service (KMS) keys (SSE-KMS).
      */
     BucketKeyEnabled?: BucketKeyEnabled;
     RequestCharged?: RequestCharged;
@@ -1759,7 +1764,7 @@ declare namespace S3 {
      */
     Metadata?: Metadata;
     /**
-     * The server-side encryption algorithm used when you store this object in Amazon S3 (for example, AES256, aws:kms).  For directory buckets, only server-side encryption with Amazon S3 managed keys (SSE-S3) (AES256) is supported. 
+     * The server-side encryption algorithm used when you store this object in Amazon S3 (for example, AES256, aws:kms).    Directory buckets  - For directory buckets, there are only two supported options for server-side encryption: server-side encryption with Amazon S3 managed keys (SSE-S3) (AES256) and server-side encryption with KMS keys (SSE-KMS) (aws:kms). We recommend that the bucket's default encryption uses the desired encryption configuration and you don't override the bucket default encryption in your CreateSession requests or PUT object requests. Then, new objects are automatically encrypted with the desired encryption settings. For more information, see Protecting data with server-side encryption in the Amazon S3 User Guide. For more information about the encryption overriding behaviors in directory buckets, see Specifying server-side encryption with KMS for new object uploads.  In the Zonal endpoint API calls (except CopyObject and UploadPartCopy) using the REST API, the encryption request headers must match the encryption settings that are specified in the CreateSession request. You can't override the values of the encryption settings (x-amz-server-side-encryption, x-amz-server-side-encryption-aws-kms-key-id, x-amz-server-side-encryption-context, and x-amz-server-side-encryption-bucket-key-enabled) that are specified in the CreateSession request. You don't need to explicitly specify these encryption settings values in Zonal endpoint API calls, and Amazon S3 will use the encryption settings values from the CreateSession request to protect new objects in the directory bucket.   When you use the CLI or the Amazon Web Services SDKs, for CreateSession, the session token refreshes automatically to avoid service interruptions when a session expires. The CLI or the Amazon Web Services SDKs use the bucket's default encryption configuration for the CreateSession request. It's not supported to override the encryption settings values in the CreateSession request. So in the Zonal endpoint API calls (except CopyObject and UploadPartCopy), the encryption request headers must match the default encryption configuration of the directory bucket.    
      */
     ServerSideEncryption?: ServerSideEncryption;
     /**
@@ -1783,15 +1788,15 @@ declare namespace S3 {
      */
     SSECustomerKeyMD5?: SSECustomerKeyMD5;
     /**
-     * Specifies the ID (Key ID, Key ARN, or Key Alias) of the symmetric encryption customer managed key to use for object encryption.  This functionality is not supported for directory buckets. 
+     * Specifies the KMS key ID (Key ID, Key ARN, or Key Alias) to use for object encryption. If the KMS key doesn't exist in the same account that's issuing the command, you must use the full Key ARN not the Key ID.  General purpose buckets - If you specify x-amz-server-side-encryption with aws:kms or aws:kms:dsse, this header specifies the ID (Key ID, Key ARN, or Key Alias) of the KMS key to use. If you specify x-amz-server-side-encryption:aws:kms or x-amz-server-side-encryption:aws:kms:dsse, but do not provide x-amz-server-side-encryption-aws-kms-key-id, Amazon S3 uses the Amazon Web Services managed key (aws/s3) to protect the data.  Directory buckets - If you specify x-amz-server-side-encryption with aws:kms, the  x-amz-server-side-encryption-aws-kms-key-id header is implicitly assigned the ID of the KMS symmetric encryption customer managed key that's configured for your directory bucket's default encryption setting. If you want to specify the  x-amz-server-side-encryption-aws-kms-key-id header explicitly, you can only specify it with the ID (Key ID or Key ARN) of the KMS customer managed key that's configured for your directory bucket's default encryption setting. Otherwise, you get an HTTP 400 Bad Request error. Only use the key ID or key ARN. The key alias format of the KMS key isn't supported. Your SSE-KMS configuration can only support 1 customer managed key per directory bucket for the lifetime of the bucket. The Amazon Web Services managed key (aws/s3) isn't supported. 
      */
     SSEKMSKeyId?: SSEKMSKeyId;
     /**
-     * Specifies the Amazon Web Services KMS Encryption Context to use for object encryption. The value of this header is a base64-encoded UTF-8 string holding JSON with the encryption context key-value pairs.  This functionality is not supported for directory buckets. 
+     * Specifies the Amazon Web Services KMS Encryption Context to use for object encryption. The value of this header is a Base64-encoded string of a UTF-8 encoded JSON, which contains the encryption context as key-value pairs.  Directory buckets - You can optionally provide an explicit encryption context value. The value must match the default encryption context - the bucket Amazon Resource Name (ARN). An additional encryption context value is not supported. 
      */
     SSEKMSEncryptionContext?: SSEKMSEncryptionContext;
     /**
-     * Specifies whether Amazon S3 should use an S3 Bucket Key for object encryption with server-side encryption using Key Management Service (KMS) keys (SSE-KMS). Setting this header to true causes Amazon S3 to use an S3 Bucket Key for object encryption with SSE-KMS. Specifying this header with an object action doesn’t affect bucket-level settings for S3 Bucket Key.  This functionality is not supported for directory buckets. 
+     * Specifies whether Amazon S3 should use an S3 Bucket Key for object encryption with server-side encryption using Key Management Service (KMS) keys (SSE-KMS).  General purpose buckets - Setting this header to true causes Amazon S3 to use an S3 Bucket Key for object encryption with SSE-KMS. Also, specifying this header with a PUT action doesn't affect bucket-level settings for S3 Bucket Key.  Directory buckets - S3 Bucket Keys are always enabled for GET and PUT operations in a directory bucket and can’t be disabled. S3 Bucket Keys aren't supported, when you copy SSE-KMS encrypted objects from general purpose buckets to directory buckets, from directory buckets to general purpose buckets, or between directory buckets, through CopyObject, UploadPartCopy, the Copy operation in Batch Operations, or the import jobs. In this case, Amazon S3 makes a call to KMS every time a copy request is made for a KMS-encrypted object.
      */
     BucketKeyEnabled?: BucketKeyEnabled;
     RequestPayer?: RequestPayer;
@@ -1821,6 +1826,22 @@ declare namespace S3 {
     ChecksumAlgorithm?: ChecksumAlgorithm;
   }
   export interface CreateSessionOutput {
+    /**
+     * The server-side encryption algorithm used when you store objects in the directory bucket.
+     */
+    ServerSideEncryption?: ServerSideEncryption;
+    /**
+     * If you specify x-amz-server-side-encryption with aws:kms, this header indicates the ID of the KMS symmetric encryption customer managed key that was used for object encryption.
+     */
+    SSEKMSKeyId?: SSEKMSKeyId;
+    /**
+     * If present, indicates the Amazon Web Services KMS Encryption Context to use for object encryption. The value of this header is a Base64-encoded string of a UTF-8 encoded JSON, which contains the encryption context as key-value pairs. This value is stored as object metadata and automatically gets passed on to Amazon Web Services KMS for future GetObject operations on this object.
+     */
+    SSEKMSEncryptionContext?: SSEKMSEncryptionContext;
+    /**
+     * Indicates whether to use an S3 Bucket Key for server-side encryption with KMS keys (SSE-KMS).
+     */
+    BucketKeyEnabled?: BucketKeyEnabled;
     /**
      * The established temporary security credentials for the created session.
      */
@@ -1828,13 +1849,29 @@ declare namespace S3 {
   }
   export interface CreateSessionRequest {
     /**
-     * Specifies the mode of the session that will be created, either ReadWrite or ReadOnly. By default, a ReadWrite session is created. A ReadWrite session is capable of executing all the Zonal endpoint APIs on a directory bucket. A ReadOnly session is constrained to execute the following Zonal endpoint APIs: GetObject, HeadObject, ListObjectsV2, GetObjectAttributes, ListParts, and ListMultipartUploads.
+     * Specifies the mode of the session that will be created, either ReadWrite or ReadOnly. By default, a ReadWrite session is created. A ReadWrite session is capable of executing all the Zonal endpoint API operations on a directory bucket. A ReadOnly session is constrained to execute the following Zonal endpoint API operations: GetObject, HeadObject, ListObjectsV2, GetObjectAttributes, ListParts, and ListMultipartUploads.
      */
     SessionMode?: SessionMode;
     /**
      * The name of the bucket that you create a session for.
      */
     Bucket: BucketName;
+    /**
+     * The server-side encryption algorithm to use when you store objects in the directory bucket. For directory buckets, there are only two supported options for server-side encryption: server-side encryption with Amazon S3 managed keys (SSE-S3) (AES256) and server-side encryption with KMS keys (SSE-KMS) (aws:kms). By default, Amazon S3 encrypts data with SSE-S3. For more information, see Protecting data with server-side encryption in the Amazon S3 User Guide.
+     */
+    ServerSideEncryption?: ServerSideEncryption;
+    /**
+     * If you specify x-amz-server-side-encryption with aws:kms, you must specify the  x-amz-server-side-encryption-aws-kms-key-id header with the ID (Key ID or Key ARN) of the KMS symmetric encryption customer managed key to use. Otherwise, you get an HTTP 400 Bad Request error. Only use the key ID or key ARN. The key alias format of the KMS key isn't supported. Also, if the KMS key doesn't exist in the same account that't issuing the command, you must use the full Key ARN not the Key ID.  Your SSE-KMS configuration can only support 1 customer managed key per directory bucket for the lifetime of the bucket. The Amazon Web Services managed key (aws/s3) isn't supported. 
+     */
+    SSEKMSKeyId?: SSEKMSKeyId;
+    /**
+     * Specifies the Amazon Web Services KMS Encryption Context as an additional encryption context to use for object encryption. The value of this header is a Base64-encoded string of a UTF-8 encoded JSON, which contains the encryption context as key-value pairs. This value is stored as object metadata and automatically gets passed on to Amazon Web Services KMS for future GetObject operations on this object.  General purpose buckets - This value must be explicitly added during CopyObject operations if you want an additional encryption context for your object. For more information, see Encryption context in the Amazon S3 User Guide.  Directory buckets - You can optionally provide an explicit encryption context value. The value must match the default encryption context - the bucket Amazon Resource Name (ARN). An additional encryption context value is not supported. 
+     */
+    SSEKMSEncryptionContext?: SSEKMSEncryptionContext;
+    /**
+     * Specifies whether Amazon S3 should use an S3 Bucket Key for object encryption with server-side encryption using KMS keys (SSE-KMS). S3 Bucket Keys are always enabled for GET and PUT operations in a directory bucket and can’t be disabled. S3 Bucket Keys aren't supported, when you copy SSE-KMS encrypted objects from general purpose buckets to directory buckets, from directory buckets to general purpose buckets, or between directory buckets, through CopyObject, UploadPartCopy, the Copy operation in Batch Operations, or the import jobs. In this case, Amazon S3 makes a call to KMS every time a copy request is made for a KMS-encrypted object.
+     */
+    BucketKeyEnabled?: BucketKeyEnabled;
   }
   export type CreationDate = Date;
   export type DataRedundancy = "SingleAvailabilityZone"|string;
@@ -1891,11 +1928,11 @@ declare namespace S3 {
   }
   export interface DeleteBucketEncryptionRequest {
     /**
-     * The name of the bucket containing the server-side encryption configuration to delete.
+     * The name of the bucket containing the server-side encryption configuration to delete.  Directory buckets  - When you use this operation with a directory bucket, you must use path-style requests in the format https://s3express-control.region_code.amazonaws.com/bucket-name . Virtual-hosted-style requests aren't supported. Directory bucket names must be unique in the chosen Availability Zone. Bucket names must also follow the format  bucket_base_name--az_id--x-s3 (for example,  DOC-EXAMPLE-BUCKET--usw2-az1--x-s3). For information about bucket naming restrictions, see Directory bucket naming rules in the Amazon S3 User Guide 
      */
     Bucket: BucketName;
     /**
-     * The account ID of the expected bucket owner. If the account ID that you provide does not match the actual owner of the bucket, the request fails with the HTTP status code 403 Forbidden (access denied).
+     * The account ID of the expected bucket owner. If the account ID that you provide does not match the actual owner of the bucket, the request fails with the HTTP status code 403 Forbidden (access denied).  For directory buckets, this header is not supported in this API operation. If you specify this header, the request fails with the HTTP status code 501 Not Implemented. 
      */
     ExpectedBucketOwner?: AccountId;
   }
@@ -2135,7 +2172,7 @@ declare namespace S3 {
      */
     ExpectedBucketOwner?: AccountId;
     /**
-     * Indicates the algorithm used to create the checksum for the object when you use the SDK. This header will not provide any additional functionality if you don't use the SDK. When you send this header, there must be a corresponding x-amz-checksum-algorithm  or x-amz-trailer header sent. Otherwise, Amazon S3 fails the request with the HTTP status code 400 Bad Request. For the x-amz-checksum-algorithm  header, replace  algorithm  with the supported algorithm from the following list:    CRC32   CRC32C   SHA1   SHA256   For more information, see Checking object integrity in the Amazon S3 User Guide. If the individual checksum value you provide through x-amz-checksum-algorithm  doesn't match the checksum algorithm you set through x-amz-sdk-checksum-algorithm, Amazon S3 ignores any provided ChecksumAlgorithm parameter and uses the checksum algorithm that matches the provided value in x-amz-checksum-algorithm . If you provide an individual checksum, Amazon S3 ignores any provided ChecksumAlgorithm parameter.
+     * Indicates the algorithm used to create the checksum for the object when you use the SDK. This header will not provide any additional functionality if you don't use the SDK. When you send this header, there must be a corresponding x-amz-checksum-algorithm  or x-amz-trailer header sent. Otherwise, Amazon S3 fails the request with the HTTP status code 400 Bad Request. For the x-amz-checksum-algorithm  header, replace  algorithm  with the supported algorithm from the following list:     CRC32     CRC32C     SHA1     SHA256    For more information, see Checking object integrity in the Amazon S3 User Guide. If the individual checksum value you provide through x-amz-checksum-algorithm  doesn't match the checksum algorithm you set through x-amz-sdk-checksum-algorithm, Amazon S3 ignores any provided ChecksumAlgorithm parameter and uses the checksum algorithm that matches the provided value in x-amz-checksum-algorithm . If you provide an individual checksum, Amazon S3 ignores any provided ChecksumAlgorithm parameter.
      */
     ChecksumAlgorithm?: ChecksumAlgorithm;
   }
@@ -2371,11 +2408,11 @@ declare namespace S3 {
   }
   export interface GetBucketEncryptionRequest {
     /**
-     * The name of the bucket from which the server-side encryption configuration is retrieved.
+     * The name of the bucket from which the server-side encryption configuration is retrieved.  Directory buckets  - When you use this operation with a directory bucket, you must use path-style requests in the format https://s3express-control.region_code.amazonaws.com/bucket-name . Virtual-hosted-style requests aren't supported. Directory bucket names must be unique in the chosen Availability Zone. Bucket names must also follow the format  bucket_base_name--az_id--x-s3 (for example,  DOC-EXAMPLE-BUCKET--usw2-az1--x-s3). For information about bucket naming restrictions, see Directory bucket naming rules in the Amazon S3 User Guide 
      */
     Bucket: BucketName;
     /**
-     * The account ID of the expected bucket owner. If the account ID that you provide does not match the actual owner of the bucket, the request fails with the HTTP status code 403 Forbidden (access denied).
+     * The account ID of the expected bucket owner. If the account ID that you provide does not match the actual owner of the bucket, the request fails with the HTTP status code 403 Forbidden (access denied).  For directory buckets, this header is not supported in this API operation. If you specify this header, the request fails with the HTTP status code 501 Not Implemented. 
      */
     ExpectedBucketOwner?: AccountId;
   }
@@ -2420,6 +2457,10 @@ declare namespace S3 {
      * Container for a lifecycle rule.
      */
     Rules?: LifecycleRules;
+    /**
+     * Indicates which default minimum object size behavior is applied to the lifecycle configuration.    all_storage_classes_128K - Objects smaller than 128 KB will not transition to any storage class by default.     varies_by_storage_class - Objects smaller than 128 KB will transition to Glacier Flexible Retrieval or Glacier Deep Archive storage classes. By default, all other storage classes will prevent transitions smaller than 128 KB.    To customize the minimum object size for any transition you can add a filter that specifies a custom ObjectSizeGreaterThan or ObjectSizeLessThan in the body of your transition rule. Custom filters always take precedence over the default transition behavior.
+     */
+    TransitionDefaultMinimumObjectSize?: TransitionDefaultMinimumObjectSize;
   }
   export interface GetBucketLifecycleConfigurationRequest {
     /**
@@ -2856,11 +2897,11 @@ declare namespace S3 {
      */
     ETag?: ETag;
     /**
-     * The base64-encoded, 32-bit CRC32 checksum of the object. This will only be present if it was uploaded with the object. For more information, see  Checking object integrity in the Amazon S3 User Guide.
+     * The base64-encoded, 32-bit CRC-32 checksum of the object. This will only be present if it was uploaded with the object. For more information, see  Checking object integrity in the Amazon S3 User Guide.
      */
     ChecksumCRC32?: ChecksumCRC32;
     /**
-     * The base64-encoded, 32-bit CRC32C checksum of the object. This will only be present if it was uploaded with the object. For more information, see  Checking object integrity in the Amazon S3 User Guide.
+     * The base64-encoded, 32-bit CRC-32C checksum of the object. This will only be present if it was uploaded with the object. For more information, see  Checking object integrity in the Amazon S3 User Guide.
      */
     ChecksumCRC32C?: ChecksumCRC32C;
     /**
@@ -2916,7 +2957,7 @@ declare namespace S3 {
      */
     WebsiteRedirectLocation?: WebsiteRedirectLocation;
     /**
-     * The server-side encryption algorithm used when you store this object in Amazon S3 (for example, AES256, aws:kms, aws:kms:dsse).  For directory buckets, only server-side encryption with Amazon S3 managed keys (SSE-S3) (AES256) is supported. 
+     * The server-side encryption algorithm used when you store this object in Amazon S3.
      */
     ServerSideEncryption?: ServerSideEncryption;
     /**
@@ -2932,11 +2973,11 @@ declare namespace S3 {
      */
     SSECustomerKeyMD5?: SSECustomerKeyMD5;
     /**
-     * If present, indicates the ID of the Key Management Service (KMS) symmetric encryption customer managed key that was used for the object.  This functionality is not supported for directory buckets. 
+     * If present, indicates the ID of the KMS key that was used for object encryption.
      */
     SSEKMSKeyId?: SSEKMSKeyId;
     /**
-     * Indicates whether the object uses an S3 Bucket Key for server-side encryption with Key Management Service (KMS) keys (SSE-KMS).  This functionality is not supported for directory buckets. 
+     * Indicates whether the object uses an S3 Bucket Key for server-side encryption with Key Management Service (KMS) keys (SSE-KMS).
      */
     BucketKeyEnabled?: BucketKeyEnabled;
     /**
@@ -3048,7 +3089,7 @@ declare namespace S3 {
      */
     ExpectedBucketOwner?: AccountId;
     /**
-     * To retrieve the checksum, this mode must be enabled. In addition, if you enable checksum mode and the object is uploaded with a checksum and encrypted with an Key Management Service (KMS) key, you must have permission to use the kms:Decrypt action to retrieve the checksum.
+     * To retrieve the checksum, this mode must be enabled.  General purpose buckets - In addition, if you enable checksum mode and the object is uploaded with a checksum and encrypted with an Key Management Service (KMS) key, you must have permission to use the kms:Decrypt action to retrieve the checksum.
      */
     ChecksumMode?: ChecksumMode;
   }
@@ -3247,11 +3288,11 @@ declare namespace S3 {
      */
     ContentLength?: ContentLength;
     /**
-     * The base64-encoded, 32-bit CRC32 checksum of the object. This will only be present if it was uploaded with the object. When you use an API operation on an object that was uploaded using multipart uploads, this value may not be a direct checksum value of the full object. Instead, it's a calculation based on the checksum values of each individual part. For more information about how checksums are calculated with multipart uploads, see  Checking object integrity in the Amazon S3 User Guide.
+     * The base64-encoded, 32-bit CRC-32 checksum of the object. This will only be present if it was uploaded with the object. When you use an API operation on an object that was uploaded using multipart uploads, this value may not be a direct checksum value of the full object. Instead, it's a calculation based on the checksum values of each individual part. For more information about how checksums are calculated with multipart uploads, see  Checking object integrity in the Amazon S3 User Guide.
      */
     ChecksumCRC32?: ChecksumCRC32;
     /**
-     * The base64-encoded, 32-bit CRC32C checksum of the object. This will only be present if it was uploaded with the object. When you use an API operation on an object that was uploaded using multipart uploads, this value may not be a direct checksum value of the full object. Instead, it's a calculation based on the checksum values of each individual part. For more information about how checksums are calculated with multipart uploads, see  Checking object integrity in the Amazon S3 User Guide.
+     * The base64-encoded, 32-bit CRC-32C checksum of the object. This will only be present if it was uploaded with the object. When you use an API operation on an object that was uploaded using multipart uploads, this value may not be a direct checksum value of the full object. Instead, it's a calculation based on the checksum values of each individual part. For more information about how checksums are calculated with multipart uploads, see  Checking object integrity in the Amazon S3 User Guide.
      */
     ChecksumCRC32C?: ChecksumCRC32C;
     /**
@@ -3307,7 +3348,7 @@ declare namespace S3 {
      */
     WebsiteRedirectLocation?: WebsiteRedirectLocation;
     /**
-     * The server-side encryption algorithm used when you store this object in Amazon S3 (for example, AES256, aws:kms, aws:kms:dsse).  For directory buckets, only server-side encryption with Amazon S3 managed keys (SSE-S3) (AES256) is supported. 
+     * The server-side encryption algorithm used when you store this object in Amazon S3 (for example, AES256, aws:kms, aws:kms:dsse).
      */
     ServerSideEncryption?: ServerSideEncryption;
     /**
@@ -3323,11 +3364,11 @@ declare namespace S3 {
      */
     SSECustomerKeyMD5?: SSECustomerKeyMD5;
     /**
-     * If present, indicates the ID of the Key Management Service (KMS) symmetric encryption customer managed key that was used for the object.  This functionality is not supported for directory buckets. 
+     * If present, indicates the ID of the KMS key that was used for object encryption.
      */
     SSEKMSKeyId?: SSEKMSKeyId;
     /**
-     * Indicates whether the object uses an S3 Bucket Key for server-side encryption with Key Management Service (KMS) keys (SSE-KMS).  This functionality is not supported for directory buckets. 
+     * Indicates whether the object uses an S3 Bucket Key for server-side encryption with Key Management Service (KMS) keys (SSE-KMS).
      */
     BucketKeyEnabled?: BucketKeyEnabled;
     /**
@@ -3435,7 +3476,7 @@ declare namespace S3 {
      */
     ExpectedBucketOwner?: AccountId;
     /**
-     * To retrieve the checksum, this parameter must be enabled. In addition, if you enable checksum mode and the object is uploaded with a checksum and encrypted with an Key Management Service (KMS) key, you must have permission to use the kms:Decrypt action to retrieve the checksum.
+     * To retrieve the checksum, this parameter must be enabled.  General purpose buckets - If you enable checksum mode and the object is uploaded with a checksum and encrypted with an Key Management Service (KMS) key, you must have permission to use the kms:Decrypt action to retrieve the checksum.  Directory buckets - If you enable ChecksumMode and the object is encrypted with Amazon Web Services Key Management Service (Amazon Web Services KMS), you must also have the kms:GenerateDataKey and kms:Decrypt permissions in IAM identity-based policies and KMS key policies for the KMS key to retrieve the checksum of the object.
      */
     ChecksumMode?: ChecksumMode;
   }
@@ -3877,6 +3918,10 @@ declare namespace S3 {
      *  ContinuationToken is included in the response when there are more buckets that can be listed with pagination. The next ListBuckets request to Amazon S3 can be continued with this ContinuationToken. ContinuationToken is obfuscated and is not a real bucket.
      */
     ContinuationToken?: NextToken;
+    /**
+     * If Prefix was sent with the request, it is included in the response. All bucket names in the response begin with the specified bucket name prefix.
+     */
+    Prefix?: Prefix;
   }
   export interface ListBucketsRequest {
     /**
@@ -3887,6 +3932,14 @@ declare namespace S3 {
      *  ContinuationToken indicates to Amazon S3 that the list is being continued on this bucket with a token. ContinuationToken is obfuscated and is not a real key. You can use this ContinuationToken for pagination of the list results.  Length Constraints: Minimum length of 0. Maximum length of 1024. Required: No.
      */
     ContinuationToken?: Token;
+    /**
+     * Limits the response to bucket names that begin with the specified bucket name prefix.
+     */
+    Prefix?: Prefix;
+    /**
+     * Limits the response to buckets that are located in the specified Amazon Web Services Region. The Amazon Web Services Region must be expressed according to the Amazon Web Services Region code, such as us-west-2 for the US West (Oregon) Region. For a list of the valid values for all of the Amazon Web Services Regions, see Regions and Endpoints.  Requests made to a Regional endpoint that is different from the bucket-region parameter are not supported. For example, if you want to limit the response to your buckets in Region us-west-2, the request must be made to an endpoint in Region us-west-2. 
+     */
+    BucketRegion?: BucketRegion;
   }
   export interface ListDirectoryBucketsOutput {
     /**
@@ -4668,11 +4721,11 @@ declare namespace S3 {
      */
     Size?: Size;
     /**
-     * This header can be used as a data integrity check to verify that the data received is the same data that was originally sent. This header specifies the base64-encoded, 32-bit CRC32 checksum of the object. For more information, see Checking object integrity in the Amazon S3 User Guide.
+     * This header can be used as a data integrity check to verify that the data received is the same data that was originally sent. This header specifies the base64-encoded, 32-bit CRC-32 checksum of the object. For more information, see Checking object integrity in the Amazon S3 User Guide.
      */
     ChecksumCRC32?: ChecksumCRC32;
     /**
-     * The base64-encoded, 32-bit CRC32C checksum of the object. This will only be present if it was uploaded with the object. When you use an API operation on an object that was uploaded using multipart uploads, this value may not be a direct checksum value of the full object. Instead, it's a calculation based on the checksum values of each individual part. For more information about how checksums are calculated with multipart uploads, see  Checking object integrity in the Amazon S3 User Guide.
+     * The base64-encoded, 32-bit CRC-32C checksum of the object. This will only be present if it was uploaded with the object. When you use an API operation on an object that was uploaded using multipart uploads, this value may not be a direct checksum value of the full object. Instead, it's a calculation based on the checksum values of each individual part. For more information about how checksums are calculated with multipart uploads, see  Checking object integrity in the Amazon S3 User Guide.
      */
     ChecksumCRC32C?: ChecksumCRC32C;
     /**
@@ -4792,11 +4845,11 @@ declare namespace S3 {
      */
     Size?: Size;
     /**
-     * This header can be used as a data integrity check to verify that the data received is the same data that was originally sent. This header specifies the base64-encoded, 32-bit CRC32 checksum of the object. For more information, see Checking object integrity in the Amazon S3 User Guide.
+     * This header can be used as a data integrity check to verify that the data received is the same data that was originally sent. This header specifies the base64-encoded, 32-bit CRC-32 checksum of the object. For more information, see Checking object integrity in the Amazon S3 User Guide.
      */
     ChecksumCRC32?: ChecksumCRC32;
     /**
-     * The base64-encoded, 32-bit CRC32C checksum of the object. This will only be present if it was uploaded with the object. When you use an API operation on an object that was uploaded using multipart uploads, this value may not be a direct checksum value of the full object. Instead, it's a calculation based on the checksum values of each individual part. For more information about how checksums are calculated with multipart uploads, see  Checking object integrity in the Amazon S3 User Guide.
+     * The base64-encoded, 32-bit CRC-32C checksum of the object. This will only be present if it was uploaded with the object. When you use an API operation on an object that was uploaded using multipart uploads, this value may not be a direct checksum value of the full object. Instead, it's a calculation based on the checksum values of each individual part. For more information about how checksums are calculated with multipart uploads, see  Checking object integrity in the Amazon S3 User Guide.
      */
     ChecksumCRC32C?: ChecksumCRC32C;
     /**
@@ -4866,7 +4919,7 @@ declare namespace S3 {
      */
     BlockPublicPolicy?: Setting;
     /**
-     * Specifies whether Amazon S3 should restrict public bucket policies for this bucket. Setting this element to TRUE restricts access to this bucket to only Amazon Web Servicesservice principals and authorized users within this account if the bucket has a public policy. Enabling this setting doesn't affect previously stored bucket policies, except that public and cross-account access within any public bucket policy, including non-public delegation to specific accounts, is blocked.
+     * Specifies whether Amazon S3 should restrict public bucket policies for this bucket. Setting this element to TRUE restricts access to this bucket to only Amazon Web Services service principals and authorized users within this account if the bucket has a public policy. Enabling this setting doesn't affect previously stored bucket policies, except that public and cross-account access within any public bucket policy, including non-public delegation to specific accounts, is blocked.
      */
     RestrictPublicBuckets?: Setting;
   }
@@ -4976,20 +5029,20 @@ declare namespace S3 {
   }
   export interface PutBucketEncryptionRequest {
     /**
-     * Specifies default encryption for a bucket using server-side encryption with different key options. By default, all buckets have a default encryption configuration that uses server-side encryption with Amazon S3 managed keys (SSE-S3). You can optionally configure default encryption for a bucket by using server-side encryption with an Amazon Web Services KMS key (SSE-KMS) or a customer-provided key (SSE-C). For information about the bucket default encryption feature, see Amazon S3 Bucket Default Encryption in the Amazon S3 User Guide.
+     * Specifies default encryption for a bucket using server-side encryption with different key options.  Directory buckets  - When you use this operation with a directory bucket, you must use path-style requests in the format https://s3express-control.region_code.amazonaws.com/bucket-name . Virtual-hosted-style requests aren't supported. Directory bucket names must be unique in the chosen Availability Zone. Bucket names must also follow the format  bucket_base_name--az_id--x-s3 (for example,  DOC-EXAMPLE-BUCKET--usw2-az1--x-s3). For information about bucket naming restrictions, see Directory bucket naming rules in the Amazon S3 User Guide 
      */
     Bucket: BucketName;
     /**
-     * The base64-encoded 128-bit MD5 digest of the server-side encryption configuration. For requests made using the Amazon Web Services Command Line Interface (CLI) or Amazon Web Services SDKs, this field is calculated automatically.
+     * The base64-encoded 128-bit MD5 digest of the server-side encryption configuration. For requests made using the Amazon Web Services Command Line Interface (CLI) or Amazon Web Services SDKs, this field is calculated automatically.  This functionality is not supported for directory buckets. 
      */
     ContentMD5?: ContentMD5;
     /**
-     * Indicates the algorithm used to create the checksum for the object when you use the SDK. This header will not provide any additional functionality if you don't use the SDK. When you send this header, there must be a corresponding x-amz-checksum or x-amz-trailer header sent. Otherwise, Amazon S3 fails the request with the HTTP status code 400 Bad Request. For more information, see Checking object integrity in the Amazon S3 User Guide. If you provide an individual checksum, Amazon S3 ignores any provided ChecksumAlgorithm parameter.
+     * Indicates the algorithm used to create the checksum for the object when you use the SDK. This header will not provide any additional functionality if you don't use the SDK. When you send this header, there must be a corresponding x-amz-checksum or x-amz-trailer header sent. Otherwise, Amazon S3 fails the request with the HTTP status code 400 Bad Request. For more information, see Checking object integrity in the Amazon S3 User Guide. If you provide an individual checksum, Amazon S3 ignores any provided ChecksumAlgorithm parameter.  For directory buckets, when you use Amazon Web Services SDKs, CRC32 is the default checksum algorithm that's used for performance. 
      */
     ChecksumAlgorithm?: ChecksumAlgorithm;
     ServerSideEncryptionConfiguration: ServerSideEncryptionConfiguration;
     /**
-     * The account ID of the expected bucket owner. If the account ID that you provide does not match the actual owner of the bucket, the request fails with the HTTP status code 403 Forbidden (access denied).
+     * The account ID of the expected bucket owner. If the account ID that you provide does not match the actual owner of the bucket, the request fails with the HTTP status code 403 Forbidden (access denied).  For directory buckets, this header is not supported in this API operation. If you specify this header, the request fails with the HTTP status code 501 Not Implemented. 
      */
     ExpectedBucketOwner?: AccountId;
   }
@@ -5025,6 +5078,12 @@ declare namespace S3 {
      */
     ExpectedBucketOwner?: AccountId;
   }
+  export interface PutBucketLifecycleConfigurationOutput {
+    /**
+     * Indicates which default minimum object size behavior is applied to the lifecycle configuration.    all_storage_classes_128K - Objects smaller than 128 KB will not transition to any storage class by default.     varies_by_storage_class - Objects smaller than 128 KB will transition to Glacier Flexible Retrieval or Glacier Deep Archive storage classes. By default, all other storage classes will prevent transitions smaller than 128 KB.    To customize the minimum object size for any transition you can add a filter that specifies a custom ObjectSizeGreaterThan or ObjectSizeLessThan in the body of your transition rule. Custom filters always take precedence over the default transition behavior.
+     */
+    TransitionDefaultMinimumObjectSize?: TransitionDefaultMinimumObjectSize;
+  }
   export interface PutBucketLifecycleConfigurationRequest {
     /**
      * The name of the bucket for which to set the configuration.
@@ -5042,6 +5101,10 @@ declare namespace S3 {
      * The account ID of the expected bucket owner. If the account ID that you provide does not match the actual owner of the bucket, the request fails with the HTTP status code 403 Forbidden (access denied).
      */
     ExpectedBucketOwner?: AccountId;
+    /**
+     * Indicates which default minimum object size behavior is applied to the lifecycle configuration.    all_storage_classes_128K - Objects smaller than 128 KB will not transition to any storage class by default.     varies_by_storage_class - Objects smaller than 128 KB will transition to Glacier Flexible Retrieval or Glacier Deep Archive storage classes. By default, all other storage classes will prevent transitions smaller than 128 KB.    To customize the minimum object size for any transition you can add a filter that specifies a custom ObjectSizeGreaterThan or ObjectSizeLessThan in the body of your transition rule. Custom filters always take precedence over the default transition behavior.
+     */
+    TransitionDefaultMinimumObjectSize?: TransitionDefaultMinimumObjectSize;
   }
   export interface PutBucketLifecycleRequest {
     /**
@@ -5170,7 +5233,7 @@ declare namespace S3 {
      */
     ContentMD5?: ContentMD5;
     /**
-     * Indicates the algorithm used to create the checksum for the object when you use the SDK. This header will not provide any additional functionality if you don't use the SDK. When you send this header, there must be a corresponding x-amz-checksum-algorithm  or x-amz-trailer header sent. Otherwise, Amazon S3 fails the request with the HTTP status code 400 Bad Request. For the x-amz-checksum-algorithm  header, replace  algorithm  with the supported algorithm from the following list:    CRC32   CRC32C   SHA1   SHA256   For more information, see Checking object integrity in the Amazon S3 User Guide. If the individual checksum value you provide through x-amz-checksum-algorithm  doesn't match the checksum algorithm you set through x-amz-sdk-checksum-algorithm, Amazon S3 ignores any provided ChecksumAlgorithm parameter and uses the checksum algorithm that matches the provided value in x-amz-checksum-algorithm .  For directory buckets, when you use Amazon Web Services SDKs, CRC32 is the default checksum algorithm that's used for performance. 
+     * Indicates the algorithm used to create the checksum for the object when you use the SDK. This header will not provide any additional functionality if you don't use the SDK. When you send this header, there must be a corresponding x-amz-checksum-algorithm  or x-amz-trailer header sent. Otherwise, Amazon S3 fails the request with the HTTP status code 400 Bad Request. For the x-amz-checksum-algorithm  header, replace  algorithm  with the supported algorithm from the following list:     CRC32     CRC32C     SHA1     SHA256    For more information, see Checking object integrity in the Amazon S3 User Guide. If the individual checksum value you provide through x-amz-checksum-algorithm  doesn't match the checksum algorithm you set through x-amz-sdk-checksum-algorithm, Amazon S3 ignores any provided ChecksumAlgorithm parameter and uses the checksum algorithm that matches the provided value in x-amz-checksum-algorithm .  For directory buckets, when you use Amazon Web Services SDKs, CRC32 is the default checksum algorithm that's used for performance. 
      */
     ChecksumAlgorithm?: ChecksumAlgorithm;
     /**
@@ -5433,11 +5496,11 @@ declare namespace S3 {
      */
     ETag?: ETag;
     /**
-     * The base64-encoded, 32-bit CRC32 checksum of the object. This will only be present if it was uploaded with the object. When you use an API operation on an object that was uploaded using multipart uploads, this value may not be a direct checksum value of the full object. Instead, it's a calculation based on the checksum values of each individual part. For more information about how checksums are calculated with multipart uploads, see  Checking object integrity in the Amazon S3 User Guide.
+     * The base64-encoded, 32-bit CRC-32 checksum of the object. This will only be present if it was uploaded with the object. When you use an API operation on an object that was uploaded using multipart uploads, this value may not be a direct checksum value of the full object. Instead, it's a calculation based on the checksum values of each individual part. For more information about how checksums are calculated with multipart uploads, see  Checking object integrity in the Amazon S3 User Guide.
      */
     ChecksumCRC32?: ChecksumCRC32;
     /**
-     * The base64-encoded, 32-bit CRC32C checksum of the object. This will only be present if it was uploaded with the object. When you use an API operation on an object that was uploaded using multipart uploads, this value may not be a direct checksum value of the full object. Instead, it's a calculation based on the checksum values of each individual part. For more information about how checksums are calculated with multipart uploads, see  Checking object integrity in the Amazon S3 User Guide.
+     * The base64-encoded, 32-bit CRC-32C checksum of the object. This will only be present if it was uploaded with the object. When you use an API operation on an object that was uploaded using multipart uploads, this value may not be a direct checksum value of the full object. Instead, it's a calculation based on the checksum values of each individual part. For more information about how checksums are calculated with multipart uploads, see  Checking object integrity in the Amazon S3 User Guide.
      */
     ChecksumCRC32C?: ChecksumCRC32C;
     /**
@@ -5449,7 +5512,7 @@ declare namespace S3 {
      */
     ChecksumSHA256?: ChecksumSHA256;
     /**
-     * The server-side encryption algorithm used when you store this object in Amazon S3 (for example, AES256, aws:kms, aws:kms:dsse).  For directory buckets, only server-side encryption with Amazon S3 managed keys (SSE-S3) (AES256) is supported. 
+     * The server-side encryption algorithm used when you store this object in Amazon S3.
      */
     ServerSideEncryption?: ServerSideEncryption;
     /**
@@ -5465,15 +5528,15 @@ declare namespace S3 {
      */
     SSECustomerKeyMD5?: SSECustomerKeyMD5;
     /**
-     * If x-amz-server-side-encryption has a valid value of aws:kms or aws:kms:dsse, this header indicates the ID of the Key Management Service (KMS) symmetric encryption customer managed key that was used for the object.   This functionality is not supported for directory buckets. 
+     * If present, indicates the ID of the KMS key that was used for object encryption.
      */
     SSEKMSKeyId?: SSEKMSKeyId;
     /**
-     * If present, indicates the Amazon Web Services KMS Encryption Context to use for object encryption. The value of this header is a base64-encoded UTF-8 string holding JSON with the encryption context key-value pairs. This value is stored as object metadata and automatically gets passed on to Amazon Web Services KMS for future GetObject or CopyObject operations on this object.  This functionality is not supported for directory buckets. 
+     * If present, indicates the Amazon Web Services KMS Encryption Context to use for object encryption. The value of this header is a Base64-encoded string of a UTF-8 encoded JSON, which contains the encryption context as key-value pairs. This value is stored as object metadata and automatically gets passed on to Amazon Web Services KMS for future GetObject operations on this object.
      */
     SSEKMSEncryptionContext?: SSEKMSEncryptionContext;
     /**
-     * Indicates whether the uploaded object uses an S3 Bucket Key for server-side encryption with Key Management Service (KMS) keys (SSE-KMS).  This functionality is not supported for directory buckets. 
+     * Indicates whether the uploaded object uses an S3 Bucket Key for server-side encryption with Key Management Service (KMS) keys (SSE-KMS).
      */
     BucketKeyEnabled?: BucketKeyEnabled;
     RequestCharged?: RequestCharged;
@@ -5512,7 +5575,7 @@ declare namespace S3 {
      */
     ContentLength?: ContentLength;
     /**
-     * The base64-encoded 128-bit MD5 digest of the message (without the headers) according to RFC 1864. This header can be used as a message integrity check to verify that the data is the same data that was originally sent. Although it is optional, we recommend using the Content-MD5 mechanism as an end-to-end integrity check. For more information about REST request authentication, see REST Authentication.  The Content-MD5 header is required for any request to upload an object with a retention period configured using Amazon S3 Object Lock. For more information about Amazon S3 Object Lock, see Amazon S3 Object Lock Overview in the Amazon S3 User Guide.    This functionality is not supported for directory buckets. 
+     * The base64-encoded 128-bit MD5 digest of the message (without the headers) according to RFC 1864. This header can be used as a message integrity check to verify that the data is the same data that was originally sent. Although it is optional, we recommend using the Content-MD5 mechanism as an end-to-end integrity check. For more information about REST request authentication, see REST Authentication.  The Content-MD5 or x-amz-sdk-checksum-algorithm header is required for any request to upload an object with a retention period configured using Amazon S3 Object Lock. For more information, see Uploading objects to an Object Lock enabled bucket  in the Amazon S3 User Guide.   This functionality is not supported for directory buckets. 
      */
     ContentMD5?: ContentMD5;
     /**
@@ -5520,15 +5583,15 @@ declare namespace S3 {
      */
     ContentType?: ContentType;
     /**
-     * Indicates the algorithm used to create the checksum for the object when you use the SDK. This header will not provide any additional functionality if you don't use the SDK. When you send this header, there must be a corresponding x-amz-checksum-algorithm  or x-amz-trailer header sent. Otherwise, Amazon S3 fails the request with the HTTP status code 400 Bad Request. For the x-amz-checksum-algorithm  header, replace  algorithm  with the supported algorithm from the following list:    CRC32   CRC32C   SHA1   SHA256   For more information, see Checking object integrity in the Amazon S3 User Guide. If the individual checksum value you provide through x-amz-checksum-algorithm  doesn't match the checksum algorithm you set through x-amz-sdk-checksum-algorithm, Amazon S3 ignores any provided ChecksumAlgorithm parameter and uses the checksum algorithm that matches the provided value in x-amz-checksum-algorithm .  For directory buckets, when you use Amazon Web Services SDKs, CRC32 is the default checksum algorithm that's used for performance. 
+     * Indicates the algorithm used to create the checksum for the object when you use the SDK. This header will not provide any additional functionality if you don't use the SDK. When you send this header, there must be a corresponding x-amz-checksum-algorithm  or x-amz-trailer header sent. Otherwise, Amazon S3 fails the request with the HTTP status code 400 Bad Request. For the x-amz-checksum-algorithm  header, replace  algorithm  with the supported algorithm from the following list:     CRC32     CRC32C     SHA1     SHA256    For more information, see Checking object integrity in the Amazon S3 User Guide. If the individual checksum value you provide through x-amz-checksum-algorithm  doesn't match the checksum algorithm you set through x-amz-sdk-checksum-algorithm, Amazon S3 ignores any provided ChecksumAlgorithm parameter and uses the checksum algorithm that matches the provided value in x-amz-checksum-algorithm .  The Content-MD5 or x-amz-sdk-checksum-algorithm header is required for any request to upload an object with a retention period configured using Amazon S3 Object Lock. For more information, see Uploading objects to an Object Lock enabled bucket  in the Amazon S3 User Guide.  For directory buckets, when you use Amazon Web Services SDKs, CRC32 is the default checksum algorithm that's used for performance.
      */
     ChecksumAlgorithm?: ChecksumAlgorithm;
     /**
-     * This header can be used as a data integrity check to verify that the data received is the same data that was originally sent. This header specifies the base64-encoded, 32-bit CRC32 checksum of the object. For more information, see Checking object integrity in the Amazon S3 User Guide.
+     * This header can be used as a data integrity check to verify that the data received is the same data that was originally sent. This header specifies the base64-encoded, 32-bit CRC-32 checksum of the object. For more information, see Checking object integrity in the Amazon S3 User Guide.
      */
     ChecksumCRC32?: ChecksumCRC32;
     /**
-     * This header can be used as a data integrity check to verify that the data received is the same data that was originally sent. This header specifies the base64-encoded, 32-bit CRC32C checksum of the object. For more information, see Checking object integrity in the Amazon S3 User Guide.
+     * This header can be used as a data integrity check to verify that the data received is the same data that was originally sent. This header specifies the base64-encoded, 32-bit CRC-32C checksum of the object. For more information, see Checking object integrity in the Amazon S3 User Guide.
      */
     ChecksumCRC32C?: ChecksumCRC32C;
     /**
@@ -5572,7 +5635,7 @@ declare namespace S3 {
      */
     Metadata?: Metadata;
     /**
-     * The server-side encryption algorithm that was used when you store this object in Amazon S3 (for example, AES256, aws:kms, aws:kms:dsse).  General purpose buckets  - You have four mutually exclusive options to protect data using server-side encryption in Amazon S3, depending on how you choose to manage the encryption keys. Specifically, the encryption key options are Amazon S3 managed keys (SSE-S3), Amazon Web Services KMS keys (SSE-KMS or DSSE-KMS), and customer-provided keys (SSE-C). Amazon S3 encrypts data with server-side encryption by using Amazon S3 managed keys (SSE-S3) by default. You can optionally tell Amazon S3 to encrypt data at rest by using server-side encryption with other key options. For more information, see Using Server-Side Encryption in the Amazon S3 User Guide.  Directory buckets  - For directory buckets, only the server-side encryption with Amazon S3 managed keys (SSE-S3) (AES256) value is supported.
+     * The server-side encryption algorithm that was used when you store this object in Amazon S3 (for example, AES256, aws:kms, aws:kms:dsse).    General purpose buckets  - You have four mutually exclusive options to protect data using server-side encryption in Amazon S3, depending on how you choose to manage the encryption keys. Specifically, the encryption key options are Amazon S3 managed keys (SSE-S3), Amazon Web Services KMS keys (SSE-KMS or DSSE-KMS), and customer-provided keys (SSE-C). Amazon S3 encrypts data with server-side encryption by using Amazon S3 managed keys (SSE-S3) by default. You can optionally tell Amazon S3 to encrypt data at rest by using server-side encryption with other key options. For more information, see Using Server-Side Encryption in the Amazon S3 User Guide.    Directory buckets  - For directory buckets, there are only two supported options for server-side encryption: server-side encryption with Amazon S3 managed keys (SSE-S3) (AES256) and server-side encryption with KMS keys (SSE-KMS) (aws:kms). We recommend that the bucket's default encryption uses the desired encryption configuration and you don't override the bucket default encryption in your CreateSession requests or PUT object requests. Then, new objects are automatically encrypted with the desired encryption settings. For more information, see Protecting data with server-side encryption in the Amazon S3 User Guide. For more information about the encryption overriding behaviors in directory buckets, see Specifying server-side encryption with KMS for new object uploads.  In the Zonal endpoint API calls (except CopyObject and UploadPartCopy) using the REST API, the encryption request headers must match the encryption settings that are specified in the CreateSession request. You can't override the values of the encryption settings (x-amz-server-side-encryption, x-amz-server-side-encryption-aws-kms-key-id, x-amz-server-side-encryption-context, and x-amz-server-side-encryption-bucket-key-enabled) that are specified in the CreateSession request. You don't need to explicitly specify these encryption settings values in Zonal endpoint API calls, and Amazon S3 will use the encryption settings values from the CreateSession request to protect new objects in the directory bucket.   When you use the CLI or the Amazon Web Services SDKs, for CreateSession, the session token refreshes automatically to avoid service interruptions when a session expires. The CLI or the Amazon Web Services SDKs use the bucket's default encryption configuration for the CreateSession request. It's not supported to override the encryption settings values in the CreateSession request. So in the Zonal endpoint API calls (except CopyObject and UploadPartCopy), the encryption request headers must match the default encryption configuration of the directory bucket.    
      */
     ServerSideEncryption?: ServerSideEncryption;
     /**
@@ -5596,15 +5659,15 @@ declare namespace S3 {
      */
     SSECustomerKeyMD5?: SSECustomerKeyMD5;
     /**
-     * If x-amz-server-side-encryption has a valid value of aws:kms or aws:kms:dsse, this header specifies the ID (Key ID, Key ARN, or Key Alias) of the Key Management Service (KMS) symmetric encryption customer managed key that was used for the object. If you specify x-amz-server-side-encryption:aws:kms or x-amz-server-side-encryption:aws:kms:dsse, but do not provide x-amz-server-side-encryption-aws-kms-key-id, Amazon S3 uses the Amazon Web Services managed key (aws/s3) to protect the data. If the KMS key does not exist in the same account that's issuing the command, you must use the full ARN and not just the ID.   This functionality is not supported for directory buckets. 
+     * Specifies the KMS key ID (Key ID, Key ARN, or Key Alias) to use for object encryption. If the KMS key doesn't exist in the same account that's issuing the command, you must use the full Key ARN not the Key ID.  General purpose buckets - If you specify x-amz-server-side-encryption with aws:kms or aws:kms:dsse, this header specifies the ID (Key ID, Key ARN, or Key Alias) of the KMS key to use. If you specify x-amz-server-side-encryption:aws:kms or x-amz-server-side-encryption:aws:kms:dsse, but do not provide x-amz-server-side-encryption-aws-kms-key-id, Amazon S3 uses the Amazon Web Services managed key (aws/s3) to protect the data.  Directory buckets - If you specify x-amz-server-side-encryption with aws:kms, the  x-amz-server-side-encryption-aws-kms-key-id header is implicitly assigned the ID of the KMS symmetric encryption customer managed key that's configured for your directory bucket's default encryption setting. If you want to specify the  x-amz-server-side-encryption-aws-kms-key-id header explicitly, you can only specify it with the ID (Key ID or Key ARN) of the KMS customer managed key that's configured for your directory bucket's default encryption setting. Otherwise, you get an HTTP 400 Bad Request error. Only use the key ID or key ARN. The key alias format of the KMS key isn't supported. Your SSE-KMS configuration can only support 1 customer managed key per directory bucket for the lifetime of the bucket. The Amazon Web Services managed key (aws/s3) isn't supported. 
      */
     SSEKMSKeyId?: SSEKMSKeyId;
     /**
-     * Specifies the Amazon Web Services KMS Encryption Context to use for object encryption. The value of this header is a base64-encoded UTF-8 string holding JSON with the encryption context key-value pairs. This value is stored as object metadata and automatically gets passed on to Amazon Web Services KMS for future GetObject or CopyObject operations on this object. This value must be explicitly added during CopyObject operations.  This functionality is not supported for directory buckets. 
+     * Specifies the Amazon Web Services KMS Encryption Context as an additional encryption context to use for object encryption. The value of this header is a Base64-encoded string of a UTF-8 encoded JSON, which contains the encryption context as key-value pairs. This value is stored as object metadata and automatically gets passed on to Amazon Web Services KMS for future GetObject operations on this object.  General purpose buckets - This value must be explicitly added during CopyObject operations if you want an additional encryption context for your object. For more information, see Encryption context in the Amazon S3 User Guide.  Directory buckets - You can optionally provide an explicit encryption context value. The value must match the default encryption context - the bucket Amazon Resource Name (ARN). An additional encryption context value is not supported. 
      */
     SSEKMSEncryptionContext?: SSEKMSEncryptionContext;
     /**
-     * Specifies whether Amazon S3 should use an S3 Bucket Key for object encryption with server-side encryption using Key Management Service (KMS) keys (SSE-KMS). Setting this header to true causes Amazon S3 to use an S3 Bucket Key for object encryption with SSE-KMS. Specifying this header with a PUT action doesn’t affect bucket-level settings for S3 Bucket Key.  This functionality is not supported for directory buckets. 
+     * Specifies whether Amazon S3 should use an S3 Bucket Key for object encryption with server-side encryption using Key Management Service (KMS) keys (SSE-KMS).  General purpose buckets - Setting this header to true causes Amazon S3 to use an S3 Bucket Key for object encryption with SSE-KMS. Also, specifying this header with a PUT action doesn't affect bucket-level settings for S3 Bucket Key.  Directory buckets - S3 Bucket Keys are always enabled for GET and PUT operations in a directory bucket and can’t be disabled. S3 Bucket Keys aren't supported, when you copy SSE-KMS encrypted objects from general purpose buckets to directory buckets, from directory buckets to general purpose buckets, or between directory buckets, through CopyObject, UploadPartCopy, the Copy operation in Batch Operations, or the import jobs. In this case, Amazon S3 makes a call to KMS every time a copy request is made for a KMS-encrypted object.
      */
     BucketKeyEnabled?: BucketKeyEnabled;
     RequestPayer?: RequestPayer;
@@ -5840,7 +5903,7 @@ declare namespace S3 {
      */
     SourceSelectionCriteria?: SourceSelectionCriteria;
     /**
-     * Optional configuration to replicate existing source bucket objects. For more information, see Replicating Existing Objects in the Amazon S3 User Guide. 
+     * Optional configuration to replicate existing source bucket objects.   This parameter is no longer supported. To replicate existing objects, see Replicating existing objects with S3 Batch Replication in the Amazon S3 User Guide. 
      */
     ExistingObjectReplication?: ExistingObjectReplication;
     /**
@@ -5959,7 +6022,7 @@ declare namespace S3 {
      */
     GlacierJobParameters?: GlacierJobParameters;
     /**
-     *  Amazon S3 Select is no longer available to new customers. Existing customers of Amazon S3 Select can continue to use the feature as usual. Learn more   Type of restore request.
+     * Type of restore request.
      */
     Type?: RestoreRequestType;
     /**
@@ -5971,7 +6034,7 @@ declare namespace S3 {
      */
     Description?: Description;
     /**
-     *  Amazon S3 Select is no longer available to new customers. Existing customers of Amazon S3 Select can continue to use the feature as usual. Learn more   Describes the parameters for Select job types.
+     * Describes the parameters for Select job types.
      */
     SelectParameters?: SelectParameters;
     /**
@@ -6152,7 +6215,7 @@ declare namespace S3 {
      */
     ExpressionType: ExpressionType;
     /**
-     *  Amazon S3 Select is no longer available to new customers. Existing customers of Amazon S3 Select can continue to use the feature as usual. Learn more   The expression that is used to query the object.
+     * The expression that is used to query the object.
      */
     Expression: Expression;
     /**
@@ -6163,11 +6226,11 @@ declare namespace S3 {
   export type ServerSideEncryption = "AES256"|"aws:kms"|"aws:kms:dsse"|string;
   export interface ServerSideEncryptionByDefault {
     /**
-     * Server-side encryption algorithm to use for the default encryption.
+     * Server-side encryption algorithm to use for the default encryption.  For directory buckets, there are only two supported values for server-side encryption: AES256 and aws:kms. 
      */
     SSEAlgorithm: ServerSideEncryption;
     /**
-     * Amazon Web Services Key Management Service (KMS) customer Amazon Web Services KMS key ID to use for the default encryption. This parameter is allowed if and only if SSEAlgorithm is set to aws:kms or aws:kms:dsse. You can specify the key ID, key alias, or the Amazon Resource Name (ARN) of the KMS key.   Key ID: 1234abcd-12ab-34cd-56ef-1234567890ab    Key ARN: arn:aws:kms:us-east-2:111122223333:key/1234abcd-12ab-34cd-56ef-1234567890ab    Key Alias: alias/alias-name    If you use a key ID, you can run into a LogDestination undeliverable error when creating a VPC flow log.  If you are using encryption with cross-account or Amazon Web Services service operations you must use a fully qualified KMS key ARN. For more information, see Using encryption for cross-account operations.  Amazon S3 only supports symmetric encryption KMS keys. For more information, see Asymmetric keys in Amazon Web Services KMS in the Amazon Web Services Key Management Service Developer Guide. 
+     * Amazon Web Services Key Management Service (KMS) customer managed key ID to use for the default encryption.      General purpose buckets - This parameter is allowed if and only if SSEAlgorithm is set to aws:kms or aws:kms:dsse.    Directory buckets - This parameter is allowed if and only if SSEAlgorithm is set to aws:kms.    You can specify the key ID, key alias, or the Amazon Resource Name (ARN) of the KMS key.   Key ID: 1234abcd-12ab-34cd-56ef-1234567890ab    Key ARN: arn:aws:kms:us-east-2:111122223333:key/1234abcd-12ab-34cd-56ef-1234567890ab    Key Alias: alias/alias-name    If you are using encryption with cross-account or Amazon Web Services service operations, you must use a fully qualified KMS key ARN. For more information, see Using encryption for cross-account operations.     General purpose buckets - If you're specifying a customer managed KMS key, we recommend using a fully qualified KMS key ARN. If you use a KMS key alias instead, then KMS resolves the key within the requester’s account. This behavior can result in data that's encrypted with a KMS key that belongs to the requester, and not the bucket owner. Also, if you use a key ID, you can run into a LogDestination undeliverable error when creating a VPC flow log.     Directory buckets - When you specify an KMS customer managed key for encryption in your directory bucket, only use the key ID or key ARN. The key alias format of the KMS key isn't supported.     Amazon S3 only supports symmetric encryption KMS keys. For more information, see Asymmetric keys in Amazon Web Services KMS in the Amazon Web Services Key Management Service Developer Guide. 
      */
     KMSMasterKeyID?: SSEKMSKeyId;
   }
@@ -6183,7 +6246,7 @@ declare namespace S3 {
      */
     ApplyServerSideEncryptionByDefault?: ServerSideEncryptionByDefault;
     /**
-     * Specifies whether Amazon S3 should use an S3 Bucket Key with server-side encryption using KMS (SSE-KMS) for new objects in the bucket. Existing objects are not affected. Setting the BucketKeyEnabled element to true causes Amazon S3 to use an S3 Bucket Key. By default, S3 Bucket Key is not enabled. For more information, see Amazon S3 Bucket Keys in the Amazon S3 User Guide.
+     * Specifies whether Amazon S3 should use an S3 Bucket Key with server-side encryption using KMS (SSE-KMS) for new objects in the bucket. Existing objects are not affected. Setting the BucketKeyEnabled element to true causes Amazon S3 to use an S3 Bucket Key.      General purpose buckets - By default, S3 Bucket Key is not enabled. For more information, see Amazon S3 Bucket Keys in the Amazon S3 User Guide.    Directory buckets - S3 Bucket Keys are always enabled for GET and PUT operations in a directory bucket and can’t be disabled. S3 Bucket Keys aren't supported, when you copy SSE-KMS encrypted objects from general purpose buckets to directory buckets, from directory buckets to general purpose buckets, or between directory buckets, through CopyObject, UploadPartCopy, the Copy operation in Batch Operations, or the import jobs. In this case, Amazon S3 makes a call to KMS every time a copy request is made for a KMS-encrypted object.   
      */
     BucketKeyEnabled?: BucketKeyEnabled;
   }
@@ -6371,6 +6434,7 @@ declare namespace S3 {
      */
     StorageClass?: TransitionStorageClass;
   }
+  export type TransitionDefaultMinimumObjectSize = "varies_by_storage_class"|"all_storage_classes_128K"|string;
   export type TransitionList = Transition[];
   export type TransitionStorageClass = "GLACIER"|"STANDARD_IA"|"ONEZONE_IA"|"INTELLIGENT_TIERING"|"DEEP_ARCHIVE"|"GLACIER_IR"|string;
   export type Type = "CanonicalUser"|"AmazonCustomerByEmail"|"Group"|string;
@@ -6386,7 +6450,7 @@ declare namespace S3 {
      */
     CopyPartResult?: CopyPartResult;
     /**
-     * The server-side encryption algorithm used when you store this object in Amazon S3 (for example, AES256, aws:kms).  For directory buckets, only server-side encryption with Amazon S3 managed keys (SSE-S3) (AES256) is supported. 
+     * The server-side encryption algorithm used when you store this object in Amazon S3 (for example, AES256, aws:kms).
      */
     ServerSideEncryption?: ServerSideEncryption;
     /**
@@ -6398,11 +6462,11 @@ declare namespace S3 {
      */
     SSECustomerKeyMD5?: SSECustomerKeyMD5;
     /**
-     * If present, indicates the ID of the Key Management Service (KMS) symmetric encryption customer managed key that was used for the object.  This functionality is not supported for directory buckets. 
+     * If present, indicates the ID of the KMS key that was used for object encryption.
      */
     SSEKMSKeyId?: SSEKMSKeyId;
     /**
-     * Indicates whether the multipart upload uses an S3 Bucket Key for server-side encryption with Key Management Service (KMS) keys (SSE-KMS).  This functionality is not supported for directory buckets. 
+     * Indicates whether the multipart upload uses an S3 Bucket Key for server-side encryption with Key Management Service (KMS) keys (SSE-KMS).
      */
     BucketKeyEnabled?: BucketKeyEnabled;
     RequestCharged?: RequestCharged;
@@ -6484,7 +6548,7 @@ declare namespace S3 {
   }
   export interface UploadPartOutput {
     /**
-     * The server-side encryption algorithm used when you store this object in Amazon S3 (for example, AES256, aws:kms).  For directory buckets, only server-side encryption with Amazon S3 managed keys (SSE-S3) (AES256) is supported. 
+     * The server-side encryption algorithm used when you store this object in Amazon S3 (for example, AES256, aws:kms).
      */
     ServerSideEncryption?: ServerSideEncryption;
     /**
@@ -6492,11 +6556,11 @@ declare namespace S3 {
      */
     ETag?: ETag;
     /**
-     * The base64-encoded, 32-bit CRC32 checksum of the object. This will only be present if it was uploaded with the object. When you use an API operation on an object that was uploaded using multipart uploads, this value may not be a direct checksum value of the full object. Instead, it's a calculation based on the checksum values of each individual part. For more information about how checksums are calculated with multipart uploads, see  Checking object integrity in the Amazon S3 User Guide.
+     * The base64-encoded, 32-bit CRC-32 checksum of the object. This will only be present if it was uploaded with the object. When you use an API operation on an object that was uploaded using multipart uploads, this value may not be a direct checksum value of the full object. Instead, it's a calculation based on the checksum values of each individual part. For more information about how checksums are calculated with multipart uploads, see  Checking object integrity in the Amazon S3 User Guide.
      */
     ChecksumCRC32?: ChecksumCRC32;
     /**
-     * The base64-encoded, 32-bit CRC32C checksum of the object. This will only be present if it was uploaded with the object. When you use an API operation on an object that was uploaded using multipart uploads, this value may not be a direct checksum value of the full object. Instead, it's a calculation based on the checksum values of each individual part. For more information about how checksums are calculated with multipart uploads, see  Checking object integrity in the Amazon S3 User Guide.
+     * The base64-encoded, 32-bit CRC-32C checksum of the object. This will only be present if it was uploaded with the object. When you use an API operation on an object that was uploaded using multipart uploads, this value may not be a direct checksum value of the full object. Instead, it's a calculation based on the checksum values of each individual part. For more information about how checksums are calculated with multipart uploads, see  Checking object integrity in the Amazon S3 User Guide.
      */
     ChecksumCRC32C?: ChecksumCRC32C;
     /**
@@ -6516,11 +6580,11 @@ declare namespace S3 {
      */
     SSECustomerKeyMD5?: SSECustomerKeyMD5;
     /**
-     * If present, indicates the ID of the Key Management Service (KMS) symmetric encryption customer managed key that was used for the object.  This functionality is not supported for directory buckets. 
+     * If present, indicates the ID of the KMS key that was used for object encryption.
      */
     SSEKMSKeyId?: SSEKMSKeyId;
     /**
-     * Indicates whether the multipart upload uses an S3 Bucket Key for server-side encryption with Key Management Service (KMS) keys (SSE-KMS).  This functionality is not supported for directory buckets. 
+     * Indicates whether the multipart upload uses an S3 Bucket Key for server-side encryption with Key Management Service (KMS) keys (SSE-KMS).
      */
     BucketKeyEnabled?: BucketKeyEnabled;
     RequestCharged?: RequestCharged;
@@ -6547,11 +6611,11 @@ declare namespace S3 {
      */
     ChecksumAlgorithm?: ChecksumAlgorithm;
     /**
-     * This header can be used as a data integrity check to verify that the data received is the same data that was originally sent. This header specifies the base64-encoded, 32-bit CRC32 checksum of the object. For more information, see Checking object integrity in the Amazon S3 User Guide.
+     * This header can be used as a data integrity check to verify that the data received is the same data that was originally sent. This header specifies the base64-encoded, 32-bit CRC-32 checksum of the object. For more information, see Checking object integrity in the Amazon S3 User Guide.
      */
     ChecksumCRC32?: ChecksumCRC32;
     /**
-     * This header can be used as a data integrity check to verify that the data received is the same data that was originally sent. This header specifies the base64-encoded, 32-bit CRC32C checksum of the object. For more information, see Checking object integrity in the Amazon S3 User Guide.
+     * This header can be used as a data integrity check to verify that the data received is the same data that was originally sent. This header specifies the base64-encoded, 32-bit CRC-32C checksum of the object. For more information, see Checking object integrity in the Amazon S3 User Guide.
      */
     ChecksumCRC32C?: ChecksumCRC32C;
     /**
@@ -6683,11 +6747,11 @@ declare namespace S3 {
      */
     ContentType?: ContentType;
     /**
-     * This header can be used as a data integrity check to verify that the data received is the same data that was originally sent. This specifies the base64-encoded, 32-bit CRC32 checksum of the object returned by the Object Lambda function. This may not match the checksum for the object stored in Amazon S3. Amazon S3 will perform validation of the checksum values only when the original GetObject request required checksum validation. For more information about checksums, see Checking object integrity in the Amazon S3 User Guide. Only one checksum header can be specified at a time. If you supply multiple checksum headers, this request will fail. 
+     * This header can be used as a data integrity check to verify that the data received is the same data that was originally sent. This specifies the base64-encoded, 32-bit CRC-32 checksum of the object returned by the Object Lambda function. This may not match the checksum for the object stored in Amazon S3. Amazon S3 will perform validation of the checksum values only when the original GetObject request required checksum validation. For more information about checksums, see Checking object integrity in the Amazon S3 User Guide. Only one checksum header can be specified at a time. If you supply multiple checksum headers, this request will fail. 
      */
     ChecksumCRC32?: ChecksumCRC32;
     /**
-     * This header can be used as a data integrity check to verify that the data received is the same data that was originally sent. This specifies the base64-encoded, 32-bit CRC32C checksum of the object returned by the Object Lambda function. This may not match the checksum for the object stored in Amazon S3. Amazon S3 will perform validation of the checksum values only when the original GetObject request required checksum validation. For more information about checksums, see Checking object integrity in the Amazon S3 User Guide. Only one checksum header can be specified at a time. If you supply multiple checksum headers, this request will fail.
+     * This header can be used as a data integrity check to verify that the data received is the same data that was originally sent. This specifies the base64-encoded, 32-bit CRC-32C checksum of the object returned by the Object Lambda function. This may not match the checksum for the object stored in Amazon S3. Amazon S3 will perform validation of the checksum values only when the original GetObject request required checksum validation. For more information about checksums, see Checking object integrity in the Amazon S3 User Guide. Only one checksum header can be specified at a time. If you supply multiple checksum headers, this request will fail.
      */
     ChecksumCRC32C?: ChecksumCRC32C;
     /**