cdk-lambda-subminute 2.0.470 → 2.0.472

package/node_modules/aws-sdk/clients/ecs.d.ts

@@ -37,11 +37,11 @@ declare class ECS extends Service {
    */
   createService(callback?: (err: AWSError, data: ECS.Types.CreateServiceResponse) => void): Request<ECS.Types.CreateServiceResponse, AWSError>;
   /**
-   * Create a task set in the specified cluster and service. This is used when a service uses the EXTERNAL deployment controller type. For more information, see Amazon ECS deployment types in the Amazon Elastic Container Service Developer Guide.  On March 21, 2024, a change was made to resolve the task definition revision before authorization. When a task definition revision is not specified, authorization will occur using the latest revision of a task definition.  For information about the maximum number of task sets and otther quotas, see Amazon ECS service quotas in the Amazon Elastic Container Service Developer Guide.
+   * Create a task set in the specified cluster and service. This is used when a service uses the EXTERNAL deployment controller type. For more information, see Amazon ECS deployment types in the Amazon Elastic Container Service Developer Guide.  On March 21, 2024, a change was made to resolve the task definition revision before authorization. When a task definition revision is not specified, authorization will occur using the latest revision of a task definition.  For information about the maximum number of task sets and other quotas, see Amazon ECS service quotas in the Amazon Elastic Container Service Developer Guide.
    */
   createTaskSet(params: ECS.Types.CreateTaskSetRequest, callback?: (err: AWSError, data: ECS.Types.CreateTaskSetResponse) => void): Request<ECS.Types.CreateTaskSetResponse, AWSError>;
   /**
-   * Create a task set in the specified cluster and service. This is used when a service uses the EXTERNAL deployment controller type. For more information, see Amazon ECS deployment types in the Amazon Elastic Container Service Developer Guide.  On March 21, 2024, a change was made to resolve the task definition revision before authorization. When a task definition revision is not specified, authorization will occur using the latest revision of a task definition.  For information about the maximum number of task sets and otther quotas, see Amazon ECS service quotas in the Amazon Elastic Container Service Developer Guide.
+   * Create a task set in the specified cluster and service. This is used when a service uses the EXTERNAL deployment controller type. For more information, see Amazon ECS deployment types in the Amazon Elastic Container Service Developer Guide.  On March 21, 2024, a change was made to resolve the task definition revision before authorization. When a task definition revision is not specified, authorization will occur using the latest revision of a task definition.  For information about the maximum number of task sets and other quotas, see Amazon ECS service quotas in the Amazon Elastic Container Service Developer Guide.
    */
   createTaskSet(callback?: (err: AWSError, data: ECS.Types.CreateTaskSetResponse) => void): Request<ECS.Types.CreateTaskSetResponse, AWSError>;
   /**
@@ -317,11 +317,11 @@ declare class ECS extends Service {
    */
   registerContainerInstance(callback?: (err: AWSError, data: ECS.Types.RegisterContainerInstanceResponse) => void): Request<ECS.Types.RegisterContainerInstanceResponse, AWSError>;
   /**
-   * Registers a new task definition from the supplied family and containerDefinitions. Optionally, you can add data volumes to your containers with the volumes parameter. For more information about task definition parameters and defaults, see Amazon ECS Task Definitions in the Amazon Elastic Container Service Developer Guide. You can specify a role for your task with the taskRoleArn parameter. When you specify a role for a task, its containers can then use the latest versions of the CLI or SDKs to make API requests to the Amazon Web Services services that are specified in the policy that's associated with the role. For more information, see IAM Roles for Tasks in the Amazon Elastic Container Service Developer Guide. You can specify a Docker networking mode for the containers in your task definition with the networkMode parameter. The available network modes correspond to those described in Network settings in the Docker run reference. If you specify the awsvpc network mode, the task is allocated an elastic network interface, and you must specify a NetworkConfiguration when you create a service or run a task with the task definition. For more information, see Task Networking in the Amazon Elastic Container Service Developer Guide.
+   * Registers a new task definition from the supplied family and containerDefinitions. Optionally, you can add data volumes to your containers with the volumes parameter. For more information about task definition parameters and defaults, see Amazon ECS Task Definitions in the Amazon Elastic Container Service Developer Guide. You can specify a role for your task with the taskRoleArn parameter. When you specify a role for a task, its containers can then use the latest versions of the CLI or SDKs to make API requests to the Amazon Web Services services that are specified in the policy that's associated with the role. For more information, see IAM Roles for Tasks in the Amazon Elastic Container Service Developer Guide. You can specify a Docker networking mode for the containers in your task definition with the networkMode parameter. If you specify the awsvpc network mode, the task is allocated an elastic network interface, and you must specify a NetworkConfiguration when you create a service or run a task with the task definition. For more information, see Task Networking in the Amazon Elastic Container Service Developer Guide.
    */
   registerTaskDefinition(params: ECS.Types.RegisterTaskDefinitionRequest, callback?: (err: AWSError, data: ECS.Types.RegisterTaskDefinitionResponse) => void): Request<ECS.Types.RegisterTaskDefinitionResponse, AWSError>;
   /**
-   * Registers a new task definition from the supplied family and containerDefinitions. Optionally, you can add data volumes to your containers with the volumes parameter. For more information about task definition parameters and defaults, see Amazon ECS Task Definitions in the Amazon Elastic Container Service Developer Guide. You can specify a role for your task with the taskRoleArn parameter. When you specify a role for a task, its containers can then use the latest versions of the CLI or SDKs to make API requests to the Amazon Web Services services that are specified in the policy that's associated with the role. For more information, see IAM Roles for Tasks in the Amazon Elastic Container Service Developer Guide. You can specify a Docker networking mode for the containers in your task definition with the networkMode parameter. The available network modes correspond to those described in Network settings in the Docker run reference. If you specify the awsvpc network mode, the task is allocated an elastic network interface, and you must specify a NetworkConfiguration when you create a service or run a task with the task definition. For more information, see Task Networking in the Amazon Elastic Container Service Developer Guide.
+   * Registers a new task definition from the supplied family and containerDefinitions. Optionally, you can add data volumes to your containers with the volumes parameter. For more information about task definition parameters and defaults, see Amazon ECS Task Definitions in the Amazon Elastic Container Service Developer Guide. You can specify a role for your task with the taskRoleArn parameter. When you specify a role for a task, its containers can then use the latest versions of the CLI or SDKs to make API requests to the Amazon Web Services services that are specified in the policy that's associated with the role. For more information, see IAM Roles for Tasks in the Amazon Elastic Container Service Developer Guide. You can specify a Docker networking mode for the containers in your task definition with the networkMode parameter. If you specify the awsvpc network mode, the task is allocated an elastic network interface, and you must specify a NetworkConfiguration when you create a service or run a task with the task definition. For more information, see Task Networking in the Amazon Elastic Container Service Developer Guide.
    */
   registerTaskDefinition(callback?: (err: AWSError, data: ECS.Types.RegisterTaskDefinitionResponse) => void): Request<ECS.Types.RegisterTaskDefinitionResponse, AWSError>;
   /**
@@ -828,11 +828,11 @@ declare namespace ECS {
   export type ContainerCondition = "START"|"COMPLETE"|"SUCCESS"|"HEALTHY"|string;
   export interface ContainerDefinition {
     /**
-     * The name of a container. If you're linking multiple containers together in a task definition, the name of one container can be entered in the links of another container to connect the containers. Up to 255 letters (uppercase and lowercase), numbers, underscores, and hyphens are allowed. This parameter maps to name in the Create a container section of the Docker Remote API and the --name option to docker run. 
+     * The name of a container. If you're linking multiple containers together in a task definition, the name of one container can be entered in the links of another container to connect the containers. Up to 255 letters (uppercase and lowercase), numbers, underscores, and hyphens are allowed. This parameter maps to name in tthe docker create-container command and the --name option to docker run. 
      */
     name?: String;
     /**
-     * The image used to start a container. This string is passed directly to the Docker daemon. By default, images in the Docker Hub registry are available. Other repositories are specified with either  repository-url/image:tag  or  repository-url/image@digest . Up to 255 letters (uppercase and lowercase), numbers, hyphens, underscores, colons, periods, forward slashes, and number signs are allowed. This parameter maps to Image in the Create a container section of the Docker Remote API and the IMAGE parameter of docker run.   When a new task starts, the Amazon ECS container agent pulls the latest version of the specified image and tag for the container to use. However, subsequent updates to a repository image aren't propagated to already running tasks.   Images in Amazon ECR repositories can be specified by either using the full registry/repository:tag or registry/repository@digest. For example, 012345678910.dkr.ecr.&lt;region-name&gt;.amazonaws.com/&lt;repository-name&gt;:latest or 012345678910.dkr.ecr.&lt;region-name&gt;.amazonaws.com/&lt;repository-name&gt;@sha256:94afd1f2e64d908bc90dbca0035a5b567EXAMPLE.    Images in official repositories on Docker Hub use a single name (for example, ubuntu or mongo).   Images in other repositories on Docker Hub are qualified with an organization name (for example, amazon/amazon-ecs-agent).   Images in other online repositories are qualified further by a domain name (for example, quay.io/assemblyline/ubuntu).  
+     * The image used to start a container. This string is passed directly to the Docker daemon. By default, images in the Docker Hub registry are available. Other repositories are specified with either  repository-url/image:tag  or  repository-url/image@digest . Up to 255 letters (uppercase and lowercase), numbers, hyphens, underscores, colons, periods, forward slashes, and number signs are allowed. This parameter maps to Image in the docker create-container command and the IMAGE parameter of docker run.   When a new task starts, the Amazon ECS container agent pulls the latest version of the specified image and tag for the container to use. However, subsequent updates to a repository image aren't propagated to already running tasks.   Images in Amazon ECR repositories can be specified by either using the full registry/repository:tag or registry/repository@digest. For example, 012345678910.dkr.ecr.&lt;region-name&gt;.amazonaws.com/&lt;repository-name&gt;:latest or 012345678910.dkr.ecr.&lt;region-name&gt;.amazonaws.com/&lt;repository-name&gt;@sha256:94afd1f2e64d908bc90dbca0035a5b567EXAMPLE.    Images in official repositories on Docker Hub use a single name (for example, ubuntu or mongo).   Images in other repositories on Docker Hub are qualified with an organization name (for example, amazon/amazon-ecs-agent).   Images in other online repositories are qualified further by a domain name (for example, quay.io/assemblyline/ubuntu).  
      */
     image?: String;
     /**
@@ -840,23 +840,23 @@ declare namespace ECS {
      */
     repositoryCredentials?: RepositoryCredentials;
     /**
-     * The number of cpu units reserved for the container. This parameter maps to CpuShares in the Create a container section of the Docker Remote API and the --cpu-shares option to docker run. This field is optional for tasks using the Fargate launch type, and the only requirement is that the total amount of CPU reserved for all containers within a task be lower than the task-level cpu value.  You can determine the number of CPU units that are available per EC2 instance type by multiplying the vCPUs listed for that instance type on the Amazon EC2 Instances detail page by 1,024.  Linux containers share unallocated CPU units with other containers on the container instance with the same ratio as their allocated amount. For example, if you run a single-container task on a single-core instance type with 512 CPU units specified for that container, and that's the only task running on the container instance, that container could use the full 1,024 CPU unit share at any given time. However, if you launched another copy of the same task on that container instance, each task is guaranteed a minimum of 512 CPU units when needed. Moreover, each container could float to higher CPU usage if the other container was not using it. If both tasks were 100% active all of the time, they would be limited to 512 CPU units. On Linux container instances, the Docker daemon on the container instance uses the CPU value to calculate the relative CPU share ratios for running containers. For more information, see CPU share constraint in the Docker documentation. The minimum valid CPU share value that the Linux kernel allows is 2. However, the CPU parameter isn't required, and you can use CPU values below 2 in your container definitions. For CPU values below 2 (including null), the behavior varies based on your Amazon ECS container agent version:    Agent versions less than or equal to 1.1.0: Null and zero CPU values are passed to Docker as 0, which Docker then converts to 1,024 CPU shares. CPU values of 1 are passed to Docker as 1, which the Linux kernel converts to two CPU shares.    Agent versions greater than or equal to 1.2.0: Null, zero, and CPU values of 1 are passed to Docker as 2.   On Windows container instances, the CPU limit is enforced as an absolute limit, or a quota. Windows containers only have access to the specified amount of CPU that's described in the task definition. A null or zero CPU value is passed to Docker as 0, which Windows interprets as 1% of one CPU.
+     * The number of cpu units reserved for the container. This parameter maps to CpuShares in the docker create-container commandand the --cpu-shares option to docker run. This field is optional for tasks using the Fargate launch type, and the only requirement is that the total amount of CPU reserved for all containers within a task be lower than the task-level cpu value.  You can determine the number of CPU units that are available per EC2 instance type by multiplying the vCPUs listed for that instance type on the Amazon EC2 Instances detail page by 1,024.  Linux containers share unallocated CPU units with other containers on the container instance with the same ratio as their allocated amount. For example, if you run a single-container task on a single-core instance type with 512 CPU units specified for that container, and that's the only task running on the container instance, that container could use the full 1,024 CPU unit share at any given time. However, if you launched another copy of the same task on that container instance, each task is guaranteed a minimum of 512 CPU units when needed. Moreover, each container could float to higher CPU usage if the other container was not using it. If both tasks were 100% active all of the time, they would be limited to 512 CPU units. On Linux container instances, the Docker daemon on the container instance uses the CPU value to calculate the relative CPU share ratios for running containers. The minimum valid CPU share value that the Linux kernel allows is 2, and the maximum valid CPU share value that the Linux kernel allows is 262144. However, the CPU parameter isn't required, and you can use CPU values below 2 or above 262144 in your container definitions. For CPU values below 2 (including null) or above 262144, the behavior varies based on your Amazon ECS container agent version:    Agent versions less than or equal to 1.1.0: Null and zero CPU values are passed to Docker as 0, which Docker then converts to 1,024 CPU shares. CPU values of 1 are passed to Docker as 1, which the Linux kernel converts to two CPU shares.    Agent versions greater than or equal to 1.2.0: Null, zero, and CPU values of 1 are passed to Docker as 2.    Agent versions greater than or equal to 1.84.0: CPU values greater than 256 vCPU are passed to Docker as 256, which is equivalent to 262144 CPU shares.   On Windows container instances, the CPU limit is enforced as an absolute limit, or a quota. Windows containers only have access to the specified amount of CPU that's described in the task definition. A null or zero CPU value is passed to Docker as 0, which Windows interprets as 1% of one CPU.
      */
     cpu?: Integer;
     /**
-     * The amount (in MiB) of memory to present to the container. If your container attempts to exceed the memory specified here, the container is killed. The total amount of memory reserved for all containers within a task must be lower than the task memory value, if one is specified. This parameter maps to Memory in the Create a container section of the Docker Remote API and the --memory option to docker run. If using the Fargate launch type, this parameter is optional. If using the EC2 launch type, you must specify either a task-level memory value or a container-level memory value. If you specify both a container-level memory and memoryReservation value, memory must be greater than memoryReservation. If you specify memoryReservation, then that value is subtracted from the available memory resources for the container instance where the container is placed. Otherwise, the value of memory is used. The Docker 20.10.0 or later daemon reserves a minimum of 6 MiB of memory for a container. So, don't specify less than 6 MiB of memory for your containers.  The Docker 19.03.13-ce or earlier daemon reserves a minimum of 4 MiB of memory for a container. So, don't specify less than 4 MiB of memory for your containers.
+     * The amount (in MiB) of memory to present to the container. If your container attempts to exceed the memory specified here, the container is killed. The total amount of memory reserved for all containers within a task must be lower than the task memory value, if one is specified. This parameter maps to Memory in thethe docker create-container command and the --memory option to docker run. If using the Fargate launch type, this parameter is optional. If using the EC2 launch type, you must specify either a task-level memory value or a container-level memory value. If you specify both a container-level memory and memoryReservation value, memory must be greater than memoryReservation. If you specify memoryReservation, then that value is subtracted from the available memory resources for the container instance where the container is placed. Otherwise, the value of memory is used. The Docker 20.10.0 or later daemon reserves a minimum of 6 MiB of memory for a container. So, don't specify less than 6 MiB of memory for your containers.  The Docker 19.03.13-ce or earlier daemon reserves a minimum of 4 MiB of memory for a container. So, don't specify less than 4 MiB of memory for your containers.
      */
     memory?: BoxedInteger;
     /**
-     * The soft limit (in MiB) of memory to reserve for the container. When system memory is under heavy contention, Docker attempts to keep the container memory to this soft limit. However, your container can consume more memory when it needs to, up to either the hard limit specified with the memory parameter (if applicable), or all of the available memory on the container instance, whichever comes first. This parameter maps to MemoryReservation in the Create a container section of the Docker Remote API and the --memory-reservation option to docker run. If a task-level memory value is not specified, you must specify a non-zero integer for one or both of memory or memoryReservation in a container definition. If you specify both, memory must be greater than memoryReservation. If you specify memoryReservation, then that value is subtracted from the available memory resources for the container instance where the container is placed. Otherwise, the value of memory is used. For example, if your container normally uses 128 MiB of memory, but occasionally bursts to 256 MiB of memory for short periods of time, you can set a memoryReservation of 128 MiB, and a memory hard limit of 300 MiB. This configuration would allow the container to only reserve 128 MiB of memory from the remaining resources on the container instance, but also allow the container to consume more memory resources when needed. The Docker 20.10.0 or later daemon reserves a minimum of 6 MiB of memory for a container. So, don't specify less than 6 MiB of memory for your containers.  The Docker 19.03.13-ce or earlier daemon reserves a minimum of 4 MiB of memory for a container. So, don't specify less than 4 MiB of memory for your containers.
+     * The soft limit (in MiB) of memory to reserve for the container. When system memory is under heavy contention, Docker attempts to keep the container memory to this soft limit. However, your container can consume more memory when it needs to, up to either the hard limit specified with the memory parameter (if applicable), or all of the available memory on the container instance, whichever comes first. This parameter maps to MemoryReservation in the the docker create-container command and the --memory-reservation option to docker run. If a task-level memory value is not specified, you must specify a non-zero integer for one or both of memory or memoryReservation in a container definition. If you specify both, memory must be greater than memoryReservation. If you specify memoryReservation, then that value is subtracted from the available memory resources for the container instance where the container is placed. Otherwise, the value of memory is used. For example, if your container normally uses 128 MiB of memory, but occasionally bursts to 256 MiB of memory for short periods of time, you can set a memoryReservation of 128 MiB, and a memory hard limit of 300 MiB. This configuration would allow the container to only reserve 128 MiB of memory from the remaining resources on the container instance, but also allow the container to consume more memory resources when needed. The Docker 20.10.0 or later daemon reserves a minimum of 6 MiB of memory for a container. So, don't specify less than 6 MiB of memory for your containers.  The Docker 19.03.13-ce or earlier daemon reserves a minimum of 4 MiB of memory for a container. So, don't specify less than 4 MiB of memory for your containers.
      */
     memoryReservation?: BoxedInteger;
     /**
-     * The links parameter allows containers to communicate with each other without the need for port mappings. This parameter is only supported if the network mode of a task definition is bridge. The name:internalName construct is analogous to name:alias in Docker links. Up to 255 letters (uppercase and lowercase), numbers, underscores, and hyphens are allowed. For more information about linking Docker containers, go to Legacy container links in the Docker documentation. This parameter maps to Links in the Create a container section of the Docker Remote API and the --link option to docker run.  This parameter is not supported for Windows containers.   Containers that are collocated on a single container instance may be able to communicate with each other without requiring links or host port mappings. Network isolation is achieved on the container instance using security groups and VPC settings. 
+     * The links parameter allows containers to communicate with each other without the need for port mappings. This parameter is only supported if the network mode of a task definition is bridge. The name:internalName construct is analogous to name:alias in Docker links. Up to 255 letters (uppercase and lowercase), numbers, underscores, and hyphens are allowed.. This parameter maps to Links in the docker create-container command and the --link option to docker run.  This parameter is not supported for Windows containers.   Containers that are collocated on a single container instance may be able to communicate with each other without requiring links or host port mappings. Network isolation is achieved on the container instance using security groups and VPC settings. 
      */
     links?: StringList;
     /**
-     * The list of port mappings for the container. Port mappings allow containers to access ports on the host container instance to send or receive traffic. For task definitions that use the awsvpc network mode, only specify the containerPort. The hostPort can be left blank or it must be the same value as the containerPort. Port mappings on Windows use the NetNAT gateway address rather than localhost. There's no loopback for port mappings on Windows, so you can't access a container's mapped port from the host itself.  This parameter maps to PortBindings in the Create a container section of the Docker Remote API and the --publish option to docker run. If the network mode of a task definition is set to none, then you can't specify port mappings. If the network mode of a task definition is set to host, then host ports must either be undefined or they must match the container port in the port mapping.  After a task reaches the RUNNING status, manual and automatic host and container port assignments are visible in the Network Bindings section of a container description for a selected task in the Amazon ECS console. The assignments are also visible in the networkBindings section DescribeTasks responses. 
+     * The list of port mappings for the container. Port mappings allow containers to access ports on the host container instance to send or receive traffic. For task definitions that use the awsvpc network mode, only specify the containerPort. The hostPort can be left blank or it must be the same value as the containerPort. Port mappings on Windows use the NetNAT gateway address rather than localhost. There's no loopback for port mappings on Windows, so you can't access a container's mapped port from the host itself.  This parameter maps to PortBindings in the the docker create-container command and the --publish option to docker run. If the network mode of a task definition is set to none, then you can't specify port mappings. If the network mode of a task definition is set to host, then host ports must either be undefined or they must match the container port in the port mapping.  After a task reaches the RUNNING status, manual and automatic host and container port assignments are visible in the Network Bindings section of a container description for a selected task in the Amazon ECS console. The assignments are also visible in the networkBindings section DescribeTasks responses. 
      */
     portMappings?: PortMappingList;
     /**
@@ -864,27 +864,31 @@ declare namespace ECS {
      */
     essential?: BoxedBoolean;
     /**
-     *  Early versions of the Amazon ECS container agent don't properly handle entryPoint parameters. If you have problems using entryPoint, update your container agent or enter your commands and arguments as command array items instead.  The entry point that's passed to the container. This parameter maps to Entrypoint in the Create a container section of the Docker Remote API and the --entrypoint option to docker run. For more information, see https://docs.docker.com/engine/reference/builder/#entrypoint.
+     * The restart policy for a container. When you set up a restart policy, Amazon ECS can restart the container without needing to replace the task. For more information, see Restart individual containers in Amazon ECS tasks with container restart policies in the Amazon Elastic Container Service Developer Guide.
+     */
+    restartPolicy?: ContainerRestartPolicy;
+    /**
+     *  Early versions of the Amazon ECS container agent don't properly handle entryPoint parameters. If you have problems using entryPoint, update your container agent or enter your commands and arguments as command array items instead.  The entry point that's passed to the container. This parameter maps to Entrypoint in tthe docker create-container command and the --entrypoint option to docker run.
      */
     entryPoint?: StringList;
     /**
-     * The command that's passed to the container. This parameter maps to Cmd in the Create a container section of the Docker Remote API and the COMMAND parameter to docker run. For more information, see https://docs.docker.com/engine/reference/builder/#cmd. If there are multiple arguments, each argument is a separated string in the array.
+     * The command that's passed to the container. This parameter maps to Cmd in the docker create-container command and the COMMAND parameter to docker run. If there are multiple arguments, each argument is a separated string in the array.
      */
     command?: StringList;
     /**
-     * The environment variables to pass to a container. This parameter maps to Env in the Create a container section of the Docker Remote API and the --env option to docker run.  We don't recommend that you use plaintext environment variables for sensitive information, such as credential data. 
+     * The environment variables to pass to a container. This parameter maps to Env in the docker create-container command and the --env option to docker run.  We don't recommend that you use plaintext environment variables for sensitive information, such as credential data. 
      */
     environment?: EnvironmentVariables;
     /**
-     * A list of files containing the environment variables to pass to a container. This parameter maps to the --env-file option to docker run. You can specify up to ten environment files. The file must have a .env file extension. Each line in an environment file contains an environment variable in VARIABLE=VALUE format. Lines beginning with # are treated as comments and are ignored. For more information about the environment variable file syntax, see Declare default environment variables in file. If there are environment variables specified using the environment parameter in a container definition, they take precedence over the variables contained within an environment file. If multiple environment files are specified that contain the same variable, they're processed from the top down. We recommend that you use unique variable names. For more information, see Specifying Environment Variables in the Amazon Elastic Container Service Developer Guide.
+     * A list of files containing the environment variables to pass to a container. This parameter maps to the --env-file option to docker run. You can specify up to ten environment files. The file must have a .env file extension. Each line in an environment file contains an environment variable in VARIABLE=VALUE format. Lines beginning with # are treated as comments and are ignored. If there are environment variables specified using the environment parameter in a container definition, they take precedence over the variables contained within an environment file. If multiple environment files are specified that contain the same variable, they're processed from the top down. We recommend that you use unique variable names. For more information, see Specifying Environment Variables in the Amazon Elastic Container Service Developer Guide.
      */
     environmentFiles?: EnvironmentFiles;
     /**
-     * The mount points for data volumes in your container. This parameter maps to Volumes in the Create a container section of the Docker Remote API and the --volume option to docker run. Windows containers can mount whole directories on the same drive as $env:ProgramData. Windows containers can't mount directories on a different drive, and mount point can't be across drives.
+     * The mount points for data volumes in your container. This parameter maps to Volumes in the the docker create-container command and the --volume option to docker run. Windows containers can mount whole directories on the same drive as $env:ProgramData. Windows containers can't mount directories on a different drive, and mount point can't be across drives.
      */
     mountPoints?: MountPointList;
     /**
-     * Data volumes to mount from another container. This parameter maps to VolumesFrom in the Create a container section of the Docker Remote API and the --volumes-from option to docker run.
+     * Data volumes to mount from another container. This parameter maps to VolumesFrom in tthe docker create-container command and the --volumes-from option to docker run.
      */
     volumesFrom?: VolumeFromList;
     /**
@@ -900,7 +904,7 @@ declare namespace ECS {
      */
     dependsOn?: ContainerDependencies;
     /**
-     * Time duration (in seconds) to wait before giving up on resolving dependencies for a container. For example, you specify two containers in a task definition with containerA having a dependency on containerB reaching a COMPLETE, SUCCESS, or HEALTHY status. If a startTimeout value is specified for containerB and it doesn't reach the desired status within that time then containerA gives up and not start. This results in the task transitioning to a STOPPED state.  When the ECS_CONTAINER_START_TIMEOUT container agent configuration variable is used, it's enforced independently from this start timeout value.  For tasks using the Fargate launch type, the task or service requires the following platforms:   Linux platform version 1.3.0 or later.   Windows platform version 1.0.0 or later.   For tasks using the EC2 launch type, your container instances require at least version 1.26.0 of the container agent to use a container start timeout value. However, we recommend using the latest container agent version. For information about checking your agent version and updating to the latest version, see Updating the Amazon ECS Container Agent in the Amazon Elastic Container Service Developer Guide. If you're using an Amazon ECS-optimized Linux AMI, your instance needs at least version 1.26.0-1 of the ecs-init package. If your container instances are launched from version 20190301 or later, then they contain the required versions of the container agent and ecs-init. For more information, see Amazon ECS-optimized Linux AMI in the Amazon Elastic Container Service Developer Guide. The valid values are 2-120 seconds.
+     * Time duration (in seconds) to wait before giving up on resolving dependencies for a container. For example, you specify two containers in a task definition with containerA having a dependency on containerB reaching a COMPLETE, SUCCESS, or HEALTHY status. If a startTimeout value is specified for containerB and it doesn't reach the desired status within that time then containerA gives up and not start. This results in the task transitioning to a STOPPED state.  When the ECS_CONTAINER_START_TIMEOUT container agent configuration variable is used, it's enforced independently from this start timeout value.  For tasks using the Fargate launch type, the task or service requires the following platforms:   Linux platform version 1.3.0 or later.   Windows platform version 1.0.0 or later.   For tasks using the EC2 launch type, your container instances require at least version 1.26.0 of the container agent to use a container start timeout value. However, we recommend using the latest container agent version. For information about checking your agent version and updating to the latest version, see Updating the Amazon ECS Container Agent in the Amazon Elastic Container Service Developer Guide. If you're using an Amazon ECS-optimized Linux AMI, your instance needs at least version 1.26.0-1 of the ecs-init package. If your container instances are launched from version 20190301 or later, then they contain the required versions of the container agent and ecs-init. For more information, see Amazon ECS-optimized Linux AMI in the Amazon Elastic Container Service Developer Guide. The valid values for Fargate are 2-120 seconds.
      */
     startTimeout?: BoxedInteger;
     /**
@@ -908,71 +912,71 @@ declare namespace ECS {
      */
     stopTimeout?: BoxedInteger;
     /**
-     * The hostname to use for your container. This parameter maps to Hostname in the Create a container section of the Docker Remote API and the --hostname option to docker run.  The hostname parameter is not supported if you're using the awsvpc network mode. 
+     * The hostname to use for your container. This parameter maps to Hostname in thethe docker create-container command and the --hostname option to docker run.  The hostname parameter is not supported if you're using the awsvpc network mode. 
      */
     hostname?: String;
     /**
-     * The user to use inside the container. This parameter maps to User in the Create a container section of the Docker Remote API and the --user option to docker run.  When running tasks using the host network mode, don't run containers using the root user (UID 0). We recommend using a non-root user for better security.  You can specify the user using the following formats. If specifying a UID or GID, you must specify it as a positive integer.    user     user:group     uid     uid:gid     user:gid     uid:group     This parameter is not supported for Windows containers. 
+     * The user to use inside the container. This parameter maps to User in the docker create-container command and the --user option to docker run.  When running tasks using the host network mode, don't run containers using the root user (UID 0). We recommend using a non-root user for better security.  You can specify the user using the following formats. If specifying a UID or GID, you must specify it as a positive integer.    user     user:group     uid     uid:gid     user:gid     uid:group     This parameter is not supported for Windows containers. 
      */
     user?: String;
     /**
-     * The working directory to run commands inside the container in. This parameter maps to WorkingDir in the Create a container section of the Docker Remote API and the --workdir option to docker run.
+     * The working directory to run commands inside the container in. This parameter maps to WorkingDir in the docker create-container command and the --workdir option to docker run.
      */
     workingDirectory?: String;
     /**
-     * When this parameter is true, networking is off within the container. This parameter maps to NetworkDisabled in the Create a container section of the Docker Remote API.  This parameter is not supported for Windows containers. 
+     * When this parameter is true, networking is off within the container. This parameter maps to NetworkDisabled in the docker create-container command.  This parameter is not supported for Windows containers. 
      */
     disableNetworking?: BoxedBoolean;
     /**
-     * When this parameter is true, the container is given elevated privileges on the host container instance (similar to the root user). This parameter maps to Privileged in the Create a container section of the Docker Remote API and the --privileged option to docker run.  This parameter is not supported for Windows containers or tasks run on Fargate. 
+     * When this parameter is true, the container is given elevated privileges on the host container instance (similar to the root user). This parameter maps to Privileged in the the docker create-container command and the --privileged option to docker run  This parameter is not supported for Windows containers or tasks run on Fargate. 
      */
     privileged?: BoxedBoolean;
     /**
-     * When this parameter is true, the container is given read-only access to its root file system. This parameter maps to ReadonlyRootfs in the Create a container section of the Docker Remote API and the --read-only option to docker run.  This parameter is not supported for Windows containers. 
+     * When this parameter is true, the container is given read-only access to its root file system. This parameter maps to ReadonlyRootfs in the docker create-container command and the --read-only option to docker run.  This parameter is not supported for Windows containers. 
      */
     readonlyRootFilesystem?: BoxedBoolean;
     /**
-     * A list of DNS servers that are presented to the container. This parameter maps to Dns in the Create a container section of the Docker Remote API and the --dns option to docker run.  This parameter is not supported for Windows containers. 
+     * A list of DNS servers that are presented to the container. This parameter maps to Dns in the the docker create-container command and the --dns option to docker run.  This parameter is not supported for Windows containers. 
      */
     dnsServers?: StringList;
     /**
-     * A list of DNS search domains that are presented to the container. This parameter maps to DnsSearch in the Create a container section of the Docker Remote API and the --dns-search option to docker run.  This parameter is not supported for Windows containers. 
+     * A list of DNS search domains that are presented to the container. This parameter maps to DnsSearch in the docker create-container command and the --dns-search option to docker run.  This parameter is not supported for Windows containers. 
      */
     dnsSearchDomains?: StringList;
     /**
-     * A list of hostnames and IP address mappings to append to the /etc/hosts file on the container. This parameter maps to ExtraHosts in the Create a container section of the Docker Remote API and the --add-host option to docker run.  This parameter isn't supported for Windows containers or tasks that use the awsvpc network mode. 
+     * A list of hostnames and IP address mappings to append to the /etc/hosts file on the container. This parameter maps to ExtraHosts in the docker create-container command and the --add-host option to docker run.  This parameter isn't supported for Windows containers or tasks that use the awsvpc network mode. 
      */
     extraHosts?: HostEntryList;
     /**
-     * A list of strings to provide custom configuration for multiple security systems. For more information about valid values, see Docker Run Security Configuration. This field isn't valid for containers in tasks using the Fargate launch type. For Linux tasks on EC2, this parameter can be used to reference custom labels for SELinux and AppArmor multi-level security systems. For any tasks on EC2, this parameter can be used to reference a credential spec file that configures a container for Active Directory authentication. For more information, see Using gMSAs for Windows Containers and Using gMSAs for Linux Containers in the Amazon Elastic Container Service Developer Guide. This parameter maps to SecurityOpt in the Create a container section of the Docker Remote API and the --security-opt option to docker run.  The Amazon ECS container agent running on a container instance must register with the ECS_SELINUX_CAPABLE=true or ECS_APPARMOR_CAPABLE=true environment variables before containers placed on that instance can use these security options. For more information, see Amazon ECS Container Agent Configuration in the Amazon Elastic Container Service Developer Guide.  For more information about valid values, see Docker Run Security Configuration.  Valid values: "no-new-privileges" | "apparmor:PROFILE" | "label:value" | "credentialspec:CredentialSpecFilePath"
+     * A list of strings to provide custom configuration for multiple security systems. This field isn't valid for containers in tasks using the Fargate launch type. For Linux tasks on EC2, this parameter can be used to reference custom labels for SELinux and AppArmor multi-level security systems. For any tasks on EC2, this parameter can be used to reference a credential spec file that configures a container for Active Directory authentication. For more information, see Using gMSAs for Windows Containers and Using gMSAs for Linux Containers in the Amazon Elastic Container Service Developer Guide. This parameter maps to SecurityOpt in the docker create-container command and the --security-opt option to docker run.  The Amazon ECS container agent running on a container instance must register with the ECS_SELINUX_CAPABLE=true or ECS_APPARMOR_CAPABLE=true environment variables before containers placed on that instance can use these security options. For more information, see Amazon ECS Container Agent Configuration in the Amazon Elastic Container Service Developer Guide.  Valid values: "no-new-privileges" | "apparmor:PROFILE" | "label:value" | "credentialspec:CredentialSpecFilePath"
      */
     dockerSecurityOptions?: StringList;
     /**
-     * When this parameter is true, you can deploy containerized applications that require stdin or a tty to be allocated. This parameter maps to OpenStdin in the Create a container section of the Docker Remote API and the --interactive option to docker run.
+     * When this parameter is true, you can deploy containerized applications that require stdin or a tty to be allocated. This parameter maps to OpenStdin in the docker create-container command and the --interactive option to docker run.
      */
     interactive?: BoxedBoolean;
     /**
-     * When this parameter is true, a TTY is allocated. This parameter maps to Tty in the Create a container section of the Docker Remote API and the --tty option to docker run.
+     * When this parameter is true, a TTY is allocated. This parameter maps to Tty in tthe docker create-container command and the --tty option to docker run.
      */
     pseudoTerminal?: BoxedBoolean;
     /**
-     * A key/value map of labels to add to the container. This parameter maps to Labels in the Create a container section of the Docker Remote API and the --label option to docker run. This parameter requires version 1.18 of the Docker Remote API or greater on your container instance. To check the Docker Remote API version on your container instance, log in to your container instance and run the following command: sudo docker version --format '{{.Server.APIVersion}}' 
+     * A key/value map of labels to add to the container. This parameter maps to Labels in the docker create-container command and the --label option to docker run. This parameter requires version 1.18 of the Docker Remote API or greater on your container instance. To check the Docker Remote API version on your container instance, log in to your container instance and run the following command: sudo docker version --format '{{.Server.APIVersion}}' 
      */
     dockerLabels?: DockerLabelsMap;
     /**
-     * A list of ulimits to set in the container. If a ulimit value is specified in a task definition, it overrides the default values set by Docker. This parameter maps to Ulimits in the Create a container section of the Docker Remote API and the --ulimit option to docker run. Valid naming values are displayed in the Ulimit data type. Amazon ECS tasks hosted on Fargate use the default resource limit values set by the operating system with the exception of the nofile resource limit parameter which Fargate overrides. The nofile resource limit sets a restriction on the number of open files that a container can use. The default nofile soft limit is 1024 and the default hard limit is 65535. This parameter requires version 1.18 of the Docker Remote API or greater on your container instance. To check the Docker Remote API version on your container instance, log in to your container instance and run the following command: sudo docker version --format '{{.Server.APIVersion}}'   This parameter is not supported for Windows containers. 
+     * A list of ulimits to set in the container. If a ulimit value is specified in a task definition, it overrides the default values set by Docker. This parameter maps to Ulimits in tthe docker create-container command and the --ulimit option to docker run. Valid naming values are displayed in the Ulimit data type. Amazon ECS tasks hosted on Fargate use the default resource limit values set by the operating system with the exception of the nofile resource limit parameter which Fargate overrides. The nofile resource limit sets a restriction on the number of open files that a container can use. The default nofile soft limit is  65535 and the default hard limit is 65535. This parameter requires version 1.18 of the Docker Remote API or greater on your container instance. To check the Docker Remote API version on your container instance, log in to your container instance and run the following command: sudo docker version --format '{{.Server.APIVersion}}'   This parameter is not supported for Windows containers. 
      */
     ulimits?: UlimitList;
     /**
-     * The log configuration specification for the container. This parameter maps to LogConfig in the Create a container section of the Docker Remote API and the --log-driver option to docker run. By default, containers use the same logging driver that the Docker daemon uses. However the container can use a different logging driver than the Docker daemon by specifying a log driver with this parameter in the container definition. To use a different logging driver for a container, the log system must be configured properly on the container instance (or on a different log server for remote logging options). For more information about the options for different supported log drivers, see Configure logging drivers in the Docker documentation.  Amazon ECS currently supports a subset of the logging drivers available to the Docker daemon (shown in the LogConfiguration data type). Additional log drivers may be available in future releases of the Amazon ECS container agent.  This parameter requires version 1.18 of the Docker Remote API or greater on your container instance. To check the Docker Remote API version on your container instance, log in to your container instance and run the following command: sudo docker version --format '{{.Server.APIVersion}}'   The Amazon ECS container agent running on a container instance must register the logging drivers available on that instance with the ECS_AVAILABLE_LOGGING_DRIVERS environment variable before containers placed on that instance can use these log configuration options. For more information, see Amazon ECS Container Agent Configuration in the Amazon Elastic Container Service Developer Guide. 
+     * The log configuration specification for the container. This parameter maps to LogConfig in the docker create-container command and the --log-driver option to docker run. By default, containers use the same logging driver that the Docker daemon uses. However the container can use a different logging driver than the Docker daemon by specifying a log driver with this parameter in the container definition. To use a different logging driver for a container, the log system must be configured properly on the container instance (or on a different log server for remote logging options).   Amazon ECS currently supports a subset of the logging drivers available to the Docker daemon (shown in the LogConfiguration data type). Additional log drivers may be available in future releases of the Amazon ECS container agent.  This parameter requires version 1.18 of the Docker Remote API or greater on your container instance. To check the Docker Remote API version on your container instance, log in to your container instance and run the following command: sudo docker version --format '{{.Server.APIVersion}}'   The Amazon ECS container agent running on a container instance must register the logging drivers available on that instance with the ECS_AVAILABLE_LOGGING_DRIVERS environment variable before containers placed on that instance can use these log configuration options. For more information, see Amazon ECS Container Agent Configuration in the Amazon Elastic Container Service Developer Guide. 
      */
     logConfiguration?: LogConfiguration;
     /**
-     * The container health check command and associated configuration parameters for the container. This parameter maps to HealthCheck in the Create a container section of the Docker Remote API and the HEALTHCHECK parameter of docker run.
+     * The container health check command and associated configuration parameters for the container. This parameter maps to HealthCheck in the docker create-container command and the HEALTHCHECK parameter of docker run.
      */
     healthCheck?: HealthCheck;
     /**
-     * A list of namespaced kernel parameters to set in the container. This parameter maps to Sysctls in the Create a container section of the Docker Remote API and the --sysctl option to docker run. For example, you can configure net.ipv4.tcp_keepalive_time setting to maintain longer lived connections.
+     * A list of namespaced kernel parameters to set in the container. This parameter maps to Sysctls in tthe docker create-container command and the --sysctl option to docker run. For example, you can configure net.ipv4.tcp_keepalive_time setting to maintain longer lived connections.
      */
     systemControls?: SystemControls;
     /**
@@ -1123,6 +1127,20 @@ declare namespace ECS {
     resourceRequirements?: ResourceRequirements;
   }
   export type ContainerOverrides = ContainerOverride[];
+  export interface ContainerRestartPolicy {
+    /**
+     * Specifies whether a restart policy is enabled for the container.
+     */
+    enabled: BoxedBoolean;
+    /**
+     * A list of exit codes that Amazon ECS will ignore and not attempt a restart on. You can specify a maximum of 50 container exit codes. By default, Amazon ECS does not ignore any exit codes.
+     */
+    ignoredExitCodes?: IntegerList;
+    /**
+     * A period of time (in seconds) that the container must run for before a restart can be attempted. A container can be restarted only once every restartAttemptPeriod seconds. If a container isn't able to run for this time period and exits early, it will not be restarted. You can set a minimum restartAttemptPeriod of 60 seconds and a maximum restartAttemptPeriod of 1800 seconds. By default, a container must run for 300 seconds before it can be restarted.
+     */
+    restartAttemptPeriod?: BoxedInteger;
+  }
   export interface ContainerStateChange {
     /**
      * The name of the container.
@@ -1887,15 +1905,15 @@ declare namespace ECS {
      */
     autoprovision?: BoxedBoolean;
     /**
-     * The Docker volume driver to use. The driver value must match the driver name provided by Docker because it is used for task placement. If the driver was installed using the Docker plugin CLI, use docker plugin ls to retrieve the driver name from your container instance. If the driver was installed using another method, use Docker plugin discovery to retrieve the driver name. For more information, see Docker plugin discovery. This parameter maps to Driver in the Create a volume section of the Docker Remote API and the xxdriver option to docker volume create.
+     * The Docker volume driver to use. The driver value must match the driver name provided by Docker because it is used for task placement. If the driver was installed using the Docker plugin CLI, use docker plugin ls to retrieve the driver name from your container instance. If the driver was installed using another method, use Docker plugin discovery to retrieve the driver name. This parameter maps to Driver in the docker create-container command and the xxdriver option to docker volume create.
      */
     driver?: String;
     /**
-     * A map of Docker driver-specific options passed through. This parameter maps to DriverOpts in the Create a volume section of the Docker Remote API and the xxopt option to docker volume create.
+     * A map of Docker driver-specific options passed through. This parameter maps to DriverOpts in the docker create-volume command and the xxopt option to docker volume create.
      */
     driverOpts?: StringMap;
     /**
-     * Custom metadata to add to your Docker volume. This parameter maps to Labels in the Create a volume section of the Docker Remote API and the xxlabel option to docker volume create.
+     * Custom metadata to add to your Docker volume. This parameter maps to Labels in the docker create-container command and the xxlabel option to docker volume create.
      */
     labels?: StringMap;
   }
@@ -2133,7 +2151,7 @@ declare namespace ECS {
   export type GpuIds = String[];
   export interface HealthCheck {
     /**
-     * A string array representing the command that the container runs to determine if it is healthy. The string array must start with CMD to run the command arguments directly, or CMD-SHELL to run the command with the container's default shell.   When you use the Amazon Web Services Management Console JSON panel, the Command Line Interface, or the APIs, enclose the list of commands in double quotes and brackets.  [ "CMD-SHELL", "curl -f http://localhost/ || exit 1" ]  You don't include the double quotes and brackets when you use the Amazon Web Services Management Console.   CMD-SHELL, curl -f http://localhost/ || exit 1  An exit code of 0 indicates success, and non-zero exit code indicates failure. For more information, see HealthCheck in the Create a container section of the Docker Remote API.
+     * A string array representing the command that the container runs to determine if it is healthy. The string array must start with CMD to run the command arguments directly, or CMD-SHELL to run the command with the container's default shell.   When you use the Amazon Web Services Management Console JSON panel, the Command Line Interface, or the APIs, enclose the list of commands in double quotes and brackets.  [ "CMD-SHELL", "curl -f http://localhost/ || exit 1" ]  You don't include the double quotes and brackets when you use the Amazon Web Services Management Console.   CMD-SHELL, curl -f http://localhost/ || exit 1  An exit code of 0 indicates success, and non-zero exit code indicates failure. For more information, see HealthCheck in tthe docker create-container command
      */
     command: StringList;
     /**
@@ -2216,14 +2234,15 @@ declare namespace ECS {
   export type InstanceHealthCheckState = "OK"|"IMPAIRED"|"INSUFFICIENT_DATA"|"INITIALIZING"|string;
   export type InstanceHealthCheckType = "CONTAINER_RUNTIME"|string;
   export type Integer = number;
+  export type IntegerList = BoxedInteger[];
   export type IpcMode = "host"|"task"|"none"|string;
   export interface KernelCapabilities {
     /**
-     * The Linux capabilities for the container that have been added to the default configuration provided by Docker. This parameter maps to CapAdd in the Create a container section of the Docker Remote API and the --cap-add option to docker run.  Tasks launched on Fargate only support adding the SYS_PTRACE kernel capability.  Valid values: "ALL" | "AUDIT_CONTROL" | "AUDIT_WRITE" | "BLOCK_SUSPEND" | "CHOWN" | "DAC_OVERRIDE" | "DAC_READ_SEARCH" | "FOWNER" | "FSETID" | "IPC_LOCK" | "IPC_OWNER" | "KILL" | "LEASE" | "LINUX_IMMUTABLE" | "MAC_ADMIN" | "MAC_OVERRIDE" | "MKNOD" | "NET_ADMIN" | "NET_BIND_SERVICE" | "NET_BROADCAST" | "NET_RAW" | "SETFCAP" | "SETGID" | "SETPCAP" | "SETUID" | "SYS_ADMIN" | "SYS_BOOT" | "SYS_CHROOT" | "SYS_MODULE" | "SYS_NICE" | "SYS_PACCT" | "SYS_PTRACE" | "SYS_RAWIO" | "SYS_RESOURCE" | "SYS_TIME" | "SYS_TTY_CONFIG" | "SYSLOG" | "WAKE_ALARM" 
+     * The Linux capabilities for the container that have been added to the default configuration provided by Docker. This parameter maps to CapAdd in the docker create-container command and the --cap-add option to docker run.  Tasks launched on Fargate only support adding the SYS_PTRACE kernel capability.  Valid values: "ALL" | "AUDIT_CONTROL" | "AUDIT_WRITE" | "BLOCK_SUSPEND" | "CHOWN" | "DAC_OVERRIDE" | "DAC_READ_SEARCH" | "FOWNER" | "FSETID" | "IPC_LOCK" | "IPC_OWNER" | "KILL" | "LEASE" | "LINUX_IMMUTABLE" | "MAC_ADMIN" | "MAC_OVERRIDE" | "MKNOD" | "NET_ADMIN" | "NET_BIND_SERVICE" | "NET_BROADCAST" | "NET_RAW" | "SETFCAP" | "SETGID" | "SETPCAP" | "SETUID" | "SYS_ADMIN" | "SYS_BOOT" | "SYS_CHROOT" | "SYS_MODULE" | "SYS_NICE" | "SYS_PACCT" | "SYS_PTRACE" | "SYS_RAWIO" | "SYS_RESOURCE" | "SYS_TIME" | "SYS_TTY_CONFIG" | "SYSLOG" | "WAKE_ALARM" 
      */
     add?: StringList;
     /**
-     * The Linux capabilities for the container that have been removed from the default configuration provided by Docker. This parameter maps to CapDrop in the Create a container section of the Docker Remote API and the --cap-drop option to docker run. Valid values: "ALL" | "AUDIT_CONTROL" | "AUDIT_WRITE" | "BLOCK_SUSPEND" | "CHOWN" | "DAC_OVERRIDE" | "DAC_READ_SEARCH" | "FOWNER" | "FSETID" | "IPC_LOCK" | "IPC_OWNER" | "KILL" | "LEASE" | "LINUX_IMMUTABLE" | "MAC_ADMIN" | "MAC_OVERRIDE" | "MKNOD" | "NET_ADMIN" | "NET_BIND_SERVICE" | "NET_BROADCAST" | "NET_RAW" | "SETFCAP" | "SETGID" | "SETPCAP" | "SETUID" | "SYS_ADMIN" | "SYS_BOOT" | "SYS_CHROOT" | "SYS_MODULE" | "SYS_NICE" | "SYS_PACCT" | "SYS_PTRACE" | "SYS_RAWIO" | "SYS_RESOURCE" | "SYS_TIME" | "SYS_TTY_CONFIG" | "SYSLOG" | "WAKE_ALARM" 
+     * The Linux capabilities for the container that have been removed from the default configuration provided by Docker. This parameter maps to CapDrop in the docker create-container command and the --cap-drop option to docker run. Valid values: "ALL" | "AUDIT_CONTROL" | "AUDIT_WRITE" | "BLOCK_SUSPEND" | "CHOWN" | "DAC_OVERRIDE" | "DAC_READ_SEARCH" | "FOWNER" | "FSETID" | "IPC_LOCK" | "IPC_OWNER" | "KILL" | "LEASE" | "LINUX_IMMUTABLE" | "MAC_ADMIN" | "MAC_OVERRIDE" | "MKNOD" | "NET_ADMIN" | "NET_BIND_SERVICE" | "NET_BROADCAST" | "NET_RAW" | "SETFCAP" | "SETGID" | "SETPCAP" | "SETUID" | "SYS_ADMIN" | "SYS_BOOT" | "SYS_CHROOT" | "SYS_MODULE" | "SYS_NICE" | "SYS_PACCT" | "SYS_PTRACE" | "SYS_RAWIO" | "SYS_RESOURCE" | "SYS_TIME" | "SYS_TTY_CONFIG" | "SYSLOG" | "WAKE_ALARM" 
      */
     drop?: StringList;
   }
@@ -2244,7 +2263,7 @@ declare namespace ECS {
      */
     capabilities?: KernelCapabilities;
     /**
-     * Any host devices to expose to the container. This parameter maps to Devices in the Create a container section of the Docker Remote API and the --device option to docker run.  If you're using tasks that use the Fargate launch type, the devices parameter isn't supported. 
+     * Any host devices to expose to the container. This parameter maps to Devices in tthe docker create-container command and the --device option to docker run.  If you're using tasks that use the Fargate launch type, the devices parameter isn't supported. 
      */
     devices?: DevicesList;
     /**
@@ -2589,7 +2608,7 @@ declare namespace ECS {
   export type LoadBalancers = LoadBalancer[];
   export interface LogConfiguration {
     /**
-     * The log driver to use for the container. For tasks on Fargate, the supported log drivers are awslogs, splunk, and awsfirelens. For tasks hosted on Amazon EC2 instances, the supported log drivers are awslogs, fluentd, gelf, json-file, journald, logentries,syslog, splunk, and awsfirelens. For more information about using the awslogs log driver, see Using the awslogs log driver in the Amazon Elastic Container Service Developer Guide. For more information about using the awsfirelens log driver, see Custom log routing in the Amazon Elastic Container Service Developer Guide.  If you have a custom driver that isn't listed, you can fork the Amazon ECS container agent project that's available on GitHub and customize it to work with that driver. We encourage you to submit pull requests for changes that you would like to have included. However, we don't currently provide support for running modified copies of this software. 
+     * The log driver to use for the container. For tasks on Fargate, the supported log drivers are awslogs, splunk, and awsfirelens. For tasks hosted on Amazon EC2 instances, the supported log drivers are awslogs, fluentd, gelf, json-file, journald, syslog, splunk, and awsfirelens. For more information about using the awslogs log driver, see Send Amazon ECS logs to CloudWatch in the Amazon Elastic Container Service Developer Guide. For more information about using the awsfirelens log driver, see Send Amazon ECS logs to an Amazon Web Services service or Amazon Web Services Partner.  If you have a custom driver that isn't listed, you can fork the Amazon ECS container agent project that's available on GitHub and customize it to work with that driver. We encourage you to submit pull requests for changes that you would like to have included. However, we don't currently provide support for running modified copies of this software. 
      */
     logDriver: LogDriver;
     /**
@@ -2969,11 +2988,11 @@ declare namespace ECS {
      */
     taskRoleArn?: String;
     /**
-     * The Amazon Resource Name (ARN) of the task execution role that grants the Amazon ECS container agent permission to make Amazon Web Services API calls on your behalf. The task execution IAM role is required depending on the requirements of your task. For more information, see Amazon ECS task execution IAM role in the Amazon Elastic Container Service Developer Guide.
+     * The Amazon Resource Name (ARN) of the task execution role that grants the Amazon ECS container agent permission to make Amazon Web Services API calls on your behalf. For informationabout the required IAM roles for Amazon ECS, see IAM roles for Amazon ECS in the Amazon Elastic Container Service Developer Guide.
      */
     executionRoleArn?: String;
     /**
-     * The Docker networking mode to use for the containers in the task. The valid values are none, bridge, awsvpc, and host. If no network mode is specified, the default is bridge. For Amazon ECS tasks on Fargate, the awsvpc network mode is required. For Amazon ECS tasks on Amazon EC2 Linux instances, any network mode can be used. For Amazon ECS tasks on Amazon EC2 Windows instances, &lt;default&gt; or awsvpc can be used. If the network mode is set to none, you cannot specify port mappings in your container definitions, and the tasks containers do not have external connectivity. The host and awsvpc network modes offer the highest networking performance for containers because they use the EC2 network stack instead of the virtualized network stack provided by the bridge mode. With the host and awsvpc network modes, exposed container ports are mapped directly to the corresponding host port (for the host network mode) or the attached elastic network interface port (for the awsvpc network mode), so you cannot take advantage of dynamic host port mappings.   When using the host network mode, you should not run containers using the root user (UID 0). It is considered best practice to use a non-root user.  If the network mode is awsvpc, the task is allocated an elastic network interface, and you must specify a NetworkConfiguration value when you create a service or run a task with the task definition. For more information, see Task Networking in the Amazon Elastic Container Service Developer Guide. If the network mode is host, you cannot run multiple instantiations of the same task on a single container instance when port mappings are used. For more information, see Network settings in the Docker run reference.
+     * The Docker networking mode to use for the containers in the task. The valid values are none, bridge, awsvpc, and host. If no network mode is specified, the default is bridge. For Amazon ECS tasks on Fargate, the awsvpc network mode is required. For Amazon ECS tasks on Amazon EC2 Linux instances, any network mode can be used. For Amazon ECS tasks on Amazon EC2 Windows instances, &lt;default&gt; or awsvpc can be used. If the network mode is set to none, you cannot specify port mappings in your container definitions, and the tasks containers do not have external connectivity. The host and awsvpc network modes offer the highest networking performance for containers because they use the EC2 network stack instead of the virtualized network stack provided by the bridge mode. With the host and awsvpc network modes, exposed container ports are mapped directly to the corresponding host port (for the host network mode) or the attached elastic network interface port (for the awsvpc network mode), so you cannot take advantage of dynamic host port mappings.   When using the host network mode, you should not run containers using the root user (UID 0). It is considered best practice to use a non-root user.  If the network mode is awsvpc, the task is allocated an elastic network interface, and you must specify a NetworkConfiguration value when you create a service or run a task with the task definition. For more information, see Task Networking in the Amazon Elastic Container Service Developer Guide. If the network mode is host, you cannot run multiple instantiations of the same task on a single container instance when port mappings are used.
      */
     networkMode?: NetworkMode;
     /**
@@ -3005,11 +3024,11 @@ declare namespace ECS {
      */
     tags?: Tags;
     /**
-     * The process namespace to use for the containers in the task. The valid values are host or task. On Fargate for Linux containers, the only valid value is task. For example, monitoring sidecars might need pidMode to access information about other containers running in the same task. If host is specified, all containers within the tasks that specified the host PID mode on the same container instance share the same process namespace with the host Amazon EC2 instance. If task is specified, all containers within the specified task share the same process namespace. If no value is specified, the default is a private namespace for each container. For more information, see PID settings in the Docker run reference. If the host PID mode is used, there's a heightened risk of undesired process namespace exposure. For more information, see Docker security.  This parameter is not supported for Windows containers.   This parameter is only supported for tasks that are hosted on Fargate if the tasks are using platform version 1.4.0 or later (Linux). This isn't supported for Windows containers on Fargate. 
+     * The process namespace to use for the containers in the task. The valid values are host or task. On Fargate for Linux containers, the only valid value is task. For example, monitoring sidecars might need pidMode to access information about other containers running in the same task. If host is specified, all containers within the tasks that specified the host PID mode on the same container instance share the same process namespace with the host Amazon EC2 instance. If task is specified, all containers within the specified task share the same process namespace. If no value is specified, the default is a private namespace for each container. If the host PID mode is used, there's a heightened risk of undesired process namespace exposure.  This parameter is not supported for Windows containers.   This parameter is only supported for tasks that are hosted on Fargate if the tasks are using platform version 1.4.0 or later (Linux). This isn't supported for Windows containers on Fargate. 
      */
     pidMode?: PidMode;
     /**
-     * The IPC resource namespace to use for the containers in the task. The valid values are host, task, or none. If host is specified, then all containers within the tasks that specified the host IPC mode on the same container instance share the same IPC resources with the host Amazon EC2 instance. If task is specified, all containers within the specified task share the same IPC resources. If none is specified, then IPC resources within the containers of a task are private and not shared with other containers in a task or on the container instance. If no value is specified, then the IPC resource namespace sharing depends on the Docker daemon setting on the container instance. For more information, see IPC settings in the Docker run reference. If the host IPC mode is used, be aware that there is a heightened risk of undesired IPC namespace expose. For more information, see Docker security. If you are setting namespaced kernel parameters using systemControls for the containers in the task, the following will apply to your IPC resource namespace. For more information, see System Controls in the Amazon Elastic Container Service Developer Guide.   For tasks that use the host IPC mode, IPC namespace related systemControls are not supported.   For tasks that use the task IPC mode, IPC namespace related systemControls will apply to all containers within a task.    This parameter is not supported for Windows containers or tasks run on Fargate. 
+     * The IPC resource namespace to use for the containers in the task. The valid values are host, task, or none. If host is specified, then all containers within the tasks that specified the host IPC mode on the same container instance share the same IPC resources with the host Amazon EC2 instance. If task is specified, all containers within the specified task share the same IPC resources. If none is specified, then IPC resources within the containers of a task are private and not shared with other containers in a task or on the container instance. If no value is specified, then the IPC resource namespace sharing depends on the Docker daemon setting on the container instance. If the host IPC mode is used, be aware that there is a heightened risk of undesired IPC namespace expose. If you are setting namespaced kernel parameters using systemControls for the containers in the task, the following will apply to your IPC resource namespace. For more information, see System Controls in the Amazon Elastic Container Service Developer Guide.   For tasks that use the host IPC mode, IPC namespace related systemControls are not supported.   For tasks that use the task IPC mode, IPC namespace related systemControls will apply to all containers within a task.    This parameter is not supported for Windows containers or tasks run on Fargate. 
      */
     ipcMode?: IpcMode;
     /**
@@ -3143,7 +3162,7 @@ declare namespace ECS {
      */
     referenceId?: String;
     /**
-     * An optional tag specified when a task is started. For example, if you automatically trigger a task to run a batch process job, you could apply a unique identifier for that job to your task with the startedBy parameter. You can then identify which tasks belong to that job by filtering the results of a ListTasks call with the startedBy value. Up to 128 letters (uppercase and lowercase), numbers, hyphens (-), and underscores (_) are allowed. If a task is started by an Amazon ECS service, then the startedBy parameter contains the deployment ID of the service that starts it.
+     * An optional tag specified when a task is started. For example, if you automatically trigger a task to run a batch process job, you could apply a unique identifier for that job to your task with the startedBy parameter. You can then identify which tasks belong to that job by filtering the results of a ListTasks call with the startedBy value. Up to 128 letters (uppercase and lowercase), numbers, hyphens (-), forward slash (/), and underscores (_) are allowed. If a task is started by an Amazon ECS service, then the startedBy parameter contains the deployment ID of the service that starts it.
      */
     startedBy?: String;
     /**
@@ -3165,7 +3184,7 @@ declare namespace ECS {
   }
   export interface RunTaskResponse {
     /**
-     * A full description of the tasks that were run. The tasks that were successfully placed on your cluster are described here. 
+     * A full description of the tasks that were run. The tasks that were successfully placed on your cluster are described here.
      */
     tasks?: Tasks;
     /**
@@ -3583,7 +3602,7 @@ declare namespace ECS {
      */
     referenceId?: String;
     /**
-     * An optional tag specified when a task is started. For example, if you automatically trigger a task to run a batch process job, you could apply a unique identifier for that job to your task with the startedBy parameter. You can then identify which tasks belong to that job by filtering the results of a ListTasks call with the startedBy value. Up to 36 letters (uppercase and lowercase), numbers, hyphens (-), and underscores (_) are allowed. If a task is started by an Amazon ECS service, the startedBy parameter contains the deployment ID of the service that starts it.
+     * An optional tag specified when a task is started. For example, if you automatically trigger a task to run a batch process job, you could apply a unique identifier for that job to your task with the startedBy parameter. You can then identify which tasks belong to that job by filtering the results of a ListTasks call with the startedBy value. Up to 36 letters (uppercase and lowercase), numbers, hyphens (-), forward slash (/), and underscores (_) are allowed. If a task is started by an Amazon ECS service, the startedBy parameter contains the deployment ID of the service that starts it.
      */
     startedBy?: String;
     /**
@@ -3939,15 +3958,15 @@ declare namespace ECS {
      */
     family?: String;
     /**
-     * The short name or full Amazon Resource Name (ARN) of the Identity and Access Management role that grants containers in the task permission to call Amazon Web Services APIs on your behalf. For more information, see Amazon ECS Task Role in the Amazon Elastic Container Service Developer Guide. IAM roles for tasks on Windows require that the -EnableTaskIAMRole option is set when you launch the Amazon ECS-optimized Windows AMI. Your containers must also run some configuration code to use the feature. For more information, see Windows IAM roles for tasks in the Amazon Elastic Container Service Developer Guide.
+     * The short name or full Amazon Resource Name (ARN) of the Identity and Access Management role that grants containers in the task permission to call Amazon Web Services APIs on your behalf. For informationabout the required IAM roles for Amazon ECS, see IAM roles for Amazon ECS in the Amazon Elastic Container Service Developer Guide.
      */
     taskRoleArn?: String;
     /**
-     * The Amazon Resource Name (ARN) of the task execution role that grants the Amazon ECS container agent permission to make Amazon Web Services API calls on your behalf. The task execution IAM role is required depending on the requirements of your task. For more information, see Amazon ECS task execution IAM role in the Amazon Elastic Container Service Developer Guide.
+     * The Amazon Resource Name (ARN) of the task execution role that grants the Amazon ECS container agent permission to make Amazon Web Services API calls on your behalf. For informationabout the required IAM roles for Amazon ECS, see IAM roles for Amazon ECS in the Amazon Elastic Container Service Developer Guide.
      */
     executionRoleArn?: String;
     /**
-     * The Docker networking mode to use for the containers in the task. The valid values are none, bridge, awsvpc, and host. If no network mode is specified, the default is bridge. For Amazon ECS tasks on Fargate, the awsvpc network mode is required. For Amazon ECS tasks on Amazon EC2 Linux instances, any network mode can be used. For Amazon ECS tasks on Amazon EC2 Windows instances, &lt;default&gt; or awsvpc can be used. If the network mode is set to none, you cannot specify port mappings in your container definitions, and the tasks containers do not have external connectivity. The host and awsvpc network modes offer the highest networking performance for containers because they use the EC2 network stack instead of the virtualized network stack provided by the bridge mode. With the host and awsvpc network modes, exposed container ports are mapped directly to the corresponding host port (for the host network mode) or the attached elastic network interface port (for the awsvpc network mode), so you cannot take advantage of dynamic host port mappings.   When using the host network mode, you should not run containers using the root user (UID 0). It is considered best practice to use a non-root user.  If the network mode is awsvpc, the task is allocated an elastic network interface, and you must specify a NetworkConfiguration value when you create a service or run a task with the task definition. For more information, see Task Networking in the Amazon Elastic Container Service Developer Guide. If the network mode is host, you cannot run multiple instantiations of the same task on a single container instance when port mappings are used. For more information, see Network settings in the Docker run reference.
+     * The Docker networking mode to use for the containers in the task. The valid values are none, bridge, awsvpc, and host. If no network mode is specified, the default is bridge. For Amazon ECS tasks on Fargate, the awsvpc network mode is required. For Amazon ECS tasks on Amazon EC2 Linux instances, any network mode can be used. For Amazon ECS tasks on Amazon EC2 Windows instances, &lt;default&gt; or awsvpc can be used. If the network mode is set to none, you cannot specify port mappings in your container definitions, and the tasks containers do not have external connectivity. The host and awsvpc network modes offer the highest networking performance for containers because they use the EC2 network stack instead of the virtualized network stack provided by the bridge mode. With the host and awsvpc network modes, exposed container ports are mapped directly to the corresponding host port (for the host network mode) or the attached elastic network interface port (for the awsvpc network mode), so you cannot take advantage of dynamic host port mappings.   When using the host network mode, you should not run containers using the root user (UID 0). It is considered best practice to use a non-root user.  If the network mode is awsvpc, the task is allocated an elastic network interface, and you must specify a NetworkConfiguration value when you create a service or run a task with the task definition. For more information, see Task Networking in the Amazon Elastic Container Service Developer Guide. If the network mode is host, you cannot run multiple instantiations of the same task on a single container instance when port mappings are used.
      */
     networkMode?: NetworkMode;
     /**
@@ -3983,7 +4002,7 @@ declare namespace ECS {
      */
     requiresCompatibilities?: CompatibilityList;
     /**
-     * The number of cpu units used by the task. If you use the EC2 launch type, this field is optional. Any value can be used. If you use the Fargate launch type, this field is required. You must use one of the following values. The value that you choose determines your range of valid values for the memory parameter. The CPU units cannot be less than 1 vCPU when you use Windows containers on Fargate.   256 (.25 vCPU) - Available memory values: 512 (0.5 GB), 1024 (1 GB), 2048 (2 GB)   512 (.5 vCPU) - Available memory values: 1024 (1 GB), 2048 (2 GB), 3072 (3 GB), 4096 (4 GB)   1024 (1 vCPU) - Available memory values: 2048 (2 GB), 3072 (3 GB), 4096 (4 GB), 5120 (5 GB), 6144 (6 GB), 7168 (7 GB), 8192 (8 GB)   2048 (2 vCPU) - Available memory values: 4096 (4 GB) and 16384 (16 GB) in increments of 1024 (1 GB)   4096 (4 vCPU) - Available memory values: 8192 (8 GB) and 30720 (30 GB) in increments of 1024 (1 GB)   8192 (8 vCPU) - Available memory values: 16 GB and 60 GB in 4 GB increments This option requires Linux platform 1.4.0 or later.   16384 (16vCPU) - Available memory values: 32GB and 120 GB in 8 GB increments This option requires Linux platform 1.4.0 or later.  
+     * The number of cpu units used by the task. If you use the EC2 launch type, this field is optional. Any value can be used. If you use the Fargate launch type, this field is required. You must use one of the following values. The value that you choose determines your range of valid values for the memory parameter. If you use the EC2 launch type, this field is optional. Supported values are between 128 CPU units (0.125 vCPUs) and 10240 CPU units (10 vCPUs). The CPU units cannot be less than 1 vCPU when you use Windows containers on Fargate.   256 (.25 vCPU) - Available memory values: 512 (0.5 GB), 1024 (1 GB), 2048 (2 GB)   512 (.5 vCPU) - Available memory values: 1024 (1 GB), 2048 (2 GB), 3072 (3 GB), 4096 (4 GB)   1024 (1 vCPU) - Available memory values: 2048 (2 GB), 3072 (3 GB), 4096 (4 GB), 5120 (5 GB), 6144 (6 GB), 7168 (7 GB), 8192 (8 GB)   2048 (2 vCPU) - Available memory values: 4096 (4 GB) and 16384 (16 GB) in increments of 1024 (1 GB)   4096 (4 vCPU) - Available memory values: 8192 (8 GB) and 30720 (30 GB) in increments of 1024 (1 GB)   8192 (8 vCPU) - Available memory values: 16 GB and 60 GB in 4 GB increments This option requires Linux platform 1.4.0 or later.   16384 (16vCPU) - Available memory values: 32GB and 120 GB in 8 GB increments This option requires Linux platform 1.4.0 or later.  
      */
     cpu?: String;
     /**
@@ -3995,11 +4014,11 @@ declare namespace ECS {
      */
     inferenceAccelerators?: InferenceAccelerators;
     /**
-     * The process namespace to use for the containers in the task. The valid values are host or task. On Fargate for Linux containers, the only valid value is task. For example, monitoring sidecars might need pidMode to access information about other containers running in the same task. If host is specified, all containers within the tasks that specified the host PID mode on the same container instance share the same process namespace with the host Amazon EC2 instance. If task is specified, all containers within the specified task share the same process namespace. If no value is specified, the default is a private namespace for each container. For more information, see PID settings in the Docker run reference. If the host PID mode is used, there's a heightened risk of undesired process namespace exposure. For more information, see Docker security.  This parameter is not supported for Windows containers.   This parameter is only supported for tasks that are hosted on Fargate if the tasks are using platform version 1.4.0 or later (Linux). This isn't supported for Windows containers on Fargate. 
+     * The process namespace to use for the containers in the task. The valid values are host or task. On Fargate for Linux containers, the only valid value is task. For example, monitoring sidecars might need pidMode to access information about other containers running in the same task. If host is specified, all containers within the tasks that specified the host PID mode on the same container instance share the same process namespace with the host Amazon EC2 instance. If task is specified, all containers within the specified task share the same process namespace. If no value is specified, the default is a private namespace for each container. If the host PID mode is used, there's a heightened risk of undesired process namespace exposure.  This parameter is not supported for Windows containers.   This parameter is only supported for tasks that are hosted on Fargate if the tasks are using platform version 1.4.0 or later (Linux). This isn't supported for Windows containers on Fargate. 
      */
     pidMode?: PidMode;
     /**
-     * The IPC resource namespace to use for the containers in the task. The valid values are host, task, or none. If host is specified, then all containers within the tasks that specified the host IPC mode on the same container instance share the same IPC resources with the host Amazon EC2 instance. If task is specified, all containers within the specified task share the same IPC resources. If none is specified, then IPC resources within the containers of a task are private and not shared with other containers in a task or on the container instance. If no value is specified, then the IPC resource namespace sharing depends on the Docker daemon setting on the container instance. For more information, see IPC settings in the Docker run reference. If the host IPC mode is used, be aware that there is a heightened risk of undesired IPC namespace expose. For more information, see Docker security. If you are setting namespaced kernel parameters using systemControls for the containers in the task, the following will apply to your IPC resource namespace. For more information, see System Controls in the Amazon Elastic Container Service Developer Guide.   For tasks that use the host IPC mode, IPC namespace related systemControls are not supported.   For tasks that use the task IPC mode, IPC namespace related systemControls will apply to all containers within a task.    This parameter is not supported for Windows containers or tasks run on Fargate. 
+     * The IPC resource namespace to use for the containers in the task. The valid values are host, task, or none. If host is specified, then all containers within the tasks that specified the host IPC mode on the same container instance share the same IPC resources with the host Amazon EC2 instance. If task is specified, all containers within the specified task share the same IPC resources. If none is specified, then IPC resources within the containers of a task are private and not shared with other containers in a task or on the container instance. If no value is specified, then the IPC resource namespace sharing depends on the Docker daemon setting on the container instance. If the host IPC mode is used, be aware that there is a heightened risk of undesired IPC namespace expose. If you are setting namespaced kernel parameters using systemControls for the containers in the task, the following will apply to your IPC resource namespace. For more information, see System Controls in the Amazon Elastic Container Service Developer Guide.   For tasks that use the host IPC mode, IPC namespace related systemControls are not supported.   For tasks that use the task IPC mode, IPC namespace related systemControls will apply to all containers within a task.    This parameter is not supported for Windows containers or tasks run on Fargate. 
      */
     ipcMode?: IpcMode;
     /**

package/node_modules/aws-sdk/clients/fis.d.ts

@@ -596,6 +596,23 @@ declare namespace Fis {
     logGroupArn?: CloudWatchLogGroupArn;
   }
   export type ExperimentEndTime = Date;
+  export interface ExperimentError {
+    /**
+     * The Amazon Web Services Account ID where the experiment failure occurred.
+     */
+    accountId?: ExperimentErrorAccountId;
+    /**
+     * The error code for the failed experiment.
+     */
+    code?: ExperimentErrorCode;
+    /**
+     * Context for the section of the experiment template that failed.
+     */
+    location?: ExperimentErrorLocation;
+  }
+  export type ExperimentErrorAccountId = string;
+  export type ExperimentErrorCode = string;
+  export type ExperimentErrorLocation = string;
   export type ExperimentId = string;
   export interface ExperimentLogConfiguration {
     /**
@@ -645,6 +662,10 @@ declare namespace Fis {
      * The reason for the state.
      */
     reason?: ExperimentStatusReason;
+    /**
+     * The error information of the experiment when the action has failed.
+     */
+    error?: ExperimentError;
   }
   export type ExperimentStatus = "pending"|"initiating"|"running"|"completed"|"stopping"|"stopped"|"failed"|string;
   export type ExperimentStatusReason = string;

package/node_modules/aws-sdk/clients/glue.d.ts

@@ -8485,6 +8485,10 @@ declare namespace Glue {
      * Specifies whether to include status details related to a request to create or update an Glue Data Catalog view.
      */
     IncludeStatusDetails?: BooleanNullable;
+    /**
+     *  Specifies the table fields returned by the GetTables call. This parameter doesn’t accept an empty list. The request must include NAME. The following are the valid combinations of values:    NAME - Names of all tables in the database.    NAME, TABLE_TYPE - Names of all tables and the table types.  
+     */
+    AttributesToGet?: TableAttributesList;
   }
   export interface GetTablesResponse {
     /**
@@ -13870,6 +13874,8 @@ declare namespace Glue {
     IsMultiDialectView?: NullableBoolean;
     Status?: TableStatus;
   }
+  export type TableAttributes = "NAME"|"TABLE_TYPE"|string;
+  export type TableAttributesList = TableAttributes[];
   export interface TableError {
     /**
      * The name of the table. For Hive compatibility, this must be entirely lowercase.