cdk-lambda-subminute 2.0.442 → 2.0.444

package/node_modules/aws-sdk/lib/config_service_placeholders.d.ts

@@ -126,7 +126,6 @@ export abstract class ConfigurationServicePlaceholders {
   sagemaker?: AWS.SageMaker.Types.ClientConfiguration;
   translate?: AWS.Translate.Types.ClientConfiguration;
   resourcegroups?: AWS.ResourceGroups.Types.ClientConfiguration;
-  alexaforbusiness?: AWS.AlexaForBusiness.Types.ClientConfiguration;
   cloud9?: AWS.Cloud9.Types.ClientConfiguration;
   serverlessapplicationrepository?: AWS.ServerlessApplicationRepository.Types.ClientConfiguration;
   servicediscovery?: AWS.ServiceDiscovery.Types.ClientConfiguration;
@@ -223,7 +222,6 @@ export abstract class ConfigurationServicePlaceholders {
   iotsitewise?: AWS.IoTSiteWise.Types.ClientConfiguration;
   macie2?: AWS.Macie2.Types.ClientConfiguration;
   codeartifact?: AWS.CodeArtifact.Types.ClientConfiguration;
-  honeycode?: AWS.Honeycode.Types.ClientConfiguration;
   ivs?: AWS.IVS.Types.ClientConfiguration;
   braket?: AWS.Braket.Types.ClientConfiguration;
   identitystore?: AWS.IdentityStore.Types.ClientConfiguration;
@@ -310,7 +308,6 @@ export abstract class ConfigurationServicePlaceholders {
   redshiftserverless?: AWS.RedshiftServerless.Types.ClientConfiguration;
   rolesanywhere?: AWS.RolesAnywhere.Types.ClientConfiguration;
   licensemanagerusersubscriptions?: AWS.LicenseManagerUserSubscriptions.Types.ClientConfiguration;
-  backupstorage?: AWS.BackupStorage.Types.ClientConfiguration;
   privatenetworks?: AWS.PrivateNetworks.Types.ClientConfiguration;
   supportapp?: AWS.SupportApp.Types.ClientConfiguration;
   controltower?: AWS.ControlTower.Types.ClientConfiguration;
@@ -382,6 +379,12 @@ export abstract class ConfigurationServicePlaceholders {
   deadline?: AWS.Deadline.Types.ClientConfiguration;
   controlcatalog?: AWS.ControlCatalog.Types.ClientConfiguration;
   route53profiles?: AWS.Route53Profiles.Types.ClientConfiguration;
+  mailmanager?: AWS.MailManager.Types.ClientConfiguration;
+  taxsettings?: AWS.TaxSettings.Types.ClientConfiguration;
+  applicationsignals?: AWS.ApplicationSignals.Types.ClientConfiguration;
+  pcaconnectorscep?: AWS.PcaConnectorScep.Types.ClientConfiguration;
+  apptest?: AWS.AppTest.Types.ClientConfiguration;
+  qapps?: AWS.QApps.Types.ClientConfiguration;
 }
 export interface ConfigurationServiceApiVersions {
   acm?: AWS.ACM.Types.apiVersion;
@@ -510,7 +513,6 @@ export interface ConfigurationServiceApiVersions {
   sagemaker?: AWS.SageMaker.Types.apiVersion;
   translate?: AWS.Translate.Types.apiVersion;
   resourcegroups?: AWS.ResourceGroups.Types.apiVersion;
-  alexaforbusiness?: AWS.AlexaForBusiness.Types.apiVersion;
   cloud9?: AWS.Cloud9.Types.apiVersion;
   serverlessapplicationrepository?: AWS.ServerlessApplicationRepository.Types.apiVersion;
   servicediscovery?: AWS.ServiceDiscovery.Types.apiVersion;
@@ -607,7 +609,6 @@ export interface ConfigurationServiceApiVersions {
   iotsitewise?: AWS.IoTSiteWise.Types.apiVersion;
   macie2?: AWS.Macie2.Types.apiVersion;
   codeartifact?: AWS.CodeArtifact.Types.apiVersion;
-  honeycode?: AWS.Honeycode.Types.apiVersion;
   ivs?: AWS.IVS.Types.apiVersion;
   braket?: AWS.Braket.Types.apiVersion;
   identitystore?: AWS.IdentityStore.Types.apiVersion;
@@ -694,7 +695,6 @@ export interface ConfigurationServiceApiVersions {
   redshiftserverless?: AWS.RedshiftServerless.Types.apiVersion;
   rolesanywhere?: AWS.RolesAnywhere.Types.apiVersion;
   licensemanagerusersubscriptions?: AWS.LicenseManagerUserSubscriptions.Types.apiVersion;
-  backupstorage?: AWS.BackupStorage.Types.apiVersion;
   privatenetworks?: AWS.PrivateNetworks.Types.apiVersion;
   supportapp?: AWS.SupportApp.Types.apiVersion;
   controltower?: AWS.ControlTower.Types.apiVersion;
@@ -766,4 +766,10 @@ export interface ConfigurationServiceApiVersions {
   deadline?: AWS.Deadline.Types.apiVersion;
   controlcatalog?: AWS.ControlCatalog.Types.apiVersion;
   route53profiles?: AWS.Route53Profiles.Types.apiVersion;
+  mailmanager?: AWS.MailManager.Types.apiVersion;
+  taxsettings?: AWS.TaxSettings.Types.apiVersion;
+  applicationsignals?: AWS.ApplicationSignals.Types.apiVersion;
+  pcaconnectorscep?: AWS.PcaConnectorScep.Types.apiVersion;
+  apptest?: AWS.AppTest.Types.apiVersion;
+  qapps?: AWS.QApps.Types.apiVersion;
 }

package/node_modules/aws-sdk/lib/core.js

@@ -20,7 +20,7 @@ AWS.util.update(AWS, {
   /**
    * @constant
    */
-  VERSION: '2.1608.0',
+  VERSION: '2.1659.0',
 
   /**
    * @api private

package/node_modules/aws-sdk/lib/credentials/cognito_identity_credentials.js

@@ -23,6 +23,15 @@ var STS = require('../../clients/sts');
  * identity providers. See {constructor} for an example on creating a credentials
  * object with proper property values.
  *
+ * DISCLAIMER: This convenience method leverages the Enhanced (simplified) Authflow. The underlying
+ * implementation calls Cognito's `getId()` and `GetCredentialsForIdentity()`.
+ * In this flow there is no way to explicitly set a session policy, resulting in
+ * STS attaching the default policy and limiting the permissions of the federated role.
+ * To be able to explicitly set a session policy, do not use this convenience method.
+ * Instead, you can use the Cognito client to call `getId()`, `GetOpenIdToken()` and then use
+ * that token with your desired session policy to call STS's `AssumeRoleWithWebIdentity()`
+ * For further reading refer to: https://docs.aws.amazon.com/cognito/latest/developerguide/authentication-flow.html
+ *
  * ## Refreshing Credentials from Identity Service
  *
  * In addition to AWS credentials expiring after a given amount of time, the

package/node_modules/aws-sdk/lib/credentials/sso_credentials.js

@@ -176,7 +176,7 @@ AWS.SsoCredentials = AWS.util.inherit(AWS.Credentials, {
       var ssoTokenProvider = new AWS.SSOTokenProvider({
         profile: profileName,
       });
-      ssoTokenProvider.load(function (err) {
+      ssoTokenProvider.get(function (err) {
         if (err) {
           return callback(err);
         }

package/node_modules/aws-sdk/lib/credentials/token_file_web_identity_credentials.d.ts

@@ -1,12 +1,12 @@
 import {Credentials} from '../credentials';
 import {AWSError} from '../error';
-import {ConfigurationOptions} from '../config-base';
+import {ClientConfiguration} from '../../clients/sts';
 export class TokenFileWebIdentityCredentials extends Credentials {
     /**
      * Creates a new credentials object with optional configuraion.
      * @param {Object} clientConfig - a map of configuration options to pass to the underlying STS client.
      */
-    constructor(clientConfig?: ConfigurationOptions);
+    constructor(clientConfig?: ClientConfiguration);
     /**
      * Refreshes credentials using AWS.STS.assumeRoleWithWebIdentity().
      */

package/node_modules/aws-sdk/lib/dynamodb/document_client.d.ts

@@ -655,6 +655,10 @@ export namespace DocumentClient {
      * Represents the provisioned throughput settings for the specified global secondary index. For current minimum and maximum provisioned throughput values, see Service, Account, and Table Quotas in the Amazon DynamoDB Developer Guide.
      */
     ProvisionedThroughput?: ProvisionedThroughput;
+    /**
+     * The maximum number of read and write units for the global secondary index being created. If you use this parameter, you must specify MaxReadRequestUnits, MaxWriteRequestUnits, or both.
+     */
+    OnDemandThroughput?: OnDemandThroughput;
   }
   export interface CreateGlobalTableInput {
     /**
@@ -691,6 +695,10 @@ export namespace DocumentClient {
      * Replica-specific provisioned throughput. If not specified, uses the source table's provisioned throughput settings.
      */
     ProvisionedThroughputOverride?: ProvisionedThroughputOverride;
+    /**
+     * The maximum on-demand throughput settings for the specified replica table being created. You can only modify MaxReadRequestUnits, because you can't modify MaxWriteRequestUnits for individual replica tables. 
+     */
+    OnDemandThroughputOverride?: OnDemandThroughputOverride;
     /**
      * Replica-specific global secondary index settings.
      */
@@ -722,7 +730,7 @@ export namespace DocumentClient {
      */
     GlobalSecondaryIndexes?: GlobalSecondaryIndexList;
     /**
-     * Controls how you are charged for read and write throughput and how you manage capacity. This setting can be changed later.    PROVISIONED - We recommend using PROVISIONED for predictable workloads. PROVISIONED sets the billing mode to Provisioned Mode.    PAY_PER_REQUEST - We recommend using PAY_PER_REQUEST for unpredictable workloads. PAY_PER_REQUEST sets the billing mode to On-Demand Mode.   
+     * Controls how you are charged for read and write throughput and how you manage capacity. This setting can be changed later.    PROVISIONED - We recommend using PROVISIONED for predictable workloads. PROVISIONED sets the billing mode to Provisioned capacity mode.    PAY_PER_REQUEST - We recommend using PAY_PER_REQUEST for unpredictable workloads. PAY_PER_REQUEST sets the billing mode to On-demand capacity mode.   
      */
     BillingMode?: BillingMode;
     /**
@@ -750,9 +758,13 @@ export namespace DocumentClient {
      */
     DeletionProtectionEnabled?: DeletionProtectionEnabled;
     /**
-     * An Amazon Web Services resource-based policy document in JSON format that will be attached to the table. When you attach a resource-based policy while creating a table, the policy creation is strongly consistent. The maximum size supported for a resource-based policy document is 20 KB. DynamoDB counts whitespaces when calculating the size of a policy against this limit. You can’t request an increase for this limit. For a full list of all considerations that you should keep in mind while attaching a resource-based policy, see Resource-based policy considerations.
+     * An Amazon Web Services resource-based policy document in JSON format that will be attached to the table. When you attach a resource-based policy while creating a table, the policy application is strongly consistent. The maximum size supported for a resource-based policy document is 20 KB. DynamoDB counts whitespaces when calculating the size of a policy against this limit. For a full list of all considerations that apply for resource-based policies, see Resource-based policy considerations.  You need to specify the CreateTable and PutResourcePolicy IAM actions for authorizing a user to create a table with a resource-based policy. 
      */
     ResourcePolicy?: ResourcePolicy;
+    /**
+     * Sets the maximum number of read and write units for the specified table in on-demand capacity mode. If you use this parameter, you must specify MaxReadRequestUnits, MaxWriteRequestUnits, or both.
+     */
+    OnDemandThroughput?: OnDemandThroughput;
   }
   export interface CreateTableOutput {
     /**
@@ -867,7 +879,7 @@ export namespace DocumentClient {
      */
     Attributes?: AttributeMap;
     /**
-     * The capacity units consumed by the DeleteItem operation. The data returned includes the total provisioned throughput consumed, along with statistics for the table and any indexes involved in the operation. ConsumedCapacity is only returned if the ReturnConsumedCapacity parameter was specified. For more information, see Provisioned Throughput in the Amazon DynamoDB Developer Guide.
+     * The capacity units consumed by the DeleteItem operation. The data returned includes the total provisioned throughput consumed, along with statistics for the table and any indexes involved in the operation. ConsumedCapacity is only returned if the ReturnConsumedCapacity parameter was specified. For more information, see Provisioned capacity mode in the Amazon DynamoDB Developer Guide.
      */
     ConsumedCapacity?: ConsumedCapacity;
     /**
@@ -905,7 +917,7 @@ export namespace DocumentClient {
   }
   export interface DeleteResourcePolicyOutput {
     /**
-     * A unique string that represents the revision ID of the policy. If you are comparing revision IDs, make sure to always use string comparison logic. This value will be empty if you make a request against a resource without a policy.
+     * A unique string that represents the revision ID of the policy. If you're comparing revision IDs, make sure to always use string comparison logic. This value will be empty if you make a request against a resource without a policy.
      */
     RevisionId?: PolicyRevisionId;
   }
@@ -1454,7 +1466,7 @@ export namespace DocumentClient {
      */
     Item?: AttributeMap;
     /**
-     * The capacity units consumed by the GetItem operation. The data returned includes the total provisioned throughput consumed, along with statistics for the table and any indexes involved in the operation. ConsumedCapacity is only returned if the ReturnConsumedCapacity parameter was specified. For more information, see Provisioned Throughput in the Amazon DynamoDB Developer Guide.
+     * The capacity units consumed by the GetItem operation. The data returned includes the total provisioned throughput consumed, along with statistics for the table and any indexes involved in the operation. ConsumedCapacity is only returned if the ReturnConsumedCapacity parameter was specified. For more information, see Capacity unit consumption for read operations in the Amazon DynamoDB Developer Guide.
      */
     ConsumedCapacity?: ConsumedCapacity;
   }
@@ -1470,7 +1482,7 @@ export namespace DocumentClient {
      */
     Policy?: ResourcePolicy;
     /**
-     * A unique string that represents the revision ID of the policy. If you are comparing revision IDs, make sure to always use string comparison logic.
+     * A unique string that represents the revision ID of the policy. If you're comparing revision IDs, make sure to always use string comparison logic.
      */
     RevisionId?: PolicyRevisionId;
   }
@@ -1491,6 +1503,10 @@ export namespace DocumentClient {
      * Represents the provisioned throughput settings for the specified global secondary index. For current minimum and maximum provisioned throughput values, see Service, Account, and Table Quotas in the Amazon DynamoDB Developer Guide.
      */
     ProvisionedThroughput?: ProvisionedThroughput;
+    /**
+     * The maximum number of read and write units for the specified global secondary index. If you use this parameter, you must specify MaxReadRequestUnits, MaxWriteRequestUnits, or both.
+     */
+    OnDemandThroughput?: OnDemandThroughput;
   }
   export interface GlobalSecondaryIndexAutoScalingUpdate {
     /**
@@ -1537,6 +1553,10 @@ export namespace DocumentClient {
      * The Amazon Resource Name (ARN) that uniquely identifies the index.
      */
     IndexArn?: String;
+    /**
+     * The maximum number of read and write units for the specified global secondary index. If you use this parameter, you must specify MaxReadRequestUnits, MaxWriteRequestUnits, or both.
+     */
+    OnDemandThroughput?: OnDemandThroughput;
   }
   export type GlobalSecondaryIndexDescriptionList = GlobalSecondaryIndexDescription[];
   export interface GlobalSecondaryIndexInfo {
@@ -1556,6 +1576,7 @@ export namespace DocumentClient {
      * Represents the provisioned throughput settings for the specified global secondary index. 
      */
     ProvisionedThroughput?: ProvisionedThroughput;
+    OnDemandThroughput?: OnDemandThroughput;
   }
   export type GlobalSecondaryIndexList = GlobalSecondaryIndex[];
   export interface GlobalSecondaryIndexUpdate {
@@ -2162,6 +2183,22 @@ export namespace DocumentClient {
   export type NullAttributeValue = boolean;
   export type NumberAttributeValue = string;
   export type NumberSetAttributeValue = NumberAttributeValue[];
+  export interface OnDemandThroughput {
+    /**
+     * Maximum number of read request units for the specified table. To specify a maximum OnDemandThroughput on your table, set the value of MaxReadRequestUnits as greater than or equal to 1. To remove the maximum OnDemandThroughput that is currently set on your table, set the value of MaxReadRequestUnits to -1.
+     */
+    MaxReadRequestUnits?: LongObject;
+    /**
+     * Maximum number of write request units for the specified table. To specify a maximum OnDemandThroughput on your table, set the value of MaxWriteRequestUnits as greater than or equal to 1. To remove the maximum OnDemandThroughput that is currently set on your table, set the value of MaxWriteRequestUnits to -1.
+     */
+    MaxWriteRequestUnits?: LongObject;
+  }
+  export interface OnDemandThroughputOverride {
+    /**
+     * Maximum number of read request units for the specified replica table.
+     */
+    MaxReadRequestUnits?: LongObject;
+  }
   export interface ParameterizedStatement {
     /**
      *  A PartiQL statement that uses parameters. 
@@ -2333,7 +2370,7 @@ export namespace DocumentClient {
      */
     Attributes?: AttributeMap;
     /**
-     * The capacity units consumed by the PutItem operation. The data returned includes the total provisioned throughput consumed, along with statistics for the table and any indexes involved in the operation. ConsumedCapacity is only returned if the ReturnConsumedCapacity parameter was specified. For more information, see Provisioned Throughput in the Amazon DynamoDB Developer Guide.
+     * The capacity units consumed by the PutItem operation. The data returned includes the total provisioned throughput consumed, along with statistics for the table and any indexes involved in the operation. ConsumedCapacity is only returned if the ReturnConsumedCapacity parameter was specified. For more information, see Capacity unity consumption for write operations in the Amazon DynamoDB Developer Guide.
      */
     ConsumedCapacity?: ConsumedCapacity;
     /**
@@ -2353,11 +2390,11 @@ export namespace DocumentClient {
      */
     ResourceArn: ResourceArnString;
     /**
-     * An Amazon Web Services resource-based policy document in JSON format. The maximum size supported for a resource-based policy document is 20 KB. DynamoDB counts whitespaces when calculating the size of a policy against this limit. For a full list of all considerations that you should keep in mind while attaching a resource-based policy, see Resource-based policy considerations.
+     * An Amazon Web Services resource-based policy document in JSON format.   The maximum size supported for a resource-based policy document is 20 KB. DynamoDB counts whitespaces when calculating the size of a policy against this limit.   Within a resource-based policy, if the action for a DynamoDB service-linked role (SLR) to replicate data for a global table is denied, adding or deleting a replica will fail with an error.   For a full list of all considerations that apply while attaching a resource-based policy, see Resource-based policy considerations.
      */
     Policy: ResourcePolicy;
     /**
-     * A string value that you can use to conditionally update your policy. You can provide the revision ID of your existing policy to make mutating requests against that policy. When you provide an expected revision ID, if the revision ID of the existing policy on the resource doesn't match or if there's no policy attached to the resource, your request will be rejected with a PolicyNotFoundException. To conditionally put a policy when no policy exists for the resource, specify NO_POLICY for the revision ID.
+     * A string value that you can use to conditionally update your policy. You can provide the revision ID of your existing policy to make mutating requests against that policy.  When you provide an expected revision ID, if the revision ID of the existing policy on the resource doesn't match or if there's no policy attached to the resource, your request will be rejected with a PolicyNotFoundException.  To conditionally attach a policy when no policy exists for the resource, specify NO_POLICY for the revision ID.
      */
     ExpectedRevisionId?: PolicyRevisionId;
     /**
@@ -2367,7 +2404,7 @@ export namespace DocumentClient {
   }
   export interface PutResourcePolicyOutput {
     /**
-     * A unique string that represents the revision ID of the policy. If you are comparing revision IDs, make sure to always use string comparison logic.
+     * A unique string that represents the revision ID of the policy. If you're comparing revision IDs, make sure to always use string comparison logic.
      */
     RevisionId?: PolicyRevisionId;
   }
@@ -2456,7 +2493,7 @@ export namespace DocumentClient {
      */
     LastEvaluatedKey?: Key;
     /**
-     * The capacity units consumed by the Query operation. The data returned includes the total provisioned throughput consumed, along with statistics for the table and any indexes involved in the operation. ConsumedCapacity is only returned if the ReturnConsumedCapacity parameter was specified. For more information, see Provisioned Throughput in the Amazon DynamoDB Developer Guide.
+     * The capacity units consumed by the Query operation. The data returned includes the total provisioned throughput consumed, along with statistics for the table and any indexes involved in the operation. ConsumedCapacity is only returned if the ReturnConsumedCapacity parameter was specified. For more information, see Capacity unit consumption for read operations in the Amazon DynamoDB Developer Guide.
      */
     ConsumedCapacity?: ConsumedCapacity;
   }
@@ -2521,6 +2558,10 @@ export namespace DocumentClient {
      * Replica-specific provisioned throughput. If not described, uses the source table's provisioned throughput settings.
      */
     ProvisionedThroughputOverride?: ProvisionedThroughputOverride;
+    /**
+     * Overrides the maximum on-demand throughput settings for the specified replica table.
+     */
+    OnDemandThroughputOverride?: OnDemandThroughputOverride;
     /**
      * Replica-specific global secondary index settings.
      */
@@ -2541,6 +2582,10 @@ export namespace DocumentClient {
      * Replica table GSI-specific provisioned throughput. If not specified, uses the source table GSI's read capacity settings.
      */
     ProvisionedThroughputOverride?: ProvisionedThroughputOverride;
+    /**
+     * Overrides the maximum on-demand throughput settings for the specified global secondary index in the specified replica table.
+     */
+    OnDemandThroughputOverride?: OnDemandThroughputOverride;
   }
   export interface ReplicaGlobalSecondaryIndexAutoScalingDescription {
     /**
@@ -2572,6 +2617,10 @@ export namespace DocumentClient {
      * If not described, uses the source table GSI's read capacity settings.
      */
     ProvisionedThroughputOverride?: ProvisionedThroughputOverride;
+    /**
+     * Overrides the maximum on-demand throughput for the specified global secondary index in the specified replica table.
+     */
+    OnDemandThroughputOverride?: OnDemandThroughputOverride;
   }
   export type ReplicaGlobalSecondaryIndexDescriptionList = ReplicaGlobalSecondaryIndexDescription[];
   export type ReplicaGlobalSecondaryIndexList = ReplicaGlobalSecondaryIndex[];
@@ -2752,6 +2801,7 @@ export namespace DocumentClient {
      * Provisioned throughput settings for the restored table.
      */
     ProvisionedThroughputOverride?: ProvisionedThroughput;
+    OnDemandThroughputOverride?: OnDemandThroughput;
     /**
      * The new server-side encryption settings for the restored table.
      */
@@ -2800,6 +2850,7 @@ export namespace DocumentClient {
      * Provisioned throughput settings for the restored table.
      */
     ProvisionedThroughputOverride?: ProvisionedThroughput;
+    OnDemandThroughputOverride?: OnDemandThroughput;
     /**
      * The new server-side encryption settings for the restored table.
      */
@@ -2951,7 +3002,7 @@ export namespace DocumentClient {
      */
     LastEvaluatedKey?: Key;
     /**
-     * The capacity units consumed by the Scan operation. The data returned includes the total provisioned throughput consumed, along with statistics for the table and any indexes involved in the operation. ConsumedCapacity is only returned if the ReturnConsumedCapacity parameter was specified. For more information, see Provisioned Throughput in the Amazon DynamoDB Developer Guide.
+     * The capacity units consumed by the Scan operation. The data returned includes the total provisioned throughput consumed, along with statistics for the table and any indexes involved in the operation. ConsumedCapacity is only returned if the ReturnConsumedCapacity parameter was specified. For more information, see Capacity unit consumption for read operations in the Amazon DynamoDB Developer Guide.
      */
     ConsumedCapacity?: ConsumedCapacity;
   }
@@ -2988,6 +3039,7 @@ export namespace DocumentClient {
      * Read IOPs and Write IOPS on the table when the backup was created.
      */
     ProvisionedThroughput: ProvisionedThroughput;
+    OnDemandThroughput?: OnDemandThroughput;
     /**
      * Number of items in the table. Note that this is an approximate value. 
      */
@@ -3080,6 +3132,7 @@ export namespace DocumentClient {
      */
     BillingMode?: BillingMode;
     ProvisionedThroughput?: ProvisionedThroughput;
+    OnDemandThroughput?: OnDemandThroughput;
     SSESpecification?: SSESpecification;
     /**
      *  The Global Secondary Indexes (GSI) of the table to be created as part of the import operation. 
@@ -3179,6 +3232,10 @@ export namespace DocumentClient {
      * Indicates whether deletion protection is enabled (true) or disabled (false) on the table.
      */
     DeletionProtectionEnabled?: DeletionProtectionEnabled;
+    /**
+     * The maximum number of read and write units for the specified on-demand table. If you use this parameter, you must specify MaxReadRequestUnits, MaxWriteRequestUnits, or both.
+     */
+    OnDemandThroughput?: OnDemandThroughput;
   }
   export type TableId = string;
   export type TableName = string;
@@ -3397,7 +3454,11 @@ export namespace DocumentClient {
     /**
      * Represents the provisioned throughput settings for the specified global secondary index. For current minimum and maximum provisioned throughput values, see Service, Account, and Table Quotas in the Amazon DynamoDB Developer Guide.
      */
-    ProvisionedThroughput: ProvisionedThroughput;
+    ProvisionedThroughput?: ProvisionedThroughput;
+    /**
+     * Updates the maximum number of read and write units for the specified global secondary index. If you use this parameter, you must specify MaxReadRequestUnits, MaxWriteRequestUnits, or both.
+     */
+    OnDemandThroughput?: OnDemandThroughput;
   }
   export interface UpdateGlobalTableInput {
     /**
@@ -3421,7 +3482,7 @@ export namespace DocumentClient {
      */
     GlobalTableName: TableName;
     /**
-     * The billing mode of the global table. If GlobalTableBillingMode is not specified, the global table defaults to PROVISIONED capacity billing mode.    PROVISIONED - We recommend using PROVISIONED for predictable workloads. PROVISIONED sets the billing mode to Provisioned Mode.    PAY_PER_REQUEST - We recommend using PAY_PER_REQUEST for unpredictable workloads. PAY_PER_REQUEST sets the billing mode to On-Demand Mode.   
+     * The billing mode of the global table. If GlobalTableBillingMode is not specified, the global table defaults to PROVISIONED capacity billing mode.    PROVISIONED - We recommend using PROVISIONED for predictable workloads. PROVISIONED sets the billing mode to Provisioned capacity mode.    PAY_PER_REQUEST - We recommend using PAY_PER_REQUEST for unpredictable workloads. PAY_PER_REQUEST sets the billing mode to On-demand capacity mode.   
      */
     GlobalTableBillingMode?: BillingMode;
     /**
@@ -3508,7 +3569,7 @@ export namespace DocumentClient {
      */
     Attributes?: AttributeMap;
     /**
-     * The capacity units consumed by the UpdateItem operation. The data returned includes the total provisioned throughput consumed, along with statistics for the table and any indexes involved in the operation. ConsumedCapacity is only returned if the ReturnConsumedCapacity parameter was specified. For more information, see Provisioned Throughput in the Amazon DynamoDB Developer Guide.
+     * The capacity units consumed by the UpdateItem operation. The data returned includes the total provisioned throughput consumed, along with statistics for the table and any indexes involved in the operation. ConsumedCapacity is only returned if the ReturnConsumedCapacity parameter was specified. For more information, see Capacity unity consumption for write operations in the Amazon DynamoDB Developer Guide.
      */
     ConsumedCapacity?: ConsumedCapacity;
     /**
@@ -3567,6 +3628,10 @@ export namespace DocumentClient {
      * Replica-specific provisioned throughput. If not specified, uses the source table's provisioned throughput settings.
      */
     ProvisionedThroughputOverride?: ProvisionedThroughputOverride;
+    /**
+     * Overrides the maximum on-demand throughput for the replica table.
+     */
+    OnDemandThroughputOverride?: OnDemandThroughputOverride;
     /**
      * Replica-specific global secondary index settings.
      */
@@ -3586,7 +3651,7 @@ export namespace DocumentClient {
      */
     TableName: TableArn;
     /**
-     * Controls how you are charged for read and write throughput and how you manage capacity. When switching from pay-per-request to provisioned capacity, initial provisioned capacity values must be set. The initial provisioned capacity values are estimated based on the consumed read and write capacity of your table and global secondary indexes over the past 30 minutes.    PROVISIONED - We recommend using PROVISIONED for predictable workloads. PROVISIONED sets the billing mode to Provisioned Mode.    PAY_PER_REQUEST - We recommend using PAY_PER_REQUEST for unpredictable workloads. PAY_PER_REQUEST sets the billing mode to On-Demand Mode.   
+     * Controls how you are charged for read and write throughput and how you manage capacity. When switching from pay-per-request to provisioned capacity, initial provisioned capacity values must be set. The initial provisioned capacity values are estimated based on the consumed read and write capacity of your table and global secondary indexes over the past 30 minutes.    PROVISIONED - We recommend using PROVISIONED for predictable workloads. PROVISIONED sets the billing mode to Provisioned capacity mode.    PAY_PER_REQUEST - We recommend using PAY_PER_REQUEST for unpredictable workloads. PAY_PER_REQUEST sets the billing mode to On-demand capacity mode.   
      */
     BillingMode?: BillingMode;
     /**
@@ -3606,7 +3671,7 @@ export namespace DocumentClient {
      */
     SSESpecification?: SSESpecification;
     /**
-     * A list of replica update actions (create, delete, or update) for the table.  This property only applies to Version 2019.11.21 (Current) of global tables.  
+     * A list of replica update actions (create, delete, or update) for the table.  For global tables, this property only applies to global tables using Version 2019.11.21 (Current version).  
      */
     ReplicaUpdates?: ReplicationGroupUpdateList;
     /**
@@ -3617,6 +3682,10 @@ export namespace DocumentClient {
      * Indicates whether deletion protection is to be enabled (true) or disabled (false) on the table.
      */
     DeletionProtectionEnabled?: DeletionProtectionEnabled;
+    /**
+     * Updates the maximum number of read and write units for the specified table in on-demand capacity mode. If you use this parameter, you must specify MaxReadRequestUnits, MaxWriteRequestUnits, or both.
+     */
+    OnDemandThroughput?: OnDemandThroughput;
   }
   export interface UpdateTableOutput {
     /**

package/node_modules/aws-sdk/lib/metadata_service.d.ts

@@ -17,6 +17,10 @@ export class MetadataService {
         options: {method?: string, headers?: {[key: string]: String} },
         callback: (err: AWSError, data: string) => void
     ): void;
+    /**
+     * Fetches metadata token used for authenticating against the instance metadata service.
+     */
+    fetchMetadataToken(callback: (err: AWSError, token: string) => void): void;
     /**
      * 169.254.169.254
      */

package/node_modules/aws-sdk/lib/metadata_service.js

@@ -120,9 +120,8 @@ AWS.MetadataService = inherit({
   loadCredentialsCallbacks: [],
 
   /**
-   * Fetches metadata token used for getting credentials
+   * Fetches metadata token used for authenticating against the instance metadata service.
    *
-   * @api private
    * @callback callback function(err, token)
    *   Called when token is loaded from the resource
    */

package/node_modules/aws-sdk/lib/protocol/rest_json.js

@@ -1,3 +1,4 @@
+var AWS = require('../core');
 var util = require('../util');
 var Rest = require('./rest');
 var Json = require('./json');
@@ -75,7 +76,7 @@ function extractData(resp) {
     var body = resp.httpResponse.body;
     if (payloadMember.isEventStream) {
       parser = new JsonParser();
-      resp.data[payload] = util.createEventStream(
+      resp.data[rules.payload] = util.createEventStream(
         AWS.HttpClient.streamsApiVersion === 2 ? resp.httpResponse.stream : body,
         parser,
         payloadMember

package/node_modules/aws-sdk/lib/query/query_param_serializer.js

@@ -42,7 +42,9 @@ function serializeList(name, list, rules, fn) {
   var memberRules = rules.member || {};
 
   if (list.length === 0) {
-    fn.call(this, name, null);
+    if (rules.api.protocol !== 'ec2') {
+      fn.call(this, name, null);
+    }
     return;
   }
 

package/node_modules/aws-sdk/lib/region_config.js

@@ -90,7 +90,8 @@ function getEndpointSuffix(region) {
     '^cn\\-\\w+\\-\\d+$': 'amazonaws.com.cn',
     '^us\\-gov\\-\\w+\\-\\d+$': 'amazonaws.com',
     '^us\\-iso\\-\\w+\\-\\d+$': 'c2s.ic.gov',
-    '^us\\-isob\\-\\w+\\-\\d+$': 'sc2s.sgov.gov'
+    '^us\\-isob\\-\\w+\\-\\d+$': 'sc2s.sgov.gov',
+    '^eu\\-isoe\\-west\\-1$': 'cloud.adc-e.uk',
   };
   var defaultSuffix = 'amazonaws.com';
   var regexes = Object.keys(regionRegexes);

package/node_modules/aws-sdk/lib/services/s3.js

@@ -531,17 +531,21 @@ AWS.util.update(AWS.S3.prototype, {
    * @api private
    */
   extractErrorFrom200Response: function extractErrorFrom200Response(resp) {
-    if (!operationsWith200StatusCodeError[resp.request.operation]) return;
+    var service = this.service ? this.service : this;
+    if (!service.is200Error(resp) && !operationsWith200StatusCodeError[resp.request.operation]) {
+      return;
+    }
     var httpResponse = resp.httpResponse;
-    if (httpResponse.body && httpResponse.body.toString().match('<Error>')) {
+    var bodyString = httpResponse.body && httpResponse.body.toString() || '';
+    if (bodyString && bodyString.indexOf('</Error>') === bodyString.length - 8) {
       // Response body with '<Error>...</Error>' indicates an exception.
       // Get S3 client object. In ManagedUpload, this.service refers to
       // S3 client object.
       resp.data = null;
-      var service = this.service ? this.service : this;
       service.extractError(resp);
+      resp.error.is200Error = true;
       throw resp.error;
-    } else if (!httpResponse.body || !httpResponse.body.toString().match(/<[\w_]/)) {
+    } else if (!httpResponse.body || !bodyString.match(/<[\w_]/)) {
       // When body is empty or incomplete, S3 might stop the request on detecting client
       // side aborting the request.
       resp.data = null;
@@ -552,13 +556,54 @@ AWS.util.update(AWS.S3.prototype, {
     }
   },
 
+  /**
+   * @api private
+   * @param resp - to evaluate.
+   * @return true if the response has status code 200 but is an error.
+   */
+  is200Error: function is200Error(resp) {
+    var code = resp && resp.httpResponse && resp.httpResponse.statusCode;
+    if (code !== 200) {
+      return false;
+    }
+    try {
+      var req = resp.request;
+      var outputMembers = req.service.api.operations[req.operation].output.members;
+      var keys = Object.keys(outputMembers);
+      for (var i = 0; i < keys.length; ++i) {
+        var member = outputMembers[keys[i]];
+        if (member.type === 'binary' && member.isStreaming) {
+          return false;
+        }
+      }
+
+      var body = resp.httpResponse.body;
+      if (body && body.byteLength !== undefined) {
+        if (body.byteLength < 15 || body.byteLength > 3000) {
+          // body is too short or long to be an error message.
+          return false;
+        }
+      }
+      if (!body) {
+        return false;
+      }
+      var bodyString = body.toString();
+      if (bodyString.indexOf('</Error>') === bodyString.length - 8) {
+        return true;
+      }
+    } catch (e) {
+      return false;
+    }
+    return false;
+  },
+
   /**
    * @return [Boolean] whether the error can be retried
    * @api private
    */
   retryableError: function retryableError(error, request) {
-    if (operationsWith200StatusCodeError[request.operation] &&
-        error.statusCode === 200) {
+    if (error.is200Error ||
+       (operationsWith200StatusCodeError[request.operation] && error.statusCode === 200)) {
       return true;
     } else if (request._requestRegionForBucket &&
         request.service.bucketRegionCache[request._requestRegionForBucket]) {

package/node_modules/aws-sdk/lib/shared-ini/ini-loader.d.ts

@@ -24,7 +24,30 @@ export class IniLoader{
  * Load configurations from config/credentials files and cache them 
  * for later use. If no file is specified it will try to load default
  * files.
- * @returns {object} object of all profile information in the file
+ * @returns {Record<string, string>} object of all profile information in the file
  */
   loadFrom(options: LoadFileOptions): IniFileContent;
+
+  /**
+ * Load sso sessions from config/credentials files and cache them 
+ * for later use. If no file is specified it will try to load default
+ * files.
+ * @returns {Record<string, string>} object of all sso sessions information in the file
+ */
+  loadSsoSessionsFrom(options: LoadFileOptions): IniFileContent;
+
+  /**
+   * Get default file path for config/credentials files.
+   * 
+   * @param isConfig whether the file is a config file or a credentials file
+   * @returns {string} default file path
+   */
+  getDefaultFilePath(isConfig: boolean): string;
+
+  /**
+   * Get Home directory of the current user.
+   * 
+   * @returns {string} home directory path
+   * */
+   getHomeDir(): string;
 }

package/node_modules/aws-sdk/lib/shared-ini/ini-loader.js

@@ -103,9 +103,6 @@ AWS.IniLoader = AWS.util.inherit({
     return this.resolvedSsoSessions[filename];
   },
 
-  /**
-   * @api private
-   */
   getDefaultFilePath: function getDefaultFilePath(isConfig) {
     return path.join(
       this.getHomeDir(),
@@ -114,9 +111,6 @@ AWS.IniLoader = AWS.util.inherit({
     );
   },
 
-  /**
-   * @api private
-   */
   getHomeDir: function getHomeDir() {
     var env = process.env;
     var home = env.HOME ||