cdk-lambda-subminute 2.0.368 → 2.0.370

package/node_modules/aws-sdk/clients/mediaconvert.d.ts

@@ -252,7 +252,7 @@ declare namespace MediaConvert {
      */
     Bitrate?: __integerMin6000Max1024000;
     /**
-     * Specify the AAC profile. For the widest player compatibility and where higher bitrates are acceptable: Keep the default profile, LC (AAC-LC) For improved audio performance at lower bitrates: Choose HEV1 or HEV2. HEV1 (AAC-HE v1) adds spectral band replication to improve speech audio at low bitrates. HEV2 (AAC-HE v2) adds parametric stereo, which optimizes for encoding stereo audio at very low bitrates.
+     * AAC Profile.
      */
     CodecProfile?: AacCodecProfile;
     /**
@@ -260,7 +260,7 @@ declare namespace MediaConvert {
      */
     CodingMode?: AacCodingMode;
     /**
-     * Specify the AAC rate control mode. For a constant bitrate: Choose CBR. Your AAC output bitrate will be equal to the value that you choose for Bitrate. For a variable bitrate: Choose VBR. Your AAC output bitrate will vary according to your audio content and the value that you choose for Bitrate quality.
+     * Rate Control Mode.
      */
     RateControlMode?: AacRateControlMode;
     /**
@@ -268,7 +268,7 @@ declare namespace MediaConvert {
      */
     RawFormat?: AacRawFormat;
     /**
-     * Specify the AAC sample rate in samples per second (Hz). Valid sample rates depend on the AAC profile and Coding mode that you select. For a list of supported sample rates, see: https://docs.aws.amazon.com/mediaconvert/latest/ug/aac-support.html
+     * Specify the Sample rate in Hz. Valid sample rates depend on the Profile and Coding mode that you select. The following list shows valid sample rates for each Profile and Coding mode. * LC Profile, Coding mode 1.0, 2.0, and Receiver Mix: 8000, 12000, 16000, 22050, 24000, 32000, 44100, 48000, 88200, 96000. * LC Profile, Coding mode 5.1: 32000, 44100, 48000, 96000. * HEV1 Profile, Coding mode 1.0 and Receiver Mix: 22050, 24000, 32000, 44100, 48000. * HEV1 Profile, Coding mode 2.0 and 5.1: 32000, 44100, 48000, 96000. * HEV2 Profile, Coding mode 2.0: 22050, 24000, 32000, 44100, 48000.
      */
     SampleRate?: __integerMin8000Max96000;
     /**
@@ -276,7 +276,7 @@ declare namespace MediaConvert {
      */
     Specification?: AacSpecification;
     /**
-     * Specify the quality of your variable bitrate (VBR) AAC audio. For a list of approximate VBR bitrates, see: https://docs.aws.amazon.com/mediaconvert/latest/ug/aac-support.html#aac_vbr
+     * VBR Quality Level - Only used if rate_control_mode is VBR.
      */
     VbrQuality?: AacVbrQuality;
   }
@@ -498,7 +498,7 @@ declare namespace MediaConvert {
     /**
      * Specify the language for this audio output track. The service puts this language code into your output audio track when you set Language code control to Use configured. The service also uses your specified custom language code when you set Language code control to Follow input, but your input file doesn't specify a language code. For all outputs, you can use an ISO 639-2 or ISO 639-3 code. For streaming outputs, you can also use any other code in the full RFC-5646 specification. Streaming outputs are those that are in one of the following output groups: CMAF, DASH ISO, Apple HLS, or Microsoft Smooth Streaming.
      */
-    CustomLanguageCode?: __stringPatternAZaZ23AZaZ;
+    CustomLanguageCode?: __stringPatternAZaZ23AZaZ09;
     /**
      * Indicates the language of the audio output track. The ISO 639 language specified in the 'Language Code' drop down will be used when 'Follow Input Language Code' is not selected or when 'Follow Input Language Code' is selected but there is no ISO 639 language code specified by the input.
      */
@@ -1361,7 +1361,6 @@ When you specify Version 1, you must also set ID3 metadata to Passthrough.
      */
     OutputMasteringLuminance?: __integerMin0Max2147483647;
   }
-  export type ColorConversion3DLUTSettings = ColorConversion3DLUTSetting[];
   export interface ColorCorrector {
     /**
      * Brightness level.
@@ -3688,7 +3687,7 @@ Within your job settings, all of your DVB-Sub settings must be identical.
     /**
      * Use 3D LUTs to specify custom color mapping behavior when you convert from one color space into another. You can include up to 8 different 3D LUTs.
      */
-    ColorConversion3DLUTSettings?: ColorConversion3DLUTSettings;
+    ColorConversion3DLUTSettings?: __listOfColorConversion3DLUTSetting;
     /**
      * Settings for Event Signaling And Messaging (ESAM). If you don't do ad insertion, you can ignore these settings.
      */
@@ -3802,7 +3801,7 @@ Within your job settings, all of your DVB-Sub settings must be identical.
     /**
      * Use 3D LUTs to specify custom color mapping behavior when you convert from one color space into another. You can include up to 8 different 3D LUTs.
      */
-    ColorConversion3DLUTSettings?: ColorConversion3DLUTSettings;
+    ColorConversion3DLUTSettings?: __listOfColorConversion3DLUTSetting;
     /**
      * Settings for Event Signaling And Messaging (ESAM). If you don't do ad insertion, you can ignore these settings.
      */
@@ -5271,6 +5270,14 @@ When you specify Version 1, you must also set ID3 metadata to Passthrough.
     Y?: __integerMin0Max2147483647;
   }
   export interface RemixSettings {
+    /**
+     * Optionally specify the channel in your input that contains your audio description audio signal. MediaConvert mixes your audio signal across all output channels, while reducing their volume according to your data stream. When you specify an audio description audio channel, you must also specify an audio description data channel. For more information about audio description signals, see the BBC WHP 198 and 051 white papers.
+     */
+    AudioDescriptionAudioChannel?: __integerMin1Max64;
+    /**
+     * Optionally specify the channel in your input that contains your audio description data stream. MediaConvert mixes your audio signal across all output channels, while reducing their volume according to your data stream. When you specify an audio description data channel, you must also specify an audio description audio channel. For more information about audio description signals, see the BBC WHP 198 and 051 white papers.
+     */
+    AudioDescriptionDataChannel?: __integerMin1Max64;
     /**
      * Channel mapping contains the group of fields that hold the remixing value for each channel, in dB. Specify remix values to indicate how much of the content from your input audio channel you want in your output audio channels. Each instance of the InputChannels or InputChannelsFineTune array specifies these values for one output channel. Use one instance of this array for each output channel. In the console, each array corresponds to a column in the graphical depiction of the mapping matrix. The rows of the graphical matrix correspond to input channels. Valid values are within the range from -60 (mute) through 6. A setting of 0 passes the input channel unchanged to the output channel (no attenuation or amplification). Use InputChannels or InputChannelsFineTune to specify your remix values. Don't use both.
      */
@@ -6483,6 +6490,7 @@ When you specify Version 1, you must also set ID3 metadata to Passthrough.
   export type __listOfCaptionDescription = CaptionDescription[];
   export type __listOfCaptionDescriptionPreset = CaptionDescriptionPreset[];
   export type __listOfCmafAdditionalManifest = CmafAdditionalManifest[];
+  export type __listOfColorConversion3DLUTSetting = ColorConversion3DLUTSetting[];
   export type __listOfDashAdditionalManifest = DashAdditionalManifest[];
   export type __listOfEndpoint = Endpoint[];
   export type __listOfForceIncludeRenditionSize = ForceIncludeRenditionSize[];
@@ -6557,6 +6565,7 @@ When you specify Version 1, you must also set ID3 metadata to Passthrough.
   export type __stringPatternAZaZ0902 = string;
   export type __stringPatternAZaZ0932 = string;
   export type __stringPatternAZaZ23AZaZ = string;
+  export type __stringPatternAZaZ23AZaZ09 = string;
   export type __stringPatternArnAwsUsGovAcm = string;
   export type __stringPatternArnAwsUsGovCnKmsAZ26EastWestCentralNorthSouthEastWest1912D12KeyAFAF098AFAF094AFAF094AFAF094AFAF0912MrkAFAF0932 = string;
   export type __stringPatternDD = string;

package/node_modules/aws-sdk/clients/opensearch.d.ts

@@ -51,6 +51,14 @@ declare class OpenSearch extends Service {
    * Provides access to an Amazon OpenSearch Service domain through the use of an interface VPC endpoint.
    */
   authorizeVpcEndpointAccess(callback?: (err: AWSError, data: OpenSearch.Types.AuthorizeVpcEndpointAccessResponse) => void): Request<OpenSearch.Types.AuthorizeVpcEndpointAccessResponse, AWSError>;
+  /**
+   * Cancels a pending configuration change on an Amazon OpenSearch Service domain.
+   */
+  cancelDomainConfigChange(params: OpenSearch.Types.CancelDomainConfigChangeRequest, callback?: (err: AWSError, data: OpenSearch.Types.CancelDomainConfigChangeResponse) => void): Request<OpenSearch.Types.CancelDomainConfigChangeResponse, AWSError>;
+  /**
+   * Cancels a pending configuration change on an Amazon OpenSearch Service domain.
+   */
+  cancelDomainConfigChange(callback?: (err: AWSError, data: OpenSearch.Types.CancelDomainConfigChangeResponse) => void): Request<OpenSearch.Types.CancelDomainConfigChangeResponse, AWSError>;
   /**
    * Cancels a scheduled service software update for an Amazon OpenSearch Service domain. You can only perform this operation before the AutomatedUpdateDate and when the domain's UpdateStatus is PENDING_UPDATE. For more information, see Service software updates in Amazon OpenSearch Service.
    */
@@ -852,6 +860,27 @@ declare namespace OpenSearch {
   export type AvailabilityZoneList = AvailabilityZone[];
   export type BackendRole = string;
   export type Boolean = boolean;
+  export interface CancelDomainConfigChangeRequest {
+    DomainName: DomainName;
+    /**
+     * When set to True, returns the list of change IDs and properties that will be cancelled without actually cancelling the change.
+     */
+    DryRun?: DryRun;
+  }
+  export interface CancelDomainConfigChangeResponse {
+    /**
+     * The unique identifiers of the changes that were cancelled.
+     */
+    CancelledChangeIds?: GUIDList;
+    /**
+     * The domain change properties that were cancelled.
+     */
+    CancelledChangeProperties?: CancelledChangePropertyList;
+    /**
+     * Whether or not the request was a dry run. If True, the changes were not actually cancelled. 
+     */
+    DryRun?: DryRun;
+  }
   export interface CancelServiceSoftwareUpdateRequest {
     /**
      * Name of the OpenSearch Service domain that you want to cancel the service software update on.
@@ -864,6 +893,21 @@ declare namespace OpenSearch {
      */
     ServiceSoftwareOptions?: ServiceSoftwareOptions;
   }
+  export interface CancelledChangeProperty {
+    /**
+     * The name of the property whose change was cancelled.
+     */
+    PropertyName?: String;
+    /**
+     * The pending value of the property that was cancelled. This would have been the eventual value of the property if the chance had not been cancelled.
+     */
+    CancelledValue?: String;
+    /**
+     * The current value of the property, after the change was cancelled.
+     */
+    ActiveValue?: String;
+  }
+  export type CancelledChangePropertyList = CancelledChangeProperty[];
   export interface ChangeProgressDetails {
     /**
      * The ID of the configuration change.
@@ -873,6 +917,22 @@ declare namespace OpenSearch {
      * A message corresponding to the status of the configuration change.
      */
     Message?: Message;
+    /**
+     * The current status of the configuration change.
+     */
+    ConfigChangeStatus?: ConfigChangeStatus;
+    /**
+     * The IAM principal who initiated the configuration change.
+     */
+    InitiatedBy?: InitiatedBy;
+    /**
+     * The time that the configuration change was initiated, in Universal Coordinated Time (UTC).
+     */
+    StartTime?: UpdateTimestamp;
+    /**
+     * The last time that the configuration change was updated.
+     */
+    LastUpdatedTime?: UpdateTimestamp;
   }
   export interface ChangeProgressStage {
     /**
@@ -924,6 +984,18 @@ declare namespace OpenSearch {
      * The specific stages that the domain is going through to perform the configuration change.
      */
     ChangeProgressStages?: ChangeProgressStageList;
+    /**
+     * The last time that the status of the configuration change was updated.
+     */
+    LastUpdatedTime?: UpdateTimestamp;
+    /**
+     * The current status of the configuration change.
+     */
+    ConfigChangeStatus?: ConfigChangeStatus;
+    /**
+     * The IAM principal who initiated the configuration change.
+     */
+    InitiatedBy?: InitiatedBy;
   }
   export type ClientToken = string;
   export type CloudWatchLogsLogGroupArn = string;
@@ -1033,6 +1105,7 @@ declare namespace OpenSearch {
      */
     TargetVersions?: VersionList;
   }
+  export type ConfigChangeStatus = "Pending"|"Initializing"|"Validating"|"ValidationFailed"|"ApplyingChanges"|"Completed"|"PendingUserInput"|"Cancelled"|string;
   export type ConnectionAlias = string;
   export type ConnectionId = string;
   export type ConnectionMode = "DIRECT"|"VPC_ENDPOINT"|string;
@@ -1774,6 +1847,10 @@ declare namespace OpenSearch {
      * Software update options for the domain.
      */
     SoftwareUpdateOptions?: SoftwareUpdateOptionsStatus;
+    /**
+     * Information about the domain properties that are currently being modified.
+     */
+    ModifyingProperties?: ModifyingPropertiesList;
   }
   export interface DomainEndpointOptions {
     /**
@@ -1939,6 +2016,7 @@ declare namespace OpenSearch {
   }
   export type DomainPackageDetailsList = DomainPackageDetails[];
   export type DomainPackageStatus = "ASSOCIATING"|"ASSOCIATION_FAILED"|"ACTIVE"|"DISSOCIATING"|"DISSOCIATION_FAILED"|string;
+  export type DomainProcessingStatusType = "Creating"|"Active"|"Modifying"|"UpgradingEngineVersion"|"UpdatingServiceSoftware"|"Isolated"|"Deleting"|string;
   export type DomainState = "Active"|"Processing"|"NotAvailable"|string;
   export interface DomainStatus {
     /**
@@ -2057,6 +2135,14 @@ declare namespace OpenSearch {
      * Service software update options for the domain.
      */
     SoftwareUpdateOptions?: SoftwareUpdateOptions;
+    /**
+     * The status of any changes that are currently in progress for the domain.
+     */
+    DomainProcessingStatus?: DomainProcessingStatusType;
+    /**
+     * Information about the domain properties that are currently being modified.
+     */
+    ModifyingProperties?: ModifyingPropertiesList;
   }
   export type DomainStatusList = DomainStatus[];
   export type Double = number;
@@ -2192,6 +2278,7 @@ declare namespace OpenSearch {
   }
   export type FilterList = Filter[];
   export type GUID = string;
+  export type GUIDList = GUID[];
   export interface GetCompatibleVersionsRequest {
     /**
      * The name of an existing domain. Provide this parameter to limit the results to a single domain.
@@ -2379,6 +2466,7 @@ declare namespace OpenSearch {
   }
   export type InboundConnectionStatusCode = "PENDING_ACCEPTANCE"|"APPROVED"|"PROVISIONING"|"ACTIVE"|"REJECTING"|"REJECTED"|"DELETING"|"DELETED"|string;
   export type InboundConnections = InboundConnection[];
+  export type InitiatedBy = "CUSTOMER"|"SERVICE"|string;
   export type InstanceCount = number;
   export interface InstanceCountLimits {
     /**
@@ -2755,6 +2843,25 @@ declare namespace OpenSearch {
   export type MaximumInstanceCount = number;
   export type Message = string;
   export type MinimumInstanceCount = number;
+  export interface ModifyingProperties {
+    /**
+     * The name of the property that is currently being modified.
+     */
+    Name?: String;
+    /**
+     * The current value of the domain property that is being modified.
+     */
+    ActiveValue?: String;
+    /**
+     * The value that the property that is currently being modified will eventually have.
+     */
+    PendingValue?: String;
+    /**
+     * The type of value that is currently being modified. Properties can have two types:    PLAIN_TEXT: Contain direct values such as "1", "True", or "c5.large.search".    STRINGIFIED_JSON: Contain content in JSON format, such as {"Enabled":"True"}".  
+     */
+    ValueType?: PropertyValueType;
+  }
+  export type ModifyingPropertiesList = ModifyingProperties[];
   export type NextToken = string;
   export type NodeId = string;
   export type NodeStatus = "Active"|"StandBy"|"NotAvailable"|string;
@@ -2985,6 +3092,7 @@ declare namespace OpenSearch {
   export type PluginVersion = string;
   export type PolicyDocument = string;
   export type PrincipalType = "AWS_ACCOUNT"|"AWS_SERVICE"|string;
+  export type PropertyValueType = "PLAIN_TEXT"|"STRINGIFIED_JSON"|string;
   export interface PurchaseReservedInstanceOfferingRequest {
     /**
      * The ID of the Reserved Instance offering to purchase.

package/node_modules/aws-sdk/clients/quicksight.d.ts

@@ -2666,6 +2666,10 @@ declare namespace QuickSight {
      * The contribution analysis (anomaly configuration) setup of the visual.
      */
     ContributionAnalysisDefaults?: ContributionAnalysisDefaultList;
+    /**
+     * The general visual interactions setup for a visual.
+     */
+    Interactions?: VisualInteractionOptions;
   }
   export interface BarChartFieldWells {
     /**
@@ -2848,6 +2852,10 @@ declare namespace QuickSight {
      * The palette (chart color) display setup of the visual.
      */
     VisualPalette?: VisualPalette;
+    /**
+     * The general visual interactions setup for a visual.
+     */
+    Interactions?: VisualInteractionOptions;
   }
   export type BoxPlotDimensionFieldList = DimensionField[];
   export interface BoxPlotFieldWells {
@@ -3410,6 +3418,10 @@ declare namespace QuickSight {
      * The palette (chart color) display setup of the visual.
      */
     VisualPalette?: VisualPalette;
+    /**
+     * The general visual interactions setup for a visual.
+     */
+    Interactions?: VisualInteractionOptions;
   }
   export interface ComboChartFieldWells {
     /**
@@ -3626,6 +3638,12 @@ declare namespace QuickSight {
     Color?: HexColor;
   }
   export type ConstantType = "SINGULAR"|"RANGE"|"COLLECTIVE"|string;
+  export interface ContextMenuOption {
+    /**
+     * The availability status of the context menu options. If the value of this property is set to ENABLED, dashboard readers can interact with the context menu.
+     */
+    AvailabilityStatus?: DashboardBehavior;
+  }
   export interface ContributionAnalysisDefault {
     /**
      * The measure field that is used in the contribution analysis.
@@ -4873,6 +4891,10 @@ declare namespace QuickSight {
      * The sizing options for the size of the custom content visual. This structure is required when the ContentType of the visual is 'IMAGE'.
      */
     ImageScaling?: CustomContentImageScalingConfiguration;
+    /**
+     * The general visual interactions setup for a visual.
+     */
+    Interactions?: VisualInteractionOptions;
   }
   export type CustomContentImageScalingConfiguration = "FIT_TO_HEIGHT"|"FIT_TO_WIDTH"|"DO_NOT_SCALE"|"SCALE_TO_VISUAL"|string;
   export type CustomContentType = "IMAGE"|"OTHER_EMBEDDED_CONTENT"|string;
@@ -8873,6 +8895,10 @@ declare namespace QuickSight {
      * The map style options of the filled map visual.
      */
     MapStyleOptions?: GeospatialMapStyleOptions;
+    /**
+     * The general visual interactions setup for a visual.
+     */
+    Interactions?: VisualInteractionOptions;
   }
   export type FilledMapDimensionFieldList = DimensionField[];
   export interface FilledMapFieldWells {
@@ -9610,6 +9636,10 @@ declare namespace QuickSight {
      * The visual palette configuration of a FunnelChartVisual.
      */
     VisualPalette?: VisualPalette;
+    /**
+     * The general visual interactions setup for a visual.
+     */
+    Interactions?: VisualInteractionOptions;
   }
   export interface FunnelChartDataLabelOptions {
     /**
@@ -9730,6 +9760,10 @@ declare namespace QuickSight {
      * The visual palette configuration of a GaugeChartVisual.
      */
     VisualPalette?: VisualPalette;
+    /**
+     * The general visual interactions setup for a visual.
+     */
+    Interactions?: VisualInteractionOptions;
   }
   export interface GaugeChartFieldWells {
     /**
@@ -9976,6 +10010,10 @@ declare namespace QuickSight {
      */
     PointStyleOptions?: GeospatialPointStyleOptions;
     VisualPalette?: VisualPalette;
+    /**
+     * The general visual interactions setup for a visual.
+     */
+    Interactions?: VisualInteractionOptions;
   }
   export interface GeospatialMapFieldWells {
     /**
@@ -10355,6 +10393,10 @@ declare namespace QuickSight {
      * The tooltip display setup of the visual.
      */
     Tooltip?: TooltipOptions;
+    /**
+     * The general visual interactions setup for a visual.
+     */
+    Interactions?: VisualInteractionOptions;
   }
   export type HeatMapDimensionFieldList = DimensionField[];
   export interface HeatMapFieldWells {
@@ -10469,6 +10511,10 @@ declare namespace QuickSight {
      * The visual palette configuration of a histogram.
      */
     VisualPalette?: VisualPalette;
+    /**
+     * The general visual interactions setup for a visual.
+     */
+    Interactions?: VisualInteractionOptions;
   }
   export interface HistogramFieldWells {
     /**
@@ -10631,6 +10677,10 @@ declare namespace QuickSight {
      * The custom narrative of the insight visual.
      */
     CustomNarrative?: CustomNarrativeOptions;
+    /**
+     * The general visual interactions setup for a visual.
+     */
+    Interactions?: VisualInteractionOptions;
   }
   export interface InsightVisual {
     /**
@@ -10846,6 +10896,10 @@ declare namespace QuickSight {
      * The options that determine the presentation of a KPI visual.
      */
     KPIOptions?: KPIOptions;
+    /**
+     * The general visual interactions setup for a visual.
+     */
+    Interactions?: VisualInteractionOptions;
   }
   export interface KPIFieldWells {
     /**
@@ -11141,6 +11195,10 @@ declare namespace QuickSight {
      * The visual palette configuration of a line chart.
      */
     VisualPalette?: VisualPalette;
+    /**
+     * The general visual interactions setup for a visual.
+     */
+    Interactions?: VisualInteractionOptions;
   }
   export interface LineChartDefaultSeriesSettings {
     /**
@@ -13412,6 +13470,10 @@ declare namespace QuickSight {
      * The contribution analysis (anomaly configuration) setup of the visual.
      */
     ContributionAnalysisDefaults?: ContributionAnalysisDefaultList;
+    /**
+     * The general visual interactions setup for a visual.
+     */
+    Interactions?: VisualInteractionOptions;
   }
   export interface PieChartFieldWells {
     /**
@@ -13553,6 +13615,10 @@ declare namespace QuickSight {
      * The paginated report options for a pivot table visual.
      */
     PaginatedReportOptions?: PivotTablePaginatedReportOptions;
+    /**
+     * The general visual interactions setup for a visual.
+     */
+    Interactions?: VisualInteractionOptions;
   }
   export interface PivotTableDataPathOption {
     /**
@@ -13994,6 +14060,10 @@ declare namespace QuickSight {
      * The axis behavior options of a radar chart.
      */
     AxesRangeScale?: RadarChartAxesRangeScale;
+    /**
+     * The general visual interactions setup for a visual.
+     */
+    Interactions?: VisualInteractionOptions;
   }
   export interface RadarChartFieldWells {
     /**
@@ -14744,6 +14814,10 @@ declare namespace QuickSight {
      * The data label configuration of a sankey diagram.
      */
     DataLabels?: DataLabelOptions;
+    /**
+     * The general visual interactions setup for a visual.
+     */
+    Interactions?: VisualInteractionOptions;
   }
   export interface SankeyDiagramFieldWells {
     /**
@@ -14850,6 +14924,10 @@ declare namespace QuickSight {
      * The palette (chart color) display setup of the visual.
      */
     VisualPalette?: VisualPalette;
+    /**
+     * The general visual interactions setup for a visual.
+     */
+    Interactions?: VisualInteractionOptions;
   }
   export interface ScatterPlotFieldWells {
     /**
@@ -16224,6 +16302,10 @@ declare namespace QuickSight {
      * A collection of inline visualizations to display within a chart.
      */
     TableInlineVisualizations?: TableInlineVisualizationList;
+    /**
+     * The general visual interactions setup for a visual.
+     */
+    Interactions?: VisualInteractionOptions;
   }
   export interface TableFieldCustomIconContent {
     /**
@@ -17739,6 +17821,10 @@ declare namespace QuickSight {
      * The tooltip display setup of the visual.
      */
     Tooltip?: TooltipOptions;
+    /**
+     * The general visual interactions setup for a visual.
+     */
+    Interactions?: VisualInteractionOptions;
   }
   export type TreeMapDimensionFieldList = DimensionField[];
   export interface TreeMapFieldWells {
@@ -18511,11 +18597,11 @@ declare namespace QuickSight {
      */
     FolderId: RestrictiveResourceId;
     /**
-     * The permissions that you want to grant on a resource.
+     * The permissions that you want to grant on a resource. Namespace ARNs are not supported Principal values for folder permissions.
      */
     GrantPermissions?: ResourcePermissionList;
     /**
-     * The permissions that you want to revoke from a resource.
+     * The permissions that you want to revoke from a resource. Namespace ARNs are not supported Principal values for folder permissions.
      */
     RevokePermissions?: ResourcePermissionList;
   }
@@ -19615,6 +19701,16 @@ declare namespace QuickSight {
   }
   export type VisualCustomActionOperationList = VisualCustomActionOperation[];
   export type VisualCustomActionTrigger = "DATA_POINT_CLICK"|"DATA_POINT_MENU"|string;
+  export interface VisualInteractionOptions {
+    /**
+     * The on-visual menu options for a visual.
+     */
+    VisualMenuOption?: VisualMenuOption;
+    /**
+     * The context menu options for a visual.
+     */
+    ContextMenuOption?: ContextMenuOption;
+  }
   export type VisualList = Visual[];
   export interface VisualMenuOption {
     /**
@@ -19673,6 +19769,12 @@ declare namespace QuickSight {
      */
     Breakdowns?: DimensionFieldList;
   }
+  export interface WaterfallChartColorConfiguration {
+    /**
+     * The color configuration for individual groups within a waterfall visual.
+     */
+    GroupColorConfiguration?: WaterfallChartGroupColorConfiguration;
+  }
   export interface WaterfallChartConfiguration {
     /**
      * The field well configuration of a waterfall visual.
@@ -19714,6 +19816,14 @@ declare namespace QuickSight {
      * The visual palette configuration of a waterfall visual.
      */
     VisualPalette?: VisualPalette;
+    /**
+     * The color configuration of a waterfall visual.
+     */
+    ColorConfiguration?: WaterfallChartColorConfiguration;
+    /**
+     * The general visual interactions setup for a visual.
+     */
+    Interactions?: VisualInteractionOptions;
   }
   export interface WaterfallChartFieldWells {
     /**
@@ -19721,6 +19831,20 @@ declare namespace QuickSight {
      */
     WaterfallChartAggregatedFieldWells?: WaterfallChartAggregatedFieldWells;
   }
+  export interface WaterfallChartGroupColorConfiguration {
+    /**
+     * Defines the color for the positive bars of a waterfall chart.
+     */
+    PositiveBarColor?: HexColor;
+    /**
+     * Defines the color for the negative bars of a waterfall chart.
+     */
+    NegativeBarColor?: HexColor;
+    /**
+     * Defines the color for the total bars of a waterfall chart.
+     */
+    TotalBarColor?: HexColor;
+  }
   export interface WaterfallChartOptions {
     /**
      * This option determines the total bar label of a waterfall visual.
@@ -19815,6 +19939,10 @@ declare namespace QuickSight {
      * The options for a word cloud visual.
      */
     WordCloudOptions?: WordCloudOptions;
+    /**
+     * The general visual interactions setup for a visual.
+     */
+    Interactions?: VisualInteractionOptions;
   }
   export type WordCloudCloudLayout = "FLUID"|"NORMAL"|string;
   export type WordCloudDimensionFieldList = DimensionField[];