cdk-lambda-subminute 2.0.368 → 2.0.369

package/node_modules/aws-sdk/clients/mediaconvert.d.ts

@@ -252,7 +252,7 @@ declare namespace MediaConvert {
      */
     Bitrate?: __integerMin6000Max1024000;
     /**
-     * Specify the AAC profile. For the widest player compatibility and where higher bitrates are acceptable: Keep the default profile, LC (AAC-LC) For improved audio performance at lower bitrates: Choose HEV1 or HEV2. HEV1 (AAC-HE v1) adds spectral band replication to improve speech audio at low bitrates. HEV2 (AAC-HE v2) adds parametric stereo, which optimizes for encoding stereo audio at very low bitrates.
+     * AAC Profile.
      */
     CodecProfile?: AacCodecProfile;
     /**
@@ -260,7 +260,7 @@ declare namespace MediaConvert {
      */
     CodingMode?: AacCodingMode;
     /**
-     * Specify the AAC rate control mode. For a constant bitrate: Choose CBR. Your AAC output bitrate will be equal to the value that you choose for Bitrate. For a variable bitrate: Choose VBR. Your AAC output bitrate will vary according to your audio content and the value that you choose for Bitrate quality.
+     * Rate Control Mode.
      */
     RateControlMode?: AacRateControlMode;
     /**
@@ -268,7 +268,7 @@ declare namespace MediaConvert {
      */
     RawFormat?: AacRawFormat;
     /**
-     * Specify the AAC sample rate in samples per second (Hz). Valid sample rates depend on the AAC profile and Coding mode that you select. For a list of supported sample rates, see: https://docs.aws.amazon.com/mediaconvert/latest/ug/aac-support.html
+     * Specify the Sample rate in Hz. Valid sample rates depend on the Profile and Coding mode that you select. The following list shows valid sample rates for each Profile and Coding mode. * LC Profile, Coding mode 1.0, 2.0, and Receiver Mix: 8000, 12000, 16000, 22050, 24000, 32000, 44100, 48000, 88200, 96000. * LC Profile, Coding mode 5.1: 32000, 44100, 48000, 96000. * HEV1 Profile, Coding mode 1.0 and Receiver Mix: 22050, 24000, 32000, 44100, 48000. * HEV1 Profile, Coding mode 2.0 and 5.1: 32000, 44100, 48000, 96000. * HEV2 Profile, Coding mode 2.0: 22050, 24000, 32000, 44100, 48000.
      */
     SampleRate?: __integerMin8000Max96000;
     /**
@@ -276,7 +276,7 @@ declare namespace MediaConvert {
      */
     Specification?: AacSpecification;
     /**
-     * Specify the quality of your variable bitrate (VBR) AAC audio. For a list of approximate VBR bitrates, see: https://docs.aws.amazon.com/mediaconvert/latest/ug/aac-support.html#aac_vbr
+     * VBR Quality Level - Only used if rate_control_mode is VBR.
      */
     VbrQuality?: AacVbrQuality;
   }
@@ -498,7 +498,7 @@ declare namespace MediaConvert {
     /**
      * Specify the language for this audio output track. The service puts this language code into your output audio track when you set Language code control to Use configured. The service also uses your specified custom language code when you set Language code control to Follow input, but your input file doesn't specify a language code. For all outputs, you can use an ISO 639-2 or ISO 639-3 code. For streaming outputs, you can also use any other code in the full RFC-5646 specification. Streaming outputs are those that are in one of the following output groups: CMAF, DASH ISO, Apple HLS, or Microsoft Smooth Streaming.
      */
-    CustomLanguageCode?: __stringPatternAZaZ23AZaZ;
+    CustomLanguageCode?: __stringPatternAZaZ23AZaZ09;
     /**
      * Indicates the language of the audio output track. The ISO 639 language specified in the 'Language Code' drop down will be used when 'Follow Input Language Code' is not selected or when 'Follow Input Language Code' is selected but there is no ISO 639 language code specified by the input.
      */
@@ -1361,7 +1361,6 @@ When you specify Version 1, you must also set ID3 metadata to Passthrough.
      */
     OutputMasteringLuminance?: __integerMin0Max2147483647;
   }
-  export type ColorConversion3DLUTSettings = ColorConversion3DLUTSetting[];
   export interface ColorCorrector {
     /**
      * Brightness level.
@@ -3688,7 +3687,7 @@ Within your job settings, all of your DVB-Sub settings must be identical.
     /**
      * Use 3D LUTs to specify custom color mapping behavior when you convert from one color space into another. You can include up to 8 different 3D LUTs.
      */
-    ColorConversion3DLUTSettings?: ColorConversion3DLUTSettings;
+    ColorConversion3DLUTSettings?: __listOfColorConversion3DLUTSetting;
     /**
      * Settings for Event Signaling And Messaging (ESAM). If you don't do ad insertion, you can ignore these settings.
      */
@@ -3802,7 +3801,7 @@ Within your job settings, all of your DVB-Sub settings must be identical.
     /**
      * Use 3D LUTs to specify custom color mapping behavior when you convert from one color space into another. You can include up to 8 different 3D LUTs.
      */
-    ColorConversion3DLUTSettings?: ColorConversion3DLUTSettings;
+    ColorConversion3DLUTSettings?: __listOfColorConversion3DLUTSetting;
     /**
      * Settings for Event Signaling And Messaging (ESAM). If you don't do ad insertion, you can ignore these settings.
      */
@@ -5271,6 +5270,14 @@ When you specify Version 1, you must also set ID3 metadata to Passthrough.
     Y?: __integerMin0Max2147483647;
   }
   export interface RemixSettings {
+    /**
+     * Optionally specify the channel in your input that contains your audio description audio signal. MediaConvert mixes your audio signal across all output channels, while reducing their volume according to your data stream. When you specify an audio description audio channel, you must also specify an audio description data channel. For more information about audio description signals, see the BBC WHP 198 and 051 white papers.
+     */
+    AudioDescriptionAudioChannel?: __integerMin1Max64;
+    /**
+     * Optionally specify the channel in your input that contains your audio description data stream. MediaConvert mixes your audio signal across all output channels, while reducing their volume according to your data stream. When you specify an audio description data channel, you must also specify an audio description audio channel. For more information about audio description signals, see the BBC WHP 198 and 051 white papers.
+     */
+    AudioDescriptionDataChannel?: __integerMin1Max64;
     /**
      * Channel mapping contains the group of fields that hold the remixing value for each channel, in dB. Specify remix values to indicate how much of the content from your input audio channel you want in your output audio channels. Each instance of the InputChannels or InputChannelsFineTune array specifies these values for one output channel. Use one instance of this array for each output channel. In the console, each array corresponds to a column in the graphical depiction of the mapping matrix. The rows of the graphical matrix correspond to input channels. Valid values are within the range from -60 (mute) through 6. A setting of 0 passes the input channel unchanged to the output channel (no attenuation or amplification). Use InputChannels or InputChannelsFineTune to specify your remix values. Don't use both.
      */
@@ -6483,6 +6490,7 @@ When you specify Version 1, you must also set ID3 metadata to Passthrough.
   export type __listOfCaptionDescription = CaptionDescription[];
   export type __listOfCaptionDescriptionPreset = CaptionDescriptionPreset[];
   export type __listOfCmafAdditionalManifest = CmafAdditionalManifest[];
+  export type __listOfColorConversion3DLUTSetting = ColorConversion3DLUTSetting[];
   export type __listOfDashAdditionalManifest = DashAdditionalManifest[];
   export type __listOfEndpoint = Endpoint[];
   export type __listOfForceIncludeRenditionSize = ForceIncludeRenditionSize[];
@@ -6557,6 +6565,7 @@ When you specify Version 1, you must also set ID3 metadata to Passthrough.
   export type __stringPatternAZaZ0902 = string;
   export type __stringPatternAZaZ0932 = string;
   export type __stringPatternAZaZ23AZaZ = string;
+  export type __stringPatternAZaZ23AZaZ09 = string;
   export type __stringPatternArnAwsUsGovAcm = string;
   export type __stringPatternArnAwsUsGovCnKmsAZ26EastWestCentralNorthSouthEastWest1912D12KeyAFAF098AFAF094AFAF094AFAF094AFAF0912MrkAFAF0932 = string;
   export type __stringPatternDD = string;

package/node_modules/aws-sdk/clients/opensearch.d.ts

@@ -51,6 +51,14 @@ declare class OpenSearch extends Service {
    * Provides access to an Amazon OpenSearch Service domain through the use of an interface VPC endpoint.
    */
   authorizeVpcEndpointAccess(callback?: (err: AWSError, data: OpenSearch.Types.AuthorizeVpcEndpointAccessResponse) => void): Request<OpenSearch.Types.AuthorizeVpcEndpointAccessResponse, AWSError>;
+  /**
+   * Cancels a pending configuration change on an Amazon OpenSearch Service domain.
+   */
+  cancelDomainConfigChange(params: OpenSearch.Types.CancelDomainConfigChangeRequest, callback?: (err: AWSError, data: OpenSearch.Types.CancelDomainConfigChangeResponse) => void): Request<OpenSearch.Types.CancelDomainConfigChangeResponse, AWSError>;
+  /**
+   * Cancels a pending configuration change on an Amazon OpenSearch Service domain.
+   */
+  cancelDomainConfigChange(callback?: (err: AWSError, data: OpenSearch.Types.CancelDomainConfigChangeResponse) => void): Request<OpenSearch.Types.CancelDomainConfigChangeResponse, AWSError>;
   /**
    * Cancels a scheduled service software update for an Amazon OpenSearch Service domain. You can only perform this operation before the AutomatedUpdateDate and when the domain's UpdateStatus is PENDING_UPDATE. For more information, see Service software updates in Amazon OpenSearch Service.
    */
@@ -852,6 +860,27 @@ declare namespace OpenSearch {
   export type AvailabilityZoneList = AvailabilityZone[];
   export type BackendRole = string;
   export type Boolean = boolean;
+  export interface CancelDomainConfigChangeRequest {
+    DomainName: DomainName;
+    /**
+     * When set to True, returns the list of change IDs and properties that will be cancelled without actually cancelling the change.
+     */
+    DryRun?: DryRun;
+  }
+  export interface CancelDomainConfigChangeResponse {
+    /**
+     * The unique identifiers of the changes that were cancelled.
+     */
+    CancelledChangeIds?: GUIDList;
+    /**
+     * The domain change properties that were cancelled.
+     */
+    CancelledChangeProperties?: CancelledChangePropertyList;
+    /**
+     * Whether or not the request was a dry run. If True, the changes were not actually cancelled. 
+     */
+    DryRun?: DryRun;
+  }
   export interface CancelServiceSoftwareUpdateRequest {
     /**
      * Name of the OpenSearch Service domain that you want to cancel the service software update on.
@@ -864,6 +893,21 @@ declare namespace OpenSearch {
      */
     ServiceSoftwareOptions?: ServiceSoftwareOptions;
   }
+  export interface CancelledChangeProperty {
+    /**
+     * The name of the property whose change was cancelled.
+     */
+    PropertyName?: String;
+    /**
+     * The pending value of the property that was cancelled. This would have been the eventual value of the property if the chance had not been cancelled.
+     */
+    CancelledValue?: String;
+    /**
+     * The current value of the property, after the change was cancelled.
+     */
+    ActiveValue?: String;
+  }
+  export type CancelledChangePropertyList = CancelledChangeProperty[];
   export interface ChangeProgressDetails {
     /**
      * The ID of the configuration change.
@@ -873,6 +917,22 @@ declare namespace OpenSearch {
      * A message corresponding to the status of the configuration change.
      */
     Message?: Message;
+    /**
+     * The current status of the configuration change.
+     */
+    ConfigChangeStatus?: ConfigChangeStatus;
+    /**
+     * The IAM principal who initiated the configuration change.
+     */
+    InitiatedBy?: InitiatedBy;
+    /**
+     * The time that the configuration change was initiated, in Universal Coordinated Time (UTC).
+     */
+    StartTime?: UpdateTimestamp;
+    /**
+     * The last time that the configuration change was updated.
+     */
+    LastUpdatedTime?: UpdateTimestamp;
   }
   export interface ChangeProgressStage {
     /**
@@ -924,6 +984,18 @@ declare namespace OpenSearch {
      * The specific stages that the domain is going through to perform the configuration change.
      */
     ChangeProgressStages?: ChangeProgressStageList;
+    /**
+     * The last time that the status of the configuration change was updated.
+     */
+    LastUpdatedTime?: UpdateTimestamp;
+    /**
+     * The current status of the configuration change.
+     */
+    ConfigChangeStatus?: ConfigChangeStatus;
+    /**
+     * The IAM principal who initiated the configuration change.
+     */
+    InitiatedBy?: InitiatedBy;
   }
   export type ClientToken = string;
   export type CloudWatchLogsLogGroupArn = string;
@@ -1033,6 +1105,7 @@ declare namespace OpenSearch {
      */
     TargetVersions?: VersionList;
   }
+  export type ConfigChangeStatus = "Pending"|"Initializing"|"Validating"|"ValidationFailed"|"ApplyingChanges"|"Completed"|"PendingUserInput"|"Cancelled"|string;
   export type ConnectionAlias = string;
   export type ConnectionId = string;
   export type ConnectionMode = "DIRECT"|"VPC_ENDPOINT"|string;
@@ -1774,6 +1847,10 @@ declare namespace OpenSearch {
      * Software update options for the domain.
      */
     SoftwareUpdateOptions?: SoftwareUpdateOptionsStatus;
+    /**
+     * Information about the domain properties that are currently being modified.
+     */
+    ModifyingProperties?: ModifyingPropertiesList;
   }
   export interface DomainEndpointOptions {
     /**
@@ -1939,6 +2016,7 @@ declare namespace OpenSearch {
   }
   export type DomainPackageDetailsList = DomainPackageDetails[];
   export type DomainPackageStatus = "ASSOCIATING"|"ASSOCIATION_FAILED"|"ACTIVE"|"DISSOCIATING"|"DISSOCIATION_FAILED"|string;
+  export type DomainProcessingStatusType = "Creating"|"Active"|"Modifying"|"UpgradingEngineVersion"|"UpdatingServiceSoftware"|"Isolated"|"Deleting"|string;
   export type DomainState = "Active"|"Processing"|"NotAvailable"|string;
   export interface DomainStatus {
     /**
@@ -2057,6 +2135,14 @@ declare namespace OpenSearch {
      * Service software update options for the domain.
      */
     SoftwareUpdateOptions?: SoftwareUpdateOptions;
+    /**
+     * The status of any changes that are currently in progress for the domain.
+     */
+    DomainProcessingStatus?: DomainProcessingStatusType;
+    /**
+     * Information about the domain properties that are currently being modified.
+     */
+    ModifyingProperties?: ModifyingPropertiesList;
   }
   export type DomainStatusList = DomainStatus[];
   export type Double = number;
@@ -2192,6 +2278,7 @@ declare namespace OpenSearch {
   }
   export type FilterList = Filter[];
   export type GUID = string;
+  export type GUIDList = GUID[];
   export interface GetCompatibleVersionsRequest {
     /**
      * The name of an existing domain. Provide this parameter to limit the results to a single domain.
@@ -2379,6 +2466,7 @@ declare namespace OpenSearch {
   }
   export type InboundConnectionStatusCode = "PENDING_ACCEPTANCE"|"APPROVED"|"PROVISIONING"|"ACTIVE"|"REJECTING"|"REJECTED"|"DELETING"|"DELETED"|string;
   export type InboundConnections = InboundConnection[];
+  export type InitiatedBy = "CUSTOMER"|"SERVICE"|string;
   export type InstanceCount = number;
   export interface InstanceCountLimits {
     /**
@@ -2755,6 +2843,25 @@ declare namespace OpenSearch {
   export type MaximumInstanceCount = number;
   export type Message = string;
   export type MinimumInstanceCount = number;
+  export interface ModifyingProperties {
+    /**
+     * The name of the property that is currently being modified.
+     */
+    Name?: String;
+    /**
+     * The current value of the domain property that is being modified.
+     */
+    ActiveValue?: String;
+    /**
+     * The value that the property that is currently being modified will eventually have.
+     */
+    PendingValue?: String;
+    /**
+     * The type of value that is currently being modified. Properties can have two types:    PLAIN_TEXT: Contain direct values such as "1", "True", or "c5.large.search".    STRINGIFIED_JSON: Contain content in JSON format, such as {"Enabled":"True"}".  
+     */
+    ValueType?: PropertyValueType;
+  }
+  export type ModifyingPropertiesList = ModifyingProperties[];
   export type NextToken = string;
   export type NodeId = string;
   export type NodeStatus = "Active"|"StandBy"|"NotAvailable"|string;
@@ -2985,6 +3092,7 @@ declare namespace OpenSearch {
   export type PluginVersion = string;
   export type PolicyDocument = string;
   export type PrincipalType = "AWS_ACCOUNT"|"AWS_SERVICE"|string;
+  export type PropertyValueType = "PLAIN_TEXT"|"STRINGIFIED_JSON"|string;
   export interface PurchaseReservedInstanceOfferingRequest {
     /**
      * The ID of the Reserved Instance offering to purchase.

package/node_modules/aws-sdk/clients/redshift.d.ts

@@ -800,6 +800,14 @@ declare class Redshift extends Service {
    * Get the resource policy for a specified resource.
    */
   getResourcePolicy(callback?: (err: AWSError, data: Redshift.Types.GetResourcePolicyResult) => void): Request<Redshift.Types.GetResourcePolicyResult, AWSError>;
+  /**
+   * List the Amazon Redshift Advisor recommendations for one or multiple Amazon Redshift clusters in an Amazon Web Services account.
+   */
+  listRecommendations(params: Redshift.Types.ListRecommendationsMessage, callback?: (err: AWSError, data: Redshift.Types.ListRecommendationsResult) => void): Request<Redshift.Types.ListRecommendationsResult, AWSError>;
+  /**
+   * List the Amazon Redshift Advisor recommendations for one or multiple Amazon Redshift clusters in an Amazon Web Services account.
+   */
+  listRecommendations(callback?: (err: AWSError, data: Redshift.Types.ListRecommendationsResult) => void): Request<Redshift.Types.ListRecommendationsResult, AWSError>;
   /**
    * This operation is retired. Calling this operation does not change AQUA configuration. Amazon Redshift automatically determines whether to use AQUA (Advanced Query Accelerator). 
    */
@@ -4200,6 +4208,7 @@ declare namespace Redshift {
   export type IamRoleArnList = String[];
   export type IdcDisplayNameString = string;
   export type IdentityNamespaceString = string;
+  export type ImpactRankingType = "HIGH"|"MEDIUM"|"LOW"|string;
   export type ImportTablesCompleted = String[];
   export type ImportTablesInProgress = String[];
   export type ImportTablesNotStarted = String[];
@@ -4266,6 +4275,34 @@ declare namespace Redshift {
     LakeFormationQuery?: LakeFormationQuery;
   }
   export type LakeFormationServiceIntegrations = LakeFormationScopeUnion[];
+  export interface ListRecommendationsMessage {
+    /**
+     * The unique identifier of the Amazon Redshift cluster for which the list of Advisor recommendations is returned. If the neither the cluster identifier and the cluster namespace ARN parameters are specified, then recommendations for all clusters in the account are returned.
+     */
+    ClusterIdentifier?: String;
+    /**
+     * The Amazon Redshift cluster namespace Amazon Resource Name (ARN) for which the list of Advisor recommendations is returned. If the neither the cluster identifier and the cluster namespace ARN parameters are specified, then recommendations for all clusters in the account are returned.
+     */
+    NamespaceArn?: String;
+    /**
+     * The maximum number of response records to return in each call. If the number of remaining response records exceeds the specified MaxRecords value, a value is returned in a marker field of the response. You can retrieve the next set of records by retrying the command with the returned marker value.
+     */
+    MaxRecords?: IntegerOptional;
+    /**
+     * A value that indicates the starting point for the next set of response records in a subsequent request. If a value is returned in a response, you can retrieve the next set of records by providing this returned marker value in the Marker parameter and retrying the command. If the Marker field is empty, all response records have been retrieved for the request. 
+     */
+    Marker?: String;
+  }
+  export interface ListRecommendationsResult {
+    /**
+     * The Advisor recommendations for action on the Amazon Redshift cluster.
+     */
+    Recommendations?: RecommendationList;
+    /**
+     * A value that indicates the starting point for the next set of response records in a subsequent request. If a value is returned in a response, you can retrieve the next set of records by providing this returned marker value in the Marker parameter and retrying the command. If the Marker field is empty, all response records have been retrieved for the request. 
+     */
+    Marker?: String;
+  }
   export type LogDestinationType = "s3"|"cloudwatch"|string;
   export type LogTypeList = String[];
   export interface LoggingStatus {
@@ -5070,6 +5107,77 @@ declare namespace Redshift {
   export interface RebootClusterResult {
     Cluster?: Cluster;
   }
+  export interface Recommendation {
+    /**
+     * A unique identifier of the Advisor recommendation.
+     */
+    Id?: String;
+    /**
+     * The unique identifier of the cluster for which the recommendation is returned.
+     */
+    ClusterIdentifier?: String;
+    /**
+     * The Amazon Redshift cluster namespace ARN for which the recommendations is returned.
+     */
+    NamespaceArn?: String;
+    /**
+     * The date and time (UTC) that the recommendation was created.
+     */
+    CreatedAt?: TStamp;
+    /**
+     * The type of Advisor recommendation.
+     */
+    RecommendationType?: String;
+    /**
+     * The title of the recommendation.
+     */
+    Title?: String;
+    /**
+     * The description of the recommendation.
+     */
+    Description?: String;
+    /**
+     * The description of what was observed about your cluster.
+     */
+    Observation?: String;
+    /**
+     * The scale of the impact that the Advisor recommendation has to the performance and cost of the cluster.
+     */
+    ImpactRanking?: ImpactRankingType;
+    /**
+     * The description of the recommendation.
+     */
+    RecommendationText?: String;
+    /**
+     * List of Amazon Redshift recommended actions.
+     */
+    RecommendedActions?: RecommendedActionList;
+    /**
+     * List of helpful links for more information about the Advisor recommendation.
+     */
+    ReferenceLinks?: ReferenceLinkList;
+  }
+  export type RecommendationList = Recommendation[];
+  export interface RecommendedAction {
+    /**
+     * The specific instruction about the command.
+     */
+    Text?: String;
+    /**
+     * The database name to perform the action on. Only applicable if the type of command is SQL.
+     */
+    Database?: String;
+    /**
+     * The command to run.
+     */
+    Command?: String;
+    /**
+     * The type of command.
+     */
+    Type?: RecommendedActionType;
+  }
+  export type RecommendedActionList = RecommendedAction[];
+  export type RecommendedActionType = "SQL"|"CLI"|string;
   export interface RecurringCharge {
     /**
      * The amount charged per the period of time specified by the recurring charge frequency.
@@ -5125,6 +5233,17 @@ declare namespace Redshift {
   }
   export type RedshiftIdcApplicationList = RedshiftIdcApplication[];
   export type RedshiftIdcApplicationName = string;
+  export interface ReferenceLink {
+    /**
+     * The hyperlink text that describes the link to more information.
+     */
+    Text?: String;
+    /**
+     * The URL address to find more information.
+     */
+    Link?: String;
+  }
+  export type ReferenceLinkList = ReferenceLink[];
   export interface RejectDataShareMessage {
     /**
      * The Amazon Resource Name (ARN) of the datashare to reject.