cdk-lambda-subminute 2.0.245 → 2.0.246

package/node_modules/aws-sdk/clients/efs.d.ts

@@ -36,11 +36,11 @@ declare class EFS extends Service {
    */
   createMountTarget(callback?: (err: AWSError, data: EFS.Types.MountTargetDescription) => void): Request<EFS.Types.MountTargetDescription, AWSError>;
   /**
-   * Creates a replication configuration that replicates an existing EFS file system to a new, read-only file system. For more information, see Amazon EFS replication in the Amazon EFS User Guide. The replication configuration specifies the following:    Source file system - An existing EFS file system that you want replicated. The source file system cannot be a destination file system in an existing replication configuration.    Destination file system configuration - The configuration of the destination file system to which the source file system will be replicated. There can only be one destination file system in a replication configuration. The destination file system configuration consists of the following properties:    Amazon Web Services Region - The Amazon Web Services Region in which the destination file system is created. Amazon EFS replication is available in all Amazon Web Services Regions that Amazon EFS is available in, except Africa (Cape Town), Asia Pacific (Hong Kong), Asia Pacific (Jakarta), Europe (Milan), and Middle East (Bahrain).    Availability Zone - If you want the destination file system to use EFS One Zone availability and durability, you must specify the Availability Zone to create the file system in. For more information about EFS storage classes, see  Amazon EFS storage classes in the Amazon EFS User Guide.    Encryption - All destination file systems are created with encryption at rest enabled. You can specify the Key Management Service (KMS) key that is used to encrypt the destination file system. If you don't specify a KMS key, your service-managed KMS key for Amazon EFS is used.   After the file system is created, you cannot change the KMS key.      The following properties are set by default:    Performance mode - The destination file system's performance mode matches that of the source file system, unless the destination file system uses EFS One Zone storage. In that case, the General Purpose performance mode is used. The performance mode cannot be changed.    Throughput mode - The destination file system's throughput mode matches that of the source file system. After the file system is created, you can modify the throughput mode.   The following properties are turned off by default:    Lifecycle management - EFS lifecycle management and EFS Intelligent-Tiering are not enabled on the destination file system. After the destination file system is created, you can enable EFS lifecycle management and EFS Intelligent-Tiering.    Automatic backups - Automatic daily backups not enabled on the destination file system. After the file system is created, you can change this setting.   For more information, see Amazon EFS replication in the Amazon EFS User Guide.
+   * Creates a replication configuration that replicates an existing EFS file system to a new, read-only file system. For more information, see Amazon EFS replication in the Amazon EFS User Guide. The replication configuration specifies the following:    Source file system - An existing EFS file system that you want replicated. The source file system cannot be a destination file system in an existing replication configuration.    Destination file system configuration - The configuration of the destination file system to which the source file system will be replicated. There can only be one destination file system in a replication configuration. The destination file system configuration consists of the following properties:    Amazon Web Services Region - The Amazon Web Services Region in which the destination file system is created. Amazon EFS replication is available in all Amazon Web Services Regions in which EFS is available. To use EFS replication in a Region that is disabled by default, you must first opt in to the Region. For more information, see Managing Amazon Web Services Regions in the Amazon Web Services General Reference Reference Guide     Availability Zone - If you want the destination file system to use EFS One Zone availability and durability, you must specify the Availability Zone to create the file system in. For more information about EFS storage classes, see  Amazon EFS storage classes in the Amazon EFS User Guide.    Encryption - All destination file systems are created with encryption at rest enabled. You can specify the Key Management Service (KMS) key that is used to encrypt the destination file system. If you don't specify a KMS key, your service-managed KMS key for Amazon EFS is used.   After the file system is created, you cannot change the KMS key.      The following properties are set by default:    Performance mode - The destination file system's performance mode matches that of the source file system, unless the destination file system uses EFS One Zone storage. In that case, the General Purpose performance mode is used. The performance mode cannot be changed.    Throughput mode - The destination file system's throughput mode matches that of the source file system. After the file system is created, you can modify the throughput mode.   The following properties are turned off by default:    Lifecycle management - EFS lifecycle management and EFS Intelligent-Tiering are not enabled on the destination file system. After the destination file system is created, you can enable EFS lifecycle management and EFS Intelligent-Tiering.    Automatic backups - Automatic daily backups are enabled on the destination file system. After the file system is created, you can change this setting.   For more information, see Amazon EFS replication in the Amazon EFS User Guide.
    */
   createReplicationConfiguration(params: EFS.Types.CreateReplicationConfigurationRequest, callback?: (err: AWSError, data: EFS.Types.ReplicationConfigurationDescription) => void): Request<EFS.Types.ReplicationConfigurationDescription, AWSError>;
   /**
-   * Creates a replication configuration that replicates an existing EFS file system to a new, read-only file system. For more information, see Amazon EFS replication in the Amazon EFS User Guide. The replication configuration specifies the following:    Source file system - An existing EFS file system that you want replicated. The source file system cannot be a destination file system in an existing replication configuration.    Destination file system configuration - The configuration of the destination file system to which the source file system will be replicated. There can only be one destination file system in a replication configuration. The destination file system configuration consists of the following properties:    Amazon Web Services Region - The Amazon Web Services Region in which the destination file system is created. Amazon EFS replication is available in all Amazon Web Services Regions that Amazon EFS is available in, except Africa (Cape Town), Asia Pacific (Hong Kong), Asia Pacific (Jakarta), Europe (Milan), and Middle East (Bahrain).    Availability Zone - If you want the destination file system to use EFS One Zone availability and durability, you must specify the Availability Zone to create the file system in. For more information about EFS storage classes, see  Amazon EFS storage classes in the Amazon EFS User Guide.    Encryption - All destination file systems are created with encryption at rest enabled. You can specify the Key Management Service (KMS) key that is used to encrypt the destination file system. If you don't specify a KMS key, your service-managed KMS key for Amazon EFS is used.   After the file system is created, you cannot change the KMS key.      The following properties are set by default:    Performance mode - The destination file system's performance mode matches that of the source file system, unless the destination file system uses EFS One Zone storage. In that case, the General Purpose performance mode is used. The performance mode cannot be changed.    Throughput mode - The destination file system's throughput mode matches that of the source file system. After the file system is created, you can modify the throughput mode.   The following properties are turned off by default:    Lifecycle management - EFS lifecycle management and EFS Intelligent-Tiering are not enabled on the destination file system. After the destination file system is created, you can enable EFS lifecycle management and EFS Intelligent-Tiering.    Automatic backups - Automatic daily backups not enabled on the destination file system. After the file system is created, you can change this setting.   For more information, see Amazon EFS replication in the Amazon EFS User Guide.
+   * Creates a replication configuration that replicates an existing EFS file system to a new, read-only file system. For more information, see Amazon EFS replication in the Amazon EFS User Guide. The replication configuration specifies the following:    Source file system - An existing EFS file system that you want replicated. The source file system cannot be a destination file system in an existing replication configuration.    Destination file system configuration - The configuration of the destination file system to which the source file system will be replicated. There can only be one destination file system in a replication configuration. The destination file system configuration consists of the following properties:    Amazon Web Services Region - The Amazon Web Services Region in which the destination file system is created. Amazon EFS replication is available in all Amazon Web Services Regions in which EFS is available. To use EFS replication in a Region that is disabled by default, you must first opt in to the Region. For more information, see Managing Amazon Web Services Regions in the Amazon Web Services General Reference Reference Guide     Availability Zone - If you want the destination file system to use EFS One Zone availability and durability, you must specify the Availability Zone to create the file system in. For more information about EFS storage classes, see  Amazon EFS storage classes in the Amazon EFS User Guide.    Encryption - All destination file systems are created with encryption at rest enabled. You can specify the Key Management Service (KMS) key that is used to encrypt the destination file system. If you don't specify a KMS key, your service-managed KMS key for Amazon EFS is used.   After the file system is created, you cannot change the KMS key.      The following properties are set by default:    Performance mode - The destination file system's performance mode matches that of the source file system, unless the destination file system uses EFS One Zone storage. In that case, the General Purpose performance mode is used. The performance mode cannot be changed.    Throughput mode - The destination file system's throughput mode matches that of the source file system. After the file system is created, you can modify the throughput mode.   The following properties are turned off by default:    Lifecycle management - EFS lifecycle management and EFS Intelligent-Tiering are not enabled on the destination file system. After the destination file system is created, you can enable EFS lifecycle management and EFS Intelligent-Tiering.    Automatic backups - Automatic daily backups are enabled on the destination file system. After the file system is created, you can change this setting.   For more information, see Amazon EFS replication in the Amazon EFS User Guide.
    */
   createReplicationConfiguration(callback?: (err: AWSError, data: EFS.Types.ReplicationConfigurationDescription) => void): Request<EFS.Types.ReplicationConfigurationDescription, AWSError>;
   /**
@@ -84,11 +84,11 @@ declare class EFS extends Service {
    */
   deleteMountTarget(callback?: (err: AWSError, data: {}) => void): Request<{}, AWSError>;
   /**
-   * Deletes an existing replication configuration. To delete a replication configuration, you must make the request from the Amazon Web Services Region in which the destination file system is located. Deleting a replication configuration ends the replication process. After a replication configuration is deleted, the destination file system is no longer read-only. You can write to the destination file system after its status becomes Writeable.
+   * Deletes an existing replication configuration. Deleting a replication configuration ends the replication process. After a replication configuration is deleted, the destination file system is no longer read-only. You can write to the destination file system after its status becomes Writeable.
    */
   deleteReplicationConfiguration(params: EFS.Types.DeleteReplicationConfigurationRequest, callback?: (err: AWSError, data: {}) => void): Request<{}, AWSError>;
   /**
-   * Deletes an existing replication configuration. To delete a replication configuration, you must make the request from the Amazon Web Services Region in which the destination file system is located. Deleting a replication configuration ends the replication process. After a replication configuration is deleted, the destination file system is no longer read-only. You can write to the destination file system after its status becomes Writeable.
+   * Deletes an existing replication configuration. Deleting a replication configuration ends the replication process. After a replication configuration is deleted, the destination file system is no longer read-only. You can write to the destination file system after its status becomes Writeable.
    */
   deleteReplicationConfiguration(callback?: (err: AWSError, data: {}) => void): Request<{}, AWSError>;
   /**
@@ -108,11 +108,11 @@ declare class EFS extends Service {
    */
   describeAccessPoints(callback?: (err: AWSError, data: EFS.Types.DescribeAccessPointsResponse) => void): Request<EFS.Types.DescribeAccessPointsResponse, AWSError>;
   /**
-   * Returns the account preferences settings for the Amazon Web Services account associated with the user making the request, in the current Amazon Web Services Region. For more information, see Managing Amazon EFS resource IDs.
+   * Returns the account preferences settings for the Amazon Web Services account associated with the user making the request, in the current Amazon Web Services Region.
    */
   describeAccountPreferences(params: EFS.Types.DescribeAccountPreferencesRequest, callback?: (err: AWSError, data: EFS.Types.DescribeAccountPreferencesResponse) => void): Request<EFS.Types.DescribeAccountPreferencesResponse, AWSError>;
   /**
-   * Returns the account preferences settings for the Amazon Web Services account associated with the user making the request, in the current Amazon Web Services Region. For more information, see Managing Amazon EFS resource IDs.
+   * Returns the account preferences settings for the Amazon Web Services account associated with the user making the request, in the current Amazon Web Services Region.
    */
   describeAccountPreferences(callback?: (err: AWSError, data: EFS.Types.DescribeAccountPreferencesResponse) => void): Request<EFS.Types.DescribeAccountPreferencesResponse, AWSError>;
   /**
@@ -344,7 +344,7 @@ declare namespace EFS {
      */
     CreationToken: CreationToken;
     /**
-     * The performance mode of the file system. We recommend generalPurpose performance mode for most file systems. File systems using the maxIO performance mode can scale to higher levels of aggregate throughput and operations per second with a tradeoff of slightly higher latencies for most file operations. The performance mode can't be changed after the file system has been created.  The maxIO mode is not supported on file systems using One Zone storage classes. 
+     * The performance mode of the file system. We recommend generalPurpose performance mode for most file systems. File systems using the maxIO performance mode can scale to higher levels of aggregate throughput and operations per second with a tradeoff of slightly higher latencies for most file operations. The performance mode can't be changed after the file system has been created.  The maxIO mode is not supported on file systems using One Zone storage classes.  Default is generalPurpose.
      */
     PerformanceMode?: PerformanceMode;
     /**
@@ -360,7 +360,7 @@ declare namespace EFS {
      */
     ThroughputMode?: ThroughputMode;
     /**
-     * The throughput, measured in MiB/s, that you want to provision for a file system that you're creating. Valid values are 1-1024. Required if ThroughputMode is set to provisioned. The upper limit for throughput is 1024 MiB/s. To increase this limit, contact Amazon Web Services Support. For more information, see Amazon EFS quotas that you can increase in the Amazon EFS User Guide.
+     * The throughput, measured in mebibytes per second (MiBps), that you want to provision for a file system that you're creating. Required if ThroughputMode is set to provisioned. Valid values are 1-3414 MiBps, with the upper limit depending on Region. To increase this limit, contact Amazon Web Services Support. For more information, see Amazon EFS quotas that you can increase in the Amazon EFS User Guide.
      */
     ProvisionedThroughputInMibps?: ProvisionedThroughputInMibps;
     /**
@@ -757,7 +757,7 @@ declare namespace EFS {
      */
     ThroughputMode?: ThroughputMode;
     /**
-     * The amount of provisioned throughput, measured in MiB/s, for the file system. Valid for file systems using ThroughputMode set to provisioned.
+     * The amount of provisioned throughput, measured in MiBps, for the file system. Valid for file systems using ThroughputMode set to provisioned.
      */
     ProvisionedThroughputInMibps?: ProvisionedThroughputInMibps;
     /**
@@ -1082,7 +1082,7 @@ declare namespace EFS {
      */
     ThroughputMode?: ThroughputMode;
     /**
-     * (Optional) Sets the amount of provisioned throughput, in MiB/s, for the file system. Valid values are 1-1024. If you are changing the throughput mode to provisioned, you must also provide the amount of provisioned throughput. Required if ThroughputMode is changed to provisioned on update.
+     * (Optional) The throughput, measured in mebibytes per second (MiBps), that you want to provision for a file system that you're creating. Required if ThroughputMode is set to provisioned. Valid values are 1-3414 MiBps, with the upper limit depending on Region. To increase this limit, contact Amazon Web Services Support. For more information, see Amazon EFS quotas that you can increase in the Amazon EFS User Guide.
      */
     ProvisionedThroughputInMibps?: ProvisionedThroughputInMibps;
   }

package/node_modules/aws-sdk/clients/guardduty.d.ts

@@ -340,11 +340,11 @@ declare class GuardDuty extends Service {
    */
   getUsageStatistics(callback?: (err: AWSError, data: GuardDuty.Types.GetUsageStatisticsResponse) => void): Request<GuardDuty.Types.GetUsageStatisticsResponse, AWSError>;
   /**
-   * Invites Amazon Web Services accounts to become members of an organization administered by the Amazon Web Services account that invokes this API. If you are using organizations to manager your GuardDuty environment, this step is not needed. For more information, see Managing accounts with organizations. To invite Amazon Web Services accounts, the first step is to ensure that GuardDuty has been enabled in the potential member accounts. You can now invoke this API to add accounts by invitation. The invited accounts can either accept or decline the invitation from their GuardDuty accounts. Each invited Amazon Web Services account can choose to accept the invitation from only one Amazon Web Services account. For more information, see Managing GuardDuty accounts by invitation. After the invite has been accepted and you choose to disassociate a member account (by using DisassociateMembers) from your account, the details of the member account obtained by invoking CreateMembers, including the associated email addresses, will be retained. This is done so that you can invoke InviteMembers without the need to invoke CreateMembers again. To remove the details associated with a member account, you must also invoke DeleteMembers. 
+   * Invites Amazon Web Services accounts to become members of an organization administered by the Amazon Web Services account that invokes this API. If you are using Amazon Web Services Organizations to manage your GuardDuty environment, this step is not needed. For more information, see Managing accounts with organizations. To invite Amazon Web Services accounts, the first step is to ensure that GuardDuty has been enabled in the potential member accounts. You can now invoke this API to add accounts by invitation. The invited accounts can either accept or decline the invitation from their GuardDuty accounts. Each invited Amazon Web Services account can choose to accept the invitation from only one Amazon Web Services account. For more information, see Managing GuardDuty accounts by invitation. After the invite has been accepted and you choose to disassociate a member account (by using DisassociateMembers) from your account, the details of the member account obtained by invoking CreateMembers, including the associated email addresses, will be retained. This is done so that you can invoke InviteMembers without the need to invoke CreateMembers again. To remove the details associated with a member account, you must also invoke DeleteMembers. 
    */
   inviteMembers(params: GuardDuty.Types.InviteMembersRequest, callback?: (err: AWSError, data: GuardDuty.Types.InviteMembersResponse) => void): Request<GuardDuty.Types.InviteMembersResponse, AWSError>;
   /**
-   * Invites Amazon Web Services accounts to become members of an organization administered by the Amazon Web Services account that invokes this API. If you are using organizations to manager your GuardDuty environment, this step is not needed. For more information, see Managing accounts with organizations. To invite Amazon Web Services accounts, the first step is to ensure that GuardDuty has been enabled in the potential member accounts. You can now invoke this API to add accounts by invitation. The invited accounts can either accept or decline the invitation from their GuardDuty accounts. Each invited Amazon Web Services account can choose to accept the invitation from only one Amazon Web Services account. For more information, see Managing GuardDuty accounts by invitation. After the invite has been accepted and you choose to disassociate a member account (by using DisassociateMembers) from your account, the details of the member account obtained by invoking CreateMembers, including the associated email addresses, will be retained. This is done so that you can invoke InviteMembers without the need to invoke CreateMembers again. To remove the details associated with a member account, you must also invoke DeleteMembers. 
+   * Invites Amazon Web Services accounts to become members of an organization administered by the Amazon Web Services account that invokes this API. If you are using Amazon Web Services Organizations to manage your GuardDuty environment, this step is not needed. For more information, see Managing accounts with organizations. To invite Amazon Web Services accounts, the first step is to ensure that GuardDuty has been enabled in the potential member accounts. You can now invoke this API to add accounts by invitation. The invited accounts can either accept or decline the invitation from their GuardDuty accounts. Each invited Amazon Web Services account can choose to accept the invitation from only one Amazon Web Services account. For more information, see Managing GuardDuty accounts by invitation. After the invite has been accepted and you choose to disassociate a member account (by using DisassociateMembers) from your account, the details of the member account obtained by invoking CreateMembers, including the associated email addresses, will be retained. This is done so that you can invoke InviteMembers without the need to invoke CreateMembers again. To remove the details associated with a member account, you must also invoke DeleteMembers. 
    */
   inviteMembers(callback?: (err: AWSError, data: GuardDuty.Types.InviteMembersResponse) => void): Request<GuardDuty.Types.InviteMembersResponse, AWSError>;
   /**
@@ -404,11 +404,11 @@ declare class GuardDuty extends Service {
    */
   listMembers(callback?: (err: AWSError, data: GuardDuty.Types.ListMembersResponse) => void): Request<GuardDuty.Types.ListMembersResponse, AWSError>;
   /**
-   * Lists the accounts configured as GuardDuty delegated administrators. Only the organization's management account can run this API operation.
+   * Lists the accounts designated as GuardDuty delegated administrators. Only the organization's management account can run this API operation.
    */
   listOrganizationAdminAccounts(params: GuardDuty.Types.ListOrganizationAdminAccountsRequest, callback?: (err: AWSError, data: GuardDuty.Types.ListOrganizationAdminAccountsResponse) => void): Request<GuardDuty.Types.ListOrganizationAdminAccountsResponse, AWSError>;
   /**
-   * Lists the accounts configured as GuardDuty delegated administrators. Only the organization's management account can run this API operation.
+   * Lists the accounts designated as GuardDuty delegated administrators. Only the organization's management account can run this API operation.
    */
   listOrganizationAdminAccounts(callback?: (err: AWSError, data: GuardDuty.Types.ListOrganizationAdminAccountsResponse) => void): Request<GuardDuty.Types.ListOrganizationAdminAccountsResponse, AWSError>;
   /**
@@ -963,7 +963,7 @@ declare namespace GuardDuty {
   }
   export interface CoverageFilterCriterion {
     /**
-     * An enum value representing possible filter fields.
+     * An enum value representing possible filter fields.  Replace the enum value CLUSTER_NAME with EKS_CLUSTER_NAME. CLUSTER_NAME has been deprecated. 
      */
     CriterionKey?: CoverageFilterCriterionKey;
     /**
@@ -971,7 +971,7 @@ declare namespace GuardDuty {
      */
     FilterCondition?: CoverageFilterCondition;
   }
-  export type CoverageFilterCriterionKey = "ACCOUNT_ID"|"CLUSTER_NAME"|"RESOURCE_TYPE"|"COVERAGE_STATUS"|"ADDON_VERSION"|"MANAGEMENT_TYPE"|string;
+  export type CoverageFilterCriterionKey = "ACCOUNT_ID"|"CLUSTER_NAME"|"RESOURCE_TYPE"|"COVERAGE_STATUS"|"ADDON_VERSION"|"MANAGEMENT_TYPE"|"EKS_CLUSTER_NAME"|string;
   export type CoverageFilterCriterionList = CoverageFilterCriterion[];
   export interface CoverageResource {
     /**
@@ -1016,7 +1016,7 @@ declare namespace GuardDuty {
   export type CoverageResources = CoverageResource[];
   export interface CoverageSortCriteria {
     /**
-     * Represents the field name used to sort the coverage details.
+     * Represents the field name used to sort the coverage details.  Replace the enum value CLUSTER_NAME with EKS_CLUSTER_NAME. CLUSTER_NAME has been deprecated. 
      */
     AttributeName?: CoverageSortKey;
     /**
@@ -1024,7 +1024,7 @@ declare namespace GuardDuty {
      */
     OrderBy?: OrderBy;
   }
-  export type CoverageSortKey = "ACCOUNT_ID"|"CLUSTER_NAME"|"COVERAGE_STATUS"|"ISSUE"|"ADDON_VERSION"|"UPDATED_AT"|string;
+  export type CoverageSortKey = "ACCOUNT_ID"|"CLUSTER_NAME"|"COVERAGE_STATUS"|"ISSUE"|"ADDON_VERSION"|"UPDATED_AT"|"EKS_CLUSTER_NAME"|string;
   export interface CoverageStatistics {
     /**
      * Represents coverage statistics for EKS clusters aggregated by resource type.
@@ -1839,7 +1839,7 @@ declare namespace GuardDuty {
   export type Email = string;
   export interface EnableOrganizationAdminAccountRequest {
     /**
-     * The Amazon Web Services Account ID for the organization account to be enabled as a GuardDuty delegated administrator.
+     * The Amazon Web Services account ID for the organization account to be enabled as a GuardDuty delegated administrator.
      */
     AdminAccountId: String;
   }
@@ -1880,7 +1880,7 @@ declare namespace GuardDuty {
   }
   export interface FilterCriterion {
     /**
-     * An enum value representing possible scan properties to match with given scan entries.
+     * An enum value representing possible scan properties to match with given scan entries.  Replace the enum value CLUSTER_NAME with EKS_CLUSTER_NAME. CLUSTER_NAME has been deprecated. 
      */
     CriterionKey?: CriterionKey;
     /**
@@ -3289,7 +3289,7 @@ declare namespace GuardDuty {
      */
     Name?: OrgFeature;
     /**
-     * The status of the feature that will be configured for the organization. Use one of the following values to configure the feature status for the entire organization:    NEW: Indicates that when a new account joins the organization, they will have the feature enabled automatically.     ALL: Indicates that all accounts in the organization have the feature enabled automatically. This includes NEW accounts that join the organization and accounts that may have been suspended or removed from the organization in GuardDuty. It may take up to 24 hours to update the configuration for all the member accounts.    NONE: Indicates that the feature will not be automatically enabled for any account in the organization. The administrator must manage the feature for each account individually.  
+     * Describes the status of the feature that is configured for the member accounts within the organization. One of the following values is the status for the entire organization:    NEW: Indicates that when a new account joins the organization, they will have the feature enabled automatically.     ALL: Indicates that all accounts in the organization have the feature enabled automatically. This includes NEW accounts that join the organization and accounts that may have been suspended or removed from the organization in GuardDuty. It may take up to 24 hours to update the configuration for all the member accounts.    NONE: Indicates that the feature will not be automatically enabled for any account in the organization. The administrator must manage the feature for each account individually.  
      */
     AutoEnable?: OrgFeatureStatus;
     /**
@@ -3864,11 +3864,11 @@ declare namespace GuardDuty {
   }
   export interface ScanConditionPair {
     /**
-     * Represents key  in the map condition.
+     * Represents the key in the map condition.
      */
     Key: TagKey;
     /**
-     * Represents optional value  in the map condition. If not specified, only key  will be matched.
+     * Represents optional value in the map condition. If not specified, only the key will be matched.
      */
     Value?: TagValue;
   }
@@ -4390,7 +4390,7 @@ declare namespace GuardDuty {
      */
     DetectorId: DetectorId;
     /**
-     * Indicates whether to automatically enable member accounts in the organization. Even though this is still supported, we recommend using AutoEnableOrganizationMembers to achieve the similar results. You must provide the value for either autoEnableOrganizationMembers or autoEnable.
+     * Represents whether or not to automatically enable member accounts in the organization. Even though this is still supported, we recommend using AutoEnableOrganizationMembers to achieve the similar results. You must provide a value for either autoEnableOrganizationMembers or autoEnable.
      */
     AutoEnable?: Boolean;
     /**

package/node_modules/aws-sdk/clients/mediaconvert.d.ts

@@ -1265,7 +1265,7 @@ declare namespace MediaConvert {
   export type CmafWriteHLSManifest = "DISABLED"|"ENABLED"|string;
   export type CmafWriteSegmentTimelineInRepresentation = "ENABLED"|"DISABLED"|string;
   export type CmfcAudioDuration = "DEFAULT_CODEC_DURATION"|"MATCH_VIDEO_DURATION"|string;
-  export type CmfcAudioTrackType = "ALTERNATE_AUDIO_AUTO_SELECT_DEFAULT"|"ALTERNATE_AUDIO_AUTO_SELECT"|"ALTERNATE_AUDIO_NOT_AUTO_SELECT"|string;
+  export type CmfcAudioTrackType = "ALTERNATE_AUDIO_AUTO_SELECT_DEFAULT"|"ALTERNATE_AUDIO_AUTO_SELECT"|"ALTERNATE_AUDIO_NOT_AUTO_SELECT"|"AUDIO_ONLY_VARIANT_STREAM"|string;
   export type CmfcDescriptiveVideoServiceFlag = "DONT_FLAG"|"FLAG"|string;
   export type CmfcIFrameOnlyManifest = "INCLUDE"|"EXCLUDE"|string;
   export type CmfcKlvMetadata = "PASSTHROUGH"|"NONE"|string;
@@ -1286,7 +1286,7 @@ declare namespace MediaConvert {
      */
     AudioRenditionSets?: __string;
     /**
-     * Use this setting to control the values that MediaConvert puts in your HLS parent playlist to control how the client player selects which audio track to play. The other options for this setting determine the values that MediaConvert writes for the DEFAULT and AUTOSELECT attributes of the EXT-X-MEDIA entry for the audio variant. For more information about these attributes, see the Apple documentation article https://developer.apple.com/documentation/http_live_streaming/example_playlists_for_http_live_streaming/adding_alternate_media_to_a_playlist. Choose Alternate audio, auto select, default to set DEFAULT=YES and AUTOSELECT=YES. Choose this value for only one variant in your output group. Choose Alternate audio, auto select, not default to set DEFAULT=NO and AUTOSELECT=YES. Choose Alternate Audio, Not Auto Select to set DEFAULT=NO and AUTOSELECT=NO. When you don't specify a value for this setting, MediaConvert defaults to Alternate audio, auto select, default. When there is more than one variant in your output group, you must explicitly choose a value for this setting.
+     * Use this setting to control the values that MediaConvert puts in your HLS parent playlist to control how the client player selects which audio track to play. Choose Audio-only variant stream (AUDIO_ONLY_VARIANT_STREAM) for any variant that you want to prohibit the client from playing with video. This causes MediaConvert to represent the variant as an EXT-X-STREAM-INF in the HLS manifest. The other options for this setting determine the values that MediaConvert writes for the DEFAULT and AUTOSELECT attributes of the EXT-X-MEDIA entry for the audio variant. For more information about these attributes, see the Apple documentation article https://developer.apple.com/documentation/http_live_streaming/example_playlists_for_http_live_streaming/adding_alternate_media_to_a_playlist. Choose Alternate audio, auto select, default to set DEFAULT=YES and AUTOSELECT=YES. Choose this value for only one variant in your output group. Choose Alternate audio, auto select, not default to set DEFAULT=NO and AUTOSELECT=YES. Choose Alternate Audio, Not Auto Select to set DEFAULT=NO and AUTOSELECT=NO. When you don't specify a value for this setting, MediaConvert defaults to Alternate audio, auto select, default. When there is more than one variant in your output group, you must explicitly choose a value for this setting.
      */
     AudioTrackType?: CmfcAudioTrackType;
     /**
@@ -3644,6 +3644,10 @@ Within your job settings, all of your DVB-Sub settings must be identical.
      * If your source content has EIA-608 Line 21 Data Services, enable this feature to specify what MediaConvert does with the Extended Data Services (XDS) packets. You can choose to pass through XDS packets, or remove them from the output. For more information about XDS, see EIA-608 Line Data Services, section 9.5.1.5 05h Content Advisory.
      */
     ExtendedDataServices?: ExtendedDataServices;
+    /**
+     * Specifies which input metadata to use for the default "Follow input" option for the following settings: resolution, frame rate, and pixel aspect ratio. In the simplest case, specify which input is used based on its index in the job. For example if you specify 3, then the fourth input will be used from each input. If the job does not have a fourth input, then the first input will be used. If no followInputIndex is specified, then 0 will be chosen automatically.
+     */
+    FollowInputIndex?: __integerMin0Max149;
     /**
      * Use Inputs to define source file used in the transcode job. There can be multiple inputs add in a job. These inputs will be concantenated together to create the output.
      */
@@ -3750,6 +3754,10 @@ Within your job settings, all of your DVB-Sub settings must be identical.
      * If your source content has EIA-608 Line 21 Data Services, enable this feature to specify what MediaConvert does with the Extended Data Services (XDS) packets. You can choose to pass through XDS packets, or remove them from the output. For more information about XDS, see EIA-608 Line Data Services, section 9.5.1.5 05h Content Advisory.
      */
     ExtendedDataServices?: ExtendedDataServices;
+    /**
+     * Specifies which input metadata to use for the default "Follow input" option for the following settings: resolution, frame rate, and pixel aspect ratio. In the simplest case, specify which input is used based on its index in the job. For example if you specify 3, then the fourth input will be used from each input. If the job does not have a fourth input, then the first input will be used. If no followInputIndex is specified, then 0 will be chosen automatically.
+     */
+    FollowInputIndex?: __integerMin0Max149;
     /**
      * Use Inputs to define the source file used in the transcode job. There can only be one input in a job template. Using the API, you can include multiple inputs when referencing a job template.
      */
@@ -5290,7 +5298,7 @@ When you specify Version 1, you must also set ID3 metadata to Passthrough.
      */
     Encryption?: S3EncryptionSettings;
     /**
-     * Specify the S3 storage class to use for this destination.
+     * Specify the S3 storage class to use for this output. To use your destination's default storage class: Keep the default value, Not set. For more information about S3 storage classes, see https://docs.aws.amazon.com/AmazonS3/latest/userguide/storage-class-intro.html
      */
     StorageClass?: S3StorageClass;
   }
@@ -5338,7 +5346,7 @@ When you specify Version 1, you must also set ID3 metadata to Passthrough.
     /**
      * Specify the URL to the key server that your SPEKE-compliant DRM key provider uses to provide keys for encrypting your content.
      */
-    Url?: __stringPatternHttps;
+    Url?: __stringPatternHttpsD;
   }
   export interface SpekeKeyProviderCmaf {
     /**
@@ -5360,7 +5368,7 @@ When you specify Version 1, you must also set ID3 metadata to Passthrough.
     /**
      * Specify the URL to the key server that your SPEKE-compliant DRM key provider uses to provide keys for encrypting your content.
      */
-    Url?: __stringPatternHttps;
+    Url?: __stringPatternHttpsD;
   }
   export interface SrtDestinationSettings {
     /**
@@ -6225,6 +6233,7 @@ When you specify Version 1, you must also set ID3 metadata to Passthrough.
   export type __integerMin0Max1152000000 = number;
   export type __integerMin0Max128 = number;
   export type __integerMin0Max1466400000 = number;
+  export type __integerMin0Max149 = number;
   export type __integerMin0Max15 = number;
   export type __integerMin0Max16 = number;
   export type __integerMin0Max2147483647 = number;
@@ -6396,6 +6405,7 @@ When you specify Version 1, you must also set ID3 metadata to Passthrough.
   export type __stringPatternArnAwsUsGovCnKmsAZ26EastWestCentralNorthSouthEastWest1912D12KeyAFAF098AFAF094AFAF094AFAF094AFAF0912MrkAFAF0932 = string;
   export type __stringPatternDD = string;
   export type __stringPatternHttps = string;
+  export type __stringPatternHttpsD = string;
   export type __stringPatternHttpsKantarmedia = string;
   export type __stringPatternIdentityAZaZ26AZaZ09163 = string;
   export type __stringPatternS3 = string;

package/node_modules/aws-sdk/dist/aws-sdk-core-react-native.js

@@ -83,7 +83,7 @@ return /******/ (function(modules) { // webpackBootstrap
 	  /**
 	   * @constant
 	   */
-	  VERSION: '2.1462.0',
+	  VERSION: '2.1463.0',
 
 	  /**
 	   * @api private