cdk-lambda-subminute 2.0.242 → 2.0.244

package/node_modules/aws-sdk/clients/kinesisvideo.d.ts

@@ -76,11 +76,11 @@ declare class KinesisVideo extends Service {
    */
   describeMappedResourceConfiguration(callback?: (err: AWSError, data: KinesisVideo.Types.DescribeMappedResourceConfigurationOutput) => void): Request<KinesisVideo.Types.DescribeMappedResourceConfigurationOutput, AWSError>;
   /**
-   * Returns the most current information about the channel. Specify the ChannelName or ChannelARN in the input.
+   *  This API is related to WebRTC Ingestion and is only available in the us-west-2 region.  Returns the most current information about the channel. Specify the ChannelName or ChannelARN in the input.
    */
   describeMediaStorageConfiguration(params: KinesisVideo.Types.DescribeMediaStorageConfigurationInput, callback?: (err: AWSError, data: KinesisVideo.Types.DescribeMediaStorageConfigurationOutput) => void): Request<KinesisVideo.Types.DescribeMediaStorageConfigurationOutput, AWSError>;
   /**
-   * Returns the most current information about the channel. Specify the ChannelName or ChannelARN in the input.
+   *  This API is related to WebRTC Ingestion and is only available in the us-west-2 region.  Returns the most current information about the channel. Specify the ChannelName or ChannelARN in the input.
    */
   describeMediaStorageConfiguration(callback?: (err: AWSError, data: KinesisVideo.Types.DescribeMediaStorageConfigurationOutput) => void): Request<KinesisVideo.Types.DescribeMediaStorageConfigurationOutput, AWSError>;
   /**
@@ -164,11 +164,11 @@ declare class KinesisVideo extends Service {
    */
   listTagsForStream(callback?: (err: AWSError, data: KinesisVideo.Types.ListTagsForStreamOutput) => void): Request<KinesisVideo.Types.ListTagsForStreamOutput, AWSError>;
   /**
-   * An asynchronous API that updates a stream’s existing edge configuration. The Kinesis Video Stream will sync the stream’s edge configuration with the Edge Agent IoT Greengrass component that runs on an IoT Hub Device, setup at your premise. The time to sync can vary and depends on the connectivity of the Hub Device. The SyncStatus will be updated as the edge configuration is acknowledged, and synced with the Edge Agent.  If this API is invoked for the first time, a new edge configuration will be created for the stream, and the sync status will be set to SYNCING. You will have to wait for the sync status to reach a terminal state such as: IN_SYNC, or SYNC_FAILED, before using this API again. If you invoke this API during the syncing process, a ResourceInUseException will be thrown. The connectivity of the stream’s edge configuration and the Edge Agent will be retried for 15 minutes. After 15 minutes, the status will transition into the SYNC_FAILED state.
+   * An asynchronous API that updates a stream’s existing edge configuration. The Kinesis Video Stream will sync the stream’s edge configuration with the Edge Agent IoT Greengrass component that runs on an IoT Hub Device, setup at your premise. The time to sync can vary and depends on the connectivity of the Hub Device. The SyncStatus will be updated as the edge configuration is acknowledged, and synced with the Edge Agent.  If this API is invoked for the first time, a new edge configuration will be created for the stream, and the sync status will be set to SYNCING. You will have to wait for the sync status to reach a terminal state such as: IN_SYNC, or SYNC_FAILED, before using this API again. If you invoke this API during the syncing process, a ResourceInUseException will be thrown. The connectivity of the stream’s edge configuration and the Edge Agent will be retried for 15 minutes. After 15 minutes, the status will transition into the SYNC_FAILED state. To move an edge configuration from one device to another, use DeleteEdgeConfiguration to delete the current edge configuration. You can then invoke StartEdgeConfigurationUpdate with an updated Hub Device ARN.
    */
   startEdgeConfigurationUpdate(params: KinesisVideo.Types.StartEdgeConfigurationUpdateInput, callback?: (err: AWSError, data: KinesisVideo.Types.StartEdgeConfigurationUpdateOutput) => void): Request<KinesisVideo.Types.StartEdgeConfigurationUpdateOutput, AWSError>;
   /**
-   * An asynchronous API that updates a stream’s existing edge configuration. The Kinesis Video Stream will sync the stream’s edge configuration with the Edge Agent IoT Greengrass component that runs on an IoT Hub Device, setup at your premise. The time to sync can vary and depends on the connectivity of the Hub Device. The SyncStatus will be updated as the edge configuration is acknowledged, and synced with the Edge Agent.  If this API is invoked for the first time, a new edge configuration will be created for the stream, and the sync status will be set to SYNCING. You will have to wait for the sync status to reach a terminal state such as: IN_SYNC, or SYNC_FAILED, before using this API again. If you invoke this API during the syncing process, a ResourceInUseException will be thrown. The connectivity of the stream’s edge configuration and the Edge Agent will be retried for 15 minutes. After 15 minutes, the status will transition into the SYNC_FAILED state.
+   * An asynchronous API that updates a stream’s existing edge configuration. The Kinesis Video Stream will sync the stream’s edge configuration with the Edge Agent IoT Greengrass component that runs on an IoT Hub Device, setup at your premise. The time to sync can vary and depends on the connectivity of the Hub Device. The SyncStatus will be updated as the edge configuration is acknowledged, and synced with the Edge Agent.  If this API is invoked for the first time, a new edge configuration will be created for the stream, and the sync status will be set to SYNCING. You will have to wait for the sync status to reach a terminal state such as: IN_SYNC, or SYNC_FAILED, before using this API again. If you invoke this API during the syncing process, a ResourceInUseException will be thrown. The connectivity of the stream’s edge configuration and the Edge Agent will be retried for 15 minutes. After 15 minutes, the status will transition into the SYNC_FAILED state. To move an edge configuration from one device to another, use DeleteEdgeConfiguration to delete the current edge configuration. You can then invoke StartEdgeConfigurationUpdate with an updated Hub Device ARN.
    */
   startEdgeConfigurationUpdate(callback?: (err: AWSError, data: KinesisVideo.Types.StartEdgeConfigurationUpdateOutput) => void): Request<KinesisVideo.Types.StartEdgeConfigurationUpdateOutput, AWSError>;
   /**
@@ -220,11 +220,11 @@ declare class KinesisVideo extends Service {
    */
   updateImageGenerationConfiguration(callback?: (err: AWSError, data: KinesisVideo.Types.UpdateImageGenerationConfigurationOutput) => void): Request<KinesisVideo.Types.UpdateImageGenerationConfigurationOutput, AWSError>;
   /**
-   * Associates a SignalingChannel to a stream to store the media. There are two signaling modes that can specified :   If the StorageStatus is disabled, no data will be stored, and the StreamARN parameter will not be needed.    If the StorageStatus is enabled, the data will be stored in the StreamARN provided.     If StorageStatus is enabled, direct peer-to-peer (master-viewer) connections no longer occur. Peers connect directly to the storage session. You must call the JoinStorageSession API to trigger an SDP offer send and establish a connection between a peer and the storage session.  
+   *  This API is related to WebRTC Ingestion and is only available in the us-west-2 region.  Associates a SignalingChannel to a stream to store the media. There are two signaling modes that can specified :   If the StorageStatus is disabled, no data will be stored, and the StreamARN parameter will not be needed.    If the StorageStatus is enabled, the data will be stored in the StreamARN provided.     If StorageStatus is enabled, direct peer-to-peer (master-viewer) connections no longer occur. Peers connect directly to the storage session. You must call the JoinStorageSession API to trigger an SDP offer send and establish a connection between a peer and the storage session.  
    */
   updateMediaStorageConfiguration(params: KinesisVideo.Types.UpdateMediaStorageConfigurationInput, callback?: (err: AWSError, data: KinesisVideo.Types.UpdateMediaStorageConfigurationOutput) => void): Request<KinesisVideo.Types.UpdateMediaStorageConfigurationOutput, AWSError>;
   /**
-   * Associates a SignalingChannel to a stream to store the media. There are two signaling modes that can specified :   If the StorageStatus is disabled, no data will be stored, and the StreamARN parameter will not be needed.    If the StorageStatus is enabled, the data will be stored in the StreamARN provided.     If StorageStatus is enabled, direct peer-to-peer (master-viewer) connections no longer occur. Peers connect directly to the storage session. You must call the JoinStorageSession API to trigger an SDP offer send and establish a connection between a peer and the storage session.  
+   *  This API is related to WebRTC Ingestion and is only available in the us-west-2 region.  Associates a SignalingChannel to a stream to store the media. There are two signaling modes that can specified :   If the StorageStatus is disabled, no data will be stored, and the StreamARN parameter will not be needed.    If the StorageStatus is enabled, the data will be stored in the StreamARN provided.     If StorageStatus is enabled, direct peer-to-peer (master-viewer) connections no longer occur. Peers connect directly to the storage session. You must call the JoinStorageSession API to trigger an SDP offer send and establish a connection between a peer and the storage session.  
    */
   updateMediaStorageConfiguration(callback?: (err: AWSError, data: KinesisVideo.Types.UpdateMediaStorageConfigurationOutput) => void): Request<KinesisVideo.Types.UpdateMediaStorageConfigurationOutput, AWSError>;
   /**
@@ -653,7 +653,7 @@ declare namespace KinesisVideo {
      */
     DestinationConfig: ImageGenerationDestinationConfig;
     /**
-     * The time interval in milliseconds (ms) at which the images need to be generated from the stream. The minimum value that can be provided is 33 ms, because a camera that generates content at 30 FPS would create a frame every 33.3 ms. If the timestamp range is less than the sampling interval, the Image from the StartTimestamp will be returned if available. 
+     * The time interval in milliseconds (ms) at which the images need to be generated from the stream. The minimum value that can be provided is 200 ms. If the timestamp range is less than the sampling interval, the Image from the StartTimestamp will be returned if available. 
      */
     SamplingInterval: SamplingInterval;
     /**

package/node_modules/aws-sdk/clients/outposts.d.ts

@@ -367,6 +367,10 @@ declare namespace Outposts {
      * The state.   ACTIVE - The asset is available and can provide capacity for new compute resources.   ISOLATED - The asset is undergoing maintenance and can't provide capacity for new compute resources. Existing compute resources on the asset are not affected.   RETIRING - The underlying hardware for the asset is degraded. Capacity for new compute resources is reduced. Amazon Web Services sends notifications for resources that must be stopped before the asset can be replaced.  
      */
     State?: ComputeAssetState;
+    /**
+     * A list of the names of instance families that are currently associated with a given asset.
+     */
+    InstanceFamilies?: InstanceFamilies;
   }
   export interface ConnectionDetails {
     /**
@@ -603,6 +607,8 @@ declare namespace Outposts {
   export type HostId = string;
   export type HostIdList = HostId[];
   export type ISO8601Timestamp = Date;
+  export type InstanceFamilies = InstanceFamilyName[];
+  export type InstanceFamilyName = string;
   export type InstanceType = string;
   export interface InstanceTypeItem {
     InstanceType?: InstanceType;
@@ -612,7 +618,7 @@ declare namespace Outposts {
   export type LifeCycleStatusList = LifeCycleStatus[];
   export interface LineItem {
     /**
-     *  The ID of the catalog item. 
+     *  The ID of the catalog item.
      */
     CatalogItemId?: SkuCode;
     /**
@@ -640,7 +646,7 @@ declare namespace Outposts {
      */
     PreviousLineItemId?: LineItemId;
     /**
-     * The ID of the previous order item.
+     * The ID of the previous order.
      */
     PreviousOrderId?: OrderId;
   }
@@ -826,7 +832,7 @@ declare namespace Outposts {
      */
     PaymentTerm?: PaymentTerm;
     /**
-     * Type of order.
+     * The type of order.
      */
     OrderType?: OrderType;
   }
@@ -842,7 +848,7 @@ declare namespace Outposts {
      */
     OrderId?: OrderId;
     /**
-     *  The type of order. 
+     * The type of order.
      */
     OrderType?: OrderType;
     /**

package/node_modules/aws-sdk/clients/s3.d.ts

@@ -34,19 +34,19 @@ declare class S3 extends S3Customizations {
    */
   completeMultipartUpload(callback?: (err: AWSError, data: S3.Types.CompleteMultipartUploadOutput) => void): Request<S3.Types.CompleteMultipartUploadOutput, AWSError>;
   /**
-   * Creates a copy of an object that is already stored in Amazon S3.  You can store individual objects of up to 5 TB in Amazon S3. You create a copy of your object up to 5 GB in size in a single atomic action using this API. However, to copy an object greater than 5 GB, you must use the multipart upload Upload Part - Copy (UploadPartCopy) API. For more information, see Copy Object Using the REST Multipart Upload API.  All copy requests must be authenticated. Additionally, you must have read access to the source object and write access to the destination bucket. For more information, see REST Authentication. Both the Region that you want to copy the object from and the Region that you want to copy the object to must be enabled for your account. A copy request might return an error when Amazon S3 receives the copy request or while Amazon S3 is copying the files. If the error occurs before the copy action starts, you receive a standard Amazon S3 error. If the error occurs during the copy operation, the error response is embedded in the 200 OK response. This means that a 200 OK response can contain either a success or an error. If you call the S3 API directly, make sure to design your application to parse the contents of the response and handle it appropriately. If you use Amazon Web Services SDKs, SDKs handle this condition. The SDKs detect the embedded error and apply error handling per your configuration settings (including automatically retrying the request as appropriate). If the condition persists, the SDKs throws an exception (or, for the SDKs that don't use exceptions, they return the error). If the copy is successful, you receive a response with information about the copied object.  If the request is an HTTP 1.1 request, the response is chunk encoded. If it were not, it would not contain the content-length, and you would need to read the entire body.  The copy request charge is based on the storage class and Region that you specify for the destination object. The request can also result in a data retrieval charge for the source if the source storage class bills for data retrieval. For pricing information, see Amazon S3 pricing.  Amazon S3 transfer acceleration does not support cross-Region copies. If you request a cross-Region copy using a transfer acceleration endpoint, you get a 400 Bad Request error. For more information, see Transfer Acceleration.   Metadata  When copying an object, you can preserve all metadata (the default) or specify new metadata. However, the access control list (ACL) is not preserved and is set to private for the user making the request. To override the default ACL setting, specify a new ACL when generating a copy request. For more information, see Using ACLs.  To specify whether you want the object metadata copied from the source object or replaced with metadata provided in the request, you can optionally add the x-amz-metadata-directive header. When you grant permissions, you can use the s3:x-amz-metadata-directive condition key to enforce certain metadata behavior when objects are uploaded. For more information, see Specifying Conditions in a Policy in the Amazon S3 User Guide. For a complete list of Amazon S3-specific condition keys, see Actions, Resources, and Condition Keys for Amazon S3.   x-amz-website-redirect-location is unique to each object and must be specified in the request headers to copy the value.   x-amz-copy-source-if Headers  To only copy an object under certain conditions, such as whether the Etag matches or whether the object was modified before or after a specified date, use the following request parameters:    x-amz-copy-source-if-match     x-amz-copy-source-if-none-match     x-amz-copy-source-if-unmodified-since     x-amz-copy-source-if-modified-since     If both the x-amz-copy-source-if-match and x-amz-copy-source-if-unmodified-since headers are present in the request and evaluate as follows, Amazon S3 returns 200 OK and copies the data:    x-amz-copy-source-if-match condition evaluates to true    x-amz-copy-source-if-unmodified-since condition evaluates to false   If both the x-amz-copy-source-if-none-match and x-amz-copy-source-if-modified-since headers are present in the request and evaluate as follows, Amazon S3 returns the 412 Precondition Failed response code:    x-amz-copy-source-if-none-match condition evaluates to false    x-amz-copy-source-if-modified-since condition evaluates to true    All headers with the x-amz- prefix, including x-amz-copy-source, must be signed.   Server-side encryption  Amazon S3 automatically encrypts all new objects that are copied to an S3 bucket. When copying an object, if you don't specify encryption information in your copy request, the encryption setting of the target object is set to the default encryption configuration of the destination bucket. By default, all buckets have a base level of encryption configuration that uses server-side encryption with Amazon S3 managed keys (SSE-S3). If the destination bucket has a default encryption configuration that uses server-side encryption with Key Management Service (KMS) keys (SSE-KMS), dual-layer server-side encryption with Amazon Web Services KMS keys (DSSE-KMS), or server-side encryption with customer-provided encryption keys (SSE-C), Amazon S3 uses the corresponding KMS key, or a customer-provided key to encrypt the target object copy. When you perform a CopyObject operation, if you want to use a different type of encryption setting for the target object, you can use other appropriate encryption-related headers to encrypt the target object with a KMS key, an Amazon S3 managed key, or a customer-provided key. With server-side encryption, Amazon S3 encrypts your data as it writes your data to disks in its data centers and decrypts the data when you access it. If the encryption setting in your request is different from the default encryption configuration of the destination bucket, the encryption setting in your request takes precedence. If the source object for the copy is stored in Amazon S3 using SSE-C, you must provide the necessary encryption information in your request so that Amazon S3 can decrypt the object for copying. For more information about server-side encryption, see Using Server-Side Encryption. If a target object uses SSE-KMS, you can enable an S3 Bucket Key for the object. For more information, see Amazon S3 Bucket Keys in the Amazon S3 User Guide.  Access Control List (ACL)-Specific Request Headers  When copying an object, you can optionally use headers to grant ACL-based permissions. By default, all objects are private. Only the owner has full access control. When adding a new object, you can grant permissions to individual Amazon Web Services accounts or to predefined groups that are defined by Amazon S3. These permissions are then added to the ACL on the object. For more information, see Access Control List (ACL) Overview and Managing ACLs Using the REST API.  If the bucket that you're copying objects to uses the bucket owner enforced setting for S3 Object Ownership, ACLs are disabled and no longer affect permissions. Buckets that use this setting only accept PUT requests that don't specify an ACL or PUT requests that specify bucket owner full control ACLs, such as the bucket-owner-full-control canned ACL or an equivalent form of this ACL expressed in the XML format. For more information, see  Controlling ownership of objects and disabling ACLs in the Amazon S3 User Guide.  If your bucket uses the bucket owner enforced setting for Object Ownership, all objects written to the bucket by any account will be owned by the bucket owner.   Checksums  When copying an object, if it has a checksum, that checksum will be copied to the new object by default. When you copy the object over, you can optionally specify a different checksum algorithm to use with the x-amz-checksum-algorithm header.  Storage Class Options  You can use the CopyObject action to change the storage class of an object that is already stored in Amazon S3 by using the StorageClass parameter. For more information, see Storage Classes in the Amazon S3 User Guide. If the source object's storage class is GLACIER, you must restore a copy of this object before you can use it as a source object for the copy operation. For more information, see RestoreObject. For more information, see Copying Objects.  Versioning  By default, x-amz-copy-source header identifies the current version of an object to copy. If the current version is a delete marker, Amazon S3 behaves as if the object was deleted. To copy a different version, use the versionId subresource. If you enable versioning on the target bucket, Amazon S3 generates a unique version ID for the object being copied. This version ID is different from the version ID of the source object. Amazon S3 returns the version ID of the copied object in the x-amz-version-id response header in the response. If you do not enable versioning or suspend it on the target bucket, the version ID that Amazon S3 generates is always null.   The following operations are related to CopyObject:    PutObject     GetObject   
+   * Creates a copy of an object that is already stored in Amazon S3.  You can store individual objects of up to 5 TB in Amazon S3. You create a copy of your object up to 5 GB in size in a single atomic action using this API. However, to copy an object greater than 5 GB, you must use the multipart upload Upload Part - Copy (UploadPartCopy) API. For more information, see Copy Object Using the REST Multipart Upload API.  All copy requests must be authenticated. Additionally, you must have read access to the source object and write access to the destination bucket. For more information, see REST Authentication. Both the Region that you want to copy the object from and the Region that you want to copy the object to must be enabled for your account. A copy request might return an error when Amazon S3 receives the copy request or while Amazon S3 is copying the files. If the error occurs before the copy action starts, you receive a standard Amazon S3 error. If the error occurs during the copy operation, the error response is embedded in the 200 OK response. This means that a 200 OK response can contain either a success or an error. If you call the S3 API directly, make sure to design your application to parse the contents of the response and handle it appropriately. If you use Amazon Web Services SDKs, SDKs handle this condition. The SDKs detect the embedded error and apply error handling per your configuration settings (including automatically retrying the request as appropriate). If the condition persists, the SDKs throws an exception (or, for the SDKs that don't use exceptions, they return the error). If the copy is successful, you receive a response with information about the copied object.  If the request is an HTTP 1.1 request, the response is chunk encoded. If it were not, it would not contain the content-length, and you would need to read the entire body.  The copy request charge is based on the storage class and Region that you specify for the destination object. The request can also result in a data retrieval charge for the source if the source storage class bills for data retrieval. For pricing information, see Amazon S3 pricing.  Amazon S3 transfer acceleration does not support cross-Region copies. If you request a cross-Region copy using a transfer acceleration endpoint, you get a 400 Bad Request error. For more information, see Transfer Acceleration.   Metadata  When copying an object, you can preserve all metadata (the default) or specify new metadata. However, the access control list (ACL) is not preserved and is set to private for the user making the request. To override the default ACL setting, specify a new ACL when generating a copy request. For more information, see Using ACLs.  To specify whether you want the object metadata copied from the source object or replaced with metadata provided in the request, you can optionally add the x-amz-metadata-directive header. When you grant permissions, you can use the s3:x-amz-metadata-directive condition key to enforce certain metadata behavior when objects are uploaded. For more information, see Specifying Conditions in a Policy in the Amazon S3 User Guide. For a complete list of Amazon S3-specific condition keys, see Actions, Resources, and Condition Keys for Amazon S3.   x-amz-website-redirect-location is unique to each object and must be specified in the request headers to copy the value.   x-amz-copy-source-if Headers  To only copy an object under certain conditions, such as whether the Etag matches or whether the object was modified before or after a specified date, use the following request parameters:    x-amz-copy-source-if-match     x-amz-copy-source-if-none-match     x-amz-copy-source-if-unmodified-since     x-amz-copy-source-if-modified-since     If both the x-amz-copy-source-if-match and x-amz-copy-source-if-unmodified-since headers are present in the request and evaluate as follows, Amazon S3 returns 200 OK and copies the data:    x-amz-copy-source-if-match condition evaluates to true    x-amz-copy-source-if-unmodified-since condition evaluates to false   If both the x-amz-copy-source-if-none-match and x-amz-copy-source-if-modified-since headers are present in the request and evaluate as follows, Amazon S3 returns the 412 Precondition Failed response code:    x-amz-copy-source-if-none-match condition evaluates to false    x-amz-copy-source-if-modified-since condition evaluates to true    All headers with the x-amz- prefix, including x-amz-copy-source, must be signed.   Server-side encryption  Amazon S3 automatically encrypts all new objects that are copied to an S3 bucket. When copying an object, if you don't specify encryption information in your copy request, the encryption setting of the target object is set to the default encryption configuration of the destination bucket. By default, all buckets have a base level of encryption configuration that uses server-side encryption with Amazon S3 managed keys (SSE-S3). If the destination bucket has a default encryption configuration that uses server-side encryption with Key Management Service (KMS) keys (SSE-KMS), dual-layer server-side encryption with Amazon Web Services KMS keys (DSSE-KMS), or server-side encryption with customer-provided encryption keys (SSE-C), Amazon S3 uses the corresponding KMS key, or a customer-provided key to encrypt the target object copy. When you perform a CopyObject operation, if you want to use a different type of encryption setting for the target object, you can use other appropriate encryption-related headers to encrypt the target object with a KMS key, an Amazon S3 managed key, or a customer-provided key. With server-side encryption, Amazon S3 encrypts your data as it writes your data to disks in its data centers and decrypts the data when you access it. If the encryption setting in your request is different from the default encryption configuration of the destination bucket, the encryption setting in your request takes precedence. If the source object for the copy is stored in Amazon S3 using SSE-C, you must provide the necessary encryption information in your request so that Amazon S3 can decrypt the object for copying. For more information about server-side encryption, see Using Server-Side Encryption. If a target object uses SSE-KMS, you can enable an S3 Bucket Key for the object. For more information, see Amazon S3 Bucket Keys in the Amazon S3 User Guide.  Access Control List (ACL)-Specific Request Headers  When copying an object, you can optionally use headers to grant ACL-based permissions. By default, all objects are private. Only the owner has full access control. When adding a new object, you can grant permissions to individual Amazon Web Services accounts or to predefined groups that are defined by Amazon S3. These permissions are then added to the ACL on the object. For more information, see Access Control List (ACL) Overview and Managing ACLs Using the REST API.  If the bucket that you're copying objects to uses the bucket owner enforced setting for S3 Object Ownership, ACLs are disabled and no longer affect permissions. Buckets that use this setting only accept PUT requests that don't specify an ACL or PUT requests that specify bucket owner full control ACLs, such as the bucket-owner-full-control canned ACL or an equivalent form of this ACL expressed in the XML format. For more information, see  Controlling ownership of objects and disabling ACLs in the Amazon S3 User Guide.  If your bucket uses the bucket owner enforced setting for Object Ownership, all objects written to the bucket by any account will be owned by the bucket owner.   Checksums  When copying an object, if it has a checksum, that checksum will be copied to the new object by default. When you copy the object over, you can optionally specify a different checksum algorithm to use with the x-amz-checksum-algorithm header.  Storage Class Options  You can use the CopyObject action to change the storage class of an object that is already stored in Amazon S3 by using the StorageClass parameter. For more information, see Storage Classes in the Amazon S3 User Guide. If the source object's storage class is GLACIER or DEEP_ARCHIVE, or the object's storage class is INTELLIGENT_TIERING and it's  S3 Intelligent-Tiering access tier is Archive Access or Deep Archive Access, you must restore a copy of this object before you can use it as a source object for the copy operation. For more information, see RestoreObject. For more information, see Copying Objects.  Versioning  By default, x-amz-copy-source header identifies the current version of an object to copy. If the current version is a delete marker, Amazon S3 behaves as if the object was deleted. To copy a different version, use the versionId subresource. If you enable versioning on the target bucket, Amazon S3 generates a unique version ID for the object being copied. This version ID is different from the version ID of the source object. Amazon S3 returns the version ID of the copied object in the x-amz-version-id response header in the response. If you do not enable versioning or suspend it on the target bucket, the version ID that Amazon S3 generates is always null.   The following operations are related to CopyObject:    PutObject     GetObject   
    */
   copyObject(params: S3.Types.CopyObjectRequest, callback?: (err: AWSError, data: S3.Types.CopyObjectOutput) => void): Request<S3.Types.CopyObjectOutput, AWSError>;
   /**
-   * Creates a copy of an object that is already stored in Amazon S3.  You can store individual objects of up to 5 TB in Amazon S3. You create a copy of your object up to 5 GB in size in a single atomic action using this API. However, to copy an object greater than 5 GB, you must use the multipart upload Upload Part - Copy (UploadPartCopy) API. For more information, see Copy Object Using the REST Multipart Upload API.  All copy requests must be authenticated. Additionally, you must have read access to the source object and write access to the destination bucket. For more information, see REST Authentication. Both the Region that you want to copy the object from and the Region that you want to copy the object to must be enabled for your account. A copy request might return an error when Amazon S3 receives the copy request or while Amazon S3 is copying the files. If the error occurs before the copy action starts, you receive a standard Amazon S3 error. If the error occurs during the copy operation, the error response is embedded in the 200 OK response. This means that a 200 OK response can contain either a success or an error. If you call the S3 API directly, make sure to design your application to parse the contents of the response and handle it appropriately. If you use Amazon Web Services SDKs, SDKs handle this condition. The SDKs detect the embedded error and apply error handling per your configuration settings (including automatically retrying the request as appropriate). If the condition persists, the SDKs throws an exception (or, for the SDKs that don't use exceptions, they return the error). If the copy is successful, you receive a response with information about the copied object.  If the request is an HTTP 1.1 request, the response is chunk encoded. If it were not, it would not contain the content-length, and you would need to read the entire body.  The copy request charge is based on the storage class and Region that you specify for the destination object. The request can also result in a data retrieval charge for the source if the source storage class bills for data retrieval. For pricing information, see Amazon S3 pricing.  Amazon S3 transfer acceleration does not support cross-Region copies. If you request a cross-Region copy using a transfer acceleration endpoint, you get a 400 Bad Request error. For more information, see Transfer Acceleration.   Metadata  When copying an object, you can preserve all metadata (the default) or specify new metadata. However, the access control list (ACL) is not preserved and is set to private for the user making the request. To override the default ACL setting, specify a new ACL when generating a copy request. For more information, see Using ACLs.  To specify whether you want the object metadata copied from the source object or replaced with metadata provided in the request, you can optionally add the x-amz-metadata-directive header. When you grant permissions, you can use the s3:x-amz-metadata-directive condition key to enforce certain metadata behavior when objects are uploaded. For more information, see Specifying Conditions in a Policy in the Amazon S3 User Guide. For a complete list of Amazon S3-specific condition keys, see Actions, Resources, and Condition Keys for Amazon S3.   x-amz-website-redirect-location is unique to each object and must be specified in the request headers to copy the value.   x-amz-copy-source-if Headers  To only copy an object under certain conditions, such as whether the Etag matches or whether the object was modified before or after a specified date, use the following request parameters:    x-amz-copy-source-if-match     x-amz-copy-source-if-none-match     x-amz-copy-source-if-unmodified-since     x-amz-copy-source-if-modified-since     If both the x-amz-copy-source-if-match and x-amz-copy-source-if-unmodified-since headers are present in the request and evaluate as follows, Amazon S3 returns 200 OK and copies the data:    x-amz-copy-source-if-match condition evaluates to true    x-amz-copy-source-if-unmodified-since condition evaluates to false   If both the x-amz-copy-source-if-none-match and x-amz-copy-source-if-modified-since headers are present in the request and evaluate as follows, Amazon S3 returns the 412 Precondition Failed response code:    x-amz-copy-source-if-none-match condition evaluates to false    x-amz-copy-source-if-modified-since condition evaluates to true    All headers with the x-amz- prefix, including x-amz-copy-source, must be signed.   Server-side encryption  Amazon S3 automatically encrypts all new objects that are copied to an S3 bucket. When copying an object, if you don't specify encryption information in your copy request, the encryption setting of the target object is set to the default encryption configuration of the destination bucket. By default, all buckets have a base level of encryption configuration that uses server-side encryption with Amazon S3 managed keys (SSE-S3). If the destination bucket has a default encryption configuration that uses server-side encryption with Key Management Service (KMS) keys (SSE-KMS), dual-layer server-side encryption with Amazon Web Services KMS keys (DSSE-KMS), or server-side encryption with customer-provided encryption keys (SSE-C), Amazon S3 uses the corresponding KMS key, or a customer-provided key to encrypt the target object copy. When you perform a CopyObject operation, if you want to use a different type of encryption setting for the target object, you can use other appropriate encryption-related headers to encrypt the target object with a KMS key, an Amazon S3 managed key, or a customer-provided key. With server-side encryption, Amazon S3 encrypts your data as it writes your data to disks in its data centers and decrypts the data when you access it. If the encryption setting in your request is different from the default encryption configuration of the destination bucket, the encryption setting in your request takes precedence. If the source object for the copy is stored in Amazon S3 using SSE-C, you must provide the necessary encryption information in your request so that Amazon S3 can decrypt the object for copying. For more information about server-side encryption, see Using Server-Side Encryption. If a target object uses SSE-KMS, you can enable an S3 Bucket Key for the object. For more information, see Amazon S3 Bucket Keys in the Amazon S3 User Guide.  Access Control List (ACL)-Specific Request Headers  When copying an object, you can optionally use headers to grant ACL-based permissions. By default, all objects are private. Only the owner has full access control. When adding a new object, you can grant permissions to individual Amazon Web Services accounts or to predefined groups that are defined by Amazon S3. These permissions are then added to the ACL on the object. For more information, see Access Control List (ACL) Overview and Managing ACLs Using the REST API.  If the bucket that you're copying objects to uses the bucket owner enforced setting for S3 Object Ownership, ACLs are disabled and no longer affect permissions. Buckets that use this setting only accept PUT requests that don't specify an ACL or PUT requests that specify bucket owner full control ACLs, such as the bucket-owner-full-control canned ACL or an equivalent form of this ACL expressed in the XML format. For more information, see  Controlling ownership of objects and disabling ACLs in the Amazon S3 User Guide.  If your bucket uses the bucket owner enforced setting for Object Ownership, all objects written to the bucket by any account will be owned by the bucket owner.   Checksums  When copying an object, if it has a checksum, that checksum will be copied to the new object by default. When you copy the object over, you can optionally specify a different checksum algorithm to use with the x-amz-checksum-algorithm header.  Storage Class Options  You can use the CopyObject action to change the storage class of an object that is already stored in Amazon S3 by using the StorageClass parameter. For more information, see Storage Classes in the Amazon S3 User Guide. If the source object's storage class is GLACIER, you must restore a copy of this object before you can use it as a source object for the copy operation. For more information, see RestoreObject. For more information, see Copying Objects.  Versioning  By default, x-amz-copy-source header identifies the current version of an object to copy. If the current version is a delete marker, Amazon S3 behaves as if the object was deleted. To copy a different version, use the versionId subresource. If you enable versioning on the target bucket, Amazon S3 generates a unique version ID for the object being copied. This version ID is different from the version ID of the source object. Amazon S3 returns the version ID of the copied object in the x-amz-version-id response header in the response. If you do not enable versioning or suspend it on the target bucket, the version ID that Amazon S3 generates is always null.   The following operations are related to CopyObject:    PutObject     GetObject   
+   * Creates a copy of an object that is already stored in Amazon S3.  You can store individual objects of up to 5 TB in Amazon S3. You create a copy of your object up to 5 GB in size in a single atomic action using this API. However, to copy an object greater than 5 GB, you must use the multipart upload Upload Part - Copy (UploadPartCopy) API. For more information, see Copy Object Using the REST Multipart Upload API.  All copy requests must be authenticated. Additionally, you must have read access to the source object and write access to the destination bucket. For more information, see REST Authentication. Both the Region that you want to copy the object from and the Region that you want to copy the object to must be enabled for your account. A copy request might return an error when Amazon S3 receives the copy request or while Amazon S3 is copying the files. If the error occurs before the copy action starts, you receive a standard Amazon S3 error. If the error occurs during the copy operation, the error response is embedded in the 200 OK response. This means that a 200 OK response can contain either a success or an error. If you call the S3 API directly, make sure to design your application to parse the contents of the response and handle it appropriately. If you use Amazon Web Services SDKs, SDKs handle this condition. The SDKs detect the embedded error and apply error handling per your configuration settings (including automatically retrying the request as appropriate). If the condition persists, the SDKs throws an exception (or, for the SDKs that don't use exceptions, they return the error). If the copy is successful, you receive a response with information about the copied object.  If the request is an HTTP 1.1 request, the response is chunk encoded. If it were not, it would not contain the content-length, and you would need to read the entire body.  The copy request charge is based on the storage class and Region that you specify for the destination object. The request can also result in a data retrieval charge for the source if the source storage class bills for data retrieval. For pricing information, see Amazon S3 pricing.  Amazon S3 transfer acceleration does not support cross-Region copies. If you request a cross-Region copy using a transfer acceleration endpoint, you get a 400 Bad Request error. For more information, see Transfer Acceleration.   Metadata  When copying an object, you can preserve all metadata (the default) or specify new metadata. However, the access control list (ACL) is not preserved and is set to private for the user making the request. To override the default ACL setting, specify a new ACL when generating a copy request. For more information, see Using ACLs.  To specify whether you want the object metadata copied from the source object or replaced with metadata provided in the request, you can optionally add the x-amz-metadata-directive header. When you grant permissions, you can use the s3:x-amz-metadata-directive condition key to enforce certain metadata behavior when objects are uploaded. For more information, see Specifying Conditions in a Policy in the Amazon S3 User Guide. For a complete list of Amazon S3-specific condition keys, see Actions, Resources, and Condition Keys for Amazon S3.   x-amz-website-redirect-location is unique to each object and must be specified in the request headers to copy the value.   x-amz-copy-source-if Headers  To only copy an object under certain conditions, such as whether the Etag matches or whether the object was modified before or after a specified date, use the following request parameters:    x-amz-copy-source-if-match     x-amz-copy-source-if-none-match     x-amz-copy-source-if-unmodified-since     x-amz-copy-source-if-modified-since     If both the x-amz-copy-source-if-match and x-amz-copy-source-if-unmodified-since headers are present in the request and evaluate as follows, Amazon S3 returns 200 OK and copies the data:    x-amz-copy-source-if-match condition evaluates to true    x-amz-copy-source-if-unmodified-since condition evaluates to false   If both the x-amz-copy-source-if-none-match and x-amz-copy-source-if-modified-since headers are present in the request and evaluate as follows, Amazon S3 returns the 412 Precondition Failed response code:    x-amz-copy-source-if-none-match condition evaluates to false    x-amz-copy-source-if-modified-since condition evaluates to true    All headers with the x-amz- prefix, including x-amz-copy-source, must be signed.   Server-side encryption  Amazon S3 automatically encrypts all new objects that are copied to an S3 bucket. When copying an object, if you don't specify encryption information in your copy request, the encryption setting of the target object is set to the default encryption configuration of the destination bucket. By default, all buckets have a base level of encryption configuration that uses server-side encryption with Amazon S3 managed keys (SSE-S3). If the destination bucket has a default encryption configuration that uses server-side encryption with Key Management Service (KMS) keys (SSE-KMS), dual-layer server-side encryption with Amazon Web Services KMS keys (DSSE-KMS), or server-side encryption with customer-provided encryption keys (SSE-C), Amazon S3 uses the corresponding KMS key, or a customer-provided key to encrypt the target object copy. When you perform a CopyObject operation, if you want to use a different type of encryption setting for the target object, you can use other appropriate encryption-related headers to encrypt the target object with a KMS key, an Amazon S3 managed key, or a customer-provided key. With server-side encryption, Amazon S3 encrypts your data as it writes your data to disks in its data centers and decrypts the data when you access it. If the encryption setting in your request is different from the default encryption configuration of the destination bucket, the encryption setting in your request takes precedence. If the source object for the copy is stored in Amazon S3 using SSE-C, you must provide the necessary encryption information in your request so that Amazon S3 can decrypt the object for copying. For more information about server-side encryption, see Using Server-Side Encryption. If a target object uses SSE-KMS, you can enable an S3 Bucket Key for the object. For more information, see Amazon S3 Bucket Keys in the Amazon S3 User Guide.  Access Control List (ACL)-Specific Request Headers  When copying an object, you can optionally use headers to grant ACL-based permissions. By default, all objects are private. Only the owner has full access control. When adding a new object, you can grant permissions to individual Amazon Web Services accounts or to predefined groups that are defined by Amazon S3. These permissions are then added to the ACL on the object. For more information, see Access Control List (ACL) Overview and Managing ACLs Using the REST API.  If the bucket that you're copying objects to uses the bucket owner enforced setting for S3 Object Ownership, ACLs are disabled and no longer affect permissions. Buckets that use this setting only accept PUT requests that don't specify an ACL or PUT requests that specify bucket owner full control ACLs, such as the bucket-owner-full-control canned ACL or an equivalent form of this ACL expressed in the XML format. For more information, see  Controlling ownership of objects and disabling ACLs in the Amazon S3 User Guide.  If your bucket uses the bucket owner enforced setting for Object Ownership, all objects written to the bucket by any account will be owned by the bucket owner.   Checksums  When copying an object, if it has a checksum, that checksum will be copied to the new object by default. When you copy the object over, you can optionally specify a different checksum algorithm to use with the x-amz-checksum-algorithm header.  Storage Class Options  You can use the CopyObject action to change the storage class of an object that is already stored in Amazon S3 by using the StorageClass parameter. For more information, see Storage Classes in the Amazon S3 User Guide. If the source object's storage class is GLACIER or DEEP_ARCHIVE, or the object's storage class is INTELLIGENT_TIERING and it's  S3 Intelligent-Tiering access tier is Archive Access or Deep Archive Access, you must restore a copy of this object before you can use it as a source object for the copy operation. For more information, see RestoreObject. For more information, see Copying Objects.  Versioning  By default, x-amz-copy-source header identifies the current version of an object to copy. If the current version is a delete marker, Amazon S3 behaves as if the object was deleted. To copy a different version, use the versionId subresource. If you enable versioning on the target bucket, Amazon S3 generates a unique version ID for the object being copied. This version ID is different from the version ID of the source object. Amazon S3 returns the version ID of the copied object in the x-amz-version-id response header in the response. If you do not enable versioning or suspend it on the target bucket, the version ID that Amazon S3 generates is always null.   The following operations are related to CopyObject:    PutObject     GetObject   
    */
   copyObject(callback?: (err: AWSError, data: S3.Types.CopyObjectOutput) => void): Request<S3.Types.CopyObjectOutput, AWSError>;
   /**
-   * Creates a new S3 bucket. To create a bucket, you must register with Amazon S3 and have a valid Amazon Web Services Access Key ID to authenticate requests. Anonymous requests are never allowed to create buckets. By creating the bucket, you become the bucket owner. Not every string is an acceptable bucket name. For information about bucket naming restrictions, see Bucket naming rules. If you want to create an Amazon S3 on Outposts bucket, see Create Bucket.  By default, the bucket is created in the US East (N. Virginia) Region. You can optionally specify a Region in the request body. You might choose a Region to optimize latency, minimize costs, or address regulatory requirements. For example, if you reside in Europe, you will probably find it advantageous to create buckets in the Europe (Ireland) Region. For more information, see Accessing a bucket.  If you send your create bucket request to the s3.amazonaws.com endpoint, the request goes to the us-east-1 Region. Accordingly, the signature calculations in Signature Version 4 must use us-east-1 as the Region, even if the location constraint in the request specifies another Region where the bucket is to be created. If you create a bucket in a Region other than US East (N. Virginia), your application must be able to handle 307 redirect. For more information, see Virtual hosting of buckets.   Permissions  In addition to s3:CreateBucket, the following permissions are required when your CreateBucket request includes specific headers:    Access control lists (ACLs) - If your CreateBucket request specifies access control list (ACL) permissions and the ACL is public-read, public-read-write, authenticated-read, or if you specify access permissions explicitly through any other ACL, both s3:CreateBucket and s3:PutBucketAcl permissions are needed. If the ACL for the CreateBucket request is private or if the request doesn't specify any ACLs, only s3:CreateBucket permission is needed.     Object Lock - If ObjectLockEnabledForBucket is set to true in your CreateBucket request, s3:PutBucketObjectLockConfiguration and s3:PutBucketVersioning permissions are required.    S3 Object Ownership - If your CreateBucket request includes the x-amz-object-ownership header, then the s3:PutBucketOwnershipControls permission is required. By default, ObjectOwnership is set to BucketOWnerEnforced and ACLs are disabled. We recommend keeping ACLs disabled, except in uncommon use cases where you must control access for each object individually. If you want to change the ObjectOwnership setting, you can use the x-amz-object-ownership header in your CreateBucket request to set the ObjectOwnership setting of your choice. For more information about S3 Object Ownership, see Controlling object ownership  in the Amazon S3 User Guide.    S3 Block Public Access - If your specific use case requires granting public access to your S3 resources, you can disable Block Public Access. You can create a new bucket with Block Public Access enabled, then separately call the  DeletePublicAccessBlock  API. To use this operation, you must have the s3:PutBucketPublicAccessBlock permission. By default, all Block Public Access settings are enabled for new buckets. To avoid inadvertent exposure of your resources, we recommend keeping the S3 Block Public Access settings enabled. For more information about S3 Block Public Access, see Blocking public access to your Amazon S3 storage  in the Amazon S3 User Guide.        If your CreateBucket request sets BucketOwnerEnforced for Amazon S3 Object Ownership and specifies a bucket ACL that provides access to an external Amazon Web Services account, your request fails with a 400 error and returns the InvalidBucketAcLWithObjectOwnership error code. For more information, see Setting Object Ownership on an existing bucket  in the Amazon S3 User Guide.   The following operations are related to CreateBucket:    PutObject     DeleteBucket   
+   * Creates a new S3 bucket. To create a bucket, you must register with Amazon S3 and have a valid Amazon Web Services Access Key ID to authenticate requests. Anonymous requests are never allowed to create buckets. By creating the bucket, you become the bucket owner. Not every string is an acceptable bucket name. For information about bucket naming restrictions, see Bucket naming rules. If you want to create an Amazon S3 on Outposts bucket, see Create Bucket.  By default, the bucket is created in the US East (N. Virginia) Region. You can optionally specify a Region in the request body. To constrain the bucket creation to a specific Region, you can use  LocationConstraint  condition key. You might choose a Region to optimize latency, minimize costs, or address regulatory requirements. For example, if you reside in Europe, you will probably find it advantageous to create buckets in the Europe (Ireland) Region. For more information, see Accessing a bucket.  If you send your create bucket request to the s3.amazonaws.com endpoint, the request goes to the us-east-1 Region. Accordingly, the signature calculations in Signature Version 4 must use us-east-1 as the Region, even if the location constraint in the request specifies another Region where the bucket is to be created. If you create a bucket in a Region other than US East (N. Virginia), your application must be able to handle 307 redirect. For more information, see Virtual hosting of buckets.   Permissions  In addition to s3:CreateBucket, the following permissions are required when your CreateBucket request includes specific headers:    Access control lists (ACLs) - If your CreateBucket request specifies access control list (ACL) permissions and the ACL is public-read, public-read-write, authenticated-read, or if you specify access permissions explicitly through any other ACL, both s3:CreateBucket and s3:PutBucketAcl permissions are needed. If the ACL for the CreateBucket request is private or if the request doesn't specify any ACLs, only s3:CreateBucket permission is needed.     Object Lock - If ObjectLockEnabledForBucket is set to true in your CreateBucket request, s3:PutBucketObjectLockConfiguration and s3:PutBucketVersioning permissions are required.    S3 Object Ownership - If your CreateBucket request includes the x-amz-object-ownership header, then the s3:PutBucketOwnershipControls permission is required. By default, ObjectOwnership is set to BucketOWnerEnforced and ACLs are disabled. We recommend keeping ACLs disabled, except in uncommon use cases where you must control access for each object individually. If you want to change the ObjectOwnership setting, you can use the x-amz-object-ownership header in your CreateBucket request to set the ObjectOwnership setting of your choice. For more information about S3 Object Ownership, see Controlling object ownership  in the Amazon S3 User Guide.    S3 Block Public Access - If your specific use case requires granting public access to your S3 resources, you can disable Block Public Access. You can create a new bucket with Block Public Access enabled, then separately call the  DeletePublicAccessBlock  API. To use this operation, you must have the s3:PutBucketPublicAccessBlock permission. By default, all Block Public Access settings are enabled for new buckets. To avoid inadvertent exposure of your resources, we recommend keeping the S3 Block Public Access settings enabled. For more information about S3 Block Public Access, see Blocking public access to your Amazon S3 storage  in the Amazon S3 User Guide.        If your CreateBucket request sets BucketOwnerEnforced for Amazon S3 Object Ownership and specifies a bucket ACL that provides access to an external Amazon Web Services account, your request fails with a 400 error and returns the InvalidBucketAcLWithObjectOwnership error code. For more information, see Setting Object Ownership on an existing bucket  in the Amazon S3 User Guide.   The following operations are related to CreateBucket:    PutObject     DeleteBucket   
    */
   createBucket(params: S3.Types.CreateBucketRequest, callback?: (err: AWSError, data: S3.Types.CreateBucketOutput) => void): Request<S3.Types.CreateBucketOutput, AWSError>;
   /**
-   * Creates a new S3 bucket. To create a bucket, you must register with Amazon S3 and have a valid Amazon Web Services Access Key ID to authenticate requests. Anonymous requests are never allowed to create buckets. By creating the bucket, you become the bucket owner. Not every string is an acceptable bucket name. For information about bucket naming restrictions, see Bucket naming rules. If you want to create an Amazon S3 on Outposts bucket, see Create Bucket.  By default, the bucket is created in the US East (N. Virginia) Region. You can optionally specify a Region in the request body. You might choose a Region to optimize latency, minimize costs, or address regulatory requirements. For example, if you reside in Europe, you will probably find it advantageous to create buckets in the Europe (Ireland) Region. For more information, see Accessing a bucket.  If you send your create bucket request to the s3.amazonaws.com endpoint, the request goes to the us-east-1 Region. Accordingly, the signature calculations in Signature Version 4 must use us-east-1 as the Region, even if the location constraint in the request specifies another Region where the bucket is to be created. If you create a bucket in a Region other than US East (N. Virginia), your application must be able to handle 307 redirect. For more information, see Virtual hosting of buckets.   Permissions  In addition to s3:CreateBucket, the following permissions are required when your CreateBucket request includes specific headers:    Access control lists (ACLs) - If your CreateBucket request specifies access control list (ACL) permissions and the ACL is public-read, public-read-write, authenticated-read, or if you specify access permissions explicitly through any other ACL, both s3:CreateBucket and s3:PutBucketAcl permissions are needed. If the ACL for the CreateBucket request is private or if the request doesn't specify any ACLs, only s3:CreateBucket permission is needed.     Object Lock - If ObjectLockEnabledForBucket is set to true in your CreateBucket request, s3:PutBucketObjectLockConfiguration and s3:PutBucketVersioning permissions are required.    S3 Object Ownership - If your CreateBucket request includes the x-amz-object-ownership header, then the s3:PutBucketOwnershipControls permission is required. By default, ObjectOwnership is set to BucketOWnerEnforced and ACLs are disabled. We recommend keeping ACLs disabled, except in uncommon use cases where you must control access for each object individually. If you want to change the ObjectOwnership setting, you can use the x-amz-object-ownership header in your CreateBucket request to set the ObjectOwnership setting of your choice. For more information about S3 Object Ownership, see Controlling object ownership  in the Amazon S3 User Guide.    S3 Block Public Access - If your specific use case requires granting public access to your S3 resources, you can disable Block Public Access. You can create a new bucket with Block Public Access enabled, then separately call the  DeletePublicAccessBlock  API. To use this operation, you must have the s3:PutBucketPublicAccessBlock permission. By default, all Block Public Access settings are enabled for new buckets. To avoid inadvertent exposure of your resources, we recommend keeping the S3 Block Public Access settings enabled. For more information about S3 Block Public Access, see Blocking public access to your Amazon S3 storage  in the Amazon S3 User Guide.        If your CreateBucket request sets BucketOwnerEnforced for Amazon S3 Object Ownership and specifies a bucket ACL that provides access to an external Amazon Web Services account, your request fails with a 400 error and returns the InvalidBucketAcLWithObjectOwnership error code. For more information, see Setting Object Ownership on an existing bucket  in the Amazon S3 User Guide.   The following operations are related to CreateBucket:    PutObject     DeleteBucket   
+   * Creates a new S3 bucket. To create a bucket, you must register with Amazon S3 and have a valid Amazon Web Services Access Key ID to authenticate requests. Anonymous requests are never allowed to create buckets. By creating the bucket, you become the bucket owner. Not every string is an acceptable bucket name. For information about bucket naming restrictions, see Bucket naming rules. If you want to create an Amazon S3 on Outposts bucket, see Create Bucket.  By default, the bucket is created in the US East (N. Virginia) Region. You can optionally specify a Region in the request body. To constrain the bucket creation to a specific Region, you can use  LocationConstraint  condition key. You might choose a Region to optimize latency, minimize costs, or address regulatory requirements. For example, if you reside in Europe, you will probably find it advantageous to create buckets in the Europe (Ireland) Region. For more information, see Accessing a bucket.  If you send your create bucket request to the s3.amazonaws.com endpoint, the request goes to the us-east-1 Region. Accordingly, the signature calculations in Signature Version 4 must use us-east-1 as the Region, even if the location constraint in the request specifies another Region where the bucket is to be created. If you create a bucket in a Region other than US East (N. Virginia), your application must be able to handle 307 redirect. For more information, see Virtual hosting of buckets.   Permissions  In addition to s3:CreateBucket, the following permissions are required when your CreateBucket request includes specific headers:    Access control lists (ACLs) - If your CreateBucket request specifies access control list (ACL) permissions and the ACL is public-read, public-read-write, authenticated-read, or if you specify access permissions explicitly through any other ACL, both s3:CreateBucket and s3:PutBucketAcl permissions are needed. If the ACL for the CreateBucket request is private or if the request doesn't specify any ACLs, only s3:CreateBucket permission is needed.     Object Lock - If ObjectLockEnabledForBucket is set to true in your CreateBucket request, s3:PutBucketObjectLockConfiguration and s3:PutBucketVersioning permissions are required.    S3 Object Ownership - If your CreateBucket request includes the x-amz-object-ownership header, then the s3:PutBucketOwnershipControls permission is required. By default, ObjectOwnership is set to BucketOWnerEnforced and ACLs are disabled. We recommend keeping ACLs disabled, except in uncommon use cases where you must control access for each object individually. If you want to change the ObjectOwnership setting, you can use the x-amz-object-ownership header in your CreateBucket request to set the ObjectOwnership setting of your choice. For more information about S3 Object Ownership, see Controlling object ownership  in the Amazon S3 User Guide.    S3 Block Public Access - If your specific use case requires granting public access to your S3 resources, you can disable Block Public Access. You can create a new bucket with Block Public Access enabled, then separately call the  DeletePublicAccessBlock  API. To use this operation, you must have the s3:PutBucketPublicAccessBlock permission. By default, all Block Public Access settings are enabled for new buckets. To avoid inadvertent exposure of your resources, we recommend keeping the S3 Block Public Access settings enabled. For more information about S3 Block Public Access, see Blocking public access to your Amazon S3 storage  in the Amazon S3 User Guide.        If your CreateBucket request sets BucketOwnerEnforced for Amazon S3 Object Ownership and specifies a bucket ACL that provides access to an external Amazon Web Services account, your request fails with a 400 error and returns the InvalidBucketAcLWithObjectOwnership error code. For more information, see Setting Object Ownership on an existing bucket  in the Amazon S3 User Guide.   The following operations are related to CreateBucket:    PutObject     DeleteBucket   
    */
   createBucket(callback?: (err: AWSError, data: S3.Types.CreateBucketOutput) => void): Request<S3.Types.CreateBucketOutput, AWSError>;
   /**
@@ -566,11 +566,11 @@ declare class S3 extends S3Customizations {
    */
   putBucketCors(callback?: (err: AWSError, data: {}) => void): Request<{}, AWSError>;
   /**
-   * This action uses the encryption subresource to configure default encryption and Amazon S3 Bucket Keys for an existing bucket. By default, all buckets have a default encryption configuration that uses server-side encryption with Amazon S3 managed keys (SSE-S3). You can optionally configure default encryption for a bucket by using server-side encryption with Key Management Service (KMS) keys (SSE-KMS), dual-layer server-side encryption with Amazon Web Services KMS keys (DSSE-KMS), or server-side encryption with customer-provided keys (SSE-C). If you specify default encryption by using SSE-KMS, you can also configure Amazon S3 Bucket Keys. For information about bucket default encryption, see Amazon S3 bucket default encryption in the Amazon S3 User Guide. For more information about S3 Bucket Keys, see Amazon S3 Bucket Keys in the Amazon S3 User Guide.  This action requires Amazon Web Services Signature Version 4. For more information, see  Authenticating Requests (Amazon Web Services Signature Version 4).   To use this operation, you must have permission to perform the s3:PutEncryptionConfiguration action. The bucket owner has this permission by default. The bucket owner can grant this permission to others. For more information about permissions, see Permissions Related to Bucket Subresource Operations and Managing Access Permissions to Your Amazon S3 Resources in the Amazon S3 User Guide.  The following operations are related to PutBucketEncryption:    GetBucketEncryption     DeleteBucketEncryption   
+   * This action uses the encryption subresource to configure default encryption and Amazon S3 Bucket Keys for an existing bucket. By default, all buckets have a default encryption configuration that uses server-side encryption with Amazon S3 managed keys (SSE-S3). You can optionally configure default encryption for a bucket by using server-side encryption with Key Management Service (KMS) keys (SSE-KMS) or dual-layer server-side encryption with Amazon Web Services KMS keys (DSSE-KMS). If you specify default encryption by using SSE-KMS, you can also configure Amazon S3 Bucket Keys. If you use PutBucketEncryption to set your default bucket encryption to SSE-KMS, you should verify that your KMS key ID is correct. Amazon S3 does not validate the KMS key ID provided in PutBucketEncryption requests.  This action requires Amazon Web Services Signature Version 4. For more information, see  Authenticating Requests (Amazon Web Services Signature Version 4).   To use this operation, you must have permission to perform the s3:PutEncryptionConfiguration action. The bucket owner has this permission by default. The bucket owner can grant this permission to others. For more information about permissions, see Permissions Related to Bucket Subresource Operations and Managing Access Permissions to Your Amazon S3 Resources in the Amazon S3 User Guide.  The following operations are related to PutBucketEncryption:    GetBucketEncryption     DeleteBucketEncryption   
    */
   putBucketEncryption(params: S3.Types.PutBucketEncryptionRequest, callback?: (err: AWSError, data: {}) => void): Request<{}, AWSError>;
   /**
-   * This action uses the encryption subresource to configure default encryption and Amazon S3 Bucket Keys for an existing bucket. By default, all buckets have a default encryption configuration that uses server-side encryption with Amazon S3 managed keys (SSE-S3). You can optionally configure default encryption for a bucket by using server-side encryption with Key Management Service (KMS) keys (SSE-KMS), dual-layer server-side encryption with Amazon Web Services KMS keys (DSSE-KMS), or server-side encryption with customer-provided keys (SSE-C). If you specify default encryption by using SSE-KMS, you can also configure Amazon S3 Bucket Keys. For information about bucket default encryption, see Amazon S3 bucket default encryption in the Amazon S3 User Guide. For more information about S3 Bucket Keys, see Amazon S3 Bucket Keys in the Amazon S3 User Guide.  This action requires Amazon Web Services Signature Version 4. For more information, see  Authenticating Requests (Amazon Web Services Signature Version 4).   To use this operation, you must have permission to perform the s3:PutEncryptionConfiguration action. The bucket owner has this permission by default. The bucket owner can grant this permission to others. For more information about permissions, see Permissions Related to Bucket Subresource Operations and Managing Access Permissions to Your Amazon S3 Resources in the Amazon S3 User Guide.  The following operations are related to PutBucketEncryption:    GetBucketEncryption     DeleteBucketEncryption   
+   * This action uses the encryption subresource to configure default encryption and Amazon S3 Bucket Keys for an existing bucket. By default, all buckets have a default encryption configuration that uses server-side encryption with Amazon S3 managed keys (SSE-S3). You can optionally configure default encryption for a bucket by using server-side encryption with Key Management Service (KMS) keys (SSE-KMS) or dual-layer server-side encryption with Amazon Web Services KMS keys (DSSE-KMS). If you specify default encryption by using SSE-KMS, you can also configure Amazon S3 Bucket Keys. If you use PutBucketEncryption to set your default bucket encryption to SSE-KMS, you should verify that your KMS key ID is correct. Amazon S3 does not validate the KMS key ID provided in PutBucketEncryption requests.  This action requires Amazon Web Services Signature Version 4. For more information, see  Authenticating Requests (Amazon Web Services Signature Version 4).   To use this operation, you must have permission to perform the s3:PutEncryptionConfiguration action. The bucket owner has this permission by default. The bucket owner can grant this permission to others. For more information about permissions, see Permissions Related to Bucket Subresource Operations and Managing Access Permissions to Your Amazon S3 Resources in the Amazon S3 User Guide.  The following operations are related to PutBucketEncryption:    GetBucketEncryption     DeleteBucketEncryption   
    */
   putBucketEncryption(callback?: (err: AWSError, data: {}) => void): Request<{}, AWSError>;
   /**
@@ -654,11 +654,11 @@ declare class S3 extends S3Customizations {
    */
   putBucketPolicy(callback?: (err: AWSError, data: {}) => void): Request<{}, AWSError>;
   /**
-   *  Creates a replication configuration or replaces an existing one. For more information, see Replication in the Amazon S3 User Guide.  Specify the replication configuration in the request body. In the replication configuration, you provide the name of the destination bucket or buckets where you want Amazon S3 to replicate objects, the IAM role that Amazon S3 can assume to replicate objects on your behalf, and other relevant information. A replication configuration must include at least one rule, and can contain a maximum of 1,000. Each rule identifies a subset of objects to replicate by filtering the objects in the source bucket. To choose additional subsets of objects to replicate, add a rule for each subset. To specify a subset of the objects in the source bucket to apply a replication rule to, add the Filter element as a child of the Rule element. You can filter objects based on an object key prefix, one or more object tags, or both. When you add the Filter element in the configuration, you must also add the following elements: DeleteMarkerReplication, Status, and Priority.  If you are using an earlier version of the replication configuration, Amazon S3 handles replication of delete markers differently. For more information, see Backward Compatibility.  For information about enabling versioning on a bucket, see Using Versioning.  Handling Replication of Encrypted Objects  By default, Amazon S3 doesn't replicate objects that are stored at rest using server-side encryption with KMS keys. To replicate Amazon Web Services KMS-encrypted objects, add the following: SourceSelectionCriteria, SseKmsEncryptedObjects, Status, EncryptionConfiguration, and ReplicaKmsKeyID. For information about replication configuration, see Replicating Objects Created with SSE Using KMS keys. For information on PutBucketReplication errors, see List of replication-related error codes   Permissions  To create a PutBucketReplication request, you must have s3:PutReplicationConfiguration permissions for the bucket.  By default, a resource owner, in this case the Amazon Web Services account that created the bucket, can perform this operation. The resource owner can also grant others permissions to perform the operation. For more information about permissions, see Specifying Permissions in a Policy and Managing Access Permissions to Your Amazon S3 Resources.  To perform this operation, the user or role performing the action must have the iam:PassRole permission.    The following operations are related to PutBucketReplication:    GetBucketReplication     DeleteBucketReplication   
+   *  Creates a replication configuration or replaces an existing one. For more information, see Replication in the Amazon S3 User Guide.  Specify the replication configuration in the request body. In the replication configuration, you provide the name of the destination bucket or buckets where you want Amazon S3 to replicate objects, the IAM role that Amazon S3 can assume to replicate objects on your behalf, and other relevant information. You can invoke this request for a specific Amazon Web Services Region by using the  aws:RequestedRegion  condition key. A replication configuration must include at least one rule, and can contain a maximum of 1,000. Each rule identifies a subset of objects to replicate by filtering the objects in the source bucket. To choose additional subsets of objects to replicate, add a rule for each subset. To specify a subset of the objects in the source bucket to apply a replication rule to, add the Filter element as a child of the Rule element. You can filter objects based on an object key prefix, one or more object tags, or both. When you add the Filter element in the configuration, you must also add the following elements: DeleteMarkerReplication, Status, and Priority.  If you are using an earlier version of the replication configuration, Amazon S3 handles replication of delete markers differently. For more information, see Backward Compatibility.  For information about enabling versioning on a bucket, see Using Versioning.  Handling Replication of Encrypted Objects  By default, Amazon S3 doesn't replicate objects that are stored at rest using server-side encryption with KMS keys. To replicate Amazon Web Services KMS-encrypted objects, add the following: SourceSelectionCriteria, SseKmsEncryptedObjects, Status, EncryptionConfiguration, and ReplicaKmsKeyID. For information about replication configuration, see Replicating Objects Created with SSE Using KMS keys. For information on PutBucketReplication errors, see List of replication-related error codes   Permissions  To create a PutBucketReplication request, you must have s3:PutReplicationConfiguration permissions for the bucket.  By default, a resource owner, in this case the Amazon Web Services account that created the bucket, can perform this operation. The resource owner can also grant others permissions to perform the operation. For more information about permissions, see Specifying Permissions in a Policy and Managing Access Permissions to Your Amazon S3 Resources.  To perform this operation, the user or role performing the action must have the iam:PassRole permission.    The following operations are related to PutBucketReplication:    GetBucketReplication     DeleteBucketReplication   
    */
   putBucketReplication(params: S3.Types.PutBucketReplicationRequest, callback?: (err: AWSError, data: {}) => void): Request<{}, AWSError>;
   /**
-   *  Creates a replication configuration or replaces an existing one. For more information, see Replication in the Amazon S3 User Guide.  Specify the replication configuration in the request body. In the replication configuration, you provide the name of the destination bucket or buckets where you want Amazon S3 to replicate objects, the IAM role that Amazon S3 can assume to replicate objects on your behalf, and other relevant information. A replication configuration must include at least one rule, and can contain a maximum of 1,000. Each rule identifies a subset of objects to replicate by filtering the objects in the source bucket. To choose additional subsets of objects to replicate, add a rule for each subset. To specify a subset of the objects in the source bucket to apply a replication rule to, add the Filter element as a child of the Rule element. You can filter objects based on an object key prefix, one or more object tags, or both. When you add the Filter element in the configuration, you must also add the following elements: DeleteMarkerReplication, Status, and Priority.  If you are using an earlier version of the replication configuration, Amazon S3 handles replication of delete markers differently. For more information, see Backward Compatibility.  For information about enabling versioning on a bucket, see Using Versioning.  Handling Replication of Encrypted Objects  By default, Amazon S3 doesn't replicate objects that are stored at rest using server-side encryption with KMS keys. To replicate Amazon Web Services KMS-encrypted objects, add the following: SourceSelectionCriteria, SseKmsEncryptedObjects, Status, EncryptionConfiguration, and ReplicaKmsKeyID. For information about replication configuration, see Replicating Objects Created with SSE Using KMS keys. For information on PutBucketReplication errors, see List of replication-related error codes   Permissions  To create a PutBucketReplication request, you must have s3:PutReplicationConfiguration permissions for the bucket.  By default, a resource owner, in this case the Amazon Web Services account that created the bucket, can perform this operation. The resource owner can also grant others permissions to perform the operation. For more information about permissions, see Specifying Permissions in a Policy and Managing Access Permissions to Your Amazon S3 Resources.  To perform this operation, the user or role performing the action must have the iam:PassRole permission.    The following operations are related to PutBucketReplication:    GetBucketReplication     DeleteBucketReplication   
+   *  Creates a replication configuration or replaces an existing one. For more information, see Replication in the Amazon S3 User Guide.  Specify the replication configuration in the request body. In the replication configuration, you provide the name of the destination bucket or buckets where you want Amazon S3 to replicate objects, the IAM role that Amazon S3 can assume to replicate objects on your behalf, and other relevant information. You can invoke this request for a specific Amazon Web Services Region by using the  aws:RequestedRegion  condition key. A replication configuration must include at least one rule, and can contain a maximum of 1,000. Each rule identifies a subset of objects to replicate by filtering the objects in the source bucket. To choose additional subsets of objects to replicate, add a rule for each subset. To specify a subset of the objects in the source bucket to apply a replication rule to, add the Filter element as a child of the Rule element. You can filter objects based on an object key prefix, one or more object tags, or both. When you add the Filter element in the configuration, you must also add the following elements: DeleteMarkerReplication, Status, and Priority.  If you are using an earlier version of the replication configuration, Amazon S3 handles replication of delete markers differently. For more information, see Backward Compatibility.  For information about enabling versioning on a bucket, see Using Versioning.  Handling Replication of Encrypted Objects  By default, Amazon S3 doesn't replicate objects that are stored at rest using server-side encryption with KMS keys. To replicate Amazon Web Services KMS-encrypted objects, add the following: SourceSelectionCriteria, SseKmsEncryptedObjects, Status, EncryptionConfiguration, and ReplicaKmsKeyID. For information about replication configuration, see Replicating Objects Created with SSE Using KMS keys. For information on PutBucketReplication errors, see List of replication-related error codes   Permissions  To create a PutBucketReplication request, you must have s3:PutReplicationConfiguration permissions for the bucket.  By default, a resource owner, in this case the Amazon Web Services account that created the bucket, can perform this operation. The resource owner can also grant others permissions to perform the operation. For more information about permissions, see Specifying Permissions in a Policy and Managing Access Permissions to Your Amazon S3 Resources.  To perform this operation, the user or role performing the action must have the iam:PassRole permission.    The following operations are related to PutBucketReplication:    GetBucketReplication     DeleteBucketReplication   
    */
   putBucketReplication(callback?: (err: AWSError, data: {}) => void): Request<{}, AWSError>;
   /**
@@ -670,11 +670,11 @@ declare class S3 extends S3Customizations {
    */
   putBucketRequestPayment(callback?: (err: AWSError, data: {}) => void): Request<{}, AWSError>;
   /**
-   * Sets the tags for a bucket. Use tags to organize your Amazon Web Services bill to reflect your own cost structure. To do this, sign up to get your Amazon Web Services account bill with tag key values included. Then, to see the cost of combined resources, organize your billing information according to resources with the same tag key values. For example, you can tag several resources with a specific application name, and then organize your billing information to see the total cost of that application across several services. For more information, see Cost Allocation and Tagging and Using Cost Allocation in Amazon S3 Bucket Tags.   When this operation sets the tags for a bucket, it will overwrite any current tags the bucket already has. You cannot use this operation to add tags to an existing list of tags.  To use this operation, you must have permissions to perform the s3:PutBucketTagging action. The bucket owner has this permission by default and can grant this permission to others. For more information about permissions, see Permissions Related to Bucket Subresource Operations and Managing Access Permissions to Your Amazon S3 Resources.  PutBucketTagging has the following special errors:   Error code: InvalidTagError    Description: The tag provided was not a valid tag. This error can occur if the tag did not pass input validation. For information about tag restrictions, see User-Defined Tag Restrictions and Amazon Web Services-Generated Cost Allocation Tag Restrictions.     Error code: MalformedXMLError    Description: The XML provided does not match the schema.     Error code: OperationAbortedError     Description: A conflicting conditional action is currently in progress against this resource. Please try again.     Error code: InternalError    Description: The service was unable to apply the provided tag to the bucket.     The following operations are related to PutBucketTagging:    GetBucketTagging     DeleteBucketTagging   
+   * Sets the tags for a bucket. Use tags to organize your Amazon Web Services bill to reflect your own cost structure. To do this, sign up to get your Amazon Web Services account bill with tag key values included. Then, to see the cost of combined resources, organize your billing information according to resources with the same tag key values. For example, you can tag several resources with a specific application name, and then organize your billing information to see the total cost of that application across several services. For more information, see Cost Allocation and Tagging and Using Cost Allocation in Amazon S3 Bucket Tags.   When this operation sets the tags for a bucket, it will overwrite any current tags the bucket already has. You cannot use this operation to add tags to an existing list of tags.  To use this operation, you must have permissions to perform the s3:PutBucketTagging action. The bucket owner has this permission by default and can grant this permission to others. For more information about permissions, see Permissions Related to Bucket Subresource Operations and Managing Access Permissions to Your Amazon S3 Resources.  PutBucketTagging has the following special errors. For more Amazon S3 errors see, Error Responses.    InvalidTag - The tag provided was not a valid tag. This error can occur if the tag did not pass input validation. For more information, see Using Cost Allocation in Amazon S3 Bucket Tags.    MalformedXML - The XML provided does not match the schema.    OperationAborted - A conflicting conditional action is currently in progress against this resource. Please try again.    InternalError - The service was unable to apply the provided tag to the bucket.   The following operations are related to PutBucketTagging:    GetBucketTagging     DeleteBucketTagging   
    */
   putBucketTagging(params: S3.Types.PutBucketTaggingRequest, callback?: (err: AWSError, data: {}) => void): Request<{}, AWSError>;
   /**
-   * Sets the tags for a bucket. Use tags to organize your Amazon Web Services bill to reflect your own cost structure. To do this, sign up to get your Amazon Web Services account bill with tag key values included. Then, to see the cost of combined resources, organize your billing information according to resources with the same tag key values. For example, you can tag several resources with a specific application name, and then organize your billing information to see the total cost of that application across several services. For more information, see Cost Allocation and Tagging and Using Cost Allocation in Amazon S3 Bucket Tags.   When this operation sets the tags for a bucket, it will overwrite any current tags the bucket already has. You cannot use this operation to add tags to an existing list of tags.  To use this operation, you must have permissions to perform the s3:PutBucketTagging action. The bucket owner has this permission by default and can grant this permission to others. For more information about permissions, see Permissions Related to Bucket Subresource Operations and Managing Access Permissions to Your Amazon S3 Resources.  PutBucketTagging has the following special errors:   Error code: InvalidTagError    Description: The tag provided was not a valid tag. This error can occur if the tag did not pass input validation. For information about tag restrictions, see User-Defined Tag Restrictions and Amazon Web Services-Generated Cost Allocation Tag Restrictions.     Error code: MalformedXMLError    Description: The XML provided does not match the schema.     Error code: OperationAbortedError     Description: A conflicting conditional action is currently in progress against this resource. Please try again.     Error code: InternalError    Description: The service was unable to apply the provided tag to the bucket.     The following operations are related to PutBucketTagging:    GetBucketTagging     DeleteBucketTagging   
+   * Sets the tags for a bucket. Use tags to organize your Amazon Web Services bill to reflect your own cost structure. To do this, sign up to get your Amazon Web Services account bill with tag key values included. Then, to see the cost of combined resources, organize your billing information according to resources with the same tag key values. For example, you can tag several resources with a specific application name, and then organize your billing information to see the total cost of that application across several services. For more information, see Cost Allocation and Tagging and Using Cost Allocation in Amazon S3 Bucket Tags.   When this operation sets the tags for a bucket, it will overwrite any current tags the bucket already has. You cannot use this operation to add tags to an existing list of tags.  To use this operation, you must have permissions to perform the s3:PutBucketTagging action. The bucket owner has this permission by default and can grant this permission to others. For more information about permissions, see Permissions Related to Bucket Subresource Operations and Managing Access Permissions to Your Amazon S3 Resources.  PutBucketTagging has the following special errors. For more Amazon S3 errors see, Error Responses.    InvalidTag - The tag provided was not a valid tag. This error can occur if the tag did not pass input validation. For more information, see Using Cost Allocation in Amazon S3 Bucket Tags.    MalformedXML - The XML provided does not match the schema.    OperationAborted - A conflicting conditional action is currently in progress against this resource. Please try again.    InternalError - The service was unable to apply the provided tag to the bucket.   The following operations are related to PutBucketTagging:    GetBucketTagging     DeleteBucketTagging   
    */
   putBucketTagging(callback?: (err: AWSError, data: {}) => void): Request<{}, AWSError>;
   /**
@@ -686,11 +686,11 @@ declare class S3 extends S3Customizations {
    */
   putBucketVersioning(callback?: (err: AWSError, data: {}) => void): Request<{}, AWSError>;
   /**
-   * Sets the configuration of the website that is specified in the website subresource. To configure a bucket as a website, you can add this subresource on the bucket with website configuration information such as the file name of the index document and any redirect rules. For more information, see Hosting Websites on Amazon S3. This PUT action requires the S3:PutBucketWebsite permission. By default, only the bucket owner can configure the website attached to a bucket; however, bucket owners can allow other users to set the website configuration by writing a bucket policy that grants them the S3:PutBucketWebsite permission. To redirect all website requests sent to the bucket's website endpoint, you add a website configuration with the following elements. Because all requests are sent to another website, you don't need to provide index document name for the bucket.    WebsiteConfiguration     RedirectAllRequestsTo     HostName     Protocol    If you want granular control over redirects, you can use the following elements to add routing rules that describe conditions for redirecting requests and information about the redirect destination. In this case, the website configuration must provide an index document for the bucket, because some requests might not be redirected.     WebsiteConfiguration     IndexDocument     Suffix     ErrorDocument     Key     RoutingRules     RoutingRule     Condition     HttpErrorCodeReturnedEquals     KeyPrefixEquals     Redirect     Protocol     HostName     ReplaceKeyPrefixWith     ReplaceKeyWith     HttpRedirectCode    Amazon S3 has a limitation of 50 routing rules per website configuration. If you require more than 50 routing rules, you can use object redirect. For more information, see Configuring an Object Redirect in the Amazon S3 User Guide.
+   * Sets the configuration of the website that is specified in the website subresource. To configure a bucket as a website, you can add this subresource on the bucket with website configuration information such as the file name of the index document and any redirect rules. For more information, see Hosting Websites on Amazon S3. This PUT action requires the S3:PutBucketWebsite permission. By default, only the bucket owner can configure the website attached to a bucket; however, bucket owners can allow other users to set the website configuration by writing a bucket policy that grants them the S3:PutBucketWebsite permission. To redirect all website requests sent to the bucket's website endpoint, you add a website configuration with the following elements. Because all requests are sent to another website, you don't need to provide index document name for the bucket.    WebsiteConfiguration     RedirectAllRequestsTo     HostName     Protocol    If you want granular control over redirects, you can use the following elements to add routing rules that describe conditions for redirecting requests and information about the redirect destination. In this case, the website configuration must provide an index document for the bucket, because some requests might not be redirected.     WebsiteConfiguration     IndexDocument     Suffix     ErrorDocument     Key     RoutingRules     RoutingRule     Condition     HttpErrorCodeReturnedEquals     KeyPrefixEquals     Redirect     Protocol     HostName     ReplaceKeyPrefixWith     ReplaceKeyWith     HttpRedirectCode    Amazon S3 has a limitation of 50 routing rules per website configuration. If you require more than 50 routing rules, you can use object redirect. For more information, see Configuring an Object Redirect in the Amazon S3 User Guide. The maximum request length is limited to 128 KB.
    */
   putBucketWebsite(params: S3.Types.PutBucketWebsiteRequest, callback?: (err: AWSError, data: {}) => void): Request<{}, AWSError>;
   /**
-   * Sets the configuration of the website that is specified in the website subresource. To configure a bucket as a website, you can add this subresource on the bucket with website configuration information such as the file name of the index document and any redirect rules. For more information, see Hosting Websites on Amazon S3. This PUT action requires the S3:PutBucketWebsite permission. By default, only the bucket owner can configure the website attached to a bucket; however, bucket owners can allow other users to set the website configuration by writing a bucket policy that grants them the S3:PutBucketWebsite permission. To redirect all website requests sent to the bucket's website endpoint, you add a website configuration with the following elements. Because all requests are sent to another website, you don't need to provide index document name for the bucket.    WebsiteConfiguration     RedirectAllRequestsTo     HostName     Protocol    If you want granular control over redirects, you can use the following elements to add routing rules that describe conditions for redirecting requests and information about the redirect destination. In this case, the website configuration must provide an index document for the bucket, because some requests might not be redirected.     WebsiteConfiguration     IndexDocument     Suffix     ErrorDocument     Key     RoutingRules     RoutingRule     Condition     HttpErrorCodeReturnedEquals     KeyPrefixEquals     Redirect     Protocol     HostName     ReplaceKeyPrefixWith     ReplaceKeyWith     HttpRedirectCode    Amazon S3 has a limitation of 50 routing rules per website configuration. If you require more than 50 routing rules, you can use object redirect. For more information, see Configuring an Object Redirect in the Amazon S3 User Guide.
+   * Sets the configuration of the website that is specified in the website subresource. To configure a bucket as a website, you can add this subresource on the bucket with website configuration information such as the file name of the index document and any redirect rules. For more information, see Hosting Websites on Amazon S3. This PUT action requires the S3:PutBucketWebsite permission. By default, only the bucket owner can configure the website attached to a bucket; however, bucket owners can allow other users to set the website configuration by writing a bucket policy that grants them the S3:PutBucketWebsite permission. To redirect all website requests sent to the bucket's website endpoint, you add a website configuration with the following elements. Because all requests are sent to another website, you don't need to provide index document name for the bucket.    WebsiteConfiguration     RedirectAllRequestsTo     HostName     Protocol    If you want granular control over redirects, you can use the following elements to add routing rules that describe conditions for redirecting requests and information about the redirect destination. In this case, the website configuration must provide an index document for the bucket, because some requests might not be redirected.     WebsiteConfiguration     IndexDocument     Suffix     ErrorDocument     Key     RoutingRules     RoutingRule     Condition     HttpErrorCodeReturnedEquals     KeyPrefixEquals     Redirect     Protocol     HostName     ReplaceKeyPrefixWith     ReplaceKeyWith     HttpRedirectCode    Amazon S3 has a limitation of 50 routing rules per website configuration. If you require more than 50 routing rules, you can use object redirect. For more information, see Configuring an Object Redirect in the Amazon S3 User Guide. The maximum request length is limited to 128 KB.
    */
   putBucketWebsite(callback?: (err: AWSError, data: {}) => void): Request<{}, AWSError>;
   /**
@@ -734,19 +734,19 @@ declare class S3 extends S3Customizations {
    */
   putObjectRetention(callback?: (err: AWSError, data: S3.Types.PutObjectRetentionOutput) => void): Request<S3.Types.PutObjectRetentionOutput, AWSError>;
   /**
-   * Sets the supplied tag-set to an object that already exists in a bucket. A tag is a key-value pair. You can associate tags with an object by sending a PUT request against the tagging subresource that is associated with the object. You can retrieve tags by sending a GET request. For more information, see GetObjectTagging. For tagging-related restrictions related to characters and encodings, see Tag Restrictions. Note that Amazon S3 limits the maximum number of tags to 10 tags per object. To use this operation, you must have permission to perform the s3:PutObjectTagging action. By default, the bucket owner has this permission and can grant this permission to others. To put tags of any other version, use the versionId query parameter. You also need permission for the s3:PutObjectVersionTagging action. For information about the Amazon S3 object tagging feature, see Object Tagging.  PutObjectTagging has the following special errors:      Code: InvalidTagError      Cause: The tag provided was not a valid tag. This error can occur if the tag did not pass input validation. For more information, see Object Tagging.         Code: MalformedXMLError      Cause: The XML provided does not match the schema.         Code: OperationAbortedError      Cause: A conflicting conditional action is currently in progress against this resource. Please try again.         Code: InternalError     Cause: The service was unable to apply the provided tag to the object.      The following operations are related to PutObjectTagging:    GetObjectTagging     DeleteObjectTagging   
+   * Sets the supplied tag-set to an object that already exists in a bucket. A tag is a key-value pair. For more information, see Object Tagging. You can associate tags with an object by sending a PUT request against the tagging subresource that is associated with the object. You can retrieve tags by sending a GET request. For more information, see GetObjectTagging. For tagging-related restrictions related to characters and encodings, see Tag Restrictions. Note that Amazon S3 limits the maximum number of tags to 10 tags per object. To use this operation, you must have permission to perform the s3:PutObjectTagging action. By default, the bucket owner has this permission and can grant this permission to others. To put tags of any other version, use the versionId query parameter. You also need permission for the s3:PutObjectVersionTagging action.  PutObjectTagging has the following special errors. For more Amazon S3 errors see, Error Responses.    InvalidTag - The tag provided was not a valid tag. This error can occur if the tag did not pass input validation. For more information, see Object Tagging.    MalformedXML - The XML provided does not match the schema.    OperationAborted - A conflicting conditional action is currently in progress against this resource. Please try again.    InternalError - The service was unable to apply the provided tag to the object.   The following operations are related to PutObjectTagging:    GetObjectTagging     DeleteObjectTagging   
    */
   putObjectTagging(params: S3.Types.PutObjectTaggingRequest, callback?: (err: AWSError, data: S3.Types.PutObjectTaggingOutput) => void): Request<S3.Types.PutObjectTaggingOutput, AWSError>;
   /**
-   * Sets the supplied tag-set to an object that already exists in a bucket. A tag is a key-value pair. You can associate tags with an object by sending a PUT request against the tagging subresource that is associated with the object. You can retrieve tags by sending a GET request. For more information, see GetObjectTagging. For tagging-related restrictions related to characters and encodings, see Tag Restrictions. Note that Amazon S3 limits the maximum number of tags to 10 tags per object. To use this operation, you must have permission to perform the s3:PutObjectTagging action. By default, the bucket owner has this permission and can grant this permission to others. To put tags of any other version, use the versionId query parameter. You also need permission for the s3:PutObjectVersionTagging action. For information about the Amazon S3 object tagging feature, see Object Tagging.  PutObjectTagging has the following special errors:      Code: InvalidTagError      Cause: The tag provided was not a valid tag. This error can occur if the tag did not pass input validation. For more information, see Object Tagging.         Code: MalformedXMLError      Cause: The XML provided does not match the schema.         Code: OperationAbortedError      Cause: A conflicting conditional action is currently in progress against this resource. Please try again.         Code: InternalError     Cause: The service was unable to apply the provided tag to the object.      The following operations are related to PutObjectTagging:    GetObjectTagging     DeleteObjectTagging   
+   * Sets the supplied tag-set to an object that already exists in a bucket. A tag is a key-value pair. For more information, see Object Tagging. You can associate tags with an object by sending a PUT request against the tagging subresource that is associated with the object. You can retrieve tags by sending a GET request. For more information, see GetObjectTagging. For tagging-related restrictions related to characters and encodings, see Tag Restrictions. Note that Amazon S3 limits the maximum number of tags to 10 tags per object. To use this operation, you must have permission to perform the s3:PutObjectTagging action. By default, the bucket owner has this permission and can grant this permission to others. To put tags of any other version, use the versionId query parameter. You also need permission for the s3:PutObjectVersionTagging action.  PutObjectTagging has the following special errors. For more Amazon S3 errors see, Error Responses.    InvalidTag - The tag provided was not a valid tag. This error can occur if the tag did not pass input validation. For more information, see Object Tagging.    MalformedXML - The XML provided does not match the schema.    OperationAborted - A conflicting conditional action is currently in progress against this resource. Please try again.    InternalError - The service was unable to apply the provided tag to the object.   The following operations are related to PutObjectTagging:    GetObjectTagging     DeleteObjectTagging   
    */
   putObjectTagging(callback?: (err: AWSError, data: S3.Types.PutObjectTaggingOutput) => void): Request<S3.Types.PutObjectTaggingOutput, AWSError>;
   /**
-   * Creates or modifies the PublicAccessBlock configuration for an Amazon S3 bucket. To use this operation, you must have the s3:PutBucketPublicAccessBlock permission. For more information about Amazon S3 permissions, see Specifying Permissions in a Policy.  When Amazon S3 evaluates the PublicAccessBlock configuration for a bucket or an object, it checks the PublicAccessBlock configuration for both the bucket (or the bucket that contains the object) and the bucket owner's account. If the PublicAccessBlock configurations are different between the bucket and the account, Amazon S3 uses the most restrictive combination of the bucket-level and account-level settings.  For more information about when Amazon S3 considers a bucket or an object public, see The Meaning of "Public". The following operations are related to PutPublicAccessBlock:    GetPublicAccessBlock     DeletePublicAccessBlock     GetBucketPolicyStatus     Using Amazon S3 Block Public Access   
+   * Creates or modifies the PublicAccessBlock configuration for an Amazon S3 bucket. To use this operation, you must have the s3:PutBucketPublicAccessBlock permission. For more information about Amazon S3 permissions, see Specifying Permissions in a Policy.  When Amazon S3 evaluates the PublicAccessBlock configuration for a bucket or an object, it checks the PublicAccessBlock configuration for both the bucket (or the bucket that contains the object) and the bucket owner's account. If the PublicAccessBlock configurations are different between the bucket and the account, S3 uses the most restrictive combination of the bucket-level and account-level settings.  For more information about when Amazon S3 considers a bucket or an object public, see The Meaning of "Public". The following operations are related to PutPublicAccessBlock:    GetPublicAccessBlock     DeletePublicAccessBlock     GetBucketPolicyStatus     Using Amazon S3 Block Public Access   
    */
   putPublicAccessBlock(params: S3.Types.PutPublicAccessBlockRequest, callback?: (err: AWSError, data: {}) => void): Request<{}, AWSError>;
   /**
-   * Creates or modifies the PublicAccessBlock configuration for an Amazon S3 bucket. To use this operation, you must have the s3:PutBucketPublicAccessBlock permission. For more information about Amazon S3 permissions, see Specifying Permissions in a Policy.  When Amazon S3 evaluates the PublicAccessBlock configuration for a bucket or an object, it checks the PublicAccessBlock configuration for both the bucket (or the bucket that contains the object) and the bucket owner's account. If the PublicAccessBlock configurations are different between the bucket and the account, Amazon S3 uses the most restrictive combination of the bucket-level and account-level settings.  For more information about when Amazon S3 considers a bucket or an object public, see The Meaning of "Public". The following operations are related to PutPublicAccessBlock:    GetPublicAccessBlock     DeletePublicAccessBlock     GetBucketPolicyStatus     Using Amazon S3 Block Public Access   
+   * Creates or modifies the PublicAccessBlock configuration for an Amazon S3 bucket. To use this operation, you must have the s3:PutBucketPublicAccessBlock permission. For more information about Amazon S3 permissions, see Specifying Permissions in a Policy.  When Amazon S3 evaluates the PublicAccessBlock configuration for a bucket or an object, it checks the PublicAccessBlock configuration for both the bucket (or the bucket that contains the object) and the bucket owner's account. If the PublicAccessBlock configurations are different between the bucket and the account, S3 uses the most restrictive combination of the bucket-level and account-level settings.  For more information about when Amazon S3 considers a bucket or an object public, see The Meaning of "Public". The following operations are related to PutPublicAccessBlock:    GetPublicAccessBlock     DeletePublicAccessBlock     GetBucketPolicyStatus     Using Amazon S3 Block Public Access   
    */
   putPublicAccessBlock(callback?: (err: AWSError, data: {}) => void): Request<{}, AWSError>;
   /**
@@ -1422,7 +1422,7 @@ declare namespace S3 {
      */
     ServerSideEncryption?: ServerSideEncryption;
     /**
-     * By default, Amazon S3 uses the STANDARD Storage Class to store newly created objects. The STANDARD storage class provides high durability and high availability. Depending on performance needs, you can specify a different Storage Class. Amazon S3 on Outposts only uses the OUTPOSTS Storage Class. For more information, see Storage Classes in the Amazon S3 User Guide.
+     * If the x-amz-storage-class header is not used, the copied object will be stored in the STANDARD Storage Class by default. The STANDARD storage class provides high durability and high availability. Depending on performance needs, you can specify a different Storage Class. Amazon S3 on Outposts only uses the OUTPOSTS Storage Class. For more information, see Storage Classes in the Amazon S3 User Guide.
      */
     StorageClass?: StorageClass;
     /**
@@ -1442,7 +1442,7 @@ declare namespace S3 {
      */
     SSECustomerKeyMD5?: SSECustomerKeyMD5;
     /**
-     * Specifies the KMS key ID to use for object encryption. All GET and PUT requests for an object protected by KMS will fail if they're not made via SSL or using SigV4. For information about configuring any of the officially supported Amazon Web Services SDKs and Amazon Web Services CLI, see Specifying the Signature Version in Request Authentication in the Amazon S3 User Guide.
+     * Specifies the KMS ID (Key ID, Key ARN, or Key Alias) to use for object encryption. All GET and PUT requests for an object protected by KMS will fail if they're not made via SSL or using SigV4. For information about configuring any of the officially supported Amazon Web Services SDKs and Amazon Web Services CLI, see Specifying the Signature Version in Request Authentication in the Amazon S3 User Guide.
      */
     SSEKMSKeyId?: SSEKMSKeyId;
     /**
@@ -1737,7 +1737,7 @@ declare namespace S3 {
      */
     SSECustomerKeyMD5?: SSECustomerKeyMD5;
     /**
-     * Specifies the ID of the symmetric encryption customer managed key to use for object encryption. All GET and PUT requests for an object protected by KMS will fail if they're not made via SSL or using SigV4. For information about configuring any of the officially supported Amazon Web Services SDKs and Amazon Web Services CLI, see Specifying the Signature Version in Request Authentication in the Amazon S3 User Guide.
+     * Specifies the ID (Key ID, Key ARN, or Key Alias) of the symmetric encryption customer managed key to use for object encryption. All GET and PUT requests for an object protected by KMS will fail if they're not made via SSL or using SigV4. For information about configuring any of the officially supported Amazon Web Services SDKs and Amazon Web Services CLI, see Specifying the Signature Version in Request Authentication in the Amazon S3 User Guide.
      */
     SSEKMSKeyId?: SSEKMSKeyId;
     /**
@@ -1978,7 +1978,7 @@ declare namespace S3 {
   export type DeleteMarkers = DeleteMarkerEntry[];
   export interface DeleteObjectOutput {
     /**
-     * Specifies whether the versioned object that was permanently deleted was (true) or was not (false) a delete marker.
+     * Indicates whether the specified object version that was permanently deleted was (true) or was not (false) a delete marker before deletion. In a simple DELETE, this header indicates whether (true) or not (false) the current version of the object is a delete marker.
      */
     DeleteMarker?: DeleteMarker;
     /**
@@ -2096,7 +2096,7 @@ declare namespace S3 {
      */
     VersionId?: ObjectVersionId;
     /**
-     * Specifies whether the versioned object that was permanently deleted was (true) or was not (false) a delete marker. In a simple DELETE, this header indicates whether (true) or not (false) a delete marker was created.
+     * Indicates whether the specified object version that was permanently deleted was (true) or was not (false) a delete marker before deletion. In a simple DELETE, this header indicates whether (true) or not (false) the current version of the object is a delete marker.
      */
     DeleteMarker?: DeleteMarker;
     /**
@@ -5418,7 +5418,7 @@ declare namespace S3 {
      */
     SSECustomerKeyMD5?: SSECustomerKeyMD5;
     /**
-     * If x-amz-server-side-encryption has a valid value of aws:kms or aws:kms:dsse, this header specifies the ID of the Key Management Service (KMS) symmetric encryption customer managed key that was used for the object. If you specify x-amz-server-side-encryption:aws:kms or x-amz-server-side-encryption:aws:kms:dsse, but do not provide x-amz-server-side-encryption-aws-kms-key-id, Amazon S3 uses the Amazon Web Services managed key (aws/s3) to protect the data. If the KMS key does not exist in the same account that's issuing the command, you must use the full ARN and not just the ID. 
+     * If x-amz-server-side-encryption has a valid value of aws:kms or aws:kms:dsse, this header specifies the ID (Key ID, Key ARN, or Key Alias) of the Key Management Service (KMS) symmetric encryption customer managed key that was used for the object. If you specify x-amz-server-side-encryption:aws:kms or x-amz-server-side-encryption:aws:kms:dsse, but do not provide x-amz-server-side-encryption-aws-kms-key-id, Amazon S3 uses the Amazon Web Services managed key (aws/s3) to protect the data. If the KMS key does not exist in the same account that's issuing the command, you must use the full ARN and not just the ID. 
      */
     SSEKMSKeyId?: SSEKMSKeyId;
     /**
@@ -5988,7 +5988,7 @@ declare namespace S3 {
      */
     SSEAlgorithm: ServerSideEncryption;
     /**
-     * Amazon Web Services Key Management Service (KMS) customer Amazon Web Services KMS key ID to use for the default encryption. This parameter is allowed if and only if SSEAlgorithm is set to aws:kms. You can specify the key ID or the Amazon Resource Name (ARN) of the KMS key. If you use a key ID, you can run into a LogDestination undeliverable error when creating a VPC flow log.  If you are using encryption with cross-account or Amazon Web Services service operations you must use a fully qualified KMS key ARN. For more information, see Using encryption for cross-account operations.    Key ID: 1234abcd-12ab-34cd-56ef-1234567890ab    Key ARN: arn:aws:kms:us-east-2:111122223333:key/1234abcd-12ab-34cd-56ef-1234567890ab     Amazon S3 only supports symmetric encryption KMS keys. For more information, see Asymmetric keys in Amazon Web Services KMS in the Amazon Web Services Key Management Service Developer Guide. 
+     * Amazon Web Services Key Management Service (KMS) customer Amazon Web Services KMS key ID to use for the default encryption. This parameter is allowed if and only if SSEAlgorithm is set to aws:kms. You can specify the key ID, key alias, or the Amazon Resource Name (ARN) of the KMS key.   Key ID: 1234abcd-12ab-34cd-56ef-1234567890ab    Key ARN: arn:aws:kms:us-east-2:111122223333:key/1234abcd-12ab-34cd-56ef-1234567890ab    Key Alias: alias/alias-name    If you use a key ID, you can run into a LogDestination undeliverable error when creating a VPC flow log.  If you are using encryption with cross-account or Amazon Web Services service operations you must use a fully qualified KMS key ARN. For more information, see Using encryption for cross-account operations.  Amazon S3 only supports symmetric encryption KMS keys. For more information, see Asymmetric keys in Amazon Web Services KMS in the Amazon Web Services Key Management Service Developer Guide. 
      */
     KMSMasterKeyID?: SSEKMSKeyId;
   }
@@ -6548,7 +6548,7 @@ declare namespace S3 {
      */
     SSECustomerAlgorithm?: SSECustomerAlgorithm;
     /**
-     *  If present, specifies the ID of the Amazon Web Services Key Management Service (Amazon Web Services KMS) symmetric encryption customer managed key that was used for stored in Amazon S3 object. 
+     *  If present, specifies the ID (Key ID, Key ARN, or Key Alias) of the Amazon Web Services Key Management Service (Amazon Web Services KMS) symmetric encryption customer managed key that was used for stored in Amazon S3 object. 
      */
     SSEKMSKeyId?: SSEKMSKeyId;
     /**