cdk-lambda-subminute 2.0.238 → 2.0.239

package/node_modules/aws-sdk/clients/appstream.d.ts

@@ -986,11 +986,7 @@ declare namespace AppStream {
     /**
      * The desired number of streaming instances.
      */
-    DesiredInstances?: Integer;
-    /**
-     * The desired number of user sessions for a multi-session fleet. This is not allowed for single-session fleets. When you create a fleet, you must set either the DesiredSessions or DesiredInstances attribute, based on the type of fleet you create. You can’t define both attributes or leave both attributes blank.
-     */
-    DesiredSessions?: Integer;
+    DesiredInstances: Integer;
   }
   export interface ComputeCapacityStatus {
     /**
@@ -1009,22 +1005,6 @@ declare namespace AppStream {
      * The number of currently available instances that can be used to stream sessions.
      */
     Available?: Integer;
-    /**
-     * The total number of sessions slots that are either running or pending. This represents the total number of concurrent streaming sessions your fleet can support in a steady state. DesiredUserSessionCapacity = ActualUserSessionCapacity + PendingUserSessionCapacity This only applies to multi-session fleets.
-     */
-    DesiredUserSessions?: Integer;
-    /**
-     * The number of idle session slots currently available for user sessions. AvailableUserSessionCapacity = ActualUserSessionCapacity - ActiveUserSessions This only applies to multi-session fleets.
-     */
-    AvailableUserSessions?: Integer;
-    /**
-     * The number of user sessions currently being used for streaming sessions. This only applies to multi-session fleets.
-     */
-    ActiveUserSessions?: Integer;
-    /**
-     * The total number of session slots that are available for streaming or are currently streaming. ActualUserSessionCapacity = AvailableUserSessionCapacity + ActiveUserSessions This only applies to multi-session fleets.
-     */
-    ActualUserSessions?: Integer;
   }
   export interface CopyImageRequest {
     /**
@@ -1286,7 +1266,7 @@ declare namespace AppStream {
      */
     VpcConfig?: VpcConfig;
     /**
-     * The maximum amount of time that a streaming session can remain active, in seconds. If users are still connected to a streaming instance five minutes before this limit is reached, they are prompted to save any open documents before being disconnected. After this time elapses, the instance is terminated and replaced by a new instance. Specify a value between 600 and 432000.
+     * The maximum amount of time that a streaming session can remain active, in seconds. If users are still connected to a streaming instance five minutes before this limit is reached, they are prompted to save any open documents before being disconnected. After this time elapses, the instance is terminated and replaced by a new instance. Specify a value between 600 and 360000.
      */
     MaxUserDurationInSeconds?: Integer;
     /**
@@ -1341,10 +1321,6 @@ declare namespace AppStream {
      * The S3 location of the session scripts configuration zip file. This only applies to Elastic fleets.
      */
     SessionScriptS3Location?: S3Location;
-    /**
-     * The maximum number of user sessions on an instance. This only applies to multi-session fleets.
-     */
-    MaxSessionsPerInstance?: Integer;
   }
   export interface CreateFleetResult {
     /**
@@ -1998,11 +1974,11 @@ declare namespace AppStream {
     /**
      * The name of the stack. This value is case-sensitive.
      */
-    StackName: Name;
+    StackName: String;
     /**
      * The name of the fleet. This value is case-sensitive.
      */
-    FleetName: Name;
+    FleetName: String;
     /**
      * The user identifier (ID). If you specify a user ID, you must also specify the authentication type.
      */
@@ -2019,10 +1995,6 @@ declare namespace AppStream {
      * The authentication method. Specify API for a user authenticated using a streaming URL or SAML for a SAML federated user. The default is to authenticate users using a streaming URL.
      */
     AuthenticationType?: AuthenticationType;
-    /**
-     * The identifier for the instance hosting the session.
-     */
-    InstanceId?: String;
   }
   export interface DescribeSessionsResult {
     /**
@@ -2413,12 +2385,8 @@ declare namespace AppStream {
      * The S3 location of the session scripts configuration zip file. This only applies to Elastic fleets.
      */
     SessionScriptS3Location?: S3Location;
-    /**
-     * The maximum number of user sessions on an instance. This only applies to multi-session fleets.
-     */
-    MaxSessionsPerInstance?: Integer;
   }
-  export type FleetAttribute = "VPC_CONFIGURATION"|"VPC_CONFIGURATION_SECURITY_GROUP_IDS"|"DOMAIN_JOIN_INFO"|"IAM_ROLE_ARN"|"USB_DEVICE_FILTER_STRINGS"|"SESSION_SCRIPT_S3_LOCATION"|"MAX_SESSIONS_PER_INSTANCE"|string;
+  export type FleetAttribute = "VPC_CONFIGURATION"|"VPC_CONFIGURATION_SECURITY_GROUP_IDS"|"DOMAIN_JOIN_INFO"|"IAM_ROLE_ARN"|"USB_DEVICE_FILTER_STRINGS"|"SESSION_SCRIPT_S3_LOCATION"|string;
   export type FleetAttributes = FleetAttribute[];
   export interface FleetError {
     /**
@@ -2826,10 +2794,6 @@ declare namespace AppStream {
      * The network details for the streaming session.
      */
     NetworkAccessConfiguration?: NetworkAccessConfiguration;
-    /**
-     * The identifier for the instance hosting the session.
-     */
-    InstanceId?: String;
   }
   export type SessionConnectionState = "CONNECTED"|"NOT_CONNECTED"|string;
   export type SessionList = Session[];
@@ -3187,7 +3151,7 @@ declare namespace AppStream {
     /**
      * A unique name for the fleet.
      */
-    Name?: Name;
+    Name?: String;
     /**
      * The instance type to use when launching fleet instances. The following instance types are available:   stream.standard.small   stream.standard.medium   stream.standard.large   stream.standard.xlarge   stream.standard.2xlarge   stream.compute.large   stream.compute.xlarge   stream.compute.2xlarge   stream.compute.4xlarge   stream.compute.8xlarge   stream.memory.large   stream.memory.xlarge   stream.memory.2xlarge   stream.memory.4xlarge   stream.memory.8xlarge   stream.memory.z1d.large   stream.memory.z1d.xlarge   stream.memory.z1d.2xlarge   stream.memory.z1d.3xlarge   stream.memory.z1d.6xlarge   stream.memory.z1d.12xlarge   stream.graphics-design.large   stream.graphics-design.xlarge   stream.graphics-design.2xlarge   stream.graphics-design.4xlarge   stream.graphics-desktop.2xlarge   stream.graphics.g4dn.xlarge   stream.graphics.g4dn.2xlarge   stream.graphics.g4dn.4xlarge   stream.graphics.g4dn.8xlarge   stream.graphics.g4dn.12xlarge   stream.graphics.g4dn.16xlarge   stream.graphics-pro.4xlarge   stream.graphics-pro.8xlarge   stream.graphics-pro.16xlarge   The following instance types are available for Elastic fleets:   stream.standard.small   stream.standard.medium   stream.standard.large   stream.standard.xlarge   stream.standard.2xlarge  
      */
@@ -3260,10 +3224,6 @@ declare namespace AppStream {
      * The S3 location of the session scripts configuration zip file. This only applies to Elastic fleets. 
      */
     SessionScriptS3Location?: S3Location;
-    /**
-     * The maximum number of user sessions on an instance. This only applies to multi-session fleets.
-     */
-    MaxSessionsPerInstance?: Integer;
   }
   export interface UpdateFleetResult {
     /**

package/node_modules/aws-sdk/clients/connect.d.ts

@@ -4639,7 +4639,7 @@ declare namespace Connect {
     Name: EventBridgeActionName;
   }
   export type EventBridgeActionName = string;
-  export type EventSourceName = "OnPostCallAnalysisAvailable"|"OnRealTimeCallAnalysisAvailable"|"OnPostChatAnalysisAvailable"|"OnZendeskTicketCreate"|"OnZendeskTicketStatusUpdate"|"OnSalesforceCaseCreate"|"OnContactEvaluationSubmit"|string;
+  export type EventSourceName = "OnPostCallAnalysisAvailable"|"OnRealTimeCallAnalysisAvailable"|"OnPostChatAnalysisAvailable"|"OnZendeskTicketCreate"|"OnZendeskTicketStatusUpdate"|"OnSalesforceCaseCreate"|"OnContactEvaluationSubmit"|"OnMetricDataUpdate"|string;
   export interface FilterV2 {
     /**
      * The key to use for filtering data. For example, QUEUE, ROUTING_PROFILE, AGENT, CHANNEL, AGENT_HIERARCHY_LEVEL_ONE, AGENT_HIERARCHY_LEVEL_TWO, AGENT_HIERARCHY_LEVEL_THREE, AGENT_HIERARCHY_LEVEL_FOUR, AGENT_HIERARCHY_LEVEL_FIVE. There must be at least 1 key and a maximum 5 keys. 

package/node_modules/aws-sdk/clients/datasync.d.ts

@@ -300,11 +300,11 @@ declare class DataSync extends Service {
    */
   describeTaskExecution(callback?: (err: AWSError, data: DataSync.Types.DescribeTaskExecutionResponse) => void): Request<DataSync.Types.DescribeTaskExecutionResponse, AWSError>;
   /**
-   * Creates recommendations about where to migrate your data to in Amazon Web Services. Recommendations are generated based on information that DataSync Discovery collects about your on-premises storage system's resources. For more information, see Recommendations provided by DataSync Discovery. Once generated, you can view your recommendations by using the DescribeStorageSystemResources operation.  If your discovery job completes successfully, you don't need to use this operation. DataSync Discovery generates the recommendations for you automatically. 
+   * Creates recommendations about where to migrate your data to in Amazon Web Services. Recommendations are generated based on information that DataSync Discovery collects about your on-premises storage system's resources. For more information, see Recommendations provided by DataSync Discovery. Once generated, you can view your recommendations by using the DescribeStorageSystemResources operation.
    */
   generateRecommendations(params: DataSync.Types.GenerateRecommendationsRequest, callback?: (err: AWSError, data: DataSync.Types.GenerateRecommendationsResponse) => void): Request<DataSync.Types.GenerateRecommendationsResponse, AWSError>;
   /**
-   * Creates recommendations about where to migrate your data to in Amazon Web Services. Recommendations are generated based on information that DataSync Discovery collects about your on-premises storage system's resources. For more information, see Recommendations provided by DataSync Discovery. Once generated, you can view your recommendations by using the DescribeStorageSystemResources operation.  If your discovery job completes successfully, you don't need to use this operation. DataSync Discovery generates the recommendations for you automatically. 
+   * Creates recommendations about where to migrate your data to in Amazon Web Services. Recommendations are generated based on information that DataSync Discovery collects about your on-premises storage system's resources. For more information, see Recommendations provided by DataSync Discovery. Once generated, you can view your recommendations by using the DescribeStorageSystemResources operation.
    */
   generateRecommendations(callback?: (err: AWSError, data: DataSync.Types.GenerateRecommendationsResponse) => void): Request<DataSync.Types.GenerateRecommendationsResponse, AWSError>;
   /**
@@ -2618,7 +2618,7 @@ declare namespace DataSync {
      */
     Transferred?: ReportOverride;
     /**
-     * Specifies the level of reporting for the files, objects, and directories that DataSync attempted to verify at the end of your transfer. This only applies if you configure your task to verify data during and after the transfer (which DataSync does by default).
+     * Specifies the level of reporting for the files, objects, and directories that DataSync attempted to verify at the end of your transfer.
      */
     Verified?: ReportOverride;
     /**

package/node_modules/aws-sdk/clients/sagemaker.d.ts

@@ -3692,7 +3692,7 @@ declare namespace SageMaker {
   export type CapacitySizeValue = number;
   export interface CaptureContentTypeHeader {
     /**
-     * The list of all content type headers that SageMaker will treat as CSV and capture accordingly.
+     * The list of all content type headers that Amazon SageMaker will treat as CSV and capture accordingly.
      */
     CsvContentTypes?: CsvContentTypes;
     /**
@@ -4621,7 +4621,7 @@ declare namespace SageMaker {
     RoleArn: RoleArn;
     StoppingCondition?: MonitoringStoppingCondition;
     /**
-     * (Optional) An array of key-value pairs. For more information, see Using Cost Allocation Tags in the Amazon Web Services Billing and Cost Management User Guide.
+     * (Optional) An array of key-value pairs. For more information, see  Using Cost Allocation Tags in the Amazon Web Services Billing and Cost Management User Guide.
      */
     Tags?: TagList;
   }
@@ -5285,7 +5285,7 @@ declare namespace SageMaker {
     RoleArn: RoleArn;
     StoppingCondition?: MonitoringStoppingCondition;
     /**
-     * (Optional) An array of key-value pairs. For more information, see Using Cost Allocation Tags in the Amazon Web Services Billing and Cost Management User Guide.
+     * (Optional) An array of key-value pairs. For more information, see  Using Cost Allocation Tags in the Amazon Web Services Billing and Cost Management User Guide.
      */
     Tags?: TagList;
   }
@@ -5376,7 +5376,7 @@ declare namespace SageMaker {
     RoleArn: RoleArn;
     StoppingCondition?: MonitoringStoppingCondition;
     /**
-     * (Optional) An array of key-value pairs. For more information, see Using Cost Allocation Tags in the Amazon Web Services Billing and Cost Management User Guide.
+     * (Optional) An array of key-value pairs. For more information, see  Using Cost Allocation Tags in the Amazon Web Services Billing and Cost Management User Guide.
      */
     Tags?: TagList;
   }
@@ -5516,6 +5516,10 @@ declare namespace SageMaker {
      * An array of additional Inference Specification objects. Each additional Inference Specification specifies artifacts based on this model package that can be used on inference endpoints. Generally used with SageMaker Neo to store the compiled artifacts. 
      */
     AdditionalInferenceSpecifications?: AdditionalInferenceSpecifications;
+    /**
+     * Indicates if you want to skip model validation.
+     */
+    SkipModelValidation?: SkipModelValidation;
   }
   export interface CreateModelPackageOutput {
     /**
@@ -5552,7 +5556,7 @@ declare namespace SageMaker {
     RoleArn: RoleArn;
     StoppingCondition?: MonitoringStoppingCondition;
     /**
-     * (Optional) An array of key-value pairs. For more information, see Using Cost Allocation Tags in the Amazon Web Services Billing and Cost Management User Guide.
+     * (Optional) An array of key-value pairs. For more information, see  Using Cost Allocation Tags in the Amazon Web Services Billing and Cost Management User Guide.
      */
     Tags?: TagList;
   }
@@ -6246,7 +6250,7 @@ declare namespace SageMaker {
      */
     DestinationS3Uri: DestinationS3Uri;
     /**
-     * The Amazon Resource Name (ARN) of a Amazon Web Services Key Management Service key that SageMaker uses to encrypt the captured data at rest using Amazon S3 server-side encryption. The KmsKeyId can be any of the following formats:    Key ID: 1234abcd-12ab-34cd-56ef-1234567890ab    Key ARN: arn:aws:kms:us-west-2:111122223333:key/1234abcd-12ab-34cd-56ef-1234567890ab    Alias name: alias/ExampleAlias    Alias name ARN: arn:aws:kms:us-west-2:111122223333:alias/ExampleAlias   
+     * The Amazon Resource Name (ARN) of an Key Management Service key that SageMaker uses to encrypt the captured data at rest using Amazon S3 server-side encryption. The KmsKeyId can be any of the following formats:    Key ID: 1234abcd-12ab-34cd-56ef-1234567890ab    Key ARN: arn:aws:kms:us-west-2:111122223333:key/1234abcd-12ab-34cd-56ef-1234567890ab    Alias name: alias/ExampleAlias    Alias name ARN: arn:aws:kms:us-west-2:111122223333:alias/ExampleAlias   
      */
     KmsKeyId?: KmsKeyId;
     /**
@@ -6325,7 +6329,7 @@ declare namespace SageMaker {
      */
     ContainerArguments?: MonitoringContainerArguments;
     /**
-     * An Amazon S3 URI to a script that is called per row prior to running analysis. It can base64 decode the payload and convert it into a flatted json so that the built-in container can use the converted data. Applicable only for the built-in (first party) containers.
+     * An Amazon S3 URI to a script that is called per row prior to running analysis. It can base64 decode the payload and convert it into a flattened JSON so that the built-in container can use the converted data. Applicable only for the built-in (first party) containers.
      */
     RecordPreprocessorSourceUri?: S3Uri;
     /**
@@ -8884,7 +8888,7 @@ declare namespace SageMaker {
      */
     NetworkConfig?: MonitoringNetworkConfig;
     /**
-     * The Amazon Resource Name (ARN) of the Amazon Web Services Identity and Access Management (IAM) role that has read permission to the input data location and write permission to the output data location in Amazon S3.
+     * The Amazon Resource Name (ARN) of the IAM role that has read permission to the input data location and write permission to the output data location in Amazon S3.
      */
     RoleArn: RoleArn;
     StoppingCondition?: MonitoringStoppingCondition;
@@ -9025,7 +9029,7 @@ declare namespace SageMaker {
      */
     NetworkConfig?: MonitoringNetworkConfig;
     /**
-     * The Amazon Resource Name (ARN) of the Amazon Web Services Identity and Access Management (IAM) role that has read permission to the input data location and write permission to the output data location in Amazon S3.
+     * The Amazon Resource Name (ARN) of the IAM role that has read permission to the input data location and write permission to the output data location in Amazon S3.
      */
     RoleArn: RoleArn;
     StoppingCondition?: MonitoringStoppingCondition;
@@ -9205,6 +9209,10 @@ declare namespace SageMaker {
      * An array of additional Inference Specification objects. Each additional Inference Specification specifies artifacts based on this model package that can be used on inference endpoints. Generally used with SageMaker Neo to store the compiled artifacts.
      */
     AdditionalInferenceSpecifications?: AdditionalInferenceSpecifications;
+    /**
+     * Indicates if you want to skip model validation.
+     */
+    SkipModelValidation?: SkipModelValidation;
   }
   export interface DescribeModelQualityJobDefinitionRequest {
     /**
@@ -10924,7 +10932,7 @@ declare namespace SageMaker {
      */
     S3InputMode?: ProcessingS3InputMode;
     /**
-     * Whether input data distributed in Amazon S3 is fully replicated or sharded by an S3 key. Defaults to FullyReplicated 
+     * Whether input data distributed in Amazon S3 is fully replicated or sharded by an Amazon S3 key. Defaults to FullyReplicated 
      */
     S3DataDistributionType?: ProcessingS3DataDistributionType;
     /**
@@ -13674,7 +13682,7 @@ declare namespace SageMaker {
      */
     SortBy?: MonitoringJobDefinitionSortKey;
     /**
-     * The sort order for results. The default is Descending.
+     * Whether to sort the results in Ascending or Descending order. The default is Descending.
      */
     SortOrder?: SortOrder;
     /**
@@ -14787,7 +14795,7 @@ declare namespace SageMaker {
      */
     JobDefinitionSummaries: MonitoringJobDefinitionSummaryList;
     /**
-     * If the response is truncated, Amazon SageMaker returns this token. To retrieve the next set of jobs, use it in the subsequent request.
+     * The token returned if the response is truncated. To retrieve the next set of job executions, use it in the next request.
      */
     NextToken?: NextToken;
   }
@@ -14971,7 +14979,7 @@ declare namespace SageMaker {
      */
     JobDefinitionSummaries: MonitoringJobDefinitionSummaryList;
     /**
-     * If the response is truncated, Amazon SageMaker returns this token. To retrieve the next set of jobs, use it in the subsequent request.
+     * The token returned if the response is truncated. To retrieve the next set of job executions, use it in the next request.
      */
     NextToken?: NextToken;
   }
@@ -15101,7 +15109,7 @@ declare namespace SageMaker {
      */
     SortBy?: MonitoringJobDefinitionSortKey;
     /**
-     * The sort order for results. The default is Descending.
+     * Whether to sort the results in Ascending or Descending order. The default is Descending.
      */
     SortOrder?: SortOrder;
     /**
@@ -15257,7 +15265,7 @@ declare namespace SageMaker {
      */
     EndpointName?: EndpointName;
     /**
-     * Whether to sort results by Status, CreationTime, ScheduledTime field. The default is CreationTime.
+     * Whether to sort the results by the Status, CreationTime, or ScheduledTime field. The default is CreationTime.
      */
     SortBy?: MonitoringExecutionSortKey;
     /**
@@ -15315,7 +15323,7 @@ declare namespace SageMaker {
      */
     MonitoringExecutionSummaries: MonitoringExecutionSummaryList;
     /**
-     * If the response is truncated, Amazon SageMaker returns this token. To retrieve the next set of jobs, use it in the subsequent reques
+     * The token returned if the response is truncated. To retrieve the next set of job executions, use it in the next request.
      */
     NextToken?: NextToken;
   }
@@ -15325,7 +15333,7 @@ declare namespace SageMaker {
      */
     EndpointName?: EndpointName;
     /**
-     * Whether to sort results by Status, CreationTime, ScheduledTime field. The default is CreationTime.
+     * Whether to sort the results by the Status, CreationTime, or ScheduledTime field. The default is CreationTime.
      */
     SortBy?: MonitoringScheduleSortKey;
     /**
@@ -15379,7 +15387,7 @@ declare namespace SageMaker {
      */
     MonitoringScheduleSummaries: MonitoringScheduleSummaryList;
     /**
-     * If the response is truncated, Amazon SageMaker returns this token. To retrieve the next set of jobs, use it in the subsequent request.
+     * The token returned if the response is truncated. To retrieve the next set of job executions, use it in the next request.
      */
     NextToken?: NextToken;
   }
@@ -16836,7 +16844,7 @@ declare namespace SageMaker {
      */
     ImageUri: ImageUri;
     /**
-     * JSON formatted S3 file that defines explainability parameters. For more information on this JSON configuration file, see Configure model explainability parameters.
+     * JSON formatted Amazon S3 file that defines explainability parameters. For more information on this JSON configuration file, see Configure model explainability parameters.
      */
     ConfigUri: S3Uri;
     /**
@@ -17053,6 +17061,10 @@ declare namespace SageMaker {
      * Represents the drift check baselines that can be used when the model monitor is set using the model package.
      */
     DriftCheckBaselines?: DriftCheckBaselines;
+    /**
+     * Indicates if you want to skip model validation.
+     */
+    SkipModelValidation?: SkipModelValidation;
   }
   export type ModelPackageArn = string;
   export type ModelPackageArnList = ModelPackageArn[];
@@ -17263,7 +17275,7 @@ declare namespace SageMaker {
      */
     ContainerArguments?: MonitoringContainerArguments;
     /**
-     * An Amazon S3 URI to a script that is called per row prior to running analysis. It can base64 decode the payload and convert it into a flatted json so that the built-in container can use the converted data. Applicable only for the built-in (first party) containers.
+     * An Amazon S3 URI to a script that is called per row prior to running analysis. It can base64 decode the payload and convert it into a flattened JSON so that the built-in container can use the converted data. Applicable only for the built-in (first party) containers.
      */
     RecordPreprocessorSourceUri?: S3Uri;
     /**
@@ -17441,7 +17453,7 @@ declare namespace SageMaker {
      */
     ContainerArguments?: MonitoringContainerArguments;
     /**
-     * An Amazon S3 URI to a script that is called per row prior to running analysis. It can base64 decode the payload and convert it into a flatted json so that the built-in container can use the converted data. Applicable only for the built-in (first party) containers.
+     * An Amazon S3 URI to a script that is called per row prior to running analysis. It can base64 decode the payload and convert it into a flattened JSON so that the built-in container can use the converted data. Applicable only for the built-in (first party) containers.
      */
     RecordPreprocessorSourceUri?: S3Uri;
     /**
@@ -17477,7 +17489,7 @@ declare namespace SageMaker {
      */
     VolumeSizeInGB: ProcessingVolumeSizeInGB;
     /**
-     * The Amazon Web Services Key Management Service (Amazon Web Services KMS) key that Amazon SageMaker uses to encrypt data on the storage volume attached to the ML compute instance(s) that run the model monitoring job.
+     * The Key Management Service (KMS) key that Amazon SageMaker uses to encrypt data on the storage volume attached to the ML compute instance(s) that run the model monitoring job.
      */
     VolumeKmsKeyId?: KmsKeyId;
   }
@@ -17582,7 +17594,7 @@ declare namespace SageMaker {
      */
     MonitoringInputs: MonitoringInputs;
     /**
-     * The array of outputs from the monitoring job to be uploaded to Amazon Simple Storage Service (Amazon S3).
+     * The array of outputs from the monitoring job to be uploaded to Amazon S3.
      */
     MonitoringOutputConfig: MonitoringOutputConfig;
     /**
@@ -17634,7 +17646,7 @@ declare namespace SageMaker {
   export type MonitoringJobDefinitionSummaryList = MonitoringJobDefinitionSummary[];
   export interface MonitoringJsonDatasetFormat {
     /**
-     * Indicates if the file should be read as a json object per line. 
+     * Indicates if the file should be read as a JSON object per line. 
      */
     Line?: Boolean;
   }
@@ -17662,7 +17674,7 @@ declare namespace SageMaker {
      */
     MonitoringOutputs: MonitoringOutputs;
     /**
-     * The Amazon Web Services Key Management Service (Amazon Web Services KMS) key that Amazon SageMaker uses to encrypt the model artifacts at rest using Amazon S3 server-side encryption.
+     * The Key Management Service (KMS) key that Amazon SageMaker uses to encrypt the model artifacts at rest using Amazon S3 server-side encryption.
      */
     KmsKeyId?: KmsKeyId;
   }
@@ -20264,6 +20276,7 @@ declare namespace SageMaker {
     Seed: Seed;
   }
   export type SingleSignOnUserIdentifier = string;
+  export type SkipModelValidation = "All"|"None"|string;
   export type SnsTopicArn = string;
   export type SortActionsBy = "Name"|"CreationTime"|string;
   export type SortArtifactsBy = "CreationTime"|string;

package/node_modules/aws-sdk/dist/aws-sdk-core-react-native.js

@@ -83,7 +83,7 @@ return /******/ (function(modules) { // webpackBootstrap
 	  /**
 	   * @constant
 	   */
-	  VERSION: '2.1458.0',
+	  VERSION: '2.1459.0',
 
 	  /**
 	   * @api private