cdk-docker-image-deployment 0.0.87 → 0.0.88

package/node_modules/aws-sdk/clients/cloudwatch.d.ts

@@ -13,11 +13,11 @@ declare class CloudWatch extends Service {
   constructor(options?: CloudWatch.Types.ClientConfiguration)
   config: Config & CloudWatch.Types.ClientConfiguration;
   /**
-   * Deletes the specified alarms. You can delete up to 100 alarms in one operation. However, this total can include no more than one composite alarm. For example, you could delete 99 metric alarms and one composite alarms with one operation, but you can't delete two composite alarms with one operation.  In the event of an error, no alarms are deleted.  It is possible to create a loop or cycle of composite alarms, where composite alarm A depends on composite alarm B, and composite alarm B also depends on composite alarm A. In this scenario, you can't delete any composite alarm that is part of the cycle because there is always still a composite alarm that depends on that alarm that you want to delete. To get out of such a situation, you must break the cycle by changing the rule of one of the composite alarms in the cycle to remove a dependency that creates the cycle. The simplest change to make to break a cycle is to change the AlarmRule of one of the alarms to False.  Additionally, the evaluation of composite alarms stops if CloudWatch detects a cycle in the evaluation path.  
+   * Deletes the specified alarms. You can delete up to 100 alarms in one operation. However, this total can include no more than one composite alarm. For example, you could delete 99 metric alarms and one composite alarms with one operation, but you can't delete two composite alarms with one operation.  In the event of an error, no alarms are deleted.  It is possible to create a loop or cycle of composite alarms, where composite alarm A depends on composite alarm B, and composite alarm B also depends on composite alarm A. In this scenario, you can't delete any composite alarm that is part of the cycle because there is always still a composite alarm that depends on that alarm that you want to delete. To get out of such a situation, you must break the cycle by changing the rule of one of the composite alarms in the cycle to remove a dependency that creates the cycle. The simplest change to make to break a cycle is to change the AlarmRule of one of the alarms to false.  Additionally, the evaluation of composite alarms stops if CloudWatch detects a cycle in the evaluation path.  
    */
   deleteAlarms(params: CloudWatch.Types.DeleteAlarmsInput, callback?: (err: AWSError, data: {}) => void): Request<{}, AWSError>;
   /**
-   * Deletes the specified alarms. You can delete up to 100 alarms in one operation. However, this total can include no more than one composite alarm. For example, you could delete 99 metric alarms and one composite alarms with one operation, but you can't delete two composite alarms with one operation.  In the event of an error, no alarms are deleted.  It is possible to create a loop or cycle of composite alarms, where composite alarm A depends on composite alarm B, and composite alarm B also depends on composite alarm A. In this scenario, you can't delete any composite alarm that is part of the cycle because there is always still a composite alarm that depends on that alarm that you want to delete. To get out of such a situation, you must break the cycle by changing the rule of one of the composite alarms in the cycle to remove a dependency that creates the cycle. The simplest change to make to break a cycle is to change the AlarmRule of one of the alarms to False.  Additionally, the evaluation of composite alarms stops if CloudWatch detects a cycle in the evaluation path.  
+   * Deletes the specified alarms. You can delete up to 100 alarms in one operation. However, this total can include no more than one composite alarm. For example, you could delete 99 metric alarms and one composite alarms with one operation, but you can't delete two composite alarms with one operation.  In the event of an error, no alarms are deleted.  It is possible to create a loop or cycle of composite alarms, where composite alarm A depends on composite alarm B, and composite alarm B also depends on composite alarm A. In this scenario, you can't delete any composite alarm that is part of the cycle because there is always still a composite alarm that depends on that alarm that you want to delete. To get out of such a situation, you must break the cycle by changing the rule of one of the composite alarms in the cycle to remove a dependency that creates the cycle. The simplest change to make to break a cycle is to change the AlarmRule of one of the alarms to false.  Additionally, the evaluation of composite alarms stops if CloudWatch detects a cycle in the evaluation path.  
    */
   deleteAlarms(callback?: (err: AWSError, data: {}) => void): Request<{}, AWSError>;
   /**
@@ -197,11 +197,11 @@ declare class CloudWatch extends Service {
    */
   listMetricStreams(callback?: (err: AWSError, data: CloudWatch.Types.ListMetricStreamsOutput) => void): Request<CloudWatch.Types.ListMetricStreamsOutput, AWSError>;
   /**
-   * List the specified metrics. You can use the returned metrics with GetMetricData or GetMetricStatistics to obtain statistical data. Up to 500 results are returned for any one call. To retrieve additional results, use the returned token with subsequent calls. After you create a metric, allow up to 15 minutes before the metric appears. You can see statistics about the metric sooner by using GetMetricData or GetMetricStatistics.  ListMetrics doesn't return information about metrics if those metrics haven't reported data in the past two weeks. To retrieve those metrics, use GetMetricData or GetMetricStatistics.
+   * List the specified metrics. You can use the returned metrics with GetMetricData or GetMetricStatistics to get statistical data. Up to 500 results are returned for any one call. To retrieve additional results, use the returned token with subsequent calls. After you create a metric, allow up to 15 minutes for the metric to appear. To see metric statistics sooner, use GetMetricData or GetMetricStatistics. If you are using CloudWatch cross-account observability, you can use this operation in a monitoring account and view metrics from the linked source accounts. For more information, see CloudWatch cross-account observability.  ListMetrics doesn't return information about metrics if those metrics haven't reported data in the past two weeks. To retrieve those metrics, use GetMetricData or GetMetricStatistics.
    */
   listMetrics(params: CloudWatch.Types.ListMetricsInput, callback?: (err: AWSError, data: CloudWatch.Types.ListMetricsOutput) => void): Request<CloudWatch.Types.ListMetricsOutput, AWSError>;
   /**
-   * List the specified metrics. You can use the returned metrics with GetMetricData or GetMetricStatistics to obtain statistical data. Up to 500 results are returned for any one call. To retrieve additional results, use the returned token with subsequent calls. After you create a metric, allow up to 15 minutes before the metric appears. You can see statistics about the metric sooner by using GetMetricData or GetMetricStatistics.  ListMetrics doesn't return information about metrics if those metrics haven't reported data in the past two weeks. To retrieve those metrics, use GetMetricData or GetMetricStatistics.
+   * List the specified metrics. You can use the returned metrics with GetMetricData or GetMetricStatistics to get statistical data. Up to 500 results are returned for any one call. To retrieve additional results, use the returned token with subsequent calls. After you create a metric, allow up to 15 minutes for the metric to appear. To see metric statistics sooner, use GetMetricData or GetMetricStatistics. If you are using CloudWatch cross-account observability, you can use this operation in a monitoring account and view metrics from the linked source accounts. For more information, see CloudWatch cross-account observability.  ListMetrics doesn't return information about metrics if those metrics haven't reported data in the past two weeks. To retrieve those metrics, use GetMetricData or GetMetricStatistics.
    */
   listMetrics(callback?: (err: AWSError, data: CloudWatch.Types.ListMetricsOutput) => void): Request<CloudWatch.Types.ListMetricsOutput, AWSError>;
   /**
@@ -221,11 +221,11 @@ declare class CloudWatch extends Service {
    */
   putAnomalyDetector(callback?: (err: AWSError, data: CloudWatch.Types.PutAnomalyDetectorOutput) => void): Request<CloudWatch.Types.PutAnomalyDetectorOutput, AWSError>;
   /**
-   * Creates or updates a composite alarm. When you create a composite alarm, you specify a rule expression for the alarm that takes into account the alarm states of other alarms that you have created. The composite alarm goes into ALARM state only if all conditions of the rule are met. The alarms specified in a composite alarm's rule expression can include metric alarms and other composite alarms. The rule expression of a composite alarm can include as many as 100 underlying alarms. Any single alarm can be included in the rule expressions of as many as 150 composite alarms. Using composite alarms can reduce alarm noise. You can create multiple metric alarms, and also create a composite alarm and set up alerts only for the composite alarm. For example, you could create a composite alarm that goes into ALARM state only when more than one of the underlying metric alarms are in ALARM state. Currently, the only alarm actions that can be taken by composite alarms are notifying SNS topics.  It is possible to create a loop or cycle of composite alarms, where composite alarm A depends on composite alarm B, and composite alarm B also depends on composite alarm A. In this scenario, you can't delete any composite alarm that is part of the cycle because there is always still a composite alarm that depends on that alarm that you want to delete. To get out of such a situation, you must break the cycle by changing the rule of one of the composite alarms in the cycle to remove a dependency that creates the cycle. The simplest change to make to break a cycle is to change the AlarmRule of one of the alarms to False.  Additionally, the evaluation of composite alarms stops if CloudWatch detects a cycle in the evaluation path.   When this operation creates an alarm, the alarm state is immediately set to INSUFFICIENT_DATA. The alarm is then evaluated and its state is set appropriately. Any actions associated with the new state are then executed. For a composite alarm, this initial time after creation is the only time that the alarm can be in INSUFFICIENT_DATA state. When you update an existing alarm, its state is left unchanged, but the update completely overwrites the previous configuration of the alarm. To use this operation, you must be signed on with the cloudwatch:PutCompositeAlarm permission that is scoped to *. You can't create a composite alarms if your cloudwatch:PutCompositeAlarm permission has a narrower scope. If you are an IAM user, you must have iam:CreateServiceLinkedRole to create a composite alarm that has Systems Manager OpsItem actions.
+   * Creates or updates a composite alarm. When you create a composite alarm, you specify a rule expression for the alarm that takes into account the alarm states of other alarms that you have created. The composite alarm goes into ALARM state only if all conditions of the rule are met. The alarms specified in a composite alarm's rule expression can include metric alarms and other composite alarms. The rule expression of a composite alarm can include as many as 100 underlying alarms. Any single alarm can be included in the rule expressions of as many as 150 composite alarms. Using composite alarms can reduce alarm noise. You can create multiple metric alarms, and also create a composite alarm and set up alerts only for the composite alarm. For example, you could create a composite alarm that goes into ALARM state only when more than one of the underlying metric alarms are in ALARM state. Currently, the only alarm actions that can be taken by composite alarms are notifying SNS topics.  It is possible to create a loop or cycle of composite alarms, where composite alarm A depends on composite alarm B, and composite alarm B also depends on composite alarm A. In this scenario, you can't delete any composite alarm that is part of the cycle because there is always still a composite alarm that depends on that alarm that you want to delete. To get out of such a situation, you must break the cycle by changing the rule of one of the composite alarms in the cycle to remove a dependency that creates the cycle. The simplest change to make to break a cycle is to change the AlarmRule of one of the alarms to false.  Additionally, the evaluation of composite alarms stops if CloudWatch detects a cycle in the evaluation path.   When this operation creates an alarm, the alarm state is immediately set to INSUFFICIENT_DATA. The alarm is then evaluated and its state is set appropriately. Any actions associated with the new state are then executed. For a composite alarm, this initial time after creation is the only time that the alarm can be in INSUFFICIENT_DATA state. When you update an existing alarm, its state is left unchanged, but the update completely overwrites the previous configuration of the alarm. To use this operation, you must be signed on with the cloudwatch:PutCompositeAlarm permission that is scoped to *. You can't create a composite alarms if your cloudwatch:PutCompositeAlarm permission has a narrower scope. If you are an IAM user, you must have iam:CreateServiceLinkedRole to create a composite alarm that has Systems Manager OpsItem actions.
    */
   putCompositeAlarm(params: CloudWatch.Types.PutCompositeAlarmInput, callback?: (err: AWSError, data: {}) => void): Request<{}, AWSError>;
   /**
-   * Creates or updates a composite alarm. When you create a composite alarm, you specify a rule expression for the alarm that takes into account the alarm states of other alarms that you have created. The composite alarm goes into ALARM state only if all conditions of the rule are met. The alarms specified in a composite alarm's rule expression can include metric alarms and other composite alarms. The rule expression of a composite alarm can include as many as 100 underlying alarms. Any single alarm can be included in the rule expressions of as many as 150 composite alarms. Using composite alarms can reduce alarm noise. You can create multiple metric alarms, and also create a composite alarm and set up alerts only for the composite alarm. For example, you could create a composite alarm that goes into ALARM state only when more than one of the underlying metric alarms are in ALARM state. Currently, the only alarm actions that can be taken by composite alarms are notifying SNS topics.  It is possible to create a loop or cycle of composite alarms, where composite alarm A depends on composite alarm B, and composite alarm B also depends on composite alarm A. In this scenario, you can't delete any composite alarm that is part of the cycle because there is always still a composite alarm that depends on that alarm that you want to delete. To get out of such a situation, you must break the cycle by changing the rule of one of the composite alarms in the cycle to remove a dependency that creates the cycle. The simplest change to make to break a cycle is to change the AlarmRule of one of the alarms to False.  Additionally, the evaluation of composite alarms stops if CloudWatch detects a cycle in the evaluation path.   When this operation creates an alarm, the alarm state is immediately set to INSUFFICIENT_DATA. The alarm is then evaluated and its state is set appropriately. Any actions associated with the new state are then executed. For a composite alarm, this initial time after creation is the only time that the alarm can be in INSUFFICIENT_DATA state. When you update an existing alarm, its state is left unchanged, but the update completely overwrites the previous configuration of the alarm. To use this operation, you must be signed on with the cloudwatch:PutCompositeAlarm permission that is scoped to *. You can't create a composite alarms if your cloudwatch:PutCompositeAlarm permission has a narrower scope. If you are an IAM user, you must have iam:CreateServiceLinkedRole to create a composite alarm that has Systems Manager OpsItem actions.
+   * Creates or updates a composite alarm. When you create a composite alarm, you specify a rule expression for the alarm that takes into account the alarm states of other alarms that you have created. The composite alarm goes into ALARM state only if all conditions of the rule are met. The alarms specified in a composite alarm's rule expression can include metric alarms and other composite alarms. The rule expression of a composite alarm can include as many as 100 underlying alarms. Any single alarm can be included in the rule expressions of as many as 150 composite alarms. Using composite alarms can reduce alarm noise. You can create multiple metric alarms, and also create a composite alarm and set up alerts only for the composite alarm. For example, you could create a composite alarm that goes into ALARM state only when more than one of the underlying metric alarms are in ALARM state. Currently, the only alarm actions that can be taken by composite alarms are notifying SNS topics.  It is possible to create a loop or cycle of composite alarms, where composite alarm A depends on composite alarm B, and composite alarm B also depends on composite alarm A. In this scenario, you can't delete any composite alarm that is part of the cycle because there is always still a composite alarm that depends on that alarm that you want to delete. To get out of such a situation, you must break the cycle by changing the rule of one of the composite alarms in the cycle to remove a dependency that creates the cycle. The simplest change to make to break a cycle is to change the AlarmRule of one of the alarms to false.  Additionally, the evaluation of composite alarms stops if CloudWatch detects a cycle in the evaluation path.   When this operation creates an alarm, the alarm state is immediately set to INSUFFICIENT_DATA. The alarm is then evaluated and its state is set appropriately. Any actions associated with the new state are then executed. For a composite alarm, this initial time after creation is the only time that the alarm can be in INSUFFICIENT_DATA state. When you update an existing alarm, its state is left unchanged, but the update completely overwrites the previous configuration of the alarm. To use this operation, you must be signed on with the cloudwatch:PutCompositeAlarm permission that is scoped to *. You can't create a composite alarms if your cloudwatch:PutCompositeAlarm permission has a narrower scope. If you are an IAM user, you must have iam:CreateServiceLinkedRole to create a composite alarm that has Systems Manager OpsItem actions.
    */
   putCompositeAlarm(callback?: (err: AWSError, data: {}) => void): Request<{}, AWSError>;
   /**
@@ -269,11 +269,11 @@ declare class CloudWatch extends Service {
    */
   putMetricData(callback?: (err: AWSError, data: {}) => void): Request<{}, AWSError>;
   /**
-   * Creates or updates a metric stream. Metric streams can automatically stream CloudWatch metrics to Amazon Web Services destinations including Amazon S3 and to many third-party solutions. For more information, see  Using Metric Streams. To create a metric stream, you must be logged on to an account that has the iam:PassRole permission and either the CloudWatchFullAccess policy or the cloudwatch:PutMetricStream permission. When you create or update a metric stream, you choose one of the following:   Stream metrics from all metric namespaces in the account.   Stream metrics from all metric namespaces in the account, except for the namespaces that you list in ExcludeFilters.   Stream metrics from only the metric namespaces that you list in IncludeFilters.   By default, a metric stream always sends the MAX, MIN, SUM, and SAMPLECOUNT statistics for each metric that is streamed. You can use the StatisticsConfigurations parameter to have the metric stream also send additional statistics in the stream. Streaming additional statistics incurs additional costs. For more information, see Amazon CloudWatch Pricing.  When you use PutMetricStream to create a new metric stream, the stream is created in the running state. If you use it to update an existing stream, the state of the stream is not changed.
+   * Creates or updates a metric stream. Metric streams can automatically stream CloudWatch metrics to Amazon Web Services destinations, including Amazon S3, and to many third-party solutions. For more information, see  Using Metric Streams. To create a metric stream, you must be signed in to an account that has the iam:PassRole permission and either the CloudWatchFullAccess policy or the cloudwatch:PutMetricStream permission. When you create or update a metric stream, you choose one of the following:   Stream metrics from all metric namespaces in the account.   Stream metrics from all metric namespaces in the account, except for the namespaces that you list in ExcludeFilters.   Stream metrics from only the metric namespaces that you list in IncludeFilters.   By default, a metric stream always sends the MAX, MIN, SUM, and SAMPLECOUNT statistics for each metric that is streamed. You can use the StatisticsConfigurations parameter to have the metric stream send additional statistics in the stream. Streaming additional statistics incurs additional costs. For more information, see Amazon CloudWatch Pricing.  When you use PutMetricStream to create a new metric stream, the stream is created in the running state. If you use it to update an existing stream, the state of the stream is not changed.
    */
   putMetricStream(params: CloudWatch.Types.PutMetricStreamInput, callback?: (err: AWSError, data: CloudWatch.Types.PutMetricStreamOutput) => void): Request<CloudWatch.Types.PutMetricStreamOutput, AWSError>;
   /**
-   * Creates or updates a metric stream. Metric streams can automatically stream CloudWatch metrics to Amazon Web Services destinations including Amazon S3 and to many third-party solutions. For more information, see  Using Metric Streams. To create a metric stream, you must be logged on to an account that has the iam:PassRole permission and either the CloudWatchFullAccess policy or the cloudwatch:PutMetricStream permission. When you create or update a metric stream, you choose one of the following:   Stream metrics from all metric namespaces in the account.   Stream metrics from all metric namespaces in the account, except for the namespaces that you list in ExcludeFilters.   Stream metrics from only the metric namespaces that you list in IncludeFilters.   By default, a metric stream always sends the MAX, MIN, SUM, and SAMPLECOUNT statistics for each metric that is streamed. You can use the StatisticsConfigurations parameter to have the metric stream also send additional statistics in the stream. Streaming additional statistics incurs additional costs. For more information, see Amazon CloudWatch Pricing.  When you use PutMetricStream to create a new metric stream, the stream is created in the running state. If you use it to update an existing stream, the state of the stream is not changed.
+   * Creates or updates a metric stream. Metric streams can automatically stream CloudWatch metrics to Amazon Web Services destinations, including Amazon S3, and to many third-party solutions. For more information, see  Using Metric Streams. To create a metric stream, you must be signed in to an account that has the iam:PassRole permission and either the CloudWatchFullAccess policy or the cloudwatch:PutMetricStream permission. When you create or update a metric stream, you choose one of the following:   Stream metrics from all metric namespaces in the account.   Stream metrics from all metric namespaces in the account, except for the namespaces that you list in ExcludeFilters.   Stream metrics from only the metric namespaces that you list in IncludeFilters.   By default, a metric stream always sends the MAX, MIN, SUM, and SAMPLECOUNT statistics for each metric that is streamed. You can use the StatisticsConfigurations parameter to have the metric stream send additional statistics in the stream. Streaming additional statistics incurs additional costs. For more information, see Amazon CloudWatch Pricing.  When you use PutMetricStream to create a new metric stream, the stream is created in the running state. If you use it to update an existing stream, the state of the stream is not changed.
    */
   putMetricStream(callback?: (err: AWSError, data: CloudWatch.Types.PutMetricStreamOutput) => void): Request<CloudWatch.Types.PutMetricStreamOutput, AWSError>;
   /**
@@ -1095,7 +1095,7 @@ declare namespace CloudWatch {
      */
     ExcludeFilters?: MetricStreamFilters;
     /**
-     * The ARN of the Amazon Kinesis Firehose delivery stream that is used by this metric stream.
+     * The ARN of the Amazon Kinesis Data Firehose delivery stream that is used by this metric stream.
      */
     FirehoseArn?: AmazonResourceName;
     /**
@@ -1142,6 +1142,7 @@ declare namespace CloudWatch {
   export type HistoryData = string;
   export type HistoryItemType = "ConfigurationUpdate"|"StateUpdate"|"Action"|string;
   export type HistorySummary = string;
+  export type IncludeLinkedAccounts = boolean;
   export interface InsightRule {
     /**
      * The name of the rule.
@@ -1337,6 +1338,14 @@ declare namespace CloudWatch {
      * To filter the results to show only metrics that have had data points published in the past three hours, specify this parameter with a value of PT3H. This is the only valid value for this parameter. The results that are returned are an approximation of the value you specify. There is a low probability that the returned results include metrics with last published data as much as 40 minutes more than the specified time interval.
      */
     RecentlyActive?: RecentlyActive;
+    /**
+     * If you are using this operation in a monitoring account, specify true to include metrics from source accounts in the returned data. The default is false.
+     */
+    IncludeLinkedAccounts?: IncludeLinkedAccounts;
+    /**
+     * When you use this operation in a monitoring account, use this field to return metrics only from one source account. To do so, specify that source account ID in this field, and also specify true for IncludeLinkedAccounts.
+     */
+    OwningAccount?: AccountId;
   }
   export interface ListMetricsOutput {
     /**
@@ -1347,6 +1356,10 @@ declare namespace CloudWatch {
      * The token that marks the start of the next batch of returned results. 
      */
     NextToken?: NextToken;
+    /**
+     * If you are using this operation in a monitoring account, this array contains the account IDs of the source accounts where the metrics in the returned data are from. This field is a 1:1 mapping between each metric that is returned and the ID of the owning account.
+     */
+    OwningAccounts?: OwningAccounts;
   }
   export interface ListTagsForResourceInput {
     /**
@@ -1560,7 +1573,7 @@ declare namespace CloudWatch {
      */
     Label?: MetricLabel;
     /**
-     * When used in GetMetricData, this option indicates whether to return the timestamps and raw data values of this metric. If you are performing this call just to do math expressions and do not also need the raw data returned, you can specify False. If you omit this, the default of True is used. When used in PutMetricAlarm, specify True for the one expression result to use as the alarm. For all other metrics and expressions in the same PutMetricAlarm operation, specify ReturnData as False.
+     * When used in GetMetricData, this option indicates whether to return the timestamps and raw data values of this metric. If you are performing this call just to do math expressions and do not also need the raw data returned, you can specify false. If you omit this, the default of true is used. When used in PutMetricAlarm, specify true for the one expression result to use as the alarm. For all other metrics and expressions in the same PutMetricAlarm operation, specify ReturnData as False.
      */
     ReturnData?: ReturnData;
     /**
@@ -1568,7 +1581,7 @@ declare namespace CloudWatch {
      */
     Period?: Period;
     /**
-     * The ID of the account where the metrics are located, if this is a cross-account alarm. Use this field only for PutMetricAlarm operations. It is not used in GetMetricData operations.
+     * The ID of the account where the metrics are located. If you are performing a GetMetricData operation in a monitoring account, use this to specify which account to retrieve this metric from. If you are performing a PutMetricAlarm operation, use this to specify which account contains the metric that the alarm is watching.
      */
     AccountId?: AccountId;
   }
@@ -1643,7 +1656,7 @@ declare namespace CloudWatch {
   export type MetricLabel = string;
   export interface MetricMathAnomalyDetector {
     /**
-     * An array of metric data query structures that enables you to create an anomaly detector based on the result of a metric math expression. Each item in MetricDataQueries gets a metric or performs a math expression. One item in MetricDataQueries is the expression that provides the time series that the anomaly detector uses as input. Designate the expression by setting ReturnData to True for this object in the array. For all other expressions and metrics, set ReturnData to False. The designated expression must return a single time series.
+     * An array of metric data query structures that enables you to create an anomaly detector based on the result of a metric math expression. Each item in MetricDataQueries gets a metric or performs a math expression. One item in MetricDataQueries is the expression that provides the time series that the anomaly detector uses as input. Designate the expression by setting ReturnData to true for this object in the array. For all other expressions and metrics, set ReturnData to false. The designated expression must return a single time series.
      */
     MetricDataQueries?: MetricDataQueries;
   }
@@ -1738,6 +1751,7 @@ declare namespace CloudWatch {
   export type Namespace = string;
   export type NextToken = string;
   export type OutputFormat = string;
+  export type OwningAccounts = AccountId[];
   export interface PartialFailure {
     /**
      * The specified rule that could not be deleted.
@@ -1997,11 +2011,11 @@ declare namespace CloudWatch {
      */
     ExcludeFilters?: MetricStreamFilters;
     /**
-     * The ARN of the Amazon Kinesis Firehose delivery stream to use for this metric stream. This Amazon Kinesis Firehose delivery stream must already exist and must be in the same account as the metric stream.
+     * The ARN of the Amazon Kinesis Data Firehose delivery stream to use for this metric stream. This Amazon Kinesis Data Firehose delivery stream must already exist and must be in the same account as the metric stream.
      */
     FirehoseArn: AmazonResourceName;
     /**
-     * The ARN of an IAM role that this metric stream will use to access Amazon Kinesis Firehose resources. This IAM role must already exist and must be in the same account as the metric stream. This IAM role must include the following permissions:   firehose:PutRecord   firehose:PutRecordBatch  
+     * The ARN of an IAM role that this metric stream will use to access Amazon Kinesis Data Firehose resources. This IAM role must already exist and must be in the same account as the metric stream. This IAM role must include the following permissions:   firehose:PutRecord   firehose:PutRecordBatch  
      */
     RoleArn: AmazonResourceName;
     /**
@@ -2013,7 +2027,7 @@ declare namespace CloudWatch {
      */
     Tags?: TagList;
     /**
-     * By default, a metric stream always sends the MAX, MIN, SUM, and SAMPLECOUNT statistics for each metric that is streamed. You can use this parameter to have the metric stream also send additional statistics in the stream. This array can have up to 100 members. For each entry in this array, you specify one or more metrics and the list of additional statistics to stream for those metrics. The additional statistics that you can stream depend on the stream's OutputFormat. If the OutputFormat is json, you can stream any additional statistic that is supported by CloudWatch, listed in  CloudWatch statistics definitions. If the OutputFormat is opentelemetry0.7, you can stream percentile statistics such as p95, p99.9 and so on.
+     * By default, a metric stream always sends the MAX, MIN, SUM, and SAMPLECOUNT statistics for each metric that is streamed. You can use this parameter to have the metric stream also send additional statistics in the stream. This array can have up to 100 members. For each entry in this array, you specify one or more metrics and the list of additional statistics to stream for those metrics. The additional statistics that you can stream depend on the stream's OutputFormat. If the OutputFormat is json, you can stream any additional statistic that is supported by CloudWatch, listed in  CloudWatch statistics definitions. If the OutputFormat is opentelemetry0.7, you can stream percentile statistics such as p95, p99.9, and so on.
      */
     StatisticsConfigurations?: MetricStreamStatisticsConfigurations;
   }
@@ -2108,7 +2122,7 @@ declare namespace CloudWatch {
     Maximum: DatapointValue;
   }
   export type Statistics = Statistic[];
-  export type StatusCode = "Complete"|"InternalError"|"PartialData"|string;
+  export type StatusCode = "Complete"|"InternalError"|"PartialData"|"Forbidden"|string;
   export interface StopMetricStreamsInput {
     /**
      * The array of the names of metric streams to stop streaming. This is an "all or nothing" operation. If you do not have permission to access all of the metric streams that you list here, then none of the streams that you list in the operation will stop streaming.