cdk-comprehend-s3olap 2.0.49 → 2.0.50

package/node_modules/aws-sdk/clients/globalaccelerator.d.ts

@@ -20,11 +20,11 @@ declare class GlobalAccelerator extends Service {
    */
   addCustomRoutingEndpoints(callback?: (err: AWSError, data: GlobalAccelerator.Types.AddCustomRoutingEndpointsResponse) => void): Request<GlobalAccelerator.Types.AddCustomRoutingEndpointsResponse, AWSError>;
   /**
-   * Advertises an IPv4 address range that is provisioned for use with your AWS resources through bring your own IP addresses (BYOIP). It can take a few minutes before traffic to the specified addresses starts routing to AWS because of propagation delays.  To stop advertising the BYOIP address range, use  WithdrawByoipCidr. For more information, see Bring Your Own IP Addresses (BYOIP) in the AWS Global Accelerator Developer Guide.
+   * Advertises an IPv4 address range that is provisioned for use with your Amazon Web Services resources through bring your own IP addresses (BYOIP). It can take a few minutes before traffic to the specified addresses starts routing to Amazon Web Services because of propagation delays.  To stop advertising the BYOIP address range, use  WithdrawByoipCidr. For more information, see Bring your own IP addresses (BYOIP) in the Global Accelerator Developer Guide.
    */
   advertiseByoipCidr(params: GlobalAccelerator.Types.AdvertiseByoipCidrRequest, callback?: (err: AWSError, data: GlobalAccelerator.Types.AdvertiseByoipCidrResponse) => void): Request<GlobalAccelerator.Types.AdvertiseByoipCidrResponse, AWSError>;
   /**
-   * Advertises an IPv4 address range that is provisioned for use with your AWS resources through bring your own IP addresses (BYOIP). It can take a few minutes before traffic to the specified addresses starts routing to AWS because of propagation delays.  To stop advertising the BYOIP address range, use  WithdrawByoipCidr. For more information, see Bring Your Own IP Addresses (BYOIP) in the AWS Global Accelerator Developer Guide.
+   * Advertises an IPv4 address range that is provisioned for use with your Amazon Web Services resources through bring your own IP addresses (BYOIP). It can take a few minutes before traffic to the specified addresses starts routing to Amazon Web Services because of propagation delays.  To stop advertising the BYOIP address range, use  WithdrawByoipCidr. For more information, see Bring your own IP addresses (BYOIP) in the Global Accelerator Developer Guide.
    */
   advertiseByoipCidr(callback?: (err: AWSError, data: GlobalAccelerator.Types.AdvertiseByoipCidrResponse) => void): Request<GlobalAccelerator.Types.AdvertiseByoipCidrResponse, AWSError>;
   /**
@@ -36,27 +36,27 @@ declare class GlobalAccelerator extends Service {
    */
   allowCustomRoutingTraffic(callback?: (err: AWSError, data: {}) => void): Request<{}, AWSError>;
   /**
-   * Create an accelerator. An accelerator includes one or more listeners that process inbound connections and direct traffic to one or more endpoint groups, each of which includes endpoints, such as Network Load Balancers.   Global Accelerator is a global service that supports endpoints in multiple AWS Regions but you must specify the US West (Oregon) Region to create or update accelerators. 
+   * Create an accelerator. An accelerator includes one or more listeners that process inbound connections and direct traffic to one or more endpoint groups, each of which includes endpoints, such as Network Load Balancers.   Global Accelerator is a global service that supports endpoints in multiple Amazon Web Services Regions but you must specify the US West (Oregon) Region to create, update, or otherwise work with accelerators. That is, for example, specify --region us-west-2 on AWS CLI commands. 
    */
   createAccelerator(params: GlobalAccelerator.Types.CreateAcceleratorRequest, callback?: (err: AWSError, data: GlobalAccelerator.Types.CreateAcceleratorResponse) => void): Request<GlobalAccelerator.Types.CreateAcceleratorResponse, AWSError>;
   /**
-   * Create an accelerator. An accelerator includes one or more listeners that process inbound connections and direct traffic to one or more endpoint groups, each of which includes endpoints, such as Network Load Balancers.   Global Accelerator is a global service that supports endpoints in multiple AWS Regions but you must specify the US West (Oregon) Region to create or update accelerators. 
+   * Create an accelerator. An accelerator includes one or more listeners that process inbound connections and direct traffic to one or more endpoint groups, each of which includes endpoints, such as Network Load Balancers.   Global Accelerator is a global service that supports endpoints in multiple Amazon Web Services Regions but you must specify the US West (Oregon) Region to create, update, or otherwise work with accelerators. That is, for example, specify --region us-west-2 on AWS CLI commands. 
    */
   createAccelerator(callback?: (err: AWSError, data: GlobalAccelerator.Types.CreateAcceleratorResponse) => void): Request<GlobalAccelerator.Types.CreateAcceleratorResponse, AWSError>;
   /**
-   * Create a custom routing accelerator. A custom routing accelerator directs traffic to one of possibly thousands of Amazon EC2 instance destinations running in a single or multiple virtual private clouds (VPC) subnet endpoints. Be aware that, by default, all destination EC2 instances in a VPC subnet endpoint cannot receive traffic. To enable all destinations to receive traffic, or to specify individual port mappings that can receive traffic, see the  AllowCustomRoutingTraffic operation.  Global Accelerator is a global service that supports endpoints in multiple AWS Regions but you must specify the US West (Oregon) Region to create or update accelerators. 
+   * Create a custom routing accelerator. A custom routing accelerator directs traffic to one of possibly thousands of Amazon EC2 instance destinations running in a single or multiple virtual private clouds (VPC) subnet endpoints. Be aware that, by default, all destination EC2 instances in a VPC subnet endpoint cannot receive traffic. To enable all destinations to receive traffic, or to specify individual port mappings that can receive traffic, see the  AllowCustomRoutingTraffic operation.  Global Accelerator is a global service that supports endpoints in multiple Amazon Web Services Regions but you must specify the US West (Oregon) Region to create, update, or otherwise work with accelerators. That is, for example, specify --region us-west-2 on AWS CLI commands. 
    */
   createCustomRoutingAccelerator(params: GlobalAccelerator.Types.CreateCustomRoutingAcceleratorRequest, callback?: (err: AWSError, data: GlobalAccelerator.Types.CreateCustomRoutingAcceleratorResponse) => void): Request<GlobalAccelerator.Types.CreateCustomRoutingAcceleratorResponse, AWSError>;
   /**
-   * Create a custom routing accelerator. A custom routing accelerator directs traffic to one of possibly thousands of Amazon EC2 instance destinations running in a single or multiple virtual private clouds (VPC) subnet endpoints. Be aware that, by default, all destination EC2 instances in a VPC subnet endpoint cannot receive traffic. To enable all destinations to receive traffic, or to specify individual port mappings that can receive traffic, see the  AllowCustomRoutingTraffic operation.  Global Accelerator is a global service that supports endpoints in multiple AWS Regions but you must specify the US West (Oregon) Region to create or update accelerators. 
+   * Create a custom routing accelerator. A custom routing accelerator directs traffic to one of possibly thousands of Amazon EC2 instance destinations running in a single or multiple virtual private clouds (VPC) subnet endpoints. Be aware that, by default, all destination EC2 instances in a VPC subnet endpoint cannot receive traffic. To enable all destinations to receive traffic, or to specify individual port mappings that can receive traffic, see the  AllowCustomRoutingTraffic operation.  Global Accelerator is a global service that supports endpoints in multiple Amazon Web Services Regions but you must specify the US West (Oregon) Region to create, update, or otherwise work with accelerators. That is, for example, specify --region us-west-2 on AWS CLI commands. 
    */
   createCustomRoutingAccelerator(callback?: (err: AWSError, data: GlobalAccelerator.Types.CreateCustomRoutingAcceleratorResponse) => void): Request<GlobalAccelerator.Types.CreateCustomRoutingAcceleratorResponse, AWSError>;
   /**
-   * Create an endpoint group for the specified listener for a custom routing accelerator. An endpoint group is a collection of endpoints in one AWS Region. 
+   * Create an endpoint group for the specified listener for a custom routing accelerator. An endpoint group is a collection of endpoints in one Amazon Web Services Region. 
    */
   createCustomRoutingEndpointGroup(params: GlobalAccelerator.Types.CreateCustomRoutingEndpointGroupRequest, callback?: (err: AWSError, data: GlobalAccelerator.Types.CreateCustomRoutingEndpointGroupResponse) => void): Request<GlobalAccelerator.Types.CreateCustomRoutingEndpointGroupResponse, AWSError>;
   /**
-   * Create an endpoint group for the specified listener for a custom routing accelerator. An endpoint group is a collection of endpoints in one AWS Region. 
+   * Create an endpoint group for the specified listener for a custom routing accelerator. An endpoint group is a collection of endpoints in one Amazon Web Services Region. 
    */
   createCustomRoutingEndpointGroup(callback?: (err: AWSError, data: GlobalAccelerator.Types.CreateCustomRoutingEndpointGroupResponse) => void): Request<GlobalAccelerator.Types.CreateCustomRoutingEndpointGroupResponse, AWSError>;
   /**
@@ -68,11 +68,11 @@ declare class GlobalAccelerator extends Service {
    */
   createCustomRoutingListener(callback?: (err: AWSError, data: GlobalAccelerator.Types.CreateCustomRoutingListenerResponse) => void): Request<GlobalAccelerator.Types.CreateCustomRoutingListenerResponse, AWSError>;
   /**
-   * Create an endpoint group for the specified listener. An endpoint group is a collection of endpoints in one AWS Region. A resource must be valid and active when you add it as an endpoint.
+   * Create an endpoint group for the specified listener. An endpoint group is a collection of endpoints in one Amazon Web Services Region. A resource must be valid and active when you add it as an endpoint.
    */
   createEndpointGroup(params: GlobalAccelerator.Types.CreateEndpointGroupRequest, callback?: (err: AWSError, data: GlobalAccelerator.Types.CreateEndpointGroupResponse) => void): Request<GlobalAccelerator.Types.CreateEndpointGroupResponse, AWSError>;
   /**
-   * Create an endpoint group for the specified listener. An endpoint group is a collection of endpoints in one AWS Region. A resource must be valid and active when you add it as an endpoint.
+   * Create an endpoint group for the specified listener. An endpoint group is a collection of endpoints in one Amazon Web Services Region. A resource must be valid and active when you add it as an endpoint.
    */
   createEndpointGroup(callback?: (err: AWSError, data: GlobalAccelerator.Types.CreateEndpointGroupResponse) => void): Request<GlobalAccelerator.Types.CreateEndpointGroupResponse, AWSError>;
   /**
@@ -84,19 +84,19 @@ declare class GlobalAccelerator extends Service {
    */
   createListener(callback?: (err: AWSError, data: GlobalAccelerator.Types.CreateListenerResponse) => void): Request<GlobalAccelerator.Types.CreateListenerResponse, AWSError>;
   /**
-   * Delete an accelerator. Before you can delete an accelerator, you must disable it and remove all dependent resources (listeners and endpoint groups). To disable the accelerator, update the accelerator to set Enabled to false.  When you create an accelerator, by default, Global Accelerator provides you with a set of two static IP addresses. Alternatively, you can bring your own IP address ranges to Global Accelerator and assign IP addresses from those ranges.  The IP addresses are assigned to your accelerator for as long as it exists, even if you disable the accelerator and it no longer accepts or routes traffic. However, when you delete an accelerator, you lose the static IP addresses that are assigned to the accelerator, so you can no longer route traffic by using them. As a best practice, ensure that you have permissions in place to avoid inadvertently deleting accelerators. You can use IAM policies with Global Accelerator to limit the users who have permissions to delete an accelerator. For more information, see Authentication and Access Control in the AWS Global Accelerator Developer Guide. 
+   * Delete an accelerator. Before you can delete an accelerator, you must disable it and remove all dependent resources (listeners and endpoint groups). To disable the accelerator, update the accelerator to set Enabled to false.  When you create an accelerator, by default, Global Accelerator provides you with a set of two static IP addresses. Alternatively, you can bring your own IP address ranges to Global Accelerator and assign IP addresses from those ranges.  The IP addresses are assigned to your accelerator for as long as it exists, even if you disable the accelerator and it no longer accepts or routes traffic. However, when you delete an accelerator, you lose the static IP addresses that are assigned to the accelerator, so you can no longer route traffic by using them. As a best practice, ensure that you have permissions in place to avoid inadvertently deleting accelerators. You can use IAM policies with Global Accelerator to limit the users who have permissions to delete an accelerator. For more information, see Identity and access management in the Global Accelerator Developer Guide. 
    */
   deleteAccelerator(params: GlobalAccelerator.Types.DeleteAcceleratorRequest, callback?: (err: AWSError, data: {}) => void): Request<{}, AWSError>;
   /**
-   * Delete an accelerator. Before you can delete an accelerator, you must disable it and remove all dependent resources (listeners and endpoint groups). To disable the accelerator, update the accelerator to set Enabled to false.  When you create an accelerator, by default, Global Accelerator provides you with a set of two static IP addresses. Alternatively, you can bring your own IP address ranges to Global Accelerator and assign IP addresses from those ranges.  The IP addresses are assigned to your accelerator for as long as it exists, even if you disable the accelerator and it no longer accepts or routes traffic. However, when you delete an accelerator, you lose the static IP addresses that are assigned to the accelerator, so you can no longer route traffic by using them. As a best practice, ensure that you have permissions in place to avoid inadvertently deleting accelerators. You can use IAM policies with Global Accelerator to limit the users who have permissions to delete an accelerator. For more information, see Authentication and Access Control in the AWS Global Accelerator Developer Guide. 
+   * Delete an accelerator. Before you can delete an accelerator, you must disable it and remove all dependent resources (listeners and endpoint groups). To disable the accelerator, update the accelerator to set Enabled to false.  When you create an accelerator, by default, Global Accelerator provides you with a set of two static IP addresses. Alternatively, you can bring your own IP address ranges to Global Accelerator and assign IP addresses from those ranges.  The IP addresses are assigned to your accelerator for as long as it exists, even if you disable the accelerator and it no longer accepts or routes traffic. However, when you delete an accelerator, you lose the static IP addresses that are assigned to the accelerator, so you can no longer route traffic by using them. As a best practice, ensure that you have permissions in place to avoid inadvertently deleting accelerators. You can use IAM policies with Global Accelerator to limit the users who have permissions to delete an accelerator. For more information, see Identity and access management in the Global Accelerator Developer Guide. 
    */
   deleteAccelerator(callback?: (err: AWSError, data: {}) => void): Request<{}, AWSError>;
   /**
-   * Delete a custom routing accelerator. Before you can delete an accelerator, you must disable it and remove all dependent resources (listeners and endpoint groups). To disable the accelerator, update the accelerator to set Enabled to false.  When you create a custom routing accelerator, by default, Global Accelerator provides you with a set of two static IP addresses.  The IP addresses are assigned to your accelerator for as long as it exists, even if you disable the accelerator and it no longer accepts or routes traffic. However, when you delete an accelerator, you lose the static IP addresses that are assigned to the accelerator, so you can no longer route traffic by using them. As a best practice, ensure that you have permissions in place to avoid inadvertently deleting accelerators. You can use IAM policies with Global Accelerator to limit the users who have permissions to delete an accelerator. For more information, see Authentication and Access Control in the AWS Global Accelerator Developer Guide. 
+   * Delete a custom routing accelerator. Before you can delete an accelerator, you must disable it and remove all dependent resources (listeners and endpoint groups). To disable the accelerator, update the accelerator to set Enabled to false.  When you create a custom routing accelerator, by default, Global Accelerator provides you with a set of two static IP addresses.  The IP addresses are assigned to your accelerator for as long as it exists, even if you disable the accelerator and it no longer accepts or routes traffic. However, when you delete an accelerator, you lose the static IP addresses that are assigned to the accelerator, so you can no longer route traffic by using them. As a best practice, ensure that you have permissions in place to avoid inadvertently deleting accelerators. You can use IAM policies with Global Accelerator to limit the users who have permissions to delete an accelerator. For more information, see Identity and access management in the Global Accelerator Developer Guide. 
    */
   deleteCustomRoutingAccelerator(params: GlobalAccelerator.Types.DeleteCustomRoutingAcceleratorRequest, callback?: (err: AWSError, data: {}) => void): Request<{}, AWSError>;
   /**
-   * Delete a custom routing accelerator. Before you can delete an accelerator, you must disable it and remove all dependent resources (listeners and endpoint groups). To disable the accelerator, update the accelerator to set Enabled to false.  When you create a custom routing accelerator, by default, Global Accelerator provides you with a set of two static IP addresses.  The IP addresses are assigned to your accelerator for as long as it exists, even if you disable the accelerator and it no longer accepts or routes traffic. However, when you delete an accelerator, you lose the static IP addresses that are assigned to the accelerator, so you can no longer route traffic by using them. As a best practice, ensure that you have permissions in place to avoid inadvertently deleting accelerators. You can use IAM policies with Global Accelerator to limit the users who have permissions to delete an accelerator. For more information, see Authentication and Access Control in the AWS Global Accelerator Developer Guide. 
+   * Delete a custom routing accelerator. Before you can delete an accelerator, you must disable it and remove all dependent resources (listeners and endpoint groups). To disable the accelerator, update the accelerator to set Enabled to false.  When you create a custom routing accelerator, by default, Global Accelerator provides you with a set of two static IP addresses.  The IP addresses are assigned to your accelerator for as long as it exists, even if you disable the accelerator and it no longer accepts or routes traffic. However, when you delete an accelerator, you lose the static IP addresses that are assigned to the accelerator, so you can no longer route traffic by using them. As a best practice, ensure that you have permissions in place to avoid inadvertently deleting accelerators. You can use IAM policies with Global Accelerator to limit the users who have permissions to delete an accelerator. For more information, see Identity and access management in the Global Accelerator Developer Guide. 
    */
   deleteCustomRoutingAccelerator(callback?: (err: AWSError, data: {}) => void): Request<{}, AWSError>;
   /**
@@ -140,11 +140,11 @@ declare class GlobalAccelerator extends Service {
    */
   denyCustomRoutingTraffic(callback?: (err: AWSError, data: {}) => void): Request<{}, AWSError>;
   /**
-   * Releases the specified address range that you provisioned to use with your AWS resources through bring your own IP addresses (BYOIP) and deletes the corresponding address pool.  Before you can release an address range, you must stop advertising it by using WithdrawByoipCidr and you must not have any accelerators that are using static IP addresses allocated from its address range.  For more information, see Bring Your Own IP Addresses (BYOIP) in the AWS Global Accelerator Developer Guide.
+   * Releases the specified address range that you provisioned to use with your Amazon Web Services resources through bring your own IP addresses (BYOIP) and deletes the corresponding address pool.  Before you can release an address range, you must stop advertising it by using WithdrawByoipCidr and you must not have any accelerators that are using static IP addresses allocated from its address range.  For more information, see Bring your own IP addresses (BYOIP) in the Global Accelerator Developer Guide.
    */
   deprovisionByoipCidr(params: GlobalAccelerator.Types.DeprovisionByoipCidrRequest, callback?: (err: AWSError, data: GlobalAccelerator.Types.DeprovisionByoipCidrResponse) => void): Request<GlobalAccelerator.Types.DeprovisionByoipCidrResponse, AWSError>;
   /**
-   * Releases the specified address range that you provisioned to use with your AWS resources through bring your own IP addresses (BYOIP) and deletes the corresponding address pool.  Before you can release an address range, you must stop advertising it by using WithdrawByoipCidr and you must not have any accelerators that are using static IP addresses allocated from its address range.  For more information, see Bring Your Own IP Addresses (BYOIP) in the AWS Global Accelerator Developer Guide.
+   * Releases the specified address range that you provisioned to use with your Amazon Web Services resources through bring your own IP addresses (BYOIP) and deletes the corresponding address pool.  Before you can release an address range, you must stop advertising it by using WithdrawByoipCidr and you must not have any accelerators that are using static IP addresses allocated from its address range.  For more information, see Bring your own IP addresses (BYOIP) in the Global Accelerator Developer Guide.
    */
   deprovisionByoipCidr(callback?: (err: AWSError, data: GlobalAccelerator.Types.DeprovisionByoipCidrResponse) => void): Request<GlobalAccelerator.Types.DeprovisionByoipCidrResponse, AWSError>;
   /**
@@ -212,11 +212,11 @@ declare class GlobalAccelerator extends Service {
    */
   describeListener(callback?: (err: AWSError, data: GlobalAccelerator.Types.DescribeListenerResponse) => void): Request<GlobalAccelerator.Types.DescribeListenerResponse, AWSError>;
   /**
-   * List the accelerators for an AWS account. 
+   * List the accelerators for an Amazon Web Services account. 
    */
   listAccelerators(params: GlobalAccelerator.Types.ListAcceleratorsRequest, callback?: (err: AWSError, data: GlobalAccelerator.Types.ListAcceleratorsResponse) => void): Request<GlobalAccelerator.Types.ListAcceleratorsResponse, AWSError>;
   /**
-   * List the accelerators for an AWS account. 
+   * List the accelerators for an Amazon Web Services account. 
    */
   listAccelerators(callback?: (err: AWSError, data: GlobalAccelerator.Types.ListAcceleratorsResponse) => void): Request<GlobalAccelerator.Types.ListAcceleratorsResponse, AWSError>;
   /**
@@ -228,11 +228,11 @@ declare class GlobalAccelerator extends Service {
    */
   listByoipCidrs(callback?: (err: AWSError, data: GlobalAccelerator.Types.ListByoipCidrsResponse) => void): Request<GlobalAccelerator.Types.ListByoipCidrsResponse, AWSError>;
   /**
-   * List the custom routing accelerators for an AWS account. 
+   * List the custom routing accelerators for an Amazon Web Services account. 
    */
   listCustomRoutingAccelerators(params: GlobalAccelerator.Types.ListCustomRoutingAcceleratorsRequest, callback?: (err: AWSError, data: GlobalAccelerator.Types.ListCustomRoutingAcceleratorsResponse) => void): Request<GlobalAccelerator.Types.ListCustomRoutingAcceleratorsResponse, AWSError>;
   /**
-   * List the custom routing accelerators for an AWS account. 
+   * List the custom routing accelerators for an Amazon Web Services account. 
    */
   listCustomRoutingAccelerators(callback?: (err: AWSError, data: GlobalAccelerator.Types.ListCustomRoutingAcceleratorsResponse) => void): Request<GlobalAccelerator.Types.ListCustomRoutingAcceleratorsResponse, AWSError>;
   /**
@@ -284,19 +284,19 @@ declare class GlobalAccelerator extends Service {
    */
   listListeners(callback?: (err: AWSError, data: GlobalAccelerator.Types.ListListenersResponse) => void): Request<GlobalAccelerator.Types.ListListenersResponse, AWSError>;
   /**
-   * List all tags for an accelerator.  For more information, see Tagging in AWS Global Accelerator in the AWS Global Accelerator Developer Guide. 
+   * List all tags for an accelerator.  For more information, see Tagging in Global Accelerator in the Global Accelerator Developer Guide. 
    */
   listTagsForResource(params: GlobalAccelerator.Types.ListTagsForResourceRequest, callback?: (err: AWSError, data: GlobalAccelerator.Types.ListTagsForResourceResponse) => void): Request<GlobalAccelerator.Types.ListTagsForResourceResponse, AWSError>;
   /**
-   * List all tags for an accelerator.  For more information, see Tagging in AWS Global Accelerator in the AWS Global Accelerator Developer Guide. 
+   * List all tags for an accelerator.  For more information, see Tagging in Global Accelerator in the Global Accelerator Developer Guide. 
    */
   listTagsForResource(callback?: (err: AWSError, data: GlobalAccelerator.Types.ListTagsForResourceResponse) => void): Request<GlobalAccelerator.Types.ListTagsForResourceResponse, AWSError>;
   /**
-   * Provisions an IP address range to use with your AWS resources through bring your own IP addresses (BYOIP) and creates a corresponding address pool. After the address range is provisioned, it is ready to be advertised using  AdvertiseByoipCidr. For more information, see Bring Your Own IP Addresses (BYOIP) in the AWS Global Accelerator Developer Guide.
+   * Provisions an IP address range to use with your Amazon Web Services resources through bring your own IP addresses (BYOIP) and creates a corresponding address pool. After the address range is provisioned, it is ready to be advertised using  AdvertiseByoipCidr. For more information, see Bring your own IP addresses (BYOIP) in the Global Accelerator Developer Guide.
    */
   provisionByoipCidr(params: GlobalAccelerator.Types.ProvisionByoipCidrRequest, callback?: (err: AWSError, data: GlobalAccelerator.Types.ProvisionByoipCidrResponse) => void): Request<GlobalAccelerator.Types.ProvisionByoipCidrResponse, AWSError>;
   /**
-   * Provisions an IP address range to use with your AWS resources through bring your own IP addresses (BYOIP) and creates a corresponding address pool. After the address range is provisioned, it is ready to be advertised using  AdvertiseByoipCidr. For more information, see Bring Your Own IP Addresses (BYOIP) in the AWS Global Accelerator Developer Guide.
+   * Provisions an IP address range to use with your Amazon Web Services resources through bring your own IP addresses (BYOIP) and creates a corresponding address pool. After the address range is provisioned, it is ready to be advertised using  AdvertiseByoipCidr. For more information, see Bring your own IP addresses (BYOIP) in the Global Accelerator Developer Guide.
    */
   provisionByoipCidr(callback?: (err: AWSError, data: GlobalAccelerator.Types.ProvisionByoipCidrResponse) => void): Request<GlobalAccelerator.Types.ProvisionByoipCidrResponse, AWSError>;
   /**
@@ -308,27 +308,27 @@ declare class GlobalAccelerator extends Service {
    */
   removeCustomRoutingEndpoints(callback?: (err: AWSError, data: {}) => void): Request<{}, AWSError>;
   /**
-   * Add tags to an accelerator resource.  For more information, see Tagging in AWS Global Accelerator in the AWS Global Accelerator Developer Guide. 
+   * Add tags to an accelerator resource.  For more information, see Tagging in Global Accelerator in the Global Accelerator Developer Guide. 
    */
   tagResource(params: GlobalAccelerator.Types.TagResourceRequest, callback?: (err: AWSError, data: GlobalAccelerator.Types.TagResourceResponse) => void): Request<GlobalAccelerator.Types.TagResourceResponse, AWSError>;
   /**
-   * Add tags to an accelerator resource.  For more information, see Tagging in AWS Global Accelerator in the AWS Global Accelerator Developer Guide. 
+   * Add tags to an accelerator resource.  For more information, see Tagging in Global Accelerator in the Global Accelerator Developer Guide. 
    */
   tagResource(callback?: (err: AWSError, data: GlobalAccelerator.Types.TagResourceResponse) => void): Request<GlobalAccelerator.Types.TagResourceResponse, AWSError>;
   /**
-   * Remove tags from a Global Accelerator resource. When you specify a tag key, the action removes both that key and its associated value. The operation succeeds even if you attempt to remove tags from an accelerator that was already removed. For more information, see Tagging in AWS Global Accelerator in the AWS Global Accelerator Developer Guide.
+   * Remove tags from a Global Accelerator resource. When you specify a tag key, the action removes both that key and its associated value. The operation succeeds even if you attempt to remove tags from an accelerator that was already removed. For more information, see Tagging in Global Accelerator in the Global Accelerator Developer Guide.
    */
   untagResource(params: GlobalAccelerator.Types.UntagResourceRequest, callback?: (err: AWSError, data: GlobalAccelerator.Types.UntagResourceResponse) => void): Request<GlobalAccelerator.Types.UntagResourceResponse, AWSError>;
   /**
-   * Remove tags from a Global Accelerator resource. When you specify a tag key, the action removes both that key and its associated value. The operation succeeds even if you attempt to remove tags from an accelerator that was already removed. For more information, see Tagging in AWS Global Accelerator in the AWS Global Accelerator Developer Guide.
+   * Remove tags from a Global Accelerator resource. When you specify a tag key, the action removes both that key and its associated value. The operation succeeds even if you attempt to remove tags from an accelerator that was already removed. For more information, see Tagging in Global Accelerator in the Global Accelerator Developer Guide.
    */
   untagResource(callback?: (err: AWSError, data: GlobalAccelerator.Types.UntagResourceResponse) => void): Request<GlobalAccelerator.Types.UntagResourceResponse, AWSError>;
   /**
-   * Update an accelerator.   Global Accelerator is a global service that supports endpoints in multiple AWS Regions but you must specify the US West (Oregon) Region to create or update accelerators. 
+   * Update an accelerator.   Global Accelerator is a global service that supports endpoints in multiple Amazon Web Services Regions but you must specify the US West (Oregon) Region to create, update, or otherwise work with accelerators. That is, for example, specify --region us-west-2 on AWS CLI commands. 
    */
   updateAccelerator(params: GlobalAccelerator.Types.UpdateAcceleratorRequest, callback?: (err: AWSError, data: GlobalAccelerator.Types.UpdateAcceleratorResponse) => void): Request<GlobalAccelerator.Types.UpdateAcceleratorResponse, AWSError>;
   /**
-   * Update an accelerator.   Global Accelerator is a global service that supports endpoints in multiple AWS Regions but you must specify the US West (Oregon) Region to create or update accelerators. 
+   * Update an accelerator.   Global Accelerator is a global service that supports endpoints in multiple Amazon Web Services Regions but you must specify the US West (Oregon) Region to create, update, or otherwise work with accelerators. That is, for example, specify --region us-west-2 on AWS CLI commands. 
    */
   updateAccelerator(callback?: (err: AWSError, data: GlobalAccelerator.Types.UpdateAcceleratorResponse) => void): Request<GlobalAccelerator.Types.UpdateAcceleratorResponse, AWSError>;
   /**
@@ -380,11 +380,11 @@ declare class GlobalAccelerator extends Service {
    */
   updateListener(callback?: (err: AWSError, data: GlobalAccelerator.Types.UpdateListenerResponse) => void): Request<GlobalAccelerator.Types.UpdateListenerResponse, AWSError>;
   /**
-   * Stops advertising an address range that is provisioned as an address pool. You can perform this operation at most once every 10 seconds, even if you specify different address ranges each time. It can take a few minutes before traffic to the specified addresses stops routing to AWS because of propagation delays. For more information, see Bring Your Own IP Addresses (BYOIP) in the AWS Global Accelerator Developer Guide.
+   * Stops advertising an address range that is provisioned as an address pool. You can perform this operation at most once every 10 seconds, even if you specify different address ranges each time. It can take a few minutes before traffic to the specified addresses stops routing to Amazon Web Services because of propagation delays. For more information, see Bring your own IP addresses (BYOIP) in the Global Accelerator Developer Guide.
    */
   withdrawByoipCidr(params: GlobalAccelerator.Types.WithdrawByoipCidrRequest, callback?: (err: AWSError, data: GlobalAccelerator.Types.WithdrawByoipCidrResponse) => void): Request<GlobalAccelerator.Types.WithdrawByoipCidrResponse, AWSError>;
   /**
-   * Stops advertising an address range that is provisioned as an address pool. You can perform this operation at most once every 10 seconds, even if you specify different address ranges each time. It can take a few minutes before traffic to the specified addresses stops routing to AWS because of propagation delays. For more information, see Bring Your Own IP Addresses (BYOIP) in the AWS Global Accelerator Developer Guide.
+   * Stops advertising an address range that is provisioned as an address pool. You can perform this operation at most once every 10 seconds, even if you specify different address ranges each time. It can take a few minutes before traffic to the specified addresses stops routing to Amazon Web Services because of propagation delays. For more information, see Bring your own IP addresses (BYOIP) in the Global Accelerator Developer Guide.
    */
   withdrawByoipCidr(callback?: (err: AWSError, data: GlobalAccelerator.Types.WithdrawByoipCidrResponse) => void): Request<GlobalAccelerator.Types.WithdrawByoipCidrResponse, AWSError>;
 }
@@ -399,7 +399,7 @@ declare namespace GlobalAccelerator {
      */
     Name?: GenericString;
     /**
-     * The value for the address type must be IPv4. 
+     * The IP address type that an accelerator supports. For a standard accelerator, the value can be IPV4 or DUAL_STACK.
      */
     IpAddressType?: IpAddressType;
     /**
@@ -411,7 +411,7 @@ declare namespace GlobalAccelerator {
      */
     IpSets?: IpSets;
     /**
-     * The Domain Name System (DNS) name that Global Accelerator creates that points to your accelerator's static IP addresses.  The naming convention for the DNS name is the following: A lowercase letter a, followed by a 16-bit random hex string, followed by .awsglobalaccelerator.com. For example: a1234567890abcdef.awsglobalaccelerator.com. For more information about the default DNS name, see  Support for DNS Addressing in Global Accelerator in the AWS Global Accelerator Developer Guide.
+     * The Domain Name System (DNS) name that Global Accelerator creates that points to an accelerator's static IPv4 addresses. The naming convention for the DNS name for an accelerator is the following: A lowercase letter a, followed by a 16-bit random hex string, followed by .awsglobalaccelerator.com. For example: a1234567890abcdef.awsglobalaccelerator.com. If you have a dual-stack accelerator, you also have a second DNS name, DualStackDnsName, that points to both the A record and the AAAA record for all four static addresses for the accelerator (two IPv4 addresses and two IPv6 addresses). For more information about the default DNS name, see  Support for DNS Addressing in Global Accelerator in the Global Accelerator Developer Guide.
      */
     DnsName?: GenericString;
     /**
@@ -426,21 +426,40 @@ declare namespace GlobalAccelerator {
      * The date and time that the accelerator was last modified.
      */
     LastModifiedTime?: Timestamp;
+    /**
+     * The Domain Name System (DNS) name that Global Accelerator creates that points to a dual-stack accelerator's four static IP addresses: two IPv4 addresses and two IPv6 addresses. The naming convention for the dual-stack DNS name is the following: A lowercase letter a, followed by a 16-bit random hex string, followed by .dualstack.awsglobalaccelerator.com. For example: a1234567890abcdef.dualstack.awsglobalaccelerator.com. Note: Global Accelerator also assigns a default DNS name, DnsName, to your accelerator that points just to the static IPv4 addresses.  For more information, see  Support for DNS Addressing in Global Accelerator in the Global Accelerator Developer Guide.
+     */
+    DualStackDnsName?: GenericString;
+    /**
+     * A history of changes that you make to an accelerator in Global Accelerator.
+     */
+    Events?: AcceleratorEvents;
   }
   export interface AcceleratorAttributes {
     /**
-     * Indicates whether flow logs are enabled. The default value is false. If the value is true, FlowLogsS3Bucket and FlowLogsS3Prefix must be specified. For more information, see Flow Logs in the AWS Global Accelerator Developer Guide.
+     * Indicates whether flow logs are enabled. The default value is false. If the value is true, FlowLogsS3Bucket and FlowLogsS3Prefix must be specified. For more information, see Flow logs in the Global Accelerator Developer Guide.
      */
     FlowLogsEnabled?: GenericBoolean;
     /**
-     * The name of the Amazon S3 bucket for the flow logs. Attribute is required if FlowLogsEnabled is true. The bucket must exist and have a bucket policy that grants AWS Global Accelerator permission to write to the bucket.
+     * The name of the Amazon S3 bucket for the flow logs. Attribute is required if FlowLogsEnabled is true. The bucket must exist and have a bucket policy that grants Global Accelerator permission to write to the bucket.
      */
     FlowLogsS3Bucket?: GenericString;
     /**
-     * The prefix for the location in the Amazon S3 bucket for the flow logs. Attribute is required if FlowLogsEnabled is true. If you don’t specify a prefix, the flow logs are stored in the root of the bucket. If you specify slash (/) for the S3 bucket prefix, the log file bucket folder structure will include a double slash (//), like the following: s3-bucket_name//AWSLogs/aws_account_id
+     * The prefix for the location in the Amazon S3 bucket for the flow logs. Attribute is required if FlowLogsEnabled is true. If you specify slash (/) for the S3 bucket prefix, the log file bucket folder structure will include a double slash (//), like the following: s3-bucket_name//AWSLogs/aws_account_id
      */
     FlowLogsS3Prefix?: GenericString;
   }
+  export interface AcceleratorEvent {
+    /**
+     * A string that contains an Event message describing changes or errors when you update an accelerator in Global Accelerator from IPv4 to dual-stack, or dual-stack to IPv4.
+     */
+    Message?: GenericString;
+    /**
+     * A timestamp for when you update an accelerator in Global Accelerator from IPv4 to dual-stack, or dual-stack to IPv4.
+     */
+    Timestamp?: Timestamp;
+  }
+  export type AcceleratorEvents = AcceleratorEvent[];
   export type AcceleratorStatus = "DEPLOYED"|"IN_PROGRESS"|string;
   export type Accelerators = Accelerator[];
   export interface AddCustomRoutingEndpointsRequest {
@@ -507,17 +526,17 @@ declare namespace GlobalAccelerator {
      */
     State?: ByoipCidrState;
     /**
-     * A history of status changes for an IP address range that you bring to AWS Global Accelerator through bring your own IP address (BYOIP).
+     * A history of status changes for an IP address range that you bring to Global Accelerator through bring your own IP address (BYOIP).
      */
     Events?: ByoipCidrEvents;
   }
   export interface ByoipCidrEvent {
     /**
-     * A string that contains an Event message describing changes that you make in the status of an IP address range that you bring to AWS Global Accelerator through bring your own IP address (BYOIP).
+     * A string that contains an Event message describing changes that you make in the status of an IP address range that you bring to Global Accelerator through bring your own IP address (BYOIP).
      */
     Message?: GenericString;
     /**
-     * A timestamp when you make a status change for an IP address range that you bring to AWS Global Accelerator through bring your own IP address (BYOIP).
+     * A timestamp for when you make a status change for an IP address range that you bring to Global Accelerator through bring your own IP address (BYOIP).
      */
     Timestamp?: Timestamp;
   }
@@ -537,15 +556,15 @@ declare namespace GlobalAccelerator {
   export type ClientAffinity = "NONE"|"SOURCE_IP"|string;
   export interface CreateAcceleratorRequest {
     /**
-     * The name of an accelerator. The name can have a maximum of 32 characters, must contain only alphanumeric characters or hyphens (-), and must not begin or end with a hyphen.
+     * The name of the accelerator. The name can have a maximum of 64 characters, must contain only alphanumeric characters, periods (.), or hyphens (-), and must not begin or end with a hyphen or period.
      */
     Name: GenericString;
     /**
-     * The value for the address type must be IPv4.
+     * The IP address type that an accelerator supports. For a standard accelerator, the value can be IPV4 or DUAL_STACK.
      */
     IpAddressType?: IpAddressType;
     /**
-     * Optionally, if you've added your own IP address pool to Global Accelerator (BYOIP), you can choose IP addresses from your own pool to use for the accelerator's static IP addresses when you create an accelerator. You can specify one or two addresses, separated by a space. Do not include the /32 suffix. Only one IP address from each of your IP address ranges can be used for each accelerator. If you specify only one IP address from your IP address range, Global Accelerator assigns a second static IP address for the accelerator from the AWS IP address pool. Note that you can't update IP addresses for an existing accelerator. To change them, you must create a new accelerator with the new addresses. For more information, see Bring Your Own IP Addresses (BYOIP) in the AWS Global Accelerator Developer Guide.
+     * Optionally, if you've added your own IP address pool to Global Accelerator (BYOIP), you can choose an IPv4 address from your own pool to use for the accelerator's static IPv4 address when you create an accelerator.  After you bring an address range to Amazon Web Services, it appears in your account as an address pool. When you create an accelerator, you can assign one IPv4 address from your range to it. Global Accelerator assigns you a second static IPv4 address from an Amazon IP address range. If you bring two IPv4 address ranges to Amazon Web Services, you can assign one IPv4 address from each range to your accelerator. This restriction is because Global Accelerator assigns each address range to a different network zone, for high availability. You can specify one or two addresses, separated by a space. Do not include the /32 suffix. Note that you can't update IP addresses for an existing accelerator. To change them, you must create a new accelerator with the new addresses. For more information, see Bring your own IP addresses (BYOIP) in the Global Accelerator Developer Guide.
      */
     IpAddresses?: IpAddresses;
     /**
@@ -557,7 +576,7 @@ declare namespace GlobalAccelerator {
      */
     IdempotencyToken: IdempotencyToken;
     /**
-     * Create tags for an accelerator. For more information, see Tagging in AWS Global Accelerator in the AWS Global Accelerator Developer Guide.
+     * Create tags for an accelerator. For more information, see Tagging in Global Accelerator in the Global Accelerator Developer Guide.
      */
     Tags?: Tags;
   }
@@ -573,11 +592,11 @@ declare namespace GlobalAccelerator {
      */
     Name: GenericString;
     /**
-     * The value for the address type must be IPv4.
+     * The IP address type that an accelerator supports. For a custom routing accelerator, the value must be IPV4.
      */
     IpAddressType?: IpAddressType;
     /**
-     * Optionally, if you've added your own IP address pool to Global Accelerator (BYOIP), you can choose IP addresses from your own pool to use for the accelerator's static IP addresses when you create an accelerator. You can specify one or two addresses, separated by a space. Do not include the /32 suffix. Only one IP address from each of your IP address ranges can be used for each accelerator. If you specify only one IP address from your IP address range, Global Accelerator assigns a second static IP address for the accelerator from the AWS IP address pool. Note that you can't update IP addresses for an existing accelerator. To change them, you must create a new accelerator with the new addresses. For more information, see Bring your own IP addresses (BYOIP) in the AWS Global Accelerator Developer Guide.
+     * Optionally, if you've added your own IP address pool to Global Accelerator (BYOIP), you can choose an IPv4 address from your own pool to use for the accelerator's static IPv4 address when you create an accelerator.  After you bring an address range to Amazon Web Services, it appears in your account as an address pool. When you create an accelerator, you can assign one IPv4 address from your range to it. Global Accelerator assigns you a second static IPv4 address from an Amazon IP address range. If you bring two IPv4 address ranges to Amazon Web Services, you can assign one IPv4 address from each range to your accelerator. This restriction is because Global Accelerator assigns each address range to a different network zone, for high availability. You can specify one or two addresses, separated by a space. Do not include the /32 suffix. Note that you can't update IP addresses for an existing accelerator. To change them, you must create a new accelerator with the new addresses. For more information, see Bring your own IP addresses (BYOIP) in the Global Accelerator Developer Guide.
      */
     IpAddresses?: IpAddresses;
     /**
@@ -589,7 +608,7 @@ declare namespace GlobalAccelerator {
      */
     IdempotencyToken: IdempotencyToken;
     /**
-     * Create tags for an accelerator. For more information, see Tagging in AWS Global Accelerator in the AWS Global Accelerator Developer Guide.
+     * Create tags for an accelerator. For more information, see Tagging in Global Accelerator in the Global Accelerator Developer Guide.
      */
     Tags?: Tags;
   }
@@ -605,7 +624,7 @@ declare namespace GlobalAccelerator {
      */
     ListenerArn: GenericString;
     /**
-     * The AWS Region where the endpoint group is located. A listener can have only one endpoint group in a specific Region.
+     * The Amazon Web Services Region where the endpoint group is located. A listener can have only one endpoint group in a specific Region.
      */
     EndpointGroupRegion: GenericString;
     /**
@@ -649,7 +668,7 @@ declare namespace GlobalAccelerator {
      */
     ListenerArn: GenericString;
     /**
-     * The AWS Region where the endpoint group is located. A listener can have only one endpoint group in a specific Region.
+     * The Amazon Web Services Region where the endpoint group is located. A listener can have only one endpoint group in a specific Region.
      */
     EndpointGroupRegion: GenericString;
     /**
@@ -657,15 +676,15 @@ declare namespace GlobalAccelerator {
      */
     EndpointConfigurations?: EndpointConfigurations;
     /**
-     * The percentage of traffic to send to an AWS Region. Additional traffic is distributed to other endpoint groups for this listener.  Use this action to increase (dial up) or decrease (dial down) traffic to a specific Region. The percentage is applied to the traffic that would otherwise have been routed to the Region based on optimal routing. The default value is 100.
+     * The percentage of traffic to send to an Amazon Web Services Region. Additional traffic is distributed to other endpoint groups for this listener.  Use this action to increase (dial up) or decrease (dial down) traffic to a specific Region. The percentage is applied to the traffic that would otherwise have been routed to the Region based on optimal routing. The default value is 100.
      */
     TrafficDialPercentage?: TrafficDialPercentage;
     /**
-     * The port that AWS Global Accelerator uses to check the health of endpoints that are part of this endpoint group. The default port is the listener port that this endpoint group is associated with. If listener port is a list of ports, Global Accelerator uses the first port in the list.
+     * The port that Global Accelerator uses to check the health of endpoints that are part of this endpoint group. The default port is the listener port that this endpoint group is associated with. If listener port is a list of ports, Global Accelerator uses the first port in the list.
      */
     HealthCheckPort?: HealthCheckPort;
     /**
-     * The protocol that AWS Global Accelerator uses to check the health of endpoints that are part of this endpoint group. The default value is TCP.
+     * The protocol that Global Accelerator uses to check the health of endpoints that are part of this endpoint group. The default value is TCP.
      */
     HealthCheckProtocol?: HealthCheckProtocol;
     /**
@@ -685,7 +704,7 @@ declare namespace GlobalAccelerator {
      */
     IdempotencyToken: IdempotencyToken;
     /**
-     * Override specific listener ports used to route traffic to endpoints that are part of this endpoint group. For example, you can create a port override in which the listener receives user traffic on ports 80 and 443, but your accelerator routes that traffic to ports 1080 and 1443, respectively, on the endpoints. For more information, see  Port overrides in the AWS Global Accelerator Developer Guide.
+     * Override specific listener ports used to route traffic to endpoints that are part of this endpoint group. For example, you can create a port override in which the listener receives user traffic on ports 80 and 443, but your accelerator routes that traffic to ports 1080 and 1443, respectively, on the endpoints. For more information, see  Overriding listener ports in the Global Accelerator Developer Guide.
      */
     PortOverrides?: PortOverrides;
   }
@@ -709,7 +728,7 @@ declare namespace GlobalAccelerator {
      */
     Protocol: Protocol;
     /**
-     * Client affinity lets you direct all requests from a user to the same endpoint, if you have stateful applications, regardless of the port and protocol of the client request. Client affinity gives you control over whether to always route each client to the same specific endpoint. AWS Global Accelerator uses a consistent-flow hashing algorithm to choose the optimal endpoint for a connection. If client affinity is NONE, Global Accelerator uses the "five-tuple" (5-tuple) properties—source IP address, source port, destination IP address, destination port, and protocol—to select the hash value, and then chooses the best endpoint. However, with this setting, if someone uses different ports to connect to Global Accelerator, their connections might not be always routed to the same endpoint because the hash value changes.  If you want a given client to always be routed to the same endpoint, set client affinity to SOURCE_IP instead. When you use the SOURCE_IP setting, Global Accelerator uses the "two-tuple" (2-tuple) properties— source (client) IP address and destination IP address—to select the hash value. The default value is NONE.
+     * Client affinity lets you direct all requests from a user to the same endpoint, if you have stateful applications, regardless of the port and protocol of the client request. Client affinity gives you control over whether to always route each client to the same specific endpoint. Global Accelerator uses a consistent-flow hashing algorithm to choose the optimal endpoint for a connection. If client affinity is NONE, Global Accelerator uses the "five-tuple" (5-tuple) properties—source IP address, source port, destination IP address, destination port, and protocol—to select the hash value, and then chooses the best endpoint. However, with this setting, if someone uses different ports to connect to Global Accelerator, their connections might not be always routed to the same endpoint because the hash value changes.  If you want a given client to always be routed to the same endpoint, set client affinity to SOURCE_IP instead. When you use the SOURCE_IP setting, Global Accelerator uses the "two-tuple" (2-tuple) properties— source (client) IP address and destination IP address—to select the hash value. The default value is NONE.
      */
     ClientAffinity?: ClientAffinity;
     /**
@@ -733,7 +752,7 @@ declare namespace GlobalAccelerator {
      */
     Name?: GenericString;
     /**
-     * The value for the address type must be IPv4.
+     * The IP address type that an accelerator supports. For a custom routing accelerator, the value must be IPV4.
      */
     IpAddressType?: IpAddressType;
     /**
@@ -745,7 +764,7 @@ declare namespace GlobalAccelerator {
      */
     IpSets?: IpSets;
     /**
-     * The Domain Name System (DNS) name that Global Accelerator creates that points to your accelerator's static IP addresses.  The naming convention for the DNS name is the following: A lowercase letter a, followed by a 16-bit random hex string, followed by .awsglobalaccelerator.com. For example: a1234567890abcdef.awsglobalaccelerator.com. For more information about the default DNS name, see  Support for DNS Addressing in Global Accelerator in the AWS Global Accelerator Developer Guide.
+     * The Domain Name System (DNS) name that Global Accelerator creates that points to an accelerator's static IPv4 addresses.  The naming convention for the DNS name is the following: A lowercase letter a, followed by a 16-bit random hex string, followed by .awsglobalaccelerator.com. For example: a1234567890abcdef.awsglobalaccelerator.com. If you have a dual-stack accelerator, you also have a second DNS name, DualStackDnsName, that points to both the A record and the AAAA record for all four static addresses for the accelerator (two IPv4 addresses and two IPv6 addresses). For more information about the default DNS name, see  Support for DNS Addressing in Global Accelerator in the Global Accelerator Developer Guide.
      */
     DnsName?: GenericString;
     /**
@@ -763,11 +782,11 @@ declare namespace GlobalAccelerator {
   }
   export interface CustomRoutingAcceleratorAttributes {
     /**
-     * Indicates whether flow logs are enabled. The default value is false. If the value is true, FlowLogsS3Bucket and FlowLogsS3Prefix must be specified. For more information, see Flow Logs in the AWS Global Accelerator Developer Guide.
+     * Indicates whether flow logs are enabled. The default value is false. If the value is true, FlowLogsS3Bucket and FlowLogsS3Prefix must be specified. For more information, see Flow logs in the Global Accelerator Developer Guide.
      */
     FlowLogsEnabled?: GenericBoolean;
     /**
-     * The name of the Amazon S3 bucket for the flow logs. Attribute is required if FlowLogsEnabled is true. The bucket must exist and have a bucket policy that grants AWS Global Accelerator permission to write to the bucket.
+     * The name of the Amazon S3 bucket for the flow logs. Attribute is required if FlowLogsEnabled is true. The bucket must exist and have a bucket policy that grants Global Accelerator permission to write to the bucket.
      */
     FlowLogsS3Bucket?: GenericString;
     /**
@@ -828,7 +847,7 @@ declare namespace GlobalAccelerator {
      */
     EndpointGroupArn?: GenericString;
     /**
-     * The AWS Region where the endpoint group is located.
+     * The Amazon Web Services Region where the endpoint group is located.
      */
     EndpointGroupRegion?: GenericString;
     /**
@@ -1039,7 +1058,7 @@ declare namespace GlobalAccelerator {
      */
     EndpointId?: GenericString;
     /**
-     * The AWS Region for the endpoint group.
+     * The Amazon Web Services Region for the endpoint group.
      */
     EndpointGroupRegion?: GenericString;
     /**
@@ -1047,7 +1066,7 @@ declare namespace GlobalAccelerator {
      */
     DestinationSocketAddress?: SocketAddress;
     /**
-     * The IP address type, which must be IPv4.
+     * The IP address type that an accelerator supports. For a custom routing accelerator, the value must be IPV4.
      */
     IpAddressType?: IpAddressType;
     /**
@@ -1063,11 +1082,11 @@ declare namespace GlobalAccelerator {
      */
     EndpointId?: GenericString;
     /**
-     * The weight associated with the endpoint. When you add weights to endpoints, you configure AWS Global Accelerator to route traffic based on proportions that you specify. For example, you might specify endpoint weights of 4, 5, 5, and 6 (sum=20). The result is that 4/20 of your traffic, on average, is routed to the first endpoint, 5/20 is routed both to the second and third endpoints, and 6/20 is routed to the last endpoint. For more information, see Endpoint Weights in the AWS Global Accelerator Developer Guide.
+     * The weight associated with the endpoint. When you add weights to endpoints, you configure Global Accelerator to route traffic based on proportions that you specify. For example, you might specify endpoint weights of 4, 5, 5, and 6 (sum=20). The result is that 4/20 of your traffic, on average, is routed to the first endpoint, 5/20 is routed both to the second and third endpoints, and 6/20 is routed to the last endpoint. For more information, see Endpoint weights in the Global Accelerator Developer Guide.
      */
     Weight?: EndpointWeight;
     /**
-     * Indicates whether client IP address preservation is enabled for an Application Load Balancer endpoint. The value is true or false. The default value is true for new accelerators.  If the value is set to true, the client's IP address is preserved in the X-Forwarded-For request header as traffic travels to applications on the Application Load Balancer endpoint fronted by the accelerator. For more information, see  Preserve Client IP Addresses in AWS Global Accelerator in the AWS Global Accelerator Developer Guide.
+     * Indicates whether client IP address preservation is enabled for an endpoint. The value is true or false. The default value is true for new accelerators.  If the value is set to true, the client's IP address is preserved in the X-Forwarded-For request header as traffic travels to applications on the endpoint fronted by the accelerator. Client IP address preservation is supported, in specific Amazon Web Services Regions, for endpoints that are Application Load Balancers and Amazon EC2 instances. For more information, see  Preserve client IP addresses in Global Accelerator in the Global Accelerator Developer Guide.
      */
     ClientIPPreservationEnabled?: GenericBoolean;
   }
@@ -1078,7 +1097,7 @@ declare namespace GlobalAccelerator {
      */
     EndpointId?: GenericString;
     /**
-     * The weight associated with the endpoint. When you add weights to endpoints, you configure AWS Global Accelerator to route traffic based on proportions that you specify. For example, you might specify endpoint weights of 4, 5, 5, and 6 (sum=20). The result is that 4/20 of your traffic, on average, is routed to the first endpoint, 5/20 is routed both to the second and third endpoints, and 6/20 is routed to the last endpoint. For more information, see Endpoint Weights in the AWS Global Accelerator Developer Guide. 
+     * The weight associated with the endpoint. When you add weights to endpoints, you configure Global Accelerator to route traffic based on proportions that you specify. For example, you might specify endpoint weights of 4, 5, 5, and 6 (sum=20). The result is that 4/20 of your traffic, on average, is routed to the first endpoint, 5/20 is routed both to the second and third endpoints, and 6/20 is routed to the last endpoint. For more information, see Endpoint weights in the Global Accelerator Developer Guide. 
      */
     Weight?: EndpointWeight;
     /**
@@ -1090,7 +1109,7 @@ declare namespace GlobalAccelerator {
      */
     HealthReason?: GenericString;
     /**
-     * Indicates whether client IP address preservation is enabled for an Application Load Balancer endpoint. The value is true or false. The default value is true for new accelerators.  If the value is set to true, the client's IP address is preserved in the X-Forwarded-For request header as traffic travels to applications on the Application Load Balancer endpoint fronted by the accelerator. For more information, see  Viewing Client IP Addresses in AWS Global Accelerator in the AWS Global Accelerator Developer Guide.
+     * Indicates whether client IP address preservation is enabled for an endpoint. The value is true or false. The default value is true for new accelerators.  If the value is set to true, the client's IP address is preserved in the X-Forwarded-For request header as traffic travels to applications on the endpoint fronted by the accelerator. Client IP address preservation is supported, in specific Amazon Web Services Regions, for endpoints that are Application Load Balancers and Amazon EC2 instances. For more information, see  Preserve client IP addresses in Global Accelerator in the Global Accelerator Developer Guide.
      */
     ClientIPPreservationEnabled?: GenericBoolean;
   }
@@ -1101,7 +1120,7 @@ declare namespace GlobalAccelerator {
      */
     EndpointGroupArn?: GenericString;
     /**
-     * The AWS Region where the endpoint group is located.
+     * The Amazon Web Services Region where the endpoint group is located.
      */
     EndpointGroupRegion?: GenericString;
     /**
@@ -1109,7 +1128,7 @@ declare namespace GlobalAccelerator {
      */
     EndpointDescriptions?: EndpointDescriptions;
     /**
-     * The percentage of traffic to send to an AWS Region. Additional traffic is distributed to other endpoint groups for this listener.  Use this action to increase (dial up) or decrease (dial down) traffic to a specific Region. The percentage is applied to the traffic that would otherwise have been routed to the Region based on optimal routing. The default value is 100.
+     * The percentage of traffic to send to an Amazon Web Services Region. Additional traffic is distributed to other endpoint groups for this listener.  Use this action to increase (dial up) or decrease (dial down) traffic to a specific Region. The percentage is applied to the traffic that would otherwise have been routed to the Region based on optimal routing. The default value is 100.
      */
     TrafficDialPercentage?: TrafficDialPercentage;
     /**
@@ -1133,7 +1152,7 @@ declare namespace GlobalAccelerator {
      */
     ThresholdCount?: ThresholdCount;
     /**
-     * Allows you to override the destination ports used to route traffic to an endpoint. Using a port override lets you to map a list of external destination ports (that your users send traffic to) to a list of internal destination ports that you want an application endpoint to receive traffic on. 
+     * Allows you to override the destination ports used to route traffic to an endpoint. Using a port override lets you map a list of external destination ports (that your users send traffic to) to a list of internal destination ports that you want an application endpoint to receive traffic on. 
      */
     PortOverrides?: PortOverrides;
   }
@@ -1149,17 +1168,22 @@ declare namespace GlobalAccelerator {
   export type HealthState = "INITIAL"|"HEALTHY"|"UNHEALTHY"|string;
   export type IdempotencyToken = string;
   export type IpAddress = string;
-  export type IpAddressType = "IPV4"|string;
+  export type IpAddressFamily = "IPv4"|"IPv6"|string;
+  export type IpAddressType = "IPV4"|"DUAL_STACK"|string;
   export type IpAddresses = IpAddress[];
   export interface IpSet {
     /**
-     * The types of IP addresses included in this IP set.
+     * IpFamily is deprecated and has been replaced by IpAddressFamily.
      */
     IpFamily?: GenericString;
     /**
      * The array of IP addresses in the IP address set. An IP address set can have a maximum of two IP addresses.
      */
     IpAddresses?: IpAddresses;
+    /**
+     * The types of IP addresses included in this IP set. 
+     */
+    IpAddressFamily?: IpAddressFamily;
   }
   export type IpSets = IpSet[];
   export interface ListAcceleratorsRequest {
@@ -1400,7 +1424,7 @@ declare namespace GlobalAccelerator {
      */
     Protocol?: Protocol;
     /**
-     * Client affinity lets you direct all requests from a user to the same endpoint, if you have stateful applications, regardless of the port and protocol of the client request. Client affinity gives you control over whether to always route each client to the same specific endpoint. AWS Global Accelerator uses a consistent-flow hashing algorithm to choose the optimal endpoint for a connection. If client affinity is NONE, Global Accelerator uses the "five-tuple" (5-tuple) properties—source IP address, source port, destination IP address, destination port, and protocol—to select the hash value, and then chooses the best endpoint. However, with this setting, if someone uses different ports to connect to Global Accelerator, their connections might not be always routed to the same endpoint because the hash value changes.  If you want a given client to always be routed to the same endpoint, set client affinity to SOURCE_IP instead. When you use the SOURCE_IP setting, Global Accelerator uses the "two-tuple" (2-tuple) properties— source (client) IP address and destination IP address—to select the hash value. The default value is NONE.
+     * Client affinity lets you direct all requests from a user to the same endpoint, if you have stateful applications, regardless of the port and protocol of the client request. Client affinity gives you control over whether to always route each client to the same specific endpoint. Global Accelerator uses a consistent-flow hashing algorithm to choose the optimal endpoint for a connection. If client affinity is NONE, Global Accelerator uses the "five-tuple" (5-tuple) properties—source IP address, source port, destination IP address, destination port, and protocol—to select the hash value, and then chooses the best endpoint. However, with this setting, if someone uses different ports to connect to Global Accelerator, their connections might not be always routed to the same endpoint because the hash value changes.  If you want a given client to always be routed to the same endpoint, set client affinity to SOURCE_IP instead. When you use the SOURCE_IP setting, Global Accelerator uses the "two-tuple" (2-tuple) properties— source (client) IP address and destination IP address—to select the hash value. The default value is NONE.
      */
     ClientAffinity?: ClientAffinity;
   }
@@ -1544,15 +1568,15 @@ declare namespace GlobalAccelerator {
      */
     AcceleratorArn: GenericString;
     /**
-     * Update whether flow logs are enabled. The default value is false. If the value is true, FlowLogsS3Bucket and FlowLogsS3Prefix must be specified. For more information, see Flow Logs in the AWS Global Accelerator Developer Guide.
+     * Update whether flow logs are enabled. The default value is false. If the value is true, FlowLogsS3Bucket and FlowLogsS3Prefix must be specified. For more information, see Flow Logs in the Global Accelerator Developer Guide.
      */
     FlowLogsEnabled?: GenericBoolean;
     /**
-     * The name of the Amazon S3 bucket for the flow logs. Attribute is required if FlowLogsEnabled is true. The bucket must exist and have a bucket policy that grants AWS Global Accelerator permission to write to the bucket.
+     * The name of the Amazon S3 bucket for the flow logs. Attribute is required if FlowLogsEnabled is true. The bucket must exist and have a bucket policy that grants Global Accelerator permission to write to the bucket.
      */
     FlowLogsS3Bucket?: GenericString;
     /**
-     * Update the prefix for the location in the Amazon S3 bucket for the flow logs. Attribute is required if FlowLogsEnabled is true.  If you don’t specify a prefix, the flow logs are stored in the root of the bucket. If you specify slash (/) for the S3 bucket prefix, the log file bucket folder structure will include a double slash (//), like the following: s3-bucket_name//AWSLogs/aws_account_id
+     * Update the prefix for the location in the Amazon S3 bucket for the flow logs. Attribute is required if FlowLogsEnabled is true.  If you specify slash (/) for the S3 bucket prefix, the log file bucket folder structure will include a double slash (//), like the following: s3-bucket_name//AWSLogs/aws_account_id
      */
     FlowLogsS3Prefix?: GenericString;
   }
@@ -1568,11 +1592,11 @@ declare namespace GlobalAccelerator {
      */
     AcceleratorArn: GenericString;
     /**
-     * The name of the accelerator. The name can have a maximum of 32 characters, must contain only alphanumeric characters or hyphens (-), and must not begin or end with a hyphen.
+     * The name of the accelerator. The name can have a maximum of 64 characters, must contain only alphanumeric characters, periods (.), or hyphens (-), and must not begin or end with a hyphen or period.
      */
     Name?: GenericString;
     /**
-     * The IP address type, which must be IPv4.
+     * The IP address type that an accelerator supports. For a standard accelerator, the value can be IPV4 or DUAL_STACK.
      */
     IpAddressType?: IpAddressType;
     /**
@@ -1592,11 +1616,11 @@ declare namespace GlobalAccelerator {
      */
     AcceleratorArn: GenericString;
     /**
-     * Update whether flow logs are enabled. The default value is false. If the value is true, FlowLogsS3Bucket and FlowLogsS3Prefix must be specified. For more information, see Flow Logs in the AWS Global Accelerator Developer Guide.
+     * Update whether flow logs are enabled. The default value is false. If the value is true, FlowLogsS3Bucket and FlowLogsS3Prefix must be specified. For more information, see Flow logs in the Global Accelerator Developer Guide.
      */
     FlowLogsEnabled?: GenericBoolean;
     /**
-     * The name of the Amazon S3 bucket for the flow logs. Attribute is required if FlowLogsEnabled is true. The bucket must exist and have a bucket policy that grants AWS Global Accelerator permission to write to the bucket.
+     * The name of the Amazon S3 bucket for the flow logs. Attribute is required if FlowLogsEnabled is true. The bucket must exist and have a bucket policy that grants Global Accelerator permission to write to the bucket.
      */
     FlowLogsS3Bucket?: GenericString;
     /**
@@ -1616,11 +1640,11 @@ declare namespace GlobalAccelerator {
      */
     AcceleratorArn: GenericString;
     /**
-     * The name of the accelerator. The name can have a maximum of 32 characters, must contain only alphanumeric characters or hyphens (-), and must not begin or end with a hyphen.
+     * The name of the accelerator. The name can have a maximum of 64 characters, must contain only alphanumeric characters, periods (.), or hyphens (-), and must not begin or end with a hyphen or period.
      */
     Name?: GenericString;
     /**
-     * The value for the address type must be IPv4.
+     * The IP address type that an accelerator supports. For a custom routing accelerator, the value must be IPV4.
      */
     IpAddressType?: IpAddressType;
     /**
@@ -1660,15 +1684,15 @@ declare namespace GlobalAccelerator {
      */
     EndpointConfigurations?: EndpointConfigurations;
     /**
-     * The percentage of traffic to send to an AWS Region. Additional traffic is distributed to other endpoint groups for this listener.  Use this action to increase (dial up) or decrease (dial down) traffic to a specific Region. The percentage is applied to the traffic that would otherwise have been routed to the Region based on optimal routing. The default value is 100.
+     * The percentage of traffic to send to an Amazon Web Services Region. Additional traffic is distributed to other endpoint groups for this listener.  Use this action to increase (dial up) or decrease (dial down) traffic to a specific Region. The percentage is applied to the traffic that would otherwise have been routed to the Region based on optimal routing. The default value is 100.
      */
     TrafficDialPercentage?: TrafficDialPercentage;
     /**
-     * The port that AWS Global Accelerator uses to check the health of endpoints that are part of this endpoint group. The default port is the listener port that this endpoint group is associated with. If the listener port is a list of ports, Global Accelerator uses the first port in the list.
+     * The port that Global Accelerator uses to check the health of endpoints that are part of this endpoint group. The default port is the listener port that this endpoint group is associated with. If the listener port is a list of ports, Global Accelerator uses the first port in the list.
      */
     HealthCheckPort?: HealthCheckPort;
     /**
-     * The protocol that AWS Global Accelerator uses to check the health of endpoints that are part of this endpoint group. The default value is TCP.
+     * The protocol that Global Accelerator uses to check the health of endpoints that are part of this endpoint group. The default value is TCP.
      */
     HealthCheckProtocol?: HealthCheckProtocol;
     /**
@@ -1684,7 +1708,7 @@ declare namespace GlobalAccelerator {
      */
     ThresholdCount?: ThresholdCount;
     /**
-     * Override specific listener ports used to route traffic to endpoints that are part of this endpoint group. For example, you can create a port override in which the listener receives user traffic on ports 80 and 443, but your accelerator routes that traffic to ports 1080 and 1443, respectively, on the endpoints. For more information, see  Port overrides in the AWS Global Accelerator Developer Guide.
+     * Override specific listener ports used to route traffic to endpoints that are part of this endpoint group. For example, you can create a port override in which the listener receives user traffic on ports 80 and 443, but your accelerator routes that traffic to ports 1080 and 1443, respectively, on the endpoints. For more information, see  Overriding listener ports in the Global Accelerator Developer Guide.
      */
     PortOverrides?: PortOverrides;
   }
@@ -1708,7 +1732,7 @@ declare namespace GlobalAccelerator {
      */
     Protocol?: Protocol;
     /**
-     * Client affinity lets you direct all requests from a user to the same endpoint, if you have stateful applications, regardless of the port and protocol of the client request. Client affinity gives you control over whether to always route each client to the same specific endpoint. AWS Global Accelerator uses a consistent-flow hashing algorithm to choose the optimal endpoint for a connection. If client affinity is NONE, Global Accelerator uses the "five-tuple" (5-tuple) properties—source IP address, source port, destination IP address, destination port, and protocol—to select the hash value, and then chooses the best endpoint. However, with this setting, if someone uses different ports to connect to Global Accelerator, their connections might not be always routed to the same endpoint because the hash value changes.  If you want a given client to always be routed to the same endpoint, set client affinity to SOURCE_IP instead. When you use the SOURCE_IP setting, Global Accelerator uses the "two-tuple" (2-tuple) properties— source (client) IP address and destination IP address—to select the hash value. The default value is NONE.
+     * Client affinity lets you direct all requests from a user to the same endpoint, if you have stateful applications, regardless of the port and protocol of the client request. Client affinity gives you control over whether to always route each client to the same specific endpoint. Global Accelerator uses a consistent-flow hashing algorithm to choose the optimal endpoint for a connection. If client affinity is NONE, Global Accelerator uses the "five-tuple" (5-tuple) properties—source IP address, source port, destination IP address, destination port, and protocol—to select the hash value, and then chooses the best endpoint. However, with this setting, if someone uses different ports to connect to Global Accelerator, their connections might not be always routed to the same endpoint because the hash value changes.  If you want a given client to always be routed to the same endpoint, set client affinity to SOURCE_IP instead. When you use the SOURCE_IP setting, Global Accelerator uses the "two-tuple" (2-tuple) properties— source (client) IP address and destination IP address—to select the hash value. The default value is NONE.
      */
     ClientAffinity?: ClientAffinity;
   }