cdk-comprehend-s3olap 2.0.40 → 2.0.43

package/node_modules/aws-sdk/clients/kms.d.ts

@@ -36,11 +36,11 @@ declare class KMS extends Service {
    */
   createAlias(callback?: (err: AWSError, data: {}) => void): Request<{}, AWSError>;
   /**
-   * Creates a custom key store that is associated with an CloudHSM cluster that you own and manage. This operation is part of the Custom Key Store feature feature in KMS, which combines the convenience and extensive integration of KMS with the isolation and control of a single-tenant key store. Before you create the custom key store, you must assemble the required elements, including an CloudHSM cluster that fulfills the requirements for a custom key store. For details about the required elements, see Assemble the Prerequisites in the Key Management Service Developer Guide. When the operation completes successfully, it returns the ID of the new custom key store. Before you can use your new custom key store, you need to use the ConnectCustomKeyStore operation to connect the new key store to its CloudHSM cluster. Even if you are not going to use your custom key store immediately, you might want to connect it to verify that all settings are correct and then disconnect it until you are ready to use it. For help with failures, see Troubleshooting a Custom Key Store in the Key Management Service Developer Guide.  Cross-account use: No. You cannot perform this operation on a custom key store in a different Amazon Web Services account.  Required permissions: kms:CreateCustomKeyStore (IAM policy).  Related operations:     ConnectCustomKeyStore     DeleteCustomKeyStore     DescribeCustomKeyStores     DisconnectCustomKeyStore     UpdateCustomKeyStore   
+   * Creates a custom key store that is associated with an CloudHSM cluster that you own and manage. This operation is part of the custom key store feature feature in KMS, which combines the convenience and extensive integration of KMS with the isolation and control of a single-tenant key store. Before you create the custom key store, you must assemble the required elements, including an CloudHSM cluster that fulfills the requirements for a custom key store. For details about the required elements, see Assemble the Prerequisites in the Key Management Service Developer Guide. When the operation completes successfully, it returns the ID of the new custom key store. Before you can use your new custom key store, you need to use the ConnectCustomKeyStore operation to connect the new key store to its CloudHSM cluster. Even if you are not going to use your custom key store immediately, you might want to connect it to verify that all settings are correct and then disconnect it until you are ready to use it. For help with failures, see Troubleshooting a Custom Key Store in the Key Management Service Developer Guide.  Cross-account use: No. You cannot perform this operation on a custom key store in a different Amazon Web Services account.  Required permissions: kms:CreateCustomKeyStore (IAM policy).  Related operations:     ConnectCustomKeyStore     DeleteCustomKeyStore     DescribeCustomKeyStores     DisconnectCustomKeyStore     UpdateCustomKeyStore   
    */
   createCustomKeyStore(params: KMS.Types.CreateCustomKeyStoreRequest, callback?: (err: AWSError, data: KMS.Types.CreateCustomKeyStoreResponse) => void): Request<KMS.Types.CreateCustomKeyStoreResponse, AWSError>;
   /**
-   * Creates a custom key store that is associated with an CloudHSM cluster that you own and manage. This operation is part of the Custom Key Store feature feature in KMS, which combines the convenience and extensive integration of KMS with the isolation and control of a single-tenant key store. Before you create the custom key store, you must assemble the required elements, including an CloudHSM cluster that fulfills the requirements for a custom key store. For details about the required elements, see Assemble the Prerequisites in the Key Management Service Developer Guide. When the operation completes successfully, it returns the ID of the new custom key store. Before you can use your new custom key store, you need to use the ConnectCustomKeyStore operation to connect the new key store to its CloudHSM cluster. Even if you are not going to use your custom key store immediately, you might want to connect it to verify that all settings are correct and then disconnect it until you are ready to use it. For help with failures, see Troubleshooting a Custom Key Store in the Key Management Service Developer Guide.  Cross-account use: No. You cannot perform this operation on a custom key store in a different Amazon Web Services account.  Required permissions: kms:CreateCustomKeyStore (IAM policy).  Related operations:     ConnectCustomKeyStore     DeleteCustomKeyStore     DescribeCustomKeyStores     DisconnectCustomKeyStore     UpdateCustomKeyStore   
+   * Creates a custom key store that is associated with an CloudHSM cluster that you own and manage. This operation is part of the custom key store feature feature in KMS, which combines the convenience and extensive integration of KMS with the isolation and control of a single-tenant key store. Before you create the custom key store, you must assemble the required elements, including an CloudHSM cluster that fulfills the requirements for a custom key store. For details about the required elements, see Assemble the Prerequisites in the Key Management Service Developer Guide. When the operation completes successfully, it returns the ID of the new custom key store. Before you can use your new custom key store, you need to use the ConnectCustomKeyStore operation to connect the new key store to its CloudHSM cluster. Even if you are not going to use your custom key store immediately, you might want to connect it to verify that all settings are correct and then disconnect it until you are ready to use it. For help with failures, see Troubleshooting a Custom Key Store in the Key Management Service Developer Guide.  Cross-account use: No. You cannot perform this operation on a custom key store in a different Amazon Web Services account.  Required permissions: kms:CreateCustomKeyStore (IAM policy).  Related operations:     ConnectCustomKeyStore     DeleteCustomKeyStore     DescribeCustomKeyStores     DisconnectCustomKeyStore     UpdateCustomKeyStore   
    */
   createCustomKeyStore(callback?: (err: AWSError, data: KMS.Types.CreateCustomKeyStoreResponse) => void): Request<KMS.Types.CreateCustomKeyStoreResponse, AWSError>;
   /**
@@ -52,11 +52,11 @@ declare class KMS extends Service {
    */
   createGrant(callback?: (err: AWSError, data: KMS.Types.CreateGrantResponse) => void): Request<KMS.Types.CreateGrantResponse, AWSError>;
   /**
-   * Creates a unique customer managed KMS key in your Amazon Web Services account and Region. In addition to the required parameters, you can use the optional parameters to specify a key policy, description, tags, and other useful elements for any key type.  KMS is replacing the term customer master key (CMK) with KMS key and KMS key. The concept has not changed. To prevent breaking changes, KMS is keeping some variations of this term.  To create different types of KMS keys, use the following guidance:  Symmetric encryption KMS key  To create a symmetric encryption KMS key, you aren't required to specify any parameters. The default value for KeySpec, SYMMETRIC_DEFAULT, and the default value for KeyUsage, ENCRYPT_DECRYPT, create a symmetric encryption KMS key. If you need a key for basic encryption and decryption or you are creating a KMS key to protect your resources in an Amazon Web Services service, create a symmetric encryption KMS key. The key material in a symmetric encryption key never leaves KMS unencrypted. You can use a symmetric encryption KMS key to encrypt and decrypt data up to 4,096 bytes, but they are typically used to generate data keys and data keys pairs. For details, see GenerateDataKey and GenerateDataKeyPair.    Asymmetric KMS keys  To create an asymmetric KMS key, use the KeySpec parameter to specify the type of key material in the KMS key. Then, use the KeyUsage parameter to determine whether the KMS key will be used to encrypt and decrypt or sign and verify. You can't change these properties after the KMS key is created. Asymmetric KMS keys contain an RSA key pair or an Elliptic Curve (ECC) key pair. The private key in an asymmetric KMS key never leaves KMS unencrypted. However, you can use the GetPublicKey operation to download the public key so it can be used outside of KMS. KMS keys with RSA key pairs can be used to encrypt or decrypt data or sign and verify messages (but not both). KMS keys with ECC key pairs can be used only to sign and verify messages. For information about asymmetric KMS keys, see Asymmetric KMS keys in the Key Management Service Developer Guide.    HMAC KMS key  To create an HMAC KMS key, set the KeySpec parameter to a key spec value for HMAC KMS keys. Then set the KeyUsage parameter to GENERATE_VERIFY_MAC. You must set the key usage even though GENERATE_VERIFY_MAC is the only valid key usage value for HMAC KMS keys. You can't change these properties after the KMS key is created. HMAC KMS keys are symmetric keys that never leave KMS unencrypted. You can use HMAC keys to generate (GenerateMac) and verify (VerifyMac) HMAC codes for messages up to 4096 bytes. HMAC KMS keys are not supported in all Amazon Web Services Regions. If you try to create an HMAC KMS key in an Amazon Web Services Region in which HMAC keys are not supported, the CreateKey operation returns an UnsupportedOperationException. For a list of Regions in which HMAC KMS keys are supported, see HMAC keys in KMS in the Key Management Service Developer Guide.    Multi-Region primary keys Imported key material  To create a multi-Region primary key in the local Amazon Web Services Region, use the MultiRegion parameter with a value of True. To create a multi-Region replica key, that is, a KMS key with the same key ID and key material as a primary key, but in a different Amazon Web Services Region, use the ReplicateKey operation. To change a replica key to a primary key, and its primary key to a replica key, use the UpdatePrimaryRegion operation. You can create multi-Region KMS keys for all supported KMS key types: symmetric encryption KMS keys, HMAC KMS keys, asymmetric encryption KMS keys, and asymmetric signing KMS keys. You can also create multi-Region keys with imported key material. However, you can't create multi-Region keys in a custom key store. This operation supports multi-Region keys, an KMS feature that lets you create multiple interoperable KMS keys in different Amazon Web Services Regions. Because these KMS keys have the same key ID, key material, and other metadata, you can use them interchangeably to encrypt data in one Amazon Web Services Region and decrypt it in a different Amazon Web Services Region without re-encrypting the data or making a cross-Region call. For more information about multi-Region keys, see Multi-Region keys in KMS in the Key Management Service Developer Guide.     To import your own key material, begin by creating a symmetric encryption KMS key with no key material. To do this, use the Origin parameter of CreateKey with a value of EXTERNAL. Next, use GetParametersForImport operation to get a public key and import token, and use the public key to encrypt your key material. Then, use ImportKeyMaterial with your import token to import the key material. For step-by-step instructions, see Importing Key Material in the  Key Management Service Developer Guide . This feature supports only symmetric encryption KMS keys, including multi-Region symmetric encryption KMS keys. You cannot import key material into any other type of KMS key. To create a multi-Region primary key with imported key material, use the Origin parameter of CreateKey with a value of EXTERNAL and the MultiRegion parameter with a value of True. To create replicas of the multi-Region primary key, use the ReplicateKey operation. For more information about multi-Region keys, see Multi-Region keys in KMS in the Key Management Service Developer Guide.    Custom key store  To create a symmetric encryption KMS key in a custom key store, use the CustomKeyStoreId parameter to specify the custom key store. You must also use the Origin parameter with a value of AWS_CLOUDHSM. The CloudHSM cluster that is associated with the custom key store must have at least two active HSMs in different Availability Zones in the Amazon Web Services Region.  Custom key stores support only symmetric encryption KMS keys. You cannot create an HMAC KMS key or an asymmetric KMS key in a custom key store. For information about custom key stores in KMS see Custom key stores in KMS in the  Key Management Service Developer Guide .    Cross-account use: No. You cannot use this operation to create a KMS key in a different Amazon Web Services account.  Required permissions: kms:CreateKey (IAM policy). To use the Tags parameter, kms:TagResource (IAM policy). For examples and information about related permissions, see Allow a user to create KMS keys in the Key Management Service Developer Guide.  Related operations:     DescribeKey     ListKeys     ScheduleKeyDeletion   
+   * Creates a unique customer managed KMS key in your Amazon Web Services account and Region. In addition to the required parameters, you can use the optional parameters to specify a key policy, description, tags, and other useful elements for any key type.  KMS is replacing the term customer master key (CMK) with KMS key and KMS key. The concept has not changed. To prevent breaking changes, KMS is keeping some variations of this term.  To create different types of KMS keys, use the following guidance:  Symmetric encryption KMS key  To create a symmetric encryption KMS key, you aren't required to specify any parameters. The default value for KeySpec, SYMMETRIC_DEFAULT, and the default value for KeyUsage, ENCRYPT_DECRYPT, create a symmetric encryption KMS key. For technical details, see  SYMMETRIC_DEFAULT key spec in the Key Management Service Developer Guide. If you need a key for basic encryption and decryption or you are creating a KMS key to protect your resources in an Amazon Web Services service, create a symmetric encryption KMS key. The key material in a symmetric encryption key never leaves KMS unencrypted. You can use a symmetric encryption KMS key to encrypt and decrypt data up to 4,096 bytes, but they are typically used to generate data keys and data keys pairs. For details, see GenerateDataKey and GenerateDataKeyPair.    Asymmetric KMS keys  To create an asymmetric KMS key, use the KeySpec parameter to specify the type of key material in the KMS key. Then, use the KeyUsage parameter to determine whether the KMS key will be used to encrypt and decrypt or sign and verify. You can't change these properties after the KMS key is created. Asymmetric KMS keys contain an RSA key pair, Elliptic Curve (ECC) key pair, or an SM2 key pair (China Regions only). The private key in an asymmetric KMS key never leaves KMS unencrypted. However, you can use the GetPublicKey operation to download the public key so it can be used outside of KMS. KMS keys with RSA or SM2 key pairs can be used to encrypt or decrypt data or sign and verify messages (but not both). KMS keys with ECC key pairs can be used only to sign and verify messages. For information about asymmetric KMS keys, see Asymmetric KMS keys in the Key Management Service Developer Guide.    HMAC KMS key  To create an HMAC KMS key, set the KeySpec parameter to a key spec value for HMAC KMS keys. Then set the KeyUsage parameter to GENERATE_VERIFY_MAC. You must set the key usage even though GENERATE_VERIFY_MAC is the only valid key usage value for HMAC KMS keys. You can't change these properties after the KMS key is created. HMAC KMS keys are symmetric keys that never leave KMS unencrypted. You can use HMAC keys to generate (GenerateMac) and verify (VerifyMac) HMAC codes for messages up to 4096 bytes. HMAC KMS keys are not supported in all Amazon Web Services Regions. If you try to create an HMAC KMS key in an Amazon Web Services Region in which HMAC keys are not supported, the CreateKey operation returns an UnsupportedOperationException. For a list of Regions in which HMAC KMS keys are supported, see HMAC keys in KMS in the Key Management Service Developer Guide.    Multi-Region primary keys Imported key material  To create a multi-Region primary key in the local Amazon Web Services Region, use the MultiRegion parameter with a value of True. To create a multi-Region replica key, that is, a KMS key with the same key ID and key material as a primary key, but in a different Amazon Web Services Region, use the ReplicateKey operation. To change a replica key to a primary key, and its primary key to a replica key, use the UpdatePrimaryRegion operation. You can create multi-Region KMS keys for all supported KMS key types: symmetric encryption KMS keys, HMAC KMS keys, asymmetric encryption KMS keys, and asymmetric signing KMS keys. You can also create multi-Region keys with imported key material. However, you can't create multi-Region keys in a custom key store. This operation supports multi-Region keys, an KMS feature that lets you create multiple interoperable KMS keys in different Amazon Web Services Regions. Because these KMS keys have the same key ID, key material, and other metadata, you can use them interchangeably to encrypt data in one Amazon Web Services Region and decrypt it in a different Amazon Web Services Region without re-encrypting the data or making a cross-Region call. For more information about multi-Region keys, see Multi-Region keys in KMS in the Key Management Service Developer Guide.     To import your own key material, begin by creating a symmetric encryption KMS key with no key material. To do this, use the Origin parameter of CreateKey with a value of EXTERNAL. Next, use GetParametersForImport operation to get a public key and import token, and use the public key to encrypt your key material. Then, use ImportKeyMaterial with your import token to import the key material. For step-by-step instructions, see Importing Key Material in the  Key Management Service Developer Guide . This feature supports only symmetric encryption KMS keys, including multi-Region symmetric encryption KMS keys. You cannot import key material into any other type of KMS key. To create a multi-Region primary key with imported key material, use the Origin parameter of CreateKey with a value of EXTERNAL and the MultiRegion parameter with a value of True. To create replicas of the multi-Region primary key, use the ReplicateKey operation. For more information about multi-Region keys, see Multi-Region keys in KMS in the Key Management Service Developer Guide.    Custom key store  To create a symmetric encryption KMS key in a custom key store, use the CustomKeyStoreId parameter to specify the custom key store. You must also use the Origin parameter with a value of AWS_CLOUDHSM. The CloudHSM cluster that is associated with the custom key store must have at least two active HSMs in different Availability Zones in the Amazon Web Services Region.  Custom key stores support only symmetric encryption KMS keys. You cannot create an HMAC KMS key or an asymmetric KMS key in a custom key store. For information about custom key stores in KMS see Custom key stores in KMS in the  Key Management Service Developer Guide .    Cross-account use: No. You cannot use this operation to create a KMS key in a different Amazon Web Services account.  Required permissions: kms:CreateKey (IAM policy). To use the Tags parameter, kms:TagResource (IAM policy). For examples and information about related permissions, see Allow a user to create KMS keys in the Key Management Service Developer Guide.  Related operations:     DescribeKey     ListKeys     ScheduleKeyDeletion   
    */
   createKey(params: KMS.Types.CreateKeyRequest, callback?: (err: AWSError, data: KMS.Types.CreateKeyResponse) => void): Request<KMS.Types.CreateKeyResponse, AWSError>;
   /**
-   * Creates a unique customer managed KMS key in your Amazon Web Services account and Region. In addition to the required parameters, you can use the optional parameters to specify a key policy, description, tags, and other useful elements for any key type.  KMS is replacing the term customer master key (CMK) with KMS key and KMS key. The concept has not changed. To prevent breaking changes, KMS is keeping some variations of this term.  To create different types of KMS keys, use the following guidance:  Symmetric encryption KMS key  To create a symmetric encryption KMS key, you aren't required to specify any parameters. The default value for KeySpec, SYMMETRIC_DEFAULT, and the default value for KeyUsage, ENCRYPT_DECRYPT, create a symmetric encryption KMS key. If you need a key for basic encryption and decryption or you are creating a KMS key to protect your resources in an Amazon Web Services service, create a symmetric encryption KMS key. The key material in a symmetric encryption key never leaves KMS unencrypted. You can use a symmetric encryption KMS key to encrypt and decrypt data up to 4,096 bytes, but they are typically used to generate data keys and data keys pairs. For details, see GenerateDataKey and GenerateDataKeyPair.    Asymmetric KMS keys  To create an asymmetric KMS key, use the KeySpec parameter to specify the type of key material in the KMS key. Then, use the KeyUsage parameter to determine whether the KMS key will be used to encrypt and decrypt or sign and verify. You can't change these properties after the KMS key is created. Asymmetric KMS keys contain an RSA key pair or an Elliptic Curve (ECC) key pair. The private key in an asymmetric KMS key never leaves KMS unencrypted. However, you can use the GetPublicKey operation to download the public key so it can be used outside of KMS. KMS keys with RSA key pairs can be used to encrypt or decrypt data or sign and verify messages (but not both). KMS keys with ECC key pairs can be used only to sign and verify messages. For information about asymmetric KMS keys, see Asymmetric KMS keys in the Key Management Service Developer Guide.    HMAC KMS key  To create an HMAC KMS key, set the KeySpec parameter to a key spec value for HMAC KMS keys. Then set the KeyUsage parameter to GENERATE_VERIFY_MAC. You must set the key usage even though GENERATE_VERIFY_MAC is the only valid key usage value for HMAC KMS keys. You can't change these properties after the KMS key is created. HMAC KMS keys are symmetric keys that never leave KMS unencrypted. You can use HMAC keys to generate (GenerateMac) and verify (VerifyMac) HMAC codes for messages up to 4096 bytes. HMAC KMS keys are not supported in all Amazon Web Services Regions. If you try to create an HMAC KMS key in an Amazon Web Services Region in which HMAC keys are not supported, the CreateKey operation returns an UnsupportedOperationException. For a list of Regions in which HMAC KMS keys are supported, see HMAC keys in KMS in the Key Management Service Developer Guide.    Multi-Region primary keys Imported key material  To create a multi-Region primary key in the local Amazon Web Services Region, use the MultiRegion parameter with a value of True. To create a multi-Region replica key, that is, a KMS key with the same key ID and key material as a primary key, but in a different Amazon Web Services Region, use the ReplicateKey operation. To change a replica key to a primary key, and its primary key to a replica key, use the UpdatePrimaryRegion operation. You can create multi-Region KMS keys for all supported KMS key types: symmetric encryption KMS keys, HMAC KMS keys, asymmetric encryption KMS keys, and asymmetric signing KMS keys. You can also create multi-Region keys with imported key material. However, you can't create multi-Region keys in a custom key store. This operation supports multi-Region keys, an KMS feature that lets you create multiple interoperable KMS keys in different Amazon Web Services Regions. Because these KMS keys have the same key ID, key material, and other metadata, you can use them interchangeably to encrypt data in one Amazon Web Services Region and decrypt it in a different Amazon Web Services Region without re-encrypting the data or making a cross-Region call. For more information about multi-Region keys, see Multi-Region keys in KMS in the Key Management Service Developer Guide.     To import your own key material, begin by creating a symmetric encryption KMS key with no key material. To do this, use the Origin parameter of CreateKey with a value of EXTERNAL. Next, use GetParametersForImport operation to get a public key and import token, and use the public key to encrypt your key material. Then, use ImportKeyMaterial with your import token to import the key material. For step-by-step instructions, see Importing Key Material in the  Key Management Service Developer Guide . This feature supports only symmetric encryption KMS keys, including multi-Region symmetric encryption KMS keys. You cannot import key material into any other type of KMS key. To create a multi-Region primary key with imported key material, use the Origin parameter of CreateKey with a value of EXTERNAL and the MultiRegion parameter with a value of True. To create replicas of the multi-Region primary key, use the ReplicateKey operation. For more information about multi-Region keys, see Multi-Region keys in KMS in the Key Management Service Developer Guide.    Custom key store  To create a symmetric encryption KMS key in a custom key store, use the CustomKeyStoreId parameter to specify the custom key store. You must also use the Origin parameter with a value of AWS_CLOUDHSM. The CloudHSM cluster that is associated with the custom key store must have at least two active HSMs in different Availability Zones in the Amazon Web Services Region.  Custom key stores support only symmetric encryption KMS keys. You cannot create an HMAC KMS key or an asymmetric KMS key in a custom key store. For information about custom key stores in KMS see Custom key stores in KMS in the  Key Management Service Developer Guide .    Cross-account use: No. You cannot use this operation to create a KMS key in a different Amazon Web Services account.  Required permissions: kms:CreateKey (IAM policy). To use the Tags parameter, kms:TagResource (IAM policy). For examples and information about related permissions, see Allow a user to create KMS keys in the Key Management Service Developer Guide.  Related operations:     DescribeKey     ListKeys     ScheduleKeyDeletion   
+   * Creates a unique customer managed KMS key in your Amazon Web Services account and Region. In addition to the required parameters, you can use the optional parameters to specify a key policy, description, tags, and other useful elements for any key type.  KMS is replacing the term customer master key (CMK) with KMS key and KMS key. The concept has not changed. To prevent breaking changes, KMS is keeping some variations of this term.  To create different types of KMS keys, use the following guidance:  Symmetric encryption KMS key  To create a symmetric encryption KMS key, you aren't required to specify any parameters. The default value for KeySpec, SYMMETRIC_DEFAULT, and the default value for KeyUsage, ENCRYPT_DECRYPT, create a symmetric encryption KMS key. For technical details, see  SYMMETRIC_DEFAULT key spec in the Key Management Service Developer Guide. If you need a key for basic encryption and decryption or you are creating a KMS key to protect your resources in an Amazon Web Services service, create a symmetric encryption KMS key. The key material in a symmetric encryption key never leaves KMS unencrypted. You can use a symmetric encryption KMS key to encrypt and decrypt data up to 4,096 bytes, but they are typically used to generate data keys and data keys pairs. For details, see GenerateDataKey and GenerateDataKeyPair.    Asymmetric KMS keys  To create an asymmetric KMS key, use the KeySpec parameter to specify the type of key material in the KMS key. Then, use the KeyUsage parameter to determine whether the KMS key will be used to encrypt and decrypt or sign and verify. You can't change these properties after the KMS key is created. Asymmetric KMS keys contain an RSA key pair, Elliptic Curve (ECC) key pair, or an SM2 key pair (China Regions only). The private key in an asymmetric KMS key never leaves KMS unencrypted. However, you can use the GetPublicKey operation to download the public key so it can be used outside of KMS. KMS keys with RSA or SM2 key pairs can be used to encrypt or decrypt data or sign and verify messages (but not both). KMS keys with ECC key pairs can be used only to sign and verify messages. For information about asymmetric KMS keys, see Asymmetric KMS keys in the Key Management Service Developer Guide.    HMAC KMS key  To create an HMAC KMS key, set the KeySpec parameter to a key spec value for HMAC KMS keys. Then set the KeyUsage parameter to GENERATE_VERIFY_MAC. You must set the key usage even though GENERATE_VERIFY_MAC is the only valid key usage value for HMAC KMS keys. You can't change these properties after the KMS key is created. HMAC KMS keys are symmetric keys that never leave KMS unencrypted. You can use HMAC keys to generate (GenerateMac) and verify (VerifyMac) HMAC codes for messages up to 4096 bytes. HMAC KMS keys are not supported in all Amazon Web Services Regions. If you try to create an HMAC KMS key in an Amazon Web Services Region in which HMAC keys are not supported, the CreateKey operation returns an UnsupportedOperationException. For a list of Regions in which HMAC KMS keys are supported, see HMAC keys in KMS in the Key Management Service Developer Guide.    Multi-Region primary keys Imported key material  To create a multi-Region primary key in the local Amazon Web Services Region, use the MultiRegion parameter with a value of True. To create a multi-Region replica key, that is, a KMS key with the same key ID and key material as a primary key, but in a different Amazon Web Services Region, use the ReplicateKey operation. To change a replica key to a primary key, and its primary key to a replica key, use the UpdatePrimaryRegion operation. You can create multi-Region KMS keys for all supported KMS key types: symmetric encryption KMS keys, HMAC KMS keys, asymmetric encryption KMS keys, and asymmetric signing KMS keys. You can also create multi-Region keys with imported key material. However, you can't create multi-Region keys in a custom key store. This operation supports multi-Region keys, an KMS feature that lets you create multiple interoperable KMS keys in different Amazon Web Services Regions. Because these KMS keys have the same key ID, key material, and other metadata, you can use them interchangeably to encrypt data in one Amazon Web Services Region and decrypt it in a different Amazon Web Services Region without re-encrypting the data or making a cross-Region call. For more information about multi-Region keys, see Multi-Region keys in KMS in the Key Management Service Developer Guide.     To import your own key material, begin by creating a symmetric encryption KMS key with no key material. To do this, use the Origin parameter of CreateKey with a value of EXTERNAL. Next, use GetParametersForImport operation to get a public key and import token, and use the public key to encrypt your key material. Then, use ImportKeyMaterial with your import token to import the key material. For step-by-step instructions, see Importing Key Material in the  Key Management Service Developer Guide . This feature supports only symmetric encryption KMS keys, including multi-Region symmetric encryption KMS keys. You cannot import key material into any other type of KMS key. To create a multi-Region primary key with imported key material, use the Origin parameter of CreateKey with a value of EXTERNAL and the MultiRegion parameter with a value of True. To create replicas of the multi-Region primary key, use the ReplicateKey operation. For more information about multi-Region keys, see Multi-Region keys in KMS in the Key Management Service Developer Guide.    Custom key store  To create a symmetric encryption KMS key in a custom key store, use the CustomKeyStoreId parameter to specify the custom key store. You must also use the Origin parameter with a value of AWS_CLOUDHSM. The CloudHSM cluster that is associated with the custom key store must have at least two active HSMs in different Availability Zones in the Amazon Web Services Region.  Custom key stores support only symmetric encryption KMS keys. You cannot create an HMAC KMS key or an asymmetric KMS key in a custom key store. For information about custom key stores in KMS see Custom key stores in KMS in the  Key Management Service Developer Guide .    Cross-account use: No. You cannot use this operation to create a KMS key in a different Amazon Web Services account.  Required permissions: kms:CreateKey (IAM policy). To use the Tags parameter, kms:TagResource (IAM policy). For examples and information about related permissions, see Allow a user to create KMS keys in the Key Management Service Developer Guide.  Related operations:     DescribeKey     ListKeys     ScheduleKeyDeletion   
    */
   createKey(callback?: (err: AWSError, data: KMS.Types.CreateKeyResponse) => void): Request<KMS.Types.CreateKeyResponse, AWSError>;
   /**
@@ -76,11 +76,11 @@ declare class KMS extends Service {
    */
   deleteAlias(callback?: (err: AWSError, data: {}) => void): Request<{}, AWSError>;
   /**
-   * Deletes a custom key store. This operation does not delete the CloudHSM cluster that is associated with the custom key store, or affect any users or keys in the cluster. The custom key store that you delete cannot contain any KMS KMS keys. Before deleting the key store, verify that you will never need to use any of the KMS keys in the key store for any cryptographic operations. Then, use ScheduleKeyDeletion to delete the KMS keys from the key store. When the scheduled waiting period expires, the ScheduleKeyDeletion operation deletes the KMS keys. Then it makes a best effort to delete the key material from the associated cluster. However, you might need to manually delete the orphaned key material from the cluster and its backups. After all KMS keys are deleted from KMS, use DisconnectCustomKeyStore to disconnect the key store from KMS. Then, you can delete the custom key store. Instead of deleting the custom key store, consider using DisconnectCustomKeyStore to disconnect it from KMS. While the key store is disconnected, you cannot create or use the KMS keys in the key store. But, you do not need to delete KMS keys and you can reconnect a disconnected custom key store at any time. If the operation succeeds, it returns a JSON object with no properties. This operation is part of the Custom Key Store feature feature in KMS, which combines the convenience and extensive integration of KMS with the isolation and control of a single-tenant key store.  Cross-account use: No. You cannot perform this operation on a custom key store in a different Amazon Web Services account.  Required permissions: kms:DeleteCustomKeyStore (IAM policy)  Related operations:     ConnectCustomKeyStore     CreateCustomKeyStore     DescribeCustomKeyStores     DisconnectCustomKeyStore     UpdateCustomKeyStore   
+   * Deletes a custom key store. This operation does not delete the CloudHSM cluster that is associated with the custom key store, or affect any users or keys in the cluster. The custom key store that you delete cannot contain any KMS keys. Before deleting the key store, verify that you will never need to use any of the KMS keys in the key store for any cryptographic operations. Then, use ScheduleKeyDeletion to delete the KMS keys from the key store. When the scheduled waiting period expires, the ScheduleKeyDeletion operation deletes the KMS keys. Then it makes a best effort to delete the key material from the associated cluster. However, you might need to manually delete the orphaned key material from the cluster and its backups. After all KMS keys are deleted from KMS, use DisconnectCustomKeyStore to disconnect the key store from KMS. Then, you can delete the custom key store. Instead of deleting the custom key store, consider using DisconnectCustomKeyStore to disconnect it from KMS. While the key store is disconnected, you cannot create or use the KMS keys in the key store. But, you do not need to delete KMS keys and you can reconnect a disconnected custom key store at any time. If the operation succeeds, it returns a JSON object with no properties. This operation is part of the custom key store feature feature in KMS, which combines the convenience and extensive integration of KMS with the isolation and control of a single-tenant key store.  Cross-account use: No. You cannot perform this operation on a custom key store in a different Amazon Web Services account.  Required permissions: kms:DeleteCustomKeyStore (IAM policy)  Related operations:     ConnectCustomKeyStore     CreateCustomKeyStore     DescribeCustomKeyStores     DisconnectCustomKeyStore     UpdateCustomKeyStore   
    */
   deleteCustomKeyStore(params: KMS.Types.DeleteCustomKeyStoreRequest, callback?: (err: AWSError, data: KMS.Types.DeleteCustomKeyStoreResponse) => void): Request<KMS.Types.DeleteCustomKeyStoreResponse, AWSError>;
   /**
-   * Deletes a custom key store. This operation does not delete the CloudHSM cluster that is associated with the custom key store, or affect any users or keys in the cluster. The custom key store that you delete cannot contain any KMS KMS keys. Before deleting the key store, verify that you will never need to use any of the KMS keys in the key store for any cryptographic operations. Then, use ScheduleKeyDeletion to delete the KMS keys from the key store. When the scheduled waiting period expires, the ScheduleKeyDeletion operation deletes the KMS keys. Then it makes a best effort to delete the key material from the associated cluster. However, you might need to manually delete the orphaned key material from the cluster and its backups. After all KMS keys are deleted from KMS, use DisconnectCustomKeyStore to disconnect the key store from KMS. Then, you can delete the custom key store. Instead of deleting the custom key store, consider using DisconnectCustomKeyStore to disconnect it from KMS. While the key store is disconnected, you cannot create or use the KMS keys in the key store. But, you do not need to delete KMS keys and you can reconnect a disconnected custom key store at any time. If the operation succeeds, it returns a JSON object with no properties. This operation is part of the Custom Key Store feature feature in KMS, which combines the convenience and extensive integration of KMS with the isolation and control of a single-tenant key store.  Cross-account use: No. You cannot perform this operation on a custom key store in a different Amazon Web Services account.  Required permissions: kms:DeleteCustomKeyStore (IAM policy)  Related operations:     ConnectCustomKeyStore     CreateCustomKeyStore     DescribeCustomKeyStores     DisconnectCustomKeyStore     UpdateCustomKeyStore   
+   * Deletes a custom key store. This operation does not delete the CloudHSM cluster that is associated with the custom key store, or affect any users or keys in the cluster. The custom key store that you delete cannot contain any KMS keys. Before deleting the key store, verify that you will never need to use any of the KMS keys in the key store for any cryptographic operations. Then, use ScheduleKeyDeletion to delete the KMS keys from the key store. When the scheduled waiting period expires, the ScheduleKeyDeletion operation deletes the KMS keys. Then it makes a best effort to delete the key material from the associated cluster. However, you might need to manually delete the orphaned key material from the cluster and its backups. After all KMS keys are deleted from KMS, use DisconnectCustomKeyStore to disconnect the key store from KMS. Then, you can delete the custom key store. Instead of deleting the custom key store, consider using DisconnectCustomKeyStore to disconnect it from KMS. While the key store is disconnected, you cannot create or use the KMS keys in the key store. But, you do not need to delete KMS keys and you can reconnect a disconnected custom key store at any time. If the operation succeeds, it returns a JSON object with no properties. This operation is part of the custom key store feature feature in KMS, which combines the convenience and extensive integration of KMS with the isolation and control of a single-tenant key store.  Cross-account use: No. You cannot perform this operation on a custom key store in a different Amazon Web Services account.  Required permissions: kms:DeleteCustomKeyStore (IAM policy)  Related operations:     ConnectCustomKeyStore     CreateCustomKeyStore     DescribeCustomKeyStores     DisconnectCustomKeyStore     UpdateCustomKeyStore   
    */
   deleteCustomKeyStore(callback?: (err: AWSError, data: KMS.Types.DeleteCustomKeyStoreResponse) => void): Request<KMS.Types.DeleteCustomKeyStoreResponse, AWSError>;
   /**
@@ -92,19 +92,19 @@ declare class KMS extends Service {
    */
   deleteImportedKeyMaterial(callback?: (err: AWSError, data: {}) => void): Request<{}, AWSError>;
   /**
-   * Gets information about custom key stores in the account and Region. This operation is part of the Custom Key Store feature feature in KMS, which combines the convenience and extensive integration of KMS with the isolation and control of a single-tenant key store. By default, this operation returns information about all custom key stores in the account and Region. To get only information about a particular custom key store, use either the CustomKeyStoreName or CustomKeyStoreId parameter (but not both). To determine whether the custom key store is connected to its CloudHSM cluster, use the ConnectionState element in the response. If an attempt to connect the custom key store failed, the ConnectionState value is FAILED and the ConnectionErrorCode element in the response indicates the cause of the failure. For help interpreting the ConnectionErrorCode, see CustomKeyStoresListEntry. Custom key stores have a DISCONNECTED connection state if the key store has never been connected or you use the DisconnectCustomKeyStore operation to disconnect it. If your custom key store state is CONNECTED but you are having trouble using it, make sure that its associated CloudHSM cluster is active and contains the minimum number of HSMs required for the operation, if any.  For help repairing your custom key store, see the Troubleshooting Custom Key Stores topic in the Key Management Service Developer Guide.  Cross-account use: No. You cannot perform this operation on a custom key store in a different Amazon Web Services account.  Required permissions: kms:DescribeCustomKeyStores (IAM policy)  Related operations:     ConnectCustomKeyStore     CreateCustomKeyStore     DeleteCustomKeyStore     DisconnectCustomKeyStore     UpdateCustomKeyStore   
+   * Gets information about custom key stores in the account and Region. This operation is part of the custom key store feature feature in KMS, which combines the convenience and extensive integration of KMS with the isolation and control of a single-tenant key store. By default, this operation returns information about all custom key stores in the account and Region. To get only information about a particular custom key store, use either the CustomKeyStoreName or CustomKeyStoreId parameter (but not both). To determine whether the custom key store is connected to its CloudHSM cluster, use the ConnectionState element in the response. If an attempt to connect the custom key store failed, the ConnectionState value is FAILED and the ConnectionErrorCode element in the response indicates the cause of the failure. For help interpreting the ConnectionErrorCode, see CustomKeyStoresListEntry. Custom key stores have a DISCONNECTED connection state if the key store has never been connected or you use the DisconnectCustomKeyStore operation to disconnect it. If your custom key store state is CONNECTED but you are having trouble using it, make sure that its associated CloudHSM cluster is active and contains the minimum number of HSMs required for the operation, if any.  For help repairing your custom key store, see the Troubleshooting Custom Key Stores topic in the Key Management Service Developer Guide.  Cross-account use: No. You cannot perform this operation on a custom key store in a different Amazon Web Services account.  Required permissions: kms:DescribeCustomKeyStores (IAM policy)  Related operations:     ConnectCustomKeyStore     CreateCustomKeyStore     DeleteCustomKeyStore     DisconnectCustomKeyStore     UpdateCustomKeyStore   
    */
   describeCustomKeyStores(params: KMS.Types.DescribeCustomKeyStoresRequest, callback?: (err: AWSError, data: KMS.Types.DescribeCustomKeyStoresResponse) => void): Request<KMS.Types.DescribeCustomKeyStoresResponse, AWSError>;
   /**
-   * Gets information about custom key stores in the account and Region. This operation is part of the Custom Key Store feature feature in KMS, which combines the convenience and extensive integration of KMS with the isolation and control of a single-tenant key store. By default, this operation returns information about all custom key stores in the account and Region. To get only information about a particular custom key store, use either the CustomKeyStoreName or CustomKeyStoreId parameter (but not both). To determine whether the custom key store is connected to its CloudHSM cluster, use the ConnectionState element in the response. If an attempt to connect the custom key store failed, the ConnectionState value is FAILED and the ConnectionErrorCode element in the response indicates the cause of the failure. For help interpreting the ConnectionErrorCode, see CustomKeyStoresListEntry. Custom key stores have a DISCONNECTED connection state if the key store has never been connected or you use the DisconnectCustomKeyStore operation to disconnect it. If your custom key store state is CONNECTED but you are having trouble using it, make sure that its associated CloudHSM cluster is active and contains the minimum number of HSMs required for the operation, if any.  For help repairing your custom key store, see the Troubleshooting Custom Key Stores topic in the Key Management Service Developer Guide.  Cross-account use: No. You cannot perform this operation on a custom key store in a different Amazon Web Services account.  Required permissions: kms:DescribeCustomKeyStores (IAM policy)  Related operations:     ConnectCustomKeyStore     CreateCustomKeyStore     DeleteCustomKeyStore     DisconnectCustomKeyStore     UpdateCustomKeyStore   
+   * Gets information about custom key stores in the account and Region. This operation is part of the custom key store feature feature in KMS, which combines the convenience and extensive integration of KMS with the isolation and control of a single-tenant key store. By default, this operation returns information about all custom key stores in the account and Region. To get only information about a particular custom key store, use either the CustomKeyStoreName or CustomKeyStoreId parameter (but not both). To determine whether the custom key store is connected to its CloudHSM cluster, use the ConnectionState element in the response. If an attempt to connect the custom key store failed, the ConnectionState value is FAILED and the ConnectionErrorCode element in the response indicates the cause of the failure. For help interpreting the ConnectionErrorCode, see CustomKeyStoresListEntry. Custom key stores have a DISCONNECTED connection state if the key store has never been connected or you use the DisconnectCustomKeyStore operation to disconnect it. If your custom key store state is CONNECTED but you are having trouble using it, make sure that its associated CloudHSM cluster is active and contains the minimum number of HSMs required for the operation, if any.  For help repairing your custom key store, see the Troubleshooting Custom Key Stores topic in the Key Management Service Developer Guide.  Cross-account use: No. You cannot perform this operation on a custom key store in a different Amazon Web Services account.  Required permissions: kms:DescribeCustomKeyStores (IAM policy)  Related operations:     ConnectCustomKeyStore     CreateCustomKeyStore     DeleteCustomKeyStore     DisconnectCustomKeyStore     UpdateCustomKeyStore   
    */
   describeCustomKeyStores(callback?: (err: AWSError, data: KMS.Types.DescribeCustomKeyStoresResponse) => void): Request<KMS.Types.DescribeCustomKeyStoresResponse, AWSError>;
   /**
-   * Provides detailed information about a KMS key. You can run DescribeKey on a customer managed key or an Amazon Web Services managed key. This detailed information includes the key ARN, creation date (and deletion date, if applicable), the key state, and the origin and expiration date (if any) of the key material. It includes fields, like KeySpec, that help you distinguish different types of KMS keys. It also displays the key usage (encryption, signing, or generating and verifying MACs) and the algorithms that the KMS key supports. For KMS keys in custom key stores, it includes information about the custom key store, such as the key store ID and the CloudHSM cluster ID. For multi-Region keys, it displays the primary key and all related replica keys.   DescribeKey does not return the following information:   Aliases associated with the KMS key. To get this information, use ListAliases.   Whether automatic key rotation is enabled on the KMS key. To get this information, use GetKeyRotationStatus. Also, some key states prevent a KMS key from being automatically rotated. For details, see How Automatic Key Rotation Works in Key Management Service Developer Guide.   Tags on the KMS key. To get this information, use ListResourceTags.   Key policies and grants on the KMS key. To get this information, use GetKeyPolicy and ListGrants.   In general, DescribeKey is a non-mutating operation. It returns data about KMS keys, but doesn't change them. However, Amazon Web Services services use DescribeKey to create Amazon Web Services managed keys from a predefined Amazon Web Services alias with no key ID.  Cross-account use: Yes. To perform this operation with a KMS key in a different Amazon Web Services account, specify the key ARN or alias ARN in the value of the KeyId parameter.  Required permissions: kms:DescribeKey (key policy)  Related operations:     GetKeyPolicy     GetKeyRotationStatus     ListAliases     ListGrants     ListKeys     ListResourceTags     ListRetirableGrants   
+   * Provides detailed information about a KMS key. You can run DescribeKey on a customer managed key or an Amazon Web Services managed key. This detailed information includes the key ARN, creation date (and deletion date, if applicable), the key state, and the origin and expiration date (if any) of the key material. It includes fields, like KeySpec, that help you distinguish different types of KMS keys. It also displays the key usage (encryption, signing, or generating and verifying MACs) and the algorithms that the KMS key supports. For KMS keys in custom key stores, it includes information about the custom key store, such as the key store ID and the CloudHSM cluster ID. For multi-Region keys, it displays the primary key and all related replica keys.   DescribeKey does not return the following information:   Aliases associated with the KMS key. To get this information, use ListAliases.   Whether automatic key rotation is enabled on the KMS key. To get this information, use GetKeyRotationStatus. Also, some key states prevent a KMS key from being automatically rotated. For details, see How Automatic Key Rotation Works in the Key Management Service Developer Guide.   Tags on the KMS key. To get this information, use ListResourceTags.   Key policies and grants on the KMS key. To get this information, use GetKeyPolicy and ListGrants.   In general, DescribeKey is a non-mutating operation. It returns data about KMS keys, but doesn't change them. However, Amazon Web Services services use DescribeKey to create Amazon Web Services managed keys from a predefined Amazon Web Services alias with no key ID.  Cross-account use: Yes. To perform this operation with a KMS key in a different Amazon Web Services account, specify the key ARN or alias ARN in the value of the KeyId parameter.  Required permissions: kms:DescribeKey (key policy)  Related operations:     GetKeyPolicy     GetKeyRotationStatus     ListAliases     ListGrants     ListKeys     ListResourceTags     ListRetirableGrants   
    */
   describeKey(params: KMS.Types.DescribeKeyRequest, callback?: (err: AWSError, data: KMS.Types.DescribeKeyResponse) => void): Request<KMS.Types.DescribeKeyResponse, AWSError>;
   /**
-   * Provides detailed information about a KMS key. You can run DescribeKey on a customer managed key or an Amazon Web Services managed key. This detailed information includes the key ARN, creation date (and deletion date, if applicable), the key state, and the origin and expiration date (if any) of the key material. It includes fields, like KeySpec, that help you distinguish different types of KMS keys. It also displays the key usage (encryption, signing, or generating and verifying MACs) and the algorithms that the KMS key supports. For KMS keys in custom key stores, it includes information about the custom key store, such as the key store ID and the CloudHSM cluster ID. For multi-Region keys, it displays the primary key and all related replica keys.   DescribeKey does not return the following information:   Aliases associated with the KMS key. To get this information, use ListAliases.   Whether automatic key rotation is enabled on the KMS key. To get this information, use GetKeyRotationStatus. Also, some key states prevent a KMS key from being automatically rotated. For details, see How Automatic Key Rotation Works in Key Management Service Developer Guide.   Tags on the KMS key. To get this information, use ListResourceTags.   Key policies and grants on the KMS key. To get this information, use GetKeyPolicy and ListGrants.   In general, DescribeKey is a non-mutating operation. It returns data about KMS keys, but doesn't change them. However, Amazon Web Services services use DescribeKey to create Amazon Web Services managed keys from a predefined Amazon Web Services alias with no key ID.  Cross-account use: Yes. To perform this operation with a KMS key in a different Amazon Web Services account, specify the key ARN or alias ARN in the value of the KeyId parameter.  Required permissions: kms:DescribeKey (key policy)  Related operations:     GetKeyPolicy     GetKeyRotationStatus     ListAliases     ListGrants     ListKeys     ListResourceTags     ListRetirableGrants   
+   * Provides detailed information about a KMS key. You can run DescribeKey on a customer managed key or an Amazon Web Services managed key. This detailed information includes the key ARN, creation date (and deletion date, if applicable), the key state, and the origin and expiration date (if any) of the key material. It includes fields, like KeySpec, that help you distinguish different types of KMS keys. It also displays the key usage (encryption, signing, or generating and verifying MACs) and the algorithms that the KMS key supports. For KMS keys in custom key stores, it includes information about the custom key store, such as the key store ID and the CloudHSM cluster ID. For multi-Region keys, it displays the primary key and all related replica keys.   DescribeKey does not return the following information:   Aliases associated with the KMS key. To get this information, use ListAliases.   Whether automatic key rotation is enabled on the KMS key. To get this information, use GetKeyRotationStatus. Also, some key states prevent a KMS key from being automatically rotated. For details, see How Automatic Key Rotation Works in the Key Management Service Developer Guide.   Tags on the KMS key. To get this information, use ListResourceTags.   Key policies and grants on the KMS key. To get this information, use GetKeyPolicy and ListGrants.   In general, DescribeKey is a non-mutating operation. It returns data about KMS keys, but doesn't change them. However, Amazon Web Services services use DescribeKey to create Amazon Web Services managed keys from a predefined Amazon Web Services alias with no key ID.  Cross-account use: Yes. To perform this operation with a KMS key in a different Amazon Web Services account, specify the key ARN or alias ARN in the value of the KeyId parameter.  Required permissions: kms:DescribeKey (key policy)  Related operations:     GetKeyPolicy     GetKeyRotationStatus     ListAliases     ListGrants     ListKeys     ListResourceTags     ListRetirableGrants   
    */
   describeKey(callback?: (err: AWSError, data: KMS.Types.DescribeKeyResponse) => void): Request<KMS.Types.DescribeKeyResponse, AWSError>;
   /**
@@ -124,11 +124,11 @@ declare class KMS extends Service {
    */
   disableKeyRotation(callback?: (err: AWSError, data: {}) => void): Request<{}, AWSError>;
   /**
-   * Disconnects the custom key store from its associated CloudHSM cluster. While a custom key store is disconnected, you can manage the custom key store and its KMS keys, but you cannot create or use KMS keys in the custom key store. You can reconnect the custom key store at any time.  While a custom key store is disconnected, all attempts to create KMS keys in the custom key store or to use existing KMS keys in cryptographic operations will fail. This action can prevent users from storing and accessing sensitive data.   To find the connection state of a custom key store, use the DescribeCustomKeyStores operation. To reconnect a custom key store, use the ConnectCustomKeyStore operation. If the operation succeeds, it returns a JSON object with no properties. This operation is part of the Custom Key Store feature feature in KMS, which combines the convenience and extensive integration of KMS with the isolation and control of a single-tenant key store.  Cross-account use: No. You cannot perform this operation on a custom key store in a different Amazon Web Services account.  Required permissions: kms:DisconnectCustomKeyStore (IAM policy)  Related operations:     ConnectCustomKeyStore     CreateCustomKeyStore     DeleteCustomKeyStore     DescribeCustomKeyStores     UpdateCustomKeyStore   
+   * Disconnects the custom key store from its associated CloudHSM cluster. While a custom key store is disconnected, you can manage the custom key store and its KMS keys, but you cannot create or use KMS keys in the custom key store. You can reconnect the custom key store at any time.  While a custom key store is disconnected, all attempts to create KMS keys in the custom key store or to use existing KMS keys in cryptographic operations will fail. This action can prevent users from storing and accessing sensitive data.   To find the connection state of a custom key store, use the DescribeCustomKeyStores operation. To reconnect a custom key store, use the ConnectCustomKeyStore operation. If the operation succeeds, it returns a JSON object with no properties. This operation is part of the custom key store feature feature in KMS, which combines the convenience and extensive integration of KMS with the isolation and control of a single-tenant key store.  Cross-account use: No. You cannot perform this operation on a custom key store in a different Amazon Web Services account.  Required permissions: kms:DisconnectCustomKeyStore (IAM policy)  Related operations:     ConnectCustomKeyStore     CreateCustomKeyStore     DeleteCustomKeyStore     DescribeCustomKeyStores     UpdateCustomKeyStore   
    */
   disconnectCustomKeyStore(params: KMS.Types.DisconnectCustomKeyStoreRequest, callback?: (err: AWSError, data: KMS.Types.DisconnectCustomKeyStoreResponse) => void): Request<KMS.Types.DisconnectCustomKeyStoreResponse, AWSError>;
   /**
-   * Disconnects the custom key store from its associated CloudHSM cluster. While a custom key store is disconnected, you can manage the custom key store and its KMS keys, but you cannot create or use KMS keys in the custom key store. You can reconnect the custom key store at any time.  While a custom key store is disconnected, all attempts to create KMS keys in the custom key store or to use existing KMS keys in cryptographic operations will fail. This action can prevent users from storing and accessing sensitive data.   To find the connection state of a custom key store, use the DescribeCustomKeyStores operation. To reconnect a custom key store, use the ConnectCustomKeyStore operation. If the operation succeeds, it returns a JSON object with no properties. This operation is part of the Custom Key Store feature feature in KMS, which combines the convenience and extensive integration of KMS with the isolation and control of a single-tenant key store.  Cross-account use: No. You cannot perform this operation on a custom key store in a different Amazon Web Services account.  Required permissions: kms:DisconnectCustomKeyStore (IAM policy)  Related operations:     ConnectCustomKeyStore     CreateCustomKeyStore     DeleteCustomKeyStore     DescribeCustomKeyStores     UpdateCustomKeyStore   
+   * Disconnects the custom key store from its associated CloudHSM cluster. While a custom key store is disconnected, you can manage the custom key store and its KMS keys, but you cannot create or use KMS keys in the custom key store. You can reconnect the custom key store at any time.  While a custom key store is disconnected, all attempts to create KMS keys in the custom key store or to use existing KMS keys in cryptographic operations will fail. This action can prevent users from storing and accessing sensitive data.   To find the connection state of a custom key store, use the DescribeCustomKeyStores operation. To reconnect a custom key store, use the ConnectCustomKeyStore operation. If the operation succeeds, it returns a JSON object with no properties. This operation is part of the custom key store feature feature in KMS, which combines the convenience and extensive integration of KMS with the isolation and control of a single-tenant key store.  Cross-account use: No. You cannot perform this operation on a custom key store in a different Amazon Web Services account.  Required permissions: kms:DisconnectCustomKeyStore (IAM policy)  Related operations:     ConnectCustomKeyStore     CreateCustomKeyStore     DeleteCustomKeyStore     DescribeCustomKeyStores     UpdateCustomKeyStore   
    */
   disconnectCustomKeyStore(callback?: (err: AWSError, data: KMS.Types.DisconnectCustomKeyStoreResponse) => void): Request<KMS.Types.DisconnectCustomKeyStoreResponse, AWSError>;
   /**
@@ -148,35 +148,35 @@ declare class KMS extends Service {
    */
   enableKeyRotation(callback?: (err: AWSError, data: {}) => void): Request<{}, AWSError>;
   /**
-   * Encrypts plaintext of up to 4,096 bytes using a KMS key. You can use a symmetric or asymmetric KMS key with a KeyUsage of ENCRYPT_DECRYPT. You can use this operation to encrypt small amounts of arbitrary data, such as a personal identifier or database password, or other sensitive information. You don't need to use the Encrypt operation to encrypt a data key. The GenerateDataKey and GenerateDataKeyPair operations return a plaintext data key and an encrypted copy of that data key. If you use a symmetric encryption KMS key, you can use an encryption context to add additional security to your encryption operation. If you specify an EncryptionContext when encrypting data, you must specify the same encryption context (a case-sensitive exact match) when decrypting the data. Otherwise, the request to decrypt fails with an InvalidCiphertextException. For more information, see Encryption Context in the Key Management Service Developer Guide. If you specify an asymmetric KMS key, you must also specify the encryption algorithm. The algorithm must be compatible with the KMS key type.  When you use an asymmetric KMS key to encrypt or reencrypt data, be sure to record the KMS key and encryption algorithm that you choose. You will be required to provide the same KMS key and encryption algorithm when you decrypt the data. If the KMS key and algorithm do not match the values used to encrypt the data, the decrypt operation fails. You are not required to supply the key ID and encryption algorithm when you decrypt with symmetric encryption KMS keys because KMS stores this information in the ciphertext blob. KMS cannot store metadata in ciphertext generated with asymmetric keys. The standard format for asymmetric key ciphertext does not include configurable fields.  The maximum size of the data that you can encrypt varies with the type of KMS key and the encryption algorithm that you choose.   Symmetric encryption KMS keys    SYMMETRIC_DEFAULT: 4096 bytes      RSA_2048     RSAES_OAEP_SHA_1: 214 bytes    RSAES_OAEP_SHA_256: 190 bytes      RSA_3072     RSAES_OAEP_SHA_1: 342 bytes    RSAES_OAEP_SHA_256: 318 bytes      RSA_4096     RSAES_OAEP_SHA_1: 470 bytes    RSAES_OAEP_SHA_256: 446 bytes     The KMS key that you use for this operation must be in a compatible key state. For details, see Key states of KMS keys in the Key Management Service Developer Guide.  Cross-account use: Yes. To perform this operation with a KMS key in a different Amazon Web Services account, specify the key ARN or alias ARN in the value of the KeyId parameter.  Required permissions: kms:Encrypt (key policy)  Related operations:     Decrypt     GenerateDataKey     GenerateDataKeyPair   
+   * Encrypts plaintext of up to 4,096 bytes using a KMS key. You can use a symmetric or asymmetric KMS key with a KeyUsage of ENCRYPT_DECRYPT. You can use this operation to encrypt small amounts of arbitrary data, such as a personal identifier or database password, or other sensitive information. You don't need to use the Encrypt operation to encrypt a data key. The GenerateDataKey and GenerateDataKeyPair operations return a plaintext data key and an encrypted copy of that data key. If you use a symmetric encryption KMS key, you can use an encryption context to add additional security to your encryption operation. If you specify an EncryptionContext when encrypting data, you must specify the same encryption context (a case-sensitive exact match) when decrypting the data. Otherwise, the request to decrypt fails with an InvalidCiphertextException. For more information, see Encryption Context in the Key Management Service Developer Guide. If you specify an asymmetric KMS key, you must also specify the encryption algorithm. The algorithm must be compatible with the KMS key spec.  When you use an asymmetric KMS key to encrypt or reencrypt data, be sure to record the KMS key and encryption algorithm that you choose. You will be required to provide the same KMS key and encryption algorithm when you decrypt the data. If the KMS key and algorithm do not match the values used to encrypt the data, the decrypt operation fails. You are not required to supply the key ID and encryption algorithm when you decrypt with symmetric encryption KMS keys because KMS stores this information in the ciphertext blob. KMS cannot store metadata in ciphertext generated with asymmetric keys. The standard format for asymmetric key ciphertext does not include configurable fields.  The maximum size of the data that you can encrypt varies with the type of KMS key and the encryption algorithm that you choose.   Symmetric encryption KMS keys    SYMMETRIC_DEFAULT: 4096 bytes      RSA_2048     RSAES_OAEP_SHA_1: 214 bytes    RSAES_OAEP_SHA_256: 190 bytes      RSA_3072     RSAES_OAEP_SHA_1: 342 bytes    RSAES_OAEP_SHA_256: 318 bytes      RSA_4096     RSAES_OAEP_SHA_1: 470 bytes    RSAES_OAEP_SHA_256: 446 bytes      SM2PKE: 1024 bytes (China Regions only)   The KMS key that you use for this operation must be in a compatible key state. For details, see Key states of KMS keys in the Key Management Service Developer Guide.  Cross-account use: Yes. To perform this operation with a KMS key in a different Amazon Web Services account, specify the key ARN or alias ARN in the value of the KeyId parameter.  Required permissions: kms:Encrypt (key policy)  Related operations:     Decrypt     GenerateDataKey     GenerateDataKeyPair   
    */
   encrypt(params: KMS.Types.EncryptRequest, callback?: (err: AWSError, data: KMS.Types.EncryptResponse) => void): Request<KMS.Types.EncryptResponse, AWSError>;
   /**
-   * Encrypts plaintext of up to 4,096 bytes using a KMS key. You can use a symmetric or asymmetric KMS key with a KeyUsage of ENCRYPT_DECRYPT. You can use this operation to encrypt small amounts of arbitrary data, such as a personal identifier or database password, or other sensitive information. You don't need to use the Encrypt operation to encrypt a data key. The GenerateDataKey and GenerateDataKeyPair operations return a plaintext data key and an encrypted copy of that data key. If you use a symmetric encryption KMS key, you can use an encryption context to add additional security to your encryption operation. If you specify an EncryptionContext when encrypting data, you must specify the same encryption context (a case-sensitive exact match) when decrypting the data. Otherwise, the request to decrypt fails with an InvalidCiphertextException. For more information, see Encryption Context in the Key Management Service Developer Guide. If you specify an asymmetric KMS key, you must also specify the encryption algorithm. The algorithm must be compatible with the KMS key type.  When you use an asymmetric KMS key to encrypt or reencrypt data, be sure to record the KMS key and encryption algorithm that you choose. You will be required to provide the same KMS key and encryption algorithm when you decrypt the data. If the KMS key and algorithm do not match the values used to encrypt the data, the decrypt operation fails. You are not required to supply the key ID and encryption algorithm when you decrypt with symmetric encryption KMS keys because KMS stores this information in the ciphertext blob. KMS cannot store metadata in ciphertext generated with asymmetric keys. The standard format for asymmetric key ciphertext does not include configurable fields.  The maximum size of the data that you can encrypt varies with the type of KMS key and the encryption algorithm that you choose.   Symmetric encryption KMS keys    SYMMETRIC_DEFAULT: 4096 bytes      RSA_2048     RSAES_OAEP_SHA_1: 214 bytes    RSAES_OAEP_SHA_256: 190 bytes      RSA_3072     RSAES_OAEP_SHA_1: 342 bytes    RSAES_OAEP_SHA_256: 318 bytes      RSA_4096     RSAES_OAEP_SHA_1: 470 bytes    RSAES_OAEP_SHA_256: 446 bytes     The KMS key that you use for this operation must be in a compatible key state. For details, see Key states of KMS keys in the Key Management Service Developer Guide.  Cross-account use: Yes. To perform this operation with a KMS key in a different Amazon Web Services account, specify the key ARN or alias ARN in the value of the KeyId parameter.  Required permissions: kms:Encrypt (key policy)  Related operations:     Decrypt     GenerateDataKey     GenerateDataKeyPair   
+   * Encrypts plaintext of up to 4,096 bytes using a KMS key. You can use a symmetric or asymmetric KMS key with a KeyUsage of ENCRYPT_DECRYPT. You can use this operation to encrypt small amounts of arbitrary data, such as a personal identifier or database password, or other sensitive information. You don't need to use the Encrypt operation to encrypt a data key. The GenerateDataKey and GenerateDataKeyPair operations return a plaintext data key and an encrypted copy of that data key. If you use a symmetric encryption KMS key, you can use an encryption context to add additional security to your encryption operation. If you specify an EncryptionContext when encrypting data, you must specify the same encryption context (a case-sensitive exact match) when decrypting the data. Otherwise, the request to decrypt fails with an InvalidCiphertextException. For more information, see Encryption Context in the Key Management Service Developer Guide. If you specify an asymmetric KMS key, you must also specify the encryption algorithm. The algorithm must be compatible with the KMS key spec.  When you use an asymmetric KMS key to encrypt or reencrypt data, be sure to record the KMS key and encryption algorithm that you choose. You will be required to provide the same KMS key and encryption algorithm when you decrypt the data. If the KMS key and algorithm do not match the values used to encrypt the data, the decrypt operation fails. You are not required to supply the key ID and encryption algorithm when you decrypt with symmetric encryption KMS keys because KMS stores this information in the ciphertext blob. KMS cannot store metadata in ciphertext generated with asymmetric keys. The standard format for asymmetric key ciphertext does not include configurable fields.  The maximum size of the data that you can encrypt varies with the type of KMS key and the encryption algorithm that you choose.   Symmetric encryption KMS keys    SYMMETRIC_DEFAULT: 4096 bytes      RSA_2048     RSAES_OAEP_SHA_1: 214 bytes    RSAES_OAEP_SHA_256: 190 bytes      RSA_3072     RSAES_OAEP_SHA_1: 342 bytes    RSAES_OAEP_SHA_256: 318 bytes      RSA_4096     RSAES_OAEP_SHA_1: 470 bytes    RSAES_OAEP_SHA_256: 446 bytes      SM2PKE: 1024 bytes (China Regions only)   The KMS key that you use for this operation must be in a compatible key state. For details, see Key states of KMS keys in the Key Management Service Developer Guide.  Cross-account use: Yes. To perform this operation with a KMS key in a different Amazon Web Services account, specify the key ARN or alias ARN in the value of the KeyId parameter.  Required permissions: kms:Encrypt (key policy)  Related operations:     Decrypt     GenerateDataKey     GenerateDataKeyPair   
    */
   encrypt(callback?: (err: AWSError, data: KMS.Types.EncryptResponse) => void): Request<KMS.Types.EncryptResponse, AWSError>;
   /**
-   * Returns a unique symmetric data key for use outside of KMS. This operation returns a plaintext copy of the data key and a copy that is encrypted under a symmetric encryption KMS key that you specify. The bytes in the plaintext key are random; they are not related to the caller or the KMS key. You can use the plaintext key to encrypt your data outside of KMS and store the encrypted data key with the encrypted data. To generate a data key, specify the symmetric encryption KMS key that will be used to encrypt the data key. You cannot use an asymmetric KMS key to encrypt data keys. To get the type of your KMS key, use the DescribeKey operation. You must also specify the length of the data key. Use either the KeySpec or NumberOfBytes parameters (but not both). For 128-bit and 256-bit data keys, use the KeySpec parameter.  To get only an encrypted copy of the data key, use GenerateDataKeyWithoutPlaintext. To generate an asymmetric data key pair, use the GenerateDataKeyPair or GenerateDataKeyPairWithoutPlaintext operation. To get a cryptographically secure random byte string, use GenerateRandom. You can use an optional encryption context to add additional security to the encryption operation. If you specify an EncryptionContext, you must specify the same encryption context (a case-sensitive exact match) when decrypting the encrypted data key. Otherwise, the request to decrypt fails with an InvalidCiphertextException. For more information, see Encryption Context in the Key Management Service Developer Guide. Applications in Amazon Web Services Nitro Enclaves can call this operation by using the Amazon Web Services Nitro Enclaves Development Kit. For information about the supporting parameters, see How Amazon Web Services Nitro Enclaves use KMS in the Key Management Service Developer Guide. The KMS key that you use for this operation must be in a compatible key state. For details, see Key states of KMS keys in the Key Management Service Developer Guide.  How to use your data key  We recommend that you use the following pattern to encrypt data locally in your application. You can write your own code or use a client-side encryption library, such as the Amazon Web Services Encryption SDK, the Amazon DynamoDB Encryption Client, or Amazon S3 client-side encryption to do these tasks for you. To encrypt data outside of KMS:   Use the GenerateDataKey operation to get a data key.   Use the plaintext data key (in the Plaintext field of the response) to encrypt your data outside of KMS. Then erase the plaintext data key from memory.   Store the encrypted data key (in the CiphertextBlob field of the response) with the encrypted data.   To decrypt data outside of KMS:   Use the Decrypt operation to decrypt the encrypted data key. The operation returns a plaintext copy of the data key.   Use the plaintext data key to decrypt data outside of KMS, then erase the plaintext data key from memory.    Cross-account use: Yes. To perform this operation with a KMS key in a different Amazon Web Services account, specify the key ARN or alias ARN in the value of the KeyId parameter.  Required permissions: kms:GenerateDataKey (key policy)  Related operations:     Decrypt     Encrypt     GenerateDataKeyPair     GenerateDataKeyPairWithoutPlaintext     GenerateDataKeyWithoutPlaintext   
+   * Returns a unique symmetric data key for use outside of KMS. This operation returns a plaintext copy of the data key and a copy that is encrypted under a symmetric encryption KMS key that you specify. The bytes in the plaintext key are random; they are not related to the caller or the KMS key. You can use the plaintext key to encrypt your data outside of KMS and store the encrypted data key with the encrypted data. To generate a data key, specify the symmetric encryption KMS key that will be used to encrypt the data key. You cannot use an asymmetric KMS key to encrypt data keys. To get the type of your KMS key, use the DescribeKey operation. You must also specify the length of the data key. Use either the KeySpec or NumberOfBytes parameters (but not both). For 128-bit and 256-bit data keys, use the KeySpec parameter. To generate an SM4 data key (China Regions only), specify a KeySpec value of AES_128 or NumberOfBytes value of 128. The symmetric encryption key used in China Regions to encrypt your data key is an SM4 encryption key. To get only an encrypted copy of the data key, use GenerateDataKeyWithoutPlaintext. To generate an asymmetric data key pair, use the GenerateDataKeyPair or GenerateDataKeyPairWithoutPlaintext operation. To get a cryptographically secure random byte string, use GenerateRandom. You can use an optional encryption context to add additional security to the encryption operation. If you specify an EncryptionContext, you must specify the same encryption context (a case-sensitive exact match) when decrypting the encrypted data key. Otherwise, the request to decrypt fails with an InvalidCiphertextException. For more information, see Encryption Context in the Key Management Service Developer Guide. Applications in Amazon Web Services Nitro Enclaves can call this operation by using the Amazon Web Services Nitro Enclaves Development Kit. For information about the supporting parameters, see How Amazon Web Services Nitro Enclaves use KMS in the Key Management Service Developer Guide. The KMS key that you use for this operation must be in a compatible key state. For details, see Key states of KMS keys in the Key Management Service Developer Guide.  How to use your data key  We recommend that you use the following pattern to encrypt data locally in your application. You can write your own code or use a client-side encryption library, such as the Amazon Web Services Encryption SDK, the Amazon DynamoDB Encryption Client, or Amazon S3 client-side encryption to do these tasks for you. To encrypt data outside of KMS:   Use the GenerateDataKey operation to get a data key.   Use the plaintext data key (in the Plaintext field of the response) to encrypt your data outside of KMS. Then erase the plaintext data key from memory.   Store the encrypted data key (in the CiphertextBlob field of the response) with the encrypted data.   To decrypt data outside of KMS:   Use the Decrypt operation to decrypt the encrypted data key. The operation returns a plaintext copy of the data key.   Use the plaintext data key to decrypt data outside of KMS, then erase the plaintext data key from memory.    Cross-account use: Yes. To perform this operation with a KMS key in a different Amazon Web Services account, specify the key ARN or alias ARN in the value of the KeyId parameter.  Required permissions: kms:GenerateDataKey (key policy)  Related operations:     Decrypt     Encrypt     GenerateDataKeyPair     GenerateDataKeyPairWithoutPlaintext     GenerateDataKeyWithoutPlaintext   
    */
   generateDataKey(params: KMS.Types.GenerateDataKeyRequest, callback?: (err: AWSError, data: KMS.Types.GenerateDataKeyResponse) => void): Request<KMS.Types.GenerateDataKeyResponse, AWSError>;
   /**
-   * Returns a unique symmetric data key for use outside of KMS. This operation returns a plaintext copy of the data key and a copy that is encrypted under a symmetric encryption KMS key that you specify. The bytes in the plaintext key are random; they are not related to the caller or the KMS key. You can use the plaintext key to encrypt your data outside of KMS and store the encrypted data key with the encrypted data. To generate a data key, specify the symmetric encryption KMS key that will be used to encrypt the data key. You cannot use an asymmetric KMS key to encrypt data keys. To get the type of your KMS key, use the DescribeKey operation. You must also specify the length of the data key. Use either the KeySpec or NumberOfBytes parameters (but not both). For 128-bit and 256-bit data keys, use the KeySpec parameter.  To get only an encrypted copy of the data key, use GenerateDataKeyWithoutPlaintext. To generate an asymmetric data key pair, use the GenerateDataKeyPair or GenerateDataKeyPairWithoutPlaintext operation. To get a cryptographically secure random byte string, use GenerateRandom. You can use an optional encryption context to add additional security to the encryption operation. If you specify an EncryptionContext, you must specify the same encryption context (a case-sensitive exact match) when decrypting the encrypted data key. Otherwise, the request to decrypt fails with an InvalidCiphertextException. For more information, see Encryption Context in the Key Management Service Developer Guide. Applications in Amazon Web Services Nitro Enclaves can call this operation by using the Amazon Web Services Nitro Enclaves Development Kit. For information about the supporting parameters, see How Amazon Web Services Nitro Enclaves use KMS in the Key Management Service Developer Guide. The KMS key that you use for this operation must be in a compatible key state. For details, see Key states of KMS keys in the Key Management Service Developer Guide.  How to use your data key  We recommend that you use the following pattern to encrypt data locally in your application. You can write your own code or use a client-side encryption library, such as the Amazon Web Services Encryption SDK, the Amazon DynamoDB Encryption Client, or Amazon S3 client-side encryption to do these tasks for you. To encrypt data outside of KMS:   Use the GenerateDataKey operation to get a data key.   Use the plaintext data key (in the Plaintext field of the response) to encrypt your data outside of KMS. Then erase the plaintext data key from memory.   Store the encrypted data key (in the CiphertextBlob field of the response) with the encrypted data.   To decrypt data outside of KMS:   Use the Decrypt operation to decrypt the encrypted data key. The operation returns a plaintext copy of the data key.   Use the plaintext data key to decrypt data outside of KMS, then erase the plaintext data key from memory.    Cross-account use: Yes. To perform this operation with a KMS key in a different Amazon Web Services account, specify the key ARN or alias ARN in the value of the KeyId parameter.  Required permissions: kms:GenerateDataKey (key policy)  Related operations:     Decrypt     Encrypt     GenerateDataKeyPair     GenerateDataKeyPairWithoutPlaintext     GenerateDataKeyWithoutPlaintext   
+   * Returns a unique symmetric data key for use outside of KMS. This operation returns a plaintext copy of the data key and a copy that is encrypted under a symmetric encryption KMS key that you specify. The bytes in the plaintext key are random; they are not related to the caller or the KMS key. You can use the plaintext key to encrypt your data outside of KMS and store the encrypted data key with the encrypted data. To generate a data key, specify the symmetric encryption KMS key that will be used to encrypt the data key. You cannot use an asymmetric KMS key to encrypt data keys. To get the type of your KMS key, use the DescribeKey operation. You must also specify the length of the data key. Use either the KeySpec or NumberOfBytes parameters (but not both). For 128-bit and 256-bit data keys, use the KeySpec parameter. To generate an SM4 data key (China Regions only), specify a KeySpec value of AES_128 or NumberOfBytes value of 128. The symmetric encryption key used in China Regions to encrypt your data key is an SM4 encryption key. To get only an encrypted copy of the data key, use GenerateDataKeyWithoutPlaintext. To generate an asymmetric data key pair, use the GenerateDataKeyPair or GenerateDataKeyPairWithoutPlaintext operation. To get a cryptographically secure random byte string, use GenerateRandom. You can use an optional encryption context to add additional security to the encryption operation. If you specify an EncryptionContext, you must specify the same encryption context (a case-sensitive exact match) when decrypting the encrypted data key. Otherwise, the request to decrypt fails with an InvalidCiphertextException. For more information, see Encryption Context in the Key Management Service Developer Guide. Applications in Amazon Web Services Nitro Enclaves can call this operation by using the Amazon Web Services Nitro Enclaves Development Kit. For information about the supporting parameters, see How Amazon Web Services Nitro Enclaves use KMS in the Key Management Service Developer Guide. The KMS key that you use for this operation must be in a compatible key state. For details, see Key states of KMS keys in the Key Management Service Developer Guide.  How to use your data key  We recommend that you use the following pattern to encrypt data locally in your application. You can write your own code or use a client-side encryption library, such as the Amazon Web Services Encryption SDK, the Amazon DynamoDB Encryption Client, or Amazon S3 client-side encryption to do these tasks for you. To encrypt data outside of KMS:   Use the GenerateDataKey operation to get a data key.   Use the plaintext data key (in the Plaintext field of the response) to encrypt your data outside of KMS. Then erase the plaintext data key from memory.   Store the encrypted data key (in the CiphertextBlob field of the response) with the encrypted data.   To decrypt data outside of KMS:   Use the Decrypt operation to decrypt the encrypted data key. The operation returns a plaintext copy of the data key.   Use the plaintext data key to decrypt data outside of KMS, then erase the plaintext data key from memory.    Cross-account use: Yes. To perform this operation with a KMS key in a different Amazon Web Services account, specify the key ARN or alias ARN in the value of the KeyId parameter.  Required permissions: kms:GenerateDataKey (key policy)  Related operations:     Decrypt     Encrypt     GenerateDataKeyPair     GenerateDataKeyPairWithoutPlaintext     GenerateDataKeyWithoutPlaintext   
    */
   generateDataKey(callback?: (err: AWSError, data: KMS.Types.GenerateDataKeyResponse) => void): Request<KMS.Types.GenerateDataKeyResponse, AWSError>;
   /**
-   * Returns a unique asymmetric data key pair for use outside of KMS. This operation returns a plaintext public key, a plaintext private key, and a copy of the private key that is encrypted under the symmetric encryption KMS key you specify. You can use the data key pair to perform asymmetric cryptography and implement digital signatures outside of KMS. The bytes in the keys are random; they not related to the caller or to the KMS key that is used to encrypt the private key.  You can use the public key that GenerateDataKeyPair returns to encrypt data or verify a signature outside of KMS. Then, store the encrypted private key with the data. When you are ready to decrypt data or sign a message, you can use the Decrypt operation to decrypt the encrypted private key. To generate a data key pair, you must specify a symmetric encryption KMS key to encrypt the private key in a data key pair. You cannot use an asymmetric KMS key or a KMS key in a custom key store. To get the type and origin of your KMS key, use the DescribeKey operation.  Use the KeyPairSpec parameter to choose an RSA or Elliptic Curve (ECC) data key pair. KMS recommends that your use ECC key pairs for signing, and use RSA key pairs for either encryption or signing, but not both. However, KMS cannot enforce any restrictions on the use of data key pairs outside of KMS. If you are using the data key pair to encrypt data, or for any operation where you don't immediately need a private key, consider using the GenerateDataKeyPairWithoutPlaintext operation. GenerateDataKeyPairWithoutPlaintext returns a plaintext public key and an encrypted private key, but omits the plaintext private key that you need only to decrypt ciphertext or sign a message. Later, when you need to decrypt the data or sign a message, use the Decrypt operation to decrypt the encrypted private key in the data key pair.  GenerateDataKeyPair returns a unique data key pair for each request. The bytes in the keys are random; they are not related to the caller or the KMS key that is used to encrypt the private key. The public key is a DER-encoded X.509 SubjectPublicKeyInfo, as specified in RFC 5280. The private key is a DER-encoded PKCS8 PrivateKeyInfo, as specified in RFC 5958. You can use an optional encryption context to add additional security to the encryption operation. If you specify an EncryptionContext, you must specify the same encryption context (a case-sensitive exact match) when decrypting the encrypted data key. Otherwise, the request to decrypt fails with an InvalidCiphertextException. For more information, see Encryption Context in the Key Management Service Developer Guide. The KMS key that you use for this operation must be in a compatible key state. For details, see Key states of KMS keys in the Key Management Service Developer Guide.  Cross-account use: Yes. To perform this operation with a KMS key in a different Amazon Web Services account, specify the key ARN or alias ARN in the value of the KeyId parameter.  Required permissions: kms:GenerateDataKeyPair (key policy)  Related operations:     Decrypt     Encrypt     GenerateDataKey     GenerateDataKeyPairWithoutPlaintext     GenerateDataKeyWithoutPlaintext   
+   * Returns a unique asymmetric data key pair for use outside of KMS. This operation returns a plaintext public key, a plaintext private key, and a copy of the private key that is encrypted under the symmetric encryption KMS key you specify. You can use the data key pair to perform asymmetric cryptography and implement digital signatures outside of KMS. The bytes in the keys are random; they not related to the caller or to the KMS key that is used to encrypt the private key.  You can use the public key that GenerateDataKeyPair returns to encrypt data or verify a signature outside of KMS. Then, store the encrypted private key with the data. When you are ready to decrypt data or sign a message, you can use the Decrypt operation to decrypt the encrypted private key. To generate a data key pair, you must specify a symmetric encryption KMS key to encrypt the private key in a data key pair. You cannot use an asymmetric KMS key or a KMS key in a custom key store. To get the type and origin of your KMS key, use the DescribeKey operation.  Use the KeyPairSpec parameter to choose an RSA or Elliptic Curve (ECC) data key pair. In China Regions, you can also choose an SM2 data key pair. KMS recommends that you use ECC key pairs for signing, and use RSA and SM2 key pairs for either encryption or signing, but not both. However, KMS cannot enforce any restrictions on the use of data key pairs outside of KMS. If you are using the data key pair to encrypt data, or for any operation where you don't immediately need a private key, consider using the GenerateDataKeyPairWithoutPlaintext operation. GenerateDataKeyPairWithoutPlaintext returns a plaintext public key and an encrypted private key, but omits the plaintext private key that you need only to decrypt ciphertext or sign a message. Later, when you need to decrypt the data or sign a message, use the Decrypt operation to decrypt the encrypted private key in the data key pair.  GenerateDataKeyPair returns a unique data key pair for each request. The bytes in the keys are random; they are not related to the caller or the KMS key that is used to encrypt the private key. The public key is a DER-encoded X.509 SubjectPublicKeyInfo, as specified in RFC 5280. The private key is a DER-encoded PKCS8 PrivateKeyInfo, as specified in RFC 5958. You can use an optional encryption context to add additional security to the encryption operation. If you specify an EncryptionContext, you must specify the same encryption context (a case-sensitive exact match) when decrypting the encrypted data key. Otherwise, the request to decrypt fails with an InvalidCiphertextException. For more information, see Encryption Context in the Key Management Service Developer Guide. The KMS key that you use for this operation must be in a compatible key state. For details, see Key states of KMS keys in the Key Management Service Developer Guide.  Cross-account use: Yes. To perform this operation with a KMS key in a different Amazon Web Services account, specify the key ARN or alias ARN in the value of the KeyId parameter.  Required permissions: kms:GenerateDataKeyPair (key policy)  Related operations:     Decrypt     Encrypt     GenerateDataKey     GenerateDataKeyPairWithoutPlaintext     GenerateDataKeyWithoutPlaintext   
    */
   generateDataKeyPair(params: KMS.Types.GenerateDataKeyPairRequest, callback?: (err: AWSError, data: KMS.Types.GenerateDataKeyPairResponse) => void): Request<KMS.Types.GenerateDataKeyPairResponse, AWSError>;
   /**
-   * Returns a unique asymmetric data key pair for use outside of KMS. This operation returns a plaintext public key, a plaintext private key, and a copy of the private key that is encrypted under the symmetric encryption KMS key you specify. You can use the data key pair to perform asymmetric cryptography and implement digital signatures outside of KMS. The bytes in the keys are random; they not related to the caller or to the KMS key that is used to encrypt the private key.  You can use the public key that GenerateDataKeyPair returns to encrypt data or verify a signature outside of KMS. Then, store the encrypted private key with the data. When you are ready to decrypt data or sign a message, you can use the Decrypt operation to decrypt the encrypted private key. To generate a data key pair, you must specify a symmetric encryption KMS key to encrypt the private key in a data key pair. You cannot use an asymmetric KMS key or a KMS key in a custom key store. To get the type and origin of your KMS key, use the DescribeKey operation.  Use the KeyPairSpec parameter to choose an RSA or Elliptic Curve (ECC) data key pair. KMS recommends that your use ECC key pairs for signing, and use RSA key pairs for either encryption or signing, but not both. However, KMS cannot enforce any restrictions on the use of data key pairs outside of KMS. If you are using the data key pair to encrypt data, or for any operation where you don't immediately need a private key, consider using the GenerateDataKeyPairWithoutPlaintext operation. GenerateDataKeyPairWithoutPlaintext returns a plaintext public key and an encrypted private key, but omits the plaintext private key that you need only to decrypt ciphertext or sign a message. Later, when you need to decrypt the data or sign a message, use the Decrypt operation to decrypt the encrypted private key in the data key pair.  GenerateDataKeyPair returns a unique data key pair for each request. The bytes in the keys are random; they are not related to the caller or the KMS key that is used to encrypt the private key. The public key is a DER-encoded X.509 SubjectPublicKeyInfo, as specified in RFC 5280. The private key is a DER-encoded PKCS8 PrivateKeyInfo, as specified in RFC 5958. You can use an optional encryption context to add additional security to the encryption operation. If you specify an EncryptionContext, you must specify the same encryption context (a case-sensitive exact match) when decrypting the encrypted data key. Otherwise, the request to decrypt fails with an InvalidCiphertextException. For more information, see Encryption Context in the Key Management Service Developer Guide. The KMS key that you use for this operation must be in a compatible key state. For details, see Key states of KMS keys in the Key Management Service Developer Guide.  Cross-account use: Yes. To perform this operation with a KMS key in a different Amazon Web Services account, specify the key ARN or alias ARN in the value of the KeyId parameter.  Required permissions: kms:GenerateDataKeyPair (key policy)  Related operations:     Decrypt     Encrypt     GenerateDataKey     GenerateDataKeyPairWithoutPlaintext     GenerateDataKeyWithoutPlaintext   
+   * Returns a unique asymmetric data key pair for use outside of KMS. This operation returns a plaintext public key, a plaintext private key, and a copy of the private key that is encrypted under the symmetric encryption KMS key you specify. You can use the data key pair to perform asymmetric cryptography and implement digital signatures outside of KMS. The bytes in the keys are random; they not related to the caller or to the KMS key that is used to encrypt the private key.  You can use the public key that GenerateDataKeyPair returns to encrypt data or verify a signature outside of KMS. Then, store the encrypted private key with the data. When you are ready to decrypt data or sign a message, you can use the Decrypt operation to decrypt the encrypted private key. To generate a data key pair, you must specify a symmetric encryption KMS key to encrypt the private key in a data key pair. You cannot use an asymmetric KMS key or a KMS key in a custom key store. To get the type and origin of your KMS key, use the DescribeKey operation.  Use the KeyPairSpec parameter to choose an RSA or Elliptic Curve (ECC) data key pair. In China Regions, you can also choose an SM2 data key pair. KMS recommends that you use ECC key pairs for signing, and use RSA and SM2 key pairs for either encryption or signing, but not both. However, KMS cannot enforce any restrictions on the use of data key pairs outside of KMS. If you are using the data key pair to encrypt data, or for any operation where you don't immediately need a private key, consider using the GenerateDataKeyPairWithoutPlaintext operation. GenerateDataKeyPairWithoutPlaintext returns a plaintext public key and an encrypted private key, but omits the plaintext private key that you need only to decrypt ciphertext or sign a message. Later, when you need to decrypt the data or sign a message, use the Decrypt operation to decrypt the encrypted private key in the data key pair.  GenerateDataKeyPair returns a unique data key pair for each request. The bytes in the keys are random; they are not related to the caller or the KMS key that is used to encrypt the private key. The public key is a DER-encoded X.509 SubjectPublicKeyInfo, as specified in RFC 5280. The private key is a DER-encoded PKCS8 PrivateKeyInfo, as specified in RFC 5958. You can use an optional encryption context to add additional security to the encryption operation. If you specify an EncryptionContext, you must specify the same encryption context (a case-sensitive exact match) when decrypting the encrypted data key. Otherwise, the request to decrypt fails with an InvalidCiphertextException. For more information, see Encryption Context in the Key Management Service Developer Guide. The KMS key that you use for this operation must be in a compatible key state. For details, see Key states of KMS keys in the Key Management Service Developer Guide.  Cross-account use: Yes. To perform this operation with a KMS key in a different Amazon Web Services account, specify the key ARN or alias ARN in the value of the KeyId parameter.  Required permissions: kms:GenerateDataKeyPair (key policy)  Related operations:     Decrypt     Encrypt     GenerateDataKey     GenerateDataKeyPairWithoutPlaintext     GenerateDataKeyWithoutPlaintext   
    */
   generateDataKeyPair(callback?: (err: AWSError, data: KMS.Types.GenerateDataKeyPairResponse) => void): Request<KMS.Types.GenerateDataKeyPairResponse, AWSError>;
   /**
-   * Returns a unique asymmetric data key pair for use outside of KMS. This operation returns a plaintext public key and a copy of the private key that is encrypted under the symmetric encryption KMS key you specify. Unlike GenerateDataKeyPair, this operation does not return a plaintext private key. The bytes in the keys are random; they are not related to the caller or to the KMS key that is used to encrypt the private key.  You can use the public key that GenerateDataKeyPairWithoutPlaintext returns to encrypt data or verify a signature outside of KMS. Then, store the encrypted private key with the data. When you are ready to decrypt data or sign a message, you can use the Decrypt operation to decrypt the encrypted private key. To generate a data key pair, you must specify a symmetric encryption KMS key to encrypt the private key in a data key pair. You cannot use an asymmetric KMS key or a KMS key in a custom key store. To get the type and origin of your KMS key, use the DescribeKey operation.  Use the KeyPairSpec parameter to choose an RSA or Elliptic Curve (ECC) data key pair. KMS recommends that your use ECC key pairs for signing, and use RSA key pairs for either encryption or signing, but not both. However, KMS cannot enforce any restrictions on the use of data key pairs outside of KMS.  GenerateDataKeyPairWithoutPlaintext returns a unique data key pair for each request. The bytes in the key are not related to the caller or KMS key that is used to encrypt the private key. The public key is a DER-encoded X.509 SubjectPublicKeyInfo, as specified in RFC 5280. You can use an optional encryption context to add additional security to the encryption operation. If you specify an EncryptionContext, you must specify the same encryption context (a case-sensitive exact match) when decrypting the encrypted data key. Otherwise, the request to decrypt fails with an InvalidCiphertextException. For more information, see Encryption Context in the Key Management Service Developer Guide. The KMS key that you use for this operation must be in a compatible key state. For details, see Key states of KMS keys in the Key Management Service Developer Guide.  Cross-account use: Yes. To perform this operation with a KMS key in a different Amazon Web Services account, specify the key ARN or alias ARN in the value of the KeyId parameter.  Required permissions: kms:GenerateDataKeyPairWithoutPlaintext (key policy)  Related operations:     Decrypt     Encrypt     GenerateDataKey     GenerateDataKeyPair     GenerateDataKeyWithoutPlaintext   
+   * Returns a unique asymmetric data key pair for use outside of KMS. This operation returns a plaintext public key and a copy of the private key that is encrypted under the symmetric encryption KMS key you specify. Unlike GenerateDataKeyPair, this operation does not return a plaintext private key. The bytes in the keys are random; they are not related to the caller or to the KMS key that is used to encrypt the private key.  You can use the public key that GenerateDataKeyPairWithoutPlaintext returns to encrypt data or verify a signature outside of KMS. Then, store the encrypted private key with the data. When you are ready to decrypt data or sign a message, you can use the Decrypt operation to decrypt the encrypted private key. To generate a data key pair, you must specify a symmetric encryption KMS key to encrypt the private key in a data key pair. You cannot use an asymmetric KMS key or a KMS key in a custom key store. To get the type and origin of your KMS key, use the DescribeKey operation.  Use the KeyPairSpec parameter to choose an RSA or Elliptic Curve (ECC) data key pair. In China Regions, you can also choose an SM2 data key pair. KMS recommends that you use ECC key pairs for signing, and use RSA and SM2 key pairs for either encryption or signing, but not both. However, KMS cannot enforce any restrictions on the use of data key pairs outside of KMS.  GenerateDataKeyPairWithoutPlaintext returns a unique data key pair for each request. The bytes in the key are not related to the caller or KMS key that is used to encrypt the private key. The public key is a DER-encoded X.509 SubjectPublicKeyInfo, as specified in RFC 5280. You can use an optional encryption context to add additional security to the encryption operation. If you specify an EncryptionContext, you must specify the same encryption context (a case-sensitive exact match) when decrypting the encrypted data key. Otherwise, the request to decrypt fails with an InvalidCiphertextException. For more information, see Encryption Context in the Key Management Service Developer Guide. The KMS key that you use for this operation must be in a compatible key state. For details, see Key states of KMS keys in the Key Management Service Developer Guide.  Cross-account use: Yes. To perform this operation with a KMS key in a different Amazon Web Services account, specify the key ARN or alias ARN in the value of the KeyId parameter.  Required permissions: kms:GenerateDataKeyPairWithoutPlaintext (key policy)  Related operations:     Decrypt     Encrypt     GenerateDataKey     GenerateDataKeyPair     GenerateDataKeyWithoutPlaintext   
    */
   generateDataKeyPairWithoutPlaintext(params: KMS.Types.GenerateDataKeyPairWithoutPlaintextRequest, callback?: (err: AWSError, data: KMS.Types.GenerateDataKeyPairWithoutPlaintextResponse) => void): Request<KMS.Types.GenerateDataKeyPairWithoutPlaintextResponse, AWSError>;
   /**
-   * Returns a unique asymmetric data key pair for use outside of KMS. This operation returns a plaintext public key and a copy of the private key that is encrypted under the symmetric encryption KMS key you specify. Unlike GenerateDataKeyPair, this operation does not return a plaintext private key. The bytes in the keys are random; they are not related to the caller or to the KMS key that is used to encrypt the private key.  You can use the public key that GenerateDataKeyPairWithoutPlaintext returns to encrypt data or verify a signature outside of KMS. Then, store the encrypted private key with the data. When you are ready to decrypt data or sign a message, you can use the Decrypt operation to decrypt the encrypted private key. To generate a data key pair, you must specify a symmetric encryption KMS key to encrypt the private key in a data key pair. You cannot use an asymmetric KMS key or a KMS key in a custom key store. To get the type and origin of your KMS key, use the DescribeKey operation.  Use the KeyPairSpec parameter to choose an RSA or Elliptic Curve (ECC) data key pair. KMS recommends that your use ECC key pairs for signing, and use RSA key pairs for either encryption or signing, but not both. However, KMS cannot enforce any restrictions on the use of data key pairs outside of KMS.  GenerateDataKeyPairWithoutPlaintext returns a unique data key pair for each request. The bytes in the key are not related to the caller or KMS key that is used to encrypt the private key. The public key is a DER-encoded X.509 SubjectPublicKeyInfo, as specified in RFC 5280. You can use an optional encryption context to add additional security to the encryption operation. If you specify an EncryptionContext, you must specify the same encryption context (a case-sensitive exact match) when decrypting the encrypted data key. Otherwise, the request to decrypt fails with an InvalidCiphertextException. For more information, see Encryption Context in the Key Management Service Developer Guide. The KMS key that you use for this operation must be in a compatible key state. For details, see Key states of KMS keys in the Key Management Service Developer Guide.  Cross-account use: Yes. To perform this operation with a KMS key in a different Amazon Web Services account, specify the key ARN or alias ARN in the value of the KeyId parameter.  Required permissions: kms:GenerateDataKeyPairWithoutPlaintext (key policy)  Related operations:     Decrypt     Encrypt     GenerateDataKey     GenerateDataKeyPair     GenerateDataKeyWithoutPlaintext   
+   * Returns a unique asymmetric data key pair for use outside of KMS. This operation returns a plaintext public key and a copy of the private key that is encrypted under the symmetric encryption KMS key you specify. Unlike GenerateDataKeyPair, this operation does not return a plaintext private key. The bytes in the keys are random; they are not related to the caller or to the KMS key that is used to encrypt the private key.  You can use the public key that GenerateDataKeyPairWithoutPlaintext returns to encrypt data or verify a signature outside of KMS. Then, store the encrypted private key with the data. When you are ready to decrypt data or sign a message, you can use the Decrypt operation to decrypt the encrypted private key. To generate a data key pair, you must specify a symmetric encryption KMS key to encrypt the private key in a data key pair. You cannot use an asymmetric KMS key or a KMS key in a custom key store. To get the type and origin of your KMS key, use the DescribeKey operation.  Use the KeyPairSpec parameter to choose an RSA or Elliptic Curve (ECC) data key pair. In China Regions, you can also choose an SM2 data key pair. KMS recommends that you use ECC key pairs for signing, and use RSA and SM2 key pairs for either encryption or signing, but not both. However, KMS cannot enforce any restrictions on the use of data key pairs outside of KMS.  GenerateDataKeyPairWithoutPlaintext returns a unique data key pair for each request. The bytes in the key are not related to the caller or KMS key that is used to encrypt the private key. The public key is a DER-encoded X.509 SubjectPublicKeyInfo, as specified in RFC 5280. You can use an optional encryption context to add additional security to the encryption operation. If you specify an EncryptionContext, you must specify the same encryption context (a case-sensitive exact match) when decrypting the encrypted data key. Otherwise, the request to decrypt fails with an InvalidCiphertextException. For more information, see Encryption Context in the Key Management Service Developer Guide. The KMS key that you use for this operation must be in a compatible key state. For details, see Key states of KMS keys in the Key Management Service Developer Guide.  Cross-account use: Yes. To perform this operation with a KMS key in a different Amazon Web Services account, specify the key ARN or alias ARN in the value of the KeyId parameter.  Required permissions: kms:GenerateDataKeyPairWithoutPlaintext (key policy)  Related operations:     Decrypt     Encrypt     GenerateDataKey     GenerateDataKeyPair     GenerateDataKeyWithoutPlaintext   
    */
   generateDataKeyPairWithoutPlaintext(callback?: (err: AWSError, data: KMS.Types.GenerateDataKeyPairWithoutPlaintextResponse) => void): Request<KMS.Types.GenerateDataKeyPairWithoutPlaintextResponse, AWSError>;
   /**
@@ -196,11 +196,11 @@ declare class KMS extends Service {
    */
   generateMac(callback?: (err: AWSError, data: KMS.Types.GenerateMacResponse) => void): Request<KMS.Types.GenerateMacResponse, AWSError>;
   /**
-   * Returns a random byte string that is cryptographically secure. By default, the random byte string is generated in KMS. To generate the byte string in the CloudHSM cluster that is associated with a custom key store, specify the custom key store ID. Applications in Amazon Web Services Nitro Enclaves can call this operation by using the Amazon Web Services Nitro Enclaves Development Kit. For information about the supporting parameters, see How Amazon Web Services Nitro Enclaves use KMS in the Key Management Service Developer Guide. For more information about entropy and random number generation, see Key Management Service Cryptographic Details.  Required permissions: kms:GenerateRandom (IAM policy)
+   * Returns a random byte string that is cryptographically secure. You must use the NumberOfBytes parameter to specify the length of the random byte string. There is no default value for string length. By default, the random byte string is generated in KMS. To generate the byte string in the CloudHSM cluster that is associated with a custom key store, specify the custom key store ID. Applications in Amazon Web Services Nitro Enclaves can call this operation by using the Amazon Web Services Nitro Enclaves Development Kit. For information about the supporting parameters, see How Amazon Web Services Nitro Enclaves use KMS in the Key Management Service Developer Guide. For more information about entropy and random number generation, see Key Management Service Cryptographic Details.  Cross-account use: Not applicable. GenerateRandom does not use any account-specific resources, such as KMS keys.  Required permissions: kms:GenerateRandom (IAM policy)
    */
   generateRandom(params: KMS.Types.GenerateRandomRequest, callback?: (err: AWSError, data: KMS.Types.GenerateRandomResponse) => void): Request<KMS.Types.GenerateRandomResponse, AWSError>;
   /**
-   * Returns a random byte string that is cryptographically secure. By default, the random byte string is generated in KMS. To generate the byte string in the CloudHSM cluster that is associated with a custom key store, specify the custom key store ID. Applications in Amazon Web Services Nitro Enclaves can call this operation by using the Amazon Web Services Nitro Enclaves Development Kit. For information about the supporting parameters, see How Amazon Web Services Nitro Enclaves use KMS in the Key Management Service Developer Guide. For more information about entropy and random number generation, see Key Management Service Cryptographic Details.  Required permissions: kms:GenerateRandom (IAM policy)
+   * Returns a random byte string that is cryptographically secure. You must use the NumberOfBytes parameter to specify the length of the random byte string. There is no default value for string length. By default, the random byte string is generated in KMS. To generate the byte string in the CloudHSM cluster that is associated with a custom key store, specify the custom key store ID. Applications in Amazon Web Services Nitro Enclaves can call this operation by using the Amazon Web Services Nitro Enclaves Development Kit. For information about the supporting parameters, see How Amazon Web Services Nitro Enclaves use KMS in the Key Management Service Developer Guide. For more information about entropy and random number generation, see Key Management Service Cryptographic Details.  Cross-account use: Not applicable. GenerateRandom does not use any account-specific resources, such as KMS keys.  Required permissions: kms:GenerateRandom (IAM policy)
    */
   generateRandom(callback?: (err: AWSError, data: KMS.Types.GenerateRandomResponse) => void): Request<KMS.Types.GenerateRandomResponse, AWSError>;
   /**
@@ -228,11 +228,11 @@ declare class KMS extends Service {
    */
   getParametersForImport(callback?: (err: AWSError, data: KMS.Types.GetParametersForImportResponse) => void): Request<KMS.Types.GetParametersForImportResponse, AWSError>;
   /**
-   * Returns the public key of an asymmetric KMS key. Unlike the private key of a asymmetric KMS key, which never leaves KMS unencrypted, callers with kms:GetPublicKey permission can download the public key of an asymmetric KMS key. You can share the public key to allow others to encrypt messages and verify signatures outside of KMS. For information about asymmetric KMS keys, see Asymmetric KMS keys in the Key Management Service Developer Guide. You do not need to download the public key. Instead, you can use the public key within KMS by calling the Encrypt, ReEncrypt, or Verify operations with the identifier of an asymmetric KMS key. When you use the public key within KMS, you benefit from the authentication, authorization, and logging that are part of every KMS operation. You also reduce of risk of encrypting data that cannot be decrypted. These features are not effective outside of KMS. For details, see Special Considerations for Downloading Public Keys. To help you use the public key safely outside of KMS, GetPublicKey returns important information about the public key in the response, including:    KeySpec: The type of key material in the public key, such as RSA_4096 or ECC_NIST_P521.    KeyUsage: Whether the key is used for encryption or signing.    EncryptionAlgorithms or SigningAlgorithms: A list of the encryption algorithms or the signing algorithms for the key.   Although KMS cannot enforce these restrictions on external operations, it is crucial that you use this information to prevent the public key from being used improperly. For example, you can prevent a public signing key from being used encrypt data, or prevent a public key from being used with an encryption algorithm that is not supported by KMS. You can also avoid errors, such as using the wrong signing algorithm in a verification operation. The KMS key that you use for this operation must be in a compatible key state. For details, see Key states of KMS keys in the Key Management Service Developer Guide.  Cross-account use: Yes. To perform this operation with a KMS key in a different Amazon Web Services account, specify the key ARN or alias ARN in the value of the KeyId parameter.  Required permissions: kms:GetPublicKey (key policy)  Related operations: CreateKey 
+   * Returns the public key of an asymmetric KMS key. Unlike the private key of a asymmetric KMS key, which never leaves KMS unencrypted, callers with kms:GetPublicKey permission can download the public key of an asymmetric KMS key. You can share the public key to allow others to encrypt messages and verify signatures outside of KMS. For information about asymmetric KMS keys, see Asymmetric KMS keys in the Key Management Service Developer Guide. You do not need to download the public key. Instead, you can use the public key within KMS by calling the Encrypt, ReEncrypt, or Verify operations with the identifier of an asymmetric KMS key. When you use the public key within KMS, you benefit from the authentication, authorization, and logging that are part of every KMS operation. You also reduce of risk of encrypting data that cannot be decrypted. These features are not effective outside of KMS. To verify a signature outside of KMS with an SM2 public key (China Regions only), you must specify the distinguishing ID. By default, KMS uses 1234567812345678 as the distinguishing ID. For more information, see Offline verification with SM2 key pairs. To help you use the public key safely outside of KMS, GetPublicKey returns important information about the public key in the response, including:    KeySpec: The type of key material in the public key, such as RSA_4096 or ECC_NIST_P521.    KeyUsage: Whether the key is used for encryption or signing.    EncryptionAlgorithms or SigningAlgorithms: A list of the encryption algorithms or the signing algorithms for the key.   Although KMS cannot enforce these restrictions on external operations, it is crucial that you use this information to prevent the public key from being used improperly. For example, you can prevent a public signing key from being used encrypt data, or prevent a public key from being used with an encryption algorithm that is not supported by KMS. You can also avoid errors, such as using the wrong signing algorithm in a verification operation. The KMS key that you use for this operation must be in a compatible key state. For details, see Key states of KMS keys in the Key Management Service Developer Guide.  Cross-account use: Yes. To perform this operation with a KMS key in a different Amazon Web Services account, specify the key ARN or alias ARN in the value of the KeyId parameter.  Required permissions: kms:GetPublicKey (key policy)  Related operations: CreateKey 
    */
   getPublicKey(params: KMS.Types.GetPublicKeyRequest, callback?: (err: AWSError, data: KMS.Types.GetPublicKeyResponse) => void): Request<KMS.Types.GetPublicKeyResponse, AWSError>;
   /**
-   * Returns the public key of an asymmetric KMS key. Unlike the private key of a asymmetric KMS key, which never leaves KMS unencrypted, callers with kms:GetPublicKey permission can download the public key of an asymmetric KMS key. You can share the public key to allow others to encrypt messages and verify signatures outside of KMS. For information about asymmetric KMS keys, see Asymmetric KMS keys in the Key Management Service Developer Guide. You do not need to download the public key. Instead, you can use the public key within KMS by calling the Encrypt, ReEncrypt, or Verify operations with the identifier of an asymmetric KMS key. When you use the public key within KMS, you benefit from the authentication, authorization, and logging that are part of every KMS operation. You also reduce of risk of encrypting data that cannot be decrypted. These features are not effective outside of KMS. For details, see Special Considerations for Downloading Public Keys. To help you use the public key safely outside of KMS, GetPublicKey returns important information about the public key in the response, including:    KeySpec: The type of key material in the public key, such as RSA_4096 or ECC_NIST_P521.    KeyUsage: Whether the key is used for encryption or signing.    EncryptionAlgorithms or SigningAlgorithms: A list of the encryption algorithms or the signing algorithms for the key.   Although KMS cannot enforce these restrictions on external operations, it is crucial that you use this information to prevent the public key from being used improperly. For example, you can prevent a public signing key from being used encrypt data, or prevent a public key from being used with an encryption algorithm that is not supported by KMS. You can also avoid errors, such as using the wrong signing algorithm in a verification operation. The KMS key that you use for this operation must be in a compatible key state. For details, see Key states of KMS keys in the Key Management Service Developer Guide.  Cross-account use: Yes. To perform this operation with a KMS key in a different Amazon Web Services account, specify the key ARN or alias ARN in the value of the KeyId parameter.  Required permissions: kms:GetPublicKey (key policy)  Related operations: CreateKey 
+   * Returns the public key of an asymmetric KMS key. Unlike the private key of a asymmetric KMS key, which never leaves KMS unencrypted, callers with kms:GetPublicKey permission can download the public key of an asymmetric KMS key. You can share the public key to allow others to encrypt messages and verify signatures outside of KMS. For information about asymmetric KMS keys, see Asymmetric KMS keys in the Key Management Service Developer Guide. You do not need to download the public key. Instead, you can use the public key within KMS by calling the Encrypt, ReEncrypt, or Verify operations with the identifier of an asymmetric KMS key. When you use the public key within KMS, you benefit from the authentication, authorization, and logging that are part of every KMS operation. You also reduce of risk of encrypting data that cannot be decrypted. These features are not effective outside of KMS. To verify a signature outside of KMS with an SM2 public key (China Regions only), you must specify the distinguishing ID. By default, KMS uses 1234567812345678 as the distinguishing ID. For more information, see Offline verification with SM2 key pairs. To help you use the public key safely outside of KMS, GetPublicKey returns important information about the public key in the response, including:    KeySpec: The type of key material in the public key, such as RSA_4096 or ECC_NIST_P521.    KeyUsage: Whether the key is used for encryption or signing.    EncryptionAlgorithms or SigningAlgorithms: A list of the encryption algorithms or the signing algorithms for the key.   Although KMS cannot enforce these restrictions on external operations, it is crucial that you use this information to prevent the public key from being used improperly. For example, you can prevent a public signing key from being used encrypt data, or prevent a public key from being used with an encryption algorithm that is not supported by KMS. You can also avoid errors, such as using the wrong signing algorithm in a verification operation. The KMS key that you use for this operation must be in a compatible key state. For details, see Key states of KMS keys in the Key Management Service Developer Guide.  Cross-account use: Yes. To perform this operation with a KMS key in a different Amazon Web Services account, specify the key ARN or alias ARN in the value of the KeyId parameter.  Required permissions: kms:GetPublicKey (key policy)  Related operations: CreateKey 
    */
   getPublicKey(callback?: (err: AWSError, data: KMS.Types.GetPublicKeyResponse) => void): Request<KMS.Types.GetPublicKeyResponse, AWSError>;
   /**
@@ -372,11 +372,11 @@ declare class KMS extends Service {
    */
   updateAlias(callback?: (err: AWSError, data: {}) => void): Request<{}, AWSError>;
   /**
-   * Changes the properties of a custom key store. Use the CustomKeyStoreId parameter to identify the custom key store you want to edit. Use the remaining parameters to change the properties of the custom key store. You can only update a custom key store that is disconnected. To disconnect the custom key store, use DisconnectCustomKeyStore. To reconnect the custom key store after the update completes, use ConnectCustomKeyStore. To find the connection state of a custom key store, use the DescribeCustomKeyStores operation. The CustomKeyStoreId parameter is required in all commands. Use the other parameters of UpdateCustomKeyStore to edit your key store settings.   Use the NewCustomKeyStoreName parameter to change the friendly name of the custom key store to the value that you specify.     Use the KeyStorePassword parameter tell KMS the current password of the  kmsuser crypto user (CU) in the associated CloudHSM cluster. You can use this parameter to fix connection failures that occur when KMS cannot log into the associated cluster because the kmsuser password has changed. This value does not change the password in the CloudHSM cluster.     Use the CloudHsmClusterId parameter to associate the custom key store with a different, but related, CloudHSM cluster. You can use this parameter to repair a custom key store if its CloudHSM cluster becomes corrupted or is deleted, or when you need to create or restore a cluster from a backup.    If the operation succeeds, it returns a JSON object with no properties. This operation is part of the Custom Key Store feature feature in KMS, which combines the convenience and extensive integration of KMS with the isolation and control of a single-tenant key store.  Cross-account use: No. You cannot perform this operation on a custom key store in a different Amazon Web Services account.   Required permissions: kms:UpdateCustomKeyStore (IAM policy)  Related operations:     ConnectCustomKeyStore     CreateCustomKeyStore     DeleteCustomKeyStore     DescribeCustomKeyStores     DisconnectCustomKeyStore   
+   * Changes the properties of a custom key store. Use the CustomKeyStoreId parameter to identify the custom key store you want to edit. Use the remaining parameters to change the properties of the custom key store. You can only update a custom key store that is disconnected. To disconnect the custom key store, use DisconnectCustomKeyStore. To reconnect the custom key store after the update completes, use ConnectCustomKeyStore. To find the connection state of a custom key store, use the DescribeCustomKeyStores operation. The CustomKeyStoreId parameter is required in all commands. Use the other parameters of UpdateCustomKeyStore to edit your key store settings.   Use the NewCustomKeyStoreName parameter to change the friendly name of the custom key store to the value that you specify.     Use the KeyStorePassword parameter tell KMS the current password of the  kmsuser crypto user (CU) in the associated CloudHSM cluster. You can use this parameter to fix connection failures that occur when KMS cannot log into the associated cluster because the kmsuser password has changed. This value does not change the password in the CloudHSM cluster.     Use the CloudHsmClusterId parameter to associate the custom key store with a different, but related, CloudHSM cluster. You can use this parameter to repair a custom key store if its CloudHSM cluster becomes corrupted or is deleted, or when you need to create or restore a cluster from a backup.    If the operation succeeds, it returns a JSON object with no properties. This operation is part of the custom key store feature feature in KMS, which combines the convenience and extensive integration of KMS with the isolation and control of a single-tenant key store.  Cross-account use: No. You cannot perform this operation on a custom key store in a different Amazon Web Services account.   Required permissions: kms:UpdateCustomKeyStore (IAM policy)  Related operations:     ConnectCustomKeyStore     CreateCustomKeyStore     DeleteCustomKeyStore     DescribeCustomKeyStores     DisconnectCustomKeyStore   
    */
   updateCustomKeyStore(params: KMS.Types.UpdateCustomKeyStoreRequest, callback?: (err: AWSError, data: KMS.Types.UpdateCustomKeyStoreResponse) => void): Request<KMS.Types.UpdateCustomKeyStoreResponse, AWSError>;
   /**
-   * Changes the properties of a custom key store. Use the CustomKeyStoreId parameter to identify the custom key store you want to edit. Use the remaining parameters to change the properties of the custom key store. You can only update a custom key store that is disconnected. To disconnect the custom key store, use DisconnectCustomKeyStore. To reconnect the custom key store after the update completes, use ConnectCustomKeyStore. To find the connection state of a custom key store, use the DescribeCustomKeyStores operation. The CustomKeyStoreId parameter is required in all commands. Use the other parameters of UpdateCustomKeyStore to edit your key store settings.   Use the NewCustomKeyStoreName parameter to change the friendly name of the custom key store to the value that you specify.     Use the KeyStorePassword parameter tell KMS the current password of the  kmsuser crypto user (CU) in the associated CloudHSM cluster. You can use this parameter to fix connection failures that occur when KMS cannot log into the associated cluster because the kmsuser password has changed. This value does not change the password in the CloudHSM cluster.     Use the CloudHsmClusterId parameter to associate the custom key store with a different, but related, CloudHSM cluster. You can use this parameter to repair a custom key store if its CloudHSM cluster becomes corrupted or is deleted, or when you need to create or restore a cluster from a backup.    If the operation succeeds, it returns a JSON object with no properties. This operation is part of the Custom Key Store feature feature in KMS, which combines the convenience and extensive integration of KMS with the isolation and control of a single-tenant key store.  Cross-account use: No. You cannot perform this operation on a custom key store in a different Amazon Web Services account.   Required permissions: kms:UpdateCustomKeyStore (IAM policy)  Related operations:     ConnectCustomKeyStore     CreateCustomKeyStore     DeleteCustomKeyStore     DescribeCustomKeyStores     DisconnectCustomKeyStore   
+   * Changes the properties of a custom key store. Use the CustomKeyStoreId parameter to identify the custom key store you want to edit. Use the remaining parameters to change the properties of the custom key store. You can only update a custom key store that is disconnected. To disconnect the custom key store, use DisconnectCustomKeyStore. To reconnect the custom key store after the update completes, use ConnectCustomKeyStore. To find the connection state of a custom key store, use the DescribeCustomKeyStores operation. The CustomKeyStoreId parameter is required in all commands. Use the other parameters of UpdateCustomKeyStore to edit your key store settings.   Use the NewCustomKeyStoreName parameter to change the friendly name of the custom key store to the value that you specify.     Use the KeyStorePassword parameter tell KMS the current password of the  kmsuser crypto user (CU) in the associated CloudHSM cluster. You can use this parameter to fix connection failures that occur when KMS cannot log into the associated cluster because the kmsuser password has changed. This value does not change the password in the CloudHSM cluster.     Use the CloudHsmClusterId parameter to associate the custom key store with a different, but related, CloudHSM cluster. You can use this parameter to repair a custom key store if its CloudHSM cluster becomes corrupted or is deleted, or when you need to create or restore a cluster from a backup.    If the operation succeeds, it returns a JSON object with no properties. This operation is part of the custom key store feature feature in KMS, which combines the convenience and extensive integration of KMS with the isolation and control of a single-tenant key store.  Cross-account use: No. You cannot perform this operation on a custom key store in a different Amazon Web Services account.   Required permissions: kms:UpdateCustomKeyStore (IAM policy)  Related operations:     ConnectCustomKeyStore     CreateCustomKeyStore     DeleteCustomKeyStore     DescribeCustomKeyStores     DisconnectCustomKeyStore   
    */
   updateCustomKeyStore(callback?: (err: AWSError, data: KMS.Types.UpdateCustomKeyStoreResponse) => void): Request<KMS.Types.UpdateCustomKeyStoreResponse, AWSError>;
   /**
@@ -396,11 +396,11 @@ declare class KMS extends Service {
    */
   updatePrimaryRegion(callback?: (err: AWSError, data: {}) => void): Request<{}, AWSError>;
   /**
-   * Verifies a digital signature that was generated by the Sign operation.   Verification confirms that an authorized user signed the message with the specified KMS key and signing algorithm, and the message hasn't changed since it was signed. If the signature is verified, the value of the SignatureValid field in the response is True. If the signature verification fails, the Verify operation fails with an KMSInvalidSignatureException exception. A digital signature is generated by using the private key in an asymmetric KMS key. The signature is verified by using the public key in the same asymmetric KMS key. For information about asymmetric KMS keys, see Asymmetric KMS keys in the Key Management Service Developer Guide. To verify a digital signature, you can use the Verify operation. Specify the same asymmetric KMS key, message, and signing algorithm that were used to produce the signature. You can also verify the digital signature by using the public key of the KMS key outside of KMS. Use the GetPublicKey operation to download the public key in the asymmetric KMS key and then use the public key to verify the signature outside of KMS. The advantage of using the Verify operation is that it is performed within KMS. As a result, it's easy to call, the operation is performed within the FIPS boundary, it is logged in CloudTrail, and you can use key policy and IAM policy to determine who is authorized to use the KMS key to verify signatures. The KMS key that you use for this operation must be in a compatible key state. For details, see Key states of KMS keys in the Key Management Service Developer Guide.  Cross-account use: Yes. To perform this operation with a KMS key in a different Amazon Web Services account, specify the key ARN or alias ARN in the value of the KeyId parameter.   Required permissions: kms:Verify (key policy)  Related operations: Sign 
+   * Verifies a digital signature that was generated by the Sign operation.   Verification confirms that an authorized user signed the message with the specified KMS key and signing algorithm, and the message hasn't changed since it was signed. If the signature is verified, the value of the SignatureValid field in the response is True. If the signature verification fails, the Verify operation fails with an KMSInvalidSignatureException exception. A digital signature is generated by using the private key in an asymmetric KMS key. The signature is verified by using the public key in the same asymmetric KMS key. For information about asymmetric KMS keys, see Asymmetric KMS keys in the Key Management Service Developer Guide. To verify a digital signature, you can use the Verify operation. Specify the same asymmetric KMS key, message, and signing algorithm that were used to produce the signature. You can also verify the digital signature by using the public key of the KMS key outside of KMS. Use the GetPublicKey operation to download the public key in the asymmetric KMS key and then use the public key to verify the signature outside of KMS. To verify a signature outside of KMS with an SM2 public key, you must specify the distinguishing ID. By default, KMS uses 1234567812345678 as the distinguishing ID. For more information, see Offline verification with SM2 key pairs in Key Management Service Developer Guide. The advantage of using the Verify operation is that it is performed within KMS. As a result, it's easy to call, the operation is performed within the FIPS boundary, it is logged in CloudTrail, and you can use key policy and IAM policy to determine who is authorized to use the KMS key to verify signatures. The KMS key that you use for this operation must be in a compatible key state. For details, see Key states of KMS keys in the Key Management Service Developer Guide.  Cross-account use: Yes. To perform this operation with a KMS key in a different Amazon Web Services account, specify the key ARN or alias ARN in the value of the KeyId parameter.   Required permissions: kms:Verify (key policy)  Related operations: Sign 
    */
   verify(params: KMS.Types.VerifyRequest, callback?: (err: AWSError, data: KMS.Types.VerifyResponse) => void): Request<KMS.Types.VerifyResponse, AWSError>;
   /**
-   * Verifies a digital signature that was generated by the Sign operation.   Verification confirms that an authorized user signed the message with the specified KMS key and signing algorithm, and the message hasn't changed since it was signed. If the signature is verified, the value of the SignatureValid field in the response is True. If the signature verification fails, the Verify operation fails with an KMSInvalidSignatureException exception. A digital signature is generated by using the private key in an asymmetric KMS key. The signature is verified by using the public key in the same asymmetric KMS key. For information about asymmetric KMS keys, see Asymmetric KMS keys in the Key Management Service Developer Guide. To verify a digital signature, you can use the Verify operation. Specify the same asymmetric KMS key, message, and signing algorithm that were used to produce the signature. You can also verify the digital signature by using the public key of the KMS key outside of KMS. Use the GetPublicKey operation to download the public key in the asymmetric KMS key and then use the public key to verify the signature outside of KMS. The advantage of using the Verify operation is that it is performed within KMS. As a result, it's easy to call, the operation is performed within the FIPS boundary, it is logged in CloudTrail, and you can use key policy and IAM policy to determine who is authorized to use the KMS key to verify signatures. The KMS key that you use for this operation must be in a compatible key state. For details, see Key states of KMS keys in the Key Management Service Developer Guide.  Cross-account use: Yes. To perform this operation with a KMS key in a different Amazon Web Services account, specify the key ARN or alias ARN in the value of the KeyId parameter.   Required permissions: kms:Verify (key policy)  Related operations: Sign 
+   * Verifies a digital signature that was generated by the Sign operation.   Verification confirms that an authorized user signed the message with the specified KMS key and signing algorithm, and the message hasn't changed since it was signed. If the signature is verified, the value of the SignatureValid field in the response is True. If the signature verification fails, the Verify operation fails with an KMSInvalidSignatureException exception. A digital signature is generated by using the private key in an asymmetric KMS key. The signature is verified by using the public key in the same asymmetric KMS key. For information about asymmetric KMS keys, see Asymmetric KMS keys in the Key Management Service Developer Guide. To verify a digital signature, you can use the Verify operation. Specify the same asymmetric KMS key, message, and signing algorithm that were used to produce the signature. You can also verify the digital signature by using the public key of the KMS key outside of KMS. Use the GetPublicKey operation to download the public key in the asymmetric KMS key and then use the public key to verify the signature outside of KMS. To verify a signature outside of KMS with an SM2 public key, you must specify the distinguishing ID. By default, KMS uses 1234567812345678 as the distinguishing ID. For more information, see Offline verification with SM2 key pairs in Key Management Service Developer Guide. The advantage of using the Verify operation is that it is performed within KMS. As a result, it's easy to call, the operation is performed within the FIPS boundary, it is logged in CloudTrail, and you can use key policy and IAM policy to determine who is authorized to use the KMS key to verify signatures. The KMS key that you use for this operation must be in a compatible key state. For details, see Key states of KMS keys in the Key Management Service Developer Guide.  Cross-account use: Yes. To perform this operation with a KMS key in a different Amazon Web Services account, specify the key ARN or alias ARN in the value of the KeyId parameter.   Required permissions: kms:Verify (key policy)  Related operations: Sign 
    */
   verify(callback?: (err: AWSError, data: KMS.Types.VerifyResponse) => void): Request<KMS.Types.VerifyResponse, AWSError>;
   /**
@@ -463,7 +463,7 @@ declare namespace KMS {
   }
   export interface ConnectCustomKeyStoreResponse {
   }
-  export type ConnectionErrorCodeType = "INVALID_CREDENTIALS"|"CLUSTER_NOT_FOUND"|"NETWORK_ERRORS"|"INTERNAL_ERROR"|"INSUFFICIENT_CLOUDHSM_HSMS"|"USER_LOCKED_OUT"|"USER_NOT_FOUND"|"USER_LOGGED_IN"|"SUBNET_NOT_FOUND"|string;
+  export type ConnectionErrorCodeType = "INVALID_CREDENTIALS"|"CLUSTER_NOT_FOUND"|"NETWORK_ERRORS"|"INTERNAL_ERROR"|"INSUFFICIENT_CLOUDHSM_HSMS"|"USER_LOCKED_OUT"|"USER_NOT_FOUND"|"USER_LOGGED_IN"|"SUBNET_NOT_FOUND"|"INSUFFICIENT_FREE_ADDRESSES_IN_SUBNET"|string;
   export type ConnectionStateType = "CONNECTED"|"CONNECTING"|"FAILED"|"DISCONNECTED"|"DISCONNECTING"|string;
   export interface CreateAliasRequest {
     /**
@@ -483,15 +483,15 @@ declare namespace KMS {
     /**
      * Identifies the CloudHSM cluster for the custom key store. Enter the cluster ID of any active CloudHSM cluster that is not already associated with a custom key store. To find the cluster ID, use the DescribeClusters operation.
      */
-    CloudHsmClusterId: CloudHsmClusterIdType;
+    CloudHsmClusterId?: CloudHsmClusterIdType;
     /**
      * Enter the content of the trust anchor certificate for the cluster. This is the content of the customerCA.crt file that you created when you initialized the cluster.
      */
-    TrustAnchorCertificate: TrustAnchorCertificateType;
+    TrustAnchorCertificate?: TrustAnchorCertificateType;
     /**
      * Enter the password of the  kmsuser crypto user (CU) account in the specified CloudHSM cluster. KMS logs into the cluster as this user to manage key material on your behalf. The password must be a string of 7 to 32 characters. Its value is case sensitive. This parameter tells KMS the kmsuser account password; it does not change the password in the CloudHSM cluster.
      */
-    KeyStorePassword: KeyStorePasswordType;
+    KeyStorePassword?: KeyStorePasswordType;
   }
   export interface CreateCustomKeyStoreResponse {
     /**
@@ -541,7 +541,7 @@ declare namespace KMS {
   }
   export interface CreateKeyRequest {
     /**
-     * The key policy to attach to the KMS key. If you do not specify a key policy, KMS attaches a default key policy to the KMS key. For more information, see Default key policy in the Key Management Service Developer Guide. If you provide a key policy, it must meet the following criteria:   If you don't set BypassPolicyLockoutSafetyCheck to True, the key policy must allow the principal that is making the CreateKey request to make a subsequent PutKeyPolicy request on the KMS key. This reduces the risk that the KMS key becomes unmanageable. For more information, refer to the scenario in the Default Key Policy section of the  Key Management Service Developer Guide .   Each statement in the key policy must contain one or more principals. The principals in the key policy must exist and be visible to KMS. When you create a new Amazon Web Services principal (for example, an IAM user or role), you might need to enforce a delay before including the new principal in a key policy because the new principal might not be immediately visible to KMS. For more information, see Changes that I make are not always immediately visible in the Amazon Web Services Identity and Access Management User Guide.   A key policy document must conform to the following rules.   Up to 32 kilobytes (32768 bytes)   Must be UTF-8 encoded   The only Unicode characters that are permitted in a key policy document are the horizontal tab (U+0009), linefeed (U+000A), carriage return (U+000D), and characters in the range U+0020 to U+00FF.   The Sid element in a key policy statement can include spaces. (Spaces are prohibited in the Sid element of an IAM policy document.)   For help writing and formatting a JSON policy document, see the IAM JSON Policy Reference in the  Identity and Access Management User Guide .
+     * The key policy to attach to the KMS key. If you do not specify a key policy, KMS attaches a default key policy to the KMS key. For more information, see Default key policy in the Key Management Service Developer Guide. If you provide a key policy, it must meet the following criteria:   If you don't set BypassPolicyLockoutSafetyCheck to True, the key policy must allow the principal that is making the CreateKey request to make a subsequent PutKeyPolicy request on the KMS key. This reduces the risk that the KMS key becomes unmanageable. For more information, refer to the scenario in the Default Key Policy section of the  Key Management Service Developer Guide .   Each statement in the key policy must contain one or more principals. The principals in the key policy must exist and be visible to KMS. When you create a new Amazon Web Services principal (for example, an IAM user or role), you might need to enforce a delay before including the new principal in a key policy because the new principal might not be immediately visible to KMS. For more information, see Changes that I make are not always immediately visible in the Amazon Web Services Identity and Access Management User Guide.   A key policy document can include only the following characters:   Printable ASCII characters from the space character (\u0020) through the end of the ASCII character range.   Printable characters in the Basic Latin and Latin-1 Supplement character set (through \u00FF).   The tab (\u0009), line feed (\u000A), and carriage return (\u000D) special characters   For information about key policies, see Key policies in KMS in the Key Management Service Developer Guide. For help writing and formatting a JSON policy document, see the IAM JSON Policy Reference in the  Identity and Access Management User Guide .
      */
     Policy?: PolicyType;
     /**
@@ -549,7 +549,7 @@ declare namespace KMS {
      */
     Description?: DescriptionType;
     /**
-     * Determines the cryptographic operations for which you can use the KMS key. The default value is ENCRYPT_DECRYPT. This parameter is optional when you are creating a symmetric encryption KMS key; otherwise, it is required. You can't change the KeyUsage value after the KMS key is created. Select only one valid value.   For symmetric encryption KMS keys, omit the parameter or specify ENCRYPT_DECRYPT.   For HMAC KMS keys (symmetric), specify GENERATE_VERIFY_MAC.   For asymmetric KMS keys with RSA key material, specify ENCRYPT_DECRYPT or SIGN_VERIFY.   For asymmetric KMS keys with ECC key material, specify SIGN_VERIFY.  
+     * Determines the cryptographic operations for which you can use the KMS key. The default value is ENCRYPT_DECRYPT. This parameter is optional when you are creating a symmetric encryption KMS key; otherwise, it is required. You can't change the KeyUsage value after the KMS key is created. Select only one valid value.   For symmetric encryption KMS keys, omit the parameter or specify ENCRYPT_DECRYPT.   For HMAC KMS keys (symmetric), specify GENERATE_VERIFY_MAC.   For asymmetric KMS keys with RSA key material, specify ENCRYPT_DECRYPT or SIGN_VERIFY.   For asymmetric KMS keys with ECC key material, specify SIGN_VERIFY.   For asymmetric KMS keys with SM2 key material (China Regions only), specify ENCRYPT_DECRYPT or SIGN_VERIFY.  
      */
     KeyUsage?: KeyUsageType;
     /**
@@ -557,7 +557,7 @@ declare namespace KMS {
      */
     CustomerMasterKeySpec?: CustomerMasterKeySpec;
     /**
-     * Specifies the type of KMS key to create. The default value, SYMMETRIC_DEFAULT, creates a KMS key with a 256-bit symmetric key for encryption and decryption. For help choosing a key spec for your KMS key, see Choosing a KMS key type in the  Key Management Service Developer Guide . The KeySpec determines whether the KMS key contains a symmetric key or an asymmetric key pair. It also determines the cryptographic algorithms that the KMS key supports. You can't change the KeySpec after the KMS key is created. To further restrict the algorithms that can be used with the KMS key, use a condition key in its key policy or IAM policy. For more information, see kms:EncryptionAlgorithm, kms:MacAlgorithm or kms:Signing Algorithm in the  Key Management Service Developer Guide .   Amazon Web Services services that are integrated with KMS use symmetric encryption KMS keys to protect your data. These services do not support asymmetric KMS keys or HMAC KMS keys.  KMS supports the following key specs for KMS keys:   Symmetric encryption key (default)    SYMMETRIC_DEFAULT (AES-256-GCM)     HMAC keys (symmetric)    HMAC_224     HMAC_256     HMAC_384     HMAC_512      Asymmetric RSA key pairs    RSA_2048     RSA_3072     RSA_4096      Asymmetric NIST-recommended elliptic curve key pairs    ECC_NIST_P256 (secp256r1)    ECC_NIST_P384 (secp384r1)    ECC_NIST_P521 (secp521r1)     Other asymmetric elliptic curve key pairs    ECC_SECG_P256K1 (secp256k1), commonly used for cryptocurrencies.    
+     * Specifies the type of KMS key to create. The default value, SYMMETRIC_DEFAULT, creates a KMS key with a 256-bit AES-GCM key that is used for encryption and decryption, except in China Regions, where it creates a 128-bit symmetric key that uses SM4 encryption. For help choosing a key spec for your KMS key, see Choosing a KMS key type in the  Key Management Service Developer Guide . The KeySpec determines whether the KMS key contains a symmetric key or an asymmetric key pair. It also determines the cryptographic algorithms that the KMS key supports. You can't change the KeySpec after the KMS key is created. To further restrict the algorithms that can be used with the KMS key, use a condition key in its key policy or IAM policy. For more information, see kms:EncryptionAlgorithm, kms:MacAlgorithm or kms:Signing Algorithm in the  Key Management Service Developer Guide .   Amazon Web Services services that are integrated with KMS use symmetric encryption KMS keys to protect your data. These services do not support asymmetric KMS keys or HMAC KMS keys.  KMS supports the following key specs for KMS keys:   Symmetric encryption key (default)    SYMMETRIC_DEFAULT      HMAC keys (symmetric)    HMAC_224     HMAC_256     HMAC_384     HMAC_512      Asymmetric RSA key pairs    RSA_2048     RSA_3072     RSA_4096      Asymmetric NIST-recommended elliptic curve key pairs    ECC_NIST_P256 (secp256r1)    ECC_NIST_P384 (secp384r1)    ECC_NIST_P521 (secp521r1)     Other asymmetric elliptic curve key pairs    ECC_SECG_P256K1 (secp256k1), commonly used for cryptocurrencies.     SM2 key pairs (China Regions only)    SM2     
      */
     KeySpec?: KeySpec;
     /**
@@ -565,7 +565,7 @@ declare namespace KMS {
      */
     Origin?: OriginType;
     /**
-     * Creates the KMS key in the specified custom key store and the key material in its associated CloudHSM cluster. To create a KMS key in a custom key store, you must also specify the Origin parameter with a value of AWS_CLOUDHSM. The CloudHSM cluster that is associated with the custom key store must have at least two active HSMs, each in a different Availability Zone in the Region. This parameter is valid only for symmetric encryption KMS keys in a single Region. You cannot create any other type of KMS key in a custom key store. To find the ID of a custom key store, use the DescribeCustomKeyStores operation. The response includes the custom key store ID and the ID of the CloudHSM cluster. This operation is part of the Custom Key Store feature feature in KMS, which combines the convenience and extensive integration of KMS with the isolation and control of a single-tenant key store.
+     * Creates the KMS key in the specified custom key store and the key material in its associated CloudHSM cluster. To create a KMS key in a custom key store, you must also specify the Origin parameter with a value of AWS_CLOUDHSM. The CloudHSM cluster that is associated with the custom key store must have at least two active HSMs, each in a different Availability Zone in the Region. This parameter is valid only for symmetric encryption KMS keys in a single Region. You cannot create any other type of KMS key in a custom key store. To find the ID of a custom key store, use the DescribeCustomKeyStores operation. The response includes the custom key store ID and the ID of the CloudHSM cluster. This operation is part of the custom key store feature feature in KMS, which combines the convenience and extensive integration of KMS with the isolation and control of a single-tenant key store.
      */
     CustomKeyStoreId?: CustomKeyStoreIdType;
     /**
@@ -620,8 +620,8 @@ declare namespace KMS {
      */
     CreationDate?: DateType;
   }
-  export type CustomerMasterKeySpec = "RSA_2048"|"RSA_3072"|"RSA_4096"|"ECC_NIST_P256"|"ECC_NIST_P384"|"ECC_NIST_P521"|"ECC_SECG_P256K1"|"SYMMETRIC_DEFAULT"|"HMAC_224"|"HMAC_256"|"HMAC_384"|"HMAC_512"|string;
-  export type DataKeyPairSpec = "RSA_2048"|"RSA_3072"|"RSA_4096"|"ECC_NIST_P256"|"ECC_NIST_P384"|"ECC_NIST_P521"|"ECC_SECG_P256K1"|string;
+  export type CustomerMasterKeySpec = "RSA_2048"|"RSA_3072"|"RSA_4096"|"ECC_NIST_P256"|"ECC_NIST_P384"|"ECC_NIST_P521"|"ECC_SECG_P256K1"|"SYMMETRIC_DEFAULT"|"HMAC_224"|"HMAC_256"|"HMAC_384"|"HMAC_512"|"SM2"|string;
+  export type DataKeyPairSpec = "RSA_2048"|"RSA_3072"|"RSA_4096"|"ECC_NIST_P256"|"ECC_NIST_P384"|"ECC_NIST_P521"|"ECC_SECG_P256K1"|"SM2"|string;
   export type DataKeySpec = "AES_256"|"AES_128"|string;
   export type DateType = Date;
   export interface DecryptRequest {
@@ -797,7 +797,7 @@ declare namespace KMS {
      */
     EncryptionAlgorithm?: EncryptionAlgorithmSpec;
   }
-  export type EncryptionAlgorithmSpec = "SYMMETRIC_DEFAULT"|"RSAES_OAEP_SHA_1"|"RSAES_OAEP_SHA_256"|string;
+  export type EncryptionAlgorithmSpec = "SYMMETRIC_DEFAULT"|"RSAES_OAEP_SHA_1"|"RSAES_OAEP_SHA_256"|"SM2PKE"|string;
   export type EncryptionAlgorithmSpecList = EncryptionAlgorithmSpec[];
   export type EncryptionContextKey = string;
   export type EncryptionContextType = {[key: string]: EncryptionContextValue};
@@ -813,7 +813,7 @@ declare namespace KMS {
      */
     KeyId: KeyIdType;
     /**
-     * Determines the type of data key pair that is generated.  The KMS rule that restricts the use of asymmetric RSA KMS keys to encrypt and decrypt or to sign and verify (but not both), and the rule that permits you to use ECC KMS keys only to sign and verify, are not effective on data key pairs, which are used outside of KMS.
+     * Determines the type of data key pair that is generated.  The KMS rule that restricts the use of asymmetric RSA and SM2 KMS keys to encrypt and decrypt or to sign and verify (but not both), and the rule that permits you to use ECC KMS keys only to sign and verify, are not effective on data key pairs, which are used outside of KMS. The SM2 key spec is only available in China Regions. RSA and ECC asymmetric key pairs are also available in China Regions.
      */
     KeyPairSpec: DataKeyPairSpec;
     /**
@@ -853,7 +853,7 @@ declare namespace KMS {
      */
     KeyId: KeyIdType;
     /**
-     * Determines the type of data key pair that is generated. The KMS rule that restricts the use of asymmetric RSA KMS keys to encrypt and decrypt or to sign and verify (but not both), and the rule that permits you to use ECC KMS keys only to sign and verify, are not effective on data key pairs, which are used outside of KMS.
+     * Determines the type of data key pair that is generated. The KMS rule that restricts the use of asymmetric RSA and SM2 KMS keys to encrypt and decrypt or to sign and verify (but not both), and the rule that permits you to use ECC KMS keys only to sign and verify, are not effective on data key pairs, which are used outside of KMS. The SM2 key spec is only available in China Regions. RSA and ECC asymmetric key pairs are also available in China Regions.
      */
     KeyPairSpec: DataKeyPairSpec;
     /**
@@ -981,7 +981,7 @@ declare namespace KMS {
   }
   export interface GenerateRandomRequest {
     /**
-     * The length of the byte string.
+     * The length of the random byte string. This parameter is required.
      */
     NumberOfBytes?: NumberOfBytesType;
     /**
@@ -1281,7 +1281,7 @@ declare namespace KMS {
      */
     MacAlgorithms?: MacAlgorithmSpecList;
   }
-  export type KeySpec = "RSA_2048"|"RSA_3072"|"RSA_4096"|"ECC_NIST_P256"|"ECC_NIST_P384"|"ECC_NIST_P521"|"ECC_SECG_P256K1"|"SYMMETRIC_DEFAULT"|"HMAC_224"|"HMAC_256"|"HMAC_384"|"HMAC_512"|string;
+  export type KeySpec = "RSA_2048"|"RSA_3072"|"RSA_4096"|"ECC_NIST_P256"|"ECC_NIST_P384"|"ECC_NIST_P521"|"ECC_SECG_P256K1"|"SYMMETRIC_DEFAULT"|"HMAC_224"|"HMAC_256"|"HMAC_384"|"HMAC_512"|"SM2"|string;
   export type KeyState = "Creating"|"Enabled"|"Disabled"|"PendingDeletion"|"PendingImport"|"PendingReplicaDeletion"|"Unavailable"|"Updating"|string;
   export type KeyStorePasswordType = string;
   export type KeyUsageType = "SIGN_VERIFY"|"ENCRYPT_DECRYPT"|"GENERATE_VERIFY_MAC"|string;
@@ -1494,7 +1494,7 @@ declare namespace KMS {
      */
     PolicyName: PolicyNameType;
     /**
-     * The key policy to attach to the KMS key. The key policy must meet the following criteria:   If you don't set BypassPolicyLockoutSafetyCheck to true, the key policy must allow the principal that is making the PutKeyPolicy request to make a subsequent PutKeyPolicy request on the KMS key. This reduces the risk that the KMS key becomes unmanageable. For more information, refer to the scenario in the Default Key Policy section of the Key Management Service Developer Guide.   Each statement in the key policy must contain one or more principals. The principals in the key policy must exist and be visible to KMS. When you create a new Amazon Web Services principal (for example, an IAM user or role), you might need to enforce a delay before including the new principal in a key policy because the new principal might not be immediately visible to KMS. For more information, see Changes that I make are not always immediately visible in the Amazon Web Services Identity and Access Management User Guide.   A key policy document must conform to the following rules.   Up to 32 kilobytes (32768 bytes)   Must be UTF-8 encoded   The only Unicode characters that are permitted in a key policy document are the horizontal tab (U+0009), linefeed (U+000A), carriage return (U+000D), and characters in the range U+0020 to U+00FF.   The Sid element in a key policy statement can include spaces. (Spaces are prohibited in the Sid element of an IAM policy document.)  
+     * The key policy to attach to the KMS key. The key policy must meet the following criteria:   If you don't set BypassPolicyLockoutSafetyCheck to true, the key policy must allow the principal that is making the PutKeyPolicy request to make a subsequent PutKeyPolicy request on the KMS key. This reduces the risk that the KMS key becomes unmanageable. For more information, refer to the scenario in the Default Key Policy section of the Key Management Service Developer Guide.   Each statement in the key policy must contain one or more principals. The principals in the key policy must exist and be visible to KMS. When you create a new Amazon Web Services principal (for example, an IAM user or role), you might need to enforce a delay before including the new principal in a key policy because the new principal might not be immediately visible to KMS. For more information, see Changes that I make are not always immediately visible in the Amazon Web Services Identity and Access Management User Guide.   A key policy document can include only the following characters:   Printable ASCII characters from the space character (\u0020) through the end of the ASCII character range.   Printable characters in the Basic Latin and Latin-1 Supplement character set (through \u00FF).   The tab (\u0009), line feed (\u000A), and carriage return (\u000D) special characters   For information about key policies, see Key policies in KMS in the Key Management Service Developer Guide. For help writing and formatting a JSON policy document, see the IAM JSON Policy Reference in the  Identity and Access Management User Guide .
      */
     Policy: PolicyType;
     /**
@@ -1569,7 +1569,7 @@ declare namespace KMS {
      */
     ReplicaRegion: RegionType;
     /**
-     * The key policy to attach to the KMS key. This parameter is optional. If you do not provide a key policy, KMS attaches the default key policy to the KMS key. The key policy is not a shared property of multi-Region keys. You can specify the same key policy or a different key policy for each key in a set of related multi-Region keys. KMS does not synchronize this property. If you provide a key policy, it must meet the following criteria:   If you don't set BypassPolicyLockoutSafetyCheck to true, the key policy must give the caller kms:PutKeyPolicy permission on the replica key. This reduces the risk that the KMS key becomes unmanageable. For more information, refer to the scenario in the Default Key Policy section of the  Key Management Service Developer Guide .   Each statement in the key policy must contain one or more principals. The principals in the key policy must exist and be visible to KMS. When you create a new Amazon Web Services principal (for example, an IAM user or role), you might need to enforce a delay before including the new principal in a key policy because the new principal might not be immediately visible to KMS. For more information, see Changes that I make are not always immediately visible in the  Identity and Access Management User Guide .   A key policy document must conform to the following rules.   Up to 32 kilobytes (32768 bytes)   Must be UTF-8 encoded   The only Unicode characters that are permitted in a key policy document are the horizontal tab (U+0009), linefeed (U+000A), carriage return (U+000D), and characters in the range U+0020 to U+00FF.   The Sid element in a key policy statement can include spaces. (Spaces are prohibited in the Sid element of an IAM policy document.)  
+     * The key policy to attach to the KMS key. This parameter is optional. If you do not provide a key policy, KMS attaches the default key policy to the KMS key. The key policy is not a shared property of multi-Region keys. You can specify the same key policy or a different key policy for each key in a set of related multi-Region keys. KMS does not synchronize this property. If you provide a key policy, it must meet the following criteria:   If you don't set BypassPolicyLockoutSafetyCheck to true, the key policy must give the caller kms:PutKeyPolicy permission on the replica key. This reduces the risk that the KMS key becomes unmanageable. For more information, refer to the scenario in the Default Key Policy section of the  Key Management Service Developer Guide .   Each statement in the key policy must contain one or more principals. The principals in the key policy must exist and be visible to KMS. When you create a new Amazon Web Services principal (for example, an IAM user or role), you might need to enforce a delay before including the new principal in a key policy because the new principal might not be immediately visible to KMS. For more information, see Changes that I make are not always immediately visible in the  Identity and Access Management User Guide .   A key policy document can include only the following characters:   Printable ASCII characters from the space character (\u0020) through the end of the ASCII character range.   Printable characters in the Basic Latin and Latin-1 Supplement character set (through \u00FF).   The tab (\u0009), line feed (\u000A), and carriage return (\u000D) special characters   For information about key policies, see Key policies in KMS in the Key Management Service Developer Guide. For help writing and formatting a JSON policy document, see the IAM JSON Policy Reference in the  Identity and Access Management User Guide .
      */
     Policy?: PolicyType;
     /**
@@ -1687,7 +1687,7 @@ declare namespace KMS {
      */
     SigningAlgorithm?: SigningAlgorithmSpec;
   }
-  export type SigningAlgorithmSpec = "RSASSA_PSS_SHA_256"|"RSASSA_PSS_SHA_384"|"RSASSA_PSS_SHA_512"|"RSASSA_PKCS1_V1_5_SHA_256"|"RSASSA_PKCS1_V1_5_SHA_384"|"RSASSA_PKCS1_V1_5_SHA_512"|"ECDSA_SHA_256"|"ECDSA_SHA_384"|"ECDSA_SHA_512"|string;
+  export type SigningAlgorithmSpec = "RSASSA_PSS_SHA_256"|"RSASSA_PSS_SHA_384"|"RSASSA_PSS_SHA_512"|"RSASSA_PKCS1_V1_5_SHA_256"|"RSASSA_PKCS1_V1_5_SHA_384"|"RSASSA_PKCS1_V1_5_SHA_512"|"ECDSA_SHA_256"|"ECDSA_SHA_384"|"ECDSA_SHA_512"|"SM2DSA"|string;
   export type SigningAlgorithmSpecList = SigningAlgorithmSpec[];
   export interface Tag {
     /**