cdk-comprehend-s3olap 2.0.237 → 2.0.239

package/node_modules/aws-sdk/clients/backup.d.ts

@@ -59,6 +59,14 @@ declare class Backup extends Service {
    * This action creates a legal hold on a recovery point (backup). A legal hold is a restraint on altering or deleting a backup until an authorized user cancels the legal hold. Any actions to delete or disassociate a recovery point will fail with an error if one or more active legal holds are on the recovery point.
    */
   createLegalHold(callback?: (err: AWSError, data: Backup.Types.CreateLegalHoldOutput) => void): Request<Backup.Types.CreateLegalHoldOutput, AWSError>;
+  /**
+   * This request creates a logical container where backups are stored. This request includes a name, optionally one or more resource tags, an encryption key, and a request ID.  Do not include sensitive data, such as passport numbers, in the name of a backup vault. 
+   */
+  createLogicallyAirGappedBackupVault(params: Backup.Types.CreateLogicallyAirGappedBackupVaultInput, callback?: (err: AWSError, data: Backup.Types.CreateLogicallyAirGappedBackupVaultOutput) => void): Request<Backup.Types.CreateLogicallyAirGappedBackupVaultOutput, AWSError>;
+  /**
+   * This request creates a logical container where backups are stored. This request includes a name, optionally one or more resource tags, an encryption key, and a request ID.  Do not include sensitive data, such as passport numbers, in the name of a backup vault. 
+   */
+  createLogicallyAirGappedBackupVault(callback?: (err: AWSError, data: Backup.Types.CreateLogicallyAirGappedBackupVaultOutput) => void): Request<Backup.Types.CreateLogicallyAirGappedBackupVaultOutput, AWSError>;
   /**
    * Creates a report plan. A report plan is a document that contains information about the contents of the report and where Backup will deliver it. If you call CreateReportPlan with a plan that already exists, you receive an AlreadyExistsException exception.
    */
@@ -399,6 +407,14 @@ declare class Backup extends Service {
    * Returns an array of resources successfully backed up by Backup, including the time the resource was saved, an Amazon Resource Name (ARN) of the resource, and a resource type.
    */
   listProtectedResources(callback?: (err: AWSError, data: Backup.Types.ListProtectedResourcesOutput) => void): Request<Backup.Types.ListProtectedResourcesOutput, AWSError>;
+  /**
+   * This request lists the protected resources corresponding to each backup vault.
+   */
+  listProtectedResourcesByBackupVault(params: Backup.Types.ListProtectedResourcesByBackupVaultInput, callback?: (err: AWSError, data: Backup.Types.ListProtectedResourcesByBackupVaultOutput) => void): Request<Backup.Types.ListProtectedResourcesByBackupVaultOutput, AWSError>;
+  /**
+   * This request lists the protected resources corresponding to each backup vault.
+   */
+  listProtectedResourcesByBackupVault(callback?: (err: AWSError, data: Backup.Types.ListProtectedResourcesByBackupVaultOutput) => void): Request<Backup.Types.ListProtectedResourcesByBackupVaultOutput, AWSError>;
   /**
    * Returns detailed information about the recovery points stored in a backup vault.
    */
@@ -632,7 +648,7 @@ declare namespace Backup {
      */
     CompletionDate?: timestamp;
     /**
-     * The current state of a resource recovery point.
+     * The current state of a backup job.
      */
     State?: BackupJobState;
     /**
@@ -834,7 +850,7 @@ declare namespace Backup {
      */
     ScheduleExpression?: CronExpression;
     /**
-     * A value in minutes after a backup is scheduled before a job will be canceled if it doesn't start successfully. This value is optional. If this value is included, it must be at least 60 minutes to avoid errors. During the start window, the backup job status remains in CREATED status until it has successfully begun or until the start window time has run out. If within the start window time Backup receives an error that allows the job to be retried, Backup will automatically retry to begin the job at least every 10 minutes until the backup successfully begins (the job status changes to RUNNING) or until the job status changes to EXPIRED (which is expected to occur when the start window time is over).
+     * A value in minutes after a backup is scheduled before a job will be canceled if it doesn't start successfully. This value is optional. If this value is included, it must be at least 60 minutes to avoid errors. This parameter has a maximum value of 100 years (52,560,000 minutes). During the start window, the backup job status remains in CREATED status until it has successfully begun or until the start window time has run out. If within the start window time Backup receives an error that allows the job to be retried, Backup will automatically retry to begin the job at least every 10 minutes until the backup successfully begins (the job status changes to RUNNING) or until the job status changes to EXPIRED (which is expected to occur when the start window time is over).
      */
     StartWindowMinutes?: WindowMinutes;
     /**
@@ -842,7 +858,7 @@ declare namespace Backup {
      */
     CompletionWindowMinutes?: WindowMinutes;
     /**
-     * The lifecycle defines when a protected resource is transitioned to cold storage and when it expires. Backup will transition and expire backups automatically according to the lifecycle that you define.  Backups transitioned to cold storage must be stored in cold storage for a minimum of 90 days. Therefore, the “retention” setting must be 90 days greater than the “transition to cold after days” setting. The “transition to cold after days” setting cannot be changed after a backup has been transitioned to cold. Resource types that are able to be transitioned to cold storage are listed in the "Lifecycle to cold storage" section of the  Feature availability by resource table. Backup ignores this expression for other resource types.
+     * The lifecycle defines when a protected resource is transitioned to cold storage and when it expires. Backup will transition and expire backups automatically according to the lifecycle that you define.  Backups transitioned to cold storage must be stored in cold storage for a minimum of 90 days. Therefore, the “retention” setting must be 90 days greater than the “transition to cold after days” setting. The “transition to cold after days” setting cannot be changed after a backup has been transitioned to cold. Resource types that are able to be transitioned to cold storage are listed in the "Lifecycle to cold storage" section of the  Feature availability by resource table. Backup ignores this expression for other resource types. This parameter has a maximum value of 100 years (36,500 days).
      */
     Lifecycle?: Lifecycle;
     /**
@@ -1335,6 +1351,46 @@ declare namespace Backup {
      */
     RecoveryPointSelection?: RecoveryPointSelection;
   }
+  export interface CreateLogicallyAirGappedBackupVaultInput {
+    /**
+     * This is the name of the vault that is being created.
+     */
+    BackupVaultName: BackupVaultName;
+    /**
+     * These are the tags that will be included in the newly-created vault.
+     */
+    BackupVaultTags?: Tags;
+    /**
+     * This is the ID of the creation request.
+     */
+    CreatorRequestId?: string;
+    /**
+     * This setting specifies the minimum retention period that the vault retains its recovery points. If this parameter is not specified, no minimum retention period is enforced. If specified, any backup or copy job to the vault must have a lifecycle policy with a retention period equal to or longer than the minimum retention period. If a job retention period is shorter than that minimum retention period, then the vault fails the backup or copy job, and you should either modify your lifecycle settings or use a different vault.
+     */
+    MinRetentionDays: Long;
+    /**
+     * This is the setting that specifies the maximum retention period that the vault retains its recovery points. If this parameter is not specified, Backup does not enforce a maximum retention period on the recovery points in the vault (allowing indefinite storage). If specified, any backup or copy job to the vault must have a lifecycle policy with a retention period equal to or shorter than the maximum retention period. If the job retention period is longer than that maximum retention period, then the vault fails the backup or copy job, and you should either modify your lifecycle settings or use a different vault.
+     */
+    MaxRetentionDays: Long;
+  }
+  export interface CreateLogicallyAirGappedBackupVaultOutput {
+    /**
+     * The name of a logical container where backups are stored. Logically air-gapped backup vaults are identified by names that are unique to the account used to create them and the Region where they are created. They consist of lowercase letters, numbers, and hyphens.
+     */
+    BackupVaultName?: BackupVaultName;
+    /**
+     * This is the ARN (Amazon Resource Name) of the vault being created.
+     */
+    BackupVaultArn?: ARN;
+    /**
+     * The date and time when the vault was created. This value is in Unix format, Coordinated Universal Time (UTC), and accurate to milliseconds. For example, the value 1516925490.087 represents Friday, January 26, 2018 12:11:30.087 AM.
+     */
+    CreationDate?: timestamp;
+    /**
+     * This is the current state of the vault.
+     */
+    VaultState?: VaultState;
+  }
   export interface CreateReportPlanInput {
     /**
      * The unique name of the report plan. The name must be between 1 and 256 characters, starting with a letter, and consisting of letters (a-z, A-Z), numbers (0-9), and underscores (_).
@@ -1506,7 +1562,7 @@ declare namespace Backup {
      */
     CompletionDate?: timestamp;
     /**
-     * The current state of a resource recovery point.
+     * The current state of a backup job.
      */
     State?: BackupJobState;
     /**
@@ -1579,6 +1635,10 @@ declare namespace Backup {
      * The name of a logical container where backups are stored. Backup vaults are identified by names that are unique to the account used to create them and the Amazon Web Services Region where they are created. They consist of lowercase letters, numbers, and hyphens.
      */
     BackupVaultName: string;
+    /**
+     * This is the account ID of the specified backup vault.
+     */
+    BackupVaultAccountId?: string;
   }
   export interface DescribeBackupVaultOutput {
     /**
@@ -1589,6 +1649,10 @@ declare namespace Backup {
      * An Amazon Resource Name (ARN) that uniquely identifies a backup vault; for example, arn:aws:backup:us-east-1:123456789012:vault:aBackupVault.
      */
     BackupVaultArn?: ARN;
+    /**
+     * This is the type of vault described.
+     */
+    VaultType?: VaultType;
     /**
      * The server-side encryption key that is used to protect your backups; for example, arn:aws:kms:us-west-2:111122223333:key/1234abcd-12ab-34cd-56ef-1234567890ab.
      */
@@ -1719,6 +1783,10 @@ declare namespace Backup {
      * An Amazon Resource Name (ARN) that uniquely identifies a recovery point; for example, arn:aws:backup:us-east-1:123456789012:recovery-point:1EB3B5E7-9EB0-435A-A80B-108B488B0D45.
      */
     RecoveryPointArn: ARN;
+    /**
+     * This is the account ID of the specified backup vault.
+     */
+    BackupVaultAccountId?: AccountId;
   }
   export interface DescribeRecoveryPointOutput {
     /**
@@ -2192,6 +2260,10 @@ declare namespace Backup {
      * An Amazon Resource Name (ARN) that uniquely identifies a recovery point; for example, arn:aws:backup:us-east-1:123456789012:recovery-point:1EB3B5E7-9EB0-435A-A80B-108B488B0D45.
      */
     RecoveryPointArn: ARN;
+    /**
+     * This is the account ID of the specified backup vault.
+     */
+    BackupVaultAccountId?: AccountId;
   }
   export interface GetRecoveryPointRestoreMetadataOutput {
     /**
@@ -2414,6 +2486,14 @@ declare namespace Backup {
     BackupSelectionsList?: BackupSelectionsList;
   }
   export interface ListBackupVaultsInput {
+    /**
+     * This parameter will sort the list of vaults by vault type.
+     */
+    ByVaultType?: VaultType;
+    /**
+     * This parameter will sort the list of vaults by shared vaults.
+     */
+    ByShared?: boolean;
     /**
      * The next item following a partial list of returned items. For example, if a request is made to return maxResults number of items, NextToken allows you to return more items in your list starting at the location pointed to by the next token.
      */
@@ -2534,6 +2614,34 @@ declare namespace Backup {
     LegalHolds?: LegalHoldsList;
   }
   export type ListOfTags = Condition[];
+  export interface ListProtectedResourcesByBackupVaultInput {
+    /**
+     * This is the list of protected resources by backup vault within the vault(s) you specify by name.
+     */
+    BackupVaultName: BackupVaultName;
+    /**
+     * This is the list of protected resources by backup vault within the vault(s) you specify by account ID.
+     */
+    BackupVaultAccountId?: AccountId;
+    /**
+     * The next item following a partial list of returned items. For example, if a request is made to return maxResults number of items, NextToken allows you to return more items in your list starting at the location pointed to by the next token.
+     */
+    NextToken?: string;
+    /**
+     * The maximum number of items to be returned.
+     */
+    MaxResults?: MaxResults;
+  }
+  export interface ListProtectedResourcesByBackupVaultOutput {
+    /**
+     * These are the results returned for the request ListProtectedResourcesByBackupVault.
+     */
+    Results?: ProtectedResourcesList;
+    /**
+     * The next item following a partial list of returned items. For example, if a request is made to return maxResults number of items, NextToken allows you to return more items in your list starting at the location pointed to by the next token.
+     */
+    NextToken?: string;
+  }
   export interface ListProtectedResourcesInput {
     /**
      * The next item following a partial list of returned items. For example, if a request is made to return maxResults number of items, NextToken allows you to return more items in your list starting at the location pointed to by the next token.
@@ -2559,6 +2667,10 @@ declare namespace Backup {
      * The name of a logical container where backups are stored. Backup vaults are identified by names that are unique to the account used to create them and the Amazon Web Services Region where they are created. They consist of lowercase letters, numbers, and hyphens.  Backup vault name might not be available when a supported service creates the backup. 
      */
     BackupVaultName: BackupVaultName;
+    /**
+     * This parameter will sort the list of recovery points by account ID.
+     */
+    BackupVaultAccountId?: AccountId;
     /**
      * The next item following a partial list of returned items. For example, if a request is made to return maxResults number of items, NextToken allows you to return more items in your list starting at the location pointed to by the next token.
      */
@@ -3235,15 +3347,15 @@ declare namespace Backup {
      */
     IdempotencyToken?: string;
     /**
-     * A value in minutes after a backup is scheduled before a job will be canceled if it doesn't start successfully. This value is optional, and the default is 8 hours. If this value is included, it must be at least 60 minutes to avoid errors. During the start window, the backup job status remains in CREATED status until it has successfully begun or until the start window time has run out. If within the start window time Backup receives an error that allows the job to be retried, Backup will automatically retry to begin the job at least every 10 minutes until the backup successfully begins (the job status changes to RUNNING) or until the job status changes to EXPIRED (which is expected to occur when the start window time is over).
+     * A value in minutes after a backup is scheduled before a job will be canceled if it doesn't start successfully. This value is optional, and the default is 8 hours. If this value is included, it must be at least 60 minutes to avoid errors. This parameter has a maximum value of 100 years (52,560,000 minutes). During the start window, the backup job status remains in CREATED status until it has successfully begun or until the start window time has run out. If within the start window time Backup receives an error that allows the job to be retried, Backup will automatically retry to begin the job at least every 10 minutes until the backup successfully begins (the job status changes to RUNNING) or until the job status changes to EXPIRED (which is expected to occur when the start window time is over).
      */
     StartWindowMinutes?: WindowMinutes;
     /**
-     * A value in minutes during which a successfully started backup must complete, or else Backup will cancel the job. This value is optional. This value begins counting down from when the backup was scheduled. It does not add additional time for StartWindowMinutes, or if the backup started later than scheduled.
+     * A value in minutes during which a successfully started backup must complete, or else Backup will cancel the job. This value is optional. This value begins counting down from when the backup was scheduled. It does not add additional time for StartWindowMinutes, or if the backup started later than scheduled. Like StartWindowMinutes, this parameter has a maximum value of 100 years (52,560,000 minutes).
      */
     CompleteWindowMinutes?: WindowMinutes;
     /**
-     * The lifecycle defines when a protected resource is transitioned to cold storage and when it expires. Backup will transition and expire backups automatically according to the lifecycle that you define.  Backups transitioned to cold storage must be stored in cold storage for a minimum of 90 days. Therefore, the “retention” setting must be 90 days greater than the “transition to cold after days” setting. The “transition to cold after days” setting cannot be changed after a backup has been transitioned to cold.  Resource types that are able to be transitioned to cold storage are listed in the "Lifecycle to cold storage" section of the  Feature availability by resource table. Backup ignores this expression for other resource types.
+     * The lifecycle defines when a protected resource is transitioned to cold storage and when it expires. Backup will transition and expire backups automatically according to the lifecycle that you define.  Backups transitioned to cold storage must be stored in cold storage for a minimum of 90 days. Therefore, the “retention” setting must be 90 days greater than the “transition to cold after days” setting. The “transition to cold after days” setting cannot be changed after a backup has been transitioned to cold.  Resource types that are able to be transitioned to cold storage are listed in the "Lifecycle to cold storage" section of the  Feature availability by resource table. Backup ignores this expression for other resource types. This parameter has a maximum value of 100 years (36,500 days).
      */
     Lifecycle?: Lifecycle;
     /**
@@ -3538,6 +3650,8 @@ declare namespace Backup {
     CreationTime?: timestamp;
   }
   export type VaultNames = string[];
+  export type VaultState = "CREATING"|"AVAILABLE"|"FAILED"|string;
+  export type VaultType = "BACKUP_VAULT"|"LOGICALLY_AIR_GAPPED_BACKUP_VAULT"|string;
   export type WindowMinutes = number;
   export type integer = number;
   export type long = number;

package/node_modules/aws-sdk/clients/elasticache.d.ts

@@ -532,6 +532,14 @@ declare class ElastiCache extends Service {
    * Represents the input of a TestFailover operation which test automatic failover on a specified node group (called shard in the console) in a replication group (called cluster in the console). This API is designed for testing the behavior of your application in case of ElastiCache failover. It is not designed to be an operational tool for initiating a failover to overcome a problem you may have with the cluster. Moreover, in certain conditions such as large-scale operational events, Amazon may block this API.   Note the following    A customer can use this operation to test automatic failover on up to 5 shards (called node groups in the ElastiCache API and Amazon CLI) in any rolling 24-hour period.   If calling this operation on shards in different clusters (called replication groups in the API and CLI), the calls can be made concurrently.     If calling this operation multiple times on different shards in the same Redis (cluster mode enabled) replication group, the first node replacement must complete before a subsequent call can be made.   To determine whether the node replacement is complete you can check Events using the Amazon ElastiCache console, the Amazon CLI, or the ElastiCache API. Look for the following automatic failover related events, listed here in order of occurrance:   Replication group message: Test Failover API called for node group <node-group-id>    Cache cluster message: Failover from primary node <primary-node-id> to replica node <node-id> completed    Replication group message: Failover from primary node <primary-node-id> to replica node <node-id> completed    Cache cluster message: Recovering cache nodes <node-id>    Cache cluster message: Finished recovery for cache nodes <node-id>    For more information see:    Viewing ElastiCache Events in the ElastiCache User Guide     DescribeEvents in the ElastiCache API Reference     Also see, Testing Multi-AZ  in the ElastiCache User Guide.
    */
   testFailover(callback?: (err: AWSError, data: ElastiCache.Types.TestFailoverResult) => void): Request<ElastiCache.Types.TestFailoverResult, AWSError>;
+  /**
+   *  Async API to test connection between source and target replication group. 
+   */
+  testMigration(params: ElastiCache.Types.TestMigrationMessage, callback?: (err: AWSError, data: ElastiCache.Types.TestMigrationResponse) => void): Request<ElastiCache.Types.TestMigrationResponse, AWSError>;
+  /**
+   *  Async API to test connection between source and target replication group. 
+   */
+  testMigration(callback?: (err: AWSError, data: ElastiCache.Types.TestMigrationResponse) => void): Request<ElastiCache.Types.TestMigrationResponse, AWSError>;
   /**
    * Waits for the cacheClusterAvailable state by periodically calling the underlying ElastiCache.describeCacheClustersoperation every 15 seconds (at most 40 times). Wait until ElastiCache cluster is available.
    */
@@ -2413,7 +2421,7 @@ declare namespace ElastiCache {
      */
     GlobalReplicationGroupId: String;
     /**
-     * The number of node groups you wish to add
+     * Total number of node groups you want
      */
     NodeGroupCount: Integer;
     /**
@@ -3872,6 +3880,19 @@ declare namespace ElastiCache {
   export interface TestFailoverResult {
     ReplicationGroup?: ReplicationGroup;
   }
+  export interface TestMigrationMessage {
+    /**
+     *  The ID of the replication group to which data is to be migrated. 
+     */
+    ReplicationGroupId: String;
+    /**
+     *  List of endpoints from which data should be migrated. List should have only one element. 
+     */
+    CustomerNodeEndpointList: CustomerNodeEndpointList;
+  }
+  export interface TestMigrationResponse {
+    ReplicationGroup?: ReplicationGroup;
+  }
   export interface TimeRangeFilter {
     /**
      * The start time of the time range filter

package/node_modules/aws-sdk/clients/ivsrealtime.d.ts

@@ -212,7 +212,7 @@ declare namespace IVSRealTime {
   }
   export interface Event {
     /**
-     * If the event is an error event, the error code is provided to give insight into the specific error that occurred. If the event is not an error event, this field is null. INSUFFICIENT_CAPABILITIES indicates that the participant tried to take an action that the participant’s token is not allowed to do. For more information about participant capabilities, see the capabilities field in CreateParticipantToken.
+     * If the event is an error event, the error code is provided to give insight into the specific error that occurred. If the event is not an error event, this field is null. INSUFFICIENT_CAPABILITIES indicates that the participant tried to take an action that the participant’s token is not allowed to do. For more information about participant capabilities, see the capabilities field in CreateParticipantToken. QUOTA_EXCEEDED indicates that the number of participants who want to publish/subscribe to a stage exceeds the quota; for more information, see Service Quotas. PUBLISHER_NOT_FOUND indicates that the participant tried to subscribe to a publisher that doesn’t exist. 
      */
     errorCode?: EventErrorCode;
     /**
@@ -232,7 +232,7 @@ declare namespace IVSRealTime {
      */
     remoteParticipantId?: ParticipantId;
   }
-  export type EventErrorCode = "INSUFFICIENT_CAPABILITIES"|string;
+  export type EventErrorCode = "INSUFFICIENT_CAPABILITIES"|"QUOTA_EXCEEDED"|"PUBLISHER_NOT_FOUND"|string;
   export type EventList = Event[];
   export type EventName = "JOINED"|"LEFT"|"PUBLISH_STARTED"|"PUBLISH_STOPPED"|"SUBSCRIBE_STARTED"|"SUBSCRIBE_STOPPED"|"PUBLISH_ERROR"|"SUBSCRIBE_ERROR"|"JOIN_ERROR"|string;
   export interface GetParticipantRequest {

package/node_modules/aws-sdk/clients/kinesisvideo.d.ts

@@ -220,11 +220,11 @@ declare class KinesisVideo extends Service {
    */
   updateImageGenerationConfiguration(callback?: (err: AWSError, data: KinesisVideo.Types.UpdateImageGenerationConfigurationOutput) => void): Request<KinesisVideo.Types.UpdateImageGenerationConfigurationOutput, AWSError>;
   /**
-   * Associates a SignalingChannel to a stream to store the media. There are two signaling modes that can specified :   If the StorageStatus is disabled, no data will be stored, and the StreamARN parameter will not be needed.    If the StorageStatus is enabled, the data will be stored in the StreamARN provided.   
+   * Associates a SignalingChannel to a stream to store the media. There are two signaling modes that can specified :   If the StorageStatus is disabled, no data will be stored, and the StreamARN parameter will not be needed.    If the StorageStatus is enabled, the data will be stored in the StreamARN provided.     If StorageStatus is enabled, direct peer-to-peer (master-viewer) connections no longer occur. Peers connect directly to the storage session. You must call the JoinStorageSession API to trigger an SDP offer send and establish a connection between a peer and the storage session.  
    */
   updateMediaStorageConfiguration(params: KinesisVideo.Types.UpdateMediaStorageConfigurationInput, callback?: (err: AWSError, data: KinesisVideo.Types.UpdateMediaStorageConfigurationOutput) => void): Request<KinesisVideo.Types.UpdateMediaStorageConfigurationOutput, AWSError>;
   /**
-   * Associates a SignalingChannel to a stream to store the media. There are two signaling modes that can specified :   If the StorageStatus is disabled, no data will be stored, and the StreamARN parameter will not be needed.    If the StorageStatus is enabled, the data will be stored in the StreamARN provided.   
+   * Associates a SignalingChannel to a stream to store the media. There are two signaling modes that can specified :   If the StorageStatus is disabled, no data will be stored, and the StreamARN parameter will not be needed.    If the StorageStatus is enabled, the data will be stored in the StreamARN provided.     If StorageStatus is enabled, direct peer-to-peer (master-viewer) connections no longer occur. Peers connect directly to the storage session. You must call the JoinStorageSession API to trigger an SDP offer send and establish a connection between a peer and the storage session.  
    */
   updateMediaStorageConfiguration(callback?: (err: AWSError, data: KinesisVideo.Types.UpdateMediaStorageConfigurationOutput) => void): Request<KinesisVideo.Types.UpdateMediaStorageConfigurationOutput, AWSError>;
   /**

package/node_modules/aws-sdk/clients/kinesisvideoarchivedmedia.d.ts

@@ -13,27 +13,27 @@ declare class KinesisVideoArchivedMedia extends Service {
   constructor(options?: KinesisVideoArchivedMedia.Types.ClientConfiguration)
   config: Config & KinesisVideoArchivedMedia.Types.ClientConfiguration;
   /**
-   * Downloads an MP4 file (clip) containing the archived, on-demand media from the specified video stream over the specified time range.  Both the StreamName and the StreamARN parameters are optional, but you must specify either the StreamName or the StreamARN when invoking this API operation.  As a prerequisite to using GetCLip API, you must obtain an endpoint using GetDataEndpoint, specifying GET_CLIP for the APIName parameter.  An Amazon Kinesis video stream has the following requirements for providing data through MP4:   The media must contain h.264 or h.265 encoded video and, optionally, AAC or G.711 encoded audio. Specifically, the codec ID of track 1 should be V_MPEG/ISO/AVC (for h.264) or V_MPEGH/ISO/HEVC (for H.265). Optionally, the codec ID of track 2 should be A_AAC (for AAC) or A_MS/ACM (for G.711).   Data retention must be greater than 0.   The video track of each fragment must contain codec private data in the Advanced Video Coding (AVC) for H.264 format and HEVC for H.265 format. For more information, see MPEG-4 specification ISO/IEC 14496-15. For information about adapting stream data to a given format, see NAL Adaptation Flags.   The audio track (if present) of each fragment must contain codec private data in the AAC format (AAC specification ISO/IEC 13818-7) or the MS Wave format.   You can monitor the amount of outgoing data by monitoring the GetClip.OutgoingBytes Amazon CloudWatch metric. For information about using CloudWatch to monitor Kinesis Video Streams, see Monitoring Kinesis Video Streams. For pricing information, see Amazon Kinesis Video Streams Pricing and AWS Pricing. Charges for outgoing AWS data apply.
+   * Downloads an MP4 file (clip) containing the archived, on-demand media from the specified video stream over the specified time range.  Both the StreamName and the StreamARN parameters are optional, but you must specify either the StreamName or the StreamARN when invoking this API operation.  As a prerequisite to using GetCLip API, you must obtain an endpoint using GetDataEndpoint, specifying GET_CLIP for the APIName parameter.  An Amazon Kinesis video stream has the following requirements for providing data through MP4:   The media must contain h.264 or h.265 encoded video and, optionally, AAC or G.711 encoded audio. Specifically, the codec ID of track 1 should be V_MPEG/ISO/AVC (for h.264) or V_MPEGH/ISO/HEVC (for H.265). Optionally, the codec ID of track 2 should be A_AAC (for AAC) or A_MS/ACM (for G.711).   Data retention must be greater than 0.   The video track of each fragment must contain codec private data in the Advanced Video Coding (AVC) for H.264 format and HEVC for H.265 format. For more information, see MPEG-4 specification ISO/IEC 14496-15. For information about adapting stream data to a given format, see NAL Adaptation Flags.   The audio track (if present) of each fragment must contain codec private data in the AAC format (AAC specification ISO/IEC 13818-7) or the MS Wave format.   You can monitor the amount of outgoing data by monitoring the GetClip.OutgoingBytes Amazon CloudWatch metric. For information about using CloudWatch to monitor Kinesis Video Streams, see Monitoring Kinesis Video Streams. For pricing information, see Amazon Kinesis Video Streams Pricing and  Amazon Web Services Pricing. Charges for outgoing Amazon Web Services data apply.
    */
   getClip(params: KinesisVideoArchivedMedia.Types.GetClipInput, callback?: (err: AWSError, data: KinesisVideoArchivedMedia.Types.GetClipOutput) => void): Request<KinesisVideoArchivedMedia.Types.GetClipOutput, AWSError>;
   /**
-   * Downloads an MP4 file (clip) containing the archived, on-demand media from the specified video stream over the specified time range.  Both the StreamName and the StreamARN parameters are optional, but you must specify either the StreamName or the StreamARN when invoking this API operation.  As a prerequisite to using GetCLip API, you must obtain an endpoint using GetDataEndpoint, specifying GET_CLIP for the APIName parameter.  An Amazon Kinesis video stream has the following requirements for providing data through MP4:   The media must contain h.264 or h.265 encoded video and, optionally, AAC or G.711 encoded audio. Specifically, the codec ID of track 1 should be V_MPEG/ISO/AVC (for h.264) or V_MPEGH/ISO/HEVC (for H.265). Optionally, the codec ID of track 2 should be A_AAC (for AAC) or A_MS/ACM (for G.711).   Data retention must be greater than 0.   The video track of each fragment must contain codec private data in the Advanced Video Coding (AVC) for H.264 format and HEVC for H.265 format. For more information, see MPEG-4 specification ISO/IEC 14496-15. For information about adapting stream data to a given format, see NAL Adaptation Flags.   The audio track (if present) of each fragment must contain codec private data in the AAC format (AAC specification ISO/IEC 13818-7) or the MS Wave format.   You can monitor the amount of outgoing data by monitoring the GetClip.OutgoingBytes Amazon CloudWatch metric. For information about using CloudWatch to monitor Kinesis Video Streams, see Monitoring Kinesis Video Streams. For pricing information, see Amazon Kinesis Video Streams Pricing and AWS Pricing. Charges for outgoing AWS data apply.
+   * Downloads an MP4 file (clip) containing the archived, on-demand media from the specified video stream over the specified time range.  Both the StreamName and the StreamARN parameters are optional, but you must specify either the StreamName or the StreamARN when invoking this API operation.  As a prerequisite to using GetCLip API, you must obtain an endpoint using GetDataEndpoint, specifying GET_CLIP for the APIName parameter.  An Amazon Kinesis video stream has the following requirements for providing data through MP4:   The media must contain h.264 or h.265 encoded video and, optionally, AAC or G.711 encoded audio. Specifically, the codec ID of track 1 should be V_MPEG/ISO/AVC (for h.264) or V_MPEGH/ISO/HEVC (for H.265). Optionally, the codec ID of track 2 should be A_AAC (for AAC) or A_MS/ACM (for G.711).   Data retention must be greater than 0.   The video track of each fragment must contain codec private data in the Advanced Video Coding (AVC) for H.264 format and HEVC for H.265 format. For more information, see MPEG-4 specification ISO/IEC 14496-15. For information about adapting stream data to a given format, see NAL Adaptation Flags.   The audio track (if present) of each fragment must contain codec private data in the AAC format (AAC specification ISO/IEC 13818-7) or the MS Wave format.   You can monitor the amount of outgoing data by monitoring the GetClip.OutgoingBytes Amazon CloudWatch metric. For information about using CloudWatch to monitor Kinesis Video Streams, see Monitoring Kinesis Video Streams. For pricing information, see Amazon Kinesis Video Streams Pricing and  Amazon Web Services Pricing. Charges for outgoing Amazon Web Services data apply.
    */
   getClip(callback?: (err: AWSError, data: KinesisVideoArchivedMedia.Types.GetClipOutput) => void): Request<KinesisVideoArchivedMedia.Types.GetClipOutput, AWSError>;
   /**
-   * Retrieves an MPEG Dynamic Adaptive Streaming over HTTP (DASH) URL for the stream. You can then open the URL in a media player to view the stream contents. Both the StreamName and the StreamARN parameters are optional, but you must specify either the StreamName or the StreamARN when invoking this API operation. An Amazon Kinesis video stream has the following requirements for providing data through MPEG-DASH:   The media must contain h.264 or h.265 encoded video and, optionally, AAC or G.711 encoded audio. Specifically, the codec ID of track 1 should be V_MPEG/ISO/AVC (for h.264) or V_MPEGH/ISO/HEVC (for H.265). Optionally, the codec ID of track 2 should be A_AAC (for AAC) or A_MS/ACM (for G.711).   Data retention must be greater than 0.   The video track of each fragment must contain codec private data in the Advanced Video Coding (AVC) for H.264 format and HEVC for H.265 format. For more information, see MPEG-4 specification ISO/IEC 14496-15. For information about adapting stream data to a given format, see NAL Adaptation Flags.   The audio track (if present) of each fragment must contain codec private data in the AAC format (AAC specification ISO/IEC 13818-7) or the MS Wave format.   The following procedure shows how to use MPEG-DASH with Kinesis Video Streams:   Get an endpoint using GetDataEndpoint, specifying GET_DASH_STREAMING_SESSION_URL for the APIName parameter.   Retrieve the MPEG-DASH URL using GetDASHStreamingSessionURL. Kinesis Video Streams creates an MPEG-DASH streaming session to be used for accessing content in a stream using the MPEG-DASH protocol. GetDASHStreamingSessionURL returns an authenticated URL (that includes an encrypted session token) for the session's MPEG-DASH manifest (the root resource needed for streaming with MPEG-DASH).  Don't share or store this token where an unauthorized entity can access it. The token provides access to the content of the stream. Safeguard the token with the same measures that you use with your AWS credentials.  The media that is made available through the manifest consists only of the requested stream, time range, and format. No other media data (such as frames outside the requested window or alternate bitrates) is made available.   Provide the URL (containing the encrypted session token) for the MPEG-DASH manifest to a media player that supports the MPEG-DASH protocol. Kinesis Video Streams makes the initialization fragment and media fragments available through the manifest URL. The initialization fragment contains the codec private data for the stream, and other data needed to set up the video or audio decoder and renderer. The media fragments contain encoded video frames or encoded audio samples.   The media player receives the authenticated URL and requests stream metadata and media data normally. When the media player requests data, it calls the following actions:    GetDASHManifest: Retrieves an MPEG DASH manifest, which contains the metadata for the media that you want to playback.    GetMP4InitFragment: Retrieves the MP4 initialization fragment. The media player typically loads the initialization fragment before loading any media fragments. This fragment contains the "fytp" and "moov" MP4 atoms, and the child atoms that are needed to initialize the media player decoder. The initialization fragment does not correspond to a fragment in a Kinesis video stream. It contains only the codec private data for the stream and respective track, which the media player needs to decode the media frames.    GetMP4MediaFragment: Retrieves MP4 media fragments. These fragments contain the "moof" and "mdat" MP4 atoms and their child atoms, containing the encoded fragment's media frames and their timestamps.   After the first media fragment is made available in a streaming session, any fragments that don't contain the same codec private data cause an error to be returned when those different media fragments are loaded. Therefore, the codec private data should not change between fragments in a session. This also means that the session fails if the fragments in a stream change from having only video to having both audio and video.  Data retrieved with this action is billable. See Pricing for details.      For restrictions that apply to MPEG-DASH sessions, see Kinesis Video Streams Limits.  You can monitor the amount of data that the media player consumes by monitoring the GetMP4MediaFragment.OutgoingBytes Amazon CloudWatch metric. For information about using CloudWatch to monitor Kinesis Video Streams, see Monitoring Kinesis Video Streams. For pricing information, see Amazon Kinesis Video Streams Pricing and AWS Pricing. Charges for both HLS sessions and outgoing AWS data apply. For more information about HLS, see HTTP Live Streaming on the Apple Developer site.  If an error is thrown after invoking a Kinesis Video Streams archived media API, in addition to the HTTP status code and the response body, it includes the following pieces of information:     x-amz-ErrorType HTTP header – contains a more specific error type in addition to what the HTTP status code provides.     x-amz-RequestId HTTP header – if you want to report an issue to AWS, the support team can better diagnose the problem if given the Request Id.   Both the HTTP status code and the ErrorType header can be utilized to make programmatic decisions about whether errors are retry-able and under what conditions, as well as provide information on what actions the client programmer might need to take in order to successfully try again. For more information, see the Errors section at the bottom of this topic, as well as Common Errors.  
+   * Retrieves an MPEG Dynamic Adaptive Streaming over HTTP (DASH) URL for the stream. You can then open the URL in a media player to view the stream contents. Both the StreamName and the StreamARN parameters are optional, but you must specify either the StreamName or the StreamARN when invoking this API operation. An Amazon Kinesis video stream has the following requirements for providing data through MPEG-DASH:   The media must contain h.264 or h.265 encoded video and, optionally, AAC or G.711 encoded audio. Specifically, the codec ID of track 1 should be V_MPEG/ISO/AVC (for h.264) or V_MPEGH/ISO/HEVC (for H.265). Optionally, the codec ID of track 2 should be A_AAC (for AAC) or A_MS/ACM (for G.711).   Data retention must be greater than 0.   The video track of each fragment must contain codec private data in the Advanced Video Coding (AVC) for H.264 format and HEVC for H.265 format. For more information, see MPEG-4 specification ISO/IEC 14496-15. For information about adapting stream data to a given format, see NAL Adaptation Flags.   The audio track (if present) of each fragment must contain codec private data in the AAC format (AAC specification ISO/IEC 13818-7) or the MS Wave format.   The following procedure shows how to use MPEG-DASH with Kinesis Video Streams:   Get an endpoint using GetDataEndpoint, specifying GET_DASH_STREAMING_SESSION_URL for the APIName parameter.   Retrieve the MPEG-DASH URL using GetDASHStreamingSessionURL. Kinesis Video Streams creates an MPEG-DASH streaming session to be used for accessing content in a stream using the MPEG-DASH protocol. GetDASHStreamingSessionURL returns an authenticated URL (that includes an encrypted session token) for the session's MPEG-DASH manifest (the root resource needed for streaming with MPEG-DASH).  Don't share or store this token where an unauthorized entity can access it. The token provides access to the content of the stream. Safeguard the token with the same measures that you use with your Amazon Web Services credentials.  The media that is made available through the manifest consists only of the requested stream, time range, and format. No other media data (such as frames outside the requested window or alternate bitrates) is made available.   Provide the URL (containing the encrypted session token) for the MPEG-DASH manifest to a media player that supports the MPEG-DASH protocol. Kinesis Video Streams makes the initialization fragment and media fragments available through the manifest URL. The initialization fragment contains the codec private data for the stream, and other data needed to set up the video or audio decoder and renderer. The media fragments contain encoded video frames or encoded audio samples.   The media player receives the authenticated URL and requests stream metadata and media data normally. When the media player requests data, it calls the following actions:    GetDASHManifest: Retrieves an MPEG DASH manifest, which contains the metadata for the media that you want to playback.    GetMP4InitFragment: Retrieves the MP4 initialization fragment. The media player typically loads the initialization fragment before loading any media fragments. This fragment contains the "fytp" and "moov" MP4 atoms, and the child atoms that are needed to initialize the media player decoder. The initialization fragment does not correspond to a fragment in a Kinesis video stream. It contains only the codec private data for the stream and respective track, which the media player needs to decode the media frames.    GetMP4MediaFragment: Retrieves MP4 media fragments. These fragments contain the "moof" and "mdat" MP4 atoms and their child atoms, containing the encoded fragment's media frames and their timestamps.   After the first media fragment is made available in a streaming session, any fragments that don't contain the same codec private data cause an error to be returned when those different media fragments are loaded. Therefore, the codec private data should not change between fragments in a session. This also means that the session fails if the fragments in a stream change from having only video to having both audio and video.  Data retrieved with this action is billable. See Pricing for details.      For restrictions that apply to MPEG-DASH sessions, see Kinesis Video Streams Limits.  You can monitor the amount of data that the media player consumes by monitoring the GetMP4MediaFragment.OutgoingBytes Amazon CloudWatch metric. For information about using CloudWatch to monitor Kinesis Video Streams, see Monitoring Kinesis Video Streams. For pricing information, see Amazon Kinesis Video Streams Pricing and Amazon Web Services Pricing. Charges for both HLS sessions and outgoing Amazon Web Services data apply. For more information about HLS, see HTTP Live Streaming on the Apple Developer site.  If an error is thrown after invoking a Kinesis Video Streams archived media API, in addition to the HTTP status code and the response body, it includes the following pieces of information:     x-amz-ErrorType HTTP header – contains a more specific error type in addition to what the HTTP status code provides.     x-amz-RequestId HTTP header – if you want to report an issue to Amazon Web Services the support team can better diagnose the problem if given the Request Id.   Both the HTTP status code and the ErrorType header can be utilized to make programmatic decisions about whether errors are retry-able and under what conditions, as well as provide information on what actions the client programmer might need to take in order to successfully try again. For more information, see the Errors section at the bottom of this topic, as well as Common Errors.  
    */
   getDASHStreamingSessionURL(params: KinesisVideoArchivedMedia.Types.GetDASHStreamingSessionURLInput, callback?: (err: AWSError, data: KinesisVideoArchivedMedia.Types.GetDASHStreamingSessionURLOutput) => void): Request<KinesisVideoArchivedMedia.Types.GetDASHStreamingSessionURLOutput, AWSError>;
   /**
-   * Retrieves an MPEG Dynamic Adaptive Streaming over HTTP (DASH) URL for the stream. You can then open the URL in a media player to view the stream contents. Both the StreamName and the StreamARN parameters are optional, but you must specify either the StreamName or the StreamARN when invoking this API operation. An Amazon Kinesis video stream has the following requirements for providing data through MPEG-DASH:   The media must contain h.264 or h.265 encoded video and, optionally, AAC or G.711 encoded audio. Specifically, the codec ID of track 1 should be V_MPEG/ISO/AVC (for h.264) or V_MPEGH/ISO/HEVC (for H.265). Optionally, the codec ID of track 2 should be A_AAC (for AAC) or A_MS/ACM (for G.711).   Data retention must be greater than 0.   The video track of each fragment must contain codec private data in the Advanced Video Coding (AVC) for H.264 format and HEVC for H.265 format. For more information, see MPEG-4 specification ISO/IEC 14496-15. For information about adapting stream data to a given format, see NAL Adaptation Flags.   The audio track (if present) of each fragment must contain codec private data in the AAC format (AAC specification ISO/IEC 13818-7) or the MS Wave format.   The following procedure shows how to use MPEG-DASH with Kinesis Video Streams:   Get an endpoint using GetDataEndpoint, specifying GET_DASH_STREAMING_SESSION_URL for the APIName parameter.   Retrieve the MPEG-DASH URL using GetDASHStreamingSessionURL. Kinesis Video Streams creates an MPEG-DASH streaming session to be used for accessing content in a stream using the MPEG-DASH protocol. GetDASHStreamingSessionURL returns an authenticated URL (that includes an encrypted session token) for the session's MPEG-DASH manifest (the root resource needed for streaming with MPEG-DASH).  Don't share or store this token where an unauthorized entity can access it. The token provides access to the content of the stream. Safeguard the token with the same measures that you use with your AWS credentials.  The media that is made available through the manifest consists only of the requested stream, time range, and format. No other media data (such as frames outside the requested window or alternate bitrates) is made available.   Provide the URL (containing the encrypted session token) for the MPEG-DASH manifest to a media player that supports the MPEG-DASH protocol. Kinesis Video Streams makes the initialization fragment and media fragments available through the manifest URL. The initialization fragment contains the codec private data for the stream, and other data needed to set up the video or audio decoder and renderer. The media fragments contain encoded video frames or encoded audio samples.   The media player receives the authenticated URL and requests stream metadata and media data normally. When the media player requests data, it calls the following actions:    GetDASHManifest: Retrieves an MPEG DASH manifest, which contains the metadata for the media that you want to playback.    GetMP4InitFragment: Retrieves the MP4 initialization fragment. The media player typically loads the initialization fragment before loading any media fragments. This fragment contains the "fytp" and "moov" MP4 atoms, and the child atoms that are needed to initialize the media player decoder. The initialization fragment does not correspond to a fragment in a Kinesis video stream. It contains only the codec private data for the stream and respective track, which the media player needs to decode the media frames.    GetMP4MediaFragment: Retrieves MP4 media fragments. These fragments contain the "moof" and "mdat" MP4 atoms and their child atoms, containing the encoded fragment's media frames and their timestamps.   After the first media fragment is made available in a streaming session, any fragments that don't contain the same codec private data cause an error to be returned when those different media fragments are loaded. Therefore, the codec private data should not change between fragments in a session. This also means that the session fails if the fragments in a stream change from having only video to having both audio and video.  Data retrieved with this action is billable. See Pricing for details.      For restrictions that apply to MPEG-DASH sessions, see Kinesis Video Streams Limits.  You can monitor the amount of data that the media player consumes by monitoring the GetMP4MediaFragment.OutgoingBytes Amazon CloudWatch metric. For information about using CloudWatch to monitor Kinesis Video Streams, see Monitoring Kinesis Video Streams. For pricing information, see Amazon Kinesis Video Streams Pricing and AWS Pricing. Charges for both HLS sessions and outgoing AWS data apply. For more information about HLS, see HTTP Live Streaming on the Apple Developer site.  If an error is thrown after invoking a Kinesis Video Streams archived media API, in addition to the HTTP status code and the response body, it includes the following pieces of information:     x-amz-ErrorType HTTP header – contains a more specific error type in addition to what the HTTP status code provides.     x-amz-RequestId HTTP header – if you want to report an issue to AWS, the support team can better diagnose the problem if given the Request Id.   Both the HTTP status code and the ErrorType header can be utilized to make programmatic decisions about whether errors are retry-able and under what conditions, as well as provide information on what actions the client programmer might need to take in order to successfully try again. For more information, see the Errors section at the bottom of this topic, as well as Common Errors.  
+   * Retrieves an MPEG Dynamic Adaptive Streaming over HTTP (DASH) URL for the stream. You can then open the URL in a media player to view the stream contents. Both the StreamName and the StreamARN parameters are optional, but you must specify either the StreamName or the StreamARN when invoking this API operation. An Amazon Kinesis video stream has the following requirements for providing data through MPEG-DASH:   The media must contain h.264 or h.265 encoded video and, optionally, AAC or G.711 encoded audio. Specifically, the codec ID of track 1 should be V_MPEG/ISO/AVC (for h.264) or V_MPEGH/ISO/HEVC (for H.265). Optionally, the codec ID of track 2 should be A_AAC (for AAC) or A_MS/ACM (for G.711).   Data retention must be greater than 0.   The video track of each fragment must contain codec private data in the Advanced Video Coding (AVC) for H.264 format and HEVC for H.265 format. For more information, see MPEG-4 specification ISO/IEC 14496-15. For information about adapting stream data to a given format, see NAL Adaptation Flags.   The audio track (if present) of each fragment must contain codec private data in the AAC format (AAC specification ISO/IEC 13818-7) or the MS Wave format.   The following procedure shows how to use MPEG-DASH with Kinesis Video Streams:   Get an endpoint using GetDataEndpoint, specifying GET_DASH_STREAMING_SESSION_URL for the APIName parameter.   Retrieve the MPEG-DASH URL using GetDASHStreamingSessionURL. Kinesis Video Streams creates an MPEG-DASH streaming session to be used for accessing content in a stream using the MPEG-DASH protocol. GetDASHStreamingSessionURL returns an authenticated URL (that includes an encrypted session token) for the session's MPEG-DASH manifest (the root resource needed for streaming with MPEG-DASH).  Don't share or store this token where an unauthorized entity can access it. The token provides access to the content of the stream. Safeguard the token with the same measures that you use with your Amazon Web Services credentials.  The media that is made available through the manifest consists only of the requested stream, time range, and format. No other media data (such as frames outside the requested window or alternate bitrates) is made available.   Provide the URL (containing the encrypted session token) for the MPEG-DASH manifest to a media player that supports the MPEG-DASH protocol. Kinesis Video Streams makes the initialization fragment and media fragments available through the manifest URL. The initialization fragment contains the codec private data for the stream, and other data needed to set up the video or audio decoder and renderer. The media fragments contain encoded video frames or encoded audio samples.   The media player receives the authenticated URL and requests stream metadata and media data normally. When the media player requests data, it calls the following actions:    GetDASHManifest: Retrieves an MPEG DASH manifest, which contains the metadata for the media that you want to playback.    GetMP4InitFragment: Retrieves the MP4 initialization fragment. The media player typically loads the initialization fragment before loading any media fragments. This fragment contains the "fytp" and "moov" MP4 atoms, and the child atoms that are needed to initialize the media player decoder. The initialization fragment does not correspond to a fragment in a Kinesis video stream. It contains only the codec private data for the stream and respective track, which the media player needs to decode the media frames.    GetMP4MediaFragment: Retrieves MP4 media fragments. These fragments contain the "moof" and "mdat" MP4 atoms and their child atoms, containing the encoded fragment's media frames and their timestamps.   After the first media fragment is made available in a streaming session, any fragments that don't contain the same codec private data cause an error to be returned when those different media fragments are loaded. Therefore, the codec private data should not change between fragments in a session. This also means that the session fails if the fragments in a stream change from having only video to having both audio and video.  Data retrieved with this action is billable. See Pricing for details.      For restrictions that apply to MPEG-DASH sessions, see Kinesis Video Streams Limits.  You can monitor the amount of data that the media player consumes by monitoring the GetMP4MediaFragment.OutgoingBytes Amazon CloudWatch metric. For information about using CloudWatch to monitor Kinesis Video Streams, see Monitoring Kinesis Video Streams. For pricing information, see Amazon Kinesis Video Streams Pricing and Amazon Web Services Pricing. Charges for both HLS sessions and outgoing Amazon Web Services data apply. For more information about HLS, see HTTP Live Streaming on the Apple Developer site.  If an error is thrown after invoking a Kinesis Video Streams archived media API, in addition to the HTTP status code and the response body, it includes the following pieces of information:     x-amz-ErrorType HTTP header – contains a more specific error type in addition to what the HTTP status code provides.     x-amz-RequestId HTTP header – if you want to report an issue to Amazon Web Services the support team can better diagnose the problem if given the Request Id.   Both the HTTP status code and the ErrorType header can be utilized to make programmatic decisions about whether errors are retry-able and under what conditions, as well as provide information on what actions the client programmer might need to take in order to successfully try again. For more information, see the Errors section at the bottom of this topic, as well as Common Errors.  
    */
   getDASHStreamingSessionURL(callback?: (err: AWSError, data: KinesisVideoArchivedMedia.Types.GetDASHStreamingSessionURLOutput) => void): Request<KinesisVideoArchivedMedia.Types.GetDASHStreamingSessionURLOutput, AWSError>;
   /**
-   * Retrieves an HTTP Live Streaming (HLS) URL for the stream. You can then open the URL in a browser or media player to view the stream contents. Both the StreamName and the StreamARN parameters are optional, but you must specify either the StreamName or the StreamARN when invoking this API operation. An Amazon Kinesis video stream has the following requirements for providing data through HLS:   The media must contain h.264 or h.265 encoded video and, optionally, AAC encoded audio. Specifically, the codec ID of track 1 should be V_MPEG/ISO/AVC (for h.264) or V_MPEG/ISO/HEVC (for h.265). Optionally, the codec ID of track 2 should be A_AAC.   Data retention must be greater than 0.   The video track of each fragment must contain codec private data in the Advanced Video Coding (AVC) for H.264 format or HEVC for H.265 format (MPEG-4 specification ISO/IEC 14496-15). For information about adapting stream data to a given format, see NAL Adaptation Flags.   The audio track (if present) of each fragment must contain codec private data in the AAC format (AAC specification ISO/IEC 13818-7).   Kinesis Video Streams HLS sessions contain fragments in the fragmented MPEG-4 form (also called fMP4 or CMAF) or the MPEG-2 form (also called TS chunks, which the HLS specification also supports). For more information about HLS fragment types, see the HLS specification. The following procedure shows how to use HLS with Kinesis Video Streams:   Get an endpoint using GetDataEndpoint, specifying GET_HLS_STREAMING_SESSION_URL for the APIName parameter.   Retrieve the HLS URL using GetHLSStreamingSessionURL. Kinesis Video Streams creates an HLS streaming session to be used for accessing content in a stream using the HLS protocol. GetHLSStreamingSessionURL returns an authenticated URL (that includes an encrypted session token) for the session's HLS master playlist (the root resource needed for streaming with HLS).  Don't share or store this token where an unauthorized entity could access it. The token provides access to the content of the stream. Safeguard the token with the same measures that you would use with your AWS credentials.  The media that is made available through the playlist consists only of the requested stream, time range, and format. No other media data (such as frames outside the requested window or alternate bitrates) is made available.   Provide the URL (containing the encrypted session token) for the HLS master playlist to a media player that supports the HLS protocol. Kinesis Video Streams makes the HLS media playlist, initialization fragment, and media fragments available through the master playlist URL. The initialization fragment contains the codec private data for the stream, and other data needed to set up the video or audio decoder and renderer. The media fragments contain H.264-encoded video frames or AAC-encoded audio samples.   The media player receives the authenticated URL and requests stream metadata and media data normally. When the media player requests data, it calls the following actions:    GetHLSMasterPlaylist: Retrieves an HLS master playlist, which contains a URL for the GetHLSMediaPlaylist action for each track, and additional metadata for the media player, including estimated bitrate and resolution.    GetHLSMediaPlaylist: Retrieves an HLS media playlist, which contains a URL to access the MP4 initialization fragment with the GetMP4InitFragment action, and URLs to access the MP4 media fragments with the GetMP4MediaFragment actions. The HLS media playlist also contains metadata about the stream that the player needs to play it, such as whether the PlaybackMode is LIVE or ON_DEMAND. The HLS media playlist is typically static for sessions with a PlaybackType of ON_DEMAND. The HLS media playlist is continually updated with new fragments for sessions with a PlaybackType of LIVE. There is a distinct HLS media playlist for the video track and the audio track (if applicable) that contains MP4 media URLs for the specific track.     GetMP4InitFragment: Retrieves the MP4 initialization fragment. The media player typically loads the initialization fragment before loading any media fragments. This fragment contains the "fytp" and "moov" MP4 atoms, and the child atoms that are needed to initialize the media player decoder. The initialization fragment does not correspond to a fragment in a Kinesis video stream. It contains only the codec private data for the stream and respective track, which the media player needs to decode the media frames.    GetMP4MediaFragment: Retrieves MP4 media fragments. These fragments contain the "moof" and "mdat" MP4 atoms and their child atoms, containing the encoded fragment's media frames and their timestamps.   After the first media fragment is made available in a streaming session, any fragments that don't contain the same codec private data cause an error to be returned when those different media fragments are loaded. Therefore, the codec private data should not change between fragments in a session. This also means that the session fails if the fragments in a stream change from having only video to having both audio and video.  Data retrieved with this action is billable. See Pricing for details.    GetTSFragment: Retrieves MPEG TS fragments containing both initialization and media data for all tracks in the stream.  If the ContainerFormat is MPEG_TS, this API is used instead of GetMP4InitFragment and GetMP4MediaFragment to retrieve stream media.  Data retrieved with this action is billable. For more information, see Kinesis Video Streams pricing.     A streaming session URL must not be shared between players. The service might throttle a session if multiple media players are sharing it. For connection limits, see Kinesis Video Streams Limits. You can monitor the amount of data that the media player consumes by monitoring the GetMP4MediaFragment.OutgoingBytes Amazon CloudWatch metric. For information about using CloudWatch to monitor Kinesis Video Streams, see Monitoring Kinesis Video Streams. For pricing information, see Amazon Kinesis Video Streams Pricing and AWS Pricing. Charges for both HLS sessions and outgoing AWS data apply. For more information about HLS, see HTTP Live Streaming on the Apple Developer site.  If an error is thrown after invoking a Kinesis Video Streams archived media API, in addition to the HTTP status code and the response body, it includes the following pieces of information:     x-amz-ErrorType HTTP header – contains a more specific error type in addition to what the HTTP status code provides.     x-amz-RequestId HTTP header – if you want to report an issue to AWS, the support team can better diagnose the problem if given the Request Id.   Both the HTTP status code and the ErrorType header can be utilized to make programmatic decisions about whether errors are retry-able and under what conditions, as well as provide information on what actions the client programmer might need to take in order to successfully try again. For more information, see the Errors section at the bottom of this topic, as well as Common Errors.  
+   * Retrieves an HTTP Live Streaming (HLS) URL for the stream. You can then open the URL in a browser or media player to view the stream contents. Both the StreamName and the StreamARN parameters are optional, but you must specify either the StreamName or the StreamARN when invoking this API operation. An Amazon Kinesis video stream has the following requirements for providing data through HLS:   For streaming video, the media must contain H.264 or H.265 encoded video and, optionally, AAC encoded audio. Specifically, the codec ID of track 1 should be V_MPEG/ISO/AVC (for H.264) or V_MPEG/ISO/HEVC (for H.265). Optionally, the codec ID of track 2 should be A_AAC. For audio only streaming, the codec ID of track 1 should be A_AAC.   Data retention must be greater than 0.   The video track of each fragment must contain codec private data in the Advanced Video Coding (AVC) for H.264 format or HEVC for H.265 format (MPEG-4 specification ISO/IEC 14496-15). For information about adapting stream data to a given format, see NAL Adaptation Flags.   The audio track (if present) of each fragment must contain codec private data in the AAC format (AAC specification ISO/IEC 13818-7).   Kinesis Video Streams HLS sessions contain fragments in the fragmented MPEG-4 form (also called fMP4 or CMAF) or the MPEG-2 form (also called TS chunks, which the HLS specification also supports). For more information about HLS fragment types, see the HLS specification. The following procedure shows how to use HLS with Kinesis Video Streams:   Get an endpoint using GetDataEndpoint, specifying GET_HLS_STREAMING_SESSION_URL for the APIName parameter.   Retrieve the HLS URL using GetHLSStreamingSessionURL. Kinesis Video Streams creates an HLS streaming session to be used for accessing content in a stream using the HLS protocol. GetHLSStreamingSessionURL returns an authenticated URL (that includes an encrypted session token) for the session's HLS master playlist (the root resource needed for streaming with HLS).  Don't share or store this token where an unauthorized entity could access it. The token provides access to the content of the stream. Safeguard the token with the same measures that you would use with your Amazon Web Services credentials.  The media that is made available through the playlist consists only of the requested stream, time range, and format. No other media data (such as frames outside the requested window or alternate bitrates) is made available.   Provide the URL (containing the encrypted session token) for the HLS master playlist to a media player that supports the HLS protocol. Kinesis Video Streams makes the HLS media playlist, initialization fragment, and media fragments available through the master playlist URL. The initialization fragment contains the codec private data for the stream, and other data needed to set up the video or audio decoder and renderer. The media fragments contain H.264-encoded video frames or AAC-encoded audio samples.   The media player receives the authenticated URL and requests stream metadata and media data normally. When the media player requests data, it calls the following actions:    GetHLSMasterPlaylist: Retrieves an HLS master playlist, which contains a URL for the GetHLSMediaPlaylist action for each track, and additional metadata for the media player, including estimated bitrate and resolution.    GetHLSMediaPlaylist: Retrieves an HLS media playlist, which contains a URL to access the MP4 initialization fragment with the GetMP4InitFragment action, and URLs to access the MP4 media fragments with the GetMP4MediaFragment actions. The HLS media playlist also contains metadata about the stream that the player needs to play it, such as whether the PlaybackMode is LIVE or ON_DEMAND. The HLS media playlist is typically static for sessions with a PlaybackType of ON_DEMAND. The HLS media playlist is continually updated with new fragments for sessions with a PlaybackType of LIVE. There is a distinct HLS media playlist for the video track and the audio track (if applicable) that contains MP4 media URLs for the specific track.     GetMP4InitFragment: Retrieves the MP4 initialization fragment. The media player typically loads the initialization fragment before loading any media fragments. This fragment contains the "fytp" and "moov" MP4 atoms, and the child atoms that are needed to initialize the media player decoder. The initialization fragment does not correspond to a fragment in a Kinesis video stream. It contains only the codec private data for the stream and respective track, which the media player needs to decode the media frames.    GetMP4MediaFragment: Retrieves MP4 media fragments. These fragments contain the "moof" and "mdat" MP4 atoms and their child atoms, containing the encoded fragment's media frames and their timestamps.   For the HLS streaming session, in-track codec private data (CPD) changes are supported. After the first media fragment is made available in a streaming session, fragments can contain CPD changes for each track. Therefore, the fragments in a session can have a different resolution, bit rate, or other information in the CPD without interrupting playback. However, any change made in the track number or track codec format can return an error when those different media fragments are loaded. For example, streaming will fail if the fragments in the stream change from having only video to having both audio and video, or if an AAC audio track is changed to an ALAW audio track. For each streaming session, only 500 CPD changes are allowed.  Data retrieved with this action is billable. For information, see Pricing.    GetTSFragment: Retrieves MPEG TS fragments containing both initialization and media data for all tracks in the stream.  If the ContainerFormat is MPEG_TS, this API is used instead of GetMP4InitFragment and GetMP4MediaFragment to retrieve stream media.  Data retrieved with this action is billable. For more information, see Kinesis Video Streams pricing.     A streaming session URL must not be shared between players. The service might throttle a session if multiple media players are sharing it. For connection limits, see Kinesis Video Streams Limits. You can monitor the amount of data that the media player consumes by monitoring the GetMP4MediaFragment.OutgoingBytes Amazon CloudWatch metric. For information about using CloudWatch to monitor Kinesis Video Streams, see Monitoring Kinesis Video Streams. For pricing information, see Amazon Kinesis Video Streams Pricing and Amazon Web Services Pricing. Charges for both HLS sessions and outgoing Amazon Web Services data apply. For more information about HLS, see HTTP Live Streaming on the Apple Developer site.  If an error is thrown after invoking a Kinesis Video Streams archived media API, in addition to the HTTP status code and the response body, it includes the following pieces of information:     x-amz-ErrorType HTTP header – contains a more specific error type in addition to what the HTTP status code provides.     x-amz-RequestId HTTP header – if you want to report an issue to Amazon Web Services, the support team can better diagnose the problem if given the Request Id.   Both the HTTP status code and the ErrorType header can be utilized to make programmatic decisions about whether errors are retry-able and under what conditions, as well as provide information on what actions the client programmer might need to take in order to successfully try again. For more information, see the Errors section at the bottom of this topic, as well as Common Errors.  
    */
   getHLSStreamingSessionURL(params: KinesisVideoArchivedMedia.Types.GetHLSStreamingSessionURLInput, callback?: (err: AWSError, data: KinesisVideoArchivedMedia.Types.GetHLSStreamingSessionURLOutput) => void): Request<KinesisVideoArchivedMedia.Types.GetHLSStreamingSessionURLOutput, AWSError>;
   /**
-   * Retrieves an HTTP Live Streaming (HLS) URL for the stream. You can then open the URL in a browser or media player to view the stream contents. Both the StreamName and the StreamARN parameters are optional, but you must specify either the StreamName or the StreamARN when invoking this API operation. An Amazon Kinesis video stream has the following requirements for providing data through HLS:   The media must contain h.264 or h.265 encoded video and, optionally, AAC encoded audio. Specifically, the codec ID of track 1 should be V_MPEG/ISO/AVC (for h.264) or V_MPEG/ISO/HEVC (for h.265). Optionally, the codec ID of track 2 should be A_AAC.   Data retention must be greater than 0.   The video track of each fragment must contain codec private data in the Advanced Video Coding (AVC) for H.264 format or HEVC for H.265 format (MPEG-4 specification ISO/IEC 14496-15). For information about adapting stream data to a given format, see NAL Adaptation Flags.   The audio track (if present) of each fragment must contain codec private data in the AAC format (AAC specification ISO/IEC 13818-7).   Kinesis Video Streams HLS sessions contain fragments in the fragmented MPEG-4 form (also called fMP4 or CMAF) or the MPEG-2 form (also called TS chunks, which the HLS specification also supports). For more information about HLS fragment types, see the HLS specification. The following procedure shows how to use HLS with Kinesis Video Streams:   Get an endpoint using GetDataEndpoint, specifying GET_HLS_STREAMING_SESSION_URL for the APIName parameter.   Retrieve the HLS URL using GetHLSStreamingSessionURL. Kinesis Video Streams creates an HLS streaming session to be used for accessing content in a stream using the HLS protocol. GetHLSStreamingSessionURL returns an authenticated URL (that includes an encrypted session token) for the session's HLS master playlist (the root resource needed for streaming with HLS).  Don't share or store this token where an unauthorized entity could access it. The token provides access to the content of the stream. Safeguard the token with the same measures that you would use with your AWS credentials.  The media that is made available through the playlist consists only of the requested stream, time range, and format. No other media data (such as frames outside the requested window or alternate bitrates) is made available.   Provide the URL (containing the encrypted session token) for the HLS master playlist to a media player that supports the HLS protocol. Kinesis Video Streams makes the HLS media playlist, initialization fragment, and media fragments available through the master playlist URL. The initialization fragment contains the codec private data for the stream, and other data needed to set up the video or audio decoder and renderer. The media fragments contain H.264-encoded video frames or AAC-encoded audio samples.   The media player receives the authenticated URL and requests stream metadata and media data normally. When the media player requests data, it calls the following actions:    GetHLSMasterPlaylist: Retrieves an HLS master playlist, which contains a URL for the GetHLSMediaPlaylist action for each track, and additional metadata for the media player, including estimated bitrate and resolution.    GetHLSMediaPlaylist: Retrieves an HLS media playlist, which contains a URL to access the MP4 initialization fragment with the GetMP4InitFragment action, and URLs to access the MP4 media fragments with the GetMP4MediaFragment actions. The HLS media playlist also contains metadata about the stream that the player needs to play it, such as whether the PlaybackMode is LIVE or ON_DEMAND. The HLS media playlist is typically static for sessions with a PlaybackType of ON_DEMAND. The HLS media playlist is continually updated with new fragments for sessions with a PlaybackType of LIVE. There is a distinct HLS media playlist for the video track and the audio track (if applicable) that contains MP4 media URLs for the specific track.     GetMP4InitFragment: Retrieves the MP4 initialization fragment. The media player typically loads the initialization fragment before loading any media fragments. This fragment contains the "fytp" and "moov" MP4 atoms, and the child atoms that are needed to initialize the media player decoder. The initialization fragment does not correspond to a fragment in a Kinesis video stream. It contains only the codec private data for the stream and respective track, which the media player needs to decode the media frames.    GetMP4MediaFragment: Retrieves MP4 media fragments. These fragments contain the "moof" and "mdat" MP4 atoms and their child atoms, containing the encoded fragment's media frames and their timestamps.   After the first media fragment is made available in a streaming session, any fragments that don't contain the same codec private data cause an error to be returned when those different media fragments are loaded. Therefore, the codec private data should not change between fragments in a session. This also means that the session fails if the fragments in a stream change from having only video to having both audio and video.  Data retrieved with this action is billable. See Pricing for details.    GetTSFragment: Retrieves MPEG TS fragments containing both initialization and media data for all tracks in the stream.  If the ContainerFormat is MPEG_TS, this API is used instead of GetMP4InitFragment and GetMP4MediaFragment to retrieve stream media.  Data retrieved with this action is billable. For more information, see Kinesis Video Streams pricing.     A streaming session URL must not be shared between players. The service might throttle a session if multiple media players are sharing it. For connection limits, see Kinesis Video Streams Limits. You can monitor the amount of data that the media player consumes by monitoring the GetMP4MediaFragment.OutgoingBytes Amazon CloudWatch metric. For information about using CloudWatch to monitor Kinesis Video Streams, see Monitoring Kinesis Video Streams. For pricing information, see Amazon Kinesis Video Streams Pricing and AWS Pricing. Charges for both HLS sessions and outgoing AWS data apply. For more information about HLS, see HTTP Live Streaming on the Apple Developer site.  If an error is thrown after invoking a Kinesis Video Streams archived media API, in addition to the HTTP status code and the response body, it includes the following pieces of information:     x-amz-ErrorType HTTP header – contains a more specific error type in addition to what the HTTP status code provides.     x-amz-RequestId HTTP header – if you want to report an issue to AWS, the support team can better diagnose the problem if given the Request Id.   Both the HTTP status code and the ErrorType header can be utilized to make programmatic decisions about whether errors are retry-able and under what conditions, as well as provide information on what actions the client programmer might need to take in order to successfully try again. For more information, see the Errors section at the bottom of this topic, as well as Common Errors.  
+   * Retrieves an HTTP Live Streaming (HLS) URL for the stream. You can then open the URL in a browser or media player to view the stream contents. Both the StreamName and the StreamARN parameters are optional, but you must specify either the StreamName or the StreamARN when invoking this API operation. An Amazon Kinesis video stream has the following requirements for providing data through HLS:   For streaming video, the media must contain H.264 or H.265 encoded video and, optionally, AAC encoded audio. Specifically, the codec ID of track 1 should be V_MPEG/ISO/AVC (for H.264) or V_MPEG/ISO/HEVC (for H.265). Optionally, the codec ID of track 2 should be A_AAC. For audio only streaming, the codec ID of track 1 should be A_AAC.   Data retention must be greater than 0.   The video track of each fragment must contain codec private data in the Advanced Video Coding (AVC) for H.264 format or HEVC for H.265 format (MPEG-4 specification ISO/IEC 14496-15). For information about adapting stream data to a given format, see NAL Adaptation Flags.   The audio track (if present) of each fragment must contain codec private data in the AAC format (AAC specification ISO/IEC 13818-7).   Kinesis Video Streams HLS sessions contain fragments in the fragmented MPEG-4 form (also called fMP4 or CMAF) or the MPEG-2 form (also called TS chunks, which the HLS specification also supports). For more information about HLS fragment types, see the HLS specification. The following procedure shows how to use HLS with Kinesis Video Streams:   Get an endpoint using GetDataEndpoint, specifying GET_HLS_STREAMING_SESSION_URL for the APIName parameter.   Retrieve the HLS URL using GetHLSStreamingSessionURL. Kinesis Video Streams creates an HLS streaming session to be used for accessing content in a stream using the HLS protocol. GetHLSStreamingSessionURL returns an authenticated URL (that includes an encrypted session token) for the session's HLS master playlist (the root resource needed for streaming with HLS).  Don't share or store this token where an unauthorized entity could access it. The token provides access to the content of the stream. Safeguard the token with the same measures that you would use with your Amazon Web Services credentials.  The media that is made available through the playlist consists only of the requested stream, time range, and format. No other media data (such as frames outside the requested window or alternate bitrates) is made available.   Provide the URL (containing the encrypted session token) for the HLS master playlist to a media player that supports the HLS protocol. Kinesis Video Streams makes the HLS media playlist, initialization fragment, and media fragments available through the master playlist URL. The initialization fragment contains the codec private data for the stream, and other data needed to set up the video or audio decoder and renderer. The media fragments contain H.264-encoded video frames or AAC-encoded audio samples.   The media player receives the authenticated URL and requests stream metadata and media data normally. When the media player requests data, it calls the following actions:    GetHLSMasterPlaylist: Retrieves an HLS master playlist, which contains a URL for the GetHLSMediaPlaylist action for each track, and additional metadata for the media player, including estimated bitrate and resolution.    GetHLSMediaPlaylist: Retrieves an HLS media playlist, which contains a URL to access the MP4 initialization fragment with the GetMP4InitFragment action, and URLs to access the MP4 media fragments with the GetMP4MediaFragment actions. The HLS media playlist also contains metadata about the stream that the player needs to play it, such as whether the PlaybackMode is LIVE or ON_DEMAND. The HLS media playlist is typically static for sessions with a PlaybackType of ON_DEMAND. The HLS media playlist is continually updated with new fragments for sessions with a PlaybackType of LIVE. There is a distinct HLS media playlist for the video track and the audio track (if applicable) that contains MP4 media URLs for the specific track.     GetMP4InitFragment: Retrieves the MP4 initialization fragment. The media player typically loads the initialization fragment before loading any media fragments. This fragment contains the "fytp" and "moov" MP4 atoms, and the child atoms that are needed to initialize the media player decoder. The initialization fragment does not correspond to a fragment in a Kinesis video stream. It contains only the codec private data for the stream and respective track, which the media player needs to decode the media frames.    GetMP4MediaFragment: Retrieves MP4 media fragments. These fragments contain the "moof" and "mdat" MP4 atoms and their child atoms, containing the encoded fragment's media frames and their timestamps.   For the HLS streaming session, in-track codec private data (CPD) changes are supported. After the first media fragment is made available in a streaming session, fragments can contain CPD changes for each track. Therefore, the fragments in a session can have a different resolution, bit rate, or other information in the CPD without interrupting playback. However, any change made in the track number or track codec format can return an error when those different media fragments are loaded. For example, streaming will fail if the fragments in the stream change from having only video to having both audio and video, or if an AAC audio track is changed to an ALAW audio track. For each streaming session, only 500 CPD changes are allowed.  Data retrieved with this action is billable. For information, see Pricing.    GetTSFragment: Retrieves MPEG TS fragments containing both initialization and media data for all tracks in the stream.  If the ContainerFormat is MPEG_TS, this API is used instead of GetMP4InitFragment and GetMP4MediaFragment to retrieve stream media.  Data retrieved with this action is billable. For more information, see Kinesis Video Streams pricing.     A streaming session URL must not be shared between players. The service might throttle a session if multiple media players are sharing it. For connection limits, see Kinesis Video Streams Limits. You can monitor the amount of data that the media player consumes by monitoring the GetMP4MediaFragment.OutgoingBytes Amazon CloudWatch metric. For information about using CloudWatch to monitor Kinesis Video Streams, see Monitoring Kinesis Video Streams. For pricing information, see Amazon Kinesis Video Streams Pricing and Amazon Web Services Pricing. Charges for both HLS sessions and outgoing Amazon Web Services data apply. For more information about HLS, see HTTP Live Streaming on the Apple Developer site.  If an error is thrown after invoking a Kinesis Video Streams archived media API, in addition to the HTTP status code and the response body, it includes the following pieces of information:     x-amz-ErrorType HTTP header – contains a more specific error type in addition to what the HTTP status code provides.     x-amz-RequestId HTTP header – if you want to report an issue to Amazon Web Services, the support team can better diagnose the problem if given the Request Id.   Both the HTTP status code and the ErrorType header can be utilized to make programmatic decisions about whether errors are retry-able and under what conditions, as well as provide information on what actions the client programmer might need to take in order to successfully try again. For more information, see the Errors section at the bottom of this topic, as well as Common Errors.  
    */
   getHLSStreamingSessionURL(callback?: (err: AWSError, data: KinesisVideoArchivedMedia.Types.GetHLSStreamingSessionURLOutput) => void): Request<KinesisVideoArchivedMedia.Types.GetHLSStreamingSessionURLOutput, AWSError>;
   /**
@@ -45,19 +45,19 @@ declare class KinesisVideoArchivedMedia extends Service {
    */
   getImages(callback?: (err: AWSError, data: KinesisVideoArchivedMedia.Types.GetImagesOutput) => void): Request<KinesisVideoArchivedMedia.Types.GetImagesOutput, AWSError>;
   /**
-   * Gets media for a list of fragments (specified by fragment number) from the archived data in an Amazon Kinesis video stream.  You must first call the GetDataEndpoint API to get an endpoint. Then send the GetMediaForFragmentList requests to this endpoint using the --endpoint-url parameter.   For limits, see Kinesis Video Streams Limits.  If an error is thrown after invoking a Kinesis Video Streams archived media API, in addition to the HTTP status code and the response body, it includes the following pieces of information:     x-amz-ErrorType HTTP header – contains a more specific error type in addition to what the HTTP status code provides.     x-amz-RequestId HTTP header – if you want to report an issue to AWS, the support team can better diagnose the problem if given the Request Id.   Both the HTTP status code and the ErrorType header can be utilized to make programmatic decisions about whether errors are retry-able and under what conditions, as well as provide information on what actions the client programmer might need to take in order to successfully try again. For more information, see the Errors section at the bottom of this topic, as well as Common Errors.  
+   * Gets media for a list of fragments (specified by fragment number) from the archived data in an Amazon Kinesis video stream.  You must first call the GetDataEndpoint API to get an endpoint. Then send the GetMediaForFragmentList requests to this endpoint using the --endpoint-url parameter.   For limits, see Kinesis Video Streams Limits.  If an error is thrown after invoking a Kinesis Video Streams archived media API, in addition to the HTTP status code and the response body, it includes the following pieces of information:     x-amz-ErrorType HTTP header – contains a more specific error type in addition to what the HTTP status code provides.     x-amz-RequestId HTTP header – if you want to report an issue to Amazon Web Services, the support team can better diagnose the problem if given the Request Id.   Both the HTTP status code and the ErrorType header can be utilized to make programmatic decisions about whether errors are retry-able and under what conditions, as well as provide information on what actions the client programmer might need to take in order to successfully try again. For more information, see the Errors section at the bottom of this topic, as well as Common Errors.  
    */
   getMediaForFragmentList(params: KinesisVideoArchivedMedia.Types.GetMediaForFragmentListInput, callback?: (err: AWSError, data: KinesisVideoArchivedMedia.Types.GetMediaForFragmentListOutput) => void): Request<KinesisVideoArchivedMedia.Types.GetMediaForFragmentListOutput, AWSError>;
   /**
-   * Gets media for a list of fragments (specified by fragment number) from the archived data in an Amazon Kinesis video stream.  You must first call the GetDataEndpoint API to get an endpoint. Then send the GetMediaForFragmentList requests to this endpoint using the --endpoint-url parameter.   For limits, see Kinesis Video Streams Limits.  If an error is thrown after invoking a Kinesis Video Streams archived media API, in addition to the HTTP status code and the response body, it includes the following pieces of information:     x-amz-ErrorType HTTP header – contains a more specific error type in addition to what the HTTP status code provides.     x-amz-RequestId HTTP header – if you want to report an issue to AWS, the support team can better diagnose the problem if given the Request Id.   Both the HTTP status code and the ErrorType header can be utilized to make programmatic decisions about whether errors are retry-able and under what conditions, as well as provide information on what actions the client programmer might need to take in order to successfully try again. For more information, see the Errors section at the bottom of this topic, as well as Common Errors.  
+   * Gets media for a list of fragments (specified by fragment number) from the archived data in an Amazon Kinesis video stream.  You must first call the GetDataEndpoint API to get an endpoint. Then send the GetMediaForFragmentList requests to this endpoint using the --endpoint-url parameter.   For limits, see Kinesis Video Streams Limits.  If an error is thrown after invoking a Kinesis Video Streams archived media API, in addition to the HTTP status code and the response body, it includes the following pieces of information:     x-amz-ErrorType HTTP header – contains a more specific error type in addition to what the HTTP status code provides.     x-amz-RequestId HTTP header – if you want to report an issue to Amazon Web Services, the support team can better diagnose the problem if given the Request Id.   Both the HTTP status code and the ErrorType header can be utilized to make programmatic decisions about whether errors are retry-able and under what conditions, as well as provide information on what actions the client programmer might need to take in order to successfully try again. For more information, see the Errors section at the bottom of this topic, as well as Common Errors.  
    */
   getMediaForFragmentList(callback?: (err: AWSError, data: KinesisVideoArchivedMedia.Types.GetMediaForFragmentListOutput) => void): Request<KinesisVideoArchivedMedia.Types.GetMediaForFragmentListOutput, AWSError>;
   /**
-   * Returns a list of Fragment objects from the specified stream and timestamp range within the archived data. Listing fragments is eventually consistent. This means that even if the producer receives an acknowledgment that a fragment is persisted, the result might not be returned immediately from a request to ListFragments. However, results are typically available in less than one second.  You must first call the GetDataEndpoint API to get an endpoint. Then send the ListFragments requests to this endpoint using the --endpoint-url parameter.    If an error is thrown after invoking a Kinesis Video Streams archived media API, in addition to the HTTP status code and the response body, it includes the following pieces of information:     x-amz-ErrorType HTTP header – contains a more specific error type in addition to what the HTTP status code provides.     x-amz-RequestId HTTP header – if you want to report an issue to AWS, the support team can better diagnose the problem if given the Request Id.   Both the HTTP status code and the ErrorType header can be utilized to make programmatic decisions about whether errors are retry-able and under what conditions, as well as provide information on what actions the client programmer might need to take in order to successfully try again. For more information, see the Errors section at the bottom of this topic, as well as Common Errors.  
+   * Returns a list of Fragment objects from the specified stream and timestamp range within the archived data. Listing fragments is eventually consistent. This means that even if the producer receives an acknowledgment that a fragment is persisted, the result might not be returned immediately from a request to ListFragments. However, results are typically available in less than one second.  You must first call the GetDataEndpoint API to get an endpoint. Then send the ListFragments requests to this endpoint using the --endpoint-url parameter.    If an error is thrown after invoking a Kinesis Video Streams archived media API, in addition to the HTTP status code and the response body, it includes the following pieces of information:     x-amz-ErrorType HTTP header – contains a more specific error type in addition to what the HTTP status code provides.     x-amz-RequestId HTTP header – if you want to report an issue to Amazon Web Services, the support team can better diagnose the problem if given the Request Id.   Both the HTTP status code and the ErrorType header can be utilized to make programmatic decisions about whether errors are retry-able and under what conditions, as well as provide information on what actions the client programmer might need to take in order to successfully try again. For more information, see the Errors section at the bottom of this topic, as well as Common Errors.  
    */
   listFragments(params: KinesisVideoArchivedMedia.Types.ListFragmentsInput, callback?: (err: AWSError, data: KinesisVideoArchivedMedia.Types.ListFragmentsOutput) => void): Request<KinesisVideoArchivedMedia.Types.ListFragmentsOutput, AWSError>;
   /**
-   * Returns a list of Fragment objects from the specified stream and timestamp range within the archived data. Listing fragments is eventually consistent. This means that even if the producer receives an acknowledgment that a fragment is persisted, the result might not be returned immediately from a request to ListFragments. However, results are typically available in less than one second.  You must first call the GetDataEndpoint API to get an endpoint. Then send the ListFragments requests to this endpoint using the --endpoint-url parameter.    If an error is thrown after invoking a Kinesis Video Streams archived media API, in addition to the HTTP status code and the response body, it includes the following pieces of information:     x-amz-ErrorType HTTP header – contains a more specific error type in addition to what the HTTP status code provides.     x-amz-RequestId HTTP header – if you want to report an issue to AWS, the support team can better diagnose the problem if given the Request Id.   Both the HTTP status code and the ErrorType header can be utilized to make programmatic decisions about whether errors are retry-able and under what conditions, as well as provide information on what actions the client programmer might need to take in order to successfully try again. For more information, see the Errors section at the bottom of this topic, as well as Common Errors.  
+   * Returns a list of Fragment objects from the specified stream and timestamp range within the archived data. Listing fragments is eventually consistent. This means that even if the producer receives an acknowledgment that a fragment is persisted, the result might not be returned immediately from a request to ListFragments. However, results are typically available in less than one second.  You must first call the GetDataEndpoint API to get an endpoint. Then send the ListFragments requests to this endpoint using the --endpoint-url parameter.    If an error is thrown after invoking a Kinesis Video Streams archived media API, in addition to the HTTP status code and the response body, it includes the following pieces of information:     x-amz-ErrorType HTTP header – contains a more specific error type in addition to what the HTTP status code provides.     x-amz-RequestId HTTP header – if you want to report an issue to Amazon Web Services, the support team can better diagnose the problem if given the Request Id.   Both the HTTP status code and the ErrorType header can be utilized to make programmatic decisions about whether errors are retry-able and under what conditions, as well as provide information on what actions the client programmer might need to take in order to successfully try again. For more information, see the Errors section at the bottom of this topic, as well as Common Errors.  
    */
   listFragments(callback?: (err: AWSError, data: KinesisVideoArchivedMedia.Types.ListFragmentsOutput) => void): Request<KinesisVideoArchivedMedia.Types.ListFragmentsOutput, AWSError>;
 }
@@ -130,7 +130,7 @@ declare namespace KinesisVideoArchivedMedia {
      */
     ProducerTimestamp?: Timestamp;
     /**
-     * The timestamp from the AWS server corresponding to the fragment.
+     * The timestamp from the Amazon Web Services server corresponding to the fragment.
      */
     ServerTimestamp?: Timestamp;
     /**
@@ -278,13 +278,13 @@ declare namespace KinesisVideoArchivedMedia {
      */
     StartTimestamp: Timestamp;
     /**
-     * The end timestamp for the range of images to be generated.
+     * The end timestamp for the range of images to be generated. If the time range between StartTimestamp and EndTimestamp is more than 300 seconds above StartTimestamp, you will receive an IllegalArgumentException.
      */
     EndTimestamp: Timestamp;
     /**
-     * The time interval in milliseconds (ms) at which the images need to be generated from the stream. The minimum value that can be provided is 3000 ms. If the timestamp range is less than the sampling interval, the Image from the startTimestamp will be returned if available.   The minimum value of 3000 ms is a soft limit. If needed, a lower sampling frequency can be requested. 
+     * The time interval in milliseconds (ms) at which the images need to be generated from the stream, with a default of 3000 ms. The minimum value that can be provided is 200 ms. If the timestamp range is less than the sampling interval, the Image from the startTimestamp will be returned if available.   The minimum value of 200 ms is a hard limit. 
      */
-    SamplingInterval: SamplingInterval;
+    SamplingInterval?: SamplingInterval;
     /**
      * The format that will be used to encode the image.
      */
@@ -302,7 +302,7 @@ declare namespace KinesisVideoArchivedMedia {
      */
     HeightPixels?: HeightPixels;
     /**
-     * The maximum number of images to be returned by the API.   The default limit is 100 images per API response. The additional results will be paginated.  
+     * The maximum number of images to be returned by the API.   The default limit is 25 images per API response. Providing a MaxResults greater than this value will result in a page size of 25. Any additional results will be paginated.  
      */
     MaxResults?: GetImagesMaxResults;
     /**
@@ -341,7 +341,7 @@ declare namespace KinesisVideoArchivedMedia {
      */
     ContentType?: ContentType;
     /**
-     * The payload that Kinesis Video Streams returns is a sequence of chunks from the specified stream. For information about the chunks, see PutMedia. The chunks that Kinesis Video Streams returns in the GetMediaForFragmentList call also include the following additional Matroska (MKV) tags:    AWS_KINESISVIDEO_FRAGMENT_NUMBER - Fragment number returned in the chunk.   AWS_KINESISVIDEO_SERVER_SIDE_TIMESTAMP - Server-side timestamp of the fragment.   AWS_KINESISVIDEO_PRODUCER_SIDE_TIMESTAMP - Producer-side timestamp of the fragment.   The following tags will be included if an exception occurs:   AWS_KINESISVIDEO_FRAGMENT_NUMBER - The number of the fragment that threw the exception   AWS_KINESISVIDEO_EXCEPTION_ERROR_CODE - The integer code of the exception   AWS_KINESISVIDEO_EXCEPTION_MESSAGE - A text description of the exception  
+     * The payload that Kinesis Video Streams returns is a sequence of chunks from the specified stream. For information about the chunks, see PutMedia. The chunks that Kinesis Video Streams returns in the GetMediaForFragmentList call also include the following additional Matroska (MKV) tags:    AWS_KINESISVIDEO_FRAGMENT_NUMBER - Fragment number returned in the chunk.   AWS_KINESISVIDEO_SERVER_SIDE_TIMESTAMP - Server-side timestamp of the fragment.   AWS_KINESISVIDEO_PRODUCER_SIDE_TIMESTAMP - Producer-side timestamp of the fragment.   The following tags will be included if an exception occurs:   AWS_KINESISVIDEO_FRAGMENT_NUMBER - The number of the fragment that threw the exception    AWS_KINESISVIDEO_EXCEPTION_ERROR_CODE - The integer code of the    AWS_KINESISVIDEO_EXCEPTION_MESSAGE - A text description of the exception   
      */
     Payload?: Payload;
   }