npm - cdk-comprehend-s3olap - Versions diffs - 2.0.121 → 2.0.123 - Mend

cdk-comprehend-s3olap 2.0.121 → 2.0.123

This diff represents the content of publicly available package versions that have been released to one of the supported registries. The information contained in this diff is provided for informational purposes only and reflects changes between package versions as they appear in their respective public registries.

Files changed (89) hide show

package/node_modules/aws-sdk/clients/wafv2.d.ts CHANGED Viewed

@@ -12,19 +12,19 @@ declare class WAFV2 extends Service {
   constructor(options?: WAFV2.Types.ClientConfiguration)
   config: Config & WAFV2.Types.ClientConfiguration;
   /**
-   * Associates a web ACL with a regional application resource, to protect the resource. A regional application can be an Application Load Balancer (ALB), an Amazon API Gateway REST API, an AppSync GraphQL API, a Amazon Cognito user pool, or an App Runner service.  For Amazon CloudFront, don't use this call. Instead, use your CloudFront distribution configuration. To associate a web ACL, in the CloudFront call UpdateDistribution, set the web ACL ID to the Amazon Resource Name (ARN) of the web ACL. For information, see UpdateDistribution. When you make changes to web ACLs or web ACL components, like rules and rule groups, WAF propagates the changes everywhere that the web ACL and its components are stored and used. Your changes are applied within seconds, but there might be a brief period of inconsistency when the changes have arrived in some places and not in others. So, for example, if you change a rule action setting, the action might be the old action in one area and the new action in another area. Or if you add an IP address to an IP set used in a blocking rule, the new address might briefly be blocked in one area while still allowed in another. This temporary inconsistency can occur when you first associate a web ACL with an Amazon Web Services resource and when you change a web ACL that is already associated with a resource. Generally, any inconsistencies of this type last only a few seconds.
+   * Associates a web ACL with a regional application resource, to protect the resource. A regional application can be an Application Load Balancer (ALB), an Amazon API Gateway REST API, an AppSync GraphQL API, an Amazon Cognito user pool, or an App Runner service.  For Amazon CloudFront, don't use this call. Instead, use your CloudFront distribution configuration. To associate a web ACL, in the CloudFront call UpdateDistribution, set the web ACL ID to the Amazon Resource Name (ARN) of the web ACL. For information, see UpdateDistribution in the Amazon CloudFront Developer Guide.  When you make changes to web ACLs or web ACL components, like rules and rule groups, WAF propagates the changes everywhere that the web ACL and its components are stored and used. Your changes are applied within seconds, but there might be a brief period of inconsistency when the changes have arrived in some places and not in others. So, for example, if you change a rule action setting, the action might be the old action in one area and the new action in another area. Or if you add an IP address to an IP set used in a blocking rule, the new address might briefly be blocked in one area while still allowed in another. This temporary inconsistency can occur when you first associate a web ACL with an Amazon Web Services resource and when you change a web ACL that is already associated with a resource. Generally, any inconsistencies of this type last only a few seconds.
    */
   associateWebACL(params: WAFV2.Types.AssociateWebACLRequest, callback?: (err: AWSError, data: WAFV2.Types.AssociateWebACLResponse) => void): Request<WAFV2.Types.AssociateWebACLResponse, AWSError>;
   /**
-   * Associates a web ACL with a regional application resource, to protect the resource. A regional application can be an Application Load Balancer (ALB), an Amazon API Gateway REST API, an AppSync GraphQL API, a Amazon Cognito user pool, or an App Runner service.  For Amazon CloudFront, don't use this call. Instead, use your CloudFront distribution configuration. To associate a web ACL, in the CloudFront call UpdateDistribution, set the web ACL ID to the Amazon Resource Name (ARN) of the web ACL. For information, see UpdateDistribution. When you make changes to web ACLs or web ACL components, like rules and rule groups, WAF propagates the changes everywhere that the web ACL and its components are stored and used. Your changes are applied within seconds, but there might be a brief period of inconsistency when the changes have arrived in some places and not in others. So, for example, if you change a rule action setting, the action might be the old action in one area and the new action in another area. Or if you add an IP address to an IP set used in a blocking rule, the new address might briefly be blocked in one area while still allowed in another. This temporary inconsistency can occur when you first associate a web ACL with an Amazon Web Services resource and when you change a web ACL that is already associated with a resource. Generally, any inconsistencies of this type last only a few seconds.
+   * Associates a web ACL with a regional application resource, to protect the resource. A regional application can be an Application Load Balancer (ALB), an Amazon API Gateway REST API, an AppSync GraphQL API, an Amazon Cognito user pool, or an App Runner service.  For Amazon CloudFront, don't use this call. Instead, use your CloudFront distribution configuration. To associate a web ACL, in the CloudFront call UpdateDistribution, set the web ACL ID to the Amazon Resource Name (ARN) of the web ACL. For information, see UpdateDistribution in the Amazon CloudFront Developer Guide.  When you make changes to web ACLs or web ACL components, like rules and rule groups, WAF propagates the changes everywhere that the web ACL and its components are stored and used. Your changes are applied within seconds, but there might be a brief period of inconsistency when the changes have arrived in some places and not in others. So, for example, if you change a rule action setting, the action might be the old action in one area and the new action in another area. Or if you add an IP address to an IP set used in a blocking rule, the new address might briefly be blocked in one area while still allowed in another. This temporary inconsistency can occur when you first associate a web ACL with an Amazon Web Services resource and when you change a web ACL that is already associated with a resource. Generally, any inconsistencies of this type last only a few seconds.
    */
   associateWebACL(callback?: (err: AWSError, data: WAFV2.Types.AssociateWebACLResponse) => void): Request<WAFV2.Types.AssociateWebACLResponse, AWSError>;
   /**
-   * Returns the web ACL capacity unit (WCU) requirements for a specified scope and set of rules. You can use this to check the capacity requirements for the rules you want to use in a RuleGroup or WebACL.  WAF uses WCUs to calculate and control the operating resources that are used to run your rules, rule groups, and web ACLs. WAF calculates capacity differently for each rule type, to reflect the relative cost of each rule. Simple rules that cost little to run use fewer WCUs than more complex rules that use more processing power. Rule group capacity is fixed at creation, which helps users plan their web ACL WCU usage when they use a rule group. The WCU limit for web ACLs is 1,500.
+   * Returns the web ACL capacity unit (WCU) requirements for a specified scope and set of rules. You can use this to check the capacity requirements for the rules you want to use in a RuleGroup or WebACL.  WAF uses WCUs to calculate and control the operating resources that are used to run your rules, rule groups, and web ACLs. WAF calculates capacity differently for each rule type, to reflect the relative cost of each rule. Simple rules that cost little to run use fewer WCUs than more complex rules that use more processing power. Rule group capacity is fixed at creation, which helps users plan their web ACL WCU usage when they use a rule group. For more information, see WAF web ACL capacity units (WCU) in the WAF Developer Guide.
    */
   checkCapacity(params: WAFV2.Types.CheckCapacityRequest, callback?: (err: AWSError, data: WAFV2.Types.CheckCapacityResponse) => void): Request<WAFV2.Types.CheckCapacityResponse, AWSError>;
   /**
-   * Returns the web ACL capacity unit (WCU) requirements for a specified scope and set of rules. You can use this to check the capacity requirements for the rules you want to use in a RuleGroup or WebACL.  WAF uses WCUs to calculate and control the operating resources that are used to run your rules, rule groups, and web ACLs. WAF calculates capacity differently for each rule type, to reflect the relative cost of each rule. Simple rules that cost little to run use fewer WCUs than more complex rules that use more processing power. Rule group capacity is fixed at creation, which helps users plan their web ACL WCU usage when they use a rule group. The WCU limit for web ACLs is 1,500.
+   * Returns the web ACL capacity unit (WCU) requirements for a specified scope and set of rules. You can use this to check the capacity requirements for the rules you want to use in a RuleGroup or WebACL.  WAF uses WCUs to calculate and control the operating resources that are used to run your rules, rule groups, and web ACLs. WAF calculates capacity differently for each rule type, to reflect the relative cost of each rule. Simple rules that cost little to run use fewer WCUs than more complex rules that use more processing power. Rule group capacity is fixed at creation, which helps users plan their web ACL WCU usage when they use a rule group. For more information, see WAF web ACL capacity units (WCU) in the WAF Developer Guide.
    */
   checkCapacity(callback?: (err: AWSError, data: WAFV2.Types.CheckCapacityResponse) => void): Request<WAFV2.Types.CheckCapacityResponse, AWSError>;
   /**
@@ -52,11 +52,11 @@ declare class WAFV2 extends Service {
    */
   createRuleGroup(callback?: (err: AWSError, data: WAFV2.Types.CreateRuleGroupResponse) => void): Request<WAFV2.Types.CreateRuleGroupResponse, AWSError>;
   /**
-   * Creates a WebACL per the specifications provided.  A web ACL defines a collection of rules to use to inspect and control web requests. Each rule has an action defined (allow, block, or count) for requests that match the statement of the rule. In the web ACL, you assign a default action to take (allow, block) for any request that does not match any of the rules. The rules in a web ACL can be a combination of the types Rule, RuleGroup, and managed rule group. You can associate a web ACL with one or more Amazon Web Services resources to protect. The resources can be an Amazon CloudFront distribution, an Amazon API Gateway REST API, an Application Load Balancer, an AppSync GraphQL API, Amazon Cognito user pool, or an App Runner service.
+   * Creates a WebACL per the specifications provided.  A web ACL defines a collection of rules to use to inspect and control web requests. Each rule has an action defined (allow, block, or count) for requests that match the statement of the rule. In the web ACL, you assign a default action to take (allow, block) for any request that does not match any of the rules. The rules in a web ACL can be a combination of the types Rule, RuleGroup, and managed rule group. You can associate a web ACL with one or more Amazon Web Services resources to protect. The resources can be an Amazon CloudFront distribution, an Amazon API Gateway REST API, an Application Load Balancer, an AppSync GraphQL API, an Amazon Cognito user pool, or an App Runner service.
    */
   createWebACL(params: WAFV2.Types.CreateWebACLRequest, callback?: (err: AWSError, data: WAFV2.Types.CreateWebACLResponse) => void): Request<WAFV2.Types.CreateWebACLResponse, AWSError>;
   /**
-   * Creates a WebACL per the specifications provided.  A web ACL defines a collection of rules to use to inspect and control web requests. Each rule has an action defined (allow, block, or count) for requests that match the statement of the rule. In the web ACL, you assign a default action to take (allow, block) for any request that does not match any of the rules. The rules in a web ACL can be a combination of the types Rule, RuleGroup, and managed rule group. You can associate a web ACL with one or more Amazon Web Services resources to protect. The resources can be an Amazon CloudFront distribution, an Amazon API Gateway REST API, an Application Load Balancer, an AppSync GraphQL API, Amazon Cognito user pool, or an App Runner service.
+   * Creates a WebACL per the specifications provided.  A web ACL defines a collection of rules to use to inspect and control web requests. Each rule has an action defined (allow, block, or count) for requests that match the statement of the rule. In the web ACL, you assign a default action to take (allow, block) for any request that does not match any of the rules. The rules in a web ACL can be a combination of the types Rule, RuleGroup, and managed rule group. You can associate a web ACL with one or more Amazon Web Services resources to protect. The resources can be an Amazon CloudFront distribution, an Amazon API Gateway REST API, an Application Load Balancer, an AppSync GraphQL API, an Amazon Cognito user pool, or an App Runner service.
    */
   createWebACL(callback?: (err: AWSError, data: WAFV2.Types.CreateWebACLResponse) => void): Request<WAFV2.Types.CreateWebACLResponse, AWSError>;
   /**
@@ -108,11 +108,11 @@ declare class WAFV2 extends Service {
    */
   deleteRuleGroup(callback?: (err: AWSError, data: WAFV2.Types.DeleteRuleGroupResponse) => void): Request<WAFV2.Types.DeleteRuleGroupResponse, AWSError>;
   /**
-   * Deletes the specified WebACL.  You can only use this if ManagedByFirewallManager is false in the specified WebACL.   Before deleting any web ACL, first disassociate it from all resources.   To retrieve a list of the resources that are associated with a web ACL, use the following calls:   For regional resources, call ListResourcesForWebACL.   For Amazon CloudFront distributions, use the CloudFront call ListDistributionsByWebACLId. For information, see ListDistributionsByWebACLId.     To disassociate a resource from a web ACL, use the following calls:   For regional resources, call DisassociateWebACL.   For Amazon CloudFront distributions, provide an empty web ACL ID in the CloudFront call UpdateDistribution. For information, see UpdateDistribution.
+   * Deletes the specified WebACL.  You can only use this if ManagedByFirewallManager is false in the specified WebACL.   Before deleting any web ACL, first disassociate it from all resources.   To retrieve a list of the resources that are associated with a web ACL, use the following calls:   For regional resources, call ListResourcesForWebACL.   For Amazon CloudFront distributions, use the CloudFront call ListDistributionsByWebACLId. For information, see ListDistributionsByWebACLId in the Amazon CloudFront API Reference.      To disassociate a resource from a web ACL, use the following calls:   For regional resources, call DisassociateWebACL.   For Amazon CloudFront distributions, provide an empty web ACL ID in the CloudFront call UpdateDistribution. For information, see UpdateDistribution in the Amazon CloudFront API Reference.
    */
   deleteWebACL(params: WAFV2.Types.DeleteWebACLRequest, callback?: (err: AWSError, data: WAFV2.Types.DeleteWebACLResponse) => void): Request<WAFV2.Types.DeleteWebACLResponse, AWSError>;
   /**
-   * Deletes the specified WebACL.  You can only use this if ManagedByFirewallManager is false in the specified WebACL.   Before deleting any web ACL, first disassociate it from all resources.   To retrieve a list of the resources that are associated with a web ACL, use the following calls:   For regional resources, call ListResourcesForWebACL.   For Amazon CloudFront distributions, use the CloudFront call ListDistributionsByWebACLId. For information, see ListDistributionsByWebACLId.     To disassociate a resource from a web ACL, use the following calls:   For regional resources, call DisassociateWebACL.   For Amazon CloudFront distributions, provide an empty web ACL ID in the CloudFront call UpdateDistribution. For information, see UpdateDistribution.
+   * Deletes the specified WebACL.  You can only use this if ManagedByFirewallManager is false in the specified WebACL.   Before deleting any web ACL, first disassociate it from all resources.   To retrieve a list of the resources that are associated with a web ACL, use the following calls:   For regional resources, call ListResourcesForWebACL.   For Amazon CloudFront distributions, use the CloudFront call ListDistributionsByWebACLId. For information, see ListDistributionsByWebACLId in the Amazon CloudFront API Reference.      To disassociate a resource from a web ACL, use the following calls:   For regional resources, call DisassociateWebACL.   For Amazon CloudFront distributions, provide an empty web ACL ID in the CloudFront call UpdateDistribution. For information, see UpdateDistribution in the Amazon CloudFront API Reference.
    */
   deleteWebACL(callback?: (err: AWSError, data: WAFV2.Types.DeleteWebACLResponse) => void): Request<WAFV2.Types.DeleteWebACLResponse, AWSError>;
   /**
@@ -124,11 +124,11 @@ declare class WAFV2 extends Service {
    */
   describeManagedRuleGroup(callback?: (err: AWSError, data: WAFV2.Types.DescribeManagedRuleGroupResponse) => void): Request<WAFV2.Types.DescribeManagedRuleGroupResponse, AWSError>;
   /**
-   * Disassociates the specified regional application resource from any existing web ACL association. A resource can have at most one web ACL association. A regional application can be an Application Load Balancer (ALB), an Amazon API Gateway REST API, an AppSync GraphQL API, a Amazon Cognito user pool, or an App Runner service.  For Amazon CloudFront, don't use this call. Instead, use your CloudFront distribution configuration. To disassociate a web ACL, provide an empty web ACL ID in the CloudFront call UpdateDistribution. For information, see UpdateDistribution.
+   * Disassociates the specified regional application resource from any existing web ACL association. A resource can have at most one web ACL association. A regional application can be an Application Load Balancer (ALB), an Amazon API Gateway REST API, an AppSync GraphQL API, an Amazon Cognito user pool, or an App Runner service.  For Amazon CloudFront, don't use this call. Instead, use your CloudFront distribution configuration. To disassociate a web ACL, provide an empty web ACL ID in the CloudFront call UpdateDistribution. For information, see UpdateDistribution in the Amazon CloudFront API Reference.
    */
   disassociateWebACL(params: WAFV2.Types.DisassociateWebACLRequest, callback?: (err: AWSError, data: WAFV2.Types.DisassociateWebACLResponse) => void): Request<WAFV2.Types.DisassociateWebACLResponse, AWSError>;
   /**
-   * Disassociates the specified regional application resource from any existing web ACL association. A resource can have at most one web ACL association. A regional application can be an Application Load Balancer (ALB), an Amazon API Gateway REST API, an AppSync GraphQL API, a Amazon Cognito user pool, or an App Runner service.  For Amazon CloudFront, don't use this call. Instead, use your CloudFront distribution configuration. To disassociate a web ACL, provide an empty web ACL ID in the CloudFront call UpdateDistribution. For information, see UpdateDistribution.
+   * Disassociates the specified regional application resource from any existing web ACL association. A resource can have at most one web ACL association. A regional application can be an Application Load Balancer (ALB), an Amazon API Gateway REST API, an AppSync GraphQL API, an Amazon Cognito user pool, or an App Runner service.  For Amazon CloudFront, don't use this call. Instead, use your CloudFront distribution configuration. To disassociate a web ACL, provide an empty web ACL ID in the CloudFront call UpdateDistribution. For information, see UpdateDistribution in the Amazon CloudFront API Reference.
    */
   disassociateWebACL(callback?: (err: AWSError, data: WAFV2.Types.DisassociateWebACLResponse) => void): Request<WAFV2.Types.DisassociateWebACLResponse, AWSError>;
   /**
@@ -388,11 +388,11 @@ declare class WAFV2 extends Service {
    */
   updateRuleGroup(callback?: (err: AWSError, data: WAFV2.Types.UpdateRuleGroupResponse) => void): Request<WAFV2.Types.UpdateRuleGroupResponse, AWSError>;
   /**
-   * Updates the specified WebACL. While updating a web ACL, WAF provides continuous coverage to the resources that you have associated with the web ACL.   This operation completely replaces the mutable specifications that you already have for the web ACL with the ones that you provide to this call.  To modify a web ACL, do the following:    Retrieve it by calling GetWebACL    Update its settings as needed   Provide the complete web ACL specification to this call    When you make changes to web ACLs or web ACL components, like rules and rule groups, WAF propagates the changes everywhere that the web ACL and its components are stored and used. Your changes are applied within seconds, but there might be a brief period of inconsistency when the changes have arrived in some places and not in others. So, for example, if you change a rule action setting, the action might be the old action in one area and the new action in another area. Or if you add an IP address to an IP set used in a blocking rule, the new address might briefly be blocked in one area while still allowed in another. This temporary inconsistency can occur when you first associate a web ACL with an Amazon Web Services resource and when you change a web ACL that is already associated with a resource. Generally, any inconsistencies of this type last only a few seconds.  A web ACL defines a collection of rules to use to inspect and control web requests. Each rule has an action defined (allow, block, or count) for requests that match the statement of the rule. In the web ACL, you assign a default action to take (allow, block) for any request that does not match any of the rules. The rules in a web ACL can be a combination of the types Rule, RuleGroup, and managed rule group. You can associate a web ACL with one or more Amazon Web Services resources to protect. The resources can be an Amazon CloudFront distribution, an Amazon API Gateway REST API, an Application Load Balancer, an AppSync GraphQL API, Amazon Cognito user pool, or an App Runner service.
+   * Updates the specified WebACL. While updating a web ACL, WAF provides continuous coverage to the resources that you have associated with the web ACL.   This operation completely replaces the mutable specifications that you already have for the web ACL with the ones that you provide to this call.  To modify a web ACL, do the following:    Retrieve it by calling GetWebACL    Update its settings as needed   Provide the complete web ACL specification to this call    When you make changes to web ACLs or web ACL components, like rules and rule groups, WAF propagates the changes everywhere that the web ACL and its components are stored and used. Your changes are applied within seconds, but there might be a brief period of inconsistency when the changes have arrived in some places and not in others. So, for example, if you change a rule action setting, the action might be the old action in one area and the new action in another area. Or if you add an IP address to an IP set used in a blocking rule, the new address might briefly be blocked in one area while still allowed in another. This temporary inconsistency can occur when you first associate a web ACL with an Amazon Web Services resource and when you change a web ACL that is already associated with a resource. Generally, any inconsistencies of this type last only a few seconds.  A web ACL defines a collection of rules to use to inspect and control web requests. Each rule has an action defined (allow, block, or count) for requests that match the statement of the rule. In the web ACL, you assign a default action to take (allow, block) for any request that does not match any of the rules. The rules in a web ACL can be a combination of the types Rule, RuleGroup, and managed rule group. You can associate a web ACL with one or more Amazon Web Services resources to protect. The resources can be an Amazon CloudFront distribution, an Amazon API Gateway REST API, an Application Load Balancer, an AppSync GraphQL API, an Amazon Cognito user pool, or an App Runner service.
    */
   updateWebACL(params: WAFV2.Types.UpdateWebACLRequest, callback?: (err: AWSError, data: WAFV2.Types.UpdateWebACLResponse) => void): Request<WAFV2.Types.UpdateWebACLResponse, AWSError>;
   /**
-   * Updates the specified WebACL. While updating a web ACL, WAF provides continuous coverage to the resources that you have associated with the web ACL.   This operation completely replaces the mutable specifications that you already have for the web ACL with the ones that you provide to this call.  To modify a web ACL, do the following:    Retrieve it by calling GetWebACL    Update its settings as needed   Provide the complete web ACL specification to this call    When you make changes to web ACLs or web ACL components, like rules and rule groups, WAF propagates the changes everywhere that the web ACL and its components are stored and used. Your changes are applied within seconds, but there might be a brief period of inconsistency when the changes have arrived in some places and not in others. So, for example, if you change a rule action setting, the action might be the old action in one area and the new action in another area. Or if you add an IP address to an IP set used in a blocking rule, the new address might briefly be blocked in one area while still allowed in another. This temporary inconsistency can occur when you first associate a web ACL with an Amazon Web Services resource and when you change a web ACL that is already associated with a resource. Generally, any inconsistencies of this type last only a few seconds.  A web ACL defines a collection of rules to use to inspect and control web requests. Each rule has an action defined (allow, block, or count) for requests that match the statement of the rule. In the web ACL, you assign a default action to take (allow, block) for any request that does not match any of the rules. The rules in a web ACL can be a combination of the types Rule, RuleGroup, and managed rule group. You can associate a web ACL with one or more Amazon Web Services resources to protect. The resources can be an Amazon CloudFront distribution, an Amazon API Gateway REST API, an Application Load Balancer, an AppSync GraphQL API, Amazon Cognito user pool, or an App Runner service.
+   * Updates the specified WebACL. While updating a web ACL, WAF provides continuous coverage to the resources that you have associated with the web ACL.   This operation completely replaces the mutable specifications that you already have for the web ACL with the ones that you provide to this call.  To modify a web ACL, do the following:    Retrieve it by calling GetWebACL    Update its settings as needed   Provide the complete web ACL specification to this call    When you make changes to web ACLs or web ACL components, like rules and rule groups, WAF propagates the changes everywhere that the web ACL and its components are stored and used. Your changes are applied within seconds, but there might be a brief period of inconsistency when the changes have arrived in some places and not in others. So, for example, if you change a rule action setting, the action might be the old action in one area and the new action in another area. Or if you add an IP address to an IP set used in a blocking rule, the new address might briefly be blocked in one area while still allowed in another. This temporary inconsistency can occur when you first associate a web ACL with an Amazon Web Services resource and when you change a web ACL that is already associated with a resource. Generally, any inconsistencies of this type last only a few seconds.  A web ACL defines a collection of rules to use to inspect and control web requests. Each rule has an action defined (allow, block, or count) for requests that match the statement of the rule. In the web ACL, you assign a default action to take (allow, block) for any request that does not match any of the rules. The rules in a web ACL can be a combination of the types Rule, RuleGroup, and managed rule group. You can associate a web ACL with one or more Amazon Web Services resources to protect. The resources can be an Amazon CloudFront distribution, an Amazon API Gateway REST API, an Application Load Balancer, an AppSync GraphQL API, an Amazon Cognito user pool, or an App Runner service.
    */
   updateWebACL(callback?: (err: AWSError, data: WAFV2.Types.UpdateWebACLResponse) => void): Request<WAFV2.Types.UpdateWebACLResponse, AWSError>;
 }
@@ -413,7 +413,7 @@ declare namespace WAFV2 {
   }
   export interface AWSManagedRulesBotControlRuleSet {
     /**
-     * The inspection level to use for the Bot Control rule group. The common level is the least expensive. The targeted level includes all common level rules and adds rules with more advanced inspection criteria. For details, see WAF Bot Control rule group.
+     * The inspection level to use for the Bot Control rule group. The common level is the least expensive. The targeted level includes all common level rules and adds rules with more advanced inspection criteria. For details, see WAF Bot Control rule group in the WAF Developer Guide.
      */
     InspectionLevel: InspectionLevel;
   }
@@ -447,12 +447,19 @@ declare namespace WAFV2 {
      */
     WebACLArn: ResourceArn;
     /**
-     * The Amazon Resource Name (ARN) of the resource to associate with the web ACL.  The ARN must be in one of the following formats:   For an Application Load Balancer: arn:aws:elasticloadbalancing:region:account-id:loadbalancer/app/load-balancer-name/load-balancer-id     For an Amazon API Gateway REST API: arn:aws:apigateway:region::/restapis/api-id/stages/stage-name     For an AppSync GraphQL API: arn:aws:appsync:region:account-id:apis/GraphQLApiId     For an Amazon Cognito user pool: arn:aws:cognito-idp:region:account-id:userpool/user-pool-id     For an App Runner service: arn:aws:apprunner:region:account-id:service/apprunner-service-name/apprunner-service-id
+     * The Amazon Resource Name (ARN) of the resource to associate with the web ACL.  The ARN must be in one of the following formats:   For an Application Load Balancer: arn:partition:elasticloadbalancing:region:account-id:loadbalancer/app/load-balancer-name/load-balancer-id     For an Amazon API Gateway REST API: arn:partition:apigateway:region::/restapis/api-id/stages/stage-name     For an AppSync GraphQL API: arn:partition:appsync:region:account-id:apis/GraphQLApiId     For an Amazon Cognito user pool: arn:partition:cognito-idp:region:account-id:userpool/user-pool-id     For an App Runner service: arn:partition:apprunner:region:account-id:service/apprunner-service-name/apprunner-service-id
      */
     ResourceArn: ResourceArn;
   }
   export interface AssociateWebACLResponse {
   }
+  export type AssociatedResourceType = "CLOUDFRONT"|string;
+  export interface AssociationConfig {
+    /**
+     * Customizes the maximum size of the request body that your protected CloudFront distributions forward to WAF for inspection. The default size is 16 KB (16,384 kilobytes).   You are charged additional fees when your protected resources forward body sizes that are larger than the default. For more information, see WAF Pricing.
+     */
+    RequestBody?: RequestBody;
+  }
   export interface BlockAction {
     /**
      * Defines a custom response for the web request. For information about customizing web requests and responses, see Customizing web requests and responses in WAF in the WAF Developer Guide.
@@ -461,7 +468,7 @@ declare namespace WAFV2 {
   }
   export interface Body {
     /**
-     * What WAF should do if the body is larger than WAF can inspect. WAF does not support inspecting the entire contents of the body of a web request when the body exceeds 8 KB (8192 bytes). Only the first 8 KB of the request body are forwarded to WAF by the underlying host service.  The options for oversize handling are the following:    CONTINUE - Inspect the body normally, according to the rule inspection criteria.     MATCH - Treat the web request as matching the rule statement. WAF applies the rule action to the request.    NO_MATCH - Treat the web request as not matching the rule statement.   You can combine the MATCH or NO_MATCH settings for oversize handling with your rule and web ACL action settings, so that you block any request whose body is over 8 KB.  Default: CONTINUE
+     * What WAF should do if the body is larger than WAF can inspect. WAF does not support inspecting the entire contents of the web request body if the body exceeds the limit for the resource type. If the body is larger than the limit, the underlying host service only forwards the contents that are below the limit to WAF for inspection.  The default limit is 8 KB (8,192 kilobytes) for regional resources and 16 KB (16,384 kilobytes) for CloudFront distributions. For CloudFront distributions, you can increase the limit in the web ACL AssociationConfig, for additional processing fees.  The options for oversize handling are the following:    CONTINUE - Inspect the body normally, according to the rule inspection criteria.     MATCH - Treat the web request as matching the rule statement. WAF applies the rule action to the request.    NO_MATCH - Treat the web request as not matching the rule statement.   You can combine the MATCH or NO_MATCH settings for oversize handling with your rule and web ACL action settings, so that you block any request whose body is over the limit.  Default: CONTINUE
      */
     OversizeHandling?: OversizeHandling;
   }
@@ -540,7 +547,7 @@ declare namespace WAFV2 {
   }
   export interface CheckCapacityRequest {
     /**
-     * Specifies whether this is for an Amazon CloudFront distribution or for a regional application. A regional application can be an Application Load Balancer (ALB), an Amazon API Gateway REST API, an AppSync GraphQL API, a Amazon Cognito user pool, or an App Runner service.  To work with CloudFront, you must also specify the Region US East (N. Virginia) as follows:    CLI - Specify the Region when you use the CloudFront scope: --scope=CLOUDFRONT --region=us-east-1.    API and SDKs - For all calls, use the Region endpoint us-east-1.
+     * Specifies whether this is for an Amazon CloudFront distribution or for a regional application. A regional application can be an Application Load Balancer (ALB), an Amazon API Gateway REST API, an AppSync GraphQL API, an Amazon Cognito user pool, or an App Runner service.  To work with CloudFront, you must also specify the Region US East (N. Virginia) as follows:    CLI - Specify the Region when you use the CloudFront scope: --scope=CLOUDFRONT --region=us-east-1.    API and SDKs - For all calls, use the Region endpoint us-east-1.
      */
     Scope: Scope;
     /**
@@ -611,7 +618,7 @@ declare namespace WAFV2 {
      */
     Name: EntityName;
     /**
-     * Specifies whether this is for an Amazon CloudFront distribution or for a regional application. A regional application can be an Application Load Balancer (ALB), an Amazon API Gateway REST API, an AppSync GraphQL API, a Amazon Cognito user pool, or an App Runner service.  To work with CloudFront, you must also specify the Region US East (N. Virginia) as follows:    CLI - Specify the Region when you use the CloudFront scope: --scope=CLOUDFRONT --region=us-east-1.    API and SDKs - For all calls, use the Region endpoint us-east-1.
+     * Specifies whether this is for an Amazon CloudFront distribution or for a regional application. A regional application can be an Application Load Balancer (ALB), an Amazon API Gateway REST API, an AppSync GraphQL API, an Amazon Cognito user pool, or an App Runner service.  To work with CloudFront, you must also specify the Region US East (N. Virginia) as follows:    CLI - Specify the Region when you use the CloudFront scope: --scope=CLOUDFRONT --region=us-east-1.    API and SDKs - For all calls, use the Region endpoint us-east-1.
      */
     Scope: Scope;
     /**
@@ -643,7 +650,7 @@ declare namespace WAFV2 {
      */
     Name: EntityName;
     /**
-     * Specifies whether this is for an Amazon CloudFront distribution or for a regional application. A regional application can be an Application Load Balancer (ALB), an Amazon API Gateway REST API, an AppSync GraphQL API, a Amazon Cognito user pool, or an App Runner service.  To work with CloudFront, you must also specify the Region US East (N. Virginia) as follows:    CLI - Specify the Region when you use the CloudFront scope: --scope=CLOUDFRONT --region=us-east-1.    API and SDKs - For all calls, use the Region endpoint us-east-1.
+     * Specifies whether this is for an Amazon CloudFront distribution or for a regional application. A regional application can be an Application Load Balancer (ALB), an Amazon API Gateway REST API, an AppSync GraphQL API, an Amazon Cognito user pool, or an App Runner service.  To work with CloudFront, you must also specify the Region US East (N. Virginia) as follows:    CLI - Specify the Region when you use the CloudFront scope: --scope=CLOUDFRONT --region=us-east-1.    API and SDKs - For all calls, use the Region endpoint us-east-1.
      */
     Scope: Scope;
     /**
@@ -671,11 +678,11 @@ declare namespace WAFV2 {
      */
     Name: EntityName;
     /**
-     * Specifies whether this is for an Amazon CloudFront distribution or for a regional application. A regional application can be an Application Load Balancer (ALB), an Amazon API Gateway REST API, an AppSync GraphQL API, a Amazon Cognito user pool, or an App Runner service.  To work with CloudFront, you must also specify the Region US East (N. Virginia) as follows:    CLI - Specify the Region when you use the CloudFront scope: --scope=CLOUDFRONT --region=us-east-1.    API and SDKs - For all calls, use the Region endpoint us-east-1.
+     * Specifies whether this is for an Amazon CloudFront distribution or for a regional application. A regional application can be an Application Load Balancer (ALB), an Amazon API Gateway REST API, an AppSync GraphQL API, an Amazon Cognito user pool, or an App Runner service.  To work with CloudFront, you must also specify the Region US East (N. Virginia) as follows:    CLI - Specify the Region when you use the CloudFront scope: --scope=CLOUDFRONT --region=us-east-1.    API and SDKs - For all calls, use the Region endpoint us-east-1.
      */
     Scope: Scope;
     /**
-     * The web ACL capacity units (WCUs) required for this rule group. When you create your own rule group, you define this, and you cannot change it after creation. When you add or modify the rules in a rule group, WAF enforces this limit. You can check the capacity for a set of rules using CheckCapacity. WAF uses WCUs to calculate and control the operating resources that are used to run your rules, rule groups, and web ACLs. WAF calculates capacity differently for each rule type, to reflect the relative cost of each rule. Simple rules that cost little to run use fewer WCUs than more complex rules that use more processing power. Rule group capacity is fixed at creation, which helps users plan their web ACL WCU usage when they use a rule group. The WCU limit for web ACLs is 1,500.
+     * The web ACL capacity units (WCUs) required for this rule group. When you create your own rule group, you define this, and you cannot change it after creation. When you add or modify the rules in a rule group, WAF enforces this limit. You can check the capacity for a set of rules using CheckCapacity. WAF uses WCUs to calculate and control the operating resources that are used to run your rules, rule groups, and web ACLs. WAF calculates capacity differently for each rule type, to reflect the relative cost of each rule. Simple rules that cost little to run use fewer WCUs than more complex rules that use more processing power. Rule group capacity is fixed at creation, which helps users plan their web ACL WCU usage when they use a rule group. For more information, see WAF web ACL capacity units (WCU) in the WAF Developer Guide.
      */
     Capacity: CapacityUnit;
     /**
@@ -711,7 +718,7 @@ declare namespace WAFV2 {
      */
     Name: EntityName;
     /**
-     * Specifies whether this is for an Amazon CloudFront distribution or for a regional application. A regional application can be an Application Load Balancer (ALB), an Amazon API Gateway REST API, an AppSync GraphQL API, a Amazon Cognito user pool, or an App Runner service.  To work with CloudFront, you must also specify the Region US East (N. Virginia) as follows:    CLI - Specify the Region when you use the CloudFront scope: --scope=CLOUDFRONT --region=us-east-1.    API and SDKs - For all calls, use the Region endpoint us-east-1.
+     * Specifies whether this is for an Amazon CloudFront distribution or for a regional application. A regional application can be an Application Load Balancer (ALB), an Amazon API Gateway REST API, an AppSync GraphQL API, an Amazon Cognito user pool, or an App Runner service.  To work with CloudFront, you must also specify the Region US East (N. Virginia) as follows:    CLI - Specify the Region when you use the CloudFront scope: --scope=CLOUDFRONT --region=us-east-1.    API and SDKs - For all calls, use the Region endpoint us-east-1.
      */
     Scope: Scope;
     /**
@@ -750,6 +757,10 @@ declare namespace WAFV2 {
      * Specifies the domains that WAF should accept in a web request token. This enables the use of tokens across multiple protected websites. When WAF provides a token, it uses the domain of the Amazon Web Services resource that the web ACL is protecting. If you don't specify a list of token domains, WAF accepts tokens only for the domain of the protected resource. With a token domain list, WAF accepts the resource's host domain plus all domains in the token domain list, including their prefixed subdomains. Example JSON: "TokenDomains": { "mywebsite.com", "myotherwebsite.com" }  Public suffixes aren't allowed. For example, you can't use usa.gov or co.uk as token domains.
      */
     TokenDomains?: TokenDomains;
+    /**
+     * Specifies custom configurations for the associations between the web ACL and protected resources.  Use this to customize the maximum size of the request body that your protected CloudFront distributions forward to WAF for inspection. The default is 16 KB (16,384 kilobytes).   You are charged additional fees when your protected resources forward body sizes that are larger than the default. For more information, see WAF Pricing.
+     */
+    AssociationConfig?: AssociationConfig;
   }
   export interface CreateWebACLResponse {
     /**
@@ -833,7 +844,7 @@ declare namespace WAFV2 {
      */
     Name: EntityName;
     /**
-     * Specifies whether this is for an Amazon CloudFront distribution or for a regional application. A regional application can be an Application Load Balancer (ALB), an Amazon API Gateway REST API, an AppSync GraphQL API, a Amazon Cognito user pool, or an App Runner service.  To work with CloudFront, you must also specify the Region US East (N. Virginia) as follows:    CLI - Specify the Region when you use the CloudFront scope: --scope=CLOUDFRONT --region=us-east-1.    API and SDKs - For all calls, use the Region endpoint us-east-1.
+     * Specifies whether this is for an Amazon CloudFront distribution or for a regional application. A regional application can be an Application Load Balancer (ALB), an Amazon API Gateway REST API, an AppSync GraphQL API, an Amazon Cognito user pool, or an App Runner service.  To work with CloudFront, you must also specify the Region US East (N. Virginia) as follows:    CLI - Specify the Region when you use the CloudFront scope: --scope=CLOUDFRONT --region=us-east-1.    API and SDKs - For all calls, use the Region endpoint us-east-1.
      */
     Scope: Scope;
     /**
@@ -869,7 +880,7 @@ declare namespace WAFV2 {
      */
     Name: EntityName;
     /**
-     * Specifies whether this is for an Amazon CloudFront distribution or for a regional application. A regional application can be an Application Load Balancer (ALB), an Amazon API Gateway REST API, an AppSync GraphQL API, a Amazon Cognito user pool, or an App Runner service.  To work with CloudFront, you must also specify the Region US East (N. Virginia) as follows:    CLI - Specify the Region when you use the CloudFront scope: --scope=CLOUDFRONT --region=us-east-1.    API and SDKs - For all calls, use the Region endpoint us-east-1.
+     * Specifies whether this is for an Amazon CloudFront distribution or for a regional application. A regional application can be an Application Load Balancer (ALB), an Amazon API Gateway REST API, an AppSync GraphQL API, an Amazon Cognito user pool, or an App Runner service.  To work with CloudFront, you must also specify the Region US East (N. Virginia) as follows:    CLI - Specify the Region when you use the CloudFront scope: --scope=CLOUDFRONT --region=us-east-1.    API and SDKs - For all calls, use the Region endpoint us-east-1.
      */
     Scope: Scope;
     /**
@@ -889,7 +900,7 @@ declare namespace WAFV2 {
      */
     Name: EntityName;
     /**
-     * Specifies whether this is for an Amazon CloudFront distribution or for a regional application. A regional application can be an Application Load Balancer (ALB), an Amazon API Gateway REST API, an AppSync GraphQL API, a Amazon Cognito user pool, or an App Runner service.  To work with CloudFront, you must also specify the Region US East (N. Virginia) as follows:    CLI - Specify the Region when you use the CloudFront scope: --scope=CLOUDFRONT --region=us-east-1.    API and SDKs - For all calls, use the Region endpoint us-east-1.
+     * Specifies whether this is for an Amazon CloudFront distribution or for a regional application. A regional application can be an Application Load Balancer (ALB), an Amazon API Gateway REST API, an AppSync GraphQL API, an Amazon Cognito user pool, or an App Runner service.  To work with CloudFront, you must also specify the Region US East (N. Virginia) as follows:    CLI - Specify the Region when you use the CloudFront scope: --scope=CLOUDFRONT --region=us-east-1.    API and SDKs - For all calls, use the Region endpoint us-east-1.
      */
     Scope: Scope;
     /**
@@ -909,7 +920,7 @@ declare namespace WAFV2 {
      */
     Name: EntityName;
     /**
-     * Specifies whether this is for an Amazon CloudFront distribution or for a regional application. A regional application can be an Application Load Balancer (ALB), an Amazon API Gateway REST API, an AppSync GraphQL API, a Amazon Cognito user pool, or an App Runner service.  To work with CloudFront, you must also specify the Region US East (N. Virginia) as follows:    CLI - Specify the Region when you use the CloudFront scope: --scope=CLOUDFRONT --region=us-east-1.    API and SDKs - For all calls, use the Region endpoint us-east-1.
+     * Specifies whether this is for an Amazon CloudFront distribution or for a regional application. A regional application can be an Application Load Balancer (ALB), an Amazon API Gateway REST API, an AppSync GraphQL API, an Amazon Cognito user pool, or an App Runner service.  To work with CloudFront, you must also specify the Region US East (N. Virginia) as follows:    CLI - Specify the Region when you use the CloudFront scope: --scope=CLOUDFRONT --region=us-east-1.    API and SDKs - For all calls, use the Region endpoint us-east-1.
      */
     Scope: Scope;
     /**
@@ -933,7 +944,7 @@ declare namespace WAFV2 {
      */
     Name: EntityName;
     /**
-     * Specifies whether this is for an Amazon CloudFront distribution or for a regional application. A regional application can be an Application Load Balancer (ALB), an Amazon API Gateway REST API, an AppSync GraphQL API, a Amazon Cognito user pool, or an App Runner service.  To work with CloudFront, you must also specify the Region US East (N. Virginia) as follows:    CLI - Specify the Region when you use the CloudFront scope: --scope=CLOUDFRONT --region=us-east-1.    API and SDKs - For all calls, use the Region endpoint us-east-1.
+     * Specifies whether this is for an Amazon CloudFront distribution or for a regional application. A regional application can be an Application Load Balancer (ALB), an Amazon API Gateway REST API, an AppSync GraphQL API, an Amazon Cognito user pool, or an App Runner service.  To work with CloudFront, you must also specify the Region US East (N. Virginia) as follows:    CLI - Specify the Region when you use the CloudFront scope: --scope=CLOUDFRONT --region=us-east-1.    API and SDKs - For all calls, use the Region endpoint us-east-1.
      */
     Scope: Scope;
     /**
@@ -951,7 +962,7 @@ declare namespace WAFV2 {
      */
     SnsTopicArn?: ResourceArn;
     /**
-     * The web ACL capacity units (WCUs) required for this rule group. WAF uses web ACL capacity units (WCU) to calculate and control the operating resources that are used to run your rules, rule groups, and web ACLs. WAF calculates capacity differently for each rule type, to reflect each rule's relative cost. Rule group capacity is fixed at creation, so users can plan their web ACL WCU usage when they use a rule group. The WCU limit for web ACLs is 1,500.
+     * The web ACL capacity units (WCUs) required for this rule group. WAF uses WCUs to calculate and control the operating resources that are used to run your rules, rule groups, and web ACLs. WAF calculates capacity differently for each rule type, to reflect the relative cost of each rule. Simple rules that cost little to run use fewer WCUs than more complex rules that use more processing power. Rule group capacity is fixed at creation, which helps users plan their web ACL WCU usage when they use a rule group. For more information, see WAF web ACL capacity units (WCU) in the WAF Developer Guide.
      */
     Capacity?: CapacityUnit;
     /**
@@ -973,7 +984,7 @@ declare namespace WAFV2 {
   }
   export interface DisassociateWebACLRequest {
     /**
-     * The Amazon Resource Name (ARN) of the resource to disassociate from the web ACL.  The ARN must be in one of the following formats:   For an Application Load Balancer: arn:aws:elasticloadbalancing:region:account-id:loadbalancer/app/load-balancer-name/load-balancer-id     For an Amazon API Gateway REST API: arn:aws:apigateway:region::/restapis/api-id/stages/stage-name     For an AppSync GraphQL API: arn:aws:appsync:region:account-id:apis/GraphQLApiId     For an Amazon Cognito user pool: arn:aws:cognito-idp:region:account-id:userpool/user-pool-id     For an App Runner service: arn:aws:apprunner:region:account-id:service/apprunner-service-name/apprunner-service-id
+     * The Amazon Resource Name (ARN) of the resource to disassociate from the web ACL.  The ARN must be in one of the following formats:   For an Application Load Balancer: arn:partition:elasticloadbalancing:region:account-id:loadbalancer/app/load-balancer-name/load-balancer-id     For an Amazon API Gateway REST API: arn:partition:apigateway:region::/restapis/api-id/stages/stage-name     For an AppSync GraphQL API: arn:partition:appsync:region:account-id:apis/GraphQLApiId     For an Amazon Cognito user pool: arn:partition:cognito-idp:region:account-id:userpool/user-pool-id     For an App Runner service: arn:partition:apprunner:region:account-id:service/apprunner-service-name/apprunner-service-id
      */
     ResourceArn: ResourceArn;
   }
@@ -1017,7 +1028,7 @@ declare namespace WAFV2 {
      */
     QueryString?: QueryString;
     /**
-     * Inspect the request body as plain text. The request body immediately follows the request headers. This is the part of a request that contains any additional data that you want to send to your web server as the HTTP request body, such as data from a form.  Only the first 8 KB (8192 bytes) of the request body are forwarded to WAF for inspection by the underlying host service. For information about how to handle oversized request bodies, see the Body object configuration.
+     * Inspect the request body as plain text. The request body immediately follows the request headers. This is the part of a request that contains any additional data that you want to send to your web server as the HTTP request body, such as data from a form.  A limited amount of the request body is forwarded to WAF for inspection by the underlying host service. For regional resources, the limit is 8 KB (8,192 kilobytes) and for CloudFront distributions, the limit is 16 KB (16,384 kilobytes). For CloudFront distributions, you can increase the limit in the web ACL's AssociationConfig, for additional processing fees.  For information about how to handle oversized request bodies, see the Body object configuration.
      */
     Body?: Body;
     /**
@@ -1025,7 +1036,7 @@ declare namespace WAFV2 {
      */
     Method?: Method;
     /**
-     * Inspect the request body as JSON. The request body immediately follows the request headers. This is the part of a request that contains any additional data that you want to send to your web server as the HTTP request body, such as data from a form.  Only the first 8 KB (8192 bytes) of the request body are forwarded to WAF for inspection by the underlying host service. For information about how to handle oversized request bodies, see the JsonBody object configuration.
+     * Inspect the request body as JSON. The request body immediately follows the request headers. This is the part of a request that contains any additional data that you want to send to your web server as the HTTP request body, such as data from a form.  A limited amount of the request body is forwarded to WAF for inspection by the underlying host service. For regional resources, the limit is 8 KB (8,192 kilobytes) and for CloudFront distributions, the limit is 16 KB (16,384 kilobytes). For CloudFront distributions, you can increase the limit in the web ACL's AssociationConfig, for additional processing fees.  For information about how to handle oversized request bodies, see the JsonBody object configuration.
      */
     JsonBody?: JsonBody;
     /**
@@ -1080,11 +1091,11 @@ declare namespace WAFV2 {
   export type FirewallManagerRuleGroups = FirewallManagerRuleGroup[];
   export interface FirewallManagerStatement {
     /**
-     * A rule statement used to run the rules that are defined in a managed rule group. To use this, provide the vendor name and the name of the rule group in this statement. You can retrieve the required names by calling ListAvailableManagedRuleGroups. You cannot nest a ManagedRuleGroupStatement, for example for use inside a NotStatement or OrStatement. It can only be referenced as a top-level statement within a rule.  You are charged additional fees when you use the WAF Bot Control managed rule group AWSManagedRulesBotControlRuleSet or the WAF Fraud Control account takeover prevention (ATP) managed rule group AWSManagedRulesATPRuleSet. For more information, see WAF Pricing.
+     * A statement used by Firewall Manager to run the rules that are defined in a managed rule group. This is managed by Firewall Manager for an Firewall Manager WAF policy.
      */
     ManagedRuleGroupStatement?: ManagedRuleGroupStatement;
     /**
-     * A rule statement used to run the rules that are defined in a RuleGroup. To use this, create a rule group with your rules, then provide the ARN of the rule group in this statement. You cannot nest a RuleGroupReferenceStatement, for example for use inside a NotStatement or OrStatement. You can only use a rule group reference statement at the top level inside a web ACL.
+     * A statement used by Firewall Manager to run the rules that are defined in a rule group. This is managed by Firewall Manager for an Firewall Manager WAF policy.
      */
     RuleGroupReferenceStatement?: RuleGroupReferenceStatement;
   }
@@ -1132,7 +1143,7 @@ declare namespace WAFV2 {
      */
     Name: EntityName;
     /**
-     * Specifies whether this is for an Amazon CloudFront distribution or for a regional application. A regional application can be an Application Load Balancer (ALB), an Amazon API Gateway REST API, an AppSync GraphQL API, a Amazon Cognito user pool, or an App Runner service.  To work with CloudFront, you must also specify the Region US East (N. Virginia) as follows:    CLI - Specify the Region when you use the CloudFront scope: --scope=CLOUDFRONT --region=us-east-1.    API and SDKs - For all calls, use the Region endpoint us-east-1.
+     * Specifies whether this is for an Amazon CloudFront distribution or for a regional application. A regional application can be an Application Load Balancer (ALB), an Amazon API Gateway REST API, an AppSync GraphQL API, an Amazon Cognito user pool, or an App Runner service.  To work with CloudFront, you must also specify the Region US East (N. Virginia) as follows:    CLI - Specify the Region when you use the CloudFront scope: --scope=CLOUDFRONT --region=us-east-1.    API and SDKs - For all calls, use the Region endpoint us-east-1.
      */
     Scope: Scope;
     /**
@@ -1168,7 +1179,7 @@ declare namespace WAFV2 {
      */
     Name: EntityName;
     /**
-     * Specifies whether this is for an Amazon CloudFront distribution or for a regional application. A regional application can be an Application Load Balancer (ALB), an Amazon API Gateway REST API, an AppSync GraphQL API, a Amazon Cognito user pool, or an App Runner service.  To work with CloudFront, you must also specify the Region US East (N. Virginia) as follows:    CLI - Specify the Region when you use the CloudFront scope: --scope=CLOUDFRONT --region=us-east-1.    API and SDKs - For all calls, use the Region endpoint us-east-1.
+     * Specifies whether this is for an Amazon CloudFront distribution or for a regional application. A regional application can be an Application Load Balancer (ALB), an Amazon API Gateway REST API, an AppSync GraphQL API, an Amazon Cognito user pool, or an App Runner service.  To work with CloudFront, you must also specify the Region US East (N. Virginia) as follows:    CLI - Specify the Region when you use the CloudFront scope: --scope=CLOUDFRONT --region=us-east-1.    API and SDKs - For all calls, use the Region endpoint us-east-1.
      */
     Scope: Scope;
     /**
@@ -1216,7 +1227,7 @@ declare namespace WAFV2 {
   }
   export interface GetRateBasedStatementManagedKeysRequest {
     /**
-     * Specifies whether this is for an Amazon CloudFront distribution or for a regional application. A regional application can be an Application Load Balancer (ALB), an Amazon API Gateway REST API, an AppSync GraphQL API, a Amazon Cognito user pool, or an App Runner service.  To work with CloudFront, you must also specify the Region US East (N. Virginia) as follows:    CLI - Specify the Region when you use the CloudFront scope: --scope=CLOUDFRONT --region=us-east-1.    API and SDKs - For all calls, use the Region endpoint us-east-1.
+     * Specifies whether this is for an Amazon CloudFront distribution or for a regional application. A regional application can be an Application Load Balancer (ALB), an Amazon API Gateway REST API, an AppSync GraphQL API, an Amazon Cognito user pool, or an App Runner service.  To work with CloudFront, you must also specify the Region US East (N. Virginia) as follows:    CLI - Specify the Region when you use the CloudFront scope: --scope=CLOUDFRONT --region=us-east-1.    API and SDKs - For all calls, use the Region endpoint us-east-1.
      */
     Scope: Scope;
     /**
@@ -1252,7 +1263,7 @@ declare namespace WAFV2 {
      */
     Name: EntityName;
     /**
-     * Specifies whether this is for an Amazon CloudFront distribution or for a regional application. A regional application can be an Application Load Balancer (ALB), an Amazon API Gateway REST API, an AppSync GraphQL API, a Amazon Cognito user pool, or an App Runner service.  To work with CloudFront, you must also specify the Region US East (N. Virginia) as follows:    CLI - Specify the Region when you use the CloudFront scope: --scope=CLOUDFRONT --region=us-east-1.    API and SDKs - For all calls, use the Region endpoint us-east-1.
+     * Specifies whether this is for an Amazon CloudFront distribution or for a regional application. A regional application can be an Application Load Balancer (ALB), an Amazon API Gateway REST API, an AppSync GraphQL API, an Amazon Cognito user pool, or an App Runner service.  To work with CloudFront, you must also specify the Region US East (N. Virginia) as follows:    CLI - Specify the Region when you use the CloudFront scope: --scope=CLOUDFRONT --region=us-east-1.    API and SDKs - For all calls, use the Region endpoint us-east-1.
      */
     Scope: Scope;
     /**
@@ -1276,7 +1287,7 @@ declare namespace WAFV2 {
      */
     Name?: EntityName;
     /**
-     * Specifies whether this is for an Amazon CloudFront distribution or for a regional application. A regional application can be an Application Load Balancer (ALB), an Amazon API Gateway REST API, an AppSync GraphQL API, a Amazon Cognito user pool, or an App Runner service.  To work with CloudFront, you must also specify the Region US East (N. Virginia) as follows:    CLI - Specify the Region when you use the CloudFront scope: --scope=CLOUDFRONT --region=us-east-1.    API and SDKs - For all calls, use the Region endpoint us-east-1.
+     * Specifies whether this is for an Amazon CloudFront distribution or for a regional application. A regional application can be an Application Load Balancer (ALB), an Amazon API Gateway REST API, an AppSync GraphQL API, an Amazon Cognito user pool, or an App Runner service.  To work with CloudFront, you must also specify the Region US East (N. Virginia) as follows:    CLI - Specify the Region when you use the CloudFront scope: --scope=CLOUDFRONT --region=us-east-1.    API and SDKs - For all calls, use the Region endpoint us-east-1.
      */
     Scope?: Scope;
     /**
@@ -1308,7 +1319,7 @@ declare namespace WAFV2 {
      */
     RuleMetricName: MetricName;
     /**
-     * Specifies whether this is for an Amazon CloudFront distribution or for a regional application. A regional application can be an Application Load Balancer (ALB), an Amazon API Gateway REST API, an AppSync GraphQL API, a Amazon Cognito user pool, or an App Runner service.  To work with CloudFront, you must also specify the Region US East (N. Virginia) as follows:    CLI - Specify the Region when you use the CloudFront scope: --scope=CLOUDFRONT --region=us-east-1.    API and SDKs - For all calls, use the Region endpoint us-east-1.
+     * Specifies whether this is for an Amazon CloudFront distribution or for a regional application. A regional application can be an Application Load Balancer (ALB), an Amazon API Gateway REST API, an AppSync GraphQL API, an Amazon Cognito user pool, or an App Runner service.  To work with CloudFront, you must also specify the Region US East (N. Virginia) as follows:    CLI - Specify the Region when you use the CloudFront scope: --scope=CLOUDFRONT --region=us-east-1.    API and SDKs - For all calls, use the Region endpoint us-east-1.
      */
     Scope: Scope;
     /**
@@ -1336,7 +1347,7 @@ declare namespace WAFV2 {
   }
   export interface GetWebACLForResourceRequest {
     /**
-     * The Amazon Resource Name (ARN) of the resource whose web ACL you want to retrieve.  The ARN must be in one of the following formats:   For an Application Load Balancer: arn:aws:elasticloadbalancing:region:account-id:loadbalancer/app/load-balancer-name/load-balancer-id     For an Amazon API Gateway REST API: arn:aws:apigateway:region::/restapis/api-id/stages/stage-name     For an AppSync GraphQL API: arn:aws:appsync:region:account-id:apis/GraphQLApiId     For an Amazon Cognito user pool: arn:aws:cognito-idp:region:account-id:userpool/user-pool-id     For an App Runner service: arn:aws:apprunner:region:account-id:service/apprunner-service-name/apprunner-service-id
+     * The Amazon Resource Name (ARN) of the resource whose web ACL you want to retrieve.  The ARN must be in one of the following formats:   For an Application Load Balancer: arn:partition:elasticloadbalancing:region:account-id:loadbalancer/app/load-balancer-name/load-balancer-id     For an Amazon API Gateway REST API: arn:partition:apigateway:region::/restapis/api-id/stages/stage-name     For an AppSync GraphQL API: arn:partition:appsync:region:account-id:apis/GraphQLApiId     For an Amazon Cognito user pool: arn:partition:cognito-idp:region:account-id:userpool/user-pool-id     For an App Runner service: arn:partition:apprunner:region:account-id:service/apprunner-service-name/apprunner-service-id
      */
     ResourceArn: ResourceArn;
   }
@@ -1352,7 +1363,7 @@ declare namespace WAFV2 {
      */
     Name: EntityName;
     /**
-     * Specifies whether this is for an Amazon CloudFront distribution or for a regional application. A regional application can be an Application Load Balancer (ALB), an Amazon API Gateway REST API, an AppSync GraphQL API, a Amazon Cognito user pool, or an App Runner service.  To work with CloudFront, you must also specify the Region US East (N. Virginia) as follows:    CLI - Specify the Region when you use the CloudFront scope: --scope=CLOUDFRONT --region=us-east-1.    API and SDKs - For all calls, use the Region endpoint us-east-1.
+     * Specifies whether this is for an Amazon CloudFront distribution or for a regional application. A regional application can be an Application Load Balancer (ALB), an Amazon API Gateway REST API, an AppSync GraphQL API, an Amazon Cognito user pool, or an App Runner service.  To work with CloudFront, you must also specify the Region US East (N. Virginia) as follows:    CLI - Specify the Region when you use the CloudFront scope: --scope=CLOUDFRONT --region=us-east-1.    API and SDKs - For all calls, use the Region endpoint us-east-1.
      */
     Scope: Scope;
     /**
@@ -1542,7 +1553,7 @@ declare namespace WAFV2 {
      */
     InvalidFallbackBehavior?: BodyParsingFallbackBehavior;
     /**
-     * What WAF should do if the body is larger than WAF can inspect. WAF does not support inspecting the entire contents of the body of a web request when the body exceeds 8 KB (8192 bytes). Only the first 8 KB of the request body are forwarded to WAF by the underlying host service.  The options for oversize handling are the following:    CONTINUE - Inspect the body normally, according to the rule inspection criteria.     MATCH - Treat the web request as matching the rule statement. WAF applies the rule action to the request.    NO_MATCH - Treat the web request as not matching the rule statement.   You can combine the MATCH or NO_MATCH settings for oversize handling with your rule and web ACL action settings, so that you block any request whose body is over 8 KB.  Default: CONTINUE
+     * What WAF should do if the body is larger than WAF can inspect. WAF does not support inspecting the entire contents of the web request body if the body exceeds the limit for the resource type. If the body is larger than the limit, the underlying host service only forwards the contents that are below the limit to WAF for inspection.  The default limit is 8 KB (8,192 kilobytes) for regional resources and 16 KB (16,384 kilobytes) for CloudFront distributions. For CloudFront distributions, you can increase the limit in the web ACL AssociationConfig, for additional processing fees.  The options for oversize handling are the following:    CONTINUE - Inspect the body normally, according to the rule inspection criteria.     MATCH - Treat the web request as matching the rule statement. WAF applies the rule action to the request.    NO_MATCH - Treat the web request as not matching the rule statement.   You can combine the MATCH or NO_MATCH settings for oversize handling with your rule and web ACL action settings, so that you block any request whose body is over the limit.  Default: CONTINUE
      */
     OversizeHandling?: OversizeHandling;
   }
@@ -1602,7 +1613,7 @@ declare namespace WAFV2 {
      */
     Name: EntityName;
     /**
-     * Specifies whether this is for an Amazon CloudFront distribution or for a regional application. A regional application can be an Application Load Balancer (ALB), an Amazon API Gateway REST API, an AppSync GraphQL API, a Amazon Cognito user pool, or an App Runner service.  To work with CloudFront, you must also specify the Region US East (N. Virginia) as follows:    CLI - Specify the Region when you use the CloudFront scope: --scope=CLOUDFRONT --region=us-east-1.    API and SDKs - For all calls, use the Region endpoint us-east-1.
+     * Specifies whether this is for an Amazon CloudFront distribution or for a regional application. A regional application can be an Application Load Balancer (ALB), an Amazon API Gateway REST API, an AppSync GraphQL API, an Amazon Cognito user pool, or an App Runner service.  To work with CloudFront, you must also specify the Region US East (N. Virginia) as follows:    CLI - Specify the Region when you use the CloudFront scope: --scope=CLOUDFRONT --region=us-east-1.    API and SDKs - For all calls, use the Region endpoint us-east-1.
      */
     Scope: Scope;
     /**
@@ -1630,7 +1641,7 @@ declare namespace WAFV2 {
   }
   export interface ListAvailableManagedRuleGroupsRequest {
     /**
-     * Specifies whether this is for an Amazon CloudFront distribution or for a regional application. A regional application can be an Application Load Balancer (ALB), an Amazon API Gateway REST API, an AppSync GraphQL API, a Amazon Cognito user pool, or an App Runner service.  To work with CloudFront, you must also specify the Region US East (N. Virginia) as follows:    CLI - Specify the Region when you use the CloudFront scope: --scope=CLOUDFRONT --region=us-east-1.    API and SDKs - For all calls, use the Region endpoint us-east-1.
+     * Specifies whether this is for an Amazon CloudFront distribution or for a regional application. A regional application can be an Application Load Balancer (ALB), an Amazon API Gateway REST API, an AppSync GraphQL API, an Amazon Cognito user pool, or an App Runner service.  To work with CloudFront, you must also specify the Region US East (N. Virginia) as follows:    CLI - Specify the Region when you use the CloudFront scope: --scope=CLOUDFRONT --region=us-east-1.    API and SDKs - For all calls, use the Region endpoint us-east-1.
      */
     Scope: Scope;
     /**
@@ -1654,7 +1665,7 @@ declare namespace WAFV2 {
   }
   export interface ListIPSetsRequest {
     /**
-     * Specifies whether this is for an Amazon CloudFront distribution or for a regional application. A regional application can be an Application Load Balancer (ALB), an Amazon API Gateway REST API, an AppSync GraphQL API, a Amazon Cognito user pool, or an App Runner service.  To work with CloudFront, you must also specify the Region US East (N. Virginia) as follows:    CLI - Specify the Region when you use the CloudFront scope: --scope=CLOUDFRONT --region=us-east-1.    API and SDKs - For all calls, use the Region endpoint us-east-1.
+     * Specifies whether this is for an Amazon CloudFront distribution or for a regional application. A regional application can be an Application Load Balancer (ALB), an Amazon API Gateway REST API, an AppSync GraphQL API, an Amazon Cognito user pool, or an App Runner service.  To work with CloudFront, you must also specify the Region US East (N. Virginia) as follows:    CLI - Specify the Region when you use the CloudFront scope: --scope=CLOUDFRONT --region=us-east-1.    API and SDKs - For all calls, use the Region endpoint us-east-1.
      */
     Scope: Scope;
     /**
@@ -1678,7 +1689,7 @@ declare namespace WAFV2 {
   }
   export interface ListLoggingConfigurationsRequest {
     /**
-     * Specifies whether this is for an Amazon CloudFront distribution or for a regional application. A regional application can be an Application Load Balancer (ALB), an Amazon API Gateway REST API, an AppSync GraphQL API, a Amazon Cognito user pool, or an App Runner service.  To work with CloudFront, you must also specify the Region US East (N. Virginia) as follows:    CLI - Specify the Region when you use the CloudFront scope: --scope=CLOUDFRONT --region=us-east-1.    API and SDKs - For all calls, use the Region endpoint us-east-1.
+     * Specifies whether this is for an Amazon CloudFront distribution or for a regional application. A regional application can be an Application Load Balancer (ALB), an Amazon API Gateway REST API, an AppSync GraphQL API, an Amazon Cognito user pool, or an App Runner service.  To work with CloudFront, you must also specify the Region US East (N. Virginia) as follows:    CLI - Specify the Region when you use the CloudFront scope: --scope=CLOUDFRONT --region=us-east-1.    API and SDKs - For all calls, use the Region endpoint us-east-1.
      */
     Scope: Scope;
     /**
@@ -1702,7 +1713,7 @@ declare namespace WAFV2 {
   }
   export interface ListManagedRuleSetsRequest {
     /**
-     * Specifies whether this is for an Amazon CloudFront distribution or for a regional application. A regional application can be an Application Load Balancer (ALB), an Amazon API Gateway REST API, an AppSync GraphQL API, a Amazon Cognito user pool, or an App Runner service.  To work with CloudFront, you must also specify the Region US East (N. Virginia) as follows:    CLI - Specify the Region when you use the CloudFront scope: --scope=CLOUDFRONT --region=us-east-1.    API and SDKs - For all calls, use the Region endpoint us-east-1.
+     * Specifies whether this is for an Amazon CloudFront distribution or for a regional application. A regional application can be an Application Load Balancer (ALB), an Amazon API Gateway REST API, an AppSync GraphQL API, an Amazon Cognito user pool, or an App Runner service.  To work with CloudFront, you must also specify the Region US East (N. Virginia) as follows:    CLI - Specify the Region when you use the CloudFront scope: --scope=CLOUDFRONT --region=us-east-1.    API and SDKs - For all calls, use the Region endpoint us-east-1.
      */
     Scope: Scope;
     /**
@@ -1751,7 +1762,7 @@ declare namespace WAFV2 {
   }
   export interface ListRegexPatternSetsRequest {
     /**
-     * Specifies whether this is for an Amazon CloudFront distribution or for a regional application. A regional application can be an Application Load Balancer (ALB), an Amazon API Gateway REST API, an AppSync GraphQL API, a Amazon Cognito user pool, or an App Runner service.  To work with CloudFront, you must also specify the Region US East (N. Virginia) as follows:    CLI - Specify the Region when you use the CloudFront scope: --scope=CLOUDFRONT --region=us-east-1.    API and SDKs - For all calls, use the Region endpoint us-east-1.
+     * Specifies whether this is for an Amazon CloudFront distribution or for a regional application. A regional application can be an Application Load Balancer (ALB), an Amazon API Gateway REST API, an AppSync GraphQL API, an Amazon Cognito user pool, or an App Runner service.  To work with CloudFront, you must also specify the Region US East (N. Virginia) as follows:    CLI - Specify the Region when you use the CloudFront scope: --scope=CLOUDFRONT --region=us-east-1.    API and SDKs - For all calls, use the Region endpoint us-east-1.
      */
     Scope: Scope;
     /**
@@ -1779,7 +1790,7 @@ declare namespace WAFV2 {
      */
     WebACLArn: ResourceArn;
     /**
-     * Used for web ACLs that are scoped for regional applications. A regional application can be an Application Load Balancer (ALB), an Amazon API Gateway REST API, an AppSync GraphQL API, a Amazon Cognito user pool, or an App Runner service.   If you don't provide a resource type, the call uses the resource type APPLICATION_LOAD_BALANCER.   Default: APPLICATION_LOAD_BALANCER
+     * Used for web ACLs that are scoped for regional applications. A regional application can be an Application Load Balancer (ALB), an Amazon API Gateway REST API, an AppSync GraphQL API, an Amazon Cognito user pool, or an App Runner service.   If you don't provide a resource type, the call uses the resource type APPLICATION_LOAD_BALANCER.   Default: APPLICATION_LOAD_BALANCER
      */
     ResourceType?: ResourceType;
   }
@@ -1791,7 +1802,7 @@ declare namespace WAFV2 {
   }
   export interface ListRuleGroupsRequest {
     /**
-     * Specifies whether this is for an Amazon CloudFront distribution or for a regional application. A regional application can be an Application Load Balancer (ALB), an Amazon API Gateway REST API, an AppSync GraphQL API, a Amazon Cognito user pool, or an App Runner service.  To work with CloudFront, you must also specify the Region US East (N. Virginia) as follows:    CLI - Specify the Region when you use the CloudFront scope: --scope=CLOUDFRONT --region=us-east-1.    API and SDKs - For all calls, use the Region endpoint us-east-1.
+     * Specifies whether this is for an Amazon CloudFront distribution or for a regional application. A regional application can be an Application Load Balancer (ALB), an Amazon API Gateway REST API, an AppSync GraphQL API, an Amazon Cognito user pool, or an App Runner service.  To work with CloudFront, you must also specify the Region US East (N. Virginia) as follows:    CLI - Specify the Region when you use the CloudFront scope: --scope=CLOUDFRONT --region=us-east-1.    API and SDKs - For all calls, use the Region endpoint us-east-1.
      */
     Scope: Scope;
     /**
@@ -1839,7 +1850,7 @@ declare namespace WAFV2 {
   }
   export interface ListWebACLsRequest {
     /**
-     * Specifies whether this is for an Amazon CloudFront distribution or for a regional application. A regional application can be an Application Load Balancer (ALB), an Amazon API Gateway REST API, an AppSync GraphQL API, a Amazon Cognito user pool, or an App Runner service.  To work with CloudFront, you must also specify the Region US East (N. Virginia) as follows:    CLI - Specify the Region when you use the CloudFront scope: --scope=CLOUDFRONT --region=us-east-1.    API and SDKs - For all calls, use the Region endpoint us-east-1.
+     * Specifies whether this is for an Amazon CloudFront distribution or for a regional application. A regional application can be an Application Load Balancer (ALB), an Amazon API Gateway REST API, an AppSync GraphQL API, an Amazon Cognito user pool, or an App Runner service.  To work with CloudFront, you must also specify the Region US East (N. Virginia) as follows:    CLI - Specify the Region when you use the CloudFront scope: --scope=CLOUDFRONT --region=us-east-1.    API and SDKs - For all calls, use the Region endpoint us-east-1.
      */
     Scope: Scope;
     /**
@@ -2047,7 +2058,7 @@ declare namespace WAFV2 {
      */
     AssociatedRuleGroupArn?: ResourceArn;
     /**
-     * The web ACL capacity units (WCUs) required for this rule group. WAF uses WCUs to calculate and control the operating resources that are used to run your rules, rule groups, and web ACLs. WAF calculates capacity differently for each rule type, to reflect the relative cost of each rule. Simple rules that cost little to run use fewer WCUs than more complex rules that use more processing power. Rule group capacity is fixed at creation, which helps users plan their web ACL WCU usage when they use a rule group. The WCU limit for web ACLs is 1,500.
+     * The web ACL capacity units (WCUs) required for this rule group. WAF uses WCUs to calculate and control the operating resources that are used to run your rules, rule groups, and web ACLs. WAF calculates capacity differently for each rule type, to reflect the relative cost of each rule. Simple rules that cost little to run use fewer WCUs than more complex rules that use more processing power. Rule group capacity is fixed at creation, which helps users plan their web ACL WCU usage when they use a rule group. For more information, see WAF web ACL capacity units (WCU) in the WAF Developer Guide.
      */
     Capacity?: CapacityUnit;
     /**
@@ -2147,7 +2158,7 @@ declare namespace WAFV2 {
      */
     Name: EntityName;
     /**
-     * Specifies whether this is for an Amazon CloudFront distribution or for a regional application. A regional application can be an Application Load Balancer (ALB), an Amazon API Gateway REST API, an AppSync GraphQL API, a Amazon Cognito user pool, or an App Runner service.  To work with CloudFront, you must also specify the Region US East (N. Virginia) as follows:    CLI - Specify the Region when you use the CloudFront scope: --scope=CLOUDFRONT --region=us-east-1.    API and SDKs - For all calls, use the Region endpoint us-east-1.
+     * Specifies whether this is for an Amazon CloudFront distribution or for a regional application. A regional application can be an Application Load Balancer (ALB), an Amazon API Gateway REST API, an AppSync GraphQL API, an Amazon Cognito user pool, or an App Runner service.  To work with CloudFront, you must also specify the Region US East (N. Virginia) as follows:    CLI - Specify the Region when you use the CloudFront scope: --scope=CLOUDFRONT --region=us-east-1.    API and SDKs - For all calls, use the Region endpoint us-east-1.
      */
     Scope: Scope;
     /**
@@ -2179,7 +2190,7 @@ declare namespace WAFV2 {
      */
     ResourceArn: ResourceArn;
     /**
-     * The policy to attach to the specified rule group.  The policy specifications must conform to the following:   The policy must be composed using IAM Policy version 2012-10-17 or version 2015-01-01.   The policy must include specifications for Effect, Action, and Principal.    Effect must specify Allow.    Action must specify wafv2:CreateWebACL, wafv2:UpdateWebACL, and wafv2:PutFirewallManagerRuleGroups and may optionally specify wafv2:GetRuleGroup. WAF rejects any extra actions or wildcard actions in the policy.   The policy must not include a Resource parameter.   For more information, see IAM Policies.
+     * The policy to attach to the specified rule group.  The policy specifications must conform to the following:   The policy must be composed using IAM Policy version 2012-10-17.   The policy must include specifications for Effect, Action, and Principal.    Effect must specify Allow.    Action must specify wafv2:CreateWebACL, wafv2:UpdateWebACL, and wafv2:PutFirewallManagerRuleGroups and may optionally specify wafv2:GetRuleGroup. WAF rejects any extra actions or wildcard actions in the policy.   The policy must not include a Resource parameter.   For more information, see IAM Policies.
      */
     Policy: PolicyString;
   }
@@ -2311,6 +2322,13 @@ declare namespace WAFV2 {
      */
     Timestamp?: Timestamp;
   }
+  export type RequestBody = {[key: string]: RequestBodyAssociatedResourceTypeConfig};
+  export interface RequestBodyAssociatedResourceTypeConfig {
+    /**
+     * Specifies the maximum size of the web request body component that an associated CloudFront distribution should send to WAF for inspection. This applies to statements in the web ACL that inspect the body or JSON body.  Default: 16 KB (16,384 kilobytes)
+     */
+    DefaultSizeInspectionLimit: SizeInspectionLimit;
+  }
   export interface RequestInspection {
     /**
      * The payload type for your login endpoint, either JSON or form encoded.
@@ -2488,7 +2506,7 @@ declare namespace WAFV2 {
      */
     Id: EntityId;
     /**
-     * The web ACL capacity units (WCUs) required for this rule group. When you create your own rule group, you define this, and you cannot change it after creation. When you add or modify the rules in a rule group, WAF enforces this limit. You can check the capacity for a set of rules using CheckCapacity. WAF uses WCUs to calculate and control the operating resources that are used to run your rules, rule groups, and web ACLs. WAF calculates capacity differently for each rule type, to reflect the relative cost of each rule. Simple rules that cost little to run use fewer WCUs than more complex rules that use more processing power. Rule group capacity is fixed at creation, which helps users plan their web ACL WCU usage when they use a rule group. The WCU limit for web ACLs is 1,500.
+     * The web ACL capacity units (WCUs) required for this rule group. When you create your own rule group, you define this, and you cannot change it after creation. When you add or modify the rules in a rule group, WAF enforces this limit. You can check the capacity for a set of rules using CheckCapacity. WAF uses WCUs to calculate and control the operating resources that are used to run your rules, rule groups, and web ACLs. WAF calculates capacity differently for each rule type, to reflect the relative cost of each rule. Simple rules that cost little to run use fewer WCUs than more complex rules that use more processing power. Rule group capacity is fixed at creation, which helps users plan their web ACL WCU usage when they use a rule group. For more information, see WAF web ACL capacity units (WCU) in the WAF Developer Guide.
      */
     Capacity: CapacityUnit;
     /**
@@ -2657,6 +2675,7 @@ declare namespace WAFV2 {
      */
     TextTransformations: TextTransformations;
   }
+  export type SizeInspectionLimit = "KB_16"|"KB_32"|"KB_48"|"KB_64"|string;
   export type SolveTimestamp = number;
   export interface SqliMatchStatement {
     /**
@@ -2686,7 +2705,7 @@ declare namespace WAFV2 {
      */
     XssMatchStatement?: XssMatchStatement;
     /**
-     * A rule statement that compares a number of bytes against the size of a request component, using a comparison operator, such as greater than (&gt;) or less than (&lt;). For example, you can use a size constraint statement to look for query strings that are longer than 100 bytes.  If you configure WAF to inspect the request body, WAF inspects only the first 8192 bytes (8 KB). If the request body for your web requests never exceeds 8192 bytes, you could use a size constraint statement to block requests that have a request body greater than 8192 bytes. If you choose URI for the value of Part of the request to filter on, the slash (/) in the URI counts as one character. For example, the URI /logo.jpg is nine characters long.
+     * A rule statement that compares a number of bytes against the size of a request component, using a comparison operator, such as greater than (&gt;) or less than (&lt;). For example, you can use a size constraint statement to look for query strings that are longer than 100 bytes.  If you configure WAF to inspect the request body, WAF inspects only the number of bytes of the body up to the limit for the web ACL. By default, for regional web ACLs, this limit is 8 KB (8,192 kilobytes) and for CloudFront web ACLs, this limit is 16 KB (16,384 kilobytes). For CloudFront web ACLs, you can increase the limit in the web ACL AssociationConfig, for additional fees. If you know that the request body for your web requests should never exceed the inspection limit, you could use a size constraint statement to block requests that have a larger request body size. If you choose URI for the value of Part of the request to filter on, the slash (/) in the URI counts as one character. For example, the URI /logo.jpg is nine characters long.
      */
     SizeConstraintStatement?: SizeConstraintStatement;
     /**
@@ -2821,7 +2840,7 @@ declare namespace WAFV2 {
      */
     Name: EntityName;
     /**
-     * Specifies whether this is for an Amazon CloudFront distribution or for a regional application. A regional application can be an Application Load Balancer (ALB), an Amazon API Gateway REST API, an AppSync GraphQL API, a Amazon Cognito user pool, or an App Runner service.  To work with CloudFront, you must also specify the Region US East (N. Virginia) as follows:    CLI - Specify the Region when you use the CloudFront scope: --scope=CLOUDFRONT --region=us-east-1.    API and SDKs - For all calls, use the Region endpoint us-east-1.
+     * Specifies whether this is for an Amazon CloudFront distribution or for a regional application. A regional application can be an Application Load Balancer (ALB), an Amazon API Gateway REST API, an AppSync GraphQL API, an Amazon Cognito user pool, or an App Runner service.  To work with CloudFront, you must also specify the Region US East (N. Virginia) as follows:    CLI - Specify the Region when you use the CloudFront scope: --scope=CLOUDFRONT --region=us-east-1.    API and SDKs - For all calls, use the Region endpoint us-east-1.
      */
     Scope: Scope;
     /**
@@ -2853,7 +2872,7 @@ declare namespace WAFV2 {
      */
     Name: EntityName;
     /**
-     * Specifies whether this is for an Amazon CloudFront distribution or for a regional application. A regional application can be an Application Load Balancer (ALB), an Amazon API Gateway REST API, an AppSync GraphQL API, a Amazon Cognito user pool, or an App Runner service.  To work with CloudFront, you must also specify the Region US East (N. Virginia) as follows:    CLI - Specify the Region when you use the CloudFront scope: --scope=CLOUDFRONT --region=us-east-1.    API and SDKs - For all calls, use the Region endpoint us-east-1.
+     * Specifies whether this is for an Amazon CloudFront distribution or for a regional application. A regional application can be an Application Load Balancer (ALB), an Amazon API Gateway REST API, an AppSync GraphQL API, an Amazon Cognito user pool, or an App Runner service.  To work with CloudFront, you must also specify the Region US East (N. Virginia) as follows:    CLI - Specify the Region when you use the CloudFront scope: --scope=CLOUDFRONT --region=us-east-1.    API and SDKs - For all calls, use the Region endpoint us-east-1.
      */
     Scope: Scope;
     /**
@@ -2893,7 +2912,7 @@ declare namespace WAFV2 {
      */
     Name: EntityName;
     /**
-     * Specifies whether this is for an Amazon CloudFront distribution or for a regional application. A regional application can be an Application Load Balancer (ALB), an Amazon API Gateway REST API, an AppSync GraphQL API, a Amazon Cognito user pool, or an App Runner service.  To work with CloudFront, you must also specify the Region US East (N. Virginia) as follows:    CLI - Specify the Region when you use the CloudFront scope: --scope=CLOUDFRONT --region=us-east-1.    API and SDKs - For all calls, use the Region endpoint us-east-1.
+     * Specifies whether this is for an Amazon CloudFront distribution or for a regional application. A regional application can be an Application Load Balancer (ALB), an Amazon API Gateway REST API, an AppSync GraphQL API, an Amazon Cognito user pool, or an App Runner service.  To work with CloudFront, you must also specify the Region US East (N. Virginia) as follows:    CLI - Specify the Region when you use the CloudFront scope: --scope=CLOUDFRONT --region=us-east-1.    API and SDKs - For all calls, use the Region endpoint us-east-1.
      */
     Scope: Scope;
     /**
@@ -2925,7 +2944,7 @@ declare namespace WAFV2 {
      */
     Name: EntityName;
     /**
-     * Specifies whether this is for an Amazon CloudFront distribution or for a regional application. A regional application can be an Application Load Balancer (ALB), an Amazon API Gateway REST API, an AppSync GraphQL API, a Amazon Cognito user pool, or an App Runner service.  To work with CloudFront, you must also specify the Region US East (N. Virginia) as follows:    CLI - Specify the Region when you use the CloudFront scope: --scope=CLOUDFRONT --region=us-east-1.    API and SDKs - For all calls, use the Region endpoint us-east-1.
+     * Specifies whether this is for an Amazon CloudFront distribution or for a regional application. A regional application can be an Application Load Balancer (ALB), an Amazon API Gateway REST API, an AppSync GraphQL API, an Amazon Cognito user pool, or an App Runner service.  To work with CloudFront, you must also specify the Region US East (N. Virginia) as follows:    CLI - Specify the Region when you use the CloudFront scope: --scope=CLOUDFRONT --region=us-east-1.    API and SDKs - For all calls, use the Region endpoint us-east-1.
      */
     Scope: Scope;
     /**
@@ -2965,7 +2984,7 @@ declare namespace WAFV2 {
      */
     Name: EntityName;
     /**
-     * Specifies whether this is for an Amazon CloudFront distribution or for a regional application. A regional application can be an Application Load Balancer (ALB), an Amazon API Gateway REST API, an AppSync GraphQL API, a Amazon Cognito user pool, or an App Runner service.  To work with CloudFront, you must also specify the Region US East (N. Virginia) as follows:    CLI - Specify the Region when you use the CloudFront scope: --scope=CLOUDFRONT --region=us-east-1.    API and SDKs - For all calls, use the Region endpoint us-east-1.
+     * Specifies whether this is for an Amazon CloudFront distribution or for a regional application. A regional application can be an Application Load Balancer (ALB), an Amazon API Gateway REST API, an AppSync GraphQL API, an Amazon Cognito user pool, or an App Runner service.  To work with CloudFront, you must also specify the Region US East (N. Virginia) as follows:    CLI - Specify the Region when you use the CloudFront scope: --scope=CLOUDFRONT --region=us-east-1.    API and SDKs - For all calls, use the Region endpoint us-east-1.
      */
     Scope: Scope;
     /**
@@ -3008,6 +3027,10 @@ declare namespace WAFV2 {
      * Specifies the domains that WAF should accept in a web request token. This enables the use of tokens across multiple protected websites. When WAF provides a token, it uses the domain of the Amazon Web Services resource that the web ACL is protecting. If you don't specify a list of token domains, WAF accepts tokens only for the domain of the protected resource. With a token domain list, WAF accepts the resource's host domain plus all domains in the token domain list, including their prefixed subdomains. Example JSON: "TokenDomains": { "mywebsite.com", "myotherwebsite.com" }  Public suffixes aren't allowed. For example, you can't use usa.gov or co.uk as token domains.
      */
     TokenDomains?: TokenDomains;
+    /**
+     * Specifies custom configurations for the associations between the web ACL and protected resources.  Use this to customize the maximum size of the request body that your protected CloudFront distributions forward to WAF for inspection. The default is 16 KB (16,384 kilobytes).   You are charged additional fees when your protected resources forward body sizes that are larger than the default. For more information, see WAF Pricing.
+     */
+    AssociationConfig?: AssociationConfig;
   }
   export interface UpdateWebACLResponse {
     /**
@@ -3042,7 +3065,7 @@ declare namespace WAFV2 {
      */
     SampledRequestsEnabled: Boolean;
     /**
-     * A boolean indicating whether the associated resource sends metrics to Amazon CloudWatch. For the list of available metrics, see WAF Metrics.
+     * A boolean indicating whether the associated resource sends metrics to Amazon CloudWatch. For the list of available metrics, see WAF Metrics in the WAF Developer Guide.
      */
     CloudWatchMetricsEnabled: Boolean;
     /**
@@ -3080,7 +3103,7 @@ declare namespace WAFV2 {
      */
     VisibilityConfig: VisibilityConfig;
     /**
-     * The web ACL capacity units (WCUs) currently being used by this web ACL.  WAF uses WCUs to calculate and control the operating resources that are used to run your rules, rule groups, and web ACLs. WAF calculates capacity differently for each rule type, to reflect the relative cost of each rule. Simple rules that cost little to run use fewer WCUs than more complex rules that use more processing power. Rule group capacity is fixed at creation, which helps users plan their web ACL WCU usage when they use a rule group. The WCU limit for web ACLs is 1,500.
+     * The web ACL capacity units (WCUs) currently being used by this web ACL.  WAF uses WCUs to calculate and control the operating resources that are used to run your rules, rule groups, and web ACLs. WAF calculates capacity differently for each rule type, to reflect the relative cost of each rule. Simple rules that cost little to run use fewer WCUs than more complex rules that use more processing power. Rule group capacity is fixed at creation, which helps users plan their web ACL WCU usage when they use a rule group. For more information, see WAF web ACL capacity units (WCU) in the WAF Developer Guide.
      */
     Capacity?: ConsumedCapacity;
     /**
@@ -3115,6 +3138,10 @@ declare namespace WAFV2 {
      * Specifies the domains that WAF should accept in a web request token. This enables the use of tokens across multiple protected websites. When WAF provides a token, it uses the domain of the Amazon Web Services resource that the web ACL is protecting. If you don't specify a list of token domains, WAF accepts tokens only for the domain of the protected resource. With a token domain list, WAF accepts the resource's host domain plus all domains in the token domain list, including their prefixed subdomains.
      */
     TokenDomains?: TokenDomains;
+    /**
+     * Specifies custom configurations for the associations between the web ACL and protected resources.  Use this to customize the maximum size of the request body that your protected CloudFront distributions forward to WAF for inspection. The default is 16 KB (16,384 kilobytes).   You are charged additional fees when your protected resources forward body sizes that are larger than the default. For more information, see WAF Pricing.
+     */
+    AssociationConfig?: AssociationConfig;
   }
   export type WebACLSummaries = WebACLSummary[];
   export interface WebACLSummary {