cc-devflow 4.3.0 → 4.4.1

package/.claude/skills/flow-spec/scripts/exit-gate.sh

@@ -1,244 +0,0 @@
-#!/bin/bash
-# ============================================================================
-# flow-spec Exit Gate
-# ============================================================================
-# [INPUT]: REQ_ID, 生成的文件列表
-# [OUTPUT]: 验证结果 (exit code 0=pass, 1=fail)
-# [POS]: flow-spec 的出口检查，验证所有输出文件
-# [PROTOCOL]: 变更时更新此头部，然后检查 CLAUDE.md
-# ============================================================================
-
-set -euo pipefail
-
-# ============================================================================
-# 参数解析
-# ============================================================================
-
-REQ_ID=""
-SKIP_TECH=false
-SKIP_UI=false
-
-while [[ $# -gt 0 ]]; do
-    case $1 in
-        --skip-tech)
-            SKIP_TECH=true
-            shift
-            ;;
-        --skip-ui)
-            SKIP_UI=true
-            shift
-            ;;
-        *)
-            if [[ -z "$REQ_ID" ]]; then
-                REQ_ID="$1"
-            fi
-            shift
-            ;;
-    esac
-done
-
-if [[ -z "$REQ_ID" ]]; then
-    echo "ERROR: REQ_ID required"
-    exit 1
-fi
-
-# ============================================================================
-# 路径定义
-# ============================================================================
-
-REQ_DIR="devflow/requirements/${REQ_ID}"
-PRD_FILE="${REQ_DIR}/PRD.md"
-TECH_FILE="${REQ_DIR}/TECH_DESIGN.md"
-UI_FILE="${REQ_DIR}/UI_PROTOTYPE.html"
-EPIC_FILE="${REQ_DIR}/EPIC.md"
-TASKS_FILE="${REQ_DIR}/TASKS.md"
-STATUS_FILE="${REQ_DIR}/orchestration_status.json"
-
-ERRORS=()
-WARNINGS=()
-
-# ============================================================================
-# 检查 1: PRD.md
-# ============================================================================
-
-echo "Checking PRD.md..."
-
-if [[ ! -f "$PRD_FILE" ]]; then
-    ERRORS+=("PRD.md not found")
-else
-    # 检查 placeholder
-    if grep -qE '\{\{[A-Z_]+\}\}' "$PRD_FILE"; then
-        ERRORS+=("PRD.md contains {{PLACEHOLDER}} markers")
-    fi
-    echo "✓ PRD.md exists and valid"
-fi
-
-# ============================================================================
-# 检查 2: TECH_DESIGN.md (如果未跳过)
-# ============================================================================
-
-if [[ "$SKIP_TECH" == "false" ]]; then
-    echo "Checking TECH_DESIGN.md..."
-
-    if [[ ! -f "$TECH_FILE" ]]; then
-        ERRORS+=("TECH_DESIGN.md not found (use --skip-tech to skip)")
-    else
-        if grep -qE '\{\{[A-Z_]+\}\}' "$TECH_FILE"; then
-            ERRORS+=("TECH_DESIGN.md contains {{PLACEHOLDER}} markers")
-        fi
-
-        # 检查必需章节
-        if ! grep -q "## 1. System Architecture" "$TECH_FILE"; then
-            WARNINGS+=("TECH_DESIGN.md missing System Architecture section")
-        fi
-        if ! grep -q "## 4. API Design" "$TECH_FILE"; then
-            WARNINGS+=("TECH_DESIGN.md missing API Design section")
-        fi
-
-        echo "✓ TECH_DESIGN.md exists"
-    fi
-else
-    echo "⊘ TECH_DESIGN.md skipped"
-fi
-
-# ============================================================================
-# 检查 3: UI_PROTOTYPE.html (如果未跳过)
-# ============================================================================
-
-if [[ "$SKIP_UI" == "false" ]]; then
-    echo "Checking UI_PROTOTYPE.html..."
-
-    # 检查 PRD 是否有 UI 关键词
-    HAS_UI_KEYWORDS=false
-    if [[ -f "$PRD_FILE" ]]; then
-        if grep -qiE '用户界面|前端|页面|交互|UI|界面设计' "$PRD_FILE"; then
-            HAS_UI_KEYWORDS=true
-        fi
-    fi
-
-    if [[ "$HAS_UI_KEYWORDS" == "true" ]]; then
-        if [[ ! -f "$UI_FILE" ]]; then
-            WARNINGS+=("UI_PROTOTYPE.html not found but PRD contains UI keywords")
-        else
-            echo "✓ UI_PROTOTYPE.html exists"
-        fi
-    else
-        echo "⊘ UI_PROTOTYPE.html not required (no UI keywords in PRD)"
-    fi
-else
-    echo "⊘ UI_PROTOTYPE.html skipped"
-fi
-
-# ============================================================================
-# 检查 4: EPIC.md
-# ============================================================================
-
-echo "Checking EPIC.md..."
-
-if [[ ! -f "$EPIC_FILE" ]]; then
-    ERRORS+=("EPIC.md not found")
-else
-    if grep -qE '\{\{[A-Z_]+\}\}' "$EPIC_FILE"; then
-        ERRORS+=("EPIC.md contains {{PLACEHOLDER}} markers")
-    fi
-    echo "✓ EPIC.md exists and valid"
-fi
-
-# ============================================================================
-# 检查 5: TASKS.md
-# ============================================================================
-
-echo "Checking TASKS.md..."
-
-if [[ ! -f "$TASKS_FILE" ]]; then
-    ERRORS+=("TASKS.md not found")
-else
-    if grep -qE '\{\{[A-Z_]+\}\}' "$TASKS_FILE"; then
-        ERRORS+=("TASKS.md contains {{PLACEHOLDER}} markers")
-    fi
-
-    # 检查 TDD 顺序: Phase 2 (Tests) 应该在 Phase 3 (Implementation) 之前
-    PHASE2_LINE=$(grep -n "Phase 2" "$TASKS_FILE" | head -1 | cut -d: -f1 || echo "0")
-    PHASE3_LINE=$(grep -n "Phase 3" "$TASKS_FILE" | head -1 | cut -d: -f1 || echo "0")
-
-    if [[ "$PHASE2_LINE" -gt 0 && "$PHASE3_LINE" -gt 0 ]]; then
-        if [[ "$PHASE2_LINE" -gt "$PHASE3_LINE" ]]; then
-            ERRORS+=("TASKS.md TDD order incorrect: Phase 2 (Tests) should come before Phase 3 (Implementation)")
-        else
-            echo "✓ TASKS.md TDD order correct"
-        fi
-    fi
-
-    echo "✓ TASKS.md exists"
-fi
-
-# ============================================================================
-# 更新状态
-# ============================================================================
-
-if [[ ${#ERRORS[@]} -eq 0 ]]; then
-    echo "Updating orchestration_status.json..."
-
-    # 构建输出文件列表
-    OUTPUTS='["PRD.md", "EPIC.md", "TASKS.md"'
-    if [[ "$SKIP_TECH" == "false" && -f "$TECH_FILE" ]]; then
-        OUTPUTS+=', "TECH_DESIGN.md"'
-    fi
-    if [[ "$SKIP_UI" == "false" && -f "$UI_FILE" ]]; then
-        OUTPUTS+=', "UI_PROTOTYPE.html"'
-    fi
-    OUTPUTS+=']'
-
-    # 更新状态文件
-    if [[ -f "$STATUS_FILE" ]]; then
-        jq --arg status "spec_complete" \
-           --arg phase "spec" \
-           --argjson outputs "$OUTPUTS" \
-           '.status = $status | .phase = $phase | .outputs = $outputs | .updated_at = now | .spec_completed_at = now' \
-           "$STATUS_FILE" > "${STATUS_FILE}.tmp" && mv "${STATUS_FILE}.tmp" "$STATUS_FILE"
-    fi
-
-    echo "✓ Status updated to spec_complete"
-fi
-
-# ============================================================================
-# 输出结果
-# ============================================================================
-
-echo ""
-echo "============================================"
-
-if [[ ${#ERRORS[@]} -gt 0 ]]; then
-    echo "Exit Gate FAILED"
-    echo "============================================"
-    echo ""
-    echo "ERRORS:"
-    for err in "${ERRORS[@]}"; do
-        echo "  ✗ $err"
-    done
-fi
-
-if [[ ${#WARNINGS[@]} -gt 0 ]]; then
-    echo ""
-    echo "WARNINGS:"
-    for warn in "${WARNINGS[@]}"; do
-        echo "  ⚠ $warn"
-    done
-fi
-
-if [[ ${#ERRORS[@]} -eq 0 ]]; then
-    echo "Exit Gate PASSED"
-    echo "============================================"
-    echo ""
-    echo "Generated files:"
-    echo "  - PRD.md"
-    [[ "$SKIP_TECH" == "false" && -f "$TECH_FILE" ]] && echo "  - TECH_DESIGN.md"
-    [[ "$SKIP_UI" == "false" && -f "$UI_FILE" ]] && echo "  - UI_PROTOTYPE.html"
-    echo "  - EPIC.md"
-    echo "  - TASKS.md"
-    echo ""
-    echo "Next step: /flow-dev \"$REQ_ID\""
-    exit 0
-else
-    exit 1
-fi

package/.claude/skills/flow-spec/scripts/parallel-orchestrator.sh

@@ -1,205 +0,0 @@
-#!/bin/bash
-# ============================================================================
-# flow-spec Parallel Orchestrator
-# ============================================================================
-# [INPUT]: REQ_ID, 模式标志
-# [OUTPUT]: 并行执行状态
-# [POS]: 协调 tech-architect 和 ui-designer 的并行执行
-# [PROTOCOL]: 变更时更新此头部，然后检查 CLAUDE.md
-# ============================================================================
-
-# 注意: 此脚本主要用于文档目的
-# 实际的并行执行由 Claude 的 Task tool 处理
-# 此脚本提供执行逻辑的参考实现
-
-set -euo pipefail
-
-# ============================================================================
-# 参数解析
-# ============================================================================
-
-REQ_ID=""
-SKIP_TECH=false
-SKIP_UI=false
-
-while [[ $# -gt 0 ]]; do
-    case $1 in
-        --skip-tech)
-            SKIP_TECH=true
-            shift
-            ;;
-        --skip-ui)
-            SKIP_UI=true
-            shift
-            ;;
-        *)
-            if [[ -z "$REQ_ID" ]]; then
-                REQ_ID="$1"
-            fi
-            shift
-            ;;
-    esac
-done
-
-if [[ -z "$REQ_ID" ]]; then
-    echo "ERROR: REQ_ID required"
-    exit 1
-fi
-
-# ============================================================================
-# 路径定义
-# ============================================================================
-
-REQ_DIR="devflow/requirements/${REQ_ID}"
-PRD_FILE="${REQ_DIR}/PRD.md"
-EXECUTION_LOG="${REQ_DIR}/EXECUTION_LOG.md"
-
-# ============================================================================
-# 并行执行逻辑 (伪代码)
-# ============================================================================
-
-cat << 'EOF'
-============================================
-Parallel Orchestration Logic
-============================================
-
-This script documents the parallel execution strategy.
-Actual execution is handled by Claude's Task tool.
-
-Execution Flow:
----------------
-
-1. PRD Generation (Sequential - Must complete first)
-   Agent: prd-writer
-   Output: PRD.md
-
-2. Parallel Execution (After PRD completes)
-
-   ┌─────────────────────────────────────────────────────┐
-   │                                                     │
-   │  ┌─────────────────┐    ┌─────────────────┐        │
-   │  │ tech-architect  │    │  ui-designer    │        │
-   │  │                 │    │                 │        │
-   │  │ Condition:      │    │ Condition:      │        │
-   │  │ !--skip-tech    │    │ !--skip-ui AND  │        │
-   │  │                 │    │ UI keywords in  │        │
-   │  │                 │    │ PRD             │        │
-   │  │                 │    │                 │        │
-   │  │ Output:         │    │ Output:         │        │
-   │  │ - TECH_DESIGN   │    │ - UI_PROTOTYPE  │        │
-   │  │ - data-model    │    │ - ui_design_    │        │
-   │  │ - contracts/    │    │   strategy.md   │        │
-   │  └────────┬────────┘    └────────┬────────┘        │
-   │           │                      │                 │
-   │           └──────────┬───────────┘                 │
-   │                      │                             │
-   │                      ▼                             │
-   │              Wait for both                         │
-   │                                                    │
-   └─────────────────────────────────────────────────────┘
-
-3. Epic Generation (After parallel stage completes)
-   Agent: planner
-   Input: PRD.md + TECH_DESIGN.md (optional) + UI_PROTOTYPE.html (optional)
-   Output: EPIC.md + TASKS.md
-
-Claude Task Tool Usage:
------------------------
-
-// Stage 2: Parallel execution
-const tasks = [];
-
-if (!skipTech) {
-  tasks.push(Task({
-    subagent_type: "tech-architect",
-    prompt: `Generate TECH_DESIGN.md for ${REQ_ID}`,
-    description: "Tech design generation"
-  }));
-}
-
-if (!skipUI && hasUIKeywords) {
-  tasks.push(Task({
-    subagent_type: "ui-designer",
-    prompt: `Generate UI_PROTOTYPE.html for ${REQ_ID}`,
-    description: "UI prototype generation"
-  }));
-}
-
-// Execute in parallel
-await Promise.all(tasks);
-
-Error Handling:
----------------
-
-- If tech-architect fails: Continue with UI, mark tech as skipped
-- If ui-designer fails: Continue without UI, mark ui as skipped
-- If both fail: Log error, status = spec_failed
-
-Timing Expectations:
---------------------
-
-| Stage | Duration | Notes |
-|-------|----------|-------|
-| PRD   | 2-3 min  | Sequential |
-| Tech  | 2-3 min  | Parallel |
-| UI    | 2-3 min  | Parallel |
-| Epic  | 2-3 min  | Sequential |
-| Total | 5-8 min  | With parallelization |
-
-Without parallelization: 8-12 min
-Improvement: ~35% time reduction
-
-============================================
-EOF
-
-# ============================================================================
-# 检测 UI 关键词
-# ============================================================================
-
-echo ""
-echo "Checking PRD for UI keywords..."
-
-if [[ -f "$PRD_FILE" ]]; then
-    if grep -qiE '用户界面|前端|页面|交互|UI|界面设计|Web页面' "$PRD_FILE"; then
-        echo "✓ UI keywords detected in PRD"
-        echo "  ui-designer will be invoked (unless --skip-ui)"
-    else
-        echo "⊘ No UI keywords in PRD"
-        echo "  ui-designer will be skipped"
-    fi
-else
-    echo "✗ PRD.md not found"
-fi
-
-# ============================================================================
-# 输出执行计划
-# ============================================================================
-
-echo ""
-echo "============================================"
-echo "Execution Plan for $REQ_ID"
-echo "============================================"
-echo ""
-echo "Stage 1: PRD Generation"
-echo "  Agent: prd-writer"
-echo "  Status: Pending"
-echo ""
-echo "Stage 2: Parallel Execution"
-if [[ "$SKIP_TECH" == "false" ]]; then
-    echo "  [A] tech-architect: Enabled"
-else
-    echo "  [A] tech-architect: Skipped (--skip-tech)"
-fi
-if [[ "$SKIP_UI" == "false" ]]; then
-    echo "  [B] ui-designer: Enabled (if UI keywords)"
-else
-    echo "  [B] ui-designer: Skipped (--skip-ui)"
-fi
-echo ""
-echo "Stage 3: Epic Generation"
-echo "  Agent: planner"
-echo "  Status: Pending"
-echo ""
-echo "============================================"
-
-exit 0