bruce-models 1.1.6 → 1.1.7

package/dist/bruce-models.es5.js

@@ -1966,6 +1966,182 @@ var Calculator;
     Calculator.GetInputValue = GetInputValue;
 })(Calculator || (Calculator = {}));
 
+/**
+ * Describes vector geometry that Bruce uses.
+ */
+var Geometry;
+(function (Geometry) {
+    let EPolygonRingType;
+    (function (EPolygonRingType) {
+        EPolygonRingType["Boundaries"] = "out";
+        EPolygonRingType["Hole"] = "in";
+    })(EPolygonRingType = Geometry.EPolygonRingType || (Geometry.EPolygonRingType = {}));
+    /**
+     * Turns an array of points into string vector geometry that Bruce can use.
+     * This is used for saving polyline and polygon data.
+     * @param points
+     * @returns
+     */
+    function LineStrFromPoints(points) {
+        if (!points.length) {
+            throw ("points is empty.");
+        }
+        let carto = points[0];
+        let lineString = `${carto.longitude},${carto.latitude}` + (carto.altitude != null ? `,${carto.altitude}` : "");
+        for (let i = 1; i < points.length; i++) {
+            carto = points[i];
+            lineString += ` ${carto.longitude},${carto.latitude}` + (carto.altitude != null ? `,${carto.altitude}` : "");
+        }
+        return lineString;
+    }
+    Geometry.LineStrFromPoints = LineStrFromPoints;
+    /**
+     * Removes same points that occur in a row.
+     * This will not modify the original array.
+     * @param positions
+     * @returns
+     */
+    function RemoveRepeatPoints(positions) {
+        const filteredList = [];
+        for (let i = 0; i < positions.length; i++) {
+            const pos = positions[i];
+            const lastPos = filteredList.length > 0 ? filteredList[filteredList.length - 1] : null;
+            if (!lastPos || (pos.latitude != lastPos.latitude || pos.longitude != lastPos.longitude || pos.altitude != lastPos.altitude)) {
+                filteredList.push(pos);
+            }
+        }
+        return filteredList;
+    }
+    Geometry.RemoveRepeatPoints = RemoveRepeatPoints;
+    function ParsePoints(data) {
+        data = data.replace(/[^\d.,-\s]/g, "");
+        let splitterCoordinates = " ";
+        let splitterAxis = ",";
+        const commaIndex = data.indexOf(",");
+        const spaceIndex = data.indexOf(" ");
+        if ((spaceIndex > -1 && commaIndex > spaceIndex) || commaIndex <= -1) {
+            splitterCoordinates = ",";
+            splitterAxis = " ";
+        }
+        let points = data.trim().split(splitterCoordinates);
+        points = points.filter(a => a != "");
+        const result = [];
+        for (let i = 0; i < points.length; i++) {
+            const pointData = points[i];
+            const coords = pointData.trim().split(splitterAxis);
+            if (coords.length == 2 || coords.length == 3) {
+                const longitude = Number(coords[0]);
+                const latitude = Number(coords[1]);
+                const altitude = Number(coords.length >= 3 ? coords[2] : 0);
+                if (longitude != null && latitude != null) {
+                    result.push({
+                        altitude: altitude,
+                        latitude: latitude,
+                        longitude: longitude
+                    });
+                }
+                else {
+                    console.warn("Invalid point data detected.", pointData);
+                }
+            }
+        }
+        return result;
+    }
+    Geometry.ParsePoints = ParsePoints;
+    /**
+     * Parses both string and object Bruce geometry.
+     * String geometry is legacy Bruce data.
+     * @param geometry
+     * @returns
+     */
+    function ParseGeometry(geometry) {
+        if (typeof geometry == "string") {
+            let positions = [];
+            const geometryParsed = (geometry || "").split(";");
+            for (let i = 0; i < geometryParsed.length; i++) {
+                const data = geometryParsed[i];
+                const points = ParsePoints(data);
+                if (points && points.length > 0) {
+                    positions = positions.concat(points);
+                }
+            }
+            positions = RemoveRepeatPoints(positions);
+            const newGeometry = {};
+            if (positions.length > 0) {
+                const topPoint = positions[0];
+                newGeometry.Point = `${topPoint.latitude},${topPoint.longitude}` + (topPoint.altitude != null ? `,${topPoint.altitude}` : "");
+                if (positions.length > 1) {
+                    newGeometry.Polygon = [{ Facing: EPolygonRingType.Boundaries, LinearRing: LineStrFromPoints(positions) }];
+                }
+                if (positions.length > 2) {
+                    newGeometry.LineString = LineStrFromPoints(positions);
+                }
+            }
+            return newGeometry;
+        }
+        return geometry;
+    }
+    Geometry.ParseGeometry = ParseGeometry;
+})(Geometry || (Geometry = {}));
+
+var Bounds;
+(function (Bounds) {
+    /**
+     * Calculates boundaries from entity.
+     * This will not use the set entity boundaries and instead calculate from geometry and location.
+     * @param entity
+     */
+    function FromEntity(entity) {
+        const bounds = {
+            maxAltitude: null,
+            maxLatitude: null,
+            maxLongitude: null,
+            minAltitude: null,
+            minLatitude: null,
+            minLongitude: null
+        };
+        const points = [];
+        if (entity.location) {
+            points.push(entity.location);
+        }
+        if (entity.geometry) {
+            if (entity.geometry.Point) {
+                points.push(...Geometry.ParsePoints(entity.geometry.Point));
+            }
+            if (entity.geometry.LineString) {
+                points.push(...Geometry.ParsePoints(entity.geometry.LineString));
+            }
+            if (entity.geometry.Polygon) {
+                for (const ring of entity.geometry.Polygon) {
+                    points.push(...Geometry.ParsePoints(ring.LinearRing));
+                }
+            }
+        }
+        for (const point of points) {
+            if (bounds.maxLatitude == null || point.latitude > bounds.maxLatitude) {
+                bounds.maxLatitude = point.latitude;
+            }
+            if (bounds.maxLongitude == null || point.longitude > bounds.maxLongitude) {
+                bounds.maxLongitude = point.longitude;
+            }
+            if (bounds.maxAltitude == null || point.altitude > bounds.maxAltitude) {
+                bounds.maxAltitude = point.altitude;
+            }
+            if (bounds.minLatitude == null || point.latitude < bounds.minLatitude) {
+                bounds.minLatitude = point.latitude;
+            }
+            if (bounds.minLongitude == null || point.longitude < bounds.minLongitude) {
+                bounds.minLongitude = point.longitude;
+            }
+            if (bounds.minAltitude == null || point.altitude < bounds.minAltitude) {
+                bounds.minAltitude = point.altitude;
+            }
+        }
+        return bounds;
+    }
+    Bounds.FromEntity = FromEntity;
+})(Bounds || (Bounds = {}));
+
 /**
  * Simple event utility.
  * Instantiate the model, then subscribe and trigger events.
@@ -2250,124 +2426,6 @@ class DelayQueue {
     }
 }
 
-/**
- * Describes vector geometry that Bruce uses.
- */
-var Geometry;
-(function (Geometry) {
-    let EPolygonRingType;
-    (function (EPolygonRingType) {
-        EPolygonRingType["Boundaries"] = "out";
-        EPolygonRingType["Hole"] = "in";
-    })(EPolygonRingType = Geometry.EPolygonRingType || (Geometry.EPolygonRingType = {}));
-    /**
-     * Turns an array of points into string vector geometry that Bruce can use.
-     * This is used for saving polyline and polygon data.
-     * @param points
-     * @returns
-     */
-    function LineStrFromPoints(points) {
-        if (!points.length) {
-            throw ("points is empty.");
-        }
-        let carto = points[0];
-        let lineString = `${carto.longitude},${carto.latitude}` + (carto.altitude != null ? `,${carto.altitude}` : "");
-        for (let i = 1; i < points.length; i++) {
-            carto = points[i];
-            lineString += ` ${carto.longitude},${carto.latitude}` + (carto.altitude != null ? `,${carto.altitude}` : "");
-        }
-        return lineString;
-    }
-    Geometry.LineStrFromPoints = LineStrFromPoints;
-    /**
-     * Removes same points that occur in a row.
-     * This will not modify the original array.
-     * @param positions
-     * @returns
-     */
-    function RemoveRepeatPoints(positions) {
-        const filteredList = [];
-        for (let i = 0; i < positions.length; i++) {
-            const pos = positions[i];
-            const lastPos = filteredList.length > 0 ? filteredList[filteredList.length - 1] : null;
-            if (!lastPos || (pos.latitude != lastPos.latitude || pos.longitude != lastPos.longitude || pos.altitude != lastPos.altitude)) {
-                filteredList.push(pos);
-            }
-        }
-        return filteredList;
-    }
-    Geometry.RemoveRepeatPoints = RemoveRepeatPoints;
-    function ParsePoints(data) {
-        data = data.replace(/[^\d.,-\s]/g, "");
-        let splitterCoordinates = " ";
-        let splitterAxis = ",";
-        const commaIndex = data.indexOf(",");
-        const spaceIndex = data.indexOf(" ");
-        if ((spaceIndex > -1 && commaIndex > spaceIndex) || commaIndex <= -1) {
-            splitterCoordinates = ",";
-            splitterAxis = " ";
-        }
-        let points = data.trim().split(splitterCoordinates);
-        points = points.filter(a => a != "");
-        const result = [];
-        for (let i = 0; i < points.length; i++) {
-            const pointData = points[i];
-            const coords = pointData.trim().split(splitterAxis);
-            if (coords.length == 2 || coords.length == 3) {
-                const longitude = Number(coords[0]);
-                const latitude = Number(coords[1]);
-                const altitude = Number(coords.length >= 3 ? coords[2] : 0);
-                if (longitude != null && latitude != null) {
-                    result.push({
-                        altitude: altitude,
-                        latitude: latitude,
-                        longitude: longitude
-                    });
-                }
-                else {
-                    console.warn("Invalid point data detected.", pointData);
-                }
-            }
-        }
-        return result;
-    }
-    Geometry.ParsePoints = ParsePoints;
-    /**
-     * Parses both string and object Bruce geometry.
-     * String geometry is legacy Bruce data.
-     * @param geometry
-     * @returns
-     */
-    function ParseGeometry(geometry) {
-        if (typeof geometry == "string") {
-            let positions = [];
-            const geometryParsed = (geometry || "").split(";");
-            for (let i = 0; i < geometryParsed.length; i++) {
-                const data = geometryParsed[i];
-                const points = ParsePoints(data);
-                if (points && points.length > 0) {
-                    positions = positions.concat(points);
-                }
-            }
-            positions = RemoveRepeatPoints(positions);
-            const newGeometry = {};
-            if (positions.length > 0) {
-                const topPoint = positions[0];
-                newGeometry.Point = `${topPoint.latitude},${topPoint.longitude}` + (topPoint.altitude != null ? `,${topPoint.altitude}` : "");
-                if (positions.length > 1) {
-                    newGeometry.Polygon = [{ Facing: EPolygonRingType.Boundaries, LinearRing: LineStrFromPoints(positions) }];
-                }
-                if (positions.length > 2) {
-                    newGeometry.LineString = LineStrFromPoints(positions);
-                }
-            }
-            return newGeometry;
-        }
-        return geometry;
-    }
-    Geometry.ParseGeometry = ParseGeometry;
-})(Geometry || (Geometry = {}));
-
 /**
  * Describes a Bruce stored date.
  */
@@ -6111,5 +6169,5 @@ var Markup;
     })(Entity3d = Markup.Entity3d || (Markup.Entity3d = {}));
 })(Markup || (Markup = {}));
 
-export { AnnDocument, CustomForm, CustomFormContent, AbstractApi, Api, BruceApi, CamApi, IdmApi, GlobalApi, Calculator, BruceEvent, CacheControl, Camera, Cartes, Carto, Color, DelayQueue, Geometry, UTC, BruceVariable, EntityAttachmentType, EntityAttachment, EntityComment, EntityLink, EntityLod, EntityRelationType, EntityRelation, EntitySource, EntityTag, EntityType, Entity, EntityGlobe, EntityFilterGetter, BatchedDataGetter, EntityCoords, EntityTypeVisualSettings, ClientFile, ProgramKey, ZoomControl, MenuItem, ProjectViewBookmark, ProjectView, ProjectViewLegacyTile, ProjectViewTile, PendingAction, MessageBroker, Style, TilesetEntitiesMapTiles, TilesetExtMapTiles, Tileset, Permission, Session, UserGroup, User, Account, EncryptUtils, MathUtils, ObjectUtils, PathUtils, UrlUtils, DataLab, ImportCad, ImportCsv, ImportJson, ImportKml, ImportedFile, Markup };
+export { AnnDocument, CustomForm, CustomFormContent, AbstractApi, Api, BruceApi, CamApi, IdmApi, GlobalApi, Calculator, Bounds, BruceEvent, CacheControl, Camera, Cartes, Carto, Color, DelayQueue, Geometry, UTC, BruceVariable, EntityAttachmentType, EntityAttachment, EntityComment, EntityLink, EntityLod, EntityRelationType, EntityRelation, EntitySource, EntityTag, EntityType, Entity, EntityGlobe, EntityFilterGetter, BatchedDataGetter, EntityCoords, EntityTypeVisualSettings, ClientFile, ProgramKey, ZoomControl, MenuItem, ProjectViewBookmark, ProjectView, ProjectViewLegacyTile, ProjectViewTile, PendingAction, MessageBroker, Style, TilesetEntitiesMapTiles, TilesetExtMapTiles, Tileset, Permission, Session, UserGroup, User, Account, EncryptUtils, MathUtils, ObjectUtils, PathUtils, UrlUtils, DataLab, ImportCad, ImportCsv, ImportJson, ImportKml, ImportedFile, Markup };
 //# sourceMappingURL=bruce-models.es5.js.map