brepkit-wasm 2.87.0 → 2.88.0

package/brepkit_wasm.d.ts

@@ -1105,6 +1105,22 @@ export class BrepKernel {
      * Returns an edge handle (`u32`).
      */
     makeCircleArc3d(start_x: number, start_y: number, start_z: number, end_x: number, end_y: number, end_z: number, center_x: number, center_y: number, center_z: number, axis_x: number, axis_y: number, axis_z: number): number;
+    /**
+     * Create a closed circular edge with true `Circle` curve geometry.
+     *
+     * Unlike `makeCircle` (which returns a polygon face approximation),
+     * this creates a single closed edge with an [`EdgeCurve::Circle`]
+     * backing curve and parameter domain `[0, 2π]`. The start and end
+     * vertex are shared at the seam point `circle.evaluate(0.0)`.
+     *
+     * Returns an edge handle (`u32`).
+     *
+     * # Errors
+     *
+     * Returns an error if any coordinate is NaN/infinite, `radius` is
+     * non-positive, or the normal vector is zero.
+     */
+    makeCircleEdge(cx: number, cy: number, cz: number, nx: number, ny: number, nz: number, radius: number): number;
     /**
      * Create a circular face on the XY plane (using NURBS arcs).
      *
@@ -1137,6 +1153,22 @@ export class BrepKernel {
      * Returns an error if radius or height is non-positive.
      */
     makeCylinder(radius: number, height: number): number;
+    /**
+     * Create a closed elliptical edge with true `Ellipse` curve geometry.
+     *
+     * Creates a single closed edge with an [`EdgeCurve::Ellipse`] backing
+     * curve and parameter domain `[0, 2π]`. The start and end vertex are
+     * shared at the seam point `ellipse.evaluate(0.0)`.
+     *
+     * Returns an edge handle (`u32`).
+     *
+     * # Errors
+     *
+     * Returns an error if any coordinate is NaN/infinite, either
+     * semi-axis is non-positive, `semi_minor` exceeds `semi_major`, or
+     * the normal vector is zero.
+     */
+    makeEllipseEdge(cx: number, cy: number, cz: number, nx: number, ny: number, nz: number, semi_major: number, semi_minor: number): number;
     /**
      * Create an ellipsoid solid centered at the origin.
      *

package/brepkit_wasm_bg.js

@@ -2441,6 +2441,36 @@ export class BrepKernel {
         }
         return ret[0] >>> 0;
     }
+    /**
+     * Create a closed circular edge with true `Circle` curve geometry.
+     *
+     * Unlike `makeCircle` (which returns a polygon face approximation),
+     * this creates a single closed edge with an [`EdgeCurve::Circle`]
+     * backing curve and parameter domain `[0, 2π]`. The start and end
+     * vertex are shared at the seam point `circle.evaluate(0.0)`.
+     *
+     * Returns an edge handle (`u32`).
+     *
+     * # Errors
+     *
+     * Returns an error if any coordinate is NaN/infinite, `radius` is
+     * non-positive, or the normal vector is zero.
+     * @param {number} cx
+     * @param {number} cy
+     * @param {number} cz
+     * @param {number} nx
+     * @param {number} ny
+     * @param {number} nz
+     * @param {number} radius
+     * @returns {number}
+     */
+    makeCircleEdge(cx, cy, cz, nx, ny, nz, radius) {
+        const ret = wasm.brepkernel_makeCircleEdge(this.__wbg_ptr, cx, cy, cz, nx, ny, nz, radius);
+        if (ret[2]) {
+            throw takeFromExternrefTable0(ret[1]);
+        }
+        return ret[0] >>> 0;
+    }
     /**
      * Create a circular face on the XY plane (using NURBS arcs).
      *
@@ -2511,6 +2541,37 @@ export class BrepKernel {
         }
         return ret[0] >>> 0;
     }
+    /**
+     * Create a closed elliptical edge with true `Ellipse` curve geometry.
+     *
+     * Creates a single closed edge with an [`EdgeCurve::Ellipse`] backing
+     * curve and parameter domain `[0, 2π]`. The start and end vertex are
+     * shared at the seam point `ellipse.evaluate(0.0)`.
+     *
+     * Returns an edge handle (`u32`).
+     *
+     * # Errors
+     *
+     * Returns an error if any coordinate is NaN/infinite, either
+     * semi-axis is non-positive, `semi_minor` exceeds `semi_major`, or
+     * the normal vector is zero.
+     * @param {number} cx
+     * @param {number} cy
+     * @param {number} cz
+     * @param {number} nx
+     * @param {number} ny
+     * @param {number} nz
+     * @param {number} semi_major
+     * @param {number} semi_minor
+     * @returns {number}
+     */
+    makeEllipseEdge(cx, cy, cz, nx, ny, nz, semi_major, semi_minor) {
+        const ret = wasm.brepkernel_makeEllipseEdge(this.__wbg_ptr, cx, cy, cz, nx, ny, nz, semi_major, semi_minor);
+        if (ret[2]) {
+            throw takeFromExternrefTable0(ret[1]);
+        }
+        return ret[0] >>> 0;
+    }
     /**
      * Create an ellipsoid solid centered at the origin.
      *

package/brepkit_wasm_node.cjs

@@ -2443,6 +2443,36 @@ class BrepKernel {
         }
         return ret[0] >>> 0;
     }
+    /**
+     * Create a closed circular edge with true `Circle` curve geometry.
+     *
+     * Unlike `makeCircle` (which returns a polygon face approximation),
+     * this creates a single closed edge with an [`EdgeCurve::Circle`]
+     * backing curve and parameter domain `[0, 2π]`. The start and end
+     * vertex are shared at the seam point `circle.evaluate(0.0)`.
+     *
+     * Returns an edge handle (`u32`).
+     *
+     * # Errors
+     *
+     * Returns an error if any coordinate is NaN/infinite, `radius` is
+     * non-positive, or the normal vector is zero.
+     * @param {number} cx
+     * @param {number} cy
+     * @param {number} cz
+     * @param {number} nx
+     * @param {number} ny
+     * @param {number} nz
+     * @param {number} radius
+     * @returns {number}
+     */
+    makeCircleEdge(cx, cy, cz, nx, ny, nz, radius) {
+        const ret = wasm.brepkernel_makeCircleEdge(this.__wbg_ptr, cx, cy, cz, nx, ny, nz, radius);
+        if (ret[2]) {
+            throw takeFromExternrefTable0(ret[1]);
+        }
+        return ret[0] >>> 0;
+    }
     /**
      * Create a circular face on the XY plane (using NURBS arcs).
      *
@@ -2513,6 +2543,37 @@ class BrepKernel {
         }
         return ret[0] >>> 0;
     }
+    /**
+     * Create a closed elliptical edge with true `Ellipse` curve geometry.
+     *
+     * Creates a single closed edge with an [`EdgeCurve::Ellipse`] backing
+     * curve and parameter domain `[0, 2π]`. The start and end vertex are
+     * shared at the seam point `ellipse.evaluate(0.0)`.
+     *
+     * Returns an edge handle (`u32`).
+     *
+     * # Errors
+     *
+     * Returns an error if any coordinate is NaN/infinite, either
+     * semi-axis is non-positive, `semi_minor` exceeds `semi_major`, or
+     * the normal vector is zero.
+     * @param {number} cx
+     * @param {number} cy
+     * @param {number} cz
+     * @param {number} nx
+     * @param {number} ny
+     * @param {number} nz
+     * @param {number} semi_major
+     * @param {number} semi_minor
+     * @returns {number}
+     */
+    makeEllipseEdge(cx, cy, cz, nx, ny, nz, semi_major, semi_minor) {
+        const ret = wasm.brepkernel_makeEllipseEdge(this.__wbg_ptr, cx, cy, cz, nx, ny, nz, semi_major, semi_minor);
+        if (ret[2]) {
+            throw takeFromExternrefTable0(ret[1]);
+        }
+        return ret[0] >>> 0;
+    }
     /**
      * Create an ellipsoid solid centered at the origin.
      *

package/package.json

@@ -2,7 +2,7 @@
   "name": "brepkit-wasm",
   "type": "module",
   "description": "WebAssembly bindings for brepkit — browser-native B-Rep solid modeling",
-  "version": "2.87.0",
+  "version": "2.88.0",
   "license": "MIT OR Apache-2.0",
   "repository": {
     "type": "git",