brepjs 20.5.0 → 20.7.0

package/dist/{bug-O02CsAmt.cjs → bug-CBcpIPuf.cjs}

@@ -1,4 +1,4 @@
-//#region src/utils/vec3.ts
+// src/utils/vec3.ts
 /**
 * Index into a typed/regular array at a position the caller has structurally
 * guaranteed (WASM ABI fixed-length arrays, post-bounds-check loops, etc.).
@@ -21,8 +21,7 @@ function vec3At(arr, offset = 0) {
 		arr[offset + 2]
 	];
 }
-//#endregion
-//#region src/utils/bug.ts
+// src/utils/bug.ts
 /**
 * Bug / panic helper — these throw and should never be caught in normal code.
 * Lives in utils (Layer 0) so it can be used by all layers including kernel.
@@ -43,7 +42,6 @@ var BrepBugError = class extends Error {
 function bug(location, message) {
 	throw new BrepBugError(location, message);
 }
-//#endregion
 Object.defineProperty(exports, "BrepBugError", {
 	enumerable: true,
 	get: function() {

package/dist/{bug-BdOHwn_e.js → bug-ClMTAJhe.js}

@@ -1,4 +1,4 @@
-//#region src/utils/vec3.ts
+// src/utils/vec3.ts
 /**
 * Index into a typed/regular array at a position the caller has structurally
 * guaranteed (WASM ABI fixed-length arrays, post-bounds-check loops, etc.).
@@ -21,8 +21,7 @@ function vec3At(arr, offset = 0) {
 		arr[offset + 2]
 	];
 }
-//#endregion
-//#region src/utils/bug.ts
+// src/utils/bug.ts
 /**
 * Bug / panic helper — these throw and should never be caught in normal code.
 * Lives in utils (Layer 0) so it can be used by all layers including kernel.
@@ -43,5 +42,4 @@ var BrepBugError = class extends Error {
 function bug(location, message) {
 	throw new BrepBugError(location, message);
 }
-//#endregion
 export { wasmIndex as i, bug as n, vec3At as r, BrepBugError as t };

package/dist/{cameraFns-Cs6v3bWQ.js → cameraFns-9AGyuZVp.js}

@@ -1,9 +1,9 @@
-import { G as _usingCtx, n as castResultShape, q as getKernel } from "./shapeTypes-CqNJoSam.js";
-import { E as ok, P as unwrap, d as validationError, g as err } from "./errors-Zb3jBa0u.js";
-import { s as getEdges } from "./topologyQueryFns-DnfjQgP7.js";
-import { c as vecLength, d as vecNormalize, g as vecSub, r as vecCross } from "./vecOps-SKPRvPH-.js";
-import { t as clone } from "./shapeFns--1wNlcc_.js";
-//#region src/projection/projectionPlanes.ts
+import { G as _usingCtx, n as castResultShape, q as getKernel } from "./shapeTypes-CgbUTASh.js";
+import { E as ok, P as unwrap, d as validationError, g as err } from "./errors-vxP5FT8B.js";
+import { s as getEdges } from "./topologyQueryFns-6M_dbT1R.js";
+import { c as vecLength, d as vecNormalize, g as vecSub, r as vecCross } from "./vecOps-S-m9H_fe.js";
+import { t as clone } from "./shapeFns-DB3l3ULC.js";
+// src/projection/projectionPlanes.ts
 /** Lookup table mapping each {@link ProjectionPlane} to its camera configuration. */
 var PROJECTION_PLANES = {
 	XY: {
@@ -155,8 +155,7 @@ var PROJECTION_PLANES = {
 function isProjectionPlane(plane) {
 	return typeof plane === "string" && plane in PROJECTION_PLANES;
 }
-//#endregion
-//#region src/projection/makeProjectedEdges.ts
+// src/projection/makeProjectedEdges.ts
 var getEdgesFromOc = (shape) => {
 	try {
 		var _usingCtx$1 = _usingCtx();
@@ -199,8 +198,7 @@ function makeProjectedEdges(shape, camera, withHiddenLines = true) {
 		hidden
 	};
 }
-//#endregion
-//#region src/projection/cameraFns.ts
+// src/projection/cameraFns.ts
 /**
 * Create a camera from position, direction, and an optional X-axis.
 *
@@ -287,5 +285,4 @@ function cameraFromPlane(planeName) {
 function projectEdges(shape, camera, withHiddenLines = true) {
 	return makeProjectedEdges(shape, camera, withHiddenLines);
 }
-//#endregion
 export { makeProjectedEdges as a, projectEdges as i, cameraLookAt as n, PROJECTION_PLANES as o, createCamera as r, isProjectionPlane as s, cameraFromPlane as t };

package/dist/{cameraFns-RHCb1F1s.cjs → cameraFns-CKUN90f_.cjs}

@@ -1,9 +1,9 @@
-const require_shapeTypes = require("./shapeTypes-DH2ShBU_.cjs");
-const require_errors = require("./errors-jwhfQJZK.cjs");
-const require_topologyQueryFns = require("./topologyQueryFns-q2bGyuEV.cjs");
-const require_vecOps = require("./vecOps-CCnJt-yH.cjs");
-const require_shapeFns = require("./shapeFns-C2j6oZ2u.cjs");
-//#region src/projection/projectionPlanes.ts
+const require_shapeTypes = require("./shapeTypes-D_anqiRe.cjs");
+const require_errors = require("./errors-GVyCnpi0.cjs");
+const require_topologyQueryFns = require("./topologyQueryFns-ENxs8uu2.cjs");
+const require_vecOps = require("./vecOps-CrGEPPQM.cjs");
+const require_shapeFns = require("./shapeFns-B54CsPyk.cjs");
+// src/projection/projectionPlanes.ts
 /** Lookup table mapping each {@link ProjectionPlane} to its camera configuration. */
 var PROJECTION_PLANES = {
 	XY: {
@@ -155,8 +155,7 @@ var PROJECTION_PLANES = {
 function isProjectionPlane(plane) {
 	return typeof plane === "string" && plane in PROJECTION_PLANES;
 }
-//#endregion
-//#region src/projection/makeProjectedEdges.ts
+// src/projection/makeProjectedEdges.ts
 var getEdgesFromOc = (shape) => {
 	try {
 		var _usingCtx$1 = require_shapeTypes._usingCtx();
@@ -199,8 +198,7 @@ function makeProjectedEdges(shape, camera, withHiddenLines = true) {
 		hidden
 	};
 }
-//#endregion
-//#region src/projection/cameraFns.ts
+// src/projection/cameraFns.ts
 /**
 * Create a camera from position, direction, and an optional X-axis.
 *
@@ -287,7 +285,6 @@ function cameraFromPlane(planeName) {
 function projectEdges(shape, camera, withHiddenLines = true) {
 	return makeProjectedEdges(shape, camera, withHiddenLines);
 }
-//#endregion
 Object.defineProperty(exports, "PROJECTION_PLANES", {
 	enumerable: true,
 	get: function() {

package/dist/{constants-ITRzCnCp.js → constants-iraOnb2p.js}

@@ -1,9 +1,8 @@
-//#region src/core/constants.ts
+// src/core/constants.ts
 /** Maximum hash code value for kernel shape hashing (2^31 - 1). */
 var HASH_CODE_MAX = 2147483647;
 /** Multiply degrees by this constant to convert to radians. */
 var DEG2RAD = Math.PI / 180;
 /** Multiply radians by this constant to convert to degrees. */
 var RAD2DEG = 180 / Math.PI;
-//#endregion
 export { HASH_CODE_MAX as n, RAD2DEG as r, DEG2RAD as t };

package/dist/{constants-BOVyEYGH.cjs → constants-oee0S_x6.cjs}

@@ -1,11 +1,10 @@
-//#region src/core/constants.ts
+// src/core/constants.ts
 /** Maximum hash code value for kernel shape hashing (2^31 - 1). */
 var HASH_CODE_MAX = 2147483647;
 /** Multiply degrees by this constant to convert to radians. */
 var DEG2RAD = Math.PI / 180;
 /** Multiply radians by this constant to convert to degrees. */
 var RAD2DEG = 180 / Math.PI;
-//#endregion
 Object.defineProperty(exports, "DEG2RAD", {
 	enumerable: true,
 	get: function() {

package/dist/core/errors.d.ts

@@ -65,7 +65,10 @@ export declare const BrepErrorCode: {
     readonly CHAMFER_ANGLE_FAILED: "CHAMFER_ANGLE_FAILED";
     readonly CSG_NOT_3D: "CSG_NOT_3D";
     readonly SHELL_NOT_3D: "SHELL_NOT_3D";
+    readonly SHELL_NO_EFFECT: "SHELL_NO_EFFECT";
+    readonly SHELL_INVALID_RESULT: "SHELL_INVALID_RESULT";
     readonly OFFSET_NOT_3D: "OFFSET_NOT_3D";
+    readonly OFFSET_INVALID_RESULT: "OFFSET_INVALID_RESULT";
     readonly NULL_SHAPE: "NULL_SHAPE";
     readonly NO_WRAPPER: "NO_WRAPPER";
     readonly WELD_NOT_SHELL: "WELD_NOT_SHELL";

package/dist/core.cjs

@@ -1,12 +1,12 @@
 Object.defineProperty(exports, Symbol.toStringTag, { value: "Module" });
-const require_shapeTypes = require("./shapeTypes-DH2ShBU_.cjs");
-const require_bug = require("./bug-O02CsAmt.cjs");
-const require_errors = require("./errors-jwhfQJZK.cjs");
-const require_validityTypes = require("./validityTypes-r0A2YdNq.cjs");
-const require_constants = require("./constants-BOVyEYGH.cjs");
-const require_types = require("./types-KjA8tY4Y.cjs");
-const require_vecOps = require("./vecOps-CCnJt-yH.cjs");
-const require_planeOps = require("./planeOps-DJuclNxa.cjs");
+const require_shapeTypes = require("./shapeTypes-D_anqiRe.cjs");
+const require_bug = require("./bug-CBcpIPuf.cjs");
+const require_errors = require("./errors-GVyCnpi0.cjs");
+const require_validityTypes = require("./validityTypes-BPamqRZ8.cjs");
+const require_constants = require("./constants-oee0S_x6.cjs");
+const require_types = require("./types-CjF9Rofr.cjs");
+const require_vecOps = require("./vecOps-CrGEPPQM.cjs");
+const require_planeOps = require("./planeOps-C9d2Y56B.cjs");
 exports.BrepBugError = require_bug.BrepBugError;
 exports.DEG2RAD = require_constants.DEG2RAD;
 exports.DisposalScope = require_shapeTypes.DisposalScope;

package/dist/core.js

@@ -1,9 +1,9 @@
-import { C as isSolid, D as getShapeKind, E as GeometryCleanupError, F as createKernelHandle, H as withScope, L as isLive, M as is3D, N as DisposalScope, P as createHandle, S as isShell, T as isWire, U as withScopeResult, W as withScopeResultAsync, _ as isCompound, b as isShape1D, i as castShape, j as is2D, v as isEdge, w as isVertex, x as isShape3D, y as isFace } from "./shapeTypes-CqNJoSam.js";
-import { n as bug, t as BrepBugError } from "./bug-BdOHwn_e.js";
-import { E as ok, F as unwrapErr, I as unwrapOr, L as unwrapOrElse, M as tryCatch, N as tryCatchAsync, P as unwrap, S as map, T as match, _ as flatMap, a as moduleInitError, b as isErr, c as sketcherStateError, d as validationError, f as OK, g as err, h as collect, i as kernelError, l as typeCastError, m as andThen, n as computationError, o as queryError, r as ioError, u as unsupportedError, w as mapErr, x as isOk } from "./errors-Zb3jBa0u.js";
-import { c as manifoldShell, f as validSolid, i as isOrientedFace, l as orientedFace, n as isClosedWire, r as isManifoldShell, s as isValidSolid, t as closedWire } from "./validityTypes-t7JpS0Ki.js";
-import { n as HASH_CODE_MAX, r as RAD2DEG, t as DEG2RAD } from "./constants-ITRzCnCp.js";
-import { n as toVec2, r as toVec3, t as resolveDirection } from "./types-D24Y27N0.js";
-import { a as vecDot, c as vecLength, d as vecNormalize, f as vecProjectToPlane, g as vecSub, h as vecScale, i as vecDistance, l as vecLengthSq, m as vecRotate, n as vecAngle, o as vecEquals, p as vecRepr, r as vecCross, s as vecIsZero, t as vecAdd, u as vecNegate } from "./vecOps-SKPRvPH-.js";
-import { i as pivotPlane, n as createPlane, o as resolvePlane, s as translatePlane, t as createNamedPlane } from "./planeOps-Cxws4Tiu.js";
+import { C as isSolid, D as getShapeKind, E as GeometryCleanupError, F as createKernelHandle, H as withScope, L as isLive, M as is3D, N as DisposalScope, P as createHandle, S as isShell, T as isWire, U as withScopeResult, W as withScopeResultAsync, _ as isCompound, b as isShape1D, i as castShape, j as is2D, v as isEdge, w as isVertex, x as isShape3D, y as isFace } from "./shapeTypes-CgbUTASh.js";
+import { n as bug, t as BrepBugError } from "./bug-ClMTAJhe.js";
+import { E as ok, F as unwrapErr, I as unwrapOr, L as unwrapOrElse, M as tryCatch, N as tryCatchAsync, P as unwrap, S as map, T as match, _ as flatMap, a as moduleInitError, b as isErr, c as sketcherStateError, d as validationError, f as OK, g as err, h as collect, i as kernelError, l as typeCastError, m as andThen, n as computationError, o as queryError, r as ioError, u as unsupportedError, w as mapErr, x as isOk } from "./errors-vxP5FT8B.js";
+import { c as manifoldShell, f as validSolid, i as isOrientedFace, l as orientedFace, n as isClosedWire, r as isManifoldShell, s as isValidSolid, t as closedWire } from "./validityTypes-BTuI0vcR.js";
+import { n as HASH_CODE_MAX, r as RAD2DEG, t as DEG2RAD } from "./constants-iraOnb2p.js";
+import { n as toVec2, r as toVec3, t as resolveDirection } from "./types-CKXsIm9-.js";
+import { a as vecDot, c as vecLength, d as vecNormalize, f as vecProjectToPlane, g as vecSub, h as vecScale, i as vecDistance, l as vecLengthSq, m as vecRotate, n as vecAngle, o as vecEquals, p as vecRepr, r as vecCross, s as vecIsZero, t as vecAdd, u as vecNegate } from "./vecOps-S-m9H_fe.js";
+import { i as pivotPlane, n as createPlane, o as resolvePlane, s as translatePlane, t as createNamedPlane } from "./planeOps-Dp0YvuFE.js";
 export { BrepBugError, DEG2RAD, DisposalScope, GeometryCleanupError, HASH_CODE_MAX, OK, RAD2DEG, andThen, bug, castShape, closedWire, collect, computationError, createHandle, createKernelHandle, createNamedPlane, createPlane, err, flatMap, getShapeKind, ioError, is2D, is3D, isClosedWire, isCompound, isEdge, isErr, isFace, isLive, isManifoldShell, isOk, isOrientedFace, isShape1D, isShape3D, isShell, isSolid, isValidSolid, isVertex, isWire, kernelError, manifoldShell, map, mapErr, match, moduleInitError, ok, orientedFace, pivotPlane, queryError, resolveDirection, resolvePlane, sketcherStateError, toVec2, toVec3, translatePlane, tryCatch, tryCatchAsync, typeCastError, unsupportedError, unwrap, unwrapErr, unwrapOr, unwrapOrElse, validSolid, validationError, vecAdd, vecAngle, vecCross, vecDistance, vecDot, vecEquals, vecIsZero, vecLength, vecLengthSq, vecNegate, vecNormalize, vecProjectToPlane, vecRepr, vecRotate, vecScale, vecSub, withScope, withScopeResult, withScopeResultAsync };

package/dist/{cornerFinder-Dlae8IX5.js → cornerFinder-Cr_04etw.js}

@@ -1,7 +1,7 @@
-import { t as DEG2RAD } from "./constants-ITRzCnCp.js";
-import { n as getAtOrThrow } from "./arrayAccess-DrUGPADn.js";
-import { p as distance2d, u as angle2d, v as samePoint } from "./helpers-BN1mVMuZ.js";
-//#region src/query/cornerFinder.ts
+import { t as DEG2RAD } from "./constants-iraOnb2p.js";
+import { n as getAtOrThrow } from "./arrayAccess-BpgouNir.js";
+import { p as distance2d, u as angle2d, v as samePoint } from "./helpers-sDialr0f.js";
+// src/query/cornerFinder.ts
 var PI_2 = 2 * Math.PI;
 function positiveHalfAngle(angle) {
 	const limitedAngle = angle % PI_2;
@@ -56,5 +56,4 @@ function buildCornerFinder(filters) {
 function cornerFinder() {
 	return buildCornerFinder([]);
 }
-//#endregion
 export { cornerFinder as t };

package/dist/{cornerFinder-Cji_BK-R.cjs → cornerFinder-DJWo6h1Z.cjs}

@@ -1,7 +1,7 @@
-const require_constants = require("./constants-BOVyEYGH.cjs");
-const require_arrayAccess = require("./arrayAccess-e4H9cBfh.cjs");
-const require_helpers = require("./helpers-NRZVshPb.cjs");
-//#region src/query/cornerFinder.ts
+const require_constants = require("./constants-oee0S_x6.cjs");
+const require_arrayAccess = require("./arrayAccess-DpJYARwv.cjs");
+const require_helpers = require("./helpers-JuPoaP_b.cjs");
+// src/query/cornerFinder.ts
 var PI_2 = 2 * Math.PI;
 function positiveHalfAngle(angle) {
 	const limitedAngle = angle % PI_2;
@@ -56,7 +56,6 @@ function buildCornerFinder(filters) {
 function cornerFinder() {
 	return buildCornerFinder([]);
 }
-//#endregion
 Object.defineProperty(exports, "cornerFinder", {
 	enumerable: true,
 	get: function() {

package/dist/{curveFns-KS1BWGhF.js → curveFns-CkA2WJP2.js}

@@ -1,6 +1,6 @@
-import { T as isWire, h as disposeResultShape, n as castResultShape, q as getKernel, v as isEdge } from "./shapeTypes-CqNJoSam.js";
-import { E as ok, g as err, l as typeCastError } from "./errors-Zb3jBa0u.js";
-//#region src/topology/curveFns.ts
+import { T as isWire, h as disposeResultShape, n as castResultShape, q as getKernel, v as isEdge } from "./shapeTypes-CgbUTASh.js";
+import { E as ok, g as err, l as typeCastError } from "./errors-vxP5FT8B.js";
+// src/topology/curveFns.ts
 /**
 * Curve and 1D shape functions — functional replacements for _1DShape/Curve methods.
 * All functions accept branded Edge or Wire handles and return plain values.
@@ -187,5 +187,4 @@ function offsetWire2D(wire, offset, kind = "arc") {
 	}
 	return ok(wrapped);
 }
-//#endregion
 export { curveIsPeriodic as a, curvePointAt as c, flipOrientation as d, getCurveType as f, offsetWire2D as h, curveIsClosed as i, curveStartPoint as l, interpolateCurve as m, curveAxis as n, curveLength as o, getOrientation as p, curveEndPoint as r, curvePeriod as s, approximateCurve as t, curveTangentAt as u };

package/dist/{curveFns-6-ULFrEB.cjs → curveFns-U7srQ3ZA.cjs}

@@ -1,6 +1,6 @@
-const require_shapeTypes = require("./shapeTypes-DH2ShBU_.cjs");
-const require_errors = require("./errors-jwhfQJZK.cjs");
-//#region src/topology/curveFns.ts
+const require_shapeTypes = require("./shapeTypes-D_anqiRe.cjs");
+const require_errors = require("./errors-GVyCnpi0.cjs");
+// src/topology/curveFns.ts
 /**
 * Curve and 1D shape functions — functional replacements for _1DShape/Curve methods.
 * All functions accept branded Edge or Wire handles and return plain values.
@@ -187,7 +187,6 @@ function offsetWire2D(wire, offset, kind = "arc") {
 	}
 	return require_errors.ok(wrapped);
 }
-//#endregion
 Object.defineProperty(exports, "approximateCurve", {
 	enumerable: true,
 	get: function() {

package/dist/{drawFns-3yRVBDgI.js → drawFns-C6bmFijD.js}

@@ -1,23 +1,23 @@
-import { G as _usingCtx, N as DisposalScope, c as createEdge, l as createFace, p as createWire, q as getKernel } from "./shapeTypes-CqNJoSam.js";
-import { i as wasmIndex, n as bug } from "./bug-BdOHwn_e.js";
-import { P as unwrap, s as safeIndex } from "./errors-Zb3jBa0u.js";
-import { s as getEdges } from "./topologyQueryFns-DnfjQgP7.js";
-import { t as DEG2RAD } from "./constants-ITRzCnCp.js";
-import { r as toVec3 } from "./types-D24Y27N0.js";
-import { d as vecNormalize, g as vecSub, h as vecScale, m as vecRotate, r as vecCross } from "./vecOps-SKPRvPH-.js";
-import { a as planeToWorld, o as resolvePlane } from "./planeOps-Cxws4Tiu.js";
-import { d as pointOnSurface, l as normalAt, m as uvBounds, r as faceCenter, u as outerWire, v as copyShape, y as downcast } from "./faceFns-CTlJC5IY.js";
-import { h as offsetWire2D, i as curveIsClosed, l as curveStartPoint } from "./curveFns-KS1BWGhF.js";
-import { n as getAtOrThrow, r as lastOrThrow, t as firstOrThrow } from "./arrayAccess-DrUGPADn.js";
-import { c as makeBSplineApproximation, d as makeCircle, f as makeEllipse, m as makeHelix, r as makeFace, s as assembleWire } from "./surfaceBuilders-8nLk2PWk.js";
-import { a as Blueprints, c as make2dOffset, i as CompoundBlueprint, l as intersectCurves, n as BaseSketcher2d, o as chamferCurves, s as filletCurves, u as Flatbush } from "./blueprintSketcher-FywUpRiV.js";
-import { b as squareDistance2d, l as add2d, s as PRECISION_OFFSET, v as samePoint$1, x as subtract2d } from "./helpers-BN1mVMuZ.js";
-import { _ as approximateAsSvgCompatibleCurve, a as edgeToCurve, f as make2dInerpolatedBSplineCurve, i as curvesAsEdgesOnPlane, l as make2dCircle, p as make2dSegmentCurve, s as make2dArcFromCenter, t as Blueprint, u as make2dEllipse, v as Curve2D, x as BoundingBox2d, y as deserializeCurve2D } from "./blueprint-rwJjYPzo.js";
-import { t as cornerFinder } from "./cornerFinder-Dlae8IX5.js";
-import { c as roundedRectangleBlueprint, n as fuse2D, r as intersect2D, s as polysidesBlueprint, t as cut2D } from "./boolean2D-D8igCYc9.js";
-import { _ as wrapSketchDataArray, a as Sketch, g as wrapSketchData, i as Sketches, t as textBlueprints } from "./textBlueprints-C13NAA3C.js";
-import { i as projectEdges, t as cameraFromPlane } from "./cameraFns-Cs6v3bWQ.js";
-//#region src/2d/lib/stitching.ts
+import { G as _usingCtx, N as DisposalScope, c as createEdge, l as createFace, p as createWire, q as getKernel } from "./shapeTypes-CgbUTASh.js";
+import { i as wasmIndex, n as bug } from "./bug-ClMTAJhe.js";
+import { P as unwrap, s as safeIndex } from "./errors-vxP5FT8B.js";
+import { s as getEdges } from "./topologyQueryFns-6M_dbT1R.js";
+import { t as DEG2RAD } from "./constants-iraOnb2p.js";
+import { r as toVec3 } from "./types-CKXsIm9-.js";
+import { d as vecNormalize, g as vecSub, h as vecScale, m as vecRotate, r as vecCross } from "./vecOps-S-m9H_fe.js";
+import { a as planeToWorld, o as resolvePlane } from "./planeOps-Dp0YvuFE.js";
+import { d as pointOnSurface, l as normalAt, m as uvBounds, r as faceCenter, u as outerWire, v as copyShape, y as downcast } from "./faceFns-BBk6XKJO.js";
+import { h as offsetWire2D, i as curveIsClosed, l as curveStartPoint } from "./curveFns-CkA2WJP2.js";
+import { n as getAtOrThrow, r as lastOrThrow, t as firstOrThrow } from "./arrayAccess-BpgouNir.js";
+import { c as makeBSplineApproximation, d as makeCircle, f as makeEllipse, m as makeHelix, r as makeFace, s as assembleWire } from "./surfaceBuilders-wdGNiImD.js";
+import { a as Blueprints, c as make2dOffset, i as CompoundBlueprint, l as intersectCurves, n as BaseSketcher2d, o as chamferCurves, s as filletCurves, u as Flatbush } from "./blueprintSketcher-DNp87aQZ.js";
+import { b as squareDistance2d, l as add2d, s as PRECISION_OFFSET, v as samePoint$1, x as subtract2d } from "./helpers-sDialr0f.js";
+import { _ as approximateAsSvgCompatibleCurve, a as edgeToCurve, f as make2dInerpolatedBSplineCurve, i as curvesAsEdgesOnPlane, l as make2dCircle, p as make2dSegmentCurve, s as make2dArcFromCenter, t as Blueprint, u as make2dEllipse, v as Curve2D, x as BoundingBox2d, y as deserializeCurve2D } from "./blueprint-Bth4EVaO.js";
+import { t as cornerFinder } from "./cornerFinder-Cr_04etw.js";
+import { c as roundedRectangleBlueprint, n as fuse2D, r as intersect2D, s as polysidesBlueprint, t as cut2D } from "./boolean2D-BAb4SnIL.js";
+import { _ as wrapSketchDataArray, a as Sketch, g as wrapSketchData, i as Sketches, t as textBlueprints } from "./textBlueprints-B_jwMuej.js";
+import { i as projectEdges, t as cameraFromPlane } from "./cameraFns-9AGyuZVp.js";
+// src/2d/lib/stitching.ts
 /**
 * Group a flat list of curves into connected chains by matching endpoints.
 *
@@ -68,8 +68,7 @@ var stitchCurves = (curves, precision = 1e-7) => {
 	});
 	return stitchedCurves;
 };
-//#endregion
-//#region src/sketching/sketcher.ts
+// src/sketching/sketcher.ts
 /**
 * Build 2D wire profiles on a 3D plane using a builder-pen API.
 *
@@ -173,8 +172,7 @@ var Sketcher = class extends BaseSketcher2d {
 		return this.done();
 	}
 };
-//#endregion
-//#region src/sketching/faceSketcher.ts
+// src/sketching/faceSketcher.ts
 /**
 * The FaceSketcher allows you to sketch on a face that is not planar, for
 * instance the sides of a cylinder.
@@ -291,8 +289,7 @@ var FaceSketcher = class extends BaseSketcher2d {
 		return this.done();
 	}
 };
-//#endregion
-//#region src/sketching/cannedSketches.ts
+// src/sketching/cannedSketches.ts
 /**
 * Create a circular Sketch on a given plane.
 *
@@ -520,8 +517,7 @@ var sketchHelix = (pitch, height, radius, center = [
 	const dirVec3 = toVec3(dir);
 	return new Sketch(unwrap(assembleWire([makeHelix(pitch, height, radius, centerVec3, dirVec3, lefthand)])));
 };
-//#endregion
-//#region src/sketching/shortcuts.ts
+// src/sketching/shortcuts.ts
 /**
 * Create a box centered on the XY plane and extruded along Z.
 *
@@ -538,8 +534,7 @@ var sketchHelix = (pitch, height, radius, center = [
 var makeBaseBox = (xLength, yLength, zLength) => {
 	return new Sketcher().movePointerTo([-xLength / 2, yLength / 2]).hLine(xLength).vLine(-yLength).hLine(-xLength).close().extrude(zLength);
 };
-//#endregion
-//#region src/2d/blueprints/blueprintOffset.ts
+// src/2d/blueprints/blueprintOffset.ts
 var samePoint = (x, y) => samePoint$1(x, y, PRECISION_OFFSET * 100);
 var getIntersectionPoint = (line1Start, line1End, line2Start, line2End) => {
 	const dx1 = line1Start[0] - line1End[0];
@@ -805,8 +800,7 @@ function offset(bp, offsetDistance, offsetConfig = {}) {
 	}
 	return null;
 }
-//#endregion
-//#region src/2d/blueprints/blueprintApproximations.ts
+// src/2d/blueprints/blueprintApproximations.ts
 /**
 * Replace curves that have no native SVG equivalent with polyline/arc approximations.
 *
@@ -824,8 +818,7 @@ function approximateForSVG(bp, options) {
 	else if (bp instanceof Blueprints) return new Blueprints(bp.blueprints.map((b) => approximateForSVG(b, options)));
 	return bp;
 }
-//#endregion
-//#region src/2d/blueprints/blueprintCustomCorners.ts
+// src/2d/blueprints/blueprintCustomCorners.ts
 function modifyCorners(makeCorner, blueprint, radius, finder) {
 	let modifyCorner = () => true;
 	if (finder) modifyCorner = finder.shouldKeep.bind(finder);
@@ -892,8 +885,7 @@ function fillet2D(shape, radius, finder) {
 function chamfer2D(shape, radius, finder) {
 	return modifyCorner2D(chamferCurves, shape, radius, finder);
 }
-//#endregion
-//#region src/sketching/drawing.ts
+// src/sketching/drawing.ts
 function wrapBlueprintResult(shape, result) {
 	if (shape instanceof Blueprint) return wrapSketchData(result);
 	else if (shape instanceof CompoundBlueprint) return wrapSketchDataArray(result);
@@ -1113,8 +1105,7 @@ function deserializeDrawing(data) {
 	}
 	return new Drawing(deserializeHelper(JSON.parse(data)));
 }
-//#endregion
-//#region src/sketching/drawingPen.ts
+// src/sketching/drawingPen.ts
 /**
 * DrawingPen is a helper class to draw in 2D. It is used to create drawings
 * by exposing a builder interface. It is not a drawing itself, but it can be
@@ -1166,8 +1157,7 @@ function draw(initialPoint) {
 	if (initialPoint) pen.movePointerTo(initialPoint);
 	return pen;
 }
-//#endregion
-//#region src/sketching/drawingFactories.ts
+// src/sketching/drawingFactories.ts
 /**
 * Creates the `Drawing` of a rectangle with (optional) rounded corners.
 *
@@ -1276,8 +1266,7 @@ var drawParametricFunction = (func, { pointsCount = 400, start = 0, stop = 1, cl
 		return func(start + t * stepSize);
 	}), approximationConfig, { closeShape });
 };
-//#endregion
-//#region src/sketching/draw3d.ts
+// src/sketching/draw3d.ts
 var edgesToDrawing = (edges) => {
 	try {
 		var _usingCtx$1 = _usingCtx();
@@ -1338,8 +1327,7 @@ function drawFaceOutline(face) {
 		_usingCtx3.d();
 	}
 }
-//#endregion
-//#region src/sketching/drawFns.ts
+// src/sketching/drawFns.ts
 /**
 * Sketch a drawing onto a 3D plane, producing a Sketch or Sketches.
 *
@@ -1460,5 +1448,4 @@ function scaleDrawing(drawing, factor, center) {
 function mirrorDrawing(drawing, centerOrDirection, origin, mode) {
 	return drawing.mirror(centerOrDirection, origin, mode);
 }
-//#endregion
 export { sketchEllipse as A, DrawingPen as C, makeBaseBox as D, deserializeDrawing as E, sketchRectangle as F, sketchRoundedRectangle as I, FaceSketcher as L, sketchHelix as M, sketchParametricFunction as N, polysideInnerRadius as O, sketchPolysides as P, Sketcher as R, drawText as S, Drawing as T, drawPolysides as _, drawingIntersect as a, drawSingleCircle as b, rotateDrawing as c, drawFaceOutline as d, drawProjection as f, drawPointsInterpolation as g, drawParametricFunction as h, drawingFuse as i, sketchFaceOffset as j, sketchCircle as k, scaleDrawing as l, drawEllipse as m, drawingCut as n, drawingToSketchOnPlane as o, drawCircle as p, drawingFillet as r, mirrorDrawing as s, drawingChamfer as t, translateDrawing as u, drawRectangle as v, draw as w, drawSingleEllipse as x, drawRoundedRectangle as y };

package/dist/{drawFns-Ddlgp9gQ.cjs → drawFns-DlCxozRP.cjs}

@@ -1,23 +1,23 @@
-const require_shapeTypes = require("./shapeTypes-DH2ShBU_.cjs");
-const require_bug = require("./bug-O02CsAmt.cjs");
-const require_errors = require("./errors-jwhfQJZK.cjs");
-const require_topologyQueryFns = require("./topologyQueryFns-q2bGyuEV.cjs");
-const require_constants = require("./constants-BOVyEYGH.cjs");
-const require_types = require("./types-KjA8tY4Y.cjs");
-const require_vecOps = require("./vecOps-CCnJt-yH.cjs");
-const require_planeOps = require("./planeOps-DJuclNxa.cjs");
-const require_faceFns = require("./faceFns-CZeHWke7.cjs");
-const require_curveFns = require("./curveFns-6-ULFrEB.cjs");
-const require_arrayAccess = require("./arrayAccess-e4H9cBfh.cjs");
-const require_surfaceBuilders = require("./surfaceBuilders-vYgSvgI6.cjs");
-const require_blueprintSketcher = require("./blueprintSketcher-CzKbxeTk.cjs");
-const require_helpers = require("./helpers-NRZVshPb.cjs");
-const require_blueprint = require("./blueprint-Yyoiz-U1.cjs");
-const require_cornerFinder = require("./cornerFinder-Cji_BK-R.cjs");
-const require_boolean2D = require("./boolean2D-BzZ9iBSn.cjs");
-const require_textBlueprints = require("./textBlueprints-fa7VHJZz.cjs");
-const require_cameraFns = require("./cameraFns-RHCb1F1s.cjs");
-//#region src/2d/lib/stitching.ts
+const require_shapeTypes = require("./shapeTypes-D_anqiRe.cjs");
+const require_bug = require("./bug-CBcpIPuf.cjs");
+const require_errors = require("./errors-GVyCnpi0.cjs");
+const require_topologyQueryFns = require("./topologyQueryFns-ENxs8uu2.cjs");
+const require_constants = require("./constants-oee0S_x6.cjs");
+const require_types = require("./types-CjF9Rofr.cjs");
+const require_vecOps = require("./vecOps-CrGEPPQM.cjs");
+const require_planeOps = require("./planeOps-C9d2Y56B.cjs");
+const require_faceFns = require("./faceFns-DSRREV5G.cjs");
+const require_curveFns = require("./curveFns-U7srQ3ZA.cjs");
+const require_arrayAccess = require("./arrayAccess-DpJYARwv.cjs");
+const require_surfaceBuilders = require("./surfaceBuilders-DOn2jWkh.cjs");
+const require_blueprintSketcher = require("./blueprintSketcher-CSDqr27-.cjs");
+const require_helpers = require("./helpers-JuPoaP_b.cjs");
+const require_blueprint = require("./blueprint-wq2TU1XP.cjs");
+const require_cornerFinder = require("./cornerFinder-DJWo6h1Z.cjs");
+const require_boolean2D = require("./boolean2D-BkgOjMRt.cjs");
+const require_textBlueprints = require("./textBlueprints-BQ60Rc96.cjs");
+const require_cameraFns = require("./cameraFns-CKUN90f_.cjs");
+// src/2d/lib/stitching.ts
 /**
 * Group a flat list of curves into connected chains by matching endpoints.
 *
@@ -68,8 +68,7 @@ var stitchCurves = (curves, precision = 1e-7) => {
 	});
 	return stitchedCurves;
 };
-//#endregion
-//#region src/sketching/sketcher.ts
+// src/sketching/sketcher.ts
 /**
 * Build 2D wire profiles on a 3D plane using a builder-pen API.
 *
@@ -173,8 +172,7 @@ var Sketcher = class extends require_blueprintSketcher.BaseSketcher2d {
 		return this.done();
 	}
 };
-//#endregion
-//#region src/sketching/faceSketcher.ts
+// src/sketching/faceSketcher.ts
 /**
 * The FaceSketcher allows you to sketch on a face that is not planar, for
 * instance the sides of a cylinder.
@@ -291,8 +289,7 @@ var FaceSketcher = class extends require_blueprintSketcher.BaseSketcher2d {
 		return this.done();
 	}
 };
-//#endregion
-//#region src/sketching/cannedSketches.ts
+// src/sketching/cannedSketches.ts
 /**
 * Create a circular Sketch on a given plane.
 *
@@ -520,8 +517,7 @@ var sketchHelix = (pitch, height, radius, center = [
 	const dirVec3 = require_types.toVec3(dir);
 	return new require_textBlueprints.Sketch(require_errors.unwrap(require_surfaceBuilders.assembleWire([require_surfaceBuilders.makeHelix(pitch, height, radius, centerVec3, dirVec3, lefthand)])));
 };
-//#endregion
-//#region src/sketching/shortcuts.ts
+// src/sketching/shortcuts.ts
 /**
 * Create a box centered on the XY plane and extruded along Z.
 *
@@ -538,8 +534,7 @@ var sketchHelix = (pitch, height, radius, center = [
 var makeBaseBox = (xLength, yLength, zLength) => {
 	return new Sketcher().movePointerTo([-xLength / 2, yLength / 2]).hLine(xLength).vLine(-yLength).hLine(-xLength).close().extrude(zLength);
 };
-//#endregion
-//#region src/2d/blueprints/blueprintOffset.ts
+// src/2d/blueprints/blueprintOffset.ts
 var samePoint = (x, y) => require_helpers.samePoint(x, y, require_helpers.PRECISION_OFFSET * 100);
 var getIntersectionPoint = (line1Start, line1End, line2Start, line2End) => {
 	const dx1 = line1Start[0] - line1End[0];
@@ -805,8 +800,7 @@ function offset(bp, offsetDistance, offsetConfig = {}) {
 	}
 	return null;
 }
-//#endregion
-//#region src/2d/blueprints/blueprintApproximations.ts
+// src/2d/blueprints/blueprintApproximations.ts
 /**
 * Replace curves that have no native SVG equivalent with polyline/arc approximations.
 *
@@ -824,8 +818,7 @@ function approximateForSVG(bp, options) {
 	else if (bp instanceof require_blueprintSketcher.Blueprints) return new require_blueprintSketcher.Blueprints(bp.blueprints.map((b) => approximateForSVG(b, options)));
 	return bp;
 }
-//#endregion
-//#region src/2d/blueprints/blueprintCustomCorners.ts
+// src/2d/blueprints/blueprintCustomCorners.ts
 function modifyCorners(makeCorner, blueprint, radius, finder) {
 	let modifyCorner = () => true;
 	if (finder) modifyCorner = finder.shouldKeep.bind(finder);
@@ -892,8 +885,7 @@ function fillet2D(shape, radius, finder) {
 function chamfer2D(shape, radius, finder) {
 	return modifyCorner2D(require_blueprintSketcher.chamferCurves, shape, radius, finder);
 }
-//#endregion
-//#region src/sketching/drawing.ts
+// src/sketching/drawing.ts
 function wrapBlueprintResult(shape, result) {
 	if (shape instanceof require_blueprint.Blueprint) return require_textBlueprints.wrapSketchData(result);
 	else if (shape instanceof require_blueprintSketcher.CompoundBlueprint) return require_textBlueprints.wrapSketchDataArray(result);
@@ -1113,8 +1105,7 @@ function deserializeDrawing(data) {
 	}
 	return new Drawing(deserializeHelper(JSON.parse(data)));
 }
-//#endregion
-//#region src/sketching/drawingPen.ts
+// src/sketching/drawingPen.ts
 /**
 * DrawingPen is a helper class to draw in 2D. It is used to create drawings
 * by exposing a builder interface. It is not a drawing itself, but it can be
@@ -1166,8 +1157,7 @@ function draw(initialPoint) {
 	if (initialPoint) pen.movePointerTo(initialPoint);
 	return pen;
 }
-//#endregion
-//#region src/sketching/drawingFactories.ts
+// src/sketching/drawingFactories.ts
 /**
 * Creates the `Drawing` of a rectangle with (optional) rounded corners.
 *
@@ -1276,8 +1266,7 @@ var drawParametricFunction = (func, { pointsCount = 400, start = 0, stop = 1, cl
 		return func(start + t * stepSize);
 	}), approximationConfig, { closeShape });
 };
-//#endregion
-//#region src/sketching/draw3d.ts
+// src/sketching/draw3d.ts
 var edgesToDrawing = (edges) => {
 	try {
 		var _usingCtx$1 = require_shapeTypes._usingCtx();
@@ -1338,8 +1327,7 @@ function drawFaceOutline(face) {
 		_usingCtx3.d();
 	}
 }
-//#endregion
-//#region src/sketching/drawFns.ts
+// src/sketching/drawFns.ts
 /**
 * Sketch a drawing onto a 3D plane, producing a Sketch or Sketches.
 *
@@ -1460,7 +1448,6 @@ function scaleDrawing(drawing, factor, center) {
 function mirrorDrawing(drawing, centerOrDirection, origin, mode) {
 	return drawing.mirror(centerOrDirection, origin, mode);
 }
-//#endregion
 Object.defineProperty(exports, "Drawing", {
 	enumerable: true,
 	get: function() {