brepjs 20.12.6 → 20.12.7

package/dist/{occtWasmAdapter-DVxLkjlJ.cjs → occtWasmAdapter-D3qerQTq.cjs}

@@ -1541,10 +1541,7 @@ function intersectCurves2dFn(c1, c2, tolerance) {
 		points: intersectLineCircle(c2, b2, c1, b1, tolerance),
 		segments: []
 	};
-	if (b1.__bk2d === "circle" && b2.__bk2d === "circle") return {
-		points: intersectCircleCircle(c1, b1, c2, b2, tolerance),
-		segments: []
-	};
+	if (b1.__bk2d === "circle" && b2.__bk2d === "circle") return intersectCircleCircle(c1, b1, c2, b2, tolerance);
 	return numericalIntersect(c1, c2, tolerance, c1 === c2);
 }
 /** Unwrap trimmed wrappers to get the basis curve type. */
@@ -1553,9 +1550,32 @@ function unwrapCurve(c) {
 	while (cur.__bk2d === "trimmed") cur = cur.basis;
 	return cur;
 }
-/** Check if parameter t is within the curve's domain. */
+/**
+* The interval a curve covers on its innermost basis's parameter. A trimmed wrapper's own
+* parameter runs 0..1, but the analytic solvers work on the unwrapped basis, so their
+* parameters must be bounded by this interval rather than by `curveBounds(c)`.
+*/
+function basisInterval(c) {
+	if (c.__bk2d !== "trimmed") return curveBounds(c);
+	const a = basisParam(c.basis, c.tStart);
+	const b = basisParam(c.basis, c.tEnd);
+	return {
+		first: Math.min(a, b),
+		last: Math.max(a, b)
+	};
+}
+function basisParam(c, t) {
+	let cur = c;
+	let s = t;
+	while (cur.__bk2d === "trimmed") {
+		s = cur.tStart + s * (cur.tEnd - cur.tStart);
+		cur = cur.basis;
+	}
+	return s;
+}
+/** Check if basis parameter t lies within the part of the basis that c covers. */
 function inDomain(c, t, tol) {
-	const b = curveBounds(c);
+	const b = basisInterval(c);
 	return t >= b.first - tol && t <= b.last + tol;
 }
 /** Find the parameter on curve c closest to point (px, py), searching near tGuess. */
@@ -1631,7 +1651,7 @@ function intersectLineLine(c1, l1, c2, l2, tol) {
 		points: [],
 		segments: []
 	};
-	const b1 = curveBounds(c1);
+	const b1 = basisInterval(c1);
 	const b2 = curveBounds(c2);
 	const p2s = evaluateCurve2d$1(c2, b2.first);
 	const p2e = evaluateCurve2d$1(c2, b2.last);
@@ -1672,42 +1692,83 @@ function intersectLineCircle(cLine, line, cCirc, circ, tol) {
 	}
 	return results;
 }
-function intersectConcentricArcs(c1, c2, tol) {
-	const b1 = curveBounds(c1);
-	const b2 = curveBounds(c2);
-	const isFullCircle1 = Math.abs(b1.last - b1.first - 2 * Math.PI) < 1e-10;
-	const isFullCircle2 = Math.abs(b2.last - b2.first - 2 * Math.PI) < 1e-10;
-	if (isFullCircle1 && isFullCircle2) return [];
-	if (isFullCircle1) return [evaluateCurve2d$1(c2, b2.first), evaluateCurve2d$1(c2, b2.last)];
-	if (isFullCircle2) return [evaluateCurve2d$1(c1, b1.first), evaluateCurve2d$1(c1, b1.last)];
-	const pts = [];
-	const checks = [
-		[c2, evaluateCurve2d$1(c1, b1.first)],
-		[c2, evaluateCurve2d$1(c1, b1.last)],
-		[c1, evaluateCurve2d$1(c2, b2.first)],
-		[c1, evaluateCurve2d$1(c2, b2.last)]
-	];
-	for (const [target, pt] of checks) {
-		const t = refineParam(target, pt[0], pt[1]);
-		if (t !== null) {
-			const [ex, ey] = evaluateCurve2d$1(target, t);
-			if ((ex - pt[0]) ** 2 + (ey - pt[1]) ** 2 < tol * tol * 100) pts.push(pt);
-		}
+/**
+* The counter-clockwise angular range [start, start + sweep] a circular curve covers,
+* and whether the curve itself runs counter-clockwise through it.
+*/
+function arcSpan(c, circ) {
+	const range = basisInterval(c);
+	const own = curveBounds(c);
+	const forward = basisParam(c, own.last) >= basisParam(c, own.first);
+	return {
+		start: circ.sense ? range.first : -range.last,
+		sweep: Math.min(range.last - range.first, 2 * Math.PI),
+		ccw: circ.sense === forward
+	};
+}
+/** The arc of `circ` from angle `from` counter-clockwise to `to`, traversed as `ccw` says. */
+function arcBetween(circ, from, to, ccw) {
+	const basis = makeCircle2d$1(circ.cx, circ.cy, circ.radius, ccw);
+	return ccw ? {
+		__bk2d: "trimmed",
+		basis,
+		tStart: from,
+		tEnd: to
+	} : {
+		__bk2d: "trimmed",
+		basis,
+		tStart: -to,
+		tEnd: -from
+	};
+}
+/**
+* Overlap of two arcs on the same circle: the shared stretches as segments oriented
+* along c1, and the places where the arcs only touch end to end as points.
+*/
+function intersectCoincidentArcs(c1, circ1, c2, circ2, tol) {
+	const turn = 2 * Math.PI;
+	const a = arcSpan(c1, circ1);
+	const b = arcSpan(c2, circ2);
+	const angleTol = tol / circ1.radius;
+	const isFull = (sweep) => turn - sweep <= angleTol;
+	const d = ((b.start - a.start) % turn + turn) % turn;
+	let windows;
+	if (isFull(b.sweep)) windows = [[0, a.sweep]];
+	else if (isFull(a.sweep)) windows = [[d, d + b.sweep]];
+	else windows = [[Math.max(0, d), Math.min(a.sweep, d + b.sweep)], [Math.max(0, d - turn), Math.min(a.sweep, d - turn + b.sweep)]];
+	const points = [];
+	const segments = [];
+	for (const [u, v] of windows) if (v - u > angleTol) segments.push(arcBetween(circ1, a.start + u, a.start + v, a.ccw));
+	else if (v - u > -angleTol) {
+		const angle = a.start + (u + v) / 2;
+		points.push([circ1.cx + circ1.radius * Math.cos(angle), circ1.cy + circ1.radius * Math.sin(angle)]);
 	}
-	const deduped = [];
-	for (const p of pts) if (!deduped.some(([ddx, ddy]) => (ddx - p[0]) ** 2 + (ddy - p[1]) ** 2 < tol * tol * 100)) deduped.push(p);
-	return deduped;
+	return {
+		points,
+		segments
+	};
 }
 function intersectCircleCircle(c1, circ1, c2, circ2, tol) {
 	const dx = circ2.cx - circ1.cx;
 	const dy = circ2.cy - circ1.cy;
 	const d = Math.sqrt(dx * dx + dy * dy);
+	if (d <= tol) {
+		if (Math.abs(circ1.radius - circ2.radius) > tol) return {
+			points: [],
+			segments: []
+		};
+		return intersectCoincidentArcs(c1, circ1, c2, circ2, tol);
+	}
+	return {
+		points: intersectCrossingCircles(c1, circ1, c2, circ2, tol, d),
+		segments: []
+	};
+}
+function intersectCrossingCircles(c1, circ1, c2, circ2, tol, d) {
+	const dx = circ2.cx - circ1.cx;
+	const dy = circ2.cy - circ1.cy;
 	if (d > circ1.radius + circ2.radius + tol) return [];
 	if (d < Math.abs(circ1.radius - circ2.radius) - tol) return [];
-	if (d < 1e-14) {
-		if (Math.abs(circ1.radius - circ2.radius) > tol) return [];
-		return intersectConcentricArcs(c1, c2, tol);
-	}
 	const a = (circ1.radius * circ1.radius - circ2.radius * circ2.radius + d * d) / (2 * d);
 	const h2 = circ1.radius * circ1.radius - a * a;
 	const h = Math.sqrt(Math.max(0, h2));

package/dist/{occtWasmAdapter-B9d0Q0Vl.js → occtWasmAdapter-DA7oMgcQ.js}

@@ -1541,10 +1541,7 @@ function intersectCurves2dFn(c1, c2, tolerance) {
 		points: intersectLineCircle(c2, b2, c1, b1, tolerance),
 		segments: []
 	};
-	if (b1.__bk2d === "circle" && b2.__bk2d === "circle") return {
-		points: intersectCircleCircle(c1, b1, c2, b2, tolerance),
-		segments: []
-	};
+	if (b1.__bk2d === "circle" && b2.__bk2d === "circle") return intersectCircleCircle(c1, b1, c2, b2, tolerance);
 	return numericalIntersect(c1, c2, tolerance, c1 === c2);
 }
 /** Unwrap trimmed wrappers to get the basis curve type. */
@@ -1553,9 +1550,32 @@ function unwrapCurve(c) {
 	while (cur.__bk2d === "trimmed") cur = cur.basis;
 	return cur;
 }
-/** Check if parameter t is within the curve's domain. */
+/**
+* The interval a curve covers on its innermost basis's parameter. A trimmed wrapper's own
+* parameter runs 0..1, but the analytic solvers work on the unwrapped basis, so their
+* parameters must be bounded by this interval rather than by `curveBounds(c)`.
+*/
+function basisInterval(c) {
+	if (c.__bk2d !== "trimmed") return curveBounds(c);
+	const a = basisParam(c.basis, c.tStart);
+	const b = basisParam(c.basis, c.tEnd);
+	return {
+		first: Math.min(a, b),
+		last: Math.max(a, b)
+	};
+}
+function basisParam(c, t) {
+	let cur = c;
+	let s = t;
+	while (cur.__bk2d === "trimmed") {
+		s = cur.tStart + s * (cur.tEnd - cur.tStart);
+		cur = cur.basis;
+	}
+	return s;
+}
+/** Check if basis parameter t lies within the part of the basis that c covers. */
 function inDomain(c, t, tol) {
-	const b = curveBounds(c);
+	const b = basisInterval(c);
 	return t >= b.first - tol && t <= b.last + tol;
 }
 /** Find the parameter on curve c closest to point (px, py), searching near tGuess. */
@@ -1631,7 +1651,7 @@ function intersectLineLine(c1, l1, c2, l2, tol) {
 		points: [],
 		segments: []
 	};
-	const b1 = curveBounds(c1);
+	const b1 = basisInterval(c1);
 	const b2 = curveBounds(c2);
 	const p2s = evaluateCurve2d$1(c2, b2.first);
 	const p2e = evaluateCurve2d$1(c2, b2.last);
@@ -1672,42 +1692,83 @@ function intersectLineCircle(cLine, line, cCirc, circ, tol) {
 	}
 	return results;
 }
-function intersectConcentricArcs(c1, c2, tol) {
-	const b1 = curveBounds(c1);
-	const b2 = curveBounds(c2);
-	const isFullCircle1 = Math.abs(b1.last - b1.first - 2 * Math.PI) < 1e-10;
-	const isFullCircle2 = Math.abs(b2.last - b2.first - 2 * Math.PI) < 1e-10;
-	if (isFullCircle1 && isFullCircle2) return [];
-	if (isFullCircle1) return [evaluateCurve2d$1(c2, b2.first), evaluateCurve2d$1(c2, b2.last)];
-	if (isFullCircle2) return [evaluateCurve2d$1(c1, b1.first), evaluateCurve2d$1(c1, b1.last)];
-	const pts = [];
-	const checks = [
-		[c2, evaluateCurve2d$1(c1, b1.first)],
-		[c2, evaluateCurve2d$1(c1, b1.last)],
-		[c1, evaluateCurve2d$1(c2, b2.first)],
-		[c1, evaluateCurve2d$1(c2, b2.last)]
-	];
-	for (const [target, pt] of checks) {
-		const t = refineParam(target, pt[0], pt[1]);
-		if (t !== null) {
-			const [ex, ey] = evaluateCurve2d$1(target, t);
-			if ((ex - pt[0]) ** 2 + (ey - pt[1]) ** 2 < tol * tol * 100) pts.push(pt);
-		}
+/**
+* The counter-clockwise angular range [start, start + sweep] a circular curve covers,
+* and whether the curve itself runs counter-clockwise through it.
+*/
+function arcSpan(c, circ) {
+	const range = basisInterval(c);
+	const own = curveBounds(c);
+	const forward = basisParam(c, own.last) >= basisParam(c, own.first);
+	return {
+		start: circ.sense ? range.first : -range.last,
+		sweep: Math.min(range.last - range.first, 2 * Math.PI),
+		ccw: circ.sense === forward
+	};
+}
+/** The arc of `circ` from angle `from` counter-clockwise to `to`, traversed as `ccw` says. */
+function arcBetween(circ, from, to, ccw) {
+	const basis = makeCircle2d$1(circ.cx, circ.cy, circ.radius, ccw);
+	return ccw ? {
+		__bk2d: "trimmed",
+		basis,
+		tStart: from,
+		tEnd: to
+	} : {
+		__bk2d: "trimmed",
+		basis,
+		tStart: -to,
+		tEnd: -from
+	};
+}
+/**
+* Overlap of two arcs on the same circle: the shared stretches as segments oriented
+* along c1, and the places where the arcs only touch end to end as points.
+*/
+function intersectCoincidentArcs(c1, circ1, c2, circ2, tol) {
+	const turn = 2 * Math.PI;
+	const a = arcSpan(c1, circ1);
+	const b = arcSpan(c2, circ2);
+	const angleTol = tol / circ1.radius;
+	const isFull = (sweep) => turn - sweep <= angleTol;
+	const d = ((b.start - a.start) % turn + turn) % turn;
+	let windows;
+	if (isFull(b.sweep)) windows = [[0, a.sweep]];
+	else if (isFull(a.sweep)) windows = [[d, d + b.sweep]];
+	else windows = [[Math.max(0, d), Math.min(a.sweep, d + b.sweep)], [Math.max(0, d - turn), Math.min(a.sweep, d - turn + b.sweep)]];
+	const points = [];
+	const segments = [];
+	for (const [u, v] of windows) if (v - u > angleTol) segments.push(arcBetween(circ1, a.start + u, a.start + v, a.ccw));
+	else if (v - u > -angleTol) {
+		const angle = a.start + (u + v) / 2;
+		points.push([circ1.cx + circ1.radius * Math.cos(angle), circ1.cy + circ1.radius * Math.sin(angle)]);
 	}
-	const deduped = [];
-	for (const p of pts) if (!deduped.some(([ddx, ddy]) => (ddx - p[0]) ** 2 + (ddy - p[1]) ** 2 < tol * tol * 100)) deduped.push(p);
-	return deduped;
+	return {
+		points,
+		segments
+	};
 }
 function intersectCircleCircle(c1, circ1, c2, circ2, tol) {
 	const dx = circ2.cx - circ1.cx;
 	const dy = circ2.cy - circ1.cy;
 	const d = Math.sqrt(dx * dx + dy * dy);
+	if (d <= tol) {
+		if (Math.abs(circ1.radius - circ2.radius) > tol) return {
+			points: [],
+			segments: []
+		};
+		return intersectCoincidentArcs(c1, circ1, c2, circ2, tol);
+	}
+	return {
+		points: intersectCrossingCircles(c1, circ1, c2, circ2, tol, d),
+		segments: []
+	};
+}
+function intersectCrossingCircles(c1, circ1, c2, circ2, tol, d) {
+	const dx = circ2.cx - circ1.cx;
+	const dy = circ2.cy - circ1.cy;
 	if (d > circ1.radius + circ2.radius + tol) return [];
 	if (d < Math.abs(circ1.radius - circ2.radius) - tol) return [];
-	if (d < 1e-14) {
-		if (Math.abs(circ1.radius - circ2.radius) > tol) return [];
-		return intersectConcentricArcs(c1, c2, tol);
-	}
 	const a = (circ1.radius * circ1.radius - circ2.radius * circ2.radius + d * d) / (2 * d);
 	const h2 = circ1.radius * circ1.radius - a * a;
 	const h = Math.sqrt(Math.max(0, h2));

package/dist/operations.cjs

@@ -1,6 +1,6 @@
 Object.defineProperty(exports, Symbol.toStringTag, { value: "Module" });
-const require_threadFns = require("./threadFns-CzXEnnmo.cjs");
-const require_loftFns = require("./loftFns-D5AvfCGG.cjs");
+const require_threadFns = require("./threadFns-1H60LrFX.cjs");
+const require_loftFns = require("./loftFns-DGV1z2NJ.cjs");
 exports.addChild = require_threadFns.addChild;
 exports.addJoint = require_threadFns.addJoint;
 exports.addStep = require_threadFns.addStep;

package/dist/operations.js

@@ -1,3 +1,3 @@
-import { A as setJointValue, B as walkAssembly, C as cylindricalJoint, D as planarJoint, E as mechanismDOF, F as countNodes, H as circularPattern, I as createAssemblyNode, L as findNode, M as sphericalJoint, N as addChild, O as prismaticJoint, P as collectShapes, R as removeChild, S as addJoint, T as jointTransform, U as gridPattern, V as exportAssemblySTEP, W as linearPattern, Y as createAssembly, _ as exportURDF, b as inverseKinematics, c as modifyStep, d as replayFrom, f as replayHistory, g as undoLast, h as stepsFrom, i as createRegistry, j as setJointValues, k as revoluteJoint, l as registerOperation, m as stepCount, n as addStep, o as findStep, r as createHistory, s as getShape, t as thread, u as registerShape, v as importURDF, w as forwardKinematics, x as jointTrajectory, y as jointsFromDH, z as updateNode } from "./threadFns-DESH7lcs.js";
-import { c as twistExtrude, o as supportExtrude, r as complexExtrude, s as sweep } from "./loftFns-D5NJpHLZ.js";
+import { A as setJointValue, B as walkAssembly, C as cylindricalJoint, D as planarJoint, E as mechanismDOF, F as countNodes, H as circularPattern, I as createAssemblyNode, L as findNode, M as sphericalJoint, N as addChild, O as prismaticJoint, P as collectShapes, R as removeChild, S as addJoint, T as jointTransform, U as gridPattern, V as exportAssemblySTEP, W as linearPattern, Y as createAssembly, _ as exportURDF, b as inverseKinematics, c as modifyStep, d as replayFrom, f as replayHistory, g as undoLast, h as stepsFrom, i as createRegistry, j as setJointValues, k as revoluteJoint, l as registerOperation, m as stepCount, n as addStep, o as findStep, r as createHistory, s as getShape, t as thread, u as registerShape, v as importURDF, w as forwardKinematics, x as jointTrajectory, y as jointsFromDH, z as updateNode } from "./threadFns-CHdY-4Cz.js";
+import { c as twistExtrude, o as supportExtrude, r as complexExtrude, s as sweep } from "./loftFns-DQ7Z29n3.js";
 export { addChild, addJoint, addStep, circularPattern, collectShapes, complexExtrude, countNodes, createAssembly, createAssemblyNode, createHistory, createRegistry, cylindricalJoint, exportAssemblySTEP, exportURDF, findNode, findStep, forwardKinematics, getShape as getHistoryShape, gridPattern, importURDF, inverseKinematics, jointTrajectory, jointTransform, jointsFromDH, linearPattern, mechanismDOF, modifyStep, planarJoint, prismaticJoint, registerOperation, registerShape, removeChild, replayFrom, replayHistory, revoluteJoint, setJointValue, setJointValues, sphericalJoint, stepCount, stepsFrom, supportExtrude, sweep, thread, twistExtrude, undoLast, updateNode, walkAssembly };

package/dist/{originTrackingFns-CBnyKLm7.js → originTrackingFns-c2qgRZ_9.js}

@@ -1,5 +1,5 @@
-import { q as getKernel } from "./shapeTypes-DwvQUp9M.js";
-import { C as subShapeHashes, c as getFaces, l as getOrCreateCache, r as getCacheEntry } from "./topologyQueryFns-LXV1nTaS.js";
+import { q as getKernel } from "./shapeTypes-BNGu103j.js";
+import { C as subShapeHashes, c as getFaces, l as getOrCreateCache, r as getCacheEntry } from "./topologyQueryFns-CltEv7Pi.js";
 import { n as HASH_CODE_MAX } from "./constants-iraOnb2p.js";
 // src/topology/metadata/originTrackingFns.ts
 /**

package/dist/{originTrackingFns-CHymOLLm.cjs → originTrackingFns-rEKOAP65.cjs}

@@ -1,5 +1,5 @@
-const require_shapeTypes = require("./shapeTypes-Dc7j-MYg.cjs");
-const require_topologyQueryFns = require("./topologyQueryFns-5Frx8Y-0.cjs");
+const require_shapeTypes = require("./shapeTypes-MUEH4XuH.cjs");
+const require_topologyQueryFns = require("./topologyQueryFns-C_fXO6xL.cjs");
 const require_constants = require("./constants-oee0S_x6.cjs");
 // src/topology/metadata/originTrackingFns.ts
 /**

package/dist/{primitiveFns-DeNl60Rw.js → primitiveFns-3-gs-FUX.js}

@@ -1,10 +1,10 @@
-import { E as GeometryCleanupError, G as _usingCtx, d as createSolid, n as castResultShape, q as getKernel } from "./shapeTypes-DwvQUp9M.js";
+import { E as GeometryCleanupError, G as _usingCtx, d as createSolid, n as castResultShape, q as getKernel } from "./shapeTypes-BNGu103j.js";
 import { E as ok, d as validationError, g as err, m as andThen, t as BrepErrorCode } from "./errors-BTccWbtE.js";
-import { n as isClosedWire } from "./validityTypes-DM-Iwe8N.js";
+import { n as isClosedWire } from "./validityTypes-GanLrmvY.js";
 import { n as HASH_CODE_MAX, t as DEG2RAD } from "./constants-iraOnb2p.js";
 import { d as vecNormalize, h as vecScale } from "./vecOps-S-m9H_fe.js";
-import { C as propagateAllMetadata, S as hasAnyMetadata, T as propagateMetadataThroughRelocation, a as makeOffset, c as makeTorus, i as makeEllipsoid, l as makeVertex, n as makeCone, o as makeSolid, r as makeCylinder, s as makeSphere, t as makeCompound, u as weldShellsAndFaces, w as propagateMetadataByHash, x as collectInputFaceHashes } from "./solidBuilders-DT1gpVWM.js";
-import { _ as makeThreePointArc, a as makeNonPlanarFace, c as makeBSplineApproximation, d as makeCircle, f as makeEllipse, g as makeTangentArc, h as makeLine, i as makeNewFaceWithinFace, m as makeHelix, o as makePolygon, p as makeEllipseArc, r as makeFace, s as assembleWire, t as addHolesInFace, u as makeBezierCurve } from "./surfaceBuilders-CPLe0bbk.js";
+import { C as propagateAllMetadata, S as hasAnyMetadata, T as propagateMetadataThroughRelocation, a as makeOffset, c as makeTorus, i as makeEllipsoid, l as makeVertex, n as makeCone, o as makeSolid, r as makeCylinder, s as makeSphere, t as makeCompound, u as weldShellsAndFaces, w as propagateMetadataByHash, x as collectInputFaceHashes } from "./solidBuilders-Bmr59cGp.js";
+import { _ as makeThreePointArc, a as makeNonPlanarFace, c as makeBSplineApproximation, d as makeCircle, f as makeEllipse, g as makeTangentArc, h as makeLine, i as makeNewFaceWithinFace, m as makeHelix, o as makePolygon, p as makeEllipseArc, r as makeFace, s as assembleWire, t as addHolesInFace, u as makeBezierCurve } from "./surfaceBuilders-DI376ai0.js";
 // src/topology/transformFns.ts
 /**
 * Immutable shape transforms — translate, rotate, scale, mirror, applyMatrix.

package/dist/{primitiveFns-BVeBEaa4.cjs → primitiveFns-CLGVLwG8.cjs}

@@ -1,10 +1,10 @@
-const require_shapeTypes = require("./shapeTypes-Dc7j-MYg.cjs");
+const require_shapeTypes = require("./shapeTypes-MUEH4XuH.cjs");
 const require_errors = require("./errors-O_blYTWT.cjs");
-const require_validityTypes = require("./validityTypes-C6rROGTP.cjs");
+const require_validityTypes = require("./validityTypes-CGX2ES81.cjs");
 const require_constants = require("./constants-oee0S_x6.cjs");
 const require_vecOps = require("./vecOps-CrGEPPQM.cjs");
-const require_solidBuilders = require("./solidBuilders-iS5DDwg8.cjs");
-const require_surfaceBuilders = require("./surfaceBuilders-BvwSgD3C.cjs");
+const require_solidBuilders = require("./solidBuilders-DdG4NPHM.cjs");
+const require_surfaceBuilders = require("./surfaceBuilders-DOmDVuMs.cjs");
 // src/topology/transformFns.ts
 /**
 * Immutable shape transforms — translate, rotate, scale, mirror, applyMatrix.

package/dist/{principalBoxFns-CG6kG7vT.cjs → principalBoxFns-CiXzjOkr.cjs}

@@ -1,9 +1,9 @@
-const require_shapeTypes = require("./shapeTypes-Dc7j-MYg.cjs");
+const require_shapeTypes = require("./shapeTypes-MUEH4XuH.cjs");
 const require_bug = require("./bug-CBcpIPuf.cjs");
 const require_errors = require("./errors-O_blYTWT.cjs");
-const require_topologyQueryFns = require("./topologyQueryFns-5Frx8Y-0.cjs");
+const require_topologyQueryFns = require("./topologyQueryFns-C_fXO6xL.cjs");
 const require_vecOps = require("./vecOps-CrGEPPQM.cjs");
-const require_measureFns = require("./measureFns-CZHNWkiA.cjs");
+const require_measureFns = require("./measureFns-BdSjw5fr.cjs");
 // src/measurement/principalBoxFns.ts
 /**
 * Principal-axes bounding box: a solid's extent measured in the frame of its

package/dist/{principalBoxFns-3mW_hA6z.js → principalBoxFns-RMZItjfR.js}

@@ -1,9 +1,9 @@
-import { G as _usingCtx, n as castResultShape, q as getKernel } from "./shapeTypes-DwvQUp9M.js";
+import { G as _usingCtx, n as castResultShape, q as getKernel } from "./shapeTypes-BNGu103j.js";
 import { i as wasmIndex } from "./bug-ClMTAJhe.js";
 import { E as ok, d as validationError, g as err, t as BrepErrorCode, u as unsupportedError } from "./errors-BTccWbtE.js";
-import { E as kernelCallRaw, S as subShapeCount } from "./topologyQueryFns-LXV1nTaS.js";
+import { E as kernelCallRaw, S as subShapeCount } from "./topologyQueryFns-CltEv7Pi.js";
 import { r as vecCross } from "./vecOps-S-m9H_fe.js";
-import { f as getCachedMeasurement, p as setCachedMeasurement } from "./measureFns-mxBdPiWa.js";
+import { f as getCachedMeasurement, p as setCachedMeasurement } from "./measureFns-BrdCH4cH.js";
 // src/measurement/principalBoxFns.ts
 /**
 * Principal-axes bounding box: a solid's extent measured in the frame of its

package/dist/projection.cjs

@@ -1,5 +1,5 @@
 Object.defineProperty(exports, Symbol.toStringTag, { value: "Module" });
-const require_cameraFns = require("./cameraFns-RqraCXIc.cjs");
+const require_cameraFns = require("./cameraFns-BAtzhCYM.cjs");
 exports.PROJECTION_PLANES = require_cameraFns.PROJECTION_PLANES;
 exports.cameraFromPlane = require_cameraFns.cameraFromPlane;
 exports.cameraLookAt = require_cameraFns.cameraLookAt;

package/dist/projection.js

@@ -1 +1 @@
-export { o as PROJECTION_PLANES, t as cameraFromPlane, n as cameraLookAt, r as createCamera, s as isProjectionPlane, a as makeProjectedEdges, i as projectEdges } from "./cameraFns-CrClIkmV.js";
+export { o as PROJECTION_PLANES, t as cameraFromPlane, n as cameraLookAt, r as createCamera, s as isProjectionPlane, a as makeProjectedEdges, i as projectEdges } from "./cameraFns-BVWyAscu.js";

package/dist/query.cjs

@@ -1,6 +1,6 @@
 Object.defineProperty(exports, Symbol.toStringTag, { value: "Module" });
-const require_helpers = require("./helpers-DKEVm6Hu.cjs");
-const require_cornerFinder = require("./cornerFinder-CdOe1Wrb.cjs");
+const require_helpers = require("./helpers-BdGGaLhF.cjs");
+const require_cornerFinder = require("./cornerFinder-e4Wc7_yp.cjs");
 exports.cornerFinder = require_cornerFinder.cornerFinder;
 exports.edgeFinder = require_helpers.edgeFinder;
 exports.faceFinder = require_helpers.faceFinder;

package/dist/query.js

@@ -1,3 +1,3 @@
-import { n as edgeFinder, r as faceFinder, t as getSingleFace } from "./helpers-D2hANLRu.js";
-import { t as cornerFinder } from "./cornerFinder-BZuQkRp2.js";
+import { n as edgeFinder, r as faceFinder, t as getSingleFace } from "./helpers-DpGcM2qZ.js";
+import { t as cornerFinder } from "./cornerFinder-Dv_2rmaY.js";
 export { cornerFinder, edgeFinder, faceFinder, getSingleFace };

package/dist/{refResolveFns-BAs4p9z7.cjs → refResolveFns-DNX0bCrP.cjs}

@@ -1,10 +1,10 @@
-const require_shapeTypes = require("./shapeTypes-Dc7j-MYg.cjs");
-const require_topologyQueryFns = require("./topologyQueryFns-5Frx8Y-0.cjs");
-const require_faceFns = require("./faceFns-B7MiDYj1.cjs");
+const require_shapeTypes = require("./shapeTypes-MUEH4XuH.cjs");
+const require_topologyQueryFns = require("./topologyQueryFns-C_fXO6xL.cjs");
+const require_faceFns = require("./faceFns-C-2ttg8X.cjs");
 const require_faceRoleFns = require("./faceRoleFns-Db5bYj4Q.cjs");
-const require_shapeFns = require("./shapeFns-C0w8vvfb.cjs");
-const require_measureFns = require("./measureFns-CZHNWkiA.cjs");
-const require_adjacencyFns = require("./adjacencyFns-BFJfaUwX.cjs");
+const require_shapeFns = require("./shapeFns-SgIrOjN4.cjs");
+const require_measureFns = require("./measureFns-BdSjw5fr.cjs");
+const require_adjacencyFns = require("./adjacencyFns-mMmTBUBY.cjs");
 // src/topology/shapeRef/scoring.ts
 /**
 * Default face scorer combining surface type, normal alignment, centroid proximity,

package/dist/{refResolveFns-DHx1Y3GG.js → refResolveFns-kJg2iCad.js}

@@ -1,10 +1,10 @@
-import { g as disposeTransientSubShape, o as castShapeWithKnownType, q as getKernel } from "./shapeTypes-DwvQUp9M.js";
-import { c as getFaces, w as vertexPosition } from "./topologyQueryFns-LXV1nTaS.js";
-import { i as faceGeomType, l as normalAt, r as faceCenter } from "./faceFns-iVPbTxki.js";
+import { g as disposeTransientSubShape, o as castShapeWithKnownType, q as getKernel } from "./shapeTypes-BNGu103j.js";
+import { c as getFaces, w as vertexPosition } from "./topologyQueryFns-CltEv7Pi.js";
+import { i as faceGeomType, l as normalAt, r as faceCenter } from "./faceFns-Q87HCJrp.js";
 import { t as getFaceRoles } from "./faceRoleFns-BPxzQF-n.js";
-import { n as getHashCode } from "./shapeFns-CgqKICF_.js";
-import { n as measureArea, s as measureLength } from "./measureFns-mxBdPiWa.js";
-import { a as facesOfVertex, c as verticesOfFace, i as facesOfEdge, o as sharedEdges, s as verticesOfEdge, t as adjacentFaceHashes } from "./adjacencyFns--KmBIKYJ.js";
+import { n as getHashCode } from "./shapeFns-CZ6VF1yd.js";
+import { n as measureArea, s as measureLength } from "./measureFns-BrdCH4cH.js";
+import { a as facesOfVertex, c as verticesOfFace, i as facesOfEdge, o as sharedEdges, s as verticesOfEdge, t as adjacentFaceHashes } from "./adjacencyFns-hMihivxC.js";
 // src/topology/shapeRef/scoring.ts
 /**
 * Default face scorer combining surface type, normal alignment, centroid proximity,

package/dist/{shapeFns-CgqKICF_.js → shapeFns-CZ6VF1yd.js}

@@ -1,6 +1,6 @@
-import { q as getKernel } from "./shapeTypes-DwvQUp9M.js";
+import { q as getKernel } from "./shapeTypes-BNGu103j.js";
 import { t as BrepErrorCode } from "./errors-BTccWbtE.js";
-import { E as kernelCallRaw, T as kernelCall } from "./topologyQueryFns-LXV1nTaS.js";
+import { E as kernelCallRaw, T as kernelCall } from "./topologyQueryFns-CltEv7Pi.js";
 import { n as HASH_CODE_MAX } from "./constants-iraOnb2p.js";
 // src/topology/shapeFns.ts
 /**

package/dist/{shapeFns-C0w8vvfb.cjs → shapeFns-SgIrOjN4.cjs}

@@ -1,6 +1,6 @@
-const require_shapeTypes = require("./shapeTypes-Dc7j-MYg.cjs");
+const require_shapeTypes = require("./shapeTypes-MUEH4XuH.cjs");
 const require_errors = require("./errors-O_blYTWT.cjs");
-const require_topologyQueryFns = require("./topologyQueryFns-5Frx8Y-0.cjs");
+const require_topologyQueryFns = require("./topologyQueryFns-C_fXO6xL.cjs");
 const require_constants = require("./constants-oee0S_x6.cjs");
 // src/topology/shapeFns.ts
 /**

package/dist/shapeRef.cjs

@@ -1,5 +1,5 @@
 Object.defineProperty(exports, Symbol.toStringTag, { value: "Module" });
-const require_refResolveFns = require("./refResolveFns-BAs4p9z7.cjs");
+const require_refResolveFns = require("./refResolveFns-DNX0bCrP.cjs");
 exports.assignRoles = require_refResolveFns.assignRoles;
 exports.captureHint = require_refResolveFns.captureHint;
 exports.createDerivedFaceRef = require_refResolveFns.createDerivedFaceRef;

package/dist/shapeRef.js

@@ -1 +1 @@
-export { h as assignRoles, g as captureHint, l as createDerivedFaceRef, p as createEdgeRef, _ as createRef, d as createVertexRef, b as defaultScorer, t as isDerivedFaceRef, n as isEdgeRef, r as isFaceRef, i as isLineageRef, a as isVertexRef, u as resolveDerivedFaceRef, m as resolveEdgeRef, o as resolveLineageRef, v as resolveRef, s as resolveRefIn, c as resolveRefParams, f as resolveVertexRef, y as updateRoles } from "./refResolveFns-DHx1Y3GG.js";
+export { h as assignRoles, g as captureHint, l as createDerivedFaceRef, p as createEdgeRef, _ as createRef, d as createVertexRef, b as defaultScorer, t as isDerivedFaceRef, n as isEdgeRef, r as isFaceRef, i as isLineageRef, a as isVertexRef, u as resolveDerivedFaceRef, m as resolveEdgeRef, o as resolveLineageRef, v as resolveRef, s as resolveRefIn, c as resolveRefParams, f as resolveVertexRef, y as updateRoles } from "./refResolveFns-kJg2iCad.js";

package/dist/{shapeTypes-DwvQUp9M.js → shapeTypes-BNGu103j.js}

@@ -1,4 +1,4 @@
-import { A as UnsupportedKernelOperationError, C as reverseCurve2d$2, D as tangentCurve2d, E as serializeCurve2d$2, N as EXACT_BREP_CAPABILITIES, O as translateCurve2d$2, P as OCCT_CAPABILITIES, S as offsetCurve2d$2, T as scaleCurve2d$2, _ as makeCircle2d$2, a as buildAsciiSTL, b as mirrorAcrossAxis, c as createBBox2d, d as deserializeCurve2d$2, f as evaluateCurve2d$2, g as makeBezier2d$2, h as makeArc2dThreePoints, i as DEFAULT_STL_TOLERANCE, j as isUnsupportedKernelOperationError, k as quickHull, l as curveBounds, m as makeArc2dTangent, o as buildBinarySTL, p as intersectCurves2dFn, r as DEFAULT_STL_ANGULAR_TOLERANCE, s as addCurveToBBox, t as OcctWasmAdapter, u as curveTypeName, v as makeEllipse2d$2, w as rotateCurve2d$2, x as mirrorAtPoint, y as makeLine2d$2 } from "./occtWasmAdapter-B9d0Q0Vl.js";
+import { A as UnsupportedKernelOperationError, C as reverseCurve2d$2, D as tangentCurve2d, E as serializeCurve2d$2, N as EXACT_BREP_CAPABILITIES, O as translateCurve2d$2, P as OCCT_CAPABILITIES, S as offsetCurve2d$2, T as scaleCurve2d$2, _ as makeCircle2d$2, a as buildAsciiSTL, b as mirrorAcrossAxis, c as createBBox2d, d as deserializeCurve2d$2, f as evaluateCurve2d$2, g as makeBezier2d$2, h as makeArc2dThreePoints, i as DEFAULT_STL_TOLERANCE, j as isUnsupportedKernelOperationError, k as quickHull, l as curveBounds, m as makeArc2dTangent, o as buildBinarySTL, p as intersectCurves2dFn, r as DEFAULT_STL_ANGULAR_TOLERANCE, s as addCurveToBBox, t as OcctWasmAdapter, u as curveTypeName, v as makeEllipse2d$2, w as rotateCurve2d$2, x as mirrorAtPoint, y as makeLine2d$2 } from "./occtWasmAdapter-DA7oMgcQ.js";
 import { i as wasmIndex, r as vec3At } from "./bug-ClMTAJhe.js";
 // src/kernel/quality.ts
 /**

package/dist/{shapeTypes-Dc7j-MYg.cjs → shapeTypes-MUEH4XuH.cjs}

@@ -1,4 +1,4 @@
-const require_occtWasmAdapter = require("./occtWasmAdapter-DVxLkjlJ.cjs");
+const require_occtWasmAdapter = require("./occtWasmAdapter-D3qerQTq.cjs");
 const require_bug = require("./bug-CBcpIPuf.cjs");
 // src/kernel/quality.ts
 /**

package/dist/sketching.cjs

@@ -1,7 +1,7 @@
 Object.defineProperty(exports, Symbol.toStringTag, { value: "Module" });
-const require_blueprintSketcher = require("./blueprintSketcher-Di376t-0.cjs");
-const require_drawFns = require("./drawFns-71cOhWD-.cjs");
-const require_textBlueprints = require("./textBlueprints-CNPCPJix.cjs");
+const require_blueprintSketcher = require("./blueprintSketcher-BG--DxWB.cjs");
+const require_drawFns = require("./drawFns-d-RvC6u6.cjs");
+const require_textBlueprints = require("./textBlueprints-B7Vhr0xu.cjs");
 // src/sketching.ts
 /**
 * brepjs/sketching — Sketcher, Drawing, and sketch-to-shape operations.

package/dist/sketching.js

@@ -1,6 +1,6 @@
-import { n as BaseSketcher2d, t as BlueprintSketcher } from "./blueprintSketcher-D_Faf0GO.js";
-import { A as sketchEllipse, C as DrawingPen, D as makeBaseBox, E as deserializeDrawing, F as sketchRectangle, I as sketchRoundedRectangle, L as FaceSketcher, M as sketchHelix, N as sketchParametricFunction, O as polysideInnerRadius, P as sketchPolysides, R as Sketcher, S as drawText, T as Drawing, _ as drawPolysides, a as drawingIntersect, b as drawSingleCircle, c as rotateDrawing, d as drawFaceOutline, f as drawProjection, g as drawPointsInterpolation, h as drawParametricFunction, i as drawingFuse, j as sketchFaceOffset, k as sketchCircle, l as scaleDrawing, m as drawEllipse, n as drawingCut, o as drawingToSketchOnPlane, p as drawCircle, r as drawingFillet, s as mirrorDrawing, t as drawingChamfer, u as translateDrawing, v as drawRectangle, w as draw, x as drawSingleEllipse, y as drawRoundedRectangle } from "./drawFns-DxDwJ5zZ.js";
-import { a as Sketches, c as compoundSketchFace, d as sketchExtrude, f as sketchFace, g as sketchWires, h as sketchSweep, l as compoundSketchLoft, m as sketchRevolve, o as Sketch, p as sketchLoft, s as compoundSketchExtrude, u as compoundSketchRevolve, y as CompoundSketch } from "./textBlueprints-BU0Rhk54.js";
+import { n as BaseSketcher2d, t as BlueprintSketcher } from "./blueprintSketcher-C1WCI6E0.js";
+import { A as sketchEllipse, C as DrawingPen, D as makeBaseBox, E as deserializeDrawing, F as sketchRectangle, I as sketchRoundedRectangle, L as FaceSketcher, M as sketchHelix, N as sketchParametricFunction, O as polysideInnerRadius, P as sketchPolysides, R as Sketcher, S as drawText, T as Drawing, _ as drawPolysides, a as drawingIntersect, b as drawSingleCircle, c as rotateDrawing, d as drawFaceOutline, f as drawProjection, g as drawPointsInterpolation, h as drawParametricFunction, i as drawingFuse, j as sketchFaceOffset, k as sketchCircle, l as scaleDrawing, m as drawEllipse, n as drawingCut, o as drawingToSketchOnPlane, p as drawCircle, r as drawingFillet, s as mirrorDrawing, t as drawingChamfer, u as translateDrawing, v as drawRectangle, w as draw, x as drawSingleEllipse, y as drawRoundedRectangle } from "./drawFns-Cl1i8B_B.js";
+import { a as Sketches, c as compoundSketchFace, d as sketchExtrude, f as sketchFace, g as sketchWires, h as sketchSweep, l as compoundSketchLoft, m as sketchRevolve, o as Sketch, p as sketchLoft, s as compoundSketchExtrude, u as compoundSketchRevolve, y as CompoundSketch } from "./textBlueprints-CE0oxB43.js";
 // src/sketching.ts
 /**
 * brepjs/sketching — Sketcher, Drawing, and sketch-to-shape operations.

package/dist/{solidBuilders-DT1gpVWM.js → solidBuilders-Bmr59cGp.js}

@@ -1,14 +1,14 @@
-import { C as isSolid, D as getShapeKind, E as GeometryCleanupError, G as _usingCtx, S as isShell, d as createSolid, f as createVertex, h as disposeResultShape, n as castResultShape, q as getKernel, s as createCompound, x as isShape3D } from "./shapeTypes-DwvQUp9M.js";
+import { C as isSolid, D as getShapeKind, E as GeometryCleanupError, G as _usingCtx, S as isShell, d as createSolid, f as createVertex, h as disposeResultShape, n as castResultShape, q as getKernel, s as createCompound, x as isShape3D } from "./shapeTypes-BNGu103j.js";
 import { E as ok, P as unwrap, b as isErr, d as validationError, g as err, i as kernelError, l as typeCastError, m as andThen, t as BrepErrorCode } from "./errors-BTccWbtE.js";
-import { C as subShapeHashes, c as getFaces, f as getVertices, p as getWires, s as getEdges } from "./topologyQueryFns-LXV1nTaS.js";
+import { C as subShapeHashes, c as getFaces, f as getVertices, p as getWires, s as getEdges } from "./topologyQueryFns-CltEv7Pi.js";
 import { n as HASH_CODE_MAX } from "./constants-iraOnb2p.js";
 import { a as vecDot, g as vecSub, h as vecScale, t as vecAdd } from "./vecOps-S-m9H_fe.js";
 import { o as resolvePlane } from "./planeOps-D3yDuMux.js";
-import { _ as cast, y as downcast } from "./faceFns-iVPbTxki.js";
-import { n as propagateOriginsByHash, r as propagateOriginsFromEvolution, t as getFaceOrigins } from "./originTrackingFns-CBnyKLm7.js";
+import { _ as cast, y as downcast } from "./faceFns-Q87HCJrp.js";
+import { n as propagateOriginsByHash, r as propagateOriginsFromEvolution, t as getFaceOrigins } from "./originTrackingFns-c2qgRZ_9.js";
 import { n as hasFaceRoles, r as propagateFaceRolesFromEvolution } from "./faceRoleFns-BPxzQF-n.js";
 import { n as getAtOrThrow, t as firstOrThrow } from "./arrayAccess-BpgouNir.js";
-import { r as makeFace } from "./surfaceBuilders-CPLe0bbk.js";
+import { r as makeFace } from "./surfaceBuilders-DI376ai0.js";
 // src/topology/metadata/faceTagFns.ts
 var shapeTagStore = /* @__PURE__ */ new WeakMap();
 var tagMetadataStore = /* @__PURE__ */ new WeakMap();