brepjs 20.12.5 → 20.12.6

package/dist/2d/lib/offset.d.ts

@@ -10,7 +10,7 @@ import { Point2D } from './definitions.js';
  * instead of a `Curve2D`.
  *
  * @param curve - The source curve to offset.
- * @param offset - Signed offset distance (positive = left of curve direction).
+ * @param offset - Signed offset distance (positive = right of curve direction).
  *
  * @remarks Self-intersecting offset curves are replaced with a collapsed
  *   sentinel. This is a known simplification; a more robust trimming strategy

package/dist/2d.cjs

@@ -1,11 +1,11 @@
 Object.defineProperty(exports, Symbol.toStringTag, { value: "Module" });
-const require_shapeTypes = require("./shapeTypes-D938X2mg.cjs");
+const require_shapeTypes = require("./shapeTypes-Dc7j-MYg.cjs");
 const require_errors = require("./errors-O_blYTWT.cjs");
-const require_topologyQueryFns = require("./topologyQueryFns-4WYqtSFF.cjs");
-const require_blueprintSketcher = require("./blueprintSketcher-CZyokLGJ.cjs");
-const require_blueprint = require("./blueprint-ERmwk6zG.cjs");
-const require_boolean2D = require("./boolean2D-CRuNKgXs.cjs");
-const require_blueprintFns = require("./blueprintFns-B_sxtIo7.cjs");
+const require_topologyQueryFns = require("./topologyQueryFns-5Frx8Y-0.cjs");
+const require_blueprintSketcher = require("./blueprintSketcher-Di376t-0.cjs");
+const require_blueprint = require("./blueprint-D83DDDPb.cjs");
+const require_boolean2D = require("./boolean2D-CNZFI_y8.cjs");
+const require_blueprintFns = require("./blueprintFns-C4TQn-x_.cjs");
 // src/core/curve2dHandle.ts
 /**
 * Wrap a raw kernel 2D curve handle with brand + disposal tracking.

package/dist/2d.js

@@ -1,10 +1,10 @@
-import { F as createKernelHandle, J as getKernel2D, c as createEdge } from "./shapeTypes-PNVEv6ga.js";
+import { F as createKernelHandle, J as getKernel2D, c as createEdge } from "./shapeTypes-DwvQUp9M.js";
 import { E as ok, d as validationError, g as err, t as BrepErrorCode } from "./errors-BTccWbtE.js";
-import { E as kernelCallRaw } from "./topologyQueryFns-BZUY10TD.js";
-import { a as Blueprints, i as CompoundBlueprint, r as organiseBlueprints } from "./blueprintSketcher-CwTAtrkY.js";
-import { t as Blueprint, v as Curve2D, x as BoundingBox2d } from "./blueprint-Zmt5-07y.js";
-import { a as fuseBlueprints, c as roundedRectangleBlueprint, i as cutBlueprints, n as fuse2D, o as intersectBlueprints, r as intersect2D, s as polysidesBlueprint, t as cut2D } from "./boolean2D-yUpS8onH.js";
-import { S as reverseCurve, _ as curve2dIsOnCurve, a as isInside2D, b as curve2dSplitAt, c as scale2D, d as stretch2D, f as toSVGPathD, g as curve2dFirstPoint, h as curve2dDistanceFrom, i as getOrientation2D, l as sketchOnFace2D, m as curve2dBoundingBox, o as mirror2D, p as translate2D, r as getBounds2D, s as rotate2D, t as createBlueprint, u as sketchOnPlane2D, v as curve2dLastPoint, x as curve2dTangentAt, y as curve2dParameter } from "./blueprintFns-Dtm-XukP.js";
+import { E as kernelCallRaw } from "./topologyQueryFns-LXV1nTaS.js";
+import { a as Blueprints, i as CompoundBlueprint, r as organiseBlueprints } from "./blueprintSketcher-D_Faf0GO.js";
+import { t as Blueprint, v as Curve2D, x as BoundingBox2d } from "./blueprint-BhIk9Pvm.js";
+import { a as fuseBlueprints, c as roundedRectangleBlueprint, i as cutBlueprints, n as fuse2D, o as intersectBlueprints, r as intersect2D, s as polysidesBlueprint, t as cut2D } from "./boolean2D-DqpCF72W.js";
+import { S as reverseCurve, _ as curve2dIsOnCurve, a as isInside2D, b as curve2dSplitAt, c as scale2D, d as stretch2D, f as toSVGPathD, g as curve2dFirstPoint, h as curve2dDistanceFrom, i as getOrientation2D, l as sketchOnFace2D, m as curve2dBoundingBox, o as mirror2D, p as translate2D, r as getBounds2D, s as rotate2D, t as createBlueprint, u as sketchOnPlane2D, v as curve2dLastPoint, x as curve2dTangentAt, y as curve2dParameter } from "./blueprintFns-eULVgkq9.js";
 // src/core/curve2dHandle.ts
 /**
 * Wrap a raw kernel 2D curve handle with brand + disposal tracking.

package/dist/{adjacencyFns-B2Po1gPs.js → adjacencyFns--KmBIKYJ.js}

@@ -1,6 +1,6 @@
-import { E as GeometryCleanupError, K as getActiveKernelId, q as getKernel, r as castResultShapeWithKnownType, t as borrowShapeWithKnownType } from "./shapeTypes-PNVEv6ga.js";
-import { k as isUnsupportedKernelOperationError } from "./occtWasmAdapter-DlNmVNUn.js";
-import { c as getFaces, f as getVertices, l as getOrCreateCache, s as getEdges } from "./topologyQueryFns-BZUY10TD.js";
+import { E as GeometryCleanupError, K as getActiveKernelId, q as getKernel, r as castResultShapeWithKnownType, t as borrowShapeWithKnownType } from "./shapeTypes-DwvQUp9M.js";
+import { j as isUnsupportedKernelOperationError } from "./occtWasmAdapter-B9d0Q0Vl.js";
+import { c as getFaces, f as getVertices, l as getOrCreateCache, s as getEdges } from "./topologyQueryFns-LXV1nTaS.js";
 import { n as HASH_CODE_MAX } from "./constants-iraOnb2p.js";
 // src/topology/adjacencyFns.ts
 /**

package/dist/{adjacencyFns-Cho9v3Q3.cjs → adjacencyFns-BFJfaUwX.cjs}

@@ -1,6 +1,6 @@
-const require_shapeTypes = require("./shapeTypes-D938X2mg.cjs");
-const require_occtWasmAdapter = require("./occtWasmAdapter-DeoeK2iJ.cjs");
-const require_topologyQueryFns = require("./topologyQueryFns-4WYqtSFF.cjs");
+const require_shapeTypes = require("./shapeTypes-Dc7j-MYg.cjs");
+const require_occtWasmAdapter = require("./occtWasmAdapter-DVxLkjlJ.cjs");
+const require_topologyQueryFns = require("./topologyQueryFns-5Frx8Y-0.cjs");
 const require_constants = require("./constants-oee0S_x6.cjs");
 // src/topology/adjacencyFns.ts
 /**

package/dist/{blueprint-Zmt5-07y.js → blueprint-BhIk9Pvm.js}

@@ -1,14 +1,14 @@
-import { B as unregisterFromCleanup, J as getKernel2D, R as registerForCleanup, c as createEdge, p as createWire, q as getKernel } from "./shapeTypes-PNVEv6ga.js";
+import { B as unregisterFromCleanup, J as getKernel2D, R as registerForCleanup, c as createEdge, p as createWire, q as getKernel } from "./shapeTypes-DwvQUp9M.js";
 import { i as wasmIndex, n as bug } from "./bug-ClMTAJhe.js";
 import { E as ok, P as unwrap, d as validationError, g as err, n as computationError } from "./errors-BTccWbtE.js";
 import { r as RAD2DEG, t as DEG2RAD } from "./constants-iraOnb2p.js";
 import { r as toVec3 } from "./types-CKXsIm9-.js";
 import { r as makePlane } from "./planeOps-D3yDuMux.js";
-import { _ as cast, h as uvCoordinates, i as faceGeomType, m as uvBounds, r as faceCenter } from "./faceFns-lE2OvBfq.js";
-import { p as getOrientation } from "./curveFns-BGPSFUWB.js";
+import { _ as cast, h as uvCoordinates, i as faceGeomType, m as uvBounds, r as faceCenter } from "./faceFns-iVPbTxki.js";
+import { p as getOrientation } from "./curveFns-BP3srCfK.js";
 import { n as getAtOrThrow, r as lastOrThrow, t as firstOrThrow } from "./arrayAccess-BpgouNir.js";
-import { r as makeFace } from "./surfaceBuilders-CrO_BBKM.js";
-import { l as add2d, m as normalize2d$1, p as distance2d, t as getSingleFace, v as samePoint, x as subtract2d, y as scalarMultiply2d } from "./helpers-CNgipe6l.js";
+import { r as makeFace } from "./surfaceBuilders-CPLe0bbk.js";
+import { l as add2d, m as normalize2d$1, p as distance2d, t as getSingleFace, v as samePoint, x as subtract2d, y as scalarMultiply2d } from "./helpers-D2hANLRu.js";
 // src/2d/lib/definitions.ts
 /** Type guard that checks whether a value is a `Point2D`. */
 function isPoint2D(point) {
@@ -256,9 +256,8 @@ var Curve2D = class Curve2D {
 		const tmpPt = this._firstPoint;
 		this._firstPoint = this._lastPoint;
 		this._lastPoint = tmpPt;
-		const tmpParam = this._firstParameter;
-		this._firstParameter = this._lastParameter;
-		this._lastParameter = tmpParam;
+		this._firstParameter = null;
+		this._lastParameter = null;
 	}
 	distanceFromPoint(point) {
 		const proj = getKernel().projectPointOnCurve2d(this.wrapped, point[0], point[1]);

package/dist/{blueprint-ERmwk6zG.cjs → blueprint-D83DDDPb.cjs}

@@ -1,14 +1,14 @@
-const require_shapeTypes = require("./shapeTypes-D938X2mg.cjs");
+const require_shapeTypes = require("./shapeTypes-Dc7j-MYg.cjs");
 const require_bug = require("./bug-CBcpIPuf.cjs");
 const require_errors = require("./errors-O_blYTWT.cjs");
 const require_constants = require("./constants-oee0S_x6.cjs");
 const require_types = require("./types-CjF9Rofr.cjs");
 const require_planeOps = require("./planeOps-DZfLToKZ.cjs");
-const require_faceFns = require("./faceFns-Cx7cwUMx.cjs");
-const require_curveFns = require("./curveFns-BKT4Sg8q.cjs");
+const require_faceFns = require("./faceFns-B7MiDYj1.cjs");
+const require_curveFns = require("./curveFns-CyIvQNYT.cjs");
 const require_arrayAccess = require("./arrayAccess-DpJYARwv.cjs");
-const require_surfaceBuilders = require("./surfaceBuilders-BKCiVf7T.cjs");
-const require_helpers = require("./helpers-C4f2MV-r.cjs");
+const require_surfaceBuilders = require("./surfaceBuilders-BvwSgD3C.cjs");
+const require_helpers = require("./helpers-DKEVm6Hu.cjs");
 // src/2d/lib/definitions.ts
 /** Type guard that checks whether a value is a `Point2D`. */
 function isPoint2D(point) {
@@ -256,9 +256,8 @@ var Curve2D = class Curve2D {
 		const tmpPt = this._firstPoint;
 		this._firstPoint = this._lastPoint;
 		this._lastPoint = tmpPt;
-		const tmpParam = this._firstParameter;
-		this._firstParameter = this._lastParameter;
-		this._lastParameter = tmpParam;
+		this._firstParameter = null;
+		this._lastParameter = null;
 	}
 	distanceFromPoint(point) {
 		const proj = require_shapeTypes.getKernel().projectPointOnCurve2d(this.wrapped, point[0], point[1]);

package/dist/{blueprintFns-B_sxtIo7.cjs → blueprintFns-C4TQn-x_.cjs}

@@ -1,6 +1,6 @@
 const require_errors = require("./errors-O_blYTWT.cjs");
-const require_blueprintSketcher = require("./blueprintSketcher-CZyokLGJ.cjs");
-const require_blueprint = require("./blueprint-ERmwk6zG.cjs");
+const require_blueprintSketcher = require("./blueprintSketcher-Di376t-0.cjs");
+const require_blueprint = require("./blueprint-D83DDDPb.cjs");
 // src/2d/lib/curve2dFns.ts
 /**
 * Return a reversed copy of the curve (non-mutating).

package/dist/{blueprintFns-Dtm-XukP.js → blueprintFns-eULVgkq9.js}

@@ -1,6 +1,6 @@
 import { E as ok, d as validationError, g as err, t as BrepErrorCode } from "./errors-BTccWbtE.js";
-import { i as CompoundBlueprint } from "./blueprintSketcher-CwTAtrkY.js";
-import { t as Blueprint } from "./blueprint-Zmt5-07y.js";
+import { i as CompoundBlueprint } from "./blueprintSketcher-D_Faf0GO.js";
+import { t as Blueprint } from "./blueprint-BhIk9Pvm.js";
 // src/2d/lib/curve2dFns.ts
 /**
 * Return a reversed copy of the curve (non-mutating).

package/dist/{blueprintSketcher-CwTAtrkY.js → blueprintSketcher-D_Faf0GO.js}

@@ -1,10 +1,10 @@
-import { J as getKernel2D, q as getKernel } from "./shapeTypes-PNVEv6ga.js";
+import { J as getKernel2D, q as getKernel } from "./shapeTypes-DwvQUp9M.js";
 import { i as wasmIndex, n as bug } from "./bug-ClMTAJhe.js";
 import { E as ok, P as unwrap, g as err, n as computationError, s as safeIndex, x as isOk } from "./errors-BTccWbtE.js";
 import { r as RAD2DEG, t as DEG2RAD } from "./constants-iraOnb2p.js";
 import { t as firstOrThrow } from "./arrayAccess-BpgouNir.js";
-import { _ as rotate2d, d as cartesianToPolar, f as crossProduct2d, g as polarToCartesian, h as polarAngle2d, l as add2d, p as distance2d, v as samePoint, x as subtract2d, y as scalarMultiply2d } from "./helpers-CNgipe6l.js";
-import { C as isPoint2D, b as normalize2d, c as make2dBezierCurve, d as make2dEllipseArc, g as approximateAsBSpline, h as make2dThreePointArc, l as make2dCircle, m as make2dTangentArc, n as asSVG, p as make2dSegmentCurve, r as viewbox, s as make2dArcFromCenter, t as Blueprint, v as Curve2D, x as BoundingBox2d } from "./blueprint-Zmt5-07y.js";
+import { _ as rotate2d, b as squareDistance2d, d as cartesianToPolar, f as crossProduct2d, g as polarToCartesian, h as polarAngle2d, l as add2d, p as distance2d, v as samePoint, x as subtract2d, y as scalarMultiply2d } from "./helpers-D2hANLRu.js";
+import { C as isPoint2D, b as normalize2d, c as make2dBezierCurve, d as make2dEllipseArc, g as approximateAsBSpline, h as make2dThreePointArc, l as make2dCircle, m as make2dTangentArc, n as asSVG, p as make2dSegmentCurve, r as viewbox, s as make2dArcFromCenter, t as Blueprint, v as Curve2D, x as BoundingBox2d } from "./blueprint-BhIk9Pvm.js";
 // node_modules/flatqueue/index.js
 /**
 * @typedef {Float64ArrayConstructor | Float32ArrayConstructor |
@@ -609,7 +609,7 @@ var offsetEndPoints = (firstPoint, lastPoint, offset) => {
 * instead of a `Curve2D`.
 *
 * @param curve - The source curve to offset.
-* @param offset - Signed offset distance (positive = left of curve direction).
+* @param offset - Signed offset distance (positive = right of curve direction).
 *
 * @remarks Self-intersecting offset curves are replaced with a collapsed
 *   sentinel. This is a known simplification; a more robust trimming strategy
@@ -627,11 +627,12 @@ var make2dOffset = (curve, offset) => {
 	if (curveType === "CIRCLE") {
 		const circleData = kernel.getCurve2dCircleData(curve.wrapped);
 		if (!circleData) return make2dSegmentCurve(curve.firstPoint, curve.lastPoint);
-		const { cx, cy, radius, isDirect } = circleData;
-		const orientedOffset = offset * (isDirect ? 1 : -1);
+		const { cx, cy, radius } = circleData;
+		const center = [cx, cy];
+		const counterClockwise = crossProduct2d(subtract2d(curve.firstPoint, center), curve.tangentAt(0)) > 0;
+		const orientedOffset = counterClockwise ? offset : -offset;
 		const newRadius = radius + orientedOffset;
 		if (newRadius < 1e-10) {
-			const center = [cx, cy];
 			const offsetViaCenter = (point) => {
 				const [x, y] = normalize2d(subtract2d(point, center));
 				return add2d(point, [orientedOffset * x, orientedOffset * y]);
@@ -642,15 +643,22 @@ var make2dOffset = (curve, offset) => {
 				lastPoint: offsetViaCenter(curve.lastPoint)
 			};
 		}
-		const circleHandle = kernel.makeCircle2d(cx, cy, newRadius, isDirect);
-		const fullCircle = new Curve2D(circleHandle);
-		let trimmedHandle;
+		const radial = (point) => add2d(center, scalarMultiply2d(subtract2d(point, center), newRadius / radius));
+		if (!samePoint(curve.firstPoint, curve.lastPoint)) {
+			const mid = curve.value((curve.firstParameter + curve.lastParameter) / 2);
+			return make2dThreePointArc(radial(curve.firstPoint), radial(mid), radial(curve.lastPoint));
+		}
+		const fullCircle = new Curve2D(kernel.makeCircle2d(cx, cy, newRadius, counterClockwise));
+		const start = radial(curve.firstPoint);
+		if (samePoint(fullCircle.firstPoint, start)) return fullCircle;
 		try {
-			trimmedHandle = kernel.trimCurve2d(fullCircle.wrapped, curve.firstParameter, curve.lastParameter);
+			const proj = kernel.projectPointOnCurve2d(fullCircle.wrapped, start[0], start[1]);
+			const from = proj ? proj.param : fullCircle.firstParameter;
+			const period = fullCircle.lastParameter - fullCircle.firstParameter;
+			return new Curve2D(kernel.trimCurve2d(fullCircle.wrapped, from, from + period));
 		} finally {
 			fullCircle.delete();
 		}
-		return new Curve2D(trimmedHandle);
 	}
 	if (curveType === "LINE") {
 		const { firstPoint, lastPoint } = offsetEndPoints(curve.firstPoint, curve.lastPoint, offset);
@@ -673,6 +681,16 @@ var make2dOffset = (curve, offset) => {
 	return approximation;
 };
 // src/2d/lib/customCorners.ts
+/**
+* The offset curves of a corner can cross more than once (a line and an arc
+* meeting at both ends of a semicircle); the fillet center is the crossing
+* nearest the corner, whatever order the intersector reports them in.
+*/
+function nearestTo(points, corner) {
+	let best;
+	for (const p of points) if (!best || squareDistance2d(p, corner) < squareDistance2d(best, corner)) best = p;
+	return best;
+}
 /** Unwrap an intersection, discarding the common-segment curves the caller does not use. */
 function intersectionPoints(first, second) {
 	const result = unwrap(intersectCurves(first, second));
@@ -733,7 +751,7 @@ function removeCorner(firstCurve, secondCurve, radius) {
 		intersectionResult.value.commonSegments.forEach((c) => {
 			c.delete();
 		});
-		const potentialCenter = intersectionResult.value.intersections.at(-1);
+		const potentialCenter = nearestTo(intersectionResult.value.intersections, firstCurve.lastPoint);
 		if (!isPoint2D(potentialCenter)) return null;
 		const center = potentialCenter;
 		const splitForFillet = (curve, offsetCurve) => {
@@ -831,7 +849,7 @@ function dogboneFilletCurves(firstCurve, secondCurve, radius) {
 		intersectionResult2.value.commonSegments.forEach((c) => {
 			c.delete();
 		});
-		const potentialCenter = intersectionResult2.value.intersections.at(-1);
+		const potentialCenter = nearestTo(intersectionResult2.value.intersections, firstCurve.lastPoint);
 		if (!isPoint2D(potentialCenter)) return [firstCurve, secondCurve];
 		circle = make2dCircle(radius, potentialCenter);
 		const firstInt = intersectionPoints(firstCurve, circle)[0];

package/dist/{blueprintSketcher-CZyokLGJ.cjs → blueprintSketcher-Di376t-0.cjs}

@@ -1,10 +1,10 @@
-const require_shapeTypes = require("./shapeTypes-D938X2mg.cjs");
+const require_shapeTypes = require("./shapeTypes-Dc7j-MYg.cjs");
 const require_bug = require("./bug-CBcpIPuf.cjs");
 const require_errors = require("./errors-O_blYTWT.cjs");
 const require_constants = require("./constants-oee0S_x6.cjs");
 const require_arrayAccess = require("./arrayAccess-DpJYARwv.cjs");
-const require_helpers = require("./helpers-C4f2MV-r.cjs");
-const require_blueprint = require("./blueprint-ERmwk6zG.cjs");
+const require_helpers = require("./helpers-DKEVm6Hu.cjs");
+const require_blueprint = require("./blueprint-D83DDDPb.cjs");
 // node_modules/flatqueue/index.js
 /**
 * @typedef {Float64ArrayConstructor | Float32ArrayConstructor |
@@ -609,7 +609,7 @@ var offsetEndPoints = (firstPoint, lastPoint, offset) => {
 * instead of a `Curve2D`.
 *
 * @param curve - The source curve to offset.
-* @param offset - Signed offset distance (positive = left of curve direction).
+* @param offset - Signed offset distance (positive = right of curve direction).
 *
 * @remarks Self-intersecting offset curves are replaced with a collapsed
 *   sentinel. This is a known simplification; a more robust trimming strategy
@@ -627,11 +627,12 @@ var make2dOffset = (curve, offset) => {
 	if (curveType === "CIRCLE") {
 		const circleData = kernel.getCurve2dCircleData(curve.wrapped);
 		if (!circleData) return require_blueprint.make2dSegmentCurve(curve.firstPoint, curve.lastPoint);
-		const { cx, cy, radius, isDirect } = circleData;
-		const orientedOffset = offset * (isDirect ? 1 : -1);
+		const { cx, cy, radius } = circleData;
+		const center = [cx, cy];
+		const counterClockwise = require_helpers.crossProduct2d(require_helpers.subtract2d(curve.firstPoint, center), curve.tangentAt(0)) > 0;
+		const orientedOffset = counterClockwise ? offset : -offset;
 		const newRadius = radius + orientedOffset;
 		if (newRadius < 1e-10) {
-			const center = [cx, cy];
 			const offsetViaCenter = (point) => {
 				const [x, y] = require_blueprint.normalize2d(require_helpers.subtract2d(point, center));
 				return require_helpers.add2d(point, [orientedOffset * x, orientedOffset * y]);
@@ -642,15 +643,22 @@ var make2dOffset = (curve, offset) => {
 				lastPoint: offsetViaCenter(curve.lastPoint)
 			};
 		}
-		const circleHandle = kernel.makeCircle2d(cx, cy, newRadius, isDirect);
-		const fullCircle = new require_blueprint.Curve2D(circleHandle);
-		let trimmedHandle;
+		const radial = (point) => require_helpers.add2d(center, require_helpers.scalarMultiply2d(require_helpers.subtract2d(point, center), newRadius / radius));
+		if (!require_helpers.samePoint(curve.firstPoint, curve.lastPoint)) {
+			const mid = curve.value((curve.firstParameter + curve.lastParameter) / 2);
+			return require_blueprint.make2dThreePointArc(radial(curve.firstPoint), radial(mid), radial(curve.lastPoint));
+		}
+		const fullCircle = new require_blueprint.Curve2D(kernel.makeCircle2d(cx, cy, newRadius, counterClockwise));
+		const start = radial(curve.firstPoint);
+		if (require_helpers.samePoint(fullCircle.firstPoint, start)) return fullCircle;
 		try {
-			trimmedHandle = kernel.trimCurve2d(fullCircle.wrapped, curve.firstParameter, curve.lastParameter);
+			const proj = kernel.projectPointOnCurve2d(fullCircle.wrapped, start[0], start[1]);
+			const from = proj ? proj.param : fullCircle.firstParameter;
+			const period = fullCircle.lastParameter - fullCircle.firstParameter;
+			return new require_blueprint.Curve2D(kernel.trimCurve2d(fullCircle.wrapped, from, from + period));
 		} finally {
 			fullCircle.delete();
 		}
-		return new require_blueprint.Curve2D(trimmedHandle);
 	}
 	if (curveType === "LINE") {
 		const { firstPoint, lastPoint } = offsetEndPoints(curve.firstPoint, curve.lastPoint, offset);
@@ -673,6 +681,16 @@ var make2dOffset = (curve, offset) => {
 	return approximation;
 };
 // src/2d/lib/customCorners.ts
+/**
+* The offset curves of a corner can cross more than once (a line and an arc
+* meeting at both ends of a semicircle); the fillet center is the crossing
+* nearest the corner, whatever order the intersector reports them in.
+*/
+function nearestTo(points, corner) {
+	let best;
+	for (const p of points) if (!best || require_helpers.squareDistance2d(p, corner) < require_helpers.squareDistance2d(best, corner)) best = p;
+	return best;
+}
 /** Unwrap an intersection, discarding the common-segment curves the caller does not use. */
 function intersectionPoints(first, second) {
 	const result = require_errors.unwrap(intersectCurves(first, second));
@@ -733,7 +751,7 @@ function removeCorner(firstCurve, secondCurve, radius) {
 		intersectionResult.value.commonSegments.forEach((c) => {
 			c.delete();
 		});
-		const potentialCenter = intersectionResult.value.intersections.at(-1);
+		const potentialCenter = nearestTo(intersectionResult.value.intersections, firstCurve.lastPoint);
 		if (!require_blueprint.isPoint2D(potentialCenter)) return null;
 		const center = potentialCenter;
 		const splitForFillet = (curve, offsetCurve) => {
@@ -831,7 +849,7 @@ function dogboneFilletCurves(firstCurve, secondCurve, radius) {
 		intersectionResult2.value.commonSegments.forEach((c) => {
 			c.delete();
 		});
-		const potentialCenter = intersectionResult2.value.intersections.at(-1);
+		const potentialCenter = nearestTo(intersectionResult2.value.intersections, firstCurve.lastPoint);
 		if (!require_blueprint.isPoint2D(potentialCenter)) return [firstCurve, secondCurve];
 		circle = require_blueprint.make2dCircle(radius, potentialCenter);
 		const firstInt = intersectionPoints(firstCurve, circle)[0];

package/dist/{boolean2D-CRuNKgXs.cjs → boolean2D-CNZFI_y8.cjs}

@@ -1,10 +1,10 @@
 const require_bug = require("./bug-CBcpIPuf.cjs");
 const require_errors = require("./errors-O_blYTWT.cjs");
 const require_arrayAccess = require("./arrayAccess-DpJYARwv.cjs");
-const require_surfaceBuilders = require("./surfaceBuilders-BKCiVf7T.cjs");
-const require_blueprintSketcher = require("./blueprintSketcher-CZyokLGJ.cjs");
-const require_helpers = require("./helpers-C4f2MV-r.cjs");
-const require_blueprint = require("./blueprint-ERmwk6zG.cjs");
+const require_surfaceBuilders = require("./surfaceBuilders-BvwSgD3C.cjs");
+const require_blueprintSketcher = require("./blueprintSketcher-Di376t-0.cjs");
+const require_helpers = require("./helpers-DKEVm6Hu.cjs");
+const require_blueprint = require("./blueprint-D83DDDPb.cjs");
 // src/2d/blueprints/cannedBlueprints.ts
 /**
 * Create a regular polygon blueprint inscribed in a circle of the given radius.

package/dist/{boolean2D-yUpS8onH.js → boolean2D-DqpCF72W.js}

@@ -1,10 +1,10 @@
 import { i as wasmIndex, n as bug } from "./bug-ClMTAJhe.js";
 import { P as unwrap, s as safeIndex } from "./errors-BTccWbtE.js";
 import { r as lastOrThrow } from "./arrayAccess-BpgouNir.js";
-import { v as zip } from "./surfaceBuilders-CrO_BBKM.js";
-import { a as Blueprints, i as CompoundBlueprint, l as intersectCurves, r as organiseBlueprints, t as BlueprintSketcher, u as Flatbush } from "./blueprintSketcher-CwTAtrkY.js";
-import { f as crossProduct2d, o as PRECISION_INTERSECTION, v as samePoint$1, x as subtract2d } from "./helpers-CNgipe6l.js";
-import { S as removeDuplicatePoints, p as make2dSegmentCurve, t as Blueprint } from "./blueprint-Zmt5-07y.js";
+import { v as zip } from "./surfaceBuilders-CPLe0bbk.js";
+import { a as Blueprints, i as CompoundBlueprint, l as intersectCurves, r as organiseBlueprints, t as BlueprintSketcher, u as Flatbush } from "./blueprintSketcher-D_Faf0GO.js";
+import { f as crossProduct2d, o as PRECISION_INTERSECTION, v as samePoint$1, x as subtract2d } from "./helpers-D2hANLRu.js";
+import { S as removeDuplicatePoints, p as make2dSegmentCurve, t as Blueprint } from "./blueprint-BhIk9Pvm.js";
 // src/2d/blueprints/cannedBlueprints.ts
 /**
 * Create a regular polygon blueprint inscribed in a circle of the given radius.

package/dist/brepjs.cjs

@@ -1,42 +1,42 @@
 Object.defineProperty(exports, Symbol.toStringTag, { value: "Module" });
 const require_rolldown_runtime = require("./rolldown-runtime-BW-eSwOZ.cjs");
-const require_shapeTypes = require("./shapeTypes-D938X2mg.cjs");
-const require_occtWasmAdapter = require("./occtWasmAdapter-DeoeK2iJ.cjs");
+const require_shapeTypes = require("./shapeTypes-Dc7j-MYg.cjs");
+const require_occtWasmAdapter = require("./occtWasmAdapter-DVxLkjlJ.cjs");
 const require_bug = require("./bug-CBcpIPuf.cjs");
 const require_errors = require("./errors-O_blYTWT.cjs");
-const require_topologyQueryFns = require("./topologyQueryFns-4WYqtSFF.cjs");
-const require_validityTypes = require("./validityTypes-tWSx_zAH.cjs");
+const require_topologyQueryFns = require("./topologyQueryFns-5Frx8Y-0.cjs");
+const require_validityTypes = require("./validityTypes-C6rROGTP.cjs");
 const require_constants = require("./constants-oee0S_x6.cjs");
 const require_types = require("./types-CjF9Rofr.cjs");
 const require_vecOps = require("./vecOps-CrGEPPQM.cjs");
 const require_planeOps = require("./planeOps-DZfLToKZ.cjs");
-const require_faceFns = require("./faceFns-Cx7cwUMx.cjs");
-const require_originTrackingFns = require("./originTrackingFns-C-yuMV3m.cjs");
-const require_solidBuilders = require("./solidBuilders-CAkBQKWb.cjs");
-const require_primitiveFns = require("./primitiveFns-BVAkYHVf.cjs");
-const require_shapeFns = require("./shapeFns-CwjjUOr0.cjs");
-const require_curveFns = require("./curveFns-BKT4Sg8q.cjs");
-const require_meshFns = require("./meshFns-GXF5gPZL.cjs");
+const require_faceFns = require("./faceFns-B7MiDYj1.cjs");
+const require_originTrackingFns = require("./originTrackingFns-CHymOLLm.cjs");
+const require_solidBuilders = require("./solidBuilders-iS5DDwg8.cjs");
+const require_primitiveFns = require("./primitiveFns-BVeBEaa4.cjs");
+const require_shapeFns = require("./shapeFns-C0w8vvfb.cjs");
+const require_curveFns = require("./curveFns-CyIvQNYT.cjs");
+const require_meshFns = require("./meshFns-Czlt-GBJ.cjs");
 const require_arrayAccess = require("./arrayAccess-DpJYARwv.cjs");
-const require_surfaceBuilders = require("./surfaceBuilders-BKCiVf7T.cjs");
-const require_healingFns = require("./healingFns-CcgyrL6h.cjs");
-const require_threadFns = require("./threadFns-CVIEbOW3.cjs");
-const require_blueprintSketcher = require("./blueprintSketcher-CZyokLGJ.cjs");
-const require_helpers = require("./helpers-C4f2MV-r.cjs");
-const require_blueprint = require("./blueprint-ERmwk6zG.cjs");
-const require_drawFns = require("./drawFns-D8e5RiRe.cjs");
-const require_measureFns = require("./measureFns-CuabRDRL.cjs");
-const require_cornerFinder = require("./cornerFinder-DfYBHHZG.cjs");
-const require_boolean2D = require("./boolean2D-CRuNKgXs.cjs");
-const require_blueprintFns = require("./blueprintFns-B_sxtIo7.cjs");
-const require_importFns = require("./importFns-fIdcaMqt.cjs");
-const require_textBlueprints = require("./textBlueprints-C9HeYc5a.cjs");
-const require_loftFns = require("./loftFns-AHaYxJyS.cjs");
-const require_refResolveFns = require("./refResolveFns-CaAw-ya3.cjs");
-const require_adjacencyFns = require("./adjacencyFns-Cho9v3Q3.cjs");
-const require_cameraFns = require("./cameraFns-DB1IyMmS.cjs");
-const require_textMetrics = require("./textMetrics-1fhCSAGF.cjs");
-const require_principalBoxFns = require("./principalBoxFns-DHh5_HCw.cjs");
+const require_surfaceBuilders = require("./surfaceBuilders-BvwSgD3C.cjs");
+const require_healingFns = require("./healingFns-DWljGTNR.cjs");
+const require_threadFns = require("./threadFns-CzXEnnmo.cjs");
+const require_blueprintSketcher = require("./blueprintSketcher-Di376t-0.cjs");
+const require_helpers = require("./helpers-DKEVm6Hu.cjs");
+const require_blueprint = require("./blueprint-D83DDDPb.cjs");
+const require_drawFns = require("./drawFns-71cOhWD-.cjs");
+const require_measureFns = require("./measureFns-CZHNWkiA.cjs");
+const require_cornerFinder = require("./cornerFinder-CdOe1Wrb.cjs");
+const require_boolean2D = require("./boolean2D-CNZFI_y8.cjs");
+const require_blueprintFns = require("./blueprintFns-C4TQn-x_.cjs");
+const require_importFns = require("./importFns-KEPAgbjj.cjs");
+const require_textBlueprints = require("./textBlueprints-CNPCPJix.cjs");
+const require_loftFns = require("./loftFns-D5AvfCGG.cjs");
+const require_refResolveFns = require("./refResolveFns-BAs4p9z7.cjs");
+const require_adjacencyFns = require("./adjacencyFns-BFJfaUwX.cjs");
+const require_cameraFns = require("./cameraFns-RqraCXIc.cjs");
+const require_textMetrics = require("./textMetrics-C71g4TmO.cjs");
+const require_principalBoxFns = require("./principalBoxFns-CG6kG7vT.cjs");
 const require_workerPool = require("./workerPool-D5tiNXrI.cjs");
 // src/kernel/types.ts
 /** Check if the kernel supports hidden-line-removal projection. */

package/dist/brepjs.js

@@ -1,40 +1,40 @@
-import { $ as initFromOC, A as as3D, C as isSolid, D as getShapeKind, E as GeometryCleanupError, F as createKernelHandle, G as _usingCtx, H as withScope, I as getDisposalStats, J as getKernel2D, K as getActiveKernelId, L as isLive, M as is3D, N as DisposalScope, P as createHandle, Q as initFromManifold, S as isShell, T as isWire, U as withScopeResult, V as withArenaCheckpoint, W as withScopeResultAsync, X as getKernelTier, Y as getKernelCapabilities, Z as init, _ as isCompound, a as castShape3D, at as withTier, b as isShape1D, c as createEdge, ct as resetPerformanceStats, d as createSolid, et as prewarm, f as createVertex, h as disposeResultShape, i as castShape, it as withQuality, j as is2D, k as as2D, l as createFace, lt as currentQuality, n as castResultShape, nt as registerKernelTier, ot as BrepkitAdapter, p as createWire, q as getKernel, rt as withKernel, s as createCompound, st as getPerformanceStats, tt as registerKernel, u as createShell, ut as qualityDeflection, v as isEdge, w as isVertex, x as isShape3D, y as isFace, z as resetDisposalStats } from "./shapeTypes-PNVEv6ga.js";
-import { A as DEFAULT_CAPABILITIES, j as EXACT_BREP_CAPABILITIES, t as OcctWasmAdapter } from "./occtWasmAdapter-DlNmVNUn.js";
+import { $ as initFromOC, A as as3D, C as isSolid, D as getShapeKind, E as GeometryCleanupError, F as createKernelHandle, G as _usingCtx, H as withScope, I as getDisposalStats, J as getKernel2D, K as getActiveKernelId, L as isLive, M as is3D, N as DisposalScope, P as createHandle, Q as initFromManifold, S as isShell, T as isWire, U as withScopeResult, V as withArenaCheckpoint, W as withScopeResultAsync, X as getKernelTier, Y as getKernelCapabilities, Z as init, _ as isCompound, a as castShape3D, at as withTier, b as isShape1D, c as createEdge, ct as resetPerformanceStats, d as createSolid, et as prewarm, f as createVertex, h as disposeResultShape, i as castShape, it as withQuality, j as is2D, k as as2D, l as createFace, lt as currentQuality, n as castResultShape, nt as registerKernelTier, ot as BrepkitAdapter, p as createWire, q as getKernel, rt as withKernel, s as createCompound, st as getPerformanceStats, tt as registerKernel, u as createShell, ut as qualityDeflection, v as isEdge, w as isVertex, x as isShape3D, y as isFace, z as resetDisposalStats } from "./shapeTypes-DwvQUp9M.js";
+import { M as DEFAULT_CAPABILITIES, N as EXACT_BREP_CAPABILITIES, t as OcctWasmAdapter } from "./occtWasmAdapter-B9d0Q0Vl.js";
 import { i as wasmIndex, n as bug, t as BrepBugError } from "./bug-ClMTAJhe.js";
 import { A as tap, C as mapBoth, D as or, E as ok, F as unwrapErr, I as unwrapOr, L as unwrapOrElse, M as tryCatch, N as tryCatchAsync, O as orElse, P as unwrap, R as zip, S as map, T as match, _ as flatMap, a as moduleInitError, b as isErr, c as sketcherStateError, d as validationError, f as OK, g as err, h as collect, i as kernelError, j as tapErr, k as pipeline, l as typeCastError, m as andThen, n as computationError, o as queryError, p as all, r as ioError, t as BrepErrorCode, u as unsupportedError, v as flatten, w as mapErr, x as isOk, y as fromNullable } from "./errors-BTccWbtE.js";
-import { D as kernelCallScoped, E as kernelCallRaw, T as kernelCall, _ as iterFaces, a as getCachedSurfaceType, b as iterVertices, c as getFaces, d as getSolids, f as getVertices, g as iterEdges, h as iterCompSolids, m as invalidateShapeCache, n as getBounds, o as getCompSolids, p as getWires, s as getEdges, t as describe$1, u as getShells, v as iterShells, w as vertexPosition, x as iterWires, y as iterSolids } from "./topologyQueryFns-BZUY10TD.js";
-import { a as isPlanarFace, c as manifoldShell, d as planarWire, f as validSolid, i as isOrientedFace, l as orientedFace, n as isClosedWire, o as isPlanarWire, r as isManifoldShell, s as isValidSolid, t as closedWire, u as planarFace } from "./validityTypes-DAXIqwZM.js";
+import { D as kernelCallScoped, E as kernelCallRaw, T as kernelCall, _ as iterFaces, a as getCachedSurfaceType, b as iterVertices, c as getFaces, d as getSolids, f as getVertices, g as iterEdges, h as iterCompSolids, m as invalidateShapeCache, n as getBounds, o as getCompSolids, p as getWires, s as getEdges, t as describe$1, u as getShells, v as iterShells, w as vertexPosition, x as iterWires, y as iterSolids } from "./topologyQueryFns-LXV1nTaS.js";
+import { a as isPlanarFace, c as manifoldShell, d as planarWire, f as validSolid, i as isOrientedFace, l as orientedFace, n as isClosedWire, o as isPlanarWire, r as isManifoldShell, s as isValidSolid, t as closedWire, u as planarFace } from "./validityTypes-DM-Iwe8N.js";
 import { n as HASH_CODE_MAX, r as RAD2DEG, t as DEG2RAD } from "./constants-iraOnb2p.js";
 import { n as toVec2, r as toVec3, t as resolveDirection } from "./types-CKXsIm9-.js";
 import { a as vecDot, c as vecLength, d as vecNormalize, f as vecProjectToPlane, g as vecSub, h as vecScale, i as vecDistance, l as vecLengthSq, m as vecRotate, n as vecAngle, o as vecEquals, p as vecRepr, r as vecCross, s as vecIsZero, t as vecAdd, u as vecNegate } from "./vecOps-S-m9H_fe.js";
 import { i as pivotPlane, n as createPlane, o as resolvePlane, r as makePlane, s as translatePlane, t as createNamedPlane } from "./planeOps-D3yDuMux.js";
-import { C as shapeType, S as iterTopo, _ as cast, a as faceOrientation, b as fromBREP, c as innerWires, d as pointOnSurface, f as projectPointOnFace, g as asTopo, h as uvCoordinates, i as faceGeomType, l as normalAt, m as uvBounds, n as faceAxis, o as flipFaceOrientation, p as removeHolesFromFace, r as faceCenter, s as getSurfaceType, t as classifyPointOnFace, u as outerWire, x as isCompSolid, y as downcast } from "./faceFns-lE2OvBfq.js";
-import { i as setShapeOrigin, t as getFaceOrigins } from "./originTrackingFns-BxeUD2NM.js";
-import { A as parseColor, D as colorShape, E as colorFaces, F as tagFaces, M as getFaceTags, N as getTagMetadata, O as getFaceColor, P as setTagMetadata, S as hasAnyMetadata, T as propagateMetadataThroughRelocation, _ as section$1, b as split$1, d as booleanPipeline, f as cut$2, g as intersect$2, h as fuseAll$2, j as findFacesByTag, k as getShapeColor, m as fuse$2, p as cutAll$2, r as makeCylinder, t as makeCompound, v as sectionToFace$1, y as slice$1 } from "./solidBuilders-Hft8Cr6a.js";
-import { A as locate$1, C as threePointArc, D as wireLoop, E as wire, F as transformCopy$1, I as translate$2, M as resize, N as rotate$2, O as applyMatrix$1, P as scale$3, S as tangentArc, T as vertex, _ as polygon, a as circle, b as sphere$1, c as cylinder, d as ellipsoid, f as face, g as offsetFace, h as line, i as bsplineApprox, j as mirror$2, k as composeTransforms, l as ellipse, m as helix, n as bezier, o as compound, p as filledFace, r as box, s as cone, t as addHoles, u as ellipseArc, v as sewShells, w as torus$1, x as subFace, y as solid } from "./primitiveFns-CualoFAk.js";
-import { a as isSameShape, i as isEqualShape, n as getHashCode, o as simplify$1, r as isEmpty$2, s as toBREP$1, t as clone$1 } from "./shapeFns-CdrDroOM.js";
-import { a as curveIsPeriodic, c as curvePointAt, d as flipOrientation, f as getCurveType, h as offsetWire2D, i as curveIsClosed, l as curveStartPoint, m as interpolateCurve, n as curveAxis, o as curveLength, p as getOrientation, r as curveEndPoint, s as curvePeriod, t as approximateCurve, u as curveTangentAt } from "./curveFns-BGPSFUWB.js";
-import { a as meshEdges$1, c as meshMultiLOD, d as clearMeshCache, f as createMeshCache, i as mesh$1, l as scaleDefaultTolerance, n as exportSTEP, o as meshLODs, r as exportSTL, s as meshLODsProgressive, t as exportIGES, u as buildMeshCacheKey } from "./meshFns-jarDZKw1.js";
+import { C as shapeType, S as iterTopo, _ as cast, a as faceOrientation, b as fromBREP, c as innerWires, d as pointOnSurface, f as projectPointOnFace, g as asTopo, h as uvCoordinates, i as faceGeomType, l as normalAt, m as uvBounds, n as faceAxis, o as flipFaceOrientation, p as removeHolesFromFace, r as faceCenter, s as getSurfaceType, t as classifyPointOnFace, u as outerWire, x as isCompSolid, y as downcast } from "./faceFns-iVPbTxki.js";
+import { i as setShapeOrigin, t as getFaceOrigins } from "./originTrackingFns-CBnyKLm7.js";
+import { A as parseColor, D as colorShape, E as colorFaces, F as tagFaces, M as getFaceTags, N as getTagMetadata, O as getFaceColor, P as setTagMetadata, S as hasAnyMetadata, T as propagateMetadataThroughRelocation, _ as section$1, b as split$1, d as booleanPipeline, f as cut$2, g as intersect$2, h as fuseAll$2, j as findFacesByTag, k as getShapeColor, m as fuse$2, p as cutAll$2, r as makeCylinder, t as makeCompound, v as sectionToFace$1, y as slice$1 } from "./solidBuilders-DT1gpVWM.js";
+import { A as locate$1, C as threePointArc, D as wireLoop, E as wire, F as transformCopy$1, I as translate$2, M as resize, N as rotate$2, O as applyMatrix$1, P as scale$3, S as tangentArc, T as vertex, _ as polygon, a as circle, b as sphere$1, c as cylinder, d as ellipsoid, f as face, g as offsetFace, h as line, i as bsplineApprox, j as mirror$2, k as composeTransforms, l as ellipse, m as helix, n as bezier, o as compound, p as filledFace, r as box, s as cone, t as addHoles, u as ellipseArc, v as sewShells, w as torus$1, x as subFace, y as solid } from "./primitiveFns-DeNl60Rw.js";
+import { a as isSameShape, i as isEqualShape, n as getHashCode, o as simplify$1, r as isEmpty$2, s as toBREP$1, t as clone$1 } from "./shapeFns-CgqKICF_.js";
+import { a as curveIsPeriodic, c as curvePointAt, d as flipOrientation, f as getCurveType, h as offsetWire2D, i as curveIsClosed, l as curveStartPoint, m as interpolateCurve, n as curveAxis, o as curveLength, p as getOrientation, r as curveEndPoint, s as curvePeriod, t as approximateCurve, u as curveTangentAt } from "./curveFns-BP3srCfK.js";
+import { a as meshEdges$1, c as meshMultiLOD, d as clearMeshCache, f as createMeshCache, i as mesh$1, l as scaleDefaultTolerance, n as exportSTEP, o as meshLODs, r as exportSTL, s as meshLODsProgressive, t as exportIGES, u as buildMeshCacheKey } from "./meshFns-DmjMzNbH.js";
 import { n as getAtOrThrow, r as lastOrThrow, t as firstOrThrow } from "./arrayAccess-BpgouNir.js";
-import { _ as makeThreePointArc, d as makeCircle, h as makeLine, l as makeBSplineInterpolation, n as fill, p as makeEllipseArc, r as makeFace, s as assembleWire, u as makeBezierCurve } from "./surfaceBuilders-CrO_BBKM.js";
-import { A as variableFillet, C as chamfer$2, D as removeFaces$1, E as offset$1, F as toLineGeometryData, M as toGroupedBufferGeometryData, N as toLODGeometryData, O as shell$2, P as toLODGeometryLevels, S as chamferDistAngle, T as fillet$2, _ as checkBoolean, a as healFace, b as getNurbsCurveData, c as isValid$1, d as chamferWithEvolution, f as cutWithEvolution, g as shellWithEvolution, h as intersectWithEvolution, i as heal$1, j as toBufferGeometryData, k as thicken$1, l as solidFromShell, m as fuseWithEvolution, n as fixSelfIntersection, o as healSolid, p as filletWithEvolution, r as fixShape, s as healWire, t as autoHeal, u as positionOnCurve, v as cutAllBisect, w as draft$1, x as getNurbsSurfaceData, y as fuseAllBisect } from "./healingFns-B94zSk1-.js";
-import { A as setJointValue, B as walkAssembly, C as cylindricalJoint, D as planarJoint, E as mechanismDOF, F as countNodes, G as quatFromAxisAngle, H as circularPattern, I as createAssemblyNode, J as quatRotate, K as quatFromTo, L as findNode, M as sphericalJoint, N as addChild, O as prismaticJoint, P as collectShapes, R as removeChild, S as addJoint, T as jointTransform, U as gridPattern, V as exportAssemblySTEP, W as linearPattern, Y as createAssembly, _ as exportURDF, a as deserializeHistory, b as inverseKinematics, c as modifyStep, d as replayFrom, f as replayHistory, g as undoLast, h as stepsFrom, i as createRegistry, j as setJointValues, k as revoluteJoint, l as registerOperation, m as stepCount, n as addStep, o as findStep, p as serializeHistory, q as quatMultiply, r as createHistory, s as getShape, t as thread, u as registerShape, v as importURDF, w as forwardKinematics, x as jointTrajectory, y as jointsFromDH, z as updateNode } from "./threadFns-f2KwibLR.js";
-import { n as BaseSketcher2d, r as organiseBlueprints, t as BlueprintSketcher } from "./blueprintSketcher-CwTAtrkY.js";
-import { a as createTypedFinder, i as wireFinder, n as edgeFinder, r as faceFinder, t as getSingleFace } from "./helpers-CNgipe6l.js";
-import { _ as approximateAsSvgCompatibleCurve, o as ellipseArcFlags } from "./blueprint-Zmt5-07y.js";
-import { A as sketchEllipse, D as makeBaseBox, E as deserializeDrawing, F as sketchRectangle, I as sketchRoundedRectangle, L as FaceSketcher, M as sketchHelix, N as sketchParametricFunction, O as polysideInnerRadius, P as sketchPolysides, R as Sketcher, S as drawText, _ as drawPolysides, a as drawingIntersect, b as drawSingleCircle, c as rotateDrawing, d as drawFaceOutline, f as drawProjection, g as drawPointsInterpolation, h as drawParametricFunction, i as drawingFuse, j as sketchFaceOffset, k as sketchCircle, l as scaleDrawing, m as drawEllipse, n as drawingCut, o as drawingToSketchOnPlane, p as drawCircle, r as drawingFillet, s as mirrorDrawing, t as drawingChamfer, u as translateDrawing, v as drawRectangle, w as draw, x as drawSingleEllipse, y as drawRoundedRectangle } from "./drawFns-aGufr-pr.js";
-import { a as measureDistance, c as measureLinearProps, d as measureVolumeProps, i as measureCurvatureAtMid, l as measureSurfaceProps, n as measureArea, o as measureDistanceProps, r as measureCurvatureAt, s as measureLength, t as createDistanceQuery, u as measureVolume } from "./measureFns-C94G0fH8.js";
-import { t as cornerFinder } from "./cornerFinder-D5qnDbtZ.js";
-import { a as fuseBlueprints, c as roundedRectangleBlueprint, i as cutBlueprints, n as fuse2D, o as intersectBlueprints, r as intersect2D, s as polysidesBlueprint, t as cut2D } from "./boolean2D-yUpS8onH.js";
-import { S as reverseCurve, _ as curve2dIsOnCurve, a as isInside2D, b as curve2dSplitAt, c as scale2D, d as stretch2D, f as toSVGPathD, g as curve2dFirstPoint, h as curve2dDistanceFrom, i as getOrientation2D, l as sketchOnFace2D, m as curve2dBoundingBox, n as createCompoundBlueprint, o as mirror2D, p as translate2D, r as getBounds2D, s as rotate2D, t as createBlueprint, u as sketchOnPlane2D, v as curve2dLastPoint, x as curve2dTangentAt, y as curve2dParameter } from "./blueprintFns-Dtm-XukP.js";
-import { a as importSVG, c as blueprintToDXF, d as exportGltf, f as exportOBJ, i as exportSTEPConfigured, l as exportDXF, n as importSTEP, o as importSVGPathD, r as importSTL, s as exportThreeMF, t as importIGES, u as exportGlb } from "./importFns-gB1X3ti2.js";
-import { S as revolve$2, a as Sketches, b as extrude$2, c as compoundSketchFace, d as sketchExtrude, f as sketchFace, g as sketchWires, h as sketchSweep, i as setFallbackFont, l as compoundSketchLoft, m as sketchRevolve, n as getFont, o as Sketch, p as sketchLoft, r as loadFont, s as compoundSketchExtrude, t as textBlueprints, u as compoundSketchRevolve, x as extrudeAll, y as CompoundSketch } from "./textBlueprints-B8q2a-nN.js";
-import { a as multiSectionSweep, c as twistExtrude, i as guidedSweep, n as loftAll, o as supportExtrude, r as complexExtrude, s as sweep$1, t as loft$2 } from "./loftFns-mbyBvJ8Y.js";
-import { _ as createRef, a as isVertexRef, b as defaultScorer, c as resolveRefParams, d as createVertexRef, f as resolveVertexRef, g as captureHint, h as assignRoles, i as isLineageRef, l as createDerivedFaceRef, m as resolveEdgeRef, n as isEdgeRef, o as resolveLineageRef, p as createEdgeRef, r as isFaceRef, s as resolveRefIn, t as isDerivedFaceRef, u as resolveDerivedFaceRef, v as resolveRef, y as updateRoles } from "./refResolveFns--SRyN2qa.js";
-import { a as facesOfVertex, c as verticesOfFace, i as facesOfEdge, l as wiresOfFace, n as adjacentFaces, o as sharedEdges, r as edgesOfFace, s as verticesOfEdge } from "./adjacencyFns-B2Po1gPs.js";
-import { a as makeProjectedEdges, i as projectEdges, n as cameraLookAt, r as createCamera, s as isProjectionPlane, t as cameraFromPlane } from "./cameraFns-DRok4UxZ.js";
-import { n as textMetrics, r as sketchText, t as fontMetrics } from "./textMetrics-DJfTSy6w.js";
-import { t as principalBoundingBox } from "./principalBoxFns-DtI7tVuS.js";
+import { _ as makeThreePointArc, d as makeCircle, h as makeLine, l as makeBSplineInterpolation, n as fill, p as makeEllipseArc, r as makeFace, s as assembleWire, u as makeBezierCurve } from "./surfaceBuilders-CPLe0bbk.js";
+import { A as variableFillet, C as chamfer$2, D as removeFaces$1, E as offset$1, F as toLineGeometryData, M as toGroupedBufferGeometryData, N as toLODGeometryData, O as shell$2, P as toLODGeometryLevels, S as chamferDistAngle, T as fillet$2, _ as checkBoolean, a as healFace, b as getNurbsCurveData, c as isValid$1, d as chamferWithEvolution, f as cutWithEvolution, g as shellWithEvolution, h as intersectWithEvolution, i as heal$1, j as toBufferGeometryData, k as thicken$1, l as solidFromShell, m as fuseWithEvolution, n as fixSelfIntersection, o as healSolid, p as filletWithEvolution, r as fixShape, s as healWire, t as autoHeal, u as positionOnCurve, v as cutAllBisect, w as draft$1, x as getNurbsSurfaceData, y as fuseAllBisect } from "./healingFns-BhP8zfp1.js";
+import { A as setJointValue, B as walkAssembly, C as cylindricalJoint, D as planarJoint, E as mechanismDOF, F as countNodes, G as quatFromAxisAngle, H as circularPattern, I as createAssemblyNode, J as quatRotate, K as quatFromTo, L as findNode, M as sphericalJoint, N as addChild, O as prismaticJoint, P as collectShapes, R as removeChild, S as addJoint, T as jointTransform, U as gridPattern, V as exportAssemblySTEP, W as linearPattern, Y as createAssembly, _ as exportURDF, a as deserializeHistory, b as inverseKinematics, c as modifyStep, d as replayFrom, f as replayHistory, g as undoLast, h as stepsFrom, i as createRegistry, j as setJointValues, k as revoluteJoint, l as registerOperation, m as stepCount, n as addStep, o as findStep, p as serializeHistory, q as quatMultiply, r as createHistory, s as getShape, t as thread, u as registerShape, v as importURDF, w as forwardKinematics, x as jointTrajectory, y as jointsFromDH, z as updateNode } from "./threadFns-DESH7lcs.js";
+import { n as BaseSketcher2d, r as organiseBlueprints, t as BlueprintSketcher } from "./blueprintSketcher-D_Faf0GO.js";
+import { a as createTypedFinder, i as wireFinder, n as edgeFinder, r as faceFinder, t as getSingleFace } from "./helpers-D2hANLRu.js";
+import { _ as approximateAsSvgCompatibleCurve, o as ellipseArcFlags } from "./blueprint-BhIk9Pvm.js";
+import { A as sketchEllipse, D as makeBaseBox, E as deserializeDrawing, F as sketchRectangle, I as sketchRoundedRectangle, L as FaceSketcher, M as sketchHelix, N as sketchParametricFunction, O as polysideInnerRadius, P as sketchPolysides, R as Sketcher, S as drawText, _ as drawPolysides, a as drawingIntersect, b as drawSingleCircle, c as rotateDrawing, d as drawFaceOutline, f as drawProjection, g as drawPointsInterpolation, h as drawParametricFunction, i as drawingFuse, j as sketchFaceOffset, k as sketchCircle, l as scaleDrawing, m as drawEllipse, n as drawingCut, o as drawingToSketchOnPlane, p as drawCircle, r as drawingFillet, s as mirrorDrawing, t as drawingChamfer, u as translateDrawing, v as drawRectangle, w as draw, x as drawSingleEllipse, y as drawRoundedRectangle } from "./drawFns-DxDwJ5zZ.js";
+import { a as measureDistance, c as measureLinearProps, d as measureVolumeProps, i as measureCurvatureAtMid, l as measureSurfaceProps, n as measureArea, o as measureDistanceProps, r as measureCurvatureAt, s as measureLength, t as createDistanceQuery, u as measureVolume } from "./measureFns-mxBdPiWa.js";
+import { t as cornerFinder } from "./cornerFinder-BZuQkRp2.js";
+import { a as fuseBlueprints, c as roundedRectangleBlueprint, i as cutBlueprints, n as fuse2D, o as intersectBlueprints, r as intersect2D, s as polysidesBlueprint, t as cut2D } from "./boolean2D-DqpCF72W.js";
+import { S as reverseCurve, _ as curve2dIsOnCurve, a as isInside2D, b as curve2dSplitAt, c as scale2D, d as stretch2D, f as toSVGPathD, g as curve2dFirstPoint, h as curve2dDistanceFrom, i as getOrientation2D, l as sketchOnFace2D, m as curve2dBoundingBox, n as createCompoundBlueprint, o as mirror2D, p as translate2D, r as getBounds2D, s as rotate2D, t as createBlueprint, u as sketchOnPlane2D, v as curve2dLastPoint, x as curve2dTangentAt, y as curve2dParameter } from "./blueprintFns-eULVgkq9.js";
+import { a as importSVG, c as blueprintToDXF, d as exportGltf, f as exportOBJ, i as exportSTEPConfigured, l as exportDXF, n as importSTEP, o as importSVGPathD, r as importSTL, s as exportThreeMF, t as importIGES, u as exportGlb } from "./importFns-DUzIkns7.js";
+import { S as revolve$2, a as Sketches, b as extrude$2, c as compoundSketchFace, d as sketchExtrude, f as sketchFace, g as sketchWires, h as sketchSweep, i as setFallbackFont, l as compoundSketchLoft, m as sketchRevolve, n as getFont, o as Sketch, p as sketchLoft, r as loadFont, s as compoundSketchExtrude, t as textBlueprints, u as compoundSketchRevolve, x as extrudeAll, y as CompoundSketch } from "./textBlueprints-BU0Rhk54.js";
+import { a as multiSectionSweep, c as twistExtrude, i as guidedSweep, n as loftAll, o as supportExtrude, r as complexExtrude, s as sweep$1, t as loft$2 } from "./loftFns-D5NJpHLZ.js";
+import { _ as createRef, a as isVertexRef, b as defaultScorer, c as resolveRefParams, d as createVertexRef, f as resolveVertexRef, g as captureHint, h as assignRoles, i as isLineageRef, l as createDerivedFaceRef, m as resolveEdgeRef, n as isEdgeRef, o as resolveLineageRef, p as createEdgeRef, r as isFaceRef, s as resolveRefIn, t as isDerivedFaceRef, u as resolveDerivedFaceRef, v as resolveRef, y as updateRoles } from "./refResolveFns-DHx1Y3GG.js";
+import { a as facesOfVertex, c as verticesOfFace, i as facesOfEdge, l as wiresOfFace, n as adjacentFaces, o as sharedEdges, r as edgesOfFace, s as verticesOfEdge } from "./adjacencyFns--KmBIKYJ.js";
+import { a as makeProjectedEdges, i as projectEdges, n as cameraLookAt, r as createCamera, s as isProjectionPlane, t as cameraFromPlane } from "./cameraFns-CrClIkmV.js";
+import { n as textMetrics, r as sketchText, t as fontMetrics } from "./textMetrics-Df9aLYK2.js";
+import { t as principalBoundingBox } from "./principalBoxFns-3mW_hA6z.js";
 import { _ as isSuccessResponse, a as createWorkerClient, c as enqueueTask, d as rejectAll, f as isBatchRequest, g as isOperationRequest, h as isInitRequest, i as registerHandler, l as isEmpty$1, m as isErrorResponse, n as createOperationRegistry, o as createTaskQueue, p as isDisposeRequest, r as createWorkerHandler, s as dequeueTask, t as createWorkerPool, u as pendingCount } from "./workerPool-Bc5hmJc4.js";
 // \0rolldown/runtime.js
 var __defProp = Object.defineProperty;

package/dist/{cameraFns-DRok4UxZ.js → cameraFns-CrClIkmV.js}

@@ -1,8 +1,8 @@
-import { G as _usingCtx, n as castResultShape, q as getKernel } from "./shapeTypes-PNVEv6ga.js";
+import { G as _usingCtx, n as castResultShape, q as getKernel } from "./shapeTypes-DwvQUp9M.js";
 import { E as ok, P as unwrap, d as validationError, g as err } from "./errors-BTccWbtE.js";
-import { s as getEdges } from "./topologyQueryFns-BZUY10TD.js";
+import { s as getEdges } from "./topologyQueryFns-LXV1nTaS.js";
 import { c as vecLength, d as vecNormalize, g as vecSub, r as vecCross } from "./vecOps-S-m9H_fe.js";
-import { t as clone } from "./shapeFns-CdrDroOM.js";
+import { t as clone } from "./shapeFns-CgqKICF_.js";
 // src/projection/projectionPlanes.ts
 /** Lookup table mapping each {@link ProjectionPlane} to its camera configuration. */
 var PROJECTION_PLANES = {

package/dist/{cameraFns-DB1IyMmS.cjs → cameraFns-RqraCXIc.cjs}

@@ -1,8 +1,8 @@
-const require_shapeTypes = require("./shapeTypes-D938X2mg.cjs");
+const require_shapeTypes = require("./shapeTypes-Dc7j-MYg.cjs");
 const require_errors = require("./errors-O_blYTWT.cjs");
-const require_topologyQueryFns = require("./topologyQueryFns-4WYqtSFF.cjs");
+const require_topologyQueryFns = require("./topologyQueryFns-5Frx8Y-0.cjs");
 const require_vecOps = require("./vecOps-CrGEPPQM.cjs");
-const require_shapeFns = require("./shapeFns-CwjjUOr0.cjs");
+const require_shapeFns = require("./shapeFns-C0w8vvfb.cjs");
 // src/projection/projectionPlanes.ts
 /** Lookup table mapping each {@link ProjectionPlane} to its camera configuration. */
 var PROJECTION_PLANES = {