brepjs 20.12.4 → 20.12.5

package/dist/{textBlueprints-DHfYmLtP.cjs → textBlueprints-C9HeYc5a.cjs}

@@ -1,19 +1,19 @@
 const require_rolldown_runtime = require("./rolldown-runtime-BW-eSwOZ.cjs");
-const require_shapeTypes = require("./shapeTypes-DJT3SnGK.cjs");
+const require_shapeTypes = require("./shapeTypes-D938X2mg.cjs");
 const require_bug = require("./bug-CBcpIPuf.cjs");
 const require_errors = require("./errors-O_blYTWT.cjs");
 const require_constants = require("./constants-oee0S_x6.cjs");
 const require_types = require("./types-CjF9Rofr.cjs");
 const require_vecOps = require("./vecOps-CrGEPPQM.cjs");
 const require_planeOps = require("./planeOps-DZfLToKZ.cjs");
-const require_faceFns = require("./faceFns-BjmlYcc9.cjs");
-const require_solidBuilders = require("./solidBuilders-BWbqhbyv.cjs");
+const require_faceFns = require("./faceFns-Cx7cwUMx.cjs");
+const require_solidBuilders = require("./solidBuilders-CAkBQKWb.cjs");
 const require_faceRoleFns = require("./faceRoleFns-Db5bYj4Q.cjs");
-const require_curveFns = require("./curveFns-8lUhNquZ.cjs");
+const require_curveFns = require("./curveFns-BKT4Sg8q.cjs");
 const require_arrayAccess = require("./arrayAccess-DpJYARwv.cjs");
-const require_surfaceBuilders = require("./surfaceBuilders-CwG_RPdZ.cjs");
-const require_blueprintSketcher = require("./blueprintSketcher-W9yON-UC.cjs");
-const require_loftFns = require("./loftFns-DlG5oR0X.cjs");
+const require_surfaceBuilders = require("./surfaceBuilders-BKCiVf7T.cjs");
+const require_blueprintSketcher = require("./blueprintSketcher-CZyokLGJ.cjs");
+const require_loftFns = require("./loftFns-AHaYxJyS.cjs");
 let opentype_js = require("opentype.js");
 opentype_js = require_rolldown_runtime.__toESM(opentype_js, 1);
 // src/topology/shapeRef/extrudeRoleFns.ts
@@ -486,9 +486,13 @@ function sketchSweep(sketch, sketchOnPlane, sweepConfig = {}) {
 		...sweepConfig
 	};
 	if (sketch.baseFace) config.support = sketch.baseFace.wrapped;
-	const shape = require_errors.unwrap(require_loftFns.sweep(profile.wire, sketch.wire, config));
-	sketch.delete();
-	return shape;
+	try {
+		const shape = require_errors.unwrap(require_loftFns.sweep(profile.wire, sketch.wire, config));
+		sketch.delete();
+		return shape;
+	} finally {
+		profile.delete();
+	}
 }
 /**
 * Loft between this sketch and one or more other sketches.
@@ -763,6 +767,10 @@ var Sketches = class {
 		if (!(only instanceof Sketch)) require_bug.bug(`Sketches.${op}`, `${op} is only supported on single-wire profiles.`);
 		return only;
 	}
+	/** Release the kernel resources of every contained sketch. */
+	delete() {
+		for (const s of this.sketches) s.delete();
+	}
 	/** Build a face from the sole contained profile (see {@link Sketches.faces}). */
 	face() {
 		if (this.sketches.length !== 1) require_bug.bug("Sketches.face", "Multiple profiles — use faces() to combine them.");
@@ -930,7 +938,7 @@ function textBlueprints(text, { startX = 0, startY = 0, fontSize = 16, fontFamil
 	let font = getFont(fontFamily);
 	if (!font) font = getFont();
 	if (!font) require_bug.bug("text", "No fonts loaded. Call loadFont() before using text functions.");
-	const writtenText = font.getPath(text, -startX, -startY, fontSize);
+	const writtenText = font.getPath(text, startX, -startY, fontSize);
 	const blueprints = Array.from(sketchFontCommands(writtenText.commands));
 	return require_blueprintSketcher.organiseBlueprints(blueprints).mirror([0, 0]);
 }

package/dist/{textMetrics-CwYDH9js.cjs → textMetrics-1fhCSAGF.cjs}

@@ -1,5 +1,5 @@
 const require_errors = require("./errors-O_blYTWT.cjs");
-const require_textBlueprints = require("./textBlueprints-DHfYmLtP.cjs");
+const require_textBlueprints = require("./textBlueprints-C9HeYc5a.cjs");
 // src/text/sketchText.ts
 /**
 * Render text as 3D sketch outlines on a plane.

package/dist/{textMetrics-Bbf-Dllw.js → textMetrics-DJfTSy6w.js}

@@ -1,5 +1,5 @@
 import { E as ok, d as validationError, g as err, t as BrepErrorCode } from "./errors-BTccWbtE.js";
-import { _ as wrapSketchData, a as Sketches, n as getFont, t as textBlueprints, y as CompoundSketch } from "./textBlueprints-Dhe8_Uvc.js";
+import { _ as wrapSketchData, a as Sketches, n as getFont, t as textBlueprints, y as CompoundSketch } from "./textBlueprints-B8q2a-nN.js";
 // src/text/sketchText.ts
 /**
 * Render text as 3D sketch outlines on a plane.

package/dist/{threadFns-B23RqugN.cjs → threadFns-CVIEbOW3.cjs}

@@ -1,12 +1,12 @@
-const require_shapeTypes = require("./shapeTypes-DJT3SnGK.cjs");
+const require_shapeTypes = require("./shapeTypes-D938X2mg.cjs");
 const require_errors = require("./errors-O_blYTWT.cjs");
 const require_vecOps = require("./vecOps-CrGEPPQM.cjs");
-const require_faceFns = require("./faceFns-BjmlYcc9.cjs");
-const require_solidBuilders = require("./solidBuilders-BWbqhbyv.cjs");
-const require_primitiveFns = require("./primitiveFns-BRXZ7jnP.cjs");
-const require_shapeFns = require("./shapeFns-BbXqiNqY.cjs");
-const require_loftFns = require("./loftFns-DlG5oR0X.cjs");
-const require_refResolveFns = require("./refResolveFns-BZdUlv9f.cjs");
+const require_faceFns = require("./faceFns-Cx7cwUMx.cjs");
+const require_solidBuilders = require("./solidBuilders-CAkBQKWb.cjs");
+const require_primitiveFns = require("./primitiveFns-BVAkYHVf.cjs");
+const require_shapeFns = require("./shapeFns-CwjjUOr0.cjs");
+const require_loftFns = require("./loftFns-AHaYxJyS.cjs");
+const require_refResolveFns = require("./refResolveFns-CaAw-ya3.cjs");
 // src/utils/uuid.ts
 /** Generate a v4-style UUID string using `crypto.getRandomValues`. */
 function uuidv() {
@@ -147,7 +147,7 @@ function quatMultiply(a, b) {
 */
 function linearPattern(shape, direction, count, spacing, options) {
 	if (count < 1) return require_errors.err(require_errors.validationError("PATTERN_INVALID_COUNT", "Pattern count must be at least 1"));
-	if (count === 1) return require_errors.ok(shape);
+	if (count === 1) return require_shapeFns.clone(shape);
 	if (require_vecOps.vecIsZero(direction)) return require_errors.err(require_errors.validationError("PATTERN_ZERO_DIRECTION", "Pattern direction cannot be zero"));
 	const dir = require_vecOps.vecNormalize(direction);
 	const copies = require_shapeTypes.getKernel().linearPattern(shape.wrapped, [...dir], spacing, count).map((s) => require_shapeTypes.castResultShape(s));
@@ -163,10 +163,15 @@ function linearPattern(shape, direction, count, spacing, options) {
 /**
 * Create a circular pattern of a shape around an axis.
 *
+* A full turn (`fullAngle` of ±360) spaces the copies `fullAngle / count`
+* apart, so the last copy does not land on the first. Any other angle is an
+* open arc: the first copy stays in place, the last lands at `fullAngle`, and
+* they are spaced `fullAngle / (count - 1)` apart.
+*
 * @param shape - The shape to replicate
 * @param axis - Rotation axis direction
 * @param count - Total number of copies (including the original)
-* @param fullAngle - Total angle to spread copies over in degrees (default: 360)
+* @param fullAngle - Angle in degrees the copies span (default: 360)
 * @param center - Center point of rotation (default: [0,0,0])
 * @param options - Boolean options for the fuse operation
 * @returns Fused shape of all copies
@@ -177,9 +182,9 @@ function circularPattern(shape, axis, count, fullAngle = 360, center = [
 	0
 ], options) {
 	if (count < 1) return require_errors.err(require_errors.validationError("PATTERN_INVALID_COUNT", "Pattern count must be at least 1"));
-	if (count === 1) return require_errors.ok(shape);
+	if (count === 1) return require_shapeFns.clone(shape);
 	if (require_vecOps.vecIsZero(axis)) return require_errors.err(require_errors.validationError("PATTERN_ZERO_AXIS", "Pattern axis cannot be zero"));
-	const angleStep = fullAngle / count;
+	const angleStep = fullAngle / (Math.abs(Math.abs(fullAngle) - 360) < 1e-9 ? count : count - 1);
 	const copies = require_shapeTypes.getKernel().circularPattern(shape.wrapped, [...center], [...axis], angleStep, count).map((s) => require_shapeTypes.castResultShape(s));
 	try {
 		return require_solidBuilders.fuseAll(copies, {
@@ -204,24 +209,27 @@ function circularPattern(shape, axis, count, fullAngle = 360, center = [
 * @returns Compound shape containing all copies, or fused result
 */
 function gridPattern(shape, directionX, directionY, countX, countY, spacingX, spacingY, options) {
-	if (countX < 1 || countY < 1) return require_errors.err(require_errors.validationError("PATTERN_INVALID_COUNT", "Grid pattern counts must be at least 1"));
-	if (countX === 1 && countY === 1) return require_errors.ok(shape);
-	if (require_vecOps.vecIsZero(directionX)) return require_errors.err(require_errors.validationError("PATTERN_ZERO_DIRECTION", "Grid directionX cannot be zero"));
-	if (require_vecOps.vecIsZero(directionY)) return require_errors.err(require_errors.validationError("PATTERN_ZERO_DIRECTION", "Grid directionY cannot be zero"));
-	const kernel = require_shapeTypes.getKernel();
-	const dirX = require_vecOps.vecNormalize(directionX);
-	const dirY = require_vecOps.vecNormalize(directionY);
-	if (typeof kernel.gridPattern === "function") {
-		const compound = kernel.gridPattern(shape.wrapped, [...dirX], [...dirY], spacingX, spacingY, countX, countY);
-		return require_errors.ok(require_shapeTypes.castResultShape(compound));
-	}
-	const rowResult = linearPattern(shape, directionX, countX, spacingX, options);
-	if (!rowResult.ok) return rowResult;
-	const row = rowResult.value;
-	const out = linearPattern(row, directionY, countY, spacingY, options);
-	const passthrough = out.ok && out.value === row;
-	if (row !== shape && !passthrough) row[Symbol.dispose]();
-	return out;
+	try {
+		var _usingCtx$2 = require_shapeTypes._usingCtx();
+		if (countX < 1 || countY < 1) return require_errors.err(require_errors.validationError("PATTERN_INVALID_COUNT", "Grid pattern counts must be at least 1"));
+		if (countX === 1 && countY === 1) return require_shapeFns.clone(shape);
+		if (require_vecOps.vecIsZero(directionX)) return require_errors.err(require_errors.validationError("PATTERN_ZERO_DIRECTION", "Grid directionX cannot be zero"));
+		if (require_vecOps.vecIsZero(directionY)) return require_errors.err(require_errors.validationError("PATTERN_ZERO_DIRECTION", "Grid directionY cannot be zero"));
+		const kernel = require_shapeTypes.getKernel();
+		const dirX = require_vecOps.vecNormalize(directionX);
+		const dirY = require_vecOps.vecNormalize(directionY);
+		if (typeof kernel.gridPattern === "function") {
+			const compound = kernel.gridPattern(shape.wrapped, [...dirX], [...dirY], spacingX, spacingY, countX, countY);
+			return require_errors.ok(require_shapeTypes.castResultShape(compound));
+		}
+		const rowResult = linearPattern(shape, directionX, countX, spacingX, options);
+		if (!rowResult.ok) return rowResult;
+		return linearPattern(_usingCtx$2.u(rowResult.value), directionY, countY, spacingY, options);
+	} catch (_) {
+		_usingCtx$2.e = _;
+	} finally {
+		_usingCtx$2.d();
+	}
 }
 // src/operations/exporterFns.ts
 /**

package/dist/{threadFns-Cn7_bmux.js → threadFns-f2KwibLR.js}

@@ -1,12 +1,12 @@
-import { F as createKernelHandle, G as _usingCtx, N as DisposalScope, n as castResultShape, q as getKernel, x as isShape3D } from "./shapeTypes-DAz6aAnJ.js";
+import { F as createKernelHandle, G as _usingCtx, N as DisposalScope, n as castResultShape, q as getKernel, x as isShape3D } from "./shapeTypes-PNVEv6ga.js";
 import { E as ok, d as validationError, g as err, n as computationError, r as ioError, t as BrepErrorCode, x as isOk } from "./errors-BTccWbtE.js";
 import { d as vecNormalize, s as vecIsZero } from "./vecOps-S-m9H_fe.js";
-import { b as fromBREP } from "./faceFns-7eHqNM0P.js";
-import { h as fuseAll } from "./solidBuilders-8xytLt8-.js";
-import { E as wire, h as line } from "./primitiveFns-ClQP6zMQ.js";
-import { s as toBREP } from "./shapeFns-BCgegapL.js";
-import { t as loft } from "./loftFns-H4ZOpRAk.js";
-import { c as resolveRefParams } from "./refResolveFns-BG3JGs--.js";
+import { b as fromBREP } from "./faceFns-lE2OvBfq.js";
+import { h as fuseAll } from "./solidBuilders-Hft8Cr6a.js";
+import { E as wire, h as line } from "./primitiveFns-CualoFAk.js";
+import { s as toBREP, t as clone } from "./shapeFns-CdrDroOM.js";
+import { t as loft } from "./loftFns-mbyBvJ8Y.js";
+import { c as resolveRefParams } from "./refResolveFns--SRyN2qa.js";
 // src/utils/uuid.ts
 /** Generate a v4-style UUID string using `crypto.getRandomValues`. */
 function uuidv() {
@@ -147,7 +147,7 @@ function quatMultiply(a, b) {
 */
 function linearPattern(shape, direction, count, spacing, options) {
 	if (count < 1) return err(validationError("PATTERN_INVALID_COUNT", "Pattern count must be at least 1"));
-	if (count === 1) return ok(shape);
+	if (count === 1) return clone(shape);
 	if (vecIsZero(direction)) return err(validationError("PATTERN_ZERO_DIRECTION", "Pattern direction cannot be zero"));
 	const dir = vecNormalize(direction);
 	const copies = getKernel().linearPattern(shape.wrapped, [...dir], spacing, count).map((s) => castResultShape(s));
@@ -163,10 +163,15 @@ function linearPattern(shape, direction, count, spacing, options) {
 /**
 * Create a circular pattern of a shape around an axis.
 *
+* A full turn (`fullAngle` of ±360) spaces the copies `fullAngle / count`
+* apart, so the last copy does not land on the first. Any other angle is an
+* open arc: the first copy stays in place, the last lands at `fullAngle`, and
+* they are spaced `fullAngle / (count - 1)` apart.
+*
 * @param shape - The shape to replicate
 * @param axis - Rotation axis direction
 * @param count - Total number of copies (including the original)
-* @param fullAngle - Total angle to spread copies over in degrees (default: 360)
+* @param fullAngle - Angle in degrees the copies span (default: 360)
 * @param center - Center point of rotation (default: [0,0,0])
 * @param options - Boolean options for the fuse operation
 * @returns Fused shape of all copies
@@ -177,9 +182,9 @@ function circularPattern(shape, axis, count, fullAngle = 360, center = [
 	0
 ], options) {
 	if (count < 1) return err(validationError("PATTERN_INVALID_COUNT", "Pattern count must be at least 1"));
-	if (count === 1) return ok(shape);
+	if (count === 1) return clone(shape);
 	if (vecIsZero(axis)) return err(validationError("PATTERN_ZERO_AXIS", "Pattern axis cannot be zero"));
-	const angleStep = fullAngle / count;
+	const angleStep = fullAngle / (Math.abs(Math.abs(fullAngle) - 360) < 1e-9 ? count : count - 1);
 	const copies = getKernel().circularPattern(shape.wrapped, [...center], [...axis], angleStep, count).map((s) => castResultShape(s));
 	try {
 		return fuseAll(copies, {
@@ -204,24 +209,27 @@ function circularPattern(shape, axis, count, fullAngle = 360, center = [
 * @returns Compound shape containing all copies, or fused result
 */
 function gridPattern(shape, directionX, directionY, countX, countY, spacingX, spacingY, options) {
-	if (countX < 1 || countY < 1) return err(validationError("PATTERN_INVALID_COUNT", "Grid pattern counts must be at least 1"));
-	if (countX === 1 && countY === 1) return ok(shape);
-	if (vecIsZero(directionX)) return err(validationError("PATTERN_ZERO_DIRECTION", "Grid directionX cannot be zero"));
-	if (vecIsZero(directionY)) return err(validationError("PATTERN_ZERO_DIRECTION", "Grid directionY cannot be zero"));
-	const kernel = getKernel();
-	const dirX = vecNormalize(directionX);
-	const dirY = vecNormalize(directionY);
-	if (typeof kernel.gridPattern === "function") {
-		const compound = kernel.gridPattern(shape.wrapped, [...dirX], [...dirY], spacingX, spacingY, countX, countY);
-		return ok(castResultShape(compound));
+	try {
+		var _usingCtx$2 = _usingCtx();
+		if (countX < 1 || countY < 1) return err(validationError("PATTERN_INVALID_COUNT", "Grid pattern counts must be at least 1"));
+		if (countX === 1 && countY === 1) return clone(shape);
+		if (vecIsZero(directionX)) return err(validationError("PATTERN_ZERO_DIRECTION", "Grid directionX cannot be zero"));
+		if (vecIsZero(directionY)) return err(validationError("PATTERN_ZERO_DIRECTION", "Grid directionY cannot be zero"));
+		const kernel = getKernel();
+		const dirX = vecNormalize(directionX);
+		const dirY = vecNormalize(directionY);
+		if (typeof kernel.gridPattern === "function") {
+			const compound = kernel.gridPattern(shape.wrapped, [...dirX], [...dirY], spacingX, spacingY, countX, countY);
+			return ok(castResultShape(compound));
+		}
+		const rowResult = linearPattern(shape, directionX, countX, spacingX, options);
+		if (!rowResult.ok) return rowResult;
+		return linearPattern(_usingCtx$2.u(rowResult.value), directionY, countY, spacingY, options);
+	} catch (_) {
+		_usingCtx$2.e = _;
+	} finally {
+		_usingCtx$2.d();
 	}
-	const rowResult = linearPattern(shape, directionX, countX, spacingX, options);
-	if (!rowResult.ok) return rowResult;
-	const row = rowResult.value;
-	const out = linearPattern(row, directionY, countY, spacingY, options);
-	const passthrough = out.ok && out.value === row;
-	if (row !== shape && !passthrough) row[Symbol.dispose]();
-	return out;
 }
 // src/operations/exporterFns.ts
 /**

package/dist/topology/apiTypes.d.ts

@@ -2,13 +2,14 @@ import { Vec2, Vec3 } from '../core/types.js';
 import { AnyShape, Dimension, Edge, Face, Wire, Shape3D } from '../core/shapeTypes.js';
 import { EdgeFinderFn, FaceFinderFn, ShapeFinder } from '../query/finderFns.js';
 /**
- * Structural type matching a Drawing's wire-producing interface.
- * Used in place of importing the actual Drawing class to avoid
- * Layer 2 → Layer 3 boundary violations.
+ * Structural type matching a Drawing: it sketches onto a plane as something
+ * that builds a face (holes included). Used in place of importing the actual
+ * Drawing class to avoid Layer 2 → Layer 3 boundary violations.
  */
 export interface DrawingLike {
-    sketchOnPlane(plane: string): {
-        wire: Wire;
+    sketchOnPlane(plane: 'XY'): {
+        face(): Face;
+        delete?(): void;
     };
 }
 type FinderFor<T extends AnyShape<Dimension>> = T extends Edge ? EdgeFinderFn : T extends Face ? FaceFinderFn : ShapeFinder<T>;
@@ -66,7 +67,12 @@ export interface DrillOptions {
 }
 /** Options for the pocket() compound operation. */
 export interface PocketOptions {
-    /** 2D profile shape to cut into the face. */
+    /**
+     * 2D profile to cut into the face, drawn in XY with its origin at the face
+     * centre. On faces parallel to XY it keeps the world X and Y axes; on any
+     * other face its Y axis runs up the face and its X axis points right as seen
+     * from outside.
+     */
     profile: DrawingLike | Wire;
     /** Which face to pocket. Default: top face. */
     face?: Face | FinderFn<Face>;
@@ -75,7 +81,7 @@ export interface PocketOptions {
 }
 /** Options for the boss() compound operation. */
 export interface BossOptions {
-    /** 2D profile shape to extrude onto the face. */
+    /** 2D profile to extrude from the face, placed as for {@link PocketOptions.profile}. */
     profile: DrawingLike | Wire;
     /** Which face to add onto. Default: top face. */
     face?: Face | FinderFn<Face>;

package/dist/topology.cjs

@@ -1,13 +1,13 @@
 Object.defineProperty(exports, Symbol.toStringTag, { value: "Module" });
-const require_topologyQueryFns = require("./topologyQueryFns-xh11vEQw.cjs");
-const require_faceFns = require("./faceFns-BjmlYcc9.cjs");
-const require_solidBuilders = require("./solidBuilders-BWbqhbyv.cjs");
-const require_primitiveFns = require("./primitiveFns-BRXZ7jnP.cjs");
-const require_shapeFns = require("./shapeFns-BbXqiNqY.cjs");
-const require_curveFns = require("./curveFns-8lUhNquZ.cjs");
-const require_meshFns = require("./meshFns-nEvfwNRF.cjs");
-const require_healingFns = require("./healingFns-CYLIcIWv.cjs");
-const require_adjacencyFns = require("./adjacencyFns-C_Vb1AeW.cjs");
+const require_topologyQueryFns = require("./topologyQueryFns-4WYqtSFF.cjs");
+const require_faceFns = require("./faceFns-Cx7cwUMx.cjs");
+const require_solidBuilders = require("./solidBuilders-CAkBQKWb.cjs");
+const require_primitiveFns = require("./primitiveFns-BVAkYHVf.cjs");
+const require_shapeFns = require("./shapeFns-CwjjUOr0.cjs");
+const require_curveFns = require("./curveFns-BKT4Sg8q.cjs");
+const require_meshFns = require("./meshFns-GXF5gPZL.cjs");
+const require_healingFns = require("./healingFns-CcgyrL6h.cjs");
+const require_adjacencyFns = require("./adjacencyFns-Cho9v3Q3.cjs");
 exports.addHoles = require_primitiveFns.addHoles;
 exports.adjacentFaces = require_adjacencyFns.adjacentFaces;
 exports.approximateCurve = require_curveFns.approximateCurve;

package/dist/topology.d.ts

@@ -17,7 +17,7 @@ export { chamferDistAngle as chamferDistAngleShape } from './topology/chamferAng
 export { variableFillet, type VariableFilletRadius } from './topology/modifierFns.js';
 export { getCurveType, curveStartPoint, curveEndPoint, curvePointAt, curveTangentAt, curveAxis, curveLength, curveIsClosed, curveIsPeriodic, curvePeriod, getOrientation, flipOrientation, offsetWire2D, interpolateCurve, approximateCurve, type InterpolateCurveOptions, type ApproximateCurveOptions, } from './topology/curveFns.js';
 export { getNurbsCurveData, getNurbsSurfaceData } from './topology/nurbsFns.js';
-export { getSurfaceType, faceGeomType, faceOrientation, flipFaceOrientation, uvBounds, pointOnSurface, uvCoordinates, normalAt, faceCenter, faceAxis, classifyPointOnFace, outerWire, innerWires, projectPointOnFace, type UVBounds, type PointProjectionResult, } from './topology/faceFns.js';
+export { getSurfaceType, faceGeomType, faceOrientation, flipFaceOrientation, uvBounds, pointOnSurface, uvCoordinates, normalAt, faceCenter, faceAxis, classifyPointOnFace, outerWire, innerWires, projectPointOnFace, type SurfaceType, type UVBounds, type PointProjectionResult, } from './topology/faceFns.js';
 export { facesOfEdge, edgesOfFace, wiresOfFace, verticesOfEdge, adjacentFaces, sharedEdges, } from './topology/adjacencyFns.js';
 export { exportSTEP, exportSTL, exportIGES, type ShapeMesh, type EdgeMesh, type MeshOptions, } from './topology/meshFns.js';
 export { clearMeshCache, createMeshCache, type MeshCacheContext } from './topology/meshCache.js';

package/dist/topology.js

@@ -1,10 +1,10 @@
-import { _ as iterFaces, b as iterVertices, c as getFaces, f as getVertices, g as iterEdges, m as invalidateShapeCache, n as getBounds, p as getWires, s as getEdges, w as vertexPosition, x as iterWires } from "./topologyQueryFns-BfYdGOJc.js";
-import { C as shapeType, S as iterTopo, _ as cast, a as faceOrientation, b as fromBREP, c as innerWires, d as pointOnSurface, f as projectPointOnFace, g as asTopo, h as uvCoordinates, i as faceGeomType, l as normalAt, m as uvBounds, n as faceAxis, o as flipFaceOrientation, r as faceCenter, s as getSurfaceType, t as classifyPointOnFace, u as outerWire, x as isCompSolid, y as downcast } from "./faceFns-7eHqNM0P.js";
-import { h as fuseAll, p as cutAll } from "./solidBuilders-8xytLt8-.js";
-import { C as threePointArc, D as wireLoop, E as wire, S as tangentArc, T as vertex, _ as polygon, a as circle, b as sphere, c as cylinder, d as ellipsoid, f as face, g as offsetFace, h as line, i as bsplineApprox, l as ellipse, m as helix, n as bezier, o as compound, p as filledFace, r as box, s as cone, t as addHoles, u as ellipseArc, v as sewShells, w as torus, x as subFace, y as solid } from "./primitiveFns-ClQP6zMQ.js";
-import { a as isSameShape, i as isEqualShape, n as getHashCode } from "./shapeFns-BCgegapL.js";
-import { a as curveIsPeriodic, c as curvePointAt, d as flipOrientation, f as getCurveType, h as offsetWire2D, i as curveIsClosed, l as curveStartPoint, m as interpolateCurve, n as curveAxis, o as curveLength, p as getOrientation, r as curveEndPoint, s as curvePeriod, t as approximateCurve, u as curveTangentAt } from "./curveFns-B4308HNM.js";
-import { d as clearMeshCache, f as createMeshCache, n as exportSTEP, r as exportSTL, t as exportIGES } from "./meshFns-DaRZxa7B.js";
-import { A as variableFillet, F as toLineGeometryData, M as toGroupedBufferGeometryData, S as chamferDistAngle, _ as checkBoolean, a as healFace, b as getNurbsCurveData, d as chamferWithEvolution, f as cutWithEvolution, g as shellWithEvolution, h as intersectWithEvolution, j as toBufferGeometryData, l as solidFromShell, m as fuseWithEvolution, n as fixSelfIntersection, o as healSolid, p as filletWithEvolution, r as fixShape, s as healWire, t as autoHeal, u as positionOnCurve, v as cutAllBisect, x as getNurbsSurfaceData, y as fuseAllBisect } from "./healingFns-BW7mZ_SW.js";
-import { i as facesOfEdge, l as wiresOfFace, n as adjacentFaces, o as sharedEdges, r as edgesOfFace, s as verticesOfEdge } from "./adjacencyFns-54UTqtan.js";
+import { _ as iterFaces, b as iterVertices, c as getFaces, f as getVertices, g as iterEdges, m as invalidateShapeCache, n as getBounds, p as getWires, s as getEdges, w as vertexPosition, x as iterWires } from "./topologyQueryFns-BZUY10TD.js";
+import { C as shapeType, S as iterTopo, _ as cast, a as faceOrientation, b as fromBREP, c as innerWires, d as pointOnSurface, f as projectPointOnFace, g as asTopo, h as uvCoordinates, i as faceGeomType, l as normalAt, m as uvBounds, n as faceAxis, o as flipFaceOrientation, r as faceCenter, s as getSurfaceType, t as classifyPointOnFace, u as outerWire, x as isCompSolid, y as downcast } from "./faceFns-lE2OvBfq.js";
+import { h as fuseAll, p as cutAll } from "./solidBuilders-Hft8Cr6a.js";
+import { C as threePointArc, D as wireLoop, E as wire, S as tangentArc, T as vertex, _ as polygon, a as circle, b as sphere, c as cylinder, d as ellipsoid, f as face, g as offsetFace, h as line, i as bsplineApprox, l as ellipse, m as helix, n as bezier, o as compound, p as filledFace, r as box, s as cone, t as addHoles, u as ellipseArc, v as sewShells, w as torus, x as subFace, y as solid } from "./primitiveFns-CualoFAk.js";
+import { a as isSameShape, i as isEqualShape, n as getHashCode } from "./shapeFns-CdrDroOM.js";
+import { a as curveIsPeriodic, c as curvePointAt, d as flipOrientation, f as getCurveType, h as offsetWire2D, i as curveIsClosed, l as curveStartPoint, m as interpolateCurve, n as curveAxis, o as curveLength, p as getOrientation, r as curveEndPoint, s as curvePeriod, t as approximateCurve, u as curveTangentAt } from "./curveFns-BGPSFUWB.js";
+import { d as clearMeshCache, f as createMeshCache, n as exportSTEP, r as exportSTL, t as exportIGES } from "./meshFns-jarDZKw1.js";
+import { A as variableFillet, F as toLineGeometryData, M as toGroupedBufferGeometryData, S as chamferDistAngle, _ as checkBoolean, a as healFace, b as getNurbsCurveData, d as chamferWithEvolution, f as cutWithEvolution, g as shellWithEvolution, h as intersectWithEvolution, j as toBufferGeometryData, l as solidFromShell, m as fuseWithEvolution, n as fixSelfIntersection, o as healSolid, p as filletWithEvolution, r as fixShape, s as healWire, t as autoHeal, u as positionOnCurve, v as cutAllBisect, x as getNurbsSurfaceData, y as fuseAllBisect } from "./healingFns-B94zSk1-.js";
+import { i as facesOfEdge, l as wiresOfFace, n as adjacentFaces, o as sharedEdges, r as edgesOfFace, s as verticesOfEdge } from "./adjacencyFns-B2Po1gPs.js";
 export { addHoles, adjacentFaces, approximateCurve, asTopo, autoHeal, bezier, box, bsplineApprox, cast, chamferDistAngle as chamferDistAngleShape, chamferWithEvolution, checkBoolean, circle, classifyPointOnFace, clearMeshCache, compound, cone, createMeshCache, curveAxis, curveEndPoint, curveIsClosed, curveIsPeriodic, curveLength, curvePeriod, curvePointAt, curveStartPoint, curveTangentAt, cutAll, cutAllBisect, cutWithEvolution, cylinder, fromBREP as deserializeShape, downcast, edgesOfFace, ellipse, ellipseArc, ellipsoid, exportIGES, exportSTEP, exportSTL, face, faceAxis, faceCenter, faceGeomType, faceOrientation, facesOfEdge, filledFace, filletWithEvolution, fixSelfIntersection, fixShape, flipFaceOrientation, flipOrientation, fuseAll, fuseAllBisect, fuseWithEvolution, getBounds, getCurveType, getEdges, getFaces, getHashCode, getNurbsCurveData, getNurbsSurfaceData, getOrientation, getSurfaceType, getVertices, getWires, healFace, healSolid, healWire, helix, innerWires, interpolateCurve, intersectWithEvolution, invalidateShapeCache, isCompSolid, isEqualShape, isSameShape, iterEdges, iterFaces, iterTopo, iterVertices, iterWires, line, normalAt, offsetFace, offsetWire2D, outerWire, pointOnSurface, polygon, positionOnCurve, projectPointOnFace, sewShells, shapeType, sharedEdges, shellWithEvolution, solid, solidFromShell, sphere, subFace, tangentArc, threePointArc, toBufferGeometryData, toGroupedBufferGeometryData, toLineGeometryData, torus, uvBounds, uvCoordinates, variableFillet, vertex, vertexPosition, verticesOfEdge, wire, wireLoop, wiresOfFace };

package/dist/{topologyQueryFns-xh11vEQw.cjs → topologyQueryFns-4WYqtSFF.cjs}

@@ -1,4 +1,4 @@
-const require_shapeTypes = require("./shapeTypes-DJT3SnGK.cjs");
+const require_shapeTypes = require("./shapeTypes-D938X2mg.cjs");
 const require_errors = require("./errors-O_blYTWT.cjs");
 const require_constants = require("./constants-oee0S_x6.cjs");
 // src/core/kernelErrorTranslation.ts

package/dist/{topologyQueryFns-BfYdGOJc.js → topologyQueryFns-BZUY10TD.js}

@@ -1,4 +1,4 @@
-import { G as _usingCtx, N as DisposalScope, O as getOrQueryType, n as castResultShape, q as getKernel, r as castResultShapeWithKnownType } from "./shapeTypes-DAz6aAnJ.js";
+import { G as _usingCtx, N as DisposalScope, O as getOrQueryType, n as castResultShape, q as getKernel, r as castResultShapeWithKnownType } from "./shapeTypes-PNVEv6ga.js";
 import { E as ok, g as err } from "./errors-BTccWbtE.js";
 import { n as HASH_CODE_MAX } from "./constants-iraOnb2p.js";
 // src/core/kernelErrorTranslation.ts

package/dist/{validityTypes-BfOuvfyp.js → validityTypes-DAXIqwZM.js}

@@ -1,4 +1,4 @@
-import { q as getKernel } from "./shapeTypes-DAz6aAnJ.js";
+import { q as getKernel } from "./shapeTypes-PNVEv6ga.js";
 import { E as ok, g as err } from "./errors-BTccWbtE.js";
 // src/core/validityTypes.ts
 /**

package/dist/{validityTypes-CXkecqMw.cjs → validityTypes-tWSx_zAH.cjs}

@@ -1,4 +1,4 @@
-const require_shapeTypes = require("./shapeTypes-DJT3SnGK.cjs");
+const require_shapeTypes = require("./shapeTypes-D938X2mg.cjs");
 const require_errors = require("./errors-O_blYTWT.cjs");
 // src/core/validityTypes.ts
 /**

package/package.json

@@ -1,6 +1,6 @@
 {
   "name": "brepjs",
-  "version": "20.12.4",
+  "version": "20.12.5",
   "description": "Exact B-Rep CAD in TypeScript on OpenCascade WebAssembly, with a pluggable geometry kernel",
   "keywords": [
     "cad",
@@ -223,6 +223,7 @@
     "prepublishOnly": "npm run build",
     "prepack": "bash scripts/validate-pack.sh",
     "typecheck": "tsgo --noEmit",
+    "typecheck:tests": "tsgo --noEmit -p tsconfig.typecheck-tests.json",
     "typecheck:tsc": "tsc --noEmit",
     "lint": "eslint src/",
     "lint:fix": "eslint src/ --fix",