brepjs 20.12.2 → 20.12.5

package/dist/{solidBuilders-DYumkmVa.cjs → solidBuilders-CAkBQKWb.cjs}

@@ -1,14 +1,14 @@
-const require_shapeTypes = require("./shapeTypes-HDVHzNk1.cjs");
+const require_shapeTypes = require("./shapeTypes-D938X2mg.cjs");
 const require_errors = require("./errors-O_blYTWT.cjs");
-const require_topologyQueryFns = require("./topologyQueryFns-gyva7bvF.cjs");
+const require_topologyQueryFns = require("./topologyQueryFns-4WYqtSFF.cjs");
 const require_constants = require("./constants-oee0S_x6.cjs");
 const require_vecOps = require("./vecOps-CrGEPPQM.cjs");
 const require_planeOps = require("./planeOps-DZfLToKZ.cjs");
-const require_faceFns = require("./faceFns-C6fYNgZl.cjs");
-const require_originTrackingFns = require("./originTrackingFns-BRJ2PZ8J.cjs");
+const require_faceFns = require("./faceFns-Cx7cwUMx.cjs");
+const require_originTrackingFns = require("./originTrackingFns-C-yuMV3m.cjs");
 const require_faceRoleFns = require("./faceRoleFns-Db5bYj4Q.cjs");
 const require_arrayAccess = require("./arrayAccess-DpJYARwv.cjs");
-const require_surfaceBuilders = require("./surfaceBuilders-o3H-x6Ca.cjs");
+const require_surfaceBuilders = require("./surfaceBuilders-BKCiVf7T.cjs");
 // src/topology/metadata/faceTagFns.ts
 var shapeTagStore = /* @__PURE__ */ new WeakMap();
 var tagMetadataStore = /* @__PURE__ */ new WeakMap();

package/dist/{solidBuilders-CAiqZrAE.js → solidBuilders-Hft8Cr6a.js}

@@ -1,14 +1,14 @@
-import { C as isSolid, D as getShapeKind, E as GeometryCleanupError, G as _usingCtx, S as isShell, d as createSolid, f as createVertex, h as disposeResultShape, n as castResultShape, q as getKernel, s as createCompound, x as isShape3D } from "./shapeTypes-Db3yAgTO.js";
+import { C as isSolid, D as getShapeKind, E as GeometryCleanupError, G as _usingCtx, S as isShell, d as createSolid, f as createVertex, h as disposeResultShape, n as castResultShape, q as getKernel, s as createCompound, x as isShape3D } from "./shapeTypes-PNVEv6ga.js";
 import { E as ok, P as unwrap, b as isErr, d as validationError, g as err, i as kernelError, l as typeCastError, m as andThen, t as BrepErrorCode } from "./errors-BTccWbtE.js";
-import { C as subShapeHashes, c as getFaces, f as getVertices, p as getWires, s as getEdges } from "./topologyQueryFns-DKNVBMuN.js";
+import { C as subShapeHashes, c as getFaces, f as getVertices, p as getWires, s as getEdges } from "./topologyQueryFns-BZUY10TD.js";
 import { n as HASH_CODE_MAX } from "./constants-iraOnb2p.js";
 import { a as vecDot, g as vecSub, h as vecScale, t as vecAdd } from "./vecOps-S-m9H_fe.js";
 import { o as resolvePlane } from "./planeOps-D3yDuMux.js";
-import { _ as cast, y as downcast } from "./faceFns-DEDlLMcn.js";
-import { n as propagateOriginsByHash, r as propagateOriginsFromEvolution, t as getFaceOrigins } from "./originTrackingFns-BqlxFeWq.js";
+import { _ as cast, y as downcast } from "./faceFns-lE2OvBfq.js";
+import { n as propagateOriginsByHash, r as propagateOriginsFromEvolution, t as getFaceOrigins } from "./originTrackingFns-BxeUD2NM.js";
 import { n as hasFaceRoles, r as propagateFaceRolesFromEvolution } from "./faceRoleFns-BPxzQF-n.js";
 import { n as getAtOrThrow, t as firstOrThrow } from "./arrayAccess-BpgouNir.js";
-import { r as makeFace } from "./surfaceBuilders-CW6cUdk9.js";
+import { r as makeFace } from "./surfaceBuilders-CrO_BBKM.js";
 // src/topology/metadata/faceTagFns.ts
 var shapeTagStore = /* @__PURE__ */ new WeakMap();
 var tagMetadataStore = /* @__PURE__ */ new WeakMap();

package/dist/{surfaceBuilders-o3H-x6Ca.cjs → surfaceBuilders-BKCiVf7T.cjs}

@@ -1,7 +1,7 @@
-const require_shapeTypes = require("./shapeTypes-HDVHzNk1.cjs");
+const require_shapeTypes = require("./shapeTypes-D938X2mg.cjs");
 const require_errors = require("./errors-O_blYTWT.cjs");
-const require_validityTypes = require("./validityTypes-CwMwVFdY.cjs");
-const require_faceFns = require("./faceFns-C6fYNgZl.cjs");
+const require_validityTypes = require("./validityTypes-tWSx_zAH.cjs");
+const require_faceFns = require("./faceFns-Cx7cwUMx.cjs");
 // src/utils/range.ts
 /** Generate an array of integers `[0, 1, …, len - 1]`. */
 function range(len) {

package/dist/{surfaceBuilders-CW6cUdk9.js → surfaceBuilders-CrO_BBKM.js}

@@ -1,7 +1,7 @@
-import { G as _usingCtx, N as DisposalScope, c as createEdge, l as createFace, p as createWire, q as getKernel, y as isFace } from "./shapeTypes-Db3yAgTO.js";
+import { G as _usingCtx, N as DisposalScope, c as createEdge, l as createFace, p as createWire, q as getKernel, y as isFace } from "./shapeTypes-PNVEv6ga.js";
 import { E as ok, d as validationError, g as err, i as kernelError, m as andThen } from "./errors-BTccWbtE.js";
-import { a as isPlanarFace } from "./validityTypes-BmqE7KfX.js";
-import { _ as cast, u as outerWire } from "./faceFns-DEDlLMcn.js";
+import { a as isPlanarFace } from "./validityTypes-DAXIqwZM.js";
+import { _ as cast, u as outerWire } from "./faceFns-lE2OvBfq.js";
 // src/utils/range.ts
 /** Generate an array of integers `[0, 1, …, len - 1]`. */
 function range(len) {

package/dist/text.cjs

@@ -1,6 +1,6 @@
 Object.defineProperty(exports, Symbol.toStringTag, { value: "Module" });
-const require_textBlueprints = require("./textBlueprints-BSU9_W8u.cjs");
-const require_textMetrics = require("./textMetrics-BHunx03s.cjs");
+const require_textBlueprints = require("./textBlueprints-C9HeYc5a.cjs");
+const require_textMetrics = require("./textMetrics-1fhCSAGF.cjs");
 exports.fontMetrics = require_textMetrics.fontMetrics;
 exports.getFont = require_textBlueprints.getFont;
 exports.loadFont = require_textBlueprints.loadFont;

package/dist/text.js

@@ -1,3 +1,3 @@
-import { i as setFallbackFont, n as getFont, r as loadFont, t as textBlueprints } from "./textBlueprints-BE9fvro-.js";
-import { n as textMetrics, r as sketchText, t as fontMetrics } from "./textMetrics-DBqFVzjh.js";
+import { i as setFallbackFont, n as getFont, r as loadFont, t as textBlueprints } from "./textBlueprints-B8q2a-nN.js";
+import { n as textMetrics, r as sketchText, t as fontMetrics } from "./textMetrics-DJfTSy6w.js";
 export { fontMetrics, getFont, loadFont, setFallbackFont, sketchText, textBlueprints, textMetrics };

package/dist/{textBlueprints-BE9fvro-.js → textBlueprints-B8q2a-nN.js}

@@ -1,18 +1,18 @@
-import { d as createSolid, h as disposeResultShape, l as createFace, m as disposeDowncastSource, n as castResultShape, p as createWire, q as getKernel, x as isShape3D } from "./shapeTypes-Db3yAgTO.js";
+import { d as createSolid, h as disposeResultShape, l as createFace, m as disposeDowncastSource, n as castResultShape, p as createWire, q as getKernel, x as isShape3D } from "./shapeTypes-PNVEv6ga.js";
 import { n as bug } from "./bug-ClMTAJhe.js";
 import { E as ok, P as unwrap, d as validationError, g as err, i as kernelError, l as typeCastError, r as ioError, t as BrepErrorCode } from "./errors-BTccWbtE.js";
 import { n as HASH_CODE_MAX } from "./constants-iraOnb2p.js";
 import { r as toVec3 } from "./types-CKXsIm9-.js";
 import { c as vecLength, d as vecNormalize, h as vecScale, i as vecDistance, r as vecCross, t as vecAdd } from "./vecOps-S-m9H_fe.js";
 import { n as createPlane } from "./planeOps-D3yDuMux.js";
-import { v as copyShape } from "./faceFns-DEDlLMcn.js";
-import { o as makeSolid, p as cutAll, t as makeCompound } from "./solidBuilders-CAiqZrAE.js";
+import { v as copyShape } from "./faceFns-lE2OvBfq.js";
+import { o as makeSolid, p as cutAll, t as makeCompound } from "./solidBuilders-Hft8Cr6a.js";
 import { i as setFaceRoles } from "./faceRoleFns-BPxzQF-n.js";
-import { l as curveStartPoint, u as curveTangentAt } from "./curveFns-AMqd_WaO.js";
+import { l as curveStartPoint, u as curveTangentAt } from "./curveFns-BGPSFUWB.js";
 import { n as getAtOrThrow, t as firstOrThrow } from "./arrayAccess-BpgouNir.js";
-import { i as makeNewFaceWithinFace, r as makeFace, t as addHolesInFace } from "./surfaceBuilders-CW6cUdk9.js";
-import { r as organiseBlueprints, t as BlueprintSketcher } from "./blueprintSketcher-CmR6Mi91.js";
-import { c as twistExtrude, r as complexExtrude, s as sweep, t as loft } from "./loftFns-pMh0ET-J.js";
+import { i as makeNewFaceWithinFace, r as makeFace, t as addHolesInFace } from "./surfaceBuilders-CrO_BBKM.js";
+import { r as organiseBlueprints, t as BlueprintSketcher } from "./blueprintSketcher-CwTAtrkY.js";
+import { c as twistExtrude, r as complexExtrude, s as sweep, t as loft } from "./loftFns-mbyBvJ8Y.js";
 import opentype from "opentype.js";
 // src/topology/shapeRef/extrudeRoleFns.ts
 /** Match tolerance as a fraction of the extrusion's size. */
@@ -406,9 +406,18 @@ function sketchWires(sketch) {
 /**
 * Revolve a sketch around an axis to produce a solid of revolution.
 *
+* Accepts anything `Drawing.sketchOnPlane` returns: a profile with holes or
+* several profiles revolves each one and returns them as a compound.
+*
 * @remarks Consumes the sketch — calling twice throws on the second call.
 */
-function sketchRevolve(sketch, revolutionAxis, { origin } = {}) {
+function sketchRevolve(sketch, revolutionAxis, config = {}) {
+	if (!(sketch instanceof Sketch)) {
+		const solid = sketch.revolve(revolutionAxis, config);
+		if (sketch instanceof CompoundSketch) sketch.delete();
+		return solid;
+	}
+	const { origin } = config;
 	const face = unwrap(makeFace(sketch.wire));
 	const center = origin ? toVec3(origin) : sketch.defaultOrigin;
 	const dir = revolutionAxis ? toVec3(revolutionAxis) : [
@@ -425,11 +434,19 @@ function sketchRevolve(sketch, revolutionAxis, { origin } = {}) {
 * Extrude a sketch to a given distance.
 *
 * Supports profile (taper) extrusion via `extrusionProfile`, twist extrusion
-* via `twistAngle`, and direction/origin overrides.
+* via `twistAngle`, and direction/origin overrides. Accepts anything
+* `Drawing.sketchOnPlane` returns: a profile with holes or several profiles
+* extrudes each one and returns them as a compound.
 *
 * @remarks Consumes the sketch — calling twice throws on the second call.
 */
-function sketchExtrude(sketch, extrusionDistance, { extrusionDirection, extrusionProfile, twistAngle, origin } = {}) {
+function sketchExtrude(sketch, extrusionDistance, config = {}) {
+	if (!(sketch instanceof Sketch)) {
+		const solid = sketch.extrude(extrusionDistance, config);
+		if (sketch instanceof CompoundSketch) sketch.delete();
+		return solid;
+	}
+	const { extrusionDirection, extrusionProfile, twistAngle, origin } = config;
 	const direction = extrusionDirection ? toVec3(extrusionDirection) : sketch.defaultDirection;
 	const extrusionVec = vecScale(vecNormalize(direction), extrusionDistance);
 	const originVec = origin ? toVec3(origin) : sketch.defaultOrigin;
@@ -467,9 +484,13 @@ function sketchSweep(sketch, sketchOnPlane, sweepConfig = {}) {
 		...sweepConfig
 	};
 	if (sketch.baseFace) config.support = sketch.baseFace.wrapped;
-	const shape = unwrap(sweep(profile.wire, sketch.wire, config));
-	sketch.delete();
-	return shape;
+	try {
+		const shape = unwrap(sweep(profile.wire, sketch.wire, config));
+		sketch.delete();
+		return shape;
+	} finally {
+		profile.delete();
+	}
 }
 /**
 * Loft between this sketch and one or more other sketches.
@@ -744,6 +765,10 @@ var Sketches = class {
 		if (!(only instanceof Sketch)) bug(`Sketches.${op}`, `${op} is only supported on single-wire profiles.`);
 		return only;
 	}
+	/** Release the kernel resources of every contained sketch. */
+	delete() {
+		for (const s of this.sketches) s.delete();
+	}
 	/** Build a face from the sole contained profile (see {@link Sketches.faces}). */
 	face() {
 		if (this.sketches.length !== 1) bug("Sketches.face", "Multiple profiles — use faces() to combine them.");
@@ -785,14 +810,25 @@ var Sketches = class {
 	*/
 	extrude(extrusionDistance, extrusionConfig = {}) {
 		const extruded = this.sketches.map((s) => s.extrude(extrusionDistance, extrusionConfig));
-		return makeCompound(extruded);
+		return this.consumeInto(extruded);
 	}
 	/**
 	* Revolves the drawing on an axis (defined by its direction and an origin
 	* (defaults to the sketch origin)
 	*/
 	revolve(revolutionAxis, config) {
-		return makeCompound(this.sketches.map((s) => s.revolve(revolutionAxis, config)));
+		return this.consumeInto(this.sketches.map((s) => s.revolve(revolutionAxis, config)));
+	}
+	/**
+	* Combine per-profile results into one compound (which holds its own references) and
+	* release what the profiles leave behind: a `Sketch` deletes itself when extruded or
+	* revolved, but a `CompoundSketch` leaves its wires to the caller.
+	*/
+	consumeInto(parts) {
+		const compound = makeCompound(parts);
+		for (const part of parts) part[Symbol.dispose]();
+		for (const s of this.sketches) if (!(s instanceof Sketch)) s.delete();
+		return compound;
 	}
 };
 // src/text/fontRegistry.ts
@@ -900,7 +936,7 @@ function textBlueprints(text, { startX = 0, startY = 0, fontSize = 16, fontFamil
 	let font = getFont(fontFamily);
 	if (!font) font = getFont();
 	if (!font) bug("text", "No fonts loaded. Call loadFont() before using text functions.");
-	const writtenText = font.getPath(text, -startX, -startY, fontSize);
+	const writtenText = font.getPath(text, startX, -startY, fontSize);
 	const blueprints = Array.from(sketchFontCommands(writtenText.commands));
 	return organiseBlueprints(blueprints).mirror([0, 0]);
 }

package/dist/{textBlueprints-BSU9_W8u.cjs → textBlueprints-C9HeYc5a.cjs}

@@ -1,19 +1,19 @@
 const require_rolldown_runtime = require("./rolldown-runtime-BW-eSwOZ.cjs");
-const require_shapeTypes = require("./shapeTypes-HDVHzNk1.cjs");
+const require_shapeTypes = require("./shapeTypes-D938X2mg.cjs");
 const require_bug = require("./bug-CBcpIPuf.cjs");
 const require_errors = require("./errors-O_blYTWT.cjs");
 const require_constants = require("./constants-oee0S_x6.cjs");
 const require_types = require("./types-CjF9Rofr.cjs");
 const require_vecOps = require("./vecOps-CrGEPPQM.cjs");
 const require_planeOps = require("./planeOps-DZfLToKZ.cjs");
-const require_faceFns = require("./faceFns-C6fYNgZl.cjs");
-const require_solidBuilders = require("./solidBuilders-DYumkmVa.cjs");
+const require_faceFns = require("./faceFns-Cx7cwUMx.cjs");
+const require_solidBuilders = require("./solidBuilders-CAkBQKWb.cjs");
 const require_faceRoleFns = require("./faceRoleFns-Db5bYj4Q.cjs");
-const require_curveFns = require("./curveFns-CMiP40Ko.cjs");
+const require_curveFns = require("./curveFns-BKT4Sg8q.cjs");
 const require_arrayAccess = require("./arrayAccess-DpJYARwv.cjs");
-const require_surfaceBuilders = require("./surfaceBuilders-o3H-x6Ca.cjs");
-const require_blueprintSketcher = require("./blueprintSketcher-BTJqAd7E.cjs");
-const require_loftFns = require("./loftFns-BsFinbgs.cjs");
+const require_surfaceBuilders = require("./surfaceBuilders-BKCiVf7T.cjs");
+const require_blueprintSketcher = require("./blueprintSketcher-CZyokLGJ.cjs");
+const require_loftFns = require("./loftFns-AHaYxJyS.cjs");
 let opentype_js = require("opentype.js");
 opentype_js = require_rolldown_runtime.__toESM(opentype_js, 1);
 // src/topology/shapeRef/extrudeRoleFns.ts
@@ -408,9 +408,18 @@ function sketchWires(sketch) {
 /**
 * Revolve a sketch around an axis to produce a solid of revolution.
 *
+* Accepts anything `Drawing.sketchOnPlane` returns: a profile with holes or
+* several profiles revolves each one and returns them as a compound.
+*
 * @remarks Consumes the sketch — calling twice throws on the second call.
 */
-function sketchRevolve(sketch, revolutionAxis, { origin } = {}) {
+function sketchRevolve(sketch, revolutionAxis, config = {}) {
+	if (!(sketch instanceof Sketch)) {
+		const solid = sketch.revolve(revolutionAxis, config);
+		if (sketch instanceof CompoundSketch) sketch.delete();
+		return solid;
+	}
+	const { origin } = config;
 	const face = require_errors.unwrap(require_surfaceBuilders.makeFace(sketch.wire));
 	const center = origin ? require_types.toVec3(origin) : sketch.defaultOrigin;
 	const dir = revolutionAxis ? require_types.toVec3(revolutionAxis) : [
@@ -427,11 +436,19 @@ function sketchRevolve(sketch, revolutionAxis, { origin } = {}) {
 * Extrude a sketch to a given distance.
 *
 * Supports profile (taper) extrusion via `extrusionProfile`, twist extrusion
-* via `twistAngle`, and direction/origin overrides.
+* via `twistAngle`, and direction/origin overrides. Accepts anything
+* `Drawing.sketchOnPlane` returns: a profile with holes or several profiles
+* extrudes each one and returns them as a compound.
 *
 * @remarks Consumes the sketch — calling twice throws on the second call.
 */
-function sketchExtrude(sketch, extrusionDistance, { extrusionDirection, extrusionProfile, twistAngle, origin } = {}) {
+function sketchExtrude(sketch, extrusionDistance, config = {}) {
+	if (!(sketch instanceof Sketch)) {
+		const solid = sketch.extrude(extrusionDistance, config);
+		if (sketch instanceof CompoundSketch) sketch.delete();
+		return solid;
+	}
+	const { extrusionDirection, extrusionProfile, twistAngle, origin } = config;
 	const direction = extrusionDirection ? require_types.toVec3(extrusionDirection) : sketch.defaultDirection;
 	const extrusionVec = require_vecOps.vecScale(require_vecOps.vecNormalize(direction), extrusionDistance);
 	const originVec = origin ? require_types.toVec3(origin) : sketch.defaultOrigin;
@@ -469,9 +486,13 @@ function sketchSweep(sketch, sketchOnPlane, sweepConfig = {}) {
 		...sweepConfig
 	};
 	if (sketch.baseFace) config.support = sketch.baseFace.wrapped;
-	const shape = require_errors.unwrap(require_loftFns.sweep(profile.wire, sketch.wire, config));
-	sketch.delete();
-	return shape;
+	try {
+		const shape = require_errors.unwrap(require_loftFns.sweep(profile.wire, sketch.wire, config));
+		sketch.delete();
+		return shape;
+	} finally {
+		profile.delete();
+	}
 }
 /**
 * Loft between this sketch and one or more other sketches.
@@ -746,6 +767,10 @@ var Sketches = class {
 		if (!(only instanceof Sketch)) require_bug.bug(`Sketches.${op}`, `${op} is only supported on single-wire profiles.`);
 		return only;
 	}
+	/** Release the kernel resources of every contained sketch. */
+	delete() {
+		for (const s of this.sketches) s.delete();
+	}
 	/** Build a face from the sole contained profile (see {@link Sketches.faces}). */
 	face() {
 		if (this.sketches.length !== 1) require_bug.bug("Sketches.face", "Multiple profiles — use faces() to combine them.");
@@ -787,14 +812,25 @@ var Sketches = class {
 	*/
 	extrude(extrusionDistance, extrusionConfig = {}) {
 		const extruded = this.sketches.map((s) => s.extrude(extrusionDistance, extrusionConfig));
-		return require_solidBuilders.makeCompound(extruded);
+		return this.consumeInto(extruded);
 	}
 	/**
 	* Revolves the drawing on an axis (defined by its direction and an origin
 	* (defaults to the sketch origin)
 	*/
 	revolve(revolutionAxis, config) {
-		return require_solidBuilders.makeCompound(this.sketches.map((s) => s.revolve(revolutionAxis, config)));
+		return this.consumeInto(this.sketches.map((s) => s.revolve(revolutionAxis, config)));
+	}
+	/**
+	* Combine per-profile results into one compound (which holds its own references) and
+	* release what the profiles leave behind: a `Sketch` deletes itself when extruded or
+	* revolved, but a `CompoundSketch` leaves its wires to the caller.
+	*/
+	consumeInto(parts) {
+		const compound = require_solidBuilders.makeCompound(parts);
+		for (const part of parts) part[Symbol.dispose]();
+		for (const s of this.sketches) if (!(s instanceof Sketch)) s.delete();
+		return compound;
 	}
 };
 // src/text/fontRegistry.ts
@@ -902,7 +938,7 @@ function textBlueprints(text, { startX = 0, startY = 0, fontSize = 16, fontFamil
 	let font = getFont(fontFamily);
 	if (!font) font = getFont();
 	if (!font) require_bug.bug("text", "No fonts loaded. Call loadFont() before using text functions.");
-	const writtenText = font.getPath(text, -startX, -startY, fontSize);
+	const writtenText = font.getPath(text, startX, -startY, fontSize);
 	const blueprints = Array.from(sketchFontCommands(writtenText.commands));
 	return require_blueprintSketcher.organiseBlueprints(blueprints).mirror([0, 0]);
 }

package/dist/{textMetrics-BHunx03s.cjs → textMetrics-1fhCSAGF.cjs}

@@ -1,5 +1,5 @@
 const require_errors = require("./errors-O_blYTWT.cjs");
-const require_textBlueprints = require("./textBlueprints-BSU9_W8u.cjs");
+const require_textBlueprints = require("./textBlueprints-C9HeYc5a.cjs");
 // src/text/sketchText.ts
 /**
 * Render text as 3D sketch outlines on a plane.

package/dist/{textMetrics-DBqFVzjh.js → textMetrics-DJfTSy6w.js}

@@ -1,5 +1,5 @@
 import { E as ok, d as validationError, g as err, t as BrepErrorCode } from "./errors-BTccWbtE.js";
-import { _ as wrapSketchData, a as Sketches, n as getFont, t as textBlueprints, y as CompoundSketch } from "./textBlueprints-BE9fvro-.js";
+import { _ as wrapSketchData, a as Sketches, n as getFont, t as textBlueprints, y as CompoundSketch } from "./textBlueprints-B8q2a-nN.js";
 // src/text/sketchText.ts
 /**
 * Render text as 3D sketch outlines on a plane.

package/dist/{threadFns-DckgA8OY.cjs → threadFns-CVIEbOW3.cjs}

@@ -1,12 +1,12 @@
-const require_shapeTypes = require("./shapeTypes-HDVHzNk1.cjs");
+const require_shapeTypes = require("./shapeTypes-D938X2mg.cjs");
 const require_errors = require("./errors-O_blYTWT.cjs");
 const require_vecOps = require("./vecOps-CrGEPPQM.cjs");
-const require_faceFns = require("./faceFns-C6fYNgZl.cjs");
-const require_solidBuilders = require("./solidBuilders-DYumkmVa.cjs");
-const require_primitiveFns = require("./primitiveFns-wOdKnYBs.cjs");
-const require_shapeFns = require("./shapeFns-CHFmX5HQ.cjs");
-const require_loftFns = require("./loftFns-BsFinbgs.cjs");
-const require_refResolveFns = require("./refResolveFns-C23E6pcj.cjs");
+const require_faceFns = require("./faceFns-Cx7cwUMx.cjs");
+const require_solidBuilders = require("./solidBuilders-CAkBQKWb.cjs");
+const require_primitiveFns = require("./primitiveFns-BVAkYHVf.cjs");
+const require_shapeFns = require("./shapeFns-CwjjUOr0.cjs");
+const require_loftFns = require("./loftFns-AHaYxJyS.cjs");
+const require_refResolveFns = require("./refResolveFns-CaAw-ya3.cjs");
 // src/utils/uuid.ts
 /** Generate a v4-style UUID string using `crypto.getRandomValues`. */
 function uuidv() {
@@ -147,7 +147,7 @@ function quatMultiply(a, b) {
 */
 function linearPattern(shape, direction, count, spacing, options) {
 	if (count < 1) return require_errors.err(require_errors.validationError("PATTERN_INVALID_COUNT", "Pattern count must be at least 1"));
-	if (count === 1) return require_errors.ok(shape);
+	if (count === 1) return require_shapeFns.clone(shape);
 	if (require_vecOps.vecIsZero(direction)) return require_errors.err(require_errors.validationError("PATTERN_ZERO_DIRECTION", "Pattern direction cannot be zero"));
 	const dir = require_vecOps.vecNormalize(direction);
 	const copies = require_shapeTypes.getKernel().linearPattern(shape.wrapped, [...dir], spacing, count).map((s) => require_shapeTypes.castResultShape(s));
@@ -163,10 +163,15 @@ function linearPattern(shape, direction, count, spacing, options) {
 /**
 * Create a circular pattern of a shape around an axis.
 *
+* A full turn (`fullAngle` of ±360) spaces the copies `fullAngle / count`
+* apart, so the last copy does not land on the first. Any other angle is an
+* open arc: the first copy stays in place, the last lands at `fullAngle`, and
+* they are spaced `fullAngle / (count - 1)` apart.
+*
 * @param shape - The shape to replicate
 * @param axis - Rotation axis direction
 * @param count - Total number of copies (including the original)
-* @param fullAngle - Total angle to spread copies over in degrees (default: 360)
+* @param fullAngle - Angle in degrees the copies span (default: 360)
 * @param center - Center point of rotation (default: [0,0,0])
 * @param options - Boolean options for the fuse operation
 * @returns Fused shape of all copies
@@ -177,9 +182,9 @@ function circularPattern(shape, axis, count, fullAngle = 360, center = [
 	0
 ], options) {
 	if (count < 1) return require_errors.err(require_errors.validationError("PATTERN_INVALID_COUNT", "Pattern count must be at least 1"));
-	if (count === 1) return require_errors.ok(shape);
+	if (count === 1) return require_shapeFns.clone(shape);
 	if (require_vecOps.vecIsZero(axis)) return require_errors.err(require_errors.validationError("PATTERN_ZERO_AXIS", "Pattern axis cannot be zero"));
-	const angleStep = fullAngle / count;
+	const angleStep = fullAngle / (Math.abs(Math.abs(fullAngle) - 360) < 1e-9 ? count : count - 1);
 	const copies = require_shapeTypes.getKernel().circularPattern(shape.wrapped, [...center], [...axis], angleStep, count).map((s) => require_shapeTypes.castResultShape(s));
 	try {
 		return require_solidBuilders.fuseAll(copies, {
@@ -204,24 +209,27 @@ function circularPattern(shape, axis, count, fullAngle = 360, center = [
 * @returns Compound shape containing all copies, or fused result
 */
 function gridPattern(shape, directionX, directionY, countX, countY, spacingX, spacingY, options) {
-	if (countX < 1 || countY < 1) return require_errors.err(require_errors.validationError("PATTERN_INVALID_COUNT", "Grid pattern counts must be at least 1"));
-	if (countX === 1 && countY === 1) return require_errors.ok(shape);
-	if (require_vecOps.vecIsZero(directionX)) return require_errors.err(require_errors.validationError("PATTERN_ZERO_DIRECTION", "Grid directionX cannot be zero"));
-	if (require_vecOps.vecIsZero(directionY)) return require_errors.err(require_errors.validationError("PATTERN_ZERO_DIRECTION", "Grid directionY cannot be zero"));
-	const kernel = require_shapeTypes.getKernel();
-	const dirX = require_vecOps.vecNormalize(directionX);
-	const dirY = require_vecOps.vecNormalize(directionY);
-	if (typeof kernel.gridPattern === "function") {
-		const compound = kernel.gridPattern(shape.wrapped, [...dirX], [...dirY], spacingX, spacingY, countX, countY);
-		return require_errors.ok(require_shapeTypes.castResultShape(compound));
-	}
-	const rowResult = linearPattern(shape, directionX, countX, spacingX, options);
-	if (!rowResult.ok) return rowResult;
-	const row = rowResult.value;
-	const out = linearPattern(row, directionY, countY, spacingY, options);
-	const passthrough = out.ok && out.value === row;
-	if (row !== shape && !passthrough) row[Symbol.dispose]();
-	return out;
+	try {
+		var _usingCtx$2 = require_shapeTypes._usingCtx();
+		if (countX < 1 || countY < 1) return require_errors.err(require_errors.validationError("PATTERN_INVALID_COUNT", "Grid pattern counts must be at least 1"));
+		if (countX === 1 && countY === 1) return require_shapeFns.clone(shape);
+		if (require_vecOps.vecIsZero(directionX)) return require_errors.err(require_errors.validationError("PATTERN_ZERO_DIRECTION", "Grid directionX cannot be zero"));
+		if (require_vecOps.vecIsZero(directionY)) return require_errors.err(require_errors.validationError("PATTERN_ZERO_DIRECTION", "Grid directionY cannot be zero"));
+		const kernel = require_shapeTypes.getKernel();
+		const dirX = require_vecOps.vecNormalize(directionX);
+		const dirY = require_vecOps.vecNormalize(directionY);
+		if (typeof kernel.gridPattern === "function") {
+			const compound = kernel.gridPattern(shape.wrapped, [...dirX], [...dirY], spacingX, spacingY, countX, countY);
+			return require_errors.ok(require_shapeTypes.castResultShape(compound));
+		}
+		const rowResult = linearPattern(shape, directionX, countX, spacingX, options);
+		if (!rowResult.ok) return rowResult;
+		return linearPattern(_usingCtx$2.u(rowResult.value), directionY, countY, spacingY, options);
+	} catch (_) {
+		_usingCtx$2.e = _;
+	} finally {
+		_usingCtx$2.d();
+	}
 }
 // src/operations/exporterFns.ts
 /**

package/dist/{threadFns-DViBlfHh.js → threadFns-f2KwibLR.js}

@@ -1,12 +1,12 @@
-import { F as createKernelHandle, G as _usingCtx, N as DisposalScope, n as castResultShape, q as getKernel, x as isShape3D } from "./shapeTypes-Db3yAgTO.js";
+import { F as createKernelHandle, G as _usingCtx, N as DisposalScope, n as castResultShape, q as getKernel, x as isShape3D } from "./shapeTypes-PNVEv6ga.js";
 import { E as ok, d as validationError, g as err, n as computationError, r as ioError, t as BrepErrorCode, x as isOk } from "./errors-BTccWbtE.js";
 import { d as vecNormalize, s as vecIsZero } from "./vecOps-S-m9H_fe.js";
-import { b as fromBREP } from "./faceFns-DEDlLMcn.js";
-import { h as fuseAll } from "./solidBuilders-CAiqZrAE.js";
-import { E as wire, h as line } from "./primitiveFns-DrEUKZvX.js";
-import { s as toBREP } from "./shapeFns-D7DcPxfx.js";
-import { t as loft } from "./loftFns-pMh0ET-J.js";
-import { c as resolveRefParams } from "./refResolveFns-BqcjC50D.js";
+import { b as fromBREP } from "./faceFns-lE2OvBfq.js";
+import { h as fuseAll } from "./solidBuilders-Hft8Cr6a.js";
+import { E as wire, h as line } from "./primitiveFns-CualoFAk.js";
+import { s as toBREP, t as clone } from "./shapeFns-CdrDroOM.js";
+import { t as loft } from "./loftFns-mbyBvJ8Y.js";
+import { c as resolveRefParams } from "./refResolveFns--SRyN2qa.js";
 // src/utils/uuid.ts
 /** Generate a v4-style UUID string using `crypto.getRandomValues`. */
 function uuidv() {
@@ -147,7 +147,7 @@ function quatMultiply(a, b) {
 */
 function linearPattern(shape, direction, count, spacing, options) {
 	if (count < 1) return err(validationError("PATTERN_INVALID_COUNT", "Pattern count must be at least 1"));
-	if (count === 1) return ok(shape);
+	if (count === 1) return clone(shape);
 	if (vecIsZero(direction)) return err(validationError("PATTERN_ZERO_DIRECTION", "Pattern direction cannot be zero"));
 	const dir = vecNormalize(direction);
 	const copies = getKernel().linearPattern(shape.wrapped, [...dir], spacing, count).map((s) => castResultShape(s));
@@ -163,10 +163,15 @@ function linearPattern(shape, direction, count, spacing, options) {
 /**
 * Create a circular pattern of a shape around an axis.
 *
+* A full turn (`fullAngle` of ±360) spaces the copies `fullAngle / count`
+* apart, so the last copy does not land on the first. Any other angle is an
+* open arc: the first copy stays in place, the last lands at `fullAngle`, and
+* they are spaced `fullAngle / (count - 1)` apart.
+*
 * @param shape - The shape to replicate
 * @param axis - Rotation axis direction
 * @param count - Total number of copies (including the original)
-* @param fullAngle - Total angle to spread copies over in degrees (default: 360)
+* @param fullAngle - Angle in degrees the copies span (default: 360)
 * @param center - Center point of rotation (default: [0,0,0])
 * @param options - Boolean options for the fuse operation
 * @returns Fused shape of all copies
@@ -177,9 +182,9 @@ function circularPattern(shape, axis, count, fullAngle = 360, center = [
 	0
 ], options) {
 	if (count < 1) return err(validationError("PATTERN_INVALID_COUNT", "Pattern count must be at least 1"));
-	if (count === 1) return ok(shape);
+	if (count === 1) return clone(shape);
 	if (vecIsZero(axis)) return err(validationError("PATTERN_ZERO_AXIS", "Pattern axis cannot be zero"));
-	const angleStep = fullAngle / count;
+	const angleStep = fullAngle / (Math.abs(Math.abs(fullAngle) - 360) < 1e-9 ? count : count - 1);
 	const copies = getKernel().circularPattern(shape.wrapped, [...center], [...axis], angleStep, count).map((s) => castResultShape(s));
 	try {
 		return fuseAll(copies, {
@@ -204,24 +209,27 @@ function circularPattern(shape, axis, count, fullAngle = 360, center = [
 * @returns Compound shape containing all copies, or fused result
 */
 function gridPattern(shape, directionX, directionY, countX, countY, spacingX, spacingY, options) {
-	if (countX < 1 || countY < 1) return err(validationError("PATTERN_INVALID_COUNT", "Grid pattern counts must be at least 1"));
-	if (countX === 1 && countY === 1) return ok(shape);
-	if (vecIsZero(directionX)) return err(validationError("PATTERN_ZERO_DIRECTION", "Grid directionX cannot be zero"));
-	if (vecIsZero(directionY)) return err(validationError("PATTERN_ZERO_DIRECTION", "Grid directionY cannot be zero"));
-	const kernel = getKernel();
-	const dirX = vecNormalize(directionX);
-	const dirY = vecNormalize(directionY);
-	if (typeof kernel.gridPattern === "function") {
-		const compound = kernel.gridPattern(shape.wrapped, [...dirX], [...dirY], spacingX, spacingY, countX, countY);
-		return ok(castResultShape(compound));
+	try {
+		var _usingCtx$2 = _usingCtx();
+		if (countX < 1 || countY < 1) return err(validationError("PATTERN_INVALID_COUNT", "Grid pattern counts must be at least 1"));
+		if (countX === 1 && countY === 1) return clone(shape);
+		if (vecIsZero(directionX)) return err(validationError("PATTERN_ZERO_DIRECTION", "Grid directionX cannot be zero"));
+		if (vecIsZero(directionY)) return err(validationError("PATTERN_ZERO_DIRECTION", "Grid directionY cannot be zero"));
+		const kernel = getKernel();
+		const dirX = vecNormalize(directionX);
+		const dirY = vecNormalize(directionY);
+		if (typeof kernel.gridPattern === "function") {
+			const compound = kernel.gridPattern(shape.wrapped, [...dirX], [...dirY], spacingX, spacingY, countX, countY);
+			return ok(castResultShape(compound));
+		}
+		const rowResult = linearPattern(shape, directionX, countX, spacingX, options);
+		if (!rowResult.ok) return rowResult;
+		return linearPattern(_usingCtx$2.u(rowResult.value), directionY, countY, spacingY, options);
+	} catch (_) {
+		_usingCtx$2.e = _;
+	} finally {
+		_usingCtx$2.d();
 	}
-	const rowResult = linearPattern(shape, directionX, countX, spacingX, options);
-	if (!rowResult.ok) return rowResult;
-	const row = rowResult.value;
-	const out = linearPattern(row, directionY, countY, spacingY, options);
-	const passthrough = out.ok && out.value === row;
-	if (row !== shape && !passthrough) row[Symbol.dispose]();
-	return out;
 }
 // src/operations/exporterFns.ts
 /**

package/dist/topology/apiTypes.d.ts

@@ -2,13 +2,14 @@ import { Vec2, Vec3 } from '../core/types.js';
 import { AnyShape, Dimension, Edge, Face, Wire, Shape3D } from '../core/shapeTypes.js';
 import { EdgeFinderFn, FaceFinderFn, ShapeFinder } from '../query/finderFns.js';
 /**
- * Structural type matching a Drawing's wire-producing interface.
- * Used in place of importing the actual Drawing class to avoid
- * Layer 2 → Layer 3 boundary violations.
+ * Structural type matching a Drawing: it sketches onto a plane as something
+ * that builds a face (holes included). Used in place of importing the actual
+ * Drawing class to avoid Layer 2 → Layer 3 boundary violations.
  */
 export interface DrawingLike {
-    sketchOnPlane(plane: string): {
-        wire: Wire;
+    sketchOnPlane(plane: 'XY'): {
+        face(): Face;
+        delete?(): void;
     };
 }
 type FinderFor<T extends AnyShape<Dimension>> = T extends Edge ? EdgeFinderFn : T extends Face ? FaceFinderFn : ShapeFinder<T>;
@@ -66,7 +67,12 @@ export interface DrillOptions {
 }
 /** Options for the pocket() compound operation. */
 export interface PocketOptions {
-    /** 2D profile shape to cut into the face. */
+    /**
+     * 2D profile to cut into the face, drawn in XY with its origin at the face
+     * centre. On faces parallel to XY it keeps the world X and Y axes; on any
+     * other face its Y axis runs up the face and its X axis points right as seen
+     * from outside.
+     */
     profile: DrawingLike | Wire;
     /** Which face to pocket. Default: top face. */
     face?: Face | FinderFn<Face>;
@@ -75,7 +81,7 @@ export interface PocketOptions {
 }
 /** Options for the boss() compound operation. */
 export interface BossOptions {
-    /** 2D profile shape to extrude onto the face. */
+    /** 2D profile to extrude from the face, placed as for {@link PocketOptions.profile}. */
     profile: DrawingLike | Wire;
     /** Which face to add onto. Default: top face. */
     face?: Face | FinderFn<Face>;