brepjs 20.12.10 → 20.12.12

package/dist/{helpers-WdI_vPa4.js → helpers-BuI9lh-t.js}

@@ -1,12 +1,12 @@
-import { q as getKernel, y as isFace } from "./shapeTypes-Ccp9iVna.js";
+import { q as getKernel, y as isFace } from "./shapeTypes-DoPnZHn_.js";
 import { E as ok, g as err, o as queryError, x as isOk } from "./errors-BTccWbtE.js";
-import { c as getFaces, f as getVertices, p as getWires, s as getEdges } from "./topologyQueryFns-D7j1fl0n.js";
+import { c as getFaces, f as getVertices, p as getWires, s as getEdges } from "./topologyQueryFns-yOGEI9hO.js";
 import { t as DEG2RAD } from "./constants-iraOnb2p.js";
 import { a as vecDot, d as vecNormalize } from "./vecOps-S-m9H_fe.js";
-import { l as normalAt, s as getSurfaceType } from "./faceFns-DvnSVq5k.js";
-import { a as isSameShape, n as getHashCode } from "./shapeFns-pMt-Oz0f.js";
-import { f as getCurveType, i as curveIsClosed, o as curveLength } from "./curveFns-DpAho4sY.js";
-import { n as measureArea } from "./measureFns-DmL9FRQC.js";
+import { l as normalAt, s as getSurfaceType } from "./faceFns-2jGPfqvB.js";
+import { a as isSameShape, n as getHashCode } from "./shapeFns-kFm-m8jh.js";
+import { f as getCurveType, i as curveIsClosed, o as curveLength } from "./curveFns-EsJgIpc6.js";
+import { n as measureArea } from "./measureFns--UKrACtx.js";
 // src/utils/vec2d.ts
 /** Precision for curve intersection and parameter operations. */
 var PRECISION_INTERSECTION = 1e-9;

package/dist/{helpers-6DyPwHPE.cjs → helpers-D7Y4Vxhf.cjs}

@@ -1,12 +1,12 @@
-const require_shapeTypes = require("./shapeTypes-B9ACN7a8.cjs");
+const require_shapeTypes = require("./shapeTypes-C06KHgTm.cjs");
 const require_errors = require("./errors-O_blYTWT.cjs");
-const require_topologyQueryFns = require("./topologyQueryFns-DEax1nqt.cjs");
+const require_topologyQueryFns = require("./topologyQueryFns-BUhKY2Kj.cjs");
 const require_constants = require("./constants-oee0S_x6.cjs");
 const require_vecOps = require("./vecOps-CrGEPPQM.cjs");
-const require_faceFns = require("./faceFns-mca5oNNe.cjs");
-const require_shapeFns = require("./shapeFns-DCiFtMCX.cjs");
-const require_curveFns = require("./curveFns-B1ZGAua6.cjs");
-const require_measureFns = require("./measureFns-JNQma34N.cjs");
+const require_faceFns = require("./faceFns-Jo9hMVqL.cjs");
+const require_shapeFns = require("./shapeFns-D47cmLG8.cjs");
+const require_curveFns = require("./curveFns-B8mm5cou.cjs");
+const require_measureFns = require("./measureFns-D8uSDn-8.cjs");
 // src/utils/vec2d.ts
 /** Precision for curve intersection and parameter operations. */
 var PRECISION_INTERSECTION = 1e-9;

package/dist/{importFns-DN5oxh4I.cjs → importFns-Dwlc0KtB.cjs}

@@ -1,12 +1,12 @@
-const require_shapeTypes = require("./shapeTypes-B9ACN7a8.cjs");
+const require_shapeTypes = require("./shapeTypes-C06KHgTm.cjs");
 const require_bug = require("./bug-CBcpIPuf.cjs");
 const require_errors = require("./errors-O_blYTWT.cjs");
-const require_topologyQueryFns = require("./topologyQueryFns-DEax1nqt.cjs");
+const require_topologyQueryFns = require("./topologyQueryFns-BUhKY2Kj.cjs");
 const require_constants = require("./constants-oee0S_x6.cjs");
-const require_solidBuilders = require("./solidBuilders-DwqlsNW1.cjs");
-const require_meshFns = require("./meshFns-CsMwXvw3.cjs");
+const require_solidBuilders = require("./solidBuilders-Dwm0hXn5.cjs");
+const require_meshFns = require("./meshFns-Cs_qrlXI.cjs");
 const require_arrayAccess = require("./arrayAccess-DpJYARwv.cjs");
-const require_blueprint = require("./blueprint-D_T-AYNd.cjs");
+const require_blueprint = require("./blueprint-DtPRNDEu.cjs");
 // src/io/objExportFns.ts
 /** Read a vec3 from a typed array at the given vertex index. */
 function vec3At(arr, i) {

package/dist/{importFns-D7KuHlJx.js → importFns-TKzj4FaZ.js}

@@ -1,12 +1,12 @@
-import { C as isSolid, G as _usingCtx, n as castResultShape, q as getKernel } from "./shapeTypes-Ccp9iVna.js";
+import { C as isSolid, G as _usingCtx, n as castResultShape, q as getKernel } from "./shapeTypes-DoPnZHn_.js";
 import { i as wasmIndex, r as vec3At$1 } from "./bug-ClMTAJhe.js";
 import { E as ok, g as err, r as ioError, t as BrepErrorCode } from "./errors-BTccWbtE.js";
-import { S as subShapeCount, c as getFaces, u as getShells } from "./topologyQueryFns-D7j1fl0n.js";
+import { S as subShapeCount, c as getFaces, u as getShells } from "./topologyQueryFns-yOGEI9hO.js";
 import { n as HASH_CODE_MAX } from "./constants-iraOnb2p.js";
-import { t as makeCompound } from "./solidBuilders-BltNQKqZ.js";
-import { u as igesUnsupportedError } from "./meshFns-CqLLizwL.js";
+import { t as makeCompound } from "./solidBuilders-ZDGdvaTU.js";
+import { u as igesUnsupportedError } from "./meshFns-Bo4EQJFO.js";
 import { n as getAtOrThrow } from "./arrayAccess-BpgouNir.js";
-import { c as make2dBezierCurve, h as make2dThreePointArc, p as make2dSegmentCurve, t as Blueprint } from "./blueprint-BX9jLBWa.js";
+import { c as make2dBezierCurve, h as make2dThreePointArc, p as make2dSegmentCurve, t as Blueprint } from "./blueprint-BYXwa2cF.js";
 // src/io/objExportFns.ts
 /** Read a vec3 from a typed array at the given vertex index. */
 function vec3At(arr, i) {

package/dist/io/stepConfigFns.d.ts

@@ -6,7 +6,7 @@ export interface StepExportOptions {
     readonly unit?: string | undefined;
     /** Model unit override. */
     readonly modelUnit?: string | undefined;
-    /** STEP schema version (e.g., 203, 214, 242). */
+    /** STEP application protocol: 203, 214 (the default), or 242. */
     readonly schema?: number | undefined;
 }
 /** A shape with optional name and color for STEP assembly export. */

package/dist/io.cjs

@@ -1,6 +1,6 @@
 Object.defineProperty(exports, Symbol.toStringTag, { value: "Module" });
-const require_meshFns = require("./meshFns-CsMwXvw3.cjs");
-const require_importFns = require("./importFns-DN5oxh4I.cjs");
+const require_meshFns = require("./meshFns-Cs_qrlXI.cjs");
+const require_importFns = require("./importFns-Dwlc0KtB.cjs");
 exports.blueprintToDXF = require_importFns.blueprintToDXF;
 exports.exportDXF = require_importFns.exportDXF;
 exports.exportGlb = require_importFns.exportGlb;

package/dist/io.js

@@ -1,3 +1,3 @@
-import { n as exportSTEP, r as exportSTL, t as exportIGES } from "./meshFns-CqLLizwL.js";
-import { a as exportSTEPConfigured, c as exportThreeMF, d as exportGlb, f as exportGltf, l as blueprintToDXF, n as importSTEP, o as importSVG, p as exportOBJ, r as importSTL, s as importSVGPathD, t as importIGES, u as exportDXF } from "./importFns-D7KuHlJx.js";
+import { n as exportSTEP, r as exportSTL, t as exportIGES } from "./meshFns-Bo4EQJFO.js";
+import { a as exportSTEPConfigured, c as exportThreeMF, d as exportGlb, f as exportGltf, l as blueprintToDXF, n as importSTEP, o as importSVG, p as exportOBJ, r as importSTL, s as importSVGPathD, t as importIGES, u as exportDXF } from "./importFns-TKzj4FaZ.js";
 export { blueprintToDXF, exportDXF, exportGlb, exportGltf, exportIGES, exportOBJ, exportSTEP, exportSTEPConfigured, exportSTL, exportThreeMF, importIGES, importSTEP, importSTL, importSVG, importSVGPathD };

package/dist/kernel/occtWasm/helpers.d.ts

@@ -39,6 +39,7 @@ export declare function runEdgeTreatment<T>(Module: OcctWasmModule, edges: Kerne
 export declare function draftAnglesRad(faces: readonly KernelShape[], angleDeg: number | ((face: KernelShape) => number)): number[];
 /** The peer range still admits older builds, which lack the per-edge and unit entry points. */
 export declare function needsOcctWasm59(what: string): UnsupportedKernelOperationError;
+export declare function needsOcctWasm510(what: string): UnsupportedKernelOperationError;
 /**
  * Rotate a shape from the kernel's default Z-axis to an arbitrary direction.
  * Used by primitives whose creation API only takes a Z-aligned form.

package/dist/kernel/occtWasm/occtWasmAdapter.cjs

@@ -1,3 +1,3 @@
 Object.defineProperty(exports, Symbol.toStringTag, { value: "Module" });
-const require_occtWasmAdapter = require("../../occtWasmAdapter-DTEpwXuT.cjs");
+const require_occtWasmAdapter = require("../../occtWasmAdapter-BK--kx4R.cjs");
 exports.OcctWasmAdapter = require_occtWasmAdapter.OcctWasmAdapter;

package/dist/kernel/occtWasm/occtWasmAdapter.js

@@ -1 +1 @@
-export { t as OcctWasmAdapter } from "../../occtWasmAdapter-Dr70YU4m.js";
+export { t as OcctWasmAdapter } from "../../occtWasmAdapter-C-Qi-jxS.js";

package/dist/kernel/occtWasm/occtWasmTypes.d.ts

@@ -253,6 +253,8 @@ export interface OcctKernelWasm {
      * inch, ft, mi, mil, um, uin). Geometry is read as millimeters.
      */
     exportStepWithUnit?(id: number, unit: string): string;
+    /** occt-wasm >= 5.10.0: `schema` is 'AP203', 'AP214', or 'AP242'; '' keeps AP214. */
+    exportStepWithOptions?(id: number, unit: string, schema: string): string;
     importStl(data: string): number;
     /** Absent from published occt-wasm builds (no IGES translator), so callers feature-detect. */
     importIges?(data: string): number;
@@ -307,6 +309,8 @@ export interface OcctKernelWasm {
     xcafExportSTEP(docId: number): string;
     /** occt-wasm >= 5.9.0: units as in {@link exportStepWithUnit}. */
     xcafExportSTEPWithUnit?(docId: number, unit: string): string;
+    /** occt-wasm >= 5.10.0: unit and schema as in {@link exportStepWithOptions}. */
+    xcafExportSTEPWithOptions?(docId: number, unit: string, schema: string): string;
     bsplineSurface(flatPoints: EmVectorDouble, rows: number, cols: number): number;
     makeFaceOnSurface(faceId: number, wireId: number): number;
     makeNullShape(): number;

package/dist/{loftFns-Udobz6tm.cjs → loftFns-CnerVgTM.cjs}

@@ -1,4 +1,4 @@
-const require_shapeTypes = require("./shapeTypes-B9ACN7a8.cjs");
+const require_shapeTypes = require("./shapeTypes-C06KHgTm.cjs");
 const require_errors = require("./errors-O_blYTWT.cjs");
 const require_types = require("./types-CjF9Rofr.cjs");
 const require_vecOps = require("./vecOps-CrGEPPQM.cjs");

package/dist/{loftFns-DE21800M.js → loftFns-jnQL_zpD.js}

@@ -1,4 +1,4 @@
-import { G as _usingCtx, T as isWire, h as disposeResultShape, n as castResultShape, q as getKernel, x as isShape3D } from "./shapeTypes-Ccp9iVna.js";
+import { G as _usingCtx, T as isWire, h as disposeResultShape, n as castResultShape, q as getKernel, x as isShape3D } from "./shapeTypes-DoPnZHn_.js";
 import { E as ok, b as isErr, d as validationError, g as err, i as kernelError, l as typeCastError, t as BrepErrorCode } from "./errors-BTccWbtE.js";
 import { r as toVec3 } from "./types-CKXsIm9-.js";
 import { c as vecLength, t as vecAdd } from "./vecOps-S-m9H_fe.js";

package/dist/{measureFns-DmL9FRQC.js → measureFns--UKrACtx.js}

@@ -1,7 +1,7 @@
-import { q as getKernel } from "./shapeTypes-Ccp9iVna.js";
+import { q as getKernel } from "./shapeTypes-DoPnZHn_.js";
 import { E as ok, d as validationError, g as err, t as BrepErrorCode } from "./errors-BTccWbtE.js";
-import { E as kernelCallRaw } from "./topologyQueryFns-D7j1fl0n.js";
-import { m as uvBounds } from "./faceFns-DvnSVq5k.js";
+import { E as kernelCallRaw } from "./topologyQueryFns-yOGEI9hO.js";
+import { m as uvBounds } from "./faceFns-2jGPfqvB.js";
 // src/measurement/measureCache.ts
 var cache = /* @__PURE__ */ new WeakMap();
 function getCachedMeasurement(shape, key) {
@@ -30,6 +30,8 @@ function nullShapeErr(fn) {
 * Run `fn` on fresh handles to the distinct sub-shapes of `type`, releasing them
 * afterwards. Unlike getFaces and friends this leaves the shape's topology cache
 * alone, so a measurement allocates nothing that outlives it.
+*
+* @internal
 */
 function withSubShapes(shape, type, fn) {
 	const kernel = getKernel();
@@ -40,7 +42,11 @@ function withSubShapes(shape, type, fn) {
 		for (const item of items) kernel.dispose(item);
 	}
 }
-/** Run `fn` on a throwaway compound of `parts`, releasing the compound afterwards. */
+/**
+* Run `fn` on a throwaway compound of `parts`, releasing the compound afterwards.
+*
+* @internal
+*/
 function withCompoundOf(parts, fn) {
 	const kernel = getKernel();
 	const c = kernel.makeCompound(parts);
@@ -141,9 +147,9 @@ function measureSurfaceProps(shape) {
 /**
 * Measure linear properties of any shape.
 *
-* For edges this is the arc length; for wires and faces it is the total length
-* of their edges; for shells, solids, and compounds it is the total length of
-* their distinct edges, each counted once.
+* For edges this is the arc length; for wires it is the total length of their
+* edges; for faces, shells, solids, and compounds it is the total length of
+* their distinct edges, each counted once (a face's seam edge included).
 *
 * @param shape - Any shape whose linear extent is to be measured.
 * @returns `Result` containing length, center of mass, and raw mass property.
@@ -164,7 +170,7 @@ function measureLinearProps(shape) {
 		};
 	};
 	let result;
-	if (type === "vertex" || type === "edge" || type === "wire" || type === "face") result = linearOf(shape.wrapped);
+	if (type === "vertex" || type === "edge" || type === "wire") result = linearOf(shape.wrapped);
 	else result = withSubShapes(shape, "edge", (edges) => edges.length === 0 ? {
 		mass: 0,
 		length: 0,
@@ -289,4 +295,4 @@ function measureCurvatureAtMid(face) {
 		minDirection: result.minDirection
 	});
 }
-export { measureDistance as a, measureLinearProps as c, measureVolumeProps as d, getCachedMeasurement as f, measureCurvatureAtMid as i, measureSurfaceProps as l, measureArea as n, measureDistanceProps as o, setCachedMeasurement as p, measureCurvatureAt as r, measureLength as s, createDistanceQuery as t, measureVolume as u };
+export { measureDistance as a, measureLinearProps as c, measureVolumeProps as d, withCompoundOf as f, setCachedMeasurement as h, measureCurvatureAtMid as i, measureSurfaceProps as l, getCachedMeasurement as m, measureArea as n, measureDistanceProps as o, withSubShapes as p, measureCurvatureAt as r, measureLength as s, createDistanceQuery as t, measureVolume as u };

package/dist/{measureFns-JNQma34N.cjs → measureFns-D8uSDn-8.cjs}

@@ -1,7 +1,7 @@
-const require_shapeTypes = require("./shapeTypes-B9ACN7a8.cjs");
+const require_shapeTypes = require("./shapeTypes-C06KHgTm.cjs");
 const require_errors = require("./errors-O_blYTWT.cjs");
-const require_topologyQueryFns = require("./topologyQueryFns-DEax1nqt.cjs");
-const require_faceFns = require("./faceFns-mca5oNNe.cjs");
+const require_topologyQueryFns = require("./topologyQueryFns-BUhKY2Kj.cjs");
+const require_faceFns = require("./faceFns-Jo9hMVqL.cjs");
 // src/measurement/measureCache.ts
 var cache = /* @__PURE__ */ new WeakMap();
 function getCachedMeasurement(shape, key) {
@@ -30,6 +30,8 @@ function nullShapeErr(fn) {
 * Run `fn` on fresh handles to the distinct sub-shapes of `type`, releasing them
 * afterwards. Unlike getFaces and friends this leaves the shape's topology cache
 * alone, so a measurement allocates nothing that outlives it.
+*
+* @internal
 */
 function withSubShapes(shape, type, fn) {
 	const kernel = require_shapeTypes.getKernel();
@@ -40,7 +42,11 @@ function withSubShapes(shape, type, fn) {
 		for (const item of items) kernel.dispose(item);
 	}
 }
-/** Run `fn` on a throwaway compound of `parts`, releasing the compound afterwards. */
+/**
+* Run `fn` on a throwaway compound of `parts`, releasing the compound afterwards.
+*
+* @internal
+*/
 function withCompoundOf(parts, fn) {
 	const kernel = require_shapeTypes.getKernel();
 	const c = kernel.makeCompound(parts);
@@ -141,9 +147,9 @@ function measureSurfaceProps(shape) {
 /**
 * Measure linear properties of any shape.
 *
-* For edges this is the arc length; for wires and faces it is the total length
-* of their edges; for shells, solids, and compounds it is the total length of
-* their distinct edges, each counted once.
+* For edges this is the arc length; for wires it is the total length of their
+* edges; for faces, shells, solids, and compounds it is the total length of
+* their distinct edges, each counted once (a face's seam edge included).
 *
 * @param shape - Any shape whose linear extent is to be measured.
 * @returns `Result` containing length, center of mass, and raw mass property.
@@ -164,7 +170,7 @@ function measureLinearProps(shape) {
 		};
 	};
 	let result;
-	if (type === "vertex" || type === "edge" || type === "wire" || type === "face") result = linearOf(shape.wrapped);
+	if (type === "vertex" || type === "edge" || type === "wire") result = linearOf(shape.wrapped);
 	else result = withSubShapes(shape, "edge", (edges) => edges.length === 0 ? {
 		mass: 0,
 		length: 0,
@@ -367,3 +373,15 @@ Object.defineProperty(exports, "setCachedMeasurement", {
 		return setCachedMeasurement;
 	}
 });
+Object.defineProperty(exports, "withCompoundOf", {
+	enumerable: true,
+	get: function() {
+		return withCompoundOf;
+	}
+});
+Object.defineProperty(exports, "withSubShapes", {
+	enumerable: true,
+	get: function() {
+		return withSubShapes;
+	}
+});

package/dist/measurement/measureFns.d.ts

@@ -1,8 +1,23 @@
+import { KernelShape, ShapeType } from '../kernel/types.js';
 import { AnyShape, Dimension, Face, OrientedFace, Shape3D } from '../core/shapeTypes.js';
 import { Result } from '../core/result.js';
 import { CurvatureResult } from '../kernel/occt/measureOps.js';
 import { PhysicalProps, VolumeProps, SurfaceProps, LinearProps, DistanceProps } from './measureTypes.js';
 export type { PhysicalProps, VolumeProps, SurfaceProps, LinearProps, DistanceProps };
+/**
+ * Run `fn` on fresh handles to the distinct sub-shapes of `type`, releasing them
+ * afterwards. Unlike getFaces and friends this leaves the shape's topology cache
+ * alone, so a measurement allocates nothing that outlives it.
+ *
+ * @internal
+ */
+export declare function withSubShapes<R>(shape: AnyShape<Dimension>, type: ShapeType, fn: (items: KernelShape[]) => R): R;
+/**
+ * Run `fn` on a throwaway compound of `parts`, releasing the compound afterwards.
+ *
+ * @internal
+ */
+export declare function withCompoundOf<R>(parts: KernelShape[], fn: (c: KernelShape) => R): R;
 /**
  * Measure volume properties of a 3D shape.
  *
@@ -22,9 +37,9 @@ export declare function measureSurfaceProps(shape: Face<Dimension> | Shape3D): R
 /**
  * Measure linear properties of any shape.
  *
- * For edges this is the arc length; for wires and faces it is the total length
- * of their edges; for shells, solids, and compounds it is the total length of
- * their distinct edges, each counted once.
+ * For edges this is the arc length; for wires it is the total length of their
+ * edges; for faces, shells, solids, and compounds it is the total length of
+ * their distinct edges, each counted once (a face's seam edge included).
  *
  * @param shape - Any shape whose linear extent is to be measured.
  * @returns `Result` containing length, center of mass, and raw mass property.

package/dist/measurement/principalBoxFns.d.ts

@@ -16,7 +16,8 @@ export type { PrincipalBoundingBox };
  * Z reports 136.6 x 136.6 x 2, because any in-plane pair of axes is principal
  * for a square plate.
  *
- * @param shape - A solid, compsolid, or compound containing solids.
+ * @param shape - A solid, compsolid, or compound containing solids. A compound
+ *   is measured by its solids alone: loose faces, shells, or wires in it are ignored.
  * @returns `Result` with the box center in world coordinates, orthonormal
  *   right-handed axes ordered by decreasing extent, and the full edge lengths
  *   along those axes. Fails with `NOT_A_SOLID` for any other shape type

package/dist/measurement.cjs

@@ -1,6 +1,6 @@
 Object.defineProperty(exports, Symbol.toStringTag, { value: "Module" });
-const require_measureFns = require("./measureFns-JNQma34N.cjs");
-const require_principalBoxFns = require("./principalBoxFns-D_SbLz4g.cjs");
+const require_measureFns = require("./measureFns-D8uSDn-8.cjs");
+const require_principalBoxFns = require("./principalBoxFns-Cozj46sS.cjs");
 exports.createDistanceQuery = require_measureFns.createDistanceQuery;
 exports.measureArea = require_measureFns.measureArea;
 exports.measureDistance = require_measureFns.measureDistance;

package/dist/measurement.js

@@ -1,3 +1,3 @@
-import { a as measureDistance, c as measureLinearProps, d as measureVolumeProps, l as measureSurfaceProps, n as measureArea, o as measureDistanceProps, s as measureLength, t as createDistanceQuery, u as measureVolume } from "./measureFns-DmL9FRQC.js";
-import { t as principalBoundingBox } from "./principalBoxFns-wy3yRjqt.js";
+import { a as measureDistance, c as measureLinearProps, d as measureVolumeProps, l as measureSurfaceProps, n as measureArea, o as measureDistanceProps, s as measureLength, t as createDistanceQuery, u as measureVolume } from "./measureFns--UKrACtx.js";
+import { t as principalBoundingBox } from "./principalBoxFns-C3SQMyG5.js";
 export { createDistanceQuery, measureArea, measureDistance, measureDistanceProps, measureLength, measureLinearProps, measureSurfaceProps, measureVolume, measureVolumeProps, principalBoundingBox };

package/dist/{meshFns-CqLLizwL.js → meshFns-Bo4EQJFO.js}

@@ -1,8 +1,8 @@
-import { q as getKernel, ut as qualityDeflection } from "./shapeTypes-Ccp9iVna.js";
-import { j as isUnsupportedKernelOperationError } from "./occtWasmAdapter-Dr70YU4m.js";
+import { q as getKernel, ut as qualityDeflection } from "./shapeTypes-DoPnZHn_.js";
+import { j as isUnsupportedKernelOperationError } from "./occtWasmAdapter-C-Qi-jxS.js";
 import { E as ok, g as err, r as ioError, t as BrepErrorCode, u as unsupportedError } from "./errors-BTccWbtE.js";
-import { d as getSolids, n as getBounds } from "./topologyQueryFns-D7j1fl0n.js";
-import { d as getFaceOrigins } from "./solidBuilders-BltNQKqZ.js";
+import { d as getSolids, n as getBounds } from "./topologyQueryFns-yOGEI9hO.js";
+import { d as getFaceOrigins } from "./solidBuilders-ZDGdvaTU.js";
 // src/topology/meshCache.ts
 /**
 * Build a parameter key for the inner cache map (excludes shape identity).

package/dist/{meshFns-CsMwXvw3.cjs → meshFns-Cs_qrlXI.cjs}

@@ -1,8 +1,8 @@
-const require_shapeTypes = require("./shapeTypes-B9ACN7a8.cjs");
-const require_occtWasmAdapter = require("./occtWasmAdapter-DTEpwXuT.cjs");
+const require_shapeTypes = require("./shapeTypes-C06KHgTm.cjs");
+const require_occtWasmAdapter = require("./occtWasmAdapter-BK--kx4R.cjs");
 const require_errors = require("./errors-O_blYTWT.cjs");
-const require_topologyQueryFns = require("./topologyQueryFns-DEax1nqt.cjs");
-const require_solidBuilders = require("./solidBuilders-DwqlsNW1.cjs");
+const require_topologyQueryFns = require("./topologyQueryFns-BUhKY2Kj.cjs");
+const require_solidBuilders = require("./solidBuilders-Dwm0hXn5.cjs");
 // src/topology/meshCache.ts
 /**
 * Build a parameter key for the inner cache map (excludes shape identity).

package/dist/{occtWasmAdapter-DTEpwXuT.cjs → occtWasmAdapter-BK--kx4R.cjs}

@@ -2350,6 +2350,9 @@ function draftAnglesRad(faces, angleDeg) {
 function needsOcctWasm59(what) {
 	return new UnsupportedKernelOperationError(`occt-wasm: ${what} requires occt-wasm >= 5.9.0`);
 }
+function needsOcctWasm510(what) {
+	return new UnsupportedKernelOperationError(`occt-wasm: ${what} requires occt-wasm >= 5.10.0`);
+}
 /**
 * Rotate a shape from the kernel's default Z-axis to an arbitrary direction.
 * Used by primitives whose creation API only takes a Z-aligned form.
@@ -4601,6 +4604,17 @@ var MM_PER_UNIT = {
 	uin: 254e-7,
 	microinch: 254e-7
 };
+var STEP_SCHEMAS = {
+	203: "AP203",
+	214: "AP214",
+	242: "AP242"
+};
+function stepSchemaName(schema) {
+	if (schema === void 0) return "";
+	const name = STEP_SCHEMAS[schema];
+	if (name === void 0) throw new Error(`occt-wasm: unknown STEP schema ${schema} (expected 203, 214, or 242)`);
+	return name;
+}
 function mmPerUnit(unit) {
 	const mm = MM_PER_UNIT[unit.toLowerCase()];
 	if (mm === void 0) throw new Error(`occt-wasm: unknown STEP length unit '${unit}'`);
@@ -4616,14 +4630,17 @@ function resolveStepUnits(options) {
 	const write = options?.unit ?? options?.modelUnit ?? "mm";
 	return {
 		write,
-		modelScale: mmPerUnit(options?.modelUnit ?? write)
+		modelScale: mmPerUnit(options?.modelUnit ?? write),
+		schema: stepSchemaName(options?.schema)
 	};
 }
-/**
-* The writer for `units`: the 5.9 unit-aware one, else the millimeter-only
-* one when the file is in millimeters anyway.
-*/
-function stepWriter(withUnit, inMillimeters, units) {
+/** The newest writer `units` needs, else an error naming the occt-wasm release that has it. */
+function stepWriter(writers, units) {
+	const { withOptions, withUnit, inMillimeters } = writers;
+	if (units.schema) {
+		if (!withOptions) throw needsOcctWasm510(`STEP export as ${units.schema}`);
+		return (id) => withOptions(id, units.write, units.schema);
+	}
 	if (withUnit) return (id) => withUnit(id, units.write);
 	if (mmPerUnit(units.write) === 1) return inMillimeters;
 	throw needsOcctWasm59(`STEP export in '${units.write}'`);
@@ -4640,7 +4657,11 @@ function withScaled(k, id, factor, use) {
 }
 /** One STEP file holding every shape (as a compound when there are several). */
 function writeStepShapes(k, makeCompound, shapes, units) {
-	const write = stepWriter(k.exportStepWithUnit?.bind(k), (id) => k.exportStep(id), units);
+	const write = stepWriter({
+		withOptions: k.exportStepWithOptions?.bind(k),
+		withUnit: k.exportStepWithUnit?.bind(k),
+		inMillimeters: (id) => k.exportStep(id)
+	}, units);
 	if (shapes.length === 1) return withScaled(k, unwrap(shapes[0]), units.modelScale, write);
 	const compoundId = unwrap(makeCompound(shapes));
 	try {
@@ -4834,7 +4855,11 @@ function writeXcafDoc(k, docId, units) {
 	} finally {
 		roots.delete();
 	}
-	return stepWriter(k.xcafExportSTEPWithUnit?.bind(k), (id) => k.xcafExportSTEP(id), units)(docId);
+	return stepWriter({
+		withOptions: k.xcafExportSTEPWithOptions?.bind(k),
+		withUnit: k.xcafExportSTEPWithUnit?.bind(k),
+		inMillimeters: (id) => k.xcafExportSTEP(id)
+	}, units)(docId);
 }
 /** Write `parts` as one XCAF STEP file, scaling each into millimeters first if needed. */
 function writeXcafParts(k, parts, units) {

package/dist/{occtWasmAdapter-Dr70YU4m.js → occtWasmAdapter-C-Qi-jxS.js}

@@ -2350,6 +2350,9 @@ function draftAnglesRad(faces, angleDeg) {
 function needsOcctWasm59(what) {
 	return new UnsupportedKernelOperationError(`occt-wasm: ${what} requires occt-wasm >= 5.9.0`);
 }
+function needsOcctWasm510(what) {
+	return new UnsupportedKernelOperationError(`occt-wasm: ${what} requires occt-wasm >= 5.10.0`);
+}
 /**
 * Rotate a shape from the kernel's default Z-axis to an arbitrary direction.
 * Used by primitives whose creation API only takes a Z-aligned form.
@@ -4601,6 +4604,17 @@ var MM_PER_UNIT = {
 	uin: 254e-7,
 	microinch: 254e-7
 };
+var STEP_SCHEMAS = {
+	203: "AP203",
+	214: "AP214",
+	242: "AP242"
+};
+function stepSchemaName(schema) {
+	if (schema === void 0) return "";
+	const name = STEP_SCHEMAS[schema];
+	if (name === void 0) throw new Error(`occt-wasm: unknown STEP schema ${schema} (expected 203, 214, or 242)`);
+	return name;
+}
 function mmPerUnit(unit) {
 	const mm = MM_PER_UNIT[unit.toLowerCase()];
 	if (mm === void 0) throw new Error(`occt-wasm: unknown STEP length unit '${unit}'`);
@@ -4616,14 +4630,17 @@ function resolveStepUnits(options) {
 	const write = options?.unit ?? options?.modelUnit ?? "mm";
 	return {
 		write,
-		modelScale: mmPerUnit(options?.modelUnit ?? write)
+		modelScale: mmPerUnit(options?.modelUnit ?? write),
+		schema: stepSchemaName(options?.schema)
 	};
 }
-/**
-* The writer for `units`: the 5.9 unit-aware one, else the millimeter-only
-* one when the file is in millimeters anyway.
-*/
-function stepWriter(withUnit, inMillimeters, units) {
+/** The newest writer `units` needs, else an error naming the occt-wasm release that has it. */
+function stepWriter(writers, units) {
+	const { withOptions, withUnit, inMillimeters } = writers;
+	if (units.schema) {
+		if (!withOptions) throw needsOcctWasm510(`STEP export as ${units.schema}`);
+		return (id) => withOptions(id, units.write, units.schema);
+	}
 	if (withUnit) return (id) => withUnit(id, units.write);
 	if (mmPerUnit(units.write) === 1) return inMillimeters;
 	throw needsOcctWasm59(`STEP export in '${units.write}'`);
@@ -4640,7 +4657,11 @@ function withScaled(k, id, factor, use) {
 }
 /** One STEP file holding every shape (as a compound when there are several). */
 function writeStepShapes(k, makeCompound, shapes, units) {
-	const write = stepWriter(k.exportStepWithUnit?.bind(k), (id) => k.exportStep(id), units);
+	const write = stepWriter({
+		withOptions: k.exportStepWithOptions?.bind(k),
+		withUnit: k.exportStepWithUnit?.bind(k),
+		inMillimeters: (id) => k.exportStep(id)
+	}, units);
 	if (shapes.length === 1) return withScaled(k, unwrap(shapes[0]), units.modelScale, write);
 	const compoundId = unwrap(makeCompound(shapes));
 	try {
@@ -4834,7 +4855,11 @@ function writeXcafDoc(k, docId, units) {
 	} finally {
 		roots.delete();
 	}
-	return stepWriter(k.xcafExportSTEPWithUnit?.bind(k), (id) => k.xcafExportSTEP(id), units)(docId);
+	return stepWriter({
+		withOptions: k.xcafExportSTEPWithOptions?.bind(k),
+		withUnit: k.xcafExportSTEPWithUnit?.bind(k),
+		inMillimeters: (id) => k.xcafExportSTEP(id)
+	}, units)(docId);
 }
 /** Write `parts` as one XCAF STEP file, scaling each into millimeters first if needed. */
 function writeXcafParts(k, parts, units) {

package/dist/operations.cjs

@@ -1,6 +1,6 @@
 Object.defineProperty(exports, Symbol.toStringTag, { value: "Module" });
-const require_threadFns = require("./threadFns-ChWU9CVV.cjs");
-const require_loftFns = require("./loftFns-Udobz6tm.cjs");
+const require_threadFns = require("./threadFns-Dq_Gff0C.cjs");
+const require_loftFns = require("./loftFns-CnerVgTM.cjs");
 exports.addChild = require_threadFns.addChild;
 exports.addJoint = require_threadFns.addJoint;
 exports.addStep = require_threadFns.addStep;

package/dist/operations.js

@@ -1,3 +1,3 @@
-import { A as setJointValue, B as walkAssembly, C as cylindricalJoint, D as planarJoint, E as mechanismDOF, F as countNodes, H as circularPattern, I as createAssemblyNode, L as findNode, M as sphericalJoint, N as addChild, O as prismaticJoint, P as collectShapes, R as removeChild, S as addJoint, T as jointTransform, U as gridPattern, V as exportAssemblySTEP, W as linearPattern, Y as createAssembly, _ as exportURDF, b as inverseKinematics, c as modifyStep, d as replayFrom, f as replayHistory, g as undoLast, h as stepsFrom, i as createRegistry, j as setJointValues, k as revoluteJoint, l as registerOperation, m as stepCount, n as addStep, o as findStep, r as createHistory, s as getShape, t as thread, u as registerShape, v as importURDF, w as forwardKinematics, x as jointTrajectory, y as jointsFromDH, z as updateNode } from "./threadFns-B9uxy9ud.js";
-import { c as twistExtrude, o as supportExtrude, r as complexExtrude, s as sweep } from "./loftFns-DE21800M.js";
+import { A as setJointValue, B as walkAssembly, C as cylindricalJoint, D as planarJoint, E as mechanismDOF, F as countNodes, H as circularPattern, I as createAssemblyNode, L as findNode, M as sphericalJoint, N as addChild, O as prismaticJoint, P as collectShapes, R as removeChild, S as addJoint, T as jointTransform, U as gridPattern, V as exportAssemblySTEP, W as linearPattern, Y as createAssembly, _ as exportURDF, b as inverseKinematics, c as modifyStep, d as replayFrom, f as replayHistory, g as undoLast, h as stepsFrom, i as createRegistry, j as setJointValues, k as revoluteJoint, l as registerOperation, m as stepCount, n as addStep, o as findStep, r as createHistory, s as getShape, t as thread, u as registerShape, v as importURDF, w as forwardKinematics, x as jointTrajectory, y as jointsFromDH, z as updateNode } from "./threadFns-D7D_qR7t.js";
+import { c as twistExtrude, o as supportExtrude, r as complexExtrude, s as sweep } from "./loftFns-jnQL_zpD.js";
 export { addChild, addJoint, addStep, circularPattern, collectShapes, complexExtrude, countNodes, createAssembly, createAssemblyNode, createHistory, createRegistry, cylindricalJoint, exportAssemblySTEP, exportURDF, findNode, findStep, forwardKinematics, getShape as getHistoryShape, gridPattern, importURDF, inverseKinematics, jointTrajectory, jointTransform, jointsFromDH, linearPattern, mechanismDOF, modifyStep, planarJoint, prismaticJoint, registerOperation, registerShape, removeChild, replayFrom, replayHistory, revoluteJoint, setJointValue, setJointValues, sphericalJoint, stepCount, stepsFrom, supportExtrude, sweep, thread, twistExtrude, undoLast, updateNode, walkAssembly };

package/dist/{primitiveFns-CE8IsnCc.cjs → primitiveFns-CZqSRhm8.cjs}

@@ -1,11 +1,11 @@
-const require_shapeTypes = require("./shapeTypes-B9ACN7a8.cjs");
+const require_shapeTypes = require("./shapeTypes-C06KHgTm.cjs");
 const require_errors = require("./errors-O_blYTWT.cjs");
-const require_validityTypes = require("./validityTypes-BolqrAZa.cjs");
+const require_validityTypes = require("./validityTypes-lfyOkCQm.cjs");
 const require_constants = require("./constants-oee0S_x6.cjs");
 const require_vecOps = require("./vecOps-CrGEPPQM.cjs");
-const require_solidBuilders = require("./solidBuilders-DwqlsNW1.cjs");
-const require_booleanFns = require("./booleanFns-CJFWBMrz.cjs");
-const require_surfaceBuilders = require("./surfaceBuilders-CYuQfMQj.cjs");
+const require_solidBuilders = require("./solidBuilders-Dwm0hXn5.cjs");
+const require_booleanFns = require("./booleanFns-CkcJ8WB7.cjs");
+const require_surfaceBuilders = require("./surfaceBuilders-D5kFAV1i.cjs");
 // src/topology/transformFns.ts
 /**
 * Immutable shape transforms — translate, rotate, scale, mirror, applyMatrix.

package/dist/{primitiveFns-DnzKWigX.js → primitiveFns-DPqHA3sX.js}

@@ -1,11 +1,11 @@
-import { E as GeometryCleanupError, G as _usingCtx, d as createSolid, n as castResultShape, q as getKernel } from "./shapeTypes-Ccp9iVna.js";
+import { E as GeometryCleanupError, G as _usingCtx, d as createSolid, n as castResultShape, q as getKernel } from "./shapeTypes-DoPnZHn_.js";
 import { E as ok, d as validationError, g as err, m as andThen, t as BrepErrorCode } from "./errors-BTccWbtE.js";
-import { n as isClosedWire } from "./validityTypes-6AePqp-3.js";
+import { n as isClosedWire } from "./validityTypes-CGrEOscY.js";
 import { n as HASH_CODE_MAX, t as DEG2RAD } from "./constants-iraOnb2p.js";
 import { d as vecNormalize, h as vecScale } from "./vecOps-S-m9H_fe.js";
-import { a as makeOffset, c as makeTorus, i as makeEllipsoid, l as makeVertex, n as makeCone, o as makeSolid, r as makeCylinder, s as makeSphere, t as makeCompound, u as weldShellsAndFaces } from "./solidBuilders-BltNQKqZ.js";
-import { d as collectInputFaceHashes, f as hasAnyMetadata, h as propagateMetadataThroughRelocation, m as propagateMetadataByHash, p as propagateAllMetadata } from "./booleanFns-BfHFIGG2.js";
-import { _ as makeThreePointArc, a as makeNonPlanarFace, c as makeBSplineApproximation, d as makeCircle, f as makeEllipse, g as makeTangentArc, h as makeLine, i as makeNewFaceWithinFace, m as makeHelix, o as makePolygon, p as makeEllipseArc, r as makeFace, s as assembleWire, t as addHolesInFace, u as makeBezierCurve } from "./surfaceBuilders-CiNyRrC4.js";
+import { a as makeOffset, c as makeTorus, i as makeEllipsoid, l as makeVertex, n as makeCone, o as makeSolid, r as makeCylinder, s as makeSphere, t as makeCompound, u as weldShellsAndFaces } from "./solidBuilders-ZDGdvaTU.js";
+import { f as collectInputFaceHashes, g as propagateMetadataThroughRelocation, h as propagateMetadataByHash, m as propagateAllMetadata, p as hasAnyMetadata } from "./booleanFns-B9RvEpHB.js";
+import { _ as makeThreePointArc, a as makeNonPlanarFace, c as makeBSplineApproximation, d as makeCircle, f as makeEllipse, g as makeTangentArc, h as makeLine, i as makeNewFaceWithinFace, m as makeHelix, o as makePolygon, p as makeEllipseArc, r as makeFace, s as assembleWire, t as addHolesInFace, u as makeBezierCurve } from "./surfaceBuilders-BBs6D6Km.js";
 // src/topology/transformFns.ts
 /**
 * Immutable shape transforms — translate, rotate, scale, mirror, applyMatrix.