brepjs 20.11.3 → 20.12.0

package/dist/brepjs.cjs

@@ -24,18 +24,18 @@ const require_threadFns = require("./threadFns-BzxB-0i5.cjs");
 const require_blueprintSketcher = require("./blueprintSketcher-CG4H8A6M.cjs");
 const require_helpers = require("./helpers-GZyqAK5c.cjs");
 const require_blueprint = require("./blueprint-CHBjfXQO.cjs");
-const require_drawFns = require("./drawFns-CccVnQU5.cjs");
+const require_drawFns = require("./drawFns-C_YnK4Ar.cjs");
 const require_measureFns = require("./measureFns-Cyjpl2Kl.cjs");
 const require_cornerFinder = require("./cornerFinder-Bg67ivza.cjs");
 const require_boolean2D = require("./boolean2D-DjJogOY-.cjs");
 const require_blueprintFns = require("./blueprintFns-DOdzDcPX.cjs");
 const require_importFns = require("./importFns-C3LbWc6X.cjs");
-const require_textBlueprints = require("./textBlueprints-BRr35eaP.cjs");
+const require_textBlueprints = require("./textBlueprints-C38JfUeN.cjs");
 const require_loftFns = require("./loftFns-BsFinbgs.cjs");
 const require_refResolveFns = require("./refResolveFns-awGNYa3x.cjs");
 const require_adjacencyFns = require("./adjacencyFns-Cibtcqdl.cjs");
 const require_cameraFns = require("./cameraFns-CUX8VNKT.cjs");
-const require_textMetrics = require("./textMetrics-DwMUM6GY.cjs");
+const require_textMetrics = require("./textMetrics-r9ldmBb5.cjs");
 const require_principalBoxFns = require("./principalBoxFns-uZrBoGLA.cjs");
 const require_workerPool = require("./workerPool-D5tiNXrI.cjs");
 // src/kernel/types.ts
@@ -9831,6 +9831,7 @@ exports.sdfTorus = torus;
 exports.section = section;
 exports.sectionToFace = sectionToFace;
 exports.serializeHistory = require_threadFns.serializeHistory;
+exports.setFallbackFont = require_textBlueprints.setFallbackFont;
 exports.setJointValue = require_threadFns.setJointValue;
 exports.setJointValues = require_threadFns.setJointValues;
 exports.setShapeOrigin = require_originTrackingFns.setShapeOrigin;

package/dist/brepjs.js

@@ -22,18 +22,18 @@ import { A as setJointValue, B as walkAssembly, C as cylindricalJoint, D as plan
 import { n as BaseSketcher2d, r as organiseBlueprints, t as BlueprintSketcher } from "./blueprintSketcher-CQPC4SEF.js";
 import { a as createTypedFinder, i as wireFinder, n as edgeFinder, r as faceFinder, t as getSingleFace } from "./helpers-CBXclBes.js";
 import { _ as approximateAsSvgCompatibleCurve, o as ellipseArcFlags } from "./blueprint-CN5dNZ1h.js";
-import { A as sketchEllipse, D as makeBaseBox, E as deserializeDrawing, F as sketchRectangle, I as sketchRoundedRectangle, L as FaceSketcher, M as sketchHelix, N as sketchParametricFunction, O as polysideInnerRadius, P as sketchPolysides, R as Sketcher, S as drawText, _ as drawPolysides, a as drawingIntersect, b as drawSingleCircle, c as rotateDrawing, d as drawFaceOutline, f as drawProjection, g as drawPointsInterpolation, h as drawParametricFunction, i as drawingFuse, j as sketchFaceOffset, k as sketchCircle, l as scaleDrawing, m as drawEllipse, n as drawingCut, o as drawingToSketchOnPlane, p as drawCircle, r as drawingFillet, s as mirrorDrawing, t as drawingChamfer, u as translateDrawing, v as drawRectangle, w as draw, x as drawSingleEllipse, y as drawRoundedRectangle } from "./drawFns-OR6Hjs8g.js";
+import { A as sketchEllipse, D as makeBaseBox, E as deserializeDrawing, F as sketchRectangle, I as sketchRoundedRectangle, L as FaceSketcher, M as sketchHelix, N as sketchParametricFunction, O as polysideInnerRadius, P as sketchPolysides, R as Sketcher, S as drawText, _ as drawPolysides, a as drawingIntersect, b as drawSingleCircle, c as rotateDrawing, d as drawFaceOutline, f as drawProjection, g as drawPointsInterpolation, h as drawParametricFunction, i as drawingFuse, j as sketchFaceOffset, k as sketchCircle, l as scaleDrawing, m as drawEllipse, n as drawingCut, o as drawingToSketchOnPlane, p as drawCircle, r as drawingFillet, s as mirrorDrawing, t as drawingChamfer, u as translateDrawing, v as drawRectangle, w as draw, x as drawSingleEllipse, y as drawRoundedRectangle } from "./drawFns-D6YK0JbH.js";
 import { a as measureDistance, c as measureLinearProps, d as measureVolumeProps, i as measureCurvatureAtMid, l as measureSurfaceProps, n as measureArea, o as measureDistanceProps, r as measureCurvatureAt, s as measureLength, t as createDistanceQuery, u as measureVolume } from "./measureFns-DukwjzUl.js";
 import { t as cornerFinder } from "./cornerFinder-utEooGH7.js";
 import { a as fuseBlueprints, c as roundedRectangleBlueprint, i as cutBlueprints, n as fuse2D, o as intersectBlueprints, r as intersect2D, s as polysidesBlueprint, t as cut2D } from "./boolean2D-tR_2N_Vy.js";
 import { S as reverseCurve, _ as curve2dIsOnCurve, a as isInside2D, b as curve2dSplitAt, c as scale2D, d as stretch2D, f as toSVGPathD, g as curve2dFirstPoint, h as curve2dDistanceFrom, i as getOrientation2D, l as sketchOnFace2D, m as curve2dBoundingBox, n as createCompoundBlueprint, o as mirror2D, p as translate2D, r as getBounds2D, s as rotate2D, t as createBlueprint, u as sketchOnPlane2D, v as curve2dLastPoint, x as curve2dTangentAt, y as curve2dParameter } from "./blueprintFns--26Mr3Lm.js";
 import { a as importSVG, c as blueprintToDXF, d as exportGltf, f as exportOBJ, i as exportSTEPConfigured, l as exportDXF, n as importSTEP, o as importSVGPathD, r as importSTL, s as exportThreeMF, t as importIGES, u as exportGlb } from "./importFns-CcPhunG6.js";
-import { a as Sketch, b as extrudeAll, c as compoundSketchLoft, d as sketchFace, f as sketchLoft, h as sketchWires, i as Sketches, l as compoundSketchRevolve, m as sketchSweep, n as getFont, o as compoundSketchExtrude, p as sketchRevolve, r as loadFont, s as compoundSketchFace, t as textBlueprints, u as sketchExtrude, v as CompoundSketch, x as revolve$2, y as extrude$2 } from "./textBlueprints-BxoVq7Fr.js";
+import { S as revolve$2, a as Sketches, b as extrude$2, c as compoundSketchFace, d as sketchExtrude, f as sketchFace, g as sketchWires, h as sketchSweep, i as setFallbackFont, l as compoundSketchLoft, m as sketchRevolve, n as getFont, o as Sketch, p as sketchLoft, r as loadFont, s as compoundSketchExtrude, t as textBlueprints, u as compoundSketchRevolve, x as extrudeAll, y as CompoundSketch } from "./textBlueprints-TLU7rjuN.js";
 import { a as multiSectionSweep, c as twistExtrude, i as guidedSweep, n as loftAll, o as supportExtrude, r as complexExtrude, s as sweep$1, t as loft$2 } from "./loftFns-pMh0ET-J.js";
 import { _ as createRef, a as isVertexRef, b as defaultScorer, c as resolveRefParams, d as createVertexRef, f as resolveVertexRef, g as captureHint, h as assignRoles, i as isLineageRef, l as createDerivedFaceRef, m as resolveEdgeRef, n as isEdgeRef, o as resolveLineageRef, p as createEdgeRef, r as isFaceRef, s as resolveRefIn, t as isDerivedFaceRef, u as resolveDerivedFaceRef, v as resolveRef, y as updateRoles } from "./refResolveFns-BvQkLKLw.js";
 import { a as facesOfVertex, c as verticesOfFace, i as facesOfEdge, l as wiresOfFace, n as adjacentFaces, o as sharedEdges, r as edgesOfFace, s as verticesOfEdge } from "./adjacencyFns-C0YD3Zrp.js";
 import { a as makeProjectedEdges, i as projectEdges, n as cameraLookAt, r as createCamera, s as isProjectionPlane, t as cameraFromPlane } from "./cameraFns-xUCRxpsa.js";
-import { n as textMetrics, r as sketchText, t as fontMetrics } from "./textMetrics-DaNriztv.js";
+import { n as textMetrics, r as sketchText, t as fontMetrics } from "./textMetrics-CEnX8GBe.js";
 import { t as principalBoundingBox } from "./principalBoxFns-ClynMQMo.js";
 import { _ as isSuccessResponse, a as createWorkerClient, c as enqueueTask, d as rejectAll, f as isBatchRequest, g as isOperationRequest, h as isInitRequest, i as registerHandler, l as isEmpty$1, m as isErrorResponse, n as createOperationRegistry, o as createTaskQueue, p as isDisposeRequest, r as createWorkerHandler, s as dequeueTask, t as createWorkerPool, u as pendingCount } from "./workerPool-Bc5hmJc4.js";
 // \0rolldown/runtime.js
@@ -9303,4 +9303,4 @@ var csg_exports = /* @__PURE__ */ __exportAll({
 	zShapeProfile: () => zShapeProfile
 });
 /* v8 ignore file */
-export { BaseSketcher2d, BlueprintSketcher, BrepBugError, BrepErrorCode, BrepWrapperError, BrepkitAdapter, CompoundSketch, DEFAULT_CAPABILITIES, DEG2RAD, DisposalScope, EXACT_BREP_CAPABILITIES, FaceSketcher, GeometryCleanupError, HASH_CODE_MAX, OK, OcctWasmAdapter, RAD2DEG, Sketch, Sketcher, Sketches, addChild, addHoles, addJoint, addMate, addStep, adjacentFaces, all, andThen, applyGlue, applyMatrix, approximateCurve, as2D, as3D, asTopo, assignRoles, autoHeal, bezier, blueprintToContour, blueprintToDXF, booleanPipeline, booleans_exports as booleans, boss, box, bsplineApprox, bug, cameraFromPlane, cameraLookAt, captureHint, cast, castShape, castShape3D, chamfer, chamferDistAngle as chamferDistAngleShape, chamferWithEvolution, checkAllInterferences, checkBoolean, checkInterference, circle, circularPattern, classifyPointOnFace, clearMeshCache, clone, closedWire, collect, collectShapes, colorFaces, colorShape, complexExtrude, composeTransforms, compound, compoundSketchExtrude, compoundSketchFace, compoundSketchLoft, compoundSketchRevolve, computationError, computeStraightSkeleton, cone, construction_exports as construction, convexHull, cornerFinder, countNodes, createAssembly, createAssemblyNode, createBlueprint, createCamera, createCompound, createCompoundBlueprint, createDerivedFaceRef, createDistanceQuery, createEdge, createEdgeRef, createFace, createHandle, createHistory, createKernelHandle, createMeshCache, createNamedPlane, createOperationRegistry, createPlane, createRef, createRegistry, createShell, createSolid, createTaskQueue, createVertex, createVertexRef, createWire, createWorkerClient, createWorkerHandler, createWorkerPool, csg_exports as csg, currentQuality, curve2dBoundingBox, curve2dDistanceFrom, curve2dFirstPoint, curve2dIsOnCurve, curve2dLastPoint, curve2dParameter, curve2dSplitAt, curve2dTangentAt, curveAxis, curveEndPoint, curveIsClosed, curveIsPeriodic, curveLength, curvePeriod, curvePointAt, curveStartPoint, curveTangentAt, cut, cut2D, cutAll, cutAllBisect, cutBlueprints, cutWithEvolution, cylinder, cylindricalJoint, defaultScorer, dequeueTask, describe, deserializeDrawing, deserializeHistory, fromBREP as deserializeShape, downcast, draft, draw, drawCircle, drawEllipse, drawFaceOutline, drawParametricFunction, drawPointsInterpolation, drawPolysides, drawProjection, drawRectangle, drawRoundedRectangle, drawSingleCircle, drawSingleEllipse, drawText, drawingChamfer, drawingCut, drawingFillet, drawingFuse, drawingIntersect, drawingToSketchOnPlane, drill, edgeFinder, edgesOfFace, ellipse, ellipseArc, ellipsoid, enqueueTask, err, exportAssemblySTEP, exportDXF, exportGlb, exportGltf, exportIGES, exportOBJ, exportSTEP, exportSTEPConfigured, exportSTL, exportThreeMF, exportURDF, extrude, extrudeAll, face, faceAxis, faceCenter, faceFinder, faceGeomType, faceOrientation, facesOfEdge, facesOfVertex, fieldBoolean, fieldContour, fieldOffset, fieldReinit, fieldShell, fill, filledFace, fillet, filletWithEvolution, findFacesByTag, findNode, findStep, fixSelfIntersection, fixShape, flatMap, flatten, flipFaceOrientation, flipOrientation, fontMetrics, forwardKinematics, fromBREP$1 as fromBREP, fromKernelDir, fromKernelPnt, fromKernelVec, fromNullable, fuse, fuse2D, fuseAll, fuseAllBisect, fuseBlueprints, fuseWithEvolution, gearGeometry, getActiveVoxelId, getBounds, getBounds2D, getCompSolids, getCurveType, getDisposalStats, getEdges, getFaceColor, getFaceOrigins, getFaceTags, getFaces, getFont, getHashCode, getShape as getHistoryShape, getKernel, getKernelCapabilities, getKernelTier, getNurbsCurveData, getNurbsSurfaceData, getOrientation, getOrientation2D, getPerformanceStats, getShapeColor, getShapeKind, getShells, getSingleFace, getSolids, getSurfaceType, getTagMetadata, getVertices, getVoxel, getWires, gridPattern, guidedSweep, heal, healFace, healSolid, healWire, helix, hull, importDXF, importGLB, importIGES, importOBJ, importSTEP, importSTL, importSVG, importSVGPathD, importThreeMF, importURDF, init, initFromManifold, initFromOC, initVoxel, innerWires, instance, instanceCount, instanceGrid, instancedMesh, interpolateCurve, intersect, intersect2D, intersectBlueprints, intersectWithEvolution, invalidateShapeCache, inverseKinematics, ioNs_exports as io, ioError, is2D, is3D, isBatchRequest, isChamferRadius, isClosedWire, isCompSolid, isCompound, isDerivedFaceRef, isDisposeRequest, isEdge, isEdgeRef, isEmpty, isEqualShape, isErr, isErrorResponse, isFace, isFaceRef, isFilletRadius, isInitRequest, isInside2D, isInstanced, isLineageRef, isLive, isManifoldShell, isNumber, isOk, isOperationRequest, isOrientedFace, isPlanarFace, isPlanarWire, isProjectionPlane, isEmpty$1 as isQueueEmpty, isSameShape, isShape1D, isShape3D, isShell, isSolid, isSuccessResponse, isValid, isValidSolid, isVertex, isVertexRef, isWire, iterCompSolids, iterEdges, iterFaces, iterShells, iterSolids, iterTopo, iterVertices, iterWires, jointTrajectory, jointTransform, jointsFromDH, kernelCall, kernelCallRaw, kernelCallScoped, kernelError, latticeInfill, latticeInfillShape, line, linearPattern, loadFont, locate, loft, loftAll, makeBaseBox, makeExternalGear, makeInternalGear, makePlane, makePlanetaryGear, makeProjectedEdges, manifoldShell, map, mapBoth, mapErr, match, materialize, measureArea, measureCurvatureAt, measureCurvatureAtMid, measureDistance, measureDistanceProps, measureLength, measureLinearProps, measureSurfaceProps, measureVolume, measureVolumeProps, measurement_exports as measurement, mechanismDOF, mesh, meshEdges, meshLODs, meshLODsProgressive, meshMultiLOD, minkowski, mirror, mirror2D, mirrorDrawing, mirrorJoin, modifiers_exports as modifiers, modifyStep, moduleInitError, multiSectionSweep, normalAt, offset, offsetFace, offsetMesh, offsetShape, offsetWire2D, ok, or, orElse, organiseBlueprints, orientedFace, outerWire, patterns_exports as patterns, pendingCount, pipeline, pivotPlane, planarFace, planarJoint, planarWire, planetPlacements, pocket, pointOnSurface, pointsInside, polygon, polyhedron, polysideInnerRadius, polysidesBlueprint, positionOnCurve, prewarm, primitives_exports as primitives, principalBoundingBox, prismaticJoint, projectEdges, projectPointOnFace, query_exports as query, queryError, rectangularPattern, registerHandler, registerKernel, registerKernelTier, registerOperation, registerShape, registerVoxel, rejectAll, removeChild, removeFaces, removeHolesFromFace, repairMesh, replayFrom, replayHistory, resetDisposalStats, resetPerformanceStats, resize, resolve, resolve3D, resolveDerivedFaceRef, resolveDirection, resolveEdgeRef, resolveLineageRef, resolvePlane, resolveRef, resolveRefIn, resolveRefParams, resolveVertexRef, reverseCurve, revoluteJoint, revolve, roof, rotate, rotate2D, rotateDrawing, roundedRectangleBlueprint, scale, scale2D, scaleDrawing, box$1 as sdfBox, capsule as sdfCapsule, cone$1 as sdfCone, cylinder$1 as sdfCylinder, fieldAxialRamp as sdfFieldAxialRamp, fieldClamp as sdfFieldClamp, fieldConst as sdfFieldConst, fieldFromSdf as sdfFieldFromSdf, fieldRadialRamp as sdfFieldRadialRamp, lattice as sdfLattice, plane as sdfPlane, roundedBox as sdfRoundedBox, sphere as sdfSphere, strutLattice as sdfStrutLattice, sweep as sdfSweep, torus as sdfTorus, section, sectionToFace, serializeHistory, setJointValue, setJointValues, setShapeOrigin, setTagMetadata, sewShells, shape, shapeToMeshInput, shapeType, sharedEdges, shell, shellMesh, shellShape, shellWithEvolution, simplify, sketchCircle, sketchEllipse, sketchExtrude, sketchFace, sketchFaceOffset, sketchHelix, sketchLoft, sketchOnFace2D, sketchOnPlane2D, sketchParametricFunction, sketchPolysides, sketchRectangle, sketchRevolve, sketchRoundedRectangle, sketchSweep, sketchText, sketchWires, sketcherStateError, slice, solid, solidFromShell, solveAssembly, sphere$1 as sphere, sphericalJoint, split, stepCount, stepsFrom, stretch2D, subFace, supportExtrude, supportsConstraintSketch, supportsProjection, surfaceFromGrid, surfaceFromImage, sweep$1 as sweep, tagFaces, tangentArc, tap, tapErr, textBlueprints, textMetrics, thicken, thread, threePointArc, toBREP, toBufferGeometryData, toGroupedBufferGeometryData, toKernelVec, toLODGeometryData, toLODGeometryLevels, toLineGeometryData, toSVGPathD, toVec2, toVec3, torus$1 as torus, tpmsLattice, transformCopy, transforms_exports as transforms, translate, translate2D, translateDrawing, translatePlane, tryCatch, tryCatchAsync, twistExtrude, typeCastError, undoLast, unsupportedError, unwrap, unwrapErr, unwrapOr, unwrapOrElse, updateNode, updateRoles, uvBounds, uvCoordinates, validSolid, validatePlanetary, validationError, variableFillet, vecAdd, vecAngle, vecCross, vecDistance, vecDot, vecEquals, vecIsZero, vecLength, vecLengthSq, vecNegate, vecNormalize, vecProjectToPlane, vecRepr, vecRotate, vecScale, vecSub, vertex, vertexFinder, vertexPosition, verticesOfEdge, verticesOfFace, voxelBoolean, voxelBooleanField, voxelBooleanFieldShapes, voxelBooleanShapes, voxelField, voxelFieldFromShape, walkAssembly, windingNumbers, wire, wireFinder, wireLoop, wiresOfFace, withKernel, withKernelDir, withKernelPnt, withKernelVec, withQuality, withScope, withScopeResult, withScopeResultAsync, withTier, zip as zipResults };
+export { BaseSketcher2d, BlueprintSketcher, BrepBugError, BrepErrorCode, BrepWrapperError, BrepkitAdapter, CompoundSketch, DEFAULT_CAPABILITIES, DEG2RAD, DisposalScope, EXACT_BREP_CAPABILITIES, FaceSketcher, GeometryCleanupError, HASH_CODE_MAX, OK, OcctWasmAdapter, RAD2DEG, Sketch, Sketcher, Sketches, addChild, addHoles, addJoint, addMate, addStep, adjacentFaces, all, andThen, applyGlue, applyMatrix, approximateCurve, as2D, as3D, asTopo, assignRoles, autoHeal, bezier, blueprintToContour, blueprintToDXF, booleanPipeline, booleans_exports as booleans, boss, box, bsplineApprox, bug, cameraFromPlane, cameraLookAt, captureHint, cast, castShape, castShape3D, chamfer, chamferDistAngle as chamferDistAngleShape, chamferWithEvolution, checkAllInterferences, checkBoolean, checkInterference, circle, circularPattern, classifyPointOnFace, clearMeshCache, clone, closedWire, collect, collectShapes, colorFaces, colorShape, complexExtrude, composeTransforms, compound, compoundSketchExtrude, compoundSketchFace, compoundSketchLoft, compoundSketchRevolve, computationError, computeStraightSkeleton, cone, construction_exports as construction, convexHull, cornerFinder, countNodes, createAssembly, createAssemblyNode, createBlueprint, createCamera, createCompound, createCompoundBlueprint, createDerivedFaceRef, createDistanceQuery, createEdge, createEdgeRef, createFace, createHandle, createHistory, createKernelHandle, createMeshCache, createNamedPlane, createOperationRegistry, createPlane, createRef, createRegistry, createShell, createSolid, createTaskQueue, createVertex, createVertexRef, createWire, createWorkerClient, createWorkerHandler, createWorkerPool, csg_exports as csg, currentQuality, curve2dBoundingBox, curve2dDistanceFrom, curve2dFirstPoint, curve2dIsOnCurve, curve2dLastPoint, curve2dParameter, curve2dSplitAt, curve2dTangentAt, curveAxis, curveEndPoint, curveIsClosed, curveIsPeriodic, curveLength, curvePeriod, curvePointAt, curveStartPoint, curveTangentAt, cut, cut2D, cutAll, cutAllBisect, cutBlueprints, cutWithEvolution, cylinder, cylindricalJoint, defaultScorer, dequeueTask, describe, deserializeDrawing, deserializeHistory, fromBREP as deserializeShape, downcast, draft, draw, drawCircle, drawEllipse, drawFaceOutline, drawParametricFunction, drawPointsInterpolation, drawPolysides, drawProjection, drawRectangle, drawRoundedRectangle, drawSingleCircle, drawSingleEllipse, drawText, drawingChamfer, drawingCut, drawingFillet, drawingFuse, drawingIntersect, drawingToSketchOnPlane, drill, edgeFinder, edgesOfFace, ellipse, ellipseArc, ellipsoid, enqueueTask, err, exportAssemblySTEP, exportDXF, exportGlb, exportGltf, exportIGES, exportOBJ, exportSTEP, exportSTEPConfigured, exportSTL, exportThreeMF, exportURDF, extrude, extrudeAll, face, faceAxis, faceCenter, faceFinder, faceGeomType, faceOrientation, facesOfEdge, facesOfVertex, fieldBoolean, fieldContour, fieldOffset, fieldReinit, fieldShell, fill, filledFace, fillet, filletWithEvolution, findFacesByTag, findNode, findStep, fixSelfIntersection, fixShape, flatMap, flatten, flipFaceOrientation, flipOrientation, fontMetrics, forwardKinematics, fromBREP$1 as fromBREP, fromKernelDir, fromKernelPnt, fromKernelVec, fromNullable, fuse, fuse2D, fuseAll, fuseAllBisect, fuseBlueprints, fuseWithEvolution, gearGeometry, getActiveVoxelId, getBounds, getBounds2D, getCompSolids, getCurveType, getDisposalStats, getEdges, getFaceColor, getFaceOrigins, getFaceTags, getFaces, getFont, getHashCode, getShape as getHistoryShape, getKernel, getKernelCapabilities, getKernelTier, getNurbsCurveData, getNurbsSurfaceData, getOrientation, getOrientation2D, getPerformanceStats, getShapeColor, getShapeKind, getShells, getSingleFace, getSolids, getSurfaceType, getTagMetadata, getVertices, getVoxel, getWires, gridPattern, guidedSweep, heal, healFace, healSolid, healWire, helix, hull, importDXF, importGLB, importIGES, importOBJ, importSTEP, importSTL, importSVG, importSVGPathD, importThreeMF, importURDF, init, initFromManifold, initFromOC, initVoxel, innerWires, instance, instanceCount, instanceGrid, instancedMesh, interpolateCurve, intersect, intersect2D, intersectBlueprints, intersectWithEvolution, invalidateShapeCache, inverseKinematics, ioNs_exports as io, ioError, is2D, is3D, isBatchRequest, isChamferRadius, isClosedWire, isCompSolid, isCompound, isDerivedFaceRef, isDisposeRequest, isEdge, isEdgeRef, isEmpty, isEqualShape, isErr, isErrorResponse, isFace, isFaceRef, isFilletRadius, isInitRequest, isInside2D, isInstanced, isLineageRef, isLive, isManifoldShell, isNumber, isOk, isOperationRequest, isOrientedFace, isPlanarFace, isPlanarWire, isProjectionPlane, isEmpty$1 as isQueueEmpty, isSameShape, isShape1D, isShape3D, isShell, isSolid, isSuccessResponse, isValid, isValidSolid, isVertex, isVertexRef, isWire, iterCompSolids, iterEdges, iterFaces, iterShells, iterSolids, iterTopo, iterVertices, iterWires, jointTrajectory, jointTransform, jointsFromDH, kernelCall, kernelCallRaw, kernelCallScoped, kernelError, latticeInfill, latticeInfillShape, line, linearPattern, loadFont, locate, loft, loftAll, makeBaseBox, makeExternalGear, makeInternalGear, makePlane, makePlanetaryGear, makeProjectedEdges, manifoldShell, map, mapBoth, mapErr, match, materialize, measureArea, measureCurvatureAt, measureCurvatureAtMid, measureDistance, measureDistanceProps, measureLength, measureLinearProps, measureSurfaceProps, measureVolume, measureVolumeProps, measurement_exports as measurement, mechanismDOF, mesh, meshEdges, meshLODs, meshLODsProgressive, meshMultiLOD, minkowski, mirror, mirror2D, mirrorDrawing, mirrorJoin, modifiers_exports as modifiers, modifyStep, moduleInitError, multiSectionSweep, normalAt, offset, offsetFace, offsetMesh, offsetShape, offsetWire2D, ok, or, orElse, organiseBlueprints, orientedFace, outerWire, patterns_exports as patterns, pendingCount, pipeline, pivotPlane, planarFace, planarJoint, planarWire, planetPlacements, pocket, pointOnSurface, pointsInside, polygon, polyhedron, polysideInnerRadius, polysidesBlueprint, positionOnCurve, prewarm, primitives_exports as primitives, principalBoundingBox, prismaticJoint, projectEdges, projectPointOnFace, query_exports as query, queryError, rectangularPattern, registerHandler, registerKernel, registerKernelTier, registerOperation, registerShape, registerVoxel, rejectAll, removeChild, removeFaces, removeHolesFromFace, repairMesh, replayFrom, replayHistory, resetDisposalStats, resetPerformanceStats, resize, resolve, resolve3D, resolveDerivedFaceRef, resolveDirection, resolveEdgeRef, resolveLineageRef, resolvePlane, resolveRef, resolveRefIn, resolveRefParams, resolveVertexRef, reverseCurve, revoluteJoint, revolve, roof, rotate, rotate2D, rotateDrawing, roundedRectangleBlueprint, scale, scale2D, scaleDrawing, box$1 as sdfBox, capsule as sdfCapsule, cone$1 as sdfCone, cylinder$1 as sdfCylinder, fieldAxialRamp as sdfFieldAxialRamp, fieldClamp as sdfFieldClamp, fieldConst as sdfFieldConst, fieldFromSdf as sdfFieldFromSdf, fieldRadialRamp as sdfFieldRadialRamp, lattice as sdfLattice, plane as sdfPlane, roundedBox as sdfRoundedBox, sphere as sdfSphere, strutLattice as sdfStrutLattice, sweep as sdfSweep, torus as sdfTorus, section, sectionToFace, serializeHistory, setFallbackFont, setJointValue, setJointValues, setShapeOrigin, setTagMetadata, sewShells, shape, shapeToMeshInput, shapeType, sharedEdges, shell, shellMesh, shellShape, shellWithEvolution, simplify, sketchCircle, sketchEllipse, sketchExtrude, sketchFace, sketchFaceOffset, sketchHelix, sketchLoft, sketchOnFace2D, sketchOnPlane2D, sketchParametricFunction, sketchPolysides, sketchRectangle, sketchRevolve, sketchRoundedRectangle, sketchSweep, sketchText, sketchWires, sketcherStateError, slice, solid, solidFromShell, solveAssembly, sphere$1 as sphere, sphericalJoint, split, stepCount, stepsFrom, stretch2D, subFace, supportExtrude, supportsConstraintSketch, supportsProjection, surfaceFromGrid, surfaceFromImage, sweep$1 as sweep, tagFaces, tangentArc, tap, tapErr, textBlueprints, textMetrics, thicken, thread, threePointArc, toBREP, toBufferGeometryData, toGroupedBufferGeometryData, toKernelVec, toLODGeometryData, toLODGeometryLevels, toLineGeometryData, toSVGPathD, toVec2, toVec3, torus$1 as torus, tpmsLattice, transformCopy, transforms_exports as transforms, translate, translate2D, translateDrawing, translatePlane, tryCatch, tryCatchAsync, twistExtrude, typeCastError, undoLast, unsupportedError, unwrap, unwrapErr, unwrapOr, unwrapOrElse, updateNode, updateRoles, uvBounds, uvCoordinates, validSolid, validatePlanetary, validationError, variableFillet, vecAdd, vecAngle, vecCross, vecDistance, vecDot, vecEquals, vecIsZero, vecLength, vecLengthSq, vecNegate, vecNormalize, vecProjectToPlane, vecRepr, vecRotate, vecScale, vecSub, vertex, vertexFinder, vertexPosition, verticesOfEdge, verticesOfFace, voxelBoolean, voxelBooleanField, voxelBooleanFieldShapes, voxelBooleanShapes, voxelField, voxelFieldFromShape, walkAssembly, windingNumbers, wire, wireFinder, wireLoop, wiresOfFace, withKernel, withKernelDir, withKernelPnt, withKernelVec, withQuality, withScope, withScopeResult, withScopeResultAsync, withTier, zip as zipResults };

package/dist/{drawFns-CccVnQU5.cjs → drawFns-C_YnK4Ar.cjs}

@@ -15,7 +15,7 @@ const require_helpers = require("./helpers-GZyqAK5c.cjs");
 const require_blueprint = require("./blueprint-CHBjfXQO.cjs");
 const require_cornerFinder = require("./cornerFinder-Bg67ivza.cjs");
 const require_boolean2D = require("./boolean2D-DjJogOY-.cjs");
-const require_textBlueprints = require("./textBlueprints-BRr35eaP.cjs");
+const require_textBlueprints = require("./textBlueprints-C38JfUeN.cjs");
 const require_cameraFns = require("./cameraFns-CUX8VNKT.cjs");
 // src/2d/lib/stitching.ts
 /**

package/dist/{drawFns-OR6Hjs8g.js → drawFns-D6YK0JbH.js}

@@ -15,7 +15,7 @@ import { b as squareDistance2d, l as add2d, s as PRECISION_OFFSET, v as samePoin
 import { _ as approximateAsSvgCompatibleCurve, a as edgeToCurve, f as make2dInerpolatedBSplineCurve, i as curvesAsEdgesOnPlane, l as make2dCircle, p as make2dSegmentCurve, s as make2dArcFromCenter, t as Blueprint, u as make2dEllipse, v as Curve2D, x as BoundingBox2d, y as deserializeCurve2D } from "./blueprint-CN5dNZ1h.js";
 import { t as cornerFinder } from "./cornerFinder-utEooGH7.js";
 import { c as roundedRectangleBlueprint, n as fuse2D, r as intersect2D, s as polysidesBlueprint, t as cut2D } from "./boolean2D-tR_2N_Vy.js";
-import { _ as wrapSketchDataArray, a as Sketch, g as wrapSketchData, i as Sketches, t as textBlueprints } from "./textBlueprints-BxoVq7Fr.js";
+import { _ as wrapSketchData, a as Sketches, o as Sketch, t as textBlueprints, v as wrapSketchDataArray } from "./textBlueprints-TLU7rjuN.js";
 import { i as projectEdges, t as cameraFromPlane } from "./cameraFns-xUCRxpsa.js";
 // src/2d/lib/stitching.ts
 /**

package/dist/index.d.ts

@@ -66,7 +66,7 @@ export { drawProjection, drawFaceOutline } from './sketching/draw3d.js';
 export type { DrawingInterface, SketchData } from './2d/blueprints/lib.js';
 export { sketchExtrude, sketchRevolve, sketchLoft, sketchSweep, sketchFace, sketchWires, compoundSketchExtrude, compoundSketchRevolve, compoundSketchFace, compoundSketchLoft, } from './sketching/sketchFns.js';
 export { drawingToSketchOnPlane, drawingFuse, drawingCut, drawingIntersect, drawingFillet, drawingChamfer, translateDrawing, rotateDrawing, scaleDrawing, mirrorDrawing, } from './sketching/drawFns.js';
-export { loadFont, getFont } from './text/fontRegistry.js';
+export { loadFont, getFont, setFallbackFont } from './text/fontRegistry.js';
 export { textBlueprints } from './text/textBlueprints.js';
 export { sketchText } from './text/sketchText.js';
 export { textMetrics, fontMetrics, type TextMetricsResult, type FontMetricsResult, } from './text/textMetrics.js';

package/dist/sketching.cjs

@@ -1,7 +1,7 @@
 Object.defineProperty(exports, Symbol.toStringTag, { value: "Module" });
 const require_blueprintSketcher = require("./blueprintSketcher-CG4H8A6M.cjs");
-const require_drawFns = require("./drawFns-CccVnQU5.cjs");
-const require_textBlueprints = require("./textBlueprints-BRr35eaP.cjs");
+const require_drawFns = require("./drawFns-C_YnK4Ar.cjs");
+const require_textBlueprints = require("./textBlueprints-C38JfUeN.cjs");
 // src/sketching.ts
 /**
 * brepjs/sketching — Sketcher, Drawing, and sketch-to-shape operations.

package/dist/sketching.js

@@ -1,6 +1,6 @@
 import { n as BaseSketcher2d, t as BlueprintSketcher } from "./blueprintSketcher-CQPC4SEF.js";
-import { A as sketchEllipse, C as DrawingPen, D as makeBaseBox, E as deserializeDrawing, F as sketchRectangle, I as sketchRoundedRectangle, L as FaceSketcher, M as sketchHelix, N as sketchParametricFunction, O as polysideInnerRadius, P as sketchPolysides, R as Sketcher, S as drawText, T as Drawing, _ as drawPolysides, a as drawingIntersect, b as drawSingleCircle, c as rotateDrawing, d as drawFaceOutline, f as drawProjection, g as drawPointsInterpolation, h as drawParametricFunction, i as drawingFuse, j as sketchFaceOffset, k as sketchCircle, l as scaleDrawing, m as drawEllipse, n as drawingCut, o as drawingToSketchOnPlane, p as drawCircle, r as drawingFillet, s as mirrorDrawing, t as drawingChamfer, u as translateDrawing, v as drawRectangle, w as draw, x as drawSingleEllipse, y as drawRoundedRectangle } from "./drawFns-OR6Hjs8g.js";
-import { a as Sketch, c as compoundSketchLoft, d as sketchFace, f as sketchLoft, h as sketchWires, i as Sketches, l as compoundSketchRevolve, m as sketchSweep, o as compoundSketchExtrude, p as sketchRevolve, s as compoundSketchFace, u as sketchExtrude, v as CompoundSketch } from "./textBlueprints-BxoVq7Fr.js";
+import { A as sketchEllipse, C as DrawingPen, D as makeBaseBox, E as deserializeDrawing, F as sketchRectangle, I as sketchRoundedRectangle, L as FaceSketcher, M as sketchHelix, N as sketchParametricFunction, O as polysideInnerRadius, P as sketchPolysides, R as Sketcher, S as drawText, T as Drawing, _ as drawPolysides, a as drawingIntersect, b as drawSingleCircle, c as rotateDrawing, d as drawFaceOutline, f as drawProjection, g as drawPointsInterpolation, h as drawParametricFunction, i as drawingFuse, j as sketchFaceOffset, k as sketchCircle, l as scaleDrawing, m as drawEllipse, n as drawingCut, o as drawingToSketchOnPlane, p as drawCircle, r as drawingFillet, s as mirrorDrawing, t as drawingChamfer, u as translateDrawing, v as drawRectangle, w as draw, x as drawSingleEllipse, y as drawRoundedRectangle } from "./drawFns-D6YK0JbH.js";
+import { a as Sketches, c as compoundSketchFace, d as sketchExtrude, f as sketchFace, g as sketchWires, h as sketchSweep, l as compoundSketchLoft, m as sketchRevolve, o as Sketch, p as sketchLoft, s as compoundSketchExtrude, u as compoundSketchRevolve, y as CompoundSketch } from "./textBlueprints-TLU7rjuN.js";
 // src/sketching.ts
 /**
 * brepjs/sketching — Sketcher, Drawing, and sketch-to-shape operations.

package/dist/text/fontRegistry.d.ts

@@ -13,10 +13,21 @@ import { OpenTypeFont } from '../kernel/occt/wasmTypes/externals.js';
  * @returns The parsed opentype.js Font object.
  */
 export declare function loadFont(fontPath: string | ArrayBuffer, fontFamily?: string, force?: boolean): Promise<Result<OpenTypeFont>>;
+/**
+ * Register a font that text functions use when no font has been loaded.
+ *
+ * Unlike {@link loadFont}, this does not occupy the `'default'` family: once any font is
+ * loaded, it takes precedence over the fallback.
+ *
+ * @param fontData - Raw OpenType/TrueType font bytes.
+ * @returns The parsed opentype.js Font object.
+ */
+export declare function setFallbackFont(fontData: ArrayBuffer): Result<OpenTypeFont>;
 /**
  * Retrieve a previously loaded font by family name.
  *
  * @param fontFamily - Registry key (defaults to `'default'`).
- * @returns The opentype.js Font object, or `undefined` if not loaded.
+ * @returns The opentype.js Font object, or `undefined` if not loaded. `'default'` resolves
+ * to the fallback font when no font has been loaded.
  */
 export declare const getFont: (fontFamily?: string) => OpenTypeFont | undefined;

package/dist/text.cjs

@@ -1,9 +1,10 @@
 Object.defineProperty(exports, Symbol.toStringTag, { value: "Module" });
-const require_textBlueprints = require("./textBlueprints-BRr35eaP.cjs");
-const require_textMetrics = require("./textMetrics-DwMUM6GY.cjs");
+const require_textBlueprints = require("./textBlueprints-C38JfUeN.cjs");
+const require_textMetrics = require("./textMetrics-r9ldmBb5.cjs");
 exports.fontMetrics = require_textMetrics.fontMetrics;
 exports.getFont = require_textBlueprints.getFont;
 exports.loadFont = require_textBlueprints.loadFont;
+exports.setFallbackFont = require_textBlueprints.setFallbackFont;
 exports.sketchText = require_textMetrics.sketchText;
 exports.textBlueprints = require_textBlueprints.textBlueprints;
 exports.textMetrics = require_textMetrics.textMetrics;

package/dist/text.d.ts

@@ -6,7 +6,7 @@
  * import { loadFont, sketchText } from 'brepjs/text';
  * ```
  */
-export { loadFont, getFont } from './text/fontRegistry.js';
+export { loadFont, getFont, setFallbackFont } from './text/fontRegistry.js';
 export { textBlueprints } from './text/textBlueprints.js';
 export { sketchText } from './text/sketchText.js';
 export { textMetrics, fontMetrics, type TextMetricsResult, type FontMetricsResult, } from './text/textMetrics.js';

package/dist/text.js

@@ -1,3 +1,3 @@
-import { n as getFont, r as loadFont, t as textBlueprints } from "./textBlueprints-BxoVq7Fr.js";
-import { n as textMetrics, r as sketchText, t as fontMetrics } from "./textMetrics-DaNriztv.js";
-export { fontMetrics, getFont, loadFont, sketchText, textBlueprints, textMetrics };
+import { i as setFallbackFont, n as getFont, r as loadFont, t as textBlueprints } from "./textBlueprints-TLU7rjuN.js";
+import { n as textMetrics, r as sketchText, t as fontMetrics } from "./textMetrics-CEnX8GBe.js";
+export { fontMetrics, getFont, loadFont, setFallbackFont, sketchText, textBlueprints, textMetrics };

package/dist/{textBlueprints-BRr35eaP.cjs → textBlueprints-C38JfUeN.cjs}

@@ -824,25 +824,43 @@ async function loadFont(fontPath, fontFamily = "default", force = false) {
 		if (!response.ok) return require_errors.err(require_errors.ioError(require_errors.BrepErrorCode.FONT_FETCH_FAILED, `Failed to fetch font from ${fontPath}: HTTP ${response.status} ${response.statusText}`));
 		fontData = await response.arrayBuffer();
 	} else fontData = fontPath;
-	let font;
+	const parsed = parseFont(fontData);
+	if (!parsed.ok) return parsed;
+	FONT_REGISTER[fontFamily] = parsed.value;
+	if (!FONT_REGISTER["default"]) FONT_REGISTER["default"] = parsed.value;
+	return parsed;
+}
+function parseFont(fontData) {
 	try {
-		font = opentype_js.default.parse(fontData);
+		return require_errors.ok(opentype_js.default.parse(fontData));
 	} catch (e) {
 		return require_errors.err(require_errors.ioError(require_errors.BrepErrorCode.FONT_PARSE_FAILED, `Failed to parse font data: ${e instanceof Error ? e.message : String(e)}`, e));
 	}
-	const typedFont = font;
-	FONT_REGISTER[fontFamily] = typedFont;
-	if (!FONT_REGISTER["default"]) FONT_REGISTER["default"] = typedFont;
-	return require_errors.ok(typedFont);
+}
+var fallbackFont;
+/**
+* Register a font that text functions use when no font has been loaded.
+*
+* Unlike {@link loadFont}, this does not occupy the `'default'` family: once any font is
+* loaded, it takes precedence over the fallback.
+*
+* @param fontData - Raw OpenType/TrueType font bytes.
+* @returns The parsed opentype.js Font object.
+*/
+function setFallbackFont(fontData) {
+	const parsed = parseFont(fontData);
+	if (parsed.ok) fallbackFont = parsed.value;
+	return parsed;
 }
 /**
 * Retrieve a previously loaded font by family name.
 *
 * @param fontFamily - Registry key (defaults to `'default'`).
-* @returns The opentype.js Font object, or `undefined` if not loaded.
+* @returns The opentype.js Font object, or `undefined` if not loaded. `'default'` resolves
+* to the fallback font when no font has been loaded.
 */
 var getFont = (fontFamily = "default") => {
-	return FONT_REGISTER[fontFamily];
+	return FONT_REGISTER[fontFamily] ?? (fontFamily === "default" ? fallbackFont : void 0);
 };
 // src/text/textBlueprints.ts
 var sketchFontCommands = function* (commands) {
@@ -960,6 +978,12 @@ Object.defineProperty(exports, "revolve", {
 		return revolve;
 	}
 });
+Object.defineProperty(exports, "setFallbackFont", {
+	enumerable: true,
+	get: function() {
+		return setFallbackFont;
+	}
+});
 Object.defineProperty(exports, "sketchExtrude", {
 	enumerable: true,
 	get: function() {

package/dist/{textBlueprints-BxoVq7Fr.js → textBlueprints-TLU7rjuN.js}

@@ -822,25 +822,43 @@ async function loadFont(fontPath, fontFamily = "default", force = false) {
 		if (!response.ok) return err(ioError(BrepErrorCode.FONT_FETCH_FAILED, `Failed to fetch font from ${fontPath}: HTTP ${response.status} ${response.statusText}`));
 		fontData = await response.arrayBuffer();
 	} else fontData = fontPath;
-	let font;
+	const parsed = parseFont(fontData);
+	if (!parsed.ok) return parsed;
+	FONT_REGISTER[fontFamily] = parsed.value;
+	if (!FONT_REGISTER["default"]) FONT_REGISTER["default"] = parsed.value;
+	return parsed;
+}
+function parseFont(fontData) {
 	try {
-		font = opentype.parse(fontData);
+		return ok(opentype.parse(fontData));
 	} catch (e) {
 		return err(ioError(BrepErrorCode.FONT_PARSE_FAILED, `Failed to parse font data: ${e instanceof Error ? e.message : String(e)}`, e));
 	}
-	const typedFont = font;
-	FONT_REGISTER[fontFamily] = typedFont;
-	if (!FONT_REGISTER["default"]) FONT_REGISTER["default"] = typedFont;
-	return ok(typedFont);
+}
+var fallbackFont;
+/**
+* Register a font that text functions use when no font has been loaded.
+*
+* Unlike {@link loadFont}, this does not occupy the `'default'` family: once any font is
+* loaded, it takes precedence over the fallback.
+*
+* @param fontData - Raw OpenType/TrueType font bytes.
+* @returns The parsed opentype.js Font object.
+*/
+function setFallbackFont(fontData) {
+	const parsed = parseFont(fontData);
+	if (parsed.ok) fallbackFont = parsed.value;
+	return parsed;
 }
 /**
 * Retrieve a previously loaded font by family name.
 *
 * @param fontFamily - Registry key (defaults to `'default'`).
-* @returns The opentype.js Font object, or `undefined` if not loaded.
+* @returns The opentype.js Font object, or `undefined` if not loaded. `'default'` resolves
+* to the fallback font when no font has been loaded.
 */
 var getFont = (fontFamily = "default") => {
-	return FONT_REGISTER[fontFamily];
+	return FONT_REGISTER[fontFamily] ?? (fontFamily === "default" ? fallbackFont : void 0);
 };
 // src/text/textBlueprints.ts
 var sketchFontCommands = function* (commands) {
@@ -886,4 +904,4 @@ function textBlueprints(text, { startX = 0, startY = 0, fontSize = 16, fontFamil
 	const blueprints = Array.from(sketchFontCommands(writtenText.commands));
 	return organiseBlueprints(blueprints).mirror([0, 0]);
 }
-export { wrapSketchDataArray as _, Sketch as a, extrudeAll as b, compoundSketchLoft as c, sketchFace as d, sketchLoft as f, wrapSketchData as g, sketchWires as h, Sketches as i, compoundSketchRevolve as l, sketchSweep as m, getFont as n, compoundSketchExtrude as o, sketchRevolve as p, loadFont as r, compoundSketchFace as s, textBlueprints as t, sketchExtrude as u, CompoundSketch as v, revolve as x, extrude as y };
+export { revolve as S, wrapSketchData as _, Sketches as a, extrude as b, compoundSketchFace as c, sketchExtrude as d, sketchFace as f, sketchWires as g, sketchSweep as h, setFallbackFont as i, compoundSketchLoft as l, sketchRevolve as m, getFont as n, Sketch as o, sketchLoft as p, loadFont as r, compoundSketchExtrude as s, textBlueprints as t, compoundSketchRevolve as u, wrapSketchDataArray as v, extrudeAll as x, CompoundSketch as y };

package/dist/{textMetrics-DaNriztv.js → textMetrics-CEnX8GBe.js}

@@ -1,5 +1,5 @@
 import { E as ok, d as validationError, g as err, t as BrepErrorCode } from "./errors-BTccWbtE.js";
-import { g as wrapSketchData, i as Sketches, n as getFont, t as textBlueprints, v as CompoundSketch } from "./textBlueprints-BxoVq7Fr.js";
+import { _ as wrapSketchData, a as Sketches, n as getFont, t as textBlueprints, y as CompoundSketch } from "./textBlueprints-TLU7rjuN.js";
 // src/text/sketchText.ts
 /**
 * Render text as 3D sketch outlines on a plane.

package/dist/{textMetrics-DwMUM6GY.cjs → textMetrics-r9ldmBb5.cjs}

@@ -1,5 +1,5 @@
 const require_errors = require("./errors-O_blYTWT.cjs");
-const require_textBlueprints = require("./textBlueprints-BRr35eaP.cjs");
+const require_textBlueprints = require("./textBlueprints-C38JfUeN.cjs");
 // src/text/sketchText.ts
 /**
 * Render text as 3D sketch outlines on a plane.

package/package.json

@@ -1,6 +1,6 @@
 {
   "name": "brepjs",
-  "version": "20.11.3",
+  "version": "20.12.0",
   "description": "Web CAD library with pluggable geometry kernel",
   "keywords": [
     "cad",