brepjs 18.99.5 → 18.100.1

package/dist/brepjs.js

@@ -1,36 +1,36 @@
-import { $ as getKernelCapabilities, A as planarWire, B as createKernelHandle, C as isOrientedFace, D as manifoldShell, E as isValidSolid, F as as3D, H as isLive, I as is2D, J as withScopeResultAsync, K as withScope, L as is3D, M as getShapeKind, O as orientedFace, P as as2D, R as DisposalScope, S as isManifoldShell, T as isPlanarWire, V as getDisposalStats, W as resetDisposalStats, X as getActiveKernelId, Y as _usingCtx, Z as getKernel, _ as isSolid, a as createEdge, at as registerKernel, b as closedWire, c as createSolid, ct as withQuality, d as isCompound, dt as supportsProjection, et as getKernelTier, f as isEdge, ft as BrepkitAdapter, g as isShell, h as isShape3D, ht as currentQuality, i as createCompound, it as prewarm, j as validSolid, k as planarFace, l as createVertex, lt as withTier, m as isShape1D, mt as resetPerformanceStats, n as castShape3D, nt as initFromManifold, o as createFace, ot as registerKernelTier, p as isFace, pt as getPerformanceStats, q as withScopeResult, rt as initFromOC, s as createShell, st as withKernel, t as castShape, tt as init, u as createWire, ut as supportsConstraintSketch, v as isVertex, w as isPlanarFace, x as isClosedWire, y as isWire, z as createHandle } from "./shapeTypes-BIcALNFv.js";
+import { $ as getKernelCapabilities, A as planarWire, B as createKernelHandle, C as isOrientedFace, D as manifoldShell, E as isValidSolid, F as as3D, H as isLive, I as is2D, J as withScopeResultAsync, K as withScope, L as is3D, M as getShapeKind, O as orientedFace, P as as2D, R as DisposalScope, S as isManifoldShell, T as isPlanarWire, V as getDisposalStats, W as resetDisposalStats, X as getActiveKernelId, Y as _usingCtx, Z as getKernel, _ as isSolid, a as createEdge, at as registerKernel, b as closedWire, c as createSolid, ct as withQuality, d as isCompound, dt as supportsProjection, et as getKernelTier, f as isEdge, ft as BrepkitAdapter, g as isShell, h as isShape3D, ht as currentQuality, i as createCompound, it as prewarm, j as validSolid, k as planarFace, l as createVertex, lt as withTier, m as isShape1D, mt as resetPerformanceStats, n as castShape3D, nt as initFromManifold, o as createFace, ot as registerKernelTier, p as isFace, pt as getPerformanceStats, q as withScopeResult, rt as initFromOC, s as createShell, st as withKernel, t as castShape, tt as init, u as createWire, ut as supportsConstraintSketch, v as isVertex, w as isPlanarFace, x as isClosedWire, y as isWire, z as createHandle } from "./shapeTypes-D9XYNPBs.js";
 import { E as EXACT_BREP_CAPABILITIES, T as DEFAULT_CAPABILITIES, t as OcctWasmAdapter } from "./occtWasmAdapter-D7mOxU0Q.js";
 import { n as wasmIndex } from "./vec3-Dpha8d5k.js";
 import { A as ok, B as unwrapOr, C as fromNullable, D as mapBoth, E as map, F as tapErr, H as zip, I as tryCatch, L as tryCatchAsync, M as orElse, N as pipeline, O as mapErr, P as tap, R as unwrap, S as flatten, T as isOk, V as unwrapOrElse, _ as all, a as moduleInitError, b as err, c as sketcherStateError, d as validationError, g as OK, h as bug, i as kernelError, j as or, k as match, l as typeCastError, m as BrepBugError, n as computationError, o as queryError, r as ioError, t as BrepErrorCode, u as unsupportedError, v as andThen, w as isErr, x as flatMap, y as collect, z as unwrapErr } from "./errors-DNWJsfVU.js";
-import { C as kernelCall, S as vertexPosition, T as kernelCallScoped, _ as iterFaces, a as getCachedSurfaceType, b as iterVertices, c as getFaces, d as getSolids, f as getVertices, g as iterEdges, h as iterCompSolids, m as invalidateShapeCache, n as getBounds, o as getCompSolids, p as getWires, s as getEdges, t as describe$1, u as getShells, v as iterShells, w as kernelCallRaw, x as iterWires, y as iterSolids } from "./topologyQueryFns-0BIOC7YH.js";
+import { C as kernelCall, S as vertexPosition, T as kernelCallScoped, _ as iterFaces, a as getCachedSurfaceType, b as iterVertices, c as getFaces, d as getSolids, f as getVertices, g as iterEdges, h as iterCompSolids, m as invalidateShapeCache, n as getBounds, o as getCompSolids, p as getWires, s as getEdges, t as describe$1, u as getShells, v as iterShells, w as kernelCallRaw, x as iterWires, y as iterSolids } from "./topologyQueryFns-jDWO6A94.js";
 import { n as HASH_CODE_MAX, r as RAD2DEG, t as DEG2RAD } from "./constants-ITRzCnCp.js";
 import { n as toVec2, r as toVec3, t as resolveDirection } from "./types-D24Y27N0.js";
 import { a as vecDot, c as vecLength, d as vecNormalize, f as vecProjectToPlane, g as vecSub, h as vecScale, i as vecDistance, l as vecLengthSq, m as vecRotate, n as vecAngle, o as vecEquals, p as vecRepr, r as vecCross, s as vecIsZero, t as vecAdd, u as vecNegate } from "./vecOps-SKPRvPH-.js";
 import { i as pivotPlane, n as createPlane, o as resolvePlane, r as makePlane, s as translatePlane, t as createNamedPlane } from "./planeOps-DSjjtrjg.js";
-import { S as shapeType, _ as cast, a as faceOrientation, b as isCompSolid, c as innerWires, d as pointOnSurface, f as projectPointOnFace, g as asTopo, h as uvCoordinates, i as faceGeomType, l as normalAt, m as uvBounds, n as faceAxis, o as flipFaceOrientation, p as removeHolesFromFace, r as faceCenter, s as getSurfaceType, t as classifyPointOnFace, u as outerWire, v as downcast, x as iterTopo, y as fromBREP } from "./faceFns-CmhEEB-L.js";
-import { C as findFacesByTag, D as tagFaces, E as setTagMetadata, O as getFaceOrigins, S as getShapeColor, T as getTagMetadata, a as isSameShape, b as colorShape, c as applyMatrix$1, d as resize, f as rotate$2, h as translate$2, i as isEqualShape, k as setShapeOrigin, l as composeTransforms, m as transformCopy$1, n as getHashCode, o as simplify$1, p as scale$3, r as isEmpty$2, s as toBREP$1, t as clone$1, u as mirror$2, w as getFaceTags, x as getFaceColor, y as colorFaces } from "./shapeFns-DGjXjLp_.js";
-import { a as curveIsPeriodic, c as curvePointAt, d as flipOrientation, f as getCurveType, h as offsetWire2D, i as curveIsClosed, l as curveStartPoint, m as interpolateCurve, n as curveAxis, o as curveLength, p as getOrientation, r as curveEndPoint, s as curvePeriod, t as approximateCurve, u as curveTangentAt } from "./curveFns-DT1yMgBI.js";
-import { a as meshEdges$1, c as createMeshCache, i as mesh$1, n as exportSTEP, o as meshMultiLOD, r as exportSTL, s as clearMeshCache, t as exportIGES } from "./meshFns-IeQzI5dz.js";
+import { S as shapeType, _ as cast, a as faceOrientation, b as isCompSolid, c as innerWires, d as pointOnSurface, f as projectPointOnFace, g as asTopo, h as uvCoordinates, i as faceGeomType, l as normalAt, m as uvBounds, n as faceAxis, o as flipFaceOrientation, p as removeHolesFromFace, r as faceCenter, s as getSurfaceType, t as classifyPointOnFace, u as outerWire, v as downcast, x as iterTopo, y as fromBREP } from "./faceFns-B642NCgD.js";
+import { C as findFacesByTag, D as tagFaces, E as setTagMetadata, O as getFaceOrigins, S as getShapeColor, T as getTagMetadata, a as isSameShape, b as colorShape, c as applyMatrix$1, d as resize, f as rotate$2, h as translate$2, i as isEqualShape, k as setShapeOrigin, l as composeTransforms, m as transformCopy$1, n as getHashCode, o as simplify$1, p as scale$3, r as isEmpty$2, s as toBREP$1, t as clone$1, u as mirror$2, w as getFaceTags, x as getFaceColor, y as colorFaces } from "./shapeFns-FrRtxWiz.js";
+import { a as curveIsPeriodic, c as curvePointAt, d as flipOrientation, f as getCurveType, h as offsetWire2D, i as curveIsClosed, l as curveStartPoint, m as interpolateCurve, n as curveAxis, o as curveLength, p as getOrientation, r as curveEndPoint, s as curvePeriod, t as approximateCurve, u as curveTangentAt } from "./curveFns-BKpLwUdG.js";
+import { a as meshEdges$1, c as createMeshCache, i as mesh$1, n as exportSTEP, o as meshMultiLOD, r as exportSTL, s as clearMeshCache, t as exportIGES } from "./meshFns-k2Bsp0Xp.js";
 import { n as getAtOrThrow, r as lastOrThrow, t as firstOrThrow } from "./arrayAccess-DrUGPADn.js";
-import { _ as makeThreePointArc, d as makeCircle, h as makeLine, l as makeBSplineInterpolation, n as fill, r as makeFace, s as assembleWire } from "./surfaceBuilders-BQx3TjMH.js";
-import { _ as section$1, b as split$1, d as booleanPipeline, f as cut$2, g as intersect$2, h as fuseAll$2, m as fuse$2, p as cutAll$2, r as makeCylinder, v as sectionToFace$1, y as slice$1 } from "./solidBuilders-cM4rOTJ5.js";
-import { A as edgesOfFace, C as shellWithEvolution, D as getNurbsCurveData, E as fuseAllBisect, F as chamferDistAngle, I as toBufferGeometryData, L as toGroupedBufferGeometryData, M as sharedEdges, N as verticesOfEdge, O as getNurbsSurfaceData, P as wiresOfFace, R as toLODGeometryData, S as intersectWithEvolution, T as cutAllBisect, _ as positionOnCurve, a as healFace, b as filletWithEvolution, c as isValid$1, d as draft$1, f as fillet$1, g as variableFillet, h as thicken$1, i as heal$1, j as facesOfEdge, k as adjacentFaces, l as solidFromShell, m as shell$1, n as fixSelfIntersection, o as healSolid, p as offset$1, r as fixShape, s as healWire, t as autoHeal, u as chamfer$1, v as chamferWithEvolution, w as checkBoolean, x as fuseWithEvolution, y as cutWithEvolution, z as toLineGeometryData } from "./healingFns-jp-NXq1c.js";
-import { A as setJointValue, B as findNode, C as cylindricalJoint, D as planarJoint, E as mechanismDOF, F as quatRotate, H as updateNode, I as addChild, J as createAssembly, K as linearPattern, L as collectShapes, M as sphericalJoint, N as quatFromAxisAngle, O as prismaticJoint, P as quatFromTo, R as countNodes, S as addJoint, T as jointTransform, U as walkAssembly, V as removeChild, W as circularPattern, _ as exportURDF, a as deserializeHistory, b as inverseKinematics, c as modifyStep, d as replayFrom, f as replayHistory, g as undoLast, h as stepsFrom, i as createRegistry, j as setJointValues, k as revoluteJoint, l as registerOperation, m as stepCount, n as addStep, o as findStep, p as serializeHistory, q as exportAssemblySTEP, r as createHistory, s as getShape, t as thread, u as registerShape, v as importURDF, w as forwardKinematics, x as jointTrajectory, y as jointsFromDH, z as createAssemblyNode } from "./threadFns-YDyX33Wl.js";
-import { n as BaseSketcher2d, r as organiseBlueprints, t as BlueprintSketcher } from "./blueprintSketcher-CIsOckAh.js";
-import { a as createTypedFinder, i as wireFinder, n as edgeFinder, r as faceFinder, t as getSingleFace } from "./helpers-mPnUPOIM.js";
-import { A as sketchEllipse, D as makeBaseBox, E as deserializeDrawing, F as sketchRectangle, I as sketchRoundedRectangle, L as FaceSketcher, M as sketchHelix, N as sketchParametricFunction, O as polysideInnerRadius, P as sketchPolysides, R as Sketcher, S as drawText, _ as drawPolysides, a as drawingIntersect, b as drawSingleCircle, c as rotateDrawing, d as drawFaceOutline, f as drawProjection, g as drawPointsInterpolation, h as drawParametricFunction, i as drawingFuse, j as sketchFaceOffset, k as sketchCircle, l as scaleDrawing, m as drawEllipse, n as drawingCut, o as drawingToSketchOnPlane, p as drawCircle, r as drawingFillet, s as mirrorDrawing, t as drawingChamfer, u as translateDrawing, v as drawRectangle, w as draw, x as drawSingleEllipse, y as drawRoundedRectangle } from "./drawFns-D23xqM0C.js";
-import { a as measureDistance, c as measureLinearProps, d as measureVolumeProps, i as measureCurvatureAtMid, l as measureSurfaceProps, n as measureArea, o as measureDistanceProps, r as measureCurvatureAt, s as measureLength, t as createDistanceQuery, u as measureVolume } from "./measureFns-D0e8tGSP.js";
-import { t as cornerFinder } from "./cornerFinder-eoxdiUiN.js";
-import { a as fuseBlueprints, c as roundedRectangleBlueprint, i as cutBlueprints, n as fuse2D, o as intersectBlueprints, r as intersect2D, s as polysidesBlueprint, t as cut2D } from "./boolean2D-CZiGMjEF.js";
-import { S as reverseCurve, _ as curve2dIsOnCurve, a as isInside2D, b as curve2dSplitAt, c as scale2D, d as stretch2D, f as toSVGPathD, g as curve2dFirstPoint, h as curve2dDistanceFrom, i as getOrientation2D, l as sketchOnFace2D, m as curve2dBoundingBox, n as createCompoundBlueprint, o as mirror2D, p as translate2D, r as getBounds2D, s as rotate2D, t as createBlueprint, u as sketchOnPlane2D, v as curve2dLastPoint, x as curve2dTangentAt, y as curve2dParameter } from "./blueprintFns-CuZU7Dt6.js";
-import { a as importSVG, c as blueprintToDXF, d as exportGltf, f as exportOBJ, i as exportSTEPConfigured, l as exportDXF, n as importSTEP, o as importSVGPathD, r as importSTL, s as exportThreeMF, t as importIGES, u as exportGlb } from "./importFns-CJVyVdNQ.js";
-import { a as revolve$1, c as multiSectionSweep, d as twistExtrude, i as extrudeAll, l as supportExtrude, n as loftAll, o as complexExtrude, r as extrude$1, s as guidedSweep, t as loft$1, u as sweep$1 } from "./loftFns-CxnBxE9h.js";
-import { a as Sketch, c as compoundSketchLoft, d as sketchFace, f as sketchLoft, h as sketchWires, i as Sketches, l as compoundSketchRevolve, m as sketchSweep, n as getFont, o as compoundSketchExtrude, p as sketchRevolve, r as loadFont, s as compoundSketchFace, t as textBlueprints, u as sketchExtrude, v as CompoundSketch } from "./textBlueprints-BxSDf_IW.js";
-import { a as makeProjectedEdges, i as projectEdges, n as cameraLookAt, r as createCamera, s as isProjectionPlane, t as cameraFromPlane } from "./cameraFns-BA7CVtWJ.js";
-import { n as textMetrics, r as sketchText, t as fontMetrics } from "./textMetrics-CiCNsEr-.js";
-import { a as updateRoles, i as resolveRef, n as captureHint, o as defaultScorer, r as createRef, t as assignRoles } from "./shapeRefFns-DNbdr2rL.js";
+import { _ as makeThreePointArc, d as makeCircle, h as makeLine, l as makeBSplineInterpolation, n as fill, r as makeFace, s as assembleWire } from "./surfaceBuilders-Cf3c00zK.js";
+import { _ as section$1, b as split$1, d as booleanPipeline, f as cut$2, g as intersect$2, h as fuseAll$2, m as fuse$2, p as cutAll$2, r as makeCylinder, v as sectionToFace$1, y as slice$1 } from "./solidBuilders-CxJJkiPi.js";
+import { A as edgesOfFace, C as shellWithEvolution, D as getNurbsCurveData, E as fuseAllBisect, F as chamferDistAngle, I as toBufferGeometryData, L as toGroupedBufferGeometryData, M as sharedEdges, N as verticesOfEdge, O as getNurbsSurfaceData, P as wiresOfFace, R as toLODGeometryData, S as intersectWithEvolution, T as cutAllBisect, _ as positionOnCurve, a as healFace, b as filletWithEvolution, c as isValid$1, d as draft$1, f as fillet$1, g as variableFillet, h as thicken$1, i as heal$1, j as facesOfEdge, k as adjacentFaces, l as solidFromShell, m as shell$1, n as fixSelfIntersection, o as healSolid, p as offset$1, r as fixShape, s as healWire, t as autoHeal, u as chamfer$1, v as chamferWithEvolution, w as checkBoolean, x as fuseWithEvolution, y as cutWithEvolution, z as toLineGeometryData } from "./healingFns-CWicvCr2.js";
+import { A as setJointValue, B as findNode, C as cylindricalJoint, D as planarJoint, E as mechanismDOF, F as quatRotate, H as updateNode, I as addChild, J as createAssembly, K as linearPattern, L as collectShapes, M as sphericalJoint, N as quatFromAxisAngle, O as prismaticJoint, P as quatFromTo, R as countNodes, S as addJoint, T as jointTransform, U as walkAssembly, V as removeChild, W as circularPattern, _ as exportURDF, a as deserializeHistory, b as inverseKinematics, c as modifyStep, d as replayFrom, f as replayHistory, g as undoLast, h as stepsFrom, i as createRegistry, j as setJointValues, k as revoluteJoint, l as registerOperation, m as stepCount, n as addStep, o as findStep, p as serializeHistory, q as exportAssemblySTEP, r as createHistory, s as getShape, t as thread, u as registerShape, v as importURDF, w as forwardKinematics, x as jointTrajectory, y as jointsFromDH, z as createAssemblyNode } from "./threadFns-BcgGRuMg.js";
+import { n as BaseSketcher2d, r as organiseBlueprints, t as BlueprintSketcher } from "./blueprintSketcher-B5XBXgri.js";
+import { a as createTypedFinder, i as wireFinder, n as edgeFinder, r as faceFinder, t as getSingleFace } from "./helpers-VUDxsMV6.js";
+import { A as sketchEllipse, D as makeBaseBox, E as deserializeDrawing, F as sketchRectangle, I as sketchRoundedRectangle, L as FaceSketcher, M as sketchHelix, N as sketchParametricFunction, O as polysideInnerRadius, P as sketchPolysides, R as Sketcher, S as drawText, _ as drawPolysides, a as drawingIntersect, b as drawSingleCircle, c as rotateDrawing, d as drawFaceOutline, f as drawProjection, g as drawPointsInterpolation, h as drawParametricFunction, i as drawingFuse, j as sketchFaceOffset, k as sketchCircle, l as scaleDrawing, m as drawEllipse, n as drawingCut, o as drawingToSketchOnPlane, p as drawCircle, r as drawingFillet, s as mirrorDrawing, t as drawingChamfer, u as translateDrawing, v as drawRectangle, w as draw, x as drawSingleEllipse, y as drawRoundedRectangle } from "./drawFns-SFAjbxKc.js";
+import { a as measureDistance, c as measureLinearProps, d as measureVolumeProps, i as measureCurvatureAtMid, l as measureSurfaceProps, n as measureArea, o as measureDistanceProps, r as measureCurvatureAt, s as measureLength, t as createDistanceQuery, u as measureVolume } from "./measureFns-o-fR5CV_.js";
+import { t as cornerFinder } from "./cornerFinder-B-zZ2G9-.js";
+import { a as fuseBlueprints, c as roundedRectangleBlueprint, i as cutBlueprints, n as fuse2D, o as intersectBlueprints, r as intersect2D, s as polysidesBlueprint, t as cut2D } from "./boolean2D-DiQyJiA-.js";
+import { S as reverseCurve, _ as curve2dIsOnCurve, a as isInside2D, b as curve2dSplitAt, c as scale2D, d as stretch2D, f as toSVGPathD, g as curve2dFirstPoint, h as curve2dDistanceFrom, i as getOrientation2D, l as sketchOnFace2D, m as curve2dBoundingBox, n as createCompoundBlueprint, o as mirror2D, p as translate2D, r as getBounds2D, s as rotate2D, t as createBlueprint, u as sketchOnPlane2D, v as curve2dLastPoint, x as curve2dTangentAt, y as curve2dParameter } from "./blueprintFns-_emMJGKf.js";
+import { a as importSVG, c as blueprintToDXF, d as exportGltf, f as exportOBJ, i as exportSTEPConfigured, l as exportDXF, n as importSTEP, o as importSVGPathD, r as importSTL, s as exportThreeMF, t as importIGES, u as exportGlb } from "./importFns-CPEC-mu2.js";
+import { a as revolve$1, c as multiSectionSweep, d as twistExtrude, i as extrudeAll, l as supportExtrude, n as loftAll, o as complexExtrude, r as extrude$1, s as guidedSweep, t as loft$1, u as sweep$1 } from "./loftFns-6LL25A5A.js";
+import { a as Sketch, c as compoundSketchLoft, d as sketchFace, f as sketchLoft, h as sketchWires, i as Sketches, l as compoundSketchRevolve, m as sketchSweep, n as getFont, o as compoundSketchExtrude, p as sketchRevolve, r as loadFont, s as compoundSketchFace, t as textBlueprints, u as sketchExtrude, v as CompoundSketch } from "./textBlueprints-DbLlIr5s.js";
+import { a as makeProjectedEdges, i as projectEdges, n as cameraLookAt, r as createCamera, s as isProjectionPlane, t as cameraFromPlane } from "./cameraFns-BCLtAeFB.js";
+import { n as textMetrics, r as sketchText, t as fontMetrics } from "./textMetrics-BWST-GMU.js";
+import { a as updateRoles, i as resolveRef, n as captureHint, o as defaultScorer, r as createRef, t as assignRoles } from "./shapeRefFns-C2oR3Cid.js";
 import { a as createTaskQueue, c as isEmpty$1, d as isDisposeRequest, f as isErrorResponse, h as isSuccessResponse, i as createWorkerClient, l as pendingCount, m as isOperationRequest, n as createWorkerHandler, o as dequeueTask, p as isInitRequest, r as registerHandler, s as enqueueTask, t as createOperationRegistry, u as rejectAll } from "./workerHandler-CFetYgIm.js";
-import { C as threePointArc, D as wireLoop, E as wire, S as tangentArc, T as vertex, _ as polygon, a as circle, b as sphere$1, c as cylinder, d as ellipsoid, f as face, g as offsetFace, h as line, i as bsplineApprox, l as ellipse, m as helix, n as bezier, o as compound, p as filledFace, r as box, s as cone, t as addHoles, u as ellipseArc, v as sewShells, w as torus$1, x as subFace, y as solid } from "./primitiveFns-DOHI4nuz.js";
+import { C as threePointArc, D as wireLoop, E as wire, S as tangentArc, T as vertex, _ as polygon, a as circle, b as sphere$1, c as cylinder, d as ellipsoid, f as face, g as offsetFace, h as line, i as bsplineApprox, l as ellipse, m as helix, n as bezier, o as compound, p as filledFace, r as box, s as cone, t as addHoles, u as ellipseArc, v as sewShells, w as torus$1, x as subFace, y as solid } from "./primitiveFns-CPbjoGeA.js";
 //#region \0rolldown/runtime.js
 var __defProp = Object.defineProperty;
 var __exportAll = (all, no_symbols) => {

package/dist/{cameraFns-BA7CVtWJ.js → cameraFns-BCLtAeFB.js}

@@ -1,6 +1,6 @@
-import { Z as getKernel, t as castShape } from "./shapeTypes-BIcALNFv.js";
+import { Z as getKernel, t as castShape } from "./shapeTypes-D9XYNPBs.js";
 import { A as ok, b as err, d as validationError } from "./errors-DNWJsfVU.js";
-import { s as getEdges } from "./topologyQueryFns-0BIOC7YH.js";
+import { s as getEdges } from "./topologyQueryFns-jDWO6A94.js";
 import { c as vecLength, d as vecNormalize, g as vecSub, r as vecCross } from "./vecOps-SKPRvPH-.js";
 //#region src/projection/projectionPlanes.ts
 /** Lookup table mapping each {@link ProjectionPlane} to its camera configuration. */

package/dist/{cameraFns-IL7qYFaG.cjs → cameraFns-BjcKjYpw.cjs}

@@ -1,6 +1,6 @@
-const require_shapeTypes = require("./shapeTypes-DwNTiXjG.cjs");
+const require_shapeTypes = require("./shapeTypes-DplVM8Fy.cjs");
 const require_errors = require("./errors-CXJtc4I7.cjs");
-const require_topologyQueryFns = require("./topologyQueryFns-a2i0YhGF.cjs");
+const require_topologyQueryFns = require("./topologyQueryFns-Dzw_tis6.cjs");
 const require_vecOps = require("./vecOps-CCnJt-yH.cjs");
 //#region src/projection/projectionPlanes.ts
 /** Lookup table mapping each {@link ProjectionPlane} to its camera configuration. */

package/dist/core.cjs

@@ -1,5 +1,5 @@
 Object.defineProperty(exports, Symbol.toStringTag, { value: "Module" });
-const require_shapeTypes = require("./shapeTypes-DwNTiXjG.cjs");
+const require_shapeTypes = require("./shapeTypes-DplVM8Fy.cjs");
 const require_errors = require("./errors-CXJtc4I7.cjs");
 const require_constants = require("./constants-BOVyEYGH.cjs");
 const require_types = require("./types-KjA8tY4Y.cjs");

package/dist/core.js

@@ -1,4 +1,4 @@
-import { B as createKernelHandle, C as isOrientedFace, D as manifoldShell, E as isValidSolid, H as isLive, I as is2D, J as withScopeResultAsync, K as withScope, L as is3D, M as getShapeKind, O as orientedFace, R as DisposalScope, S as isManifoldShell, _ as isSolid, b as closedWire, d as isCompound, f as isEdge, g as isShell, h as isShape3D, j as validSolid, m as isShape1D, p as isFace, q as withScopeResult, t as castShape, v as isVertex, x as isClosedWire, y as isWire, z as createHandle } from "./shapeTypes-BIcALNFv.js";
+import { B as createKernelHandle, C as isOrientedFace, D as manifoldShell, E as isValidSolid, H as isLive, I as is2D, J as withScopeResultAsync, K as withScope, L as is3D, M as getShapeKind, O as orientedFace, R as DisposalScope, S as isManifoldShell, _ as isSolid, b as closedWire, d as isCompound, f as isEdge, g as isShell, h as isShape3D, j as validSolid, m as isShape1D, p as isFace, q as withScopeResult, t as castShape, v as isVertex, x as isClosedWire, y as isWire, z as createHandle } from "./shapeTypes-D9XYNPBs.js";
 import { A as ok, B as unwrapOr, E as map, I as tryCatch, L as tryCatchAsync, O as mapErr, R as unwrap, T as isOk, V as unwrapOrElse, a as moduleInitError, b as err, c as sketcherStateError, d as validationError, g as OK, h as bug, i as kernelError, k as match, l as typeCastError, m as BrepBugError, n as computationError, o as queryError, r as ioError, u as unsupportedError, v as andThen, w as isErr, x as flatMap, y as collect, z as unwrapErr } from "./errors-DNWJsfVU.js";
 import { n as HASH_CODE_MAX, r as RAD2DEG, t as DEG2RAD } from "./constants-ITRzCnCp.js";
 import { n as toVec2, r as toVec3, t as resolveDirection } from "./types-D24Y27N0.js";

package/dist/{cornerFinder-eoxdiUiN.js → cornerFinder-B-zZ2G9-.js}

@@ -1,6 +1,6 @@
 import { t as DEG2RAD } from "./constants-ITRzCnCp.js";
 import { n as getAtOrThrow } from "./arrayAccess-DrUGPADn.js";
-import { _ as samePoint, p as distance2d, u as angle2d } from "./helpers-mPnUPOIM.js";
+import { _ as samePoint, p as distance2d, u as angle2d } from "./helpers-VUDxsMV6.js";
 //#region src/query/cornerFinder.ts
 var PI_2 = 2 * Math.PI;
 function positiveHalfAngle(angle) {

package/dist/{cornerFinder-C83MpPRk.cjs → cornerFinder-DyYE74wI.cjs}

@@ -1,6 +1,6 @@
 const require_constants = require("./constants-BOVyEYGH.cjs");
 const require_arrayAccess = require("./arrayAccess-e4H9cBfh.cjs");
-const require_helpers = require("./helpers-Bykw93Yc.cjs");
+const require_helpers = require("./helpers-BVwuuo7f.cjs");
 //#region src/query/cornerFinder.ts
 var PI_2 = 2 * Math.PI;
 function positiveHalfAngle(angle) {

package/dist/{curveFns-DT1yMgBI.js → curveFns-BKpLwUdG.js}

@@ -1,4 +1,4 @@
-import { Z as getKernel, f as isEdge, t as castShape, y as isWire } from "./shapeTypes-BIcALNFv.js";
+import { Z as getKernel, f as isEdge, t as castShape, y as isWire } from "./shapeTypes-D9XYNPBs.js";
 import { A as ok, b as err, l as typeCastError } from "./errors-DNWJsfVU.js";
 //#region src/topology/curveFns.ts
 /**

package/dist/{curveFns-D3k8aHIE.cjs → curveFns-DwBW-FmM.cjs}

@@ -1,4 +1,4 @@
-const require_shapeTypes = require("./shapeTypes-DwNTiXjG.cjs");
+const require_shapeTypes = require("./shapeTypes-DplVM8Fy.cjs");
 const require_errors = require("./errors-CXJtc4I7.cjs");
 //#region src/topology/curveFns.ts
 /**

package/dist/{drawFns-C6K03snv.cjs → drawFns-BDPAuKxN.cjs}

@@ -1,22 +1,22 @@
-const require_textBlueprints = require("./textBlueprints-BXfjcyoe.cjs");
-const require_shapeTypes = require("./shapeTypes-DwNTiXjG.cjs");
+const require_textBlueprints = require("./textBlueprints-ypK-L96F.cjs");
+const require_shapeTypes = require("./shapeTypes-DplVM8Fy.cjs");
 const require_vec3 = require("./vec3-CFwOI0ZI.cjs");
 const require_errors = require("./errors-CXJtc4I7.cjs");
-const require_topologyQueryFns = require("./topologyQueryFns-a2i0YhGF.cjs");
+const require_topologyQueryFns = require("./topologyQueryFns-Dzw_tis6.cjs");
 const require_constants = require("./constants-BOVyEYGH.cjs");
 const require_types = require("./types-KjA8tY4Y.cjs");
 const require_vecOps = require("./vecOps-CCnJt-yH.cjs");
 const require_planeOps = require("./planeOps-BA4HfgQu.cjs");
-const require_faceFns = require("./faceFns-DSdVqqVP.cjs");
-const require_curveFns = require("./curveFns-D3k8aHIE.cjs");
+const require_faceFns = require("./faceFns-DrBS1FKx.cjs");
+const require_curveFns = require("./curveFns-DwBW-FmM.cjs");
 const require_arrayAccess = require("./arrayAccess-e4H9cBfh.cjs");
-const require_surfaceBuilders = require("./surfaceBuilders-DvpxHHIm.cjs");
-const require_blueprintSketcher = require("./blueprintSketcher-B7QRguA5.cjs");
-const require_helpers = require("./helpers-Bykw93Yc.cjs");
-const require_blueprint = require("./blueprint-BoK8H4Eq.cjs");
-const require_cornerFinder = require("./cornerFinder-C83MpPRk.cjs");
-const require_boolean2D = require("./boolean2D-DcowIZPB.cjs");
-const require_cameraFns = require("./cameraFns-IL7qYFaG.cjs");
+const require_surfaceBuilders = require("./surfaceBuilders-CDrFrFBH.cjs");
+const require_blueprintSketcher = require("./blueprintSketcher-DwL9iPAG.cjs");
+const require_helpers = require("./helpers-BVwuuo7f.cjs");
+const require_blueprint = require("./blueprint-BhCha_8H.cjs");
+const require_cornerFinder = require("./cornerFinder-DyYE74wI.cjs");
+const require_boolean2D = require("./boolean2D-BJ6MwGgV.cjs");
+const require_cameraFns = require("./cameraFns-BjcKjYpw.cjs");
 //#region src/2d/lib/stitching.ts
 /**
 * Group a flat list of curves into connected chains by matching endpoints.

package/dist/{drawFns-D23xqM0C.js → drawFns-SFAjbxKc.js}

@@ -1,22 +1,22 @@
-import { R as DisposalScope, Y as _usingCtx, Z as getKernel, a as createEdge, o as createFace, u as createWire } from "./shapeTypes-BIcALNFv.js";
+import { R as DisposalScope, Y as _usingCtx, Z as getKernel, a as createEdge, o as createFace, u as createWire } from "./shapeTypes-D9XYNPBs.js";
 import { n as wasmIndex } from "./vec3-Dpha8d5k.js";
 import { R as unwrap, h as bug, s as safeIndex } from "./errors-DNWJsfVU.js";
-import { s as getEdges } from "./topologyQueryFns-0BIOC7YH.js";
+import { s as getEdges } from "./topologyQueryFns-jDWO6A94.js";
 import { t as DEG2RAD } from "./constants-ITRzCnCp.js";
 import { r as toVec3 } from "./types-D24Y27N0.js";
 import { d as vecNormalize, g as vecSub, h as vecScale, m as vecRotate, r as vecCross } from "./vecOps-SKPRvPH-.js";
 import { a as planeToWorld, o as resolvePlane } from "./planeOps-DSjjtrjg.js";
-import { d as pointOnSurface, l as normalAt, m as uvBounds, r as faceCenter, u as outerWire, v as downcast } from "./faceFns-CmhEEB-L.js";
-import { h as offsetWire2D, i as curveIsClosed, l as curveStartPoint } from "./curveFns-DT1yMgBI.js";
+import { d as pointOnSurface, l as normalAt, m as uvBounds, r as faceCenter, u as outerWire, v as downcast } from "./faceFns-B642NCgD.js";
+import { h as offsetWire2D, i as curveIsClosed, l as curveStartPoint } from "./curveFns-BKpLwUdG.js";
 import { n as getAtOrThrow, r as lastOrThrow, t as firstOrThrow } from "./arrayAccess-DrUGPADn.js";
-import { c as makeBSplineApproximation, d as makeCircle, f as makeEllipse, m as makeHelix, r as makeFace, s as assembleWire } from "./surfaceBuilders-BQx3TjMH.js";
-import { a as Blueprints, c as make2dOffset, i as CompoundBlueprint, l as intersectCurves, n as BaseSketcher2d, o as chamferCurves, s as filletCurves, u as Flatbush } from "./blueprintSketcher-CIsOckAh.js";
-import { _ as samePoint$1, b as subtract2d, c as PRECISION_OFFSET, l as add2d, y as squareDistance2d } from "./helpers-mPnUPOIM.js";
-import { _ as Curve2D, a as edgeToCurve, c as make2dCircle, d as make2dInerpolatedBSplineCurve, f as make2dSegmentCurve, g as approximateAsSvgCompatibleCurve, i as curvesAsEdgesOnPlane, l as make2dEllipse, o as make2dArcFromCenter, t as Blueprint, v as deserializeCurve2D, y as BoundingBox2d } from "./blueprint-Dg3dsUal.js";
-import { t as cornerFinder } from "./cornerFinder-eoxdiUiN.js";
-import { c as roundedRectangleBlueprint, n as fuse2D, r as intersect2D, s as polysidesBlueprint, t as cut2D } from "./boolean2D-CZiGMjEF.js";
-import { _ as wrapSketchDataArray, a as Sketch, g as wrapSketchData, i as Sketches, t as textBlueprints } from "./textBlueprints-BxSDf_IW.js";
-import { i as projectEdges, t as cameraFromPlane } from "./cameraFns-BA7CVtWJ.js";
+import { c as makeBSplineApproximation, d as makeCircle, f as makeEllipse, m as makeHelix, r as makeFace, s as assembleWire } from "./surfaceBuilders-Cf3c00zK.js";
+import { a as Blueprints, c as make2dOffset, i as CompoundBlueprint, l as intersectCurves, n as BaseSketcher2d, o as chamferCurves, s as filletCurves, u as Flatbush } from "./blueprintSketcher-B5XBXgri.js";
+import { _ as samePoint$1, b as subtract2d, c as PRECISION_OFFSET, l as add2d, y as squareDistance2d } from "./helpers-VUDxsMV6.js";
+import { _ as Curve2D, a as edgeToCurve, c as make2dCircle, d as make2dInerpolatedBSplineCurve, f as make2dSegmentCurve, g as approximateAsSvgCompatibleCurve, i as curvesAsEdgesOnPlane, l as make2dEllipse, o as make2dArcFromCenter, t as Blueprint, v as deserializeCurve2D, y as BoundingBox2d } from "./blueprint-Bqmxcyfd.js";
+import { t as cornerFinder } from "./cornerFinder-B-zZ2G9-.js";
+import { c as roundedRectangleBlueprint, n as fuse2D, r as intersect2D, s as polysidesBlueprint, t as cut2D } from "./boolean2D-DiQyJiA-.js";
+import { _ as wrapSketchDataArray, a as Sketch, g as wrapSketchData, i as Sketches, t as textBlueprints } from "./textBlueprints-DbLlIr5s.js";
+import { i as projectEdges, t as cameraFromPlane } from "./cameraFns-BCLtAeFB.js";
 //#region src/2d/lib/stitching.ts
 /**
 * Group a flat list of curves into connected chains by matching endpoints.

package/dist/{faceFns-CmhEEB-L.js → faceFns-B642NCgD.js}

@@ -1,6 +1,6 @@
-import { Z as getKernel, t as castShape } from "./shapeTypes-BIcALNFv.js";
+import { Z as getKernel, t as castShape } from "./shapeTypes-D9XYNPBs.js";
 import { A as ok, R as unwrap, b as err, l as typeCastError } from "./errors-DNWJsfVU.js";
-import { a as getCachedSurfaceType } from "./topologyQueryFns-0BIOC7YH.js";
+import { a as getCachedSurfaceType } from "./topologyQueryFns-jDWO6A94.js";
 import { r as toVec3 } from "./types-D24Y27N0.js";
 //#region src/topology/cast.ts
 var TOPO_ENUM = {

package/dist/{faceFns-DSdVqqVP.cjs → faceFns-DrBS1FKx.cjs}

@@ -1,6 +1,6 @@
-const require_shapeTypes = require("./shapeTypes-DwNTiXjG.cjs");
+const require_shapeTypes = require("./shapeTypes-DplVM8Fy.cjs");
 const require_errors = require("./errors-CXJtc4I7.cjs");
-const require_topologyQueryFns = require("./topologyQueryFns-a2i0YhGF.cjs");
+const require_topologyQueryFns = require("./topologyQueryFns-Dzw_tis6.cjs");
 const require_types = require("./types-KjA8tY4Y.cjs");
 //#region src/topology/cast.ts
 var TOPO_ENUM = {

package/dist/{healingFns-CRH5H0ik.cjs → healingFns-CA_Pxs_R.cjs}

@@ -1,11 +1,11 @@
-const require_shapeTypes = require("./shapeTypes-DwNTiXjG.cjs");
+const require_shapeTypes = require("./shapeTypes-DplVM8Fy.cjs");
 const require_errors = require("./errors-CXJtc4I7.cjs");
-const require_topologyQueryFns = require("./topologyQueryFns-a2i0YhGF.cjs");
+const require_topologyQueryFns = require("./topologyQueryFns-Dzw_tis6.cjs");
 const require_constants = require("./constants-BOVyEYGH.cjs");
-const require_faceFns = require("./faceFns-DSdVqqVP.cjs");
-const require_shapeFns = require("./shapeFns-CqYYHFqr.cjs");
+const require_faceFns = require("./faceFns-DrBS1FKx.cjs");
+const require_shapeFns = require("./shapeFns-eQx9e6lo.cjs");
 const require_arrayAccess = require("./arrayAccess-e4H9cBfh.cjs");
-const require_solidBuilders = require("./solidBuilders-DtK5cc9v.cjs");
+const require_solidBuilders = require("./solidBuilders-DI4CSKe-.cjs");
 //#region src/topology/threeHelpers.ts
 /**
 * Convert a ShapeMesh into BufferGeometry-compatible typed arrays.

package/dist/{healingFns-jp-NXq1c.js → healingFns-CWicvCr2.js}

@@ -1,11 +1,11 @@
-import { Z as getKernel, _ as isSolid, h as isShape3D, p as isFace, r as castShapeWithKnownType, t as castShape, y as isWire } from "./shapeTypes-BIcALNFv.js";
+import { Z as getKernel, _ as isSolid, h as isShape3D, p as isFace, r as castShapeWithKnownType, t as castShape, y as isWire } from "./shapeTypes-D9XYNPBs.js";
 import { A as ok, T as isOk, b as err, d as validationError, i as kernelError, l as typeCastError, t as BrepErrorCode, w as isErr } from "./errors-DNWJsfVU.js";
-import { c as getFaces, i as getCachedIsValid, l as getOrCreateCache, m as invalidateShapeCache, p as getWires, s as getEdges } from "./topologyQueryFns-0BIOC7YH.js";
+import { c as getFaces, i as getCachedIsValid, l as getOrCreateCache, m as invalidateShapeCache, p as getWires, s as getEdges } from "./topologyQueryFns-jDWO6A94.js";
 import { n as HASH_CODE_MAX } from "./constants-ITRzCnCp.js";
-import { v as downcast } from "./faceFns-CmhEEB-L.js";
-import { _ as propagateAllMetadata, g as collectInputFaceHashes } from "./shapeFns-DGjXjLp_.js";
+import { v as downcast } from "./faceFns-B642NCgD.js";
+import { _ as propagateAllMetadata, g as collectInputFaceHashes } from "./shapeFns-FrRtxWiz.js";
 import { t as firstOrThrow } from "./arrayAccess-DrUGPADn.js";
-import { f as cut, h as fuseAll, m as fuse, p as cutAll } from "./solidBuilders-cM4rOTJ5.js";
+import { f as cut, h as fuseAll, m as fuse, p as cutAll } from "./solidBuilders-CxJJkiPi.js";
 //#region src/topology/threeHelpers.ts
 /**
 * Convert a ShapeMesh into BufferGeometry-compatible typed arrays.

package/dist/{helpers-Bykw93Yc.cjs → helpers-BVwuuo7f.cjs}

@@ -1,12 +1,12 @@
-const require_shapeTypes = require("./shapeTypes-DwNTiXjG.cjs");
+const require_shapeTypes = require("./shapeTypes-DplVM8Fy.cjs");
 const require_errors = require("./errors-CXJtc4I7.cjs");
-const require_topologyQueryFns = require("./topologyQueryFns-a2i0YhGF.cjs");
+const require_topologyQueryFns = require("./topologyQueryFns-Dzw_tis6.cjs");
 const require_constants = require("./constants-BOVyEYGH.cjs");
 const require_vecOps = require("./vecOps-CCnJt-yH.cjs");
-const require_faceFns = require("./faceFns-DSdVqqVP.cjs");
-const require_shapeFns = require("./shapeFns-CqYYHFqr.cjs");
-const require_curveFns = require("./curveFns-D3k8aHIE.cjs");
-const require_measureFns = require("./measureFns-BtPAmRfH.cjs");
+const require_faceFns = require("./faceFns-DrBS1FKx.cjs");
+const require_shapeFns = require("./shapeFns-eQx9e6lo.cjs");
+const require_curveFns = require("./curveFns-DwBW-FmM.cjs");
+const require_measureFns = require("./measureFns-CMzOaAYQ.cjs");
 //#region src/utils/vec2d.ts
 /** Precision for curve intersection and parameter operations. */
 var PRECISION_INTERSECTION = 1e-9;

package/dist/{helpers-mPnUPOIM.js → helpers-VUDxsMV6.js}

@@ -1,12 +1,12 @@
-import { Z as getKernel, p as isFace } from "./shapeTypes-BIcALNFv.js";
+import { Z as getKernel, p as isFace } from "./shapeTypes-D9XYNPBs.js";
 import { A as ok, T as isOk, b as err, h as bug, o as queryError } from "./errors-DNWJsfVU.js";
-import { c as getFaces, f as getVertices, p as getWires, s as getEdges } from "./topologyQueryFns-0BIOC7YH.js";
+import { c as getFaces, f as getVertices, p as getWires, s as getEdges } from "./topologyQueryFns-jDWO6A94.js";
 import { t as DEG2RAD } from "./constants-ITRzCnCp.js";
 import { a as vecDot, d as vecNormalize } from "./vecOps-SKPRvPH-.js";
-import { l as normalAt, s as getSurfaceType } from "./faceFns-CmhEEB-L.js";
-import { a as isSameShape, n as getHashCode } from "./shapeFns-DGjXjLp_.js";
-import { f as getCurveType, i as curveIsClosed, o as curveLength } from "./curveFns-DT1yMgBI.js";
-import { n as measureArea } from "./measureFns-D0e8tGSP.js";
+import { l as normalAt, s as getSurfaceType } from "./faceFns-B642NCgD.js";
+import { a as isSameShape, n as getHashCode } from "./shapeFns-FrRtxWiz.js";
+import { f as getCurveType, i as curveIsClosed, o as curveLength } from "./curveFns-BKpLwUdG.js";
+import { n as measureArea } from "./measureFns-o-fR5CV_.js";
 //#region src/utils/vec2d.ts
 /** Precision for curve intersection and parameter operations. */
 var PRECISION_INTERSECTION = 1e-9;

package/dist/{importFns-CJVyVdNQ.js → importFns-CPEC-mu2.js}

@@ -1,8 +1,8 @@
-import { Z as getKernel, t as castShape } from "./shapeTypes-BIcALNFv.js";
+import { Z as getKernel, t as castShape } from "./shapeTypes-D9XYNPBs.js";
 import { n as wasmIndex, t as vec3At$1 } from "./vec3-Dpha8d5k.js";
 import { A as ok, b as err, r as ioError, t as BrepErrorCode } from "./errors-DNWJsfVU.js";
 import { n as getAtOrThrow } from "./arrayAccess-DrUGPADn.js";
-import { f as make2dSegmentCurve, m as make2dThreePointArc, s as make2dBezierCurve, t as Blueprint } from "./blueprint-Dg3dsUal.js";
+import { f as make2dSegmentCurve, m as make2dThreePointArc, s as make2dBezierCurve, t as Blueprint } from "./blueprint-Bqmxcyfd.js";
 //#region src/io/objExportFns.ts
 /** Read a vec3 from a typed array at the given vertex index. */
 function vec3At(arr, i) {

package/dist/{importFns-Nlx1v8IF.cjs → importFns-D7CBrzdj.cjs}

@@ -1,8 +1,8 @@
-const require_shapeTypes = require("./shapeTypes-DwNTiXjG.cjs");
+const require_shapeTypes = require("./shapeTypes-DplVM8Fy.cjs");
 const require_vec3 = require("./vec3-CFwOI0ZI.cjs");
 const require_errors = require("./errors-CXJtc4I7.cjs");
 const require_arrayAccess = require("./arrayAccess-e4H9cBfh.cjs");
-const require_blueprint = require("./blueprint-BoK8H4Eq.cjs");
+const require_blueprint = require("./blueprint-BhCha_8H.cjs");
 //#region src/io/objExportFns.ts
 /** Read a vec3 from a typed array at the given vertex index. */
 function vec3At(arr, i) {

package/dist/io.cjs

@@ -1,6 +1,6 @@
 Object.defineProperty(exports, Symbol.toStringTag, { value: "Module" });
-const require_meshFns = require("./meshFns-Cv-_-nIL.cjs");
-const require_importFns = require("./importFns-Nlx1v8IF.cjs");
+const require_meshFns = require("./meshFns-DoqRG8XQ.cjs");
+const require_importFns = require("./importFns-D7CBrzdj.cjs");
 exports.blueprintToDXF = require_importFns.blueprintToDXF;
 exports.exportDXF = require_importFns.exportDXF;
 exports.exportGlb = require_importFns.exportGlb;

package/dist/io.js

@@ -1,3 +1,3 @@
-import { n as exportSTEP, r as exportSTL, t as exportIGES } from "./meshFns-IeQzI5dz.js";
-import { a as importSVG, c as blueprintToDXF, d as exportGltf, f as exportOBJ, i as exportSTEPConfigured, l as exportDXF, n as importSTEP, o as importSVGPathD, r as importSTL, s as exportThreeMF, t as importIGES, u as exportGlb } from "./importFns-CJVyVdNQ.js";
+import { n as exportSTEP, r as exportSTL, t as exportIGES } from "./meshFns-k2Bsp0Xp.js";
+import { a as importSVG, c as blueprintToDXF, d as exportGltf, f as exportOBJ, i as exportSTEPConfigured, l as exportDXF, n as importSTEP, o as importSVGPathD, r as importSTL, s as exportThreeMF, t as importIGES, u as exportGlb } from "./importFns-CPEC-mu2.js";
 export { blueprintToDXF, exportDXF, exportGlb, exportGltf, exportIGES, exportOBJ, exportSTEP, exportSTEPConfigured, exportSTL, exportThreeMF, importIGES, importSTEP, importSTL, importSVG, importSVGPathD };

package/dist/kernel/brepkit/brepkitWasmTypes.d.ts

@@ -223,8 +223,8 @@ export interface BrepkitKernel {
     /** @unwired */
     tessellateEdge(edge: number, numPoints: number): Float64Array;
     /** @unwired */
-    meshEdges(solid: number, deflection: number): BrepkitEdgeLines;
-    meshEdgesAll(solid: number, deflection: number): BrepkitEdgeLines;
+    meshEdges(solid: number, deflection: number, angularTolerance?: number | null): BrepkitEdgeLines;
+    meshEdgesAll(solid: number, deflection: number, angularTolerance?: number | null): BrepkitEdgeLines;
     meshBoolean(positionsA: Float64Array | number[], indicesA: Uint32Array | number[], positionsB: Float64Array | number[], indicesB: Uint32Array | number[], op: string, tolerance: number): BrepkitMesh;
     exportStep(solid: number): Uint8Array;
     /** @unwired */

package/dist/kernel/interfaces/meshOps.d.ts

@@ -2,10 +2,8 @@ import { KernelEdgeMeshResult, KernelMeshResult, KernelShape, MeshOptions } from
 export interface KernelMeshOps {
     mesh(shape: KernelShape, options: MeshOptions): KernelMeshResult;
     /**
-     * Tessellate edges for wireframe display.
-     *
-     * **Cross-kernel note**: brepkit only supports linear deflection;
-     * `angularTolerance` is ignored (a one-time warning is emitted).
+     * Tessellate edges for wireframe display. Both linear `tolerance`
+     * (deflection) and `angularTolerance` are honored across kernels.
      */
     meshEdges(shape: KernelShape, tolerance: number, angularTolerance: number): KernelEdgeMeshResult;
     /** Check if a shape already has triangulation data. */

package/dist/{loftFns-CxnBxE9h.js → loftFns-6LL25A5A.js}

@@ -1,4 +1,4 @@
-import { Z as getKernel, c as createSolid, h as isShape3D, t as castShape, y as isWire } from "./shapeTypes-BIcALNFv.js";
+import { Z as getKernel, c as createSolid, h as isShape3D, t as castShape, y as isWire } from "./shapeTypes-D9XYNPBs.js";
 import { A as ok, b as err, d as validationError, i as kernelError, l as typeCastError, t as BrepErrorCode, w as isErr } from "./errors-DNWJsfVU.js";
 import { r as toVec3 } from "./types-D24Y27N0.js";
 import { c as vecLength, d as vecNormalize, t as vecAdd } from "./vecOps-SKPRvPH-.js";

package/dist/{loftFns-CyrWJCXb.cjs → loftFns-BG5aCsSy.cjs}

@@ -1,4 +1,4 @@
-const require_shapeTypes = require("./shapeTypes-DwNTiXjG.cjs");
+const require_shapeTypes = require("./shapeTypes-DplVM8Fy.cjs");
 const require_errors = require("./errors-CXJtc4I7.cjs");
 const require_types = require("./types-KjA8tY4Y.cjs");
 const require_vecOps = require("./vecOps-CCnJt-yH.cjs");

package/dist/{measureFns-BtPAmRfH.cjs → measureFns-CMzOaAYQ.cjs}

@@ -1,7 +1,7 @@
-const require_shapeTypes = require("./shapeTypes-DwNTiXjG.cjs");
+const require_shapeTypes = require("./shapeTypes-DplVM8Fy.cjs");
 const require_errors = require("./errors-CXJtc4I7.cjs");
-const require_topologyQueryFns = require("./topologyQueryFns-a2i0YhGF.cjs");
-const require_faceFns = require("./faceFns-DSdVqqVP.cjs");
+const require_topologyQueryFns = require("./topologyQueryFns-Dzw_tis6.cjs");
+const require_faceFns = require("./faceFns-DrBS1FKx.cjs");
 //#region src/measurement/measureCache.ts
 var cache = /* @__PURE__ */ new WeakMap();
 function getCachedMeasurement(shape, key) {

package/dist/{measureFns-D0e8tGSP.js → measureFns-o-fR5CV_.js}

@@ -1,7 +1,7 @@
-import { Z as getKernel } from "./shapeTypes-BIcALNFv.js";
+import { Z as getKernel } from "./shapeTypes-D9XYNPBs.js";
 import { A as ok, b as err, d as validationError, t as BrepErrorCode } from "./errors-DNWJsfVU.js";
-import { w as kernelCallRaw } from "./topologyQueryFns-0BIOC7YH.js";
-import { m as uvBounds } from "./faceFns-CmhEEB-L.js";
+import { w as kernelCallRaw } from "./topologyQueryFns-jDWO6A94.js";
+import { m as uvBounds } from "./faceFns-B642NCgD.js";
 //#region src/measurement/measureCache.ts
 var cache = /* @__PURE__ */ new WeakMap();
 function getCachedMeasurement(shape, key) {

package/dist/measurement.cjs

@@ -1,5 +1,5 @@
 Object.defineProperty(exports, Symbol.toStringTag, { value: "Module" });
-const require_measureFns = require("./measureFns-BtPAmRfH.cjs");
+const require_measureFns = require("./measureFns-CMzOaAYQ.cjs");
 exports.createDistanceQuery = require_measureFns.createDistanceQuery;
 exports.measureArea = require_measureFns.measureArea;
 exports.measureDistance = require_measureFns.measureDistance;

package/dist/measurement.js

@@ -1,2 +1,2 @@
-import { a as measureDistance, c as measureLinearProps, d as measureVolumeProps, l as measureSurfaceProps, n as measureArea, o as measureDistanceProps, s as measureLength, t as createDistanceQuery, u as measureVolume } from "./measureFns-D0e8tGSP.js";
+import { a as measureDistance, c as measureLinearProps, d as measureVolumeProps, l as measureSurfaceProps, n as measureArea, o as measureDistanceProps, s as measureLength, t as createDistanceQuery, u as measureVolume } from "./measureFns-o-fR5CV_.js";
 export { createDistanceQuery, measureArea, measureDistance, measureDistanceProps, measureLength, measureLinearProps, measureSurfaceProps, measureVolume, measureVolumeProps };

package/dist/{meshFns-Cv-_-nIL.cjs → meshFns-DoqRG8XQ.cjs}

@@ -1,7 +1,7 @@
-const require_shapeTypes = require("./shapeTypes-DwNTiXjG.cjs");
+const require_shapeTypes = require("./shapeTypes-DplVM8Fy.cjs");
 const require_errors = require("./errors-CXJtc4I7.cjs");
-const require_topologyQueryFns = require("./topologyQueryFns-a2i0YhGF.cjs");
-const require_shapeFns = require("./shapeFns-CqYYHFqr.cjs");
+const require_topologyQueryFns = require("./topologyQueryFns-Dzw_tis6.cjs");
+const require_shapeFns = require("./shapeFns-eQx9e6lo.cjs");
 //#region src/topology/meshCache.ts
 /**
 * Build a parameter key for the inner cache map (excludes shape identity).

package/dist/{meshFns-IeQzI5dz.js → meshFns-k2Bsp0Xp.js}

@@ -1,7 +1,7 @@
-import { Z as getKernel, gt as qualityDeflection } from "./shapeTypes-BIcALNFv.js";
+import { Z as getKernel, gt as qualityDeflection } from "./shapeTypes-D9XYNPBs.js";
 import { A as ok, b as err, r as ioError } from "./errors-DNWJsfVU.js";
-import { d as getSolids, n as getBounds } from "./topologyQueryFns-0BIOC7YH.js";
-import { O as getFaceOrigins } from "./shapeFns-DGjXjLp_.js";
+import { d as getSolids, n as getBounds } from "./topologyQueryFns-jDWO6A94.js";
+import { O as getFaceOrigins } from "./shapeFns-FrRtxWiz.js";
 //#region src/topology/meshCache.ts
 /**
 * Build a parameter key for the inner cache map (excludes shape identity).

package/dist/operations/threadFns.d.ts

@@ -10,8 +10,15 @@ export interface ThreadOptions {
     height: number;
     /** Radial thread height (crest minus root). Defaults to `0.6 * pitch` (≈ISO 60° V). */
     depth?: number;
-    /** Axial half-width of the V tooth. Defaults to `0.42 * pitch`. */
+    /** Axial half-width of the tooth at the root. Defaults to `0.42 * pitch`. */
     toothHalfWidth?: number;
+    /**
+     * Axial half-width of a flat crest, giving a trapezoidal tooth instead of a
+     * pointed V. `0` (default) is a sharp V (ISO/UN). Use a positive value for a
+     * power-screw profile: `≈0.18 * pitch` ≈ Acme/trapezoidal, up near
+     * `toothHalfWidth` ≈ square thread. Must be `< toothHalfWidth`.
+     */
+    crest?: number;
     /** Loft sections per turn — higher is smoother but slower. Defaults to `20`. */
     sectionsPerTurn?: number;
     /** Left-handed thread. Defaults to `false` (right-handed). */

package/dist/operations.cjs

@@ -1,6 +1,6 @@
 Object.defineProperty(exports, Symbol.toStringTag, { value: "Module" });
-const require_threadFns = require("./threadFns-p7X2MRCA.cjs");
-const require_loftFns = require("./loftFns-CyrWJCXb.cjs");
+const require_threadFns = require("./threadFns-CvjUrsgG.cjs");
+const require_loftFns = require("./loftFns-BG5aCsSy.cjs");
 exports.addChild = require_threadFns.addChild;
 exports.addJoint = require_threadFns.addJoint;
 exports.addStep = require_threadFns.addStep;

package/dist/operations.js

@@ -1,3 +1,3 @@
-import { A as setJointValue, B as findNode, C as cylindricalJoint, D as planarJoint, E as mechanismDOF, G as gridPattern, H as updateNode, I as addChild, J as createAssembly, K as linearPattern, L as collectShapes, M as sphericalJoint, O as prismaticJoint, R as countNodes, S as addJoint, T as jointTransform, U as walkAssembly, V as removeChild, W as circularPattern, _ as exportURDF, b as inverseKinematics, c as modifyStep, d as replayFrom, f as replayHistory, g as undoLast, h as stepsFrom, i as createRegistry, j as setJointValues, k as revoluteJoint, l as registerOperation, m as stepCount, n as addStep, o as findStep, q as exportAssemblySTEP, r as createHistory, s as getShape, t as thread, u as registerShape, v as importURDF, w as forwardKinematics, x as jointTrajectory, y as jointsFromDH, z as createAssemblyNode } from "./threadFns-YDyX33Wl.js";
-import { d as twistExtrude, l as supportExtrude, o as complexExtrude, u as sweep } from "./loftFns-CxnBxE9h.js";
+import { A as setJointValue, B as findNode, C as cylindricalJoint, D as planarJoint, E as mechanismDOF, G as gridPattern, H as updateNode, I as addChild, J as createAssembly, K as linearPattern, L as collectShapes, M as sphericalJoint, O as prismaticJoint, R as countNodes, S as addJoint, T as jointTransform, U as walkAssembly, V as removeChild, W as circularPattern, _ as exportURDF, b as inverseKinematics, c as modifyStep, d as replayFrom, f as replayHistory, g as undoLast, h as stepsFrom, i as createRegistry, j as setJointValues, k as revoluteJoint, l as registerOperation, m as stepCount, n as addStep, o as findStep, q as exportAssemblySTEP, r as createHistory, s as getShape, t as thread, u as registerShape, v as importURDF, w as forwardKinematics, x as jointTrajectory, y as jointsFromDH, z as createAssemblyNode } from "./threadFns-BcgGRuMg.js";
+import { d as twistExtrude, l as supportExtrude, o as complexExtrude, u as sweep } from "./loftFns-6LL25A5A.js";
 export { addChild, addJoint, addStep, circularPattern, collectShapes, complexExtrude, countNodes, createAssembly, createAssemblyNode, createHistory, createRegistry, cylindricalJoint, exportAssemblySTEP, exportURDF, findNode, findStep, forwardKinematics, getShape as getHistoryShape, gridPattern, importURDF, inverseKinematics, jointTrajectory, jointTransform, jointsFromDH, linearPattern, mechanismDOF, modifyStep, planarJoint, prismaticJoint, registerOperation, registerShape, removeChild, replayFrom, replayHistory, revoluteJoint, setJointValue, setJointValues, sphericalJoint, stepCount, stepsFrom, supportExtrude, sweep, thread, twistExtrude, undoLast, updateNode, walkAssembly };

package/dist/{primitiveFns-DOHI4nuz.js → primitiveFns-CPbjoGeA.js}

@@ -1,9 +1,9 @@
-import { Z as getKernel, c as createSolid, x as isClosedWire } from "./shapeTypes-BIcALNFv.js";
+import { Z as getKernel, c as createSolid, x as isClosedWire } from "./shapeTypes-D9XYNPBs.js";
 import { A as ok, b as err, d as validationError, v as andThen } from "./errors-DNWJsfVU.js";
 import { t as DEG2RAD } from "./constants-ITRzCnCp.js";
-import { h as translate } from "./shapeFns-DGjXjLp_.js";
-import { _ as makeThreePointArc, a as makeNonPlanarFace, c as makeBSplineApproximation, d as makeCircle, f as makeEllipse, g as makeTangentArc, h as makeLine, i as makeNewFaceWithinFace, m as makeHelix, o as makePolygon, p as makeEllipseArc, r as makeFace, s as assembleWire, t as addHolesInFace, u as makeBezierCurve } from "./surfaceBuilders-BQx3TjMH.js";
-import { a as makeOffset, c as makeTorus, i as makeEllipsoid, l as makeVertex, n as makeCone, o as makeSolid, r as makeCylinder, s as makeSphere, t as makeCompound, u as weldShellsAndFaces } from "./solidBuilders-cM4rOTJ5.js";
+import { h as translate } from "./shapeFns-FrRtxWiz.js";
+import { _ as makeThreePointArc, a as makeNonPlanarFace, c as makeBSplineApproximation, d as makeCircle, f as makeEllipse, g as makeTangentArc, h as makeLine, i as makeNewFaceWithinFace, m as makeHelix, o as makePolygon, p as makeEllipseArc, r as makeFace, s as assembleWire, t as addHolesInFace, u as makeBezierCurve } from "./surfaceBuilders-Cf3c00zK.js";
+import { a as makeOffset, c as makeTorus, i as makeEllipsoid, l as makeVertex, n as makeCone, o as makeSolid, r as makeCylinder, s as makeSphere, t as makeCompound, u as weldShellsAndFaces } from "./solidBuilders-CxJJkiPi.js";
 //#region src/topology/primitiveFns.ts
 /**
 * Create a box with the given dimensions.

package/dist/{primitiveFns-BDQodKI0.cjs → primitiveFns-jeA2auqw.cjs}

@@ -1,9 +1,9 @@
-const require_shapeTypes = require("./shapeTypes-DwNTiXjG.cjs");
+const require_shapeTypes = require("./shapeTypes-DplVM8Fy.cjs");
 const require_errors = require("./errors-CXJtc4I7.cjs");
 const require_constants = require("./constants-BOVyEYGH.cjs");
-const require_shapeFns = require("./shapeFns-CqYYHFqr.cjs");
-const require_surfaceBuilders = require("./surfaceBuilders-DvpxHHIm.cjs");
-const require_solidBuilders = require("./solidBuilders-DtK5cc9v.cjs");
+const require_shapeFns = require("./shapeFns-eQx9e6lo.cjs");
+const require_surfaceBuilders = require("./surfaceBuilders-CDrFrFBH.cjs");
+const require_solidBuilders = require("./solidBuilders-DI4CSKe-.cjs");
 //#region src/topology/primitiveFns.ts
 /**
 * Create a box with the given dimensions.

package/dist/projection.cjs

@@ -1,5 +1,5 @@
 Object.defineProperty(exports, Symbol.toStringTag, { value: "Module" });
-const require_cameraFns = require("./cameraFns-IL7qYFaG.cjs");
+const require_cameraFns = require("./cameraFns-BjcKjYpw.cjs");
 exports.PROJECTION_PLANES = require_cameraFns.PROJECTION_PLANES;
 exports.cameraFromPlane = require_cameraFns.cameraFromPlane;
 exports.cameraLookAt = require_cameraFns.cameraLookAt;

package/dist/projection.js

@@ -1,2 +1,2 @@
-import { a as makeProjectedEdges, i as projectEdges, n as cameraLookAt, o as PROJECTION_PLANES, r as createCamera, s as isProjectionPlane, t as cameraFromPlane } from "./cameraFns-BA7CVtWJ.js";
+import { a as makeProjectedEdges, i as projectEdges, n as cameraLookAt, o as PROJECTION_PLANES, r as createCamera, s as isProjectionPlane, t as cameraFromPlane } from "./cameraFns-BCLtAeFB.js";
 export { PROJECTION_PLANES, cameraFromPlane, cameraLookAt, createCamera, isProjectionPlane, makeProjectedEdges, projectEdges };

package/dist/query.cjs

@@ -1,6 +1,6 @@
 Object.defineProperty(exports, Symbol.toStringTag, { value: "Module" });
-const require_helpers = require("./helpers-Bykw93Yc.cjs");
-const require_cornerFinder = require("./cornerFinder-C83MpPRk.cjs");
+const require_helpers = require("./helpers-BVwuuo7f.cjs");
+const require_cornerFinder = require("./cornerFinder-DyYE74wI.cjs");
 exports.cornerFinder = require_cornerFinder.cornerFinder;
 exports.edgeFinder = require_helpers.edgeFinder;
 exports.faceFinder = require_helpers.faceFinder;