brepjs 18.99.5 → 18.100.0

package/dist/brepjs.cjs

@@ -17,7 +17,7 @@ const require_arrayAccess = require("./arrayAccess-e4H9cBfh.cjs");
 const require_surfaceBuilders = require("./surfaceBuilders-DvpxHHIm.cjs");
 const require_solidBuilders = require("./solidBuilders-DtK5cc9v.cjs");
 const require_healingFns = require("./healingFns-CRH5H0ik.cjs");
-const require_threadFns = require("./threadFns-p7X2MRCA.cjs");
+const require_threadFns = require("./threadFns-CNUPl-z6.cjs");
 const require_blueprintSketcher = require("./blueprintSketcher-B7QRguA5.cjs");
 const require_helpers = require("./helpers-Bykw93Yc.cjs");
 const require_drawFns = require("./drawFns-C6K03snv.cjs");

package/dist/brepjs.js

@@ -15,7 +15,7 @@ import { n as getAtOrThrow, r as lastOrThrow, t as firstOrThrow } from "./arrayA
 import { _ as makeThreePointArc, d as makeCircle, h as makeLine, l as makeBSplineInterpolation, n as fill, r as makeFace, s as assembleWire } from "./surfaceBuilders-BQx3TjMH.js";
 import { _ as section$1, b as split$1, d as booleanPipeline, f as cut$2, g as intersect$2, h as fuseAll$2, m as fuse$2, p as cutAll$2, r as makeCylinder, v as sectionToFace$1, y as slice$1 } from "./solidBuilders-cM4rOTJ5.js";
 import { A as edgesOfFace, C as shellWithEvolution, D as getNurbsCurveData, E as fuseAllBisect, F as chamferDistAngle, I as toBufferGeometryData, L as toGroupedBufferGeometryData, M as sharedEdges, N as verticesOfEdge, O as getNurbsSurfaceData, P as wiresOfFace, R as toLODGeometryData, S as intersectWithEvolution, T as cutAllBisect, _ as positionOnCurve, a as healFace, b as filletWithEvolution, c as isValid$1, d as draft$1, f as fillet$1, g as variableFillet, h as thicken$1, i as heal$1, j as facesOfEdge, k as adjacentFaces, l as solidFromShell, m as shell$1, n as fixSelfIntersection, o as healSolid, p as offset$1, r as fixShape, s as healWire, t as autoHeal, u as chamfer$1, v as chamferWithEvolution, w as checkBoolean, x as fuseWithEvolution, y as cutWithEvolution, z as toLineGeometryData } from "./healingFns-jp-NXq1c.js";
-import { A as setJointValue, B as findNode, C as cylindricalJoint, D as planarJoint, E as mechanismDOF, F as quatRotate, H as updateNode, I as addChild, J as createAssembly, K as linearPattern, L as collectShapes, M as sphericalJoint, N as quatFromAxisAngle, O as prismaticJoint, P as quatFromTo, R as countNodes, S as addJoint, T as jointTransform, U as walkAssembly, V as removeChild, W as circularPattern, _ as exportURDF, a as deserializeHistory, b as inverseKinematics, c as modifyStep, d as replayFrom, f as replayHistory, g as undoLast, h as stepsFrom, i as createRegistry, j as setJointValues, k as revoluteJoint, l as registerOperation, m as stepCount, n as addStep, o as findStep, p as serializeHistory, q as exportAssemblySTEP, r as createHistory, s as getShape, t as thread, u as registerShape, v as importURDF, w as forwardKinematics, x as jointTrajectory, y as jointsFromDH, z as createAssemblyNode } from "./threadFns-YDyX33Wl.js";
+import { A as setJointValue, B as findNode, C as cylindricalJoint, D as planarJoint, E as mechanismDOF, F as quatRotate, H as updateNode, I as addChild, J as createAssembly, K as linearPattern, L as collectShapes, M as sphericalJoint, N as quatFromAxisAngle, O as prismaticJoint, P as quatFromTo, R as countNodes, S as addJoint, T as jointTransform, U as walkAssembly, V as removeChild, W as circularPattern, _ as exportURDF, a as deserializeHistory, b as inverseKinematics, c as modifyStep, d as replayFrom, f as replayHistory, g as undoLast, h as stepsFrom, i as createRegistry, j as setJointValues, k as revoluteJoint, l as registerOperation, m as stepCount, n as addStep, o as findStep, p as serializeHistory, q as exportAssemblySTEP, r as createHistory, s as getShape, t as thread, u as registerShape, v as importURDF, w as forwardKinematics, x as jointTrajectory, y as jointsFromDH, z as createAssemblyNode } from "./threadFns-Cdh4WOpx.js";
 import { n as BaseSketcher2d, r as organiseBlueprints, t as BlueprintSketcher } from "./blueprintSketcher-CIsOckAh.js";
 import { a as createTypedFinder, i as wireFinder, n as edgeFinder, r as faceFinder, t as getSingleFace } from "./helpers-mPnUPOIM.js";
 import { A as sketchEllipse, D as makeBaseBox, E as deserializeDrawing, F as sketchRectangle, I as sketchRoundedRectangle, L as FaceSketcher, M as sketchHelix, N as sketchParametricFunction, O as polysideInnerRadius, P as sketchPolysides, R as Sketcher, S as drawText, _ as drawPolysides, a as drawingIntersect, b as drawSingleCircle, c as rotateDrawing, d as drawFaceOutline, f as drawProjection, g as drawPointsInterpolation, h as drawParametricFunction, i as drawingFuse, j as sketchFaceOffset, k as sketchCircle, l as scaleDrawing, m as drawEllipse, n as drawingCut, o as drawingToSketchOnPlane, p as drawCircle, r as drawingFillet, s as mirrorDrawing, t as drawingChamfer, u as translateDrawing, v as drawRectangle, w as draw, x as drawSingleEllipse, y as drawRoundedRectangle } from "./drawFns-D23xqM0C.js";

package/dist/operations/threadFns.d.ts

@@ -10,8 +10,15 @@ export interface ThreadOptions {
     height: number;
     /** Radial thread height (crest minus root). Defaults to `0.6 * pitch` (≈ISO 60° V). */
     depth?: number;
-    /** Axial half-width of the V tooth. Defaults to `0.42 * pitch`. */
+    /** Axial half-width of the tooth at the root. Defaults to `0.42 * pitch`. */
     toothHalfWidth?: number;
+    /**
+     * Axial half-width of a flat crest, giving a trapezoidal tooth instead of a
+     * pointed V. `0` (default) is a sharp V (ISO/UN). Use a positive value for a
+     * power-screw profile: `≈0.18 * pitch` ≈ Acme/trapezoidal, up near
+     * `toothHalfWidth` ≈ square thread. Must be `< toothHalfWidth`.
+     */
+    crest?: number;
     /** Loft sections per turn — higher is smoother but slower. Defaults to `20`. */
     sectionsPerTurn?: number;
     /** Left-handed thread. Defaults to `false` (right-handed). */

package/dist/operations.cjs

@@ -1,5 +1,5 @@
 Object.defineProperty(exports, Symbol.toStringTag, { value: "Module" });
-const require_threadFns = require("./threadFns-p7X2MRCA.cjs");
+const require_threadFns = require("./threadFns-CNUPl-z6.cjs");
 const require_loftFns = require("./loftFns-CyrWJCXb.cjs");
 exports.addChild = require_threadFns.addChild;
 exports.addJoint = require_threadFns.addJoint;

package/dist/operations.js

@@ -1,3 +1,3 @@
-import { A as setJointValue, B as findNode, C as cylindricalJoint, D as planarJoint, E as mechanismDOF, G as gridPattern, H as updateNode, I as addChild, J as createAssembly, K as linearPattern, L as collectShapes, M as sphericalJoint, O as prismaticJoint, R as countNodes, S as addJoint, T as jointTransform, U as walkAssembly, V as removeChild, W as circularPattern, _ as exportURDF, b as inverseKinematics, c as modifyStep, d as replayFrom, f as replayHistory, g as undoLast, h as stepsFrom, i as createRegistry, j as setJointValues, k as revoluteJoint, l as registerOperation, m as stepCount, n as addStep, o as findStep, q as exportAssemblySTEP, r as createHistory, s as getShape, t as thread, u as registerShape, v as importURDF, w as forwardKinematics, x as jointTrajectory, y as jointsFromDH, z as createAssemblyNode } from "./threadFns-YDyX33Wl.js";
+import { A as setJointValue, B as findNode, C as cylindricalJoint, D as planarJoint, E as mechanismDOF, G as gridPattern, H as updateNode, I as addChild, J as createAssembly, K as linearPattern, L as collectShapes, M as sphericalJoint, O as prismaticJoint, R as countNodes, S as addJoint, T as jointTransform, U as walkAssembly, V as removeChild, W as circularPattern, _ as exportURDF, b as inverseKinematics, c as modifyStep, d as replayFrom, f as replayHistory, g as undoLast, h as stepsFrom, i as createRegistry, j as setJointValues, k as revoluteJoint, l as registerOperation, m as stepCount, n as addStep, o as findStep, q as exportAssemblySTEP, r as createHistory, s as getShape, t as thread, u as registerShape, v as importURDF, w as forwardKinematics, x as jointTrajectory, y as jointsFromDH, z as createAssemblyNode } from "./threadFns-Cdh4WOpx.js";
 import { d as twistExtrude, l as supportExtrude, o as complexExtrude, u as sweep } from "./loftFns-CxnBxE9h.js";
 export { addChild, addJoint, addStep, circularPattern, collectShapes, complexExtrude, countNodes, createAssembly, createAssemblyNode, createHistory, createRegistry, cylindricalJoint, exportAssemblySTEP, exportURDF, findNode, findStep, forwardKinematics, getShape as getHistoryShape, gridPattern, importURDF, inverseKinematics, jointTrajectory, jointTransform, jointsFromDH, linearPattern, mechanismDOF, modifyStep, planarJoint, prismaticJoint, registerOperation, registerShape, removeChild, replayFrom, replayHistory, revoluteJoint, setJointValue, setJointValues, sphericalJoint, stepCount, stepsFrom, supportExtrude, sweep, thread, twistExtrude, undoLast, updateNode, walkAssembly };

package/dist/{threadFns-p7X2MRCA.cjs → threadFns-CNUPl-z6.cjs}

@@ -1447,11 +1447,12 @@ function deserializeHistory(data) {
 function thread(options) {
 	try {
 		var _usingCtx$1 = require_shapeTypes._usingCtx();
-		const { radius, pitch, height, depth = .6 * pitch, toothHalfWidth = .42 * pitch, sectionsPerTurn = 20, lefthand = false, inward = false } = options;
+		const { radius, pitch, height, depth = .6 * pitch, toothHalfWidth = .42 * pitch, crest = 0, sectionsPerTurn = 20, lefthand = false, inward = false } = options;
 		if (!(radius > 0)) return require_errors.err(require_errors.validationError("THREAD_INVALID_RADIUS", "radius must be > 0"));
 		if (!(pitch > 0)) return require_errors.err(require_errors.validationError("THREAD_INVALID_PITCH", "pitch must be > 0"));
 		if (!(height > 0)) return require_errors.err(require_errors.validationError("THREAD_INVALID_HEIGHT", "height must be > 0"));
 		if (!(depth > 0)) return require_errors.err(require_errors.validationError("THREAD_INVALID_DEPTH", "depth must be > 0"));
+		if (crest < 0 || crest >= toothHalfWidth) return require_errors.err(require_errors.validationError("THREAD_INVALID_CREST", "crest must be >= 0 and < toothHalfWidth"));
 		if (sectionsPerTurn < 3) return require_errors.err(require_errors.validationError("THREAD_TOO_FEW_SECTIONS", "sectionsPerTurn must be >= 3"));
 		const turns = height / pitch;
 		const nSec = Math.max(2, Math.round(turns * sectionsPerTurn));
@@ -1473,14 +1474,17 @@ function thread(options) {
 				cy + u * ry,
 				z + v
 			];
-			const p1 = pt(baseU, -a);
-			const apex = pt(apexU, 0);
-			const p3 = pt(baseU, a);
-			const w = require_primitiveFns.wire([
-				scope.register(require_primitiveFns.line(p1, apex)),
-				scope.register(require_primitiveFns.line(apex, p3)),
-				scope.register(require_primitiveFns.line(p3, p1))
-			]);
+			const profile = crest > 0 ? [
+				pt(baseU, -a),
+				pt(apexU, -crest),
+				pt(apexU, crest),
+				pt(baseU, a)
+			] : [
+				pt(baseU, -a),
+				pt(apexU, 0),
+				pt(baseU, a)
+			];
+			const w = require_primitiveFns.wire(profile.map((p, k) => scope.register(require_primitiveFns.line(p, profile[(k + 1) % profile.length]))));
 			if (!require_errors.isOk(w)) return w;
 			sections.push(scope.register(w.value));
 		}

package/dist/{threadFns-YDyX33Wl.js → threadFns-Cdh4WOpx.js}

@@ -1447,11 +1447,12 @@ function deserializeHistory(data) {
 function thread(options) {
 	try {
 		var _usingCtx$1 = _usingCtx();
-		const { radius, pitch, height, depth = .6 * pitch, toothHalfWidth = .42 * pitch, sectionsPerTurn = 20, lefthand = false, inward = false } = options;
+		const { radius, pitch, height, depth = .6 * pitch, toothHalfWidth = .42 * pitch, crest = 0, sectionsPerTurn = 20, lefthand = false, inward = false } = options;
 		if (!(radius > 0)) return err(validationError("THREAD_INVALID_RADIUS", "radius must be > 0"));
 		if (!(pitch > 0)) return err(validationError("THREAD_INVALID_PITCH", "pitch must be > 0"));
 		if (!(height > 0)) return err(validationError("THREAD_INVALID_HEIGHT", "height must be > 0"));
 		if (!(depth > 0)) return err(validationError("THREAD_INVALID_DEPTH", "depth must be > 0"));
+		if (crest < 0 || crest >= toothHalfWidth) return err(validationError("THREAD_INVALID_CREST", "crest must be >= 0 and < toothHalfWidth"));
 		if (sectionsPerTurn < 3) return err(validationError("THREAD_TOO_FEW_SECTIONS", "sectionsPerTurn must be >= 3"));
 		const turns = height / pitch;
 		const nSec = Math.max(2, Math.round(turns * sectionsPerTurn));
@@ -1473,14 +1474,17 @@ function thread(options) {
 				cy + u * ry,
 				z + v
 			];
-			const p1 = pt(baseU, -a);
-			const apex = pt(apexU, 0);
-			const p3 = pt(baseU, a);
-			const w = wire([
-				scope.register(line(p1, apex)),
-				scope.register(line(apex, p3)),
-				scope.register(line(p3, p1))
-			]);
+			const profile = crest > 0 ? [
+				pt(baseU, -a),
+				pt(apexU, -crest),
+				pt(apexU, crest),
+				pt(baseU, a)
+			] : [
+				pt(baseU, -a),
+				pt(apexU, 0),
+				pt(baseU, a)
+			];
+			const w = wire(profile.map((p, k) => scope.register(line(p, profile[(k + 1) % profile.length]))));
 			if (!isOk(w)) return w;
 			sections.push(scope.register(w.value));
 		}

package/package.json

@@ -1,6 +1,6 @@
 {
   "name": "brepjs",
-  "version": "18.99.5",
+  "version": "18.100.0",
   "description": "Web CAD library with pluggable geometry kernel",
   "keywords": [
     "cad",