brepjs 18.93.1 → 18.95.0

package/dist/brepjs.cjs

@@ -1,5 +1,5 @@
 Object.defineProperty(exports, Symbol.toStringTag, { value: "Module" });
-const require_textBlueprints = require("./textBlueprints-CKFmYJHD.cjs");
+const require_textBlueprints = require("./textBlueprints-CouQdmgT.cjs");
 const require_shapeTypes = require("./shapeTypes-DwNTiXjG.cjs");
 const require_occtWasmAdapter = require("./occtWasmAdapter-Bv2OTOX9.cjs");
 const require_vec3 = require("./vec3-CFwOI0ZI.cjs");
@@ -17,18 +17,18 @@ const require_arrayAccess = require("./arrayAccess-e4H9cBfh.cjs");
 const require_surfaceBuilders = require("./surfaceBuilders-DvpxHHIm.cjs");
 const require_solidBuilders = require("./solidBuilders-B_5FgvuK.cjs");
 const require_healingFns = require("./healingFns-B1axWCr3.cjs");
-const require_threadFns = require("./threadFns-BsRDNoSm.cjs");
+const require_threadFns = require("./threadFns-Cw02--J3.cjs");
 const require_blueprintSketcher = require("./blueprintSketcher-ChpPo7tq.cjs");
 const require_helpers = require("./helpers-Cvrmxw4s.cjs");
-const require_drawFns = require("./drawFns-C766Umy1.cjs");
+const require_drawFns = require("./drawFns-CAqyimmT.cjs");
 const require_measureFns = require("./measureFns-BtPAmRfH.cjs");
 const require_cornerFinder = require("./cornerFinder-DKyR_u8g.cjs");
 const require_boolean2D = require("./boolean2D-RC6jXv4x.cjs");
 const require_blueprintFns = require("./blueprintFns-Dp0_BOuL.cjs");
 const require_importFns = require("./importFns-D09lb1dB.cjs");
-const require_loftFns = require("./loftFns-C664R57e.cjs");
+const require_loftFns = require("./loftFns-CyrWJCXb.cjs");
 const require_cameraFns = require("./cameraFns-IL7qYFaG.cjs");
-const require_textMetrics = require("./textMetrics-BYHtOFYW.cjs");
+const require_textMetrics = require("./textMetrics-D0bIGN8i.cjs");
 const require_shapeRefFns = require("./shapeRefFns-BsX2j-n3.cjs");
 const require_workerHandler = require("./workerHandler-CdlOTwJg.cjs");
 const require_primitiveFns = require("./primitiveFns-Bdqm8wjI.cjs");
@@ -3553,7 +3553,7 @@ function revolve(face, options) {
 		0,
 		0,
 		1
-	], options?.angle ?? 360);
+	], options?.angle ?? 2 * Math.PI);
 }
 /**
 * Loft through a set of wire profiles to create a 3D shape.

package/dist/brepjs.js

@@ -15,19 +15,19 @@ import { n as getAtOrThrow, r as lastOrThrow, t as firstOrThrow } from "./arrayA
 import { _ as makeThreePointArc, d as makeCircle, h as makeLine, l as makeBSplineInterpolation, n as fill, r as makeFace, s as assembleWire } from "./surfaceBuilders-BQx3TjMH.js";
 import { _ as section$1, b as split$1, d as booleanPipeline, f as cut$2, g as intersect$2, h as fuseAll$2, m as fuse$2, p as cutAll$2, r as makeCylinder, v as sectionToFace$1, y as slice$1 } from "./solidBuilders-Bb5_uC7F.js";
 import { A as edgesOfFace, C as shellWithEvolution, D as getNurbsCurveData, E as fuseAllBisect, F as chamferDistAngle, I as toBufferGeometryData, L as toGroupedBufferGeometryData, M as sharedEdges, N as verticesOfEdge, O as getNurbsSurfaceData, P as wiresOfFace, R as toLODGeometryData, S as intersectWithEvolution, T as cutAllBisect, _ as positionOnCurve, a as healFace, b as filletWithEvolution, c as isValid$1, d as draft$1, f as fillet$1, g as variableFillet, h as thicken$1, i as heal$1, j as facesOfEdge, k as adjacentFaces, l as solidFromShell, m as shell$1, n as fixSelfIntersection, o as healSolid, p as offset$1, r as fixShape, s as healWire, t as autoHeal, u as chamfer$1, v as chamferWithEvolution, w as checkBoolean, x as fuseWithEvolution, y as cutWithEvolution, z as toLineGeometryData } from "./healingFns-Cxi24K_n.js";
-import { A as setJointValue, B as findNode, C as cylindricalJoint, D as planarJoint, E as mechanismDOF, F as quatRotate, H as updateNode, I as addChild, J as createAssembly, K as linearPattern, L as collectShapes, M as sphericalJoint, N as quatFromAxisAngle, O as prismaticJoint, P as quatFromTo, R as countNodes, S as addJoint, T as jointTransform, U as walkAssembly, V as removeChild, W as circularPattern, _ as exportURDF, a as deserializeHistory, b as inverseKinematics, c as modifyStep, d as replayFrom, f as replayHistory, g as undoLast, h as stepsFrom, i as createRegistry, j as setJointValues, k as revoluteJoint, l as registerOperation, m as stepCount, n as addStep, o as findStep, p as serializeHistory, q as exportAssemblySTEP, r as createHistory, s as getShape, t as thread, u as registerShape, v as importURDF, w as forwardKinematics, x as jointTrajectory, y as jointsFromDH, z as createAssemblyNode } from "./threadFns-BWAL8cAZ.js";
+import { A as setJointValue, B as findNode, C as cylindricalJoint, D as planarJoint, E as mechanismDOF, F as quatRotate, H as updateNode, I as addChild, J as createAssembly, K as linearPattern, L as collectShapes, M as sphericalJoint, N as quatFromAxisAngle, O as prismaticJoint, P as quatFromTo, R as countNodes, S as addJoint, T as jointTransform, U as walkAssembly, V as removeChild, W as circularPattern, _ as exportURDF, a as deserializeHistory, b as inverseKinematics, c as modifyStep, d as replayFrom, f as replayHistory, g as undoLast, h as stepsFrom, i as createRegistry, j as setJointValues, k as revoluteJoint, l as registerOperation, m as stepCount, n as addStep, o as findStep, p as serializeHistory, q as exportAssemblySTEP, r as createHistory, s as getShape, t as thread, u as registerShape, v as importURDF, w as forwardKinematics, x as jointTrajectory, y as jointsFromDH, z as createAssemblyNode } from "./threadFns-DdesdIxG.js";
 import { n as BaseSketcher2d, r as organiseBlueprints, t as BlueprintSketcher } from "./blueprintSketcher-CxFmYBvh.js";
 import { a as createTypedFinder, i as wireFinder, n as edgeFinder, r as faceFinder, t as getSingleFace } from "./helpers-CKjmUSf0.js";
-import { A as sketchEllipse, D as makeBaseBox, E as deserializeDrawing, F as sketchRectangle, I as sketchRoundedRectangle, L as FaceSketcher, M as sketchHelix, N as sketchParametricFunction, O as polysideInnerRadius, P as sketchPolysides, R as Sketcher, S as drawText, _ as drawPolysides, a as drawingIntersect, b as drawSingleCircle, c as rotateDrawing, d as drawFaceOutline, f as drawProjection, g as drawPointsInterpolation, h as drawParametricFunction, i as drawingFuse, j as sketchFaceOffset, k as sketchCircle, l as scaleDrawing, m as drawEllipse, n as drawingCut, o as drawingToSketchOnPlane, p as drawCircle, r as drawingFillet, s as mirrorDrawing, t as drawingChamfer, u as translateDrawing, v as drawRectangle, w as draw, x as drawSingleEllipse, y as drawRoundedRectangle } from "./drawFns-C63kOWvC.js";
+import { A as sketchEllipse, D as makeBaseBox, E as deserializeDrawing, F as sketchRectangle, I as sketchRoundedRectangle, L as FaceSketcher, M as sketchHelix, N as sketchParametricFunction, O as polysideInnerRadius, P as sketchPolysides, R as Sketcher, S as drawText, _ as drawPolysides, a as drawingIntersect, b as drawSingleCircle, c as rotateDrawing, d as drawFaceOutline, f as drawProjection, g as drawPointsInterpolation, h as drawParametricFunction, i as drawingFuse, j as sketchFaceOffset, k as sketchCircle, l as scaleDrawing, m as drawEllipse, n as drawingCut, o as drawingToSketchOnPlane, p as drawCircle, r as drawingFillet, s as mirrorDrawing, t as drawingChamfer, u as translateDrawing, v as drawRectangle, w as draw, x as drawSingleEllipse, y as drawRoundedRectangle } from "./drawFns-BKYgyfW4.js";
 import { a as measureDistance, c as measureLinearProps, d as measureVolumeProps, i as measureCurvatureAtMid, l as measureSurfaceProps, n as measureArea, o as measureDistanceProps, r as measureCurvatureAt, s as measureLength, t as createDistanceQuery, u as measureVolume } from "./measureFns-D0e8tGSP.js";
 import { t as cornerFinder } from "./cornerFinder-7M1wdtcY.js";
 import { a as fuseBlueprints, c as roundedRectangleBlueprint, i as cutBlueprints, n as fuse2D, o as intersectBlueprints, r as intersect2D, s as polysidesBlueprint, t as cut2D } from "./boolean2D-CIohnI9l.js";
 import { S as reverseCurve, _ as curve2dIsOnCurve, a as isInside2D, b as curve2dSplitAt, c as scale2D, d as stretch2D, f as toSVGPathD, g as curve2dFirstPoint, h as curve2dDistanceFrom, i as getOrientation2D, l as sketchOnFace2D, m as curve2dBoundingBox, n as createCompoundBlueprint, o as mirror2D, p as translate2D, r as getBounds2D, s as rotate2D, t as createBlueprint, u as sketchOnPlane2D, v as curve2dLastPoint, x as curve2dTangentAt, y as curve2dParameter } from "./blueprintFns-DCA97w4C.js";
 import { a as importSVG, c as blueprintToDXF, d as exportGltf, f as exportOBJ, i as exportSTEPConfigured, l as exportDXF, n as importSTEP, o as importSVGPathD, r as importSTL, s as exportThreeMF, t as importIGES, u as exportGlb } from "./importFns-CDaNqu4H.js";
-import { a as revolve$1, c as multiSectionSweep, d as twistExtrude, i as extrudeAll, l as supportExtrude, n as loftAll, o as complexExtrude, r as extrude$1, s as guidedSweep, t as loft$1, u as sweep$1 } from "./loftFns-C8Ep9McS.js";
-import { a as Sketch, c as compoundSketchLoft, d as sketchFace, f as sketchLoft, h as sketchWires, i as Sketches, l as compoundSketchRevolve, m as sketchSweep, n as getFont, o as compoundSketchExtrude, p as sketchRevolve, r as loadFont, s as compoundSketchFace, t as textBlueprints, u as sketchExtrude, v as CompoundSketch } from "./textBlueprints-CU7MHMR8.js";
+import { a as revolve$1, c as multiSectionSweep, d as twistExtrude, i as extrudeAll, l as supportExtrude, n as loftAll, o as complexExtrude, r as extrude$1, s as guidedSweep, t as loft$1, u as sweep$1 } from "./loftFns-CxnBxE9h.js";
+import { a as Sketch, c as compoundSketchLoft, d as sketchFace, f as sketchLoft, h as sketchWires, i as Sketches, l as compoundSketchRevolve, m as sketchSweep, n as getFont, o as compoundSketchExtrude, p as sketchRevolve, r as loadFont, s as compoundSketchFace, t as textBlueprints, u as sketchExtrude, v as CompoundSketch } from "./textBlueprints-zVMpbHdE.js";
 import { a as makeProjectedEdges, i as projectEdges, n as cameraLookAt, r as createCamera, s as isProjectionPlane, t as cameraFromPlane } from "./cameraFns-BA7CVtWJ.js";
-import { n as textMetrics, r as sketchText, t as fontMetrics } from "./textMetrics-BDTWvvyd.js";
+import { n as textMetrics, r as sketchText, t as fontMetrics } from "./textMetrics-CfsZHNGo.js";
 import { a as updateRoles, i as resolveRef, n as captureHint, o as defaultScorer, r as createRef, t as assignRoles } from "./shapeRefFns-C4JSc_jF.js";
 import { a as createTaskQueue, c as isEmpty$1, d as isDisposeRequest, f as isErrorResponse, h as isSuccessResponse, i as createWorkerClient, l as pendingCount, m as isOperationRequest, n as createWorkerHandler, o as dequeueTask, p as isInitRequest, r as registerHandler, s as enqueueTask, t as createOperationRegistry, u as rejectAll } from "./workerHandler-CFetYgIm.js";
 import { C as threePointArc, D as wireLoop, E as wire, S as tangentArc, T as vertex, _ as polygon, a as circle, b as sphere$1, c as cylinder, d as ellipsoid, f as face, g as offsetFace, h as line, i as bsplineApprox, l as ellipse, m as helix, n as bezier, o as compound, p as filledFace, r as box, s as cone, t as addHoles, u as ellipseArc, v as sewShells, w as torus$1, x as subFace, y as solid } from "./primitiveFns-D7R24hoz.js";
@@ -3557,7 +3557,7 @@ function revolve(face, options) {
 		0,
 		0,
 		1
-	], options?.angle ?? 360);
+	], options?.angle ?? 2 * Math.PI);
 }
 /**
 * Loft through a set of wire profiles to create a 3D shape.

package/dist/{drawFns-C63kOWvC.js → drawFns-BKYgyfW4.js}

@@ -15,7 +15,7 @@ import { _ as samePoint$1, b as subtract2d, c as PRECISION_OFFSET, l as add2d, y
 import { _ as Curve2D, a as edgeToCurve, c as make2dCircle, d as make2dInerpolatedBSplineCurve, f as make2dSegmentCurve, g as approximateAsSvgCompatibleCurve, i as curvesAsEdgesOnPlane, l as make2dEllipse, o as make2dArcFromCenter, t as Blueprint, v as deserializeCurve2D, y as BoundingBox2d } from "./blueprint-BL2TdtBX.js";
 import { t as cornerFinder } from "./cornerFinder-7M1wdtcY.js";
 import { c as roundedRectangleBlueprint, n as fuse2D, r as intersect2D, s as polysidesBlueprint, t as cut2D } from "./boolean2D-CIohnI9l.js";
-import { _ as wrapSketchDataArray, a as Sketch, g as wrapSketchData, i as Sketches, t as textBlueprints } from "./textBlueprints-CU7MHMR8.js";
+import { _ as wrapSketchDataArray, a as Sketch, g as wrapSketchData, i as Sketches, t as textBlueprints } from "./textBlueprints-zVMpbHdE.js";
 import { i as projectEdges, t as cameraFromPlane } from "./cameraFns-BA7CVtWJ.js";
 //#region src/2d/lib/stitching.ts
 /**

package/dist/{drawFns-C766Umy1.cjs → drawFns-CAqyimmT.cjs}

@@ -1,4 +1,4 @@
-const require_textBlueprints = require("./textBlueprints-CKFmYJHD.cjs");
+const require_textBlueprints = require("./textBlueprints-CouQdmgT.cjs");
 const require_shapeTypes = require("./shapeTypes-DwNTiXjG.cjs");
 const require_vec3 = require("./vec3-CFwOI0ZI.cjs");
 const require_errors = require("./errors-CXJtc4I7.cjs");

package/dist/{loftFns-C8Ep9McS.js → loftFns-CxnBxE9h.js}

@@ -309,7 +309,7 @@ function extrude(face, extrusionVec) {
 * @param face - The face to revolve.
 * @param center - A point on the rotation axis. Defaults to the origin.
 * @param direction - Direction vector of the rotation axis. Defaults to Z-up.
-* @param angle - Rotation angle in degrees (0-360). Defaults to a full revolution.
+* @param angle - Rotation angle in **radians**. Defaults to 2π (a full revolution).
 * @returns `Result` containing the revolved 3D shape, or an error if the result is not 3D.
 */
 function revolve(face, center = [
@@ -320,7 +320,7 @@ function revolve(face, center = [
 	0,
 	0,
 	1
-], angle = 360) {
+], angle = 2 * Math.PI) {
 	if (getKernel().isNull(face.wrapped)) return err(validationError(BrepErrorCode.NULL_SHAPE_INPUT, "revolve: face is a null shape"));
 	try {
 		const result = castShape(getKernel().revolveVec(face.wrapped, [...center], [...direction], angle));

package/dist/{loftFns-C664R57e.cjs → loftFns-CyrWJCXb.cjs}

@@ -309,7 +309,7 @@ function extrude(face, extrusionVec) {
 * @param face - The face to revolve.
 * @param center - A point on the rotation axis. Defaults to the origin.
 * @param direction - Direction vector of the rotation axis. Defaults to Z-up.
-* @param angle - Rotation angle in degrees (0-360). Defaults to a full revolution.
+* @param angle - Rotation angle in **radians**. Defaults to 2π (a full revolution).
 * @returns `Result` containing the revolved 3D shape, or an error if the result is not 3D.
 */
 function revolve(face, center = [
@@ -320,7 +320,7 @@ function revolve(face, center = [
 	0,
 	0,
 	1
-], angle = 360) {
+], angle = 2 * Math.PI) {
 	if (require_shapeTypes.getKernel().isNull(face.wrapped)) return require_errors.err(require_errors.validationError(require_errors.BrepErrorCode.NULL_SHAPE_INPUT, "revolve: face is a null shape"));
 	try {
 		const result = require_shapeTypes.castShape(require_shapeTypes.getKernel().revolveVec(face.wrapped, [...center], [...direction], angle));

package/dist/operations/api.d.ts

@@ -20,7 +20,7 @@ export interface RevolveOptions {
     axis?: Vec3;
     /** Pivot point. Default: [0, 0, 0]. */
     at?: Vec3;
-    /** Rotation angle in degrees. Default: 360 (full revolution). */
+    /** Rotation angle in **radians**. Default: 2π (full revolution). */
     angle?: number;
 }
 /**

package/dist/operations/extrudeFns.d.ts

@@ -17,7 +17,7 @@ export declare function extrude(face: OrientedFace<Dimension> & PlanarFace<Dimen
  * @param face - The face to revolve.
  * @param center - A point on the rotation axis. Defaults to the origin.
  * @param direction - Direction vector of the rotation axis. Defaults to Z-up.
- * @param angle - Rotation angle in degrees (0-360). Defaults to a full revolution.
+ * @param angle - Rotation angle in **radians**. Defaults to 2π (a full revolution).
  * @returns `Result` containing the revolved 3D shape, or an error if the result is not 3D.
  */
 export declare function revolve(face: OrientedFace<Dimension> & PlanarFace<Dimension>, center?: Vec3, direction?: Vec3, angle?: number): Result<Shape3D>;

package/dist/operations.cjs

@@ -1,6 +1,6 @@
 Object.defineProperty(exports, Symbol.toStringTag, { value: "Module" });
-const require_threadFns = require("./threadFns-BsRDNoSm.cjs");
-const require_loftFns = require("./loftFns-C664R57e.cjs");
+const require_threadFns = require("./threadFns-Cw02--J3.cjs");
+const require_loftFns = require("./loftFns-CyrWJCXb.cjs");
 exports.addChild = require_threadFns.addChild;
 exports.addJoint = require_threadFns.addJoint;
 exports.addStep = require_threadFns.addStep;

package/dist/operations.js

@@ -1,3 +1,3 @@
-import { A as setJointValue, B as findNode, C as cylindricalJoint, D as planarJoint, E as mechanismDOF, G as gridPattern, H as updateNode, I as addChild, J as createAssembly, K as linearPattern, L as collectShapes, M as sphericalJoint, O as prismaticJoint, R as countNodes, S as addJoint, T as jointTransform, U as walkAssembly, V as removeChild, W as circularPattern, _ as exportURDF, b as inverseKinematics, c as modifyStep, d as replayFrom, f as replayHistory, g as undoLast, h as stepsFrom, i as createRegistry, j as setJointValues, k as revoluteJoint, l as registerOperation, m as stepCount, n as addStep, o as findStep, q as exportAssemblySTEP, r as createHistory, s as getShape, t as thread, u as registerShape, v as importURDF, w as forwardKinematics, x as jointTrajectory, y as jointsFromDH, z as createAssemblyNode } from "./threadFns-BWAL8cAZ.js";
-import { d as twistExtrude, l as supportExtrude, o as complexExtrude, u as sweep } from "./loftFns-C8Ep9McS.js";
+import { A as setJointValue, B as findNode, C as cylindricalJoint, D as planarJoint, E as mechanismDOF, G as gridPattern, H as updateNode, I as addChild, J as createAssembly, K as linearPattern, L as collectShapes, M as sphericalJoint, O as prismaticJoint, R as countNodes, S as addJoint, T as jointTransform, U as walkAssembly, V as removeChild, W as circularPattern, _ as exportURDF, b as inverseKinematics, c as modifyStep, d as replayFrom, f as replayHistory, g as undoLast, h as stepsFrom, i as createRegistry, j as setJointValues, k as revoluteJoint, l as registerOperation, m as stepCount, n as addStep, o as findStep, q as exportAssemblySTEP, r as createHistory, s as getShape, t as thread, u as registerShape, v as importURDF, w as forwardKinematics, x as jointTrajectory, y as jointsFromDH, z as createAssemblyNode } from "./threadFns-DdesdIxG.js";
+import { d as twistExtrude, l as supportExtrude, o as complexExtrude, u as sweep } from "./loftFns-CxnBxE9h.js";
 export { addChild, addJoint, addStep, circularPattern, collectShapes, complexExtrude, countNodes, createAssembly, createAssemblyNode, createHistory, createRegistry, cylindricalJoint, exportAssemblySTEP, exportURDF, findNode, findStep, forwardKinematics, getShape as getHistoryShape, gridPattern, importURDF, inverseKinematics, jointTrajectory, jointTransform, jointsFromDH, linearPattern, mechanismDOF, modifyStep, planarJoint, prismaticJoint, registerOperation, registerShape, removeChild, replayFrom, replayHistory, revoluteJoint, setJointValue, setJointValues, sphericalJoint, stepCount, stepsFrom, supportExtrude, sweep, thread, twistExtrude, undoLast, updateNode, walkAssembly };

package/dist/sketching.cjs

@@ -1,7 +1,7 @@
 Object.defineProperty(exports, Symbol.toStringTag, { value: "Module" });
-const require_textBlueprints = require("./textBlueprints-CKFmYJHD.cjs");
+const require_textBlueprints = require("./textBlueprints-CouQdmgT.cjs");
 const require_blueprintSketcher = require("./blueprintSketcher-ChpPo7tq.cjs");
-const require_drawFns = require("./drawFns-C766Umy1.cjs");
+const require_drawFns = require("./drawFns-CAqyimmT.cjs");
 //#region src/sketching.ts
 /**
 * brepjs/sketching — Sketcher, Drawing, and sketch-to-shape operations.

package/dist/sketching.js

@@ -1,6 +1,6 @@
 import { n as BaseSketcher2d, t as BlueprintSketcher } from "./blueprintSketcher-CxFmYBvh.js";
-import { A as sketchEllipse, C as DrawingPen, D as makeBaseBox, E as deserializeDrawing, F as sketchRectangle, I as sketchRoundedRectangle, L as FaceSketcher, M as sketchHelix, N as sketchParametricFunction, O as polysideInnerRadius, P as sketchPolysides, R as Sketcher, S as drawText, T as Drawing, _ as drawPolysides, a as drawingIntersect, b as drawSingleCircle, c as rotateDrawing, d as drawFaceOutline, f as drawProjection, g as drawPointsInterpolation, h as drawParametricFunction, i as drawingFuse, j as sketchFaceOffset, k as sketchCircle, l as scaleDrawing, m as drawEllipse, n as drawingCut, o as drawingToSketchOnPlane, p as drawCircle, r as drawingFillet, s as mirrorDrawing, t as drawingChamfer, u as translateDrawing, v as drawRectangle, w as draw, x as drawSingleEllipse, y as drawRoundedRectangle } from "./drawFns-C63kOWvC.js";
-import { a as Sketch, c as compoundSketchLoft, d as sketchFace, f as sketchLoft, h as sketchWires, i as Sketches, l as compoundSketchRevolve, m as sketchSweep, o as compoundSketchExtrude, p as sketchRevolve, s as compoundSketchFace, u as sketchExtrude, v as CompoundSketch } from "./textBlueprints-CU7MHMR8.js";
+import { A as sketchEllipse, C as DrawingPen, D as makeBaseBox, E as deserializeDrawing, F as sketchRectangle, I as sketchRoundedRectangle, L as FaceSketcher, M as sketchHelix, N as sketchParametricFunction, O as polysideInnerRadius, P as sketchPolysides, R as Sketcher, S as drawText, T as Drawing, _ as drawPolysides, a as drawingIntersect, b as drawSingleCircle, c as rotateDrawing, d as drawFaceOutline, f as drawProjection, g as drawPointsInterpolation, h as drawParametricFunction, i as drawingFuse, j as sketchFaceOffset, k as sketchCircle, l as scaleDrawing, m as drawEllipse, n as drawingCut, o as drawingToSketchOnPlane, p as drawCircle, r as drawingFillet, s as mirrorDrawing, t as drawingChamfer, u as translateDrawing, v as drawRectangle, w as draw, x as drawSingleEllipse, y as drawRoundedRectangle } from "./drawFns-BKYgyfW4.js";
+import { a as Sketch, c as compoundSketchLoft, d as sketchFace, f as sketchLoft, h as sketchWires, i as Sketches, l as compoundSketchRevolve, m as sketchSweep, o as compoundSketchExtrude, p as sketchRevolve, s as compoundSketchFace, u as sketchExtrude, v as CompoundSketch } from "./textBlueprints-zVMpbHdE.js";
 //#region src/sketching.ts
 /**
 * brepjs/sketching — Sketcher, Drawing, and sketch-to-shape operations.

package/dist/text.cjs

@@ -1,6 +1,6 @@
 Object.defineProperty(exports, Symbol.toStringTag, { value: "Module" });
-const require_textBlueprints = require("./textBlueprints-CKFmYJHD.cjs");
-const require_textMetrics = require("./textMetrics-BYHtOFYW.cjs");
+const require_textBlueprints = require("./textBlueprints-CouQdmgT.cjs");
+const require_textMetrics = require("./textMetrics-D0bIGN8i.cjs");
 exports.fontMetrics = require_textMetrics.fontMetrics;
 exports.getFont = require_textBlueprints.getFont;
 exports.loadFont = require_textBlueprints.loadFont;

package/dist/text.js

@@ -1,3 +1,3 @@
-import { n as getFont, r as loadFont, t as textBlueprints } from "./textBlueprints-CU7MHMR8.js";
-import { n as textMetrics, r as sketchText, t as fontMetrics } from "./textMetrics-BDTWvvyd.js";
+import { n as getFont, r as loadFont, t as textBlueprints } from "./textBlueprints-zVMpbHdE.js";
+import { n as textMetrics, r as sketchText, t as fontMetrics } from "./textMetrics-CfsZHNGo.js";
 export { fontMetrics, getFont, loadFont, sketchText, textBlueprints, textMetrics };

package/dist/{textBlueprints-CKFmYJHD.cjs → textBlueprints-CouQdmgT.cjs}

@@ -40,7 +40,7 @@ const require_arrayAccess = require("./arrayAccess-e4H9cBfh.cjs");
 const require_surfaceBuilders = require("./surfaceBuilders-DvpxHHIm.cjs");
 const require_solidBuilders = require("./solidBuilders-B_5FgvuK.cjs");
 const require_blueprintSketcher = require("./blueprintSketcher-ChpPo7tq.cjs");
-const require_loftFns = require("./loftFns-C664R57e.cjs");
+const require_loftFns = require("./loftFns-CyrWJCXb.cjs");
 let opentype_js = require("opentype.js");
 opentype_js = __toESM(opentype_js, 1);
 //#region src/sketching/compoundSketch.ts

package/dist/{textBlueprints-CU7MHMR8.js → textBlueprints-zVMpbHdE.js}

@@ -9,7 +9,7 @@ import { n as getAtOrThrow, t as firstOrThrow } from "./arrayAccess-DrUGPADn.js"
 import { i as makeNewFaceWithinFace, r as makeFace, t as addHolesInFace } from "./surfaceBuilders-BQx3TjMH.js";
 import { o as makeSolid, p as cutAll, t as makeCompound } from "./solidBuilders-Bb5_uC7F.js";
 import { r as organiseBlueprints, t as BlueprintSketcher } from "./blueprintSketcher-CxFmYBvh.js";
-import { a as revolve, d as twistExtrude, o as complexExtrude, r as extrude, t as loft, u as sweep } from "./loftFns-C8Ep9McS.js";
+import { a as revolve, d as twistExtrude, o as complexExtrude, r as extrude, t as loft, u as sweep } from "./loftFns-CxnBxE9h.js";
 import opentype from "opentype.js";
 //#region src/sketching/compoundSketch.ts
 /**

package/dist/{textMetrics-BDTWvvyd.js → textMetrics-CfsZHNGo.js}

@@ -1,5 +1,5 @@
 import { A as ok, b as err, d as validationError, t as BrepErrorCode } from "./errors-DNWJsfVU.js";
-import { g as wrapSketchData, i as Sketches, n as getFont, t as textBlueprints, v as CompoundSketch } from "./textBlueprints-CU7MHMR8.js";
+import { g as wrapSketchData, i as Sketches, n as getFont, t as textBlueprints, v as CompoundSketch } from "./textBlueprints-zVMpbHdE.js";
 //#region src/text/sketchText.ts
 /**
 * Render text as 3D sketch outlines on a plane.

package/dist/{textMetrics-BYHtOFYW.cjs → textMetrics-D0bIGN8i.cjs}

@@ -1,4 +1,4 @@
-const require_textBlueprints = require("./textBlueprints-CKFmYJHD.cjs");
+const require_textBlueprints = require("./textBlueprints-CouQdmgT.cjs");
 const require_errors = require("./errors-CXJtc4I7.cjs");
 //#region src/text/sketchText.ts
 /**

package/dist/{threadFns-BsRDNoSm.cjs → threadFns-Cw02--J3.cjs}

@@ -4,7 +4,7 @@ const require_vecOps = require("./vecOps-CCnJt-yH.cjs");
 const require_faceFns = require("./faceFns-DSdVqqVP.cjs");
 const require_shapeFns = require("./shapeFns-CeSEceUG.cjs");
 const require_solidBuilders = require("./solidBuilders-B_5FgvuK.cjs");
-const require_loftFns = require("./loftFns-C664R57e.cjs");
+const require_loftFns = require("./loftFns-CyrWJCXb.cjs");
 const require_primitiveFns = require("./primitiveFns-Bdqm8wjI.cjs");
 //#region src/utils/uuid.ts
 /** Generate a v4-style UUID string using `crypto.getRandomValues`. */

package/dist/{threadFns-BWAL8cAZ.js → threadFns-DdesdIxG.js}

@@ -4,7 +4,7 @@ import { d as vecNormalize, s as vecIsZero } from "./vecOps-SKPRvPH-.js";
 import { y as fromBREP } from "./faceFns-CmhEEB-L.js";
 import { s as toBREP } from "./shapeFns-B0lN3o3r.js";
 import { h as fuseAll } from "./solidBuilders-Bb5_uC7F.js";
-import { t as loft } from "./loftFns-C8Ep9McS.js";
+import { t as loft } from "./loftFns-CxnBxE9h.js";
 import { E as wire, h as line } from "./primitiveFns-D7R24hoz.js";
 //#region src/utils/uuid.ts
 /** Generate a v4-style UUID string using `crypto.getRandomValues`. */

package/package.json

@@ -1,6 +1,6 @@
 {
   "name": "brepjs",
-  "version": "18.93.1",
+  "version": "18.95.0",
   "description": "Web CAD library with pluggable geometry kernel",
   "keywords": [
     "cad",
@@ -305,7 +305,7 @@
     "opentype.js": "1.3.4"
   },
   "overrides": {
-    "dompurify": "^3.4.10",
+    "dompurify": "^3.4.11",
     "brace-expansion": "^5.0.6",
     "esbuild@<0.25.0": "^0.25.0",
     "esbuild@>=0.26.0 <0.28.1": "^0.28.1",