brepjs 18.82.4 → 18.82.6

package/dist/brepjs.js

@@ -1,36 +1,36 @@
-import { $ as getKernelCapabilities, A as planarWire, B as createKernelHandle, C as isOrientedFace, D as manifoldShell, E as isValidSolid, F as as3D, H as isLive, I as is2D, J as withScopeResultAsync, K as withScope, L as is3D, M as getShapeKind, O as orientedFace, P as as2D, R as DisposalScope, S as isManifoldShell, T as isPlanarWire, V as getDisposalStats, W as resetDisposalStats, X as getActiveKernelId, Y as _usingCtx, Z as getKernel, _ as isSolid, a as createEdge, at as registerKernel, b as closedWire, c as createSolid, ct as withQuality, d as isCompound, dt as supportsProjection, et as getKernelTier, f as isEdge, ft as BrepkitAdapter, g as isShell, h as isShape3D, ht as currentQuality, i as createCompound, it as prewarm, j as validSolid, k as planarFace, l as createVertex, lt as withTier, m as isShape1D, mt as resetPerformanceStats, n as castShape3D, nt as initFromManifold, o as createFace, ot as registerKernelTier, p as isFace, pt as getPerformanceStats, q as withScopeResult, rt as initFromOC, s as createShell, st as withKernel, t as castShape, tt as init, u as createWire, ut as supportsConstraintSketch, v as isVertex, w as isPlanarFace, x as isClosedWire, y as isWire, z as createHandle } from "./shapeTypes-D4Evnmz_.js";
-import { E as EXACT_BREP_CAPABILITIES, T as DEFAULT_CAPABILITIES, t as OcctWasmAdapter } from "./occtWasmAdapter-BMV179Ji.js";
+import { $ as getKernelCapabilities, A as planarWire, B as createKernelHandle, C as isOrientedFace, D as manifoldShell, E as isValidSolid, F as as3D, H as isLive, I as is2D, J as withScopeResultAsync, K as withScope, L as is3D, M as getShapeKind, O as orientedFace, P as as2D, R as DisposalScope, S as isManifoldShell, T as isPlanarWire, V as getDisposalStats, W as resetDisposalStats, X as getActiveKernelId, Y as _usingCtx, Z as getKernel, _ as isSolid, a as createEdge, at as registerKernel, b as closedWire, c as createSolid, ct as withQuality, d as isCompound, dt as supportsProjection, et as getKernelTier, f as isEdge, ft as BrepkitAdapter, g as isShell, h as isShape3D, ht as currentQuality, i as createCompound, it as prewarm, j as validSolid, k as planarFace, l as createVertex, lt as withTier, m as isShape1D, mt as resetPerformanceStats, n as castShape3D, nt as initFromManifold, o as createFace, ot as registerKernelTier, p as isFace, pt as getPerformanceStats, q as withScopeResult, rt as initFromOC, s as createShell, st as withKernel, t as castShape, tt as init, u as createWire, ut as supportsConstraintSketch, v as isVertex, w as isPlanarFace, x as isClosedWire, y as isWire, z as createHandle } from "./shapeTypes-B8d_6R0X.js";
+import { E as EXACT_BREP_CAPABILITIES, T as DEFAULT_CAPABILITIES, t as OcctWasmAdapter } from "./occtWasmAdapter-BK6h0nKd.js";
 import { n as wasmIndex } from "./vec3-Dpha8d5k.js";
 import { A as ok, B as unwrapOr, C as fromNullable, D as mapBoth, E as map, F as tapErr, H as zip, I as tryCatch, L as tryCatchAsync, M as orElse, N as pipeline, O as mapErr, P as tap, R as unwrap, S as flatten, T as isOk, V as unwrapOrElse, _ as all, a as moduleInitError, b as err, c as sketcherStateError, d as validationError, g as OK, h as bug, i as kernelError, j as or, k as match, l as typeCastError, m as BrepBugError, n as computationError, o as queryError, r as ioError, t as BrepErrorCode, u as unsupportedError, v as andThen, w as isErr, x as flatMap, y as collect, z as unwrapErr } from "./errors-DNWJsfVU.js";
-import { C as kernelCall, S as vertexPosition, T as kernelCallScoped, _ as iterFaces, a as getCachedSurfaceType, b as iterVertices, c as getFaces, d as getSolids, f as getVertices, g as iterEdges, h as iterCompSolids, m as invalidateShapeCache, n as getBounds, o as getCompSolids, p as getWires, s as getEdges, t as describe$1, u as getShells, v as iterShells, w as kernelCallRaw, x as iterWires, y as iterSolids } from "./topologyQueryFns-5EeBz6_7.js";
+import { C as kernelCall, S as vertexPosition, T as kernelCallScoped, _ as iterFaces, a as getCachedSurfaceType, b as iterVertices, c as getFaces, d as getSolids, f as getVertices, g as iterEdges, h as iterCompSolids, m as invalidateShapeCache, n as getBounds, o as getCompSolids, p as getWires, s as getEdges, t as describe$1, u as getShells, v as iterShells, w as kernelCallRaw, x as iterWires, y as iterSolids } from "./topologyQueryFns-BcGLEMvc.js";
 import { n as HASH_CODE_MAX, r as RAD2DEG, t as DEG2RAD } from "./constants-ITRzCnCp.js";
 import { n as toVec2, r as toVec3, t as resolveDirection } from "./types-D24Y27N0.js";
 import { a as vecDot, c as vecLength, d as vecNormalize, f as vecProjectToPlane, g as vecSub, h as vecScale, i as vecDistance, l as vecLengthSq, m as vecRotate, n as vecAngle, o as vecEquals, p as vecRepr, r as vecCross, s as vecIsZero, t as vecAdd, u as vecNegate } from "./vecOps-SKPRvPH-.js";
 import { i as pivotPlane, n as createPlane, o as resolvePlane, r as makePlane, s as translatePlane, t as createNamedPlane } from "./planeOps-DSjjtrjg.js";
-import { S as shapeType, _ as cast, a as faceOrientation, b as isCompSolid, c as innerWires, d as pointOnSurface, f as projectPointOnFace, g as asTopo, h as uvCoordinates, i as faceGeomType, l as normalAt, m as uvBounds, n as faceAxis, o as flipFaceOrientation, p as removeHolesFromFace, r as faceCenter, s as getSurfaceType, t as classifyPointOnFace, u as outerWire, v as downcast, x as iterTopo, y as fromBREP } from "./faceFns-BO8IXhhf.js";
-import { C as findFacesByTag, D as tagFaces, E as setTagMetadata, O as getFaceOrigins, S as getShapeColor, T as getTagMetadata, a as isSameShape, b as colorShape, c as applyMatrix$1, d as resize, f as rotate$2, h as translate$2, i as isEqualShape, k as setShapeOrigin, l as composeTransforms, m as transformCopy$1, n as getHashCode, o as simplify$1, p as scale$3, r as isEmpty$2, s as toBREP$1, t as clone$1, u as mirror$2, w as getFaceTags, x as getFaceColor, y as colorFaces } from "./shapeFns-B6UAiYAx.js";
-import { a as curveIsPeriodic, c as curvePointAt, d as flipOrientation, f as getCurveType, h as offsetWire2D, i as curveIsClosed, l as curveStartPoint, m as interpolateCurve, n as curveAxis, o as curveLength, p as getOrientation, r as curveEndPoint, s as curvePeriod, t as approximateCurve, u as curveTangentAt } from "./curveFns-XSz4F9j3.js";
-import { a as meshEdges$1, c as createMeshCache, i as mesh$1, n as exportSTEP, o as meshMultiLOD, r as exportSTL, s as clearMeshCache, t as exportIGES } from "./meshFns-CWwOpBlM.js";
+import { S as shapeType, _ as cast, a as faceOrientation, b as isCompSolid, c as innerWires, d as pointOnSurface, f as projectPointOnFace, g as asTopo, h as uvCoordinates, i as faceGeomType, l as normalAt, m as uvBounds, n as faceAxis, o as flipFaceOrientation, p as removeHolesFromFace, r as faceCenter, s as getSurfaceType, t as classifyPointOnFace, u as outerWire, v as downcast, x as iterTopo, y as fromBREP } from "./faceFns-4JEna8n9.js";
+import { C as findFacesByTag, D as tagFaces, E as setTagMetadata, O as getFaceOrigins, S as getShapeColor, T as getTagMetadata, a as isSameShape, b as colorShape, c as applyMatrix$1, d as resize, f as rotate$2, h as translate$2, i as isEqualShape, k as setShapeOrigin, l as composeTransforms, m as transformCopy$1, n as getHashCode, o as simplify$1, p as scale$3, r as isEmpty$2, s as toBREP$1, t as clone$1, u as mirror$2, w as getFaceTags, x as getFaceColor, y as colorFaces } from "./shapeFns-B8REDWBf.js";
+import { a as curveIsPeriodic, c as curvePointAt, d as flipOrientation, f as getCurveType, h as offsetWire2D, i as curveIsClosed, l as curveStartPoint, m as interpolateCurve, n as curveAxis, o as curveLength, p as getOrientation, r as curveEndPoint, s as curvePeriod, t as approximateCurve, u as curveTangentAt } from "./curveFns-B4_om-yp.js";
+import { a as meshEdges$1, c as createMeshCache, i as mesh$1, n as exportSTEP, o as meshMultiLOD, r as exportSTL, s as clearMeshCache, t as exportIGES } from "./meshFns-soCHj3jp.js";
 import { n as getAtOrThrow, r as lastOrThrow, t as firstOrThrow } from "./arrayAccess-DrUGPADn.js";
-import { _ as makeThreePointArc, d as makeCircle, h as makeLine, l as makeBSplineInterpolation, n as fill, r as makeFace, s as assembleWire } from "./surfaceBuilders-CLMyFimy.js";
-import { A as cutAll, C as threePointArc, D as wireLoop, E as wire, F as sectionToFace$1, I as slice$1, L as split$1, M as fuseAll, N as intersect$2, O as booleanPipeline, P as section$1, S as tangentArc, T as vertex, _ as polygon, a as circle, b as sphere$1, c as cylinder, d as ellipsoid, f as face, g as offsetFace, h as line, i as bsplineApprox, j as fuse$2, k as cut$2, l as ellipse, m as helix, n as bezier, o as compound, p as filledFace, r as box, s as cone, t as addHoles, u as ellipseArc, v as sewShells, w as torus$1, x as subFace, y as solid } from "./primitiveFns-CjL5bygY.js";
-import { A as edgesOfFace, C as shellWithEvolution, D as getNurbsCurveData, E as fuseAllBisect, F as chamferDistAngle, I as toBufferGeometryData, L as toGroupedBufferGeometryData, M as sharedEdges, N as verticesOfEdge, O as getNurbsSurfaceData, P as wiresOfFace, R as toLODGeometryData, S as intersectWithEvolution, T as cutAllBisect, _ as positionOnCurve, a as healFace, b as filletWithEvolution, c as isValid$1, d as draft$1, f as fillet$1, g as variableFillet, h as thicken$1, i as heal$1, j as facesOfEdge, k as adjacentFaces, l as solidFromShell, m as shell$1, n as fixSelfIntersection, o as healSolid, p as offset$1, r as fixShape, s as healWire, t as autoHeal, u as chamfer$1, v as chamferWithEvolution, w as checkBoolean, x as fuseWithEvolution, y as cutWithEvolution, z as toLineGeometryData } from "./healingFns-Ct_-O3yk.js";
-import { A as setJointValue, B as findNode, C as cylindricalJoint, D as planarJoint, E as mechanismDOF, F as quatRotate, H as updateNode, I as addChild, J as createAssembly, K as linearPattern, L as collectShapes, M as sphericalJoint, N as quatFromAxisAngle, O as prismaticJoint, P as quatFromTo, R as countNodes, S as addJoint, T as jointTransform, U as walkAssembly, V as removeChild, W as circularPattern, _ as exportURDF, a as deserializeHistory, b as inverseKinematics, c as modifyStep, d as replayFrom, f as replayHistory, g as undoLast, h as stepsFrom, i as createRegistry, j as setJointValues, k as revoluteJoint, l as registerOperation, m as stepCount, n as addStep, o as findStep, p as serializeHistory, q as exportAssemblySTEP, r as createHistory, s as getShape, t as thread, u as registerShape, v as importURDF, w as forwardKinematics, x as jointTrajectory, y as jointsFromDH, z as createAssemblyNode } from "./threadFns-DqMbjyxZ.js";
-import { n as BaseSketcher2d, r as organiseBlueprints, t as BlueprintSketcher } from "./blueprintSketcher-CIydRzRr.js";
-import { a as createTypedFinder, i as wireFinder, n as edgeFinder, r as faceFinder, t as getSingleFace } from "./helpers-CTc8ZbY8.js";
-import { A as sketchEllipse, D as makeBaseBox, E as deserializeDrawing, F as sketchRectangle, I as sketchRoundedRectangle, L as FaceSketcher, M as sketchHelix, N as sketchParametricFunction, O as polysideInnerRadius, P as sketchPolysides, R as Sketcher, S as drawText, _ as drawPolysides, a as drawingIntersect, b as drawSingleCircle, c as rotateDrawing, d as drawFaceOutline, f as drawProjection, g as drawPointsInterpolation, h as drawParametricFunction, i as drawingFuse, j as sketchFaceOffset, k as sketchCircle, l as scaleDrawing, m as drawEllipse, n as drawingCut, o as drawingToSketchOnPlane, p as drawCircle, r as drawingFillet, s as mirrorDrawing, t as drawingChamfer, u as translateDrawing, v as drawRectangle, w as draw, x as drawSingleEllipse, y as drawRoundedRectangle } from "./drawFns-DrlxFhe4.js";
-import { r as makeCylinder } from "./solidBuilders-CgPOdC3Q.js";
-import { a as measureDistance, c as measureLinearProps, d as measureVolumeProps, i as measureCurvatureAtMid, l as measureSurfaceProps, n as measureArea, o as measureDistanceProps, r as measureCurvatureAt, s as measureLength, t as createDistanceQuery, u as measureVolume } from "./measureFns-7Nz5JklM.js";
-import { t as cornerFinder } from "./cornerFinder-BRYZAgdE.js";
-import { a as fuseBlueprints, c as roundedRectangleBlueprint, i as cutBlueprints, n as fuse2D, o as intersectBlueprints, r as intersect2D, s as polysidesBlueprint, t as cut2D } from "./boolean2D-BRWPIJhe.js";
-import { S as reverseCurve, _ as curve2dIsOnCurve, a as isInside2D, b as curve2dSplitAt, c as scale2D, d as stretch2D, f as toSVGPathD, g as curve2dFirstPoint, h as curve2dDistanceFrom, i as getOrientation2D, l as sketchOnFace2D, m as curve2dBoundingBox, n as createCompoundBlueprint, o as mirror2D, p as translate2D, r as getBounds2D, s as rotate2D, t as createBlueprint, u as sketchOnPlane2D, v as curve2dLastPoint, x as curve2dTangentAt, y as curve2dParameter } from "./blueprintFns-CxSMnMfl.js";
-import { a as importSVG, c as blueprintToDXF, d as exportGltf, f as exportOBJ, i as exportSTEPConfigured, l as exportDXF, n as importSTEP, o as importSVGPathD, r as importSTL, s as exportThreeMF, t as importIGES, u as exportGlb } from "./importFns-D4Xet5aD.js";
-import { a as revolve$1, c as multiSectionSweep, d as twistExtrude, i as extrudeAll, l as supportExtrude, n as loftAll, o as complexExtrude, r as extrude$1, s as guidedSweep, t as loft$1, u as sweep$1 } from "./loftFns-BVbzy6gm.js";
-import { a as Sketch, c as compoundSketchLoft, d as sketchFace, f as sketchLoft, h as sketchWires, i as Sketches, l as compoundSketchRevolve, m as sketchSweep, n as getFont, o as compoundSketchExtrude, p as sketchRevolve, r as loadFont, s as compoundSketchFace, t as textBlueprints, u as sketchExtrude, v as CompoundSketch } from "./textBlueprints-BJ22J1c2.js";
-import { a as makeProjectedEdges, i as projectEdges, n as cameraLookAt, r as createCamera, s as isProjectionPlane, t as cameraFromPlane } from "./cameraFns-B3Wb4Br9.js";
-import { n as textMetrics, r as sketchText, t as fontMetrics } from "./textMetrics-BrSfzuY6.js";
-import { a as updateRoles, i as resolveRef, n as captureHint, o as defaultScorer, r as createRef, t as assignRoles } from "./shapeRefFns-NdQvPa5J.js";
+import { _ as makeThreePointArc, d as makeCircle, h as makeLine, l as makeBSplineInterpolation, n as fill, r as makeFace, s as assembleWire } from "./surfaceBuilders-D5sQZ6ah.js";
+import { _ as section$1, b as split$1, d as booleanPipeline, f as cut$2, g as intersect$2, h as fuseAll, m as fuse$2, p as cutAll, r as makeCylinder, v as sectionToFace$1, y as slice$1 } from "./solidBuilders-BSnsqitN.js";
+import { A as edgesOfFace, C as shellWithEvolution, D as getNurbsCurveData, E as fuseAllBisect, F as chamferDistAngle, I as toBufferGeometryData, L as toGroupedBufferGeometryData, M as sharedEdges, N as verticesOfEdge, O as getNurbsSurfaceData, P as wiresOfFace, R as toLODGeometryData, S as intersectWithEvolution, T as cutAllBisect, _ as positionOnCurve, a as healFace, b as filletWithEvolution, c as isValid$1, d as draft$1, f as fillet$1, g as variableFillet, h as thicken$1, i as heal$1, j as facesOfEdge, k as adjacentFaces, l as solidFromShell, m as shell$1, n as fixSelfIntersection, o as healSolid, p as offset$1, r as fixShape, s as healWire, t as autoHeal, u as chamfer$1, v as chamferWithEvolution, w as checkBoolean, x as fuseWithEvolution, y as cutWithEvolution, z as toLineGeometryData } from "./healingFns-uXLI1vJ7.js";
+import { A as setJointValue, B as findNode, C as cylindricalJoint, D as planarJoint, E as mechanismDOF, F as quatRotate, H as updateNode, I as addChild, J as createAssembly, K as linearPattern, L as collectShapes, M as sphericalJoint, N as quatFromAxisAngle, O as prismaticJoint, P as quatFromTo, R as countNodes, S as addJoint, T as jointTransform, U as walkAssembly, V as removeChild, W as circularPattern, _ as exportURDF, a as deserializeHistory, b as inverseKinematics, c as modifyStep, d as replayFrom, f as replayHistory, g as undoLast, h as stepsFrom, i as createRegistry, j as setJointValues, k as revoluteJoint, l as registerOperation, m as stepCount, n as addStep, o as findStep, p as serializeHistory, q as exportAssemblySTEP, r as createHistory, s as getShape, t as thread, u as registerShape, v as importURDF, w as forwardKinematics, x as jointTrajectory, y as jointsFromDH, z as createAssemblyNode } from "./threadFns-BQHEnI7a.js";
+import { n as BaseSketcher2d, r as organiseBlueprints, t as BlueprintSketcher } from "./blueprintSketcher-BbYPEPMa.js";
+import { a as createTypedFinder, i as wireFinder, n as edgeFinder, r as faceFinder, t as getSingleFace } from "./helpers-CJV31xig.js";
+import { A as sketchEllipse, D as makeBaseBox, E as deserializeDrawing, F as sketchRectangle, I as sketchRoundedRectangle, L as FaceSketcher, M as sketchHelix, N as sketchParametricFunction, O as polysideInnerRadius, P as sketchPolysides, R as Sketcher, S as drawText, _ as drawPolysides, a as drawingIntersect, b as drawSingleCircle, c as rotateDrawing, d as drawFaceOutline, f as drawProjection, g as drawPointsInterpolation, h as drawParametricFunction, i as drawingFuse, j as sketchFaceOffset, k as sketchCircle, l as scaleDrawing, m as drawEllipse, n as drawingCut, o as drawingToSketchOnPlane, p as drawCircle, r as drawingFillet, s as mirrorDrawing, t as drawingChamfer, u as translateDrawing, v as drawRectangle, w as draw, x as drawSingleEllipse, y as drawRoundedRectangle } from "./drawFns-DaTn2p7M.js";
+import { a as measureDistance, c as measureLinearProps, d as measureVolumeProps, i as measureCurvatureAtMid, l as measureSurfaceProps, n as measureArea, o as measureDistanceProps, r as measureCurvatureAt, s as measureLength, t as createDistanceQuery, u as measureVolume } from "./measureFns-xpevHRLG.js";
+import { t as cornerFinder } from "./cornerFinder-C9zvdkpK.js";
+import { a as fuseBlueprints, c as roundedRectangleBlueprint, i as cutBlueprints, n as fuse2D, o as intersectBlueprints, r as intersect2D, s as polysidesBlueprint, t as cut2D } from "./boolean2D-C3k4iO92.js";
+import { S as reverseCurve, _ as curve2dIsOnCurve, a as isInside2D, b as curve2dSplitAt, c as scale2D, d as stretch2D, f as toSVGPathD, g as curve2dFirstPoint, h as curve2dDistanceFrom, i as getOrientation2D, l as sketchOnFace2D, m as curve2dBoundingBox, n as createCompoundBlueprint, o as mirror2D, p as translate2D, r as getBounds2D, s as rotate2D, t as createBlueprint, u as sketchOnPlane2D, v as curve2dLastPoint, x as curve2dTangentAt, y as curve2dParameter } from "./blueprintFns-DjpRmsbi.js";
+import { a as importSVG, c as blueprintToDXF, d as exportGltf, f as exportOBJ, i as exportSTEPConfigured, l as exportDXF, n as importSTEP, o as importSVGPathD, r as importSTL, s as exportThreeMF, t as importIGES, u as exportGlb } from "./importFns-Dcc2KviL.js";
+import { a as revolve$1, c as multiSectionSweep, d as twistExtrude, i as extrudeAll, l as supportExtrude, n as loftAll, o as complexExtrude, r as extrude$1, s as guidedSweep, t as loft$1, u as sweep$1 } from "./loftFns-DF3KNz9-.js";
+import { a as Sketch, c as compoundSketchLoft, d as sketchFace, f as sketchLoft, h as sketchWires, i as Sketches, l as compoundSketchRevolve, m as sketchSweep, n as getFont, o as compoundSketchExtrude, p as sketchRevolve, r as loadFont, s as compoundSketchFace, t as textBlueprints, u as sketchExtrude, v as CompoundSketch } from "./textBlueprints-Cqu-mcRD.js";
+import { a as makeProjectedEdges, i as projectEdges, n as cameraLookAt, r as createCamera, s as isProjectionPlane, t as cameraFromPlane } from "./cameraFns-BiQGAnPd.js";
+import { n as textMetrics, r as sketchText, t as fontMetrics } from "./textMetrics-Cikow3vH.js";
+import { a as updateRoles, i as resolveRef, n as captureHint, o as defaultScorer, r as createRef, t as assignRoles } from "./shapeRefFns-O5h8bOr9.js";
 import { a as createTaskQueue, c as isEmpty$1, d as isDisposeRequest, f as isErrorResponse, h as isSuccessResponse, i as createWorkerClient, l as pendingCount, m as isOperationRequest, n as createWorkerHandler, o as dequeueTask, p as isInitRequest, r as registerHandler, s as enqueueTask, t as createOperationRegistry, u as rejectAll } from "./workerHandler-CFetYgIm.js";
+import { C as threePointArc, D as wireLoop, E as wire, S as tangentArc, T as vertex, _ as polygon, a as circle, b as sphere$1, c as cylinder, d as ellipsoid, f as face, g as offsetFace, h as line, i as bsplineApprox, l as ellipse, m as helix, n as bezier, o as compound, p as filledFace, r as box, s as cone, t as addHoles, u as ellipseArc, v as sewShells, w as torus$1, x as subFace, y as solid } from "./primitiveFns-BmUIWDC7.js";
 //#region \0rolldown/runtime.js
 var __defProp = Object.defineProperty;
 var __exportAll = (all, no_symbols) => {

package/dist/{cameraFns-B3Wb4Br9.js → cameraFns-BiQGAnPd.js}

@@ -1,6 +1,6 @@
-import { Z as getKernel, t as castShape } from "./shapeTypes-D4Evnmz_.js";
+import { Z as getKernel, t as castShape } from "./shapeTypes-B8d_6R0X.js";
 import { A as ok, b as err, d as validationError } from "./errors-DNWJsfVU.js";
-import { s as getEdges } from "./topologyQueryFns-5EeBz6_7.js";
+import { s as getEdges } from "./topologyQueryFns-BcGLEMvc.js";
 import { c as vecLength, d as vecNormalize, g as vecSub, r as vecCross } from "./vecOps-SKPRvPH-.js";
 //#region src/projection/projectionPlanes.ts
 /** Lookup table mapping each {@link ProjectionPlane} to its camera configuration. */

package/dist/{cameraFns-Drgka78Q.cjs → cameraFns-BkSHm_Vo.cjs}

@@ -1,6 +1,6 @@
-const require_shapeTypes = require("./shapeTypes-D1eUDuzl.cjs");
+const require_shapeTypes = require("./shapeTypes-nFeOa7gQ.cjs");
 const require_errors = require("./errors-CXJtc4I7.cjs");
-const require_topologyQueryFns = require("./topologyQueryFns-Nnu56Ke2.cjs");
+const require_topologyQueryFns = require("./topologyQueryFns-Bhey0q1G.cjs");
 const require_vecOps = require("./vecOps-CCnJt-yH.cjs");
 //#region src/projection/projectionPlanes.ts
 /** Lookup table mapping each {@link ProjectionPlane} to its camera configuration. */

package/dist/core.cjs

@@ -1,5 +1,5 @@
 Object.defineProperty(exports, Symbol.toStringTag, { value: "Module" });
-const require_shapeTypes = require("./shapeTypes-D1eUDuzl.cjs");
+const require_shapeTypes = require("./shapeTypes-nFeOa7gQ.cjs");
 const require_errors = require("./errors-CXJtc4I7.cjs");
 const require_constants = require("./constants-BOVyEYGH.cjs");
 const require_types = require("./types-KjA8tY4Y.cjs");

package/dist/core.js

@@ -1,4 +1,4 @@
-import { B as createKernelHandle, C as isOrientedFace, D as manifoldShell, E as isValidSolid, H as isLive, I as is2D, J as withScopeResultAsync, K as withScope, L as is3D, M as getShapeKind, O as orientedFace, R as DisposalScope, S as isManifoldShell, _ as isSolid, b as closedWire, d as isCompound, f as isEdge, g as isShell, h as isShape3D, j as validSolid, m as isShape1D, p as isFace, q as withScopeResult, t as castShape, v as isVertex, x as isClosedWire, y as isWire, z as createHandle } from "./shapeTypes-D4Evnmz_.js";
+import { B as createKernelHandle, C as isOrientedFace, D as manifoldShell, E as isValidSolid, H as isLive, I as is2D, J as withScopeResultAsync, K as withScope, L as is3D, M as getShapeKind, O as orientedFace, R as DisposalScope, S as isManifoldShell, _ as isSolid, b as closedWire, d as isCompound, f as isEdge, g as isShell, h as isShape3D, j as validSolid, m as isShape1D, p as isFace, q as withScopeResult, t as castShape, v as isVertex, x as isClosedWire, y as isWire, z as createHandle } from "./shapeTypes-B8d_6R0X.js";
 import { A as ok, B as unwrapOr, E as map, I as tryCatch, L as tryCatchAsync, O as mapErr, R as unwrap, T as isOk, V as unwrapOrElse, a as moduleInitError, b as err, c as sketcherStateError, d as validationError, g as OK, h as bug, i as kernelError, k as match, l as typeCastError, m as BrepBugError, n as computationError, o as queryError, r as ioError, u as unsupportedError, v as andThen, w as isErr, x as flatMap, y as collect, z as unwrapErr } from "./errors-DNWJsfVU.js";
 import { n as HASH_CODE_MAX, r as RAD2DEG, t as DEG2RAD } from "./constants-ITRzCnCp.js";
 import { n as toVec2, r as toVec3, t as resolveDirection } from "./types-D24Y27N0.js";

package/dist/{cornerFinder-BRYZAgdE.js → cornerFinder-C9zvdkpK.js}

@@ -1,6 +1,6 @@
 import { t as DEG2RAD } from "./constants-ITRzCnCp.js";
 import { n as getAtOrThrow } from "./arrayAccess-DrUGPADn.js";
-import { _ as samePoint, p as distance2d, u as angle2d } from "./helpers-CTc8ZbY8.js";
+import { _ as samePoint, p as distance2d, u as angle2d } from "./helpers-CJV31xig.js";
 //#region src/query/cornerFinder.ts
 var PI_2 = 2 * Math.PI;
 function positiveHalfAngle(angle) {

package/dist/{cornerFinder-BuYpqGO8.cjs → cornerFinder-D3lGL_Td.cjs}

@@ -1,6 +1,6 @@
 const require_constants = require("./constants-BOVyEYGH.cjs");
 const require_arrayAccess = require("./arrayAccess-e4H9cBfh.cjs");
-const require_helpers = require("./helpers-DN6s-TLC.cjs");
+const require_helpers = require("./helpers-rAK5qEBu.cjs");
 //#region src/query/cornerFinder.ts
 var PI_2 = 2 * Math.PI;
 function positiveHalfAngle(angle) {

package/dist/{curveFns-XSz4F9j3.js → curveFns-B4_om-yp.js}

@@ -1,4 +1,4 @@
-import { Z as getKernel, f as isEdge, t as castShape, y as isWire } from "./shapeTypes-D4Evnmz_.js";
+import { Z as getKernel, f as isEdge, t as castShape, y as isWire } from "./shapeTypes-B8d_6R0X.js";
 import { A as ok, b as err, l as typeCastError } from "./errors-DNWJsfVU.js";
 //#region src/topology/curveFns.ts
 /**

package/dist/{curveFns-BA5zsoce.cjs → curveFns-Dlbfncal.cjs}

@@ -1,4 +1,4 @@
-const require_shapeTypes = require("./shapeTypes-D1eUDuzl.cjs");
+const require_shapeTypes = require("./shapeTypes-nFeOa7gQ.cjs");
 const require_errors = require("./errors-CXJtc4I7.cjs");
 //#region src/topology/curveFns.ts
 /**

package/dist/{drawFns-DrlxFhe4.js → drawFns-DaTn2p7M.js}

@@ -1,22 +1,22 @@
-import { R as DisposalScope, Y as _usingCtx, Z as getKernel, a as createEdge, o as createFace, u as createWire } from "./shapeTypes-D4Evnmz_.js";
+import { R as DisposalScope, Y as _usingCtx, Z as getKernel, a as createEdge, o as createFace, u as createWire } from "./shapeTypes-B8d_6R0X.js";
 import { n as wasmIndex } from "./vec3-Dpha8d5k.js";
 import { R as unwrap, h as bug, s as safeIndex } from "./errors-DNWJsfVU.js";
-import { s as getEdges } from "./topologyQueryFns-5EeBz6_7.js";
+import { s as getEdges } from "./topologyQueryFns-BcGLEMvc.js";
 import { t as DEG2RAD } from "./constants-ITRzCnCp.js";
 import { r as toVec3 } from "./types-D24Y27N0.js";
 import { d as vecNormalize, g as vecSub, h as vecScale, m as vecRotate, r as vecCross } from "./vecOps-SKPRvPH-.js";
 import { a as planeToWorld, o as resolvePlane } from "./planeOps-DSjjtrjg.js";
-import { d as pointOnSurface, l as normalAt, m as uvBounds, r as faceCenter, u as outerWire, v as downcast } from "./faceFns-BO8IXhhf.js";
-import { h as offsetWire2D, i as curveIsClosed, l as curveStartPoint } from "./curveFns-XSz4F9j3.js";
+import { d as pointOnSurface, l as normalAt, m as uvBounds, r as faceCenter, u as outerWire, v as downcast } from "./faceFns-4JEna8n9.js";
+import { h as offsetWire2D, i as curveIsClosed, l as curveStartPoint } from "./curveFns-B4_om-yp.js";
 import { n as getAtOrThrow, r as lastOrThrow, t as firstOrThrow } from "./arrayAccess-DrUGPADn.js";
-import { c as makeBSplineApproximation, d as makeCircle, f as makeEllipse, m as makeHelix, r as makeFace, s as assembleWire } from "./surfaceBuilders-CLMyFimy.js";
-import { a as Blueprints, c as make2dOffset, i as CompoundBlueprint, l as intersectCurves, n as BaseSketcher2d, o as chamferCurves, s as filletCurves, u as Flatbush } from "./blueprintSketcher-CIydRzRr.js";
-import { _ as samePoint$1, b as subtract2d, c as PRECISION_OFFSET, l as add2d, y as squareDistance2d } from "./helpers-CTc8ZbY8.js";
-import { _ as Curve2D, a as edgeToCurve, c as make2dCircle, d as make2dInerpolatedBSplineCurve, f as make2dSegmentCurve, g as approximateAsSvgCompatibleCurve, i as curvesAsEdgesOnPlane, l as make2dEllipse, o as make2dArcFromCenter, t as Blueprint, v as deserializeCurve2D, y as BoundingBox2d } from "./blueprint-DjzevNhB.js";
-import { t as cornerFinder } from "./cornerFinder-BRYZAgdE.js";
-import { c as roundedRectangleBlueprint, n as fuse2D, r as intersect2D, s as polysidesBlueprint, t as cut2D } from "./boolean2D-BRWPIJhe.js";
-import { _ as wrapSketchDataArray, a as Sketch, g as wrapSketchData, i as Sketches, t as textBlueprints } from "./textBlueprints-BJ22J1c2.js";
-import { i as projectEdges, t as cameraFromPlane } from "./cameraFns-B3Wb4Br9.js";
+import { c as makeBSplineApproximation, d as makeCircle, f as makeEllipse, m as makeHelix, r as makeFace, s as assembleWire } from "./surfaceBuilders-D5sQZ6ah.js";
+import { a as Blueprints, c as make2dOffset, i as CompoundBlueprint, l as intersectCurves, n as BaseSketcher2d, o as chamferCurves, s as filletCurves, u as Flatbush } from "./blueprintSketcher-BbYPEPMa.js";
+import { _ as samePoint$1, b as subtract2d, c as PRECISION_OFFSET, l as add2d, y as squareDistance2d } from "./helpers-CJV31xig.js";
+import { _ as Curve2D, a as edgeToCurve, c as make2dCircle, d as make2dInerpolatedBSplineCurve, f as make2dSegmentCurve, g as approximateAsSvgCompatibleCurve, i as curvesAsEdgesOnPlane, l as make2dEllipse, o as make2dArcFromCenter, t as Blueprint, v as deserializeCurve2D, y as BoundingBox2d } from "./blueprint-yJsyEFn_.js";
+import { t as cornerFinder } from "./cornerFinder-C9zvdkpK.js";
+import { c as roundedRectangleBlueprint, n as fuse2D, r as intersect2D, s as polysidesBlueprint, t as cut2D } from "./boolean2D-C3k4iO92.js";
+import { _ as wrapSketchDataArray, a as Sketch, g as wrapSketchData, i as Sketches, t as textBlueprints } from "./textBlueprints-Cqu-mcRD.js";
+import { i as projectEdges, t as cameraFromPlane } from "./cameraFns-BiQGAnPd.js";
 //#region src/2d/lib/stitching.ts
 /**
 * Group a flat list of curves into connected chains by matching endpoints.

package/dist/{drawFns-CmSMHb12.cjs → drawFns-lls9IuPY.cjs}

@@ -1,22 +1,22 @@
-const require_textBlueprints = require("./textBlueprints-BjSwFtO2.cjs");
-const require_shapeTypes = require("./shapeTypes-D1eUDuzl.cjs");
+const require_textBlueprints = require("./textBlueprints-BwRqV98S.cjs");
+const require_shapeTypes = require("./shapeTypes-nFeOa7gQ.cjs");
 const require_vec3 = require("./vec3-CFwOI0ZI.cjs");
 const require_errors = require("./errors-CXJtc4I7.cjs");
-const require_topologyQueryFns = require("./topologyQueryFns-Nnu56Ke2.cjs");
+const require_topologyQueryFns = require("./topologyQueryFns-Bhey0q1G.cjs");
 const require_constants = require("./constants-BOVyEYGH.cjs");
 const require_types = require("./types-KjA8tY4Y.cjs");
 const require_vecOps = require("./vecOps-CCnJt-yH.cjs");
 const require_planeOps = require("./planeOps-BA4HfgQu.cjs");
-const require_faceFns = require("./faceFns-6AarivqH.cjs");
-const require_curveFns = require("./curveFns-BA5zsoce.cjs");
+const require_faceFns = require("./faceFns-Obtamglc.cjs");
+const require_curveFns = require("./curveFns-Dlbfncal.cjs");
 const require_arrayAccess = require("./arrayAccess-e4H9cBfh.cjs");
-const require_surfaceBuilders = require("./surfaceBuilders-R4DKNFkI.cjs");
-const require_blueprintSketcher = require("./blueprintSketcher-CFa32JZU.cjs");
-const require_helpers = require("./helpers-DN6s-TLC.cjs");
-const require_blueprint = require("./blueprint-BBUOweQy.cjs");
-const require_cornerFinder = require("./cornerFinder-BuYpqGO8.cjs");
-const require_boolean2D = require("./boolean2D-Z0KE98a4.cjs");
-const require_cameraFns = require("./cameraFns-Drgka78Q.cjs");
+const require_surfaceBuilders = require("./surfaceBuilders-CDX6sDZz.cjs");
+const require_blueprintSketcher = require("./blueprintSketcher-BLXntEIS.cjs");
+const require_helpers = require("./helpers-rAK5qEBu.cjs");
+const require_blueprint = require("./blueprint-C2gkyxYc.cjs");
+const require_cornerFinder = require("./cornerFinder-D3lGL_Td.cjs");
+const require_boolean2D = require("./boolean2D-BbvyYF-v.cjs");
+const require_cameraFns = require("./cameraFns-BkSHm_Vo.cjs");
 //#region src/2d/lib/stitching.ts
 /**
 * Group a flat list of curves into connected chains by matching endpoints.

package/dist/{faceFns-BO8IXhhf.js → faceFns-4JEna8n9.js}

@@ -1,6 +1,6 @@
-import { Z as getKernel, t as castShape } from "./shapeTypes-D4Evnmz_.js";
+import { Z as getKernel, t as castShape } from "./shapeTypes-B8d_6R0X.js";
 import { A as ok, R as unwrap, b as err, l as typeCastError } from "./errors-DNWJsfVU.js";
-import { a as getCachedSurfaceType } from "./topologyQueryFns-5EeBz6_7.js";
+import { a as getCachedSurfaceType } from "./topologyQueryFns-BcGLEMvc.js";
 import { r as toVec3 } from "./types-D24Y27N0.js";
 //#region src/topology/cast.ts
 var TOPO_ENUM = {

package/dist/{faceFns-6AarivqH.cjs → faceFns-Obtamglc.cjs}

@@ -1,6 +1,6 @@
-const require_shapeTypes = require("./shapeTypes-D1eUDuzl.cjs");
+const require_shapeTypes = require("./shapeTypes-nFeOa7gQ.cjs");
 const require_errors = require("./errors-CXJtc4I7.cjs");
-const require_topologyQueryFns = require("./topologyQueryFns-Nnu56Ke2.cjs");
+const require_topologyQueryFns = require("./topologyQueryFns-Bhey0q1G.cjs");
 const require_types = require("./types-KjA8tY4Y.cjs");
 //#region src/topology/cast.ts
 var TOPO_ENUM = {

package/dist/{healingFns-MxlhdTIc.cjs → healingFns-gHxvhsbJ.cjs}

@@ -1,11 +1,11 @@
-const require_shapeTypes = require("./shapeTypes-D1eUDuzl.cjs");
+const require_shapeTypes = require("./shapeTypes-nFeOa7gQ.cjs");
 const require_errors = require("./errors-CXJtc4I7.cjs");
-const require_topologyQueryFns = require("./topologyQueryFns-Nnu56Ke2.cjs");
+const require_topologyQueryFns = require("./topologyQueryFns-Bhey0q1G.cjs");
 const require_constants = require("./constants-BOVyEYGH.cjs");
-const require_faceFns = require("./faceFns-6AarivqH.cjs");
-const require_shapeFns = require("./shapeFns-sF0x5Zhj.cjs");
+const require_faceFns = require("./faceFns-Obtamglc.cjs");
+const require_shapeFns = require("./shapeFns-CE6c_4D4.cjs");
 const require_arrayAccess = require("./arrayAccess-e4H9cBfh.cjs");
-const require_primitiveFns = require("./primitiveFns-LWkd7M2f.cjs");
+const require_solidBuilders = require("./solidBuilders-DfGIPlQ2.cjs");
 //#region src/topology/threeHelpers.ts
 /**
 * Convert a ShapeMesh into BufferGeometry-compatible typed arrays.
@@ -336,10 +336,10 @@ function getNurbsSurfaceData(face) {
 //#endregion
 //#region src/topology/booleanBatchFns.ts
 var REAL_OPS = {
-	cut: require_primitiveFns.cut,
-	cutAll: require_primitiveFns.cutAll,
-	fuse: require_primitiveFns.fuse,
-	fuseAll: require_primitiveFns.fuseAll
+	cut: require_solidBuilders.cut,
+	cutAll: require_solidBuilders.cutAll,
+	fuse: require_solidBuilders.fuse,
+	fuseAll: require_solidBuilders.fuseAll
 };
 function freezeTelemetry(t) {
 	return {

package/dist/{healingFns-Ct_-O3yk.js → healingFns-uXLI1vJ7.js}

@@ -1,11 +1,11 @@
-import { Z as getKernel, _ as isSolid, h as isShape3D, p as isFace, r as castShapeWithKnownType, t as castShape, y as isWire } from "./shapeTypes-D4Evnmz_.js";
+import { Z as getKernel, _ as isSolid, h as isShape3D, p as isFace, r as castShapeWithKnownType, t as castShape, y as isWire } from "./shapeTypes-B8d_6R0X.js";
 import { A as ok, T as isOk, b as err, d as validationError, i as kernelError, l as typeCastError, t as BrepErrorCode, w as isErr } from "./errors-DNWJsfVU.js";
-import { c as getFaces, i as getCachedIsValid, l as getOrCreateCache, m as invalidateShapeCache, p as getWires, s as getEdges } from "./topologyQueryFns-5EeBz6_7.js";
+import { c as getFaces, i as getCachedIsValid, l as getOrCreateCache, m as invalidateShapeCache, p as getWires, s as getEdges } from "./topologyQueryFns-BcGLEMvc.js";
 import { n as HASH_CODE_MAX } from "./constants-ITRzCnCp.js";
-import { v as downcast } from "./faceFns-BO8IXhhf.js";
-import { _ as propagateAllMetadata, g as collectInputFaceHashes } from "./shapeFns-B6UAiYAx.js";
+import { v as downcast } from "./faceFns-4JEna8n9.js";
+import { _ as propagateAllMetadata, g as collectInputFaceHashes } from "./shapeFns-B8REDWBf.js";
 import { t as firstOrThrow } from "./arrayAccess-DrUGPADn.js";
-import { A as cutAll, M as fuseAll, j as fuse, k as cut } from "./primitiveFns-CjL5bygY.js";
+import { f as cut, h as fuseAll, m as fuse, p as cutAll } from "./solidBuilders-BSnsqitN.js";
 //#region src/topology/threeHelpers.ts
 /**
 * Convert a ShapeMesh into BufferGeometry-compatible typed arrays.

package/dist/{helpers-CTc8ZbY8.js → helpers-CJV31xig.js}

@@ -1,12 +1,12 @@
-import { Z as getKernel, p as isFace } from "./shapeTypes-D4Evnmz_.js";
+import { Z as getKernel, p as isFace } from "./shapeTypes-B8d_6R0X.js";
 import { A as ok, T as isOk, b as err, h as bug, o as queryError } from "./errors-DNWJsfVU.js";
-import { c as getFaces, f as getVertices, p as getWires, s as getEdges } from "./topologyQueryFns-5EeBz6_7.js";
+import { c as getFaces, f as getVertices, p as getWires, s as getEdges } from "./topologyQueryFns-BcGLEMvc.js";
 import { t as DEG2RAD } from "./constants-ITRzCnCp.js";
 import { a as vecDot, d as vecNormalize } from "./vecOps-SKPRvPH-.js";
-import { l as normalAt, s as getSurfaceType } from "./faceFns-BO8IXhhf.js";
-import { a as isSameShape, n as getHashCode } from "./shapeFns-B6UAiYAx.js";
-import { f as getCurveType, i as curveIsClosed, o as curveLength } from "./curveFns-XSz4F9j3.js";
-import { n as measureArea } from "./measureFns-7Nz5JklM.js";
+import { l as normalAt, s as getSurfaceType } from "./faceFns-4JEna8n9.js";
+import { a as isSameShape, n as getHashCode } from "./shapeFns-B8REDWBf.js";
+import { f as getCurveType, i as curveIsClosed, o as curveLength } from "./curveFns-B4_om-yp.js";
+import { n as measureArea } from "./measureFns-xpevHRLG.js";
 //#region src/utils/vec2d.ts
 /** Precision for curve intersection and parameter operations. */
 var PRECISION_INTERSECTION = 1e-9;

package/dist/{helpers-DN6s-TLC.cjs → helpers-rAK5qEBu.cjs}

@@ -1,12 +1,12 @@
-const require_shapeTypes = require("./shapeTypes-D1eUDuzl.cjs");
+const require_shapeTypes = require("./shapeTypes-nFeOa7gQ.cjs");
 const require_errors = require("./errors-CXJtc4I7.cjs");
-const require_topologyQueryFns = require("./topologyQueryFns-Nnu56Ke2.cjs");
+const require_topologyQueryFns = require("./topologyQueryFns-Bhey0q1G.cjs");
 const require_constants = require("./constants-BOVyEYGH.cjs");
 const require_vecOps = require("./vecOps-CCnJt-yH.cjs");
-const require_faceFns = require("./faceFns-6AarivqH.cjs");
-const require_shapeFns = require("./shapeFns-sF0x5Zhj.cjs");
-const require_curveFns = require("./curveFns-BA5zsoce.cjs");
-const require_measureFns = require("./measureFns-BNHvjShh.cjs");
+const require_faceFns = require("./faceFns-Obtamglc.cjs");
+const require_shapeFns = require("./shapeFns-CE6c_4D4.cjs");
+const require_curveFns = require("./curveFns-Dlbfncal.cjs");
+const require_measureFns = require("./measureFns-Ym_I522s.cjs");
 //#region src/utils/vec2d.ts
 /** Precision for curve intersection and parameter operations. */
 var PRECISION_INTERSECTION = 1e-9;

package/dist/{importFns-Cb-cmpGG.cjs → importFns-BJVEly-l.cjs}

@@ -1,8 +1,8 @@
-const require_shapeTypes = require("./shapeTypes-D1eUDuzl.cjs");
+const require_shapeTypes = require("./shapeTypes-nFeOa7gQ.cjs");
 const require_vec3 = require("./vec3-CFwOI0ZI.cjs");
 const require_errors = require("./errors-CXJtc4I7.cjs");
 const require_arrayAccess = require("./arrayAccess-e4H9cBfh.cjs");
-const require_blueprint = require("./blueprint-BBUOweQy.cjs");
+const require_blueprint = require("./blueprint-C2gkyxYc.cjs");
 //#region src/io/objExportFns.ts
 /** Read a vec3 from a typed array at the given vertex index. */
 function vec3At(arr, i) {

package/dist/{importFns-D4Xet5aD.js → importFns-Dcc2KviL.js}

@@ -1,8 +1,8 @@
-import { Z as getKernel, t as castShape } from "./shapeTypes-D4Evnmz_.js";
+import { Z as getKernel, t as castShape } from "./shapeTypes-B8d_6R0X.js";
 import { n as wasmIndex, t as vec3At$1 } from "./vec3-Dpha8d5k.js";
 import { A as ok, b as err, r as ioError, t as BrepErrorCode } from "./errors-DNWJsfVU.js";
 import { n as getAtOrThrow } from "./arrayAccess-DrUGPADn.js";
-import { f as make2dSegmentCurve, m as make2dThreePointArc, s as make2dBezierCurve, t as Blueprint } from "./blueprint-DjzevNhB.js";
+import { f as make2dSegmentCurve, m as make2dThreePointArc, s as make2dBezierCurve, t as Blueprint } from "./blueprint-yJsyEFn_.js";
 //#region src/io/objExportFns.ts
 /** Read a vec3 from a typed array at the given vertex index. */
 function vec3At(arr, i) {

package/dist/io.cjs

@@ -1,6 +1,6 @@
 Object.defineProperty(exports, Symbol.toStringTag, { value: "Module" });
-const require_meshFns = require("./meshFns-YXFipjjx.cjs");
-const require_importFns = require("./importFns-Cb-cmpGG.cjs");
+const require_meshFns = require("./meshFns-DDhKhVK0.cjs");
+const require_importFns = require("./importFns-BJVEly-l.cjs");
 exports.blueprintToDXF = require_importFns.blueprintToDXF;
 exports.exportDXF = require_importFns.exportDXF;
 exports.exportGlb = require_importFns.exportGlb;

package/dist/io.js

@@ -1,3 +1,3 @@
-import { n as exportSTEP, r as exportSTL, t as exportIGES } from "./meshFns-CWwOpBlM.js";
-import { a as importSVG, c as blueprintToDXF, d as exportGltf, f as exportOBJ, i as exportSTEPConfigured, l as exportDXF, n as importSTEP, o as importSVGPathD, r as importSTL, s as exportThreeMF, t as importIGES, u as exportGlb } from "./importFns-D4Xet5aD.js";
+import { n as exportSTEP, r as exportSTL, t as exportIGES } from "./meshFns-soCHj3jp.js";
+import { a as importSVG, c as blueprintToDXF, d as exportGltf, f as exportOBJ, i as exportSTEPConfigured, l as exportDXF, n as importSTEP, o as importSVGPathD, r as importSTL, s as exportThreeMF, t as importIGES, u as exportGlb } from "./importFns-Dcc2KviL.js";
 export { blueprintToDXF, exportDXF, exportGlb, exportGltf, exportIGES, exportOBJ, exportSTEP, exportSTEPConfigured, exportSTL, exportThreeMF, importIGES, importSTEP, importSTL, importSVG, importSVGPathD };

package/dist/kernel/brepkit/brepkitWasmTypes.d.ts

@@ -2,7 +2,7 @@
  * Type-safe interface for the brepkit WASM kernel (`BrepKernel`).
  *
  * AUTO-GENERATED by `npm run sync:brepkit-types`.
- * Synced against `brepkit-wasm@2.101.2`.
+ * Synced against `brepkit-wasm@2.104.1`.
  *
  * Methods not yet referenced in the adapter layer are tagged `@unwired`.
  *
@@ -215,7 +215,9 @@ export interface BrepkitKernel {
     meshEdgesAll(solid: number, deflection: number): BrepkitEdgeLines;
     meshBoolean(positionsA: Float64Array | number[], indicesA: Uint32Array | number[], positionsB: Float64Array | number[], indicesB: Uint32Array | number[], op: string, tolerance: number): BrepkitMesh;
     exportStep(solid: number): Uint8Array;
+    /** @unwired */
     exportStl(solid: number, deflection: number): Uint8Array;
+    /** @unwired */
     exportStlAscii(solid: number, deflection: number): Uint8Array;
     exportIges(solid: number): Uint8Array;
     export3mf(solid: number, deflection: number): Uint8Array;
@@ -286,6 +288,8 @@ export interface BrepkitKernel {
     /** @unwired */
     getNurbsSurfaceData(face: number): string;
     getNurbsSurfaceDataParity(face: number): string;
+    /** @unwired */
+    getSolidShells(solid: number): Uint32Array;
     makeCircleEdge(cx: number, cy: number, cz: number, nx: number, ny: number, nz: number, radius: number): number;
     /** @unwired */
     makeCircleEdgeWithRef(cx: number, cy: number, cz: number, nx: number, ny: number, nz: number, radius: number, rx: number, ry: number, rz: number): number;
@@ -298,15 +302,15 @@ export interface BrepkitKernel {
     /** @unwired */
     toBrepJson(solid: number): string;
     transformFace(face: number, matrix: Float64Array | number[]): void;
-    /** @future Not in brepkit-wasm 2.101.2. Referenced with feature detection in adapter. */
+    /** @future Not in brepkit-wasm 2.104.1. Referenced with feature detection in adapter. */
     chamferAsymmetric?(solid: number, edgeHandles: Uint32Array | number[], d1: number, d2: number): number;
-    /** @future Not in brepkit-wasm 2.101.2. Referenced with feature detection in adapter. */
+    /** @future Not in brepkit-wasm 2.104.1. Referenced with feature detection in adapter. */
     compoundFuse?(solidIds: Uint32Array | number[]): number;
-    /** @future Not in brepkit-wasm 2.101.2. Referenced with feature detection in adapter. */
+    /** @future Not in brepkit-wasm 2.104.1. Referenced with feature detection in adapter. */
     copyEdge?(edge: number): number;
-    /** @future Not in brepkit-wasm 2.101.2. Referenced with feature detection in adapter. */
+    /** @future Not in brepkit-wasm 2.104.1. Referenced with feature detection in adapter. */
     transformEdge?(edge: number, matrix: Float64Array | number[]): void;
-    /** @future Not in brepkit-wasm 2.101.2. Referenced with feature detection in adapter. */
+    /** @future Not in brepkit-wasm 2.104.1. Referenced with feature detection in adapter. */
     validateSolidDetails?(solid: number): string;
     /** Release the entire arena. */
     free(): void;

package/dist/kernel/occtWasm/kernel2dOps.d.ts

@@ -39,7 +39,14 @@ export declare function rotateCurve2d(curve: Curve2dHandle, angle: number, cx: n
 export declare function scaleCurve2d(curve: Curve2dHandle, factor: number, cx: number, cy: number): Curve2dHandle;
 export declare function mirrorCurve2dAtPoint(curve: Curve2dHandle, cx: number, cy: number): Curve2dHandle;
 export declare function mirrorCurve2dAcrossAxis(curve: Curve2dHandle, originX: number, originY: number, dirX: number, dirY: number): Curve2dHandle;
-export declare function affinityTransform2d(curve: Curve2dHandle): Curve2dHandle;
+/**
+ * Directional affinity matching OCCT `gp_GTrsf2d::SetAffinity`: scales the
+ * component perpendicular to the axis `(dx, dy)` through `(ox, oy)` by `ratio`,
+ * leaving the parallel component fixed. Applied by sampling and refitting as a
+ * Bezier, since occt-wasm has no native Geom2d transform.
+ */
+export declare function affinityCurve2d(curve: Curve2dHandle, ox: number, oy: number, dx: number, dy: number, ratio: number): Curve2dHandle;
+export declare function affinityTransform2d(curve: Curve2dHandle, ox: number, oy: number, dx: number, dy: number, ratio: number): Curve2dHandle;
 export declare function createIdentityGTrsf2d(): KernelType;
 export declare function createAffinityGTrsf2d(originX: number, originY: number, dirX: number, dirY: number, ratio: number): KernelType;
 export declare function createTranslationGTrsf2d(dx: number, dy: number): KernelType;

package/dist/kernel/occtWasm/occtWasmAdapter.cjs

@@ -1,3 +1,3 @@
 Object.defineProperty(exports, Symbol.toStringTag, { value: "Module" });
-const require_occtWasmAdapter = require("../../occtWasmAdapter-5hzzhkME.cjs");
+const require_occtWasmAdapter = require("../../occtWasmAdapter-Bfz5Zfmk.cjs");
 exports.OcctWasmAdapter = require_occtWasmAdapter.OcctWasmAdapter;

package/dist/kernel/occtWasm/occtWasmAdapter.d.ts

@@ -388,7 +388,7 @@ export declare class OcctWasmAdapter implements KernelAdapter {
     scaleCurve2d(curve: Curve2dHandle, factor: number, cx: number, cy: number): Curve2dHandle;
     mirrorCurve2dAtPoint(curve: Curve2dHandle, cx: number, cy: number): Curve2dHandle;
     mirrorCurve2dAcrossAxis(curve: Curve2dHandle, originX: number, originY: number, dirX: number, dirY: number): Curve2dHandle;
-    affinityTransform2d(curve: Curve2dHandle, _axisOriginX: number, _axisOriginY: number, _axisDirX: number, _axisDirY: number, _ratio: number): Curve2dHandle;
+    affinityTransform2d(curve: Curve2dHandle, axisOriginX: number, axisOriginY: number, axisDirX: number, axisDirY: number, ratio: number): Curve2dHandle;
     createIdentityGTrsf2d(): KernelType;
     createAffinityGTrsf2d(originX: number, originY: number, dirX: number, dirY: number, ratio: number): KernelType;
     createTranslationGTrsf2d(dx: number, dy: number): KernelType;

package/dist/kernel/occtWasm/occtWasmAdapter.js

@@ -1,2 +1,2 @@
-import { t as OcctWasmAdapter } from "../../occtWasmAdapter-BMV179Ji.js";
+import { t as OcctWasmAdapter } from "../../occtWasmAdapter-BK6h0nKd.js";
 export { OcctWasmAdapter };

package/dist/{loftFns-DxhcdpAu.cjs → loftFns-BAM49XJy.cjs}

@@ -1,4 +1,4 @@
-const require_shapeTypes = require("./shapeTypes-D1eUDuzl.cjs");
+const require_shapeTypes = require("./shapeTypes-nFeOa7gQ.cjs");
 const require_errors = require("./errors-CXJtc4I7.cjs");
 const require_types = require("./types-KjA8tY4Y.cjs");
 const require_vecOps = require("./vecOps-CCnJt-yH.cjs");

package/dist/{loftFns-BVbzy6gm.js → loftFns-DF3KNz9-.js}

@@ -1,4 +1,4 @@
-import { Z as getKernel, c as createSolid, h as isShape3D, t as castShape, y as isWire } from "./shapeTypes-D4Evnmz_.js";
+import { Z as getKernel, c as createSolid, h as isShape3D, t as castShape, y as isWire } from "./shapeTypes-B8d_6R0X.js";
 import { A as ok, b as err, d as validationError, i as kernelError, l as typeCastError, t as BrepErrorCode, w as isErr } from "./errors-DNWJsfVU.js";
 import { r as toVec3 } from "./types-D24Y27N0.js";
 import { c as vecLength, d as vecNormalize, t as vecAdd } from "./vecOps-SKPRvPH-.js";

package/dist/{measureFns-BNHvjShh.cjs → measureFns-Ym_I522s.cjs}

@@ -1,7 +1,7 @@
-const require_shapeTypes = require("./shapeTypes-D1eUDuzl.cjs");
+const require_shapeTypes = require("./shapeTypes-nFeOa7gQ.cjs");
 const require_errors = require("./errors-CXJtc4I7.cjs");
-const require_topologyQueryFns = require("./topologyQueryFns-Nnu56Ke2.cjs");
-const require_faceFns = require("./faceFns-6AarivqH.cjs");
+const require_topologyQueryFns = require("./topologyQueryFns-Bhey0q1G.cjs");
+const require_faceFns = require("./faceFns-Obtamglc.cjs");
 //#region src/measurement/measureCache.ts
 var cache = /* @__PURE__ */ new WeakMap();
 function getCachedMeasurement(shape, key) {

package/dist/{measureFns-7Nz5JklM.js → measureFns-xpevHRLG.js}

@@ -1,7 +1,7 @@
-import { Z as getKernel } from "./shapeTypes-D4Evnmz_.js";
+import { Z as getKernel } from "./shapeTypes-B8d_6R0X.js";
 import { A as ok, b as err, d as validationError, t as BrepErrorCode } from "./errors-DNWJsfVU.js";
-import { w as kernelCallRaw } from "./topologyQueryFns-5EeBz6_7.js";
-import { m as uvBounds } from "./faceFns-BO8IXhhf.js";
+import { w as kernelCallRaw } from "./topologyQueryFns-BcGLEMvc.js";
+import { m as uvBounds } from "./faceFns-4JEna8n9.js";
 //#region src/measurement/measureCache.ts
 var cache = /* @__PURE__ */ new WeakMap();
 function getCachedMeasurement(shape, key) {

package/dist/measurement.cjs

@@ -1,5 +1,5 @@
 Object.defineProperty(exports, Symbol.toStringTag, { value: "Module" });
-const require_measureFns = require("./measureFns-BNHvjShh.cjs");
+const require_measureFns = require("./measureFns-Ym_I522s.cjs");
 exports.createDistanceQuery = require_measureFns.createDistanceQuery;
 exports.measureArea = require_measureFns.measureArea;
 exports.measureDistance = require_measureFns.measureDistance;

package/dist/measurement.js

@@ -1,2 +1,2 @@
-import { a as measureDistance, c as measureLinearProps, d as measureVolumeProps, l as measureSurfaceProps, n as measureArea, o as measureDistanceProps, s as measureLength, t as createDistanceQuery, u as measureVolume } from "./measureFns-7Nz5JklM.js";
+import { a as measureDistance, c as measureLinearProps, d as measureVolumeProps, l as measureSurfaceProps, n as measureArea, o as measureDistanceProps, s as measureLength, t as createDistanceQuery, u as measureVolume } from "./measureFns-xpevHRLG.js";
 export { createDistanceQuery, measureArea, measureDistance, measureDistanceProps, measureLength, measureLinearProps, measureSurfaceProps, measureVolume, measureVolumeProps };

package/dist/{meshFns-YXFipjjx.cjs → meshFns-DDhKhVK0.cjs}

@@ -1,7 +1,7 @@
-const require_shapeTypes = require("./shapeTypes-D1eUDuzl.cjs");
+const require_shapeTypes = require("./shapeTypes-nFeOa7gQ.cjs");
 const require_errors = require("./errors-CXJtc4I7.cjs");
-const require_topologyQueryFns = require("./topologyQueryFns-Nnu56Ke2.cjs");
-const require_shapeFns = require("./shapeFns-sF0x5Zhj.cjs");
+const require_topologyQueryFns = require("./topologyQueryFns-Bhey0q1G.cjs");
+const require_shapeFns = require("./shapeFns-CE6c_4D4.cjs");
 //#region src/topology/meshCache.ts
 /**
 * Build a parameter key for the inner cache map (excludes shape identity).

package/dist/{meshFns-CWwOpBlM.js → meshFns-soCHj3jp.js}

@@ -1,7 +1,7 @@
-import { Z as getKernel, gt as qualityDeflection } from "./shapeTypes-D4Evnmz_.js";
+import { Z as getKernel, gt as qualityDeflection } from "./shapeTypes-B8d_6R0X.js";
 import { A as ok, b as err, r as ioError } from "./errors-DNWJsfVU.js";
-import { d as getSolids, n as getBounds } from "./topologyQueryFns-5EeBz6_7.js";
-import { O as getFaceOrigins } from "./shapeFns-B6UAiYAx.js";
+import { d as getSolids, n as getBounds } from "./topologyQueryFns-BcGLEMvc.js";
+import { O as getFaceOrigins } from "./shapeFns-B8REDWBf.js";
 //#region src/topology/meshCache.ts
 /**
 * Build a parameter key for the inner cache map (excludes shape identity).