brepjs 18.77.0 → 18.78.1

package/dist/{primitiveFns-ItlGYe3M.cjs → healingFns--PtL9j2K.cjs}

@@ -1,13 +1,11 @@
-const require_shapeTypes = require("./shapeTypes-CxSqNvHA.cjs");
+const require_shapeTypes = require("./shapeTypes-DWxL75W3.cjs");
 const require_errors = require("./errors-CXJtc4I7.cjs");
-const require_topologyQueryFns = require("./topologyQueryFns-Dzxrwn-E.cjs");
+const require_topologyQueryFns = require("./topologyQueryFns-DfOxu8tG.cjs");
 const require_constants = require("./constants-BOVyEYGH.cjs");
-const require_faceFns = require("./faceFns-p0lyVuyw.cjs");
-const require_shapeFns = require("./shapeFns-D5WNrq3s.cjs");
+const require_faceFns = require("./faceFns-0sI6cbHe.cjs");
+const require_shapeFns = require("./shapeFns-CecvqmYJ.cjs");
 const require_arrayAccess = require("./arrayAccess-e4H9cBfh.cjs");
-const require_surfaceBuilders = require("./surfaceBuilders-CPHOXRLE.cjs");
-const require_booleanFns = require("./booleanFns-CFa3bgbG.cjs");
-const require_solidBuilders = require("./solidBuilders-diw2zyyN.cjs");
+const require_primitiveFns = require("./primitiveFns-DEBQdEkG.cjs");
 //#region src/topology/threeHelpers.ts
 /**
 * Convert a ShapeMesh into BufferGeometry-compatible typed arrays.
@@ -338,10 +336,10 @@ function getNurbsSurfaceData(face) {
 //#endregion
 //#region src/topology/booleanBatchFns.ts
 var REAL_OPS = {
-	cut: require_booleanFns.cut,
-	cutAll: require_booleanFns.cutAll,
-	fuse: require_booleanFns.fuse,
-	fuseAll: require_booleanFns.fuseAll
+	cut: require_primitiveFns.cut,
+	cutAll: require_primitiveFns.cutAll,
+	fuse: require_primitiveFns.fuse,
+	fuseAll: require_primitiveFns.fuseAll
 };
 function freezeTelemetry(t) {
 	return {
@@ -1355,305 +1353,6 @@ function fixSelfIntersection(wire) {
 	}
 }
 //#endregion
-//#region src/topology/primitiveFns.ts
-/**
-* Create a box with the given dimensions.
-*
-* @param width  - Size along X.
-* @param depth  - Size along Y.
-* @param height - Size along Z.
-*/
-function box(width, depth, height, options) {
-	const solid = require_shapeTypes.createSolid(require_shapeTypes.getKernel().makeBox(width, depth, height));
-	const center = options?.at ?? (options?.centered ? [
-		0,
-		0,
-		0
-	] : void 0);
-	if (center) return require_shapeFns.translate(solid, [
-		center[0] - width / 2,
-		center[1] - depth / 2,
-		center[2] - height / 2
-	]);
-	return solid;
-}
-/**
-* Create a cylinder with the given radius and height.
-*/
-function cylinder(radius, height, options) {
-	const at = options?.at ?? [
-		0,
-		0,
-		0
-	];
-	const axis = options?.axis ?? [
-		0,
-		0,
-		1
-	];
-	let solid = require_solidBuilders.makeCylinder(radius, height, at, axis);
-	if (options?.centered) {
-		const halfShift = [
-			-axis[0] * height * .5,
-			-axis[1] * height * .5,
-			-axis[2] * height * .5
-		];
-		solid = require_shapeFns.translate(solid, halfShift);
-	}
-	return solid;
-}
-/**
-* Create a sphere with the given radius.
-*/
-function sphere(radius, options) {
-	let solid = require_solidBuilders.makeSphere(radius);
-	if (options?.at) solid = require_shapeFns.translate(solid, options.at);
-	return solid;
-}
-/**
-* Create a cone (or frustum) with the given radii and height.
-*
-* @param bottomRadius - Radius at the base.
-* @param topRadius    - Radius at the top (0 for a full cone).
-* @param height       - Height of the cone.
-*/
-function cone(bottomRadius, topRadius, height, options) {
-	const at = options?.at ?? [
-		0,
-		0,
-		0
-	];
-	const axis = options?.axis ?? [
-		0,
-		0,
-		1
-	];
-	let solid = require_solidBuilders.makeCone(bottomRadius, topRadius, height, at, axis);
-	if (options?.centered) {
-		const halfShift = [
-			-axis[0] * height * .5,
-			-axis[1] * height * .5,
-			-axis[2] * height * .5
-		];
-		solid = require_shapeFns.translate(solid, halfShift);
-	}
-	return solid;
-}
-/**
-* Create a torus with the given major and minor radii.
-*/
-function torus(majorRadius, minorRadius, options) {
-	return require_solidBuilders.makeTorus(majorRadius, minorRadius, options?.at ?? [
-		0,
-		0,
-		0
-	], options?.axis ?? [
-		0,
-		0,
-		1
-	]);
-}
-/**
-* Create an ellipsoid with the given axis half-lengths.
-*
-* @param rx - Half-length along X.
-* @param ry - Half-length along Y.
-* @param rz - Half-length along Z.
-*/
-function ellipsoid(rx, ry, rz, options) {
-	let solid = require_solidBuilders.makeEllipsoid(rx, ry, rz);
-	if (options?.at) solid = require_shapeFns.translate(solid, options.at);
-	return solid;
-}
-/** Create a straight edge between two 3D points. */
-function line(from, to) {
-	return require_surfaceBuilders.makeLine(from, to);
-}
-/** Create a circular edge with the given radius. */
-function circle(radius, options) {
-	const axisDir = options?.axis ?? [
-		0,
-		0,
-		1
-	];
-	return require_surfaceBuilders.makeCircle(radius, options?.at ?? [
-		0,
-		0,
-		0
-	], axisDir);
-}
-/**
-* Create an elliptical edge.
-*
-* @returns An error if `minorRadius` exceeds `majorRadius`.
-*/
-function ellipse(majorRadius, minorRadius, options) {
-	const axisDir = options?.axis ?? [
-		0,
-		0,
-		1
-	];
-	return require_surfaceBuilders.makeEllipse(majorRadius, minorRadius, options?.at ?? [
-		0,
-		0,
-		0
-	], axisDir, options?.xDir);
-}
-/**
-* Create a helical wire.
-*
-* @param pitch  - Vertical distance per full turn.
-* @param height - Total height.
-* @param radius - Helix radius.
-*/
-function helix(pitch, height, radius, options) {
-	return require_surfaceBuilders.makeHelix(pitch, height, radius, options?.at ?? [
-		0,
-		0,
-		0
-	], options?.axis ?? [
-		0,
-		0,
-		1
-	], options?.lefthand ?? false);
-}
-/** Create a circular arc edge passing through three points. */
-function threePointArc(p1, p2, p3) {
-	return require_surfaceBuilders.makeThreePointArc(p1, p2, p3);
-}
-/**
-* Create an elliptical arc edge between two angles.
-*
-* All angles are in **degrees** (unlike the legacy `makeEllipseArc` which used radians).
-*
-* @param startAngle - Start angle in degrees.
-* @param endAngle   - End angle in degrees.
-*/
-function ellipseArc(majorRadius, minorRadius, startAngle, endAngle, options) {
-	const axisDir = options?.axis ?? [
-		0,
-		0,
-		1
-	];
-	return require_surfaceBuilders.makeEllipseArc(majorRadius, minorRadius, startAngle * require_constants.DEG2RAD, endAngle * require_constants.DEG2RAD, options?.at ?? [
-		0,
-		0,
-		0
-	], axisDir, options?.xDir);
-}
-/**
-* Create a B-spline edge that approximates a set of 3D points.
-*
-* @returns An error if the approximation algorithm fails.
-*/
-function bsplineApprox(points, config) {
-	return require_surfaceBuilders.makeBSplineApproximation(points, config);
-}
-/**
-* Create a Bezier curve edge from control points.
-*
-* @param points - Two or more control points.
-*/
-function bezier(points) {
-	return require_surfaceBuilders.makeBezierCurve(points);
-}
-/**
-* Create a circular arc edge tangent to a direction at the start point.
-*/
-function tangentArc(startPoint, startTgt, endPoint) {
-	return require_surfaceBuilders.makeTangentArc(startPoint, startTgt, endPoint);
-}
-/**
-* Assemble edges and/or wires into a single connected wire.
-*/
-function wire(listOfEdges) {
-	return require_surfaceBuilders.assembleWire(listOfEdges);
-}
-/**
-* Assemble edges into a wire and verify it forms a closed loop.
-*
-* Combines {@link wire} + the `closedWire` smart constructor in a single step.
-* Returns an error if the edges cannot be assembled or the wire is not closed.
-*
-* @example
-* ```ts
-* const cw = unwrap(wireLoop([e1, e2, e3, e4]));
-* const f = unwrap(face(cw)); // ClosedWire accepted directly
-* ```
-*/
-function wireLoop(listOfEdges) {
-	return require_errors.andThen(require_surfaceBuilders.assembleWire(listOfEdges), (w) => {
-		if (require_shapeTypes.isClosedWire(w)) return require_errors.ok(w);
-		return require_errors.err(require_errors.validationError("WIRE_NOT_CLOSED", "Assembled wire is not closed: start and end points do not coincide"));
-	});
-}
-/**
-* Create a planar face from a closed wire, optionally with holes.
-* The resulting face is always oriented (consistent normal direction).
-*/
-function face(w, holes) {
-	return require_surfaceBuilders.makeFace(w, holes);
-}
-/**
-* Create a non-planar face from a wire using surface filling.
-* The resulting face is always oriented.
-*/
-function filledFace(w) {
-	return require_surfaceBuilders.makeNonPlanarFace(w);
-}
-/**
-* Create a face bounded by a wire on an existing face's surface.
-* The resulting face inherits orientation from the origin face.
-*/
-function subFace(originFace, w) {
-	return require_surfaceBuilders.makeNewFaceWithinFace(originFace, w);
-}
-/**
-* Create a polygonal face from three or more coplanar points.
-* The resulting face is always oriented.
-*/
-function polygon(points) {
-	return require_surfaceBuilders.makePolygon(points);
-}
-/** Create a vertex at a 3D point. */
-function vertex(point) {
-	return require_solidBuilders.makeVertex(point);
-}
-/**
-* Build a compound from multiple shapes.
-*/
-function compound(shapeArray) {
-	return require_solidBuilders.makeCompound(shapeArray);
-}
-/**
-* Weld faces and shells into a single solid.
-* The resulting solid is always validated.
-*/
-function solid(facesOrShells) {
-	return require_solidBuilders.makeSolid(facesOrShells);
-}
-/**
-* Create an offset shape from a face.
-*/
-function offsetFace(f, distance, tolerance) {
-	return require_solidBuilders.makeOffset(f, distance, tolerance);
-}
-/**
-* Weld faces and shells into a single shell.
-*/
-function sewShells(facesOrShells, ignoreType) {
-	return require_solidBuilders.weldShellsAndFaces(facesOrShells, ignoreType);
-}
-function addHoles(f, holes) {
-	return require_surfaceBuilders.addHolesInFace(f, holes);
-}
-//#endregion
-Object.defineProperty(exports, "addHoles", {
-	enumerable: true,
-	get: function() {
-		return addHoles;
-	}
-});
 Object.defineProperty(exports, "adjacentFaces", {
 	enumerable: true,
 	get: function() {
@@ -1666,24 +1365,6 @@ Object.defineProperty(exports, "autoHeal", {
 		return autoHeal;
 	}
 });
-Object.defineProperty(exports, "bezier", {
-	enumerable: true,
-	get: function() {
-		return bezier;
-	}
-});
-Object.defineProperty(exports, "box", {
-	enumerable: true,
-	get: function() {
-		return box;
-	}
-});
-Object.defineProperty(exports, "bsplineApprox", {
-	enumerable: true,
-	get: function() {
-		return bsplineApprox;
-	}
-});
 Object.defineProperty(exports, "chamfer", {
 	enumerable: true,
 	get: function() {
@@ -1708,24 +1389,6 @@ Object.defineProperty(exports, "checkBoolean", {
 		return checkBoolean;
 	}
 });
-Object.defineProperty(exports, "circle", {
-	enumerable: true,
-	get: function() {
-		return circle;
-	}
-});
-Object.defineProperty(exports, "compound", {
-	enumerable: true,
-	get: function() {
-		return compound;
-	}
-});
-Object.defineProperty(exports, "cone", {
-	enumerable: true,
-	get: function() {
-		return cone;
-	}
-});
 Object.defineProperty(exports, "cutAllBisect", {
 	enumerable: true,
 	get: function() {
@@ -1738,12 +1401,6 @@ Object.defineProperty(exports, "cutWithEvolution", {
 		return cutWithEvolution;
 	}
 });
-Object.defineProperty(exports, "cylinder", {
-	enumerable: true,
-	get: function() {
-		return cylinder;
-	}
-});
 Object.defineProperty(exports, "draft", {
 	enumerable: true,
 	get: function() {
@@ -1756,42 +1413,12 @@ Object.defineProperty(exports, "edgesOfFace", {
 		return edgesOfFace;
 	}
 });
-Object.defineProperty(exports, "ellipse", {
-	enumerable: true,
-	get: function() {
-		return ellipse;
-	}
-});
-Object.defineProperty(exports, "ellipseArc", {
-	enumerable: true,
-	get: function() {
-		return ellipseArc;
-	}
-});
-Object.defineProperty(exports, "ellipsoid", {
-	enumerable: true,
-	get: function() {
-		return ellipsoid;
-	}
-});
-Object.defineProperty(exports, "face", {
-	enumerable: true,
-	get: function() {
-		return face;
-	}
-});
 Object.defineProperty(exports, "facesOfEdge", {
 	enumerable: true,
 	get: function() {
 		return facesOfEdge;
 	}
 });
-Object.defineProperty(exports, "filledFace", {
-	enumerable: true,
-	get: function() {
-		return filledFace;
-	}
-});
 Object.defineProperty(exports, "fillet", {
 	enumerable: true,
 	get: function() {
@@ -1864,12 +1491,6 @@ Object.defineProperty(exports, "healWire", {
 		return healWire;
 	}
 });
-Object.defineProperty(exports, "helix", {
-	enumerable: true,
-	get: function() {
-		return helix;
-	}
-});
 Object.defineProperty(exports, "intersectWithEvolution", {
 	enumerable: true,
 	get: function() {
@@ -1882,42 +1503,18 @@ Object.defineProperty(exports, "isValid", {
 		return isValid;
 	}
 });
-Object.defineProperty(exports, "line", {
-	enumerable: true,
-	get: function() {
-		return line;
-	}
-});
 Object.defineProperty(exports, "offset", {
 	enumerable: true,
 	get: function() {
 		return offset;
 	}
 });
-Object.defineProperty(exports, "offsetFace", {
-	enumerable: true,
-	get: function() {
-		return offsetFace;
-	}
-});
-Object.defineProperty(exports, "polygon", {
-	enumerable: true,
-	get: function() {
-		return polygon;
-	}
-});
 Object.defineProperty(exports, "positionOnCurve", {
 	enumerable: true,
 	get: function() {
 		return positionOnCurve;
 	}
 });
-Object.defineProperty(exports, "sewShells", {
-	enumerable: true,
-	get: function() {
-		return sewShells;
-	}
-});
 Object.defineProperty(exports, "sharedEdges", {
 	enumerable: true,
 	get: function() {
@@ -1936,48 +1533,18 @@ Object.defineProperty(exports, "shellWithEvolution", {
 		return shellWithEvolution;
 	}
 });
-Object.defineProperty(exports, "solid", {
-	enumerable: true,
-	get: function() {
-		return solid;
-	}
-});
 Object.defineProperty(exports, "solidFromShell", {
 	enumerable: true,
 	get: function() {
 		return solidFromShell;
 	}
 });
-Object.defineProperty(exports, "sphere", {
-	enumerable: true,
-	get: function() {
-		return sphere;
-	}
-});
-Object.defineProperty(exports, "subFace", {
-	enumerable: true,
-	get: function() {
-		return subFace;
-	}
-});
-Object.defineProperty(exports, "tangentArc", {
-	enumerable: true,
-	get: function() {
-		return tangentArc;
-	}
-});
 Object.defineProperty(exports, "thicken", {
 	enumerable: true,
 	get: function() {
 		return thicken;
 	}
 });
-Object.defineProperty(exports, "threePointArc", {
-	enumerable: true,
-	get: function() {
-		return threePointArc;
-	}
-});
 Object.defineProperty(exports, "toBufferGeometryData", {
 	enumerable: true,
 	get: function() {
@@ -2002,42 +1569,18 @@ Object.defineProperty(exports, "toLineGeometryData", {
 		return toLineGeometryData;
 	}
 });
-Object.defineProperty(exports, "torus", {
-	enumerable: true,
-	get: function() {
-		return torus;
-	}
-});
 Object.defineProperty(exports, "variableFillet", {
 	enumerable: true,
 	get: function() {
 		return variableFillet;
 	}
 });
-Object.defineProperty(exports, "vertex", {
-	enumerable: true,
-	get: function() {
-		return vertex;
-	}
-});
 Object.defineProperty(exports, "verticesOfEdge", {
 	enumerable: true,
 	get: function() {
 		return verticesOfEdge;
 	}
 });
-Object.defineProperty(exports, "wire", {
-	enumerable: true,
-	get: function() {
-		return wire;
-	}
-});
-Object.defineProperty(exports, "wireLoop", {
-	enumerable: true,
-	get: function() {
-		return wireLoop;
-	}
-});
 Object.defineProperty(exports, "wiresOfFace", {
 	enumerable: true,
 	get: function() {