brepjs 18.134.0 → 18.136.0

package/dist/{drawFns-CP82Xdma.cjs → drawFns-CYW65QTr.cjs}

@@ -1,22 +1,22 @@
-const require_shapeTypes = require("./shapeTypes-DVExh1xP.cjs");
+const require_shapeTypes = require("./shapeTypes-Dz5JzlYx.cjs");
 const require_bug = require("./bug-O02CsAmt.cjs");
 const require_errors = require("./errors-RHkKO5bZ.cjs");
-const require_topologyQueryFns = require("./topologyQueryFns-BtLGfXgL.cjs");
+const require_topologyQueryFns = require("./topologyQueryFns-DzYSYw51.cjs");
 const require_constants = require("./constants-BOVyEYGH.cjs");
 const require_types = require("./types-KjA8tY4Y.cjs");
 const require_vecOps = require("./vecOps-CCnJt-yH.cjs");
 const require_planeOps = require("./planeOps-VlFxtvzY.cjs");
-const require_faceFns = require("./faceFns-C0A8O-2a.cjs");
-const require_curveFns = require("./curveFns-jmKL1KZp.cjs");
+const require_faceFns = require("./faceFns-B5UiJH4H.cjs");
+const require_curveFns = require("./curveFns-BYcLLDAB.cjs");
 const require_arrayAccess = require("./arrayAccess-e4H9cBfh.cjs");
-const require_surfaceBuilders = require("./surfaceBuilders-DUTDN2Ay.cjs");
-const require_blueprintSketcher = require("./blueprintSketcher-B5UqD0FO.cjs");
-const require_helpers = require("./helpers-DLZUxawd.cjs");
-const require_blueprint = require("./blueprint-BgbVmx4L.cjs");
-const require_cornerFinder = require("./cornerFinder-DIe6pMPU.cjs");
-const require_boolean2D = require("./boolean2D-p7RMNFtG.cjs");
-const require_textBlueprints = require("./textBlueprints-BMvBJ79v.cjs");
-const require_cameraFns = require("./cameraFns-i1otOZ0V.cjs");
+const require_surfaceBuilders = require("./surfaceBuilders-CVLhWPtB.cjs");
+const require_blueprintSketcher = require("./blueprintSketcher-DeQYScWX.cjs");
+const require_helpers = require("./helpers-C9PIppuU.cjs");
+const require_blueprint = require("./blueprint-CdOcvuG4.cjs");
+const require_cornerFinder = require("./cornerFinder-WICP_RPb.cjs");
+const require_boolean2D = require("./boolean2D-C-Azd06V.cjs");
+const require_textBlueprints = require("./textBlueprints-hV1kO8tW.cjs");
+const require_cameraFns = require("./cameraFns-CdPdw2Ma.cjs");
 //#region src/2d/lib/stitching.ts
 /**
 * Group a flat list of curves into connected chains by matching endpoints.

package/dist/{faceFns-C0A8O-2a.cjs → faceFns-B5UiJH4H.cjs}

@@ -1,6 +1,6 @@
-const require_shapeTypes = require("./shapeTypes-DVExh1xP.cjs");
+const require_shapeTypes = require("./shapeTypes-Dz5JzlYx.cjs");
 const require_errors = require("./errors-RHkKO5bZ.cjs");
-const require_topologyQueryFns = require("./topologyQueryFns-BtLGfXgL.cjs");
+const require_topologyQueryFns = require("./topologyQueryFns-DzYSYw51.cjs");
 const require_types = require("./types-KjA8tY4Y.cjs");
 //#region src/topology/cast.ts
 var TOPO_ENUM = {

package/dist/{faceFns-CaBQNffu.js → faceFns-BfTHYEiw.js}

@@ -1,6 +1,6 @@
-import { K as getKernel, i as castShape } from "./shapeTypes-pxoxsXIo.js";
+import { K as getKernel, i as castShape } from "./shapeTypes-D3bntzog.js";
 import { E as ok, P as unwrap, g as err, l as typeCastError } from "./errors-MHLiNE-C.js";
-import { a as getCachedSurfaceType } from "./topologyQueryFns-CwYkfE3v.js";
+import { a as getCachedSurfaceType } from "./topologyQueryFns-qvptbhqO.js";
 import { r as toVec3 } from "./types-D24Y27N0.js";
 //#region src/topology/cast.ts
 var TOPO_ENUM = {

package/dist/{healingFns-BqmIvfPm.cjs → healingFns-ChcvzVB8.cjs}

@@ -1,9 +1,9 @@
-const require_shapeTypes = require("./shapeTypes-DVExh1xP.cjs");
+const require_shapeTypes = require("./shapeTypes-Dz5JzlYx.cjs");
 const require_errors = require("./errors-RHkKO5bZ.cjs");
-const require_topologyQueryFns = require("./topologyQueryFns-BtLGfXgL.cjs");
+const require_topologyQueryFns = require("./topologyQueryFns-DzYSYw51.cjs");
 const require_constants = require("./constants-BOVyEYGH.cjs");
-const require_faceFns = require("./faceFns-C0A8O-2a.cjs");
-const require_solidBuilders = require("./solidBuilders-CgW7Ge_s.cjs");
+const require_faceFns = require("./faceFns-B5UiJH4H.cjs");
+const require_solidBuilders = require("./solidBuilders-B3EZcVNw.cjs");
 const require_arrayAccess = require("./arrayAccess-e4H9cBfh.cjs");
 //#region src/topology/threeHelpers.ts
 /**

package/dist/{healingFns-BrrTpxjI.js → healingFns-DAVYFXVB.js}

@@ -1,9 +1,9 @@
-import { C as isSolid, E as getShapeKind, K as getKernel, T as isWire, h as disposeResultShape, i as castShape, m as disposeDowncastSource, n as castResultShape, x as isShape3D, y as isFace } from "./shapeTypes-pxoxsXIo.js";
+import { C as isSolid, E as getShapeKind, K as getKernel, T as isWire, h as disposeResultShape, i as castShape, m as disposeDowncastSource, n as castResultShape, x as isShape3D, y as isFace } from "./shapeTypes-D3bntzog.js";
 import { E as ok, b as isErr, d as validationError, g as err, i as kernelError, l as typeCastError, t as BrepErrorCode, x as isOk } from "./errors-MHLiNE-C.js";
-import { c as getFaces, i as getCachedIsValid, m as invalidateShapeCache, p as getWires, s as getEdges } from "./topologyQueryFns-CwYkfE3v.js";
+import { c as getFaces, i as getCachedIsValid, m as invalidateShapeCache, p as getWires, s as getEdges } from "./topologyQueryFns-qvptbhqO.js";
 import { n as HASH_CODE_MAX } from "./constants-ITRzCnCp.js";
-import { y as downcast } from "./faceFns-CaBQNffu.js";
-import { C as propagateAllMetadata, f as cut, h as fuseAll, m as fuse, p as cutAll, x as collectInputFaceHashes } from "./solidBuilders-Devga1Vk.js";
+import { y as downcast } from "./faceFns-BfTHYEiw.js";
+import { C as propagateAllMetadata, f as cut, h as fuseAll, m as fuse, p as cutAll, x as collectInputFaceHashes } from "./solidBuilders-FOfRGZq0.js";
 import { t as firstOrThrow } from "./arrayAccess-DrUGPADn.js";
 //#region src/topology/threeHelpers.ts
 /**

package/dist/{helpers-DLZUxawd.cjs → helpers-C9PIppuU.cjs}

@@ -1,12 +1,12 @@
-const require_shapeTypes = require("./shapeTypes-DVExh1xP.cjs");
+const require_shapeTypes = require("./shapeTypes-Dz5JzlYx.cjs");
 const require_errors = require("./errors-RHkKO5bZ.cjs");
-const require_topologyQueryFns = require("./topologyQueryFns-BtLGfXgL.cjs");
+const require_topologyQueryFns = require("./topologyQueryFns-DzYSYw51.cjs");
 const require_constants = require("./constants-BOVyEYGH.cjs");
 const require_vecOps = require("./vecOps-CCnJt-yH.cjs");
-const require_faceFns = require("./faceFns-C0A8O-2a.cjs");
-const require_shapeFns = require("./shapeFns-DDTLk0mJ.cjs");
-const require_curveFns = require("./curveFns-jmKL1KZp.cjs");
-const require_measureFns = require("./measureFns-CaEuNAZO.cjs");
+const require_faceFns = require("./faceFns-B5UiJH4H.cjs");
+const require_shapeFns = require("./shapeFns-xApQafn6.cjs");
+const require_curveFns = require("./curveFns-BYcLLDAB.cjs");
+const require_measureFns = require("./measureFns-B-UbL3Rw.cjs");
 //#region src/utils/vec2d.ts
 /** Precision for curve intersection and parameter operations. */
 var PRECISION_INTERSECTION = 1e-9;
@@ -320,6 +320,12 @@ Object.defineProperty(exports, "PRECISION_OFFSET", {
 		return PRECISION_OFFSET;
 	}
 });
+Object.defineProperty(exports, "PRECISION_POINT", {
+	enumerable: true,
+	get: function() {
+		return PRECISION_POINT;
+	}
+});
 Object.defineProperty(exports, "add2d", {
 	enumerable: true,
 	get: function() {

package/dist/{helpers-BiqV-wPK.js → helpers-CvwerZfP.js}

@@ -1,12 +1,12 @@
-import { K as getKernel, y as isFace } from "./shapeTypes-pxoxsXIo.js";
+import { K as getKernel, y as isFace } from "./shapeTypes-D3bntzog.js";
 import { E as ok, g as err, o as queryError, x as isOk } from "./errors-MHLiNE-C.js";
-import { c as getFaces, f as getVertices, p as getWires, s as getEdges } from "./topologyQueryFns-CwYkfE3v.js";
+import { c as getFaces, f as getVertices, p as getWires, s as getEdges } from "./topologyQueryFns-qvptbhqO.js";
 import { t as DEG2RAD } from "./constants-ITRzCnCp.js";
 import { a as vecDot, d as vecNormalize } from "./vecOps-SKPRvPH-.js";
-import { l as normalAt, s as getSurfaceType } from "./faceFns-CaBQNffu.js";
-import { a as isSameShape, n as getHashCode } from "./shapeFns-DyDRpo6K.js";
-import { f as getCurveType, i as curveIsClosed, o as curveLength } from "./curveFns-Bh_PHl9N.js";
-import { n as measureArea } from "./measureFns-9-1Ng0wR.js";
+import { l as normalAt, s as getSurfaceType } from "./faceFns-BfTHYEiw.js";
+import { a as isSameShape, n as getHashCode } from "./shapeFns-s6VgcNkU.js";
+import { f as getCurveType, i as curveIsClosed, o as curveLength } from "./curveFns-BtXR6kJ7.js";
+import { n as measureArea } from "./measureFns-DtiZvj_X.js";
 //#region src/utils/vec2d.ts
 /** Precision for curve intersection and parameter operations. */
 var PRECISION_INTERSECTION = 1e-9;
@@ -308,4 +308,4 @@ function getSingleFace(f, shape) {
 	return f(faceFinder()).findUnique(shape);
 }
 //#endregion
-export { samePoint as _, createTypedFinder as a, subtract2d as b, add2d as c, crossProduct2d as d, distance2d as f, rotate2d as g, polarToCartesian as h, wireFinder as i, angle2d as l, polarAngle2d as m, edgeFinder as n, PRECISION_INTERSECTION as o, normalize2d as p, faceFinder as r, PRECISION_OFFSET as s, getSingleFace as t, cartesianToPolar as u, scalarMultiply2d as v, squareDistance2d as y };
+export { rotate2d as _, createTypedFinder as a, squareDistance2d as b, PRECISION_POINT as c, cartesianToPolar as d, crossProduct2d as f, polarToCartesian as g, polarAngle2d as h, wireFinder as i, add2d as l, normalize2d as m, edgeFinder as n, PRECISION_INTERSECTION as o, distance2d as p, faceFinder as r, PRECISION_OFFSET as s, getSingleFace as t, angle2d as u, samePoint as v, subtract2d as x, scalarMultiply2d as y };

package/dist/{importFns-ncp_0vEl.cjs → importFns-Bt9YEImO.cjs}

@@ -1,8 +1,8 @@
-const require_shapeTypes = require("./shapeTypes-DVExh1xP.cjs");
+const require_shapeTypes = require("./shapeTypes-Dz5JzlYx.cjs");
 const require_bug = require("./bug-O02CsAmt.cjs");
 const require_errors = require("./errors-RHkKO5bZ.cjs");
 const require_arrayAccess = require("./arrayAccess-e4H9cBfh.cjs");
-const require_blueprint = require("./blueprint-BgbVmx4L.cjs");
+const require_blueprint = require("./blueprint-CdOcvuG4.cjs");
 //#region src/io/objExportFns.ts
 /** Read a vec3 from a typed array at the given vertex index. */
 function vec3At(arr, i) {

package/dist/{importFns-BId6d2pt.js → importFns-DSY1pI70.js}

@@ -1,8 +1,8 @@
-import { K as getKernel, n as castResultShape } from "./shapeTypes-pxoxsXIo.js";
+import { K as getKernel, n as castResultShape } from "./shapeTypes-D3bntzog.js";
 import { i as wasmIndex, r as vec3At$1 } from "./bug-BdOHwn_e.js";
 import { E as ok, g as err, r as ioError, t as BrepErrorCode } from "./errors-MHLiNE-C.js";
 import { n as getAtOrThrow } from "./arrayAccess-DrUGPADn.js";
-import { f as make2dSegmentCurve, m as make2dThreePointArc, s as make2dBezierCurve, t as Blueprint } from "./blueprint-DRvc1LOz.js";
+import { f as make2dSegmentCurve, m as make2dThreePointArc, s as make2dBezierCurve, t as Blueprint } from "./blueprint-BzDq9Rfb.js";
 //#region src/io/objExportFns.ts
 /** Read a vec3 from a typed array at the given vertex index. */
 function vec3At(arr, i) {

package/dist/io.cjs

@@ -1,6 +1,6 @@
 Object.defineProperty(exports, Symbol.toStringTag, { value: "Module" });
-const require_meshFns = require("./meshFns-CB7HsxzB.cjs");
-const require_importFns = require("./importFns-ncp_0vEl.cjs");
+const require_meshFns = require("./meshFns-B461Ku2S.cjs");
+const require_importFns = require("./importFns-Bt9YEImO.cjs");
 exports.blueprintToDXF = require_importFns.blueprintToDXF;
 exports.exportDXF = require_importFns.exportDXF;
 exports.exportGlb = require_importFns.exportGlb;

package/dist/io.js

@@ -1,3 +1,3 @@
-import { n as exportSTEP, r as exportSTL, t as exportIGES } from "./meshFns-CpfeEN1b.js";
-import { a as importSVG, c as blueprintToDXF, d as exportGltf, f as exportOBJ, i as exportSTEPConfigured, l as exportDXF, n as importSTEP, o as importSVGPathD, r as importSTL, s as exportThreeMF, t as importIGES, u as exportGlb } from "./importFns-BId6d2pt.js";
+import { n as exportSTEP, r as exportSTL, t as exportIGES } from "./meshFns-CqJScqWa.js";
+import { a as importSVG, c as blueprintToDXF, d as exportGltf, f as exportOBJ, i as exportSTEPConfigured, l as exportDXF, n as importSTEP, o as importSVGPathD, r as importSTL, s as exportThreeMF, t as importIGES, u as exportGlb } from "./importFns-DSY1pI70.js";
 export { blueprintToDXF, exportDXF, exportGlb, exportGltf, exportIGES, exportOBJ, exportSTEP, exportSTEPConfigured, exportSTL, exportThreeMF, importIGES, importSTEP, importSTL, importSVG, importSVGPathD };

package/dist/kernel/occtWasm/occtWasmAdapter.cjs

@@ -1,3 +1,3 @@
 Object.defineProperty(exports, Symbol.toStringTag, { value: "Module" });
-const require_occtWasmAdapter = require("../../occtWasmAdapter-DEpy64ji.cjs");
+const require_occtWasmAdapter = require("../../occtWasmAdapter-G8mkVxgw.cjs");
 exports.OcctWasmAdapter = require_occtWasmAdapter.OcctWasmAdapter;

package/dist/kernel/occtWasm/occtWasmAdapter.js

@@ -1,2 +1,2 @@
-import { t as OcctWasmAdapter } from "../../occtWasmAdapter-BEe---7w.js";
+import { t as OcctWasmAdapter } from "../../occtWasmAdapter-Bzx2d8zN.js";
 export { OcctWasmAdapter };

package/dist/{loftFns-m7LoJWE2.js → loftFns-Bl8reWqk.js}

@@ -1,4 +1,4 @@
-import { K as getKernel, T as isWire, W as _usingCtx, h as disposeResultShape, n as castResultShape, x as isShape3D } from "./shapeTypes-pxoxsXIo.js";
+import { K as getKernel, T as isWire, W as _usingCtx, h as disposeResultShape, n as castResultShape, x as isShape3D } from "./shapeTypes-D3bntzog.js";
 import { E as ok, b as isErr, d as validationError, g as err, i as kernelError, l as typeCastError, t as BrepErrorCode } from "./errors-MHLiNE-C.js";
 import { r as toVec3 } from "./types-D24Y27N0.js";
 import { c as vecLength, t as vecAdd } from "./vecOps-SKPRvPH-.js";

package/dist/{loftFns-u-yPHpJ9.cjs → loftFns-CdwKSxw1.cjs}

@@ -1,4 +1,4 @@
-const require_shapeTypes = require("./shapeTypes-DVExh1xP.cjs");
+const require_shapeTypes = require("./shapeTypes-Dz5JzlYx.cjs");
 const require_errors = require("./errors-RHkKO5bZ.cjs");
 const require_types = require("./types-KjA8tY4Y.cjs");
 const require_vecOps = require("./vecOps-CCnJt-yH.cjs");

package/dist/{measureFns-CaEuNAZO.cjs → measureFns-B-UbL3Rw.cjs}

@@ -1,7 +1,7 @@
-const require_shapeTypes = require("./shapeTypes-DVExh1xP.cjs");
+const require_shapeTypes = require("./shapeTypes-Dz5JzlYx.cjs");
 const require_errors = require("./errors-RHkKO5bZ.cjs");
-const require_topologyQueryFns = require("./topologyQueryFns-BtLGfXgL.cjs");
-const require_faceFns = require("./faceFns-C0A8O-2a.cjs");
+const require_topologyQueryFns = require("./topologyQueryFns-DzYSYw51.cjs");
+const require_faceFns = require("./faceFns-B5UiJH4H.cjs");
 //#region src/measurement/measureCache.ts
 var cache = /* @__PURE__ */ new WeakMap();
 function getCachedMeasurement(shape, key) {

package/dist/{measureFns-9-1Ng0wR.js → measureFns-DtiZvj_X.js}

@@ -1,7 +1,7 @@
-import { K as getKernel } from "./shapeTypes-pxoxsXIo.js";
+import { K as getKernel } from "./shapeTypes-D3bntzog.js";
 import { E as ok, d as validationError, g as err, t as BrepErrorCode } from "./errors-MHLiNE-C.js";
-import { T as kernelCallRaw } from "./topologyQueryFns-CwYkfE3v.js";
-import { m as uvBounds } from "./faceFns-CaBQNffu.js";
+import { T as kernelCallRaw } from "./topologyQueryFns-qvptbhqO.js";
+import { m as uvBounds } from "./faceFns-BfTHYEiw.js";
 //#region src/measurement/measureCache.ts
 var cache = /* @__PURE__ */ new WeakMap();
 function getCachedMeasurement(shape, key) {

package/dist/measurement.cjs

@@ -1,5 +1,5 @@
 Object.defineProperty(exports, Symbol.toStringTag, { value: "Module" });
-const require_measureFns = require("./measureFns-CaEuNAZO.cjs");
+const require_measureFns = require("./measureFns-B-UbL3Rw.cjs");
 exports.createDistanceQuery = require_measureFns.createDistanceQuery;
 exports.measureArea = require_measureFns.measureArea;
 exports.measureDistance = require_measureFns.measureDistance;

package/dist/measurement.js

@@ -1,2 +1,2 @@
-import { a as measureDistance, c as measureLinearProps, d as measureVolumeProps, l as measureSurfaceProps, n as measureArea, o as measureDistanceProps, s as measureLength, t as createDistanceQuery, u as measureVolume } from "./measureFns-9-1Ng0wR.js";
+import { a as measureDistance, c as measureLinearProps, d as measureVolumeProps, l as measureSurfaceProps, n as measureArea, o as measureDistanceProps, s as measureLength, t as createDistanceQuery, u as measureVolume } from "./measureFns-DtiZvj_X.js";
 export { createDistanceQuery, measureArea, measureDistance, measureDistanceProps, measureLength, measureLinearProps, measureSurfaceProps, measureVolume, measureVolumeProps };

package/dist/{meshFns-CB7HsxzB.cjs → meshFns-B461Ku2S.cjs}

@@ -1,7 +1,7 @@
-const require_shapeTypes = require("./shapeTypes-DVExh1xP.cjs");
+const require_shapeTypes = require("./shapeTypes-Dz5JzlYx.cjs");
 const require_errors = require("./errors-RHkKO5bZ.cjs");
-const require_topologyQueryFns = require("./topologyQueryFns-BtLGfXgL.cjs");
-const require_originTrackingFns = require("./originTrackingFns-CKKmLIUH.cjs");
+const require_topologyQueryFns = require("./topologyQueryFns-DzYSYw51.cjs");
+const require_originTrackingFns = require("./originTrackingFns-rh_FbN6R.cjs");
 //#region src/topology/meshCache.ts
 /**
 * Build a parameter key for the inner cache map (excludes shape identity).

package/dist/{meshFns-CpfeEN1b.js → meshFns-CqJScqWa.js}

@@ -1,7 +1,7 @@
-import { K as getKernel, lt as qualityDeflection } from "./shapeTypes-pxoxsXIo.js";
+import { K as getKernel, lt as qualityDeflection } from "./shapeTypes-D3bntzog.js";
 import { E as ok, g as err, r as ioError } from "./errors-MHLiNE-C.js";
-import { d as getSolids, n as getBounds } from "./topologyQueryFns-CwYkfE3v.js";
-import { t as getFaceOrigins } from "./originTrackingFns-JxAlPJXX.js";
+import { d as getSolids, n as getBounds } from "./topologyQueryFns-qvptbhqO.js";
+import { t as getFaceOrigins } from "./originTrackingFns-BWA8gv5V.js";
 //#region src/topology/meshCache.ts
 /**
 * Build a parameter key for the inner cache map (excludes shape identity).

package/dist/{occtWasmAdapter-BEe---7w.js → occtWasmAdapter-Bzx2d8zN.js}

@@ -576,10 +576,22 @@ function rotateCurve2d$1(c, angle, cx, cy) {
 			...c,
 			poles: c.poles.map(([x, y]) => rotatePoint(x, y))
 		};
-		case "trimmed": return {
-			...c,
-			basis: rotateCurve2d$1(c.basis, angle, cx, cy)
-		};
+		case "trimmed": {
+			const basis = rotateCurve2d$1(c.basis, angle, cx, cy);
+			if (basis.__bk2d === "circle") {
+				const shift = basis.sense ? angle : -angle;
+				return {
+					...c,
+					basis,
+					tStart: c.tStart + shift,
+					tEnd: c.tEnd + shift
+				};
+			}
+			return {
+				...c,
+				basis
+			};
+		}
 	}
 }
 function scaleCurve2d$1(c, factor, cx, cy) {
@@ -634,10 +646,11 @@ function scaleCurve2d$1(c, factor, cx, cy) {
 	}
 }
 function mirrorAtPoint(c, cx, cy) {
-	return scaleCurve2d$1(c, -1, cx, cy);
+	return rotateCurve2d$1(c, Math.PI, cx, cy);
 }
 function mirrorAcrossAxis(c, ox, oy, dx, dy) {
 	const len = Math.sqrt(dx * dx + dy * dy);
+	if (len < 1e-15) return c;
 	const nx = dx / len;
 	const ny = dy / len;
 	const reflectPoint = (x, y) => {
@@ -689,10 +702,23 @@ function mirrorAcrossAxis(c, ox, oy, dx, dy) {
 			...c,
 			poles: c.poles.map(([x, y]) => reflectPoint(x, y))
 		};
-		case "trimmed": return {
-			...c,
-			basis: mirrorAcrossAxis(c.basis, ox, oy, dx, dy)
-		};
+		case "trimmed": {
+			const basis = mirrorAcrossAxis(c.basis, ox, oy, dx, dy);
+			if (c.basis.__bk2d === "circle" && basis.__bk2d === "circle") {
+				const phi = Math.atan2(ny, nx);
+				const shift = c.basis.sense ? -2 * phi : 2 * phi;
+				return {
+					...c,
+					basis,
+					tStart: c.tStart + shift,
+					tEnd: c.tEnd + shift
+				};
+			}
+			return {
+				...c,
+				basis
+			};
+		}
 	}
 }
 /**
@@ -4118,7 +4144,10 @@ function transformCurve2dGeneral(curve, gtrsf) {
 	if (t["type"] === "translate2d") return translateCurve2d(curve, Number(t["dx"]) || 0, Number(t["dy"]) || 0);
 	if (t["type"] === "rotate2d") return rotateCurve2d(curve, Number(t["angle"]) || 0, Number(t["cx"]) || 0, Number(t["cy"]) || 0);
 	if (t["type"] === "scale2d") return scaleCurve2d(curve, Number(t["sx"]) || 1, Number(t["cx"]) || 0, Number(t["cy"]) || 0);
-	if (t["type"] === "mirror2d") return mirrorCurve2dAtPoint(curve, Number(t["ox"]) || 0, Number(t["oy"]) || 0);
+	if (t["type"] === "mirror2d") {
+		if (t["mode"] === "axis") return mirrorCurve2dAcrossAxis(curve, Number(t["originX"]) || 0, Number(t["originY"]) || 0, Number(t["dirX"]) || 0, Number(t["dirY"]) || 0);
+		return mirrorCurve2dAtPoint(curve, Number(t["cx"]) || 0, Number(t["cy"]) || 0);
+	}
 	if (t["type"] === "affinity2d") return affinityCurve2d(curve, Number(t["axOriginX"]) || 0, Number(t["axOriginY"]) || 0, Number(t["axDirX"]) || 0, Number(t["axDirY"]) || 0, Number(t["ratio"]) || 1);
 	if (Number(t["dx"]) || Number(t["dy"])) return translateCurve2d(curve, Number(t["dx"]) || 0, Number(t["dy"]) || 0);
 	return curve;

package/dist/{occtWasmAdapter-DEpy64ji.cjs → occtWasmAdapter-G8mkVxgw.cjs}

@@ -576,10 +576,22 @@ function rotateCurve2d$1(c, angle, cx, cy) {
 			...c,
 			poles: c.poles.map(([x, y]) => rotatePoint(x, y))
 		};
-		case "trimmed": return {
-			...c,
-			basis: rotateCurve2d$1(c.basis, angle, cx, cy)
-		};
+		case "trimmed": {
+			const basis = rotateCurve2d$1(c.basis, angle, cx, cy);
+			if (basis.__bk2d === "circle") {
+				const shift = basis.sense ? angle : -angle;
+				return {
+					...c,
+					basis,
+					tStart: c.tStart + shift,
+					tEnd: c.tEnd + shift
+				};
+			}
+			return {
+				...c,
+				basis
+			};
+		}
 	}
 }
 function scaleCurve2d$1(c, factor, cx, cy) {
@@ -634,10 +646,11 @@ function scaleCurve2d$1(c, factor, cx, cy) {
 	}
 }
 function mirrorAtPoint(c, cx, cy) {
-	return scaleCurve2d$1(c, -1, cx, cy);
+	return rotateCurve2d$1(c, Math.PI, cx, cy);
 }
 function mirrorAcrossAxis(c, ox, oy, dx, dy) {
 	const len = Math.sqrt(dx * dx + dy * dy);
+	if (len < 1e-15) return c;
 	const nx = dx / len;
 	const ny = dy / len;
 	const reflectPoint = (x, y) => {
@@ -689,10 +702,23 @@ function mirrorAcrossAxis(c, ox, oy, dx, dy) {
 			...c,
 			poles: c.poles.map(([x, y]) => reflectPoint(x, y))
 		};
-		case "trimmed": return {
-			...c,
-			basis: mirrorAcrossAxis(c.basis, ox, oy, dx, dy)
-		};
+		case "trimmed": {
+			const basis = mirrorAcrossAxis(c.basis, ox, oy, dx, dy);
+			if (c.basis.__bk2d === "circle" && basis.__bk2d === "circle") {
+				const phi = Math.atan2(ny, nx);
+				const shift = c.basis.sense ? -2 * phi : 2 * phi;
+				return {
+					...c,
+					basis,
+					tStart: c.tStart + shift,
+					tEnd: c.tEnd + shift
+				};
+			}
+			return {
+				...c,
+				basis
+			};
+		}
 	}
 }
 /**
@@ -4118,7 +4144,10 @@ function transformCurve2dGeneral(curve, gtrsf) {
 	if (t["type"] === "translate2d") return translateCurve2d(curve, Number(t["dx"]) || 0, Number(t["dy"]) || 0);
 	if (t["type"] === "rotate2d") return rotateCurve2d(curve, Number(t["angle"]) || 0, Number(t["cx"]) || 0, Number(t["cy"]) || 0);
 	if (t["type"] === "scale2d") return scaleCurve2d(curve, Number(t["sx"]) || 1, Number(t["cx"]) || 0, Number(t["cy"]) || 0);
-	if (t["type"] === "mirror2d") return mirrorCurve2dAtPoint(curve, Number(t["ox"]) || 0, Number(t["oy"]) || 0);
+	if (t["type"] === "mirror2d") {
+		if (t["mode"] === "axis") return mirrorCurve2dAcrossAxis(curve, Number(t["originX"]) || 0, Number(t["originY"]) || 0, Number(t["dirX"]) || 0, Number(t["dirY"]) || 0);
+		return mirrorCurve2dAtPoint(curve, Number(t["cx"]) || 0, Number(t["cy"]) || 0);
+	}
 	if (t["type"] === "affinity2d") return affinityCurve2d(curve, Number(t["axOriginX"]) || 0, Number(t["axOriginY"]) || 0, Number(t["axDirX"]) || 0, Number(t["axDirY"]) || 0, Number(t["ratio"]) || 1);
 	if (Number(t["dx"]) || Number(t["dy"])) return translateCurve2d(curve, Number(t["dx"]) || 0, Number(t["dy"]) || 0);
 	return curve;

package/dist/operations.cjs

@@ -1,6 +1,6 @@
 Object.defineProperty(exports, Symbol.toStringTag, { value: "Module" });
-const require_threadFns = require("./threadFns-BQIE5dO9.cjs");
-const require_loftFns = require("./loftFns-u-yPHpJ9.cjs");
+const require_threadFns = require("./threadFns-Dd0C7WLp.cjs");
+const require_loftFns = require("./loftFns-CdwKSxw1.cjs");
 exports.addChild = require_threadFns.addChild;
 exports.addJoint = require_threadFns.addJoint;
 exports.addStep = require_threadFns.addStep;

package/dist/operations.js

@@ -1,3 +1,3 @@
-import { A as setJointValue, B as walkAssembly, C as cylindricalJoint, D as planarJoint, E as mechanismDOF, F as countNodes, H as circularPattern, I as createAssemblyNode, L as findNode, M as sphericalJoint, N as addChild, O as prismaticJoint, P as collectShapes, R as removeChild, S as addJoint, T as jointTransform, U as gridPattern, V as exportAssemblySTEP, W as linearPattern, Y as createAssembly, _ as exportURDF, b as inverseKinematics, c as modifyStep, d as replayFrom, f as replayHistory, g as undoLast, h as stepsFrom, i as createRegistry, j as setJointValues, k as revoluteJoint, l as registerOperation, m as stepCount, n as addStep, o as findStep, r as createHistory, s as getShape, t as thread, u as registerShape, v as importURDF, w as forwardKinematics, x as jointTrajectory, y as jointsFromDH, z as updateNode } from "./threadFns-B6-3UeCZ.js";
-import { c as twistExtrude, o as supportExtrude, r as complexExtrude, s as sweep } from "./loftFns-m7LoJWE2.js";
+import { A as setJointValue, B as walkAssembly, C as cylindricalJoint, D as planarJoint, E as mechanismDOF, F as countNodes, H as circularPattern, I as createAssemblyNode, L as findNode, M as sphericalJoint, N as addChild, O as prismaticJoint, P as collectShapes, R as removeChild, S as addJoint, T as jointTransform, U as gridPattern, V as exportAssemblySTEP, W as linearPattern, Y as createAssembly, _ as exportURDF, b as inverseKinematics, c as modifyStep, d as replayFrom, f as replayHistory, g as undoLast, h as stepsFrom, i as createRegistry, j as setJointValues, k as revoluteJoint, l as registerOperation, m as stepCount, n as addStep, o as findStep, r as createHistory, s as getShape, t as thread, u as registerShape, v as importURDF, w as forwardKinematics, x as jointTrajectory, y as jointsFromDH, z as updateNode } from "./threadFns-CQErpnNd.js";
+import { c as twistExtrude, o as supportExtrude, r as complexExtrude, s as sweep } from "./loftFns-Bl8reWqk.js";
 export { addChild, addJoint, addStep, circularPattern, collectShapes, complexExtrude, countNodes, createAssembly, createAssemblyNode, createHistory, createRegistry, cylindricalJoint, exportAssemblySTEP, exportURDF, findNode, findStep, forwardKinematics, getShape as getHistoryShape, gridPattern, importURDF, inverseKinematics, jointTrajectory, jointTransform, jointsFromDH, linearPattern, mechanismDOF, modifyStep, planarJoint, prismaticJoint, registerOperation, registerShape, removeChild, replayFrom, replayHistory, revoluteJoint, setJointValue, setJointValues, sphericalJoint, stepCount, stepsFrom, supportExtrude, sweep, thread, twistExtrude, undoLast, updateNode, walkAssembly };

package/dist/{originTrackingFns-JxAlPJXX.js → originTrackingFns-BWA8gv5V.js}

@@ -1,5 +1,5 @@
-import { K as getKernel } from "./shapeTypes-pxoxsXIo.js";
-import { S as subShapeHashes, c as getFaces, l as getOrCreateCache, r as getCacheEntry } from "./topologyQueryFns-CwYkfE3v.js";
+import { K as getKernel } from "./shapeTypes-D3bntzog.js";
+import { S as subShapeHashes, c as getFaces, l as getOrCreateCache, r as getCacheEntry } from "./topologyQueryFns-qvptbhqO.js";
 import { n as HASH_CODE_MAX } from "./constants-ITRzCnCp.js";
 //#region src/topology/metadata/originTrackingFns.ts
 /**

package/dist/{originTrackingFns-CKKmLIUH.cjs → originTrackingFns-rh_FbN6R.cjs}

@@ -1,5 +1,5 @@
-const require_shapeTypes = require("./shapeTypes-DVExh1xP.cjs");
-const require_topologyQueryFns = require("./topologyQueryFns-BtLGfXgL.cjs");
+const require_shapeTypes = require("./shapeTypes-Dz5JzlYx.cjs");
+const require_topologyQueryFns = require("./topologyQueryFns-DzYSYw51.cjs");
 const require_constants = require("./constants-BOVyEYGH.cjs");
 //#region src/topology/metadata/originTrackingFns.ts
 /**

package/dist/{primitiveFns-C6Trlz8m.cjs → primitiveFns-BTxppy_Y.cjs}

@@ -1,9 +1,9 @@
-const require_shapeTypes = require("./shapeTypes-DVExh1xP.cjs");
+const require_shapeTypes = require("./shapeTypes-Dz5JzlYx.cjs");
 const require_errors = require("./errors-RHkKO5bZ.cjs");
-const require_validityTypes = require("./validityTypes-C2nklkrH.cjs");
+const require_validityTypes = require("./validityTypes-Beci6AC-.cjs");
 const require_constants = require("./constants-BOVyEYGH.cjs");
-const require_solidBuilders = require("./solidBuilders-CgW7Ge_s.cjs");
-const require_surfaceBuilders = require("./surfaceBuilders-DUTDN2Ay.cjs");
+const require_solidBuilders = require("./solidBuilders-B3EZcVNw.cjs");
+const require_surfaceBuilders = require("./surfaceBuilders-CVLhWPtB.cjs");
 //#region src/topology/transformFns.ts
 /**
 * Immutable shape transforms — translate, rotate, scale, mirror, applyMatrix.

package/dist/{primitiveFns-BSMbMRf1.js → primitiveFns-C-p7jKZt.js}

@@ -1,9 +1,9 @@
-import { K as getKernel, W as _usingCtx, d as createSolid, n as castResultShape } from "./shapeTypes-pxoxsXIo.js";
+import { K as getKernel, W as _usingCtx, d as createSolid, n as castResultShape } from "./shapeTypes-D3bntzog.js";
 import { E as ok, d as validationError, g as err, m as andThen, t as BrepErrorCode } from "./errors-MHLiNE-C.js";
-import { n as isClosedWire } from "./validityTypes-Bl3adWZb.js";
+import { n as isClosedWire } from "./validityTypes-DF2h0WJo.js";
 import { n as HASH_CODE_MAX, t as DEG2RAD } from "./constants-ITRzCnCp.js";
-import { C as propagateAllMetadata, S as hasAnyMetadata, T as propagateMetadataThroughRelocation, a as makeOffset, c as makeTorus, i as makeEllipsoid, l as makeVertex, n as makeCone, o as makeSolid, r as makeCylinder, s as makeSphere, t as makeCompound, u as weldShellsAndFaces, w as propagateMetadataByHash, x as collectInputFaceHashes } from "./solidBuilders-Devga1Vk.js";
-import { _ as makeThreePointArc, a as makeNonPlanarFace, c as makeBSplineApproximation, d as makeCircle, f as makeEllipse, g as makeTangentArc, h as makeLine, i as makeNewFaceWithinFace, m as makeHelix, o as makePolygon, p as makeEllipseArc, r as makeFace, s as assembleWire, t as addHolesInFace, u as makeBezierCurve } from "./surfaceBuilders-B7WlmoVr.js";
+import { C as propagateAllMetadata, S as hasAnyMetadata, T as propagateMetadataThroughRelocation, a as makeOffset, c as makeTorus, i as makeEllipsoid, l as makeVertex, n as makeCone, o as makeSolid, r as makeCylinder, s as makeSphere, t as makeCompound, u as weldShellsAndFaces, w as propagateMetadataByHash, x as collectInputFaceHashes } from "./solidBuilders-FOfRGZq0.js";
+import { _ as makeThreePointArc, a as makeNonPlanarFace, c as makeBSplineApproximation, d as makeCircle, f as makeEllipse, g as makeTangentArc, h as makeLine, i as makeNewFaceWithinFace, m as makeHelix, o as makePolygon, p as makeEllipseArc, r as makeFace, s as assembleWire, t as addHolesInFace, u as makeBezierCurve } from "./surfaceBuilders-Dcf7LRqM.js";
 //#region src/topology/transformFns.ts
 /**
 * Immutable shape transforms — translate, rotate, scale, mirror, applyMatrix.

package/dist/projection.cjs

@@ -1,5 +1,5 @@
 Object.defineProperty(exports, Symbol.toStringTag, { value: "Module" });
-const require_cameraFns = require("./cameraFns-i1otOZ0V.cjs");
+const require_cameraFns = require("./cameraFns-CdPdw2Ma.cjs");
 exports.PROJECTION_PLANES = require_cameraFns.PROJECTION_PLANES;
 exports.cameraFromPlane = require_cameraFns.cameraFromPlane;
 exports.cameraLookAt = require_cameraFns.cameraLookAt;

package/dist/projection.js

@@ -1,2 +1,2 @@
-import { a as makeProjectedEdges, i as projectEdges, n as cameraLookAt, o as PROJECTION_PLANES, r as createCamera, s as isProjectionPlane, t as cameraFromPlane } from "./cameraFns-VVI0cWLa.js";
+import { a as makeProjectedEdges, i as projectEdges, n as cameraLookAt, o as PROJECTION_PLANES, r as createCamera, s as isProjectionPlane, t as cameraFromPlane } from "./cameraFns-BqSTuHN2.js";
 export { PROJECTION_PLANES, cameraFromPlane, cameraLookAt, createCamera, isProjectionPlane, makeProjectedEdges, projectEdges };

package/dist/query.cjs

@@ -1,6 +1,6 @@
 Object.defineProperty(exports, Symbol.toStringTag, { value: "Module" });
-const require_helpers = require("./helpers-DLZUxawd.cjs");
-const require_cornerFinder = require("./cornerFinder-DIe6pMPU.cjs");
+const require_helpers = require("./helpers-C9PIppuU.cjs");
+const require_cornerFinder = require("./cornerFinder-WICP_RPb.cjs");
 exports.cornerFinder = require_cornerFinder.cornerFinder;
 exports.edgeFinder = require_helpers.edgeFinder;
 exports.faceFinder = require_helpers.faceFinder;

package/dist/query.js

@@ -1,3 +1,3 @@
-import { n as edgeFinder, r as faceFinder, t as getSingleFace } from "./helpers-BiqV-wPK.js";
-import { t as cornerFinder } from "./cornerFinder-CiHpo7kU.js";
+import { n as edgeFinder, r as faceFinder, t as getSingleFace } from "./helpers-CvwerZfP.js";
+import { t as cornerFinder } from "./cornerFinder-CBNgUcWy.js";
 export { cornerFinder, edgeFinder, faceFinder, getSingleFace };

package/dist/{refResolveFns-DcyIQSDi.js → refResolveFns-BPnjuRUW.js}

@@ -1,9 +1,9 @@
-import { K as getKernel, g as disposeTransientSubShape, o as castShapeWithKnownType } from "./shapeTypes-pxoxsXIo.js";
-import { C as vertexPosition, c as getFaces } from "./topologyQueryFns-CwYkfE3v.js";
-import { i as faceGeomType, l as normalAt, r as faceCenter } from "./faceFns-CaBQNffu.js";
-import { n as getHashCode } from "./shapeFns-DyDRpo6K.js";
-import { n as measureArea, s as measureLength } from "./measureFns-9-1Ng0wR.js";
-import { a as facesOfVertex, c as verticesOfFace, i as facesOfEdge, o as sharedEdges, s as verticesOfEdge, t as adjacentFaceHashes } from "./adjacencyFns-CwcdjOsT.js";
+import { K as getKernel, g as disposeTransientSubShape, o as castShapeWithKnownType } from "./shapeTypes-D3bntzog.js";
+import { C as vertexPosition, c as getFaces } from "./topologyQueryFns-qvptbhqO.js";
+import { i as faceGeomType, l as normalAt, r as faceCenter } from "./faceFns-BfTHYEiw.js";
+import { n as getHashCode } from "./shapeFns-s6VgcNkU.js";
+import { n as measureArea, s as measureLength } from "./measureFns-DtiZvj_X.js";
+import { a as facesOfVertex, c as verticesOfFace, i as facesOfEdge, o as sharedEdges, s as verticesOfEdge, t as adjacentFaceHashes } from "./adjacencyFns-BMgFDWFO.js";
 //#region src/topology/shapeRef/scoring.ts
 /**
 * Default face scorer combining surface type, normal alignment, centroid proximity,

package/dist/{refResolveFns-c7RWIsZy.cjs → refResolveFns-DEU2yvJU.cjs}

@@ -1,9 +1,9 @@
-const require_shapeTypes = require("./shapeTypes-DVExh1xP.cjs");
-const require_topologyQueryFns = require("./topologyQueryFns-BtLGfXgL.cjs");
-const require_faceFns = require("./faceFns-C0A8O-2a.cjs");
-const require_shapeFns = require("./shapeFns-DDTLk0mJ.cjs");
-const require_measureFns = require("./measureFns-CaEuNAZO.cjs");
-const require_adjacencyFns = require("./adjacencyFns-BhdfZany.cjs");
+const require_shapeTypes = require("./shapeTypes-Dz5JzlYx.cjs");
+const require_topologyQueryFns = require("./topologyQueryFns-DzYSYw51.cjs");
+const require_faceFns = require("./faceFns-B5UiJH4H.cjs");
+const require_shapeFns = require("./shapeFns-xApQafn6.cjs");
+const require_measureFns = require("./measureFns-B-UbL3Rw.cjs");
+const require_adjacencyFns = require("./adjacencyFns-Clu4DbkI.cjs");
 //#region src/topology/shapeRef/scoring.ts
 /**
 * Default face scorer combining surface type, normal alignment, centroid proximity,

package/dist/{shapeFns-DyDRpo6K.js → shapeFns-s6VgcNkU.js}

@@ -1,6 +1,6 @@
-import { K as getKernel } from "./shapeTypes-pxoxsXIo.js";
+import { K as getKernel } from "./shapeTypes-D3bntzog.js";
 import { t as BrepErrorCode } from "./errors-MHLiNE-C.js";
-import { T as kernelCallRaw, w as kernelCall } from "./topologyQueryFns-CwYkfE3v.js";
+import { T as kernelCallRaw, w as kernelCall } from "./topologyQueryFns-qvptbhqO.js";
 import { n as HASH_CODE_MAX } from "./constants-ITRzCnCp.js";
 //#region src/topology/shapeFns.ts
 /**

package/dist/{shapeFns-DDTLk0mJ.cjs → shapeFns-xApQafn6.cjs}

@@ -1,6 +1,6 @@
-const require_shapeTypes = require("./shapeTypes-DVExh1xP.cjs");
+const require_shapeTypes = require("./shapeTypes-Dz5JzlYx.cjs");
 const require_errors = require("./errors-RHkKO5bZ.cjs");
-const require_topologyQueryFns = require("./topologyQueryFns-BtLGfXgL.cjs");
+const require_topologyQueryFns = require("./topologyQueryFns-DzYSYw51.cjs");
 const require_constants = require("./constants-BOVyEYGH.cjs");
 //#region src/topology/shapeFns.ts
 /**

package/dist/shapeRef.cjs

@@ -1,5 +1,5 @@
 Object.defineProperty(exports, Symbol.toStringTag, { value: "Module" });
-const require_refResolveFns = require("./refResolveFns-c7RWIsZy.cjs");
+const require_refResolveFns = require("./refResolveFns-DEU2yvJU.cjs");
 exports.assignRoles = require_refResolveFns.assignRoles;
 exports.captureHint = require_refResolveFns.captureHint;
 exports.createDerivedFaceRef = require_refResolveFns.createDerivedFaceRef;