brepjs 18.124.0 → 18.124.1

package/dist/{loftFns-DQVg8qxM.js → loftFns-sILTLlrA.js}

@@ -1,4 +1,4 @@
-import { K as getKernel, T as isWire, W as _usingCtx, h as disposeResultShape, n as castResultShape, x as isShape3D } from "./shapeTypes-bHlssytH.js";
+import { K as getKernel, T as isWire, W as _usingCtx, h as disposeResultShape, n as castResultShape, x as isShape3D } from "./shapeTypes-7_c5mEYb.js";
 import { E as ok, b as isErr, d as validationError, g as err, i as kernelError, l as typeCastError, t as BrepErrorCode } from "./errors-MHLiNE-C.js";
 import { r as toVec3 } from "./types-D24Y27N0.js";
 import { c as vecLength, t as vecAdd } from "./vecOps-SKPRvPH-.js";
@@ -22,7 +22,8 @@ import { c as vecLength, t as vecAdd } from "./vecOps-SKPRvPH-.js";
 function buildLawFromProfile(extrusionLength, { profile, endFactor = 1 }) {
 	if (extrusionLength < 1e-10) return err(validationError("INVALID_EXTRUSION_LENGTH", "Extrusion length too small (< 1e-10)"));
 	if (profile !== "s-curve" && profile !== "linear") return err(validationError("UNSUPPORTED_PROFILE", `Unsupported extrusion profile: ${String(profile)}`));
-	return ok(getKernel().buildExtrusionLaw(profile, extrusionLength, endFactor).Trim(0, extrusionLength, 1e-6));
+	const law = getKernel().buildExtrusionLaw(profile, extrusionLength, endFactor);
+	return ok(law.Trim(0, extrusionLength, 1e-6));
 }
 //#endregion
 //#region src/operations/sweepFns.ts
@@ -42,7 +43,8 @@ function makeSpineWire(start, end) {
 }
 /** Build a helix wire for twist extrusion. */
 function makeHelixWire(pitch, height, radius, center, dir, leftHanded = false) {
-	return castResultShape(getKernel().makeHelixWire(pitch, height, radius, [...center], [...dir], leftHanded));
+	const kernel = getKernel();
+	return castResultShape(kernel.makeHelixWire(pitch, height, radius, [...center], [...dir], leftHanded));
 }
 /** Cast a shell-mode sweep result `[shell, startWire, endWire]`, releasing all three on any reject. */
 function castSweepShellTuple(result) {
@@ -86,7 +88,8 @@ function castSweepShellTuple(result) {
 */
 function sweep(wire, spine, config = {}, shellMode = false) {
 	if (config.mode === "simple" && !shellMode) {
-		const shape = castResultShape(getKernel().simplePipe(wire.wrapped, spine.wrapped));
+		const resultOc = getKernel().simplePipe(wire.wrapped, spine.wrapped);
+		const shape = castResultShape(resultOc);
 		if (!isShape3D(shape)) {
 			disposeResultShape(shape);
 			return err(typeCastError("SWEEP_NOT_3D", "Simple pipe did not produce a 3D shape"));
@@ -279,11 +282,12 @@ function multiSectionSweep(sections, spine, options) {
 				positioned.push(p);
 				positionedWires.push(kernel.downcast(p, "wire"));
 			}
-			const result = castResultShape(kernel.loftAdvanced(positionedWires, {
+			const loftResult = kernel.loftAdvanced(positionedWires, {
 				solid,
 				ruled,
 				tolerance
-			}));
+			});
+			const result = castResultShape(loftResult);
 			if (!isShape3D(result)) {
 				disposeResultShape(result);
 				return err(typeCastError("MULTI_SWEEP_NOT_3D", "Multi-section sweep did not produce a 3D shape"));
@@ -325,7 +329,8 @@ function guidedSweep(profile, spine, guides, options = {}) {
 				boundTolerance: tolerance
 			} : {}
 		});
-		const result = castResultShape(typeof sweepResult === "object" && "shape" in sweepResult ? sweepResult.shape : sweepResult);
+		const ocShape = typeof sweepResult === "object" && "shape" in sweepResult ? sweepResult.shape : sweepResult;
+		const result = castResultShape(ocShape);
 		if (!isShape3D(result)) {
 			disposeResultShape(result);
 			return err(typeCastError("GUIDED_SWEEP_NOT_3D", "Guided sweep did not produce a 3D shape"));
@@ -366,13 +371,14 @@ function loft(wires, { ruled = true, startPoint, endPoint, tolerance = 1e-6 } =
 	const startVertex = startPoint ? kernel.makeVertex(...toVec3(startPoint)) : void 0;
 	const endVertex = endPoint ? kernel.makeVertex(...toVec3(endPoint)) : void 0;
 	try {
-		const result = castResultShape(kernel.loftAdvanced(wires.map((w) => w.wrapped), {
+		const shape = kernel.loftAdvanced(wires.map((w) => w.wrapped), {
 			solid: !returnShell,
 			ruled,
 			tolerance,
 			...startVertex ? { startVertex } : {},
 			...endVertex ? { endVertex } : {}
-		}));
+		});
+		const result = castResultShape(shape);
 		if (!isShape3D(result)) {
 			disposeResultShape(result);
 			return err(typeCastError("LOFT_NOT_3D", "Loft did not produce a 3D shape"));

package/dist/{measureFns-BbLLBg5q.js → measureFns-B9CjOY97.js}

@@ -1,7 +1,7 @@
-import { K as getKernel } from "./shapeTypes-bHlssytH.js";
+import { K as getKernel } from "./shapeTypes-7_c5mEYb.js";
 import { E as ok, d as validationError, g as err, t as BrepErrorCode } from "./errors-MHLiNE-C.js";
-import { T as kernelCallRaw } from "./topologyQueryFns-DVhWxBwT.js";
-import { m as uvBounds } from "./faceFns-Ce7Fq6j5.js";
+import { T as kernelCallRaw } from "./topologyQueryFns-Bihcwoz0.js";
+import { m as uvBounds } from "./faceFns-Dy4lA0f_.js";
 //#region src/measurement/measureCache.ts
 var cache = /* @__PURE__ */ new WeakMap();
 function getCachedMeasurement(shape, key) {

package/dist/{measureFns-Cao9gY1L.cjs → measureFns-D3wAgSGr.cjs}

@@ -1,7 +1,7 @@
-const require_shapeTypes = require("./shapeTypes-DZKuRt24.cjs");
+const require_shapeTypes = require("./shapeTypes-Dm6f4xsN.cjs");
 const require_errors = require("./errors-RHkKO5bZ.cjs");
-const require_topologyQueryFns = require("./topologyQueryFns-DZUpJz2p.cjs");
-const require_faceFns = require("./faceFns-UozswcwP.cjs");
+const require_topologyQueryFns = require("./topologyQueryFns-RjAzu76K.cjs");
+const require_faceFns = require("./faceFns-D9LdZArB.cjs");
 //#region src/measurement/measureCache.ts
 var cache = /* @__PURE__ */ new WeakMap();
 function getCachedMeasurement(shape, key) {

package/dist/measurement.cjs

@@ -1,5 +1,5 @@
 Object.defineProperty(exports, Symbol.toStringTag, { value: "Module" });
-const require_measureFns = require("./measureFns-Cao9gY1L.cjs");
+const require_measureFns = require("./measureFns-D3wAgSGr.cjs");
 exports.createDistanceQuery = require_measureFns.createDistanceQuery;
 exports.measureArea = require_measureFns.measureArea;
 exports.measureDistance = require_measureFns.measureDistance;

package/dist/measurement.js

@@ -1,2 +1,2 @@
-import { a as measureDistance, c as measureLinearProps, d as measureVolumeProps, l as measureSurfaceProps, n as measureArea, o as measureDistanceProps, s as measureLength, t as createDistanceQuery, u as measureVolume } from "./measureFns-BbLLBg5q.js";
+import { a as measureDistance, c as measureLinearProps, d as measureVolumeProps, l as measureSurfaceProps, n as measureArea, o as measureDistanceProps, s as measureLength, t as createDistanceQuery, u as measureVolume } from "./measureFns-B9CjOY97.js";
 export { createDistanceQuery, measureArea, measureDistance, measureDistanceProps, measureLength, measureLinearProps, measureSurfaceProps, measureVolume, measureVolumeProps };

package/dist/{meshFns-B6NveFwc.js → meshFns-BWgXP2-7.js}

@@ -1,7 +1,7 @@
-import { K as getKernel, lt as qualityDeflection } from "./shapeTypes-bHlssytH.js";
+import { K as getKernel, lt as qualityDeflection } from "./shapeTypes-7_c5mEYb.js";
 import { E as ok, g as err, r as ioError } from "./errors-MHLiNE-C.js";
-import { d as getSolids, n as getBounds } from "./topologyQueryFns-DVhWxBwT.js";
-import { t as getFaceOrigins } from "./originTrackingFns-DXcggmgf.js";
+import { d as getSolids, n as getBounds } from "./topologyQueryFns-Bihcwoz0.js";
+import { t as getFaceOrigins } from "./originTrackingFns-CgXHRXve.js";
 //#region src/topology/meshCache.ts
 /**
 * Build a parameter key for the inner cache map (excludes shape identity).

package/dist/{meshFns-CnYIUU9b.cjs → meshFns-C5Mni6NE.cjs}

@@ -1,7 +1,7 @@
-const require_shapeTypes = require("./shapeTypes-DZKuRt24.cjs");
+const require_shapeTypes = require("./shapeTypes-Dm6f4xsN.cjs");
 const require_errors = require("./errors-RHkKO5bZ.cjs");
-const require_topologyQueryFns = require("./topologyQueryFns-DZUpJz2p.cjs");
-const require_originTrackingFns = require("./originTrackingFns-uz38yuMp.cjs");
+const require_topologyQueryFns = require("./topologyQueryFns-RjAzu76K.cjs");
+const require_originTrackingFns = require("./originTrackingFns-BVmoGfxj.cjs");
 //#region src/topology/meshCache.ts
 /**
 * Build a parameter key for the inner cache map (excludes shape identity).

package/dist/{occtWasmAdapter-BQKQXF63.js → occtWasmAdapter-BEe---7w.js}

@@ -295,6 +295,8 @@ function quickHull(inputPoints, tolerance) {
 }
 //#endregion
 //#region src/kernel/geometry2d.ts
+/* v8 ignore file -- excluded from coverage reports; prevents V8 instrumentation
+overhead that causes 2D-heavy tests to timeout under coverage mode. */
 function evaluateCurve2d$1(c, t) {
 	switch (c.__bk2d) {
 		case "line": return [c.ox + c.dx * t, c.oy + c.dy * t];
@@ -901,7 +903,7 @@ function numericalIntersect(c1, c2, tolerance, isSelf = false) {
 		});
 	}
 	const crossTol = Math.max(tolerance * 100, .5);
-	const seg2Bounds = new Float64Array(N * 6);
+	const seg2Bounds = /* @__PURE__ */ new Float64Array(600);
 	for (let j = 0; j < N; j++) {
 		const a = pts2[j], b = pts2[j + 1];
 		const off = j * 6;

package/dist/{occtWasmAdapter-Aubfbks6.cjs → occtWasmAdapter-DEpy64ji.cjs}

@@ -295,6 +295,8 @@ function quickHull(inputPoints, tolerance) {
 }
 //#endregion
 //#region src/kernel/geometry2d.ts
+/* v8 ignore file -- excluded from coverage reports; prevents V8 instrumentation
+overhead that causes 2D-heavy tests to timeout under coverage mode. */
 function evaluateCurve2d$1(c, t) {
 	switch (c.__bk2d) {
 		case "line": return [c.ox + c.dx * t, c.oy + c.dy * t];
@@ -901,7 +903,7 @@ function numericalIntersect(c1, c2, tolerance, isSelf = false) {
 		});
 	}
 	const crossTol = Math.max(tolerance * 100, .5);
-	const seg2Bounds = new Float64Array(N * 6);
+	const seg2Bounds = /* @__PURE__ */ new Float64Array(600);
 	for (let j = 0; j < N; j++) {
 		const a = pts2[j], b = pts2[j + 1];
 		const off = j * 6;

package/dist/operations.cjs

@@ -1,6 +1,6 @@
 Object.defineProperty(exports, Symbol.toStringTag, { value: "Module" });
-const require_threadFns = require("./threadFns-BMT6ziG_.cjs");
-const require_loftFns = require("./loftFns-BYiUcAxk.cjs");
+const require_threadFns = require("./threadFns-ZrJsQtPC.cjs");
+const require_loftFns = require("./loftFns-Bd6Qs7uB.cjs");
 exports.addChild = require_threadFns.addChild;
 exports.addJoint = require_threadFns.addJoint;
 exports.addStep = require_threadFns.addStep;

package/dist/operations.js

@@ -1,3 +1,3 @@
-import { A as setJointValue, B as createAssemblyNode, C as cylindricalJoint, D as planarJoint, E as mechanismDOF, G as circularPattern, H as removeChild, J as exportAssemblySTEP, K as gridPattern, L as addChild, M as sphericalJoint, O as prismaticJoint, R as collectShapes, S as addJoint, T as jointTransform, U as updateNode, V as findNode, W as walkAssembly, Y as createAssembly, _ as exportURDF, b as inverseKinematics, c as modifyStep, d as replayFrom, f as replayHistory, g as undoLast, h as stepsFrom, i as createRegistry, j as setJointValues, k as revoluteJoint, l as registerOperation, m as stepCount, n as addStep, o as findStep, q as linearPattern, r as createHistory, s as getShape, t as thread, u as registerShape, v as importURDF, w as forwardKinematics, x as jointTrajectory, y as jointsFromDH, z as countNodes } from "./threadFns-BAjFNk2_.js";
-import { c as twistExtrude, o as supportExtrude, r as complexExtrude, s as sweep } from "./loftFns-DQVg8qxM.js";
+import { A as setJointValue, B as createAssemblyNode, C as cylindricalJoint, D as planarJoint, E as mechanismDOF, G as circularPattern, H as removeChild, J as exportAssemblySTEP, K as gridPattern, L as addChild, M as sphericalJoint, O as prismaticJoint, R as collectShapes, S as addJoint, T as jointTransform, U as updateNode, V as findNode, W as walkAssembly, Y as createAssembly, _ as exportURDF, b as inverseKinematics, c as modifyStep, d as replayFrom, f as replayHistory, g as undoLast, h as stepsFrom, i as createRegistry, j as setJointValues, k as revoluteJoint, l as registerOperation, m as stepCount, n as addStep, o as findStep, q as linearPattern, r as createHistory, s as getShape, t as thread, u as registerShape, v as importURDF, w as forwardKinematics, x as jointTrajectory, y as jointsFromDH, z as countNodes } from "./threadFns-CJDOHziO.js";
+import { c as twistExtrude, o as supportExtrude, r as complexExtrude, s as sweep } from "./loftFns-sILTLlrA.js";
 export { addChild, addJoint, addStep, circularPattern, collectShapes, complexExtrude, countNodes, createAssembly, createAssemblyNode, createHistory, createRegistry, cylindricalJoint, exportAssemblySTEP, exportURDF, findNode, findStep, forwardKinematics, getShape as getHistoryShape, gridPattern, importURDF, inverseKinematics, jointTrajectory, jointTransform, jointsFromDH, linearPattern, mechanismDOF, modifyStep, planarJoint, prismaticJoint, registerOperation, registerShape, removeChild, replayFrom, replayHistory, revoluteJoint, setJointValue, setJointValues, sphericalJoint, stepCount, stepsFrom, supportExtrude, sweep, thread, twistExtrude, undoLast, updateNode, walkAssembly };

package/dist/{originTrackingFns-uz38yuMp.cjs → originTrackingFns-BVmoGfxj.cjs}

@@ -1,5 +1,5 @@
-const require_shapeTypes = require("./shapeTypes-DZKuRt24.cjs");
-const require_topologyQueryFns = require("./topologyQueryFns-DZUpJz2p.cjs");
+const require_shapeTypes = require("./shapeTypes-Dm6f4xsN.cjs");
+const require_topologyQueryFns = require("./topologyQueryFns-RjAzu76K.cjs");
 const require_constants = require("./constants-BOVyEYGH.cjs");
 //#region src/topology/metadata/originTrackingFns.ts
 /**

package/dist/{originTrackingFns-DXcggmgf.js → originTrackingFns-CgXHRXve.js}

@@ -1,5 +1,5 @@
-import { K as getKernel } from "./shapeTypes-bHlssytH.js";
-import { S as subShapeHashes, c as getFaces, l as getOrCreateCache, r as getCacheEntry } from "./topologyQueryFns-DVhWxBwT.js";
+import { K as getKernel } from "./shapeTypes-7_c5mEYb.js";
+import { S as subShapeHashes, c as getFaces, l as getOrCreateCache, r as getCacheEntry } from "./topologyQueryFns-Bihcwoz0.js";
 import { n as HASH_CODE_MAX } from "./constants-ITRzCnCp.js";
 //#region src/topology/metadata/originTrackingFns.ts
 /**

package/dist/{primitiveFns-DmEPf6av.cjs → primitiveFns-BI3xR_wX.cjs}

@@ -1,9 +1,9 @@
-const require_shapeTypes = require("./shapeTypes-DZKuRt24.cjs");
+const require_shapeTypes = require("./shapeTypes-Dm6f4xsN.cjs");
 const require_errors = require("./errors-RHkKO5bZ.cjs");
-const require_validityTypes = require("./validityTypes-CCnRq3A9.cjs");
+const require_validityTypes = require("./validityTypes-DeiK-KFO.cjs");
 const require_constants = require("./constants-BOVyEYGH.cjs");
-const require_solidBuilders = require("./solidBuilders-5tA9O1SM.cjs");
-const require_surfaceBuilders = require("./surfaceBuilders-0x7j0ibk.cjs");
+const require_solidBuilders = require("./solidBuilders-D0dqmSE6.cjs");
+const require_surfaceBuilders = require("./surfaceBuilders-DEMrBvXW.cjs");
 //#region src/topology/transformFns.ts
 /**
 * Immutable shape transforms — translate, rotate, scale, mirror, applyMatrix.
@@ -163,7 +163,9 @@ function applyMatrix(shape, matrix) {
 		require_solidBuilders.propagateAllMetadata(evolution, [shape], result);
 		return require_errors.ok(result);
 	}
-	const result = require_shapeTypes.castResultShape(require_shapeTypes.getKernel().generalTransformNonOrthogonal(shape.wrapped, linear, translation));
+	/* v8 ignore start -- untestable until WASM is rebuilt with BRepBuilderAPI_GTransform */
+	const resultShape = require_shapeTypes.getKernel().generalTransformNonOrthogonal(shape.wrapped, linear, translation);
+	const result = require_shapeTypes.castResultShape(resultShape);
 	require_solidBuilders.propagateMetadataByHash([shape], result);
 	return require_errors.ok(result);
 	/* v8 ignore stop */

package/dist/{primitiveFns-CmmTWOkO.js → primitiveFns-CSOkiKA7.js}

@@ -1,9 +1,9 @@
-import { K as getKernel, W as _usingCtx, d as createSolid, n as castResultShape } from "./shapeTypes-bHlssytH.js";
+import { K as getKernel, W as _usingCtx, d as createSolid, n as castResultShape } from "./shapeTypes-7_c5mEYb.js";
 import { E as ok, d as validationError, g as err, m as andThen, t as BrepErrorCode } from "./errors-MHLiNE-C.js";
-import { n as isClosedWire } from "./validityTypes-19mfqWVv.js";
+import { n as isClosedWire } from "./validityTypes-C1GMwI9t.js";
 import { n as HASH_CODE_MAX, t as DEG2RAD } from "./constants-ITRzCnCp.js";
-import { C as propagateAllMetadata, S as hasAnyMetadata, T as propagateMetadataThroughRelocation, a as makeOffset, c as makeTorus, i as makeEllipsoid, l as makeVertex, n as makeCone, o as makeSolid, r as makeCylinder, s as makeSphere, t as makeCompound, u as weldShellsAndFaces, w as propagateMetadataByHash, x as collectInputFaceHashes } from "./solidBuilders-9s-j-ZiW.js";
-import { _ as makeThreePointArc, a as makeNonPlanarFace, c as makeBSplineApproximation, d as makeCircle, f as makeEllipse, g as makeTangentArc, h as makeLine, i as makeNewFaceWithinFace, m as makeHelix, o as makePolygon, p as makeEllipseArc, r as makeFace, s as assembleWire, t as addHolesInFace, u as makeBezierCurve } from "./surfaceBuilders-B7UnwkQz.js";
+import { C as propagateAllMetadata, S as hasAnyMetadata, T as propagateMetadataThroughRelocation, a as makeOffset, c as makeTorus, i as makeEllipsoid, l as makeVertex, n as makeCone, o as makeSolid, r as makeCylinder, s as makeSphere, t as makeCompound, u as weldShellsAndFaces, w as propagateMetadataByHash, x as collectInputFaceHashes } from "./solidBuilders-Cyfx4vIB.js";
+import { _ as makeThreePointArc, a as makeNonPlanarFace, c as makeBSplineApproximation, d as makeCircle, f as makeEllipse, g as makeTangentArc, h as makeLine, i as makeNewFaceWithinFace, m as makeHelix, o as makePolygon, p as makeEllipseArc, r as makeFace, s as assembleWire, t as addHolesInFace, u as makeBezierCurve } from "./surfaceBuilders-BCDBd5Ii.js";
 //#region src/topology/transformFns.ts
 /**
 * Immutable shape transforms — translate, rotate, scale, mirror, applyMatrix.
@@ -163,7 +163,9 @@ function applyMatrix(shape, matrix) {
 		propagateAllMetadata(evolution, [shape], result);
 		return ok(result);
 	}
-	const result = castResultShape(getKernel().generalTransformNonOrthogonal(shape.wrapped, linear, translation));
+	/* v8 ignore start -- untestable until WASM is rebuilt with BRepBuilderAPI_GTransform */
+	const resultShape = getKernel().generalTransformNonOrthogonal(shape.wrapped, linear, translation);
+	const result = castResultShape(resultShape);
 	propagateMetadataByHash([shape], result);
 	return ok(result);
 	/* v8 ignore stop */

package/dist/projection.cjs

@@ -1,5 +1,5 @@
 Object.defineProperty(exports, Symbol.toStringTag, { value: "Module" });
-const require_cameraFns = require("./cameraFns-j2I9G3L_.cjs");
+const require_cameraFns = require("./cameraFns-CFVDwvGj.cjs");
 exports.PROJECTION_PLANES = require_cameraFns.PROJECTION_PLANES;
 exports.cameraFromPlane = require_cameraFns.cameraFromPlane;
 exports.cameraLookAt = require_cameraFns.cameraLookAt;

package/dist/projection.js

@@ -1,2 +1,2 @@
-import { a as makeProjectedEdges, i as projectEdges, n as cameraLookAt, o as PROJECTION_PLANES, r as createCamera, s as isProjectionPlane, t as cameraFromPlane } from "./cameraFns-CGMawqfi.js";
+import { a as makeProjectedEdges, i as projectEdges, n as cameraLookAt, o as PROJECTION_PLANES, r as createCamera, s as isProjectionPlane, t as cameraFromPlane } from "./cameraFns-USpwGr6_.js";
 export { PROJECTION_PLANES, cameraFromPlane, cameraLookAt, createCamera, isProjectionPlane, makeProjectedEdges, projectEdges };

package/dist/query.cjs

@@ -1,6 +1,6 @@
 Object.defineProperty(exports, Symbol.toStringTag, { value: "Module" });
-const require_helpers = require("./helpers-DuTAcGVX.cjs");
-const require_cornerFinder = require("./cornerFinder-CPwSLgpM.cjs");
+const require_helpers = require("./helpers-CeX5zwCS.cjs");
+const require_cornerFinder = require("./cornerFinder-DyWf9i1I.cjs");
 exports.cornerFinder = require_cornerFinder.cornerFinder;
 exports.edgeFinder = require_helpers.edgeFinder;
 exports.faceFinder = require_helpers.faceFinder;

package/dist/query.js

@@ -1,3 +1,3 @@
-import { n as edgeFinder, r as faceFinder, t as getSingleFace } from "./helpers-CZsK8STz.js";
-import { t as cornerFinder } from "./cornerFinder-CaXBdZz9.js";
+import { n as edgeFinder, r as faceFinder, t as getSingleFace } from "./helpers-ClZ_C5nP.js";
+import { t as cornerFinder } from "./cornerFinder-CIiXl5Kq.js";
 export { cornerFinder, edgeFinder, faceFinder, getSingleFace };

package/dist/{refResolveFns-CnPEaqHw.cjs → refResolveFns-D_RnidoD.cjs}

@@ -1,9 +1,9 @@
-const require_shapeTypes = require("./shapeTypes-DZKuRt24.cjs");
-const require_topologyQueryFns = require("./topologyQueryFns-DZUpJz2p.cjs");
-const require_faceFns = require("./faceFns-UozswcwP.cjs");
-const require_shapeFns = require("./shapeFns-BLZ1dDSz.cjs");
-const require_measureFns = require("./measureFns-Cao9gY1L.cjs");
-const require_adjacencyFns = require("./adjacencyFns-BJ6jcQ-N.cjs");
+const require_shapeTypes = require("./shapeTypes-Dm6f4xsN.cjs");
+const require_topologyQueryFns = require("./topologyQueryFns-RjAzu76K.cjs");
+const require_faceFns = require("./faceFns-D9LdZArB.cjs");
+const require_shapeFns = require("./shapeFns-XPAVA2ZZ.cjs");
+const require_measureFns = require("./measureFns-D3wAgSGr.cjs");
+const require_adjacencyFns = require("./adjacencyFns-Dxx7ftVV.cjs");
 //#region src/topology/shapeRef/scoring.ts
 /**
 * Default face scorer combining surface type, normal alignment, centroid proximity,
@@ -18,8 +18,10 @@ const require_adjacencyFns = require("./adjacencyFns-BJ6jcQ-N.cjs");
 function defaultScorer(hint, face) {
 	let score = 0;
 	const faceType = require_faceFns.faceGeomType(face);
-	if (hint.surfaceType !== void 0) if (faceType === hint.surfaceType) score += 1;
-	else return -Infinity;
+	if (hint.surfaceType !== void 0) {
+		if (faceType === hint.surfaceType) score += 1;
+		else return -Infinity;
+	}
 	if (hint.normal !== void 0) {
 		const faceNormal = require_faceFns.normalAt(face);
 		const dot = hint.normal[0] * faceNormal[0] + hint.normal[1] * faceNormal[1] + hint.normal[2] * faceNormal[2];

package/dist/{refResolveFns-DqY7Cd00.js → refResolveFns-DxjdVw1p.js}

@@ -1,9 +1,9 @@
-import { K as getKernel, g as disposeTransientSubShape, o as castShapeWithKnownType } from "./shapeTypes-bHlssytH.js";
-import { C as vertexPosition, c as getFaces } from "./topologyQueryFns-DVhWxBwT.js";
-import { i as faceGeomType, l as normalAt, r as faceCenter } from "./faceFns-Ce7Fq6j5.js";
-import { n as getHashCode } from "./shapeFns-mYczuWOy.js";
-import { n as measureArea, s as measureLength } from "./measureFns-BbLLBg5q.js";
-import { a as facesOfVertex, c as verticesOfFace, i as facesOfEdge, o as sharedEdges, s as verticesOfEdge, t as adjacentFaceHashes } from "./adjacencyFns-CnehwLNj.js";
+import { K as getKernel, g as disposeTransientSubShape, o as castShapeWithKnownType } from "./shapeTypes-7_c5mEYb.js";
+import { C as vertexPosition, c as getFaces } from "./topologyQueryFns-Bihcwoz0.js";
+import { i as faceGeomType, l as normalAt, r as faceCenter } from "./faceFns-Dy4lA0f_.js";
+import { n as getHashCode } from "./shapeFns-lw5Mzj__.js";
+import { n as measureArea, s as measureLength } from "./measureFns-B9CjOY97.js";
+import { a as facesOfVertex, c as verticesOfFace, i as facesOfEdge, o as sharedEdges, s as verticesOfEdge, t as adjacentFaceHashes } from "./adjacencyFns-Syimhi5A.js";
 //#region src/topology/shapeRef/scoring.ts
 /**
 * Default face scorer combining surface type, normal alignment, centroid proximity,
@@ -18,8 +18,10 @@ import { a as facesOfVertex, c as verticesOfFace, i as facesOfEdge, o as sharedE
 function defaultScorer(hint, face) {
 	let score = 0;
 	const faceType = faceGeomType(face);
-	if (hint.surfaceType !== void 0) if (faceType === hint.surfaceType) score += 1;
-	else return -Infinity;
+	if (hint.surfaceType !== void 0) {
+		if (faceType === hint.surfaceType) score += 1;
+		else return -Infinity;
+	}
 	if (hint.normal !== void 0) {
 		const faceNormal = normalAt(face);
 		const dot = hint.normal[0] * faceNormal[0] + hint.normal[1] * faceNormal[1] + hint.normal[2] * faceNormal[2];

package/dist/{rolldown-runtime-DakpK96I.cjs → rolldown-runtime-C0BPl7ul.cjs}

@@ -24,7 +24,7 @@ var __copyProps = (to, from, except, desc) => {
 	}
 	return to;
 };
-var __toESM = (mod, isNodeMode, target) => (target = mod != null ? __create(__getProtoOf(mod)) : {}, __copyProps(isNodeMode || !mod || !mod.__esModule ? __defProp(target, "default", {
+var __toESM = (mod, isNodeMode, target) => (target = mod != null ? __create(__getProtoOf(mod)) : {}, __copyProps(isNodeMode || !mod || !mod.__esModule || !__hasOwnProp.call(mod, "default") ? __defProp(target, "default", {
 	value: mod,
 	enumerable: true
 }) : target, mod));

package/dist/{shapeFns-BLZ1dDSz.cjs → shapeFns-XPAVA2ZZ.cjs}

@@ -1,6 +1,6 @@
-const require_shapeTypes = require("./shapeTypes-DZKuRt24.cjs");
+const require_shapeTypes = require("./shapeTypes-Dm6f4xsN.cjs");
 const require_errors = require("./errors-RHkKO5bZ.cjs");
-const require_topologyQueryFns = require("./topologyQueryFns-DZUpJz2p.cjs");
+const require_topologyQueryFns = require("./topologyQueryFns-RjAzu76K.cjs");
 const require_constants = require("./constants-BOVyEYGH.cjs");
 //#region src/topology/shapeFns.ts
 /**

package/dist/{shapeFns-mYczuWOy.js → shapeFns-lw5Mzj__.js}

@@ -1,6 +1,6 @@
-import { K as getKernel } from "./shapeTypes-bHlssytH.js";
+import { K as getKernel } from "./shapeTypes-7_c5mEYb.js";
 import { t as BrepErrorCode } from "./errors-MHLiNE-C.js";
-import { T as kernelCallRaw, w as kernelCall } from "./topologyQueryFns-DVhWxBwT.js";
+import { T as kernelCallRaw, w as kernelCall } from "./topologyQueryFns-Bihcwoz0.js";
 import { n as HASH_CODE_MAX } from "./constants-ITRzCnCp.js";
 //#region src/topology/shapeFns.ts
 /**

package/dist/shapeRef.cjs

@@ -1,5 +1,5 @@
 Object.defineProperty(exports, Symbol.toStringTag, { value: "Module" });
-const require_refResolveFns = require("./refResolveFns-CnPEaqHw.cjs");
+const require_refResolveFns = require("./refResolveFns-D_RnidoD.cjs");
 exports.assignRoles = require_refResolveFns.assignRoles;
 exports.captureHint = require_refResolveFns.captureHint;
 exports.createDerivedFaceRef = require_refResolveFns.createDerivedFaceRef;

package/dist/shapeRef.js

@@ -1,2 +1,2 @@
-import { _ as createRef, a as isVertexRef, b as defaultScorer, c as resolveRefParams, d as createVertexRef, f as resolveVertexRef, g as captureHint, h as assignRoles, i as isLineageRef, l as createDerivedFaceRef, m as resolveEdgeRef, n as isEdgeRef, o as resolveLineageRef, p as createEdgeRef, r as isFaceRef, s as resolveRefIn, t as isDerivedFaceRef, u as resolveDerivedFaceRef, v as resolveRef, y as updateRoles } from "./refResolveFns-DqY7Cd00.js";
+import { _ as createRef, a as isVertexRef, b as defaultScorer, c as resolveRefParams, d as createVertexRef, f as resolveVertexRef, g as captureHint, h as assignRoles, i as isLineageRef, l as createDerivedFaceRef, m as resolveEdgeRef, n as isEdgeRef, o as resolveLineageRef, p as createEdgeRef, r as isFaceRef, s as resolveRefIn, t as isDerivedFaceRef, u as resolveDerivedFaceRef, v as resolveRef, y as updateRoles } from "./refResolveFns-DxjdVw1p.js";
 export { assignRoles, captureHint, createDerivedFaceRef, createEdgeRef, createRef, createVertexRef, defaultScorer, isDerivedFaceRef, isEdgeRef, isFaceRef, isLineageRef, isVertexRef, resolveDerivedFaceRef, resolveEdgeRef, resolveLineageRef, resolveRef, resolveRefIn, resolveRefParams, resolveVertexRef, updateRoles };

package/dist/{shapeTypes-bHlssytH.js → shapeTypes-7_c5mEYb.js}

@@ -1,4 +1,4 @@
-import { A as EXACT_BREP_CAPABILITIES, C as serializeCurve2d$2, D as UnsupportedKernelOperationError, E as quickHull, O as isUnsupportedKernelOperationError, S as scaleCurve2d$2, T as translateCurve2d$2, _ as makeEllipse2d$2, a as buildBinarySTL, b as mirrorAtPoint, c as curveBounds, d as evaluateCurve2d$2, f as intersectCurves2dFn, g as makeCircle2d$2, h as makeBezier2d$2, i as buildAsciiSTL, l as curveTypeName, m as makeArc2dThreePoints, n as DEFAULT_STL_ANGULAR_TOLERANCE, o as addCurveToBBox, p as makeArc2dTangent, r as DEFAULT_STL_TOLERANCE, s as createBBox2d, t as OcctWasmAdapter, u as deserializeCurve2d$2, v as makeLine2d$2, w as tangentCurve2d, x as rotateCurve2d$2, y as mirrorAcrossAxis } from "./occtWasmAdapter-BQKQXF63.js";
+import { A as EXACT_BREP_CAPABILITIES, C as serializeCurve2d$2, D as UnsupportedKernelOperationError, E as quickHull, O as isUnsupportedKernelOperationError, S as scaleCurve2d$2, T as translateCurve2d$2, _ as makeEllipse2d$2, a as buildBinarySTL, b as mirrorAtPoint, c as curveBounds, d as evaluateCurve2d$2, f as intersectCurves2dFn, g as makeCircle2d$2, h as makeBezier2d$2, i as buildAsciiSTL, l as curveTypeName, m as makeArc2dThreePoints, n as DEFAULT_STL_ANGULAR_TOLERANCE, o as addCurveToBBox, p as makeArc2dTangent, r as DEFAULT_STL_TOLERANCE, s as createBBox2d, t as OcctWasmAdapter, u as deserializeCurve2d$2, v as makeLine2d$2, w as tangentCurve2d, x as rotateCurve2d$2, y as mirrorAcrossAxis } from "./occtWasmAdapter-BEe---7w.js";
 import { i as wasmIndex, r as vec3At } from "./bug-BdOHwn_e.js";
 //#region src/kernel/quality.ts
 /**
@@ -2176,9 +2176,7 @@ function transformBatch$2(oc, entries) {
 					case "scale":
 						batch.addScale(e.shape, ...e.center, e.factor);
 						break;
-					case "mirror":
-						batch.addMirror(e.shape, ...e.origin, ...e.normal);
-						break;
+					case "mirror": batch.addMirror(e.shape, ...e.origin, ...e.normal);
 				}
 				const result = batch.execute();
 				try {
@@ -3956,7 +3954,8 @@ function makeFaceOnSurface$1(oc, surfaceOrFace, wire) {
 function bsplineSurface$1(oc, points, rows, cols) {
 	const arr = new oc.TColgp_Array2OfPnt_2(1, rows, 1, cols);
 	for (let r = 0; r < rows; r++) for (let c = 0; c < cols; c++) {
-		const pt = wasmIndex(points, r * cols + c);
+		const idx = r * cols + c;
+		const pt = wasmIndex(points, idx);
 		const pnt = new oc.gp_Pnt_3(pt[0], pt[1], pt[2]);
 		arr.SetValue_1(r + 1, c + 1, pnt);
 		pnt.delete();
@@ -4741,7 +4740,8 @@ function transformCurve2dGeneral$1(curve, gtrsf) {
 	const N = 20;
 	const pts = [];
 	for (let i = 0; i <= N; i++) {
-		const [px, py] = evaluateCurve2d$2(c, bounds.first + (bounds.last - bounds.first) * i / N);
+		const t = bounds.first + (bounds.last - bounds.first) * i / N;
+		const [px, py] = evaluateCurve2d$2(c, t);
 		pts.push([m0 * px + m1 * py + tx, m3 * px + m4 * py + ty]);
 	}
 	return makeBezier2d$2(pts);
@@ -4874,7 +4874,8 @@ function approximateCurve2dAsBSpline$1(curve, tol, cont, maxSeg) {
 		}
 		maxErr = 0;
 		for (let i = 0; i < curN; i++) {
-			const [ex, ey] = evaluateCurve2d$2(c, bounds.first + (bounds.last - bounds.first) * (i + .5) / curN);
+			const tMid = bounds.first + (bounds.last - bounds.first) * (i + .5) / curN;
+			const [ex, ey] = evaluateCurve2d$2(c, tMid);
 			const p0 = wasmIndex(poles, i);
 			const p1 = wasmIndex(poles, i + 1);
 			const mx = (p0[0] + p1[0]) / 2;
@@ -5123,7 +5124,8 @@ function liftCurve2dToPlane$1(oc, curve, planeOrigin, planeZ, planeX) {
 	const nSamples = 60;
 	const pts3d = [];
 	for (let i = 0; i <= nSamples; i++) {
-		const [u, v] = evaluateCurve2d$2(c, bounds.first + (bounds.last - bounds.first) * i / nSamples);
+		const t = bounds.first + (bounds.last - bounds.first) * i / nSamples;
+		const [u, v] = evaluateCurve2d$2(c, t);
 		pts3d.push(lift(u, v));
 	}
 	return interpolatePoints3d(oc, pts3d);
@@ -5134,7 +5136,8 @@ function buildEdgeOnSurface$1(oc, curve, surface) {
 	const N = 60;
 	const pts3d = [];
 	for (let i = 0; i <= N; i++) {
-		const [u, v] = evaluateCurve2d$2(c, bounds.first + (bounds.last - bounds.first) * i / N);
+		const t = bounds.first + (bounds.last - bounds.first) * i / N;
+		const [u, v] = evaluateCurve2d$2(c, t);
 		const gpPnt = surface.get().Value(u, v);
 		pts3d.push([
 			gpPnt.X(),
@@ -8355,7 +8358,8 @@ function exportSTEP(bk, shapes) {
 	return parts.join("\n");
 }
 function exportSTL$1(bk, shape, binary, tolerance = DEFAULT_STL_TOLERANCE, angularTolerance = DEFAULT_STL_ANGULAR_TOLERANCE) {
-	const { vertices, triangles } = mesh$1(bk, solidHandle(wasmIndex(unwrapSolidsForExport(bk, shape, "exportSTL"), 0)), {
+	const solidIds = unwrapSolidsForExport(bk, shape, "exportSTL");
+	const { vertices, triangles } = mesh$1(bk, solidHandle(wasmIndex(solidIds, 0)), {
 		tolerance,
 		angularTolerance,
 		skipNormals: true
@@ -8609,7 +8613,6 @@ function reverseCurve2d(curve) {
 			if (Array.isArray(m.weights)) m.weights = [...m.weights].reverse();
 			break;
 		}
-		default: break;
 	}
 }
 function copyCurve2d(curve) {
@@ -8801,7 +8804,8 @@ function transformCurve2dGeneral(curve, gtrsf) {
 	const N = 20;
 	const pts = [];
 	for (let i = 0; i <= N; i++) {
-		const [px, py] = evaluateCurve2d$2(c, bounds.first + (bounds.last - bounds.first) * i / N);
+		const t = bounds.first + (bounds.last - bounds.first) * i / N;
+		const [px, py] = evaluateCurve2d$2(c, t);
 		pts.push([m0 * px + m1 * py + tx, m3 * px + m4 * py + ty]);
 	}
 	return makeBezier2d$2(pts);
@@ -8934,7 +8938,8 @@ function approximateCurve2dAsBSpline(curve, tol, cont, maxSeg) {
 		}
 		maxErr = 0;
 		for (let i = 0; i < N; i++) {
-			const [ex, ey] = evaluateCurve2d$2(c, bounds.first + (bounds.last - bounds.first) * (i + .5) / N);
+			const tMid = bounds.first + (bounds.last - bounds.first) * (i + .5) / N;
+			const [ex, ey] = evaluateCurve2d$2(c, tMid);
 			const p0 = wasmIndex(poles, i);
 			const p1 = wasmIndex(poles, i + 1);
 			const mx = (p0[0] + p1[0]) / 2;
@@ -9165,7 +9170,8 @@ function liftCurve2dToPlane(bk, curve, origin, planeZ, planeX) {
 	const nSamples = 100;
 	const points = [];
 	for (let i = 0; i <= nSamples; i++) {
-		const [u, v] = evaluateCurve2d$2(c, bounds.first + (bounds.last - bounds.first) * i / nSamples);
+		const t = bounds.first + (bounds.last - bounds.first) * i / nSamples;
+		const [u, v] = evaluateCurve2d$2(c, t);
 		points.push(lift(u, v));
 	}
 	return interpolatePoints(bk, points);
@@ -9178,7 +9184,8 @@ function buildEdgeOnSurface(bk, curve, surface) {
 	const N = bk.getSurfaceType(fid) === "plane" ? 50 : 100;
 	const points = [];
 	for (let i = 0; i <= N; i++) {
-		const [u, v] = evaluateCurve2d$2(c, bounds.first + (bounds.last - bounds.first) * i / N);
+		const t = bounds.first + (bounds.last - bounds.first) * i / N;
+		const [u, v] = evaluateCurve2d$2(c, t);
 		points.push(vec3At(bk.evaluateSurface(fid, u, v)));
 	}
 	return interpolatePoints(bk, points);
@@ -9908,6 +9915,7 @@ function makeSweepOps$1(bk) {
 }
 //#endregion
 //#region src/kernel/brepkit/brepkitAdapter.ts
+/* v8 ignore file -- brepkit WASM kernel not available in OCCT test suite */
 /**
 * Kernel-lifecycle ops that call directly into the brepkit WASM instance
 * without delegating through a `*Ops.ts` module. These are too thin to
@@ -14808,7 +14816,7 @@ function segSeg(p1, p2, p3, p4) {
 	if (Math.abs(den) < 1e-15) return null;
 	const t = ((p3[0] - p1[0]) * d2y - (p3[1] - p1[1]) * d2x) / den;
 	const u = ((p3[0] - p1[0]) * d1y - (p3[1] - p1[1]) * d1x) / den;
-	if (t < -1e-9 || t > 1.000000001 || u < -1e-9 || u > 1.000000001) return null;
+	if (t < -1e-9 || t > 1 + 1e-9 || u < -1e-9 || u > 1 + 1e-9) return null;
 	return [p1[0] + d1x * t, p1[1] + d1y * t];
 }
 /**
@@ -15929,7 +15937,7 @@ async function init() {
 	throw new Error("brepjs: no kernel package found. Install one of:\n  npm install occt-wasm            (recommended, default)\n  npm install brepjs-opencascade\n  npm install brepkit-wasm");
 }
 //#endregion
-//#region \0@oxc-project+runtime@0.139.0/helpers/esm/usingCtx.js
+//#region \0@oxc-project+runtime@0.143.0/helpers/esm/usingCtx.js
 function _usingCtx() {
 	var r = "function" == typeof SuppressedError ? SuppressedError : function(r, e) {
 		var n = Error();

package/dist/{shapeTypes-DZKuRt24.cjs → shapeTypes-Dm6f4xsN.cjs}

@@ -1,4 +1,4 @@
-const require_occtWasmAdapter = require("./occtWasmAdapter-Aubfbks6.cjs");
+const require_occtWasmAdapter = require("./occtWasmAdapter-DEpy64ji.cjs");
 const require_bug = require("./bug-O02CsAmt.cjs");
 //#region src/kernel/quality.ts
 /**
@@ -2176,9 +2176,7 @@ function transformBatch$2(oc, entries) {
 					case "scale":
 						batch.addScale(e.shape, ...e.center, e.factor);
 						break;
-					case "mirror":
-						batch.addMirror(e.shape, ...e.origin, ...e.normal);
-						break;
+					case "mirror": batch.addMirror(e.shape, ...e.origin, ...e.normal);
 				}
 				const result = batch.execute();
 				try {
@@ -3956,7 +3954,8 @@ function makeFaceOnSurface$1(oc, surfaceOrFace, wire) {
 function bsplineSurface$1(oc, points, rows, cols) {
 	const arr = new oc.TColgp_Array2OfPnt_2(1, rows, 1, cols);
 	for (let r = 0; r < rows; r++) for (let c = 0; c < cols; c++) {
-		const pt = require_bug.wasmIndex(points, r * cols + c);
+		const idx = r * cols + c;
+		const pt = require_bug.wasmIndex(points, idx);
 		const pnt = new oc.gp_Pnt_3(pt[0], pt[1], pt[2]);
 		arr.SetValue_1(r + 1, c + 1, pnt);
 		pnt.delete();
@@ -8359,7 +8358,8 @@ function exportSTEP(bk, shapes) {
 	return parts.join("\n");
 }
 function exportSTL$1(bk, shape, binary, tolerance = require_occtWasmAdapter.DEFAULT_STL_TOLERANCE, angularTolerance = require_occtWasmAdapter.DEFAULT_STL_ANGULAR_TOLERANCE) {
-	const { vertices, triangles } = mesh$1(bk, solidHandle(require_bug.wasmIndex(unwrapSolidsForExport(bk, shape, "exportSTL"), 0)), {
+	const solidIds = unwrapSolidsForExport(bk, shape, "exportSTL");
+	const { vertices, triangles } = mesh$1(bk, solidHandle(require_bug.wasmIndex(solidIds, 0)), {
 		tolerance,
 		angularTolerance,
 		skipNormals: true
@@ -8613,7 +8613,6 @@ function reverseCurve2d(curve) {
 			if (Array.isArray(m.weights)) m.weights = [...m.weights].reverse();
 			break;
 		}
-		default: break;
 	}
 }
 function copyCurve2d(curve) {
@@ -9916,6 +9915,7 @@ function makeSweepOps$1(bk) {
 }
 //#endregion
 //#region src/kernel/brepkit/brepkitAdapter.ts
+/* v8 ignore file -- brepkit WASM kernel not available in OCCT test suite */
 /**
 * Kernel-lifecycle ops that call directly into the brepkit WASM instance
 * without delegating through a `*Ops.ts` module. These are too thin to
@@ -14816,7 +14816,7 @@ function segSeg(p1, p2, p3, p4) {
 	if (Math.abs(den) < 1e-15) return null;
 	const t = ((p3[0] - p1[0]) * d2y - (p3[1] - p1[1]) * d2x) / den;
 	const u = ((p3[0] - p1[0]) * d1y - (p3[1] - p1[1]) * d1x) / den;
-	if (t < -1e-9 || t > 1.000000001 || u < -1e-9 || u > 1.000000001) return null;
+	if (t < -1e-9 || t > 1 + 1e-9 || u < -1e-9 || u > 1 + 1e-9) return null;
 	return [p1[0] + d1x * t, p1[1] + d1y * t];
 }
 /**
@@ -15937,7 +15937,7 @@ async function init() {
 	throw new Error("brepjs: no kernel package found. Install one of:\n  npm install occt-wasm            (recommended, default)\n  npm install brepjs-opencascade\n  npm install brepkit-wasm");
 }
 //#endregion
-//#region \0@oxc-project+runtime@0.139.0/helpers/esm/usingCtx.js
+//#region \0@oxc-project+runtime@0.143.0/helpers/esm/usingCtx.js
 function _usingCtx() {
 	var r = "function" == typeof SuppressedError ? SuppressedError : function(r, e) {
 		var n = Error();