brepjs 18.119.2 → 18.119.4

package/dist/{errors-CJU8CHng.cjs → errors-RHkKO5bZ.cjs}

@@ -165,97 +165,6 @@ function pipeline(input) {
 	return makePipeline(initial);
 }
 //#endregion
-//#region src/core/kernelErrorTranslation.ts
-/**
-* Kernel error translation — maps cryptic kernel messages to user-friendly explanations.
-*
-* Extracted from errors.ts to separate pure type/constructor definitions
-* from OCCT-specific regex matching logic.
-*/
-/**
-* Common kernel error patterns and their user-friendly translations.
-* Used by kernelCall to provide actionable error messages.
-*/
-var kernel_ERROR_PATTERNS = [
-	{
-		pattern: /invalid edge configuration|edges?.*(not|fail|invalid)/i,
-		translation: "The edges may not form a continuous loop. Check that edges connect end-to-end without gaps."
-	},
-	{
-		pattern: /BRepAlgoAPI.*failed|boolean.*operation.*failed/i,
-		translation: "Boolean operation failed. Common causes: overlapping faces, zero-thickness geometry, or degenerate shapes. Try healing input shapes first."
-	},
-	{
-		pattern: /fillet.*radius.*too.*large|fillet.*failed/i,
-		translation: "Fillet operation failed. The radius may be too large for the selected edges. Try reducing the radius or check that edges have enough room."
-	},
-	{
-		pattern: /chamfer.*failed|chamfer.*distance.*too.*large/i,
-		translation: "Chamfer operation failed. The distance may be too large for the selected edges. Try reducing the distance or check edge geometry."
-	},
-	{
-		pattern: /shell.*failed|offset.*failed/i,
-		translation: "Shell/offset operation failed. The thickness may be too large, or the shape may have complex geometry. Try reducing thickness."
-	},
-	{
-		pattern: /sweep.*failed|pipe.*failed/i,
-		translation: "Sweep operation failed. Check that the profile and spine are compatible, and that the spine has no sharp twists or self-intersections."
-	},
-	{
-		pattern: /loft.*failed/i,
-		translation: "Loft operation failed. Profiles may be incompatible or have different orientations. Ensure profiles are ordered consistently."
-	},
-	{
-		pattern: /extrude.*failed|prism.*failed/i,
-		translation: "Extrusion failed. The profile may be invalid or self-intersecting. Check that the profile forms a valid closed wire."
-	},
-	{
-		pattern: /revolve.*failed|revolution.*failed/i,
-		translation: "Revolution operation failed. The profile may intersect the axis of revolution, or the angle may be invalid."
-	},
-	{
-		pattern: /self.*intersect|self-intersect/i,
-		translation: "Shape has self-intersections. The operation resulted in overlapping geometry. Simplify the input or adjust parameters."
-	},
-	{
-		pattern: /degener|degenerat/i,
-		translation: "Degenerate geometry detected. The shape has edges or faces with zero length/area. Check input geometry for collapsed elements."
-	},
-	{
-		pattern: /BRepCheck.*fail|shape.*invalid|shape.*not.*valid/i,
-		translation: "Shape validation failed. The resulting shape has invalid topology. Try healing the shape or checking input geometry."
-	}
-];
-var ERROR_CODE_SUGGESTIONS = {
-	FUSE_FAILED: "Try autoHeal() on both operands before the boolean operation. Check for overlapping faces or zero-thickness geometry.",
-	CUT_FAILED: "Try autoHeal() on both operands before the boolean operation. Check for overlapping faces or zero-thickness geometry.",
-	FUSE_NOT_3D: "The boolean result was not a 3D solid. Ensure both input shapes are valid 3D solids, not shells or open surfaces.",
-	CUT_NOT_3D: "The boolean result was not a 3D solid. Ensure both input shapes are valid 3D solids, not shells or open surfaces.",
-	INTERSECT_NOT_3D: "The boolean result was not a 3D solid. Ensure both input shapes are valid 3D solids, not shells or open surfaces.",
-	SWEEP_FAILED: "Ensure the spine curve has no sharp corners or self-intersections. Try simplifying the profile or using a smoother path.",
-	LOFT_FAILED: "Check that all profiles have the same number of edges and consistent orientation. Try reordering profiles.",
-	FILLET_NOT_3D: "The fillet radius may be too large for the selected edges. Try a smaller radius or check that adjacent faces have enough room.",
-	CHAMFER_NOT_3D: "The chamfer distance may be too large. Try a smaller distance or check edge geometry.",
-	SHELL_NOT_3D: "The shell thickness may be too large for the shape. Try reducing thickness or removing problematic faces.",
-	OFFSET_NOT_3D: "The offset distance may be too large for the shape geometry. Try a smaller distance.",
-	DRAFT_FAILED: "The draft angle may be too large or the selected faces incompatible. Try a smaller angle or different faces."
-};
-/** Look up an actionable suggestion for a given error code. */
-function getSuggestionForCode(code) {
-	return ERROR_CODE_SUGGESTIONS[code];
-}
-/**
-* Translate an kernel error message into a user-friendly explanation.
-* If no pattern matches, returns the original message.
-*
-* @param kernelMessage - The raw error message from kernel
-* @returns User-friendly error message with actionable guidance
-*/
-function translateKernelError(kernelMessage) {
-	for (const { pattern, translation } of kernel_ERROR_PATTERNS) if (pattern.test(kernelMessage)) return `${translation} (kernel: ${kernelMessage})`;
-	return kernelMessage;
-}
-//#endregion
 //#region src/core/errors.ts
 /**
 * Domain error types and constructors for brepjs.
@@ -528,12 +437,6 @@ Object.defineProperty(exports, "fromNullable", {
 		return fromNullable;
 	}
 });
-Object.defineProperty(exports, "getSuggestionForCode", {
-	enumerable: true,
-	get: function() {
-		return getSuggestionForCode;
-	}
-});
 Object.defineProperty(exports, "ioError", {
 	enumerable: true,
 	get: function() {
@@ -642,12 +545,6 @@ Object.defineProperty(exports, "tapErr", {
 		return tapErr;
 	}
 });
-Object.defineProperty(exports, "translateKernelError", {
-	enumerable: true,
-	get: function() {
-		return translateKernelError;
-	}
-});
 Object.defineProperty(exports, "tryCatch", {
 	enumerable: true,
 	get: function() {

package/dist/{faceFns-CPswi9Cm.cjs → faceFns-BK4r7Dxk.cjs}

@@ -1,6 +1,6 @@
-const require_shapeTypes = require("./shapeTypes-Bpsu5KJO.cjs");
-const require_errors = require("./errors-CJU8CHng.cjs");
-const require_topologyQueryFns = require("./topologyQueryFns-C3fhJndG.cjs");
+const require_shapeTypes = require("./shapeTypes-CkcIL7zv.cjs");
+const require_errors = require("./errors-RHkKO5bZ.cjs");
+const require_topologyQueryFns = require("./topologyQueryFns-Bia7o8l_.cjs");
 const require_types = require("./types-KjA8tY4Y.cjs");
 //#region src/topology/cast.ts
 var TOPO_ENUM = {

package/dist/{faceFns-CB6uzvOg.js → faceFns-DJj9Nb6T.js}

@@ -1,6 +1,6 @@
-import { i as castShape, it as getKernel } from "./shapeTypes-CnKFSfDT.js";
-import { I as unwrap, O as ok, l as typeCastError, v as err } from "./errors-B3CDG537.js";
-import { a as getCachedSurfaceType } from "./topologyQueryFns-DNqT88yx.js";
+import { K as getKernel, i as castShape } from "./shapeTypes-t49f64Dx.js";
+import { E as ok, P as unwrap, g as err, l as typeCastError } from "./errors-MHLiNE-C.js";
+import { a as getCachedSurfaceType } from "./topologyQueryFns-BkQ6Q7gN.js";
 import { r as toVec3 } from "./types-D24Y27N0.js";
 //#region src/topology/cast.ts
 var TOPO_ENUM = {

package/dist/{healingFns-BFTYLiAm.js → healingFns-DxcRyVCG.js}

@@ -1,11 +1,10 @@
-import { C as isSolid, R as getShapeKind, T as isWire, h as disposeResultShape, i as castShape, it as getKernel, m as disposeDowncastSource, n as castResultShape, x as isShape3D, y as isFace } from "./shapeTypes-CnKFSfDT.js";
-import { C as isOk, O as ok, S as isErr, d as validationError, i as kernelError, l as typeCastError, t as BrepErrorCode, v as err } from "./errors-B3CDG537.js";
-import { c as getFaces, i as getCachedIsValid, m as invalidateShapeCache, p as getWires, s as getEdges } from "./topologyQueryFns-DNqT88yx.js";
+import { C as isSolid, E as getShapeKind, K as getKernel, T as isWire, h as disposeResultShape, i as castShape, m as disposeDowncastSource, n as castResultShape, x as isShape3D, y as isFace } from "./shapeTypes-t49f64Dx.js";
+import { E as ok, b as isErr, d as validationError, g as err, i as kernelError, l as typeCastError, t as BrepErrorCode, x as isOk } from "./errors-MHLiNE-C.js";
+import { c as getFaces, i as getCachedIsValid, m as invalidateShapeCache, p as getWires, s as getEdges } from "./topologyQueryFns-BkQ6Q7gN.js";
 import { n as HASH_CODE_MAX } from "./constants-ITRzCnCp.js";
-import { y as downcast } from "./faceFns-CB6uzvOg.js";
-import { _ as collectInputFaceHashes, y as propagateAllMetadata } from "./shapeFns-BrHFNLMA.js";
+import { y as downcast } from "./faceFns-DJj9Nb6T.js";
+import { C as propagateAllMetadata, f as cut, h as fuseAll, m as fuse, p as cutAll, x as collectInputFaceHashes } from "./solidBuilders-DTgqQC3W.js";
 import { t as firstOrThrow } from "./arrayAccess-DrUGPADn.js";
-import { f as cut, h as fuseAll, m as fuse, p as cutAll } from "./solidBuilders-I8_V8qqU.js";
 //#region src/topology/threeHelpers.ts
 /**
 * Convert a ShapeMesh into BufferGeometry-compatible typed arrays.

package/dist/{healingFns-bhMxTTqw.cjs → healingFns-Hx4oTlq8.cjs}

@@ -1,11 +1,10 @@
-const require_shapeTypes = require("./shapeTypes-Bpsu5KJO.cjs");
-const require_errors = require("./errors-CJU8CHng.cjs");
-const require_topologyQueryFns = require("./topologyQueryFns-C3fhJndG.cjs");
+const require_shapeTypes = require("./shapeTypes-CkcIL7zv.cjs");
+const require_errors = require("./errors-RHkKO5bZ.cjs");
+const require_topologyQueryFns = require("./topologyQueryFns-Bia7o8l_.cjs");
 const require_constants = require("./constants-BOVyEYGH.cjs");
-const require_faceFns = require("./faceFns-CPswi9Cm.cjs");
-const require_shapeFns = require("./shapeFns-qm9VRo4i.cjs");
+const require_faceFns = require("./faceFns-BK4r7Dxk.cjs");
+const require_solidBuilders = require("./solidBuilders-IiIzjKAr.cjs");
 const require_arrayAccess = require("./arrayAccess-e4H9cBfh.cjs");
-const require_solidBuilders = require("./solidBuilders-Bp7lQW62.cjs");
 //#region src/topology/threeHelpers.ts
 /**
 * Convert a ShapeMesh into BufferGeometry-compatible typed arrays.
@@ -376,7 +375,7 @@ function fuseWithEvolution(a, b, { optimisation = "none", simplify = false, sign
 	if (require_errors.isErr(checkA)) return checkA;
 	const checkB = validateShape3D(b, "fuseWithEvolution: second operand");
 	if (require_errors.isErr(checkB)) return checkB;
-	const inputFaceHashes = require_shapeFns.collectInputFaceHashes([a, b]);
+	const inputFaceHashes = require_solidBuilders.collectInputFaceHashes([a, b]);
 	const { shape: resultShape, evolution } = require_shapeTypes.getKernel().fuseWithHistory(a.wrapped, b.wrapped, inputFaceHashes, require_constants.HASH_CODE_MAX, {
 		optimisation,
 		simplify,
@@ -384,7 +383,7 @@ function fuseWithEvolution(a, b, { optimisation = "none", simplify = false, sign
 	});
 	const fuseResult = castToShape3D(resultShape, "FUSE_NOT_3D", "Fuse did not produce a 3D shape", "Common causes: overlapping coplanar faces, zero-thickness geometry, or non-manifold input. Try autoHeal() on inputs first.");
 	if (fuseResult.ok) {
-		require_shapeFns.propagateAllMetadata(evolution, [a, b], fuseResult.value);
+		require_solidBuilders.propagateAllMetadata(evolution, [a, b], fuseResult.value);
 		return require_errors.ok({
 			shape: fuseResult.value,
 			evolution
@@ -398,7 +397,7 @@ function cutWithEvolution(base, tool, { optimisation = "none", simplify = false,
 	if (require_errors.isErr(checkBase)) return checkBase;
 	const checkTool = validateShape3D(tool, "cutWithEvolution: tool");
 	if (require_errors.isErr(checkTool)) return checkTool;
-	const inputFaceHashes = require_shapeFns.collectInputFaceHashes([base, tool]);
+	const inputFaceHashes = require_solidBuilders.collectInputFaceHashes([base, tool]);
 	const { shape: resultShape, evolution } = require_shapeTypes.getKernel().cutWithHistory(base.wrapped, tool.wrapped, inputFaceHashes, require_constants.HASH_CODE_MAX, {
 		optimisation,
 		simplify,
@@ -406,7 +405,7 @@ function cutWithEvolution(base, tool, { optimisation = "none", simplify = false,
 	});
 	const cutResult = castToShape3D(resultShape, "CUT_NOT_3D", "Cut did not produce a 3D shape", "Common causes: tool does not fully intersect the base, or produces a zero-thickness sliver. Ensure the tool extends through the shape.");
 	if (cutResult.ok) {
-		require_shapeFns.propagateAllMetadata(evolution, [base, tool], cutResult.value);
+		require_solidBuilders.propagateAllMetadata(evolution, [base, tool], cutResult.value);
 		return require_errors.ok({
 			shape: cutResult.value,
 			evolution
@@ -420,14 +419,14 @@ function intersectWithEvolution(a, b, { simplify = false, signal, fuzzyValue } =
 	if (require_errors.isErr(checkA)) return checkA;
 	const checkB = validateShape3D(b, "intersectWithEvolution: second operand");
 	if (require_errors.isErr(checkB)) return checkB;
-	const inputFaceHashes = require_shapeFns.collectInputFaceHashes([a, b]);
+	const inputFaceHashes = require_solidBuilders.collectInputFaceHashes([a, b]);
 	const { shape: resultShape, evolution } = require_shapeTypes.getKernel().intersectWithHistory(a.wrapped, b.wrapped, inputFaceHashes, require_constants.HASH_CODE_MAX, {
 		simplify,
 		fuzzyValue
 	});
 	const intResult = castToShape3D(resultShape, "INTERSECT_NOT_3D", "Intersect did not produce a 3D shape", "Shapes may not overlap. Verify they share a common volume before intersecting.");
 	if (intResult.ok) {
-		require_shapeFns.propagateAllMetadata(evolution, [a, b], intResult.value);
+		require_solidBuilders.propagateAllMetadata(evolution, [a, b], intResult.value);
 		return require_errors.ok({
 			shape: intResult.value,
 			evolution
@@ -462,14 +461,14 @@ function filletWithEvolution(shape, edges, radius) {
 			filteredEdges = [...selectedEdges];
 			kernelRadius = radius;
 		}
-		const inputFaceHashes = require_shapeFns.collectInputFaceHashes([shape]);
+		const inputFaceHashes = require_solidBuilders.collectInputFaceHashes([shape]);
 		const { shape: resultShape, evolution } = require_shapeTypes.getKernel().filletWithHistory(shape.wrapped, filteredEdges.map((e) => e.wrapped), kernelRadius, inputFaceHashes, require_constants.HASH_CODE_MAX);
 		const cast = require_shapeTypes.castResultShape(resultShape);
 		if (!require_shapeTypes.isShape3D(cast)) {
 			require_shapeTypes.disposeResultShape(cast);
 			return require_errors.err(require_errors.kernelError(require_errors.BrepErrorCode.FILLET_NOT_3D, "Fillet result is not a 3D shape"));
 		}
-		require_shapeFns.propagateAllMetadata(evolution, [shape], cast);
+		require_solidBuilders.propagateAllMetadata(evolution, [shape], cast);
 		return require_errors.ok({
 			shape: cast,
 			evolution
@@ -509,14 +508,14 @@ function chamferWithEvolution(shape, edges, distance) {
 			filteredEdges = [...selectedEdges];
 			kernelDistance = distance;
 		}
-		const inputFaceHashes = require_shapeFns.collectInputFaceHashes([shape]);
+		const inputFaceHashes = require_solidBuilders.collectInputFaceHashes([shape]);
 		const { shape: resultShape, evolution } = require_shapeTypes.getKernel().chamferWithHistory(shape.wrapped, filteredEdges.map((e) => e.wrapped), kernelDistance, inputFaceHashes, require_constants.HASH_CODE_MAX);
 		const cast = require_shapeTypes.castResultShape(resultShape);
 		if (!require_shapeTypes.isShape3D(cast)) {
 			require_shapeTypes.disposeResultShape(cast);
 			return require_errors.err(require_errors.kernelError(require_errors.BrepErrorCode.CHAMFER_NOT_3D, "Chamfer result is not a 3D shape"));
 		}
-		require_shapeFns.propagateAllMetadata(evolution, [shape], cast);
+		require_solidBuilders.propagateAllMetadata(evolution, [shape], cast);
 		return require_errors.ok({
 			shape: cast,
 			evolution
@@ -544,14 +543,14 @@ function shellWithEvolution(shape, faces, thickness, tolerance = .001) {
 	if (thickness <= 0) return require_errors.err(require_errors.validationError("INVALID_THICKNESS", "Shell thickness must be positive"));
 	if (faces.length === 0) return require_errors.err(require_errors.validationError("NO_FACES", "At least one face must be specified for shell"));
 	try {
-		const inputFaceHashes = require_shapeFns.collectInputFaceHashes([shape]);
+		const inputFaceHashes = require_solidBuilders.collectInputFaceHashes([shape]);
 		const { shape: resultShape, evolution } = require_shapeTypes.getKernel().shellWithHistory(shape.wrapped, faces.map((f) => f.wrapped), thickness, inputFaceHashes, require_constants.HASH_CODE_MAX, tolerance);
 		const cast = require_shapeTypes.castResultShape(resultShape);
 		if (!require_shapeTypes.isShape3D(cast)) {
 			require_shapeTypes.disposeResultShape(cast);
 			return require_errors.err(require_errors.kernelError("SHELL_RESULT_NOT_3D", "Shell result is not a 3D shape"));
 		}
-		require_shapeFns.propagateAllMetadata(evolution, [shape], cast);
+		require_solidBuilders.propagateAllMetadata(evolution, [shape], cast);
 		return require_errors.ok({
 			shape: cast,
 			evolution
@@ -650,7 +649,7 @@ function finalizeShape3D(evolution, resultShape, inputs, not3dCode, not3dMessage
 		require_shapeTypes.disposeResultShape(cast);
 		return require_errors.err(require_errors.kernelError(not3dCode, not3dMessage));
 	}
-	require_shapeFns.propagateAllMetadata(evolution, inputs, cast);
+	require_solidBuilders.propagateAllMetadata(evolution, inputs, cast);
 	return require_errors.ok(cast);
 }
 /**
@@ -691,10 +690,10 @@ function thicken(shape, thickness) {
 	const check = validateNotNull(shape, "thicken: shape");
 	if (require_errors.isErr(check)) return check;
 	try {
-		const inputFaceHashes = require_shapeFns.collectInputFaceHashes([shape]);
+		const inputFaceHashes = require_solidBuilders.collectInputFaceHashes([shape]);
 		const { shape: resultShape, evolution } = require_shapeTypes.getKernel().thickenWithHistory(shape.wrapped, thickness, inputFaceHashes, require_constants.HASH_CODE_MAX);
 		const cast = require_shapeTypes.castResultShape(resultShape);
-		require_shapeFns.propagateAllMetadata(evolution, [shape], cast);
+		require_solidBuilders.propagateAllMetadata(evolution, [shape], cast);
 		return require_errors.ok(cast);
 	} catch (e) {
 		return require_errors.err(require_errors.kernelError("THICKEN_FAILED", `Thicken operation failed: ${e instanceof Error ? e.message : String(e)}`, e));
@@ -753,7 +752,7 @@ function fillet(shape, edges, radius, { trackEvolution = true } = {}) {
 			}
 			return require_errors.ok(cast);
 		}
-		const inputFaceHashes = require_shapeFns.collectInputFaceHashes([shape]);
+		const inputFaceHashes = require_solidBuilders.collectInputFaceHashes([shape]);
 		const { shape: resultShape, evolution } = require_shapeTypes.getKernel().filletWithHistory(shape.wrapped, edgeShapes, kernelRadius, inputFaceHashes, require_constants.HASH_CODE_MAX);
 		return finalizeShape3D(evolution, resultShape, [shape], require_errors.BrepErrorCode.FILLET_NOT_3D, "Fillet result is not a 3D shape");
 	} catch (e) {
@@ -796,7 +795,7 @@ function chamfer(shape, edges, distance) {
 			filteredEdges = [...selectedEdges];
 			kernelDistance = distance;
 		}
-		const inputFaceHashes = require_shapeFns.collectInputFaceHashes([shape]);
+		const inputFaceHashes = require_solidBuilders.collectInputFaceHashes([shape]);
 		const { shape: resultShape, evolution } = require_shapeTypes.getKernel().chamferWithHistory(shape.wrapped, filteredEdges.map((e) => e.wrapped), kernelDistance, inputFaceHashes, require_constants.HASH_CODE_MAX);
 		return finalizeShape3D(evolution, resultShape, [shape], require_errors.BrepErrorCode.CHAMFER_NOT_3D, "Chamfer result is not a 3D shape");
 	} catch (e) {
@@ -829,14 +828,14 @@ function shell(shape, faces, thickness, tolerance = .001, { trackEvolution = tru
 			}
 			return require_errors.ok(cast);
 		}
-		const inputFaceHashes = require_shapeFns.collectInputFaceHashes([shape]);
+		const inputFaceHashes = require_solidBuilders.collectInputFaceHashes([shape]);
 		const { shape: resultShape, evolution } = require_shapeTypes.getKernel().shellWithHistory(shape.wrapped, faces.map((f) => f.wrapped), thickness, inputFaceHashes, require_constants.HASH_CODE_MAX, tolerance);
 		const cast = require_shapeTypes.castResultShape(resultShape);
 		if (!require_shapeTypes.isShape3D(cast)) {
 			require_shapeTypes.disposeResultShape(cast);
 			return require_errors.err(require_errors.kernelError("SHELL_RESULT_NOT_3D", "Shell result is not a 3D shape"));
 		}
-		require_shapeFns.propagateAllMetadata(evolution, [shape], cast);
+		require_solidBuilders.propagateAllMetadata(evolution, [shape], cast);
 		return require_errors.ok(cast);
 	} catch (e) {
 		return require_errors.err(require_errors.kernelError("SHELL_FAILED", `Shell operation failed: ${e instanceof Error ? e.message : String(e)}`, e, {
@@ -858,14 +857,14 @@ function offset(shape, distance, tolerance = 1e-6) {
 	if (require_errors.isErr(check)) return check;
 	if (Math.abs(distance) < 1e-10) return require_errors.err(require_errors.validationError("ZERO_OFFSET", "Offset distance cannot be zero"));
 	try {
-		const inputFaceHashes = require_shapeFns.collectInputFaceHashes([shape]);
+		const inputFaceHashes = require_solidBuilders.collectInputFaceHashes([shape]);
 		const { shape: resultShape, evolution } = require_shapeTypes.getKernel().offsetWithHistory(shape.wrapped, distance, inputFaceHashes, require_constants.HASH_CODE_MAX, tolerance);
 		const cast = require_shapeTypes.castResultShape(resultShape);
 		if (!require_shapeTypes.isShape3D(cast)) {
 			require_shapeTypes.disposeResultShape(cast);
 			return require_errors.err(require_errors.kernelError("OFFSET_RESULT_NOT_3D", "Offset result is not a 3D shape"));
 		}
-		require_shapeFns.propagateAllMetadata(evolution, [shape], cast);
+		require_solidBuilders.propagateAllMetadata(evolution, [shape], cast);
 		return require_errors.ok(cast);
 	} catch (e) {
 		return require_errors.err(require_errors.kernelError("OFFSET_FAILED", `Offset operation failed: ${e instanceof Error ? e.message : String(e)}`, e));
@@ -903,7 +902,7 @@ function draft(shape, faces, pullDirection, neutralPlane, angle) {
 	try {
 		const { filteredFaces, kernelAngle } = resolveDraftCallback(faces, angle);
 		if (filteredFaces.length === 0) return require_errors.err(require_errors.validationError(require_errors.BrepErrorCode.DRAFT_NO_FACES, "No faces with valid draft angle", void 0, void 0, "Check that the angle callback returns non-zero values between -90 and 90 degrees"));
-		const inputFaceHashes = require_shapeFns.collectInputFaceHashes([shape]);
+		const inputFaceHashes = require_solidBuilders.collectInputFaceHashes([shape]);
 		const { shape: resultShape, evolution } = require_shapeTypes.getKernel().draftWithHistory(shape.wrapped, filteredFaces.map((f) => f.wrapped), [
 			pullDirection[0],
 			pullDirection[1],

package/dist/{helpers-Cu4ag5bh.cjs → helpers-BfkBvokP.cjs}

@@ -1,13 +1,12 @@
-const require_shapeTypes = require("./shapeTypes-Bpsu5KJO.cjs");
-const require_bug = require("./bug-O02CsAmt.cjs");
-const require_errors = require("./errors-CJU8CHng.cjs");
-const require_topologyQueryFns = require("./topologyQueryFns-C3fhJndG.cjs");
+const require_shapeTypes = require("./shapeTypes-CkcIL7zv.cjs");
+const require_errors = require("./errors-RHkKO5bZ.cjs");
+const require_topologyQueryFns = require("./topologyQueryFns-Bia7o8l_.cjs");
 const require_constants = require("./constants-BOVyEYGH.cjs");
 const require_vecOps = require("./vecOps-CCnJt-yH.cjs");
-const require_faceFns = require("./faceFns-CPswi9Cm.cjs");
-const require_shapeFns = require("./shapeFns-qm9VRo4i.cjs");
-const require_curveFns = require("./curveFns-D7utcbnf.cjs");
-const require_measureFns = require("./measureFns-B5Zzg1qM.cjs");
+const require_faceFns = require("./faceFns-BK4r7Dxk.cjs");
+const require_shapeFns = require("./shapeFns-D_5TgiUi.cjs");
+const require_curveFns = require("./curveFns-GmFnqNo3.cjs");
+const require_measureFns = require("./measureFns-CJGrmhHT.cjs");
 //#region src/utils/vec2d.ts
 /** Precision for curve intersection and parameter operations. */
 var PRECISION_INTERSECTION = 1e-9;
@@ -74,7 +73,7 @@ var rotate2d = (point, angle, center = [0, 0]) => {
 * Normalize a 2D vector to unit length.
 * Returns `[0, 0]` for zero-length vectors (within epsilon).
 */
-function normalize2d$1([x, y]) {
+function normalize2d([x, y]) {
 	const l = Math.sqrt(x * x + y * y);
 	return l < 1e-12 ? [0, 0] : [x / l, y / l];
 }
@@ -91,21 +90,6 @@ var cartesianToPolar = ([x, y]) => {
 	return [Math.sqrt(x * x + y * y), Math.atan2(y, x)];
 };
 //#endregion
-//#region src/2d/lib/vectorOperations.ts
-/**
-* Normalize a 2D vector to unit length.
-*
-* Unlike the Layer 0 version (which returns [0,0] for zero-length vectors),
-* this throws a BrepBugError — Layer 2 code should never pass zero-length vectors.
-*
-* @throws When the vector has near-zero length.
-*/
-var normalize2d = ([x, y]) => {
-	const result = normalize2d$1([x, y]);
-	if (result[0] === 0 && result[1] === 0) require_bug.bug("normalize2d", "Cannot normalize zero-length vector");
-	return result;
-};
-//#endregion
 //#region src/query/finderCore.ts
 /**
 * Find exactly one element matching all predicates. Returns an error Result

package/dist/{helpers-BiN4qQZP.js → helpers-Du_OdHuy.js}

@@ -1,13 +1,12 @@
-import { it as getKernel, y as isFace } from "./shapeTypes-CnKFSfDT.js";
-import { n as bug } from "./bug-BdOHwn_e.js";
-import { C as isOk, O as ok, o as queryError, v as err } from "./errors-B3CDG537.js";
-import { c as getFaces, f as getVertices, p as getWires, s as getEdges } from "./topologyQueryFns-DNqT88yx.js";
+import { K as getKernel, y as isFace } from "./shapeTypes-t49f64Dx.js";
+import { E as ok, g as err, o as queryError, x as isOk } from "./errors-MHLiNE-C.js";
+import { c as getFaces, f as getVertices, p as getWires, s as getEdges } from "./topologyQueryFns-BkQ6Q7gN.js";
 import { t as DEG2RAD } from "./constants-ITRzCnCp.js";
 import { a as vecDot, d as vecNormalize } from "./vecOps-SKPRvPH-.js";
-import { l as normalAt, s as getSurfaceType } from "./faceFns-CB6uzvOg.js";
-import { a as isSameShape, n as getHashCode } from "./shapeFns-BrHFNLMA.js";
-import { f as getCurveType, i as curveIsClosed, o as curveLength } from "./curveFns-RENXKp64.js";
-import { n as measureArea } from "./measureFns-CC7HhAH3.js";
+import { l as normalAt, s as getSurfaceType } from "./faceFns-DJj9Nb6T.js";
+import { a as isSameShape, n as getHashCode } from "./shapeFns-BTFx-os7.js";
+import { f as getCurveType, i as curveIsClosed, o as curveLength } from "./curveFns-DX13KRh2.js";
+import { n as measureArea } from "./measureFns-CMnbcUZC.js";
 //#region src/utils/vec2d.ts
 /** Precision for curve intersection and parameter operations. */
 var PRECISION_INTERSECTION = 1e-9;
@@ -74,7 +73,7 @@ var rotate2d = (point, angle, center = [0, 0]) => {
 * Normalize a 2D vector to unit length.
 * Returns `[0, 0]` for zero-length vectors (within epsilon).
 */
-function normalize2d$1([x, y]) {
+function normalize2d([x, y]) {
 	const l = Math.sqrt(x * x + y * y);
 	return l < 1e-12 ? [0, 0] : [x / l, y / l];
 }
@@ -91,21 +90,6 @@ var cartesianToPolar = ([x, y]) => {
 	return [Math.sqrt(x * x + y * y), Math.atan2(y, x)];
 };
 //#endregion
-//#region src/2d/lib/vectorOperations.ts
-/**
-* Normalize a 2D vector to unit length.
-*
-* Unlike the Layer 0 version (which returns [0,0] for zero-length vectors),
-* this throws a BrepBugError — Layer 2 code should never pass zero-length vectors.
-*
-* @throws When the vector has near-zero length.
-*/
-var normalize2d = ([x, y]) => {
-	const result = normalize2d$1([x, y]);
-	if (result[0] === 0 && result[1] === 0) bug("normalize2d", "Cannot normalize zero-length vector");
-	return result;
-};
-//#endregion
 //#region src/query/finderCore.ts
 /**
 * Find exactly one element matching all predicates. Returns an error Result
@@ -324,4 +308,4 @@ function getSingleFace(f, shape) {
 	return f(faceFinder()).findUnique(shape);
 }
 //#endregion
-export { samePoint as _, createTypedFinder as a, subtract2d as b, PRECISION_OFFSET as c, cartesianToPolar as d, crossProduct2d as f, rotate2d as g, polarToCartesian as h, wireFinder as i, add2d as l, polarAngle2d as m, edgeFinder as n, normalize2d as o, distance2d as p, faceFinder as r, PRECISION_INTERSECTION as s, getSingleFace as t, angle2d as u, scalarMultiply2d as v, squareDistance2d as y };
+export { samePoint as _, createTypedFinder as a, subtract2d as b, add2d as c, crossProduct2d as d, distance2d as f, rotate2d as g, polarToCartesian as h, wireFinder as i, angle2d as l, polarAngle2d as m, edgeFinder as n, PRECISION_INTERSECTION as o, normalize2d as p, faceFinder as r, PRECISION_OFFSET as s, getSingleFace as t, cartesianToPolar as u, scalarMultiply2d as v, squareDistance2d as y };

package/dist/{importFns-X8vBhZI2.js → importFns-DqxAZFb-.js}

@@ -1,8 +1,8 @@
-import { it as getKernel, n as castResultShape } from "./shapeTypes-CnKFSfDT.js";
+import { K as getKernel, n as castResultShape } from "./shapeTypes-t49f64Dx.js";
 import { i as wasmIndex, r as vec3At$1 } from "./bug-BdOHwn_e.js";
-import { O as ok, r as ioError, t as BrepErrorCode, v as err } from "./errors-B3CDG537.js";
+import { E as ok, g as err, r as ioError, t as BrepErrorCode } from "./errors-MHLiNE-C.js";
 import { n as getAtOrThrow } from "./arrayAccess-DrUGPADn.js";
-import { f as make2dSegmentCurve, m as make2dThreePointArc, s as make2dBezierCurve, t as Blueprint } from "./blueprint-DJJo8WkI.js";
+import { f as make2dSegmentCurve, m as make2dThreePointArc, s as make2dBezierCurve, t as Blueprint } from "./blueprint-DEMSX-hc.js";
 //#region src/io/objExportFns.ts
 /** Read a vec3 from a typed array at the given vertex index. */
 function vec3At(arr, i) {

package/dist/{importFns-DS4J1xLv.cjs → importFns-pr-r5qiV.cjs}

@@ -1,8 +1,8 @@
-const require_shapeTypes = require("./shapeTypes-Bpsu5KJO.cjs");
+const require_shapeTypes = require("./shapeTypes-CkcIL7zv.cjs");
 const require_bug = require("./bug-O02CsAmt.cjs");
-const require_errors = require("./errors-CJU8CHng.cjs");
+const require_errors = require("./errors-RHkKO5bZ.cjs");
 const require_arrayAccess = require("./arrayAccess-e4H9cBfh.cjs");
-const require_blueprint = require("./blueprint-DTNT4qYJ.cjs");
+const require_blueprint = require("./blueprint-DUnNPwQL.cjs");
 //#region src/io/objExportFns.ts
 /** Read a vec3 from a typed array at the given vertex index. */
 function vec3At(arr, i) {

package/dist/io.cjs

@@ -1,6 +1,6 @@
 Object.defineProperty(exports, Symbol.toStringTag, { value: "Module" });
-const require_meshFns = require("./meshFns-CaXmWmhe.cjs");
-const require_importFns = require("./importFns-DS4J1xLv.cjs");
+const require_meshFns = require("./meshFns-Dqf5QBhQ.cjs");
+const require_importFns = require("./importFns-pr-r5qiV.cjs");
 exports.blueprintToDXF = require_importFns.blueprintToDXF;
 exports.exportDXF = require_importFns.exportDXF;
 exports.exportGlb = require_importFns.exportGlb;

package/dist/io.js

@@ -1,3 +1,3 @@
-import { n as exportSTEP, r as exportSTL, t as exportIGES } from "./meshFns-D57Fyqyf.js";
-import { a as importSVG, c as blueprintToDXF, d as exportGltf, f as exportOBJ, i as exportSTEPConfigured, l as exportDXF, n as importSTEP, o as importSVGPathD, r as importSTL, s as exportThreeMF, t as importIGES, u as exportGlb } from "./importFns-X8vBhZI2.js";
+import { n as exportSTEP, r as exportSTL, t as exportIGES } from "./meshFns-Cs5EBsf7.js";
+import { a as importSVG, c as blueprintToDXF, d as exportGltf, f as exportOBJ, i as exportSTEPConfigured, l as exportDXF, n as importSTEP, o as importSVGPathD, r as importSTL, s as exportThreeMF, t as importIGES, u as exportGlb } from "./importFns-DqxAZFb-.js";
 export { blueprintToDXF, exportDXF, exportGlb, exportGltf, exportIGES, exportOBJ, exportSTEP, exportSTEPConfigured, exportSTL, exportThreeMF, importIGES, importSTEP, importSTL, importSVG, importSVGPathD };