brepjs 18.118.30 → 18.118.31

package/dist/brepjs.cjs

@@ -1,5 +1,5 @@
 Object.defineProperty(exports, Symbol.toStringTag, { value: "Module" });
-const require_textBlueprints = require("./textBlueprints-DKC3VIj5.cjs");
+const require_textBlueprints = require("./textBlueprints-BqjL78Py.cjs");
 const require_shapeTypes = require("./shapeTypes-CSWNkVze.cjs");
 const require_occtWasmAdapter = require("./occtWasmAdapter-emUI0yql.cjs");
 const require_bug = require("./bug-O02CsAmt.cjs");
@@ -15,12 +15,12 @@ const require_curveFns = require("./curveFns-fJO3d-Hx.cjs");
 const require_meshFns = require("./meshFns-BlgjXe87.cjs");
 const require_arrayAccess = require("./arrayAccess-e4H9cBfh.cjs");
 const require_surfaceBuilders = require("./surfaceBuilders-BmjMJAAq.cjs");
-const require_solidBuilders = require("./solidBuilders-BJ94_pNp.cjs");
-const require_healingFns = require("./healingFns-CRPfNXM_.cjs");
-const require_threadFns = require("./threadFns-DX3YsQaj.cjs");
+const require_solidBuilders = require("./solidBuilders-BcEHc4TA.cjs");
+const require_healingFns = require("./healingFns-Cu73AuMH.cjs");
+const require_threadFns = require("./threadFns-DVs1fpAF.cjs");
 const require_blueprintSketcher = require("./blueprintSketcher-C45gRDpF.cjs");
 const require_helpers = require("./helpers-CDR7Sp-u.cjs");
-const require_drawFns = require("./drawFns-uewgB6Rf.cjs");
+const require_drawFns = require("./drawFns-w4J5GGwf.cjs");
 const require_measureFns = require("./measureFns-CbJmQhR2.cjs");
 const require_cornerFinder = require("./cornerFinder-BZgMivAV.cjs");
 const require_boolean2D = require("./boolean2D-hs8bIs8J.cjs");
@@ -28,11 +28,11 @@ const require_blueprintFns = require("./blueprintFns-Co0S0Nor.cjs");
 const require_importFns = require("./importFns-e-oPPBZD.cjs");
 const require_loftFns = require("./loftFns-ETbdS4A5.cjs");
 const require_cameraFns = require("./cameraFns-J7qTT3Yh.cjs");
-const require_textMetrics = require("./textMetrics-CFWUMBxB.cjs");
+const require_textMetrics = require("./textMetrics-CWBieBcs.cjs");
 const require_adjacencyFns = require("./adjacencyFns-BSvV5KIo.cjs");
 const require_refResolveFns = require("./refResolveFns-Czi9RcEf.cjs");
 const require_workerPool = require("./workerPool-D30NsiIW.cjs");
-const require_primitiveFns = require("./primitiveFns-Bh9mWBfs.cjs");
+const require_primitiveFns = require("./primitiveFns-zva1hjBx.cjs");
 //#region src/topology/shapeBooleans.ts
 var BOPAlgo_GlueShift = 1;
 var BOPAlgo_GlueFull = 2;

package/dist/brepjs.js

@@ -13,25 +13,25 @@ import { a as curveIsPeriodic, c as curvePointAt, d as flipOrientation, f as get
 import { a as meshEdges$1, c as meshMultiLOD, d as createMeshCache, i as mesh$1, l as buildMeshCacheKey, n as exportSTEP, o as meshLODs, r as exportSTL, s as meshLODsProgressive, t as exportIGES, u as clearMeshCache } from "./meshFns-BFjeEjYP.js";
 import { n as getAtOrThrow, r as lastOrThrow, t as firstOrThrow } from "./arrayAccess-DrUGPADn.js";
 import { _ as makeThreePointArc, d as makeCircle, h as makeLine, l as makeBSplineInterpolation, n as fill, r as makeFace, s as assembleWire } from "./surfaceBuilders-9qZyEfFZ.js";
-import { _ as section$1, b as split$1, d as booleanPipeline, f as cut$2, g as intersect$2, h as fuseAll$2, m as fuse$2, p as cutAll$2, r as makeCylinder, t as makeCompound, v as sectionToFace$1, y as slice$1 } from "./solidBuilders-D3LMIcIz.js";
-import { A as toBufferGeometryData, C as shellWithEvolution, D as getNurbsCurveData, E as fuseAllBisect, M as toLODGeometryData, N as toLODGeometryLevels, O as getNurbsSurfaceData, P as toLineGeometryData, S as intersectWithEvolution, T as cutAllBisect, _ as positionOnCurve, a as healFace, b as filletWithEvolution, c as isValid$1, d as draft$1, f as fillet$1, g as variableFillet, h as thicken$1, i as heal$1, j as toGroupedBufferGeometryData, k as chamferDistAngle, l as solidFromShell, m as shell$1, n as fixSelfIntersection, o as healSolid, p as offset$1, r as fixShape, s as healWire, t as autoHeal, u as chamfer$1, v as chamferWithEvolution, w as checkBoolean, x as fuseWithEvolution, y as cutWithEvolution } from "./healingFns-DWeLpQd1.js";
-import { A as setJointValue, B as createAssemblyNode, C as cylindricalJoint, D as planarJoint, E as mechanismDOF, F as quatMultiply, G as circularPattern, H as removeChild, I as quatRotate, J as exportAssemblySTEP, K as gridPattern, L as addChild, M as sphericalJoint, N as quatFromAxisAngle, O as prismaticJoint, P as quatFromTo, R as collectShapes, S as addJoint, T as jointTransform, U as updateNode, V as findNode, W as walkAssembly, Y as createAssembly, _ as exportURDF, a as deserializeHistory, b as inverseKinematics, c as modifyStep, d as replayFrom, f as replayHistory, g as undoLast, h as stepsFrom, i as createRegistry, j as setJointValues, k as revoluteJoint, l as registerOperation, m as stepCount, n as addStep, o as findStep, p as serializeHistory, q as linearPattern, r as createHistory, s as getShape, t as thread, u as registerShape, v as importURDF, w as forwardKinematics, x as jointTrajectory, y as jointsFromDH, z as countNodes } from "./threadFns-CGBSDiMt.js";
+import { _ as section$1, b as split$1, d as booleanPipeline, f as cut$2, g as intersect$2, h as fuseAll$2, m as fuse$2, p as cutAll$2, r as makeCylinder, t as makeCompound, v as sectionToFace$1, y as slice$1 } from "./solidBuilders-DOo2osOC.js";
+import { A as toBufferGeometryData, C as shellWithEvolution, D as getNurbsCurveData, E as fuseAllBisect, M as toLODGeometryData, N as toLODGeometryLevels, O as getNurbsSurfaceData, P as toLineGeometryData, S as intersectWithEvolution, T as cutAllBisect, _ as positionOnCurve, a as healFace, b as filletWithEvolution, c as isValid$1, d as draft$1, f as fillet$1, g as variableFillet, h as thicken$1, i as heal$1, j as toGroupedBufferGeometryData, k as chamferDistAngle, l as solidFromShell, m as shell$1, n as fixSelfIntersection, o as healSolid, p as offset$1, r as fixShape, s as healWire, t as autoHeal, u as chamfer$1, v as chamferWithEvolution, w as checkBoolean, x as fuseWithEvolution, y as cutWithEvolution } from "./healingFns-EoIgTx_x.js";
+import { A as setJointValue, B as createAssemblyNode, C as cylindricalJoint, D as planarJoint, E as mechanismDOF, F as quatMultiply, G as circularPattern, H as removeChild, I as quatRotate, J as exportAssemblySTEP, K as gridPattern, L as addChild, M as sphericalJoint, N as quatFromAxisAngle, O as prismaticJoint, P as quatFromTo, R as collectShapes, S as addJoint, T as jointTransform, U as updateNode, V as findNode, W as walkAssembly, Y as createAssembly, _ as exportURDF, a as deserializeHistory, b as inverseKinematics, c as modifyStep, d as replayFrom, f as replayHistory, g as undoLast, h as stepsFrom, i as createRegistry, j as setJointValues, k as revoluteJoint, l as registerOperation, m as stepCount, n as addStep, o as findStep, p as serializeHistory, q as linearPattern, r as createHistory, s as getShape, t as thread, u as registerShape, v as importURDF, w as forwardKinematics, x as jointTrajectory, y as jointsFromDH, z as countNodes } from "./threadFns-aj-opG6P.js";
 import { n as BaseSketcher2d, r as organiseBlueprints, t as BlueprintSketcher } from "./blueprintSketcher-B9HRVab_.js";
 import { a as createTypedFinder, i as wireFinder, n as edgeFinder, r as faceFinder, t as getSingleFace } from "./helpers-iqCaToj9.js";
-import { A as sketchEllipse, D as makeBaseBox, E as deserializeDrawing, F as sketchRectangle, I as sketchRoundedRectangle, L as FaceSketcher, M as sketchHelix, N as sketchParametricFunction, O as polysideInnerRadius, P as sketchPolysides, R as Sketcher, S as drawText, _ as drawPolysides, a as drawingIntersect, b as drawSingleCircle, c as rotateDrawing, d as drawFaceOutline, f as drawProjection, g as drawPointsInterpolation, h as drawParametricFunction, i as drawingFuse, j as sketchFaceOffset, k as sketchCircle, l as scaleDrawing, m as drawEllipse, n as drawingCut, o as drawingToSketchOnPlane, p as drawCircle, r as drawingFillet, s as mirrorDrawing, t as drawingChamfer, u as translateDrawing, v as drawRectangle, w as draw, x as drawSingleEllipse, y as drawRoundedRectangle } from "./drawFns-CM6UoydM.js";
+import { A as sketchEllipse, D as makeBaseBox, E as deserializeDrawing, F as sketchRectangle, I as sketchRoundedRectangle, L as FaceSketcher, M as sketchHelix, N as sketchParametricFunction, O as polysideInnerRadius, P as sketchPolysides, R as Sketcher, S as drawText, _ as drawPolysides, a as drawingIntersect, b as drawSingleCircle, c as rotateDrawing, d as drawFaceOutline, f as drawProjection, g as drawPointsInterpolation, h as drawParametricFunction, i as drawingFuse, j as sketchFaceOffset, k as sketchCircle, l as scaleDrawing, m as drawEllipse, n as drawingCut, o as drawingToSketchOnPlane, p as drawCircle, r as drawingFillet, s as mirrorDrawing, t as drawingChamfer, u as translateDrawing, v as drawRectangle, w as draw, x as drawSingleEllipse, y as drawRoundedRectangle } from "./drawFns-BfnsQHTt.js";
 import { a as measureDistance, c as measureLinearProps, d as measureVolumeProps, i as measureCurvatureAtMid, l as measureSurfaceProps, n as measureArea, o as measureDistanceProps, r as measureCurvatureAt, s as measureLength, t as createDistanceQuery, u as measureVolume } from "./measureFns-B9PVxroM.js";
 import { t as cornerFinder } from "./cornerFinder-D_U4i1mP.js";
 import { a as fuseBlueprints, c as roundedRectangleBlueprint, i as cutBlueprints, n as fuse2D, o as intersectBlueprints, r as intersect2D, s as polysidesBlueprint, t as cut2D } from "./boolean2D-1oV4XUXs.js";
 import { S as reverseCurve, _ as curve2dIsOnCurve, a as isInside2D, b as curve2dSplitAt, c as scale2D, d as stretch2D, f as toSVGPathD, g as curve2dFirstPoint, h as curve2dDistanceFrom, i as getOrientation2D, l as sketchOnFace2D, m as curve2dBoundingBox, n as createCompoundBlueprint, o as mirror2D, p as translate2D, r as getBounds2D, s as rotate2D, t as createBlueprint, u as sketchOnPlane2D, v as curve2dLastPoint, x as curve2dTangentAt, y as curve2dParameter } from "./blueprintFns-BtsYL5sX.js";
 import { a as importSVG, c as blueprintToDXF, d as exportGltf, f as exportOBJ, i as exportSTEPConfigured, l as exportDXF, n as importSTEP, o as importSVGPathD, r as importSTL, s as exportThreeMF, t as importIGES, u as exportGlb } from "./importFns-BdUizsYV.js";
 import { a as revolve$1, c as multiSectionSweep, d as twistExtrude, i as extrudeAll, l as supportExtrude, n as loftAll, o as complexExtrude, r as extrude$1, s as guidedSweep, t as loft$1, u as sweep$1 } from "./loftFns-DyH-4tYU.js";
-import { a as Sketch, c as compoundSketchLoft, d as sketchFace, f as sketchLoft, h as sketchWires, i as Sketches, l as compoundSketchRevolve, m as sketchSweep, n as getFont, o as compoundSketchExtrude, p as sketchRevolve, r as loadFont, s as compoundSketchFace, t as textBlueprints, u as sketchExtrude, v as CompoundSketch } from "./textBlueprints-DBTQllob.js";
+import { a as Sketch, c as compoundSketchLoft, d as sketchFace, f as sketchLoft, h as sketchWires, i as Sketches, l as compoundSketchRevolve, m as sketchSweep, n as getFont, o as compoundSketchExtrude, p as sketchRevolve, r as loadFont, s as compoundSketchFace, t as textBlueprints, u as sketchExtrude, v as CompoundSketch } from "./textBlueprints-CSCa8xco.js";
 import { a as makeProjectedEdges, i as projectEdges, n as cameraLookAt, r as createCamera, s as isProjectionPlane, t as cameraFromPlane } from "./cameraFns-BPte0PuT.js";
-import { n as textMetrics, r as sketchText, t as fontMetrics } from "./textMetrics-DpQdJjRp.js";
+import { n as textMetrics, r as sketchText, t as fontMetrics } from "./textMetrics-BMFYJrbQ.js";
 import { a as facesOfVertex, c as verticesOfFace, i as facesOfEdge, l as wiresOfFace, n as adjacentFaces, o as sharedEdges, r as edgesOfFace, s as verticesOfEdge } from "./adjacencyFns-CmeUDX9T.js";
 import { _ as createRef, a as isVertexRef, b as defaultScorer, c as resolveRefParams, d as createVertexRef, f as resolveVertexRef, g as captureHint, h as assignRoles, i as isLineageRef, l as createDerivedFaceRef, m as resolveEdgeRef, n as isEdgeRef, o as resolveLineageRef, p as createEdgeRef, r as isFaceRef, s as resolveRefIn, t as isDerivedFaceRef, u as resolveDerivedFaceRef, v as resolveRef, y as updateRoles } from "./refResolveFns-sh-VUGiS.js";
 import { _ as isSuccessResponse, a as createWorkerClient, c as enqueueTask, d as rejectAll, f as isBatchRequest, g as isOperationRequest, h as isInitRequest, i as registerHandler, l as isEmpty$1, m as isErrorResponse, n as createOperationRegistry, o as createTaskQueue, p as isDisposeRequest, r as createWorkerHandler, s as dequeueTask, t as createWorkerPool, u as pendingCount } from "./workerPool-XcYX2UZ0.js";
-import { C as threePointArc, D as wireLoop, E as wire, S as tangentArc, T as vertex, _ as polygon, a as circle, b as sphere$1, c as cylinder, d as ellipsoid, f as face, g as offsetFace, h as line, i as bsplineApprox, l as ellipse, m as helix, n as bezier, o as compound, p as filledFace, r as box, s as cone, t as addHoles, u as ellipseArc, v as sewShells, w as torus$1, x as subFace, y as solid } from "./primitiveFns-BELDRuar.js";
+import { C as threePointArc, D as wireLoop, E as wire, S as tangentArc, T as vertex, _ as polygon, a as circle, b as sphere$1, c as cylinder, d as ellipsoid, f as face, g as offsetFace, h as line, i as bsplineApprox, l as ellipse, m as helix, n as bezier, o as compound, p as filledFace, r as box, s as cone, t as addHoles, u as ellipseArc, v as sewShells, w as torus$1, x as subFace, y as solid } from "./primitiveFns-DwxLmGng.js";
 //#region \0rolldown/runtime.js
 var __defProp = Object.defineProperty;
 var __exportAll = (all, no_symbols) => {

package/dist/{drawFns-CM6UoydM.js → drawFns-BfnsQHTt.js}

@@ -15,7 +15,7 @@ import { _ as samePoint$1, b as subtract2d, c as PRECISION_OFFSET, l as add2d, y
 import { _ as Curve2D, a as edgeToCurve, c as make2dCircle, d as make2dInerpolatedBSplineCurve, f as make2dSegmentCurve, g as approximateAsSvgCompatibleCurve, i as curvesAsEdgesOnPlane, l as make2dEllipse, o as make2dArcFromCenter, t as Blueprint, v as deserializeCurve2D, y as BoundingBox2d } from "./blueprint-Dt30dLQO.js";
 import { t as cornerFinder } from "./cornerFinder-D_U4i1mP.js";
 import { c as roundedRectangleBlueprint, n as fuse2D, r as intersect2D, s as polysidesBlueprint, t as cut2D } from "./boolean2D-1oV4XUXs.js";
-import { _ as wrapSketchDataArray, a as Sketch, g as wrapSketchData, i as Sketches, t as textBlueprints } from "./textBlueprints-DBTQllob.js";
+import { _ as wrapSketchDataArray, a as Sketch, g as wrapSketchData, i as Sketches, t as textBlueprints } from "./textBlueprints-CSCa8xco.js";
 import { i as projectEdges, t as cameraFromPlane } from "./cameraFns-BPte0PuT.js";
 //#region src/2d/lib/stitching.ts
 /**

package/dist/{drawFns-uewgB6Rf.cjs → drawFns-w4J5GGwf.cjs}

@@ -1,4 +1,4 @@
-const require_textBlueprints = require("./textBlueprints-DKC3VIj5.cjs");
+const require_textBlueprints = require("./textBlueprints-BqjL78Py.cjs");
 const require_shapeTypes = require("./shapeTypes-CSWNkVze.cjs");
 const require_bug = require("./bug-O02CsAmt.cjs");
 const require_errors = require("./errors-CJU8CHng.cjs");

package/dist/{healingFns-CRPfNXM_.cjs → healingFns-Cu73AuMH.cjs}

@@ -5,7 +5,7 @@ const require_constants = require("./constants-BOVyEYGH.cjs");
 const require_faceFns = require("./faceFns-C54Zlz7L.cjs");
 const require_shapeFns = require("./shapeFns-BRTngdGI.cjs");
 const require_arrayAccess = require("./arrayAccess-e4H9cBfh.cjs");
-const require_solidBuilders = require("./solidBuilders-BJ94_pNp.cjs");
+const require_solidBuilders = require("./solidBuilders-BcEHc4TA.cjs");
 //#region src/topology/threeHelpers.ts
 /**
 * Convert a ShapeMesh into BufferGeometry-compatible typed arrays.

package/dist/{healingFns-DWeLpQd1.js → healingFns-EoIgTx_x.js}

@@ -5,7 +5,7 @@ import { n as HASH_CODE_MAX } from "./constants-ITRzCnCp.js";
 import { y as downcast } from "./faceFns-dy60vOjq.js";
 import { _ as collectInputFaceHashes, y as propagateAllMetadata } from "./shapeFns-W7yEWaBx.js";
 import { t as firstOrThrow } from "./arrayAccess-DrUGPADn.js";
-import { f as cut, h as fuseAll, m as fuse, p as cutAll } from "./solidBuilders-D3LMIcIz.js";
+import { f as cut, h as fuseAll, m as fuse, p as cutAll } from "./solidBuilders-DOo2osOC.js";
 //#region src/topology/threeHelpers.ts
 /**
 * Convert a ShapeMesh into BufferGeometry-compatible typed arrays.

package/dist/operations.cjs

@@ -1,5 +1,5 @@
 Object.defineProperty(exports, Symbol.toStringTag, { value: "Module" });
-const require_threadFns = require("./threadFns-DX3YsQaj.cjs");
+const require_threadFns = require("./threadFns-DVs1fpAF.cjs");
 const require_loftFns = require("./loftFns-ETbdS4A5.cjs");
 exports.addChild = require_threadFns.addChild;
 exports.addJoint = require_threadFns.addJoint;

package/dist/operations.js

@@ -1,3 +1,3 @@
-import { A as setJointValue, B as createAssemblyNode, C as cylindricalJoint, D as planarJoint, E as mechanismDOF, G as circularPattern, H as removeChild, J as exportAssemblySTEP, K as gridPattern, L as addChild, M as sphericalJoint, O as prismaticJoint, R as collectShapes, S as addJoint, T as jointTransform, U as updateNode, V as findNode, W as walkAssembly, Y as createAssembly, _ as exportURDF, b as inverseKinematics, c as modifyStep, d as replayFrom, f as replayHistory, g as undoLast, h as stepsFrom, i as createRegistry, j as setJointValues, k as revoluteJoint, l as registerOperation, m as stepCount, n as addStep, o as findStep, q as linearPattern, r as createHistory, s as getShape, t as thread, u as registerShape, v as importURDF, w as forwardKinematics, x as jointTrajectory, y as jointsFromDH, z as countNodes } from "./threadFns-CGBSDiMt.js";
+import { A as setJointValue, B as createAssemblyNode, C as cylindricalJoint, D as planarJoint, E as mechanismDOF, G as circularPattern, H as removeChild, J as exportAssemblySTEP, K as gridPattern, L as addChild, M as sphericalJoint, O as prismaticJoint, R as collectShapes, S as addJoint, T as jointTransform, U as updateNode, V as findNode, W as walkAssembly, Y as createAssembly, _ as exportURDF, b as inverseKinematics, c as modifyStep, d as replayFrom, f as replayHistory, g as undoLast, h as stepsFrom, i as createRegistry, j as setJointValues, k as revoluteJoint, l as registerOperation, m as stepCount, n as addStep, o as findStep, q as linearPattern, r as createHistory, s as getShape, t as thread, u as registerShape, v as importURDF, w as forwardKinematics, x as jointTrajectory, y as jointsFromDH, z as countNodes } from "./threadFns-aj-opG6P.js";
 import { d as twistExtrude, l as supportExtrude, o as complexExtrude, u as sweep } from "./loftFns-DyH-4tYU.js";
 export { addChild, addJoint, addStep, circularPattern, collectShapes, complexExtrude, countNodes, createAssembly, createAssemblyNode, createHistory, createRegistry, cylindricalJoint, exportAssemblySTEP, exportURDF, findNode, findStep, forwardKinematics, getShape as getHistoryShape, gridPattern, importURDF, inverseKinematics, jointTrajectory, jointTransform, jointsFromDH, linearPattern, mechanismDOF, modifyStep, planarJoint, prismaticJoint, registerOperation, registerShape, removeChild, replayFrom, replayHistory, revoluteJoint, setJointValue, setJointValues, sphericalJoint, stepCount, stepsFrom, supportExtrude, sweep, thread, twistExtrude, undoLast, updateNode, walkAssembly };

package/dist/{primitiveFns-BELDRuar.js → primitiveFns-DwxLmGng.js}

@@ -3,7 +3,7 @@ import { O as ok, d as validationError, g as andThen, v as err } from "./errors-
 import { t as DEG2RAD } from "./constants-ITRzCnCp.js";
 import { g as translate } from "./shapeFns-W7yEWaBx.js";
 import { _ as makeThreePointArc, a as makeNonPlanarFace, c as makeBSplineApproximation, d as makeCircle, f as makeEllipse, g as makeTangentArc, h as makeLine, i as makeNewFaceWithinFace, m as makeHelix, o as makePolygon, p as makeEllipseArc, r as makeFace, s as assembleWire, t as addHolesInFace, u as makeBezierCurve } from "./surfaceBuilders-9qZyEfFZ.js";
-import { a as makeOffset, c as makeTorus, i as makeEllipsoid, l as makeVertex, n as makeCone, o as makeSolid, r as makeCylinder, s as makeSphere, t as makeCompound, u as weldShellsAndFaces } from "./solidBuilders-D3LMIcIz.js";
+import { a as makeOffset, c as makeTorus, i as makeEllipsoid, l as makeVertex, n as makeCone, o as makeSolid, r as makeCylinder, s as makeSphere, t as makeCompound, u as weldShellsAndFaces } from "./solidBuilders-DOo2osOC.js";
 //#region src/topology/primitiveFns.ts
 /**
 * Create a box with the given dimensions.

package/dist/{primitiveFns-Bh9mWBfs.cjs → primitiveFns-zva1hjBx.cjs}

@@ -3,7 +3,7 @@ const require_errors = require("./errors-CJU8CHng.cjs");
 const require_constants = require("./constants-BOVyEYGH.cjs");
 const require_shapeFns = require("./shapeFns-BRTngdGI.cjs");
 const require_surfaceBuilders = require("./surfaceBuilders-BmjMJAAq.cjs");
-const require_solidBuilders = require("./solidBuilders-BJ94_pNp.cjs");
+const require_solidBuilders = require("./solidBuilders-BcEHc4TA.cjs");
 //#region src/topology/primitiveFns.ts
 /**
 * Create a box with the given dimensions.

package/dist/sketching.cjs

@@ -1,7 +1,7 @@
 Object.defineProperty(exports, Symbol.toStringTag, { value: "Module" });
-const require_textBlueprints = require("./textBlueprints-DKC3VIj5.cjs");
+const require_textBlueprints = require("./textBlueprints-BqjL78Py.cjs");
 const require_blueprintSketcher = require("./blueprintSketcher-C45gRDpF.cjs");
-const require_drawFns = require("./drawFns-uewgB6Rf.cjs");
+const require_drawFns = require("./drawFns-w4J5GGwf.cjs");
 //#region src/sketching.ts
 /**
 * brepjs/sketching — Sketcher, Drawing, and sketch-to-shape operations.

package/dist/sketching.js

@@ -1,6 +1,6 @@
 import { n as BaseSketcher2d, t as BlueprintSketcher } from "./blueprintSketcher-B9HRVab_.js";
-import { A as sketchEllipse, C as DrawingPen, D as makeBaseBox, E as deserializeDrawing, F as sketchRectangle, I as sketchRoundedRectangle, L as FaceSketcher, M as sketchHelix, N as sketchParametricFunction, O as polysideInnerRadius, P as sketchPolysides, R as Sketcher, S as drawText, T as Drawing, _ as drawPolysides, a as drawingIntersect, b as drawSingleCircle, c as rotateDrawing, d as drawFaceOutline, f as drawProjection, g as drawPointsInterpolation, h as drawParametricFunction, i as drawingFuse, j as sketchFaceOffset, k as sketchCircle, l as scaleDrawing, m as drawEllipse, n as drawingCut, o as drawingToSketchOnPlane, p as drawCircle, r as drawingFillet, s as mirrorDrawing, t as drawingChamfer, u as translateDrawing, v as drawRectangle, w as draw, x as drawSingleEllipse, y as drawRoundedRectangle } from "./drawFns-CM6UoydM.js";
-import { a as Sketch, c as compoundSketchLoft, d as sketchFace, f as sketchLoft, h as sketchWires, i as Sketches, l as compoundSketchRevolve, m as sketchSweep, o as compoundSketchExtrude, p as sketchRevolve, s as compoundSketchFace, u as sketchExtrude, v as CompoundSketch } from "./textBlueprints-DBTQllob.js";
+import { A as sketchEllipse, C as DrawingPen, D as makeBaseBox, E as deserializeDrawing, F as sketchRectangle, I as sketchRoundedRectangle, L as FaceSketcher, M as sketchHelix, N as sketchParametricFunction, O as polysideInnerRadius, P as sketchPolysides, R as Sketcher, S as drawText, T as Drawing, _ as drawPolysides, a as drawingIntersect, b as drawSingleCircle, c as rotateDrawing, d as drawFaceOutline, f as drawProjection, g as drawPointsInterpolation, h as drawParametricFunction, i as drawingFuse, j as sketchFaceOffset, k as sketchCircle, l as scaleDrawing, m as drawEllipse, n as drawingCut, o as drawingToSketchOnPlane, p as drawCircle, r as drawingFillet, s as mirrorDrawing, t as drawingChamfer, u as translateDrawing, v as drawRectangle, w as draw, x as drawSingleEllipse, y as drawRoundedRectangle } from "./drawFns-BfnsQHTt.js";
+import { a as Sketch, c as compoundSketchLoft, d as sketchFace, f as sketchLoft, h as sketchWires, i as Sketches, l as compoundSketchRevolve, m as sketchSweep, o as compoundSketchExtrude, p as sketchRevolve, s as compoundSketchFace, u as sketchExtrude, v as CompoundSketch } from "./textBlueprints-CSCa8xco.js";
 //#region src/sketching.ts
 /**
 * brepjs/sketching — Sketcher, Drawing, and sketch-to-shape operations.

package/dist/{solidBuilders-BJ94_pNp.cjs → solidBuilders-BcEHc4TA.cjs}

@@ -219,16 +219,47 @@ function cutAll(base, tools, { optimisation = "none", simplify = false, signal,
 	return cutAllResult;
 }
 /**
+* Choose the section face's in-plane half-extent and centre so it covers the
+* whole shape. The rectangle is centred on the shape's bounding-box centre
+* projected onto the cutting plane (dropping the normal component keeps the cut
+* at the plane's position while covering an off-origin shape). The half-extent is
+* the bbox diagonal — large enough for any plane orientation — so a big or
+* off-origin shape is not silently clipped.
+*
+* When the caller passes an explicit `planeSize` they've taken manual control, so
+* the historical plane-origin centring is preserved (only the auto path re-centres
+* on the shape) to avoid silently changing behaviour for existing callers.
+*/
+function resolveSectionPlacement(shape, plane, planeSize) {
+	if (planeSize !== void 0) return {
+		size: planeSize,
+		center: plane.origin
+	};
+	const { min, max } = require_shapeTypes.getKernel().boundingBox(shape.wrapped);
+	const bboxCenter = [
+		(min[0] + max[0]) / 2,
+		(min[1] + max[1]) / 2,
+		(min[2] + max[2]) / 2
+	];
+	const normalOffset = require_vecOps.vecDot(require_vecOps.vecSub(bboxCenter, plane.origin), plane.zDir);
+	const center = require_vecOps.vecSub(bboxCenter, require_vecOps.vecScale(plane.zDir, normalOffset));
+	const diagonal = Math.hypot(max[0] - min[0], max[1] - min[1], max[2] - min[2]);
+	return {
+		size: Math.max(diagonal, 1),
+		center
+	};
+}
+/**
 * Build a large bounded planar face from a Plane definition.
-* The face extends +/-size along xDir and yDir from the origin.
+* The face extends +/-size along xDir and yDir from `center` (a point on the plane).
 */
-function makeSectionFace(plane, size) {
+function makeSectionFace(plane, size, center) {
 	const kernel = require_shapeTypes.getKernel();
 	const hx = require_vecOps.vecScale(plane.xDir, size);
 	const hy = require_vecOps.vecScale(plane.yDir, size);
 	const nhx = require_vecOps.vecScale(plane.xDir, -size);
 	const nhy = require_vecOps.vecScale(plane.yDir, -size);
-	const o = plane.origin;
+	const o = center;
 	const c0 = [...require_vecOps.vecAdd(require_vecOps.vecAdd(o, nhx), nhy)];
 	const c1 = [...require_vecOps.vecAdd(require_vecOps.vecAdd(o, hx), nhy)];
 	const c2 = [...require_vecOps.vecAdd(require_vecOps.vecAdd(o, hx), hy)];
@@ -252,12 +283,15 @@ function makeSectionFace(plane, size) {
 * @param shape The shape to section (typically a solid or shell)
 * @param plane Plane definition — a named plane ("XY", "XZ", etc.) or a Plane object
 * @param options.approximation Whether to approximate the section curves (default true)
-* @param options.planeSize Half-size of the cutting plane (default 1e4)
+* @param options.planeSize Half-size of the cutting plane. Defaults to the shape's
+*   bounding-box diagonal so large or off-origin shapes aren't clipped.
 * @returns The section result as a shape (typically containing wires/edges)
 */
-function section(shape, plane, { approximation = true, planeSize = 1e4 } = {}) {
+function section(shape, plane, { approximation = true, planeSize } = {}) {
 	if (require_shapeTypes.getKernel().isNull(shape.wrapped)) return require_errors.err(require_errors.validationError(require_errors.BrepErrorCode.NULL_SHAPE_INPUT, "section: shape is a null shape"));
-	const sectionFace = makeSectionFace(typeof plane === "string" ? require_errors.unwrap(require_planeOps.resolvePlane(plane)) : plane, planeSize);
+	const resolvedPlane = typeof plane === "string" ? require_errors.unwrap(require_planeOps.resolvePlane(plane)) : plane;
+	const { size, center } = resolveSectionPlacement(shape, resolvedPlane, planeSize);
+	const sectionFace = makeSectionFace(resolvedPlane, size, center);
 	try {
 		return require_errors.ok(require_shapeTypes.castResultShape(require_shapeTypes.getKernel().section(shape.wrapped, sectionFace, approximation)));
 	} catch (e) {

package/dist/{solidBuilders-D3LMIcIz.js → solidBuilders-DOo2osOC.js}

@@ -2,7 +2,7 @@ import { C as isSolid, R as getShapeKind, S as isShell, d as createSolid, f as c
 import { I as unwrap, O as ok, S as isErr, d as validationError, g as andThen, i as kernelError, l as typeCastError, t as BrepErrorCode, v as err } from "./errors-B3CDG537.js";
 import { f as getVertices, p as getWires, s as getEdges } from "./topologyQueryFns-WsDCzw30.js";
 import { n as HASH_CODE_MAX } from "./constants-ITRzCnCp.js";
-import { h as vecScale, t as vecAdd } from "./vecOps-SKPRvPH-.js";
+import { a as vecDot, g as vecSub, h as vecScale, t as vecAdd } from "./vecOps-SKPRvPH-.js";
 import { o as resolvePlane } from "./planeOps-Cp6GQ23-.js";
 import { _ as cast, y as downcast } from "./faceFns-dy60vOjq.js";
 import { _ as collectInputFaceHashes, b as propagateMetadataByHash, y as propagateAllMetadata } from "./shapeFns-W7yEWaBx.js";
@@ -219,16 +219,47 @@ function cutAll(base, tools, { optimisation = "none", simplify = false, signal,
 	return cutAllResult;
 }
 /**
+* Choose the section face's in-plane half-extent and centre so it covers the
+* whole shape. The rectangle is centred on the shape's bounding-box centre
+* projected onto the cutting plane (dropping the normal component keeps the cut
+* at the plane's position while covering an off-origin shape). The half-extent is
+* the bbox diagonal — large enough for any plane orientation — so a big or
+* off-origin shape is not silently clipped.
+*
+* When the caller passes an explicit `planeSize` they've taken manual control, so
+* the historical plane-origin centring is preserved (only the auto path re-centres
+* on the shape) to avoid silently changing behaviour for existing callers.
+*/
+function resolveSectionPlacement(shape, plane, planeSize) {
+	if (planeSize !== void 0) return {
+		size: planeSize,
+		center: plane.origin
+	};
+	const { min, max } = getKernel().boundingBox(shape.wrapped);
+	const bboxCenter = [
+		(min[0] + max[0]) / 2,
+		(min[1] + max[1]) / 2,
+		(min[2] + max[2]) / 2
+	];
+	const normalOffset = vecDot(vecSub(bboxCenter, plane.origin), plane.zDir);
+	const center = vecSub(bboxCenter, vecScale(plane.zDir, normalOffset));
+	const diagonal = Math.hypot(max[0] - min[0], max[1] - min[1], max[2] - min[2]);
+	return {
+		size: Math.max(diagonal, 1),
+		center
+	};
+}
+/**
 * Build a large bounded planar face from a Plane definition.
-* The face extends +/-size along xDir and yDir from the origin.
+* The face extends +/-size along xDir and yDir from `center` (a point on the plane).
 */
-function makeSectionFace(plane, size) {
+function makeSectionFace(plane, size, center) {
 	const kernel = getKernel();
 	const hx = vecScale(plane.xDir, size);
 	const hy = vecScale(plane.yDir, size);
 	const nhx = vecScale(plane.xDir, -size);
 	const nhy = vecScale(plane.yDir, -size);
-	const o = plane.origin;
+	const o = center;
 	const c0 = [...vecAdd(vecAdd(o, nhx), nhy)];
 	const c1 = [...vecAdd(vecAdd(o, hx), nhy)];
 	const c2 = [...vecAdd(vecAdd(o, hx), hy)];
@@ -252,12 +283,15 @@ function makeSectionFace(plane, size) {
 * @param shape The shape to section (typically a solid or shell)
 * @param plane Plane definition — a named plane ("XY", "XZ", etc.) or a Plane object
 * @param options.approximation Whether to approximate the section curves (default true)
-* @param options.planeSize Half-size of the cutting plane (default 1e4)
+* @param options.planeSize Half-size of the cutting plane. Defaults to the shape's
+*   bounding-box diagonal so large or off-origin shapes aren't clipped.
 * @returns The section result as a shape (typically containing wires/edges)
 */
-function section(shape, plane, { approximation = true, planeSize = 1e4 } = {}) {
+function section(shape, plane, { approximation = true, planeSize } = {}) {
 	if (getKernel().isNull(shape.wrapped)) return err(validationError(BrepErrorCode.NULL_SHAPE_INPUT, "section: shape is a null shape"));
-	const sectionFace = makeSectionFace(typeof plane === "string" ? unwrap(resolvePlane(plane)) : plane, planeSize);
+	const resolvedPlane = typeof plane === "string" ? unwrap(resolvePlane(plane)) : plane;
+	const { size, center } = resolveSectionPlacement(shape, resolvedPlane, planeSize);
+	const sectionFace = makeSectionFace(resolvedPlane, size, center);
 	try {
 		return ok(castResultShape(getKernel().section(shape.wrapped, sectionFace, approximation)));
 	} catch (e) {

package/dist/text.cjs

@@ -1,6 +1,6 @@
 Object.defineProperty(exports, Symbol.toStringTag, { value: "Module" });
-const require_textBlueprints = require("./textBlueprints-DKC3VIj5.cjs");
-const require_textMetrics = require("./textMetrics-CFWUMBxB.cjs");
+const require_textBlueprints = require("./textBlueprints-BqjL78Py.cjs");
+const require_textMetrics = require("./textMetrics-CWBieBcs.cjs");
 exports.fontMetrics = require_textMetrics.fontMetrics;
 exports.getFont = require_textBlueprints.getFont;
 exports.loadFont = require_textBlueprints.loadFont;

package/dist/text.js

@@ -1,3 +1,3 @@
-import { n as getFont, r as loadFont, t as textBlueprints } from "./textBlueprints-DBTQllob.js";
-import { n as textMetrics, r as sketchText, t as fontMetrics } from "./textMetrics-DpQdJjRp.js";
+import { n as getFont, r as loadFont, t as textBlueprints } from "./textBlueprints-CSCa8xco.js";
+import { n as textMetrics, r as sketchText, t as fontMetrics } from "./textMetrics-BMFYJrbQ.js";
 export { fontMetrics, getFont, loadFont, sketchText, textBlueprints, textMetrics };

package/dist/{textBlueprints-DKC3VIj5.cjs → textBlueprints-BqjL78Py.cjs}

@@ -39,7 +39,7 @@ const require_faceFns = require("./faceFns-C54Zlz7L.cjs");
 const require_curveFns = require("./curveFns-fJO3d-Hx.cjs");
 const require_arrayAccess = require("./arrayAccess-e4H9cBfh.cjs");
 const require_surfaceBuilders = require("./surfaceBuilders-BmjMJAAq.cjs");
-const require_solidBuilders = require("./solidBuilders-BJ94_pNp.cjs");
+const require_solidBuilders = require("./solidBuilders-BcEHc4TA.cjs");
 const require_blueprintSketcher = require("./blueprintSketcher-C45gRDpF.cjs");
 const require_loftFns = require("./loftFns-ETbdS4A5.cjs");
 let opentype_js = require("opentype.js");

package/dist/{textBlueprints-DBTQllob.js → textBlueprints-CSCa8xco.js}

@@ -8,7 +8,7 @@ import { v as copyShape } from "./faceFns-dy60vOjq.js";
 import { l as curveStartPoint, u as curveTangentAt } from "./curveFns-D3a4DlZj.js";
 import { n as getAtOrThrow, t as firstOrThrow } from "./arrayAccess-DrUGPADn.js";
 import { i as makeNewFaceWithinFace, r as makeFace, t as addHolesInFace } from "./surfaceBuilders-9qZyEfFZ.js";
-import { o as makeSolid, p as cutAll, t as makeCompound } from "./solidBuilders-D3LMIcIz.js";
+import { o as makeSolid, p as cutAll, t as makeCompound } from "./solidBuilders-DOo2osOC.js";
 import { r as organiseBlueprints, t as BlueprintSketcher } from "./blueprintSketcher-B9HRVab_.js";
 import { a as revolve, d as twistExtrude, o as complexExtrude, r as extrude, t as loft, u as sweep } from "./loftFns-DyH-4tYU.js";
 import opentype from "opentype.js";

package/dist/{textMetrics-DpQdJjRp.js → textMetrics-BMFYJrbQ.js}

@@ -1,5 +1,5 @@
 import { O as ok, d as validationError, t as BrepErrorCode, v as err } from "./errors-B3CDG537.js";
-import { g as wrapSketchData, i as Sketches, n as getFont, t as textBlueprints, v as CompoundSketch } from "./textBlueprints-DBTQllob.js";
+import { g as wrapSketchData, i as Sketches, n as getFont, t as textBlueprints, v as CompoundSketch } from "./textBlueprints-CSCa8xco.js";
 //#region src/text/sketchText.ts
 /**
 * Render text as 3D sketch outlines on a plane.

package/dist/{textMetrics-CFWUMBxB.cjs → textMetrics-CWBieBcs.cjs}

@@ -1,4 +1,4 @@
-const require_textBlueprints = require("./textBlueprints-DKC3VIj5.cjs");
+const require_textBlueprints = require("./textBlueprints-BqjL78Py.cjs");
 const require_errors = require("./errors-CJU8CHng.cjs");
 //#region src/text/sketchText.ts
 /**

package/dist/{threadFns-DX3YsQaj.cjs → threadFns-DVs1fpAF.cjs}

@@ -3,10 +3,10 @@ const require_errors = require("./errors-CJU8CHng.cjs");
 const require_vecOps = require("./vecOps-CCnJt-yH.cjs");
 const require_faceFns = require("./faceFns-C54Zlz7L.cjs");
 const require_shapeFns = require("./shapeFns-BRTngdGI.cjs");
-const require_solidBuilders = require("./solidBuilders-BJ94_pNp.cjs");
+const require_solidBuilders = require("./solidBuilders-BcEHc4TA.cjs");
 const require_loftFns = require("./loftFns-ETbdS4A5.cjs");
 const require_refResolveFns = require("./refResolveFns-Czi9RcEf.cjs");
-const require_primitiveFns = require("./primitiveFns-Bh9mWBfs.cjs");
+const require_primitiveFns = require("./primitiveFns-zva1hjBx.cjs");
 //#region src/utils/uuid.ts
 /** Generate a v4-style UUID string using `crypto.getRandomValues`. */
 function uuidv() {

package/dist/{threadFns-CGBSDiMt.js → threadFns-aj-opG6P.js}

@@ -3,10 +3,10 @@ import { C as isOk, O as ok, d as validationError, n as computationError, r as i
 import { d as vecNormalize, s as vecIsZero } from "./vecOps-SKPRvPH-.js";
 import { b as fromBREP } from "./faceFns-dy60vOjq.js";
 import { s as toBREP } from "./shapeFns-W7yEWaBx.js";
-import { h as fuseAll } from "./solidBuilders-D3LMIcIz.js";
+import { h as fuseAll } from "./solidBuilders-DOo2osOC.js";
 import { t as loft } from "./loftFns-DyH-4tYU.js";
 import { c as resolveRefParams } from "./refResolveFns-sh-VUGiS.js";
-import { E as wire, h as line } from "./primitiveFns-BELDRuar.js";
+import { E as wire, h as line } from "./primitiveFns-DwxLmGng.js";
 //#region src/utils/uuid.ts
 /** Generate a v4-style UUID string using `crypto.getRandomValues`. */
 function uuidv() {

package/dist/topology/booleanFns.d.ts

@@ -100,7 +100,8 @@ export declare function cutAll(base: Shape3D, tools: Shape3D[], options: Boolean
  * @param shape The shape to section (typically a solid or shell)
  * @param plane Plane definition — a named plane ("XY", "XZ", etc.) or a Plane object
  * @param options.approximation Whether to approximate the section curves (default true)
- * @param options.planeSize Half-size of the cutting plane (default 1e4)
+ * @param options.planeSize Half-size of the cutting plane. Defaults to the shape's
+ *   bounding-box diagonal so large or off-origin shapes aren't clipped.
  * @returns The section result as a shape (typically containing wires/edges)
  */
 export declare function section(shape: AnyShape<Dimension>, plane: PlaneInput, { approximation, planeSize }?: {

package/dist/topology.cjs

@@ -4,10 +4,10 @@ const require_faceFns = require("./faceFns-C54Zlz7L.cjs");
 const require_shapeFns = require("./shapeFns-BRTngdGI.cjs");
 const require_curveFns = require("./curveFns-fJO3d-Hx.cjs");
 const require_meshFns = require("./meshFns-BlgjXe87.cjs");
-const require_solidBuilders = require("./solidBuilders-BJ94_pNp.cjs");
-const require_healingFns = require("./healingFns-CRPfNXM_.cjs");
+const require_solidBuilders = require("./solidBuilders-BcEHc4TA.cjs");
+const require_healingFns = require("./healingFns-Cu73AuMH.cjs");
 const require_adjacencyFns = require("./adjacencyFns-BSvV5KIo.cjs");
-const require_primitiveFns = require("./primitiveFns-Bh9mWBfs.cjs");
+const require_primitiveFns = require("./primitiveFns-zva1hjBx.cjs");
 exports.addHoles = require_primitiveFns.addHoles;
 exports.adjacentFaces = require_adjacencyFns.adjacentFaces;
 exports.approximateCurve = require_curveFns.approximateCurve;

package/dist/topology.js

@@ -3,8 +3,8 @@ import { C as shapeType, S as iterTopo, _ as cast, a as faceOrientation, b as fr
 import { a as isSameShape, i as isEqualShape, n as getHashCode } from "./shapeFns-W7yEWaBx.js";
 import { a as curveIsPeriodic, c as curvePointAt, d as flipOrientation, f as getCurveType, h as offsetWire2D, i as curveIsClosed, l as curveStartPoint, m as interpolateCurve, n as curveAxis, o as curveLength, p as getOrientation, r as curveEndPoint, s as curvePeriod, t as approximateCurve, u as curveTangentAt } from "./curveFns-D3a4DlZj.js";
 import { d as createMeshCache, n as exportSTEP, r as exportSTL, t as exportIGES, u as clearMeshCache } from "./meshFns-BFjeEjYP.js";
-import { h as fuseAll, p as cutAll } from "./solidBuilders-D3LMIcIz.js";
-import { A as toBufferGeometryData, C as shellWithEvolution, D as getNurbsCurveData, E as fuseAllBisect, O as getNurbsSurfaceData, P as toLineGeometryData, S as intersectWithEvolution, T as cutAllBisect, _ as positionOnCurve, a as healFace, b as filletWithEvolution, g as variableFillet, j as toGroupedBufferGeometryData, k as chamferDistAngle, l as solidFromShell, n as fixSelfIntersection, o as healSolid, r as fixShape, s as healWire, t as autoHeal, v as chamferWithEvolution, w as checkBoolean, x as fuseWithEvolution, y as cutWithEvolution } from "./healingFns-DWeLpQd1.js";
+import { h as fuseAll, p as cutAll } from "./solidBuilders-DOo2osOC.js";
+import { A as toBufferGeometryData, C as shellWithEvolution, D as getNurbsCurveData, E as fuseAllBisect, O as getNurbsSurfaceData, P as toLineGeometryData, S as intersectWithEvolution, T as cutAllBisect, _ as positionOnCurve, a as healFace, b as filletWithEvolution, g as variableFillet, j as toGroupedBufferGeometryData, k as chamferDistAngle, l as solidFromShell, n as fixSelfIntersection, o as healSolid, r as fixShape, s as healWire, t as autoHeal, v as chamferWithEvolution, w as checkBoolean, x as fuseWithEvolution, y as cutWithEvolution } from "./healingFns-EoIgTx_x.js";
 import { i as facesOfEdge, l as wiresOfFace, n as adjacentFaces, o as sharedEdges, r as edgesOfFace, s as verticesOfEdge } from "./adjacencyFns-CmeUDX9T.js";
-import { C as threePointArc, D as wireLoop, E as wire, S as tangentArc, T as vertex, _ as polygon, a as circle, b as sphere, c as cylinder, d as ellipsoid, f as face, g as offsetFace, h as line, i as bsplineApprox, l as ellipse, m as helix, n as bezier, o as compound, p as filledFace, r as box, s as cone, t as addHoles, u as ellipseArc, v as sewShells, w as torus, x as subFace, y as solid } from "./primitiveFns-BELDRuar.js";
+import { C as threePointArc, D as wireLoop, E as wire, S as tangentArc, T as vertex, _ as polygon, a as circle, b as sphere, c as cylinder, d as ellipsoid, f as face, g as offsetFace, h as line, i as bsplineApprox, l as ellipse, m as helix, n as bezier, o as compound, p as filledFace, r as box, s as cone, t as addHoles, u as ellipseArc, v as sewShells, w as torus, x as subFace, y as solid } from "./primitiveFns-DwxLmGng.js";
 export { addHoles, adjacentFaces, approximateCurve, asTopo, autoHeal, bezier, box, bsplineApprox, cast, chamferDistAngle as chamferDistAngleShape, chamferWithEvolution, checkBoolean, circle, classifyPointOnFace, clearMeshCache, compound, cone, createMeshCache, curveAxis, curveEndPoint, curveIsClosed, curveIsPeriodic, curveLength, curvePeriod, curvePointAt, curveStartPoint, curveTangentAt, cutAll, cutAllBisect, cutWithEvolution, cylinder, fromBREP as deserializeShape, downcast, edgesOfFace, ellipse, ellipseArc, ellipsoid, exportIGES, exportSTEP, exportSTL, face, faceAxis, faceCenter, faceGeomType, faceOrientation, facesOfEdge, filledFace, filletWithEvolution, fixSelfIntersection, fixShape, flipFaceOrientation, flipOrientation, fuseAll, fuseAllBisect, fuseWithEvolution, getBounds, getCurveType, getEdges, getFaces, getHashCode, getNurbsCurveData, getNurbsSurfaceData, getOrientation, getSurfaceType, getVertices, getWires, healFace, healSolid, healWire, helix, innerWires, interpolateCurve, intersectWithEvolution, invalidateShapeCache, isCompSolid, isEqualShape, isSameShape, iterEdges, iterFaces, iterTopo, iterVertices, iterWires, line, normalAt, offsetFace, offsetWire2D, outerWire, pointOnSurface, polygon, positionOnCurve, projectPointOnFace, sewShells, shapeType, sharedEdges, shellWithEvolution, solid, solidFromShell, sphere, subFace, tangentArc, threePointArc, toBufferGeometryData, toGroupedBufferGeometryData, toLineGeometryData, torus, uvBounds, uvCoordinates, variableFillet, vertex, vertexPosition, verticesOfEdge, wire, wireLoop, wiresOfFace };

package/package.json

@@ -1,6 +1,6 @@
 {
   "name": "brepjs",
-  "version": "18.118.30",
+  "version": "18.118.31",
   "description": "Web CAD library with pluggable geometry kernel",
   "keywords": [
     "cad",