brepjs 18.118.3 → 18.118.4

package/dist/2d.cjs

@@ -1,11 +1,11 @@
 Object.defineProperty(exports, Symbol.toStringTag, { value: "Module" });
-const require_shapeTypes = require("./shapeTypes-BLREi6xB.cjs");
+const require_shapeTypes = require("./shapeTypes-Ca76Bklg.cjs");
 const require_errors = require("./errors-CXJtc4I7.cjs");
-const require_topologyQueryFns = require("./topologyQueryFns-1PqfeHrV.cjs");
-const require_blueprintSketcher = require("./blueprintSketcher-DADskw3h.cjs");
-const require_blueprint = require("./blueprint-BWO1xOcp.cjs");
-const require_boolean2D = require("./boolean2D-Dz2WQyK7.cjs");
-const require_blueprintFns = require("./blueprintFns-DXXKh9Ex.cjs");
+const require_topologyQueryFns = require("./topologyQueryFns-B1QAiZVI.cjs");
+const require_blueprintSketcher = require("./blueprintSketcher-XiLc6fJ4.cjs");
+const require_blueprint = require("./blueprint-Bp_sSxx2.cjs");
+const require_boolean2D = require("./boolean2D-BfKG5Wio.cjs");
+const require_blueprintFns = require("./blueprintFns-Dc8amB5a.cjs");
 //#region src/core/curve2dHandle.ts
 /**
 * Wrap a raw kernel 2D curve handle with brand + disposal tracking.

package/dist/2d.js

@@ -1,10 +1,10 @@
-import { B as createKernelHandle, Q as getKernel2D, a as createEdge } from "./shapeTypes-EI4Uxlsb.js";
+import { U as createKernelHandle, o as createEdge, tt as getKernel2D } from "./shapeTypes-BguzpBK0.js";
 import { A as ok, b as err, d as validationError, t as BrepErrorCode } from "./errors-DNWJsfVU.js";
-import { w as kernelCallRaw } from "./topologyQueryFns-BjgBf2t-.js";
-import { a as Blueprints, i as CompoundBlueprint, r as organiseBlueprints } from "./blueprintSketcher-JlCOsNp-.js";
-import { _ as Curve2D, t as Blueprint, y as BoundingBox2d } from "./blueprint-CWE241F5.js";
-import { a as fuseBlueprints, c as roundedRectangleBlueprint, i as cutBlueprints, n as fuse2D, o as intersectBlueprints, r as intersect2D, s as polysidesBlueprint, t as cut2D } from "./boolean2D-B_JB01Pu.js";
-import { S as reverseCurve, _ as curve2dIsOnCurve, a as isInside2D, b as curve2dSplitAt, c as scale2D, d as stretch2D, f as toSVGPathD, g as curve2dFirstPoint, h as curve2dDistanceFrom, i as getOrientation2D, l as sketchOnFace2D, m as curve2dBoundingBox, o as mirror2D, p as translate2D, r as getBounds2D, s as rotate2D, t as createBlueprint, u as sketchOnPlane2D, v as curve2dLastPoint, x as curve2dTangentAt, y as curve2dParameter } from "./blueprintFns-D5_7KAuL.js";
+import { w as kernelCallRaw } from "./topologyQueryFns-Dl2F-2d9.js";
+import { a as Blueprints, i as CompoundBlueprint, r as organiseBlueprints } from "./blueprintSketcher-D-xSC6Mp.js";
+import { _ as Curve2D, t as Blueprint, y as BoundingBox2d } from "./blueprint-BIf01dZl.js";
+import { a as fuseBlueprints, c as roundedRectangleBlueprint, i as cutBlueprints, n as fuse2D, o as intersectBlueprints, r as intersect2D, s as polysidesBlueprint, t as cut2D } from "./boolean2D-BNjpYyZl.js";
+import { S as reverseCurve, _ as curve2dIsOnCurve, a as isInside2D, b as curve2dSplitAt, c as scale2D, d as stretch2D, f as toSVGPathD, g as curve2dFirstPoint, h as curve2dDistanceFrom, i as getOrientation2D, l as sketchOnFace2D, m as curve2dBoundingBox, o as mirror2D, p as translate2D, r as getBounds2D, s as rotate2D, t as createBlueprint, u as sketchOnPlane2D, v as curve2dLastPoint, x as curve2dTangentAt, y as curve2dParameter } from "./blueprintFns-Dl_drDhd.js";
 //#region src/core/curve2dHandle.ts
 /**
 * Wrap a raw kernel 2D curve handle with brand + disposal tracking.

package/dist/{adjacencyFns-COWMJ1OX.cjs → adjacencyFns-CiDCunAU.cjs}

@@ -1,5 +1,5 @@
-const require_shapeTypes = require("./shapeTypes-BLREi6xB.cjs");
-const require_topologyQueryFns = require("./topologyQueryFns-1PqfeHrV.cjs");
+const require_shapeTypes = require("./shapeTypes-Ca76Bklg.cjs");
+const require_topologyQueryFns = require("./topologyQueryFns-B1QAiZVI.cjs");
 const require_constants = require("./constants-BOVyEYGH.cjs");
 //#region src/topology/adjacencyFns.ts
 /**

package/dist/{adjacencyFns-D026zKM3.js → adjacencyFns-CxepMm7H.js}

@@ -1,5 +1,5 @@
-import { Z as getKernel, r as castShapeWithKnownType } from "./shapeTypes-EI4Uxlsb.js";
-import { l as getOrCreateCache } from "./topologyQueryFns-BjgBf2t-.js";
+import { et as getKernel, i as castShapeWithKnownType } from "./shapeTypes-BguzpBK0.js";
+import { l as getOrCreateCache } from "./topologyQueryFns-Dl2F-2d9.js";
 import { n as HASH_CODE_MAX } from "./constants-ITRzCnCp.js";
 //#region src/topology/adjacencyFns.ts
 /**

package/dist/{blueprint-CWE241F5.js → blueprint-BIf01dZl.js}

@@ -1,14 +1,14 @@
-import { G as unregisterFromCleanup, Q as getKernel2D, U as registerForCleanup, Z as getKernel, a as createEdge, u as createWire } from "./shapeTypes-EI4Uxlsb.js";
+import { J as unregisterFromCleanup, K as registerForCleanup, d as createWire, et as getKernel, o as createEdge, tt as getKernel2D } from "./shapeTypes-BguzpBK0.js";
 import { n as wasmIndex } from "./vec3-Dpha8d5k.js";
 import { A as ok, R as unwrap, b as err, d as validationError, h as bug, n as computationError } from "./errors-DNWJsfVU.js";
 import { r as RAD2DEG, t as DEG2RAD } from "./constants-ITRzCnCp.js";
 import { r as toVec3 } from "./types-D24Y27N0.js";
 import { r as makePlane } from "./planeOps-DSjjtrjg.js";
-import { _ as cast, h as uvCoordinates, i as faceGeomType, m as uvBounds, r as faceCenter } from "./faceFns-Bc6sBrBV.js";
-import { p as getOrientation } from "./curveFns-pGQFlJG-.js";
+import { _ as cast, h as uvCoordinates, i as faceGeomType, m as uvBounds, r as faceCenter } from "./faceFns-CpOAl1K5.js";
+import { p as getOrientation } from "./curveFns-BYcTyyb7.js";
 import { n as getAtOrThrow, r as lastOrThrow, t as firstOrThrow } from "./arrayAccess-DrUGPADn.js";
-import { r as makeFace } from "./surfaceBuilders-C0pJwtCO.js";
-import { _ as samePoint, b as subtract2d, l as add2d, o as normalize2d, p as distance2d, t as getSingleFace, v as scalarMultiply2d } from "./helpers-BuHUd7_4.js";
+import { r as makeFace } from "./surfaceBuilders-CT__o6Be.js";
+import { _ as samePoint, b as subtract2d, l as add2d, o as normalize2d, p as distance2d, t as getSingleFace, v as scalarMultiply2d } from "./helpers-BVkEnH5n.js";
 //#region src/2d/lib/definitions.ts
 /** Type guard that checks whether a value is a `Point2D`. */
 function isPoint2D(point) {
@@ -800,7 +800,8 @@ var Blueprint = class Blueprint {
 	* @returns A new stretched Blueprint.
 	*/
 	stretch(ratio, direction, origin = [0, 0]) {
-		return new Blueprint(transformCurves(this.curves, stretchTransform2d(ratio, direction, origin)));
+		const curves = transformCurves(this.curves, stretchTransform2d(ratio, direction, origin));
+		return new Blueprint(curves);
 	}
 	/**
 	* Uniformly scale the blueprint around a center point.
@@ -811,7 +812,8 @@ var Blueprint = class Blueprint {
 	*/
 	scale(scaleFactor, center) {
 		const centerPoint = center || this.boundingBox.center;
-		return new Blueprint(transformCurves(this.curves, scaleTransform2d(scaleFactor, centerPoint)));
+		const curves = transformCurves(this.curves, scaleTransform2d(scaleFactor, centerPoint));
+		return new Blueprint(curves);
 	}
 	/**
 	* Rotate the blueprint by an angle in degrees.
@@ -821,11 +823,13 @@ var Blueprint = class Blueprint {
 	* @returns A new rotated Blueprint.
 	*/
 	rotate(angle, center) {
-		return new Blueprint(transformCurves(this.curves, rotateTransform2d(angle * DEG2RAD, center)));
+		const curves = transformCurves(this.curves, rotateTransform2d(angle * DEG2RAD, center));
+		return new Blueprint(curves);
 	}
 	translate(xDistOrPoint, yDist = 0) {
 		const translationVector = isPoint2D(xDistOrPoint) ? xDistOrPoint : [xDistOrPoint, yDist];
-		return new Blueprint(transformCurves(this.curves, translationTransform2d(translationVector)));
+		const curves = transformCurves(this.curves, translationTransform2d(translationVector));
+		return new Blueprint(curves);
 	}
 	/**
 	* Mirror the blueprint across a point or plane.
@@ -836,7 +840,8 @@ var Blueprint = class Blueprint {
 	* @returns A new mirrored Blueprint.
 	*/
 	mirror(centerOrDirection, origin = [0, 0], mode = "center") {
-		return new Blueprint(transformCurves(this.curves, mirrorTransform2d(centerOrDirection, origin, mode)));
+		const curves = transformCurves(this.curves, mirrorTransform2d(centerOrDirection, origin, mode));
+		return new Blueprint(curves);
 	}
 	/**
 	* Project this 2D blueprint onto a 3D plane, producing a wire and metadata.

package/dist/{blueprint-BWO1xOcp.cjs → blueprint-Bp_sSxx2.cjs}

@@ -1,14 +1,14 @@
-const require_shapeTypes = require("./shapeTypes-BLREi6xB.cjs");
+const require_shapeTypes = require("./shapeTypes-Ca76Bklg.cjs");
 const require_vec3 = require("./vec3-CFwOI0ZI.cjs");
 const require_errors = require("./errors-CXJtc4I7.cjs");
 const require_constants = require("./constants-BOVyEYGH.cjs");
 const require_types = require("./types-KjA8tY4Y.cjs");
 const require_planeOps = require("./planeOps-BA4HfgQu.cjs");
-const require_faceFns = require("./faceFns-rbWcdpvj.cjs");
-const require_curveFns = require("./curveFns-CpaxYpa4.cjs");
+const require_faceFns = require("./faceFns-DnLXDWq2.cjs");
+const require_curveFns = require("./curveFns-YvH970hp.cjs");
 const require_arrayAccess = require("./arrayAccess-e4H9cBfh.cjs");
-const require_surfaceBuilders = require("./surfaceBuilders-C-UhFlpS.cjs");
-const require_helpers = require("./helpers-DlLQfATr.cjs");
+const require_surfaceBuilders = require("./surfaceBuilders-De2XKidK.cjs");
+const require_helpers = require("./helpers-Beq_ugyN.cjs");
 //#region src/2d/lib/definitions.ts
 /** Type guard that checks whether a value is a `Point2D`. */
 function isPoint2D(point) {
@@ -499,7 +499,8 @@ function make2dInerpolatedBSplineCurve(points, { tolerance = .001, smoothing = n
 var make2dArcFromCenter = (startPoint, endPoint, center, longArc = false) => {
 	const midChord = require_helpers.scalarMultiply2d(require_helpers.add2d(startPoint, endPoint), .5);
 	const orientedRadius = require_helpers.distance2d(center, startPoint) * (longArc ? -1 : 1);
-	return make2dThreePointArc(startPoint, require_helpers.add2d(require_helpers.scalarMultiply2d(require_helpers.normalize2d(require_helpers.subtract2d(midChord, center)), orientedRadius), center), endPoint);
+	const midChordDir = require_helpers.normalize2d(require_helpers.subtract2d(midChord, center));
+	return make2dThreePointArc(startPoint, require_helpers.add2d(require_helpers.scalarMultiply2d(midChordDir, orientedRadius), center), endPoint);
 };
 //#endregion
 //#region src/2d/lib/svgPath.ts
@@ -800,7 +801,8 @@ var Blueprint = class Blueprint {
 	* @returns A new stretched Blueprint.
 	*/
 	stretch(ratio, direction, origin = [0, 0]) {
-		return new Blueprint(transformCurves(this.curves, stretchTransform2d(ratio, direction, origin)));
+		const curves = transformCurves(this.curves, stretchTransform2d(ratio, direction, origin));
+		return new Blueprint(curves);
 	}
 	/**
 	* Uniformly scale the blueprint around a center point.
@@ -811,7 +813,8 @@ var Blueprint = class Blueprint {
 	*/
 	scale(scaleFactor, center) {
 		const centerPoint = center || this.boundingBox.center;
-		return new Blueprint(transformCurves(this.curves, scaleTransform2d(scaleFactor, centerPoint)));
+		const curves = transformCurves(this.curves, scaleTransform2d(scaleFactor, centerPoint));
+		return new Blueprint(curves);
 	}
 	/**
 	* Rotate the blueprint by an angle in degrees.
@@ -821,11 +824,13 @@ var Blueprint = class Blueprint {
 	* @returns A new rotated Blueprint.
 	*/
 	rotate(angle, center) {
-		return new Blueprint(transformCurves(this.curves, rotateTransform2d(angle * require_constants.DEG2RAD, center)));
+		const curves = transformCurves(this.curves, rotateTransform2d(angle * require_constants.DEG2RAD, center));
+		return new Blueprint(curves);
 	}
 	translate(xDistOrPoint, yDist = 0) {
 		const translationVector = isPoint2D(xDistOrPoint) ? xDistOrPoint : [xDistOrPoint, yDist];
-		return new Blueprint(transformCurves(this.curves, translationTransform2d(translationVector)));
+		const curves = transformCurves(this.curves, translationTransform2d(translationVector));
+		return new Blueprint(curves);
 	}
 	/**
 	* Mirror the blueprint across a point or plane.
@@ -836,7 +841,8 @@ var Blueprint = class Blueprint {
 	* @returns A new mirrored Blueprint.
 	*/
 	mirror(centerOrDirection, origin = [0, 0], mode = "center") {
-		return new Blueprint(transformCurves(this.curves, mirrorTransform2d(centerOrDirection, origin, mode)));
+		const curves = transformCurves(this.curves, mirrorTransform2d(centerOrDirection, origin, mode));
+		return new Blueprint(curves);
 	}
 	/**
 	* Project this 2D blueprint onto a 3D plane, producing a wire and metadata.

package/dist/{blueprintFns-DXXKh9Ex.cjs → blueprintFns-Dc8amB5a.cjs}

@@ -1,6 +1,6 @@
 const require_errors = require("./errors-CXJtc4I7.cjs");
-const require_blueprintSketcher = require("./blueprintSketcher-DADskw3h.cjs");
-const require_blueprint = require("./blueprint-BWO1xOcp.cjs");
+const require_blueprintSketcher = require("./blueprintSketcher-XiLc6fJ4.cjs");
+const require_blueprint = require("./blueprint-Bp_sSxx2.cjs");
 //#region src/2d/lib/curve2dFns.ts
 /**
 * Return a reversed copy of the curve (non-mutating).

package/dist/{blueprintFns-D5_7KAuL.js → blueprintFns-Dl_drDhd.js}

@@ -1,6 +1,6 @@
 import { A as ok, b as err, d as validationError, t as BrepErrorCode } from "./errors-DNWJsfVU.js";
-import { i as CompoundBlueprint } from "./blueprintSketcher-JlCOsNp-.js";
-import { t as Blueprint } from "./blueprint-CWE241F5.js";
+import { i as CompoundBlueprint } from "./blueprintSketcher-D-xSC6Mp.js";
+import { t as Blueprint } from "./blueprint-BIf01dZl.js";
 //#region src/2d/lib/curve2dFns.ts
 /**
 * Return a reversed copy of the curve (non-mutating).

package/dist/{blueprintSketcher-JlCOsNp-.js → blueprintSketcher-D-xSC6Mp.js}

@@ -1,10 +1,10 @@
-import { Q as getKernel2D, Z as getKernel } from "./shapeTypes-EI4Uxlsb.js";
+import { et as getKernel, tt as getKernel2D } from "./shapeTypes-BguzpBK0.js";
 import { n as wasmIndex } from "./vec3-Dpha8d5k.js";
 import { A as ok, R as unwrap, T as isOk, b as err, h as bug, n as computationError, s as safeIndex } from "./errors-DNWJsfVU.js";
 import { r as RAD2DEG, t as DEG2RAD } from "./constants-ITRzCnCp.js";
 import { t as firstOrThrow } from "./arrayAccess-DrUGPADn.js";
-import { _ as samePoint, b as subtract2d, d as cartesianToPolar, f as crossProduct2d, g as rotate2d, h as polarToCartesian, l as add2d, m as polarAngle2d, o as normalize2d, p as distance2d, v as scalarMultiply2d } from "./helpers-BuHUd7_4.js";
-import { _ as Curve2D, c as make2dCircle, f as make2dSegmentCurve, h as approximateAsBSpline, m as make2dThreePointArc, n as asSVG, o as make2dArcFromCenter, p as make2dTangentArc, r as viewbox, s as make2dBezierCurve, t as Blueprint, u as make2dEllipseArc, x as isPoint2D, y as BoundingBox2d } from "./blueprint-CWE241F5.js";
+import { _ as samePoint, b as subtract2d, d as cartesianToPolar, f as crossProduct2d, g as rotate2d, h as polarToCartesian, l as add2d, m as polarAngle2d, o as normalize2d, p as distance2d, v as scalarMultiply2d } from "./helpers-BVkEnH5n.js";
+import { _ as Curve2D, c as make2dCircle, f as make2dSegmentCurve, h as approximateAsBSpline, m as make2dThreePointArc, n as asSVG, o as make2dArcFromCenter, p as make2dTangentArc, r as viewbox, s as make2dBezierCurve, t as Blueprint, u as make2dEllipseArc, x as isPoint2D, y as BoundingBox2d } from "./blueprint-BIf01dZl.js";
 //#region node_modules/flatqueue/index.js
 /**
 * @typedef {Float64ArrayConstructor | Float32ArrayConstructor |
@@ -682,7 +682,8 @@ function removeCorner(firstCurve, secondCurve, radius) {
 	const center = potentialCenter;
 	const splitForFillet = (curve, offsetCurve) => {
 		const [x, y] = offsetCurve.tangentAt(center);
-		const splitPoint = add2d(center, scalarMultiply2d(normalize2d([-y, x]), offset));
+		const normal = normalize2d([-y, x]);
+		const splitPoint = add2d(center, scalarMultiply2d(normal, offset));
 		const splitParam = unwrap(curve.parameter(splitPoint, 1e-6));
 		return curve.splitAt([splitParam]);
 	};

package/dist/{blueprintSketcher-DADskw3h.cjs → blueprintSketcher-XiLc6fJ4.cjs}

@@ -1,10 +1,10 @@
-const require_shapeTypes = require("./shapeTypes-BLREi6xB.cjs");
+const require_shapeTypes = require("./shapeTypes-Ca76Bklg.cjs");
 const require_vec3 = require("./vec3-CFwOI0ZI.cjs");
 const require_errors = require("./errors-CXJtc4I7.cjs");
 const require_constants = require("./constants-BOVyEYGH.cjs");
 const require_arrayAccess = require("./arrayAccess-e4H9cBfh.cjs");
-const require_helpers = require("./helpers-DlLQfATr.cjs");
-const require_blueprint = require("./blueprint-BWO1xOcp.cjs");
+const require_helpers = require("./helpers-Beq_ugyN.cjs");
+const require_blueprint = require("./blueprint-Bp_sSxx2.cjs");
 //#region node_modules/flatqueue/index.js
 /**
 * @typedef {Float64ArrayConstructor | Float32ArrayConstructor |
@@ -682,7 +682,8 @@ function removeCorner(firstCurve, secondCurve, radius) {
 	const center = potentialCenter;
 	const splitForFillet = (curve, offsetCurve) => {
 		const [x, y] = offsetCurve.tangentAt(center);
-		const splitPoint = require_helpers.add2d(center, require_helpers.scalarMultiply2d(require_helpers.normalize2d([-y, x]), offset));
+		const normal = require_helpers.normalize2d([-y, x]);
+		const splitPoint = require_helpers.add2d(center, require_helpers.scalarMultiply2d(normal, offset));
 		const splitParam = require_errors.unwrap(curve.parameter(splitPoint, 1e-6));
 		return curve.splitAt([splitParam]);
 	};

package/dist/{boolean2D-B_JB01Pu.js → boolean2D-BNjpYyZl.js}

@@ -1,10 +1,10 @@
 import { n as wasmIndex } from "./vec3-Dpha8d5k.js";
 import { R as unwrap, h as bug, s as safeIndex } from "./errors-DNWJsfVU.js";
 import { r as lastOrThrow } from "./arrayAccess-DrUGPADn.js";
-import { v as zip } from "./surfaceBuilders-C0pJwtCO.js";
-import { a as Blueprints, i as CompoundBlueprint, l as intersectCurves, r as organiseBlueprints, t as BlueprintSketcher, u as Flatbush } from "./blueprintSketcher-JlCOsNp-.js";
-import { _ as samePoint$1, b as subtract2d, f as crossProduct2d, s as PRECISION_INTERSECTION } from "./helpers-BuHUd7_4.js";
-import { b as removeDuplicatePoints, f as make2dSegmentCurve, t as Blueprint } from "./blueprint-CWE241F5.js";
+import { v as zip } from "./surfaceBuilders-CT__o6Be.js";
+import { a as Blueprints, i as CompoundBlueprint, l as intersectCurves, r as organiseBlueprints, t as BlueprintSketcher, u as Flatbush } from "./blueprintSketcher-D-xSC6Mp.js";
+import { _ as samePoint$1, b as subtract2d, f as crossProduct2d, s as PRECISION_INTERSECTION } from "./helpers-BVkEnH5n.js";
+import { b as removeDuplicatePoints, f as make2dSegmentCurve, t as Blueprint } from "./blueprint-BIf01dZl.js";
 //#region src/2d/blueprints/cannedBlueprints.ts
 /**
 * Create a regular polygon blueprint inscribed in a circle of the given radius.
@@ -642,7 +642,7 @@ var fuseIntersectingBlueprints = (blueprints) => {
 		else {
 			savedBlueprint = {
 				current: inputBlueprint,
-				fusedWith: new Set([i])
+				fusedWith: /* @__PURE__ */ new Set([i])
 			};
 			output.push(savedBlueprint);
 		}

package/dist/{boolean2D-Dz2WQyK7.cjs → boolean2D-BfKG5Wio.cjs}

@@ -1,10 +1,10 @@
 const require_vec3 = require("./vec3-CFwOI0ZI.cjs");
 const require_errors = require("./errors-CXJtc4I7.cjs");
 const require_arrayAccess = require("./arrayAccess-e4H9cBfh.cjs");
-const require_surfaceBuilders = require("./surfaceBuilders-C-UhFlpS.cjs");
-const require_blueprintSketcher = require("./blueprintSketcher-DADskw3h.cjs");
-const require_helpers = require("./helpers-DlLQfATr.cjs");
-const require_blueprint = require("./blueprint-BWO1xOcp.cjs");
+const require_surfaceBuilders = require("./surfaceBuilders-De2XKidK.cjs");
+const require_blueprintSketcher = require("./blueprintSketcher-XiLc6fJ4.cjs");
+const require_helpers = require("./helpers-Beq_ugyN.cjs");
+const require_blueprint = require("./blueprint-Bp_sSxx2.cjs");
 //#region src/2d/blueprints/cannedBlueprints.ts
 /**
 * Create a regular polygon blueprint inscribed in a circle of the given radius.
@@ -642,7 +642,7 @@ var fuseIntersectingBlueprints = (blueprints) => {
 		else {
 			savedBlueprint = {
 				current: inputBlueprint,
-				fusedWith: new Set([i])
+				fusedWith: /* @__PURE__ */ new Set([i])
 			};
 			output.push(savedBlueprint);
 		}
@@ -787,7 +787,8 @@ var cut2D = (first, second) => {
 		const wrapper = require_errors.safeIndex(first.blueprints, 0, "cut2D");
 		if (second instanceof require_blueprint.Blueprint && !second.intersects(wrapper)) {
 			if (!wrapper.isInside(second.firstPoint)) return first.clone();
-			return require_blueprintSketcher.organiseBlueprints([wrapper, ...allBlueprints(fuse2D(second, new require_blueprintSketcher.Blueprints(first.blueprints.slice(1))))]);
+			const cuts = fuse2D(second, new require_blueprintSketcher.Blueprints(first.blueprints.slice(1)));
+			return require_blueprintSketcher.organiseBlueprints([wrapper, ...allBlueprints(cuts)]);
 		} else {
 			let out = cut2D(wrapper, second);
 			first.blueprints.slice(1).forEach((bp) => {

package/dist/brepjs.cjs

@@ -1,38 +1,38 @@
 Object.defineProperty(exports, Symbol.toStringTag, { value: "Module" });
-const require_textBlueprints = require("./textBlueprints-bCq3ARXX.cjs");
-const require_shapeTypes = require("./shapeTypes-BLREi6xB.cjs");
-const require_occtWasmAdapter = require("./occtWasmAdapter-B2TEQOjs.cjs");
+const require_textBlueprints = require("./textBlueprints-C17PPSzH.cjs");
+const require_shapeTypes = require("./shapeTypes-Ca76Bklg.cjs");
+const require_occtWasmAdapter = require("./occtWasmAdapter-Bj9dX3Lb.cjs");
 const require_vec3 = require("./vec3-CFwOI0ZI.cjs");
 const require_errors = require("./errors-CXJtc4I7.cjs");
-const require_topologyQueryFns = require("./topologyQueryFns-1PqfeHrV.cjs");
+const require_topologyQueryFns = require("./topologyQueryFns-B1QAiZVI.cjs");
 const require_constants = require("./constants-BOVyEYGH.cjs");
 const require_types = require("./types-KjA8tY4Y.cjs");
 const require_vecOps = require("./vecOps-CCnJt-yH.cjs");
 const require_planeOps = require("./planeOps-BA4HfgQu.cjs");
-const require_faceFns = require("./faceFns-rbWcdpvj.cjs");
-const require_shapeFns = require("./shapeFns-B1OEuRBI.cjs");
-const require_curveFns = require("./curveFns-CpaxYpa4.cjs");
-const require_meshFns = require("./meshFns-BGmOr5aJ.cjs");
+const require_faceFns = require("./faceFns-DnLXDWq2.cjs");
+const require_shapeFns = require("./shapeFns-DxAhtxFP.cjs");
+const require_curveFns = require("./curveFns-YvH970hp.cjs");
+const require_meshFns = require("./meshFns-BoF6g1go.cjs");
 const require_arrayAccess = require("./arrayAccess-e4H9cBfh.cjs");
-const require_surfaceBuilders = require("./surfaceBuilders-C-UhFlpS.cjs");
-const require_solidBuilders = require("./solidBuilders-BOMmoOg7.cjs");
-const require_healingFns = require("./healingFns-DQquJMYs.cjs");
-const require_threadFns = require("./threadFns-BDdzaSTO.cjs");
-const require_blueprintSketcher = require("./blueprintSketcher-DADskw3h.cjs");
-const require_helpers = require("./helpers-DlLQfATr.cjs");
-const require_drawFns = require("./drawFns-BosHTxzi.cjs");
-const require_measureFns = require("./measureFns-I5KcAgSb.cjs");
-const require_cornerFinder = require("./cornerFinder-DP74f1wh.cjs");
-const require_boolean2D = require("./boolean2D-Dz2WQyK7.cjs");
-const require_blueprintFns = require("./blueprintFns-DXXKh9Ex.cjs");
-const require_importFns = require("./importFns-BRaiuN1y.cjs");
-const require_loftFns = require("./loftFns-BQktV4u4.cjs");
-const require_cameraFns = require("./cameraFns-BAm-2Clq.cjs");
-const require_textMetrics = require("./textMetrics-wX3dlabq.cjs");
-const require_adjacencyFns = require("./adjacencyFns-COWMJ1OX.cjs");
-const require_refResolveFns = require("./refResolveFns-Dku4ocdG.cjs");
+const require_surfaceBuilders = require("./surfaceBuilders-De2XKidK.cjs");
+const require_solidBuilders = require("./solidBuilders-yyfZ2Q-7.cjs");
+const require_healingFns = require("./healingFns-BIcPeCM9.cjs");
+const require_threadFns = require("./threadFns-Bu2c-lu_.cjs");
+const require_blueprintSketcher = require("./blueprintSketcher-XiLc6fJ4.cjs");
+const require_helpers = require("./helpers-Beq_ugyN.cjs");
+const require_drawFns = require("./drawFns-CG3ksr6q.cjs");
+const require_measureFns = require("./measureFns-C4BxD4kC.cjs");
+const require_cornerFinder = require("./cornerFinder-CINnfCPc.cjs");
+const require_boolean2D = require("./boolean2D-BfKG5Wio.cjs");
+const require_blueprintFns = require("./blueprintFns-Dc8amB5a.cjs");
+const require_importFns = require("./importFns-BZYgEOu-.cjs");
+const require_loftFns = require("./loftFns-CZC_NH_h.cjs");
+const require_cameraFns = require("./cameraFns-ClE0QcuX.cjs");
+const require_textMetrics = require("./textMetrics-BwQ7TD47.cjs");
+const require_adjacencyFns = require("./adjacencyFns-CiDCunAU.cjs");
+const require_refResolveFns = require("./refResolveFns-DbTYd_Nj.cjs");
 const require_workerPool = require("./workerPool-D30NsiIW.cjs");
-const require_primitiveFns = require("./primitiveFns-ht0yFv6T.cjs");
+const require_primitiveFns = require("./primitiveFns-DOyyz54-.cjs");
 //#region src/topology/shapeBooleans.ts
 var BOPAlgo_GlueShift = 1;
 var BOPAlgo_GlueFull = 2;
@@ -2525,7 +2525,7 @@ function solveAxisAxisDistance(ref, dep, extra) {
 * `distance`), keyed `${entityA}-${entityB}`. Both orders are listed where the
 * solver handles them, so a user need not pre-order the entities.
 */
-var TRANSLATIONAL_PAIRS = new Set([
+var TRANSLATIONAL_PAIRS = /* @__PURE__ */ new Set([
 	"plane-plane",
 	"plane-point",
 	"point-plane",
@@ -2539,7 +2539,7 @@ var REQUIRED_ENTITIES = {
 	angle: "plane",
 	concentric: "axis"
 };
-var POSITIONING_TYPES = new Set([
+var POSITIONING_TYPES = /* @__PURE__ */ new Set([
 	"coincident",
 	"distance",
 	"angle",
@@ -5019,7 +5019,7 @@ function param(name) {
 		kind: "Param",
 		name,
 		structuralHash: fnvMixString(startHash$1("Param"), name),
-		freeParams: new Set([name])
+		freeParams: /* @__PURE__ */ new Set([name])
 	};
 }
 function binOp(op, a, b) {

package/dist/brepjs.js

@@ -1,37 +1,37 @@
-import { $ as getKernelCapabilities, A as planarWire, B as createKernelHandle, C as isOrientedFace, D as manifoldShell, E as isValidSolid, F as as3D, H as isLive, I as is2D, J as withScopeResultAsync, K as withScope, L as is3D, M as getShapeKind, O as orientedFace, P as as2D, R as DisposalScope, S as isManifoldShell, T as isPlanarWire, V as getDisposalStats, W as resetDisposalStats, X as getActiveKernelId, Y as _usingCtx, Z as getKernel, _ as isSolid, a as createEdge, at as registerKernel, b as closedWire, c as createSolid, ct as withQuality, d as isCompound, dt as supportsProjection, et as getKernelTier, f as isEdge, ft as BrepkitAdapter, g as isShell, gt as qualityDeflection, h as isShape3D, ht as currentQuality, i as createCompound, it as prewarm, j as validSolid, k as planarFace, l as createVertex, lt as withTier, m as isShape1D, mt as resetPerformanceStats, n as castShape3D, nt as initFromManifold, o as createFace, ot as registerKernelTier, p as isFace, pt as getPerformanceStats, q as withScopeResult, rt as initFromOC, s as createShell, st as withKernel, t as castShape, tt as init, u as createWire, ut as supportsConstraintSketch, v as isVertex, w as isPlanarFace, x as isClosedWire, y as isWire, z as createHandle } from "./shapeTypes-EI4Uxlsb.js";
-import { D as DEFAULT_CAPABILITIES, O as EXACT_BREP_CAPABILITIES, t as OcctWasmAdapter } from "./occtWasmAdapter-CKwtxwNH.js";
+import { $ as getActiveKernelId, A as manifoldShell, B as is3D, C as closedWire, D as isPlanarFace, E as isOrientedFace, F as getShapeKind, G as isLive, H as createHandle, L as as2D, M as planarFace, N as planarWire, O as isPlanarWire, P as validSolid, Q as _usingCtx, R as as3D, S as isWire, T as isManifoldShell, U as createKernelHandle, V as DisposalScope, W as getDisposalStats, X as withScopeResult, Y as withScope, Z as withScopeResultAsync, _ as isShape1D, _t as resetPerformanceStats, a as createCompound, at as initFromManifold, b as isSolid, c as createShell, ct as registerKernel, d as createWire, dt as withQuality, et as getKernel, ft as withTier, g as isFace, gt as getPerformanceStats, h as isEdge, ht as BrepkitAdapter, it as init, j as orientedFace, k as isValidSolid, l as createSolid, lt as registerKernelTier, m as isCompound, mt as supportsProjection, n as castShape, nt as getKernelCapabilities, o as createEdge, ot as initFromOC, pt as supportsConstraintSketch, q as resetDisposalStats, r as castShape3D, rt as getKernelTier, s as createFace, st as prewarm, u as createVertex, ut as withKernel, v as isShape3D, vt as currentQuality, w as isClosedWire, x as isVertex, y as isShell, yt as qualityDeflection, z as is2D } from "./shapeTypes-BguzpBK0.js";
+import { D as DEFAULT_CAPABILITIES, O as EXACT_BREP_CAPABILITIES, t as OcctWasmAdapter } from "./occtWasmAdapter-wBLknH8f.js";
 import { n as wasmIndex } from "./vec3-Dpha8d5k.js";
 import { A as ok, B as unwrapOr, C as fromNullable, D as mapBoth, E as map, F as tapErr, H as zip, I as tryCatch, L as tryCatchAsync, M as orElse, N as pipeline, O as mapErr, P as tap, R as unwrap, S as flatten, T as isOk, V as unwrapOrElse, _ as all, a as moduleInitError, b as err, c as sketcherStateError, d as validationError, g as OK, h as bug, i as kernelError, j as or, k as match, l as typeCastError, m as BrepBugError, n as computationError, o as queryError, r as ioError, t as BrepErrorCode, u as unsupportedError, v as andThen, w as isErr, x as flatMap, y as collect, z as unwrapErr } from "./errors-DNWJsfVU.js";
-import { C as kernelCall, S as vertexPosition, T as kernelCallScoped, _ as iterFaces, a as getCachedSurfaceType, b as iterVertices, c as getFaces, d as getSolids, f as getVertices, g as iterEdges, h as iterCompSolids, m as invalidateShapeCache, n as getBounds, o as getCompSolids, p as getWires, s as getEdges, t as describe$1, u as getShells, v as iterShells, w as kernelCallRaw, x as iterWires, y as iterSolids } from "./topologyQueryFns-BjgBf2t-.js";
+import { C as kernelCall, S as vertexPosition, T as kernelCallScoped, _ as iterFaces, a as getCachedSurfaceType, b as iterVertices, c as getFaces, d as getSolids, f as getVertices, g as iterEdges, h as iterCompSolids, m as invalidateShapeCache, n as getBounds, o as getCompSolids, p as getWires, s as getEdges, t as describe$1, u as getShells, v as iterShells, w as kernelCallRaw, x as iterWires, y as iterSolids } from "./topologyQueryFns-Dl2F-2d9.js";
 import { n as HASH_CODE_MAX, r as RAD2DEG, t as DEG2RAD } from "./constants-ITRzCnCp.js";
 import { n as toVec2, r as toVec3, t as resolveDirection } from "./types-D24Y27N0.js";
 import { a as vecDot, c as vecLength, d as vecNormalize, f as vecProjectToPlane, g as vecSub, h as vecScale, i as vecDistance, l as vecLengthSq, m as vecRotate, n as vecAngle, o as vecEquals, p as vecRepr, r as vecCross, s as vecIsZero, t as vecAdd, u as vecNegate } from "./vecOps-SKPRvPH-.js";
 import { i as pivotPlane, n as createPlane, o as resolvePlane, r as makePlane, s as translatePlane, t as createNamedPlane } from "./planeOps-DSjjtrjg.js";
-import { S as shapeType, _ as cast, a as faceOrientation, b as isCompSolid, c as innerWires, d as pointOnSurface, f as projectPointOnFace, g as asTopo, h as uvCoordinates, i as faceGeomType, l as normalAt, m as uvBounds, n as faceAxis, o as flipFaceOrientation, p as removeHolesFromFace, r as faceCenter, s as getSurfaceType, t as classifyPointOnFace, u as outerWire, v as downcast, x as iterTopo, y as fromBREP } from "./faceFns-Bc6sBrBV.js";
-import { A as tagFaces, C as colorShape, D as getFaceTags, E as findFacesByTag, M as setShapeOrigin, O as getTagMetadata, S as colorFaces, T as getShapeColor, a as isSameShape, c as applyMatrix$1, d as mirror$2, f as resize, g as translate$2, h as transformCopy$1, i as isEqualShape, j as getFaceOrigins, k as setTagMetadata, l as composeTransforms, m as scale$3, n as getHashCode, o as simplify$1, p as rotate$2, r as isEmpty$2, s as toBREP$1, t as clone$1, u as locate$1, v as hasAnyMetadata, w as getFaceColor, x as propagateMetadataThroughRelocation } from "./shapeFns-C2pdUzdd.js";
-import { a as curveIsPeriodic, c as curvePointAt, d as flipOrientation, f as getCurveType, h as offsetWire2D, i as curveIsClosed, l as curveStartPoint, m as interpolateCurve, n as curveAxis, o as curveLength, p as getOrientation, r as curveEndPoint, s as curvePeriod, t as approximateCurve, u as curveTangentAt } from "./curveFns-pGQFlJG-.js";
-import { a as meshEdges$1, c as meshMultiLOD, d as createMeshCache, i as mesh$1, l as buildMeshCacheKey, n as exportSTEP, o as meshLODs, r as exportSTL, s as meshLODsProgressive, t as exportIGES, u as clearMeshCache } from "./meshFns-DVrZtr-f.js";
+import { S as shapeType, _ as cast, a as faceOrientation, b as isCompSolid, c as innerWires, d as pointOnSurface, f as projectPointOnFace, g as asTopo, h as uvCoordinates, i as faceGeomType, l as normalAt, m as uvBounds, n as faceAxis, o as flipFaceOrientation, p as removeHolesFromFace, r as faceCenter, s as getSurfaceType, t as classifyPointOnFace, u as outerWire, v as downcast, x as iterTopo, y as fromBREP } from "./faceFns-CpOAl1K5.js";
+import { A as tagFaces, C as colorShape, D as getFaceTags, E as findFacesByTag, M as setShapeOrigin, O as getTagMetadata, S as colorFaces, T as getShapeColor, a as isSameShape, c as applyMatrix$1, d as mirror$2, f as resize, g as translate$2, h as transformCopy$1, i as isEqualShape, j as getFaceOrigins, k as setTagMetadata, l as composeTransforms, m as scale$3, n as getHashCode, o as simplify$1, p as rotate$2, r as isEmpty$2, s as toBREP$1, t as clone$1, u as locate$1, v as hasAnyMetadata, w as getFaceColor, x as propagateMetadataThroughRelocation } from "./shapeFns-DED4C70_.js";
+import { a as curveIsPeriodic, c as curvePointAt, d as flipOrientation, f as getCurveType, h as offsetWire2D, i as curveIsClosed, l as curveStartPoint, m as interpolateCurve, n as curveAxis, o as curveLength, p as getOrientation, r as curveEndPoint, s as curvePeriod, t as approximateCurve, u as curveTangentAt } from "./curveFns-BYcTyyb7.js";
+import { a as meshEdges$1, c as meshMultiLOD, d as createMeshCache, i as mesh$1, l as buildMeshCacheKey, n as exportSTEP, o as meshLODs, r as exportSTL, s as meshLODsProgressive, t as exportIGES, u as clearMeshCache } from "./meshFns-BK5O_pJ9.js";
 import { n as getAtOrThrow, r as lastOrThrow, t as firstOrThrow } from "./arrayAccess-DrUGPADn.js";
-import { _ as makeThreePointArc, d as makeCircle, h as makeLine, l as makeBSplineInterpolation, n as fill, r as makeFace, s as assembleWire } from "./surfaceBuilders-C0pJwtCO.js";
-import { _ as section$1, b as split$1, d as booleanPipeline, f as cut$2, g as intersect$2, h as fuseAll$2, m as fuse$2, p as cutAll$2, r as makeCylinder, t as makeCompound, v as sectionToFace$1, y as slice$1 } from "./solidBuilders-BsAa59Dz.js";
-import { A as toBufferGeometryData, C as shellWithEvolution, D as getNurbsCurveData, E as fuseAllBisect, M as toLODGeometryData, N as toLODGeometryLevels, O as getNurbsSurfaceData, P as toLineGeometryData, S as intersectWithEvolution, T as cutAllBisect, _ as positionOnCurve, a as healFace, b as filletWithEvolution, c as isValid$1, d as draft$1, f as fillet$1, g as variableFillet, h as thicken$1, i as heal$1, j as toGroupedBufferGeometryData, k as chamferDistAngle, l as solidFromShell, m as shell$1, n as fixSelfIntersection, o as healSolid, p as offset$1, r as fixShape, s as healWire, t as autoHeal, u as chamfer$1, v as chamferWithEvolution, w as checkBoolean, x as fuseWithEvolution, y as cutWithEvolution } from "./healingFns-CCsV3Ug-.js";
-import { A as setJointValue, B as createAssemblyNode, C as cylindricalJoint, D as planarJoint, E as mechanismDOF, F as quatMultiply, G as circularPattern, H as removeChild, I as quatRotate, J as exportAssemblySTEP, K as gridPattern, L as addChild, M as sphericalJoint, N as quatFromAxisAngle, O as prismaticJoint, P as quatFromTo, R as collectShapes, S as addJoint, T as jointTransform, U as updateNode, V as findNode, W as walkAssembly, Y as createAssembly, _ as exportURDF, a as deserializeHistory, b as inverseKinematics, c as modifyStep, d as replayFrom, f as replayHistory, g as undoLast, h as stepsFrom, i as createRegistry, j as setJointValues, k as revoluteJoint, l as registerOperation, m as stepCount, n as addStep, o as findStep, p as serializeHistory, q as linearPattern, r as createHistory, s as getShape, t as thread, u as registerShape, v as importURDF, w as forwardKinematics, x as jointTrajectory, y as jointsFromDH, z as countNodes } from "./threadFns-DluMGkMf.js";
-import { n as BaseSketcher2d, r as organiseBlueprints, t as BlueprintSketcher } from "./blueprintSketcher-JlCOsNp-.js";
-import { a as createTypedFinder, i as wireFinder, n as edgeFinder, r as faceFinder, t as getSingleFace } from "./helpers-BuHUd7_4.js";
-import { A as sketchEllipse, D as makeBaseBox, E as deserializeDrawing, F as sketchRectangle, I as sketchRoundedRectangle, L as FaceSketcher, M as sketchHelix, N as sketchParametricFunction, O as polysideInnerRadius, P as sketchPolysides, R as Sketcher, S as drawText, _ as drawPolysides, a as drawingIntersect, b as drawSingleCircle, c as rotateDrawing, d as drawFaceOutline, f as drawProjection, g as drawPointsInterpolation, h as drawParametricFunction, i as drawingFuse, j as sketchFaceOffset, k as sketchCircle, l as scaleDrawing, m as drawEllipse, n as drawingCut, o as drawingToSketchOnPlane, p as drawCircle, r as drawingFillet, s as mirrorDrawing, t as drawingChamfer, u as translateDrawing, v as drawRectangle, w as draw, x as drawSingleEllipse, y as drawRoundedRectangle } from "./drawFns-DKyAWSPe.js";
-import { a as measureDistance, c as measureLinearProps, d as measureVolumeProps, i as measureCurvatureAtMid, l as measureSurfaceProps, n as measureArea, o as measureDistanceProps, r as measureCurvatureAt, s as measureLength, t as createDistanceQuery, u as measureVolume } from "./measureFns-B_vJqwDc.js";
-import { t as cornerFinder } from "./cornerFinder-oxZraULr.js";
-import { a as fuseBlueprints, c as roundedRectangleBlueprint, i as cutBlueprints, n as fuse2D, o as intersectBlueprints, r as intersect2D, s as polysidesBlueprint, t as cut2D } from "./boolean2D-B_JB01Pu.js";
-import { S as reverseCurve, _ as curve2dIsOnCurve, a as isInside2D, b as curve2dSplitAt, c as scale2D, d as stretch2D, f as toSVGPathD, g as curve2dFirstPoint, h as curve2dDistanceFrom, i as getOrientation2D, l as sketchOnFace2D, m as curve2dBoundingBox, n as createCompoundBlueprint, o as mirror2D, p as translate2D, r as getBounds2D, s as rotate2D, t as createBlueprint, u as sketchOnPlane2D, v as curve2dLastPoint, x as curve2dTangentAt, y as curve2dParameter } from "./blueprintFns-D5_7KAuL.js";
-import { a as importSVG, c as blueprintToDXF, d as exportGltf, f as exportOBJ, i as exportSTEPConfigured, l as exportDXF, n as importSTEP, o as importSVGPathD, r as importSTL, s as exportThreeMF, t as importIGES, u as exportGlb } from "./importFns-Z6N8Addx.js";
-import { a as revolve$1, c as multiSectionSweep, d as twistExtrude, i as extrudeAll, l as supportExtrude, n as loftAll, o as complexExtrude, r as extrude$1, s as guidedSweep, t as loft$1, u as sweep$1 } from "./loftFns-CXc9tRv6.js";
-import { a as Sketch, c as compoundSketchLoft, d as sketchFace, f as sketchLoft, h as sketchWires, i as Sketches, l as compoundSketchRevolve, m as sketchSweep, n as getFont, o as compoundSketchExtrude, p as sketchRevolve, r as loadFont, s as compoundSketchFace, t as textBlueprints, u as sketchExtrude, v as CompoundSketch } from "./textBlueprints-DU1Jqvx9.js";
-import { a as makeProjectedEdges, i as projectEdges, n as cameraLookAt, r as createCamera, s as isProjectionPlane, t as cameraFromPlane } from "./cameraFns-CRln-7RT.js";
-import { n as textMetrics, r as sketchText, t as fontMetrics } from "./textMetrics-BltT5ICq.js";
-import { a as sharedEdges, c as wiresOfFace, i as facesOfVertex, n as edgesOfFace, o as verticesOfEdge, r as facesOfEdge, s as verticesOfFace, t as adjacentFaces } from "./adjacencyFns-D026zKM3.js";
-import { _ as createRef, a as isVertexRef, b as defaultScorer, c as resolveRefParams, d as createVertexRef, f as resolveVertexRef, g as captureHint, h as assignRoles, i as isLineageRef, l as createDerivedFaceRef, m as resolveEdgeRef, n as isEdgeRef, o as resolveLineageRef, p as createEdgeRef, r as isFaceRef, s as resolveRefIn, t as isDerivedFaceRef, u as resolveDerivedFaceRef, v as resolveRef, y as updateRoles } from "./refResolveFns-CEojVVeD.js";
+import { _ as makeThreePointArc, d as makeCircle, h as makeLine, l as makeBSplineInterpolation, n as fill, r as makeFace, s as assembleWire } from "./surfaceBuilders-CT__o6Be.js";
+import { _ as section$1, b as split$1, d as booleanPipeline, f as cut$2, g as intersect$2, h as fuseAll$2, m as fuse$2, p as cutAll$2, r as makeCylinder, t as makeCompound, v as sectionToFace$1, y as slice$1 } from "./solidBuilders-_8mqPO7I.js";
+import { A as toBufferGeometryData, C as shellWithEvolution, D as getNurbsCurveData, E as fuseAllBisect, M as toLODGeometryData, N as toLODGeometryLevels, O as getNurbsSurfaceData, P as toLineGeometryData, S as intersectWithEvolution, T as cutAllBisect, _ as positionOnCurve, a as healFace, b as filletWithEvolution, c as isValid$1, d as draft$1, f as fillet$1, g as variableFillet, h as thicken$1, i as heal$1, j as toGroupedBufferGeometryData, k as chamferDistAngle, l as solidFromShell, m as shell$1, n as fixSelfIntersection, o as healSolid, p as offset$1, r as fixShape, s as healWire, t as autoHeal, u as chamfer$1, v as chamferWithEvolution, w as checkBoolean, x as fuseWithEvolution, y as cutWithEvolution } from "./healingFns-BP0xjoIs.js";
+import { A as setJointValue, B as createAssemblyNode, C as cylindricalJoint, D as planarJoint, E as mechanismDOF, F as quatMultiply, G as circularPattern, H as removeChild, I as quatRotate, J as exportAssemblySTEP, K as gridPattern, L as addChild, M as sphericalJoint, N as quatFromAxisAngle, O as prismaticJoint, P as quatFromTo, R as collectShapes, S as addJoint, T as jointTransform, U as updateNode, V as findNode, W as walkAssembly, Y as createAssembly, _ as exportURDF, a as deserializeHistory, b as inverseKinematics, c as modifyStep, d as replayFrom, f as replayHistory, g as undoLast, h as stepsFrom, i as createRegistry, j as setJointValues, k as revoluteJoint, l as registerOperation, m as stepCount, n as addStep, o as findStep, p as serializeHistory, q as linearPattern, r as createHistory, s as getShape, t as thread, u as registerShape, v as importURDF, w as forwardKinematics, x as jointTrajectory, y as jointsFromDH, z as countNodes } from "./threadFns-DOqhI5OK.js";
+import { n as BaseSketcher2d, r as organiseBlueprints, t as BlueprintSketcher } from "./blueprintSketcher-D-xSC6Mp.js";
+import { a as createTypedFinder, i as wireFinder, n as edgeFinder, r as faceFinder, t as getSingleFace } from "./helpers-BVkEnH5n.js";
+import { A as sketchEllipse, D as makeBaseBox, E as deserializeDrawing, F as sketchRectangle, I as sketchRoundedRectangle, L as FaceSketcher, M as sketchHelix, N as sketchParametricFunction, O as polysideInnerRadius, P as sketchPolysides, R as Sketcher, S as drawText, _ as drawPolysides, a as drawingIntersect, b as drawSingleCircle, c as rotateDrawing, d as drawFaceOutline, f as drawProjection, g as drawPointsInterpolation, h as drawParametricFunction, i as drawingFuse, j as sketchFaceOffset, k as sketchCircle, l as scaleDrawing, m as drawEllipse, n as drawingCut, o as drawingToSketchOnPlane, p as drawCircle, r as drawingFillet, s as mirrorDrawing, t as drawingChamfer, u as translateDrawing, v as drawRectangle, w as draw, x as drawSingleEllipse, y as drawRoundedRectangle } from "./drawFns-DkhqDgS5.js";
+import { a as measureDistance, c as measureLinearProps, d as measureVolumeProps, i as measureCurvatureAtMid, l as measureSurfaceProps, n as measureArea, o as measureDistanceProps, r as measureCurvatureAt, s as measureLength, t as createDistanceQuery, u as measureVolume } from "./measureFns-BLmLZr0K.js";
+import { t as cornerFinder } from "./cornerFinder-DFswCdwf.js";
+import { a as fuseBlueprints, c as roundedRectangleBlueprint, i as cutBlueprints, n as fuse2D, o as intersectBlueprints, r as intersect2D, s as polysidesBlueprint, t as cut2D } from "./boolean2D-BNjpYyZl.js";
+import { S as reverseCurve, _ as curve2dIsOnCurve, a as isInside2D, b as curve2dSplitAt, c as scale2D, d as stretch2D, f as toSVGPathD, g as curve2dFirstPoint, h as curve2dDistanceFrom, i as getOrientation2D, l as sketchOnFace2D, m as curve2dBoundingBox, n as createCompoundBlueprint, o as mirror2D, p as translate2D, r as getBounds2D, s as rotate2D, t as createBlueprint, u as sketchOnPlane2D, v as curve2dLastPoint, x as curve2dTangentAt, y as curve2dParameter } from "./blueprintFns-Dl_drDhd.js";
+import { a as importSVG, c as blueprintToDXF, d as exportGltf, f as exportOBJ, i as exportSTEPConfigured, l as exportDXF, n as importSTEP, o as importSVGPathD, r as importSTL, s as exportThreeMF, t as importIGES, u as exportGlb } from "./importFns-DPQmk2TS.js";
+import { a as revolve$1, c as multiSectionSweep, d as twistExtrude, i as extrudeAll, l as supportExtrude, n as loftAll, o as complexExtrude, r as extrude$1, s as guidedSweep, t as loft$1, u as sweep$1 } from "./loftFns-NauDWzek.js";
+import { a as Sketch, c as compoundSketchLoft, d as sketchFace, f as sketchLoft, h as sketchWires, i as Sketches, l as compoundSketchRevolve, m as sketchSweep, n as getFont, o as compoundSketchExtrude, p as sketchRevolve, r as loadFont, s as compoundSketchFace, t as textBlueprints, u as sketchExtrude, v as CompoundSketch } from "./textBlueprints-D9l3v-f3.js";
+import { a as makeProjectedEdges, i as projectEdges, n as cameraLookAt, r as createCamera, s as isProjectionPlane, t as cameraFromPlane } from "./cameraFns-DyMKpFHq.js";
+import { n as textMetrics, r as sketchText, t as fontMetrics } from "./textMetrics-GSAxEtaJ.js";
+import { a as sharedEdges, c as wiresOfFace, i as facesOfVertex, n as edgesOfFace, o as verticesOfEdge, r as facesOfEdge, s as verticesOfFace, t as adjacentFaces } from "./adjacencyFns-CxepMm7H.js";
+import { _ as createRef, a as isVertexRef, b as defaultScorer, c as resolveRefParams, d as createVertexRef, f as resolveVertexRef, g as captureHint, h as assignRoles, i as isLineageRef, l as createDerivedFaceRef, m as resolveEdgeRef, n as isEdgeRef, o as resolveLineageRef, p as createEdgeRef, r as isFaceRef, s as resolveRefIn, t as isDerivedFaceRef, u as resolveDerivedFaceRef, v as resolveRef, y as updateRoles } from "./refResolveFns-DL1zXF8u.js";
 import { _ as isSuccessResponse, a as createWorkerClient, c as enqueueTask, d as rejectAll, f as isBatchRequest, g as isOperationRequest, h as isInitRequest, i as registerHandler, l as isEmpty$1, m as isErrorResponse, n as createOperationRegistry, o as createTaskQueue, p as isDisposeRequest, r as createWorkerHandler, s as dequeueTask, t as createWorkerPool, u as pendingCount } from "./workerPool-XcYX2UZ0.js";
-import { C as threePointArc, D as wireLoop, E as wire, S as tangentArc, T as vertex, _ as polygon, a as circle, b as sphere$1, c as cylinder, d as ellipsoid, f as face, g as offsetFace, h as line, i as bsplineApprox, l as ellipse, m as helix, n as bezier, o as compound, p as filledFace, r as box, s as cone, t as addHoles, u as ellipseArc, v as sewShells, w as torus$1, x as subFace, y as solid } from "./primitiveFns-DiOCVk8q.js";
+import { C as threePointArc, D as wireLoop, E as wire, S as tangentArc, T as vertex, _ as polygon, a as circle, b as sphere$1, c as cylinder, d as ellipsoid, f as face, g as offsetFace, h as line, i as bsplineApprox, l as ellipse, m as helix, n as bezier, o as compound, p as filledFace, r as box, s as cone, t as addHoles, u as ellipseArc, v as sewShells, w as torus$1, x as subFace, y as solid } from "./primitiveFns-DJUXtN6W.js";
 //#region \0rolldown/runtime.js
 var __defProp = Object.defineProperty;
 var __exportAll = (all, no_symbols) => {
@@ -2536,7 +2536,7 @@ function solveAxisAxisDistance(ref, dep, extra) {
 * `distance`), keyed `${entityA}-${entityB}`. Both orders are listed where the
 * solver handles them, so a user need not pre-order the entities.
 */
-var TRANSLATIONAL_PAIRS = new Set([
+var TRANSLATIONAL_PAIRS = /* @__PURE__ */ new Set([
 	"plane-plane",
 	"plane-point",
 	"point-plane",
@@ -2550,7 +2550,7 @@ var REQUIRED_ENTITIES = {
 	angle: "plane",
 	concentric: "axis"
 };
-var POSITIONING_TYPES = new Set([
+var POSITIONING_TYPES = /* @__PURE__ */ new Set([
 	"coincident",
 	"distance",
 	"angle",
@@ -5022,7 +5022,7 @@ function param(name) {
 		kind: "Param",
 		name,
 		structuralHash: fnvMixString(startHash$1("Param"), name),
-		freeParams: new Set([name])
+		freeParams: /* @__PURE__ */ new Set([name])
 	};
 }
 function binOp(op, a, b) {

package/dist/{cameraFns-BAm-2Clq.cjs → cameraFns-ClE0QcuX.cjs}

@@ -1,6 +1,6 @@
-const require_shapeTypes = require("./shapeTypes-BLREi6xB.cjs");
+const require_shapeTypes = require("./shapeTypes-Ca76Bklg.cjs");
 const require_errors = require("./errors-CXJtc4I7.cjs");
-const require_topologyQueryFns = require("./topologyQueryFns-1PqfeHrV.cjs");
+const require_topologyQueryFns = require("./topologyQueryFns-B1QAiZVI.cjs");
 const require_vecOps = require("./vecOps-CCnJt-yH.cjs");
 //#region src/projection/projectionPlanes.ts
 /** Lookup table mapping each {@link ProjectionPlane} to its camera configuration. */

package/dist/{cameraFns-CRln-7RT.js → cameraFns-DyMKpFHq.js}

@@ -1,6 +1,6 @@
-import { Z as getKernel, t as castShape } from "./shapeTypes-EI4Uxlsb.js";
+import { et as getKernel, n as castShape } from "./shapeTypes-BguzpBK0.js";
 import { A as ok, b as err, d as validationError } from "./errors-DNWJsfVU.js";
-import { s as getEdges } from "./topologyQueryFns-BjgBf2t-.js";
+import { s as getEdges } from "./topologyQueryFns-Dl2F-2d9.js";
 import { c as vecLength, d as vecNormalize, g as vecSub, r as vecCross } from "./vecOps-SKPRvPH-.js";
 //#region src/projection/projectionPlanes.ts
 /** Lookup table mapping each {@link ProjectionPlane} to its camera configuration. */

package/dist/core/shapeTypes.d.ts

@@ -118,6 +118,38 @@ export declare function isShape1D<D extends Dimension>(s: AnyShape<D>): s is Sha
 export declare function castShape<D extends Dimension = '3D'>(ocShape: KernelShape, dim?: D): AnyShape<D>;
 /** Type-safe cast for shapes known to be 3D. */
 export declare function castShape3D(ocShape: KernelShape): AnyShape;
+/**
+ * Release the pre-downcast handle of a freshly-produced kernel result after it
+ * has been cast to `cast`.
+ *
+ * On occt-wasm `downcast` allocates a new arena slot and orphans the input; a
+ * handle's own `delete()` is a no-op there, so the input must be released via
+ * `getKernel().dispose()` to reclaim the slot. Kernels whose `downcast` is
+ * identity (manifold, brepkit) return the same handle as `cast`, so nothing is
+ * released — doing so would delete the shape being returned.
+ *
+ * Use only for a kernel result the caller owns outright — never for a shape
+ * received from elsewhere.
+ */
+export declare function disposeDowncastSource(source: KernelShape, cast: ShapeHandle): void;
+/**
+ * Cast a freshly-produced kernel result to its branded type and release the
+ * orphaned pre-downcast handle. The result-owning counterpart to {@link castShape};
+ * see {@link disposeDowncastSource} for the arena semantics.
+ */
+export declare function castResultShape<D extends Dimension = '3D'>(ocShape: KernelShape, dim?: D): AnyShape<D>;
+/**
+ * Fully release a transiently-branded sub-shape and the raw handle it was cast
+ * from — for a face/edge iterated only to read a property, then discarded.
+ *
+ * `handle`'s dispose updates stats and, on kernels that own their native object
+ * (Embind, manifold, brepkit), frees it. occt-wasm handles are arena-backed
+ * (their delete is a no-op), so when the downcast produced a distinct handle
+ * (`handle.wrapped !== rawSource`) both arena slots are released explicitly. The
+ * identity guard also skips manifold/brepkit — there `handle` *is* `rawSource`,
+ * already freed above, and their `dispose()` has no double-free guard.
+ */
+export declare function disposeTransientSubShape(handle: ShapeHandle, rawSource: KernelShape): void;
 /**
  * Fast-path cast when the shape type is already known (e.g., from iterShapes).
  * Skips the shapeType() WASM call — only performs downcast + branded handle creation.