brepjs 18.118.26 → 18.118.28

package/dist/2d.cjs

@@ -1,11 +1,11 @@
 Object.defineProperty(exports, Symbol.toStringTag, { value: "Module" });
-const require_shapeTypes = require("./shapeTypes-DbUdKYv8.cjs");
+const require_shapeTypes = require("./shapeTypes-CIbdFdRS.cjs");
 const require_errors = require("./errors-CJU8CHng.cjs");
-const require_topologyQueryFns = require("./topologyQueryFns-D5hBmDkc.cjs");
-const require_blueprintSketcher = require("./blueprintSketcher-DEF16yRm.cjs");
-const require_blueprint = require("./blueprint-DAwKV0lS.cjs");
-const require_boolean2D = require("./boolean2D-CH06mcQA.cjs");
-const require_blueprintFns = require("./blueprintFns-OqfvE3cr.cjs");
+const require_topologyQueryFns = require("./topologyQueryFns-CYoIx1Vr.cjs");
+const require_blueprintSketcher = require("./blueprintSketcher-BSo04hhn.cjs");
+const require_blueprint = require("./blueprint-BwLFEcr6.cjs");
+const require_boolean2D = require("./boolean2D-HvEktvx_.cjs");
+const require_blueprintFns = require("./blueprintFns-dNGzyZoB.cjs");
 //#region src/core/curve2dHandle.ts
 /**
 * Wrap a raw kernel 2D curve handle with brand + disposal tracking.

package/dist/2d.js

@@ -1,10 +1,10 @@
-import { K as createKernelHandle, at as getKernel2D, c as createEdge } from "./shapeTypes-Cw-8_69M.js";
+import { K as createKernelHandle, at as getKernel2D, c as createEdge } from "./shapeTypes-DUGhC32A.js";
 import { O as ok, d as validationError, t as BrepErrorCode, v as err } from "./errors-B3CDG537.js";
-import { T as kernelCallRaw } from "./topologyQueryFns-BT4CdXa2.js";
-import { a as Blueprints, i as CompoundBlueprint, r as organiseBlueprints } from "./blueprintSketcher-DuhTWUAS.js";
-import { _ as Curve2D, t as Blueprint, y as BoundingBox2d } from "./blueprint-DlMt2gFV.js";
-import { a as fuseBlueprints, c as roundedRectangleBlueprint, i as cutBlueprints, n as fuse2D, o as intersectBlueprints, r as intersect2D, s as polysidesBlueprint, t as cut2D } from "./boolean2D-DFkUpxlE.js";
-import { S as reverseCurve, _ as curve2dIsOnCurve, a as isInside2D, b as curve2dSplitAt, c as scale2D, d as stretch2D, f as toSVGPathD, g as curve2dFirstPoint, h as curve2dDistanceFrom, i as getOrientation2D, l as sketchOnFace2D, m as curve2dBoundingBox, o as mirror2D, p as translate2D, r as getBounds2D, s as rotate2D, t as createBlueprint, u as sketchOnPlane2D, v as curve2dLastPoint, x as curve2dTangentAt, y as curve2dParameter } from "./blueprintFns-D2u7hGyU.js";
+import { T as kernelCallRaw } from "./topologyQueryFns-Dsmto2eL.js";
+import { a as Blueprints, i as CompoundBlueprint, r as organiseBlueprints } from "./blueprintSketcher-9hdFqAKq.js";
+import { _ as Curve2D, t as Blueprint, y as BoundingBox2d } from "./blueprint-CQCMv1dT.js";
+import { a as fuseBlueprints, c as roundedRectangleBlueprint, i as cutBlueprints, n as fuse2D, o as intersectBlueprints, r as intersect2D, s as polysidesBlueprint, t as cut2D } from "./boolean2D-hkBchHCX.js";
+import { S as reverseCurve, _ as curve2dIsOnCurve, a as isInside2D, b as curve2dSplitAt, c as scale2D, d as stretch2D, f as toSVGPathD, g as curve2dFirstPoint, h as curve2dDistanceFrom, i as getOrientation2D, l as sketchOnFace2D, m as curve2dBoundingBox, o as mirror2D, p as translate2D, r as getBounds2D, s as rotate2D, t as createBlueprint, u as sketchOnPlane2D, v as curve2dLastPoint, x as curve2dTangentAt, y as curve2dParameter } from "./blueprintFns-Dfw1xSJB.js";
 //#region src/core/curve2dHandle.ts
 /**
 * Wrap a raw kernel 2D curve handle with brand + disposal tracking.

package/dist/{adjacencyFns-sWRL_pkB.js → adjacencyFns-BkTS3Exp.js}

@@ -1,6 +1,6 @@
-import { it as getKernel, r as castResultShapeWithKnownType, rt as getActiveKernelId, t as borrowShapeWithKnownType } from "./shapeTypes-Cw-8_69M.js";
+import { it as getKernel, r as castResultShapeWithKnownType, rt as getActiveKernelId, t as borrowShapeWithKnownType } from "./shapeTypes-DUGhC32A.js";
 import { O as isUnsupportedKernelOperationError } from "./occtWasmAdapter-CYfezu3P.js";
-import { c as getFaces, f as getVertices, l as getOrCreateCache, s as getEdges } from "./topologyQueryFns-BT4CdXa2.js";
+import { c as getFaces, f as getVertices, l as getOrCreateCache, s as getEdges } from "./topologyQueryFns-Dsmto2eL.js";
 import { n as HASH_CODE_MAX } from "./constants-ITRzCnCp.js";
 //#region src/topology/adjacencyFns.ts
 /**

package/dist/{adjacencyFns-D3E5mqNS.cjs → adjacencyFns-einnpj1f.cjs}

@@ -1,6 +1,6 @@
-const require_shapeTypes = require("./shapeTypes-DbUdKYv8.cjs");
+const require_shapeTypes = require("./shapeTypes-CIbdFdRS.cjs");
 const require_occtWasmAdapter = require("./occtWasmAdapter-Hkzb95Fy.cjs");
-const require_topologyQueryFns = require("./topologyQueryFns-D5hBmDkc.cjs");
+const require_topologyQueryFns = require("./topologyQueryFns-CYoIx1Vr.cjs");
 const require_constants = require("./constants-BOVyEYGH.cjs");
 //#region src/topology/adjacencyFns.ts
 /**

package/dist/{blueprint-DAwKV0lS.cjs → blueprint-BwLFEcr6.cjs}

@@ -1,14 +1,14 @@
-const require_shapeTypes = require("./shapeTypes-DbUdKYv8.cjs");
+const require_shapeTypes = require("./shapeTypes-CIbdFdRS.cjs");
 const require_bug = require("./bug-O02CsAmt.cjs");
 const require_errors = require("./errors-CJU8CHng.cjs");
 const require_constants = require("./constants-BOVyEYGH.cjs");
 const require_types = require("./types-KjA8tY4Y.cjs");
 const require_planeOps = require("./planeOps-Cr25KWWA.cjs");
-const require_faceFns = require("./faceFns-B4X-xM8V.cjs");
-const require_curveFns = require("./curveFns-CLG5eRx5.cjs");
+const require_faceFns = require("./faceFns-5_JXMBDb.cjs");
+const require_curveFns = require("./curveFns-CRs4VDhr.cjs");
 const require_arrayAccess = require("./arrayAccess-e4H9cBfh.cjs");
-const require_surfaceBuilders = require("./surfaceBuilders-QPtrtoXG.cjs");
-const require_helpers = require("./helpers-4pH_jO62.cjs");
+const require_surfaceBuilders = require("./surfaceBuilders-DOFKdphI.cjs");
+const require_helpers = require("./helpers-CPSIFLtb.cjs");
 //#region src/2d/lib/definitions.ts
 /** Type guard that checks whether a value is a `Point2D`. */
 function isPoint2D(point) {

package/dist/{blueprint-DlMt2gFV.js → blueprint-CQCMv1dT.js}

@@ -1,14 +1,14 @@
-import { Y as registerForCleanup, Z as unregisterFromCleanup, at as getKernel2D, c as createEdge, it as getKernel, p as createWire } from "./shapeTypes-Cw-8_69M.js";
+import { Y as registerForCleanup, Z as unregisterFromCleanup, at as getKernel2D, c as createEdge, it as getKernel, p as createWire } from "./shapeTypes-DUGhC32A.js";
 import { i as wasmIndex, n as bug } from "./bug-BdOHwn_e.js";
 import { I as unwrap, O as ok, d as validationError, n as computationError, v as err } from "./errors-B3CDG537.js";
 import { r as RAD2DEG, t as DEG2RAD } from "./constants-ITRzCnCp.js";
 import { r as toVec3 } from "./types-D24Y27N0.js";
 import { r as makePlane } from "./planeOps-Cp6GQ23-.js";
-import { _ as cast, h as uvCoordinates, i as faceGeomType, m as uvBounds, r as faceCenter } from "./faceFns-Bk5OdHMb.js";
-import { p as getOrientation } from "./curveFns-Sl36NbVb.js";
+import { _ as cast, h as uvCoordinates, i as faceGeomType, m as uvBounds, r as faceCenter } from "./faceFns-C0IqnONT.js";
+import { p as getOrientation } from "./curveFns-DSouEUKA.js";
 import { n as getAtOrThrow, r as lastOrThrow, t as firstOrThrow } from "./arrayAccess-DrUGPADn.js";
-import { r as makeFace } from "./surfaceBuilders-DI0oXs1Z.js";
-import { _ as samePoint, b as subtract2d, l as add2d, o as normalize2d, p as distance2d, t as getSingleFace, v as scalarMultiply2d } from "./helpers-QKQZ-Fr6.js";
+import { r as makeFace } from "./surfaceBuilders-PnbuNC6X.js";
+import { _ as samePoint, b as subtract2d, l as add2d, o as normalize2d, p as distance2d, t as getSingleFace, v as scalarMultiply2d } from "./helpers-D2e6tjMb.js";
 //#region src/2d/lib/definitions.ts
 /** Type guard that checks whether a value is a `Point2D`. */
 function isPoint2D(point) {

package/dist/{blueprintFns-D2u7hGyU.js → blueprintFns-Dfw1xSJB.js}

@@ -1,6 +1,6 @@
 import { O as ok, d as validationError, t as BrepErrorCode, v as err } from "./errors-B3CDG537.js";
-import { i as CompoundBlueprint } from "./blueprintSketcher-DuhTWUAS.js";
-import { t as Blueprint } from "./blueprint-DlMt2gFV.js";
+import { i as CompoundBlueprint } from "./blueprintSketcher-9hdFqAKq.js";
+import { t as Blueprint } from "./blueprint-CQCMv1dT.js";
 //#region src/2d/lib/curve2dFns.ts
 /**
 * Return a reversed copy of the curve (non-mutating).

package/dist/{blueprintFns-OqfvE3cr.cjs → blueprintFns-dNGzyZoB.cjs}

@@ -1,6 +1,6 @@
 const require_errors = require("./errors-CJU8CHng.cjs");
-const require_blueprintSketcher = require("./blueprintSketcher-DEF16yRm.cjs");
-const require_blueprint = require("./blueprint-DAwKV0lS.cjs");
+const require_blueprintSketcher = require("./blueprintSketcher-BSo04hhn.cjs");
+const require_blueprint = require("./blueprint-BwLFEcr6.cjs");
 //#region src/2d/lib/curve2dFns.ts
 /**
 * Return a reversed copy of the curve (non-mutating).

package/dist/{blueprintSketcher-DuhTWUAS.js → blueprintSketcher-9hdFqAKq.js}

@@ -1,10 +1,10 @@
-import { at as getKernel2D, it as getKernel } from "./shapeTypes-Cw-8_69M.js";
+import { at as getKernel2D, it as getKernel } from "./shapeTypes-DUGhC32A.js";
 import { i as wasmIndex, n as bug } from "./bug-BdOHwn_e.js";
 import { C as isOk, I as unwrap, O as ok, n as computationError, s as safeIndex, v as err } from "./errors-B3CDG537.js";
 import { r as RAD2DEG, t as DEG2RAD } from "./constants-ITRzCnCp.js";
 import { t as firstOrThrow } from "./arrayAccess-DrUGPADn.js";
-import { _ as samePoint, b as subtract2d, d as cartesianToPolar, f as crossProduct2d, g as rotate2d, h as polarToCartesian, l as add2d, m as polarAngle2d, o as normalize2d, p as distance2d, v as scalarMultiply2d } from "./helpers-QKQZ-Fr6.js";
-import { _ as Curve2D, c as make2dCircle, f as make2dSegmentCurve, h as approximateAsBSpline, m as make2dThreePointArc, n as asSVG, o as make2dArcFromCenter, p as make2dTangentArc, r as viewbox, s as make2dBezierCurve, t as Blueprint, u as make2dEllipseArc, x as isPoint2D, y as BoundingBox2d } from "./blueprint-DlMt2gFV.js";
+import { _ as samePoint, b as subtract2d, d as cartesianToPolar, f as crossProduct2d, g as rotate2d, h as polarToCartesian, l as add2d, m as polarAngle2d, o as normalize2d, p as distance2d, v as scalarMultiply2d } from "./helpers-D2e6tjMb.js";
+import { _ as Curve2D, c as make2dCircle, f as make2dSegmentCurve, h as approximateAsBSpline, m as make2dThreePointArc, n as asSVG, o as make2dArcFromCenter, p as make2dTangentArc, r as viewbox, s as make2dBezierCurve, t as Blueprint, u as make2dEllipseArc, x as isPoint2D, y as BoundingBox2d } from "./blueprint-CQCMv1dT.js";
 //#region node_modules/flatqueue/index.js
 /**
 * @typedef {Float64ArrayConstructor | Float32ArrayConstructor |

package/dist/{blueprintSketcher-DEF16yRm.cjs → blueprintSketcher-BSo04hhn.cjs}

@@ -1,10 +1,10 @@
-const require_shapeTypes = require("./shapeTypes-DbUdKYv8.cjs");
+const require_shapeTypes = require("./shapeTypes-CIbdFdRS.cjs");
 const require_bug = require("./bug-O02CsAmt.cjs");
 const require_errors = require("./errors-CJU8CHng.cjs");
 const require_constants = require("./constants-BOVyEYGH.cjs");
 const require_arrayAccess = require("./arrayAccess-e4H9cBfh.cjs");
-const require_helpers = require("./helpers-4pH_jO62.cjs");
-const require_blueprint = require("./blueprint-DAwKV0lS.cjs");
+const require_helpers = require("./helpers-CPSIFLtb.cjs");
+const require_blueprint = require("./blueprint-BwLFEcr6.cjs");
 //#region node_modules/flatqueue/index.js
 /**
 * @typedef {Float64ArrayConstructor | Float32ArrayConstructor |

package/dist/{boolean2D-CH06mcQA.cjs → boolean2D-HvEktvx_.cjs}

@@ -1,10 +1,10 @@
 const require_bug = require("./bug-O02CsAmt.cjs");
 const require_errors = require("./errors-CJU8CHng.cjs");
 const require_arrayAccess = require("./arrayAccess-e4H9cBfh.cjs");
-const require_surfaceBuilders = require("./surfaceBuilders-QPtrtoXG.cjs");
-const require_blueprintSketcher = require("./blueprintSketcher-DEF16yRm.cjs");
-const require_helpers = require("./helpers-4pH_jO62.cjs");
-const require_blueprint = require("./blueprint-DAwKV0lS.cjs");
+const require_surfaceBuilders = require("./surfaceBuilders-DOFKdphI.cjs");
+const require_blueprintSketcher = require("./blueprintSketcher-BSo04hhn.cjs");
+const require_helpers = require("./helpers-CPSIFLtb.cjs");
+const require_blueprint = require("./blueprint-BwLFEcr6.cjs");
 //#region src/2d/blueprints/cannedBlueprints.ts
 /**
 * Create a regular polygon blueprint inscribed in a circle of the given radius.

package/dist/{boolean2D-DFkUpxlE.js → boolean2D-hkBchHCX.js}

@@ -1,10 +1,10 @@
 import { i as wasmIndex, n as bug } from "./bug-BdOHwn_e.js";
 import { I as unwrap, s as safeIndex } from "./errors-B3CDG537.js";
 import { r as lastOrThrow } from "./arrayAccess-DrUGPADn.js";
-import { v as zip } from "./surfaceBuilders-DI0oXs1Z.js";
-import { a as Blueprints, i as CompoundBlueprint, l as intersectCurves, r as organiseBlueprints, t as BlueprintSketcher, u as Flatbush } from "./blueprintSketcher-DuhTWUAS.js";
-import { _ as samePoint$1, b as subtract2d, f as crossProduct2d, s as PRECISION_INTERSECTION } from "./helpers-QKQZ-Fr6.js";
-import { b as removeDuplicatePoints, f as make2dSegmentCurve, t as Blueprint } from "./blueprint-DlMt2gFV.js";
+import { v as zip } from "./surfaceBuilders-PnbuNC6X.js";
+import { a as Blueprints, i as CompoundBlueprint, l as intersectCurves, r as organiseBlueprints, t as BlueprintSketcher, u as Flatbush } from "./blueprintSketcher-9hdFqAKq.js";
+import { _ as samePoint$1, b as subtract2d, f as crossProduct2d, s as PRECISION_INTERSECTION } from "./helpers-D2e6tjMb.js";
+import { b as removeDuplicatePoints, f as make2dSegmentCurve, t as Blueprint } from "./blueprint-CQCMv1dT.js";
 //#region src/2d/blueprints/cannedBlueprints.ts
 /**
 * Create a regular polygon blueprint inscribed in a circle of the given radius.

package/dist/brepjs.cjs

@@ -1,38 +1,38 @@
 Object.defineProperty(exports, Symbol.toStringTag, { value: "Module" });
-const require_textBlueprints = require("./textBlueprints-DbbfJcHz.cjs");
-const require_shapeTypes = require("./shapeTypes-DbUdKYv8.cjs");
+const require_textBlueprints = require("./textBlueprints-DKmwMA8f.cjs");
+const require_shapeTypes = require("./shapeTypes-CIbdFdRS.cjs");
 const require_occtWasmAdapter = require("./occtWasmAdapter-Hkzb95Fy.cjs");
 const require_bug = require("./bug-O02CsAmt.cjs");
 const require_errors = require("./errors-CJU8CHng.cjs");
-const require_topologyQueryFns = require("./topologyQueryFns-D5hBmDkc.cjs");
+const require_topologyQueryFns = require("./topologyQueryFns-CYoIx1Vr.cjs");
 const require_constants = require("./constants-BOVyEYGH.cjs");
 const require_types = require("./types-KjA8tY4Y.cjs");
 const require_vecOps = require("./vecOps-CCnJt-yH.cjs");
 const require_planeOps = require("./planeOps-Cr25KWWA.cjs");
-const require_faceFns = require("./faceFns-B4X-xM8V.cjs");
-const require_shapeFns = require("./shapeFns-DdPt7PBo.cjs");
-const require_curveFns = require("./curveFns-CLG5eRx5.cjs");
-const require_meshFns = require("./meshFns-CU9e6jLy.cjs");
+const require_faceFns = require("./faceFns-5_JXMBDb.cjs");
+const require_shapeFns = require("./shapeFns-BZu0MAZ5.cjs");
+const require_curveFns = require("./curveFns-CRs4VDhr.cjs");
+const require_meshFns = require("./meshFns-C7DDfJw0.cjs");
 const require_arrayAccess = require("./arrayAccess-e4H9cBfh.cjs");
-const require_surfaceBuilders = require("./surfaceBuilders-QPtrtoXG.cjs");
-const require_solidBuilders = require("./solidBuilders-CkaFAwJO.cjs");
-const require_healingFns = require("./healingFns-BYZJ0EaJ.cjs");
-const require_threadFns = require("./threadFns-D7OuY55w.cjs");
-const require_blueprintSketcher = require("./blueprintSketcher-DEF16yRm.cjs");
-const require_helpers = require("./helpers-4pH_jO62.cjs");
-const require_drawFns = require("./drawFns-BOTtZqQ1.cjs");
-const require_measureFns = require("./measureFns-Vb49femb.cjs");
-const require_cornerFinder = require("./cornerFinder-Bvb8bDUP.cjs");
-const require_boolean2D = require("./boolean2D-CH06mcQA.cjs");
-const require_blueprintFns = require("./blueprintFns-OqfvE3cr.cjs");
-const require_importFns = require("./importFns-D7XWumNL.cjs");
-const require_loftFns = require("./loftFns-DjHxcgNY.cjs");
-const require_cameraFns = require("./cameraFns-B2a5MCUi.cjs");
-const require_textMetrics = require("./textMetrics-CZOWFKEi.cjs");
-const require_adjacencyFns = require("./adjacencyFns-D3E5mqNS.cjs");
-const require_refResolveFns = require("./refResolveFns-CnpEu9L-.cjs");
+const require_surfaceBuilders = require("./surfaceBuilders-DOFKdphI.cjs");
+const require_solidBuilders = require("./solidBuilders-CmZoQG9B.cjs");
+const require_healingFns = require("./healingFns-l6bwWSeW.cjs");
+const require_threadFns = require("./threadFns-82vx0u7T.cjs");
+const require_blueprintSketcher = require("./blueprintSketcher-BSo04hhn.cjs");
+const require_helpers = require("./helpers-CPSIFLtb.cjs");
+const require_drawFns = require("./drawFns-DOY9mr5Z.cjs");
+const require_measureFns = require("./measureFns-fWkCTxyQ.cjs");
+const require_cornerFinder = require("./cornerFinder-2ET6TfY3.cjs");
+const require_boolean2D = require("./boolean2D-HvEktvx_.cjs");
+const require_blueprintFns = require("./blueprintFns-dNGzyZoB.cjs");
+const require_importFns = require("./importFns-Bd3Gbhns.cjs");
+const require_loftFns = require("./loftFns-Imv8iEGt.cjs");
+const require_cameraFns = require("./cameraFns-BWgU6410.cjs");
+const require_textMetrics = require("./textMetrics-DnsFQg5k.cjs");
+const require_adjacencyFns = require("./adjacencyFns-einnpj1f.cjs");
+const require_refResolveFns = require("./refResolveFns-B_iE18HK.cjs");
 const require_workerPool = require("./workerPool-D30NsiIW.cjs");
-const require_primitiveFns = require("./primitiveFns-ChCWaUxm.cjs");
+const require_primitiveFns = require("./primitiveFns-K6hrkt3N.cjs");
 //#region src/topology/shapeBooleans.ts
 var BOPAlgo_GlueShift = 1;
 var BOPAlgo_GlueFull = 2;
@@ -3041,7 +3041,9 @@ function sewMeshToSolid(triangles, errorCode, tolerance = 1e-6) {
 	}
 	if (triFaces.length === 0) return require_errors.err(require_errors.ioError(errorCode, "No valid triangular faces could be built"));
 	try {
-		return require_errors.ok(require_shapeTypes.castShape(kernel.sewAndSolidify(triFaces, tolerance)));
+		const cast = require_shapeTypes.castResultShape(kernel.sewAndSolidify(triFaces, tolerance));
+		for (const triFace of triFaces) kernel.dispose(triFace);
+		return require_errors.ok(cast);
 	} catch {
 		try {
 			return require_errors.ok(require_shapeTypes.castShape(kernel.sew(triFaces, tolerance)));
@@ -3352,7 +3354,7 @@ function buildSolidFromMesh(mesh) {
 	}));
 	const faces = mesh.triangles;
 	try {
-		return require_errors.ok(require_shapeTypes.castShape(kernel.buildSolidFromFaces(points, faces, 1e-6)));
+		return require_errors.ok(require_shapeTypes.castResultShape(kernel.buildSolidFromFaces(points, faces, 1e-6)));
 	} catch {
 		const triangles = [];
 		for (const [v1, v2, v3] of mesh.triangles) {
@@ -3424,7 +3426,7 @@ async function importThreeMF(blob) {
 async function importGLB(blob) {
 	try {
 		const data = await blob.arrayBuffer();
-		return require_errors.ok(require_shapeTypes.castShape(require_shapeTypes.getKernel().importGLB(data)));
+		return require_errors.ok(require_shapeTypes.castResultShape(require_shapeTypes.getKernel().importGLB(data)));
 	} catch (e) {
 		const msg = e instanceof Error ? e.message : String(e);
 		return require_errors.err(require_errors.ioError(require_errors.BrepErrorCode.GLB_IMPORT_FAILED, `Failed to import GLB: ${msg}`, e));

package/dist/brepjs.js

@@ -1,37 +1,37 @@
-import { $ as withScope, A as isPlanarFace, B as as2D, C as isSolid, Ct as qualityDeflection, D as isClosedWire, E as closedWire, F as planarFace, G as createHandle, H as is2D, I as planarWire, J as isLive, K as createKernelHandle, L as validSolid, M as isValidSolid, N as manifoldShell, O as isManifoldShell, P as orientedFace, Q as withArenaCheckpoint, R as getShapeKind, S as isShell, St as currentQuality, T as isWire, U as is3D, V as as3D, W as DisposalScope, X as resetDisposalStats, _ as isCompound, _t as supportsConstraintSketch, a as castShape3D, b as isShape1D, bt as getPerformanceStats, c as createEdge, ct as init, d as createSolid, dt as prewarm, et as withScopeResult, f as createVertex, ft as registerKernel, gt as withTier, h as disposeResultShape, ht as withQuality, i as castShape, it as getKernel, j as isPlanarWire, k as isOrientedFace, l as createFace, lt as initFromManifold, mt as withKernel, n as castResultShape, nt as _usingCtx, ot as getKernelCapabilities, p as createWire, pt as registerKernelTier, q as getDisposalStats, rt as getActiveKernelId, s as createCompound, st as getKernelTier, tt as withScopeResultAsync, u as createShell, ut as initFromOC, v as isEdge, vt as supportsProjection, w as isVertex, x as isShape3D, xt as resetPerformanceStats, y as isFace, yt as BrepkitAdapter } from "./shapeTypes-Cw-8_69M.js";
+import { $ as withScope, A as isPlanarFace, B as as2D, C as isSolid, Ct as qualityDeflection, D as isClosedWire, E as closedWire, F as planarFace, G as createHandle, H as is2D, I as planarWire, J as isLive, K as createKernelHandle, L as validSolid, M as isValidSolid, N as manifoldShell, O as isManifoldShell, P as orientedFace, Q as withArenaCheckpoint, R as getShapeKind, S as isShell, St as currentQuality, T as isWire, U as is3D, V as as3D, W as DisposalScope, X as resetDisposalStats, _ as isCompound, _t as supportsConstraintSketch, a as castShape3D, b as isShape1D, bt as getPerformanceStats, c as createEdge, ct as init, d as createSolid, dt as prewarm, et as withScopeResult, f as createVertex, ft as registerKernel, gt as withTier, h as disposeResultShape, ht as withQuality, i as castShape, it as getKernel, j as isPlanarWire, k as isOrientedFace, l as createFace, lt as initFromManifold, mt as withKernel, n as castResultShape, nt as _usingCtx, ot as getKernelCapabilities, p as createWire, pt as registerKernelTier, q as getDisposalStats, rt as getActiveKernelId, s as createCompound, st as getKernelTier, tt as withScopeResultAsync, u as createShell, ut as initFromOC, v as isEdge, vt as supportsProjection, w as isVertex, x as isShape3D, xt as resetPerformanceStats, y as isFace, yt as BrepkitAdapter } from "./shapeTypes-DUGhC32A.js";
 import { A as EXACT_BREP_CAPABILITIES, k as DEFAULT_CAPABILITIES, t as OcctWasmAdapter } from "./occtWasmAdapter-CYfezu3P.js";
 import { i as wasmIndex, n as bug, t as BrepBugError } from "./bug-BdOHwn_e.js";
 import { A as orElse, B as zip, C as isOk, D as match, E as mapErr, F as tryCatchAsync, I as unwrap, L as unwrapErr, M as tap, N as tapErr, O as ok, P as tryCatch, R as unwrapOr, S as isErr, T as mapBoth, _ as collect, a as moduleInitError, b as flatten, c as sketcherStateError, d as validationError, g as andThen, h as all, i as kernelError, j as pipeline, k as or, l as typeCastError, m as OK, n as computationError, o as queryError, r as ioError, t as BrepErrorCode, u as unsupportedError, v as err, w as map, x as fromNullable, y as flatMap, z as unwrapOrElse } from "./errors-B3CDG537.js";
-import { C as vertexPosition, E as kernelCallScoped, T as kernelCallRaw, _ as iterFaces, a as getCachedSurfaceType, b as iterVertices, c as getFaces, d as getSolids, f as getVertices, g as iterEdges, h as iterCompSolids, m as invalidateShapeCache, n as getBounds, o as getCompSolids, p as getWires, s as getEdges, t as describe$1, u as getShells, v as iterShells, w as kernelCall, x as iterWires, y as iterSolids } from "./topologyQueryFns-BT4CdXa2.js";
+import { C as vertexPosition, E as kernelCallScoped, T as kernelCallRaw, _ as iterFaces, a as getCachedSurfaceType, b as iterVertices, c as getFaces, d as getSolids, f as getVertices, g as iterEdges, h as iterCompSolids, m as invalidateShapeCache, n as getBounds, o as getCompSolids, p as getWires, s as getEdges, t as describe$1, u as getShells, v as iterShells, w as kernelCall, x as iterWires, y as iterSolids } from "./topologyQueryFns-Dsmto2eL.js";
 import { n as HASH_CODE_MAX, r as RAD2DEG, t as DEG2RAD } from "./constants-ITRzCnCp.js";
 import { n as toVec2, r as toVec3, t as resolveDirection } from "./types-D24Y27N0.js";
 import { a as vecDot, c as vecLength, d as vecNormalize, f as vecProjectToPlane, g as vecSub, h as vecScale, i as vecDistance, l as vecLengthSq, m as vecRotate, n as vecAngle, o as vecEquals, p as vecRepr, r as vecCross, s as vecIsZero, t as vecAdd, u as vecNegate } from "./vecOps-SKPRvPH-.js";
 import { i as pivotPlane, n as createPlane, o as resolvePlane, r as makePlane, s as translatePlane, t as createNamedPlane } from "./planeOps-Cp6GQ23-.js";
-import { C as shapeType, S as iterTopo, _ as cast, a as faceOrientation, b as fromBREP, c as innerWires, d as pointOnSurface, f as projectPointOnFace, g as asTopo, h as uvCoordinates, i as faceGeomType, l as normalAt, m as uvBounds, n as faceAxis, o as flipFaceOrientation, p as removeHolesFromFace, r as faceCenter, s as getSurfaceType, t as classifyPointOnFace, u as outerWire, x as isCompSolid, y as downcast } from "./faceFns-Bk5OdHMb.js";
-import { A as tagFaces, C as colorShape, D as getFaceTags, E as findFacesByTag, M as setShapeOrigin, O as getTagMetadata, S as colorFaces, T as getShapeColor, a as isSameShape, c as applyMatrix$1, d as mirror$2, f as resize, g as translate$2, h as transformCopy$1, i as isEqualShape, j as getFaceOrigins, k as setTagMetadata, l as composeTransforms, m as scale$3, n as getHashCode, o as simplify$1, p as rotate$2, r as isEmpty$2, s as toBREP$1, t as clone$1, u as locate$1, v as hasAnyMetadata, w as getFaceColor, x as propagateMetadataThroughRelocation } from "./shapeFns-DdmglyM8.js";
-import { a as curveIsPeriodic, c as curvePointAt, d as flipOrientation, f as getCurveType, h as offsetWire2D, i as curveIsClosed, l as curveStartPoint, m as interpolateCurve, n as curveAxis, o as curveLength, p as getOrientation, r as curveEndPoint, s as curvePeriod, t as approximateCurve, u as curveTangentAt } from "./curveFns-Sl36NbVb.js";
-import { a as meshEdges$1, c as meshMultiLOD, d as createMeshCache, i as mesh$1, l as buildMeshCacheKey, n as exportSTEP, o as meshLODs, r as exportSTL, s as meshLODsProgressive, t as exportIGES, u as clearMeshCache } from "./meshFns-BGoepe1y.js";
+import { C as shapeType, S as iterTopo, _ as cast, a as faceOrientation, b as fromBREP, c as innerWires, d as pointOnSurface, f as projectPointOnFace, g as asTopo, h as uvCoordinates, i as faceGeomType, l as normalAt, m as uvBounds, n as faceAxis, o as flipFaceOrientation, p as removeHolesFromFace, r as faceCenter, s as getSurfaceType, t as classifyPointOnFace, u as outerWire, x as isCompSolid, y as downcast } from "./faceFns-C0IqnONT.js";
+import { A as tagFaces, C as colorShape, D as getFaceTags, E as findFacesByTag, M as setShapeOrigin, O as getTagMetadata, S as colorFaces, T as getShapeColor, a as isSameShape, c as applyMatrix$1, d as mirror$2, f as resize, g as translate$2, h as transformCopy$1, i as isEqualShape, j as getFaceOrigins, k as setTagMetadata, l as composeTransforms, m as scale$3, n as getHashCode, o as simplify$1, p as rotate$2, r as isEmpty$2, s as toBREP$1, t as clone$1, u as locate$1, v as hasAnyMetadata, w as getFaceColor, x as propagateMetadataThroughRelocation } from "./shapeFns-tTkC3Ry7.js";
+import { a as curveIsPeriodic, c as curvePointAt, d as flipOrientation, f as getCurveType, h as offsetWire2D, i as curveIsClosed, l as curveStartPoint, m as interpolateCurve, n as curveAxis, o as curveLength, p as getOrientation, r as curveEndPoint, s as curvePeriod, t as approximateCurve, u as curveTangentAt } from "./curveFns-DSouEUKA.js";
+import { a as meshEdges$1, c as meshMultiLOD, d as createMeshCache, i as mesh$1, l as buildMeshCacheKey, n as exportSTEP, o as meshLODs, r as exportSTL, s as meshLODsProgressive, t as exportIGES, u as clearMeshCache } from "./meshFns-BwMrdyFV.js";
 import { n as getAtOrThrow, r as lastOrThrow, t as firstOrThrow } from "./arrayAccess-DrUGPADn.js";
-import { _ as makeThreePointArc, d as makeCircle, h as makeLine, l as makeBSplineInterpolation, n as fill, r as makeFace, s as assembleWire } from "./surfaceBuilders-DI0oXs1Z.js";
-import { _ as section$1, b as split$1, d as booleanPipeline, f as cut$2, g as intersect$2, h as fuseAll$2, m as fuse$2, p as cutAll$2, r as makeCylinder, t as makeCompound, v as sectionToFace$1, y as slice$1 } from "./solidBuilders-BFKogU6o.js";
-import { A as toBufferGeometryData, C as shellWithEvolution, D as getNurbsCurveData, E as fuseAllBisect, M as toLODGeometryData, N as toLODGeometryLevels, O as getNurbsSurfaceData, P as toLineGeometryData, S as intersectWithEvolution, T as cutAllBisect, _ as positionOnCurve, a as healFace, b as filletWithEvolution, c as isValid$1, d as draft$1, f as fillet$1, g as variableFillet, h as thicken$1, i as heal$1, j as toGroupedBufferGeometryData, k as chamferDistAngle, l as solidFromShell, m as shell$1, n as fixSelfIntersection, o as healSolid, p as offset$1, r as fixShape, s as healWire, t as autoHeal, u as chamfer$1, v as chamferWithEvolution, w as checkBoolean, x as fuseWithEvolution, y as cutWithEvolution } from "./healingFns-DpSVPoyt.js";
-import { A as setJointValue, B as createAssemblyNode, C as cylindricalJoint, D as planarJoint, E as mechanismDOF, F as quatMultiply, G as circularPattern, H as removeChild, I as quatRotate, J as exportAssemblySTEP, K as gridPattern, L as addChild, M as sphericalJoint, N as quatFromAxisAngle, O as prismaticJoint, P as quatFromTo, R as collectShapes, S as addJoint, T as jointTransform, U as updateNode, V as findNode, W as walkAssembly, Y as createAssembly, _ as exportURDF, a as deserializeHistory, b as inverseKinematics, c as modifyStep, d as replayFrom, f as replayHistory, g as undoLast, h as stepsFrom, i as createRegistry, j as setJointValues, k as revoluteJoint, l as registerOperation, m as stepCount, n as addStep, o as findStep, p as serializeHistory, q as linearPattern, r as createHistory, s as getShape, t as thread, u as registerShape, v as importURDF, w as forwardKinematics, x as jointTrajectory, y as jointsFromDH, z as countNodes } from "./threadFns-D-YciBWU.js";
-import { n as BaseSketcher2d, r as organiseBlueprints, t as BlueprintSketcher } from "./blueprintSketcher-DuhTWUAS.js";
-import { a as createTypedFinder, i as wireFinder, n as edgeFinder, r as faceFinder, t as getSingleFace } from "./helpers-QKQZ-Fr6.js";
-import { A as sketchEllipse, D as makeBaseBox, E as deserializeDrawing, F as sketchRectangle, I as sketchRoundedRectangle, L as FaceSketcher, M as sketchHelix, N as sketchParametricFunction, O as polysideInnerRadius, P as sketchPolysides, R as Sketcher, S as drawText, _ as drawPolysides, a as drawingIntersect, b as drawSingleCircle, c as rotateDrawing, d as drawFaceOutline, f as drawProjection, g as drawPointsInterpolation, h as drawParametricFunction, i as drawingFuse, j as sketchFaceOffset, k as sketchCircle, l as scaleDrawing, m as drawEllipse, n as drawingCut, o as drawingToSketchOnPlane, p as drawCircle, r as drawingFillet, s as mirrorDrawing, t as drawingChamfer, u as translateDrawing, v as drawRectangle, w as draw, x as drawSingleEllipse, y as drawRoundedRectangle } from "./drawFns-DXQGzZpq.js";
-import { a as measureDistance, c as measureLinearProps, d as measureVolumeProps, i as measureCurvatureAtMid, l as measureSurfaceProps, n as measureArea, o as measureDistanceProps, r as measureCurvatureAt, s as measureLength, t as createDistanceQuery, u as measureVolume } from "./measureFns-Dy4ebDq2.js";
-import { t as cornerFinder } from "./cornerFinder-C4ZgQKf7.js";
-import { a as fuseBlueprints, c as roundedRectangleBlueprint, i as cutBlueprints, n as fuse2D, o as intersectBlueprints, r as intersect2D, s as polysidesBlueprint, t as cut2D } from "./boolean2D-DFkUpxlE.js";
-import { S as reverseCurve, _ as curve2dIsOnCurve, a as isInside2D, b as curve2dSplitAt, c as scale2D, d as stretch2D, f as toSVGPathD, g as curve2dFirstPoint, h as curve2dDistanceFrom, i as getOrientation2D, l as sketchOnFace2D, m as curve2dBoundingBox, n as createCompoundBlueprint, o as mirror2D, p as translate2D, r as getBounds2D, s as rotate2D, t as createBlueprint, u as sketchOnPlane2D, v as curve2dLastPoint, x as curve2dTangentAt, y as curve2dParameter } from "./blueprintFns-D2u7hGyU.js";
-import { a as importSVG, c as blueprintToDXF, d as exportGltf, f as exportOBJ, i as exportSTEPConfigured, l as exportDXF, n as importSTEP, o as importSVGPathD, r as importSTL, s as exportThreeMF, t as importIGES, u as exportGlb } from "./importFns-Bdl9AfTY.js";
-import { a as revolve$1, c as multiSectionSweep, d as twistExtrude, i as extrudeAll, l as supportExtrude, n as loftAll, o as complexExtrude, r as extrude$1, s as guidedSweep, t as loft$1, u as sweep$1 } from "./loftFns-RdVrGF1B.js";
-import { a as Sketch, c as compoundSketchLoft, d as sketchFace, f as sketchLoft, h as sketchWires, i as Sketches, l as compoundSketchRevolve, m as sketchSweep, n as getFont, o as compoundSketchExtrude, p as sketchRevolve, r as loadFont, s as compoundSketchFace, t as textBlueprints, u as sketchExtrude, v as CompoundSketch } from "./textBlueprints-B7Fqp2Hl.js";
-import { a as makeProjectedEdges, i as projectEdges, n as cameraLookAt, r as createCamera, s as isProjectionPlane, t as cameraFromPlane } from "./cameraFns-B4_7AIw0.js";
-import { n as textMetrics, r as sketchText, t as fontMetrics } from "./textMetrics-CNRMSua2.js";
-import { a as facesOfVertex, c as verticesOfFace, i as facesOfEdge, l as wiresOfFace, n as adjacentFaces, o as sharedEdges, r as edgesOfFace, s as verticesOfEdge } from "./adjacencyFns-sWRL_pkB.js";
-import { _ as createRef, a as isVertexRef, b as defaultScorer, c as resolveRefParams, d as createVertexRef, f as resolveVertexRef, g as captureHint, h as assignRoles, i as isLineageRef, l as createDerivedFaceRef, m as resolveEdgeRef, n as isEdgeRef, o as resolveLineageRef, p as createEdgeRef, r as isFaceRef, s as resolveRefIn, t as isDerivedFaceRef, u as resolveDerivedFaceRef, v as resolveRef, y as updateRoles } from "./refResolveFns-Cq3PaeZd.js";
+import { _ as makeThreePointArc, d as makeCircle, h as makeLine, l as makeBSplineInterpolation, n as fill, r as makeFace, s as assembleWire } from "./surfaceBuilders-PnbuNC6X.js";
+import { _ as section$1, b as split$1, d as booleanPipeline, f as cut$2, g as intersect$2, h as fuseAll$2, m as fuse$2, p as cutAll$2, r as makeCylinder, t as makeCompound, v as sectionToFace$1, y as slice$1 } from "./solidBuilders-Du0AWYAo.js";
+import { A as toBufferGeometryData, C as shellWithEvolution, D as getNurbsCurveData, E as fuseAllBisect, M as toLODGeometryData, N as toLODGeometryLevels, O as getNurbsSurfaceData, P as toLineGeometryData, S as intersectWithEvolution, T as cutAllBisect, _ as positionOnCurve, a as healFace, b as filletWithEvolution, c as isValid$1, d as draft$1, f as fillet$1, g as variableFillet, h as thicken$1, i as heal$1, j as toGroupedBufferGeometryData, k as chamferDistAngle, l as solidFromShell, m as shell$1, n as fixSelfIntersection, o as healSolid, p as offset$1, r as fixShape, s as healWire, t as autoHeal, u as chamfer$1, v as chamferWithEvolution, w as checkBoolean, x as fuseWithEvolution, y as cutWithEvolution } from "./healingFns-CotWNIRj.js";
+import { A as setJointValue, B as createAssemblyNode, C as cylindricalJoint, D as planarJoint, E as mechanismDOF, F as quatMultiply, G as circularPattern, H as removeChild, I as quatRotate, J as exportAssemblySTEP, K as gridPattern, L as addChild, M as sphericalJoint, N as quatFromAxisAngle, O as prismaticJoint, P as quatFromTo, R as collectShapes, S as addJoint, T as jointTransform, U as updateNode, V as findNode, W as walkAssembly, Y as createAssembly, _ as exportURDF, a as deserializeHistory, b as inverseKinematics, c as modifyStep, d as replayFrom, f as replayHistory, g as undoLast, h as stepsFrom, i as createRegistry, j as setJointValues, k as revoluteJoint, l as registerOperation, m as stepCount, n as addStep, o as findStep, p as serializeHistory, q as linearPattern, r as createHistory, s as getShape, t as thread, u as registerShape, v as importURDF, w as forwardKinematics, x as jointTrajectory, y as jointsFromDH, z as countNodes } from "./threadFns-DohGvjbS.js";
+import { n as BaseSketcher2d, r as organiseBlueprints, t as BlueprintSketcher } from "./blueprintSketcher-9hdFqAKq.js";
+import { a as createTypedFinder, i as wireFinder, n as edgeFinder, r as faceFinder, t as getSingleFace } from "./helpers-D2e6tjMb.js";
+import { A as sketchEllipse, D as makeBaseBox, E as deserializeDrawing, F as sketchRectangle, I as sketchRoundedRectangle, L as FaceSketcher, M as sketchHelix, N as sketchParametricFunction, O as polysideInnerRadius, P as sketchPolysides, R as Sketcher, S as drawText, _ as drawPolysides, a as drawingIntersect, b as drawSingleCircle, c as rotateDrawing, d as drawFaceOutline, f as drawProjection, g as drawPointsInterpolation, h as drawParametricFunction, i as drawingFuse, j as sketchFaceOffset, k as sketchCircle, l as scaleDrawing, m as drawEllipse, n as drawingCut, o as drawingToSketchOnPlane, p as drawCircle, r as drawingFillet, s as mirrorDrawing, t as drawingChamfer, u as translateDrawing, v as drawRectangle, w as draw, x as drawSingleEllipse, y as drawRoundedRectangle } from "./drawFns-CDBjUHVb.js";
+import { a as measureDistance, c as measureLinearProps, d as measureVolumeProps, i as measureCurvatureAtMid, l as measureSurfaceProps, n as measureArea, o as measureDistanceProps, r as measureCurvatureAt, s as measureLength, t as createDistanceQuery, u as measureVolume } from "./measureFns-ByHzc8J2.js";
+import { t as cornerFinder } from "./cornerFinder-j6mm48kY.js";
+import { a as fuseBlueprints, c as roundedRectangleBlueprint, i as cutBlueprints, n as fuse2D, o as intersectBlueprints, r as intersect2D, s as polysidesBlueprint, t as cut2D } from "./boolean2D-hkBchHCX.js";
+import { S as reverseCurve, _ as curve2dIsOnCurve, a as isInside2D, b as curve2dSplitAt, c as scale2D, d as stretch2D, f as toSVGPathD, g as curve2dFirstPoint, h as curve2dDistanceFrom, i as getOrientation2D, l as sketchOnFace2D, m as curve2dBoundingBox, n as createCompoundBlueprint, o as mirror2D, p as translate2D, r as getBounds2D, s as rotate2D, t as createBlueprint, u as sketchOnPlane2D, v as curve2dLastPoint, x as curve2dTangentAt, y as curve2dParameter } from "./blueprintFns-Dfw1xSJB.js";
+import { a as importSVG, c as blueprintToDXF, d as exportGltf, f as exportOBJ, i as exportSTEPConfigured, l as exportDXF, n as importSTEP, o as importSVGPathD, r as importSTL, s as exportThreeMF, t as importIGES, u as exportGlb } from "./importFns-BogytVsi.js";
+import { a as revolve$1, c as multiSectionSweep, d as twistExtrude, i as extrudeAll, l as supportExtrude, n as loftAll, o as complexExtrude, r as extrude$1, s as guidedSweep, t as loft$1, u as sweep$1 } from "./loftFns-DPVVYGdV.js";
+import { a as Sketch, c as compoundSketchLoft, d as sketchFace, f as sketchLoft, h as sketchWires, i as Sketches, l as compoundSketchRevolve, m as sketchSweep, n as getFont, o as compoundSketchExtrude, p as sketchRevolve, r as loadFont, s as compoundSketchFace, t as textBlueprints, u as sketchExtrude, v as CompoundSketch } from "./textBlueprints-C7mPkR_V.js";
+import { a as makeProjectedEdges, i as projectEdges, n as cameraLookAt, r as createCamera, s as isProjectionPlane, t as cameraFromPlane } from "./cameraFns-tiRxjxGd.js";
+import { n as textMetrics, r as sketchText, t as fontMetrics } from "./textMetrics-BfcRSP3_.js";
+import { a as facesOfVertex, c as verticesOfFace, i as facesOfEdge, l as wiresOfFace, n as adjacentFaces, o as sharedEdges, r as edgesOfFace, s as verticesOfEdge } from "./adjacencyFns-BkTS3Exp.js";
+import { _ as createRef, a as isVertexRef, b as defaultScorer, c as resolveRefParams, d as createVertexRef, f as resolveVertexRef, g as captureHint, h as assignRoles, i as isLineageRef, l as createDerivedFaceRef, m as resolveEdgeRef, n as isEdgeRef, o as resolveLineageRef, p as createEdgeRef, r as isFaceRef, s as resolveRefIn, t as isDerivedFaceRef, u as resolveDerivedFaceRef, v as resolveRef, y as updateRoles } from "./refResolveFns-BOiwaoR6.js";
 import { _ as isSuccessResponse, a as createWorkerClient, c as enqueueTask, d as rejectAll, f as isBatchRequest, g as isOperationRequest, h as isInitRequest, i as registerHandler, l as isEmpty$1, m as isErrorResponse, n as createOperationRegistry, o as createTaskQueue, p as isDisposeRequest, r as createWorkerHandler, s as dequeueTask, t as createWorkerPool, u as pendingCount } from "./workerPool-XcYX2UZ0.js";
-import { C as threePointArc, D as wireLoop, E as wire, S as tangentArc, T as vertex, _ as polygon, a as circle, b as sphere$1, c as cylinder, d as ellipsoid, f as face, g as offsetFace, h as line, i as bsplineApprox, l as ellipse, m as helix, n as bezier, o as compound, p as filledFace, r as box, s as cone, t as addHoles, u as ellipseArc, v as sewShells, w as torus$1, x as subFace, y as solid } from "./primitiveFns-Cjh7Me8u.js";
+import { C as threePointArc, D as wireLoop, E as wire, S as tangentArc, T as vertex, _ as polygon, a as circle, b as sphere$1, c as cylinder, d as ellipsoid, f as face, g as offsetFace, h as line, i as bsplineApprox, l as ellipse, m as helix, n as bezier, o as compound, p as filledFace, r as box, s as cone, t as addHoles, u as ellipseArc, v as sewShells, w as torus$1, x as subFace, y as solid } from "./primitiveFns-CFsKqdgs.js";
 //#region \0rolldown/runtime.js
 var __defProp = Object.defineProperty;
 var __exportAll = (all, no_symbols) => {
@@ -3052,7 +3052,9 @@ function sewMeshToSolid(triangles, errorCode, tolerance = 1e-6) {
 	}
 	if (triFaces.length === 0) return err(ioError(errorCode, "No valid triangular faces could be built"));
 	try {
-		return ok(castShape(kernel.sewAndSolidify(triFaces, tolerance)));
+		const cast = castResultShape(kernel.sewAndSolidify(triFaces, tolerance));
+		for (const triFace of triFaces) kernel.dispose(triFace);
+		return ok(cast);
 	} catch {
 		try {
 			return ok(castShape(kernel.sew(triFaces, tolerance)));
@@ -3363,7 +3365,7 @@ function buildSolidFromMesh(mesh) {
 	}));
 	const faces = mesh.triangles;
 	try {
-		return ok(castShape(kernel.buildSolidFromFaces(points, faces, 1e-6)));
+		return ok(castResultShape(kernel.buildSolidFromFaces(points, faces, 1e-6)));
 	} catch {
 		const triangles = [];
 		for (const [v1, v2, v3] of mesh.triangles) {
@@ -3435,7 +3437,7 @@ async function importThreeMF(blob) {
 async function importGLB(blob) {
 	try {
 		const data = await blob.arrayBuffer();
-		return ok(castShape(getKernel().importGLB(data)));
+		return ok(castResultShape(getKernel().importGLB(data)));
 	} catch (e) {
 		const msg = e instanceof Error ? e.message : String(e);
 		return err(ioError(BrepErrorCode.GLB_IMPORT_FAILED, `Failed to import GLB: ${msg}`, e));

package/dist/{cameraFns-B2a5MCUi.cjs → cameraFns-BWgU6410.cjs}

@@ -1,8 +1,8 @@
-const require_shapeTypes = require("./shapeTypes-DbUdKYv8.cjs");
+const require_shapeTypes = require("./shapeTypes-CIbdFdRS.cjs");
 const require_errors = require("./errors-CJU8CHng.cjs");
-const require_topologyQueryFns = require("./topologyQueryFns-D5hBmDkc.cjs");
+const require_topologyQueryFns = require("./topologyQueryFns-CYoIx1Vr.cjs");
 const require_vecOps = require("./vecOps-CCnJt-yH.cjs");
-const require_shapeFns = require("./shapeFns-DdPt7PBo.cjs");
+const require_shapeFns = require("./shapeFns-BZu0MAZ5.cjs");
 //#region src/projection/projectionPlanes.ts
 /** Lookup table mapping each {@link ProjectionPlane} to its camera configuration. */
 var PROJECTION_PLANES = {

package/dist/{cameraFns-B4_7AIw0.js → cameraFns-tiRxjxGd.js}

@@ -1,8 +1,8 @@
-import { it as getKernel, n as castResultShape, nt as _usingCtx } from "./shapeTypes-Cw-8_69M.js";
+import { it as getKernel, n as castResultShape, nt as _usingCtx } from "./shapeTypes-DUGhC32A.js";
 import { I as unwrap, O as ok, d as validationError, v as err } from "./errors-B3CDG537.js";
-import { s as getEdges } from "./topologyQueryFns-BT4CdXa2.js";
+import { s as getEdges } from "./topologyQueryFns-Dsmto2eL.js";
 import { c as vecLength, d as vecNormalize, g as vecSub, r as vecCross } from "./vecOps-SKPRvPH-.js";
-import { t as clone } from "./shapeFns-DdmglyM8.js";
+import { t as clone } from "./shapeFns-tTkC3Ry7.js";
 //#region src/projection/projectionPlanes.ts
 /** Lookup table mapping each {@link ProjectionPlane} to its camera configuration. */
 var PROJECTION_PLANES = {

package/dist/core.cjs

@@ -1,5 +1,5 @@
 Object.defineProperty(exports, Symbol.toStringTag, { value: "Module" });
-const require_shapeTypes = require("./shapeTypes-DbUdKYv8.cjs");
+const require_shapeTypes = require("./shapeTypes-CIbdFdRS.cjs");
 const require_bug = require("./bug-O02CsAmt.cjs");
 const require_errors = require("./errors-CJU8CHng.cjs");
 const require_constants = require("./constants-BOVyEYGH.cjs");

package/dist/core.js

@@ -1,4 +1,4 @@
-import { $ as withScope, C as isSolid, D as isClosedWire, E as closedWire, G as createHandle, H as is2D, J as isLive, K as createKernelHandle, L as validSolid, M as isValidSolid, N as manifoldShell, O as isManifoldShell, P as orientedFace, R as getShapeKind, S as isShell, T as isWire, U as is3D, W as DisposalScope, _ as isCompound, b as isShape1D, et as withScopeResult, i as castShape, k as isOrientedFace, tt as withScopeResultAsync, v as isEdge, w as isVertex, x as isShape3D, y as isFace } from "./shapeTypes-Cw-8_69M.js";
+import { $ as withScope, C as isSolid, D as isClosedWire, E as closedWire, G as createHandle, H as is2D, J as isLive, K as createKernelHandle, L as validSolid, M as isValidSolid, N as manifoldShell, O as isManifoldShell, P as orientedFace, R as getShapeKind, S as isShell, T as isWire, U as is3D, W as DisposalScope, _ as isCompound, b as isShape1D, et as withScopeResult, i as castShape, k as isOrientedFace, tt as withScopeResultAsync, v as isEdge, w as isVertex, x as isShape3D, y as isFace } from "./shapeTypes-DUGhC32A.js";
 import { n as bug, t as BrepBugError } from "./bug-BdOHwn_e.js";
 import { C as isOk, D as match, E as mapErr, F as tryCatchAsync, I as unwrap, L as unwrapErr, O as ok, P as tryCatch, R as unwrapOr, S as isErr, _ as collect, a as moduleInitError, c as sketcherStateError, d as validationError, g as andThen, i as kernelError, l as typeCastError, m as OK, n as computationError, o as queryError, r as ioError, u as unsupportedError, v as err, w as map, y as flatMap, z as unwrapOrElse } from "./errors-B3CDG537.js";
 import { n as HASH_CODE_MAX, r as RAD2DEG, t as DEG2RAD } from "./constants-ITRzCnCp.js";

package/dist/{cornerFinder-Bvb8bDUP.cjs → cornerFinder-2ET6TfY3.cjs}

@@ -1,6 +1,6 @@
 const require_constants = require("./constants-BOVyEYGH.cjs");
 const require_arrayAccess = require("./arrayAccess-e4H9cBfh.cjs");
-const require_helpers = require("./helpers-4pH_jO62.cjs");
+const require_helpers = require("./helpers-CPSIFLtb.cjs");
 //#region src/query/cornerFinder.ts
 var PI_2 = 2 * Math.PI;
 function positiveHalfAngle(angle) {

package/dist/{cornerFinder-C4ZgQKf7.js → cornerFinder-j6mm48kY.js}

@@ -1,6 +1,6 @@
 import { t as DEG2RAD } from "./constants-ITRzCnCp.js";
 import { n as getAtOrThrow } from "./arrayAccess-DrUGPADn.js";
-import { _ as samePoint, p as distance2d, u as angle2d } from "./helpers-QKQZ-Fr6.js";
+import { _ as samePoint, p as distance2d, u as angle2d } from "./helpers-D2e6tjMb.js";
 //#region src/query/cornerFinder.ts
 var PI_2 = 2 * Math.PI;
 function positiveHalfAngle(angle) {

package/dist/{curveFns-CLG5eRx5.cjs → curveFns-CRs4VDhr.cjs}

@@ -1,4 +1,4 @@
-const require_shapeTypes = require("./shapeTypes-DbUdKYv8.cjs");
+const require_shapeTypes = require("./shapeTypes-CIbdFdRS.cjs");
 const require_errors = require("./errors-CJU8CHng.cjs");
 //#region src/topology/curveFns.ts
 /**

package/dist/{curveFns-Sl36NbVb.js → curveFns-DSouEUKA.js}

@@ -1,4 +1,4 @@
-import { T as isWire, h as disposeResultShape, it as getKernel, n as castResultShape, v as isEdge } from "./shapeTypes-Cw-8_69M.js";
+import { T as isWire, h as disposeResultShape, it as getKernel, n as castResultShape, v as isEdge } from "./shapeTypes-DUGhC32A.js";
 import { O as ok, l as typeCastError, v as err } from "./errors-B3CDG537.js";
 //#region src/topology/curveFns.ts
 /**

package/dist/{drawFns-DXQGzZpq.js → drawFns-CDBjUHVb.js}

@@ -1,22 +1,22 @@
-import { W as DisposalScope, c as createEdge, it as getKernel, l as createFace, nt as _usingCtx, p as createWire } from "./shapeTypes-Cw-8_69M.js";
+import { W as DisposalScope, c as createEdge, it as getKernel, l as createFace, nt as _usingCtx, p as createWire } from "./shapeTypes-DUGhC32A.js";
 import { i as wasmIndex, n as bug } from "./bug-BdOHwn_e.js";
 import { I as unwrap, s as safeIndex } from "./errors-B3CDG537.js";
-import { s as getEdges } from "./topologyQueryFns-BT4CdXa2.js";
+import { s as getEdges } from "./topologyQueryFns-Dsmto2eL.js";
 import { t as DEG2RAD } from "./constants-ITRzCnCp.js";
 import { r as toVec3 } from "./types-D24Y27N0.js";
 import { d as vecNormalize, g as vecSub, h as vecScale, m as vecRotate, r as vecCross } from "./vecOps-SKPRvPH-.js";
 import { a as planeToWorld, o as resolvePlane } from "./planeOps-Cp6GQ23-.js";
-import { d as pointOnSurface, l as normalAt, m as uvBounds, r as faceCenter, u as outerWire, v as copyShape, y as downcast } from "./faceFns-Bk5OdHMb.js";
-import { h as offsetWire2D, i as curveIsClosed, l as curveStartPoint } from "./curveFns-Sl36NbVb.js";
+import { d as pointOnSurface, l as normalAt, m as uvBounds, r as faceCenter, u as outerWire, v as copyShape, y as downcast } from "./faceFns-C0IqnONT.js";
+import { h as offsetWire2D, i as curveIsClosed, l as curveStartPoint } from "./curveFns-DSouEUKA.js";
 import { n as getAtOrThrow, r as lastOrThrow, t as firstOrThrow } from "./arrayAccess-DrUGPADn.js";
-import { c as makeBSplineApproximation, d as makeCircle, f as makeEllipse, m as makeHelix, r as makeFace, s as assembleWire } from "./surfaceBuilders-DI0oXs1Z.js";
-import { a as Blueprints, c as make2dOffset, i as CompoundBlueprint, l as intersectCurves, n as BaseSketcher2d, o as chamferCurves, s as filletCurves, u as Flatbush } from "./blueprintSketcher-DuhTWUAS.js";
-import { _ as samePoint$1, b as subtract2d, c as PRECISION_OFFSET, l as add2d, y as squareDistance2d } from "./helpers-QKQZ-Fr6.js";
-import { _ as Curve2D, a as edgeToCurve, c as make2dCircle, d as make2dInerpolatedBSplineCurve, f as make2dSegmentCurve, g as approximateAsSvgCompatibleCurve, i as curvesAsEdgesOnPlane, l as make2dEllipse, o as make2dArcFromCenter, t as Blueprint, v as deserializeCurve2D, y as BoundingBox2d } from "./blueprint-DlMt2gFV.js";
-import { t as cornerFinder } from "./cornerFinder-C4ZgQKf7.js";
-import { c as roundedRectangleBlueprint, n as fuse2D, r as intersect2D, s as polysidesBlueprint, t as cut2D } from "./boolean2D-DFkUpxlE.js";
-import { _ as wrapSketchDataArray, a as Sketch, g as wrapSketchData, i as Sketches, t as textBlueprints } from "./textBlueprints-B7Fqp2Hl.js";
-import { i as projectEdges, t as cameraFromPlane } from "./cameraFns-B4_7AIw0.js";
+import { c as makeBSplineApproximation, d as makeCircle, f as makeEllipse, m as makeHelix, r as makeFace, s as assembleWire } from "./surfaceBuilders-PnbuNC6X.js";
+import { a as Blueprints, c as make2dOffset, i as CompoundBlueprint, l as intersectCurves, n as BaseSketcher2d, o as chamferCurves, s as filletCurves, u as Flatbush } from "./blueprintSketcher-9hdFqAKq.js";
+import { _ as samePoint$1, b as subtract2d, c as PRECISION_OFFSET, l as add2d, y as squareDistance2d } from "./helpers-D2e6tjMb.js";
+import { _ as Curve2D, a as edgeToCurve, c as make2dCircle, d as make2dInerpolatedBSplineCurve, f as make2dSegmentCurve, g as approximateAsSvgCompatibleCurve, i as curvesAsEdgesOnPlane, l as make2dEllipse, o as make2dArcFromCenter, t as Blueprint, v as deserializeCurve2D, y as BoundingBox2d } from "./blueprint-CQCMv1dT.js";
+import { t as cornerFinder } from "./cornerFinder-j6mm48kY.js";
+import { c as roundedRectangleBlueprint, n as fuse2D, r as intersect2D, s as polysidesBlueprint, t as cut2D } from "./boolean2D-hkBchHCX.js";
+import { _ as wrapSketchDataArray, a as Sketch, g as wrapSketchData, i as Sketches, t as textBlueprints } from "./textBlueprints-C7mPkR_V.js";
+import { i as projectEdges, t as cameraFromPlane } from "./cameraFns-tiRxjxGd.js";
 //#region src/2d/lib/stitching.ts
 /**
 * Group a flat list of curves into connected chains by matching endpoints.

package/dist/{drawFns-BOTtZqQ1.cjs → drawFns-DOY9mr5Z.cjs}

@@ -1,22 +1,22 @@
-const require_textBlueprints = require("./textBlueprints-DbbfJcHz.cjs");
-const require_shapeTypes = require("./shapeTypes-DbUdKYv8.cjs");
+const require_textBlueprints = require("./textBlueprints-DKmwMA8f.cjs");
+const require_shapeTypes = require("./shapeTypes-CIbdFdRS.cjs");
 const require_bug = require("./bug-O02CsAmt.cjs");
 const require_errors = require("./errors-CJU8CHng.cjs");
-const require_topologyQueryFns = require("./topologyQueryFns-D5hBmDkc.cjs");
+const require_topologyQueryFns = require("./topologyQueryFns-CYoIx1Vr.cjs");
 const require_constants = require("./constants-BOVyEYGH.cjs");
 const require_types = require("./types-KjA8tY4Y.cjs");
 const require_vecOps = require("./vecOps-CCnJt-yH.cjs");
 const require_planeOps = require("./planeOps-Cr25KWWA.cjs");
-const require_faceFns = require("./faceFns-B4X-xM8V.cjs");
-const require_curveFns = require("./curveFns-CLG5eRx5.cjs");
+const require_faceFns = require("./faceFns-5_JXMBDb.cjs");
+const require_curveFns = require("./curveFns-CRs4VDhr.cjs");
 const require_arrayAccess = require("./arrayAccess-e4H9cBfh.cjs");
-const require_surfaceBuilders = require("./surfaceBuilders-QPtrtoXG.cjs");
-const require_blueprintSketcher = require("./blueprintSketcher-DEF16yRm.cjs");
-const require_helpers = require("./helpers-4pH_jO62.cjs");
-const require_blueprint = require("./blueprint-DAwKV0lS.cjs");
-const require_cornerFinder = require("./cornerFinder-Bvb8bDUP.cjs");
-const require_boolean2D = require("./boolean2D-CH06mcQA.cjs");
-const require_cameraFns = require("./cameraFns-B2a5MCUi.cjs");
+const require_surfaceBuilders = require("./surfaceBuilders-DOFKdphI.cjs");
+const require_blueprintSketcher = require("./blueprintSketcher-BSo04hhn.cjs");
+const require_helpers = require("./helpers-CPSIFLtb.cjs");
+const require_blueprint = require("./blueprint-BwLFEcr6.cjs");
+const require_cornerFinder = require("./cornerFinder-2ET6TfY3.cjs");
+const require_boolean2D = require("./boolean2D-HvEktvx_.cjs");
+const require_cameraFns = require("./cameraFns-BWgU6410.cjs");
 //#region src/2d/lib/stitching.ts
 /**
 * Group a flat list of curves into connected chains by matching endpoints.

package/dist/{faceFns-B4X-xM8V.cjs → faceFns-5_JXMBDb.cjs}

@@ -1,6 +1,6 @@
-const require_shapeTypes = require("./shapeTypes-DbUdKYv8.cjs");
+const require_shapeTypes = require("./shapeTypes-CIbdFdRS.cjs");
 const require_errors = require("./errors-CJU8CHng.cjs");
-const require_topologyQueryFns = require("./topologyQueryFns-D5hBmDkc.cjs");
+const require_topologyQueryFns = require("./topologyQueryFns-CYoIx1Vr.cjs");
 const require_types = require("./types-KjA8tY4Y.cjs");
 //#region src/topology/cast.ts
 var TOPO_ENUM = {

package/dist/{faceFns-Bk5OdHMb.js → faceFns-C0IqnONT.js}

@@ -1,6 +1,6 @@
-import { i as castShape, it as getKernel } from "./shapeTypes-Cw-8_69M.js";
+import { i as castShape, it as getKernel } from "./shapeTypes-DUGhC32A.js";
 import { I as unwrap, O as ok, l as typeCastError, v as err } from "./errors-B3CDG537.js";
-import { a as getCachedSurfaceType } from "./topologyQueryFns-BT4CdXa2.js";
+import { a as getCachedSurfaceType } from "./topologyQueryFns-Dsmto2eL.js";
 import { r as toVec3 } from "./types-D24Y27N0.js";
 //#region src/topology/cast.ts
 var TOPO_ENUM = {