brepjs 18.118.13 → 18.118.14

package/dist/2d.cjs

@@ -2,10 +2,10 @@ Object.defineProperty(exports, Symbol.toStringTag, { value: "Module" });
 const require_shapeTypes = require("./shapeTypes-C4gRoPYX.cjs");
 const require_errors = require("./errors-CXJtc4I7.cjs");
 const require_topologyQueryFns = require("./topologyQueryFns-BzIV1jHw.cjs");
-const require_blueprintSketcher = require("./blueprintSketcher-DRGumaWR.cjs");
-const require_blueprint = require("./blueprint-DF-Ig1SW.cjs");
-const require_boolean2D = require("./boolean2D-5WdQm5Kb.cjs");
-const require_blueprintFns = require("./blueprintFns-CjvHOuIy.cjs");
+const require_blueprintSketcher = require("./blueprintSketcher-CGnohIOe.cjs");
+const require_blueprint = require("./blueprint-CN536u9V.cjs");
+const require_boolean2D = require("./boolean2D-DnBT9gQ5.cjs");
+const require_blueprintFns = require("./blueprintFns-CF-6WzuR.cjs");
 //#region src/core/curve2dHandle.ts
 /**
 * Wrap a raw kernel 2D curve handle with brand + disposal tracking.

package/dist/2d.js

@@ -1,10 +1,10 @@
 import { G as createKernelHandle, rt as getKernel2D, s as createEdge } from "./shapeTypes-BalkiKtK.js";
 import { A as ok, b as err, d as validationError, t as BrepErrorCode } from "./errors-DNWJsfVU.js";
 import { w as kernelCallRaw } from "./topologyQueryFns-vDjZw1k2.js";
-import { a as Blueprints, i as CompoundBlueprint, r as organiseBlueprints } from "./blueprintSketcher-BIUHqWo9.js";
-import { _ as Curve2D, t as Blueprint, y as BoundingBox2d } from "./blueprint-CJ7k25eW.js";
-import { a as fuseBlueprints, c as roundedRectangleBlueprint, i as cutBlueprints, n as fuse2D, o as intersectBlueprints, r as intersect2D, s as polysidesBlueprint, t as cut2D } from "./boolean2D-Buf04D7l.js";
-import { S as reverseCurve, _ as curve2dIsOnCurve, a as isInside2D, b as curve2dSplitAt, c as scale2D, d as stretch2D, f as toSVGPathD, g as curve2dFirstPoint, h as curve2dDistanceFrom, i as getOrientation2D, l as sketchOnFace2D, m as curve2dBoundingBox, o as mirror2D, p as translate2D, r as getBounds2D, s as rotate2D, t as createBlueprint, u as sketchOnPlane2D, v as curve2dLastPoint, x as curve2dTangentAt, y as curve2dParameter } from "./blueprintFns-BKtVfo16.js";
+import { a as Blueprints, i as CompoundBlueprint, r as organiseBlueprints } from "./blueprintSketcher-CY9DgQqk.js";
+import { _ as Curve2D, t as Blueprint, y as BoundingBox2d } from "./blueprint-dqI319c7.js";
+import { a as fuseBlueprints, c as roundedRectangleBlueprint, i as cutBlueprints, n as fuse2D, o as intersectBlueprints, r as intersect2D, s as polysidesBlueprint, t as cut2D } from "./boolean2D-CaAwVwCR.js";
+import { S as reverseCurve, _ as curve2dIsOnCurve, a as isInside2D, b as curve2dSplitAt, c as scale2D, d as stretch2D, f as toSVGPathD, g as curve2dFirstPoint, h as curve2dDistanceFrom, i as getOrientation2D, l as sketchOnFace2D, m as curve2dBoundingBox, o as mirror2D, p as translate2D, r as getBounds2D, s as rotate2D, t as createBlueprint, u as sketchOnPlane2D, v as curve2dLastPoint, x as curve2dTangentAt, y as curve2dParameter } from "./blueprintFns-Ci1QVESM.js";
 //#region src/core/curve2dHandle.ts
 /**
 * Wrap a raw kernel 2D curve handle with brand + disposal tracking.

package/dist/{blueprint-DF-Ig1SW.cjs → blueprint-CN536u9V.cjs}

@@ -853,8 +853,11 @@ var Blueprint = class Blueprint {
 	*/
 	sketchOnPlane(inputPlane, origin) {
 		const plane = inputPlane && typeof inputPlane !== "string" ? { ...inputPlane } : require_planeOps.makePlane(inputPlane, origin);
+		const edges = curvesAsEdgesOnPlane(this.curves, plane);
+		const wire = assembleWire(edges);
+		for (const e of edges) e[Symbol.dispose]();
 		return {
-			wire: assembleWire(curvesAsEdgesOnPlane(this.curves, plane)),
+			wire,
 			defaultOrigin: plane.origin,
 			defaultDirection: plane.zDir
 		};
@@ -868,10 +871,12 @@ var Blueprint = class Blueprint {
 	*/
 	sketchOnFace(face, scaleMode) {
 		const kernel = require_shapeTypes.getKernel();
-		const wire = assembleWire(require_errors.unwrap(curvesAsEdgesOnFace(this.curves, face, scaleMode)));
+		const edges = require_errors.unwrap(curvesAsEdgesOnFace(this.curves, face, scaleMode));
+		const wire = assembleWire(edges);
+		for (const e of edges) e[Symbol.dispose]();
 		kernel.buildCurves3d(wire.wrapped);
 		const fixedWire = kernel.fixWireOnFace(wire.wrapped, face.wrapped, 1e-9);
-		wire.delete();
+		wire[Symbol.dispose]();
 		return {
 			wire: require_shapeTypes.createWire(fixedWire),
 			baseFace: face

package/dist/{blueprint-CJ7k25eW.js → blueprint-dqI319c7.js}

@@ -852,8 +852,11 @@ var Blueprint = class Blueprint {
 	*/
 	sketchOnPlane(inputPlane, origin) {
 		const plane = inputPlane && typeof inputPlane !== "string" ? { ...inputPlane } : makePlane(inputPlane, origin);
+		const edges = curvesAsEdgesOnPlane(this.curves, plane);
+		const wire = assembleWire(edges);
+		for (const e of edges) e[Symbol.dispose]();
 		return {
-			wire: assembleWire(curvesAsEdgesOnPlane(this.curves, plane)),
+			wire,
 			defaultOrigin: plane.origin,
 			defaultDirection: plane.zDir
 		};
@@ -867,10 +870,12 @@ var Blueprint = class Blueprint {
 	*/
 	sketchOnFace(face, scaleMode) {
 		const kernel = getKernel();
-		const wire = assembleWire(unwrap(curvesAsEdgesOnFace(this.curves, face, scaleMode)));
+		const edges = unwrap(curvesAsEdgesOnFace(this.curves, face, scaleMode));
+		const wire = assembleWire(edges);
+		for (const e of edges) e[Symbol.dispose]();
 		kernel.buildCurves3d(wire.wrapped);
 		const fixedWire = kernel.fixWireOnFace(wire.wrapped, face.wrapped, 1e-9);
-		wire.delete();
+		wire[Symbol.dispose]();
 		return {
 			wire: createWire(fixedWire),
 			baseFace: face

package/dist/{blueprintFns-CjvHOuIy.cjs → blueprintFns-CF-6WzuR.cjs}

@@ -1,6 +1,6 @@
 const require_errors = require("./errors-CXJtc4I7.cjs");
-const require_blueprintSketcher = require("./blueprintSketcher-DRGumaWR.cjs");
-const require_blueprint = require("./blueprint-DF-Ig1SW.cjs");
+const require_blueprintSketcher = require("./blueprintSketcher-CGnohIOe.cjs");
+const require_blueprint = require("./blueprint-CN536u9V.cjs");
 //#region src/2d/lib/curve2dFns.ts
 /**
 * Return a reversed copy of the curve (non-mutating).

package/dist/{blueprintFns-BKtVfo16.js → blueprintFns-Ci1QVESM.js}

@@ -1,6 +1,6 @@
 import { A as ok, b as err, d as validationError, t as BrepErrorCode } from "./errors-DNWJsfVU.js";
-import { i as CompoundBlueprint } from "./blueprintSketcher-BIUHqWo9.js";
-import { t as Blueprint } from "./blueprint-CJ7k25eW.js";
+import { i as CompoundBlueprint } from "./blueprintSketcher-CY9DgQqk.js";
+import { t as Blueprint } from "./blueprint-dqI319c7.js";
 //#region src/2d/lib/curve2dFns.ts
 /**
 * Return a reversed copy of the curve (non-mutating).

package/dist/{blueprintSketcher-DRGumaWR.cjs → blueprintSketcher-CGnohIOe.cjs}

@@ -4,7 +4,7 @@ const require_errors = require("./errors-CXJtc4I7.cjs");
 const require_constants = require("./constants-BOVyEYGH.cjs");
 const require_arrayAccess = require("./arrayAccess-e4H9cBfh.cjs");
 const require_helpers = require("./helpers-D0be4TzF.cjs");
-const require_blueprint = require("./blueprint-DF-Ig1SW.cjs");
+const require_blueprint = require("./blueprint-CN536u9V.cjs");
 //#region node_modules/flatqueue/index.js
 /**
 * @typedef {Float64ArrayConstructor | Float32ArrayConstructor |

package/dist/{blueprintSketcher-BIUHqWo9.js → blueprintSketcher-CY9DgQqk.js}

@@ -4,7 +4,7 @@ import { A as ok, R as unwrap, T as isOk, b as err, h as bug, n as computationEr
 import { r as RAD2DEG, t as DEG2RAD } from "./constants-ITRzCnCp.js";
 import { t as firstOrThrow } from "./arrayAccess-DrUGPADn.js";
 import { _ as samePoint, b as subtract2d, d as cartesianToPolar, f as crossProduct2d, g as rotate2d, h as polarToCartesian, l as add2d, m as polarAngle2d, o as normalize2d, p as distance2d, v as scalarMultiply2d } from "./helpers-zVYq0h_A.js";
-import { _ as Curve2D, c as make2dCircle, f as make2dSegmentCurve, h as approximateAsBSpline, m as make2dThreePointArc, n as asSVG, o as make2dArcFromCenter, p as make2dTangentArc, r as viewbox, s as make2dBezierCurve, t as Blueprint, u as make2dEllipseArc, x as isPoint2D, y as BoundingBox2d } from "./blueprint-CJ7k25eW.js";
+import { _ as Curve2D, c as make2dCircle, f as make2dSegmentCurve, h as approximateAsBSpline, m as make2dThreePointArc, n as asSVG, o as make2dArcFromCenter, p as make2dTangentArc, r as viewbox, s as make2dBezierCurve, t as Blueprint, u as make2dEllipseArc, x as isPoint2D, y as BoundingBox2d } from "./blueprint-dqI319c7.js";
 //#region node_modules/flatqueue/index.js
 /**
 * @typedef {Float64ArrayConstructor | Float32ArrayConstructor |

package/dist/{boolean2D-Buf04D7l.js → boolean2D-CaAwVwCR.js}

@@ -2,9 +2,9 @@ import { n as wasmIndex } from "./vec3-Dpha8d5k.js";
 import { R as unwrap, h as bug, s as safeIndex } from "./errors-DNWJsfVU.js";
 import { r as lastOrThrow } from "./arrayAccess-DrUGPADn.js";
 import { v as zip } from "./surfaceBuilders-HAF4Xtow.js";
-import { a as Blueprints, i as CompoundBlueprint, l as intersectCurves, r as organiseBlueprints, t as BlueprintSketcher, u as Flatbush } from "./blueprintSketcher-BIUHqWo9.js";
+import { a as Blueprints, i as CompoundBlueprint, l as intersectCurves, r as organiseBlueprints, t as BlueprintSketcher, u as Flatbush } from "./blueprintSketcher-CY9DgQqk.js";
 import { _ as samePoint$1, b as subtract2d, f as crossProduct2d, s as PRECISION_INTERSECTION } from "./helpers-zVYq0h_A.js";
-import { b as removeDuplicatePoints, f as make2dSegmentCurve, t as Blueprint } from "./blueprint-CJ7k25eW.js";
+import { b as removeDuplicatePoints, f as make2dSegmentCurve, t as Blueprint } from "./blueprint-dqI319c7.js";
 //#region src/2d/blueprints/cannedBlueprints.ts
 /**
 * Create a regular polygon blueprint inscribed in a circle of the given radius.

package/dist/{boolean2D-5WdQm5Kb.cjs → boolean2D-DnBT9gQ5.cjs}

@@ -2,9 +2,9 @@ const require_vec3 = require("./vec3-CFwOI0ZI.cjs");
 const require_errors = require("./errors-CXJtc4I7.cjs");
 const require_arrayAccess = require("./arrayAccess-e4H9cBfh.cjs");
 const require_surfaceBuilders = require("./surfaceBuilders-DWHDogVL.cjs");
-const require_blueprintSketcher = require("./blueprintSketcher-DRGumaWR.cjs");
+const require_blueprintSketcher = require("./blueprintSketcher-CGnohIOe.cjs");
 const require_helpers = require("./helpers-D0be4TzF.cjs");
-const require_blueprint = require("./blueprint-DF-Ig1SW.cjs");
+const require_blueprint = require("./blueprint-CN536u9V.cjs");
 //#region src/2d/blueprints/cannedBlueprints.ts
 /**
 * Create a regular polygon blueprint inscribed in a circle of the given radius.

package/dist/brepjs.cjs

@@ -1,5 +1,5 @@
 Object.defineProperty(exports, Symbol.toStringTag, { value: "Module" });
-const require_textBlueprints = require("./textBlueprints-DgTBXc6O.cjs");
+const require_textBlueprints = require("./textBlueprints-D5mNvqKF.cjs");
 const require_shapeTypes = require("./shapeTypes-C4gRoPYX.cjs");
 const require_occtWasmAdapter = require("./occtWasmAdapter-CWX5KCl8.cjs");
 const require_vec3 = require("./vec3-CFwOI0ZI.cjs");
@@ -17,18 +17,18 @@ const require_arrayAccess = require("./arrayAccess-e4H9cBfh.cjs");
 const require_surfaceBuilders = require("./surfaceBuilders-DWHDogVL.cjs");
 const require_solidBuilders = require("./solidBuilders-CHzmSo67.cjs");
 const require_healingFns = require("./healingFns-BZ-TOacm.cjs");
-const require_threadFns = require("./threadFns-B6SQd48K.cjs");
-const require_blueprintSketcher = require("./blueprintSketcher-DRGumaWR.cjs");
+const require_threadFns = require("./threadFns-DDcOeRGs.cjs");
+const require_blueprintSketcher = require("./blueprintSketcher-CGnohIOe.cjs");
 const require_helpers = require("./helpers-D0be4TzF.cjs");
-const require_drawFns = require("./drawFns-DZHPT-nb.cjs");
+const require_drawFns = require("./drawFns-CMyY6ED-.cjs");
 const require_measureFns = require("./measureFns-cK6MSs6B.cjs");
 const require_cornerFinder = require("./cornerFinder-Bss_mZV9.cjs");
-const require_boolean2D = require("./boolean2D-5WdQm5Kb.cjs");
-const require_blueprintFns = require("./blueprintFns-CjvHOuIy.cjs");
-const require_importFns = require("./importFns-Tgnymh7F.cjs");
-const require_loftFns = require("./loftFns-Be0OZxYM.cjs");
-const require_cameraFns = require("./cameraFns-CiGOarQ4.cjs");
-const require_textMetrics = require("./textMetrics-BH-izd6N.cjs");
+const require_boolean2D = require("./boolean2D-DnBT9gQ5.cjs");
+const require_blueprintFns = require("./blueprintFns-CF-6WzuR.cjs");
+const require_importFns = require("./importFns-CvlUuJ59.cjs");
+const require_loftFns = require("./loftFns-BTWRncKQ.cjs");
+const require_cameraFns = require("./cameraFns-Ckw5prda.cjs");
+const require_textMetrics = require("./textMetrics-CgyvE6u0.cjs");
 const require_adjacencyFns = require("./adjacencyFns-BdxIbZtR.cjs");
 const require_refResolveFns = require("./refResolveFns-BLM5XlZR.cjs");
 const require_workerPool = require("./workerPool-D30NsiIW.cjs");
@@ -241,8 +241,8 @@ function repairMesh(mesh, opts, id) {
 	if (require_errors.isErr(engine)) return engine;
 	try {
 		try {
-			var _usingCtx$7 = require_shapeTypes._usingCtx();
-			const repaired = _usingCtx$7.u(engine.value.repair_mesh(mesh.vertices, mesh.triangles, resolution, padding));
+			var _usingCtx$8 = require_shapeTypes._usingCtx();
+			const repaired = _usingCtx$8.u(engine.value.repair_mesh(mesh.vertices, mesh.triangles, resolution, padding));
 			const vertexCount = repaired.positions.length / 3;
 			return require_errors.ok({
 				vertices: repaired.positions,
@@ -256,9 +256,9 @@ function repairMesh(mesh, opts, id) {
 				}]
 			});
 		} catch (_) {
-			_usingCtx$7.e = _;
+			_usingCtx$8.e = _;
 		} finally {
-			_usingCtx$7.d();
+			_usingCtx$8.d();
 		}
 	} catch (cause) {
 		return require_errors.err(require_errors.computationError("VOXEL_REPAIR_FAILED", cause instanceof Error ? cause.message : "voxel repair failed (grid too large?).", cause));
@@ -337,12 +337,12 @@ function offsetMesh(mesh, distance, opts, id) {
 	if (require_errors.isErr(engine)) return engine;
 	try {
 		try {
-			var _usingCtx$6 = require_shapeTypes._usingCtx();
-			return meshFromResult(_usingCtx$6.u(engine.value.offset_mesh(mesh.vertices, mesh.triangles, distance, params.value.resolution, params.value.padding)));
+			var _usingCtx$7 = require_shapeTypes._usingCtx();
+			return meshFromResult(_usingCtx$7.u(engine.value.offset_mesh(mesh.vertices, mesh.triangles, distance, params.value.resolution, params.value.padding)));
 		} catch (_) {
-			_usingCtx$6.e = _;
+			_usingCtx$7.e = _;
 		} finally {
-			_usingCtx$6.d();
+			_usingCtx$7.d();
 		}
 	} catch (cause) {
 		return require_errors.err(require_errors.computationError("VOXEL_OFFSET_FAILED", cause instanceof Error ? cause.message : "voxel offset failed (grid too large?).", cause));
@@ -467,9 +467,9 @@ function resolveGridParams$1(opts) {
 */
 function meshFromField(field) {
 	try {
-		var _usingCtx$5 = require_shapeTypes._usingCtx();
+		var _usingCtx$6 = require_shapeTypes._usingCtx();
 		const rawResult = field.contour();
-		const { positions, normals, indices } = _usingCtx$5.u({
+		const { positions, normals, indices } = _usingCtx$6.u({
 			value: rawResult,
 			[Symbol.dispose]() {
 				rawResult.free();
@@ -489,9 +489,9 @@ function meshFromField(field) {
 			}]
 		});
 	} catch (_) {
-		_usingCtx$5.e = _;
+		_usingCtx$6.e = _;
 	} finally {
-		_usingCtx$5.d();
+		_usingCtx$6.d();
 	}
 }
 function fieldDeletable(raw) {
@@ -1056,12 +1056,12 @@ function latticeInfill(mesh, opts, id) {
 	const { tag, period, thickness, resolution, padding } = resolved.value;
 	try {
 		try {
-			var _usingCtx$4 = require_shapeTypes._usingCtx();
-			return require_errors.ok(toMesh(_usingCtx$4.u(engine.value.lattice_infill(mesh.vertices, mesh.triangles, resolution, padding, tag, period, thickness))));
+			var _usingCtx$5 = require_shapeTypes._usingCtx();
+			return require_errors.ok(toMesh(_usingCtx$5.u(engine.value.lattice_infill(mesh.vertices, mesh.triangles, resolution, padding, tag, period, thickness))));
 		} catch (_) {
-			_usingCtx$4.e = _;
+			_usingCtx$5.e = _;
 		} finally {
-			_usingCtx$4.d();
+			_usingCtx$5.d();
 		}
 	} catch (cause) {
 		return require_errors.err(require_errors.computationError("LATTICE_INFILL_FAILED", cause instanceof Error ? cause.message : "lattice infill failed (grid too large?).", cause));
@@ -3741,10 +3741,20 @@ function resolveTargetFace(shape, faceSpec) {
 	}
 	return require_errors.ok(faceSpec);
 }
-/** Convert a DrawingLike or Wire to a ClosedWire & PlanarWire (profiles are always closed and planar). */
+/**
+* Convert a DrawingLike or Wire to a ClosedWire & PlanarWire (profiles are always
+* closed and planar). `owned` is true when we materialised a fresh sketch wire
+* (the caller must dispose it); false when the caller's own Wire is passed through.
+*/
 function toWire(profile) {
-	if ("sketchOnPlane" in profile && typeof profile.sketchOnPlane === "function") return profile.sketchOnPlane("XY").wire;
-	return profile;
+	if ("sketchOnPlane" in profile && typeof profile.sketchOnPlane === "function") return {
+		wire: profile.sketchOnPlane("XY").wire,
+		owned: true
+	};
+	return {
+		wire: profile,
+		owned: false
+	};
 }
 /**
 * Drill a hole through a 3D shape.
@@ -3847,19 +3857,31 @@ function drill(shape, options) {
 * inward by the specified depth, then subtracted from the shape.
 */
 function pocket(shape, options) {
-	const s = resolve(shape);
-	const { profile, depth } = options;
-	if (depth <= 0) return require_errors.err(require_errors.validationError("POCKET_INVALID_DEPTH", "Pocket depth must be positive"));
-	const targetResult = resolveTargetFace(s, options.face);
-	if (require_errors.isErr(targetResult)) return targetResult;
-	const targetFace = targetResult.value;
-	const normal = require_faceFns.normalAt(targetFace);
-	const center = require_faceFns.faceCenter(targetFace);
-	const faceResult = require_surfaceBuilders.makeFace(toWire(profile));
-	if (require_errors.isErr(faceResult)) return faceResult;
-	const toolResult = require_loftFns.extrude(require_shapeFns.translate(faceResult.value, center), require_vecOps.vecScale(require_vecOps.vecNormalize(normal), -depth));
-	if (require_errors.isErr(toolResult)) return toolResult;
-	return require_solidBuilders.cut(s, toolResult.value, { unsafe: true });
+	try {
+		var _usingCtx$4 = require_shapeTypes._usingCtx();
+		const s = resolve(shape);
+		const { profile, depth } = options;
+		if (depth <= 0) return require_errors.err(require_errors.validationError("POCKET_INVALID_DEPTH", "Pocket depth must be positive"));
+		const targetResult = resolveTargetFace(s, options.face);
+		if (require_errors.isErr(targetResult)) return targetResult;
+		const targetFace = targetResult.value;
+		const normal = require_faceFns.normalAt(targetFace);
+		const center = require_faceFns.faceCenter(targetFace);
+		const scope = _usingCtx$4.u(new require_shapeTypes.DisposalScope());
+		const { wire: w, owned } = toWire(profile);
+		if (owned) scope.register(w);
+		const faceResult = require_surfaceBuilders.makeFace(w);
+		if (require_errors.isErr(faceResult)) return faceResult;
+		scope.register(faceResult.value);
+		const toolResult = require_loftFns.extrude(scope.register(require_shapeFns.translate(faceResult.value, center)), require_vecOps.vecScale(require_vecOps.vecNormalize(normal), -depth));
+		if (require_errors.isErr(toolResult)) return toolResult;
+		scope.register(toolResult.value);
+		return require_solidBuilders.cut(s, toolResult.value, { unsafe: true });
+	} catch (_) {
+		_usingCtx$4.e = _;
+	} finally {
+		_usingCtx$4.d();
+	}
 }
 /**
 * Add a boss (2D profile extruded outward) onto a shape.
@@ -3868,19 +3890,31 @@ function pocket(shape, options) {
 * outward by the specified height, then fused with the shape.
 */
 function boss(shape, options) {
-	const s = resolve(shape);
-	const { profile, height } = options;
-	if (height <= 0) return require_errors.err(require_errors.validationError("BOSS_INVALID_HEIGHT", "Boss height must be positive"));
-	const targetResult = resolveTargetFace(s, options.face);
-	if (require_errors.isErr(targetResult)) return targetResult;
-	const targetFace = targetResult.value;
-	const normal = require_faceFns.normalAt(targetFace);
-	const center = require_faceFns.faceCenter(targetFace);
-	const faceResult = require_surfaceBuilders.makeFace(toWire(profile));
-	if (require_errors.isErr(faceResult)) return faceResult;
-	const toolResult = require_loftFns.extrude(require_shapeFns.translate(faceResult.value, center), require_vecOps.vecScale(require_vecOps.vecNormalize(normal), height));
-	if (require_errors.isErr(toolResult)) return toolResult;
-	return require_solidBuilders.fuse(s, toolResult.value, { unsafe: true });
+	try {
+		var _usingCtx3 = require_shapeTypes._usingCtx();
+		const s = resolve(shape);
+		const { profile, height } = options;
+		if (height <= 0) return require_errors.err(require_errors.validationError("BOSS_INVALID_HEIGHT", "Boss height must be positive"));
+		const targetResult = resolveTargetFace(s, options.face);
+		if (require_errors.isErr(targetResult)) return targetResult;
+		const targetFace = targetResult.value;
+		const normal = require_faceFns.normalAt(targetFace);
+		const center = require_faceFns.faceCenter(targetFace);
+		const scope = _usingCtx3.u(new require_shapeTypes.DisposalScope());
+		const { wire: w, owned } = toWire(profile);
+		if (owned) scope.register(w);
+		const faceResult = require_surfaceBuilders.makeFace(w);
+		if (require_errors.isErr(faceResult)) return faceResult;
+		scope.register(faceResult.value);
+		const toolResult = require_loftFns.extrude(scope.register(require_shapeFns.translate(faceResult.value, center)), require_vecOps.vecScale(require_vecOps.vecNormalize(normal), height));
+		if (require_errors.isErr(toolResult)) return toolResult;
+		scope.register(toolResult.value);
+		return require_solidBuilders.fuse(s, toolResult.value, { unsafe: true });
+	} catch (_) {
+		_usingCtx3.e = _;
+	} finally {
+		_usingCtx3.d();
+	}
 }
 /**
 * Mirror a shape and fuse it with the original.
@@ -3888,15 +3922,22 @@ function boss(shape, options) {
 * Common pattern: model half a part, then mirror-join for symmetry.
 */
 function mirrorJoin(shape, options) {
-	const s = resolve(shape);
-	const normal = options?.normal ?? [
-		1,
-		0,
-		0
-	];
-	const planeOrigin = options?.at;
-	if (require_vecOps.vecIsZero(normal)) return require_errors.err(require_errors.validationError("MIRROR_ZERO_NORMAL", "Mirror plane normal cannot be zero"));
-	return require_solidBuilders.fuse(s, require_shapeFns.mirror(s, normal, planeOrigin), { unsafe: true });
+	try {
+		var _usingCtx4 = require_shapeTypes._usingCtx();
+		const s = resolve(shape);
+		const normal = options?.normal ?? [
+			1,
+			0,
+			0
+		];
+		const planeOrigin = options?.at;
+		if (require_vecOps.vecIsZero(normal)) return require_errors.err(require_errors.validationError("MIRROR_ZERO_NORMAL", "Mirror plane normal cannot be zero"));
+		return require_solidBuilders.fuse(s, _usingCtx4.u(require_shapeFns.mirror(s, normal, planeOrigin)), { unsafe: true });
+	} catch (_) {
+		_usingCtx4.e = _;
+	} finally {
+		_usingCtx4.d();
+	}
 }
 /**
 * Create a rectangular (2D grid) pattern of a shape.