brepjs 18.118.12 → 18.118.13

package/dist/{occtWasmAdapter-8wX1Z2-I.cjs → occtWasmAdapter-CWX5KCl8.cjs}

@@ -1441,30 +1441,40 @@ function meshBoolean(_positionsA, _indicesA, _positionsB, _indicesB, _op, _toler
 }
 //#endregion
 //#region src/kernel/occtWasm/primitiveOps.ts
+/**
+* Apply an id-remapping positioning step (rotate/translate), releasing the
+* orphaned source slot. rotate/translate return fresh arena slots on occt-wasm;
+* the repositioned result shares the source's refcounted TShape and survives, so
+* releasing the pre-move id here plugs a per-positioned-primitive slot leak.
+*/
+function remap(k, id, next) {
+	if (next !== id) k.release(id);
+	return next;
+}
 function makeBox(k, width, height, depth) {
 	return handle("solid", k.makeBox(width, height, depth));
 }
 function makeCylinder(k, radius, height, center, direction) {
 	let id = k.makeCylinder(radius, height);
-	if (direction) id = rotateZToDirection(k, id, direction);
-	if (center && (center[0] !== 0 || center[1] !== 0 || center[2] !== 0)) id = k.translate(id, center[0], center[1], center[2]);
+	if (direction) id = remap(k, id, rotateZToDirection(k, id, direction));
+	if (center && (center[0] !== 0 || center[1] !== 0 || center[2] !== 0)) id = remap(k, id, k.translate(id, center[0], center[1], center[2]));
 	return handle("solid", id);
 }
 function makeSphere(k, radius, center) {
 	let id = k.makeSphere(radius);
-	if (center && (center[0] !== 0 || center[1] !== 0 || center[2] !== 0)) id = k.translate(id, center[0], center[1], center[2]);
+	if (center && (center[0] !== 0 || center[1] !== 0 || center[2] !== 0)) id = remap(k, id, k.translate(id, center[0], center[1], center[2]));
 	return handle("solid", id);
 }
 function makeCone(k, radius1, radius2, height, center, direction) {
 	let id = k.makeCone(radius1, radius2, height);
-	if (direction) id = rotateZToDirection(k, id, direction);
-	if (center && (center[0] !== 0 || center[1] !== 0 || center[2] !== 0)) id = k.translate(id, center[0], center[1], center[2]);
+	if (direction) id = remap(k, id, rotateZToDirection(k, id, direction));
+	if (center && (center[0] !== 0 || center[1] !== 0 || center[2] !== 0)) id = remap(k, id, k.translate(id, center[0], center[1], center[2]));
 	return handle("solid", id);
 }
 function makeTorus(k, majorRadius, minorRadius, center, direction) {
 	let id = k.makeTorus(majorRadius, minorRadius);
-	if (direction) id = rotateZToDirection(k, id, direction);
-	if (center && (center[0] !== 0 || center[1] !== 0 || center[2] !== 0)) id = k.translate(id, center[0], center[1], center[2]);
+	if (direction) id = remap(k, id, rotateZToDirection(k, id, direction));
+	if (center && (center[0] !== 0 || center[1] !== 0 || center[2] !== 0)) id = remap(k, id, k.translate(id, center[0], center[1], center[2]));
 	return handle("solid", id);
 }
 function makeEllipsoid(k, aLength, bLength, cLength) {
@@ -2942,6 +2952,7 @@ function linearPattern(k, shape, direction, spacing, count) {
 			iter.delete();
 		}
 	}
+	k.release(compoundId);
 	return results;
 }
 function circularPattern(k, shape, center, axis, angleStep, count) {
@@ -2963,6 +2974,7 @@ function circularPattern(k, shape, center, axis, angleStep, count) {
 			iter.delete();
 		}
 	}
+	k.release(compoundId);
 	return results;
 }
 function transformBatch(k, entries) {
@@ -3311,6 +3323,7 @@ function makeWire(k, Module, edges) {
 }
 function makeWireFromMixed(k, Module, items) {
 	const edgeIds = [];
+	const inputIds = new Set(items.map((it) => unwrap(it)));
 	for (const item of items) {
 		const sub = k.getSubShapes(unwrap(item), "edge");
 		try {
@@ -3325,6 +3338,7 @@ function makeWireFromMixed(k, Module, items) {
 		return handle("wire", k.makeWire(vec));
 	} finally {
 		vec.delete();
+		for (const id of edgeIds) if (!inputIds.has(id)) k.release(id);
 	}
 }
 function makeFace(k, wire, _planar) {
@@ -3397,11 +3411,13 @@ function buildSolidFromFaces(k, Module, points, faces, tolerance) {
 	}
 	const vec = makeVecU32(Module, faceIds);
 	try {
-		let sewn = k.sewAndSolidify(vec, tolerance);
-		sewn = k.fixFaceOrientations(sewn);
+		const sewn0 = k.sewAndSolidify(vec, tolerance);
+		const sewn = k.fixFaceOrientations(sewn0);
+		if (sewn !== sewn0) k.release(sewn0);
 		return wrapResult(k, sewn);
 	} finally {
 		vec.delete();
+		for (const id of faceIds) k.release(id);
 	}
 }
 function makeNonPlanarFace(k, wire) {
@@ -3469,6 +3485,7 @@ function triangulatedSurface(k, Module, points, rows, cols) {
 		return wrapResult(k, k.sewAndSolidify(vec, .001));
 	} finally {
 		vec.delete();
+		for (const id of faceIds) k.release(id);
 	}
 }
 function buildTriFace(k, a, b, c) {
@@ -3479,8 +3496,9 @@ function buildTriFace(k, a, b, c) {
 function sewAndSolidify(k, Module, faces, tolerance) {
 	const vec = makeVecU32(Module, faces.map(unwrap));
 	try {
-		let sewn = k.sewAndSolidify(vec, tolerance);
-		sewn = k.fixFaceOrientations(sewn);
+		const sewn0 = k.sewAndSolidify(vec, tolerance);
+		const sewn = k.fixFaceOrientations(sewn0);
+		if (sewn !== sewn0) k.release(sewn0);
 		return handle("solid", sewn);
 	} finally {
 		vec.delete();

package/dist/operations.cjs

@@ -1,6 +1,6 @@
 Object.defineProperty(exports, Symbol.toStringTag, { value: "Module" });
-const require_threadFns = require("./threadFns-DwKNCMFx.cjs");
-const require_loftFns = require("./loftFns-BWaSzS-2.cjs");
+const require_threadFns = require("./threadFns-B6SQd48K.cjs");
+const require_loftFns = require("./loftFns-Be0OZxYM.cjs");
 exports.addChild = require_threadFns.addChild;
 exports.addJoint = require_threadFns.addJoint;
 exports.addStep = require_threadFns.addStep;

package/dist/operations.js

@@ -1,3 +1,3 @@
-import { A as setJointValue, B as createAssemblyNode, C as cylindricalJoint, D as planarJoint, E as mechanismDOF, G as circularPattern, H as removeChild, J as exportAssemblySTEP, K as gridPattern, L as addChild, M as sphericalJoint, O as prismaticJoint, R as collectShapes, S as addJoint, T as jointTransform, U as updateNode, V as findNode, W as walkAssembly, Y as createAssembly, _ as exportURDF, b as inverseKinematics, c as modifyStep, d as replayFrom, f as replayHistory, g as undoLast, h as stepsFrom, i as createRegistry, j as setJointValues, k as revoluteJoint, l as registerOperation, m as stepCount, n as addStep, o as findStep, q as linearPattern, r as createHistory, s as getShape, t as thread, u as registerShape, v as importURDF, w as forwardKinematics, x as jointTrajectory, y as jointsFromDH, z as countNodes } from "./threadFns-BKQNkgT6.js";
-import { d as twistExtrude, l as supportExtrude, o as complexExtrude, u as sweep } from "./loftFns-DpQTJQgv.js";
+import { A as setJointValue, B as createAssemblyNode, C as cylindricalJoint, D as planarJoint, E as mechanismDOF, G as circularPattern, H as removeChild, J as exportAssemblySTEP, K as gridPattern, L as addChild, M as sphericalJoint, O as prismaticJoint, R as collectShapes, S as addJoint, T as jointTransform, U as updateNode, V as findNode, W as walkAssembly, Y as createAssembly, _ as exportURDF, b as inverseKinematics, c as modifyStep, d as replayFrom, f as replayHistory, g as undoLast, h as stepsFrom, i as createRegistry, j as setJointValues, k as revoluteJoint, l as registerOperation, m as stepCount, n as addStep, o as findStep, q as linearPattern, r as createHistory, s as getShape, t as thread, u as registerShape, v as importURDF, w as forwardKinematics, x as jointTrajectory, y as jointsFromDH, z as countNodes } from "./threadFns-G71HVwW7.js";
+import { d as twistExtrude, l as supportExtrude, o as complexExtrude, u as sweep } from "./loftFns-DxJAP4Qv.js";
 export { addChild, addJoint, addStep, circularPattern, collectShapes, complexExtrude, countNodes, createAssembly, createAssemblyNode, createHistory, createRegistry, cylindricalJoint, exportAssemblySTEP, exportURDF, findNode, findStep, forwardKinematics, getShape as getHistoryShape, gridPattern, importURDF, inverseKinematics, jointTrajectory, jointTransform, jointsFromDH, linearPattern, mechanismDOF, modifyStep, planarJoint, prismaticJoint, registerOperation, registerShape, removeChild, replayFrom, replayHistory, revoluteJoint, setJointValue, setJointValues, sphericalJoint, stepCount, stepsFrom, supportExtrude, sweep, thread, twistExtrude, undoLast, updateNode, walkAssembly };

package/dist/{primitiveFns-uXoHZuh9.js → primitiveFns-1otQpjcN.js}

@@ -1,9 +1,9 @@
-import { E as isClosedWire, nt as getKernel, u as createSolid } from "./shapeTypes-BtEERwGK.js";
+import { E as isClosedWire, et as _usingCtx, nt as getKernel, u as createSolid } from "./shapeTypes-BalkiKtK.js";
 import { A as ok, b as err, d as validationError, v as andThen } from "./errors-DNWJsfVU.js";
 import { t as DEG2RAD } from "./constants-ITRzCnCp.js";
-import { g as translate } from "./shapeFns-CpopWo8-.js";
-import { _ as makeThreePointArc, a as makeNonPlanarFace, c as makeBSplineApproximation, d as makeCircle, f as makeEllipse, g as makeTangentArc, h as makeLine, i as makeNewFaceWithinFace, m as makeHelix, o as makePolygon, p as makeEllipseArc, r as makeFace, s as assembleWire, t as addHolesInFace, u as makeBezierCurve } from "./surfaceBuilders-Co91_Kh7.js";
-import { a as makeOffset, c as makeTorus, i as makeEllipsoid, l as makeVertex, n as makeCone, o as makeSolid, r as makeCylinder, s as makeSphere, t as makeCompound, u as weldShellsAndFaces } from "./solidBuilders-BRva7VpY.js";
+import { g as translate } from "./shapeFns-Gzaax25v.js";
+import { _ as makeThreePointArc, a as makeNonPlanarFace, c as makeBSplineApproximation, d as makeCircle, f as makeEllipse, g as makeTangentArc, h as makeLine, i as makeNewFaceWithinFace, m as makeHelix, o as makePolygon, p as makeEllipseArc, r as makeFace, s as assembleWire, t as addHolesInFace, u as makeBezierCurve } from "./surfaceBuilders-HAF4Xtow.js";
+import { a as makeOffset, c as makeTorus, i as makeEllipsoid, l as makeVertex, n as makeCone, o as makeSolid, r as makeCylinder, s as makeSphere, t as makeCompound, u as weldShellsAndFaces } from "./solidBuilders-CgEPRock.js";
 //#region src/topology/primitiveFns.ts
 /**
 * Create a box with the given dimensions.
@@ -19,11 +19,18 @@ function box(width, depth, height, options) {
 		0,
 		0
 	] : void 0);
-	if (center) return translate(solid, [
-		center[0] - width / 2,
-		center[1] - depth / 2,
-		center[2] - height / 2
-	]);
+	if (center) try {
+		var _usingCtx$1 = _usingCtx();
+		return translate(_usingCtx$1.u(solid), [
+			center[0] - width / 2,
+			center[1] - depth / 2,
+			center[2] - height / 2
+		]);
+	} catch (_) {
+		_usingCtx$1.e = _;
+	} finally {
+		_usingCtx$1.d();
+	}
 	return solid;
 }
 /**
@@ -40,14 +47,19 @@ function cylinder(radius, height, options) {
 		0,
 		1
 	];
-	let solid = makeCylinder(radius, height, at, axis);
-	if (options?.centered) {
+	const solid = makeCylinder(radius, height, at, axis);
+	if (options?.centered) try {
+		var _usingCtx3 = _usingCtx();
 		const halfShift = [
 			-axis[0] * height * .5,
 			-axis[1] * height * .5,
 			-axis[2] * height * .5
 		];
-		solid = translate(solid, halfShift);
+		return translate(_usingCtx3.u(solid), halfShift);
+	} catch (_) {
+		_usingCtx3.e = _;
+	} finally {
+		_usingCtx3.d();
 	}
 	return solid;
 }
@@ -55,8 +67,15 @@ function cylinder(radius, height, options) {
 * Create a sphere with the given radius.
 */
 function sphere(radius, options) {
-	let solid = makeSphere(radius);
-	if (options?.at) solid = translate(solid, options.at);
+	const solid = makeSphere(radius);
+	if (options?.at) try {
+		var _usingCtx4 = _usingCtx();
+		return translate(_usingCtx4.u(solid), options.at);
+	} catch (_) {
+		_usingCtx4.e = _;
+	} finally {
+		_usingCtx4.d();
+	}
 	return solid;
 }
 /**
@@ -77,14 +96,19 @@ function cone(bottomRadius, topRadius, height, options) {
 		0,
 		1
 	];
-	let solid = makeCone(bottomRadius, topRadius, height, at, axis);
-	if (options?.centered) {
+	const solid = makeCone(bottomRadius, topRadius, height, at, axis);
+	if (options?.centered) try {
+		var _usingCtx5 = _usingCtx();
 		const halfShift = [
 			-axis[0] * height * .5,
 			-axis[1] * height * .5,
 			-axis[2] * height * .5
 		];
-		solid = translate(solid, halfShift);
+		return translate(_usingCtx5.u(solid), halfShift);
+	} catch (_) {
+		_usingCtx5.e = _;
+	} finally {
+		_usingCtx5.d();
 	}
 	return solid;
 }
@@ -110,8 +134,15 @@ function torus(majorRadius, minorRadius, options) {
 * @param rz - Half-length along Z.
 */
 function ellipsoid(rx, ry, rz, options) {
-	let solid = makeEllipsoid(rx, ry, rz);
-	if (options?.at) solid = translate(solid, options.at);
+	const solid = makeEllipsoid(rx, ry, rz);
+	if (options?.at) try {
+		var _usingCtx6 = _usingCtx();
+		return translate(_usingCtx6.u(solid), options.at);
+	} catch (_) {
+		_usingCtx6.e = _;
+	} finally {
+		_usingCtx6.d();
+	}
 	return solid;
 }
 /** Create a straight edge between two 3D points. */

package/dist/{primitiveFns-D0k3Absh.cjs → primitiveFns-DZkzMLUq.cjs}

@@ -1,9 +1,9 @@
-const require_shapeTypes = require("./shapeTypes-BsJXkU8g.cjs");
+const require_shapeTypes = require("./shapeTypes-C4gRoPYX.cjs");
 const require_errors = require("./errors-CXJtc4I7.cjs");
 const require_constants = require("./constants-BOVyEYGH.cjs");
-const require_shapeFns = require("./shapeFns-CQVLaU7u.cjs");
-const require_surfaceBuilders = require("./surfaceBuilders-On9uTEBH.cjs");
-const require_solidBuilders = require("./solidBuilders-t7TnJXqT.cjs");
+const require_shapeFns = require("./shapeFns-m5OBBpM4.cjs");
+const require_surfaceBuilders = require("./surfaceBuilders-DWHDogVL.cjs");
+const require_solidBuilders = require("./solidBuilders-CHzmSo67.cjs");
 //#region src/topology/primitiveFns.ts
 /**
 * Create a box with the given dimensions.
@@ -19,11 +19,18 @@ function box(width, depth, height, options) {
 		0,
 		0
 	] : void 0);
-	if (center) return require_shapeFns.translate(solid, [
-		center[0] - width / 2,
-		center[1] - depth / 2,
-		center[2] - height / 2
-	]);
+	if (center) try {
+		var _usingCtx$1 = require_shapeTypes._usingCtx();
+		return require_shapeFns.translate(_usingCtx$1.u(solid), [
+			center[0] - width / 2,
+			center[1] - depth / 2,
+			center[2] - height / 2
+		]);
+	} catch (_) {
+		_usingCtx$1.e = _;
+	} finally {
+		_usingCtx$1.d();
+	}
 	return solid;
 }
 /**
@@ -40,14 +47,19 @@ function cylinder(radius, height, options) {
 		0,
 		1
 	];
-	let solid = require_solidBuilders.makeCylinder(radius, height, at, axis);
-	if (options?.centered) {
+	const solid = require_solidBuilders.makeCylinder(radius, height, at, axis);
+	if (options?.centered) try {
+		var _usingCtx3 = require_shapeTypes._usingCtx();
 		const halfShift = [
 			-axis[0] * height * .5,
 			-axis[1] * height * .5,
 			-axis[2] * height * .5
 		];
-		solid = require_shapeFns.translate(solid, halfShift);
+		return require_shapeFns.translate(_usingCtx3.u(solid), halfShift);
+	} catch (_) {
+		_usingCtx3.e = _;
+	} finally {
+		_usingCtx3.d();
 	}
 	return solid;
 }
@@ -55,8 +67,15 @@ function cylinder(radius, height, options) {
 * Create a sphere with the given radius.
 */
 function sphere(radius, options) {
-	let solid = require_solidBuilders.makeSphere(radius);
-	if (options?.at) solid = require_shapeFns.translate(solid, options.at);
+	const solid = require_solidBuilders.makeSphere(radius);
+	if (options?.at) try {
+		var _usingCtx4 = require_shapeTypes._usingCtx();
+		return require_shapeFns.translate(_usingCtx4.u(solid), options.at);
+	} catch (_) {
+		_usingCtx4.e = _;
+	} finally {
+		_usingCtx4.d();
+	}
 	return solid;
 }
 /**
@@ -77,14 +96,19 @@ function cone(bottomRadius, topRadius, height, options) {
 		0,
 		1
 	];
-	let solid = require_solidBuilders.makeCone(bottomRadius, topRadius, height, at, axis);
-	if (options?.centered) {
+	const solid = require_solidBuilders.makeCone(bottomRadius, topRadius, height, at, axis);
+	if (options?.centered) try {
+		var _usingCtx5 = require_shapeTypes._usingCtx();
 		const halfShift = [
 			-axis[0] * height * .5,
 			-axis[1] * height * .5,
 			-axis[2] * height * .5
 		];
-		solid = require_shapeFns.translate(solid, halfShift);
+		return require_shapeFns.translate(_usingCtx5.u(solid), halfShift);
+	} catch (_) {
+		_usingCtx5.e = _;
+	} finally {
+		_usingCtx5.d();
 	}
 	return solid;
 }
@@ -110,8 +134,15 @@ function torus(majorRadius, minorRadius, options) {
 * @param rz - Half-length along Z.
 */
 function ellipsoid(rx, ry, rz, options) {
-	let solid = require_solidBuilders.makeEllipsoid(rx, ry, rz);
-	if (options?.at) solid = require_shapeFns.translate(solid, options.at);
+	const solid = require_solidBuilders.makeEllipsoid(rx, ry, rz);
+	if (options?.at) try {
+		var _usingCtx6 = require_shapeTypes._usingCtx();
+		return require_shapeFns.translate(_usingCtx6.u(solid), options.at);
+	} catch (_) {
+		_usingCtx6.e = _;
+	} finally {
+		_usingCtx6.d();
+	}
 	return solid;
 }
 /** Create a straight edge between two 3D points. */

package/dist/projection.cjs

@@ -1,5 +1,5 @@
 Object.defineProperty(exports, Symbol.toStringTag, { value: "Module" });
-const require_cameraFns = require("./cameraFns-CaG1cMFg.cjs");
+const require_cameraFns = require("./cameraFns-CiGOarQ4.cjs");
 exports.PROJECTION_PLANES = require_cameraFns.PROJECTION_PLANES;
 exports.cameraFromPlane = require_cameraFns.cameraFromPlane;
 exports.cameraLookAt = require_cameraFns.cameraLookAt;

package/dist/projection.js

@@ -1,2 +1,2 @@
-import { a as makeProjectedEdges, i as projectEdges, n as cameraLookAt, o as PROJECTION_PLANES, r as createCamera, s as isProjectionPlane, t as cameraFromPlane } from "./cameraFns-B1P5WTCI.js";
+import { a as makeProjectedEdges, i as projectEdges, n as cameraLookAt, o as PROJECTION_PLANES, r as createCamera, s as isProjectionPlane, t as cameraFromPlane } from "./cameraFns-MViqtlSh.js";
 export { PROJECTION_PLANES, cameraFromPlane, cameraLookAt, createCamera, isProjectionPlane, makeProjectedEdges, projectEdges };

package/dist/query.cjs

@@ -1,6 +1,6 @@
 Object.defineProperty(exports, Symbol.toStringTag, { value: "Module" });
-const require_helpers = require("./helpers-DVMbGdiy.cjs");
-const require_cornerFinder = require("./cornerFinder-Ivo7aISl.cjs");
+const require_helpers = require("./helpers-D0be4TzF.cjs");
+const require_cornerFinder = require("./cornerFinder-Bss_mZV9.cjs");
 exports.cornerFinder = require_cornerFinder.cornerFinder;
 exports.edgeFinder = require_helpers.edgeFinder;
 exports.faceFinder = require_helpers.faceFinder;

package/dist/query.js

@@ -1,3 +1,3 @@
-import { n as edgeFinder, r as faceFinder, t as getSingleFace } from "./helpers-XUoXaD5D.js";
-import { t as cornerFinder } from "./cornerFinder-BZqos_kQ.js";
+import { n as edgeFinder, r as faceFinder, t as getSingleFace } from "./helpers-zVYq0h_A.js";
+import { t as cornerFinder } from "./cornerFinder-BEe90gzY.js";
 export { cornerFinder, edgeFinder, faceFinder, getSingleFace };

package/dist/{refResolveFns-C1DZyVnQ.cjs → refResolveFns-BLM5XlZR.cjs}

@@ -1,9 +1,9 @@
-const require_shapeTypes = require("./shapeTypes-BsJXkU8g.cjs");
-const require_topologyQueryFns = require("./topologyQueryFns-5vIsyp4r.cjs");
-const require_faceFns = require("./faceFns-RZFix5VU.cjs");
-const require_shapeFns = require("./shapeFns-CQVLaU7u.cjs");
-const require_measureFns = require("./measureFns-z1j5oyK6.cjs");
-const require_adjacencyFns = require("./adjacencyFns-BaiFeuKQ.cjs");
+const require_shapeTypes = require("./shapeTypes-C4gRoPYX.cjs");
+const require_topologyQueryFns = require("./topologyQueryFns-BzIV1jHw.cjs");
+const require_faceFns = require("./faceFns-BbmIuuFt.cjs");
+const require_shapeFns = require("./shapeFns-m5OBBpM4.cjs");
+const require_measureFns = require("./measureFns-cK6MSs6B.cjs");
+const require_adjacencyFns = require("./adjacencyFns-BdxIbZtR.cjs");
 //#region src/topology/shapeRef/scoring.ts
 /**
 * Default face scorer combining surface type, normal alignment, centroid proximity,

package/dist/{refResolveFns-CEs1EWWI.js → refResolveFns-_niAxNu8.js}

@@ -1,9 +1,9 @@
-import { a as castShapeWithKnownType, h as disposeTransientSubShape, nt as getKernel } from "./shapeTypes-BtEERwGK.js";
-import { S as vertexPosition, c as getFaces } from "./topologyQueryFns-BU41SCtU.js";
-import { i as faceGeomType, l as normalAt, r as faceCenter } from "./faceFns-Bkno2HCU.js";
-import { n as getHashCode } from "./shapeFns-CpopWo8-.js";
-import { n as measureArea, s as measureLength } from "./measureFns-D7FLzPAB.js";
-import { a as sharedEdges, i as facesOfVertex, o as verticesOfEdge, r as facesOfEdge, s as verticesOfFace, t as adjacentFaces } from "./adjacencyFns-CRqm5AS0.js";
+import { a as castShapeWithKnownType, h as disposeTransientSubShape, nt as getKernel } from "./shapeTypes-BalkiKtK.js";
+import { S as vertexPosition, c as getFaces } from "./topologyQueryFns-vDjZw1k2.js";
+import { i as faceGeomType, l as normalAt, r as faceCenter } from "./faceFns-ClvSac1T.js";
+import { n as getHashCode } from "./shapeFns-Gzaax25v.js";
+import { n as measureArea, s as measureLength } from "./measureFns-Bbgcgo9U.js";
+import { a as sharedEdges, i as facesOfVertex, o as verticesOfEdge, r as facesOfEdge, s as verticesOfFace, t as adjacentFaces } from "./adjacencyFns-qxeJWyj-.js";
 //#region src/topology/shapeRef/scoring.ts
 /**
 * Default face scorer combining surface type, normal alignment, centroid proximity,

package/dist/{shapeFns-CpopWo8-.js → shapeFns-Gzaax25v.js}

@@ -1,6 +1,6 @@
-import { nt as getKernel, t as castResultShape } from "./shapeTypes-BtEERwGK.js";
+import { nt as getKernel, t as castResultShape } from "./shapeTypes-BalkiKtK.js";
 import { A as ok, b as err, d as validationError, t as BrepErrorCode } from "./errors-DNWJsfVU.js";
-import { C as kernelCall, c as getFaces, l as getOrCreateCache, r as getCacheEntry, w as kernelCallRaw } from "./topologyQueryFns-BU41SCtU.js";
+import { C as kernelCall, c as getFaces, l as getOrCreateCache, r as getCacheEntry, w as kernelCallRaw } from "./topologyQueryFns-vDjZw1k2.js";
 import { n as HASH_CODE_MAX, t as DEG2RAD } from "./constants-ITRzCnCp.js";
 //#region src/topology/metadata/originTrackingFns.ts
 /**

package/dist/{shapeFns-CQVLaU7u.cjs → shapeFns-m5OBBpM4.cjs}

@@ -1,6 +1,6 @@
-const require_shapeTypes = require("./shapeTypes-BsJXkU8g.cjs");
+const require_shapeTypes = require("./shapeTypes-C4gRoPYX.cjs");
 const require_errors = require("./errors-CXJtc4I7.cjs");
-const require_topologyQueryFns = require("./topologyQueryFns-5vIsyp4r.cjs");
+const require_topologyQueryFns = require("./topologyQueryFns-BzIV1jHw.cjs");
 const require_constants = require("./constants-BOVyEYGH.cjs");
 //#region src/topology/metadata/originTrackingFns.ts
 /**

package/dist/shapeRef.cjs

@@ -1,5 +1,5 @@
 Object.defineProperty(exports, Symbol.toStringTag, { value: "Module" });
-const require_refResolveFns = require("./refResolveFns-C1DZyVnQ.cjs");
+const require_refResolveFns = require("./refResolveFns-BLM5XlZR.cjs");
 exports.assignRoles = require_refResolveFns.assignRoles;
 exports.captureHint = require_refResolveFns.captureHint;
 exports.createDerivedFaceRef = require_refResolveFns.createDerivedFaceRef;

package/dist/shapeRef.js

@@ -1,2 +1,2 @@
-import { _ as createRef, a as isVertexRef, b as defaultScorer, c as resolveRefParams, d as createVertexRef, f as resolveVertexRef, g as captureHint, h as assignRoles, i as isLineageRef, l as createDerivedFaceRef, m as resolveEdgeRef, n as isEdgeRef, o as resolveLineageRef, p as createEdgeRef, r as isFaceRef, s as resolveRefIn, t as isDerivedFaceRef, u as resolveDerivedFaceRef, v as resolveRef, y as updateRoles } from "./refResolveFns-CEs1EWWI.js";
+import { _ as createRef, a as isVertexRef, b as defaultScorer, c as resolveRefParams, d as createVertexRef, f as resolveVertexRef, g as captureHint, h as assignRoles, i as isLineageRef, l as createDerivedFaceRef, m as resolveEdgeRef, n as isEdgeRef, o as resolveLineageRef, p as createEdgeRef, r as isFaceRef, s as resolveRefIn, t as isDerivedFaceRef, u as resolveDerivedFaceRef, v as resolveRef, y as updateRoles } from "./refResolveFns-_niAxNu8.js";
 export { assignRoles, captureHint, createDerivedFaceRef, createEdgeRef, createRef, createVertexRef, defaultScorer, isDerivedFaceRef, isEdgeRef, isFaceRef, isLineageRef, isVertexRef, resolveDerivedFaceRef, resolveEdgeRef, resolveLineageRef, resolveRef, resolveRefIn, resolveRefParams, resolveVertexRef, updateRoles };

package/dist/{shapeTypes-BtEERwGK.js → shapeTypes-BalkiKtK.js}

@@ -1,4 +1,4 @@
-import { C as serializeCurve2d$2, E as quickHull, O as EXACT_BREP_CAPABILITIES, S as scaleCurve2d$2, T as translateCurve2d$2, _ as makeEllipse2d$2, a as buildBinarySTL, b as mirrorAtPoint, c as curveBounds, d as evaluateCurve2d$2, f as intersectCurves2dFn, g as makeCircle2d$2, h as makeBezier2d$2, i as buildAsciiSTL, l as curveTypeName, m as makeArc2dThreePoints, n as DEFAULT_STL_ANGULAR_TOLERANCE, o as addCurveToBBox, p as makeArc2dTangent, r as DEFAULT_STL_TOLERANCE, s as createBBox2d, t as OcctWasmAdapter, u as deserializeCurve2d$2, v as makeLine2d$2, w as tangentCurve2d, x as rotateCurve2d$2, y as mirrorAcrossAxis } from "./occtWasmAdapter-nqo3wbVj.js";
+import { C as serializeCurve2d$2, E as quickHull, O as EXACT_BREP_CAPABILITIES, S as scaleCurve2d$2, T as translateCurve2d$2, _ as makeEllipse2d$2, a as buildBinarySTL, b as mirrorAtPoint, c as curveBounds, d as evaluateCurve2d$2, f as intersectCurves2dFn, g as makeCircle2d$2, h as makeBezier2d$2, i as buildAsciiSTL, l as curveTypeName, m as makeArc2dThreePoints, n as DEFAULT_STL_ANGULAR_TOLERANCE, o as addCurveToBBox, p as makeArc2dTangent, r as DEFAULT_STL_TOLERANCE, s as createBBox2d, t as OcctWasmAdapter, u as deserializeCurve2d$2, v as makeLine2d$2, w as tangentCurve2d, x as rotateCurve2d$2, y as mirrorAcrossAxis } from "./occtWasmAdapter-BgmRCYeD.js";
 import { n as wasmIndex, t as vec3At } from "./vec3-Dpha8d5k.js";
 import { A as ok, b as err } from "./errors-DNWJsfVU.js";
 //#region src/kernel/quality.ts
@@ -15710,7 +15710,9 @@ var DisposalScope = class {
 	register(resource) {
 		this.handles.push(() => {
 			try {
-				resource.delete();
+				const disposer = resource[Symbol.dispose];
+				if (typeof disposer === "function") disposer.call(resource);
+				else resource.delete();
 			} catch {}
 		});
 		return resource;

package/dist/{shapeTypes-BsJXkU8g.cjs → shapeTypes-C4gRoPYX.cjs}

@@ -1,4 +1,4 @@
-const require_occtWasmAdapter = require("./occtWasmAdapter-8wX1Z2-I.cjs");
+const require_occtWasmAdapter = require("./occtWasmAdapter-CWX5KCl8.cjs");
 const require_vec3 = require("./vec3-CFwOI0ZI.cjs");
 const require_errors = require("./errors-CXJtc4I7.cjs");
 //#region src/kernel/quality.ts
@@ -15718,7 +15718,9 @@ var DisposalScope = class {
 	register(resource) {
 		this.handles.push(() => {
 			try {
-				resource.delete();
+				const disposer = resource[Symbol.dispose];
+				if (typeof disposer === "function") disposer.call(resource);
+				else resource.delete();
 			} catch {}
 		});
 		return resource;

package/dist/sketching.cjs

@@ -1,7 +1,7 @@
 Object.defineProperty(exports, Symbol.toStringTag, { value: "Module" });
-const require_textBlueprints = require("./textBlueprints-BoFKAYI9.cjs");
-const require_blueprintSketcher = require("./blueprintSketcher-CW1MTtqe.cjs");
-const require_drawFns = require("./drawFns-BX8bt_LP.cjs");
+const require_textBlueprints = require("./textBlueprints-DgTBXc6O.cjs");
+const require_blueprintSketcher = require("./blueprintSketcher-DRGumaWR.cjs");
+const require_drawFns = require("./drawFns-DZHPT-nb.cjs");
 //#region src/sketching.ts
 /**
 * brepjs/sketching — Sketcher, Drawing, and sketch-to-shape operations.

package/dist/sketching.js

@@ -1,6 +1,6 @@
-import { n as BaseSketcher2d, t as BlueprintSketcher } from "./blueprintSketcher-DuNukkBb.js";
-import { A as sketchEllipse, C as DrawingPen, D as makeBaseBox, E as deserializeDrawing, F as sketchRectangle, I as sketchRoundedRectangle, L as FaceSketcher, M as sketchHelix, N as sketchParametricFunction, O as polysideInnerRadius, P as sketchPolysides, R as Sketcher, S as drawText, T as Drawing, _ as drawPolysides, a as drawingIntersect, b as drawSingleCircle, c as rotateDrawing, d as drawFaceOutline, f as drawProjection, g as drawPointsInterpolation, h as drawParametricFunction, i as drawingFuse, j as sketchFaceOffset, k as sketchCircle, l as scaleDrawing, m as drawEllipse, n as drawingCut, o as drawingToSketchOnPlane, p as drawCircle, r as drawingFillet, s as mirrorDrawing, t as drawingChamfer, u as translateDrawing, v as drawRectangle, w as draw, x as drawSingleEllipse, y as drawRoundedRectangle } from "./drawFns-BU7wz6Sh.js";
-import { a as Sketch, c as compoundSketchLoft, d as sketchFace, f as sketchLoft, h as sketchWires, i as Sketches, l as compoundSketchRevolve, m as sketchSweep, o as compoundSketchExtrude, p as sketchRevolve, s as compoundSketchFace, u as sketchExtrude, v as CompoundSketch } from "./textBlueprints-DdCJocI3.js";
+import { n as BaseSketcher2d, t as BlueprintSketcher } from "./blueprintSketcher-BIUHqWo9.js";
+import { A as sketchEllipse, C as DrawingPen, D as makeBaseBox, E as deserializeDrawing, F as sketchRectangle, I as sketchRoundedRectangle, L as FaceSketcher, M as sketchHelix, N as sketchParametricFunction, O as polysideInnerRadius, P as sketchPolysides, R as Sketcher, S as drawText, T as Drawing, _ as drawPolysides, a as drawingIntersect, b as drawSingleCircle, c as rotateDrawing, d as drawFaceOutline, f as drawProjection, g as drawPointsInterpolation, h as drawParametricFunction, i as drawingFuse, j as sketchFaceOffset, k as sketchCircle, l as scaleDrawing, m as drawEllipse, n as drawingCut, o as drawingToSketchOnPlane, p as drawCircle, r as drawingFillet, s as mirrorDrawing, t as drawingChamfer, u as translateDrawing, v as drawRectangle, w as draw, x as drawSingleEllipse, y as drawRoundedRectangle } from "./drawFns-CWfBvGiY.js";
+import { a as Sketch, c as compoundSketchLoft, d as sketchFace, f as sketchLoft, h as sketchWires, i as Sketches, l as compoundSketchRevolve, m as sketchSweep, o as compoundSketchExtrude, p as sketchRevolve, s as compoundSketchFace, u as sketchExtrude, v as CompoundSketch } from "./textBlueprints-CFPE5_QI.js";
 //#region src/sketching.ts
 /**
 * brepjs/sketching — Sketcher, Drawing, and sketch-to-shape operations.

package/dist/{solidBuilders-t7TnJXqT.cjs → solidBuilders-CHzmSo67.cjs}

@@ -1,13 +1,13 @@
-const require_shapeTypes = require("./shapeTypes-BsJXkU8g.cjs");
+const require_shapeTypes = require("./shapeTypes-C4gRoPYX.cjs");
 const require_errors = require("./errors-CXJtc4I7.cjs");
-const require_topologyQueryFns = require("./topologyQueryFns-5vIsyp4r.cjs");
+const require_topologyQueryFns = require("./topologyQueryFns-BzIV1jHw.cjs");
 const require_constants = require("./constants-BOVyEYGH.cjs");
 const require_vecOps = require("./vecOps-CCnJt-yH.cjs");
 const require_planeOps = require("./planeOps-BA4HfgQu.cjs");
-const require_faceFns = require("./faceFns-RZFix5VU.cjs");
-const require_shapeFns = require("./shapeFns-CQVLaU7u.cjs");
+const require_faceFns = require("./faceFns-BbmIuuFt.cjs");
+const require_shapeFns = require("./shapeFns-m5OBBpM4.cjs");
 const require_arrayAccess = require("./arrayAccess-e4H9cBfh.cjs");
-const require_surfaceBuilders = require("./surfaceBuilders-On9uTEBH.cjs");
+const require_surfaceBuilders = require("./surfaceBuilders-DWHDogVL.cjs");
 //#region src/topology/booleanFns.ts
 /**
 * Boolean and compound operations — functional replacements for _3DShape boolean methods.
@@ -215,8 +215,8 @@ function makeSectionFace(plane, size) {
 	];
 	const wire = kernel.makeWire(edges);
 	const face = kernel.makeFace(wire, true);
-	for (const e of edges) e.delete();
-	wire.delete();
+	for (const e of edges) kernel.dispose(e);
+	kernel.dispose(wire);
 	return face;
 }
 /**
@@ -242,7 +242,7 @@ function section(shape, plane, { approximation = true, planeSize = 1e4 } = {}) {
 			plane: planeName
 		}, "The cutting plane may not intersect the shape. Verify plane position relative to shape bounds."));
 	} finally {
-		sectionFace.delete();
+		require_shapeTypes.getKernel().dispose(sectionFace);
 	}
 }
 /**

package/dist/{solidBuilders-BRva7VpY.js → solidBuilders-CgEPRock.js}

@@ -1,13 +1,13 @@
-import { L as getShapeKind, S as isSolid, b as isShape3D, d as createVertex, m as disposeResultShape, nt as getKernel, o as createCompound, p as disposeDowncastSource, r as castShape, t as castResultShape, u as createSolid, x as isShell } from "./shapeTypes-BtEERwGK.js";
+import { L as getShapeKind, S as isSolid, b as isShape3D, d as createVertex, m as disposeResultShape, nt as getKernel, o as createCompound, p as disposeDowncastSource, r as castShape, t as castResultShape, u as createSolid, x as isShell } from "./shapeTypes-BalkiKtK.js";
 import { A as ok, R as unwrap, b as err, d as validationError, i as kernelError, l as typeCastError, t as BrepErrorCode, v as andThen, w as isErr } from "./errors-DNWJsfVU.js";
-import { f as getVertices, p as getWires, s as getEdges } from "./topologyQueryFns-BU41SCtU.js";
+import { f as getVertices, p as getWires, s as getEdges } from "./topologyQueryFns-vDjZw1k2.js";
 import { n as HASH_CODE_MAX } from "./constants-ITRzCnCp.js";
 import { h as vecScale, t as vecAdd } from "./vecOps-SKPRvPH-.js";
 import { o as resolvePlane } from "./planeOps-DSjjtrjg.js";
-import { _ as cast, y as downcast } from "./faceFns-Bkno2HCU.js";
-import { _ as collectInputFaceHashes, b as propagateMetadataByHash, y as propagateAllMetadata } from "./shapeFns-CpopWo8-.js";
+import { _ as cast, y as downcast } from "./faceFns-ClvSac1T.js";
+import { _ as collectInputFaceHashes, b as propagateMetadataByHash, y as propagateAllMetadata } from "./shapeFns-Gzaax25v.js";
 import { n as getAtOrThrow, t as firstOrThrow } from "./arrayAccess-DrUGPADn.js";
-import { r as makeFace } from "./surfaceBuilders-Co91_Kh7.js";
+import { r as makeFace } from "./surfaceBuilders-HAF4Xtow.js";
 //#region src/topology/booleanFns.ts
 /**
 * Boolean and compound operations — functional replacements for _3DShape boolean methods.
@@ -215,8 +215,8 @@ function makeSectionFace(plane, size) {
 	];
 	const wire = kernel.makeWire(edges);
 	const face = kernel.makeFace(wire, true);
-	for (const e of edges) e.delete();
-	wire.delete();
+	for (const e of edges) kernel.dispose(e);
+	kernel.dispose(wire);
 	return face;
 }
 /**
@@ -242,7 +242,7 @@ function section(shape, plane, { approximation = true, planeSize = 1e4 } = {}) {
 			plane: planeName
 		}, "The cutting plane may not intersect the shape. Verify plane position relative to shape bounds."));
 	} finally {
-		sectionFace.delete();
+		getKernel().dispose(sectionFace);
 	}
 }
 /**