brepjs 18.104.0 → 18.106.0

package/dist/brepjs.cjs

@@ -12,11 +12,11 @@ const require_planeOps = require("./planeOps-BA4HfgQu.cjs");
 const require_faceFns = require("./faceFns-DKg2St8b.cjs");
 const require_shapeFns = require("./shapeFns-L4a8kH_A.cjs");
 const require_curveFns = require("./curveFns-Dx7_wMut.cjs");
-const require_meshFns = require("./meshFns-DeKdpmu7.cjs");
+const require_meshFns = require("./meshFns-DNDsv2vH.cjs");
 const require_arrayAccess = require("./arrayAccess-e4H9cBfh.cjs");
 const require_surfaceBuilders = require("./surfaceBuilders-FLnYYA70.cjs");
 const require_solidBuilders = require("./solidBuilders-CgRmJEdn.cjs");
-const require_healingFns = require("./healingFns-CM5mVMow.cjs");
+const require_healingFns = require("./healingFns-OL0bBSSY.cjs");
 const require_threadFns = require("./threadFns-DGYdomjN.cjs");
 const require_blueprintSketcher = require("./blueprintSketcher-DCttG3KS.cjs");
 const require_helpers = require("./helpers-8zxf2gkc.cjs");
@@ -30,7 +30,7 @@ const require_loftFns = require("./loftFns-DaRDYpfB.cjs");
 const require_cameraFns = require("./cameraFns-S7YbAxfg.cjs");
 const require_textMetrics = require("./textMetrics-W-H6jUDj.cjs");
 const require_shapeRefFns = require("./shapeRefFns-Dij41NuC.cjs");
-const require_workerPool = require("./workerPool-edtPrfHM.cjs");
+const require_workerPool = require("./workerPool-D30NsiIW.cjs");
 const require_primitiveFns = require("./primitiveFns-BAWtMd9H.cjs");
 //#region src/topology/shapeBooleans.ts
 var BOPAlgo_GlueShift = 1;
@@ -7008,6 +7008,7 @@ Object.defineProperty(exports, "io", {
 exports.ioError = require_errors.ioError;
 exports.is2D = require_shapeTypes.is2D;
 exports.is3D = require_shapeTypes.is3D;
+exports.isBatchRequest = require_workerPool.isBatchRequest;
 exports.isChamferRadius = isChamferRadius;
 exports.isClosedWire = require_shapeTypes.isClosedWire;
 exports.isCompSolid = require_faceFns.isCompSolid;
@@ -7096,6 +7097,7 @@ Object.defineProperty(exports, "measurement", {
 exports.mechanismDOF = require_threadFns.mechanismDOF;
 exports.mesh = mesh;
 exports.meshEdges = meshEdges;
+exports.meshLODs = require_meshFns.meshLODs;
 exports.meshMultiLOD = require_meshFns.meshMultiLOD;
 exports.minkowski = minkowski;
 exports.mirror = mirror;
@@ -7275,6 +7277,7 @@ exports.toBufferGeometryData = require_healingFns.toBufferGeometryData;
 exports.toGroupedBufferGeometryData = require_healingFns.toGroupedBufferGeometryData;
 exports.toKernelVec = toKernelVec;
 exports.toLODGeometryData = require_healingFns.toLODGeometryData;
+exports.toLODGeometryLevels = require_healingFns.toLODGeometryLevels;
 exports.toLineGeometryData = require_healingFns.toLineGeometryData;
 exports.toSVGPathD = require_blueprintFns.toSVGPathD;
 exports.toVec2 = require_types.toVec2;

package/dist/brepjs.js

@@ -10,11 +10,11 @@ import { i as pivotPlane, n as createPlane, o as resolvePlane, r as makePlane, s
 import { S as shapeType, _ as cast, a as faceOrientation, b as isCompSolid, c as innerWires, d as pointOnSurface, f as projectPointOnFace, g as asTopo, h as uvCoordinates, i as faceGeomType, l as normalAt, m as uvBounds, n as faceAxis, o as flipFaceOrientation, p as removeHolesFromFace, r as faceCenter, s as getSurfaceType, t as classifyPointOnFace, u as outerWire, v as downcast, x as iterTopo, y as fromBREP } from "./faceFns-mo4ThIHz.js";
 import { C as findFacesByTag, D as tagFaces, E as setTagMetadata, O as getFaceOrigins, S as getShapeColor, T as getTagMetadata, a as isSameShape, b as colorShape, c as applyMatrix$1, d as resize, f as rotate$2, h as translate$2, i as isEqualShape, k as setShapeOrigin, l as composeTransforms, m as transformCopy$1, n as getHashCode, o as simplify$1, p as scale$3, r as isEmpty$2, s as toBREP$1, t as clone$1, u as mirror$2, w as getFaceTags, x as getFaceColor, y as colorFaces } from "./shapeFns-DyBbhU30.js";
 import { a as curveIsPeriodic, c as curvePointAt, d as flipOrientation, f as getCurveType, h as offsetWire2D, i as curveIsClosed, l as curveStartPoint, m as interpolateCurve, n as curveAxis, o as curveLength, p as getOrientation, r as curveEndPoint, s as curvePeriod, t as approximateCurve, u as curveTangentAt } from "./curveFns-CG05Jygr.js";
-import { a as meshEdges$1, c as createMeshCache, i as mesh$1, n as exportSTEP, o as meshMultiLOD, r as exportSTL, s as clearMeshCache, t as exportIGES } from "./meshFns-CAAarhVm.js";
+import { a as meshEdges$1, c as clearMeshCache, i as mesh$1, l as createMeshCache, n as exportSTEP, o as meshLODs, r as exportSTL, s as meshMultiLOD, t as exportIGES } from "./meshFns-DoVH8EPW.js";
 import { n as getAtOrThrow, r as lastOrThrow, t as firstOrThrow } from "./arrayAccess-DrUGPADn.js";
 import { _ as makeThreePointArc, d as makeCircle, h as makeLine, l as makeBSplineInterpolation, n as fill, r as makeFace, s as assembleWire } from "./surfaceBuilders-Bww4jhBo.js";
 import { _ as section$1, b as split$1, d as booleanPipeline, f as cut$2, g as intersect$2, h as fuseAll$2, m as fuse$2, p as cutAll$2, r as makeCylinder, t as makeCompound, v as sectionToFace$1, y as slice$1 } from "./solidBuilders-Biwv2cW3.js";
-import { A as edgesOfFace, C as shellWithEvolution, D as getNurbsCurveData, E as fuseAllBisect, F as chamferDistAngle, I as toBufferGeometryData, L as toGroupedBufferGeometryData, M as sharedEdges, N as verticesOfEdge, O as getNurbsSurfaceData, P as wiresOfFace, R as toLODGeometryData, S as intersectWithEvolution, T as cutAllBisect, _ as positionOnCurve, a as healFace, b as filletWithEvolution, c as isValid$1, d as draft$1, f as fillet$1, g as variableFillet, h as thicken$1, i as heal$1, j as facesOfEdge, k as adjacentFaces, l as solidFromShell, m as shell$1, n as fixSelfIntersection, o as healSolid, p as offset$1, r as fixShape, s as healWire, t as autoHeal, u as chamfer$1, v as chamferWithEvolution, w as checkBoolean, x as fuseWithEvolution, y as cutWithEvolution, z as toLineGeometryData } from "./healingFns-Bb3eEBNm.js";
+import { A as edgesOfFace, B as toLineGeometryData, C as shellWithEvolution, D as getNurbsCurveData, E as fuseAllBisect, F as chamferDistAngle, I as toBufferGeometryData, L as toGroupedBufferGeometryData, M as sharedEdges, N as verticesOfEdge, O as getNurbsSurfaceData, P as wiresOfFace, R as toLODGeometryData, S as intersectWithEvolution, T as cutAllBisect, _ as positionOnCurve, a as healFace, b as filletWithEvolution, c as isValid$1, d as draft$1, f as fillet$1, g as variableFillet, h as thicken$1, i as heal$1, j as facesOfEdge, k as adjacentFaces, l as solidFromShell, m as shell$1, n as fixSelfIntersection, o as healSolid, p as offset$1, r as fixShape, s as healWire, t as autoHeal, u as chamfer$1, v as chamferWithEvolution, w as checkBoolean, x as fuseWithEvolution, y as cutWithEvolution, z as toLODGeometryLevels } from "./healingFns-C5AomW4j.js";
 import { A as setJointValue, B as findNode, C as cylindricalJoint, D as planarJoint, E as mechanismDOF, F as quatRotate, G as gridPattern, H as updateNode, I as addChild, J as createAssembly, K as linearPattern, L as collectShapes, M as sphericalJoint, N as quatFromAxisAngle, O as prismaticJoint, P as quatFromTo, R as countNodes, S as addJoint, T as jointTransform, U as walkAssembly, V as removeChild, W as circularPattern, _ as exportURDF, a as deserializeHistory, b as inverseKinematics, c as modifyStep, d as replayFrom, f as replayHistory, g as undoLast, h as stepsFrom, i as createRegistry, j as setJointValues, k as revoluteJoint, l as registerOperation, m as stepCount, n as addStep, o as findStep, p as serializeHistory, q as exportAssemblySTEP, r as createHistory, s as getShape, t as thread, u as registerShape, v as importURDF, w as forwardKinematics, x as jointTrajectory, y as jointsFromDH, z as createAssemblyNode } from "./threadFns-8rKpQXiR.js";
 import { n as BaseSketcher2d, r as organiseBlueprints, t as BlueprintSketcher } from "./blueprintSketcher-CEQ8s7TD.js";
 import { a as createTypedFinder, i as wireFinder, n as edgeFinder, r as faceFinder, t as getSingleFace } from "./helpers-DT44wBAD.js";
@@ -29,7 +29,7 @@ import { a as Sketch, c as compoundSketchLoft, d as sketchFace, f as sketchLoft,
 import { a as makeProjectedEdges, i as projectEdges, n as cameraLookAt, r as createCamera, s as isProjectionPlane, t as cameraFromPlane } from "./cameraFns-Bu6jgTKc.js";
 import { n as textMetrics, r as sketchText, t as fontMetrics } from "./textMetrics-CBbDQ5QW.js";
 import { a as updateRoles, i as resolveRef, n as captureHint, o as defaultScorer, r as createRef, t as assignRoles } from "./shapeRefFns-Cn4WNb3q.js";
-import { a as createWorkerClient, c as enqueueTask, d as rejectAll, f as isDisposeRequest, g as isSuccessResponse, h as isOperationRequest, i as registerHandler, l as isEmpty$1, m as isInitRequest, n as createOperationRegistry, o as createTaskQueue, p as isErrorResponse, r as createWorkerHandler, s as dequeueTask, t as createWorkerPool, u as pendingCount } from "./workerPool-BxBKpKeI.js";
+import { _ as isSuccessResponse, a as createWorkerClient, c as enqueueTask, d as rejectAll, f as isBatchRequest, g as isOperationRequest, h as isInitRequest, i as registerHandler, l as isEmpty$1, m as isErrorResponse, n as createOperationRegistry, o as createTaskQueue, p as isDisposeRequest, r as createWorkerHandler, s as dequeueTask, t as createWorkerPool, u as pendingCount } from "./workerPool-XcYX2UZ0.js";
 import { C as threePointArc, D as wireLoop, E as wire, S as tangentArc, T as vertex, _ as polygon, a as circle, b as sphere$1, c as cylinder, d as ellipsoid, f as face, g as offsetFace, h as line, i as bsplineApprox, l as ellipse, m as helix, n as bezier, o as compound, p as filledFace, r as box, s as cone, t as addHoles, u as ellipseArc, v as sewShells, w as torus$1, x as subFace, y as solid } from "./primitiveFns-62SO4ti5.js";
 //#region \0rolldown/runtime.js
 var __defProp = Object.defineProperty;
@@ -6702,4 +6702,4 @@ var csg_exports = /* @__PURE__ */ __exportAll({
 	withEvaluator: () => withEvaluator
 });
 //#endregion
-export { BaseSketcher2d, BlueprintSketcher, BrepBugError, BrepErrorCode, BrepWrapperError, BrepkitAdapter, CompoundSketch, DEFAULT_CAPABILITIES, DEG2RAD, DisposalScope, EXACT_BREP_CAPABILITIES, FaceSketcher, HASH_CODE_MAX, OK, OcctWasmAdapter, RAD2DEG, Sketch, Sketcher, Sketches, addChild, addHoles, addJoint, addMate, addStep, adjacentFaces, all, andThen, applyGlue, applyMatrix, approximateCurve, as2D, as3D, asTopo, assignRoles, autoHeal, bezier, blueprintToDXF, booleanPipeline, booleans_exports as booleans, boss, box, bsplineApprox, bug, cameraFromPlane, cameraLookAt, captureHint, cast, castShape, castShape3D, chamfer, chamferDistAngle as chamferDistAngleShape, chamferWithEvolution, checkAllInterferences, checkBoolean, checkInterference, circle, circularPattern, classifyPointOnFace, clearMeshCache, clone, closedWire, collect, collectShapes, colorFaces, colorShape, complexExtrude, composeTransforms, compound, compoundSketchExtrude, compoundSketchFace, compoundSketchLoft, compoundSketchRevolve, computationError, computeStraightSkeleton, cone, construction_exports as construction, convexHull, cornerFinder, countNodes, createAssembly, createAssemblyNode, createBlueprint, createCamera, createCompound, createCompoundBlueprint, createDistanceQuery, createEdge, createFace, createHandle, createHistory, createKernelHandle, createMeshCache, createNamedPlane, createOperationRegistry, createPlane, createRef, createRegistry, createShell, createSolid, createTaskQueue, createVertex, createWire, createWorkerClient, createWorkerHandler, createWorkerPool, csg_exports as csg, currentQuality, curve2dBoundingBox, curve2dDistanceFrom, curve2dFirstPoint, curve2dIsOnCurve, curve2dLastPoint, curve2dParameter, curve2dSplitAt, curve2dTangentAt, curveAxis, curveEndPoint, curveIsClosed, curveIsPeriodic, curveLength, curvePeriod, curvePointAt, curveStartPoint, curveTangentAt, cut, cut2D, cutAll, cutAllBisect, cutBlueprints, cutWithEvolution, cylinder, cylindricalJoint, defaultScorer, dequeueTask, describe, deserializeDrawing, deserializeHistory, fromBREP as deserializeShape, downcast, draft, draw, drawCircle, drawEllipse, drawFaceOutline, drawParametricFunction, drawPointsInterpolation, drawPolysides, drawProjection, drawRectangle, drawRoundedRectangle, drawSingleCircle, drawSingleEllipse, drawText, drawingChamfer, drawingCut, drawingFillet, drawingFuse, drawingIntersect, drawingToSketchOnPlane, drill, edgeFinder, edgesOfFace, ellipse, ellipseArc, ellipsoid, enqueueTask, err, exportAssemblySTEP, exportDXF, exportGlb, exportGltf, exportIGES, exportOBJ, exportSTEP, exportSTEPConfigured, exportSTL, exportThreeMF, exportURDF, extrude, extrudeAll, face, faceAxis, faceCenter, faceFinder, faceGeomType, faceOrientation, facesOfEdge, fieldBoolean, fieldContour, fieldOffset, fieldReinit, fieldShell, fill, filledFace, fillet, filletWithEvolution, findFacesByTag, findNode, findStep, fixSelfIntersection, fixShape, flatMap, flatten, flipFaceOrientation, flipOrientation, fontMetrics, forwardKinematics, fromBREP$1 as fromBREP, fromKernelDir, fromKernelPnt, fromKernelVec, fromNullable, fuse, fuse2D, fuseAll, fuseAllBisect, fuseBlueprints, fuseWithEvolution, gearGeometry, getActiveVoxelId, getBounds, getBounds2D, getCompSolids, getCurveType, getDisposalStats, getEdges, getFaceColor, getFaceOrigins, getFaceTags, getFaces, getFont, getHashCode, getShape as getHistoryShape, getKernel, getKernelCapabilities, getKernelTier, getNurbsCurveData, getNurbsSurfaceData, getOrientation, getOrientation2D, getPerformanceStats, getShapeColor, getShapeKind, getShells, getSingleFace, getSolids, getSurfaceType, getTagMetadata, getVertices, getVoxel, getWires, gridPattern, guidedSweep, heal, healFace, healSolid, healWire, helix, hull, importDXF, importGLB, importIGES, importOBJ, importSTEP, importSTL, importSVG, importSVGPathD, importThreeMF, importURDF, init, initFromManifold, initFromOC, initVoxel, innerWires, instance, instanceCount, instanceGrid, instancedMesh, interpolateCurve, intersect, intersect2D, intersectBlueprints, intersectWithEvolution, invalidateShapeCache, inverseKinematics, ioNs_exports as io, ioError, is2D, is3D, isChamferRadius, isClosedWire, isCompSolid, isCompound, isDisposeRequest, isEdge, isEmpty, isEqualShape, isErr, isErrorResponse, isFace, isFilletRadius, isInitRequest, isInside2D, isInstanced, isLive, isManifoldShell, isNumber, isOk, isOperationRequest, isOrientedFace, isPlanarFace, isPlanarWire, isProjectionPlane, isEmpty$1 as isQueueEmpty, isSameShape, isShape1D, isShape3D, isShell, isSolid, isSuccessResponse, isValid, isValidSolid, isVertex, isWire, iterCompSolids, iterEdges, iterFaces, iterShells, iterSolids, iterTopo, iterVertices, iterWires, jointTrajectory, jointTransform, jointsFromDH, kernelCall, kernelCallRaw, kernelCallScoped, kernelError, latticeInfill, latticeInfillShape, line, linearPattern, loadFont, loft, loftAll, makeBaseBox, makeExternalGear, makeInternalGear, makePlane, makePlanetaryGear, makeProjectedEdges, manifoldShell, map, mapBoth, mapErr, match, materialize, measureArea, measureCurvatureAt, measureCurvatureAtMid, measureDistance, measureDistanceProps, measureLength, measureLinearProps, measureSurfaceProps, measureVolume, measureVolumeProps, measurement_exports as measurement, mechanismDOF, mesh, meshEdges, meshMultiLOD, minkowski, mirror, mirror2D, mirrorDrawing, mirrorJoin, modifiers_exports as modifiers, modifyStep, moduleInitError, multiSectionSweep, normalAt, offset, offsetFace, offsetMesh, offsetShape, offsetWire2D, ok, or, orElse, organiseBlueprints, orientedFace, outerWire, patterns_exports as patterns, pendingCount, pipeline, pivotPlane, planarFace, planarJoint, planarWire, planetPlacements, pocket, pointOnSurface, pointsInside, polygon, polyhedron, polysideInnerRadius, polysidesBlueprint, positionOnCurve, prewarm, primitives_exports as primitives, prismaticJoint, projectEdges, projectPointOnFace, query_exports as query, queryError, rectangularPattern, registerHandler, registerKernel, registerKernelTier, registerOperation, registerShape, registerVoxel, rejectAll, removeChild, removeHolesFromFace, repairMesh, replayFrom, replayHistory, resetDisposalStats, resetPerformanceStats, resize, resolve, resolve3D, resolveDirection, resolvePlane, resolveRef, reverseCurve, revoluteJoint, revolve, roof, rotate, rotate2D, rotateDrawing, roundedRectangleBlueprint, scale, scale2D, scaleDrawing, box$1 as sdfBox, capsule as sdfCapsule, cone$1 as sdfCone, cylinder$1 as sdfCylinder, fieldAxialRamp as sdfFieldAxialRamp, fieldClamp as sdfFieldClamp, fieldConst as sdfFieldConst, fieldFromSdf as sdfFieldFromSdf, fieldRadialRamp as sdfFieldRadialRamp, lattice as sdfLattice, plane as sdfPlane, roundedBox as sdfRoundedBox, sphere as sdfSphere, strutLattice as sdfStrutLattice, sweep as sdfSweep, torus as sdfTorus, section, sectionToFace, serializeHistory, setJointValue, setJointValues, setShapeOrigin, setTagMetadata, sewShells, shape, shapeToMeshInput, shapeType, sharedEdges, shell, shellMesh, shellShape, shellWithEvolution, simplify, sketchCircle, sketchEllipse, sketchExtrude, sketchFace, sketchFaceOffset, sketchHelix, sketchLoft, sketchOnFace2D, sketchOnPlane2D, sketchParametricFunction, sketchPolysides, sketchRectangle, sketchRevolve, sketchRoundedRectangle, sketchSweep, sketchText, sketchWires, sketcherStateError, slice, solid, solidFromShell, solveAssembly, sphere$1 as sphere, sphericalJoint, split, stepCount, stepsFrom, stretch2D, subFace, supportExtrude, supportsConstraintSketch, supportsProjection, surfaceFromGrid, surfaceFromImage, sweep$1 as sweep, tagFaces, tangentArc, tap, tapErr, textBlueprints, textMetrics, thicken, thread, threePointArc, toBREP, toBufferGeometryData, toGroupedBufferGeometryData, toKernelVec, toLODGeometryData, toLineGeometryData, toSVGPathD, toVec2, toVec3, torus$1 as torus, tpmsLattice, transformCopy, transforms_exports as transforms, translate, translate2D, translateDrawing, translatePlane, tryCatch, tryCatchAsync, twistExtrude, typeCastError, undoLast, unsupportedError, unwrap, unwrapErr, unwrapOr, unwrapOrElse, updateNode, updateRoles, uvBounds, uvCoordinates, validSolid, validatePlanetary, validationError, variableFillet, vecAdd, vecAngle, vecCross, vecDistance, vecDot, vecEquals, vecIsZero, vecLength, vecLengthSq, vecNegate, vecNormalize, vecProjectToPlane, vecRepr, vecRotate, vecScale, vecSub, vertex, vertexFinder, vertexPosition, verticesOfEdge, voxelBoolean, voxelBooleanField, voxelBooleanFieldShapes, voxelBooleanShapes, voxelField, voxelFieldFromShape, walkAssembly, windingNumbers, wire, wireFinder, wireLoop, wiresOfFace, withKernel, withKernelDir, withKernelPnt, withKernelVec, withQuality, withScope, withScopeResult, withScopeResultAsync, withTier, zip as zipResults };
+export { BaseSketcher2d, BlueprintSketcher, BrepBugError, BrepErrorCode, BrepWrapperError, BrepkitAdapter, CompoundSketch, DEFAULT_CAPABILITIES, DEG2RAD, DisposalScope, EXACT_BREP_CAPABILITIES, FaceSketcher, HASH_CODE_MAX, OK, OcctWasmAdapter, RAD2DEG, Sketch, Sketcher, Sketches, addChild, addHoles, addJoint, addMate, addStep, adjacentFaces, all, andThen, applyGlue, applyMatrix, approximateCurve, as2D, as3D, asTopo, assignRoles, autoHeal, bezier, blueprintToDXF, booleanPipeline, booleans_exports as booleans, boss, box, bsplineApprox, bug, cameraFromPlane, cameraLookAt, captureHint, cast, castShape, castShape3D, chamfer, chamferDistAngle as chamferDistAngleShape, chamferWithEvolution, checkAllInterferences, checkBoolean, checkInterference, circle, circularPattern, classifyPointOnFace, clearMeshCache, clone, closedWire, collect, collectShapes, colorFaces, colorShape, complexExtrude, composeTransforms, compound, compoundSketchExtrude, compoundSketchFace, compoundSketchLoft, compoundSketchRevolve, computationError, computeStraightSkeleton, cone, construction_exports as construction, convexHull, cornerFinder, countNodes, createAssembly, createAssemblyNode, createBlueprint, createCamera, createCompound, createCompoundBlueprint, createDistanceQuery, createEdge, createFace, createHandle, createHistory, createKernelHandle, createMeshCache, createNamedPlane, createOperationRegistry, createPlane, createRef, createRegistry, createShell, createSolid, createTaskQueue, createVertex, createWire, createWorkerClient, createWorkerHandler, createWorkerPool, csg_exports as csg, currentQuality, curve2dBoundingBox, curve2dDistanceFrom, curve2dFirstPoint, curve2dIsOnCurve, curve2dLastPoint, curve2dParameter, curve2dSplitAt, curve2dTangentAt, curveAxis, curveEndPoint, curveIsClosed, curveIsPeriodic, curveLength, curvePeriod, curvePointAt, curveStartPoint, curveTangentAt, cut, cut2D, cutAll, cutAllBisect, cutBlueprints, cutWithEvolution, cylinder, cylindricalJoint, defaultScorer, dequeueTask, describe, deserializeDrawing, deserializeHistory, fromBREP as deserializeShape, downcast, draft, draw, drawCircle, drawEllipse, drawFaceOutline, drawParametricFunction, drawPointsInterpolation, drawPolysides, drawProjection, drawRectangle, drawRoundedRectangle, drawSingleCircle, drawSingleEllipse, drawText, drawingChamfer, drawingCut, drawingFillet, drawingFuse, drawingIntersect, drawingToSketchOnPlane, drill, edgeFinder, edgesOfFace, ellipse, ellipseArc, ellipsoid, enqueueTask, err, exportAssemblySTEP, exportDXF, exportGlb, exportGltf, exportIGES, exportOBJ, exportSTEP, exportSTEPConfigured, exportSTL, exportThreeMF, exportURDF, extrude, extrudeAll, face, faceAxis, faceCenter, faceFinder, faceGeomType, faceOrientation, facesOfEdge, fieldBoolean, fieldContour, fieldOffset, fieldReinit, fieldShell, fill, filledFace, fillet, filletWithEvolution, findFacesByTag, findNode, findStep, fixSelfIntersection, fixShape, flatMap, flatten, flipFaceOrientation, flipOrientation, fontMetrics, forwardKinematics, fromBREP$1 as fromBREP, fromKernelDir, fromKernelPnt, fromKernelVec, fromNullable, fuse, fuse2D, fuseAll, fuseAllBisect, fuseBlueprints, fuseWithEvolution, gearGeometry, getActiveVoxelId, getBounds, getBounds2D, getCompSolids, getCurveType, getDisposalStats, getEdges, getFaceColor, getFaceOrigins, getFaceTags, getFaces, getFont, getHashCode, getShape as getHistoryShape, getKernel, getKernelCapabilities, getKernelTier, getNurbsCurveData, getNurbsSurfaceData, getOrientation, getOrientation2D, getPerformanceStats, getShapeColor, getShapeKind, getShells, getSingleFace, getSolids, getSurfaceType, getTagMetadata, getVertices, getVoxel, getWires, gridPattern, guidedSweep, heal, healFace, healSolid, healWire, helix, hull, importDXF, importGLB, importIGES, importOBJ, importSTEP, importSTL, importSVG, importSVGPathD, importThreeMF, importURDF, init, initFromManifold, initFromOC, initVoxel, innerWires, instance, instanceCount, instanceGrid, instancedMesh, interpolateCurve, intersect, intersect2D, intersectBlueprints, intersectWithEvolution, invalidateShapeCache, inverseKinematics, ioNs_exports as io, ioError, is2D, is3D, isBatchRequest, isChamferRadius, isClosedWire, isCompSolid, isCompound, isDisposeRequest, isEdge, isEmpty, isEqualShape, isErr, isErrorResponse, isFace, isFilletRadius, isInitRequest, isInside2D, isInstanced, isLive, isManifoldShell, isNumber, isOk, isOperationRequest, isOrientedFace, isPlanarFace, isPlanarWire, isProjectionPlane, isEmpty$1 as isQueueEmpty, isSameShape, isShape1D, isShape3D, isShell, isSolid, isSuccessResponse, isValid, isValidSolid, isVertex, isWire, iterCompSolids, iterEdges, iterFaces, iterShells, iterSolids, iterTopo, iterVertices, iterWires, jointTrajectory, jointTransform, jointsFromDH, kernelCall, kernelCallRaw, kernelCallScoped, kernelError, latticeInfill, latticeInfillShape, line, linearPattern, loadFont, loft, loftAll, makeBaseBox, makeExternalGear, makeInternalGear, makePlane, makePlanetaryGear, makeProjectedEdges, manifoldShell, map, mapBoth, mapErr, match, materialize, measureArea, measureCurvatureAt, measureCurvatureAtMid, measureDistance, measureDistanceProps, measureLength, measureLinearProps, measureSurfaceProps, measureVolume, measureVolumeProps, measurement_exports as measurement, mechanismDOF, mesh, meshEdges, meshLODs, meshMultiLOD, minkowski, mirror, mirror2D, mirrorDrawing, mirrorJoin, modifiers_exports as modifiers, modifyStep, moduleInitError, multiSectionSweep, normalAt, offset, offsetFace, offsetMesh, offsetShape, offsetWire2D, ok, or, orElse, organiseBlueprints, orientedFace, outerWire, patterns_exports as patterns, pendingCount, pipeline, pivotPlane, planarFace, planarJoint, planarWire, planetPlacements, pocket, pointOnSurface, pointsInside, polygon, polyhedron, polysideInnerRadius, polysidesBlueprint, positionOnCurve, prewarm, primitives_exports as primitives, prismaticJoint, projectEdges, projectPointOnFace, query_exports as query, queryError, rectangularPattern, registerHandler, registerKernel, registerKernelTier, registerOperation, registerShape, registerVoxel, rejectAll, removeChild, removeHolesFromFace, repairMesh, replayFrom, replayHistory, resetDisposalStats, resetPerformanceStats, resize, resolve, resolve3D, resolveDirection, resolvePlane, resolveRef, reverseCurve, revoluteJoint, revolve, roof, rotate, rotate2D, rotateDrawing, roundedRectangleBlueprint, scale, scale2D, scaleDrawing, box$1 as sdfBox, capsule as sdfCapsule, cone$1 as sdfCone, cylinder$1 as sdfCylinder, fieldAxialRamp as sdfFieldAxialRamp, fieldClamp as sdfFieldClamp, fieldConst as sdfFieldConst, fieldFromSdf as sdfFieldFromSdf, fieldRadialRamp as sdfFieldRadialRamp, lattice as sdfLattice, plane as sdfPlane, roundedBox as sdfRoundedBox, sphere as sdfSphere, strutLattice as sdfStrutLattice, sweep as sdfSweep, torus as sdfTorus, section, sectionToFace, serializeHistory, setJointValue, setJointValues, setShapeOrigin, setTagMetadata, sewShells, shape, shapeToMeshInput, shapeType, sharedEdges, shell, shellMesh, shellShape, shellWithEvolution, simplify, sketchCircle, sketchEllipse, sketchExtrude, sketchFace, sketchFaceOffset, sketchHelix, sketchLoft, sketchOnFace2D, sketchOnPlane2D, sketchParametricFunction, sketchPolysides, sketchRectangle, sketchRevolve, sketchRoundedRectangle, sketchSweep, sketchText, sketchWires, sketcherStateError, slice, solid, solidFromShell, solveAssembly, sphere$1 as sphere, sphericalJoint, split, stepCount, stepsFrom, stretch2D, subFace, supportExtrude, supportsConstraintSketch, supportsProjection, surfaceFromGrid, surfaceFromImage, sweep$1 as sweep, tagFaces, tangentArc, tap, tapErr, textBlueprints, textMetrics, thicken, thread, threePointArc, toBREP, toBufferGeometryData, toGroupedBufferGeometryData, toKernelVec, toLODGeometryData, toLODGeometryLevels, toLineGeometryData, toSVGPathD, toVec2, toVec3, torus$1 as torus, tpmsLattice, transformCopy, transforms_exports as transforms, translate, translate2D, translateDrawing, translatePlane, tryCatch, tryCatchAsync, twistExtrude, typeCastError, undoLast, unsupportedError, unwrap, unwrapErr, unwrapOr, unwrapOrElse, updateNode, updateRoles, uvBounds, uvCoordinates, validSolid, validatePlanetary, validationError, variableFillet, vecAdd, vecAngle, vecCross, vecDistance, vecDot, vecEquals, vecIsZero, vecLength, vecLengthSq, vecNegate, vecNormalize, vecProjectToPlane, vecRepr, vecRotate, vecScale, vecSub, vertex, vertexFinder, vertexPosition, verticesOfEdge, voxelBoolean, voxelBooleanField, voxelBooleanFieldShapes, voxelBooleanShapes, voxelField, voxelFieldFromShape, walkAssembly, windingNumbers, wire, wireFinder, wireLoop, wiresOfFace, withKernel, withKernelDir, withKernelPnt, withKernelVec, withQuality, withScope, withScopeResult, withScopeResultAsync, withTier, zip as zipResults };

package/dist/{healingFns-Bb3eEBNm.js → healingFns-C5AomW4j.js}

@@ -84,6 +84,29 @@ function toLODGeometryData(multiLOD, distances) {
 		fineDistance: distances?.fine ?? 0
 	};
 }
+/**
+* Convert N LOD meshes (from `meshLODs`, coarse → fine) into THREE.LOD level
+* data. The finest level gets distance 0 and each coarser level steps out by
+* `step`; pass `distances` (indexed coarse → fine) to set them explicitly.
+*
+* @example
+* ```ts
+* const lod = new THREE.LOD();
+* for (const { geometry, distance } of toLODGeometryLevels(meshLODs(shape))) {
+*   lod.addLevel(new THREE.Mesh(toBufferGeometry(geometry), mat), distance);
+* }
+* ```
+*/
+function toLODGeometryLevels(lods, options) {
+	const step = options?.step ?? 50;
+	const distances = options?.distances;
+	if (distances && distances.length !== lods.length) throw new Error(`toLODGeometryLevels: distances must have one entry per level (got ${distances.length} for ${lods.length} levels)`);
+	const last = lods.length - 1;
+	return lods.map((lod, idx) => ({
+		geometry: toBufferGeometryData(lod.mesh),
+		distance: distances?.[idx] ?? (last - idx) * step
+	}));
+}
 //#endregion
 //#region src/topology/chamferAngleFns.ts
 /**
@@ -1353,4 +1376,4 @@ function fixSelfIntersection(wire) {
 	}
 }
 //#endregion
-export { edgesOfFace as A, shellWithEvolution as C, getNurbsCurveData as D, fuseAllBisect as E, chamferDistAngle as F, toBufferGeometryData as I, toGroupedBufferGeometryData as L, sharedEdges as M, verticesOfEdge as N, getNurbsSurfaceData as O, wiresOfFace as P, toLODGeometryData as R, intersectWithEvolution as S, cutAllBisect as T, positionOnCurve as _, healFace as a, filletWithEvolution as b, isValid as c, draft as d, fillet as f, variableFillet as g, thicken as h, heal as i, facesOfEdge as j, adjacentFaces as k, solidFromShell as l, shell as m, fixSelfIntersection as n, healSolid as o, offset as p, fixShape as r, healWire as s, autoHeal as t, chamfer as u, chamferWithEvolution as v, checkBoolean as w, fuseWithEvolution as x, cutWithEvolution as y, toLineGeometryData as z };
+export { edgesOfFace as A, toLineGeometryData as B, shellWithEvolution as C, getNurbsCurveData as D, fuseAllBisect as E, chamferDistAngle as F, toBufferGeometryData as I, toGroupedBufferGeometryData as L, sharedEdges as M, verticesOfEdge as N, getNurbsSurfaceData as O, wiresOfFace as P, toLODGeometryData as R, intersectWithEvolution as S, cutAllBisect as T, positionOnCurve as _, healFace as a, filletWithEvolution as b, isValid as c, draft as d, fillet as f, variableFillet as g, thicken as h, heal as i, facesOfEdge as j, adjacentFaces as k, solidFromShell as l, shell as m, fixSelfIntersection as n, healSolid as o, offset as p, fixShape as r, healWire as s, autoHeal as t, chamfer as u, chamferWithEvolution as v, checkBoolean as w, fuseWithEvolution as x, cutWithEvolution as y, toLODGeometryLevels as z };

package/dist/{healingFns-CM5mVMow.cjs → healingFns-OL0bBSSY.cjs}

@@ -84,6 +84,29 @@ function toLODGeometryData(multiLOD, distances) {
 		fineDistance: distances?.fine ?? 0
 	};
 }
+/**
+* Convert N LOD meshes (from `meshLODs`, coarse → fine) into THREE.LOD level
+* data. The finest level gets distance 0 and each coarser level steps out by
+* `step`; pass `distances` (indexed coarse → fine) to set them explicitly.
+*
+* @example
+* ```ts
+* const lod = new THREE.LOD();
+* for (const { geometry, distance } of toLODGeometryLevels(meshLODs(shape))) {
+*   lod.addLevel(new THREE.Mesh(toBufferGeometry(geometry), mat), distance);
+* }
+* ```
+*/
+function toLODGeometryLevels(lods, options) {
+	const step = options?.step ?? 50;
+	const distances = options?.distances;
+	if (distances && distances.length !== lods.length) throw new Error(`toLODGeometryLevels: distances must have one entry per level (got ${distances.length} for ${lods.length} levels)`);
+	const last = lods.length - 1;
+	return lods.map((lod, idx) => ({
+		geometry: toBufferGeometryData(lod.mesh),
+		distance: distances?.[idx] ?? (last - idx) * step
+	}));
+}
 //#endregion
 //#region src/topology/chamferAngleFns.ts
 /**
@@ -1563,6 +1586,12 @@ Object.defineProperty(exports, "toLODGeometryData", {
 		return toLODGeometryData;
 	}
 });
+Object.defineProperty(exports, "toLODGeometryLevels", {
+	enumerable: true,
+	get: function() {
+		return toLODGeometryLevels;
+	}
+});
 Object.defineProperty(exports, "toLineGeometryData", {
 	enumerable: true,
 	get: function() {

package/dist/index.d.ts

@@ -92,9 +92,9 @@ export { getCurveType, curveStartPoint, curveEndPoint, curvePointAt, curveTangen
 export { getNurbsCurveData, getNurbsSurfaceData } from './topology/nurbsFns.js';
 export type { NurbsCurveData, NurbsSurfaceData } from './kernel/types.js';
 export { getSurfaceType, faceGeomType, faceOrientation, flipFaceOrientation, uvBounds, pointOnSurface, uvCoordinates, normalAt, faceCenter, faceAxis, classifyPointOnFace, outerWire, innerWires, removeHolesFromFace, projectPointOnFace, type UVBounds, type PointProjectionResult, } from './topology/faceFns.js';
-export { exportSTEP, exportSTL, exportIGES, meshMultiLOD, type ShapeMesh, type EdgeMesh, type MeshOptions, type MultiLODMesh, } from './topology/meshFns.js';
+export { exportSTEP, exportSTL, exportIGES, meshMultiLOD, meshLODs, type ShapeMesh, type EdgeMesh, type MeshOptions, type MultiLODMesh, type LODMesh, type MeshLODsOptions, } from './topology/meshFns.js';
 export { clearMeshCache, createMeshCache, type MeshCacheContext } from './topology/meshCache.js';
-export { toBufferGeometryData, toLineGeometryData, toGroupedBufferGeometryData, type BufferGeometryData, type LineGeometryData, type GroupedBufferGeometryData, type BufferGeometryGroup, toLODGeometryData, type LODGeometryData, } from './topology/threeHelpers.js';
+export { toBufferGeometryData, toLineGeometryData, toGroupedBufferGeometryData, type BufferGeometryData, type LineGeometryData, type GroupedBufferGeometryData, type BufferGeometryGroup, toLODGeometryData, type LODGeometryData, toLODGeometryLevels, type LODGeometryLevel, } from './topology/threeHelpers.js';
 export { booleanPipeline, type BooleanOptions, type BooleanPipelineStep, } from './topology/booleanFns.js';
 export { fuseAllBisect, cutAllBisect, type BatchBisectResult, type BatchBisectTelemetry, } from './topology/booleanBatchFns.js';
 export { type PipelineOp } from './topology/booleanFns.js';
@@ -137,7 +137,7 @@ export { importGLB } from './io/gltfImportFns.js';
 export type { DXFImportOptions } from './io/dxfImportFns.js';
 export { edgeFinder, faceFinder, wireFinder, vertexFinder, cornerFinder, type EdgeFinderFn, type FaceFinderFn, type WireFinderFn, type VertexFinderFn, type CornerFinderFn, type CornerFilter, type ShapeFinder, } from './query/finderFns.js';
 export { createCamera, cameraLookAt, cameraFromPlane, projectEdges, type Camera, } from './projection/cameraFns.js';
-export { type WorkerRequest, type InitRequest, type OperationRequest, type DisposeRequest, type WorkerResponse, type SuccessResponse, type ErrorResponse, isInitRequest, isOperationRequest, isDisposeRequest, isSuccessResponse, isErrorResponse, type PendingTask, type TaskQueue, createTaskQueue, enqueueTask, dequeueTask, pendingCount, isQueueEmpty, rejectAll, createWorkerClient, createOperationRegistry, registerHandler, createWorkerHandler, createWorkerPool, type WorkerClient, type WorkerClientOptions, type WorkerResult, type OperationHandler, type OperationRegistry, type WorkerPool, type WorkerPoolOptions, type WorkerOperation, } from './worker/index.js';
+export { type WorkerRequest, type InitRequest, type OperationRequest, type DisposeRequest, type WorkerResponse, type SuccessResponse, type ErrorResponse, type BatchRequest, type BatchOperation, type BatchItemResult, isInitRequest, isOperationRequest, isDisposeRequest, isBatchRequest, isSuccessResponse, isErrorResponse, type PendingTask, type TaskQueue, createTaskQueue, enqueueTask, dequeueTask, pendingCount, isQueueEmpty, rejectAll, createWorkerClient, createOperationRegistry, registerHandler, createWorkerHandler, createWorkerPool, type WorkerClient, type WorkerClientOptions, type WorkerResult, type OperationHandler, type OperationRegistry, type WorkerPool, type WorkerPoolOptions, type WorkerOperation, } from './worker/index.js';
 export type { Shapeable, WrappedMarker, FinderFn, FilletRadius, ChamferDistance, DraftAngle, DraftOptions, DrawingLike, DrillOptions, PocketOptions, BossOptions, MirrorJoinOptions, RectangularPatternOptions, } from './topology/apiTypes.js';
 export { resolve, resolve3D } from './topology/apiTypes.js';
 export { box, cylinder, sphere, cone, torus, ellipsoid, line, circle, ellipse, helix, threePointArc, ellipseArc, bsplineApprox, bezier, tangentArc, wire, wireLoop, face, filledFace, subFace, polygon, vertex, compound, solid, offsetFace, sewShells, addHoles, type BoxOptions, type CylinderOptions, type SphereOptions, type ConeOptions, type TorusOptions, type EllipsoidOptions, type CircleOptions, type EllipseOptions, type HelixOptions, type EllipseArcOptions, } from './topology/primitiveFns.js';

package/dist/io.cjs

@@ -1,5 +1,5 @@
 Object.defineProperty(exports, Symbol.toStringTag, { value: "Module" });
-const require_meshFns = require("./meshFns-DeKdpmu7.cjs");
+const require_meshFns = require("./meshFns-DNDsv2vH.cjs");
 const require_importFns = require("./importFns-B6hw9Nhx.cjs");
 exports.blueprintToDXF = require_importFns.blueprintToDXF;
 exports.exportDXF = require_importFns.exportDXF;

package/dist/io.js

@@ -1,3 +1,3 @@
-import { n as exportSTEP, r as exportSTL, t as exportIGES } from "./meshFns-CAAarhVm.js";
+import { n as exportSTEP, r as exportSTL, t as exportIGES } from "./meshFns-DoVH8EPW.js";
 import { a as importSVG, c as blueprintToDXF, d as exportGltf, f as exportOBJ, i as exportSTEPConfigured, l as exportDXF, n as importSTEP, o as importSVGPathD, r as importSTL, s as exportThreeMF, t as importIGES, u as exportGlb } from "./importFns-CEczwPdN.js";
 export { blueprintToDXF, exportDXF, exportGlb, exportGltf, exportIGES, exportOBJ, exportSTEP, exportSTEPConfigured, exportSTL, exportThreeMF, importIGES, importSTEP, importSTL, importSVG, importSVGPathD };

package/dist/{meshFns-DeKdpmu7.cjs → meshFns-DNDsv2vH.cjs}

@@ -314,6 +314,54 @@ function meshMultiLOD(shape, options) {
 		})
 	};
 }
+function boundsDiagonal(shape) {
+	const b = require_topologyQueryFns.getBounds(shape);
+	const dx = b.xMax - b.xMin;
+	const dy = b.yMax - b.yMin;
+	const dz = b.zMax - b.zMin;
+	return Math.sqrt(dx * dx + dy * dy + dz * dz) || 1;
+}
+/**
+* Mesh a shape at several levels of detail, coarse → fine.
+*
+* Tolerances are **scale-relative** by default: the finest level is a fraction
+* (`relativeTolerance`) of the shape's bounding-box diagonal and each coarser
+* level steps up by `spacing`×, so the same call gives sensible detail whether
+* the part is millimetres or metres. Pass `tolerances` for absolute control.
+* Each level goes through {@link mesh}, so levels are cached individually.
+*
+* @returns LOD levels ordered coarsest → finest.
+* @see toLODGeometryLevels — convert to THREE.LOD geometry data
+*/
+function meshLODs(shape, options = {}) {
+	const quality = require_shapeTypes.qualityDeflection();
+	const finestAngular = options.angularTolerance ?? quality.angularTolerance;
+	const cache = options.cache ?? true;
+	let tolerances;
+	if (options.tolerances && options.tolerances.length > 0) tolerances = [...options.tolerances];
+	else {
+		const levels = Math.max(1, Math.floor(options.levels ?? 3));
+		const spacing = options.spacing ?? 4;
+		const finest = (options.relativeTolerance ?? 5e-4) * boundsDiagonal(shape) || Number.EPSILON;
+		tolerances = [];
+		for (let i = levels - 1; i >= 0; i--) tolerances.push(finest * spacing ** i);
+	}
+	tolerances.sort((a, b) => b - a);
+	const finestTol = Math.min(...tolerances);
+	return tolerances.map((tolerance) => {
+		const angularTolerance = Math.min(finestAngular * (tolerance / finestTol), 1);
+		return {
+			tolerance,
+			angularTolerance,
+			mesh: mesh(shape, {
+				tolerance,
+				angularTolerance,
+				cache,
+				...options.signal ? { signal: options.signal } : {}
+			})
+		};
+	});
+}
 //#endregion
 Object.defineProperty(exports, "clearMeshCache", {
 	enumerable: true,
@@ -357,6 +405,12 @@ Object.defineProperty(exports, "meshEdges", {
 		return meshEdges;
 	}
 });
+Object.defineProperty(exports, "meshLODs", {
+	enumerable: true,
+	get: function() {
+		return meshLODs;
+	}
+});
 Object.defineProperty(exports, "meshMultiLOD", {
 	enumerable: true,
 	get: function() {

package/dist/{meshFns-CAAarhVm.js → meshFns-DoVH8EPW.js}

@@ -314,5 +314,53 @@ function meshMultiLOD(shape, options) {
 		})
 	};
 }
+function boundsDiagonal(shape) {
+	const b = getBounds(shape);
+	const dx = b.xMax - b.xMin;
+	const dy = b.yMax - b.yMin;
+	const dz = b.zMax - b.zMin;
+	return Math.sqrt(dx * dx + dy * dy + dz * dz) || 1;
+}
+/**
+* Mesh a shape at several levels of detail, coarse → fine.
+*
+* Tolerances are **scale-relative** by default: the finest level is a fraction
+* (`relativeTolerance`) of the shape's bounding-box diagonal and each coarser
+* level steps up by `spacing`×, so the same call gives sensible detail whether
+* the part is millimetres or metres. Pass `tolerances` for absolute control.
+* Each level goes through {@link mesh}, so levels are cached individually.
+*
+* @returns LOD levels ordered coarsest → finest.
+* @see toLODGeometryLevels — convert to THREE.LOD geometry data
+*/
+function meshLODs(shape, options = {}) {
+	const quality = qualityDeflection();
+	const finestAngular = options.angularTolerance ?? quality.angularTolerance;
+	const cache = options.cache ?? true;
+	let tolerances;
+	if (options.tolerances && options.tolerances.length > 0) tolerances = [...options.tolerances];
+	else {
+		const levels = Math.max(1, Math.floor(options.levels ?? 3));
+		const spacing = options.spacing ?? 4;
+		const finest = (options.relativeTolerance ?? 5e-4) * boundsDiagonal(shape) || Number.EPSILON;
+		tolerances = [];
+		for (let i = levels - 1; i >= 0; i--) tolerances.push(finest * spacing ** i);
+	}
+	tolerances.sort((a, b) => b - a);
+	const finestTol = Math.min(...tolerances);
+	return tolerances.map((tolerance) => {
+		const angularTolerance = Math.min(finestAngular * (tolerance / finestTol), 1);
+		return {
+			tolerance,
+			angularTolerance,
+			mesh: mesh(shape, {
+				tolerance,
+				angularTolerance,
+				cache,
+				...options.signal ? { signal: options.signal } : {}
+			})
+		};
+	});
+}
 //#endregion
-export { meshEdges as a, createMeshCache as c, mesh as i, exportSTEP as n, meshMultiLOD as o, exportSTL as r, clearMeshCache as s, exportIGES as t };
+export { meshEdges as a, clearMeshCache as c, mesh as i, createMeshCache as l, exportSTEP as n, meshLODs as o, exportSTL as r, meshMultiLOD as s, exportIGES as t };

package/dist/topology/meshFns.d.ts

@@ -93,3 +93,49 @@ export declare function meshMultiLOD(shape: AnyShape<Dimension>, options?: {
     readonly fineTolerance?: number | undefined;
     readonly angularTolerance?: number | undefined;
 }): MultiLODMesh;
+/** One level of a multi-resolution mesh: the geometry plus the tolerances it was meshed at. */
+export interface LODMesh {
+    /** Linear deflection (model units) used for this level. */
+    readonly tolerance: number;
+    /** Angular deflection (radians) used for this level. */
+    readonly angularTolerance: number;
+    /** The meshed geometry at this level. */
+    readonly mesh: ShapeMesh;
+}
+/** Options for {@link meshLODs}. */
+export interface MeshLODsOptions {
+    /** Number of levels, coarsest → finest (>= 1). Default 3. Ignored when `tolerances` is given. */
+    readonly levels?: number;
+    /**
+     * The finest level's linear tolerance as a fraction of the shape's bounding-box
+     * diagonal, so detail is scale-invariant across part sizes. Default 0.0005
+     * (0.05% of the diagonal). Ignored when `tolerances` is given.
+     */
+    readonly relativeTolerance?: number;
+    /**
+     * Geometric ratio between successive levels: each coarser level's tolerance is
+     * `spacing`× the next finer one. Default 4. Ignored when `tolerances` is given.
+     */
+    readonly spacing?: number;
+    /** Explicit absolute linear tolerances (one per level). Overrides `levels`/`relativeTolerance`/`spacing`; sorted coarse → fine. */
+    readonly tolerances?: readonly number[];
+    /** The finest level's angular deflection (radians). Defaults to the active quality level; coarser levels scale up with the tolerance ratio (capped at 1 rad). */
+    readonly angularTolerance?: number;
+    /** Abort signal forwarded to each level's mesh call. */
+    readonly signal?: AbortSignal;
+    /** Whether to use the mesh cache per level. Default true. */
+    readonly cache?: boolean;
+}
+/**
+ * Mesh a shape at several levels of detail, coarse → fine.
+ *
+ * Tolerances are **scale-relative** by default: the finest level is a fraction
+ * (`relativeTolerance`) of the shape's bounding-box diagonal and each coarser
+ * level steps up by `spacing`×, so the same call gives sensible detail whether
+ * the part is millimetres or metres. Pass `tolerances` for absolute control.
+ * Each level goes through {@link mesh}, so levels are cached individually.
+ *
+ * @returns LOD levels ordered coarsest → finest.
+ * @see toLODGeometryLevels — convert to THREE.LOD geometry data
+ */
+export declare function meshLODs(shape: AnyShape<Dimension>, options?: MeshLODsOptions): LODMesh[];

package/dist/topology/threeHelpers.d.ts

@@ -1,4 +1,4 @@
-import { ShapeMesh, EdgeMesh, MultiLODMesh } from './meshFns.js';
+import { ShapeMesh, EdgeMesh, MultiLODMesh, LODMesh } from './meshFns.js';
 /** Data ready to be used with THREE.BufferGeometry. */
 export interface BufferGeometryData {
     /** Flat float array of vertex positions (x,y,z interleaved). */
@@ -91,3 +91,27 @@ export declare function toLODGeometryData(multiLOD: MultiLODMesh, distances?: {
     readonly coarse?: number | undefined;
     readonly fine?: number | undefined;
 }): LODGeometryData;
+/** One LOD level of THREE.LOD-ready geometry: geometry plus its switch distance. */
+export interface LODGeometryLevel {
+    /** Geometry for this level. */
+    readonly geometry: BufferGeometryData;
+    /** Camera distance at which THREE.LOD switches to this level (finest = 0). */
+    readonly distance: number;
+}
+/**
+ * Convert N LOD meshes (from `meshLODs`, coarse → fine) into THREE.LOD level
+ * data. The finest level gets distance 0 and each coarser level steps out by
+ * `step`; pass `distances` (indexed coarse → fine) to set them explicitly.
+ *
+ * @example
+ * ```ts
+ * const lod = new THREE.LOD();
+ * for (const { geometry, distance } of toLODGeometryLevels(meshLODs(shape))) {
+ *   lod.addLevel(new THREE.Mesh(toBufferGeometry(geometry), mat), distance);
+ * }
+ * ```
+ */
+export declare function toLODGeometryLevels(lods: ReadonlyArray<LODMesh>, options?: {
+    readonly distances?: readonly number[];
+    readonly step?: number;
+}): LODGeometryLevel[];

package/dist/topology.cjs

@@ -3,9 +3,9 @@ const require_topologyQueryFns = require("./topologyQueryFns-ygBBXxnP.cjs");
 const require_faceFns = require("./faceFns-DKg2St8b.cjs");
 const require_shapeFns = require("./shapeFns-L4a8kH_A.cjs");
 const require_curveFns = require("./curveFns-Dx7_wMut.cjs");
-const require_meshFns = require("./meshFns-DeKdpmu7.cjs");
+const require_meshFns = require("./meshFns-DNDsv2vH.cjs");
 const require_solidBuilders = require("./solidBuilders-CgRmJEdn.cjs");
-const require_healingFns = require("./healingFns-CM5mVMow.cjs");
+const require_healingFns = require("./healingFns-OL0bBSSY.cjs");
 const require_primitiveFns = require("./primitiveFns-BAWtMd9H.cjs");
 exports.addHoles = require_primitiveFns.addHoles;
 exports.adjacentFaces = require_healingFns.adjacentFaces;

package/dist/topology.js

@@ -2,8 +2,8 @@ import { S as vertexPosition, _ as iterFaces, b as iterVertices, c as getFaces,
 import { S as shapeType, _ as cast, a as faceOrientation, b as isCompSolid, c as innerWires, d as pointOnSurface, f as projectPointOnFace, g as asTopo, h as uvCoordinates, i as faceGeomType, l as normalAt, m as uvBounds, n as faceAxis, o as flipFaceOrientation, r as faceCenter, s as getSurfaceType, t as classifyPointOnFace, u as outerWire, v as downcast, x as iterTopo, y as fromBREP } from "./faceFns-mo4ThIHz.js";
 import { a as isSameShape, i as isEqualShape, n as getHashCode } from "./shapeFns-DyBbhU30.js";
 import { a as curveIsPeriodic, c as curvePointAt, d as flipOrientation, f as getCurveType, h as offsetWire2D, i as curveIsClosed, l as curveStartPoint, m as interpolateCurve, n as curveAxis, o as curveLength, p as getOrientation, r as curveEndPoint, s as curvePeriod, t as approximateCurve, u as curveTangentAt } from "./curveFns-CG05Jygr.js";
-import { c as createMeshCache, n as exportSTEP, r as exportSTL, s as clearMeshCache, t as exportIGES } from "./meshFns-CAAarhVm.js";
+import { c as clearMeshCache, l as createMeshCache, n as exportSTEP, r as exportSTL, t as exportIGES } from "./meshFns-DoVH8EPW.js";
 import { h as fuseAll, p as cutAll } from "./solidBuilders-Biwv2cW3.js";
-import { A as edgesOfFace, C as shellWithEvolution, D as getNurbsCurveData, E as fuseAllBisect, F as chamferDistAngle, I as toBufferGeometryData, L as toGroupedBufferGeometryData, M as sharedEdges, N as verticesOfEdge, O as getNurbsSurfaceData, P as wiresOfFace, S as intersectWithEvolution, T as cutAllBisect, _ as positionOnCurve, a as healFace, b as filletWithEvolution, g as variableFillet, j as facesOfEdge, k as adjacentFaces, l as solidFromShell, n as fixSelfIntersection, o as healSolid, r as fixShape, s as healWire, t as autoHeal, v as chamferWithEvolution, w as checkBoolean, x as fuseWithEvolution, y as cutWithEvolution, z as toLineGeometryData } from "./healingFns-Bb3eEBNm.js";
+import { A as edgesOfFace, B as toLineGeometryData, C as shellWithEvolution, D as getNurbsCurveData, E as fuseAllBisect, F as chamferDistAngle, I as toBufferGeometryData, L as toGroupedBufferGeometryData, M as sharedEdges, N as verticesOfEdge, O as getNurbsSurfaceData, P as wiresOfFace, S as intersectWithEvolution, T as cutAllBisect, _ as positionOnCurve, a as healFace, b as filletWithEvolution, g as variableFillet, j as facesOfEdge, k as adjacentFaces, l as solidFromShell, n as fixSelfIntersection, o as healSolid, r as fixShape, s as healWire, t as autoHeal, v as chamferWithEvolution, w as checkBoolean, x as fuseWithEvolution, y as cutWithEvolution } from "./healingFns-C5AomW4j.js";
 import { C as threePointArc, D as wireLoop, E as wire, S as tangentArc, T as vertex, _ as polygon, a as circle, b as sphere, c as cylinder, d as ellipsoid, f as face, g as offsetFace, h as line, i as bsplineApprox, l as ellipse, m as helix, n as bezier, o as compound, p as filledFace, r as box, s as cone, t as addHoles, u as ellipseArc, v as sewShells, w as torus, x as subFace, y as solid } from "./primitiveFns-62SO4ti5.js";
 export { addHoles, adjacentFaces, approximateCurve, asTopo, autoHeal, bezier, box, bsplineApprox, cast, chamferDistAngle as chamferDistAngleShape, chamferWithEvolution, checkBoolean, circle, classifyPointOnFace, clearMeshCache, compound, cone, createMeshCache, curveAxis, curveEndPoint, curveIsClosed, curveIsPeriodic, curveLength, curvePeriod, curvePointAt, curveStartPoint, curveTangentAt, cutAll, cutAllBisect, cutWithEvolution, cylinder, fromBREP as deserializeShape, downcast, edgesOfFace, ellipse, ellipseArc, ellipsoid, exportIGES, exportSTEP, exportSTL, face, faceAxis, faceCenter, faceGeomType, faceOrientation, facesOfEdge, filledFace, filletWithEvolution, fixSelfIntersection, fixShape, flipFaceOrientation, flipOrientation, fuseAll, fuseAllBisect, fuseWithEvolution, getBounds, getCurveType, getEdges, getFaces, getHashCode, getNurbsCurveData, getNurbsSurfaceData, getOrientation, getSurfaceType, getVertices, getWires, healFace, healSolid, healWire, helix, innerWires, interpolateCurve, intersectWithEvolution, invalidateShapeCache, isCompSolid, isEqualShape, isSameShape, iterEdges, iterFaces, iterTopo, iterVertices, iterWires, line, normalAt, offsetFace, offsetWire2D, outerWire, pointOnSurface, polygon, positionOnCurve, projectPointOnFace, sewShells, shapeType, sharedEdges, shellWithEvolution, solid, solidFromShell, sphere, subFace, tangentArc, threePointArc, toBufferGeometryData, toGroupedBufferGeometryData, toLineGeometryData, torus, uvBounds, uvCoordinates, variableFillet, vertex, vertexPosition, verticesOfEdge, wire, wireLoop, wiresOfFace };

package/dist/worker/index.d.ts

@@ -4,7 +4,7 @@
  * Provides protocol types and helpers for running CAD operations
  * in Web Workers. Shapes are serialized as BREP strings for transfer.
  */
-export { type WorkerRequest, type InitRequest, type OperationRequest, type DisposeRequest, type WorkerResponse, type SuccessResponse, type ErrorResponse, isInitRequest, isOperationRequest, isDisposeRequest, isSuccessResponse, isErrorResponse, } from './protocol.js';
+export { type WorkerRequest, type InitRequest, type OperationRequest, type DisposeRequest, type WorkerResponse, type SuccessResponse, type ErrorResponse, type BatchRequest, type BatchOperation, type BatchItemResult, isInitRequest, isOperationRequest, isDisposeRequest, isBatchRequest, isSuccessResponse, isErrorResponse, } from './protocol.js';
 export { type PendingTask, type TaskQueue, createTaskQueue, enqueueTask, dequeueTask, pendingCount, isEmpty as isQueueEmpty, rejectAll, } from './taskQueue.js';
 export { createWorkerClient, type WorkerClient, type WorkerClientOptions, type WorkerResult, } from './workerClient.js';
 export { createOperationRegistry, registerHandler, createWorkerHandler, type OperationHandler, type OperationRegistry, } from './workerHandler.js';

package/dist/worker/protocol.d.ts

@@ -9,7 +9,7 @@ export interface WorkerRequest {
     /** Unique identifier for correlating requests with responses. */
     readonly id: string;
     /** Discriminant indicating the kind of request. */
-    readonly type: 'init' | 'operation' | 'dispose';
+    readonly type: 'init' | 'operation' | 'dispose' | 'batch';
 }
 /** Request to initialize the worker (load the WASM geometry kernel). */
 export interface InitRequest extends WorkerRequest {
@@ -36,6 +36,36 @@ export interface OperationRequest extends WorkerRequest {
 export interface DisposeRequest extends WorkerRequest {
     readonly type: 'dispose';
 }
+/** A single operation inside a {@link BatchRequest}. */
+export interface BatchOperation {
+    /** Name of the registered operation to invoke. */
+    readonly operation: string;
+    /** BREP-serialized input shapes. */
+    readonly shapesBrep: ReadonlyArray<string>;
+    /** Parameters forwarded to the operation handler. */
+    readonly params: Readonly<Record<string, unknown>>;
+}
+/**
+ * Request to run several operations in a single message, instead of one
+ * message per op. Cuts per-message round-trip + serialization overhead when a
+ * caller has many small ops for one worker.
+ */
+export interface BatchRequest extends WorkerRequest {
+    readonly type: 'batch';
+    /** Operations to run, in order. */
+    readonly operations: ReadonlyArray<BatchOperation>;
+}
+/**
+ * Outcome of one operation in a batch. Each item carries its own success/error,
+ * so one failing op doesn't discard the others. Returned (as `resultData`) in
+ * the batch's {@link SuccessResponse}.
+ */
+export interface BatchItemResult {
+    readonly success: boolean;
+    readonly resultBrep?: string;
+    readonly resultData?: unknown;
+    readonly error?: string;
+}
 /** Base interface for all messages sent from a worker back to the main thread. */
 export interface WorkerResponse {
     /** Matches the {@link WorkerRequest.id} of the originating request. */
@@ -63,6 +93,8 @@ export declare function isInitRequest(msg: WorkerRequest): msg is InitRequest;
 export declare function isOperationRequest(msg: WorkerRequest): msg is OperationRequest;
 /** Narrow a {@link WorkerRequest} to a {@link DisposeRequest}. */
 export declare function isDisposeRequest(msg: WorkerRequest): msg is DisposeRequest;
+/** Narrow a {@link WorkerRequest} to a {@link BatchRequest}. */
+export declare function isBatchRequest(msg: WorkerRequest): msg is BatchRequest;
 /** Narrow a {@link WorkerResponse} to a {@link SuccessResponse}. */
 export declare function isSuccessResponse(msg: WorkerResponse): msg is SuccessResponse;
 /** Narrow a {@link WorkerResponse} to an {@link ErrorResponse}. */

package/dist/worker/workerClient.d.ts

@@ -1,8 +1,4 @@
-/**
- * Worker client for offloading CAD operations to a Web Worker.
- *
- * Provides a promise-based API over the worker message protocol.
- */
+import { BatchOperation, BatchItemResult } from './protocol.js';
 export interface WorkerClientOptions {
     /** The Worker instance to communicate with. */
     worker: Worker;
@@ -19,6 +15,12 @@ export interface WorkerClient {
     init(): Promise<void>;
     /** Execute a named operation with BREP-serialized shapes and parameters. */
     execute(operation: string, shapesBrep: string[], params: Record<string, unknown>): Promise<WorkerResult>;
+    /**
+     * Run several operations in a single message. Resolves with one result per
+     * operation, in order; a failing op yields `{ success: false, error }` rather
+     * than rejecting the whole batch (unlike a worker pool's `executeBatch`).
+     */
+    executeBatch(operations: ReadonlyArray<BatchOperation>): Promise<BatchItemResult[]>;
     /** Dispose the client, rejecting all pending operations. */
     dispose(): void;
 }

package/dist/worker.cjs

@@ -1,5 +1,5 @@
 Object.defineProperty(exports, Symbol.toStringTag, { value: "Module" });
-const require_workerPool = require("./workerPool-edtPrfHM.cjs");
+const require_workerPool = require("./workerPool-D30NsiIW.cjs");
 exports.createOperationRegistry = require_workerPool.createOperationRegistry;
 exports.createTaskQueue = require_workerPool.createTaskQueue;
 exports.createWorkerClient = require_workerPool.createWorkerClient;
@@ -7,6 +7,7 @@ exports.createWorkerHandler = require_workerPool.createWorkerHandler;
 exports.createWorkerPool = require_workerPool.createWorkerPool;
 exports.dequeueTask = require_workerPool.dequeueTask;
 exports.enqueueTask = require_workerPool.enqueueTask;
+exports.isBatchRequest = require_workerPool.isBatchRequest;
 exports.isDisposeRequest = require_workerPool.isDisposeRequest;
 exports.isErrorResponse = require_workerPool.isErrorResponse;
 exports.isInitRequest = require_workerPool.isInitRequest;

package/dist/worker.js

@@ -1,2 +1,2 @@
-import { a as createWorkerClient, c as enqueueTask, d as rejectAll, f as isDisposeRequest, g as isSuccessResponse, h as isOperationRequest, i as registerHandler, l as isEmpty, m as isInitRequest, n as createOperationRegistry, o as createTaskQueue, p as isErrorResponse, r as createWorkerHandler, s as dequeueTask, t as createWorkerPool, u as pendingCount } from "./workerPool-BxBKpKeI.js";
-export { createOperationRegistry, createTaskQueue, createWorkerClient, createWorkerHandler, createWorkerPool, dequeueTask, enqueueTask, isDisposeRequest, isErrorResponse, isInitRequest, isOperationRequest, isEmpty as isQueueEmpty, isSuccessResponse, pendingCount, registerHandler, rejectAll };
+import { _ as isSuccessResponse, a as createWorkerClient, c as enqueueTask, d as rejectAll, f as isBatchRequest, g as isOperationRequest, h as isInitRequest, i as registerHandler, l as isEmpty, m as isErrorResponse, n as createOperationRegistry, o as createTaskQueue, p as isDisposeRequest, r as createWorkerHandler, s as dequeueTask, t as createWorkerPool, u as pendingCount } from "./workerPool-XcYX2UZ0.js";
+export { createOperationRegistry, createTaskQueue, createWorkerClient, createWorkerHandler, createWorkerPool, dequeueTask, enqueueTask, isBatchRequest, isDisposeRequest, isErrorResponse, isInitRequest, isOperationRequest, isEmpty as isQueueEmpty, isSuccessResponse, pendingCount, registerHandler, rejectAll };

package/dist/{workerPool-edtPrfHM.cjs → workerPool-D30NsiIW.cjs}

@@ -11,6 +11,10 @@ function isOperationRequest(msg) {
 function isDisposeRequest(msg) {
 	return msg.type === "dispose";
 }
+/** Narrow a {@link WorkerRequest} to a {@link BatchRequest}. */
+function isBatchRequest(msg) {
+	return msg.type === "batch";
+}
 /** Narrow a {@link WorkerResponse} to a {@link SuccessResponse}. */
 function isSuccessResponse(msg) {
 	return msg.success;
@@ -111,6 +115,18 @@ function createWorkerClient(options) {
 				parameters: params
 			});
 		},
+		executeBatch(operations) {
+			const expected = operations.length;
+			return send({
+				id: nextId(),
+				type: "batch",
+				operations
+			}).then((result) => {
+				const data = result.resultData;
+				if (!Array.isArray(data) || data.length !== expected) throw new Error(`Invalid batch response: expected ${expected} results`);
+				return data;
+			});
+		},
 		dispose() {
 			disposed = true;
 			for (const entry of pending.values()) entry.reject(/* @__PURE__ */ new Error("WorkerClient disposed"));
@@ -136,6 +152,44 @@ function registerHandler(registry, name, handler) {
 	operations.set(name, handler);
 	return { operations };
 }
+function errorMessage(e) {
+	return e instanceof Error ? e.message : String(e);
+}
+/** Run one registered operation, capturing unknown-op and thrown errors as a result. */
+function runOp(registry, operation, shapesBrep, params) {
+	const handler = registry.operations.get(operation);
+	if (!handler) return {
+		success: false,
+		error: `Unknown operation: ${operation}`
+	};
+	try {
+		const r = handler(shapesBrep, params);
+		return {
+			success: true,
+			...r.resultBrep !== void 0 ? { resultBrep: r.resultBrep } : {},
+			...r.resultData !== void 0 ? { resultData: r.resultData } : {}
+		};
+	} catch (e) {
+		return {
+			success: false,
+			error: errorMessage(e)
+		};
+	}
+}
+/** Build a single-operation response from a per-op result. */
+function itemToResponse(id, item) {
+	if (!item.success) return {
+		id,
+		success: false,
+		error: item.error ?? "operation failed"
+	};
+	return {
+		id,
+		success: true,
+		...item.resultBrep !== void 0 ? { resultBrep: item.resultBrep } : {},
+		...item.resultData !== void 0 ? { resultData: item.resultData } : {}
+	};
+}
 /**
 * Set up message handling in a Web Worker context.
 *
@@ -158,40 +212,25 @@ function createWorkerHandler(registry, initFn) {
 				const response = {
 					id: msg.id,
 					success: false,
-					error: e instanceof Error ? e.message : String(e)
+					error: errorMessage(e)
 				};
 				scope.postMessage(response);
 			}
 			return;
 		}
 		if (isOperationRequest(msg)) {
-			const handler = registry.operations.get(msg.operation);
-			if (!handler) {
-				const response = {
-					id: msg.id,
-					success: false,
-					error: `Unknown operation: ${msg.operation}`
-				};
-				scope.postMessage(response);
-				return;
-			}
-			try {
-				const result = handler(msg.shapesBrep, msg.parameters);
-				const response = {
-					id: msg.id,
-					success: true,
-					...result.resultBrep !== void 0 ? { resultBrep: result.resultBrep } : {},
-					...result.resultData !== void 0 ? { resultData: result.resultData } : {}
-				};
-				scope.postMessage(response);
-			} catch (e) {
-				const response = {
-					id: msg.id,
-					success: false,
-					error: e instanceof Error ? e.message : String(e)
-				};
-				scope.postMessage(response);
-			}
+			const item = runOp(registry, msg.operation, msg.shapesBrep, msg.parameters);
+			scope.postMessage(itemToResponse(msg.id, item));
+			return;
+		}
+		if (isBatchRequest(msg)) {
+			const results = msg.operations.map((op) => runOp(registry, op.operation, op.shapesBrep, op.params));
+			const response = {
+				id: msg.id,
+				success: true,
+				resultData: results
+			};
+			scope.postMessage(response);
 			return;
 		}
 		if (isDisposeRequest(msg)) {
@@ -311,6 +350,12 @@ Object.defineProperty(exports, "enqueueTask", {
 		return enqueueTask;
 	}
 });
+Object.defineProperty(exports, "isBatchRequest", {
+	enumerable: true,
+	get: function() {
+		return isBatchRequest;
+	}
+});
 Object.defineProperty(exports, "isDisposeRequest", {
 	enumerable: true,
 	get: function() {

package/dist/{workerPool-BxBKpKeI.js → workerPool-XcYX2UZ0.js}

@@ -11,6 +11,10 @@ function isOperationRequest(msg) {
 function isDisposeRequest(msg) {
 	return msg.type === "dispose";
 }
+/** Narrow a {@link WorkerRequest} to a {@link BatchRequest}. */
+function isBatchRequest(msg) {
+	return msg.type === "batch";
+}
 /** Narrow a {@link WorkerResponse} to a {@link SuccessResponse}. */
 function isSuccessResponse(msg) {
 	return msg.success;
@@ -111,6 +115,18 @@ function createWorkerClient(options) {
 				parameters: params
 			});
 		},
+		executeBatch(operations) {
+			const expected = operations.length;
+			return send({
+				id: nextId(),
+				type: "batch",
+				operations
+			}).then((result) => {
+				const data = result.resultData;
+				if (!Array.isArray(data) || data.length !== expected) throw new Error(`Invalid batch response: expected ${expected} results`);
+				return data;
+			});
+		},
 		dispose() {
 			disposed = true;
 			for (const entry of pending.values()) entry.reject(/* @__PURE__ */ new Error("WorkerClient disposed"));
@@ -136,6 +152,44 @@ function registerHandler(registry, name, handler) {
 	operations.set(name, handler);
 	return { operations };
 }
+function errorMessage(e) {
+	return e instanceof Error ? e.message : String(e);
+}
+/** Run one registered operation, capturing unknown-op and thrown errors as a result. */
+function runOp(registry, operation, shapesBrep, params) {
+	const handler = registry.operations.get(operation);
+	if (!handler) return {
+		success: false,
+		error: `Unknown operation: ${operation}`
+	};
+	try {
+		const r = handler(shapesBrep, params);
+		return {
+			success: true,
+			...r.resultBrep !== void 0 ? { resultBrep: r.resultBrep } : {},
+			...r.resultData !== void 0 ? { resultData: r.resultData } : {}
+		};
+	} catch (e) {
+		return {
+			success: false,
+			error: errorMessage(e)
+		};
+	}
+}
+/** Build a single-operation response from a per-op result. */
+function itemToResponse(id, item) {
+	if (!item.success) return {
+		id,
+		success: false,
+		error: item.error ?? "operation failed"
+	};
+	return {
+		id,
+		success: true,
+		...item.resultBrep !== void 0 ? { resultBrep: item.resultBrep } : {},
+		...item.resultData !== void 0 ? { resultData: item.resultData } : {}
+	};
+}
 /**
 * Set up message handling in a Web Worker context.
 *
@@ -158,40 +212,25 @@ function createWorkerHandler(registry, initFn) {
 				const response = {
 					id: msg.id,
 					success: false,
-					error: e instanceof Error ? e.message : String(e)
+					error: errorMessage(e)
 				};
 				scope.postMessage(response);
 			}
 			return;
 		}
 		if (isOperationRequest(msg)) {
-			const handler = registry.operations.get(msg.operation);
-			if (!handler) {
-				const response = {
-					id: msg.id,
-					success: false,
-					error: `Unknown operation: ${msg.operation}`
-				};
-				scope.postMessage(response);
-				return;
-			}
-			try {
-				const result = handler(msg.shapesBrep, msg.parameters);
-				const response = {
-					id: msg.id,
-					success: true,
-					...result.resultBrep !== void 0 ? { resultBrep: result.resultBrep } : {},
-					...result.resultData !== void 0 ? { resultData: result.resultData } : {}
-				};
-				scope.postMessage(response);
-			} catch (e) {
-				const response = {
-					id: msg.id,
-					success: false,
-					error: e instanceof Error ? e.message : String(e)
-				};
-				scope.postMessage(response);
-			}
+			const item = runOp(registry, msg.operation, msg.shapesBrep, msg.parameters);
+			scope.postMessage(itemToResponse(msg.id, item));
+			return;
+		}
+		if (isBatchRequest(msg)) {
+			const results = msg.operations.map((op) => runOp(registry, op.operation, op.shapesBrep, op.params));
+			const response = {
+				id: msg.id,
+				success: true,
+				resultData: results
+			};
+			scope.postMessage(response);
 			return;
 		}
 		if (isDisposeRequest(msg)) {
@@ -269,4 +308,4 @@ function createWorkerPool(options) {
 	};
 }
 //#endregion
-export { createWorkerClient as a, enqueueTask as c, rejectAll as d, isDisposeRequest as f, isSuccessResponse as g, isOperationRequest as h, registerHandler as i, isEmpty as l, isInitRequest as m, createOperationRegistry as n, createTaskQueue as o, isErrorResponse as p, createWorkerHandler as r, dequeueTask as s, createWorkerPool as t, pendingCount as u };
+export { isSuccessResponse as _, createWorkerClient as a, enqueueTask as c, rejectAll as d, isBatchRequest as f, isOperationRequest as g, isInitRequest as h, registerHandler as i, isEmpty as l, isErrorResponse as m, createOperationRegistry as n, createTaskQueue as o, isDisposeRequest as p, createWorkerHandler as r, dequeueTask as s, createWorkerPool as t, pendingCount as u };

package/package.json

@@ -1,6 +1,6 @@
 {
   "name": "brepjs",
-  "version": "18.104.0",
+  "version": "18.106.0",
   "description": "Web CAD library with pluggable geometry kernel",
   "keywords": [
     "cad",