brepjs 15.2.8 → 15.2.9

package/dist/2d.cjs

@@ -2,9 +2,9 @@ Object.defineProperty(exports, Symbol.toStringTag, { value: "Module" });
 const require_shapeTypes = require("./shapeTypes-Bfw136X-.cjs");
 const require_errors = require("./errors-CXRNVCec.cjs");
 const require_faceFns = require("./faceFns-CKL9Us23.cjs");
-const require_boolean2D = require("./boolean2D-DpWRnTXy.cjs");
+const require_boolean2D = require("./boolean2D-THA5506z.cjs");
 const require_blueprint = require("./blueprint-CbD0PYLr.cjs");
-const require_blueprintFns = require("./blueprintFns-DXBNyCzX.cjs");
+const require_blueprintFns = require("./blueprintFns-_JcjAvPP.cjs");
 //#region src/core/curve2dHandle.ts
 /**
 * Wrap a raw kernel 2D curve handle with brand + disposal tracking.

package/dist/2d.js

@@ -1,9 +1,9 @@
 import { B as createKernelHandle, Z as getKernel2D, a as createEdge } from "./shapeTypes-Ct7W6h2X.js";
 import { A as ok, b as err, d as validationError, t as BrepErrorCode } from "./errors-DboJwVCf.js";
 import { z as kernelCallRaw } from "./faceFns-DMFG-piP.js";
-import { _ as Blueprints, a as fuseBlueprints, c as roundedRectangleBlueprint, g as CompoundBlueprint, h as organiseBlueprints, i as cutBlueprints, n as fuse2D, o as intersectBlueprints, r as intersect2D, s as polysidesBlueprint, t as cut2D } from "./boolean2D-5FuQ5bn1.js";
+import { _ as Blueprints, a as fuseBlueprints, c as roundedRectangleBlueprint, g as CompoundBlueprint, h as organiseBlueprints, i as cutBlueprints, n as fuse2D, o as intersectBlueprints, r as intersect2D, s as polysidesBlueprint, t as cut2D } from "./boolean2D-B-l_kvhp.js";
 import { _ as Curve2D, t as Blueprint, y as BoundingBox2d } from "./blueprint-CM1OOluq.js";
-import { S as reverseCurve, _ as curve2dIsOnCurve, a as isInside2D, b as curve2dSplitAt, c as scale2D, d as stretch2D, f as toSVGPathD, g as curve2dFirstPoint, h as curve2dDistanceFrom, i as getOrientation2D, l as sketchOnFace2D, m as curve2dBoundingBox, o as mirror2D, p as translate2D, r as getBounds2D, s as rotate2D, t as createBlueprint, u as sketchOnPlane2D, v as curve2dLastPoint, x as curve2dTangentAt, y as curve2dParameter } from "./blueprintFns-CVp-9asE.js";
+import { S as reverseCurve, _ as curve2dIsOnCurve, a as isInside2D, b as curve2dSplitAt, c as scale2D, d as stretch2D, f as toSVGPathD, g as curve2dFirstPoint, h as curve2dDistanceFrom, i as getOrientation2D, l as sketchOnFace2D, m as curve2dBoundingBox, o as mirror2D, p as translate2D, r as getBounds2D, s as rotate2D, t as createBlueprint, u as sketchOnPlane2D, v as curve2dLastPoint, x as curve2dTangentAt, y as curve2dParameter } from "./blueprintFns-BngkSCmA.js";
 //#region src/core/curve2dHandle.ts
 /**
 * Wrap a raw kernel 2D curve handle with brand + disposal tracking.

package/dist/{blueprintFns-CVp-9asE.js → blueprintFns-BngkSCmA.js}

@@ -1,5 +1,5 @@
 import { A as ok, b as err, d as validationError, t as BrepErrorCode } from "./errors-DboJwVCf.js";
-import { g as CompoundBlueprint } from "./boolean2D-5FuQ5bn1.js";
+import { g as CompoundBlueprint } from "./boolean2D-B-l_kvhp.js";
 import { t as Blueprint } from "./blueprint-CM1OOluq.js";
 //#region src/2d/lib/curve2dFns.ts
 /**

package/dist/{blueprintFns-DXBNyCzX.cjs → blueprintFns-_JcjAvPP.cjs}

@@ -1,5 +1,5 @@
 const require_errors = require("./errors-CXRNVCec.cjs");
-const require_boolean2D = require("./boolean2D-DpWRnTXy.cjs");
+const require_boolean2D = require("./boolean2D-THA5506z.cjs");
 const require_blueprint = require("./blueprint-CbD0PYLr.cjs");
 //#region src/2d/lib/curve2dFns.ts
 /**

package/dist/{boolean2D-5FuQ5bn1.js → boolean2D-B-l_kvhp.js}

@@ -10,7 +10,7 @@ import { r as lastOrThrow, t as firstOrThrow } from "./arrayAccess-tCIbjLs5.js";
 import { _ as zip, i as makeNewFaceWithinFace, r as makeFace, s as assembleWire } from "./surfaceBuilders-Im6Xef27.js";
 import { _ as samePoint$1, b as subtract2d, d as cartesianToPolar, f as crossProduct2d, g as rotate2d, h as polarToCartesian, l as add2d, m as polarAngle2d, o as normalize2d, p as distance2d, s as PRECISION_INTERSECTION, v as scalarMultiply2d } from "./helpers-XTeLX4mm.js";
 import { _ as Curve2D, b as removeDuplicatePoints, c as make2dCircle, f as make2dSegmentCurve, h as approximateAsBSpline, m as make2dThreePointArc, n as asSVG, o as make2dArcFromCenter, p as make2dTangentArc, r as viewbox, s as make2dBezierCurve, t as Blueprint, u as make2dEllipseArc, x as isPoint2D, y as BoundingBox2d } from "./blueprint-CM1OOluq.js";
-import { c as sweep, i as complexExtrude, l as twistExtrude, r as revolve, t as extrude } from "./extrudeFns-DLdCPXMI.js";
+import { c as sweep, i as complexExtrude, l as twistExtrude, r as revolve, t as extrude } from "./extrudeFns-ClsoGp5V.js";
 //#region node_modules/flatqueue/index.js
 /** @template T */
 var FlatQueue = class {

package/dist/{boolean2D-DpWRnTXy.cjs → boolean2D-THA5506z.cjs}

@@ -10,7 +10,7 @@ const require_arrayAccess = require("./arrayAccess-DsnQpdSD.cjs");
 const require_surfaceBuilders = require("./surfaceBuilders-DzTJA3fK.cjs");
 const require_helpers = require("./helpers-BFyEt7Fv.cjs");
 const require_blueprint = require("./blueprint-CbD0PYLr.cjs");
-const require_extrudeFns = require("./extrudeFns-YdWmD0Tw.cjs");
+const require_extrudeFns = require("./extrudeFns-BjfEBgIw.cjs");
 //#region node_modules/flatqueue/index.js
 /** @template T */
 var FlatQueue = class {

package/dist/brepjs.cjs

@@ -1,5 +1,5 @@
 Object.defineProperty(exports, Symbol.toStringTag, { value: "Module" });
-const require_drawFns = require("./drawFns-DVuvL7aY.cjs");
+const require_drawFns = require("./drawFns-C1XeyF0v.cjs");
 const require_shapeTypes = require("./shapeTypes-Bfw136X-.cjs");
 const require_occtWasmAdapter = require("./occtWasmAdapter-CPINzXxh.cjs");
 const require_errors = require("./errors-CXRNVCec.cjs");
@@ -16,13 +16,13 @@ const require_surfaceBuilders = require("./surfaceBuilders-DzTJA3fK.cjs");
 const require_booleanFns = require("./booleanFns-CQNV8MMq.cjs");
 const require_primitiveFns = require("./primitiveFns-CL6lNda-.cjs");
 const require_historyFns = require("./historyFns-DBSgZGtF.cjs");
-const require_boolean2D = require("./boolean2D-DpWRnTXy.cjs");
+const require_boolean2D = require("./boolean2D-THA5506z.cjs");
 const require_helpers = require("./helpers-BFyEt7Fv.cjs");
 const require_solidBuilders = require("./solidBuilders-DI9d6ZIx.cjs");
 const require_measureFns = require("./measureFns-C2SnZLhD.cjs");
 const require_cornerFinder = require("./cornerFinder-4PxIzwrl.cjs");
-const require_extrudeFns = require("./extrudeFns-YdWmD0Tw.cjs");
-const require_blueprintFns = require("./blueprintFns-DXBNyCzX.cjs");
+const require_extrudeFns = require("./extrudeFns-BjfEBgIw.cjs");
+const require_blueprintFns = require("./blueprintFns-_JcjAvPP.cjs");
 const require_importFns = require("./importFns-DRNXwoUG.cjs");
 const require_shapeRefFns = require("./shapeRefFns-t-5-Aqku.cjs");
 const require_workerHandler = require("./workerHandler-C-3cFcsQ.cjs");

package/dist/brepjs.js

@@ -14,14 +14,14 @@ import { n as fill, r as makeFace } from "./surfaceBuilders-Im6Xef27.js";
 import { a as fuseAll, c as sectionToFace$1, i as fuse$1, l as slice$1, n as cut$1, o as intersect$1, r as cutAll, s as section$1, t as booleanPipeline, u as split$1 } from "./booleanFns-D_DVbfzR.js";
 import { $ as getNurbsSurfaceData, A as fixShape, B as offset$1, C as threePointArc, D as wireLoop, E as wire, F as isValid$1, G as chamferWithEvolution, H as thicken$1, I as solidFromShell, J as fuseWithEvolution, K as cutWithEvolution, L as chamfer$1, M as healFace, N as healSolid, O as autoHeal, P as healWire, Q as getNurbsCurveData, R as draft$1, S as tangentArc, T as vertex, U as variableFillet, V as shell$1, W as positionOnCurve, X as shellWithEvolution, Y as intersectWithEvolution, Z as checkBoolean, _ as polygon, a as circle, at as wiresOfFace, b as sphere, c as cylinder, ct as toGroupedBufferGeometryData, d as ellipsoid, et as adjacentFaces, f as face, g as offsetFace, h as line, i as bsplineApprox, it as verticesOfEdge, j as heal$1, k as fixSelfIntersection, l as ellipse, lt as toLODGeometryData, m as helix, n as bezier, nt as facesOfEdge, o as compound, ot as chamferDistAngle, p as filledFace, q as filletWithEvolution, r as box, rt as sharedEdges, s as cone, st as toBufferGeometryData, t as addHoles, tt as edgesOfFace, u as ellipseArc, ut as toLineGeometryData, v as sewShells, w as torus, x as subFace, y as solid, z as fillet$1 } from "./primitiveFns-BAifgHMW.js";
 import { C as walkAssembly, D as exportAssemblySTEP, E as linearPattern, O as createAssembly, S as updateNode, _ as collectShapes, a as findStep, b as findNode, c as registerOperation, d as replayHistory, f as serializeHistory, g as addChild, h as undoLast, i as deserializeHistory, l as registerShape, m as stepsFrom, n as createHistory, o as getShape, p as stepCount, r as createRegistry, s as modifyStep, t as addStep, u as replayFrom, v as countNodes, w as circularPattern, x as removeChild, y as createAssemblyNode } from "./historyFns-DltXL-vp.js";
-import { a as fuseBlueprints, c as roundedRectangleBlueprint, f as Sketch, h as organiseBlueprints, i as cutBlueprints, m as loftAll, n as fuse2D, o as intersectBlueprints, p as loft$1, r as intersect2D, s as polysidesBlueprint, t as cut2D } from "./boolean2D-5FuQ5bn1.js";
+import { a as fuseBlueprints, c as roundedRectangleBlueprint, f as Sketch, h as organiseBlueprints, i as cutBlueprints, m as loftAll, n as fuse2D, o as intersectBlueprints, p as loft$1, r as intersect2D, s as polysidesBlueprint, t as cut2D } from "./boolean2D-B-l_kvhp.js";
 import { a as createTypedFinder, i as wireFinder, n as edgeFinder, r as faceFinder, t as getSingleFace } from "./helpers-XTeLX4mm.js";
-import { $ as sketchFaceOffset, B as drawSingleCircle, C as cameraFromPlane, D as makeProjectedEdges, E as projectEdges, F as drawParametricFunction, G as loadFont, H as drawText, I as drawPointsInterpolation, J as textMetrics, K as sketchText, L as drawPolysides, M as draw, N as drawCircle, O as isProjectionPlane, P as drawEllipse, Q as sketchEllipse, R as drawRectangle, S as drawProjection, T as createCamera, U as fontMetrics, V as drawSingleEllipse, W as getFont, X as polysideInnerRadius, Y as makeBaseBox, Z as sketchCircle, _ as sketchLoft, a as drawingIntersect, b as sketchWires, c as rotateDrawing, d as compoundSketchExtrude, et as sketchHelix, f as compoundSketchFace, g as sketchFace, h as sketchExtrude, i as drawingFuse, it as sketchRoundedRectangle, j as deserializeDrawing, l as scaleDrawing, m as compoundSketchRevolve, n as drawingCut, nt as sketchPolysides, o as drawingToSketchOnPlane, ot as Sketches, p as compoundSketchLoft, q as textBlueprints, r as drawingFillet, rt as sketchRectangle, s as mirrorDrawing, st as CompoundSketch, t as drawingChamfer, tt as sketchParametricFunction, u as translateDrawing, v as sketchRevolve, w as cameraLookAt, x as drawFaceOutline, y as sketchSweep, z as drawRoundedRectangle } from "./drawFns-Dp8HyMiw.js";
+import { $ as sketchFaceOffset, B as drawSingleCircle, C as cameraFromPlane, D as makeProjectedEdges, E as projectEdges, F as drawParametricFunction, G as loadFont, H as drawText, I as drawPointsInterpolation, J as textMetrics, K as sketchText, L as drawPolysides, M as draw, N as drawCircle, O as isProjectionPlane, P as drawEllipse, Q as sketchEllipse, R as drawRectangle, S as drawProjection, T as createCamera, U as fontMetrics, V as drawSingleEllipse, W as getFont, X as polysideInnerRadius, Y as makeBaseBox, Z as sketchCircle, _ as sketchLoft, a as drawingIntersect, b as sketchWires, c as rotateDrawing, d as compoundSketchExtrude, et as sketchHelix, f as compoundSketchFace, g as sketchFace, h as sketchExtrude, i as drawingFuse, it as sketchRoundedRectangle, j as deserializeDrawing, l as scaleDrawing, m as compoundSketchRevolve, n as drawingCut, nt as sketchPolysides, o as drawingToSketchOnPlane, ot as Sketches, p as compoundSketchLoft, q as textBlueprints, r as drawingFillet, rt as sketchRectangle, s as mirrorDrawing, st as CompoundSketch, t as drawingChamfer, tt as sketchParametricFunction, u as translateDrawing, v as sketchRevolve, w as cameraLookAt, x as drawFaceOutline, y as sketchSweep, z as drawRoundedRectangle } from "./drawFns-TaKrwQ13.js";
 import { r as makeCylinder } from "./solidBuilders-CQipZFOw.js";
 import { a as measureDistance, c as measureLinearProps, d as measureVolumeProps, i as measureCurvatureAtMid, l as measureSurfaceProps, n as measureArea, o as measureDistanceProps, r as measureCurvatureAt, s as measureLength, t as createDistanceQuery, u as measureVolume } from "./measureFns-Zc5RWsI4.js";
 import { t as cornerFinder } from "./cornerFinder-Ty3F7kPm.js";
-import { a as guidedSweep, c as sweep, i as complexExtrude, l as twistExtrude, n as extrudeAll, o as multiSectionSweep, r as revolve$1, s as supportExtrude, t as extrude$1 } from "./extrudeFns-DLdCPXMI.js";
-import { S as reverseCurve, _ as curve2dIsOnCurve, a as isInside2D, b as curve2dSplitAt, c as scale2D, d as stretch2D, f as toSVGPathD, g as curve2dFirstPoint, h as curve2dDistanceFrom, i as getOrientation2D, l as sketchOnFace2D, m as curve2dBoundingBox, n as createCompoundBlueprint, o as mirror2D, p as translate2D, r as getBounds2D, s as rotate2D, t as createBlueprint, u as sketchOnPlane2D, v as curve2dLastPoint, x as curve2dTangentAt, y as curve2dParameter } from "./blueprintFns-CVp-9asE.js";
+import { a as guidedSweep, c as sweep, i as complexExtrude, l as twistExtrude, n as extrudeAll, o as multiSectionSweep, r as revolve$1, s as supportExtrude, t as extrude$1 } from "./extrudeFns-ClsoGp5V.js";
+import { S as reverseCurve, _ as curve2dIsOnCurve, a as isInside2D, b as curve2dSplitAt, c as scale2D, d as stretch2D, f as toSVGPathD, g as curve2dFirstPoint, h as curve2dDistanceFrom, i as getOrientation2D, l as sketchOnFace2D, m as curve2dBoundingBox, n as createCompoundBlueprint, o as mirror2D, p as translate2D, r as getBounds2D, s as rotate2D, t as createBlueprint, u as sketchOnPlane2D, v as curve2dLastPoint, x as curve2dTangentAt, y as curve2dParameter } from "./blueprintFns-BngkSCmA.js";
 import { a as importSVG, c as blueprintToDXF, d as exportGltf, f as exportOBJ, i as exportSTEPConfigured, l as exportDXF, n as importSTEP, o as importSVGPathD, r as importSTL, s as exportThreeMF, t as importIGES, u as exportGlb } from "./importFns-C_PgMCn_.js";
 import { a as updateRoles, i as resolveRef, n as captureHint, o as defaultScorer, r as createRef, t as assignRoles } from "./shapeRefFns-Gv4-NGJD.js";
 import { a as createTaskQueue, c as isEmpty$1, d as isDisposeRequest, f as isErrorResponse, h as isSuccessResponse, i as createWorkerClient, l as pendingCount, m as isOperationRequest, n as createWorkerHandler, o as dequeueTask, p as isInitRequest, r as registerHandler, s as enqueueTask, t as createOperationRegistry, u as rejectAll } from "./workerHandler-Dm0_0F8Z.js";

package/dist/{drawFns-DVuvL7aY.cjs → drawFns-C1XeyF0v.cjs}

@@ -39,12 +39,12 @@ const require_planeOps = require("./planeOps-BJOIbn4K.cjs");
 const require_curveFns = require("./curveFns-Bukd9jhv.cjs");
 const require_arrayAccess = require("./arrayAccess-DsnQpdSD.cjs");
 const require_surfaceBuilders = require("./surfaceBuilders-DzTJA3fK.cjs");
-const require_boolean2D = require("./boolean2D-DpWRnTXy.cjs");
+const require_boolean2D = require("./boolean2D-THA5506z.cjs");
 const require_helpers = require("./helpers-BFyEt7Fv.cjs");
 const require_blueprint = require("./blueprint-CbD0PYLr.cjs");
 const require_solidBuilders = require("./solidBuilders-DI9d6ZIx.cjs");
 const require_cornerFinder = require("./cornerFinder-4PxIzwrl.cjs");
-const require_extrudeFns = require("./extrudeFns-YdWmD0Tw.cjs");
+const require_extrudeFns = require("./extrudeFns-BjfEBgIw.cjs");
 let opentype_js = require("opentype.js");
 opentype_js = __toESM(opentype_js);
 //#region src/2d/lib/stitching.ts

package/dist/{drawFns-Dp8HyMiw.js → drawFns-TaKrwQ13.js}

@@ -8,12 +8,12 @@ import { a as planeToWorld, o as resolvePlane } from "./planeOps-sTrM3dcQ.js";
 import { m as offsetWire2D } from "./curveFns-Dn4gbNzG.js";
 import { n as getAtOrThrow, r as lastOrThrow, t as firstOrThrow } from "./arrayAccess-tCIbjLs5.js";
 import { c as makeBSplineApproximation, d as makeEllipse, p as makeHelix, r as makeFace, s as assembleWire, t as addHolesInFace, u as makeCircle } from "./surfaceBuilders-Im6Xef27.js";
-import { S as Flatbush, _ as Blueprints, b as make2dOffset, c as roundedRectangleBlueprint, f as Sketch, g as CompoundBlueprint, h as organiseBlueprints, l as BaseSketcher2d, n as fuse2D, r as intersect2D, s as polysidesBlueprint, t as cut2D, u as BlueprintSketcher, v as chamferCurves, x as intersectCurves, y as filletCurves } from "./boolean2D-5FuQ5bn1.js";
+import { S as Flatbush, _ as Blueprints, b as make2dOffset, c as roundedRectangleBlueprint, f as Sketch, g as CompoundBlueprint, h as organiseBlueprints, l as BaseSketcher2d, n as fuse2D, r as intersect2D, s as polysidesBlueprint, t as cut2D, u as BlueprintSketcher, v as chamferCurves, x as intersectCurves, y as filletCurves } from "./boolean2D-B-l_kvhp.js";
 import { _ as samePoint$1, b as subtract2d, c as PRECISION_OFFSET, l as add2d, y as squareDistance2d } from "./helpers-XTeLX4mm.js";
 import { _ as Curve2D, a as edgeToCurve, c as make2dCircle, d as make2dInerpolatedBSplineCurve, f as make2dSegmentCurve, g as approximateAsSvgCompatibleCurve, i as curvesAsEdgesOnPlane, l as make2dEllipse, o as make2dArcFromCenter, t as Blueprint, v as deserializeCurve2D, y as BoundingBox2d } from "./blueprint-CM1OOluq.js";
 import { o as makeSolid, t as makeCompound } from "./solidBuilders-CQipZFOw.js";
 import { t as cornerFinder } from "./cornerFinder-Ty3F7kPm.js";
-import { i as complexExtrude, l as twistExtrude, r as revolve, t as extrude } from "./extrudeFns-DLdCPXMI.js";
+import { i as complexExtrude, l as twistExtrude, r as revolve, t as extrude } from "./extrudeFns-ClsoGp5V.js";
 import opentype from "opentype.js";
 //#region src/2d/lib/stitching.ts
 /**

package/dist/{extrudeFns-YdWmD0Tw.cjs → extrudeFns-BjfEBgIw.cjs}

@@ -15,7 +15,7 @@ const require_vecOps = require("./vecOps-CODplJp3.cjs");
 *   if the profile type is unsupported.
 */
 function buildLawFromProfile(extrusionLength, { profile, endFactor = 1 }) {
-	if (extrusionLength <= 0) return require_errors.err(require_errors.validationError("INVALID_EXTRUSION_LENGTH", "Extrusion length must be positive"));
+	if (extrusionLength < 1e-10) return require_errors.err(require_errors.validationError("INVALID_EXTRUSION_LENGTH", "Extrusion length too small (< 1e-10)"));
 	if (profile !== "s-curve" && profile !== "linear") return require_errors.err(require_errors.validationError("UNSUPPORTED_PROFILE", `Unsupported extrusion profile: ${String(profile)}`));
 	return require_errors.ok(require_shapeTypes.getKernel().buildExtrusionLaw(profile, extrusionLength, endFactor).Trim(0, extrusionLength, 1e-6));
 }

package/dist/{extrudeFns-DLdCPXMI.js → extrudeFns-ClsoGp5V.js}

@@ -15,7 +15,7 @@ import { c as vecLength, d as vecNormalize, t as vecAdd } from "./vecOps-B-PCHgy
 *   if the profile type is unsupported.
 */
 function buildLawFromProfile(extrusionLength, { profile, endFactor = 1 }) {
-	if (extrusionLength <= 0) return err(validationError("INVALID_EXTRUSION_LENGTH", "Extrusion length must be positive"));
+	if (extrusionLength < 1e-10) return err(validationError("INVALID_EXTRUSION_LENGTH", "Extrusion length too small (< 1e-10)"));
 	if (profile !== "s-curve" && profile !== "linear") return err(validationError("UNSUPPORTED_PROFILE", `Unsupported extrusion profile: ${String(profile)}`));
 	return ok(getKernel().buildExtrusionLaw(profile, extrusionLength, endFactor).Trim(0, extrusionLength, 1e-6));
 }

package/dist/operations.cjs

@@ -1,6 +1,6 @@
 Object.defineProperty(exports, Symbol.toStringTag, { value: "Module" });
 const require_historyFns = require("./historyFns-DBSgZGtF.cjs");
-const require_extrudeFns = require("./extrudeFns-YdWmD0Tw.cjs");
+const require_extrudeFns = require("./extrudeFns-BjfEBgIw.cjs");
 exports.addChild = require_historyFns.addChild;
 exports.addStep = require_historyFns.addStep;
 exports.circularPattern = require_historyFns.circularPattern;

package/dist/operations.js

@@ -1,3 +1,3 @@
 import { C as walkAssembly, D as exportAssemblySTEP, E as linearPattern, O as createAssembly, S as updateNode, T as gridPattern, _ as collectShapes, a as findStep, b as findNode, c as registerOperation, d as replayHistory, g as addChild, h as undoLast, l as registerShape, m as stepsFrom, n as createHistory, o as getShape, p as stepCount, r as createRegistry, s as modifyStep, t as addStep, u as replayFrom, v as countNodes, w as circularPattern, x as removeChild, y as createAssemblyNode } from "./historyFns-DltXL-vp.js";
-import { c as sweep, i as complexExtrude, l as twistExtrude, s as supportExtrude } from "./extrudeFns-DLdCPXMI.js";
+import { c as sweep, i as complexExtrude, l as twistExtrude, s as supportExtrude } from "./extrudeFns-ClsoGp5V.js";
 export { addChild, addStep, circularPattern, collectShapes, complexExtrude, countNodes, createAssembly, createAssemblyNode, createHistory, createRegistry, exportAssemblySTEP, findNode, findStep, getShape as getHistoryShape, gridPattern, linearPattern, modifyStep, registerOperation, registerShape, removeChild, replayFrom, replayHistory, stepCount, stepsFrom, supportExtrude, sweep, twistExtrude, undoLast, updateNode, walkAssembly };

package/dist/sketching.cjs

@@ -1,6 +1,6 @@
 Object.defineProperty(exports, Symbol.toStringTag, { value: "Module" });
-const require_drawFns = require("./drawFns-DVuvL7aY.cjs");
-const require_boolean2D = require("./boolean2D-DpWRnTXy.cjs");
+const require_drawFns = require("./drawFns-C1XeyF0v.cjs");
+const require_boolean2D = require("./boolean2D-THA5506z.cjs");
 //#region src/sketching.ts
 /**
 * brepjs/sketching — Sketcher, Drawing, and sketch-to-shape operations.

package/dist/sketching.js

@@ -1,5 +1,5 @@
-import { d as FaceSketcher, f as Sketch, l as BaseSketcher2d, u as BlueprintSketcher } from "./boolean2D-5FuQ5bn1.js";
-import { $ as sketchFaceOffset, A as DrawingPen, B as drawSingleCircle, F as drawParametricFunction, H as drawText, I as drawPointsInterpolation, L as drawPolysides, M as draw, N as drawCircle, P as drawEllipse, Q as sketchEllipse, R as drawRectangle, S as drawProjection, V as drawSingleEllipse, X as polysideInnerRadius, Y as makeBaseBox, Z as sketchCircle, _ as sketchLoft, a as drawingIntersect, at as Sketcher, b as sketchWires, c as rotateDrawing, d as compoundSketchExtrude, et as sketchHelix, f as compoundSketchFace, g as sketchFace, h as sketchExtrude, i as drawingFuse, it as sketchRoundedRectangle, j as deserializeDrawing, k as Drawing, l as scaleDrawing, m as compoundSketchRevolve, n as drawingCut, nt as sketchPolysides, o as drawingToSketchOnPlane, ot as Sketches, p as compoundSketchLoft, r as drawingFillet, rt as sketchRectangle, s as mirrorDrawing, st as CompoundSketch, t as drawingChamfer, tt as sketchParametricFunction, u as translateDrawing, v as sketchRevolve, x as drawFaceOutline, y as sketchSweep, z as drawRoundedRectangle } from "./drawFns-Dp8HyMiw.js";
+import { d as FaceSketcher, f as Sketch, l as BaseSketcher2d, u as BlueprintSketcher } from "./boolean2D-B-l_kvhp.js";
+import { $ as sketchFaceOffset, A as DrawingPen, B as drawSingleCircle, F as drawParametricFunction, H as drawText, I as drawPointsInterpolation, L as drawPolysides, M as draw, N as drawCircle, P as drawEllipse, Q as sketchEllipse, R as drawRectangle, S as drawProjection, V as drawSingleEllipse, X as polysideInnerRadius, Y as makeBaseBox, Z as sketchCircle, _ as sketchLoft, a as drawingIntersect, at as Sketcher, b as sketchWires, c as rotateDrawing, d as compoundSketchExtrude, et as sketchHelix, f as compoundSketchFace, g as sketchFace, h as sketchExtrude, i as drawingFuse, it as sketchRoundedRectangle, j as deserializeDrawing, k as Drawing, l as scaleDrawing, m as compoundSketchRevolve, n as drawingCut, nt as sketchPolysides, o as drawingToSketchOnPlane, ot as Sketches, p as compoundSketchLoft, r as drawingFillet, rt as sketchRectangle, s as mirrorDrawing, st as CompoundSketch, t as drawingChamfer, tt as sketchParametricFunction, u as translateDrawing, v as sketchRevolve, x as drawFaceOutline, y as sketchSweep, z as drawRoundedRectangle } from "./drawFns-TaKrwQ13.js";
 //#region src/sketching.ts
 /**
 * brepjs/sketching — Sketcher, Drawing, and sketch-to-shape operations.

package/package.json

@@ -1,6 +1,6 @@
 {
   "name": "brepjs",
-  "version": "15.2.8",
+  "version": "15.2.9",
   "description": "Web CAD library with pluggable geometry kernel",
   "keywords": [
     "cad",