brepjs 15.2.4 → 15.2.6

package/dist/2d.cjs

@@ -2,9 +2,9 @@ Object.defineProperty(exports, Symbol.toStringTag, { value: "Module" });
 const require_shapeTypes = require("./shapeTypes-Bfw136X-.cjs");
 const require_errors = require("./errors-CXRNVCec.cjs");
 const require_faceFns = require("./faceFns-CKL9Us23.cjs");
-const require_boolean2D = require("./boolean2D-C_vue9r7.cjs");
-const require_blueprint = require("./blueprint-CVDdCwvY.cjs");
-const require_blueprintFns = require("./blueprintFns-VagQe-2I.cjs");
+const require_boolean2D = require("./boolean2D-BuF_1i4D.cjs");
+const require_blueprint = require("./blueprint-DP00ES4B.cjs");
+const require_blueprintFns = require("./blueprintFns-DGoRLy3W.cjs");
 //#region src/core/curve2dHandle.ts
 /**
 * Wrap a raw kernel 2D curve handle with brand + disposal tracking.

package/dist/2d.js

@@ -1,9 +1,9 @@
 import { B as createKernelHandle, Z as getKernel2D, a as createEdge } from "./shapeTypes-Ct7W6h2X.js";
 import { A as ok, b as err, d as validationError, t as BrepErrorCode } from "./errors-DboJwVCf.js";
 import { z as kernelCallRaw } from "./faceFns-DMFG-piP.js";
-import { _ as Blueprints, a as fuseBlueprints, c as roundedRectangleBlueprint, g as CompoundBlueprint, h as organiseBlueprints, i as cutBlueprints, n as fuse2D, o as intersectBlueprints, r as intersect2D, s as polysidesBlueprint, t as cut2D } from "./boolean2D-_yG91bHX.js";
-import { _ as Curve2D, t as Blueprint, y as BoundingBox2d } from "./blueprint-DiLT1cjs.js";
-import { S as reverseCurve, _ as curve2dIsOnCurve, a as isInside2D, b as curve2dSplitAt, c as scale2D, d as stretch2D, f as toSVGPathD, g as curve2dFirstPoint, h as curve2dDistanceFrom, i as getOrientation2D, l as sketchOnFace2D, m as curve2dBoundingBox, o as mirror2D, p as translate2D, r as getBounds2D, s as rotate2D, t as createBlueprint, u as sketchOnPlane2D, v as curve2dLastPoint, x as curve2dTangentAt, y as curve2dParameter } from "./blueprintFns-1Ulj1yXX.js";
+import { _ as Blueprints, a as fuseBlueprints, c as roundedRectangleBlueprint, g as CompoundBlueprint, h as organiseBlueprints, i as cutBlueprints, n as fuse2D, o as intersectBlueprints, r as intersect2D, s as polysidesBlueprint, t as cut2D } from "./boolean2D-w_JU3qA6.js";
+import { _ as Curve2D, t as Blueprint, y as BoundingBox2d } from "./blueprint-Q1M0Jh2U.js";
+import { S as reverseCurve, _ as curve2dIsOnCurve, a as isInside2D, b as curve2dSplitAt, c as scale2D, d as stretch2D, f as toSVGPathD, g as curve2dFirstPoint, h as curve2dDistanceFrom, i as getOrientation2D, l as sketchOnFace2D, m as curve2dBoundingBox, o as mirror2D, p as translate2D, r as getBounds2D, s as rotate2D, t as createBlueprint, u as sketchOnPlane2D, v as curve2dLastPoint, x as curve2dTangentAt, y as curve2dParameter } from "./blueprintFns-CoRxbegA.js";
 //#region src/core/curve2dHandle.ts
 /**
 * Wrap a raw kernel 2D curve handle with brand + disposal tracking.

package/dist/{blueprint-CVDdCwvY.cjs → blueprint-DP00ES4B.cjs}

@@ -3,11 +3,11 @@ const require_errors = require("./errors-CXRNVCec.cjs");
 const require_faceFns = require("./faceFns-CKL9Us23.cjs");
 const require_constants = require("./constants-BNP_xnBN.cjs");
 const require_types = require("./types-gLi9wL0N.cjs");
-const require_planeOps = require("./planeOps-CuI-sDtn.cjs");
+const require_planeOps = require("./planeOps-BJOIbn4K.cjs");
 const require_curveFns = require("./curveFns-Bukd9jhv.cjs");
 const require_arrayAccess = require("./arrayAccess-DsnQpdSD.cjs");
 const require_surfaceBuilders = require("./surfaceBuilders-DzTJA3fK.cjs");
-const require_helpers = require("./helpers-B48K8Z6B.cjs");
+const require_helpers = require("./helpers-Csx69_Wn.cjs");
 //#region src/2d/lib/definitions.ts
 /** Type guard that checks whether a value is a `Point2D`. */
 function isPoint2D(point) {

package/dist/{blueprint-DiLT1cjs.js → blueprint-Q1M0Jh2U.js}

@@ -3,11 +3,11 @@ import { A as ok, R as unwrap, b as err, d as validationError, h as bug, n as co
 import { M as cast, m as uvCoordinates, n as faceCenter, p as uvBounds, r as faceGeomType } from "./faceFns-DMFG-piP.js";
 import { r as RAD2DEG, t as DEG2RAD } from "./constants-csSEYddm.js";
 import { r as toVec3 } from "./types--GD-LVc6.js";
-import { r as makePlane } from "./planeOps-Da2ylKGq.js";
+import { r as makePlane } from "./planeOps-sTrM3dcQ.js";
 import { f as getOrientation } from "./curveFns-Dn4gbNzG.js";
 import { n as getAtOrThrow, r as lastOrThrow, t as firstOrThrow } from "./arrayAccess-tCIbjLs5.js";
 import { r as makeFace } from "./surfaceBuilders-Im6Xef27.js";
-import { _ as samePoint, b as subtract2d, l as add2d, o as normalize2d, p as distance2d, t as getSingleFace, v as scalarMultiply2d } from "./helpers-B2J4sg4l.js";
+import { _ as samePoint, b as subtract2d, l as add2d, o as normalize2d, p as distance2d, t as getSingleFace, v as scalarMultiply2d } from "./helpers-CQgRNpa-.js";
 //#region src/2d/lib/definitions.ts
 /** Type guard that checks whether a value is a `Point2D`. */
 function isPoint2D(point) {

package/dist/{blueprintFns-1Ulj1yXX.js → blueprintFns-CoRxbegA.js}

@@ -1,6 +1,6 @@
 import { A as ok, b as err, d as validationError, t as BrepErrorCode } from "./errors-DboJwVCf.js";
-import { g as CompoundBlueprint } from "./boolean2D-_yG91bHX.js";
-import { t as Blueprint } from "./blueprint-DiLT1cjs.js";
+import { g as CompoundBlueprint } from "./boolean2D-w_JU3qA6.js";
+import { t as Blueprint } from "./blueprint-Q1M0Jh2U.js";
 //#region src/2d/lib/curve2dFns.ts
 /**
 * Return a reversed copy of the curve (non-mutating).

package/dist/{blueprintFns-VagQe-2I.cjs → blueprintFns-DGoRLy3W.cjs}

@@ -1,6 +1,6 @@
 const require_errors = require("./errors-CXRNVCec.cjs");
-const require_boolean2D = require("./boolean2D-C_vue9r7.cjs");
-const require_blueprint = require("./blueprint-CVDdCwvY.cjs");
+const require_boolean2D = require("./boolean2D-BuF_1i4D.cjs");
+const require_blueprint = require("./blueprint-DP00ES4B.cjs");
 //#region src/2d/lib/curve2dFns.ts
 /**
 * Return a reversed copy of the curve (non-mutating).

package/dist/{boolean2D-C_vue9r7.cjs → boolean2D-BuF_1i4D.cjs}

@@ -3,14 +3,14 @@ const require_errors = require("./errors-CXRNVCec.cjs");
 const require_faceFns = require("./faceFns-CKL9Us23.cjs");
 const require_constants = require("./constants-BNP_xnBN.cjs");
 const require_types = require("./types-gLi9wL0N.cjs");
-const require_vecOps = require("./vecOps-5bNB19nE.cjs");
-const require_planeOps = require("./planeOps-CuI-sDtn.cjs");
+const require_vecOps = require("./vecOps-CODplJp3.cjs");
+const require_planeOps = require("./planeOps-BJOIbn4K.cjs");
 const require_curveFns = require("./curveFns-Bukd9jhv.cjs");
 const require_arrayAccess = require("./arrayAccess-DsnQpdSD.cjs");
 const require_surfaceBuilders = require("./surfaceBuilders-DzTJA3fK.cjs");
-const require_helpers = require("./helpers-B48K8Z6B.cjs");
-const require_blueprint = require("./blueprint-CVDdCwvY.cjs");
-const require_extrudeFns = require("./extrudeFns-B588lxcH.cjs");
+const require_helpers = require("./helpers-Csx69_Wn.cjs");
+const require_blueprint = require("./blueprint-DP00ES4B.cjs");
+const require_extrudeFns = require("./extrudeFns-BQ9mhxB3.cjs");
 //#region node_modules/flatqueue/index.js
 /** @template T */
 var FlatQueue = class {
@@ -1323,7 +1323,7 @@ function radianAngle(ux, uy, vx, vy) {
 function convertSvgEllipseParams([x1, y1], [x2, y2], rx, ry, phi, fA, fS) {
 	if (rx < 0) rx = -rx;
 	if (ry < 0) ry = -ry;
-	if (rx === 0 || ry === 0) require_errors.bug("convertSvgEllipseParams", "rx and ry cannot be 0");
+	if (Math.abs(rx) < 1e-10 || Math.abs(ry) < 1e-10) require_errors.bug("convertSvgEllipseParams", "rx and ry cannot be 0");
 	const s_phi = Math.sin(phi);
 	const c_phi = Math.cos(phi);
 	const hd_x = (x1 - x2) / 2;

package/dist/{boolean2D-_yG91bHX.js → boolean2D-w_JU3qA6.js}

@@ -3,14 +3,14 @@ import { A as ok, R as unwrap, T as isOk, b as err, d as validationError, h as b
 import { N as downcast, c as normalAt, p as uvBounds, u as pointOnSurface } from "./faceFns-DMFG-piP.js";
 import { r as RAD2DEG, t as DEG2RAD } from "./constants-csSEYddm.js";
 import { r as toVec3 } from "./types--GD-LVc6.js";
-import { d as vecNormalize, h as vecScale, r as vecCross } from "./vecOps-DBmIPNhk.js";
-import { n as createPlane } from "./planeOps-Da2ylKGq.js";
+import { d as vecNormalize, h as vecScale, r as vecCross } from "./vecOps-B-PCHgyB.js";
+import { n as createPlane } from "./planeOps-sTrM3dcQ.js";
 import { c as curveStartPoint, l as curveTangentAt, r as curveIsClosed } from "./curveFns-Dn4gbNzG.js";
 import { r as lastOrThrow, t as firstOrThrow } from "./arrayAccess-tCIbjLs5.js";
 import { _ as zip, i as makeNewFaceWithinFace, r as makeFace, s as assembleWire } from "./surfaceBuilders-Im6Xef27.js";
-import { _ as samePoint$1, b as subtract2d, d as cartesianToPolar, f as crossProduct2d, g as rotate2d, h as polarToCartesian, l as add2d, m as polarAngle2d, o as normalize2d, p as distance2d, s as PRECISION_INTERSECTION, v as scalarMultiply2d } from "./helpers-B2J4sg4l.js";
-import { _ as Curve2D, b as removeDuplicatePoints, c as make2dCircle, f as make2dSegmentCurve, h as approximateAsBSpline, m as make2dThreePointArc, n as asSVG, o as make2dArcFromCenter, p as make2dTangentArc, r as viewbox, s as make2dBezierCurve, t as Blueprint, u as make2dEllipseArc, x as isPoint2D, y as BoundingBox2d } from "./blueprint-DiLT1cjs.js";
-import { c as sweep, i as complexExtrude, l as twistExtrude, r as revolve, t as extrude } from "./extrudeFns-DjfHvYJe.js";
+import { _ as samePoint$1, b as subtract2d, d as cartesianToPolar, f as crossProduct2d, g as rotate2d, h as polarToCartesian, l as add2d, m as polarAngle2d, o as normalize2d, p as distance2d, s as PRECISION_INTERSECTION, v as scalarMultiply2d } from "./helpers-CQgRNpa-.js";
+import { _ as Curve2D, b as removeDuplicatePoints, c as make2dCircle, f as make2dSegmentCurve, h as approximateAsBSpline, m as make2dThreePointArc, n as asSVG, o as make2dArcFromCenter, p as make2dTangentArc, r as viewbox, s as make2dBezierCurve, t as Blueprint, u as make2dEllipseArc, x as isPoint2D, y as BoundingBox2d } from "./blueprint-Q1M0Jh2U.js";
+import { c as sweep, i as complexExtrude, l as twistExtrude, r as revolve, t as extrude } from "./extrudeFns-yCZ6ZNQy.js";
 //#region node_modules/flatqueue/index.js
 /** @template T */
 var FlatQueue = class {
@@ -1323,7 +1323,7 @@ function radianAngle(ux, uy, vx, vy) {
 function convertSvgEllipseParams([x1, y1], [x2, y2], rx, ry, phi, fA, fS) {
 	if (rx < 0) rx = -rx;
 	if (ry < 0) ry = -ry;
-	if (rx === 0 || ry === 0) bug("convertSvgEllipseParams", "rx and ry cannot be 0");
+	if (Math.abs(rx) < 1e-10 || Math.abs(ry) < 1e-10) bug("convertSvgEllipseParams", "rx and ry cannot be 0");
 	const s_phi = Math.sin(phi);
 	const c_phi = Math.cos(phi);
 	const hd_x = (x1 - x2) / 2;

package/dist/{booleanFns-C7c98iPH.cjs → booleanFns-CQNV8MMq.cjs}

@@ -2,8 +2,8 @@ const require_shapeTypes = require("./shapeTypes-Bfw136X-.cjs");
 const require_errors = require("./errors-CXRNVCec.cjs");
 const require_faceFns = require("./faceFns-CKL9Us23.cjs");
 const require_constants = require("./constants-BNP_xnBN.cjs");
-const require_vecOps = require("./vecOps-5bNB19nE.cjs");
-const require_planeOps = require("./planeOps-CuI-sDtn.cjs");
+const require_vecOps = require("./vecOps-CODplJp3.cjs");
+const require_planeOps = require("./planeOps-BJOIbn4K.cjs");
 const require_shapeFns = require("./shapeFns-DkFzoJav.cjs");
 const require_arrayAccess = require("./arrayAccess-DsnQpdSD.cjs");
 const require_surfaceBuilders = require("./surfaceBuilders-DzTJA3fK.cjs");

package/dist/{booleanFns-QZtMt5Aa.js → booleanFns-D_DVbfzR.js}

@@ -2,8 +2,8 @@ import { X as getKernel, h as isShape3D, t as castShape } from "./shapeTypes-Ct7
 import { A as ok, R as unwrap, b as err, d as validationError, i as kernelError, l as typeCastError, t as BrepErrorCode, w as isErr } from "./errors-DboJwVCf.js";
 import { C as getVertices, b as getEdges, w as getWires } from "./faceFns-DMFG-piP.js";
 import { n as HASH_CODE_MAX } from "./constants-csSEYddm.js";
-import { h as vecScale, t as vecAdd } from "./vecOps-DBmIPNhk.js";
-import { o as resolvePlane } from "./planeOps-Da2ylKGq.js";
+import { h as vecScale, t as vecAdd } from "./vecOps-B-PCHgyB.js";
+import { o as resolvePlane } from "./planeOps-sTrM3dcQ.js";
 import { _ as propagateAllMetadata, g as collectInputFaceHashes, v as propagateMetadataByHash } from "./shapeFns-QGgHStIU.js";
 import { n as getAtOrThrow, t as firstOrThrow } from "./arrayAccess-tCIbjLs5.js";
 import { r as makeFace } from "./surfaceBuilders-Im6Xef27.js";

package/dist/brepjs.cjs

@@ -1,29 +1,29 @@
 Object.defineProperty(exports, Symbol.toStringTag, { value: "Module" });
-const require_drawFns = require("./drawFns-mX41AgJp.cjs");
+const require_drawFns = require("./drawFns-Bk7kfVmD.cjs");
 const require_shapeTypes = require("./shapeTypes-Bfw136X-.cjs");
 const require_occtWasmAdapter = require("./occtWasmAdapter-CPINzXxh.cjs");
 const require_errors = require("./errors-CXRNVCec.cjs");
 const require_faceFns = require("./faceFns-CKL9Us23.cjs");
 const require_constants = require("./constants-BNP_xnBN.cjs");
 const require_types = require("./types-gLi9wL0N.cjs");
-const require_vecOps = require("./vecOps-5bNB19nE.cjs");
-const require_planeOps = require("./planeOps-CuI-sDtn.cjs");
+const require_vecOps = require("./vecOps-CODplJp3.cjs");
+const require_planeOps = require("./planeOps-BJOIbn4K.cjs");
 const require_shapeFns = require("./shapeFns-DkFzoJav.cjs");
 const require_curveFns = require("./curveFns-Bukd9jhv.cjs");
 const require_meshFns = require("./meshFns-CO9qVJ24.cjs");
 const require_arrayAccess = require("./arrayAccess-DsnQpdSD.cjs");
 const require_surfaceBuilders = require("./surfaceBuilders-DzTJA3fK.cjs");
-const require_booleanFns = require("./booleanFns-C7c98iPH.cjs");
-const require_primitiveFns = require("./primitiveFns-CriBoS7M.cjs");
-const require_historyFns = require("./historyFns-Bxg4_ieD.cjs");
-const require_boolean2D = require("./boolean2D-C_vue9r7.cjs");
-const require_helpers = require("./helpers-B48K8Z6B.cjs");
+const require_booleanFns = require("./booleanFns-CQNV8MMq.cjs");
+const require_primitiveFns = require("./primitiveFns-CVcoZURM.cjs");
+const require_historyFns = require("./historyFns-DBSgZGtF.cjs");
+const require_boolean2D = require("./boolean2D-BuF_1i4D.cjs");
+const require_helpers = require("./helpers-Csx69_Wn.cjs");
 const require_solidBuilders = require("./solidBuilders-DI9d6ZIx.cjs");
 const require_measureFns = require("./measureFns-C2SnZLhD.cjs");
-const require_cornerFinder = require("./cornerFinder-DP1-TfDV.cjs");
-const require_extrudeFns = require("./extrudeFns-B588lxcH.cjs");
-const require_blueprintFns = require("./blueprintFns-VagQe-2I.cjs");
-const require_importFns = require("./importFns-UkXALkBs.cjs");
+const require_cornerFinder = require("./cornerFinder-t0r0NiIf.cjs");
+const require_extrudeFns = require("./extrudeFns-BQ9mhxB3.cjs");
+const require_blueprintFns = require("./blueprintFns-DGoRLy3W.cjs");
+const require_importFns = require("./importFns-m2IJXUsB.cjs");
 const require_shapeRefFns = require("./shapeRefFns-t-5-Aqku.cjs");
 const require_workerHandler = require("./workerHandler-C-3cFcsQ.cjs");
 //#region src/topology/shapeBooleans.ts
@@ -1082,7 +1082,7 @@ function buildSkeletonTriFaces(skeleton, tanAngle, kernel) {
 * @returns A Result containing the roof Solid, or an error
 */
 function roof(w, options) {
-	const angle = (options?.angle ?? 45) * (Math.PI / 180);
+	const angle = (options?.angle ?? 45) * require_constants.DEG2RAD;
 	const tanAngle = Math.tan(angle);
 	try {
 		const polygon = extractPolygon(w);

package/dist/brepjs.js

@@ -4,25 +4,25 @@ import { A as ok, B as unwrapOr, C as fromNullable, D as mapBoth, E as map, F as
 import { A as vertexPosition, B as kernelCallScoped, C as getVertices, D as iterFaces, E as iterEdges, F as isCompSolid, I as iterTopo, L as shapeType, M as cast, N as downcast, O as iterVertices, P as fromBREP, R as kernelCall, T as invalidateShapeCache, a as flipFaceOrientation, b as getEdges, c as normalAt, d as projectPointOnFace, f as removeHolesFromFace, g as getBounds, h as describe$1, i as faceOrientation, j as asTopo, k as iterWires, l as outerWire, m as uvCoordinates, n as faceCenter, o as getSurfaceType, p as uvBounds, r as faceGeomType, s as innerWires, t as classifyPointOnFace, u as pointOnSurface, w as getWires, x as getFaces, y as getCachedSurfaceType, z as kernelCallRaw } from "./faceFns-DMFG-piP.js";
 import { n as HASH_CODE_MAX, r as RAD2DEG, t as DEG2RAD } from "./constants-csSEYddm.js";
 import { n as toVec2, r as toVec3, t as resolveDirection } from "./types--GD-LVc6.js";
-import { a as vecDot, c as vecLength, d as vecNormalize, f as vecProjectToPlane, g as vecSub, h as vecScale, i as vecDistance, l as vecLengthSq, m as vecRotate, n as vecAngle, o as vecEquals, p as vecRepr, r as vecCross, s as vecIsZero, t as vecAdd, u as vecNegate } from "./vecOps-DBmIPNhk.js";
-import { i as pivotPlane, n as createPlane, o as resolvePlane, r as makePlane, s as translatePlane, t as createNamedPlane } from "./planeOps-Da2ylKGq.js";
+import { a as vecDot, c as vecLength, d as vecNormalize, f as vecProjectToPlane, g as vecSub, h as vecScale, i as vecDistance, l as vecLengthSq, m as vecRotate, n as vecAngle, o as vecEquals, p as vecRepr, r as vecCross, s as vecIsZero, t as vecAdd, u as vecNegate } from "./vecOps-B-PCHgyB.js";
+import { i as pivotPlane, n as createPlane, o as resolvePlane, r as makePlane, s as translatePlane, t as createNamedPlane } from "./planeOps-sTrM3dcQ.js";
 import { C as findFacesByTag, D as tagFaces, E as setTagMetadata, O as getFaceOrigins, S as getShapeColor, T as getTagMetadata, a as isSameShape, b as colorShape, c as applyMatrix$1, d as resize, f as rotate$1, h as translate$1, i as isEqualShape, k as setShapeOrigin, l as composeTransforms, m as transformCopy$1, n as getHashCode, o as simplify$1, p as scale$1, r as isEmpty$2, s as toBREP$1, t as clone$1, u as mirror$1, w as getFaceTags, x as getFaceColor, y as colorFaces } from "./shapeFns-QGgHStIU.js";
 import { a as curveLength, c as curveStartPoint, d as getCurveType, f as getOrientation, i as curveIsPeriodic, l as curveTangentAt, m as offsetWire2D, n as curveEndPoint, o as curvePeriod, p as interpolateCurve, r as curveIsClosed, s as curvePointAt, t as approximateCurve, u as flipOrientation } from "./curveFns-Dn4gbNzG.js";
 import { a as meshEdges$1, c as createMeshCache, i as mesh$1, n as exportSTEP, o as meshMultiLOD, r as exportSTL, s as clearMeshCache, t as exportIGES } from "./meshFns-gTPomZkK.js";
 import { n as getAtOrThrow, t as firstOrThrow } from "./arrayAccess-tCIbjLs5.js";
 import { n as fill, r as makeFace } from "./surfaceBuilders-Im6Xef27.js";
-import { a as fuseAll, c as sectionToFace$1, i as fuse$1, l as slice$1, n as cut$1, o as intersect$1, r as cutAll, s as section$1, t as booleanPipeline, u as split$1 } from "./booleanFns-QZtMt5Aa.js";
-import { $ as getNurbsSurfaceData, A as fixShape, B as offset$1, C as threePointArc, D as wireLoop, E as wire, F as isValid$1, G as chamferWithEvolution, H as thicken$1, I as solidFromShell, J as fuseWithEvolution, K as cutWithEvolution, L as chamfer$1, M as healFace, N as healSolid, O as autoHeal, P as healWire, Q as getNurbsCurveData, R as draft$1, S as tangentArc, T as vertex, U as variableFillet, V as shell$1, W as positionOnCurve, X as shellWithEvolution, Y as intersectWithEvolution, Z as checkBoolean, _ as polygon, a as circle, at as wiresOfFace, b as sphere, c as cylinder, ct as toGroupedBufferGeometryData, d as ellipsoid, et as adjacentFaces, f as face, g as offsetFace, h as line, i as bsplineApprox, it as verticesOfEdge, j as heal$1, k as fixSelfIntersection, l as ellipse, lt as toLODGeometryData, m as helix, n as bezier, nt as facesOfEdge, o as compound, ot as chamferDistAngle, p as filledFace, q as filletWithEvolution, r as box, rt as sharedEdges, s as cone, st as toBufferGeometryData, t as addHoles, tt as edgesOfFace, u as ellipseArc, ut as toLineGeometryData, v as sewShells, w as torus, x as subFace, y as solid, z as fillet$1 } from "./primitiveFns-CtWBTFPI.js";
-import { C as walkAssembly, D as exportAssemblySTEP, E as linearPattern, O as createAssembly, S as updateNode, _ as collectShapes, a as findStep, b as findNode, c as registerOperation, d as replayHistory, f as serializeHistory, g as addChild, h as undoLast, i as deserializeHistory, l as registerShape, m as stepsFrom, n as createHistory, o as getShape, p as stepCount, r as createRegistry, s as modifyStep, t as addStep, u as replayFrom, v as countNodes, w as circularPattern, x as removeChild, y as createAssemblyNode } from "./historyFns-BpfArwQu.js";
-import { a as fuseBlueprints, c as roundedRectangleBlueprint, f as Sketch, h as organiseBlueprints, i as cutBlueprints, m as loftAll, n as fuse2D, o as intersectBlueprints, p as loft$1, r as intersect2D, s as polysidesBlueprint, t as cut2D } from "./boolean2D-_yG91bHX.js";
-import { a as createTypedFinder, i as wireFinder, n as edgeFinder, r as faceFinder, t as getSingleFace } from "./helpers-B2J4sg4l.js";
-import { $ as sketchFaceOffset, B as drawSingleCircle, C as cameraFromPlane, D as makeProjectedEdges, E as projectEdges, F as drawParametricFunction, G as loadFont, H as drawText, I as drawPointsInterpolation, J as textMetrics, K as sketchText, L as drawPolysides, M as draw, N as drawCircle, O as isProjectionPlane, P as drawEllipse, Q as sketchEllipse, R as drawRectangle, S as drawProjection, T as createCamera, U as fontMetrics, V as drawSingleEllipse, W as getFont, X as polysideInnerRadius, Y as makeBaseBox, Z as sketchCircle, _ as sketchLoft, a as drawingIntersect, b as sketchWires, c as rotateDrawing, d as compoundSketchExtrude, et as sketchHelix, f as compoundSketchFace, g as sketchFace, h as sketchExtrude, i as drawingFuse, it as sketchRoundedRectangle, j as deserializeDrawing, l as scaleDrawing, m as compoundSketchRevolve, n as drawingCut, nt as sketchPolysides, o as drawingToSketchOnPlane, ot as Sketches, p as compoundSketchLoft, q as textBlueprints, r as drawingFillet, rt as sketchRectangle, s as mirrorDrawing, st as CompoundSketch, t as drawingChamfer, tt as sketchParametricFunction, u as translateDrawing, v as sketchRevolve, w as cameraLookAt, x as drawFaceOutline, y as sketchSweep, z as drawRoundedRectangle } from "./drawFns-BIFwKDPT.js";
+import { a as fuseAll, c as sectionToFace$1, i as fuse$1, l as slice$1, n as cut$1, o as intersect$1, r as cutAll, s as section$1, t as booleanPipeline, u as split$1 } from "./booleanFns-D_DVbfzR.js";
+import { $ as getNurbsSurfaceData, A as fixShape, B as offset$1, C as threePointArc, D as wireLoop, E as wire, F as isValid$1, G as chamferWithEvolution, H as thicken$1, I as solidFromShell, J as fuseWithEvolution, K as cutWithEvolution, L as chamfer$1, M as healFace, N as healSolid, O as autoHeal, P as healWire, Q as getNurbsCurveData, R as draft$1, S as tangentArc, T as vertex, U as variableFillet, V as shell$1, W as positionOnCurve, X as shellWithEvolution, Y as intersectWithEvolution, Z as checkBoolean, _ as polygon, a as circle, at as wiresOfFace, b as sphere, c as cylinder, ct as toGroupedBufferGeometryData, d as ellipsoid, et as adjacentFaces, f as face, g as offsetFace, h as line, i as bsplineApprox, it as verticesOfEdge, j as heal$1, k as fixSelfIntersection, l as ellipse, lt as toLODGeometryData, m as helix, n as bezier, nt as facesOfEdge, o as compound, ot as chamferDistAngle, p as filledFace, q as filletWithEvolution, r as box, rt as sharedEdges, s as cone, st as toBufferGeometryData, t as addHoles, tt as edgesOfFace, u as ellipseArc, ut as toLineGeometryData, v as sewShells, w as torus, x as subFace, y as solid, z as fillet$1 } from "./primitiveFns-DZBVfdNl.js";
+import { C as walkAssembly, D as exportAssemblySTEP, E as linearPattern, O as createAssembly, S as updateNode, _ as collectShapes, a as findStep, b as findNode, c as registerOperation, d as replayHistory, f as serializeHistory, g as addChild, h as undoLast, i as deserializeHistory, l as registerShape, m as stepsFrom, n as createHistory, o as getShape, p as stepCount, r as createRegistry, s as modifyStep, t as addStep, u as replayFrom, v as countNodes, w as circularPattern, x as removeChild, y as createAssemblyNode } from "./historyFns-DltXL-vp.js";
+import { a as fuseBlueprints, c as roundedRectangleBlueprint, f as Sketch, h as organiseBlueprints, i as cutBlueprints, m as loftAll, n as fuse2D, o as intersectBlueprints, p as loft$1, r as intersect2D, s as polysidesBlueprint, t as cut2D } from "./boolean2D-w_JU3qA6.js";
+import { a as createTypedFinder, i as wireFinder, n as edgeFinder, r as faceFinder, t as getSingleFace } from "./helpers-CQgRNpa-.js";
+import { $ as sketchFaceOffset, B as drawSingleCircle, C as cameraFromPlane, D as makeProjectedEdges, E as projectEdges, F as drawParametricFunction, G as loadFont, H as drawText, I as drawPointsInterpolation, J as textMetrics, K as sketchText, L as drawPolysides, M as draw, N as drawCircle, O as isProjectionPlane, P as drawEllipse, Q as sketchEllipse, R as drawRectangle, S as drawProjection, T as createCamera, U as fontMetrics, V as drawSingleEllipse, W as getFont, X as polysideInnerRadius, Y as makeBaseBox, Z as sketchCircle, _ as sketchLoft, a as drawingIntersect, b as sketchWires, c as rotateDrawing, d as compoundSketchExtrude, et as sketchHelix, f as compoundSketchFace, g as sketchFace, h as sketchExtrude, i as drawingFuse, it as sketchRoundedRectangle, j as deserializeDrawing, l as scaleDrawing, m as compoundSketchRevolve, n as drawingCut, nt as sketchPolysides, o as drawingToSketchOnPlane, ot as Sketches, p as compoundSketchLoft, q as textBlueprints, r as drawingFillet, rt as sketchRectangle, s as mirrorDrawing, st as CompoundSketch, t as drawingChamfer, tt as sketchParametricFunction, u as translateDrawing, v as sketchRevolve, w as cameraLookAt, x as drawFaceOutline, y as sketchSweep, z as drawRoundedRectangle } from "./drawFns-CNPmD8PK.js";
 import { r as makeCylinder } from "./solidBuilders-CQipZFOw.js";
 import { a as measureDistance, c as measureLinearProps, d as measureVolumeProps, i as measureCurvatureAtMid, l as measureSurfaceProps, n as measureArea, o as measureDistanceProps, r as measureCurvatureAt, s as measureLength, t as createDistanceQuery, u as measureVolume } from "./measureFns-Zc5RWsI4.js";
-import { t as cornerFinder } from "./cornerFinder-CvF2SrsV.js";
-import { a as guidedSweep, c as sweep, i as complexExtrude, l as twistExtrude, n as extrudeAll, o as multiSectionSweep, r as revolve$1, s as supportExtrude, t as extrude$1 } from "./extrudeFns-DjfHvYJe.js";
-import { S as reverseCurve, _ as curve2dIsOnCurve, a as isInside2D, b as curve2dSplitAt, c as scale2D, d as stretch2D, f as toSVGPathD, g as curve2dFirstPoint, h as curve2dDistanceFrom, i as getOrientation2D, l as sketchOnFace2D, m as curve2dBoundingBox, n as createCompoundBlueprint, o as mirror2D, p as translate2D, r as getBounds2D, s as rotate2D, t as createBlueprint, u as sketchOnPlane2D, v as curve2dLastPoint, x as curve2dTangentAt, y as curve2dParameter } from "./blueprintFns-1Ulj1yXX.js";
-import { a as importSVG, c as blueprintToDXF, d as exportGltf, f as exportOBJ, i as exportSTEPConfigured, l as exportDXF, n as importSTEP, o as importSVGPathD, r as importSTL, s as exportThreeMF, t as importIGES, u as exportGlb } from "./importFns-D6eumXiz.js";
+import { t as cornerFinder } from "./cornerFinder-CNpqIRvK.js";
+import { a as guidedSweep, c as sweep, i as complexExtrude, l as twistExtrude, n as extrudeAll, o as multiSectionSweep, r as revolve$1, s as supportExtrude, t as extrude$1 } from "./extrudeFns-yCZ6ZNQy.js";
+import { S as reverseCurve, _ as curve2dIsOnCurve, a as isInside2D, b as curve2dSplitAt, c as scale2D, d as stretch2D, f as toSVGPathD, g as curve2dFirstPoint, h as curve2dDistanceFrom, i as getOrientation2D, l as sketchOnFace2D, m as curve2dBoundingBox, n as createCompoundBlueprint, o as mirror2D, p as translate2D, r as getBounds2D, s as rotate2D, t as createBlueprint, u as sketchOnPlane2D, v as curve2dLastPoint, x as curve2dTangentAt, y as curve2dParameter } from "./blueprintFns-CoRxbegA.js";
+import { a as importSVG, c as blueprintToDXF, d as exportGltf, f as exportOBJ, i as exportSTEPConfigured, l as exportDXF, n as importSTEP, o as importSVGPathD, r as importSTL, s as exportThreeMF, t as importIGES, u as exportGlb } from "./importFns-CcTs485L.js";
 import { a as updateRoles, i as resolveRef, n as captureHint, o as defaultScorer, r as createRef, t as assignRoles } from "./shapeRefFns-Gv4-NGJD.js";
 import { a as createTaskQueue, c as isEmpty$1, d as isDisposeRequest, f as isErrorResponse, h as isSuccessResponse, i as createWorkerClient, l as pendingCount, m as isOperationRequest, n as createWorkerHandler, o as dequeueTask, p as isInitRequest, r as registerHandler, s as enqueueTask, t as createOperationRegistry, u as rejectAll } from "./workerHandler-Dm0_0F8Z.js";
 //#region \0rolldown/runtime.js
@@ -1093,7 +1093,7 @@ function buildSkeletonTriFaces(skeleton, tanAngle, kernel) {
 * @returns A Result containing the roof Solid, or an error
 */
 function roof(w, options) {
-	const angle = (options?.angle ?? 45) * (Math.PI / 180);
+	const angle = (options?.angle ?? 45) * DEG2RAD;
 	const tanAngle = Math.tan(angle);
 	try {
 		const polygon = extractPolygon(w);

package/dist/core.cjs

@@ -3,8 +3,8 @@ const require_shapeTypes = require("./shapeTypes-Bfw136X-.cjs");
 const require_errors = require("./errors-CXRNVCec.cjs");
 const require_constants = require("./constants-BNP_xnBN.cjs");
 const require_types = require("./types-gLi9wL0N.cjs");
-const require_vecOps = require("./vecOps-5bNB19nE.cjs");
-const require_planeOps = require("./planeOps-CuI-sDtn.cjs");
+const require_vecOps = require("./vecOps-CODplJp3.cjs");
+const require_planeOps = require("./planeOps-BJOIbn4K.cjs");
 exports.BrepBugError = require_errors.BrepBugError;
 exports.DEG2RAD = require_constants.DEG2RAD;
 exports.DisposalScope = require_shapeTypes.DisposalScope;

package/dist/core.js

@@ -2,6 +2,6 @@ import { B as createKernelHandle, C as isOrientedFace, D as manifoldShell, E as
 import { A as ok, B as unwrapOr, E as map, I as tryCatch, L as tryCatchAsync, O as mapErr, R as unwrap, T as isOk, V as unwrapOrElse, a as moduleInitError, b as err, c as sketcherStateError, d as validationError, g as OK, h as bug, i as kernelError, k as match, l as typeCastError, m as BrepBugError, n as computationError, o as queryError, r as ioError, u as unsupportedError, v as andThen, w as isErr, x as flatMap, y as collect, z as unwrapErr } from "./errors-DboJwVCf.js";
 import { n as HASH_CODE_MAX, r as RAD2DEG, t as DEG2RAD } from "./constants-csSEYddm.js";
 import { n as toVec2, r as toVec3, t as resolveDirection } from "./types--GD-LVc6.js";
-import { a as vecDot, c as vecLength, d as vecNormalize, f as vecProjectToPlane, g as vecSub, h as vecScale, i as vecDistance, l as vecLengthSq, m as vecRotate, n as vecAngle, o as vecEquals, p as vecRepr, r as vecCross, s as vecIsZero, t as vecAdd, u as vecNegate } from "./vecOps-DBmIPNhk.js";
-import { i as pivotPlane, n as createPlane, o as resolvePlane, s as translatePlane, t as createNamedPlane } from "./planeOps-Da2ylKGq.js";
+import { a as vecDot, c as vecLength, d as vecNormalize, f as vecProjectToPlane, g as vecSub, h as vecScale, i as vecDistance, l as vecLengthSq, m as vecRotate, n as vecAngle, o as vecEquals, p as vecRepr, r as vecCross, s as vecIsZero, t as vecAdd, u as vecNegate } from "./vecOps-B-PCHgyB.js";
+import { i as pivotPlane, n as createPlane, o as resolvePlane, s as translatePlane, t as createNamedPlane } from "./planeOps-sTrM3dcQ.js";
 export { BrepBugError, DEG2RAD, DisposalScope, HASH_CODE_MAX, OK, RAD2DEG, andThen, bug, castShape, closedWire, collect, computationError, createHandle, createKernelHandle, createNamedPlane, createPlane, err, flatMap, getShapeKind, ioError, is2D, is3D, isClosedWire, isCompound, isEdge, isErr, isFace, isLive, isManifoldShell, isOk, isOrientedFace, isShape1D, isShape3D, isShell, isSolid, isValidSolid, isVertex, isWire, kernelError, manifoldShell, map, mapErr, match, moduleInitError, ok, orientedFace, pivotPlane, queryError, resolveDirection, resolvePlane, sketcherStateError, toVec2, toVec3, translatePlane, tryCatch, tryCatchAsync, typeCastError, unsupportedError, unwrap, unwrapErr, unwrapOr, unwrapOrElse, validSolid, validationError, vecAdd, vecAngle, vecCross, vecDistance, vecDot, vecEquals, vecIsZero, vecLength, vecLengthSq, vecNegate, vecNormalize, vecProjectToPlane, vecRepr, vecRotate, vecScale, vecSub, withScope, withScopeResult, withScopeResultAsync };

package/dist/{cornerFinder-CvF2SrsV.js → cornerFinder-CNpqIRvK.js}

@@ -1,6 +1,6 @@
 import { t as DEG2RAD } from "./constants-csSEYddm.js";
 import { n as getAtOrThrow } from "./arrayAccess-tCIbjLs5.js";
-import { _ as samePoint, p as distance2d, u as angle2d } from "./helpers-B2J4sg4l.js";
+import { _ as samePoint, p as distance2d, u as angle2d } from "./helpers-CQgRNpa-.js";
 //#region src/query/cornerFinder.ts
 var PI_2 = 2 * Math.PI;
 function positiveHalfAngle(angle) {

package/dist/{cornerFinder-DP1-TfDV.cjs → cornerFinder-t0r0NiIf.cjs}

@@ -1,6 +1,6 @@
 const require_constants = require("./constants-BNP_xnBN.cjs");
 const require_arrayAccess = require("./arrayAccess-DsnQpdSD.cjs");
-const require_helpers = require("./helpers-B48K8Z6B.cjs");
+const require_helpers = require("./helpers-Csx69_Wn.cjs");
 //#region src/query/cornerFinder.ts
 var PI_2 = 2 * Math.PI;
 function positiveHalfAngle(angle) {

package/dist/{drawFns-mX41AgJp.cjs → drawFns-Bk7kfVmD.cjs}

@@ -34,17 +34,17 @@ const require_errors = require("./errors-CXRNVCec.cjs");
 const require_faceFns = require("./faceFns-CKL9Us23.cjs");
 const require_constants = require("./constants-BNP_xnBN.cjs");
 const require_types = require("./types-gLi9wL0N.cjs");
-const require_vecOps = require("./vecOps-5bNB19nE.cjs");
-const require_planeOps = require("./planeOps-CuI-sDtn.cjs");
+const require_vecOps = require("./vecOps-CODplJp3.cjs");
+const require_planeOps = require("./planeOps-BJOIbn4K.cjs");
 const require_curveFns = require("./curveFns-Bukd9jhv.cjs");
 const require_arrayAccess = require("./arrayAccess-DsnQpdSD.cjs");
 const require_surfaceBuilders = require("./surfaceBuilders-DzTJA3fK.cjs");
-const require_boolean2D = require("./boolean2D-C_vue9r7.cjs");
-const require_helpers = require("./helpers-B48K8Z6B.cjs");
-const require_blueprint = require("./blueprint-CVDdCwvY.cjs");
+const require_boolean2D = require("./boolean2D-BuF_1i4D.cjs");
+const require_helpers = require("./helpers-Csx69_Wn.cjs");
+const require_blueprint = require("./blueprint-DP00ES4B.cjs");
 const require_solidBuilders = require("./solidBuilders-DI9d6ZIx.cjs");
-const require_cornerFinder = require("./cornerFinder-DP1-TfDV.cjs");
-const require_extrudeFns = require("./extrudeFns-B588lxcH.cjs");
+const require_cornerFinder = require("./cornerFinder-t0r0NiIf.cjs");
+const require_extrudeFns = require("./extrudeFns-BQ9mhxB3.cjs");
 let opentype_js = require("opentype.js");
 opentype_js = __toESM(opentype_js);
 //#region src/2d/lib/stitching.ts

package/dist/{drawFns-BIFwKDPT.js → drawFns-CNPmD8PK.js}

@@ -3,17 +3,17 @@ import { A as ok, R as unwrap, T as isOk, b as err, d as validationError, h as b
 import { M as cast, N as downcast, b as getEdges, c as normalAt, l as outerWire, n as faceCenter } from "./faceFns-DMFG-piP.js";
 import { t as DEG2RAD } from "./constants-csSEYddm.js";
 import { r as toVec3 } from "./types--GD-LVc6.js";
-import { c as vecLength, d as vecNormalize, g as vecSub, h as vecScale, m as vecRotate, r as vecCross } from "./vecOps-DBmIPNhk.js";
-import { a as planeToWorld, o as resolvePlane } from "./planeOps-Da2ylKGq.js";
+import { c as vecLength, d as vecNormalize, g as vecSub, h as vecScale, m as vecRotate, r as vecCross } from "./vecOps-B-PCHgyB.js";
+import { a as planeToWorld, o as resolvePlane } from "./planeOps-sTrM3dcQ.js";
 import { m as offsetWire2D } from "./curveFns-Dn4gbNzG.js";
 import { n as getAtOrThrow, r as lastOrThrow, t as firstOrThrow } from "./arrayAccess-tCIbjLs5.js";
 import { c as makeBSplineApproximation, d as makeEllipse, p as makeHelix, r as makeFace, s as assembleWire, t as addHolesInFace, u as makeCircle } from "./surfaceBuilders-Im6Xef27.js";
-import { S as Flatbush, _ as Blueprints, b as make2dOffset, c as roundedRectangleBlueprint, f as Sketch, g as CompoundBlueprint, h as organiseBlueprints, l as BaseSketcher2d, n as fuse2D, r as intersect2D, s as polysidesBlueprint, t as cut2D, u as BlueprintSketcher, v as chamferCurves, x as intersectCurves, y as filletCurves } from "./boolean2D-_yG91bHX.js";
-import { _ as samePoint$1, b as subtract2d, c as PRECISION_OFFSET, l as add2d, y as squareDistance2d } from "./helpers-B2J4sg4l.js";
-import { _ as Curve2D, a as edgeToCurve, c as make2dCircle, d as make2dInerpolatedBSplineCurve, f as make2dSegmentCurve, g as approximateAsSvgCompatibleCurve, i as curvesAsEdgesOnPlane, l as make2dEllipse, o as make2dArcFromCenter, t as Blueprint, v as deserializeCurve2D, y as BoundingBox2d } from "./blueprint-DiLT1cjs.js";
+import { S as Flatbush, _ as Blueprints, b as make2dOffset, c as roundedRectangleBlueprint, f as Sketch, g as CompoundBlueprint, h as organiseBlueprints, l as BaseSketcher2d, n as fuse2D, r as intersect2D, s as polysidesBlueprint, t as cut2D, u as BlueprintSketcher, v as chamferCurves, x as intersectCurves, y as filletCurves } from "./boolean2D-w_JU3qA6.js";
+import { _ as samePoint$1, b as subtract2d, c as PRECISION_OFFSET, l as add2d, y as squareDistance2d } from "./helpers-CQgRNpa-.js";
+import { _ as Curve2D, a as edgeToCurve, c as make2dCircle, d as make2dInerpolatedBSplineCurve, f as make2dSegmentCurve, g as approximateAsSvgCompatibleCurve, i as curvesAsEdgesOnPlane, l as make2dEllipse, o as make2dArcFromCenter, t as Blueprint, v as deserializeCurve2D, y as BoundingBox2d } from "./blueprint-Q1M0Jh2U.js";
 import { o as makeSolid, t as makeCompound } from "./solidBuilders-CQipZFOw.js";
-import { t as cornerFinder } from "./cornerFinder-CvF2SrsV.js";
-import { i as complexExtrude, l as twistExtrude, r as revolve, t as extrude } from "./extrudeFns-DjfHvYJe.js";
+import { t as cornerFinder } from "./cornerFinder-CNpqIRvK.js";
+import { i as complexExtrude, l as twistExtrude, r as revolve, t as extrude } from "./extrudeFns-yCZ6ZNQy.js";
 import opentype from "opentype.js";
 //#region src/2d/lib/stitching.ts
 /**

package/dist/{extrudeFns-B588lxcH.cjs → extrudeFns-BQ9mhxB3.cjs}

@@ -1,6 +1,6 @@
 const require_shapeTypes = require("./shapeTypes-Bfw136X-.cjs");
 const require_errors = require("./errors-CXRNVCec.cjs");
-const require_vecOps = require("./vecOps-5bNB19nE.cjs");
+const require_vecOps = require("./vecOps-CODplJp3.cjs");
 //#region src/operations/extrudeUtils.ts
 /**
 * Build an kernel scaling law from an extrusion profile configuration.
@@ -114,7 +114,7 @@ function supportExtrude(wire, center, normal, support) {
 */
 function complexExtrude(wire, center, normal, profileShape, shellMode = false) {
 	const extrusionLength = require_vecOps.vecLength(normal);
-	if (extrusionLength === 0) return require_errors.err(require_errors.validationError("ZERO_LENGTH_EXTRUSION", "Extrusion vector cannot have zero length"));
+	if (extrusionLength < 1e-10) return require_errors.err(require_errors.validationError("ZERO_LENGTH_EXTRUSION", "Extrusion vector cannot have zero length"));
 	return sweep(wire, makeSpineWire(center, require_vecOps.vecAdd(center, normal)), { law: profileShape ? require_errors.unwrap(buildLawFromProfile(extrusionLength, profileShape)) : null }, shellMode);
 }
 /**
@@ -133,9 +133,9 @@ function complexExtrude(wire, center, normal, profileShape, shellMode = false) {
 * @returns `Result` containing the twisted extruded shape or a shell tuple.
 */
 function twistExtrude(wire, angleDegrees, center, normal, profileShape, shellMode = false) {
-	if (angleDegrees === 0) return require_errors.err(require_errors.validationError("ZERO_TWIST_ANGLE", "Twist angle cannot be zero"));
+	if (Math.abs(angleDegrees) < 1e-10) return require_errors.err(require_errors.validationError("ZERO_TWIST_ANGLE", "Twist angle cannot be zero"));
 	const extrusionLength = require_vecOps.vecLength(normal);
-	if (extrusionLength === 0) return require_errors.err(require_errors.validationError("ZERO_LENGTH_EXTRUSION", "Extrusion vector cannot have zero length"));
+	if (extrusionLength < 1e-10) return require_errors.err(require_errors.validationError("ZERO_LENGTH_EXTRUSION", "Extrusion vector cannot have zero length"));
 	return sweep(wire, makeSpineWire(center, require_vecOps.vecAdd(center, normal)), {
 		auxiliarySpine: makeHelixWire(360 / angleDegrees * extrusionLength, extrusionLength, 1, center, normal),
 		law: profileShape ? require_errors.unwrap(buildLawFromProfile(extrusionLength, profileShape)) : null

package/dist/{extrudeFns-DjfHvYJe.js → extrudeFns-yCZ6ZNQy.js}

@@ -1,6 +1,6 @@
 import { X as getKernel, c as createSolid, h as isShape3D, t as castShape, y as isWire } from "./shapeTypes-Ct7W6h2X.js";
 import { A as ok, R as unwrap, b as err, d as validationError, i as kernelError, l as typeCastError, t as BrepErrorCode } from "./errors-DboJwVCf.js";
-import { c as vecLength, d as vecNormalize, t as vecAdd } from "./vecOps-DBmIPNhk.js";
+import { c as vecLength, d as vecNormalize, t as vecAdd } from "./vecOps-B-PCHgyB.js";
 //#region src/operations/extrudeUtils.ts
 /**
 * Build an kernel scaling law from an extrusion profile configuration.
@@ -114,7 +114,7 @@ function supportExtrude(wire, center, normal, support) {
 */
 function complexExtrude(wire, center, normal, profileShape, shellMode = false) {
 	const extrusionLength = vecLength(normal);
-	if (extrusionLength === 0) return err(validationError("ZERO_LENGTH_EXTRUSION", "Extrusion vector cannot have zero length"));
+	if (extrusionLength < 1e-10) return err(validationError("ZERO_LENGTH_EXTRUSION", "Extrusion vector cannot have zero length"));
 	return sweep(wire, makeSpineWire(center, vecAdd(center, normal)), { law: profileShape ? unwrap(buildLawFromProfile(extrusionLength, profileShape)) : null }, shellMode);
 }
 /**
@@ -133,9 +133,9 @@ function complexExtrude(wire, center, normal, profileShape, shellMode = false) {
 * @returns `Result` containing the twisted extruded shape or a shell tuple.
 */
 function twistExtrude(wire, angleDegrees, center, normal, profileShape, shellMode = false) {
-	if (angleDegrees === 0) return err(validationError("ZERO_TWIST_ANGLE", "Twist angle cannot be zero"));
+	if (Math.abs(angleDegrees) < 1e-10) return err(validationError("ZERO_TWIST_ANGLE", "Twist angle cannot be zero"));
 	const extrusionLength = vecLength(normal);
-	if (extrusionLength === 0) return err(validationError("ZERO_LENGTH_EXTRUSION", "Extrusion vector cannot have zero length"));
+	if (extrusionLength < 1e-10) return err(validationError("ZERO_LENGTH_EXTRUSION", "Extrusion vector cannot have zero length"));
 	return sweep(wire, makeSpineWire(center, vecAdd(center, normal)), {
 		auxiliarySpine: makeHelixWire(360 / angleDegrees * extrusionLength, extrusionLength, 1, center, normal),
 		law: profileShape ? unwrap(buildLawFromProfile(extrusionLength, profileShape)) : null

package/dist/{helpers-B2J4sg4l.js → helpers-CQgRNpa-.js}

@@ -2,7 +2,7 @@ import { X as getKernel, p as isFace } from "./shapeTypes-Ct7W6h2X.js";
 import { A as ok, R as unwrap, T as isOk, b as err, h as bug, o as queryError } from "./errors-DboJwVCf.js";
 import { C as getVertices, b as getEdges, c as normalAt, o as getSurfaceType, w as getWires, x as getFaces } from "./faceFns-DMFG-piP.js";
 import { t as DEG2RAD } from "./constants-csSEYddm.js";
-import { a as vecDot, d as vecNormalize } from "./vecOps-DBmIPNhk.js";
+import { a as vecDot, d as vecNormalize } from "./vecOps-B-PCHgyB.js";
 import { a as isSameShape, n as getHashCode } from "./shapeFns-QGgHStIU.js";
 import { a as curveLength, d as getCurveType, r as curveIsClosed } from "./curveFns-Dn4gbNzG.js";
 import { n as measureArea } from "./measureFns-Zc5RWsI4.js";

package/dist/{helpers-B48K8Z6B.cjs → helpers-Csx69_Wn.cjs}

@@ -2,7 +2,7 @@ const require_shapeTypes = require("./shapeTypes-Bfw136X-.cjs");
 const require_errors = require("./errors-CXRNVCec.cjs");
 const require_faceFns = require("./faceFns-CKL9Us23.cjs");
 const require_constants = require("./constants-BNP_xnBN.cjs");
-const require_vecOps = require("./vecOps-5bNB19nE.cjs");
+const require_vecOps = require("./vecOps-CODplJp3.cjs");
 const require_shapeFns = require("./shapeFns-DkFzoJav.cjs");
 const require_curveFns = require("./curveFns-Bukd9jhv.cjs");
 const require_measureFns = require("./measureFns-C2SnZLhD.cjs");

package/dist/{historyFns-Bxg4_ieD.cjs → historyFns-DBSgZGtF.cjs}

@@ -1,9 +1,9 @@
 const require_shapeTypes = require("./shapeTypes-Bfw136X-.cjs");
 const require_errors = require("./errors-CXRNVCec.cjs");
 const require_faceFns = require("./faceFns-CKL9Us23.cjs");
-const require_vecOps = require("./vecOps-5bNB19nE.cjs");
+const require_vecOps = require("./vecOps-CODplJp3.cjs");
 const require_shapeFns = require("./shapeFns-DkFzoJav.cjs");
-const require_booleanFns = require("./booleanFns-C7c98iPH.cjs");
+const require_booleanFns = require("./booleanFns-CQNV8MMq.cjs");
 //#region src/utils/uuid.ts
 /** Generate a v4-style UUID string using `crypto.getRandomValues`. */
 function uuidv() {

package/dist/{historyFns-BpfArwQu.js → historyFns-DltXL-vp.js}

@@ -1,9 +1,9 @@
 import { B as createKernelHandle, X as getKernel, t as castShape } from "./shapeTypes-Ct7W6h2X.js";
 import { A as ok, b as err, d as validationError, n as computationError, r as ioError } from "./errors-DboJwVCf.js";
 import { P as fromBREP } from "./faceFns-DMFG-piP.js";
-import { d as vecNormalize, s as vecIsZero } from "./vecOps-DBmIPNhk.js";
+import { d as vecNormalize, s as vecIsZero } from "./vecOps-B-PCHgyB.js";
 import { s as toBREP } from "./shapeFns-QGgHStIU.js";
-import { a as fuseAll } from "./booleanFns-QZtMt5Aa.js";
+import { a as fuseAll } from "./booleanFns-D_DVbfzR.js";
 //#region src/utils/uuid.ts
 /** Generate a v4-style UUID string using `crypto.getRandomValues`. */
 function uuidv() {

package/dist/{importFns-D6eumXiz.js → importFns-CcTs485L.js}

@@ -1,7 +1,7 @@
 import { X as getKernel, t as castShape } from "./shapeTypes-Ct7W6h2X.js";
 import { A as ok, b as err, r as ioError, t as BrepErrorCode } from "./errors-DboJwVCf.js";
 import { n as getAtOrThrow } from "./arrayAccess-tCIbjLs5.js";
-import { f as make2dSegmentCurve, m as make2dThreePointArc, s as make2dBezierCurve, t as Blueprint } from "./blueprint-DiLT1cjs.js";
+import { f as make2dSegmentCurve, m as make2dThreePointArc, s as make2dBezierCurve, t as Blueprint } from "./blueprint-Q1M0Jh2U.js";
 //#region src/io/objExportFns.ts
 /** Read a vec3 from a typed array at the given vertex index. */
 function vec3At(arr, i) {
@@ -1047,7 +1047,7 @@ function handleArc(args, cursor, isRelative, curves) {
 	}
 }
 function handleClosePath(cursor, curves) {
-	if (cursor.cx !== cursor.sx || cursor.cy !== cursor.sy) curves.push(make2dSegmentCurve(flipY([cursor.cx, cursor.cy]), flipY([cursor.sx, cursor.sy])));
+	if (Math.abs(cursor.cx - cursor.sx) > 1e-10 || Math.abs(cursor.cy - cursor.sy) > 1e-10) curves.push(make2dSegmentCurve(flipY([cursor.cx, cursor.cy]), flipY([cursor.sx, cursor.sy])));
 	cursor.cx = cursor.sx;
 	cursor.cy = cursor.sy;
 }

package/dist/{importFns-UkXALkBs.cjs → importFns-m2IJXUsB.cjs}

@@ -1,7 +1,7 @@
 const require_shapeTypes = require("./shapeTypes-Bfw136X-.cjs");
 const require_errors = require("./errors-CXRNVCec.cjs");
 const require_arrayAccess = require("./arrayAccess-DsnQpdSD.cjs");
-const require_blueprint = require("./blueprint-CVDdCwvY.cjs");
+const require_blueprint = require("./blueprint-DP00ES4B.cjs");
 //#region src/io/objExportFns.ts
 /** Read a vec3 from a typed array at the given vertex index. */
 function vec3At(arr, i) {
@@ -1047,7 +1047,7 @@ function handleArc(args, cursor, isRelative, curves) {
 	}
 }
 function handleClosePath(cursor, curves) {
-	if (cursor.cx !== cursor.sx || cursor.cy !== cursor.sy) curves.push(require_blueprint.make2dSegmentCurve(flipY([cursor.cx, cursor.cy]), flipY([cursor.sx, cursor.sy])));
+	if (Math.abs(cursor.cx - cursor.sx) > 1e-10 || Math.abs(cursor.cy - cursor.sy) > 1e-10) curves.push(require_blueprint.make2dSegmentCurve(flipY([cursor.cx, cursor.cy]), flipY([cursor.sx, cursor.sy])));
 	cursor.cx = cursor.sx;
 	cursor.cy = cursor.sy;
 }

package/dist/io.cjs

@@ -1,6 +1,6 @@
 Object.defineProperty(exports, Symbol.toStringTag, { value: "Module" });
 const require_meshFns = require("./meshFns-CO9qVJ24.cjs");
-const require_importFns = require("./importFns-UkXALkBs.cjs");
+const require_importFns = require("./importFns-m2IJXUsB.cjs");
 exports.blueprintToDXF = require_importFns.blueprintToDXF;
 exports.exportDXF = require_importFns.exportDXF;
 exports.exportGlb = require_importFns.exportGlb;

package/dist/io.js

@@ -1,3 +1,3 @@
 import { n as exportSTEP, r as exportSTL, t as exportIGES } from "./meshFns-gTPomZkK.js";
-import { a as importSVG, c as blueprintToDXF, d as exportGltf, f as exportOBJ, i as exportSTEPConfigured, l as exportDXF, n as importSTEP, o as importSVGPathD, r as importSTL, s as exportThreeMF, t as importIGES, u as exportGlb } from "./importFns-D6eumXiz.js";
+import { a as importSVG, c as blueprintToDXF, d as exportGltf, f as exportOBJ, i as exportSTEPConfigured, l as exportDXF, n as importSTEP, o as importSVGPathD, r as importSTL, s as exportThreeMF, t as importIGES, u as exportGlb } from "./importFns-CcTs485L.js";
 export { blueprintToDXF, exportDXF, exportGlb, exportGltf, exportIGES, exportOBJ, exportSTEP, exportSTEPConfigured, exportSTL, exportThreeMF, importIGES, importSTEP, importSTL, importSVG, importSVGPathD };

package/dist/operations/roofFns.d.ts.map

@@ -1 +1 @@
-{"version":3,"file":"roofFns.d.ts","sourceRoot":"","sources":["../../src/operations/roofFns.ts"],"names":[],"mappings":"AAAA;;;;;;;GAOG;AAIH,OAAO,KAAK,EAAE,UAAU,EAAE,SAAS,EAAQ,MAAM,sBAAsB,CAAC;AAExE,OAAO,KAAK,EAAE,UAAU,EAAE,UAAU,EAAE,MAAM,yBAAyB,CAAC;AAEtE,OAAO,EAAE,KAAK,MAAM,EAAW,MAAM,kBAAkB,CAAC;AAWxD,MAAM,WAAW,WAAW;IAC1B,iDAAiD;IACjD,QAAQ,CAAC,KAAK,CAAC,EAAE,MAAM,CAAC;CACzB;AAgLD;;;;;;;GAOG;AACH,wBAAgB,IAAI,CAClB,CAAC,EAAE,UAAU,CAAC,SAAS,CAAC,GAAG,UAAU,CAAC,SAAS,CAAC,EAChD,OAAO,CAAC,EAAE,WAAW,GACpB,MAAM,CAAC,UAAU,CAAC,CAmEpB"}
+{"version":3,"file":"roofFns.d.ts","sourceRoot":"","sources":["../../src/operations/roofFns.ts"],"names":[],"mappings":"AAAA;;;;;;;GAOG;AAIH,OAAO,KAAK,EAAE,UAAU,EAAE,SAAS,EAAQ,MAAM,sBAAsB,CAAC;AAGxE,OAAO,KAAK,EAAE,UAAU,EAAE,UAAU,EAAE,MAAM,yBAAyB,CAAC;AAEtE,OAAO,EAAE,KAAK,MAAM,EAAW,MAAM,kBAAkB,CAAC;AAWxD,MAAM,WAAW,WAAW;IAC1B,iDAAiD;IACjD,QAAQ,CAAC,KAAK,CAAC,EAAE,MAAM,CAAC;CACzB;AAgLD;;;;;;;GAOG;AACH,wBAAgB,IAAI,CAClB,CAAC,EAAE,UAAU,CAAC,SAAS,CAAC,GAAG,UAAU,CAAC,SAAS,CAAC,EAChD,OAAO,CAAC,EAAE,WAAW,GACpB,MAAM,CAAC,UAAU,CAAC,CAmEpB"}

package/dist/operations.cjs

@@ -1,6 +1,6 @@
 Object.defineProperty(exports, Symbol.toStringTag, { value: "Module" });
-const require_historyFns = require("./historyFns-Bxg4_ieD.cjs");
-const require_extrudeFns = require("./extrudeFns-B588lxcH.cjs");
+const require_historyFns = require("./historyFns-DBSgZGtF.cjs");
+const require_extrudeFns = require("./extrudeFns-BQ9mhxB3.cjs");
 exports.addChild = require_historyFns.addChild;
 exports.addStep = require_historyFns.addStep;
 exports.circularPattern = require_historyFns.circularPattern;

package/dist/operations.js

@@ -1,3 +1,3 @@
-import { C as walkAssembly, D as exportAssemblySTEP, E as linearPattern, O as createAssembly, S as updateNode, T as gridPattern, _ as collectShapes, a as findStep, b as findNode, c as registerOperation, d as replayHistory, g as addChild, h as undoLast, l as registerShape, m as stepsFrom, n as createHistory, o as getShape, p as stepCount, r as createRegistry, s as modifyStep, t as addStep, u as replayFrom, v as countNodes, w as circularPattern, x as removeChild, y as createAssemblyNode } from "./historyFns-BpfArwQu.js";
-import { c as sweep, i as complexExtrude, l as twistExtrude, s as supportExtrude } from "./extrudeFns-DjfHvYJe.js";
+import { C as walkAssembly, D as exportAssemblySTEP, E as linearPattern, O as createAssembly, S as updateNode, T as gridPattern, _ as collectShapes, a as findStep, b as findNode, c as registerOperation, d as replayHistory, g as addChild, h as undoLast, l as registerShape, m as stepsFrom, n as createHistory, o as getShape, p as stepCount, r as createRegistry, s as modifyStep, t as addStep, u as replayFrom, v as countNodes, w as circularPattern, x as removeChild, y as createAssemblyNode } from "./historyFns-DltXL-vp.js";
+import { c as sweep, i as complexExtrude, l as twistExtrude, s as supportExtrude } from "./extrudeFns-yCZ6ZNQy.js";
 export { addChild, addStep, circularPattern, collectShapes, complexExtrude, countNodes, createAssembly, createAssemblyNode, createHistory, createRegistry, exportAssemblySTEP, findNode, findStep, getShape as getHistoryShape, gridPattern, linearPattern, modifyStep, registerOperation, registerShape, removeChild, replayFrom, replayHistory, stepCount, stepsFrom, supportExtrude, sweep, twistExtrude, undoLast, updateNode, walkAssembly };

package/dist/{planeOps-CuI-sDtn.cjs → planeOps-BJOIbn4K.cjs}

@@ -1,7 +1,7 @@
 const require_errors = require("./errors-CXRNVCec.cjs");
 const require_constants = require("./constants-BNP_xnBN.cjs");
 const require_types = require("./types-gLi9wL0N.cjs");
-const require_vecOps = require("./vecOps-5bNB19nE.cjs");
+const require_vecOps = require("./vecOps-CODplJp3.cjs");
 //#region src/core/planeOps.ts
 /**
 * Create a {@link Plane} from an origin, optional X direction, and a normal.

package/dist/{planeOps-Da2ylKGq.js → planeOps-sTrM3dcQ.js}

@@ -1,7 +1,7 @@
 import { A as ok, R as unwrap, b as err, d as validationError } from "./errors-DboJwVCf.js";
 import { t as DEG2RAD } from "./constants-csSEYddm.js";
 import { r as toVec3 } from "./types--GD-LVc6.js";
-import { d as vecNormalize, h as vecScale, m as vecRotate, r as vecCross, s as vecIsZero, t as vecAdd } from "./vecOps-DBmIPNhk.js";
+import { d as vecNormalize, h as vecScale, m as vecRotate, r as vecCross, s as vecIsZero, t as vecAdd } from "./vecOps-B-PCHgyB.js";
 //#region src/core/planeOps.ts
 /**
 * Create a {@link Plane} from an origin, optional X direction, and a normal.

package/dist/{primitiveFns-CriBoS7M.cjs → primitiveFns-CVcoZURM.cjs}

@@ -857,7 +857,7 @@ function shell(shape, faces, thickness, tolerance = .001, { trackEvolution = tru
 function offset(shape, distance, tolerance = 1e-6) {
 	const check = validateNotNull(shape, "offset: shape");
 	if (require_errors.isErr(check)) return check;
-	if (distance === 0) return require_errors.err(require_errors.validationError("ZERO_OFFSET", "Offset distance cannot be zero"));
+	if (Math.abs(distance) < 1e-10) return require_errors.err(require_errors.validationError("ZERO_OFFSET", "Offset distance cannot be zero"));
 	try {
 		const inputFaceHashes = require_shapeFns.collectInputFaceHashes([shape]);
 		const { shape: resultShape, evolution } = require_shapeTypes.getKernel().offsetWithHistory(shape.wrapped, distance, inputFaceHashes, require_constants.HASH_CODE_MAX, tolerance);
@@ -886,7 +886,7 @@ function draft(shape, faces, pullDirection, neutralPlane, angle) {
 	const check = validateNotNull(shape, "draft: shape");
 	if (require_errors.isErr(check)) return check;
 	if (typeof angle === "number") {
-		if (angle === 0) return require_errors.err(require_errors.validationError(require_errors.BrepErrorCode.DRAFT_INVALID_ANGLE, "Draft angle cannot be zero", void 0, void 0, "Provide a non-zero angle in degrees"));
+		if (Math.abs(angle) < 1e-10) return require_errors.err(require_errors.validationError(require_errors.BrepErrorCode.DRAFT_INVALID_ANGLE, "Draft angle cannot be zero", void 0, void 0, "Provide a non-zero angle in degrees"));
 		if (Math.abs(angle) >= 90) return require_errors.err(require_errors.validationError(require_errors.BrepErrorCode.DRAFT_INVALID_ANGLE, "Draft angle must be between -90 and 90 degrees (exclusive)", void 0, void 0, "Typical draft angles are 1-5 degrees for injection molding"));
 	}
 	if (faces.length === 0) return require_errors.err(require_errors.validationError(require_errors.BrepErrorCode.DRAFT_NO_FACES, "No faces specified for draft", void 0, void 0, "Select at least one face to apply the draft angle to"));

package/dist/{primitiveFns-CtWBTFPI.js → primitiveFns-DZBVfdNl.js}

@@ -857,7 +857,7 @@ function shell(shape, faces, thickness, tolerance = .001, { trackEvolution = tru
 function offset(shape, distance, tolerance = 1e-6) {
 	const check = validateNotNull(shape, "offset: shape");
 	if (isErr(check)) return check;
-	if (distance === 0) return err(validationError("ZERO_OFFSET", "Offset distance cannot be zero"));
+	if (Math.abs(distance) < 1e-10) return err(validationError("ZERO_OFFSET", "Offset distance cannot be zero"));
 	try {
 		const inputFaceHashes = collectInputFaceHashes([shape]);
 		const { shape: resultShape, evolution } = getKernel().offsetWithHistory(shape.wrapped, distance, inputFaceHashes, HASH_CODE_MAX, tolerance);
@@ -886,7 +886,7 @@ function draft(shape, faces, pullDirection, neutralPlane, angle) {
 	const check = validateNotNull(shape, "draft: shape");
 	if (isErr(check)) return check;
 	if (typeof angle === "number") {
-		if (angle === 0) return err(validationError(BrepErrorCode.DRAFT_INVALID_ANGLE, "Draft angle cannot be zero", void 0, void 0, "Provide a non-zero angle in degrees"));
+		if (Math.abs(angle) < 1e-10) return err(validationError(BrepErrorCode.DRAFT_INVALID_ANGLE, "Draft angle cannot be zero", void 0, void 0, "Provide a non-zero angle in degrees"));
 		if (Math.abs(angle) >= 90) return err(validationError(BrepErrorCode.DRAFT_INVALID_ANGLE, "Draft angle must be between -90 and 90 degrees (exclusive)", void 0, void 0, "Typical draft angles are 1-5 degrees for injection molding"));
 	}
 	if (faces.length === 0) return err(validationError(BrepErrorCode.DRAFT_NO_FACES, "No faces specified for draft", void 0, void 0, "Select at least one face to apply the draft angle to"));

package/dist/query.cjs

@@ -1,6 +1,6 @@
 Object.defineProperty(exports, Symbol.toStringTag, { value: "Module" });
-const require_helpers = require("./helpers-B48K8Z6B.cjs");
-const require_cornerFinder = require("./cornerFinder-DP1-TfDV.cjs");
+const require_helpers = require("./helpers-Csx69_Wn.cjs");
+const require_cornerFinder = require("./cornerFinder-t0r0NiIf.cjs");
 exports.cornerFinder = require_cornerFinder.cornerFinder;
 exports.edgeFinder = require_helpers.edgeFinder;
 exports.faceFinder = require_helpers.faceFinder;

package/dist/query.js

@@ -1,3 +1,3 @@
-import { n as edgeFinder, r as faceFinder, t as getSingleFace } from "./helpers-B2J4sg4l.js";
-import { t as cornerFinder } from "./cornerFinder-CvF2SrsV.js";
+import { n as edgeFinder, r as faceFinder, t as getSingleFace } from "./helpers-CQgRNpa-.js";
+import { t as cornerFinder } from "./cornerFinder-CNpqIRvK.js";
 export { cornerFinder, edgeFinder, faceFinder, getSingleFace };

package/dist/sketching.cjs

@@ -1,6 +1,6 @@
 Object.defineProperty(exports, Symbol.toStringTag, { value: "Module" });
-const require_drawFns = require("./drawFns-mX41AgJp.cjs");
-const require_boolean2D = require("./boolean2D-C_vue9r7.cjs");
+const require_drawFns = require("./drawFns-Bk7kfVmD.cjs");
+const require_boolean2D = require("./boolean2D-BuF_1i4D.cjs");
 //#region src/sketching.ts
 /**
 * brepjs/sketching — Sketcher, Drawing, and sketch-to-shape operations.

package/dist/sketching.js

@@ -1,5 +1,5 @@
-import { d as FaceSketcher, f as Sketch, l as BaseSketcher2d, u as BlueprintSketcher } from "./boolean2D-_yG91bHX.js";
-import { $ as sketchFaceOffset, A as DrawingPen, B as drawSingleCircle, F as drawParametricFunction, H as drawText, I as drawPointsInterpolation, L as drawPolysides, M as draw, N as drawCircle, P as drawEllipse, Q as sketchEllipse, R as drawRectangle, S as drawProjection, V as drawSingleEllipse, X as polysideInnerRadius, Y as makeBaseBox, Z as sketchCircle, _ as sketchLoft, a as drawingIntersect, at as Sketcher, b as sketchWires, c as rotateDrawing, d as compoundSketchExtrude, et as sketchHelix, f as compoundSketchFace, g as sketchFace, h as sketchExtrude, i as drawingFuse, it as sketchRoundedRectangle, j as deserializeDrawing, k as Drawing, l as scaleDrawing, m as compoundSketchRevolve, n as drawingCut, nt as sketchPolysides, o as drawingToSketchOnPlane, ot as Sketches, p as compoundSketchLoft, r as drawingFillet, rt as sketchRectangle, s as mirrorDrawing, st as CompoundSketch, t as drawingChamfer, tt as sketchParametricFunction, u as translateDrawing, v as sketchRevolve, x as drawFaceOutline, y as sketchSweep, z as drawRoundedRectangle } from "./drawFns-BIFwKDPT.js";
+import { d as FaceSketcher, f as Sketch, l as BaseSketcher2d, u as BlueprintSketcher } from "./boolean2D-w_JU3qA6.js";
+import { $ as sketchFaceOffset, A as DrawingPen, B as drawSingleCircle, F as drawParametricFunction, H as drawText, I as drawPointsInterpolation, L as drawPolysides, M as draw, N as drawCircle, P as drawEllipse, Q as sketchEllipse, R as drawRectangle, S as drawProjection, V as drawSingleEllipse, X as polysideInnerRadius, Y as makeBaseBox, Z as sketchCircle, _ as sketchLoft, a as drawingIntersect, at as Sketcher, b as sketchWires, c as rotateDrawing, d as compoundSketchExtrude, et as sketchHelix, f as compoundSketchFace, g as sketchFace, h as sketchExtrude, i as drawingFuse, it as sketchRoundedRectangle, j as deserializeDrawing, k as Drawing, l as scaleDrawing, m as compoundSketchRevolve, n as drawingCut, nt as sketchPolysides, o as drawingToSketchOnPlane, ot as Sketches, p as compoundSketchLoft, r as drawingFillet, rt as sketchRectangle, s as mirrorDrawing, st as CompoundSketch, t as drawingChamfer, tt as sketchParametricFunction, u as translateDrawing, v as sketchRevolve, x as drawFaceOutline, y as sketchSweep, z as drawRoundedRectangle } from "./drawFns-CNPmD8PK.js";
 //#region src/sketching.ts
 /**
 * brepjs/sketching — Sketcher, Drawing, and sketch-to-shape operations.

package/dist/topology.cjs

@@ -3,8 +3,8 @@ const require_faceFns = require("./faceFns-CKL9Us23.cjs");
 const require_shapeFns = require("./shapeFns-DkFzoJav.cjs");
 const require_curveFns = require("./curveFns-Bukd9jhv.cjs");
 const require_meshFns = require("./meshFns-CO9qVJ24.cjs");
-const require_booleanFns = require("./booleanFns-C7c98iPH.cjs");
-const require_primitiveFns = require("./primitiveFns-CriBoS7M.cjs");
+const require_booleanFns = require("./booleanFns-CQNV8MMq.cjs");
+const require_primitiveFns = require("./primitiveFns-CVcoZURM.cjs");
 exports.addHoles = require_primitiveFns.addHoles;
 exports.adjacentFaces = require_primitiveFns.adjacentFaces;
 exports.approximateCurve = require_curveFns.approximateCurve;

package/dist/topology.js

@@ -2,6 +2,6 @@ import { A as vertexPosition, C as getVertices, D as iterFaces, E as iterEdges,
 import { a as isSameShape, i as isEqualShape, n as getHashCode } from "./shapeFns-QGgHStIU.js";
 import { a as curveLength, c as curveStartPoint, d as getCurveType, f as getOrientation, i as curveIsPeriodic, l as curveTangentAt, m as offsetWire2D, n as curveEndPoint, o as curvePeriod, p as interpolateCurve, r as curveIsClosed, s as curvePointAt, t as approximateCurve, u as flipOrientation } from "./curveFns-Dn4gbNzG.js";
 import { c as createMeshCache, n as exportSTEP, r as exportSTL, s as clearMeshCache, t as exportIGES } from "./meshFns-gTPomZkK.js";
-import { a as fuseAll, r as cutAll } from "./booleanFns-QZtMt5Aa.js";
-import { $ as getNurbsSurfaceData, A as fixShape, C as threePointArc, D as wireLoop, E as wire, G as chamferWithEvolution, I as solidFromShell, J as fuseWithEvolution, K as cutWithEvolution, M as healFace, N as healSolid, O as autoHeal, P as healWire, Q as getNurbsCurveData, S as tangentArc, T as vertex, U as variableFillet, W as positionOnCurve, X as shellWithEvolution, Y as intersectWithEvolution, Z as checkBoolean, _ as polygon, a as circle, at as wiresOfFace, b as sphere, c as cylinder, ct as toGroupedBufferGeometryData, d as ellipsoid, et as adjacentFaces, f as face, g as offsetFace, h as line, i as bsplineApprox, it as verticesOfEdge, k as fixSelfIntersection, l as ellipse, m as helix, n as bezier, nt as facesOfEdge, o as compound, ot as chamferDistAngle, p as filledFace, q as filletWithEvolution, r as box, rt as sharedEdges, s as cone, st as toBufferGeometryData, t as addHoles, tt as edgesOfFace, u as ellipseArc, ut as toLineGeometryData, v as sewShells, w as torus, x as subFace, y as solid } from "./primitiveFns-CtWBTFPI.js";
+import { a as fuseAll, r as cutAll } from "./booleanFns-D_DVbfzR.js";
+import { $ as getNurbsSurfaceData, A as fixShape, C as threePointArc, D as wireLoop, E as wire, G as chamferWithEvolution, I as solidFromShell, J as fuseWithEvolution, K as cutWithEvolution, M as healFace, N as healSolid, O as autoHeal, P as healWire, Q as getNurbsCurveData, S as tangentArc, T as vertex, U as variableFillet, W as positionOnCurve, X as shellWithEvolution, Y as intersectWithEvolution, Z as checkBoolean, _ as polygon, a as circle, at as wiresOfFace, b as sphere, c as cylinder, ct as toGroupedBufferGeometryData, d as ellipsoid, et as adjacentFaces, f as face, g as offsetFace, h as line, i as bsplineApprox, it as verticesOfEdge, k as fixSelfIntersection, l as ellipse, m as helix, n as bezier, nt as facesOfEdge, o as compound, ot as chamferDistAngle, p as filledFace, q as filletWithEvolution, r as box, rt as sharedEdges, s as cone, st as toBufferGeometryData, t as addHoles, tt as edgesOfFace, u as ellipseArc, ut as toLineGeometryData, v as sewShells, w as torus, x as subFace, y as solid } from "./primitiveFns-DZBVfdNl.js";
 export { addHoles, adjacentFaces, approximateCurve, asTopo, autoHeal, bezier, box, bsplineApprox, cast, chamferDistAngle as chamferDistAngleShape, chamferWithEvolution, checkBoolean, circle, classifyPointOnFace, clearMeshCache, compound, cone, createMeshCache, curveEndPoint, curveIsClosed, curveIsPeriodic, curveLength, curvePeriod, curvePointAt, curveStartPoint, curveTangentAt, cutAll, cutWithEvolution, cylinder, fromBREP as deserializeShape, downcast, edgesOfFace, ellipse, ellipseArc, ellipsoid, exportIGES, exportSTEP, exportSTL, face, faceCenter, faceGeomType, faceOrientation, facesOfEdge, filledFace, filletWithEvolution, fixSelfIntersection, fixShape, flipFaceOrientation, flipOrientation, fuseAll, fuseWithEvolution, getBounds, getCurveType, getEdges, getFaces, getHashCode, getNurbsCurveData, getNurbsSurfaceData, getOrientation, getSurfaceType, getVertices, getWires, healFace, healSolid, healWire, helix, innerWires, interpolateCurve, intersectWithEvolution, invalidateShapeCache, isCompSolid, isEqualShape, isSameShape, iterEdges, iterFaces, iterTopo, iterVertices, iterWires, line, normalAt, offsetFace, offsetWire2D, outerWire, pointOnSurface, polygon, positionOnCurve, projectPointOnFace, sewShells, shapeType, sharedEdges, shellWithEvolution, solid, solidFromShell, sphere, subFace, tangentArc, threePointArc, toBufferGeometryData, toGroupedBufferGeometryData, toLineGeometryData, torus, uvBounds, uvCoordinates, variableFillet, vertex, vertexPosition, verticesOfEdge, wire, wireLoop, wiresOfFace };

package/dist/{vecOps-DBmIPNhk.js → vecOps-B-PCHgyB.js}

@@ -96,7 +96,7 @@ function vecAngle(a, b) {
 	const dot = vecDot(a, b);
 	const lenA = vecLength(a);
 	const lenB = vecLength(b);
-	if (lenA === 0 || lenB === 0) return 0;
+	if (lenA < 1e-10 || lenB < 1e-10) return 0;
 	const cosAngle = Math.max(-1, Math.min(1, dot / (lenA * lenB)));
 	return Math.acos(cosAngle);
 }
@@ -104,7 +104,7 @@ function vecAngle(a, b) {
 function vecProjectToPlane(v, planeOrigin, planeNormal) {
 	const relative = vecSub(v, planeOrigin);
 	const normalLen = vecLengthSq(planeNormal);
-	if (normalLen === 0) return v;
+	if (normalLen < 1e-20) return v;
 	return vecSub(v, vecScale(planeNormal, vecDot(relative, planeNormal) / normalLen));
 }
 /** Rotate vector around an axis by angle (radians) */

package/dist/{vecOps-5bNB19nE.cjs → vecOps-CODplJp3.cjs}

@@ -96,7 +96,7 @@ function vecAngle(a, b) {
 	const dot = vecDot(a, b);
 	const lenA = vecLength(a);
 	const lenB = vecLength(b);
-	if (lenA === 0 || lenB === 0) return 0;
+	if (lenA < 1e-10 || lenB < 1e-10) return 0;
 	const cosAngle = Math.max(-1, Math.min(1, dot / (lenA * lenB)));
 	return Math.acos(cosAngle);
 }
@@ -104,7 +104,7 @@ function vecAngle(a, b) {
 function vecProjectToPlane(v, planeOrigin, planeNormal) {
 	const relative = vecSub(v, planeOrigin);
 	const normalLen = vecLengthSq(planeNormal);
-	if (normalLen === 0) return v;
+	if (normalLen < 1e-20) return v;
 	return vecSub(v, vecScale(planeNormal, vecDot(relative, planeNormal) / normalLen));
 }
 /** Rotate vector around an axis by angle (radians) */

package/dist/vectors.cjs

@@ -1,8 +1,8 @@
 Object.defineProperty(exports, Symbol.toStringTag, { value: "Module" });
 const require_constants = require("./constants-BNP_xnBN.cjs");
 const require_types = require("./types-gLi9wL0N.cjs");
-const require_vecOps = require("./vecOps-5bNB19nE.cjs");
-const require_planeOps = require("./planeOps-CuI-sDtn.cjs");
+const require_vecOps = require("./vecOps-CODplJp3.cjs");
+const require_planeOps = require("./planeOps-BJOIbn4K.cjs");
 exports.DEG2RAD = require_constants.DEG2RAD;
 exports.RAD2DEG = require_constants.RAD2DEG;
 exports.createNamedPlane = require_planeOps.createNamedPlane;

package/dist/vectors.js

@@ -1,5 +1,5 @@
 import { r as RAD2DEG, t as DEG2RAD } from "./constants-csSEYddm.js";
 import { n as toVec2, r as toVec3, t as resolveDirection } from "./types--GD-LVc6.js";
-import { a as vecDot, c as vecLength, d as vecNormalize, f as vecProjectToPlane, g as vecSub, h as vecScale, i as vecDistance, l as vecLengthSq, m as vecRotate, n as vecAngle, o as vecEquals, p as vecRepr, r as vecCross, s as vecIsZero, t as vecAdd, u as vecNegate } from "./vecOps-DBmIPNhk.js";
-import { i as pivotPlane, n as createPlane, o as resolvePlane, s as translatePlane, t as createNamedPlane } from "./planeOps-Da2ylKGq.js";
+import { a as vecDot, c as vecLength, d as vecNormalize, f as vecProjectToPlane, g as vecSub, h as vecScale, i as vecDistance, l as vecLengthSq, m as vecRotate, n as vecAngle, o as vecEquals, p as vecRepr, r as vecCross, s as vecIsZero, t as vecAdd, u as vecNegate } from "./vecOps-B-PCHgyB.js";
+import { i as pivotPlane, n as createPlane, o as resolvePlane, s as translatePlane, t as createNamedPlane } from "./planeOps-sTrM3dcQ.js";
 export { DEG2RAD, RAD2DEG, createNamedPlane, createPlane, pivotPlane, resolveDirection, resolvePlane, toVec2, toVec3, translatePlane, vecAdd, vecAngle, vecCross, vecDistance, vecDot, vecEquals, vecIsZero, vecLength, vecLengthSq, vecNegate, vecNormalize, vecProjectToPlane, vecRepr, vecRotate, vecScale, vecSub };

package/package.json

@@ -1,6 +1,6 @@
 {
   "name": "brepjs",
-  "version": "15.2.4",
+  "version": "15.2.6",
   "description": "Web CAD library with pluggable geometry kernel",
   "keywords": [
     "cad",
@@ -219,19 +219,19 @@
     "@types/opentype.js": "1.3.9",
     "@vitest/coverage-v8": "4.1.2",
     "brepjs-opencascade": "*",
-    "brepkit-wasm": "2.43.3",
-    "eslint": "10.1.0",
+    "brepkit-wasm": "2.43.6",
+    "eslint": "10.2.0",
     "fast-check": "4.6.0",
     "husky": "9.1.7",
-    "knip": "6.1.0",
+    "knip": "6.3.0",
     "lint-staged": "16.4.0",
-    "occt-wasm": "1.2.1",
+    "occt-wasm": "1.5.0",
     "prettier": "3.8.1",
     "size-limit": "12.0.1",
     "typedoc": "0.28.18",
     "typescript": "6.0.2",
-    "typescript-eslint": "8.57.3-alpha.3",
-    "vite": "8.0.3",
+    "typescript-eslint": "8.58.0",
+    "vite": "8.0.5",
     "vite-plugin-dts": "4.5.4",
     "vitest": "4.1.2"
   },