bloby-bot 0.70.12 → 0.70.13

package/scripts/install.ps1

@@ -29,6 +29,8 @@ $G5 = "`e[38;2;1;116;252m"
 $G6 = "`e[38;2;1;102;251m"
 $G7 = "`e[38;2;1;88;251m"
 $BOLD = "`e[1m"
+$DIM = "`e[2m"
+$YELLOW = "`e[33m"
 $RSET = "`e[0m"
 
 # Use ANSI sequences for consistent rendering; fallback to plain if no VT support
@@ -336,31 +338,50 @@ Setup-Path
 
 Write-Host ""
 if ($vtSupported) {
-    Write-Host "  ${PINK}${BOLD}✔  Bloby is ready!${RSET}"
+    Write-Host "  ${PINK}${BOLD}✔  Bloby is installed!${RSET}"
 } else {
-    Write-Host "  ✔  Bloby is ready!" -ForegroundColor Magenta
+    Write-Host "  ✔  Bloby is installed!" -ForegroundColor Magenta
 }
 Write-Host ""
-Write-Host "  -----------------------------" -ForegroundColor DarkGray
-Write-Host "  Get started:"
+if ($vtSupported) {
+    Write-Host "  ${BLUE}${BOLD}╭───────────────────────────────────────────────────────╮${RSET}"
+    Write-Host "  ${BLUE}${BOLD}│${RSET}                                                       ${RSET}${BLUE}${BOLD}│${RSET}"
+    Write-Host "  ${BLUE}${BOLD}│${RSET}${BOLD}   NEXT STEP  -  type this, then press Enter:${RSET}          ${BLUE}${BOLD}│${RSET}"
+    Write-Host "  ${BLUE}${BOLD}│${RSET}                                                       ${RSET}${BLUE}${BOLD}│${RSET}"
+    Write-Host "  ${BLUE}${BOLD}│${RSET}${BLUE}${BOLD}       >  bloby init${RSET}                                   ${BLUE}${BOLD}│${RSET}"
+    Write-Host "  ${BLUE}${BOLD}│${RSET}                                                       ${RSET}${BLUE}${BOLD}│${RSET}"
+    Write-Host "  ${BLUE}${BOLD}│${RSET}${DIM}   ─────────────────────────────────────────────────${RSET}   ${BLUE}${BOLD}│${RSET}"
+    Write-Host "  ${BLUE}${BOLD}│${RSET}                                                       ${RSET}${BLUE}${BOLD}│${RSET}"
+    Write-Host "  ${BLUE}${BOLD}│${RSET}${YELLOW}${BOLD}   Not working?  (`"command not found`")${RSET}                 ${BLUE}${BOLD}│${RSET}"
+    Write-Host "  ${BLUE}${BOLD}│${RSET}   Just open a NEW terminal window and run${RSET}             ${BLUE}${BOLD}│${RSET}"
+    Write-Host "  ${BLUE}${BOLD}│${RSET}   bloby init  again.${RSET}                                  ${BLUE}${BOLD}│${RSET}"
+    Write-Host "  ${BLUE}${BOLD}│${RSET}                                                       ${RSET}${BLUE}${BOLD}│${RSET}"
+    Write-Host "  ${BLUE}${BOLD}╰───────────────────────────────────────────────────────╯${RSET}"
+} else {
+    Write-Host "  +-------------------------------------------------------+" -ForegroundColor Cyan
+    Write-Host "  |                                                       |" -ForegroundColor Cyan
+    Write-Host "  |   NEXT STEP  -  type this, then press Enter:          |" -ForegroundColor Cyan
+    Write-Host "  |                                                       |" -ForegroundColor Cyan
+    Write-Host "  |       >  bloby init                                   |" -ForegroundColor Cyan
+    Write-Host "  |                                                       |" -ForegroundColor Cyan
+    Write-Host "  |   Not working?  (`"command not found`")                 |" -ForegroundColor Cyan
+    Write-Host "  |   Just open a NEW terminal window and run             |" -ForegroundColor Cyan
+    Write-Host "  |   bloby init  again.                                  |" -ForegroundColor Cyan
+    Write-Host "  |                                                       |" -ForegroundColor Cyan
+    Write-Host "  +-------------------------------------------------------+" -ForegroundColor Cyan
+}
 Write-Host ""
 if ($vtSupported) {
-    Write-Host "    ${BLUE}bloby init${RSET}      Set up your bot"
+    Write-Host "  ${DIM}Other commands:${RSET}"
     Write-Host "    ${BLUE}bloby start${RSET}     Start your bot"
     Write-Host "    ${BLUE}bloby status${RSET}    Check if it's running"
-    Write-Host ""
-    Write-Host "  ${PINK}>${RSET} Run ${BLUE}bloby init${RSET} to begin."
+    Write-Host "    ${BLUE}bloby help${RSET}      All commands"
 } else {
-    Write-Host "    bloby init      " -ForegroundColor Cyan -NoNewline; Write-Host "Set up your bot"
+    Write-Host "  Other commands:" -ForegroundColor DarkGray
     Write-Host "    bloby start     " -ForegroundColor Cyan -NoNewline; Write-Host "Start your bot"
     Write-Host "    bloby status    " -ForegroundColor Cyan -NoNewline; Write-Host "Check if it's running"
-    Write-Host ""
-    Write-Host "  > " -ForegroundColor Magenta -NoNewline
-    Write-Host "Run " -NoNewline
-    Write-Host "bloby init" -ForegroundColor Cyan -NoNewline
-    Write-Host " to begin."
+    Write-Host "    bloby help      " -ForegroundColor Cyan -NoNewline; Write-Host "All commands"
 }
-Write-Host "  (Open a new terminal if 'bloby' isn't found yet)" -ForegroundColor DarkGray
 Write-Host ""
 Write-Host "  https://bloby.bot" -ForegroundColor DarkGray
 Write-Host ""

package/scripts/install.sh

@@ -349,18 +349,26 @@ create_wrapper
 setup_path
 
 printf "\n"
-printf "  ${PINK}${BOLD}✔  Bloby is ready!${RESET}\n"
+printf "  ${PINK}${BOLD}✔  Bloby is installed!${RESET}\n"
 printf "\n"
-printf "  ${DIM}─────────────────────────────${RESET}\n"
-printf "  ${BOLD}Get started:${RESET}\n"
+printf "  ${BLUE}${BOLD}╭───────────────────────────────────────────────────────╮${RESET}\n"
+printf "  ${BLUE}${BOLD}│${RESET}                                                       ${RESET}${BLUE}${BOLD}│${RESET}\n"
+printf "  ${BLUE}${BOLD}│${RESET}${BOLD}   NEXT STEP  -  type this, then press Enter:${RESET}          ${BLUE}${BOLD}│${RESET}\n"
+printf "  ${BLUE}${BOLD}│${RESET}                                                       ${RESET}${BLUE}${BOLD}│${RESET}\n"
+printf "  ${BLUE}${BOLD}│${RESET}${BLUE}${BOLD}       >  bloby init${RESET}                                   ${BLUE}${BOLD}│${RESET}\n"
+printf "  ${BLUE}${BOLD}│${RESET}                                                       ${RESET}${BLUE}${BOLD}│${RESET}\n"
+printf "  ${BLUE}${BOLD}│${RESET}${DIM}   ─────────────────────────────────────────────────${RESET}   ${BLUE}${BOLD}│${RESET}\n"
+printf "  ${BLUE}${BOLD}│${RESET}                                                       ${RESET}${BLUE}${BOLD}│${RESET}\n"
+printf "  ${BLUE}${BOLD}│${RESET}${YELLOW}${BOLD}   Not working?  (\"command not found\")${RESET}                 ${BLUE}${BOLD}│${RESET}\n"
+printf "  ${BLUE}${BOLD}│${RESET}   Just open a NEW terminal window and run${RESET}             ${BLUE}${BOLD}│${RESET}\n"
+printf "  ${BLUE}${BOLD}│${RESET}   bloby init  again.${RESET}                                  ${BLUE}${BOLD}│${RESET}\n"
+printf "  ${BLUE}${BOLD}│${RESET}                                                       ${RESET}${BLUE}${BOLD}│${RESET}\n"
+printf "  ${BLUE}${BOLD}╰───────────────────────────────────────────────────────╯${RESET}\n"
 printf "\n"
-printf "    ${BLUE}bloby init${RESET}      Set up your bot\n"
+printf "  ${DIM}Other commands:${RESET}\n"
 printf "    ${BLUE}bloby start${RESET}     Start your bot\n"
 printf "    ${BLUE}bloby status${RESET}    Check if it's running\n"
 printf "    ${BLUE}bloby help${RESET}      All commands\n"
 printf "\n"
-printf "  ${PINK}>${RESET} Run ${BLUE}bloby init${RESET} to begin.\n"
-printf "  ${DIM}(Open a new terminal if 'bloby' isn't found yet)${RESET}\n"
-printf "\n"
 printf "  ${DIM}https://bloby.bot${RESET}\n"
 printf "\n"

package/shared/relay.ts

@@ -122,7 +122,9 @@ export function startHeartbeat(token: string, tunnelUrl?: string): void {
   };
 
   beat(); // immediate first beat
-  heartbeatTimer = setInterval(beat, 30_000); // every 30s
+  // Every 120s. The relay's HEARTBEAT_TIMEOUT_MS must stay well above this (currently
+  // 360s = 3 missed beats of grace) so a single dropped beat never flaps a healthy bot.
+  heartbeatTimer = setInterval(beat, 120_000);
 }
 
 export function stopHeartbeat(): void {

package/supervisor/channels/manager.ts

@@ -68,6 +68,17 @@ interface BufferedMessage {
   content: string;
 }
 
+/** Cap a rolling per-customer history buffer AND keep the window starting on a
+ *  user message. A blind length-splice can leave the window assistant-first,
+ *  which the Anthropic Messages API rejects outright once the pi harness sends
+ *  the buffer as structured chat history — every reply in that thread then
+ *  silently fails (audit C-7). Trimming at the source fixes it for every
+ *  provider flavor at once. */
+function trimCustomerBuffer(buf: BufferedMessage[]): void {
+  if (buf.length > MAX_BUFFER_MESSAGES) buf.splice(0, buf.length - MAX_BUFFER_MESSAGES);
+  while (buf.length > 0 && buf[0].role !== 'user') buf.shift();
+}
+
 interface DebounceEntry {
   messages: string[];
   attachments: InboundMessageAttachment[];
@@ -600,7 +611,7 @@ export class ChannelManager {
         const buf = this.customerBuffers.get(target.assistantBufferKey);
         if (buf) {
           buf.push({ role: 'assistant', content: eventData.content });
-          if (buf.length > MAX_BUFFER_MESSAGES) buf.splice(0, buf.length - MAX_BUFFER_MESSAGES);
+          trimCustomerBuffer(buf);
         }
       }
       return;
@@ -1305,10 +1316,8 @@ export class ChannelManager {
     // Add the new user message to the buffer
     buffer.push({ role: 'user', content: msg.text });
 
-    // Trim buffer to max size
-    if (buffer.length > MAX_BUFFER_MESSAGES) {
-      buffer.splice(0, buffer.length - MAX_BUFFER_MESSAGES);
-    }
+    // Trim buffer to max size (user-first — see trimCustomerBuffer)
+    trimCustomerBuffer(buffer);
 
     // Build recent messages for context (everything except the last one, which is the current message)
     const recentMessages: RecentMessage[] = buffer.length > 1
@@ -1376,9 +1385,7 @@ export class ChannelManager {
         if (type === 'bot:response' && eventData.content) {
           // Add full response to the conversation buffer
           buffer!.push({ role: 'assistant', content: eventData.content });
-          if (buffer!.length > MAX_BUFFER_MESSAGES) {
-            buffer!.splice(0, buffer!.length - MAX_BUFFER_MESSAGES);
-          }
+          trimCustomerBuffer(buffer!);
 
           // Send remaining text after the last tool use (or full response if no tools were used)
           const remaining = waChunkBuf.trim();
@@ -1424,9 +1431,7 @@ export class ChannelManager {
     }
     const label = fromMe ? 'me' : (senderName || chatId);
     buffer.push({ role: 'user', content: `[${label}]: ${text}` });
-    if (buffer.length > MAX_BUFFER_MESSAGES) {
-      buffer.splice(0, buffer.length - MAX_BUFFER_MESSAGES);
-    }
+    trimCustomerBuffer(buffer);
     log.info(`[channels] Assistant context stored: ${bufferKey} | ${buffer.length} msgs | [${label}]: "${text.slice(0, 60)}"`);
   }
 

package/supervisor/chat/OnboardWizard.tsx

@@ -3539,21 +3539,6 @@ export default function OnboardWizard({ onComplete, isInitialSetup = false, onSa
                 {/* ── Auth flow: Anthropic ── */}
                 {provider === 'anthropic' && (
                   <div className="space-y-2.5">
-                    {/* Anthropic third-party usage policy notice — shown to anyone considering Claude. */}
-                    <div className="rounded-xl border border-amber-500/20 bg-amber-500/[0.06] px-4 py-3.5">
-                      <div className="flex items-center gap-2 mb-2">
-                        <TriangleAlert className="h-4 w-4 text-amber-400 shrink-0" />
-                        <h3 className="text-[12.5px] font-semibold text-amber-200/90">Anthropic Third-Party App Policy Update</h3>
-                      </div>
-                      <div className="space-y-2 text-amber-100/70 text-[12px] leading-relaxed">
-                        <p>Starting June 15, 2026, Anthropic will provide a separate Third-Party App credit equal to the amount you pay for your subscription.</p>
-                        <p>For example, if you have the Max 5x plan at $100/month, you will receive $100 in credits to use with third-party tools like Bloby.</p>
-                        <p>Unfortunately, this is only a fraction of the usage Bloby users had before. We don&apos;t control Anthropic&apos;s rules, but we do need to follow them.</p>
-                        <p>The best alternative right now is a <span className="font-medium text-amber-100/90">ChatGPT subscription</span>, which also offers $100 and $200 plans with much higher usage limits for Bloby.</p>
-                        <p>In the short term, Bloby will be optimized for ChatGPT. In the long term, we are building our own model harness so Bloby has more control, more flexibility, and does not depend too heavily on providers that can change their rules at any moment.</p>
-                      </div>
-                    </div>
-
                     {isConnected && (
                       <div className="space-y-2.5">
                         <div className="bg-emerald-500/8 border border-emerald-500/15 rounded-lg px-3.5 py-2.5">