blitz-pdf 0.1.0 → 0.1.2

package/vendor/krilla/src/content.rs

@@ -0,0 +1,1352 @@
+//! A low-level abstraction over a single content stream.
+
+use std::cell::RefCell;
+use std::collections::HashSet;
+use std::rc::Rc;
+use std::sync::Arc;
+
+use float_cmp::approx_eq;
+use pdf_writer::types::TextRenderingMode;
+use pdf_writer::{Content, Finish, Name, Ref, Str, TextStr};
+use tiny_skia_path::{Path, PathSegment, PathVerb};
+
+use crate::chunk_container::ChunkContainer;
+use crate::color::rgb;
+use crate::configure::ValidationError;
+#[cfg(feature = "raster-images")]
+use crate::geom::Size;
+use crate::geom::{Point, Rect, Transform};
+use crate::graphics::color::{Color, ColorSpace};
+use crate::graphics::graphics_state::{ExtGState, GraphicsStates};
+#[cfg(feature = "raster-images")]
+use crate::graphics::image::Image;
+use crate::graphics::mask::Mask;
+use crate::graphics::paint::{Fill, FillRule, InnerPaint, LineCap, LineJoin, Paint, Stroke};
+use crate::graphics::shading_function::{
+    GradientProperties, GradientPropertiesExt, ShadingFunction,
+};
+use crate::graphics::shading_pattern::ShadingPattern;
+use crate::graphics::tiling_pattern::TilingPattern;
+use crate::graphics::xobject::XObject;
+use crate::interchange::tagging::ContentTag;
+use crate::num::NormalizedF32;
+use crate::resource;
+use crate::resource::{Resource, ResourceDictionaryBuilder};
+use crate::serialize::{MaybeDeviceColorSpace, SerializeContext};
+use crate::stream::Stream;
+use crate::text::group::{use_text_spanner, GlyphGroup, GlyphGrouper, GlyphSpan, GlyphSpanner};
+use crate::text::type3::ColoredGlyph;
+use crate::text::{Font, FontContainer, FontIdentifier, PdfFont, PDF_UNITS_PER_EM};
+use crate::text::{Glyph, GlyphId};
+use crate::util::{calculate_stroke_bbox, NameExt};
+
+pub(crate) struct ContentBuilder {
+    rd_builder: ResourceDictionaryBuilder,
+    content: Content,
+    validation_errors: HashSet<ValidationError>,
+    root_transform: Transform,
+    graphics_states: GraphicsStates,
+    bbox: Option<Rect>,
+    uses_mask: bool,
+    // Calculating the bbox of text is expensive, so we should avoid doing it if not needed.
+    // The only time we really need it is if we are currently inside of an XObject, where we
+    // need to provide a bbox of all its contents. If we are on the main page stream, we only
+    // need it if automatic size detection is enabled.
+    bbox_important: bool,
+    /// A temporary buffer that's reused across the builder.
+    scratch: Vec<u8>,
+    pub(crate) active_marked_content: bool,
+}
+
+/// Stores either a device-specific color space,
+/// or the name of a different colorspace (e.g. ICCBased) stored in
+/// the current resource dictionary
+enum ContentColorSpace {
+    Device,
+    Named(String),
+}
+
+impl ContentBuilder {
+    pub(crate) fn new(
+        root_transform: Transform,
+        bbox_important: bool,
+        sc: &SerializeContext,
+    ) -> Self {
+        Self {
+            rd_builder: ResourceDictionaryBuilder::new(),
+            validation_errors: HashSet::new(),
+            content: sc.new_content(),
+            root_transform,
+            uses_mask: false,
+            bbox_important,
+            graphics_states: GraphicsStates::new(),
+            bbox: None,
+            scratch: Vec::new(),
+            active_marked_content: false,
+        }
+    }
+
+    pub(crate) fn content_save_state(&mut self) {
+        self.content.save_state();
+
+        if self.content.state_nesting_depth() > 28 {
+            self.validation_errors
+                .insert(ValidationError::TooHighQNestingLevel);
+        }
+    }
+
+    pub(crate) fn finish(self, sc: &mut SerializeContext) -> Stream {
+        let buf = self.content.finish();
+        sc.register_limits(buf.limits());
+
+        Stream::new(
+            buf.to_vec(),
+            self.bbox
+                .unwrap_or(Rect::from_xywh(0.0, 0.0, 1.0, 1.0).unwrap()),
+            self.validation_errors.into_iter().collect(),
+            self.rd_builder.finish(),
+            self.uses_mask,
+        )
+    }
+
+    fn start_marked_content_prelude(&mut self) {
+        if self.active_marked_content {
+            panic!("can't start marked content twice");
+        }
+
+        self.active_marked_content = true;
+    }
+
+    #[track_caller]
+    pub(crate) fn start_marked_content(&mut self, name: Name) {
+        self.start_marked_content_prelude();
+        self.content.begin_marked_content(name);
+    }
+
+    #[track_caller]
+    pub(crate) fn start_marked_content_with_properties(
+        &mut self,
+        sc: &mut SerializeContext,
+        mcid: Option<i32>,
+        tag: ContentTag,
+    ) {
+        self.start_marked_content_prelude();
+
+        let mut mc = self
+            .content
+            .begin_marked_content_with_properties(tag.name());
+        let mut properties = mc.properties();
+
+        if let Some(mcid) = mcid {
+            properties.pairs([(Name(b"MCID"), mcid)]);
+        }
+
+        // Page height extracted from transform and passed to function to allow
+        // its dependants to flip the y-axis, mirroring Krilla conventions.
+        let page_height = self.root_transform.ty();
+        tag.write_properties(sc, properties, page_height);
+    }
+
+    pub(crate) fn end_marked_content(&mut self) {
+        if !self.active_marked_content {
+            panic!("can't end marked content when none has been started");
+        }
+
+        self.content.end_marked_content();
+        self.active_marked_content = false;
+    }
+
+    pub(crate) fn concat_transform(&mut self, transform: &Transform) {
+        self.graphics_states.transform(*transform);
+    }
+
+    fn cur_transform_with_root_transform(&self) -> Transform {
+        self.root_transform.pre_concat(self.cur_transform())
+    }
+
+    pub(crate) fn cur_transform(&self) -> Transform {
+        self.graphics_states.cur().transform()
+    }
+
+    pub(crate) fn save_graphics_state(&mut self) {
+        self.graphics_states.save_state();
+    }
+
+    pub(crate) fn restore_graphics_state(&mut self) {
+        self.graphics_states.restore_state();
+    }
+
+    pub(crate) fn set_blend_mode(&mut self, blend_mode: pdf_writer::types::BlendMode) {
+        if blend_mode != pdf_writer::types::BlendMode::Normal {
+            let state = ExtGState::new().blend_mode(blend_mode);
+            self.graphics_states.combine(&state);
+        }
+    }
+
+    pub(crate) fn expand_bbox(&mut self, new_bbox: Rect) {
+        let new_bbox = self.graphics_states.transform_bbox(new_bbox);
+        if let Some(bbox) = &mut self.bbox {
+            bbox.expand(&new_bbox);
+        } else {
+            self.bbox = Some(new_bbox);
+        }
+    }
+
+    pub(crate) fn draw_path(
+        &mut self,
+        path: &Path,
+        mut fill: Option<&Fill>,
+        stroke: Option<&Stroke>,
+        sc: &mut SerializeContext,
+        chunk_container: &mut ChunkContainer,
+    ) {
+        if fill.is_none() && stroke.is_none() {
+            return;
+        }
+
+        // Zero-size geometry, don't draw.
+        if path.bounds().width() == 0.0 && path.bounds().height() == 0.0 {
+            return;
+        }
+
+        // See issue 199.
+        let is_line = path.verbs().len() == 2
+            && path.verbs()[0] == PathVerb::Move
+            && path.verbs()[1] == PathVerb::Line;
+        let dont_fill = path.bounds().width() == 0.0 || path.bounds().height() == 0.0 || is_line;
+
+        if dont_fill {
+            match stroke.is_some() {
+                // Some PDF viewers have bugs where they slightly fill zero-sized lines, so
+                // don't draw them in the first place.
+                false => return,
+                // Don't fill, but we still want to draw the stroke, so don't return.
+                true => {
+                    fill = None;
+                }
+            }
+        }
+
+        let bbox_important = self.bbox_important;
+        let calculate_bbox = |is_solid: bool| bbox_important || !is_solid;
+
+        let stroke_bbox = |stroke: &Stroke| {
+            if calculate_bbox(matches!(&stroke.paint.0, InnerPaint::Color(_))) {
+                calculate_stroke_bbox(stroke, path).unwrap_or(Rect::from_tsp(path.bounds()))
+            } else {
+                Rect::from_tsp(path.bounds())
+            }
+        };
+
+        let fill_prep = |sb: &mut ContentBuilder, fill: &Fill| {
+            let has_pattern = matches!(fill.paint.0, InnerPaint::Pattern(_));
+            let fill_opacity = fill.opacity;
+            sb.expand_bbox(Rect::from_tsp(path.bounds()));
+
+            // PDF viewers don't show patterns with fill/stroke opacities consistently.
+            // Because of this, the opacity is accounted for in the pattern itself.
+            if !has_pattern {
+                sb.set_fill_opacity(fill_opacity);
+            }
+        };
+
+        let stroke_prep = |sb: &mut ContentBuilder, stroke: &Stroke, stroke_bbox: Rect| {
+            let is_pattern = matches!(stroke.paint.0, InnerPaint::Pattern(_));
+            let stroke_opacity = stroke.opacity;
+            sb.expand_bbox(stroke_bbox);
+
+            // See comment in `set_fill_properties`
+            if !is_pattern {
+                sb.set_stroke_opacity(stroke_opacity);
+            }
+        };
+
+        let fill_op = |sb: &mut ContentBuilder,
+                       sc: &mut SerializeContext,
+                       chunk_container: &mut ChunkContainer,
+                       fill: &Fill| {
+            let fill_rule = fill.rule;
+            sb.content_set_fill_properties(
+                Rect::from_tsp(path.bounds()),
+                fill,
+                sc,
+                chunk_container,
+            );
+            sb.content_draw_path(path.segments());
+
+            match fill_rule {
+                FillRule::NonZero => sb.content.fill_nonzero(),
+                FillRule::EvenOdd => sb.content.fill_even_odd(),
+            };
+        };
+
+        let stroke_op = |sb: &mut ContentBuilder,
+                         sc: &mut SerializeContext,
+                         chunk_container: &mut ChunkContainer,
+                         stroke: &Stroke,
+                         stroke_bbox: Rect| {
+            sb.content_set_stroke_properties(stroke_bbox, stroke, sc, chunk_container);
+            sb.content_draw_path(path.segments());
+            sb.content.stroke();
+        };
+
+        let fill_stroke_op = |sb: &mut ContentBuilder,
+                              sc: &mut SerializeContext,
+                              chunk_container: &mut ChunkContainer,
+                              fill: &Fill,
+                              stroke: &Stroke,
+                              stroke_bbox: Rect| {
+            let fill_rule = fill.rule;
+            sb.content_set_fill_properties(
+                Rect::from_tsp(path.bounds()),
+                fill,
+                sc,
+                chunk_container,
+            );
+            sb.content_set_stroke_properties(stroke_bbox, stroke, sc, chunk_container);
+            sb.content_draw_path(path.segments());
+
+            match fill_rule {
+                FillRule::NonZero => sb.content.fill_nonzero_and_stroke(),
+                FillRule::EvenOdd => sb.content.fill_even_odd_and_stroke(),
+            };
+        };
+
+        match (fill, stroke) {
+            (Some(fill), None) => {
+                self.apply_isolated_op(
+                    |sb, _, _| {
+                        fill_prep(sb, fill);
+                    },
+                    |sb, sc, chunk_container| {
+                        fill_op(sb, sc, chunk_container, fill);
+                    },
+                    sc,
+                    chunk_container,
+                );
+            }
+            (None, Some(stroke)) => {
+                let stroke_bbox = stroke_bbox(stroke);
+
+                self.apply_isolated_op(
+                    |sb, _, _| {
+                        stroke_prep(sb, stroke, stroke_bbox);
+                    },
+                    |sb, sc, chunk_container| {
+                        stroke_op(sb, sc, chunk_container, stroke, stroke_bbox);
+                    },
+                    sc,
+                    chunk_container,
+                );
+            }
+            (Some(fill), Some(stroke)) => {
+                let stroke_bbox = stroke_bbox(stroke);
+
+                self.apply_isolated_op(
+                    |sb, _, _| {
+                        fill_prep(sb, fill);
+                        stroke_prep(sb, stroke, stroke_bbox);
+                    },
+                    |sb, sc, chunk_container| {
+                        fill_stroke_op(sb, sc, chunk_container, fill, stroke, stroke_bbox);
+                    },
+                    sc,
+                    chunk_container,
+                );
+            }
+            (None, None) => unreachable!(),
+        }
+    }
+
+    pub(crate) fn push_clip_path(&mut self, path: &Path, clip_rule: &FillRule) {
+        self.content_save_state();
+        self.content_draw_path(
+            path.clone()
+                .transform(self.cur_transform_with_root_transform().to_tsp())
+                .unwrap()
+                .segments(),
+        );
+
+        match clip_rule {
+            FillRule::NonZero => self.content.clip_nonzero(),
+            FillRule::EvenOdd => self.content.clip_even_odd(),
+        };
+
+        self.content.end_path();
+    }
+
+    pub(crate) fn pop_clip_path(&mut self) {
+        self.content.restore_state();
+    }
+
+    #[allow(clippy::too_many_arguments)]
+    pub(crate) fn draw_glyphs(
+        &mut self,
+        start: Point,
+        sc: &mut SerializeContext,
+        chunk_container: &mut ChunkContainer,
+        fill: Option<&Fill>,
+        stroke: Option<&Stroke>,
+        context_color: rgb::Color,
+        glyphs: &[impl Glyph],
+        font: Font,
+        text: &str,
+        font_size: f32,
+    ) {
+        if fill.is_none() && stroke.is_none() {
+            return;
+        }
+
+        let (x, y) = (start.x, start.y);
+        self.graphics_states.save_state();
+
+        // Calculating the glyphs bbox is very expensive but not always necessary, so omit
+        // if not needed.
+        let bbox_important = self.bbox_important;
+        let calculate_bbox = |is_solid: bool| bbox_important || !is_solid;
+
+        let fill_action = |sb: &mut ContentBuilder,
+                           sc: &mut SerializeContext,
+                           chunk_container: &mut ChunkContainer,
+                           fill: &Fill| {
+            let bbox = if calculate_bbox(matches!(&fill.paint.0, InnerPaint::Color(_))) {
+                let bbox = get_glyphs_bbox(glyphs, x, y, font_size, font.clone());
+                sb.expand_bbox(bbox);
+                bbox
+            } else {
+                Rect::from_xywh(0.0, 0.0, 1.0, 1.0).unwrap()
+            };
+
+            sb.content_set_fill_properties(bbox, fill, sc, chunk_container)
+        };
+
+        let stroke_action = |sb: &mut ContentBuilder,
+                             sc: &mut SerializeContext,
+                             chunk_container: &mut ChunkContainer,
+                             stroke: &Stroke| {
+            let bbox = if calculate_bbox(matches!(&stroke.paint.0, InnerPaint::Color(_))) {
+                // TODO: Bbox should also account for stroke.
+                let bbox = get_glyphs_bbox(glyphs, x, y, font_size, font.clone());
+                sb.expand_bbox(bbox);
+                bbox
+            } else {
+                Rect::from_xywh(0.0, 0.0, 1.0, 1.0).unwrap()
+            };
+
+            sb.content_set_stroke_properties(bbox, stroke, sc, chunk_container);
+        };
+
+        let set_fill_opacity = |sb: &mut ContentBuilder, fill: &Fill| {
+            // PDF viewers don't show patterns with fill/stroke opacities consistently.
+            // Because of this, the opacity is accounted for in the pattern itself.
+            if !matches!(&fill.paint.0, &InnerPaint::Pattern(_)) {
+                sb.set_fill_opacity(fill.opacity);
+            }
+        };
+
+        let set_stroke_opacity = |sb: &mut ContentBuilder, stroke: &Stroke| {
+            // PDF viewers don't show patterns with fill/stroke opacities consistently.
+            // Because of this, the opacity is accounted for in the pattern itself.
+            if !matches!(&stroke.paint.0, &InnerPaint::Pattern(_)) {
+                // PDF viewers don't show patterns with fill/stroke opacities consistently.
+                // Because of this, the opacity is accounted for in the pattern itself.
+                sb.set_stroke_opacity(stroke.opacity);
+
+                // See the comment in `stroke-action` for why we also set the fill opacity.
+                sb.set_fill_opacity(stroke.opacity);
+            }
+        };
+
+        match (fill, stroke) {
+            (Some(f), Some(s)) => {
+                set_fill_opacity(self, f);
+                set_stroke_opacity(self, s);
+
+                self.fill_stroke_glyph_run(
+                    x,
+                    y,
+                    sc,
+                    chunk_container,
+                    TextRenderingMode::FillStroke,
+                    |sb, sc, chunk_container| {
+                        fill_action(sb, sc, chunk_container, f);
+                        stroke_action(sb, sc, chunk_container, s);
+                    },
+                    glyphs,
+                    font.clone(),
+                    context_color,
+                    text,
+                    font_size,
+                );
+            }
+            (Some(f), None) => {
+                set_fill_opacity(self, f);
+
+                self.fill_stroke_glyph_run(
+                    x,
+                    y,
+                    sc,
+                    chunk_container,
+                    TextRenderingMode::Fill,
+                    |sb, sc, chunk_container| {
+                        fill_action(sb, sc, chunk_container, f);
+                    },
+                    glyphs,
+                    font.clone(),
+                    context_color,
+                    text,
+                    font_size,
+                );
+            }
+            (None, Some(s)) => {
+                set_stroke_opacity(self, s);
+
+                self.fill_stroke_glyph_run(
+                    x,
+                    y,
+                    sc,
+                    chunk_container,
+                    TextRenderingMode::Stroke,
+                    |sb, sc, chunk_container| {
+                        stroke_action(sb, sc, chunk_container, s);
+                    },
+                    glyphs,
+                    font.clone(),
+                    context_color,
+                    text,
+                    font_size,
+                );
+            }
+            (None, None) => unreachable!(),
+        }
+
+        self.graphics_states.restore_state();
+    }
+
+    /// Encode a successive sequence of glyphs that share the same properties and
+    /// can be encoded with one text showing operator.
+    #[allow(clippy::too_many_arguments)]
+    #[inline(always)]
+    fn encode_consecutive_glyph_run(
+        &mut self,
+        sc: &mut SerializeContext,
+        cur_x: &mut f32,
+        cur_y: f32,
+        font_identifier: FontIdentifier,
+        pdf_font: &dyn PdfFont,
+        size: f32,
+        context_color: rgb::Color,
+        glyphs: &[impl Glyph],
+        text: &str,
+    ) {
+        let font_name = self
+            .rd_builder
+            .register_resource(sc.register_font_identifier(font_identifier));
+        self.content.set_font(font_name.to_pdf_name(), size);
+        self.content.set_text_matrix(
+            Transform::from_row(1.0, 0.0, 0.0, -1.0, *cur_x, cur_y).to_pdf_transform(),
+        );
+
+        for glyph in glyphs {
+            if glyph.glyph_id() == GlyphId::new(0)
+                || pdf_font.font().postscript_name() == Some("LastResort")
+            {
+                sc.register_validation_error(ValidationError::ContainsNotDefGlyph(
+                    pdf_font.font(),
+                    glyph.location(),
+                    text[glyph.text_range()].to_string(),
+                ));
+            }
+        }
+
+        // If it's just a single glyph and without an x_offset, there is no need for individual
+        // positioning, so we can use `Tj` instead of `TJ`. The reason we're doing this is because
+        // Acrobat's copy-paste is a bit buggy if `/ActualText` is used at the end of a line, but
+        // only if `TJ` is used. With `Tj`, it's fine.
+        if let [glyph] = glyphs {
+            if approx_eq!(f32, glyph.x_offset(1.0), 0.0, epsilon = 0.001) {
+                self.encode_single_glyph(cur_x, pdf_font, size, context_color, glyph);
+                return;
+            }
+        }
+
+        self.encode_glyphs_with_individual_positioning(
+            cur_x,
+            pdf_font,
+            size,
+            context_color,
+            glyphs,
+        );
+    }
+
+    fn encode_single_glyph(
+        &mut self,
+        cur_x: &mut f32,
+        pdf_font: &dyn PdfFont,
+        size: f32,
+        context_color: rgb::Color,
+        glyph: &impl Glyph,
+    ) {
+        let pdf_glyph = pdf_font
+            .get_gid(ColoredGlyph::new(glyph.glyph_id(), context_color))
+            .unwrap();
+        self.scratch.clear();
+        let encoded = &mut self.scratch;
+        pdf_glyph.encode_into(encoded);
+        self.content.show(Str(encoded));
+        *cur_x += glyph.x_advance(size);
+    }
+
+    fn encode_glyphs_with_individual_positioning(
+        &mut self,
+        cur_x: &mut f32,
+        pdf_font: &dyn PdfFont,
+        size: f32,
+        context_color: rgb::Color,
+        glyphs: &[impl Glyph],
+    ) {
+        self.scratch.clear();
+        let encoded = &mut self.scratch;
+
+        let mut adjustment = 0.0;
+        let mut positioned = self.content.show_positioned();
+        let mut items = positioned.items();
+
+        for glyph in glyphs {
+            let pdf_glyph = pdf_font
+                .get_gid(ColoredGlyph::new(glyph.glyph_id(), context_color))
+                .unwrap();
+
+            let scale = |val| val * pdf_font.units_per_em();
+
+            let x_advance = scale(glyph.x_advance(1.0));
+            let font_advance = pdf_font
+                .font()
+                .advance_width(glyph.glyph_id())
+                .map(|n| scale(n / pdf_font.font().units_per_em()));
+            let x_offset = scale(glyph.x_offset(1.0));
+
+            adjustment += x_offset;
+
+            // Make sure we don't write miniscule adjustments
+            if !approx_eq!(f32, adjustment, 0.0, epsilon = 0.001) {
+                if !encoded.is_empty() {
+                    items.show(Str(encoded));
+                    encoded.clear();
+                }
+
+                // Adjustment is always in 1000 units, even for Type3 fonts.
+                items.adjust(-(adjustment / pdf_font.units_per_em() * PDF_UNITS_PER_EM));
+                adjustment = 0.0;
+            }
+
+            pdf_glyph.encode_into(encoded);
+
+            if let Some(font_advance) = font_advance {
+                adjustment += x_advance - font_advance;
+            }
+
+            adjustment -= x_offset;
+            // cur_x/cur_y and glyph metrics are in user space units.
+            *cur_x += glyph.x_advance(size);
+        }
+
+        if !encoded.is_empty() {
+            items.show(Str(encoded));
+        }
+
+        items.finish();
+        positioned.finish();
+    }
+
+    #[allow(clippy::too_many_arguments)]
+    fn fill_stroke_glyph_run(
+        &mut self,
+        x: f32,
+        ys: f32,
+        sc: &mut SerializeContext,
+        chunk_container: &mut ChunkContainer,
+        fill_render_mode: TextRenderingMode,
+        action: impl FnOnce(&mut ContentBuilder, &mut SerializeContext, &mut ChunkContainer),
+        glyphs: &[impl Glyph],
+        font: Font,
+        context_color: rgb::Color,
+        text: &str,
+        font_size: f32,
+    ) {
+        if glyphs.is_empty() {
+            return;
+        }
+
+        self.apply_isolated_op(
+            |_, _, _| {},
+            |sb, sc, chunk_container| {
+                let mut cur_x = x;
+                let mut cur_y = ys;
+
+                // When the glyph ranges are monotonically decreasing, the glyphs are in reverse
+                // order and we should write `/ReversedChars` marked content.
+                let reversed = glyphs.len() > 1
+                    && glyphs
+                        .windows(2)
+                        .all(|w| w[0].text_range().start >= w[1].text_range().end);
+
+                action(sb, sc, chunk_container);
+                sb.content.begin_text();
+
+                let font_container = sc.register_font_container(font.clone());
+                let do_text_span = reversed
+                    || use_text_spanner(
+                        glyphs,
+                        text,
+                        context_color,
+                        &mut font_container.borrow_mut(),
+                    );
+
+                if do_text_span {
+                    // Separate into distinct glyph runs that either are encoded using actual text, or are
+                    // not.
+                    let spanned = GlyphSpanner::new(
+                        glyphs,
+                        text,
+                        reversed,
+                        sc.serialize_settings()
+                            .validators()
+                            .requires_codepoint_mappings(),
+                        context_color,
+                        font_container.clone(),
+                    );
+
+                    for fragment in spanned {
+                        sb.fill_stroke_glyph_span(
+                            &mut cur_x,
+                            &mut cur_y,
+                            fragment,
+                            sc,
+                            fill_render_mode,
+                            font_container.clone(),
+                            context_color,
+                            text,
+                            font_size,
+                            reversed,
+                        )
+                    }
+                } else {
+                    let glyph_span = GlyphSpan::Unspanned(glyphs);
+
+                    sb.fill_stroke_glyph_span(
+                        &mut cur_x,
+                        &mut cur_y,
+                        glyph_span,
+                        sc,
+                        fill_render_mode,
+                        font_container.clone(),
+                        context_color,
+                        text,
+                        font_size,
+                        reversed,
+                    )
+                }
+
+                sb.content.end_text();
+            },
+            sc,
+            chunk_container,
+        )
+    }
+
+    #[allow(clippy::too_many_arguments)]
+    fn fill_stroke_glyph_span(
+        &mut self,
+        cur_x: &mut f32,
+        cur_y: &mut f32,
+        fragment: GlyphSpan<'_, impl Glyph>,
+        sc: &mut SerializeContext,
+        fill_render_mode: TextRenderingMode,
+        font_container: Rc<RefCell<FontContainer>>,
+        context_color: rgb::Color,
+        text: &str,
+        font_size: f32,
+        reversed: bool,
+    ) {
+        if let Some(text) = fragment.actual_text() {
+            let mut actual_text = self
+                .content
+                .begin_marked_content_with_properties(Name(b"Span"));
+            actual_text.properties().actual_text(TextStr(text));
+        }
+
+        if reversed {
+            self.content.begin_marked_content(Name(b"ReversedChars"));
+        }
+
+        // Segment into glyph runs that can be encoded in one go using a PDF
+        // text showing operator (i.e. no y shift, same Type3 font, etc.)
+        let segmented = GlyphGrouper::new(font_container.clone(), context_color, fragment.glyphs());
+
+        for glyph_group in segmented {
+            self.fill_stroke_glyph_group(
+                cur_x,
+                cur_y,
+                glyph_group,
+                sc,
+                fill_render_mode,
+                font_container.clone(),
+                context_color,
+                text,
+                font_size,
+            )
+        }
+
+        if reversed {
+            self.content.end_marked_content();
+        }
+
+        if fragment.actual_text().is_some() {
+            self.content.end_marked_content();
+        }
+    }
+
+    #[allow(clippy::too_many_arguments)]
+    fn fill_stroke_glyph_group(
+        &mut self,
+        cur_x: &mut f32,
+        cur_y: &mut f32,
+        glyph_group: GlyphGroup<'_, impl Glyph>,
+        sc: &mut SerializeContext,
+        fill_render_mode: TextRenderingMode,
+        font_container: Rc<RefCell<FontContainer>>,
+        context_color: rgb::Color,
+        text: &str,
+        font_size: f32,
+    ) {
+        let borrowed = font_container.borrow();
+        let pdf_font = borrowed
+            .get_from_identifier(glyph_group.font_identifier.clone())
+            .unwrap();
+
+        if fill_render_mode == TextRenderingMode::Fill || pdf_font.force_fill() {
+            self.content
+                .set_text_rendering_mode(TextRenderingMode::Fill);
+        } else if fill_render_mode == TextRenderingMode::FillStroke {
+            self.content
+                .set_text_rendering_mode(TextRenderingMode::FillStroke);
+        } else {
+            self.content
+                .set_text_rendering_mode(TextRenderingMode::Stroke);
+        }
+
+        self.encode_consecutive_glyph_run(
+            sc,
+            cur_x,
+            *cur_y - glyph_group.y_offset * font_size,
+            glyph_group.font_identifier,
+            pdf_font,
+            font_size,
+            context_color,
+            glyph_group.glyphs,
+            text,
+        );
+
+        *cur_y -= glyph_group.y_advance * font_size;
+    }
+
+    pub(crate) fn draw_xobject(
+        &mut self,
+        sc: &mut SerializeContext,
+        chunk_container: &mut ChunkContainer,
+        x_object: XObject,
+        state: &ExtGState,
+    ) {
+        let bbox = x_object.bbox();
+        self.apply_isolated_op(
+            |sb, _, _| {
+                sb.graphics_states.combine(state);
+                sb.expand_bbox(bbox);
+            },
+            move |sb, sc, chunk_container| {
+                let x_object_name = sb
+                    .rd_builder
+                    .register_resource(sc.register_resourceable(chunk_container, x_object));
+                sb.content.x_object(x_object_name.to_pdf_name());
+            },
+            sc,
+            chunk_container,
+        );
+    }
+
+    #[allow(dead_code)]
+    pub(crate) fn draw_xobject_by_reference(
+        &mut self,
+        sc: &mut SerializeContext,
+        chunk_container: &mut ChunkContainer,
+        bbox: Rect,
+        x_object: Ref,
+    ) {
+        // TODO: Consider bbox of XObject somehow?
+        self.apply_isolated_op(
+            |sb, _, _| {
+                sb.expand_bbox(bbox);
+            },
+            move |sb, _, _| {
+                let x_object_name = sb
+                    .rd_builder
+                    .register_resource(resource::XObject::new(x_object));
+                sb.content.x_object(x_object_name.to_pdf_name());
+            },
+            sc,
+            chunk_container,
+        );
+    }
+
+    pub(crate) fn draw_masked(
+        &mut self,
+        sc: &mut SerializeContext,
+        chunk_container: &mut ChunkContainer,
+        mask: Mask,
+        stream: Stream,
+    ) {
+        let state = ExtGState::new().mask(mask, sc, chunk_container);
+        self.uses_mask = true;
+        let x_object = XObject::new(stream, false, true, None);
+        self.draw_xobject(sc, chunk_container, x_object, &state);
+    }
+
+    pub(crate) fn draw_opacified(
+        &mut self,
+        sc: &mut SerializeContext,
+        chunk_container: &mut ChunkContainer,
+        opacity: NormalizedF32,
+        stream: Stream,
+    ) {
+        let state = ExtGState::new()
+            .stroking_alpha(opacity)
+            .non_stroking_alpha(opacity);
+        let x_object = XObject::new(stream, true, false, None);
+        self.draw_xobject(sc, chunk_container, x_object, &state);
+    }
+
+    pub(crate) fn draw_isolated(
+        &mut self,
+        sc: &mut SerializeContext,
+        chunk_container: &mut ChunkContainer,
+        stream: Stream,
+    ) {
+        let state = ExtGState::new();
+        let x_object = XObject::new(stream, true, false, None);
+        self.draw_xobject(sc, chunk_container, x_object, &state);
+    }
+
+    #[cfg(feature = "raster-images")]
+    pub(crate) fn draw_image(
+        &mut self,
+        image: Image,
+        size: Size,
+        sc: &mut SerializeContext,
+        chunk_container: &mut ChunkContainer,
+    ) {
+        self.apply_isolated_op(
+            |sb, _, _| {
+                // Scale the image from 1x1 to the actual dimensions.
+                let transform =
+                    Transform::from_row(size.width(), 0.0, 0.0, -size.height(), 0.0, size.height());
+                sb.concat_transform(&transform);
+                sb.expand_bbox(Rect::from_xywh(0.0, 0.0, 1.0, 1.0).unwrap());
+            },
+            move |sb, sc, chunk_container| {
+                let image_name = sb.rd_builder.register_resource(resource::XObject::new(
+                    sc.register_image(chunk_container, image),
+                ));
+
+                sb.content.x_object(image_name.to_pdf_name());
+            },
+            sc,
+            chunk_container,
+        );
+    }
+
+    pub(crate) fn draw_shading(
+        &mut self,
+        shading: &ShadingFunction,
+        sc: &mut SerializeContext,
+        chunk_container: &mut ChunkContainer,
+    ) {
+        self.apply_isolated_op(
+            |_, _, _| {},
+            move |sb, sc, chunk_container| {
+                let sh = sb
+                    .rd_builder
+                    .register_resource(sc.register_resourceable(chunk_container, shading.clone()));
+                sb.content.shading(sh.to_pdf_name());
+            },
+            sc,
+            chunk_container,
+        )
+    }
+
+    fn set_fill_opacity(&mut self, alpha: NormalizedF32) {
+        if alpha.get() != 1.0 {
+            let state = ExtGState::new().non_stroking_alpha(alpha);
+            self.graphics_states.combine(&state);
+        }
+    }
+
+    fn set_stroke_opacity(&mut self, alpha: NormalizedF32) {
+        if alpha.get() != 1.0 {
+            let state = ExtGState::new().stroking_alpha(alpha);
+            self.graphics_states.combine(&state);
+        }
+    }
+
+    fn apply_isolated_op(
+        &mut self,
+        prep: impl FnOnce(&mut Self, &mut SerializeContext, &mut ChunkContainer),
+        op: impl FnOnce(&mut Self, &mut SerializeContext, &mut ChunkContainer),
+        sc: &mut SerializeContext,
+        chunk_container: &mut ChunkContainer,
+    ) {
+        self.save_graphics_state();
+        self.content_save_state();
+
+        prep(self, sc, chunk_container);
+
+        let transform = self.cur_transform_with_root_transform();
+
+        if transform != Transform::identity() {
+            self.content.transform(transform.to_pdf_transform());
+        }
+
+        let state = self.graphics_states.cur().ext_g_state().clone();
+
+        if !state.empty() {
+            let ext = self.rd_builder.register_resource::<resource::ExtGState>(
+                sc.register_resourceable(chunk_container, state),
+            );
+            self.content.set_parameters(ext.to_pdf_name());
+        }
+
+        op(self, sc, chunk_container);
+
+        self.content.restore_state();
+        self.restore_graphics_state();
+    }
+
+    #[allow(clippy::too_many_arguments)]
+    fn content_set_fill_stroke_properties(
+        &mut self,
+        bounds: Rect,
+        paint: &Paint,
+        opacity: NormalizedF32,
+        sc: &mut SerializeContext,
+        chunk_container: &mut ChunkContainer,
+        mut set_pattern_fn: impl FnMut(&mut Content, String),
+        mut set_solid_fn: impl FnMut(&mut Content, ContentColorSpace, &Color),
+    ) {
+        let pattern_transform = |transform: Transform| -> Transform {
+            transform.post_concat(self.cur_transform_with_root_transform())
+        };
+
+        let mut write_gradient =
+            |gradient_props: GradientProperties,
+             sc: &mut SerializeContext,
+             chunk_container: &mut ChunkContainer,
+             transform: Transform,
+             content_builder: &mut ContentBuilder| {
+                if let Some((color, opacity)) = gradient_props.single_stop_color() {
+                    // Write gradients with one stop as a solid color fill.
+                    content_builder.set_fill_opacity(opacity);
+                    let cs = color.color_space(sc);
+                    let color_space_resource =
+                        Self::cs_to_content_cs(content_builder, sc, chunk_container, cs);
+                    set_solid_fn(&mut content_builder.content, color_space_resource, color);
+                } else {
+                    let shading_mask = Mask::new_from_shading(
+                        gradient_props.clone(),
+                        transform,
+                        bounds,
+                        sc,
+                        chunk_container,
+                    );
+
+                    let shading_pattern = ShadingPattern::new(
+                        gradient_props,
+                        content_builder
+                            .cur_transform_with_root_transform()
+                            .pre_concat(transform),
+                    );
+                    let color_space = content_builder
+                        .rd_builder
+                        .register_resource::<resource::Pattern>(
+                            sc.register_resourceable(chunk_container, shading_pattern),
+                        );
+
+                    if let Some(shading_mask) = shading_mask {
+                        let state = ExtGState::new().mask(shading_mask, sc, chunk_container);
+                        content_builder.uses_mask = true;
+
+                        let ext = content_builder
+                            .rd_builder
+                            .register_resource::<resource::ExtGState>(
+                                sc.register_resourceable(chunk_container, state),
+                            );
+                        content_builder.content.set_parameters(ext.to_pdf_name());
+                    }
+
+                    set_pattern_fn(&mut content_builder.content, color_space);
+                }
+            };
+
+        match &paint.0 {
+            InnerPaint::Color(c) => {
+                let cs = c.color_space(sc);
+                let color_space_resource = Self::cs_to_content_cs(self, sc, chunk_container, cs);
+                set_solid_fn(&mut self.content, color_space_resource, c);
+            }
+            InnerPaint::LinearGradient(lg) => {
+                let (gradient_props, transform) = lg.clone().gradient_properties(bounds);
+                write_gradient(gradient_props, sc, chunk_container, transform, self);
+            }
+            InnerPaint::RadialGradient(rg) => {
+                let (gradient_props, transform) = rg.clone().gradient_properties(bounds);
+                write_gradient(gradient_props, sc, chunk_container, transform, self);
+            }
+            InnerPaint::SweepGradient(sg) => {
+                let (gradient_props, transform) = sg.clone().gradient_properties(bounds);
+                write_gradient(gradient_props, sc, chunk_container, transform, self);
+            }
+            InnerPaint::Pattern(pat) => {
+                let mut pat = Arc::unwrap_or_clone(pat.clone());
+                pat.transform = pattern_transform(pat.transform);
+
+                let tiling_pattern = TilingPattern::new(
+                    pat.stream,
+                    pat.transform,
+                    opacity,
+                    pat.width,
+                    pat.height,
+                    sc,
+                    chunk_container,
+                );
+
+                let color_space = self.rd_builder.register_resource::<resource::Pattern>(
+                    sc.register_resourceable(chunk_container, tiling_pattern),
+                );
+                set_pattern_fn(&mut self.content, color_space);
+            }
+        }
+    }
+
+    fn cs_to_content_cs(
+        content_builder: &mut ContentBuilder,
+        sc: &mut SerializeContext,
+        chunk_container: &mut ChunkContainer,
+        cs: ColorSpace,
+    ) -> ContentColorSpace {
+        match sc.register_colorspace(chunk_container, cs) {
+            MaybeDeviceColorSpace::ColorSpace(s) => {
+                ContentColorSpace::Named(content_builder.rd_builder.register_resource(s))
+            }
+            MaybeDeviceColorSpace::DeviceGray => ContentColorSpace::Device,
+            MaybeDeviceColorSpace::DeviceRgb => ContentColorSpace::Device,
+            MaybeDeviceColorSpace::DeviceCMYK => ContentColorSpace::Device,
+        }
+    }
+
+    fn content_set_fill_properties(
+        &mut self,
+        bounds: Rect,
+        fill: &Fill,
+        serializer_context: &mut SerializeContext,
+        chunk_container: &mut ChunkContainer,
+    ) {
+        fn set_pattern_fn(content: &mut Content, color_space: String) {
+            content.set_fill_color_space(pdf_writer::types::ColorSpaceOperand::Pattern);
+            content.set_fill_pattern(None, color_space.to_pdf_name());
+        }
+
+        fn set_solid_fn(content: &mut Content, color_space: ContentColorSpace, color: &Color) {
+            match color_space {
+                ContentColorSpace::Device => match color {
+                    Color::Regular(crate::color::RegularColor::Rgb(r)) => {
+                        let comps = r.to_pdf_color();
+                        content.set_fill_rgb(comps[0], comps[1], comps[2]);
+                    }
+                    Color::Regular(crate::color::RegularColor::Luma(l)) => {
+                        content.set_fill_gray(l.to_pdf_color());
+                    }
+                    Color::Regular(crate::color::RegularColor::Cmyk(c)) => {
+                        let comps = c.to_pdf_color();
+                        content.set_fill_cmyk(comps[0], comps[1], comps[2], comps[3]);
+                    }
+                    Color::Special(_) => {
+                        panic!("Device color space cannot be used with special colors")
+                    }
+                },
+                ContentColorSpace::Named(n) => {
+                    content.set_fill_color_space(n.to_pdf_name());
+                    content.set_fill_color(color.to_pdf_color());
+                }
+            }
+        }
+
+        self.content_set_fill_stroke_properties(
+            bounds,
+            &fill.paint,
+            fill.opacity,
+            serializer_context,
+            chunk_container,
+            set_pattern_fn,
+            set_solid_fn,
+        );
+    }
+
+    fn content_set_stroke_properties(
+        &mut self,
+        bounds: Rect,
+        stroke: &Stroke,
+        serializer_context: &mut SerializeContext,
+        chunk_container: &mut ChunkContainer,
+    ) {
+        fn set_pattern_fn(content: &mut Content, color_space: String) {
+            content.set_stroke_color_space(pdf_writer::types::ColorSpaceOperand::Pattern);
+            content.set_stroke_pattern(None, color_space.to_pdf_name());
+        }
+
+        fn set_solid_fn(content: &mut Content, color_space: ContentColorSpace, color: &Color) {
+            match color_space {
+                ContentColorSpace::Device => match color {
+                    Color::Regular(crate::color::RegularColor::Rgb(r)) => {
+                        let comps = r.to_pdf_color();
+                        content.set_stroke_rgb(comps[0], comps[1], comps[2]);
+                    }
+                    Color::Regular(crate::color::RegularColor::Luma(l)) => {
+                        content.set_stroke_gray(l.to_pdf_color());
+                    }
+                    Color::Regular(crate::color::RegularColor::Cmyk(c)) => {
+                        let comps = c.to_pdf_color();
+                        content.set_stroke_cmyk(comps[0], comps[1], comps[2], comps[3]);
+                    }
+                    Color::Special(_) => {
+                        panic!("Device color space cannot be used with special colors")
+                    }
+                },
+                ContentColorSpace::Named(n) => {
+                    content.set_stroke_color_space(n.to_pdf_name());
+                    content.set_stroke_color(color.to_pdf_color());
+                }
+            }
+        }
+
+        self.content_set_fill_stroke_properties(
+            bounds,
+            &stroke.paint,
+            stroke.opacity,
+            serializer_context,
+            chunk_container,
+            set_pattern_fn,
+            set_solid_fn,
+        );
+
+        // Only write if they don't correspond to the default values as defined in the
+        // PDF specification.
+        if stroke.width != 1.0 {
+            self.content.set_line_width(stroke.width);
+        }
+
+        if stroke.miter_limit != 10.0 {
+            self.content.set_miter_limit(stroke.miter_limit);
+        }
+
+        if stroke.line_cap != LineCap::Butt {
+            self.content.set_line_cap(stroke.line_cap.to_pdf_line_cap());
+        }
+
+        if stroke.line_join != LineJoin::Miter {
+            self.content
+                .set_line_join(stroke.line_join.to_pdf_line_join());
+        }
+
+        if let Some(stroke_dash) = &stroke.dash {
+            self.content
+                .set_dash_pattern(stroke_dash.array.iter().copied(), stroke_dash.offset);
+        }
+    }
+
+    fn content_draw_path(&mut self, path_data: impl Iterator<Item = PathSegment>) {
+        // Taken from resvg
+        fn calc(n1: f32, n2: f32) -> f32 {
+            (n1 + n2 * 2.0) / 3.0
+        }
+
+        let mut p_prev = None;
+
+        for operation in path_data {
+            match operation {
+                PathSegment::MoveTo(p) => {
+                    self.content.move_to(p.x, p.y);
+                    p_prev = Some(p);
+                }
+                PathSegment::LineTo(p) => {
+                    self.content.line_to(p.x, p.y);
+                    p_prev = Some(p);
+                }
+                PathSegment::QuadTo(p1, p2) => {
+                    // Since PDF doesn't support quad curves, we need to convert them into
+                    // cubic.
+                    let prev = p_prev.unwrap();
+                    self.content.cubic_to(
+                        calc(prev.x, p1.x),
+                        calc(prev.y, p1.y),
+                        calc(p2.x, p1.x),
+                        calc(p2.y, p1.y),
+                        p2.x,
+                        p2.y,
+                    );
+                    p_prev = Some(p2);
+                }
+                PathSegment::CubicTo(p1, p2, p3) => {
+                    self.content.cubic_to(p1.x, p1.y, p2.x, p2.y, p3.x, p3.y);
+                    p_prev = Some(p3);
+                }
+                PathSegment::Close => {
+                    self.content.close_path();
+                }
+            };
+        }
+    }
+}
+
+// Note that this isn't a 100% accurate calculation, it can overestimate (and in a few cases
+// even underestimate), but it should be good enough for the majority of the cases.
+// TODO: Improve this so that `zalgo_text` test case shows up fully in the reference image.
+fn get_glyphs_bbox(glyphs: &[impl Glyph], x: f32, y: f32, size: f32, font: Font) -> Rect {
+    let font_bbox = font.bbox();
+    let (mut bl, mut bt, mut br, mut bb) = font_bbox
+        .transform(Transform::from_scale(
+            size / font.units_per_em(),
+            -size / font.units_per_em(),
+        ))
+        .and_then(|b| b.transform(Transform::from_translate(x, y)))
+        .map(|b| (b.left(), b.top(), b.right(), b.bottom()))
+        .unwrap_or((x, y, x + 1.0, y + 1.0));
+
+    let mut x = x;
+    let mut y = y;
+
+    for glyph in glyphs {
+        let xo = glyph.x_offset(size);
+        let xa = glyph.x_advance(size);
+        let yo = glyph.y_offset(size);
+        let ya = glyph.y_advance(size);
+
+        x += xa;
+        y -= ya;
+
+        bl = bl.min(x + xo);
+        br = br.max(x + xo);
+        bt = bt.min(y - yo);
+        bb = bb.max(y - yo);
+    }
+
+    Rect::from_ltrb(bl, bt, br, bb).unwrap()
+}