biscuitboard 1.0.9 → 1.0.11

package/dist/npm.d.cts

@@ -549,24 +549,28 @@ interface BreadboardCladProps {
  */
 declare const BreadboardClad: ({ children, autorouter, autorouterOptions, minTraceWidth, nominalTraceWidth, routingDisabled, markHeadersNoConnect, headerNoConnects, }: BreadboardCladProps) => react.JSX.Element;
 
-declare const CLAD_40X40_WIDTH = 40;
-declare const CLAD_40X40_HEIGHT = 40;
-declare const CLAD_40X40_MOUNTING_HOLE_DIAMETER = 2;
-declare const CLAD_40X40_EDGE_MOUNTING_HOLE_INSET = 3;
-declare const CLAD_40X40_VIA_HOLE_DIAMETER = 0.3;
-declare const CLAD_40X40_VIA_PAD_DIAMETER = 0.6;
-declare const CLAD_40X40_VIA_SPACING = 1.3;
-declare const CLAD_40X40_VIA_RING_HALF_SIZES: readonly [2.6, 3.9, 5.2];
-declare const CLAD_40X40_MOUNTING_HOLE_POSITIONS: {
+declare const CLAD_32X32_WIDTH = 32;
+declare const CLAD_32X32_HEIGHT = 32;
+declare const CLAD_32X32_MOUNTING_HOLE_DIAMETER = 2;
+declare const CLAD_32X32_MOUNTING_HOLE_INSET = 3;
+declare const CLAD_32X32_VIA_HOLE_DIAMETER = 0.3;
+declare const CLAD_32X32_VIA_PAD_DIAMETER = 0.6;
+declare const CLAD_32X32_VIA_SPACING = 1.3;
+declare const CLAD_32X32_VIA_ARM_INNER_OFFSET = 9.1;
+declare const CLAD_32X32_VIA_ARM_OUTER_OFFSET = 14.3;
+declare const CLAD_32X32_VIA_ARM_WIDTH = 1.3;
+declare const CLAD_32X32_EDGE_CONNECTOR_OPENING: number;
+declare const CLAD_32X32_MOUNTING_HOLE_POSITIONS: {
     x: number;
     y: number;
 }[];
-/** Three concentric square via rings centered on the central mounting hole. */
-declare const CLAD_40X40_VIA_POSITIONS: {
+interface Clad32x32ViaPosition {
     x: number;
     y: number;
-}[];
-interface Clad40x40Props {
+}
+/** Four two-via-wide L-shaped fields leave every side midpoint open. */
+declare const CLAD_32X32_VIA_POSITIONS: Clad32x32ViaPosition[];
+interface Clad32x32Props {
     children?: ReactNode;
     autorouter?: AutorouterProp;
     autorouterOptions?: BiscuitBoardAutorouterOptions;
@@ -575,8 +579,8 @@ interface Clad40x40Props {
     nominalTraceWidth?: number;
     routingDisabled?: boolean;
 }
-/** A two-layer 40 mm square clad with two mounting holes and three via rings. */
-declare const Clad40x40: ({ children, autorouter, autorouterOptions, minTraceWidth, nominalTraceWidth, routingDisabled, }: Clad40x40Props) => react.JSX.Element;
+/** A two-layer 32 mm square clad with four corner holes and L-shaped via fields. */
+declare const Clad32x32: ({ children, autorouter, autorouterOptions, minTraceWidth, nominalTraceWidth, routingDisabled, }: Clad32x32Props) => react.JSX.Element;
 
 interface PrefabricatedViaAutorouterConfig {
     width: number;
@@ -740,4 +744,4 @@ type XiaoCladWithPerforatedPinHeadersProps = XiaoCladWithPinHeadersProps;
 /** A XIAO clad whose header pads include perforations along both side edges. */
 declare const XiaoCladWithPerforatedPinHeaders: ({ markHeadersNoConnect, ...props }: XiaoCladWithPerforatedPinHeadersProps) => react.JSX.Element;
 
-export { ARDUINO_SHIELD_CLAD_HEIGHT, ARDUINO_SHIELD_CLAD_VIA_CANDIDATE_ZONES, ARDUINO_SHIELD_CLAD_VIA_HOLE_DIAMETER, ARDUINO_SHIELD_CLAD_VIA_OUTER_DIAMETER, ARDUINO_SHIELD_CLAD_VIA_POSITIONS, ARDUINO_SHIELD_CLAD_VIA_SPACING, ARDUINO_SHIELD_CLAD_WIDTH, ARDUINO_SHIELD_CONNECTOR_OFFSET_X, ARDUINO_SHIELD_HEADER_PITCH, ARDUINO_SHIELD_HEADER_PLACEMENTS, ARDUINO_SHIELD_HEADER_ROW_Y, ARDUINO_SHIELD_MOUNTING_HOLE_DIAMETER, ARDUINO_SHIELD_MOUNTING_HOLE_POSITIONS, ArduinoShieldAnalogHeader, ArduinoShieldClad, type ArduinoShieldCladProps, type ArduinoShieldCladViaPosition, ArduinoShieldDigital0To7Header, ArduinoShieldDigital8To13Header, ArduinoShieldIcspSocket, ArduinoShieldPowerHeader, BISCUIT_BOARD_HEIGHT, BISCUIT_BOARD_MOUNTING_HOLE_POSITIONS, BISCUIT_BOARD_VIA_POSITIONS, BISCUIT_BOARD_VIA_ZONES, BISCUIT_BOARD_WIDTH, BOOSTERPACK_CLAD_HEIGHT, BOOSTERPACK_CLAD_MOUNTING_HOLE_VIA_CLEARANCE, BOOSTERPACK_CLAD_PLACEMENT_ZONES, BOOSTERPACK_CLAD_VIA_CANDIDATE_ZONES, BOOSTERPACK_CLAD_VIA_EXCLUSION_ZONES, BOOSTERPACK_CLAD_VIA_OUTER_DIAMETER, BOOSTERPACK_CLAD_VIA_PITCH, BOOSTERPACK_CLAD_VIA_POSITIONS, BOOSTERPACK_CLAD_WIDTH, BOOSTERPACK_CORNER_VERTICAL_ARM_INNER_Y, BOOSTERPACK_EDGE_BAND_CENTER_GAP, BOOSTERPACK_EDGE_BAND_OUTER_X, BOOSTERPACK_EDGE_HEADER_CENTER_X, BOOSTERPACK_EDGE_HEADER_PIN_COUNT, BOOSTERPACK_HEADER_CENTER_X, BOOSTERPACK_HEADER_CENTER_Y, BOOSTERPACK_HEADER_PITCH, BOOSTERPACK_MIDDLE_VIA_CLUSTER_CENTER_X, BOOSTERPACK_MIDDLE_VIA_CLUSTER_HEIGHT, BOOSTERPACK_MIDDLE_VIA_CLUSTER_WIDTH, BREADBOARD_CLAD_HEIGHT, BREADBOARD_CLAD_VIA_HOLE_DIAMETER, BREADBOARD_CLAD_VIA_PAD_DIAMETER, BREADBOARD_CLAD_VIA_PITCH, BREADBOARD_CLAD_VIA_POSITIONS, BREADBOARD_CLAD_VIA_ROW_YS, BREADBOARD_CLAD_WIDTH, BREADBOARD_COLUMN_COUNT, BREADBOARD_COLUMN_XS, BREADBOARD_CORNER_VIA_ARM_WIDTH, BREADBOARD_CORNER_VIA_POSITIONS, BREADBOARD_CORNER_VIA_SPACING, BREADBOARD_CORNER_VIA_X_INNER_OFFSET, BREADBOARD_CORNER_VIA_X_OUTER_OFFSET, BREADBOARD_CORNER_VIA_X_OUTWARD_SHIFT, BREADBOARD_CORNER_VIA_Y_INNER_OFFSET, BREADBOARD_CORNER_VIA_Y_OUTER_OFFSET, BREADBOARD_HEADER_HOLE_DIAMETER, BREADBOARD_HEADER_PAD_DIAMETER, BREADBOARD_HEADER_PITCH, BREADBOARD_MOUNTING_HOLE_DIAMETER, BREADBOARD_TERMINAL_HEADER_POSITIONS, BREADBOARD_TERMINAL_ROW_LABELS, BREADBOARD_TERMINAL_ROW_YS, BiscuitBoard, type BiscuitBoardAutorouterOptions, type BiscuitBoardProps, type BiscuitBoardViaPosition, BoosterPackClad, type BoosterPackCladPlacementZone, type BoosterPackCladProps, type BoosterPackCladViaPosition, BoosterPackEdgePinHeader, BoosterPackLeftHeader, BoosterPackRightHeader, BreadboardClad, type BreadboardCladProps, type BreadboardCladViaPosition, type BreadboardHeaderPosition, BreadboardTerminalHeaders, type BreadboardTerminalRowLabel, CLAD_40X40_EDGE_MOUNTING_HOLE_INSET, CLAD_40X40_HEIGHT, CLAD_40X40_MOUNTING_HOLE_DIAMETER, CLAD_40X40_MOUNTING_HOLE_POSITIONS, CLAD_40X40_VIA_HOLE_DIAMETER, CLAD_40X40_VIA_PAD_DIAMETER, CLAD_40X40_VIA_POSITIONS, CLAD_40X40_VIA_RING_HALF_SIZES, CLAD_40X40_VIA_SPACING, CLAD_40X40_WIDTH, Clad40x40, type Clad40x40Props, FEATHER_CLAD_HEIGHT, FEATHER_CLAD_VIA_HOLE_DIAMETER, FEATHER_CLAD_VIA_PAD_DIAMETER, FEATHER_CLAD_VIA_POSITIONS, FEATHER_CLAD_VIA_SPACING, FEATHER_CLAD_WIDTH, FEATHER_HEADER_HOLE_DIAMETER, FEATHER_HEADER_PAD_DIAMETER, FEATHER_HEADER_PITCH, FEATHER_HEADER_POSITIONS, FEATHER_HEADER_ROW_SPACING, FEATHER_MOUNTING_HOLE_DIAMETER, FEATHER_MOUNTING_HOLE_POSITIONS, FEATHER_PIN_LABELS, FEATHER_PIN_NAMES, FeatherCladWithPinHeaders, type FeatherCladWithPinHeadersProps, FeatherPinHeaders, type PrefabricatedViaAutorouterConfig, XIAO_CLAD_HEIGHT, XIAO_CLAD_VIA_HOLE_DIAMETER, XIAO_CLAD_VIA_PAD_DIAMETER, XIAO_CLAD_VIA_POSITIONS, XIAO_CLAD_VIA_SPACING, XIAO_CLAD_WIDTH, XIAO_HEADER_HOLE_DIAMETER, XIAO_HEADER_PAD_DIAMETER, XIAO_HEADER_PITCH, XIAO_HEADER_POSITIONS, XIAO_HEADER_ROW_SPACING, XIAO_PERFORATED_HEADER_PAD_HEIGHT, XIAO_PERFORATED_HEADER_PAD_WIDTH, XIAO_PERFORATION_HOLE_DIAMETER, XIAO_PERFORATION_POSITIONS, XIAO_PIN_LABELS, XIAO_PIN_NAMES, XiaoCladLayout, type XiaoCladLayoutProps, XiaoCladWithPerforatedPinHeaders, type XiaoCladWithPerforatedPinHeadersProps, XiaoCladWithPinHeaders, type XiaoCladWithPinHeadersProps, XiaoPerforatedPinHeaders, XiaoPinHeaders, createBiscuitBoardAutorouter, createPrefabricatedViaAutorouter };
+export { ARDUINO_SHIELD_CLAD_HEIGHT, ARDUINO_SHIELD_CLAD_VIA_CANDIDATE_ZONES, ARDUINO_SHIELD_CLAD_VIA_HOLE_DIAMETER, ARDUINO_SHIELD_CLAD_VIA_OUTER_DIAMETER, ARDUINO_SHIELD_CLAD_VIA_POSITIONS, ARDUINO_SHIELD_CLAD_VIA_SPACING, ARDUINO_SHIELD_CLAD_WIDTH, ARDUINO_SHIELD_CONNECTOR_OFFSET_X, ARDUINO_SHIELD_HEADER_PITCH, ARDUINO_SHIELD_HEADER_PLACEMENTS, ARDUINO_SHIELD_HEADER_ROW_Y, ARDUINO_SHIELD_MOUNTING_HOLE_DIAMETER, ARDUINO_SHIELD_MOUNTING_HOLE_POSITIONS, ArduinoShieldAnalogHeader, ArduinoShieldClad, type ArduinoShieldCladProps, type ArduinoShieldCladViaPosition, ArduinoShieldDigital0To7Header, ArduinoShieldDigital8To13Header, ArduinoShieldIcspSocket, ArduinoShieldPowerHeader, BISCUIT_BOARD_HEIGHT, BISCUIT_BOARD_MOUNTING_HOLE_POSITIONS, BISCUIT_BOARD_VIA_POSITIONS, BISCUIT_BOARD_VIA_ZONES, BISCUIT_BOARD_WIDTH, BOOSTERPACK_CLAD_HEIGHT, BOOSTERPACK_CLAD_MOUNTING_HOLE_VIA_CLEARANCE, BOOSTERPACK_CLAD_PLACEMENT_ZONES, BOOSTERPACK_CLAD_VIA_CANDIDATE_ZONES, BOOSTERPACK_CLAD_VIA_EXCLUSION_ZONES, BOOSTERPACK_CLAD_VIA_OUTER_DIAMETER, BOOSTERPACK_CLAD_VIA_PITCH, BOOSTERPACK_CLAD_VIA_POSITIONS, BOOSTERPACK_CLAD_WIDTH, BOOSTERPACK_CORNER_VERTICAL_ARM_INNER_Y, BOOSTERPACK_EDGE_BAND_CENTER_GAP, BOOSTERPACK_EDGE_BAND_OUTER_X, BOOSTERPACK_EDGE_HEADER_CENTER_X, BOOSTERPACK_EDGE_HEADER_PIN_COUNT, BOOSTERPACK_HEADER_CENTER_X, BOOSTERPACK_HEADER_CENTER_Y, BOOSTERPACK_HEADER_PITCH, BOOSTERPACK_MIDDLE_VIA_CLUSTER_CENTER_X, BOOSTERPACK_MIDDLE_VIA_CLUSTER_HEIGHT, BOOSTERPACK_MIDDLE_VIA_CLUSTER_WIDTH, BREADBOARD_CLAD_HEIGHT, BREADBOARD_CLAD_VIA_HOLE_DIAMETER, BREADBOARD_CLAD_VIA_PAD_DIAMETER, BREADBOARD_CLAD_VIA_PITCH, BREADBOARD_CLAD_VIA_POSITIONS, BREADBOARD_CLAD_VIA_ROW_YS, BREADBOARD_CLAD_WIDTH, BREADBOARD_COLUMN_COUNT, BREADBOARD_COLUMN_XS, BREADBOARD_CORNER_VIA_ARM_WIDTH, BREADBOARD_CORNER_VIA_POSITIONS, BREADBOARD_CORNER_VIA_SPACING, BREADBOARD_CORNER_VIA_X_INNER_OFFSET, BREADBOARD_CORNER_VIA_X_OUTER_OFFSET, BREADBOARD_CORNER_VIA_X_OUTWARD_SHIFT, BREADBOARD_CORNER_VIA_Y_INNER_OFFSET, BREADBOARD_CORNER_VIA_Y_OUTER_OFFSET, BREADBOARD_HEADER_HOLE_DIAMETER, BREADBOARD_HEADER_PAD_DIAMETER, BREADBOARD_HEADER_PITCH, BREADBOARD_MOUNTING_HOLE_DIAMETER, BREADBOARD_TERMINAL_HEADER_POSITIONS, BREADBOARD_TERMINAL_ROW_LABELS, BREADBOARD_TERMINAL_ROW_YS, BiscuitBoard, type BiscuitBoardAutorouterOptions, type BiscuitBoardProps, type BiscuitBoardViaPosition, BoosterPackClad, type BoosterPackCladPlacementZone, type BoosterPackCladProps, type BoosterPackCladViaPosition, BoosterPackEdgePinHeader, BoosterPackLeftHeader, BoosterPackRightHeader, BreadboardClad, type BreadboardCladProps, type BreadboardCladViaPosition, type BreadboardHeaderPosition, BreadboardTerminalHeaders, type BreadboardTerminalRowLabel, CLAD_32X32_EDGE_CONNECTOR_OPENING, CLAD_32X32_HEIGHT, CLAD_32X32_MOUNTING_HOLE_DIAMETER, CLAD_32X32_MOUNTING_HOLE_INSET, CLAD_32X32_MOUNTING_HOLE_POSITIONS, CLAD_32X32_VIA_ARM_INNER_OFFSET, CLAD_32X32_VIA_ARM_OUTER_OFFSET, CLAD_32X32_VIA_ARM_WIDTH, CLAD_32X32_VIA_HOLE_DIAMETER, CLAD_32X32_VIA_PAD_DIAMETER, CLAD_32X32_VIA_POSITIONS, CLAD_32X32_VIA_SPACING, CLAD_32X32_WIDTH, Clad32x32, type Clad32x32Props, type Clad32x32ViaPosition, FEATHER_CLAD_HEIGHT, FEATHER_CLAD_VIA_HOLE_DIAMETER, FEATHER_CLAD_VIA_PAD_DIAMETER, FEATHER_CLAD_VIA_POSITIONS, FEATHER_CLAD_VIA_SPACING, FEATHER_CLAD_WIDTH, FEATHER_HEADER_HOLE_DIAMETER, FEATHER_HEADER_PAD_DIAMETER, FEATHER_HEADER_PITCH, FEATHER_HEADER_POSITIONS, FEATHER_HEADER_ROW_SPACING, FEATHER_MOUNTING_HOLE_DIAMETER, FEATHER_MOUNTING_HOLE_POSITIONS, FEATHER_PIN_LABELS, FEATHER_PIN_NAMES, FeatherCladWithPinHeaders, type FeatherCladWithPinHeadersProps, FeatherPinHeaders, type PrefabricatedViaAutorouterConfig, XIAO_CLAD_HEIGHT, XIAO_CLAD_VIA_HOLE_DIAMETER, XIAO_CLAD_VIA_PAD_DIAMETER, XIAO_CLAD_VIA_POSITIONS, XIAO_CLAD_VIA_SPACING, XIAO_CLAD_WIDTH, XIAO_HEADER_HOLE_DIAMETER, XIAO_HEADER_PAD_DIAMETER, XIAO_HEADER_PITCH, XIAO_HEADER_POSITIONS, XIAO_HEADER_ROW_SPACING, XIAO_PERFORATED_HEADER_PAD_HEIGHT, XIAO_PERFORATED_HEADER_PAD_WIDTH, XIAO_PERFORATION_HOLE_DIAMETER, XIAO_PERFORATION_POSITIONS, XIAO_PIN_LABELS, XIAO_PIN_NAMES, XiaoCladLayout, type XiaoCladLayoutProps, XiaoCladWithPerforatedPinHeaders, type XiaoCladWithPerforatedPinHeadersProps, XiaoCladWithPinHeaders, type XiaoCladWithPinHeadersProps, XiaoPerforatedPinHeaders, XiaoPinHeaders, createBiscuitBoardAutorouter, createPrefabricatedViaAutorouter };

package/dist/npm.d.ts

@@ -549,24 +549,28 @@ interface BreadboardCladProps {
  */
 declare const BreadboardClad: ({ children, autorouter, autorouterOptions, minTraceWidth, nominalTraceWidth, routingDisabled, markHeadersNoConnect, headerNoConnects, }: BreadboardCladProps) => react.JSX.Element;
 
-declare const CLAD_40X40_WIDTH = 40;
-declare const CLAD_40X40_HEIGHT = 40;
-declare const CLAD_40X40_MOUNTING_HOLE_DIAMETER = 2;
-declare const CLAD_40X40_EDGE_MOUNTING_HOLE_INSET = 3;
-declare const CLAD_40X40_VIA_HOLE_DIAMETER = 0.3;
-declare const CLAD_40X40_VIA_PAD_DIAMETER = 0.6;
-declare const CLAD_40X40_VIA_SPACING = 1.3;
-declare const CLAD_40X40_VIA_RING_HALF_SIZES: readonly [2.6, 3.9, 5.2];
-declare const CLAD_40X40_MOUNTING_HOLE_POSITIONS: {
+declare const CLAD_32X32_WIDTH = 32;
+declare const CLAD_32X32_HEIGHT = 32;
+declare const CLAD_32X32_MOUNTING_HOLE_DIAMETER = 2;
+declare const CLAD_32X32_MOUNTING_HOLE_INSET = 3;
+declare const CLAD_32X32_VIA_HOLE_DIAMETER = 0.3;
+declare const CLAD_32X32_VIA_PAD_DIAMETER = 0.6;
+declare const CLAD_32X32_VIA_SPACING = 1.3;
+declare const CLAD_32X32_VIA_ARM_INNER_OFFSET = 9.1;
+declare const CLAD_32X32_VIA_ARM_OUTER_OFFSET = 14.3;
+declare const CLAD_32X32_VIA_ARM_WIDTH = 1.3;
+declare const CLAD_32X32_EDGE_CONNECTOR_OPENING: number;
+declare const CLAD_32X32_MOUNTING_HOLE_POSITIONS: {
     x: number;
     y: number;
 }[];
-/** Three concentric square via rings centered on the central mounting hole. */
-declare const CLAD_40X40_VIA_POSITIONS: {
+interface Clad32x32ViaPosition {
     x: number;
     y: number;
-}[];
-interface Clad40x40Props {
+}
+/** Four two-via-wide L-shaped fields leave every side midpoint open. */
+declare const CLAD_32X32_VIA_POSITIONS: Clad32x32ViaPosition[];
+interface Clad32x32Props {
     children?: ReactNode;
     autorouter?: AutorouterProp;
     autorouterOptions?: BiscuitBoardAutorouterOptions;
@@ -575,8 +579,8 @@ interface Clad40x40Props {
     nominalTraceWidth?: number;
     routingDisabled?: boolean;
 }
-/** A two-layer 40 mm square clad with two mounting holes and three via rings. */
-declare const Clad40x40: ({ children, autorouter, autorouterOptions, minTraceWidth, nominalTraceWidth, routingDisabled, }: Clad40x40Props) => react.JSX.Element;
+/** A two-layer 32 mm square clad with four corner holes and L-shaped via fields. */
+declare const Clad32x32: ({ children, autorouter, autorouterOptions, minTraceWidth, nominalTraceWidth, routingDisabled, }: Clad32x32Props) => react.JSX.Element;
 
 interface PrefabricatedViaAutorouterConfig {
     width: number;
@@ -740,4 +744,4 @@ type XiaoCladWithPerforatedPinHeadersProps = XiaoCladWithPinHeadersProps;
 /** A XIAO clad whose header pads include perforations along both side edges. */
 declare const XiaoCladWithPerforatedPinHeaders: ({ markHeadersNoConnect, ...props }: XiaoCladWithPerforatedPinHeadersProps) => react.JSX.Element;
 
-export { ARDUINO_SHIELD_CLAD_HEIGHT, ARDUINO_SHIELD_CLAD_VIA_CANDIDATE_ZONES, ARDUINO_SHIELD_CLAD_VIA_HOLE_DIAMETER, ARDUINO_SHIELD_CLAD_VIA_OUTER_DIAMETER, ARDUINO_SHIELD_CLAD_VIA_POSITIONS, ARDUINO_SHIELD_CLAD_VIA_SPACING, ARDUINO_SHIELD_CLAD_WIDTH, ARDUINO_SHIELD_CONNECTOR_OFFSET_X, ARDUINO_SHIELD_HEADER_PITCH, ARDUINO_SHIELD_HEADER_PLACEMENTS, ARDUINO_SHIELD_HEADER_ROW_Y, ARDUINO_SHIELD_MOUNTING_HOLE_DIAMETER, ARDUINO_SHIELD_MOUNTING_HOLE_POSITIONS, ArduinoShieldAnalogHeader, ArduinoShieldClad, type ArduinoShieldCladProps, type ArduinoShieldCladViaPosition, ArduinoShieldDigital0To7Header, ArduinoShieldDigital8To13Header, ArduinoShieldIcspSocket, ArduinoShieldPowerHeader, BISCUIT_BOARD_HEIGHT, BISCUIT_BOARD_MOUNTING_HOLE_POSITIONS, BISCUIT_BOARD_VIA_POSITIONS, BISCUIT_BOARD_VIA_ZONES, BISCUIT_BOARD_WIDTH, BOOSTERPACK_CLAD_HEIGHT, BOOSTERPACK_CLAD_MOUNTING_HOLE_VIA_CLEARANCE, BOOSTERPACK_CLAD_PLACEMENT_ZONES, BOOSTERPACK_CLAD_VIA_CANDIDATE_ZONES, BOOSTERPACK_CLAD_VIA_EXCLUSION_ZONES, BOOSTERPACK_CLAD_VIA_OUTER_DIAMETER, BOOSTERPACK_CLAD_VIA_PITCH, BOOSTERPACK_CLAD_VIA_POSITIONS, BOOSTERPACK_CLAD_WIDTH, BOOSTERPACK_CORNER_VERTICAL_ARM_INNER_Y, BOOSTERPACK_EDGE_BAND_CENTER_GAP, BOOSTERPACK_EDGE_BAND_OUTER_X, BOOSTERPACK_EDGE_HEADER_CENTER_X, BOOSTERPACK_EDGE_HEADER_PIN_COUNT, BOOSTERPACK_HEADER_CENTER_X, BOOSTERPACK_HEADER_CENTER_Y, BOOSTERPACK_HEADER_PITCH, BOOSTERPACK_MIDDLE_VIA_CLUSTER_CENTER_X, BOOSTERPACK_MIDDLE_VIA_CLUSTER_HEIGHT, BOOSTERPACK_MIDDLE_VIA_CLUSTER_WIDTH, BREADBOARD_CLAD_HEIGHT, BREADBOARD_CLAD_VIA_HOLE_DIAMETER, BREADBOARD_CLAD_VIA_PAD_DIAMETER, BREADBOARD_CLAD_VIA_PITCH, BREADBOARD_CLAD_VIA_POSITIONS, BREADBOARD_CLAD_VIA_ROW_YS, BREADBOARD_CLAD_WIDTH, BREADBOARD_COLUMN_COUNT, BREADBOARD_COLUMN_XS, BREADBOARD_CORNER_VIA_ARM_WIDTH, BREADBOARD_CORNER_VIA_POSITIONS, BREADBOARD_CORNER_VIA_SPACING, BREADBOARD_CORNER_VIA_X_INNER_OFFSET, BREADBOARD_CORNER_VIA_X_OUTER_OFFSET, BREADBOARD_CORNER_VIA_X_OUTWARD_SHIFT, BREADBOARD_CORNER_VIA_Y_INNER_OFFSET, BREADBOARD_CORNER_VIA_Y_OUTER_OFFSET, BREADBOARD_HEADER_HOLE_DIAMETER, BREADBOARD_HEADER_PAD_DIAMETER, BREADBOARD_HEADER_PITCH, BREADBOARD_MOUNTING_HOLE_DIAMETER, BREADBOARD_TERMINAL_HEADER_POSITIONS, BREADBOARD_TERMINAL_ROW_LABELS, BREADBOARD_TERMINAL_ROW_YS, BiscuitBoard, type BiscuitBoardAutorouterOptions, type BiscuitBoardProps, type BiscuitBoardViaPosition, BoosterPackClad, type BoosterPackCladPlacementZone, type BoosterPackCladProps, type BoosterPackCladViaPosition, BoosterPackEdgePinHeader, BoosterPackLeftHeader, BoosterPackRightHeader, BreadboardClad, type BreadboardCladProps, type BreadboardCladViaPosition, type BreadboardHeaderPosition, BreadboardTerminalHeaders, type BreadboardTerminalRowLabel, CLAD_40X40_EDGE_MOUNTING_HOLE_INSET, CLAD_40X40_HEIGHT, CLAD_40X40_MOUNTING_HOLE_DIAMETER, CLAD_40X40_MOUNTING_HOLE_POSITIONS, CLAD_40X40_VIA_HOLE_DIAMETER, CLAD_40X40_VIA_PAD_DIAMETER, CLAD_40X40_VIA_POSITIONS, CLAD_40X40_VIA_RING_HALF_SIZES, CLAD_40X40_VIA_SPACING, CLAD_40X40_WIDTH, Clad40x40, type Clad40x40Props, FEATHER_CLAD_HEIGHT, FEATHER_CLAD_VIA_HOLE_DIAMETER, FEATHER_CLAD_VIA_PAD_DIAMETER, FEATHER_CLAD_VIA_POSITIONS, FEATHER_CLAD_VIA_SPACING, FEATHER_CLAD_WIDTH, FEATHER_HEADER_HOLE_DIAMETER, FEATHER_HEADER_PAD_DIAMETER, FEATHER_HEADER_PITCH, FEATHER_HEADER_POSITIONS, FEATHER_HEADER_ROW_SPACING, FEATHER_MOUNTING_HOLE_DIAMETER, FEATHER_MOUNTING_HOLE_POSITIONS, FEATHER_PIN_LABELS, FEATHER_PIN_NAMES, FeatherCladWithPinHeaders, type FeatherCladWithPinHeadersProps, FeatherPinHeaders, type PrefabricatedViaAutorouterConfig, XIAO_CLAD_HEIGHT, XIAO_CLAD_VIA_HOLE_DIAMETER, XIAO_CLAD_VIA_PAD_DIAMETER, XIAO_CLAD_VIA_POSITIONS, XIAO_CLAD_VIA_SPACING, XIAO_CLAD_WIDTH, XIAO_HEADER_HOLE_DIAMETER, XIAO_HEADER_PAD_DIAMETER, XIAO_HEADER_PITCH, XIAO_HEADER_POSITIONS, XIAO_HEADER_ROW_SPACING, XIAO_PERFORATED_HEADER_PAD_HEIGHT, XIAO_PERFORATED_HEADER_PAD_WIDTH, XIAO_PERFORATION_HOLE_DIAMETER, XIAO_PERFORATION_POSITIONS, XIAO_PIN_LABELS, XIAO_PIN_NAMES, XiaoCladLayout, type XiaoCladLayoutProps, XiaoCladWithPerforatedPinHeaders, type XiaoCladWithPerforatedPinHeadersProps, XiaoCladWithPinHeaders, type XiaoCladWithPinHeadersProps, XiaoPerforatedPinHeaders, XiaoPinHeaders, createBiscuitBoardAutorouter, createPrefabricatedViaAutorouter };
+export { ARDUINO_SHIELD_CLAD_HEIGHT, ARDUINO_SHIELD_CLAD_VIA_CANDIDATE_ZONES, ARDUINO_SHIELD_CLAD_VIA_HOLE_DIAMETER, ARDUINO_SHIELD_CLAD_VIA_OUTER_DIAMETER, ARDUINO_SHIELD_CLAD_VIA_POSITIONS, ARDUINO_SHIELD_CLAD_VIA_SPACING, ARDUINO_SHIELD_CLAD_WIDTH, ARDUINO_SHIELD_CONNECTOR_OFFSET_X, ARDUINO_SHIELD_HEADER_PITCH, ARDUINO_SHIELD_HEADER_PLACEMENTS, ARDUINO_SHIELD_HEADER_ROW_Y, ARDUINO_SHIELD_MOUNTING_HOLE_DIAMETER, ARDUINO_SHIELD_MOUNTING_HOLE_POSITIONS, ArduinoShieldAnalogHeader, ArduinoShieldClad, type ArduinoShieldCladProps, type ArduinoShieldCladViaPosition, ArduinoShieldDigital0To7Header, ArduinoShieldDigital8To13Header, ArduinoShieldIcspSocket, ArduinoShieldPowerHeader, BISCUIT_BOARD_HEIGHT, BISCUIT_BOARD_MOUNTING_HOLE_POSITIONS, BISCUIT_BOARD_VIA_POSITIONS, BISCUIT_BOARD_VIA_ZONES, BISCUIT_BOARD_WIDTH, BOOSTERPACK_CLAD_HEIGHT, BOOSTERPACK_CLAD_MOUNTING_HOLE_VIA_CLEARANCE, BOOSTERPACK_CLAD_PLACEMENT_ZONES, BOOSTERPACK_CLAD_VIA_CANDIDATE_ZONES, BOOSTERPACK_CLAD_VIA_EXCLUSION_ZONES, BOOSTERPACK_CLAD_VIA_OUTER_DIAMETER, BOOSTERPACK_CLAD_VIA_PITCH, BOOSTERPACK_CLAD_VIA_POSITIONS, BOOSTERPACK_CLAD_WIDTH, BOOSTERPACK_CORNER_VERTICAL_ARM_INNER_Y, BOOSTERPACK_EDGE_BAND_CENTER_GAP, BOOSTERPACK_EDGE_BAND_OUTER_X, BOOSTERPACK_EDGE_HEADER_CENTER_X, BOOSTERPACK_EDGE_HEADER_PIN_COUNT, BOOSTERPACK_HEADER_CENTER_X, BOOSTERPACK_HEADER_CENTER_Y, BOOSTERPACK_HEADER_PITCH, BOOSTERPACK_MIDDLE_VIA_CLUSTER_CENTER_X, BOOSTERPACK_MIDDLE_VIA_CLUSTER_HEIGHT, BOOSTERPACK_MIDDLE_VIA_CLUSTER_WIDTH, BREADBOARD_CLAD_HEIGHT, BREADBOARD_CLAD_VIA_HOLE_DIAMETER, BREADBOARD_CLAD_VIA_PAD_DIAMETER, BREADBOARD_CLAD_VIA_PITCH, BREADBOARD_CLAD_VIA_POSITIONS, BREADBOARD_CLAD_VIA_ROW_YS, BREADBOARD_CLAD_WIDTH, BREADBOARD_COLUMN_COUNT, BREADBOARD_COLUMN_XS, BREADBOARD_CORNER_VIA_ARM_WIDTH, BREADBOARD_CORNER_VIA_POSITIONS, BREADBOARD_CORNER_VIA_SPACING, BREADBOARD_CORNER_VIA_X_INNER_OFFSET, BREADBOARD_CORNER_VIA_X_OUTER_OFFSET, BREADBOARD_CORNER_VIA_X_OUTWARD_SHIFT, BREADBOARD_CORNER_VIA_Y_INNER_OFFSET, BREADBOARD_CORNER_VIA_Y_OUTER_OFFSET, BREADBOARD_HEADER_HOLE_DIAMETER, BREADBOARD_HEADER_PAD_DIAMETER, BREADBOARD_HEADER_PITCH, BREADBOARD_MOUNTING_HOLE_DIAMETER, BREADBOARD_TERMINAL_HEADER_POSITIONS, BREADBOARD_TERMINAL_ROW_LABELS, BREADBOARD_TERMINAL_ROW_YS, BiscuitBoard, type BiscuitBoardAutorouterOptions, type BiscuitBoardProps, type BiscuitBoardViaPosition, BoosterPackClad, type BoosterPackCladPlacementZone, type BoosterPackCladProps, type BoosterPackCladViaPosition, BoosterPackEdgePinHeader, BoosterPackLeftHeader, BoosterPackRightHeader, BreadboardClad, type BreadboardCladProps, type BreadboardCladViaPosition, type BreadboardHeaderPosition, BreadboardTerminalHeaders, type BreadboardTerminalRowLabel, CLAD_32X32_EDGE_CONNECTOR_OPENING, CLAD_32X32_HEIGHT, CLAD_32X32_MOUNTING_HOLE_DIAMETER, CLAD_32X32_MOUNTING_HOLE_INSET, CLAD_32X32_MOUNTING_HOLE_POSITIONS, CLAD_32X32_VIA_ARM_INNER_OFFSET, CLAD_32X32_VIA_ARM_OUTER_OFFSET, CLAD_32X32_VIA_ARM_WIDTH, CLAD_32X32_VIA_HOLE_DIAMETER, CLAD_32X32_VIA_PAD_DIAMETER, CLAD_32X32_VIA_POSITIONS, CLAD_32X32_VIA_SPACING, CLAD_32X32_WIDTH, Clad32x32, type Clad32x32Props, type Clad32x32ViaPosition, FEATHER_CLAD_HEIGHT, FEATHER_CLAD_VIA_HOLE_DIAMETER, FEATHER_CLAD_VIA_PAD_DIAMETER, FEATHER_CLAD_VIA_POSITIONS, FEATHER_CLAD_VIA_SPACING, FEATHER_CLAD_WIDTH, FEATHER_HEADER_HOLE_DIAMETER, FEATHER_HEADER_PAD_DIAMETER, FEATHER_HEADER_PITCH, FEATHER_HEADER_POSITIONS, FEATHER_HEADER_ROW_SPACING, FEATHER_MOUNTING_HOLE_DIAMETER, FEATHER_MOUNTING_HOLE_POSITIONS, FEATHER_PIN_LABELS, FEATHER_PIN_NAMES, FeatherCladWithPinHeaders, type FeatherCladWithPinHeadersProps, FeatherPinHeaders, type PrefabricatedViaAutorouterConfig, XIAO_CLAD_HEIGHT, XIAO_CLAD_VIA_HOLE_DIAMETER, XIAO_CLAD_VIA_PAD_DIAMETER, XIAO_CLAD_VIA_POSITIONS, XIAO_CLAD_VIA_SPACING, XIAO_CLAD_WIDTH, XIAO_HEADER_HOLE_DIAMETER, XIAO_HEADER_PAD_DIAMETER, XIAO_HEADER_PITCH, XIAO_HEADER_POSITIONS, XIAO_HEADER_ROW_SPACING, XIAO_PERFORATED_HEADER_PAD_HEIGHT, XIAO_PERFORATED_HEADER_PAD_WIDTH, XIAO_PERFORATION_HOLE_DIAMETER, XIAO_PERFORATION_POSITIONS, XIAO_PIN_LABELS, XIAO_PIN_NAMES, XiaoCladLayout, type XiaoCladLayoutProps, XiaoCladWithPerforatedPinHeaders, type XiaoCladWithPerforatedPinHeadersProps, XiaoCladWithPinHeaders, type XiaoCladWithPinHeadersProps, XiaoPerforatedPinHeaders, XiaoPinHeaders, createBiscuitBoardAutorouter, createPrefabricatedViaAutorouter };

package/dist/npm.js

@@ -15731,46 +15731,67 @@ var BreadboardClad = ({
   }
 );
 
-// lib/Clad40x40.tsx
+// lib/Clad32x32.tsx
 import { Fragment as Fragment5 } from "react";
 import { jsx as jsx5, jsxs as jsxs5 } from "react/jsx-runtime";
-var CLAD_40X40_WIDTH = 40;
-var CLAD_40X40_HEIGHT = 40;
-var CLAD_40X40_MOUNTING_HOLE_DIAMETER = 2;
-var CLAD_40X40_EDGE_MOUNTING_HOLE_INSET = 3;
-var CLAD_40X40_VIA_HOLE_DIAMETER = 0.3;
-var CLAD_40X40_VIA_PAD_DIAMETER = 0.6;
-var CLAD_40X40_VIA_SPACING = 1.3;
-var CLAD_40X40_VIA_RING_HALF_SIZES = [2.6, 3.9, 5.2];
-var CLAD_40X40_MOUNTING_HOLE_POSITIONS = [
-  { x: 0, y: 0 },
-  {
-    x: CLAD_40X40_WIDTH / 2 - CLAD_40X40_EDGE_MOUNTING_HOLE_INSET,
-    y: CLAD_40X40_HEIGHT / 2 - CLAD_40X40_EDGE_MOUNTING_HOLE_INSET
-  }
+var CLAD_32X32_WIDTH = 32;
+var CLAD_32X32_HEIGHT = 32;
+var CLAD_32X32_MOUNTING_HOLE_DIAMETER = 2;
+var CLAD_32X32_MOUNTING_HOLE_INSET = 3;
+var CLAD_32X32_VIA_HOLE_DIAMETER = 0.3;
+var CLAD_32X32_VIA_PAD_DIAMETER = 0.6;
+var CLAD_32X32_VIA_SPACING = 1.3;
+var CLAD_32X32_VIA_ARM_INNER_OFFSET = 9.1;
+var CLAD_32X32_VIA_ARM_OUTER_OFFSET = 14.3;
+var CLAD_32X32_VIA_ARM_WIDTH = 1.3;
+var CLAD_32X32_EDGE_CONNECTOR_OPENING = CLAD_32X32_VIA_ARM_INNER_OFFSET * 2;
+var mountingHoleCenterOffset = CLAD_32X32_WIDTH / 2 - CLAD_32X32_MOUNTING_HOLE_INSET;
+var CLAD_32X32_MOUNTING_HOLE_POSITIONS = [
+  { x: -mountingHoleCenterOffset, y: -mountingHoleCenterOffset },
+  { x: -mountingHoleCenterOffset, y: mountingHoleCenterOffset },
+  { x: mountingHoleCenterOffset, y: -mountingHoleCenterOffset },
+  { x: mountingHoleCenterOffset, y: mountingHoleCenterOffset }
 ];
-var CLAD_40X40_EDGE_CLEARANCE = 0.2;
-var CLAD_40X40_EDGE_CLEARANCE_VALIDATION_TOLERANCE = 1e-3;
-var createSquareViaRingPositions = (halfSize) => {
-  const axisPositions = Array.from(
-    { length: Math.round(halfSize * 2 / CLAD_40X40_VIA_SPACING) + 1 },
-    (_, index) => Math.round((-halfSize + index * CLAD_40X40_VIA_SPACING) * 1e6) / 1e6
+var CLAD_32X32_EDGE_CLEARANCE = 0.2;
+var CLAD_32X32_EDGE_CLEARANCE_VALIDATION_TOLERANCE = 1e-3;
+var roundCoordinate4 = (value) => Math.round(value * 1e6) / 1e6;
+var createPitchedRange2 = (start, end) => Array.from(
+  {
+    length: Math.round((end - start) / CLAD_32X32_VIA_SPACING) + 1
+  },
+  (_, index) => roundCoordinate4(start + index * CLAD_32X32_VIA_SPACING)
+);
+var cornerAxis = createPitchedRange2(
+  CLAD_32X32_VIA_ARM_INNER_OFFSET,
+  CLAD_32X32_VIA_ARM_OUTER_OFFSET
+);
+var armAxis = createPitchedRange2(
+  CLAD_32X32_VIA_ARM_INNER_OFFSET,
+  CLAD_32X32_VIA_ARM_INNER_OFFSET + CLAD_32X32_VIA_ARM_WIDTH
+);
+var createCornerViaPositions2 = (xSign, ySign) => {
+  const horizontalArm = cornerAxis.flatMap(
+    (x) => armAxis.map((y) => ({ x: x * xSign, y: y * ySign }))
+  );
+  const verticalArm = armAxis.flatMap(
+    (x) => cornerAxis.map((y) => ({ x: x * xSign, y: y * ySign }))
+  );
+  return Array.from(
+    new Map(
+      [...horizontalArm, ...verticalArm].map((point) => [
+        `${point.x},${point.y}`,
+        point
+      ])
+    ).values()
   );
-  return [
-    ...axisPositions.flatMap((x) => [
-      { x, y: -halfSize },
-      { x, y: halfSize }
-    ]),
-    ...axisPositions.slice(1, -1).flatMap((y) => [
-      { x: -halfSize, y },
-      { x: halfSize, y }
-    ])
-  ];
 };
-var CLAD_40X40_VIA_POSITIONS = CLAD_40X40_VIA_RING_HALF_SIZES.flatMap(
-  createSquareViaRingPositions
-);
-var Clad40x40 = ({
+var CLAD_32X32_VIA_POSITIONS = [
+  [-1, -1],
+  [-1, 1],
+  [1, -1],
+  [1, 1]
+].flatMap(([xSign, ySign]) => createCornerViaPositions2(xSign, ySign));
+var Clad32x32 = ({
   children,
   autorouter,
   autorouterOptions,
@@ -15780,35 +15801,35 @@ var Clad40x40 = ({
 }) => /* @__PURE__ */ jsxs5(
   "board",
   {
-    name: "Clad40x40",
-    title: "40 mm x 40 mm copper clad",
-    width: `${CLAD_40X40_WIDTH}mm`,
-    height: `${CLAD_40X40_HEIGHT}mm`,
+    name: "Clad32x32",
+    title: "32 mm x 32 mm copper clad",
+    width: `${CLAD_32X32_WIDTH}mm`,
+    height: `${CLAD_32X32_HEIGHT}mm`,
     borderRadius: "1.5mm",
     layers: 2,
     minTraceWidth: `${minTraceWidth ?? 0.15}mm`,
-    minBoardEdgeClearance: `${CLAD_40X40_EDGE_CLEARANCE - CLAD_40X40_EDGE_CLEARANCE_VALIDATION_TOLERANCE}mm`,
+    minBoardEdgeClearance: `${CLAD_32X32_EDGE_CLEARANCE - CLAD_32X32_EDGE_CLEARANCE_VALIDATION_TOLERANCE}mm`,
     minViaHoleDiameter: "0.2mm",
     minViaPadDiameter: "0.4mm",
     autorouter: autorouter ?? createPrefabricatedViaAutorouter({
-      width: CLAD_40X40_WIDTH,
-      height: CLAD_40X40_HEIGHT,
-      edgeClearance: CLAD_40X40_EDGE_CLEARANCE,
+      width: CLAD_32X32_WIDTH,
+      height: CLAD_32X32_HEIGHT,
+      edgeClearance: CLAD_32X32_EDGE_CLEARANCE,
       options: autorouterOptions,
       minimumTraceWidth: minTraceWidth,
       nominalTraceWidth
     }),
     routingDisabled,
     children: [
-      CLAD_40X40_MOUNTING_HOLE_POSITIONS.map((hole) => /* @__PURE__ */ jsx5(Fragment5, { children: /* @__PURE__ */ jsx5(
+      CLAD_32X32_MOUNTING_HOLE_POSITIONS.map((hole) => /* @__PURE__ */ jsx5(Fragment5, { children: /* @__PURE__ */ jsx5(
         "hole",
         {
           pcbX: hole.x,
           pcbY: hole.y,
-          diameter: `${CLAD_40X40_MOUNTING_HOLE_DIAMETER}mm`
+          diameter: `${CLAD_32X32_MOUNTING_HOLE_DIAMETER}mm`
         }
-      ) }, `clad-40x40-mounting-hole-${hole.x}-${hole.y}`)),
-      CLAD_40X40_VIA_POSITIONS.map((via) => /* @__PURE__ */ jsx5(Fragment5, { children: /* @__PURE__ */ jsx5(
+      ) }, `clad-32x32-mounting-hole-${hole.x}-${hole.y}`)),
+      CLAD_32X32_VIA_POSITIONS.map((via) => /* @__PURE__ */ jsx5(Fragment5, { children: /* @__PURE__ */ jsx5(
         "via",
         {
           netIsAssignable: true,
@@ -15816,36 +15837,24 @@ var Clad40x40 = ({
           pcbY: via.y,
           fromLayer: "top",
           toLayer: "bottom",
-          holeDiameter: `${CLAD_40X40_VIA_HOLE_DIAMETER}mm`,
-          outerDiameter: `${CLAD_40X40_VIA_PAD_DIAMETER}mm`
+          holeDiameter: `${CLAD_32X32_VIA_HOLE_DIAMETER}mm`,
+          outerDiameter: `${CLAD_32X32_VIA_PAD_DIAMETER}mm`
         }
-      ) }, `clad-40x40-prefab-via-${via.x}-${via.y}`)),
+      ) }, `clad-32x32-prefab-via-${via.x}-${via.y}`)),
       /* @__PURE__ */ jsx5(
         "pcbnotedimension",
         {
-          from: {
-            x: -CLAD_40X40_WIDTH / 2,
-            y: CLAD_40X40_HEIGHT / 2 + 2.5
-          },
-          to: {
-            x: CLAD_40X40_WIDTH / 2,
-            y: CLAD_40X40_HEIGHT / 2 + 2.5
-          },
-          text: `${CLAD_40X40_WIDTH}mm`
+          from: { x: -CLAD_32X32_WIDTH / 2, y: CLAD_32X32_HEIGHT / 2 + 2.5 },
+          to: { x: CLAD_32X32_WIDTH / 2, y: CLAD_32X32_HEIGHT / 2 + 2.5 },
+          text: `${CLAD_32X32_WIDTH}mm`
         }
       ),
       /* @__PURE__ */ jsx5(
         "pcbnotedimension",
         {
-          from: {
-            x: CLAD_40X40_WIDTH / 2 + 2.5,
-            y: -CLAD_40X40_HEIGHT / 2
-          },
-          to: {
-            x: CLAD_40X40_WIDTH / 2 + 2.5,
-            y: CLAD_40X40_HEIGHT / 2
-          },
-          text: `${CLAD_40X40_HEIGHT}mm`
+          from: { x: CLAD_32X32_WIDTH / 2 + 2.5, y: -CLAD_32X32_HEIGHT / 2 },
+          to: { x: CLAD_32X32_WIDTH / 2 + 2.5, y: CLAD_32X32_HEIGHT / 2 },
+          text: `${CLAD_32X32_HEIGHT}mm`
         }
       ),
       children
@@ -16389,17 +16398,20 @@ export {
   BoosterPackRightHeader,
   BreadboardClad,
   BreadboardTerminalHeaders,
-  CLAD_40X40_EDGE_MOUNTING_HOLE_INSET,
-  CLAD_40X40_HEIGHT,
-  CLAD_40X40_MOUNTING_HOLE_DIAMETER,
-  CLAD_40X40_MOUNTING_HOLE_POSITIONS,
-  CLAD_40X40_VIA_HOLE_DIAMETER,
-  CLAD_40X40_VIA_PAD_DIAMETER,
-  CLAD_40X40_VIA_POSITIONS,
-  CLAD_40X40_VIA_RING_HALF_SIZES,
-  CLAD_40X40_VIA_SPACING,
-  CLAD_40X40_WIDTH,
-  Clad40x40,
+  CLAD_32X32_EDGE_CONNECTOR_OPENING,
+  CLAD_32X32_HEIGHT,
+  CLAD_32X32_MOUNTING_HOLE_DIAMETER,
+  CLAD_32X32_MOUNTING_HOLE_INSET,
+  CLAD_32X32_MOUNTING_HOLE_POSITIONS,
+  CLAD_32X32_VIA_ARM_INNER_OFFSET,
+  CLAD_32X32_VIA_ARM_OUTER_OFFSET,
+  CLAD_32X32_VIA_ARM_WIDTH,
+  CLAD_32X32_VIA_HOLE_DIAMETER,
+  CLAD_32X32_VIA_PAD_DIAMETER,
+  CLAD_32X32_VIA_POSITIONS,
+  CLAD_32X32_VIA_SPACING,
+  CLAD_32X32_WIDTH,
+  Clad32x32,
   FEATHER_CLAD_HEIGHT,
   FEATHER_CLAD_VIA_HOLE_DIAMETER,
   FEATHER_CLAD_VIA_PAD_DIAMETER,