biscuitboard 1.0.6 → 1.0.7

package/README.md

@@ -217,11 +217,13 @@ upper-right clad hole clears the D0-D7 header. Relative placement remains
 official UNO R3 geometry for the 1x8 power header, 1x6 analog header, 1x8
 D0-D7 header, 1x10 R3 digital/AREF/I2C header, and 2x3 ICSP socket.
 
-The 262 assignable fixed vias use 0.3 mm drills, 0.6 mm copper pads, and 1.3 mm
-center-to-center pitch. The clustered layout has upper- and lower-left edge
-fields, two inset left fields, a central routing field spanning -19 to -3 mm,
-and split right-edge rails. The area immediately left of ICSP, the header rows, and
-the original clad mounting holes remain open. The bare template and its
+The 226 assignable fixed vias use 0.3 mm drills, 0.6 mm copper pads, and 1.3 mm
+center-to-center pitch. A 130-via central routing field spanning -19 to -3 mm
+is retained. Three corners use compact three-via-wide L-shaped fields; the
+upper-right uses one three-row horizontal arm parallel to its two mounting
+holes and lowered around the crowded UNO header region. The area immediately
+left of ICSP, the header rows, and the original clad mounting holes remain
+open. The bare template and its
 checked-in PCB snapshot are in
 [`examples/arduino-shield-clad.tsx`](./examples/arduino-shield-clad.tsx).
 

package/dist/npm.cjs

@@ -14526,41 +14526,46 @@ var ARDUINO_SHIELD_CLAD_VIA_SPACING = 1.3;
 var ARDUINO_SHIELD_EDGE_CLEARANCE = 0.2;
 var ARDUINO_SHIELD_EDGE_CLEARANCE_VALIDATION_TOLERANCE = 1e-3;
 var rangeInclusive = (start, end, increment) => Array.from(
-  { length: Math.max(0, Math.floor((end - start) / increment) + 1) },
+  {
+    length: Math.max(0, Math.floor((end - start) / increment + 1e-9) + 1)
+  },
   (_, index) => Math.round((start + index * increment) * 1e6) / 1e6
 );
 var createViaZone2 = (zone) => rangeInclusive(zone.minX, zone.maxX, zone.spacing).flatMap(
   (x) => rangeInclusive(zone.minY, zone.maxY, zone.spacing).map((y) => ({ x, y }))
 );
 var ARDUINO_SHIELD_CLAD_VIA_CANDIDATE_ZONES = [
+  // Upper-left horizontal and vertical arms.
   {
-    minX: -33.5,
-    maxX: -25.5,
-    minY: 17.5,
-    maxY: 21.5,
+    minX: -36.1,
+    maxX: -29.6,
+    minY: 19.7,
+    maxY: 22.3,
     spacing: ARDUINO_SHIELD_CLAD_VIA_SPACING
   },
   {
-    minX: -33.5,
-    maxX: -25.5,
-    minY: -21.5,
-    maxY: -17.5,
+    minX: -32.2,
+    maxX: -29.6,
+    minY: 19.7,
+    maxY: 26.2,
     spacing: ARDUINO_SHIELD_CLAD_VIA_SPACING
   },
+  // Lower-left horizontal and vertical arms.
   {
-    minX: -21.5,
-    maxX: -13.5,
-    minY: 13.5,
-    maxY: 17.5,
+    minX: -36.1,
+    maxX: -29.6,
+    minY: -22.3,
+    maxY: -19.7,
     spacing: ARDUINO_SHIELD_CLAD_VIA_SPACING
   },
   {
-    minX: -21.5,
-    maxX: -13.5,
-    minY: -17.5,
-    maxY: -13.5,
+    minX: -32.2,
+    maxX: -29.6,
+    minY: -26.2,
+    maxY: -19.7,
     spacing: ARDUINO_SHIELD_CLAD_VIA_SPACING
   },
+  // Preserve the large central routing field exactly.
   {
     minX: -19,
     maxX: -3,
@@ -14568,18 +14573,27 @@ var ARDUINO_SHIELD_CLAD_VIA_CANDIDATE_ZONES = [
     maxY: 6,
     spacing: ARDUINO_SHIELD_CLAD_VIA_SPACING
   },
+  // Upper-right horizontal arm, parallel to the two mounting holes.
   {
-    minX: 34.5,
-    maxX: 34.5,
-    minY: -19.5,
-    maxY: -7.5,
+    minX: 30.9,
+    maxX: 36.1,
+    minY: 19.7,
+    maxY: 22.3,
     spacing: ARDUINO_SHIELD_CLAD_VIA_SPACING
   },
+  // Lower-right horizontal and vertical arms.
   {
-    minX: 34.5,
-    maxX: 34.5,
-    minY: 7.5,
-    maxY: 19.5,
+    minX: 29.6,
+    maxX: 36.1,
+    minY: -22.3,
+    maxY: -19.7,
+    spacing: ARDUINO_SHIELD_CLAD_VIA_SPACING
+  },
+  {
+    minX: 29.6,
+    maxX: 32.2,
+    minY: -26.2,
+    maxY: -19.7,
     spacing: ARDUINO_SHIELD_CLAD_VIA_SPACING
   }
 ];
@@ -14896,17 +14910,23 @@ var ArduinoShieldClad = ({
           fontSize: "0.6mm"
         }
       ),
-      ARDUINO_SHIELD_CLAD_VIA_CANDIDATE_ZONES.map((zone) => /* @__PURE__ */ (0, import_jsx_runtime2.jsx)(import_react2.Fragment, { children: /* @__PURE__ */ (0, import_jsx_runtime2.jsx)(
-        "pcbnoterect",
+      ARDUINO_SHIELD_CLAD_VIA_CANDIDATE_ZONES.map((zone) => /* @__PURE__ */ (0, import_jsx_runtime2.jsx)(
+        import_react2.Fragment,
         {
-          color: "blue",
-          width: Math.max(0.2, zone.maxX - zone.minX),
-          height: Math.max(0.2, zone.maxY - zone.minY),
-          pcbPositionAnchor: "center",
-          pcbX: zone.minX + (zone.maxX - zone.minX) / 2,
-          pcbY: zone.minY + (zone.maxY - zone.minY) / 2
-        }
-      ) }, `arduino-via-zone-${zone.minX}-${zone.minY}`)),
+          children: /* @__PURE__ */ (0, import_jsx_runtime2.jsx)(
+            "pcbnoterect",
+            {
+              color: "blue",
+              width: Math.max(0.2, zone.maxX - zone.minX),
+              height: Math.max(0.2, zone.maxY - zone.minY),
+              pcbPositionAnchor: "center",
+              pcbX: zone.minX + (zone.maxX - zone.minX) / 2,
+              pcbY: zone.minY + (zone.maxY - zone.minY) / 2
+            }
+          )
+        },
+        `arduino-via-zone-${zone.minX}-${zone.maxX}-${zone.minY}-${zone.maxY}`
+      )),
       ARDUINO_SHIELD_CLAD_VIA_POSITIONS.map((via) => /* @__PURE__ */ (0, import_jsx_runtime2.jsx)(import_react2.Fragment, { children: /* @__PURE__ */ (0, import_jsx_runtime2.jsx)(
         "via",
         {